/* Copyright (C) 2004 - 2007 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Module: rt2x00usb Abstract: Data structures for the rt2x00usb module. */ #ifndef RT2X00USB_H #define RT2X00USB_H /* * This variable should be used with the * usb_driver structure initialization. */ #define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) /* * Register defines. * Some registers require multiple attempts before success, * in those cases REGISTER_BUSY_COUNT attempts should be * taken with a REGISTER_BUSY_DELAY interval. * For USB vendor requests we need to pass a timeout * time in ms, for this we use the REGISTER_TIMEOUT, * however when loading firmware a higher value is * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE. */ #define REGISTER_BUSY_COUNT 5 #define REGISTER_BUSY_DELAY 100 #define REGISTER_TIMEOUT 500 #define REGISTER_TIMEOUT_FIRMWARE 1000 /* * Cache size */ #define CSR_CACHE_SIZE 8 #define CSR_CACHE_SIZE_FIRMWARE 64 /* * USB request types. */ #define USB_VENDOR_REQUEST ( USB_TYPE_VENDOR | USB_RECIP_DEVICE ) #define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST ) #define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST ) /* * USB vendor commands. */ #define USB_DEVICE_MODE 0x01 #define USB_SINGLE_WRITE 0x02 #define USB_SINGLE_READ 0x03 #define USB_MULTI_WRITE 0x06 #define USB_MULTI_READ 0x07 #define USB_EEPROM_WRITE 0x08 #define USB_EEPROM_READ 0x09 #define USB_LED_CONTROL 0x0a /* RT73USB */ #define USB_RX_CONTROL 0x0c /* * Device modes offset */ #define USB_MODE_RESET 0x01 #define USB_MODE_UNPLUG 0x02 #define USB_MODE_FUNCTION 0x03 #define USB_MODE_TEST 0x04 #define USB_MODE_SLEEP 0x07 /* RT73USB */ #define USB_MODE_FIRMWARE 0x08 /* RT73USB */ #define USB_MODE_WAKEUP 0x09 /* RT73USB */ /* * Used to read/write from/to the device. * This is the main function to communicate with the device, * the buffer argument _must_ either be NULL or point to * a buffer allocated by kmalloc. Failure to do so can lead * to unexpected behavior depending on the architecture. */ int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev, const u8 request, const u8 requesttype, const u16 offset, const u16 value, void *buffer, const u16 buffer_length, const int timeout); /* * Used to read/write from/to the device. * This function will use a previously with kmalloc allocated cache * to communicate with the device. The contents of the buffer pointer * will be copied to this cache when writing, or read from the cache * when reading. * Buffers send to rt2x00usb_vendor_request _must_ be allocated with * kmalloc. Hence the reason for using a previously allocated cache * which has been allocated properly. */ int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev, const u8 request, const u8 requesttype, const u16 offset, void *buffer, const u16 buffer_length, const int timeout); /* * Simple wrapper around rt2x00usb_vendor_request to write a single * command to the device. Since we don't use the buffer argument we * don't have to worry about kmalloc here. */ static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev *rt2x00dev, const u8 request, const u16 offset, const u16 value, const int timeout) { return rt2x00usb_vendor_request(rt2x00dev, request, USB_VENDOR_REQUEST_OUT, offset, value, NULL, 0, timeout); } /* * Simple wrapper around rt2x00usb_vendor_request to read the eeprom * from the device. Note that the eeprom argument _must_ be allocated using * kmalloc for correct handling inside the kernel USB layer. */ static inline int rt2x00usb_eeprom_read(const struct rt2x00_dev *rt2x00dev, __le16 *eeprom, const u16 lenght) { int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16)); return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ, USB_VENDOR_REQUEST_IN, 0x0000, 0x0000, eeprom, lenght, timeout); } /* * Radio handlers */ void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev); void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev); /* * TX data handlers. */ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, struct data_ring *ring, struct sk_buff *skb, struct ieee80211_tx_control *control); /* * Device initialization handlers. */ int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev); void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev); /* * USB driver handlers. */ int rt2x00usb_probe(struct usb_interface *usb_intf, const struct usb_device_id *id); void rt2x00usb_disconnect(struct usb_interface *usb_intf); #ifdef CONFIG_PM int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state); int rt2x00usb_resume(struct usb_interface *usb_intf); #else #define rt2x00usb_suspend NULL #define rt2x00usb_resume NULL #endif /* CONFIG_PM */ #endif /* RT2X00USB_H */