/* * linux/drivers/char/8250.h * * Driver for 8250/16550-type serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. * * Copyright (C) 2001 Russell King. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include <linux/serial_8250.h> struct old_serial_port { unsigned int uart; unsigned int baud_base; unsigned int port; unsigned int irq; unsigned int flags; unsigned char hub6; unsigned char io_type; unsigned char *iomem_base; unsigned short iomem_reg_shift; unsigned long irqflags; }; /* * This replaces serial_uart_config in include/linux/serial.h */ struct serial8250_config { const char *name; unsigned short fifo_size; unsigned short tx_loadsz; unsigned char fcr; unsigned int flags; }; #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ #define UART_CAP_EFR (1 << 9) /* UART has EFR */ #define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ #define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ #define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ #define PROBE_RSA (1 << 0) #define PROBE_ANY (~0) #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) #ifdef CONFIG_SERIAL_8250_SHARE_IRQ #define SERIAL8250_SHARE_IRQS 1 #else #define SERIAL8250_SHARE_IRQS 0 #endif #if defined(__alpha__) && !defined(CONFIG_PCI) /* * Digital did something really horribly wrong with the OUT1 and OUT2 * lines on at least some ALPHA's. The failure mode is that if either * is cleared, the machine locks up with endless interrupts. */ #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) #elif defined(CONFIG_SBC8560) /* * WindRiver did something similarly broken on their SBC8560 board. The * UART tristates its IRQ output while OUT2 is clear, but they pulled * the interrupt line _up_ instead of down, so if we register the IRQ * while the UART is in that state, we die in an IRQ storm. */ #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) #else #define ALPHA_KLUDGE_MCR 0 #endif