/****************************************************************************** * * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * The full GNU General Public License is included in this distribution in the * file called LICENSE. * * Contact Information: * James P. Ketrenos * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * *****************************************************************************/ /* * Please use this file (iwl-3945.h) for driver implementation definitions. * Please use iwl-3945-commands.h for uCode API definitions. * Please use iwl-3945-hw.h for hardware-related definitions. */ #ifndef __iwl_3945_h__ #define __iwl_3945_h__ #include /* for struct pci_device_id */ #include #include /*used for rfkill*/ #include #include /* Hardware specific file defines the PCI IDs table for that hardware module */ extern struct pci_device_id iwl3945_hw_card_ids[]; #define DRV_NAME "iwl3945" #include "iwl-csr.h" #include "iwl-prph.h" #include "iwl-3945-hw.h" #include "iwl-3945-debug.h" #include "iwl-3945-led.h" /* Change firmware file name, using "-" and incrementing number, * *only* when uCode interface or architecture changes so that it * is not compatible with earlier drivers. * This number will also appear in << 8 position of 1st dword of uCode file */ #define IWL3945_UCODE_API "-1" /* Default noise level to report when noise measurement is not available. * This may be because we're: * 1) Not associated (4965, no beacon statistics being sent to driver) * 2) Scanning (noise measurement does not apply to associated channel) * 3) Receiving CCK (3945 delivers noise info only for OFDM frames) * Use default noise value of -127 ... this is below the range of measurable * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user. * Also, -127 works better than 0 when averaging frames with/without * noise info (e.g. averaging might be done in app); measured dBm values are * always negative ... using a negative value as the default keeps all * averages within an s8's (used in some apps) range of negative values. */ #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127) /* Module parameters accessible from iwl-*.c */ extern int iwl3945_param_hwcrypto; extern int iwl3945_param_queues_num; enum iwl3945_antenna { IWL_ANTENNA_DIVERSITY, IWL_ANTENNA_MAIN, IWL_ANTENNA_AUX }; /* * RTS threshold here is total size [2347] minus 4 FCS bytes * Per spec: * a value of 0 means RTS on all data/management packets * a value > max MSDU size means no RTS * else RTS for data/management frames where MPDU is larger * than RTS value. */ #define IWL_RX_BUF_SIZE 3000U #define DEFAULT_RTS_THRESHOLD 2347U #define MIN_RTS_THRESHOLD 0U #define MAX_RTS_THRESHOLD 2347U #define MAX_MSDU_SIZE 2304U #define MAX_MPDU_SIZE 2346U #define DEFAULT_BEACON_INTERVAL 100U #define DEFAULT_SHORT_RETRY_LIMIT 7U #define DEFAULT_LONG_RETRY_LIMIT 4U struct iwl3945_rx_mem_buffer { dma_addr_t dma_addr; struct sk_buff *skb; struct list_head list; }; /* * Generic queue structure * * Contains common data for Rx and Tx queues */ struct iwl3945_queue { int n_bd; /* number of BDs in this queue */ int write_ptr; /* 1-st empty entry (index) host_w*/ int read_ptr; /* last used entry (index) host_r*/ dma_addr_t dma_addr; /* physical addr for BD's */ int n_window; /* safe queue window */ u32 id; int low_mark; /* low watermark, resume queue if free * space more than this */ int high_mark; /* high watermark, stop queue if free * space less than this */ } __attribute__ ((packed)); int iwl3945_queue_space(const struct iwl3945_queue *q); int iwl3945_x2_queue_used(const struct iwl3945_queue *q, int i); #define MAX_NUM_OF_TBS (20) /* One for each TFD */ struct iwl3945_tx_info { struct sk_buff *skb[MAX_NUM_OF_TBS]; }; /** * struct iwl3945_tx_queue - Tx Queue for DMA * @q: generic Rx/Tx queue descriptor * @bd: base of circular buffer of TFDs * @cmd: array