/* * linux/drivers/serial/pxa.c * * Based on drivers/serial/8250.c by Russell King. * * Author: Nicolas Pitre * Created: Feb 20, 2003 * Copyright: (C) 2003 Monta Vista Software, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * Note 1: This driver is made separate from the already too overloaded * 8250.c because it needs some kirks of its own and that'll make it * easier to add DMA support. * * Note 2: I'm too sick of device allocation policies for serial ports. * If someone else wants to request an "official" allocation of major/minor * for this driver please be my guest. And don't forget that new hardware * to come from Intel might have more than 3 or 4 of those UARTs. Let's * hope for a better port registration and dynamic device allocation scheme * with the serial core maintainer satisfaction to appear soon. */ #if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct uart_pxa_port { struct uart_port port; unsigned char ier; unsigned char lcr; unsigned char mcr; unsigned int lsr_break_flag; struct clk *clk; char *name; }; static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) { offset <<= 2; return readl(up->port.membase + offset); } static inline void serial_out(struct uart_pxa_port *up, int offset, int value) { offset <<= 2; writel(value, up->port.membase + offset); } static void serial_pxa_enable_ms(struct uart_port *port) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); } static void serial_pxa_stop_tx(struct uart_port *port) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; if (up->ier & UART_IER_THRI) { up->ier &= ~UART_IER_THRI; serial_out(up, UART_IER, up->ier); } } static void serial_pxa_stop_rx(struct uart_port *port) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; up->ier &= ~UART_IER_RLSI; up->port.read_status_mask &= ~UART_LSR_DR; serial_out(up, UART_IER, up->ier); } static inline void receive_chars(struct uart_pxa_port *up, int *status) { struct tty_struct *tty = up->port.info->port.tty; unsigned int ch, flag; int max_count = 256; do { ch = serial_in(up, UART_RX); flag = TTY_NORMAL; up->port.icount.rx++; if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | UART_LSR_FE | UART_LSR_OE))) { /* * For statistics only */ if (*status & UART_LSR_BI) { *status &= ~(UART_LSR_FE | UART_LSR_PE); up->port.icount.brk++; /* * We do the SysRQ and SAK checking * here because otherwise the break * may get masked by ignore_status_mask * or read_status_mask. */ if (uart_handle_break(&up->port)) goto ignore_char; } else if (*status & UART_LSR_PE) up->port.icount.parity++; else if (*status & UART_LSR_FE) up->port.icount.frame++; if (*status & UART_LSR_OE) up->port.icount.overrun++; /* * Mask off conditions which should be ignored. */ *status &= up->port.read_status_mask; #ifdef CONFIG_SERIAL_PXA_CONSOLE if (up->port.line == up->port.cons->index) { /* Recover the break flag from console xmit */ *status |= up->lsr_break_flag; up->lsr_break_flag = 0; } #endif if (*status & UART_LSR_BI) { flag = TTY_BREAK; } else if (*status & UART_LSR_PE) flag = TTY_PARITY; else if (*status & UART_LSR_FE) flag = TTY_FRAME; } if (uart_handle_sysrq_char(&up->port, ch)) goto ignore_char; uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); ignore_char: *status = serial_in(up, UART_LSR); } while ((*status & UART_LSR_DR) && (max_count-- > 0)); tty_flip_buffer_push(tty); } static void transmit_chars(struct uart_pxa_port *up) { struct circ_buf *xmit = &up->port.info->xmit; int count; if (up->port.x_char) { serial_out(up, UART_TX, up->port.x_char); up->port.icount.tx++; up->port.x_char = 0; return; } if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { serial_pxa_stop_tx(&up->port); return; } count = up->port.fifosize / 2; do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); up->port.icount.tx++; if (uart_circ_empty(xmit)) break; } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&up->port); if (uart_circ_empty(xmit)) serial_pxa_stop_tx(&up->port); } static void serial_pxa_start_tx(struct uart_port *port) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; if (!