/* * QLogic Fibre Channel HBA Driver * Copyright (c) 2003-2008 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ #ifndef __QLA_FW_H #define __QLA_FW_H #define MBS_CHECKSUM_ERROR 0x4010 #define MBS_INVALID_PRODUCT_KEY 0x4020 /* * Firmware Options. */ #define FO1_ENABLE_PUREX BIT_10 #define FO1_DISABLE_LED_CTRL BIT_6 #define FO1_ENABLE_8016 BIT_0 #define FO2_ENABLE_SEL_CLASS2 BIT_5 #define FO3_NO_ABTS_ON_LINKDOWN BIT_14 #define FO3_HOLD_STS_IOCB BIT_12 /* * Port Database structure definition for ISP 24xx. */ #define PDO_FORCE_ADISC BIT_1 #define PDO_FORCE_PLOGI BIT_0 #define PORT_DATABASE_24XX_SIZE 64 struct port_database_24xx { uint16_t flags; #define PDF_TASK_RETRY_ID BIT_14 #define PDF_FC_TAPE BIT_7 #define PDF_ACK0_CAPABLE BIT_6 #define PDF_FCP2_CONF BIT_5 #define PDF_CLASS_2 BIT_4 #define PDF_HARD_ADDR BIT_1 uint8_t current_login_state; uint8_t last_login_state; #define PDS_PLOGI_PENDING 0x03 #define PDS_PLOGI_COMPLETE 0x04 #define PDS_PRLI_PENDING 0x05 #define PDS_PRLI_COMPLETE 0x06 #define PDS_PORT_UNAVAILABLE 0x07 #define PDS_PRLO_PENDING 0x09 #define PDS_LOGO_PENDING 0x11 #define PDS_PRLI2_PENDING 0x12 uint8_t hard_address[3]; uint8_t reserved_1; uint8_t port_id[3]; uint8_t sequence_id; uint16_t port_timer; uint16_t nport_handle; /* N_PORT handle. */ uint16_t receive_data_size; uint16_t reserved_2; uint8_t prli_svc_param_word_0[2]; /* Big endian */ /* Bits 15-0 of word 0 */ uint8_t prli_svc_param_word_3[2]; /* Big endian */ /* Bits 15-0 of word 3 */ uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; uint8_t reserved_3[24]; }; struct vp_database_24xx { uint16_t vp_status; uint8_t options; uint8_t id; uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; uint16_t port_id_low; uint16_t port_id_high; }; struct nvram_24xx { /* NVRAM header. */ uint8_t id[4]; uint16_t nvram_version; uint16_t reserved_0; /* Firmware Initialization Control Block. */ uint16_t version; uint16_t reserved_1; uint16_t frame_payload_size; uint16_t execution_throttle; uint16_t exchange_count; uint16_t hard_address; uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; uint16_t login_retry_count; uint16_t link_down_on_nos; uint16_t interrupt_delay_timer; uint16_t login_timeout; uint32_t firmware_options_1; uint32_t firmware_options_2; uint32_t firmware_options_3; /* Offset 56. */ /* * BIT 0 = Control Enable * BIT 1-15 = * * BIT 0-7 = Reserved * BIT 8-10 = Output Swing 1G * BIT 11-13 = Output Emphasis 1G * BIT 14-15 = Reserved * * BIT 0-7 = Reserved * BIT 8-10 = Output Swing 2G * BIT 11-13 = Output Emphasis 2G * BIT 14-15 = Reserved * * BIT 0-7 = Reserved * BIT 8-10 = Output Swing 4G * BIT 11-13 = Output Emphasis 4G * BIT 14-15 = Reserved */ uint16_t seriallink_options[4]; uint16_t reserved_2[16]; /* Offset 96. */ uint16_t reserved_3[16]; /* PCIe table entries. */ uint16_t reserved_4[16]; /* Offset 160. */ uint16_t reserved_5[16]; /* Offset 192. */ uint16_t reserved_6[16]; /* Offset 224. */ uint16_t reserved_7[16]; /* * BIT 0 = Enable spinup delay * BIT 1 = Disable BIOS * BIT 2 = Enable Memory Map BIOS * BIT 3 = Enable Selectable Boot * BIT 4 = Disable RISC code load * BIT 5 = Disable Serdes * BIT 6 = * BIT 7 = * * BIT 8 = * BIT 9 = * BIT 10 = Enable lip full login * BIT 11 = Enable target reset * BIT 12 = * BIT 13 = * BIT 14 = * BIT 15 = Enable alternate WWN * * BIT 16-31 = */ uint32_t host_p; uint8_t alternate_port_name[WWN_SIZE]; uint8_t alternate_node_name[WWN_SIZE]; uint8_t boot_port_name[WWN_SIZE]; uint16_t boot_lun_number; uint16_t reserved_8; uint8_t alt1_boot_port_name[WWN_SIZE]; uint16_t