/* * Copyright (c) 2005-2009 Brocade Communications Systems, Inc. * All rights reserved * www.brocade.com * * Linux driver for Brocade Fibre Channel Host Bus Adapter. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License (GPL) Version 2 as * published by the Free Software Foundation * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. */ #ifndef __BFI_H__ #define __BFI_H__ #include #include #pragma pack(1) /** * Msg header common to all msgs */ struct bfi_mhdr_s { u8 msg_class; /* @ref bfi_mclass_t */ u8 msg_id; /* msg opcode with in the class */ union { struct { u8 rsvd; u8 lpu_id; /* msg destination */ } h2i; u16 i2htok; /* token in msgs to host */ } mtag; }; #define bfi_h2i_set(_mh, _mc, _op, _lpuid) do { \ (_mh).msg_class = (_mc); \ (_mh).msg_id = (_op); \ (_mh).mtag.h2i.lpu_id = (_lpuid); \ } while (0) #define bfi_i2h_set(_mh, _mc, _op, _i2htok) do { \ (_mh).msg_class = (_mc); \ (_mh).msg_id = (_op); \ (_mh).mtag.i2htok = (_i2htok); \ } while (0) /* * Message opcodes: 0-127 to firmware, 128-255 to host */ #define BFI_I2H_OPCODE_BASE 128 #define BFA_I2HM(_x) ((_x) + BFI_I2H_OPCODE_BASE) /** **************************************************************************** * * Scatter Gather Element and Page definition * **************************************************************************** */ #define BFI_SGE_INLINE 1 #define BFI_SGE_INLINE_MAX (BFI_SGE_INLINE + 1) /** * SG Flags */ enum { BFI_SGE_DATA = 0, /* data address, not last */ BFI_SGE_DATA_CPL = 1, /* data addr, last in current page */ BFI_SGE_DATA_LAST = 3, /* data address, last */ BFI_SGE_LINK = 2, /* link address */ BFI_SGE_PGDLEN = 2, /* cumulative data length for page */ }; /** * DMA addresses */ union bfi_addr_u { struct { u32 addr_lo; u32 addr_hi; } a32; }; /** * Scatter Gather Element */ struct bfi_sge_s { #ifdef __BIGENDIAN u32 flags : 2, rsvd : 2, sg_len : 28; #else u32 sg_len : 28, rsvd : 2, flags : 2; #endif union bfi_addr_u sga; }; /** * Scatter Gather Page */ #define BFI_SGPG_DATA_SGES 7 #define BFI_SGPG_SGES_MAX (BFI_SGPG_DATA_SGES + 1) #define BFI_SGPG_RSVD_WD_LEN 8 struct bfi_sgpg_s { struct bfi_sge_s sges[BFI_SGPG_SGES_MAX]; u32 rsvd[BFI_SGPG_RSVD_WD_LEN]; }; /* * Large Message structure - 128 Bytes size Msgs */ #define BFI_LMSG_SZ 128 #define BFI_LMSG_PL_WSZ \ ((BFI_LMSG_SZ - sizeof(struct bfi_mhdr_s)) / 4) struct bfi_msg_s { struct bfi_mhdr_s mhdr; u32 pl[BFI_LMSG_PL_WSZ]; }; /** * Mailbox message structure */ #define BFI_MBMSG_SZ 7 struct bfi_mbmsg_s { struct bfi_mhdr_s mh; u32 pl[BFI_MBMSG_SZ]; }; /** * Message Classes */ enum bfi_mclass { BFI_MC_IOC = 1, /* IO Controller (IOC) */ BFI_MC_DIAG = 2, /* Diagnostic Msgs */ BFI_MC_FLASH = 3, /* Flash message class */ BFI_MC_CEE = 4, BFI_MC_FC_PORT = 5, /* FC port */ BFI_MC_IOCFC = 6, /* FC - IO Controller (IOC) */ BFI_MC_LL = 7, /* Link Layer */ BFI_MC_UF = 8, /* Unsolicited frame receive */ BFI_MC_FCXP = 9, /* FC Transport */ BFI_MC_LPS = 10, /* lport fc login services */ BFI_MC_RPORT = 11, /* Remote port */ BFI_MC_ITNIM = 12, /* I-T nexus (Initiator mode) */ BFI_MC_IOIM_READ = 13, /* read IO (Initiator mode) */ BFI_MC_IOIM_WRITE = 14, /* write IO (Initiator mode) */ BFI_MC_IOIM_IO = 15, /* IO (Initiator mode) */ BFI_MC_IOIM = 16, /* IO (Initiator mode) */ BFI_MC_IOIM_IOCOM = 17, /* good IO completion */ BFI_MC_TSKIM = 18, /* Initiator Task management */ BFI_MC_SBOOT = 19, /* SAN boot services */ BFI_MC_IPFC = 20, /* IP over FC Msgs */ BFI_MC_PORT = 21, /* Physical port */ BFI_MC_MAX = 32 }; #define BFI_IOC_MAX_CQS 4 #define BFI_IOC_MAX_CQS_ASIC 8 #define BFI_IOC_MSGLEN_MAX 32 /* 32 bytes */ #pragma pack() #endif /* __BFI_H__ */