(up->ier & UART_IER_THRI)) { up->ier |= UART_IER_THRI; serial_out(up, UART_IER, up->ier); } } static inline void check_modem_status(struct uart_pxa_port *up) { int status; status = serial_in(up, UART_MSR); if ((status & UART_MSR_ANY_DELTA) == 0) return; if (status & UART_MSR_TERI) up->port.icount.rng++; if (status & UART_MSR_DDSR) up->port.icount.dsr++; if (status & UART_MSR_DDCD) uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); if (status & UART_MSR_DCTS) uart_handle_cts_change(&up->port, status & UART_MSR_CTS); wake_up_interruptible(&up->port.info->delta_msr_wait); } /* * This handles the interrupt from one port. */ static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id) { struct uart_pxa_port *up = dev_id; unsigned int iir, lsr; iir = serial_in(up, UART_IIR); if (iir & UART_IIR_NO_INT) return IRQ_NONE; lsr = serial_in(up, UART_LSR); if (lsr & UART_LSR_DR) receive_chars(up, &lsr); check_modem_status(up); if (lsr & UART_LSR_THRE) transmit_chars(up); return IRQ_HANDLED; } static unsigned int serial_pxa_tx_empty(struct uart_port *port) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned long flags; unsigned int ret; spin_lock_irqsave(&up->port.lock, flags); ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; spin_unlock_irqrestore(&up->port.lock, flags); return ret; } static unsigned int serial_pxa_get_mctrl(struct uart_port *port) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned char status; unsigned int ret; status = serial_in(up, UART_MSR); ret = 0; if (status & UART_MSR_DCD) ret |= TIOCM_CAR; if (status & UART_MSR_RI) ret |= TIOCM_RNG; if (status & UART_MSR_DSR) ret |= TIOCM_DSR; if (status & UART_MSR_CTS) ret |= TIOCM_CTS; return ret; } static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned char mcr = 0; if (mctrl & TIOCM_RTS) mcr |= UART_MCR_RTS; if (mctrl & TIOCM_DTR) mcr |= UART_MCR_DTR; if (mctrl & TIOCM_OUT1) mcr |= UART_MCR_OUT1; if (mctrl & TIOCM_OUT2) mcr |= UART_MCR_OUT2; if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; mcr |= up->mcr; serial_out(up, UART_MCR, mcr); } static void serial_pxa_break_ctl(struct uart_port *port, int break_state) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned long flags; spin_lock_irqsave(&up->port.lock, flags); if (break_state == -1) up->lcr |= UART_LCR_SBC; else up->lcr &= ~UART_LCR_SBC; serial_out(up, UART_LCR, up->lcr); spin_unlock_irqrestore(&up->port.lock, flags); } #if 0 static void serial_pxa_dma_init(struct pxa_uart *up) { up->rxdma = pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up); if (up->rxdma < 0) goto out; up->txdma = pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up); if (up->txdma < 0) goto err_txdma; up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL); if (!up->dmadesc) goto err_alloc; /* ... */ err_alloc: pxa_free_dma(up->txdma); err_rxdma: pxa_free_dma(up->rxdma); out: return; } #endif static int serial_pxa_startup(struct uart_port *port) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned long flags; int retval; if (port->line == 3) /* HWUART */ up->mcr |= UART_MCR_AFE; else up->mcr = 0; up->port.uartclk = clk_get_rate(up->clk); /* * Allocate the IRQ */ retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up); if (retval) return retval; /* * Clear the FIFO buffers and disable them. * (they will be reenabled in set_termios()) */ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); serial_out(up, UART_FCR, 0); /* * Clear the interrupt registers. */ (void) serial_in(up, UART_LSR); (void) serial_in(up, UART_RX); (void) serial_in(up, UART_IIR); (void) serial_in(up, UART_MSR); /* * Now, initialize the UART */ serial_out(up, UART_LCR, UART_LCR_WLEN8); spin_lock_irqsave(&up->port.lock, flags); up->port.mctrl |= TIOCM_OUT2; serial_pxa_set_mctrl(&up->port, up->port.mctrl); spin_unlock_irqrestore(&up->port.lock, flags); /* * Finally, enable interrupts. Note: Modem status interrupts * are set via set_termios(), which will be occurring imminently * anyway, so we don't enable them here. */ up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE; serial_out(up, UART_IER, up->ier); /* * And clear the interrupt registers again for luck. */ (void) serial_in(up, UART_LSR); (void) serial_in(up, UART_RX); (void) serial_in(up, UART_IIR); (void) serial_in(up, UART_MSR); return 0; } static void serial_pxa_shutdown(struct uart_port *port) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned long flags; free_irq(up->port.irq, up); /* * Disable interrupts from this port */ up->ier = 0; serial_out(up, UART_IER, 0); spin_lock_irqsave(&up->port.lock, flags); up->port.mctrl &= ~TIOCM_OUT2; serial_pxa_set_mctrl(&up->port, up->port.mctrl); spin_unlock_irqrestore(&up->port.lock, flags); /* * Disable break condition and FIFOs */ serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); serial_out(up, UART_FCR, 0); } static void serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned char cval, fcr = 0; unsigned long flags; unsigned int baud, quot; switch (termios->c_cflag & CSIZE) { case CS5: cval = UART_LCR_WLEN5; break; case CS6: cval = UART_LCR_WLEN6; break; case CS7: cval = UART_LCR_WLEN7; break; default: case CS8: cval = UART_LCR_WLEN8; break; } if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; if (termios->c_cflag & PARENB) cval |= UART_LCR_PARITY; if (!