alt1_boot_lun_number; uint16_t reserved_9; uint8_t alt2_boot_port_name[WWN_SIZE]; uint16_t alt2_boot_lun_number; uint16_t reserved_10; uint8_t alt3_boot_port_name[WWN_SIZE]; uint16_t alt3_boot_lun_number; uint16_t reserved_11; /* * BIT 0 = Selective Login * BIT 1 = Alt-Boot Enable * BIT 2 = Reserved * BIT 3 = Boot Order List * BIT 4 = Reserved * BIT 5 = Selective LUN * BIT 6 = Reserved * BIT 7-31 = */ uint32_t efi_parameters; uint8_t reset_delay; uint8_t reserved_12; uint16_t reserved_13; uint16_t boot_id_number; uint16_t reserved_14; uint16_t max_luns_per_target; uint16_t reserved_15; uint16_t port_down_retry_count; uint16_t link_down_timeout; /* FCode parameters. */ uint16_t fcode_parameter; uint16_t reserved_16[3]; /* Offset 352. */ uint8_t prev_drv_ver_major; uint8_t prev_drv_ver_submajob; uint8_t prev_drv_ver_minor; uint8_t prev_drv_ver_subminor; uint16_t prev_bios_ver_major; uint16_t prev_bios_ver_minor; uint16_t prev_efi_ver_major; uint16_t prev_efi_ver_minor; uint16_t prev_fw_ver_major; uint8_t prev_fw_ver_minor; uint8_t prev_fw_ver_subminor; uint16_t reserved_17[8]; /* Offset 384. */ uint16_t reserved_18[16]; /* Offset 416. */ uint16_t reserved_19[16]; /* Offset 448. */ uint16_t reserved_20[16]; /* Offset 480. */ uint8_t model_name[16]; uint16_t reserved_21[2]; /* Offset 500. */ /* HW Parameter Block. */ uint16_t pcie_table_sig; uint16_t pcie_table_offset; uint16_t subsystem_vendor_id; uint16_t subsystem_device_id; uint32_t checksum; }; /* * ISP Initialization Control Block. * Little endian except where noted. */ #define ICB_VERSION 1 struct init_cb_24xx { uint16_t version; uint16_t reserved_1; uint16_t frame_payload_size; uint16_t execution_throttle; uint16_t exchange_count; uint16_t hard_address; uint8_t port_name[WWN_SIZE]; /* Big endian. */ uint8_t node_name[WWN_SIZE]; /* Big endian. */ uint16_t response_q_inpointer; uint16_t request_q_outpointer; uint16_t login_retry_count; uint16_t prio_request_q_outpointer; uint16_t response_q_length; uint16_t request_q_length; uint16_t link_down_on_nos; /* Milliseconds. */ uint16_t prio_request_q_length; uint32_t request_q_address[2]; uint32_t response_q_address[2]; uint32_t prio_request_q_address[2]; uint8_t reserved_2[8]; uint16_t atio_q_inpointer; uint16_t atio_q_length; uint32_t atio_q_address[2]; uint16_t interrupt_delay_timer; /* 100us increments. */ uint16_t login_timeout; /* * BIT 0 = Enable Hard Loop Id * BIT 1 = Enable Fairness * BIT 2 = Enable Full-Duplex * BIT 3 = Reserved * BIT 4 = Enable Target Mode * BIT 5 = Disable Initiator Mode * BIT 6 = Reserved * BIT 7 = Reserved * * BIT 8 = Reserved * BIT 9 = Non Participating LIP * BIT 10 = Descending Loop ID Search * BIT 11 = Acquire Loop ID in LIPA * BIT 12 = Reserved * BIT 13 = Full Login after LIP * BIT 14 = Node Name Option * BIT 15-31 = Reserved */ uint32_t firmware_options_1; /* * BIT 0 = Operation Mode bit 0 * BIT 1 = Operation Mode bit 1 * BIT 2 = Operation Mode bit 2 * BIT 3 = Operation Mode bit 3 * BIT 4 = Connection Options bit 0 * BIT 5 = Connection Options bit 1 * BIT 6 = Connection Options bit 2 * BIT 7 = Enable Non part on LIHA failure * * BIT 8 = Enable Class 2 * BIT 9 = Enable ACK0 * BIT 10 = Reserved * BIT 11 = Enable FC-SP Security * BIT 12 = FC Tape Enable * BIT 13 = Reserved * BIT 14 = Enable Target PRLI Control * BIT 15-31 = Reserved */ uint32_t firmware_options_2; /* * BIT 0 = Reserved * BIT 1 = Soft ID only * BIT 2 = Reserved * BIT 3 = Reserved * BIT 4 = FCP RSP Payload bit 0 * BIT 5 = FCP RSP Payload bit 1 * BIT 6 = Enable