of command/Tx buffers * @dma_addr_cmd: physical address of cmd/tx buffer array * @txb: array of per-TFD driver data * @need_update: indicates need to update read/write index * * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame * descriptors) and required locking structures. */ struct iwl3945_tx_queue { struct iwl3945_queue q; struct iwl3945_tfd_frame *bd; struct iwl3945_cmd *cmd; dma_addr_t dma_addr_cmd; struct iwl3945_tx_info *txb; int need_update; int active; }; #define IWL_NUM_SCAN_RATES (2) struct iwl3945_channel_tgd_info { u8 type; s8 max_power; }; struct iwl3945_channel_tgh_info { s64 last_radar_time; }; /* current Tx power values to use, one for each rate for each channel. * requested power is limited by: * -- regulatory EEPROM limits for this channel * -- hardware capabilities (clip-powers) * -- spectrum management * -- user preference (e.g. iwconfig) * when requested power is set, base power index must also be set. */ struct iwl3945_channel_power_info { struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */ s8 power_table_index; /* actual (compenst'd) index into gain table */ s8 base_power_index; /* gain index for power at factory temp. */ s8 requested_power; /* power (dBm) requested for this chnl/rate */ }; /* current scan Tx power values to use, one for each scan rate for each * channel. */ struct iwl3945_scan_power_info { struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */ s8 power_table_index; /* actual (compenst'd) index into gain table */ s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */ }; /* * One for each channel, holds all channel setup data * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant * with one another! */ #define IWL4965_MAX_RATE (33) struct iwl3945_channel_info { struct iwl3945_channel_tgd_info tgd; struct iwl3945_channel_tgh_info tgh; struct iwl3945_eeprom_channel eeprom; /* EEPROM regulatory limit */ struct iwl3945_eeprom_channel fat_eeprom; /* EEPROM regulatory limit for * FAT channel */ u8 channel; /* channel number */ u8 flags; /* flags copied from EEPROM */ s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) */ s8 min_power; /* always 0 */ s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */ u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */ u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */ enum ieee80211_band band; /* Radio/DSP gain settings for each "normal" data Tx rate. * These include, in addition to RF and DSP gain, a few fields for * remembering/modifying gain settings (indexes). */ struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE]; /* Radio/DSP gain settings for each scan rate, for directed scans. */ struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES]; }; struct iwl3945_clip_group { /* maximum power level to prevent clipping for each rate, derived by * us from this band's saturation power in EEPROM */ const s8 clip_powers[IWL_MAX_RATES]; }; #include "iwl-3945-rs.h" #define IWL_TX_FIFO_AC0 0 #define IWL_TX_FIFO_AC1 1 #define IWL_TX_FIFO_AC2 2 #define IWL_TX_FIFO_AC3 3 #define IWL_TX_FIFO_HCCA_1 5 #define IWL_TX_FIFO_HCCA_2 6 #define IWL_TX_FIFO_NONE 7 /* Minimum number of queues. MAX_NUM is defined in hw specific files */ #define IWL_MIN_NUM_QUEUES 4 /* Power management (not Tx power) structures */ struct iwl3945_power_vec_entry { struct iwl3945_powertable_cmd cmd; u8 no_dtim; }; #define IWL_POWER_RANGE_0 (0) #define IWL_POWER_RANGE_1 (1) #define IWL_POWER_MODE_CAM 0x00 /* Continuously Aware Mode, always on */ #define IWL_POWER_INDEX_3 0x03 #define IWL_POWER_INDEX_5 0x05 #define IWL_POWER_AC 0x06 #define IWL_POWER_BATTERY 0x07 #define IWL_POWER_LIMIT 0x07 #define IWL_POWER_MASK 0x0F #define IWL_POWER_ENABLED 0x10 #define IWL_POWER_LEVEL(x) ((x) & IWL_POWER_MASK) struct iwl3945_power_mgr { spinlock_t lock; struct iwl3945_power_vec_entry pwr_range_0[IWL_POWER_AC]; struct iwl3945_power_vec_entry