(termios->c_cflag & PARODD)) cval |= UART_LCR_EPAR; /* * Ask the core to calculate the divisor for us. */ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); quot = uart_get_divisor(port, baud); if ((up->port.uartclk / quot) < (2400 * 16)) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1; else if ((up->port.uartclk / quot) < (230400 * 16)) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8; else fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32; /* * Ok, we're now changing the port state. Do it with * interrupts disabled. */ spin_lock_irqsave(&up->port.lock, flags); /* * Ensure the port will be enabled. * This is required especially for serial console. */ up->ier |= IER_UUE; /* * Update the per-port timeout. */ uart_update_timeout(port, termios->c_cflag, baud); up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; if (termios->c_iflag & INPCK) up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; if (termios->c_iflag & (BRKINT | PARMRK)) up->port.read_status_mask |= UART_LSR_BI; /* * Characters to ignore */ up->port.ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; if (termios->c_iflag & IGNBRK) { up->port.ignore_status_mask |= UART_LSR_BI; /* * If we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) up->port.ignore_status_mask |= UART_LSR_OE; } /* * ignore all characters if CREAD is not set */ if ((termios->c_cflag & CREAD) == 0) up->port.ignore_status_mask |= UART_LSR_DR; /* * CTS flow control flag and modem status interrupts */ up->ier &= ~UART_IER_MSI; if (UART_ENABLE_MS(&up->port, termios->c_cflag)) up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); if (termios->c_cflag & CRTSCTS) up->mcr |= UART_MCR_AFE; else up->mcr &= ~UART_MCR_AFE; serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ serial_out(up, UART_LCR, cval); /* reset DLAB */ up->lcr = cval; /* Save LCR */ serial_pxa_set_mctrl(&up->port, up->port.mctrl); serial_out(up, UART_FCR, fcr); spin_unlock_irqrestore(&up->port.lock, flags); } static void serial_pxa_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; if (!state) clk_enable(up->clk); else clk_disable(up->clk); } static void serial_pxa_release_port(struct uart_port *port) { } static int serial_pxa_request_port(struct uart_port *port) { return 0; } static void serial_pxa_config_port(struct uart_port *port, int flags) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; up->port.type = PORT_PXA; } static int serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser) { /* we don't want the core code to modify any port params */ return -EINVAL; } static const char * serial_pxa_type(struct uart_port *port) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; return up->name; } static struct uart_pxa_port *serial_pxa_ports[4]; static struct uart_driver serial_pxa_reg; #ifdef CONFIG_SERIAL_PXA_CONSOLE #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) /* * Wait for transmitter & holding register to empty */ static inline void wait_for_xmitr(struct uart_pxa_port *up) { unsigned int status, tmout = 10000; /* Wait up to 10ms for the character(s) to be sent. */ do { status = serial_in(up, UART_LSR); if (status & UART_LSR_BI) up->lsr_break_flag = UART_LSR_BI; if (--tmout == 0) break; udelay(1); } while ((status & BOTH_EMPTY) != BOTH_EMPTY); /* Wait up to 1s for flow control if necessary */ if (up->port.flags & UPF_CONS_FLOW) { tmout = 1000000; while (--tmout && ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) udelay(1); } } static void serial_pxa_console_putchar(struct uart_port *port, int ch) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; wait_for_xmitr(up); serial_out(up, UART_TX, ch); } /* * Print a string to the serial port trying not to disturb * any possible real