/* * Blackfin On-Chip Real Time Clock Driver * Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x * * Copyright 2004-2009 Analog Devices Inc. * * Enter bugs at http://blackfin.uclinux.org/ * * Licensed under the GPL-2 or later. */ /* The biggest issue we deal with in this driver is that register writes are * synced to the RTC frequency of 1Hz. So if you write to a register and * attempt to write again before the first write has completed, the new write * is simply discarded. This can easily be troublesome if userspace disables * one event (say periodic) and then right after enables an event (say alarm). * Since all events are maintained in the same interrupt mask register, if * we wrote to it to disable the first event and then wrote to it again to * enable the second event, that second event would not be enabled as the * write would be discarded and things quickly fall apart. * * To keep this delay from significantly degrading performance (we, in theory, * would have to sleep for up to 1 second everytime we wanted to write a * register), we only check the write pending status before we start to issue * a new write. We bank on the idea that it doesnt matter when the sync * happens so long as we don't attempt another write before it does. The only * time userspace would take this penalty is when they try and do multiple * operations right after another ... but in this case, they need to take the * sync penalty, so we should be OK. * * Also note that the RTC_ISTAT register does not suffer this penalty; its * writes to clear status registers complete immediately. */ /* It may seem odd that there is no SWCNT code in here (which would be exposed * via the periodic interrupt event, or PIE). Since the Blackfin RTC peripheral * runs in units of seconds (N/HZ) but the Linux framework runs in units of HZ * (2^N HZ), there is no point in keeping code that only provides 1 HZ PIEs. * The same exact behavior can be accomplished by using the update interrupt * event (UIE). Maybe down the line the RTC peripheral will suck less in which * case we can re-introduce PIE support. */ #include <linux/bcd.h> #include <linux/completion.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/rtc.h> #include <linux/seq_file.h> #include <asm/blackfin.h> #define dev_dbg_stamp(dev) dev_dbg(dev, "%s:%i: here i am\n", __func__, __LINE__) struct bfin_rtc { struct rtc_device *rtc_dev; struct rtc_time rtc_alarm; u16 rtc_wrote_regs; }; /* Bit values for the ISTAT / ICTL registers */ #define RTC_ISTAT_WRITE_COMPLETE 0x8000 #define RTC_ISTAT_WRITE_PENDING 0x4000 #define RTC_ISTAT_ALARM_DAY 0x0040 #define RTC_ISTAT_24HR 0x0020 #define RTC_ISTAT_HOUR 0x0010 #define RTC_ISTAT_MIN 0x0008 #define RTC_ISTAT_SEC 0x0004 #define RTC_ISTAT_ALARM 0x0002 #define RTC_ISTAT_STOPWATCH 0x0001 /* Shift values for RTC_STAT register */ #define DAY_BITS_OFF 17 #define HOUR_BITS_OFF 12 #define MIN_BITS_OFF 6 #define SEC_BITS_OFF 0 /* Some helper functions to convert between the common RTC notion of time * and the internal Blackfin notion that is encoded in 32bits. */ static inline u32 rtc_time_to_bfin(unsigned long now) { u32 sec = (now % 60); u32 min = (now % (60 * 60)) / 60; u32 hour = (now % (60 * 60 * 24)) / (60 * 60); u32 days = (now / (60 * 60 * 24)); return (sec << SEC_BITS_OFF) + (min << MIN_BITS_OFF) + (hour << HOUR_BITS_OFF) + (days << DAY_BITS_OFF); } static inline unsigned long rtc_bfin_to_time(u32 rtc_bfin) { return (((rtc_bfin >> SEC_BITS_OFF) & 0x003F)) + (((rtc_bfin >> MIN_BITS_OFF) & 0x003F) * 60) + (((rtc_bfin >> HOUR_BITS_OFF) & 0x001F) * 60 * 60) + (((rtc_bfin >> DAY_BITS_OFF) & 0x7FFF) * 60 * 60 * 24); } static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm) { rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm); } /** * bfin_rtc_sync_pending - make sure pending writes have complete * * Wait for the previous write to a RTC register to complete. * Unfortunately, we can't sleep here as that introduces a race condition when * turning on interrupt events. Consider this: * - process sets alarm * - process enables alarm * - process sleeps while waiting for rtc write to sync * - interrupt fires while process is sleeping * - interrupt acks the event by writing to ISTAT * - interrupt sets the WRITE PENDING