pwr_range_1[IWL_POWER_AC]; u8 active_index; u32 dtim_val; }; #define IEEE80211_DATA_LEN 2304 #define IEEE80211_4ADDR_LEN 30 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) struct iwl3945_frame { union { struct ieee80211_hdr frame; struct iwl3945_tx_beacon_cmd beacon; u8 raw[IEEE80211_FRAME_LEN]; u8 cmd[360]; } u; struct list_head list; }; #define SEQ_TO_QUEUE(x) ((x >> 8) & 0xbf) #define QUEUE_TO_SEQ(x) ((x & 0xbf) << 8) #define SEQ_TO_INDEX(x) ((u8)(x & 0xff)) #define INDEX_TO_SEQ(x) ((u8)(x & 0xff)) #define SEQ_HUGE_FRAME (0x4000) #define SEQ_RX_FRAME __constant_cpu_to_le16(0x8000) #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) enum { /* CMD_SIZE_NORMAL = 0, */ CMD_SIZE_HUGE = (1 << 0), /* CMD_SYNC = 0, */ CMD_ASYNC = (1 << 1), /* CMD_NO_SKB = 0, */ CMD_WANT_SKB = (1 << 2), }; struct iwl3945_cmd; struct iwl3945_priv; struct iwl3945_cmd_meta { struct iwl3945_cmd_meta *source; union { struct sk_buff *skb; int (*callback)(struct iwl3945_priv *priv, struct iwl3945_cmd *cmd, struct sk_buff *skb); } __attribute__ ((packed)) u; /* The CMD_SIZE_HUGE flag bit indicates that the command * structure is stored at the end of the shared queue memory. */ u32 flags; } __attribute__ ((packed)); /** * struct iwl3945_cmd * * For allocation of the command and tx queues, this establishes the overall * size of the largest command we send to uCode, except for a scan command * (which is relatively huge; space is allocated separately). */ struct iwl3945_cmd { struct iwl3945_cmd_meta meta; struct iwl3945_cmd_header hdr; union { struct iwl3945_addsta_cmd addsta; struct iwl3945_led_cmd led; u32 flags; u8 val8; u16 val16; u32 val32; struct iwl3945_bt_cmd bt; struct iwl3945_rxon_time_cmd rxon_time; struct iwl3945_powertable_cmd powertable; struct iwl3945_qosparam_cmd qosparam; struct iwl3945_tx_cmd tx; struct iwl3945_tx_beacon_cmd tx_beacon; struct iwl3945_rxon_assoc_cmd rxon_assoc; u8 *indirect; u8 payload[360]; } __attribute__ ((packed)) cmd; } __attribute__ ((packed)); struct iwl3945_host_cmd { u8 id; u16 len; struct iwl3945_cmd_meta meta; const void *data; }; #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl3945_cmd) - \ sizeof(struct iwl3945_cmd_meta)) /* * RX related structures and functions */ #define RX_FREE_BUFFERS 64 #define RX_LOW_WATERMARK 8 #define SUP_RATE_11A_MAX_NUM_CHANNELS 8 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12 /** * struct iwl3945_rx_queue - Rx queue * @processed: Internal index to last handled Rx packet * @read: Shared index to newest available Rx buffer * @write: Shared index to oldest written Rx packet * @free_count: Number of pre-allocated buffers in rx_free * @rx_free: list of free SKBs for use * @rx_used: List of Rx buffers with no SKB * @need_update: flag to indicate we need to update read/write index * * NOTE: rx_free and rx_used are used as a FIFO for iwl3945_rx_mem_buffers */ struct iwl3945_rx_queue { __le32 *bd; dma_addr_t dma_addr; struct iwl3945_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS]; struct iwl3945_rx_mem_buffer *queue[RX_QUEUE_SIZE]; u32 processed; u32 read; u32 write; u32 free_count; struct list_head rx_free; struct list_head rx_used; int need_update; spinlock_t lock; }; #define IWL_SUPPORTED_RATES_IE_LEN 8 #define SCAN_INTERVAL 100 #define MAX_A_CHANNELS 252 #define MIN_A_CHANNELS 7 #define MAX_B_CHANNELS 14 #define MIN_B_CHANNELS 1 #define STATUS_HCMD_ACTIVE 0 /* host command in progress */ #define STATUS_HCMD_SYNC_ACTIVE 1 /* sync host command in progress */ #define STATUS_INT_ENABLED 2 #define STATUS_RF_KILL_HW 3 #define STATUS_RF_KILL_SW 4 #define STATUS_INIT 5 #define STATUS_ALIVE 6 #define STATUS_READY 7 #define STATUS_TEMPERATURE 8 #define STATUS_GEO_CONFIGURED 9 #define STATUS_EXIT_PENDING 10 #define STATUS_IN_SUSPEND 11 #define STATUS_STATISTICS 12 #define STATUS_SCANNING 13 #define STATUS_SCAN_ABORTING 14 #define