Receive Out-of-Order data frame handling * BIT 7 = Disable Automatic PLOGI on Local Loop * * BIT 8 = Reserved * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling * BIT 10 = Reserved * BIT 11 = Reserved * BIT 12 = Reserved * BIT 13 = Data Rate bit 0 * BIT 14 = Data Rate bit 1 * BIT 15 = Data Rate bit 2 * BIT 16 = Enable 75 ohm Termination Select * BIT 17-31 = Reserved */ uint32_t firmware_options_3; uint8_t reserved_3[24]; }; /* * ISP queue - command entry structure definition. */ #define COMMAND_TYPE_6 0x48 /* Command Type 6 entry */ struct cmd_type_6 { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t nport_handle; /* N_PORT handle. */ uint16_t timeout; /* Command timeout. */ uint16_t dseg_count; /* Data segment count. */ uint16_t fcp_rsp_dsd_len; /* FCP_RSP DSD length. */ struct scsi_lun lun; /* FCP LUN (BE). */ uint16_t control_flags; /* Control flags. */ #define CF_DATA_SEG_DESCR_ENABLE BIT_2 #define CF_READ_DATA BIT_1 #define CF_WRITE_DATA BIT_0 uint16_t fcp_cmnd_dseg_len; /* Data segment length. */ uint32_t fcp_cmnd_dseg_address[2]; /* Data segment address. */ uint32_t fcp_rsp_dseg_address[2]; /* Data segment address. */ uint32_t byte_count; /* Total byte count. */ uint8_t port_id[3]; /* PortID of destination port. */ uint8_t vp_index; uint32_t fcp_data_dseg_address[2]; /* Data segment address. */ uint16_t fcp_data_dseg_len; /* Data segment length. */ uint16_t reserved_1; /* MUST be set to 0. */ }; #define COMMAND_TYPE_7 0x18 /* Command Type 7 entry */ struct cmd_type_7 { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t nport_handle; /* N_PORT handle. */ uint16_t timeout; /* Command timeout. */ #define FW_MAX_TIMEOUT 0x1999 uint16_t dseg_count; /* Data segment count. */ uint16_t reserved_1; struct scsi_lun lun; /* FCP LUN (BE). */ uint16_t task_mgmt_flags; /* Task management flags. */ #define TMF_CLEAR_ACA BIT_14 #define TMF_TARGET_RESET BIT_13 #define TMF_LUN_RESET BIT_12 #define TMF_CLEAR_TASK_SET BIT_10 #define TMF_ABORT_TASK_SET BIT_9 #define TMF_DSD_LIST_ENABLE BIT_2 #define TMF_READ_DATA BIT_1 #define TMF_WRITE_DATA BIT_0 uint8_t task; #define TSK_SIMPLE 0 #define TSK_HEAD_OF_QUEUE 1 #define TSK_ORDERED 2 #define TSK_ACA 4 #define TSK_UNTAGGED 5 uint8_t crn; uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */ uint32_t byte_count; /* Total byte count. */ uint8_t port_id[3]; /* PortID of destination port. */ uint8_t vp_index; uint32_t dseg_0_address[2]; /* Data segment 0 address. */ uint32_t dseg_0_len; /* Data segment 0 length. */ }; /* * ISP queue - status entry structure definition. */ #define STATUS_TYPE 0x03 /* Status entry. */ struct sts_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t comp_status; /* Completion status. */ uint16_t ox_id; /* OX_ID used by the firmware. */ uint32_t residual_len; /* FW calc residual transfer length. */ uint16_t reserved_1; uint16_t state_flags; /* State flags. */ #define SF_TRANSFERRED_DATA BIT_11 #define SF_FCP_RSP_DMA BIT_0 uint16_t reserved_2; uint16_t scsi_status; /* SCSI status. */ #define SS_CONFIRMATION_REQ BIT_12 uint32_t rsp_residual_count; /* FCP RSP residual count. */ uint32_t sense_len; /* FCP SENSE length. */ uint32_t rsp_data_len; /* FCP response data length. */ uint8_t data[28]; /* FCP response/sense information. */ }; /* * Status entry completion status */ #define CS_DATA_REASSEMBLY_ERROR 0x11 /* Data Reassembly Error.. */ #define CS_ABTS_BY_TARGET 0x13 /* Target send ABTS to abort IOCB. */ #define CS_FW_RESOURCE 0x2C /* Firmware Resource Unavailable. */ #define CS_TASK_MGMT_OVERRUN 0x30 /* Task management overrun (8+). */ #define CS_ABORT_BY_TARGET 0x47 /* Abort By Target. */ /* * ISP queue - marker entry structure definition. */ #define MARKER_TYPE 0x04 /* Marker entry. */ struct mrk_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t handle_count; /* Handle count. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t nport_handle; /* N_PORT handle. */ uint8_t modifier; /* Modifier (7-0). */ #define MK_SYNC_ID_LUN 0 /* Synchronize ID/LUN */ #define MK_SYNC_ID 1 /* Synchronize ID */ #define MK_SYNC_ALL 2 /* Synchronize all ID/LUN */ uint8_t reserved_1; uint8_t reserved_2; uint8_t vp_index; uint16_t reserved_3; uint8_t lun[8]; /* FCP LUN (BE). */ uint8_t reserved_4[40]; }; /* * ISP queue - CT Pass-Through entry structure definition. */ #define CT_IOCB_TYPE 0x29 /* CT Pass-Through IOCB entry */ struct ct_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System Defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t comp_status; /* Completion status. */ uint16_t nport_handle; /* N_PORT handle. */ uint16_t cmd_dsd_count; uint8_t vp_index; uint8_t reserved_1; uint16_t timeout; /* Command timeout. */ uint16_t reserved_2; uint16_t rsp_dsd_count; uint8_t reserved_3[10]; uint32_t rsp_byte_count; uint32_t cmd_byte_count; uint32_t dseg_0_address[2]; /* Data segment 0 address. */ uint32_t dseg_0_len; /* Data segment 0 length. */ uint32_t dseg_1_address[2]; /* Data segment 1 address. */ uint32_t dseg_1_len; /* Data segment 1 length. */ }; /* * ISP queue - ELS Pass-Through entry structure definition. */ #define ELS_IOCB_TYPE 0x53 /* ELS Pass-Through IOCB entry */ struct els_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System Defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t reserved_1; uint16_t nport_handle; /* N_PORT handle. */ uint16_t tx_dsd_count; uint8_t vp_index; uint8_t sof_type; #define EST_SOFI3 (1 << 4) #define EST_SOFI2 (3 << 4) uint32_t rx_xchg_address; /* Receive exchange address. */ uint16_t rx_dsd_count; uint8_t opcode; uint8_t reserved_2; uint8_t port_id[3]; uint8_t reserved_3; uint16_t reserved_4; uint16_t control_flags; /* Control flags. */ #define ECF_PAYLOAD_DESCR_MASK (BIT_15|BIT_14|BIT_13) #define EPD_ELS_COMMAND (0 << 13) #define EPD_ELS_ACC (1 << 13) #define EPD_ELS_RJT (2 << 13) #define EPD_RX_XCHG (3 << 13) #define ECF_CLR_PASSTHRU_PEND BIT_12 #define ECF_INCL_FRAME_HDR BIT_11 uint32_t rx_byte_count; uint32_t tx_byte_count; uint32_t tx_address[2]; /* Data segment 0 address. */ uint32_t tx_len; /* Data segment 0 length. */ uint32_t rx_address[2]; /* Data segment 1 address. */ uint32_t rx_len; /* Data segment 1 length. */ }; /* * ISP queue - Mailbox Command entry structure definition. */ #define MBX_IOCB_TYPE 0x39 struct mbx_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t handle_count; /* Handle count. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t mbx[28]; }; #define LOGINOUT_PORT_IOCB_TYPE 0x52 /* Login/Logout Port entry. */ struct logio_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t comp_status; /* Completion status. */ #define CS_LOGIO_ERROR 0x31 /* Login/Logout IOCB error. */ uint16_t nport_handle; /* N_PORT handle. */ uint16_t control_flags; /* Control flags. */ /* Modifiers. */ #define LCF_INCLUDE_SNS BIT_10 /* Include SNS (FFFFFC) during LOGO. */ #define LCF_FCP2_OVERRIDE BIT_9 /* Set/Reset word 3 of PRLI. */ #define LCF_CLASS_2 BIT_8 /* Enable class 2 during PLOGI. */ #define LCF_FREE_NPORT BIT_7 /* Release NPORT handle after LOGO. */ #define LCF_EXPL_LOGO BIT_6 /* Perform an explicit