bit * - interrupt handler finishes * - process wakes up, sees WRITE PENDING bit set, goes to sleep * - interrupt fires while process is sleeping * If anyone can point out the obvious solution here, i'm listening :). This * shouldn't be an issue on an SMP or preempt system as this function should * only be called with the rtc lock held. * * Other options: * - disable PREN so the sync happens at 32.768kHZ ... but this changes the * inc rate for all RTC registers from 1HZ to 32.768kHZ ... * - use the write complete IRQ */ /* static void bfin_rtc_sync_pending_polled(void) { while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE)) if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)) break; bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE); } */ static DECLARE_COMPLETION(bfin_write_complete); static void bfin_rtc_sync_pending(struct device *dev) { dev_dbg_stamp(dev); while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING) wait_for_completion_timeout(&bfin_write_complete, HZ * 5); dev_dbg_stamp(dev); } /** * bfin_rtc_reset - set RTC to sane/known state * * Initialize the RTC. Enable pre-scaler to scale RTC clock * to 1Hz and clear interrupt/status registers. */ static void bfin_rtc_reset(struct device *dev, u16 rtc_ictl) { struct bfin_rtc *rtc = dev_get_drvdata(dev); dev_dbg_stamp(dev); bfin_rtc_sync_pending(dev); bfin_write_RTC_PREN(0x1); bfin_write_RTC_ICTL(rtc_ictl); bfin_write_RTC_ALARM(0); bfin_write_RTC_ISTAT(0xFFFF); rtc->rtc_wrote_regs = 0; } /** * bfin_rtc_interrupt - handle interrupt from RTC * * Since we handle all RTC events here, we have to make sure the requested * interrupt is enabled (in RTC_ICTL) as the event status register (RTC_ISTAT) * always gets updated regardless of the interrupt being enabled. So when one * even we care about (e.g. stopwatch) goes off, we don't want to turn around * and say that other events have happened as well (e.g. second). We do not * have to worry about pending writes to the RTC_ICTL register as interrupts * only fire if they are enabled in the RTC_ICTL register. */ static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id) { struct device *dev = dev_id; struct bfin_rtc *rtc = dev_get_drvdata(dev); unsigned long events = 0; bool write_complete = false; u16 rtc_istat, rtc_ictl; dev_dbg_stamp(dev); rtc_istat = bfin_read_RTC_ISTAT(); rtc_ictl = bfin_read_RTC_ICTL(); if (rtc_istat & RTC_ISTAT_WRITE_COMPLETE) { bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE); write_complete = true; complete(&bfin_write_complete); } if (rtc_ictl & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) { if (rtc_istat & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) { bfin_write_RTC_ISTAT(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY); events |= RTC_AF | RTC_IRQF; } } if (rtc_ictl & RTC_ISTAT_SEC) { if (rtc_istat & RTC_ISTAT_SEC) { bfin_write_RTC_ISTAT(RTC_ISTAT_SEC); events |= RTC_UF | RTC_IRQF; } } if (events) rtc_update_irq(rtc->rtc_dev, 1, events); if (write_complete || events) return IRQ_HANDLED; else return IRQ_NONE; } static void bfin_rtc_int_set(u16 rtc_int) { bfin_write_RTC_ISTAT(rtc_int); bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | rtc_int); } static void bfin_rtc_int_clear(u16 rtc_int) { bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & rtc_int); } static void bfin_rtc_int_set_alarm(struct bfin_rtc *rtc) { /* Blackfin has different bits for whether the alarm is * more than 24 hours away. */ bfin_rtc_int_set(rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY); } static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { struct bfin_rtc *rtc = dev_get_drvdata(dev); int ret = 0; dev_dbg_stamp(dev); bfin_rtc_sync_pending(dev); switch (cmd) { case RTC_UIE_ON: dev_dbg_stamp(dev); bfin_rtc_int_set(RTC_ISTAT_SEC); break; case RTC_UIE_OFF: dev_dbg_stamp(dev); bfin_rtc_int_clear(~RTC_ISTAT_SEC); break; case RTC_AIE_ON: dev_dbg_stamp(dev); bfin_rtc_int_set_alarm(rtc); break; case RTC_AIE_OFF: dev_dbg_stamp(dev); bfin_rtc_int_clear(~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); break; default: dev_dbg_stamp(dev); ret = -ENOIOCTLCMD; } return ret; } static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm) { struct bfin_rtc *rtc = dev_get_drvdata(dev); dev_dbg_stamp(dev); if (rtc->rtc_wrote_regs & 0x1) bfin_rtc_sync_pending(dev); rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm); return 0; } static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm) { struct bfin_rtc *rtc = dev_get_drvdata(dev); int ret; unsigned long now; dev_dbg_stamp(dev); ret = rtc_tm_to_time(tm, &now); if (ret == 0) { if (rtc->rtc_wrote_regs & 0x1) bfin_rtc_sync_pending(dev); bfin_write_RTC_STAT(rtc_time_to_bfin(now)); rtc->rtc_wrote_regs = 0x1; } return ret; } static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { struct bfin_rtc *rtc = dev_get_drvdata(dev); dev_dbg_stamp(dev); alrm->time = rtc->rtc_alarm; bfin_rtc_sync_pending(dev); alrm->enabled = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); return 0; } static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { struct bfin_rtc *rtc = dev_get_drvdata(dev); unsigned long rtc_alarm; dev_dbg_stamp(dev); if (rtc_tm_to_time(&alrm->time, &rtc_alarm)) return -EINVAL; rtc->rtc_alarm = alrm->time; bfin_rtc_sync_pending(dev); bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm)); if (alrm->enabled) bfin_rtc_int_set_alarm(rtc); return 0; } static int bfin_rtc_proc(struct device *dev, struct seq_file *seq) { #define yesno(x) ((x) ? "yes" : "no") u16 ictl = bfin_read_RTC_ICTL(); dev_dbg_stamp(dev); seq_printf(seq, "alarm_IRQ\t: %s\n" "wkalarm_IRQ\t: %s\n" "seconds_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM), yesno(ictl & RTC_ISTAT_ALARM_DAY), yesno(ictl & RTC_ISTAT_SEC)); return 0; #undef yesno } static struct rtc_class_ops bfin_rtc_ops = { .ioctl = bfin_rtc_ioctl, .read_time = bfin_rtc_read_time, .set_time = bfin_rtc_set_time, .read_alarm = bfin_rtc_read_alarm, .set_alarm = bfin_rtc_set_alarm, .proc = bfin_rtc_proc, }; static int __devinit bfin_rtc_probe(struct platform_device *pdev) { struct bfin_rtc *rtc; struct device *dev = &pdev->dev; int ret = 0; unsigned long timeout = jiffies + HZ; dev_dbg_stamp(dev); /* Allocate memory for our RTC struct */ rtc = kzalloc(sizeof(*rtc), GFP_KERNEL); if (unlikely(!rtc)) return -ENOMEM; platform_set_drvdata(pdev, rtc); device_init_wakeup(dev, 1); /* Register our RTC with the RTC framework */ rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE); if (unlikely(IS_ERR(rtc->rtc_dev))) { ret = PTR_ERR(rtc->rtc_dev); goto err; } /* Grab the IRQ and init the hardware */ ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, 0, pdev->name, dev); if (unlikely(ret)) goto err_reg; /* sometimes the bootloader touched things, but the write complete was not * enabled, so let's just do a quick timeout here since the IRQ will not fire ... */ while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING) if (time_after(jiffies, timeout)) break; bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE); bfin_write_RTC_SWCNT(0); return 0; err_reg: rtc_device_unregister(rtc->rtc_dev); err: kfree(rtc); return ret; } static int __devexit bfin_rtc_remove(struct platform_device *pdev) { struct bfin_rtc *rtc = platform_get_drvdata(pdev); struct device *dev = &pdev->dev; bfin_rtc_reset(dev, 0); free_irq(IRQ_RTC, dev); rtc_device_unregister(rtc->rtc_dev); platform_set_drvdata(pdev, NULL); kfree(rtc); return 0; } #ifdef CONFIG_PM static int bfin_rtc_suspend(struct platform_device *pdev, pm_message_t state) { if (device_may_wakeup(&pdev->dev)) { enable_irq_wake(IRQ_RTC); bfin_rtc_sync_pending(&pdev->dev); } else bfin_rtc_int_clear(-1); return 0; } static int bfin_rtc_resume(struct platform_device *pdev) { if (device_may_wakeup(&pdev->dev)) disable_irq_wake(IRQ_RTC); else bfin_write_RTC_ISTAT(-1); return 0; } #else # define bfin_rtc_suspend NULL # define bfin_rtc_resume NULL #endif static struct platform_driver bfin_rtc_driver = { .driver = { .name = "rtc-bfin", .owner = THIS_MODULE, }, .probe = bfin_rtc_probe, .remove = __devexit_p(bfin_rtc_remove), .suspend = bfin_rtc_suspend, .resume = bfin_rtc_resume, }; static int __init bfin_rtc_init(void) { return platform_driver_register(&bfin_rtc_driver); } static void __exit bfin_rtc_exit(void) { platform_driver_unregister(&bfin_rtc_driver); } module_init(bfin_rtc_init); module_exit(bfin_rtc_exit); MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver"); MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:rtc-bfin");