STATUS_SCAN_HW 15 #define STATUS_POWER_PMI 16 #define STATUS_FW_ERROR 17 #define STATUS_CONF_PENDING 18 #define MAX_TID_COUNT 9 #define IWL_INVALID_RATE 0xFF #define IWL_INVALID_VALUE -1 struct iwl3945_tid_data { u16 seq_number; }; struct iwl3945_hw_key { enum ieee80211_key_alg alg; int keylen; u8 key[32]; }; union iwl3945_ht_rate_supp { u16 rates; struct { u8 siso_rate; u8 mimo_rate; }; }; union iwl3945_qos_capabity { struct { u8 edca_count:4; /* bit 0-3 */ u8 q_ack:1; /* bit 4 */ u8 queue_request:1; /* bit 5 */ u8 txop_request:1; /* bit 6 */ u8 reserved:1; /* bit 7 */ } q_AP; struct { u8 acvo_APSD:1; /* bit 0 */ u8 acvi_APSD:1; /* bit 1 */ u8 ac_bk_APSD:1; /* bit 2 */ u8 ac_be_APSD:1; /* bit 3 */ u8 q_ack:1; /* bit 4 */ u8 max_len:2; /* bit 5-6 */ u8 more_data_ack:1; /* bit 7 */ } q_STA; u8 val; }; /* QoS structures */ struct iwl3945_qos_info { int qos_enable; int qos_active; union iwl3945_qos_capabity qos_cap; struct iwl3945_qosparam_cmd def_qos_parm; }; #define STA_PS_STATUS_WAKE 0 #define STA_PS_STATUS_SLEEP 1 struct iwl3945_station_entry { struct iwl3945_addsta_cmd sta; struct iwl3945_tid_data tid[MAX_TID_COUNT]; union { struct { u8 rate; u8 flags; } s; u16 rate_n_flags; } current_rate; u8 used; u8 ps_status; struct iwl3945_hw_key keyinfo; }; /* one for each uCode image (inst/data, boot/init/runtime) */ struct fw_desc { void *v_addr; /* access by driver */ dma_addr_t p_addr; /* access by card's busmaster DMA */ u32 len; /* bytes */ }; /* uCode file layout */ struct iwl3945_ucode { __le32 ver; /* major/minor/subminor */ __le32 inst_size; /* bytes of runtime instructions */ __le32 data_size; /* bytes of runtime data */ __le32 init_size; /* bytes of initialization instructions */ __le32 init_data_size; /* bytes of initialization data */ __le32 boot_size; /* bytes of bootstrap instructions */ u8 data[0]; /* data in same order as "size" elements */ }; struct iwl3945_ibss_seq { u8 mac[ETH_ALEN]; u16 seq_num; u16 frag_num; unsigned long packet_time; struct list_head list; }; /** * struct iwl3945_driver_hw_info * @max_txq_num: Max # Tx queues supported * @tx_cmd_len: Size of Tx command (but not including frame itself) * @tx_ant_num: Number of TX antennas * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2) * @rx_buf_size: * @max_pkt_size: * @max_rxq_log: Log-base-2 of max_rxq_size * @max_stations: * @bcast_sta_id: * @shared_virt: Pointer to driver/uCode shared Tx Byte Counts and Rx status * @shared_phys: Physical Pointer to Tx Byte Counts and Rx status */ struct iwl3945_driver_hw_info { u16 max_txq_num; u16 tx_cmd_len; u16 tx_ant_num; u16 max_rxq_size; u32 rx_buf_size; u32 max_pkt_size; u16 max_rxq_log; u8 max_stations; u8 bcast_sta_id; void *shared_virt; dma_addr_t shared_phys; }; #define IWL_RX_HDR(x) ((struct iwl3945_rx_frame_hdr *)(\ x->u.rx_frame.stats.payload + \ x->u.rx_frame.stats.phy_count)) #define IWL_RX_END(x) ((struct iwl3945_rx_frame_end *)(\ IWL_RX_HDR(x)->payload + \ le16_to_cpu(IWL_RX_HDR(x)->len))) #define IWL_RX_STATS(x) (&x->u.rx_frame.stats) #define IWL_RX_DATA(x) (IWL_RX_HDR(x)->payload) /****************************************************************************** * * Functions implemented in iwl-base.c which are forward declared here * for use by iwl-*.c * *****************************************************************************/ struct iwl3945_addsta_cmd; extern int iwl3945_send_add_station(struct iwl3945_priv *priv, struct iwl3945_addsta_cmd *sta, u8 flags); extern u8 iwl3945_add_station(struct iwl3945_priv *priv, const u8 *bssid, int is_ap, u8 flags); extern int iwl3945_power_init_handle(struct iwl3945_priv *priv); extern int iwl3945_eeprom_init(struct iwl3945_priv *priv); extern int iwl3945_rx_queue_alloc(struct iwl3945_priv *priv); extern void iwl3945_rx_queue_reset(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq); extern int iwl3945_calc_db_from_ratio(int