LOGO. */ #define LCF_SKIP_PRLI BIT_5 /* Skip PRLI after PLOGI. */ #define LCF_IMPL_LOGO_ALL BIT_5 /* Implicit LOGO to all ports. */ #define LCF_COND_PLOGI BIT_4 /* PLOGI only if not logged-in. */ #define LCF_IMPL_LOGO BIT_4 /* Perform an implicit LOGO. */ #define LCF_IMPL_PRLO BIT_4 /* Perform an implicit PRLO. */ /* Commands. */ #define LCF_COMMAND_PLOGI 0x00 /* PLOGI. */ #define LCF_COMMAND_PRLI 0x01 /* PRLI. */ #define LCF_COMMAND_PDISC 0x02 /* PDISC. */ #define LCF_COMMAND_ADISC 0x03 /* ADISC. */ #define LCF_COMMAND_LOGO 0x08 /* LOGO. */ #define LCF_COMMAND_PRLO 0x09 /* PRLO. */ #define LCF_COMMAND_TPRLO 0x0A /* TPRLO. */ uint8_t vp_index; uint8_t reserved_1; uint8_t port_id[3]; /* PortID of destination port. */ uint8_t rsp_size; /* Response size in 32bit words. */ uint32_t io_parameter[11]; /* General I/O parameters. */ #define LSC_SCODE_NOLINK 0x01 #define LSC_SCODE_NOIOCB 0x02 #define LSC_SCODE_NOXCB 0x03 #define LSC_SCODE_CMD_FAILED 0x04 #define LSC_SCODE_NOFABRIC 0x05 #define LSC_SCODE_FW_NOT_READY 0x07 #define LSC_SCODE_NOT_LOGGED_IN 0x09 #define LSC_SCODE_NOPCB 0x0A #define LSC_SCODE_ELS_REJECT 0x18 #define LSC_SCODE_CMD_PARAM_ERR 0x19 #define LSC_SCODE_PORTID_USED 0x1A #define LSC_SCODE_NPORT_USED 0x1B #define LSC_SCODE_NONPORT 0x1C #define LSC_SCODE_LOGGED_IN 0x1D #define LSC_SCODE_NOFLOGI_ACC 0x1F }; #define TSK_MGMT_IOCB_TYPE 0x14 struct tsk_mgmt_entry { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t handle_count; /* Handle count. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t nport_handle; /* N_PORT handle. */ uint16_t reserved_1; uint16_t delay; /* Activity delay in seconds. */ uint16_t timeout; /* Command timeout. */ struct scsi_lun lun; /* FCP LUN (BE). */ uint32_t control_flags; /* Control Flags. */ #define TCF_NOTMCMD_TO_TARGET BIT_31 #define TCF_LUN_RESET BIT_4 #define TCF_ABORT_TASK_SET BIT_3 #define TCF_CLEAR_TASK_SET BIT_2 #define TCF_TARGET_RESET BIT_1 #define TCF_CLEAR_ACA BIT_0 uint8_t reserved_2[20]; uint8_t port_id[3]; /* PortID of destination port. */ uint8_t vp_index; uint8_t reserved_3[12]; }; #define ABORT_IOCB_TYPE 0x33 struct abort_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t handle_count; /* Handle count. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t nport_handle; /* N_PORT handle. */ /* or Completion status. */ uint16_t options; /* Options. */ #define AOF_NO_ABTS BIT_0 /* Do not send any ABTS. */ uint32_t handle_to_abort; /* System handle to abort. */ uint8_t reserved_1[32]; uint8_t port_id[3]; /* PortID of destination port. */ uint8_t vp_index; uint8_t reserved_2[12]; }; /* * ISP I/O Register Set structure definitions. */ struct device_reg_24xx { uint32_t flash_addr; /* Flash/NVRAM BIOS address. */ #define FARX_DATA_FLAG BIT_31 #define FARX_ACCESS_FLASH_CONF 0x7FFD0000 #define FARX_ACCESS_FLASH_DATA 0x7FF00000 #define FARX_ACCESS_NVRAM_CONF 0x7FFF0000 #define FARX_ACCESS_NVRAM_DATA 0x7FFE0000 #define FA_NVRAM_FUNC0_ADDR 0x80 #define FA_NVRAM_FUNC1_ADDR 0x180 #define FA_NVRAM_VPD_SIZE 0x200 #define FA_NVRAM_VPD0_ADDR 0x00 #define FA_NVRAM_VPD1_ADDR 0x100 #define FA_BOOT_CODE_ADDR 0x00000 /* * RISC code begins at offset 512KB * within flash. Consisting of two * contiguous RISC code segments. */ #define FA_RISC_CODE_ADDR 0x20000 #define FA_RISC_CODE_SEGMENTS 2 #define FA_FW_AREA_ADDR 0x40000 #define FA_VPD_NVRAM_ADDR 0x48000 #define FA_FEATURE_ADDR 0x4C000 #define FA_FLASH_DESCR_ADDR 0x50000 #define FA_HW_EVENT0_ADDR 0x54000 #define FA_HW_EVENT1_ADDR 0x54200 #define FA_HW_EVENT_SIZE 0x200 #define FA_HW_EVENT_ENTRY_SIZE 4 /* * Flash Error Log Event Codes. */ #define HW_EVENT_RESET_ERR 0xF00B #define HW_EVENT_ISP_ERR 0xF020 #define HW_EVENT_PARITY_ERR 0xF022 #define HW_EVENT_NVRAM_CHKSUM_ERR 0xF023 #define HW_EVENT_FLASH_FW_ERR 0xF024 #define FA_BOOT_LOG_ADDR 0x58000 #define FA_FW_DUMP0_ADDR 0x60000 #define FA_FW_DUMP1_ADDR 0x70000 uint32_t flash_data; /* Flash/NVRAM BIOS data. */ uint32_t ctrl_status; /* Control/Status. */ #define CSRX_FLASH_ACCESS_ERROR BIT_18 /* Flash/NVRAM Access Error. */ #define CSRX_DMA_ACTIVE BIT_17 /* DMA Active status. */ #define CSRX_DMA_SHUTDOWN BIT_16 /* DMA Shutdown control status. */ #define CSRX_FUNCTION BIT_15 /* Function number. */ /* PCI-X Bus Mode. */ #define CSRX_PCIX_BUS_MODE_MASK (BIT_11|BIT_10|BIT_9|BIT_8) #define PBM_PCI_33MHZ (0 << 8) #define PBM_PCIX_M1_66MHZ (1 << 8) #define PBM_PCIX_M1_100MHZ (2 << 8) #define PBM_PCIX_M1_133MHZ (3 << 8) #define PBM_PCIX_M2_66MHZ (5 << 8) #define PBM_PCIX_M2_100MHZ (6 << 8) #define PBM_PCIX_M2_133MHZ (7 << 8) #define PBM_PCI_66MHZ (8 << 8) /* Max Write Burst byte count. */ #define CSRX_MAX_WRT_BURST_MASK (BIT_5|BIT_4) #define MWB_512_BYTES (0 << 4) #define MWB_1024_BYTES (1 << 4) #define MWB_2048_BYTES (2 << 4) #define MWB_4096_BYTES (3 << 4) #define CSRX_64BIT_SLOT BIT_2 /* PCI 64-Bit Bus Slot. */ #define CSRX_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable. */ #define CSRX_ISP_SOFT_RESET BIT_0 /* ISP soft reset. */ uint32_t ictrl; /* Interrupt control. */ #define ICRX_EN_RISC_INT BIT_3 /* Enable RISC interrupts on PCI. */ uint32_t istatus; /* Interrupt status. */ #define ISRX_RISC_INT BIT_3 /* RISC interrupt. */ uint32_t unused_1[2]; /* Gap. */ /* Request Queue. */ uint32_t req_q_in; /* In-Pointer. */ uint32_t req_q_out; /* Out-Pointer. */ /* Response Queue. */ uint32_t rsp_q_in; /* In-Pointer. */ uint32_t rsp_q_out; /* Out-Pointer. */ /* Priority Request Queue. */ uint32_t preq_q_in; /* In-Pointer. */ uint32_t preq_q_out; /* Out-Pointer. */ uint32_t unused_2[2]; /* Gap. */ /* ATIO Queue. */ uint32_t atio_q_in; /* In-Pointer. */ uint32_t atio_q_out; /* Out-Pointer. */ uint32_t host_status; #define HSRX_RISC_INT BIT_15 /* RISC to Host interrupt. */ #define HSRX_RISC_PAUSED BIT_8 /* RISC Paused. */ uint32_t hccr; /* Host command & control register. */ /* HCCR statuses. */ #define HCCRX_HOST_INT BIT_6 /* Host to RISC interrupt bit. */ #define HCCRX_RISC_RESET BIT_5 /* RISC Reset mode bit. */ #define HCCRX_RISC_PAUSE BIT_4 /* RISC Pause mode bit. */ /* HCCR commands. */ /* NOOP. */ #define HCCRX_NOOP 0x00000000 /* Set RISC Reset. */ #define HCCRX_SET_RISC_RESET 0x10000000 /* Clear RISC Reset. */ #define HCCRX_CLR_RISC_RESET 0x20000000 /* Set RISC Pause. */ #define HCCRX_SET_RISC_PAUSE 0x30000000 /* Releases RISC Pause. */ #define HCCRX_REL_RISC_PAUSE 0x40000000 /* Set HOST to RISC interrupt. */ #define HCCRX_SET_HOST_INT 0x50000000 /* Clear HOST to RISC interrupt. */ #define HCCRX_CLR_HOST_INT 0x60000000 /* Clear RISC to PCI interrupt. */ #define HCCRX_CLR_RISC_INT 0xA0000000 uint32_t gpiod; /* GPIO Data register. */ /* LED update mask. */ #define GPDX_LED_UPDATE_MASK (BIT_20|BIT_19|BIT_18) /* Data update mask. */ #define GPDX_DATA_UPDATE_MASK (BIT_17|BIT_16) /* Data update mask. */ #define GPDX_DATA_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) /* LED control mask. */ #define GPDX_LED_COLOR_MASK (BIT_4|BIT_3|BIT_2) /* LED bit values. Color names as * referenced in fw spec. */ #define GPDX_LED_YELLOW_ON BIT_2 #define GPDX_LED_GREEN_ON BIT_3 #define GPDX_LED_AMBER_ON BIT_4 /* Data