sig_ratio); extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm); extern int iwl3945_tx_queue_init(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq, int count, u32 id); extern void iwl3945_rx_replenish(void *data); extern void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq); extern int iwl3945_send_cmd_pdu(struct iwl3945_priv *priv, u8 id, u16 len, const void *data); extern int __must_check iwl3945_send_cmd(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd); extern unsigned int iwl3945_fill_beacon_frame(struct iwl3945_priv *priv, struct ieee80211_hdr *hdr, const u8 *dest, int left); extern int iwl3945_rx_queue_update_write_ptr(struct iwl3945_priv *priv, struct iwl3945_rx_queue *q); extern int iwl3945_send_statistics_request(struct iwl3945_priv *priv); extern void iwl3945_set_decrypted_flag(struct iwl3945_priv *priv, struct sk_buff *skb, u32 decrypt_res, struct ieee80211_rx_status *stats); extern const u8 iwl3945_broadcast_addr[ETH_ALEN]; /* * Currently used by iwl-3945-rs... look at restructuring so that it doesn't * call this... todo... fix that. */ extern u8 iwl3945_sync_station(struct iwl3945_priv *priv, int sta_id, u16 tx_rate, u8 flags); /****************************************************************************** * * Functions implemented in iwl-[34]*.c which are forward declared here * for use by iwl-base.c * * NOTE: The implementation of these functions are hardware specific * which is why they are in the hardware specific files (vs. iwl-base.c) * * Naming convention -- * iwl3945_ <-- Its part of iwlwifi (should be changed to iwl3945_) * iwl3945_hw_ <-- Hardware specific (implemented in iwl-XXXX.c by all HW) * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) * iwl3945_bg_ <-- Called from work queue context * iwl3945_mac_ <-- mac80211 callback * ****************************************************************************/ extern void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv); extern void iwl3945_hw_setup_deferred_work(struct iwl3945_priv *priv); extern void iwl3945_hw_cancel_deferred_work(struct iwl3945_priv *priv); extern int iwl3945_hw_rxq_stop(struct iwl3945_priv *priv); extern int iwl3945_hw_set_hw_setting(struct iwl3945_priv *priv); extern int iwl3945_hw_nic_init(struct iwl3945_priv *priv); extern int iwl3945_hw_nic_stop_master(struct iwl3945_priv *priv); extern void iwl3945_hw_txq_ctx_free(struct iwl3945_priv *priv); extern void iwl3945_hw_txq_ctx_stop(struct iwl3945_priv *priv); extern int iwl3945_hw_nic_reset(struct iwl3945_priv *priv); extern int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl3945_priv *priv, void *tfd, dma_addr_t addr, u16 len); extern int iwl3945_hw_txq_free_tfd(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq); extern int iwl3945_hw_get_temperature(struct iwl3945_priv *priv); extern int iwl3945_hw_tx_queue_init(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq); extern unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv, struct iwl3945_frame *frame, u8 rate); extern int iwl3945_hw_get_rx_read(struct iwl3945_priv *priv); extern void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv, struct iwl3945_cmd *cmd, struct ieee80211_tx_info *info, struct ieee80211_hdr *hdr, int sta_id, int tx_id); extern int iwl3945_hw_reg_send_txpower(struct iwl3945_priv *priv); extern int iwl3945_hw_reg_set_txpower(struct iwl3945_priv *priv, s8 power); extern void iwl3945_hw_rx_statistics(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb); extern void iwl3945_disable_events(struct iwl3945_priv *priv); extern int iwl4965_get_temperature(const struct iwl3945_priv *priv); /** * iwl3945_hw_find_station - Find station id for a given BSSID * @bssid: MAC address of station ID to find * * NOTE: This should not be hardware specific but the code has * not yet been merged into a single common layer for managing the * station