in/out. */ #define GPDX_DATA_INOUT (BIT_1|BIT_0) uint32_t gpioe; /* GPIO Enable register. */ /* Enable update mask. */ #define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16) /* Enable update mask. */ #define GPEX_ENABLE_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) /* Enable. */ #define GPEX_ENABLE (BIT_1|BIT_0) uint32_t iobase_addr; /* I/O Bus Base Address register. */ uint32_t unused_3[10]; /* Gap. */ uint16_t mailbox0; uint16_t mailbox1; uint16_t mailbox2; uint16_t mailbox3; uint16_t mailbox4; uint16_t mailbox5; uint16_t mailbox6; uint16_t mailbox7; uint16_t mailbox8; uint16_t mailbox9; uint16_t mailbox10; uint16_t mailbox11; uint16_t mailbox12; uint16_t mailbox13; uint16_t mailbox14; uint16_t mailbox15; uint16_t mailbox16; uint16_t mailbox17; uint16_t mailbox18; uint16_t mailbox19; uint16_t mailbox20; uint16_t mailbox21; uint16_t mailbox22; uint16_t mailbox23; uint16_t mailbox24; uint16_t mailbox25; uint16_t mailbox26; uint16_t mailbox27; uint16_t mailbox28; uint16_t mailbox29; uint16_t mailbox30; uint16_t mailbox31; uint32_t iobase_window; uint32_t iobase_c4; uint32_t iobase_c8; uint32_t unused_4_1[6]; /* Gap. */ uint32_t iobase_q; uint32_t unused_5[2]; /* Gap. */ uint32_t iobase_select; uint32_t unused_6[2]; /* Gap. */ uint32_t iobase_sdata; }; /* Trace Control *************************************************************/ #define TC_AEN_DISABLE 0 #define TC_EFT_ENABLE 4 #define TC_EFT_DISABLE 5 #define TC_FCE_ENABLE 8 #define TC_FCE_OPTIONS 0 #define TC_FCE_DEFAULT_RX_SIZE 2112 #define TC_FCE_DEFAULT_TX_SIZE 2112 #define TC_FCE_DISABLE 9 #define TC_FCE_DISABLE_TRACE BIT_0 /* MID Support ***************************************************************/ #define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */ #define MAX_MULTI_ID_FABRIC 256 /* ... */ #define for_each_mapped_vp_idx(_ha, _idx) \ for (_idx = find_next_bit((_ha)->vp_idx_map, \ (_ha)->max_npiv_vports + 1, 1); \ _idx <= (_ha)->max_npiv_vports; \ _idx = find_next_bit((_ha)->vp_idx_map, \ (_ha)->max_npiv_vports + 1, _idx + 1)) \ struct mid_conf_entry_24xx { uint16_t reserved_1; /* * BIT 0 = Enable Hard Loop Id * BIT 1 = Acquire Loop ID in LIPA * BIT 2 = ID not Acquired * BIT 3 = Enable VP * BIT 4 = Enable Initiator Mode * BIT 5 = Disable Target Mode * BIT 6-7 = Reserved */ uint8_t options; uint8_t hard_address; uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; }; struct mid_init_cb_24xx { struct init_cb_24xx init_cb; uint16_t count; uint16_t options; struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC]; }; struct mid_db_entry_24xx { uint16_t status; #define MDBS_NON_PARTIC BIT_3 #define MDBS_ID_ACQUIRED BIT_1 #define MDBS_ENABLED BIT_0 uint8_t options; uint8_t hard_address; uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; uint8_t port_id[3]; uint8_t reserved_1; }; /* * Virtual Fabric ID type definition. */ typedef struct vf_id { uint16_t id : 12; uint16_t priority : 4; } vf_id_t; /* * Virtual Fabric HopCt type definition. */ typedef struct vf_hopct { uint16_t reserved : 8; uint16_t hopct : 8; } vf_hopct_t; /* * Virtual Port Control IOCB */ #define VP_CTRL_IOCB_TYPE 0x30 /* Vitual Port Control entry. */ struct vp_ctrl_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t vp_idx_failed; uint16_t comp_status; /* Completion status. */ #define CS_VCE_IOCB_ERROR 0x01 /* Error processing IOCB */ #define CS_VCE_ACQ_ID_ERROR 0x02 /* Error while acquireing ID. */ #define CS_VCE_BUSY 0x05 /* Firmware not ready to accept cmd. */ uint16_t command; #define VCE_COMMAND_ENABLE_VPS 