tables. */ extern u8 iwl3945_hw_find_station(struct iwl3945_priv *priv, const u8 *bssid); extern int iwl3945_hw_channel_switch(struct iwl3945_priv *priv, u16 channel); /* * Forward declare iwl-3945.c functions for iwl-base.c */ extern __le32 iwl3945_get_antenna_flags(const struct iwl3945_priv *priv); extern int iwl3945_init_hw_rate_table(struct iwl3945_priv *priv); extern void iwl3945_reg_txpower_periodic(struct iwl3945_priv *priv); extern int iwl3945_txpower_set_from_eeprom(struct iwl3945_priv *priv); extern u8 iwl3945_sync_sta(struct iwl3945_priv *priv, int sta_id, u16 tx_rate, u8 flags); #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT enum { MEASUREMENT_READY = (1 << 0), MEASUREMENT_ACTIVE = (1 << 1), }; #endif #ifdef CONFIG_IWL3945_RFKILL struct iwl3945_priv; void iwl3945_rfkill_set_hw_state(struct iwl3945_priv *priv); void iwl3945_rfkill_unregister(struct iwl3945_priv *priv); int iwl3945_rfkill_init(struct iwl3945_priv *priv); #else static inline void iwl3945_rfkill_set_hw_state(struct iwl3945_priv *priv) {} static inline void iwl3945_rfkill_unregister(struct iwl3945_priv *priv) {} static inline int iwl3945_rfkill_init(struct iwl3945_priv *priv) { return 0; } #endif #define IWL_MAX_NUM_QUEUES IWL39_MAX_NUM_QUEUES struct iwl3945_priv { /* ieee device used by generic ieee processing code */ struct ieee80211_hw *hw; struct ieee80211_channel *ieee_channels; struct ieee80211_rate *ieee_rates; struct iwl_3945_cfg *cfg; /* device configuration */ /* temporary frame storage list */ struct list_head free_frames; int frames_count; enum ieee80211_band band; int alloc_rxb_skb; void (*rx_handlers[REPLY_MAX])(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb); struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT /* spectrum measurement report caching */ struct iwl3945_spectrum_notification measure_report; u8 measurement_status; #endif /* ucode beacon time */ u32 ucode_beacon_time; /* we allocate array of iwl3945_channel_info for NIC's valid channels. * Access via channel # using indirect index array */ struct iwl3945_channel_info *channel_info; /* channel info array */ u8 channel_count; /* # of channels */ /* each calibration channel group in the EEPROM has a derived * clip setting for each rate. */ const struct iwl3945_clip_group clip_groups[5]; /* thermal calibration */ s32 temperature; /* degrees Kelvin */ s32 last_temperature; /* Scan related variables */ unsigned long last_scan_jiffies; unsigned long next_scan_jiffies; unsigned long scan_start; unsigned long scan_pass_start; unsigned long scan_start_tsf; int scan_bands; int one_direct_scan; u8 direct_ssid_len; u8 direct_ssid[IW_ESSID_MAX_SIZE]; struct iwl3945_scan_cmd *scan; /* spinlock */ spinlock_t lock; /* protect general shared data */ spinlock_t hcmd_lock; /* protect hcmd */ struct mutex mutex; /* basic pci-network driver stuff */ struct pci_dev *pci_dev; /* pci hardware address support */ void __iomem *hw_base; /* uCode images, save to reload in case of failure */ struct fw_desc ucode_code; /* runtime inst */ struct fw_desc ucode_data; /* runtime data original */ struct fw_desc ucode_data_backup; /* runtime data save/restore */ struct fw_desc ucode_init; /* initialization inst */ struct fw_desc ucode_init_data; /* initialization data */ struct fw_desc ucode_boot; /* bootstrap inst */ struct iwl3945_rxon_time_cmd rxon_timing; /* We declare this const so it can only be * changed via explicit cast within the * routines that actually update the physical * hardware */ const struct iwl3945_rxon_cmd active_rxon; struct iwl3945_rxon_cmd staging_rxon; int error_recovering; struct iwl3945_rxon_cmd recovery_rxon; /* 1st responses from initialize and runtime uCode images. * 4965's initialize alive response contains some calibration data. */ struct iwl3945_init_alive_resp card_alive_init; struct iwl3945_alive_resp card_alive; #ifdef