0x00 /* Enable VPs. */ #define VCE_COMMAND_DISABLE_VPS 0x08 /* Disable VPs. */ #define VCE_COMMAND_DISABLE_VPS_REINIT 0x09 /* Disable VPs and reinit link. */ #define VCE_COMMAND_DISABLE_VPS_LOGO 0x0a /* Disable VPs and LOGO ports. */ #define VCE_COMMAND_DISABLE_VPS_LOGO_ALL 0x0b /* Disable VPs and LOGO ports. */ uint16_t vp_count; uint8_t vp_idx_map[16]; uint16_t flags; struct vf_id id; uint16_t reserved_4; struct vf_hopct hopct; uint8_t reserved_5[8]; }; /* * Modify Virtual Port Configuration IOCB */ #define VP_CONFIG_IOCB_TYPE 0x31 /* Vitual Port Config entry. */ struct vp_config_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t handle_count; uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t flags; #define CS_VF_BIND_VPORTS_TO_VF BIT_0 #define CS_VF_SET_QOS_OF_VPORTS BIT_1 #define CS_VF_SET_HOPS_OF_VPORTS BIT_2 uint16_t comp_status; /* Completion status. */ #define CS_VCT_STS_ERROR 0x01 /* Specified VPs were not disabled. */ #define CS_VCT_CNT_ERROR 0x02 /* Invalid VP count. */ #define CS_VCT_ERROR 0x03 /* Unknown error. */ #define CS_VCT_IDX_ERROR 0x02 /* Invalid VP index. */ #define CS_VCT_BUSY 0x05 /* Firmware not ready to accept cmd. */ uint8_t command; #define VCT_COMMAND_MOD_VPS 0x00 /* Modify VP configurations. */ #define VCT_COMMAND_MOD_ENABLE_VPS 0x01 /* Modify configuration & enable VPs. */ uint8_t vp_count; uint8_t vp_index1; uint8_t vp_index2; uint8_t options_idx1; uint8_t hard_address_idx1; uint16_t reserved_vp1; uint8_t port_name_idx1[WWN_SIZE]; uint8_t node_name_idx1[WWN_SIZE]; uint8_t options_idx2; uint8_t hard_address_idx2; uint16_t reserved_vp2; uint8_t port_name_idx2[WWN_SIZE]; uint8_t node_name_idx2[WWN_SIZE]; struct vf_id id; uint16_t reserved_4; struct vf_hopct hopct; uint8_t reserved_5; }; #define VP_RPT_ID_IOCB_TYPE 0x32 /* Report ID Acquisition entry. */ struct vp_rpt_id_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t vp_count; /* Format 0 -- | VP setup | VP acq |. */ /* Format 1 -- | VP count |. */ uint16_t vp_idx; /* Format 0 -- Reserved. */ /* Format 1 -- VP status and index. */ uint8_t port_id[3]; uint8_t format; uint8_t vp_idx_map[16]; uint8_t reserved_4[32]; }; #define VF_EVFP_IOCB_TYPE 0x26 /* Exchange Virtual Fabric Parameters entry. */ struct vf_evfp_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t comp_status; /* Completion status. */ uint16_t timeout; /* timeout */ uint16_t adim_tagging_mode; uint16_t vfport_id; uint32_t exch_addr; uint16_t nport_handle; /* N_PORT handle. */ uint16_t control_flags; uint32_t io_parameter_0; uint32_t io_parameter_1; uint32_t tx_address[2]; /* Data segment 0 address. */ uint32_t tx_len; /* Data segment 0 length. */ uint32_t rx_address[2]; /* Data segment 1 address. */ uint32_t rx_len; /* Data segment 1 length. */ }; /* END MID Support ***********************************************************/ /* Flash Description Table ***************************************************/ struct qla_fdt_layout { uint8_t sig[4]; uint16_t version; uint16_t len; uint16_t checksum; uint8_t unused1[2]; uint8_t model[16]; uint16_t man_id; uint16_t id; uint8_t flags; uint8_t erase_cmd; uint8_t alt_erase_cmd; uint8_t wrt_enable_cmd; uint8_t wrt_enable_bits; uint8_t wrt_sts_reg_cmd; uint8_t unprotect_sec_cmd; uint8_t read_man_id_cmd; uint32_t block_size; uint32_t alt_block_size; uint32_t flash_size; uint32_t wrt_enable_data; uint8_t read_id_addr_len; uint8_t wrt_disable_bits; uint8_t read_dev_id_len; uint8_t chip_erase_cmd; uint16_t read_timeout; uint8_t protect_sec_cmd; uint8_t unused2[65]; }; #endif