CONFIG_IWL3945_RFKILL struct rfkill *rfkill; #endif #ifdef CONFIG_IWL3945_LEDS struct iwl3945_led led[IWL_LED_TRG_MAX]; unsigned long last_blink_time; u8 last_blink_rate; u8 allow_blinking; unsigned int rxtxpackets; u64 led_tpt; #endif u16 active_rate; u16 active_rate_basic; u8 call_post_assoc_from_beacon; /* Rate scaling data */ s8 data_retry_limit; u8 retry_rate; wait_queue_head_t wait_command_queue; int activity_timer_active; /* Rx and Tx DMA processing queues */ struct iwl3945_rx_queue rxq; struct iwl3945_tx_queue txq[IWL_MAX_NUM_QUEUES]; unsigned long status; int last_rx_rssi; /* From Rx packet statisitics */ int last_rx_noise; /* From beacon statistics */ struct iwl3945_power_mgr power_data; struct iwl3945_notif_statistics statistics; unsigned long last_statistics_time; /* context information */ u8 essid[IW_ESSID_MAX_SIZE]; u8 essid_len; u16 rates_mask; u32 power_mode; u32 antenna; u8 bssid[ETH_ALEN]; u16 rts_threshold; u8 mac_addr[ETH_ALEN]; /*station table variables */ spinlock_t sta_lock; int num_stations; struct iwl3945_station_entry stations[IWL_STATION_COUNT]; /* Indication if ieee80211_ops->open has been called */ u8 is_open; u8 mac80211_registered; /* Rx'd packet timing information */ u32 last_beacon_time; u64 last_tsf; /* eeprom */ struct iwl3945_eeprom eeprom; enum ieee80211_if_types iw_mode; struct sk_buff *ibss_beacon; /* Last Rx'd beacon timestamp */ u32 timestamp0; u32 timestamp1; u16 beacon_int; struct iwl3945_driver_hw_info hw_setting; struct ieee80211_vif *vif; /* Current association information needed to configure the * hardware */ u16 assoc_id; u16 assoc_capability; u8 ps_mode; struct iwl3945_qos_info qos_data; struct workqueue_struct *workqueue; struct work_struct up; struct work_struct restart; struct work_struct calibrated_work; struct work_struct scan_completed; struct work_struct rx_replenish; struct work_struct rf_kill; struct work_struct abort_scan; struct work_struct update_link_led; struct work_struct auth_work; struct work_struct report_work; struct work_struct request_scan; struct work_struct beacon_update; struct work_struct set_monitor; struct tasklet_struct irq_tasklet; struct delayed_work init_alive_start; struct delayed_work alive_start; struct delayed_work activity_timer; struct delayed_work thermal_periodic; struct delayed_work gather_stats; struct delayed_work scan_check; struct delayed_work post_associate; #define IWL_DEFAULT_TX_POWER 0x0F s8 user_txpower_limit; s8 max_channel_txpower_limit; #ifdef CONFIG_PM u32 pm_state[16]; #endif #ifdef CONFIG_IWL3945_DEBUG /* debugging info */ u32 framecnt_to_us; atomic_t restrict_refcnt; #endif }; /*iwl3945_priv */ static inline int iwl3945_is_associated(struct iwl3945_priv *priv) { return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; } static inline int is_channel_valid(const struct iwl3945_channel_info *ch_info) { if (ch_info == NULL) return 0; return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; } static inline int is_channel_radar(const struct iwl3945_channel_info *ch_info) { return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; } static inline u8 is_channel_a_band(const struct iwl3945_channel_info *ch_info) { return ch_info->band == IEEE80211_BAND_5GHZ; } static inline u8 is_channel_bg_band(const struct iwl3945_channel_info *ch_info) { return ch_info->band == IEEE80211_BAND_2GHZ; } static inline int is_channel_passive(const struct iwl3945_channel_info *ch) { return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0; } static inline int is_channel_ibss(const struct iwl3945_channel_info *ch) { return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0; } extern const struct iwl3945_channel_info *iwl3945_get_channel_info( const struct iwl3945_priv *priv, enum ieee80211_band band, u16 channel); /* Requires full declaration of iwl3945_priv before including */ #include "iwl-3945-io.h" #endif