use of the port... * * The console_lock must be held when we get here. */ static void serial_pxa_console_write(struct console *co, const char *s, unsigned int count) { struct uart_pxa_port *up = serial_pxa_ports[co->index]; unsigned int ier; clk_enable(up->clk); /* * First save the IER then disable the interrupts */ ier = serial_in(up, UART_IER); serial_out(up, UART_IER, UART_IER_UUE); uart_console_write(&up->port, s, count, serial_pxa_console_putchar); /* * Finally, wait for transmitter to become empty * and restore the IER */ wait_for_xmitr(up); serial_out(up, UART_IER, ier); clk_disable(up->clk); } static int __init serial_pxa_console_setup(struct console *co, char *options) { struct uart_pxa_port *up; int baud = 9600; int bits = 8; int parity = 'n'; int flow = 'n'; if (co->index == -1 || co->index >= serial_pxa_reg.nr) co->index = 0; up = serial_pxa_ports[co->index]; if (!up) return -ENODEV; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); return uart_set_options(&up->port, co, baud, parity, bits, flow); } static struct console serial_pxa_console = { .name = "ttyS", .write = serial_pxa_console_write, .device = uart_console_device, .setup = serial_pxa_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &serial_pxa_reg, }; #define PXA_CONSOLE &serial_pxa_console #else #define PXA_CONSOLE NULL #endif struct uart_ops serial_pxa_pops = { .tx_empty = serial_pxa_tx_empty, .set_mctrl = serial_pxa_set_mctrl, .get_mctrl = serial_pxa_get_mctrl, .stop_tx = serial_pxa_stop_tx, .start_tx = serial_pxa_start_tx, .stop_rx = serial_pxa_stop_rx, .enable_ms = serial_pxa_enable_ms, .break_ctl = serial_pxa_break_ctl, .startup = serial_pxa_startup, .shutdown = serial_pxa_shutdown, .set_termios = serial_pxa_set_termios, .pm = serial_pxa_pm, .type = serial_pxa_type, .release_port = serial_pxa_release_port, .request_port = serial_pxa_request_port, .config_port = serial_pxa_config_port, .verify_port = serial_pxa_verify_port, }; static struct uart_driver serial_pxa_reg = { .owner = THIS_MODULE, .driver_name = "PXA serial", .dev_name = "ttyS", .major = TTY_MAJOR, .minor = 64, .nr = 4, .cons = PXA_CONSOLE, }; static int serial_pxa_suspend(struct platform_device *dev, pm_message_t state) { struct uart_pxa_port *sport = platform_get_drvdata(dev); if (sport) uart_suspend_port(&serial_pxa_reg, &sport->port); return 0; } static int serial_pxa_resume(struct platform_device *dev) { struct uart_pxa_port *sport = platform_get_drvdata(dev); if (sport) uart_resume_port(&serial_pxa_reg, &sport->port); return 0; } static int serial_pxa_probe(struct platform_device *dev) { struct uart_pxa_port *sport; struct resource *mmres, *irqres; int ret; mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); if (!mmres || !irqres) return -ENODEV; sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); if (!sport) return -ENOMEM; sport->clk = clk_get(&dev->dev, "UARTCLK"); if (IS_ERR(sport->clk)) { ret = PTR_ERR(sport->clk); goto err_free; } sport->port.type = PORT_PXA; sport->port.iotype = UPIO_MEM; sport->port.mapbase = mmres->start; sport->port.irq = irqres->start; sport->port.fifosize = 64; sport->port.ops = &serial_pxa_pops; sport->port.line = dev->id; sport->port.dev = &dev->dev; sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; sport->port.uartclk = clk_get_rate(sport->clk); /* * Is it worth keeping this? */ if (mmres->start == __PREG(FFUART)) sport->name = "FFUART"; else if (mmres->start == __PREG(BTUART)) sport->name = "BTUART"; else if (mmres->start == __PREG(STUART)) sport->name = "STUART"; else if (mmres->start == __PREG(HWUART)) sport->name = "HWUART"; else sport->name = "???"; sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); if (!sport->port.membase) { ret = -ENOMEM; goto err_clk; } serial_pxa_ports[dev->id] = sport; uart_add_one_port(&serial_pxa_reg, &sport->port); platform_set_drvdata(dev, sport); return 0; err_clk: clk_put(sport->clk); err_free: kfree(sport); return ret; } static int serial_pxa_remove(struct platform_device *dev) { struct uart_pxa_port *sport = platform_get_drvdata(dev); platform_set_drvdata(dev, NULL); uart_remove_one_port(&serial_pxa_reg, &sport->port); clk_put(sport->clk); kfree(sport); return 0; } static struct platform_driver serial_pxa_driver = { .probe = serial_pxa_probe, .remove = serial_pxa_remove, .suspend = serial_pxa_suspend, .resume = serial_pxa_resume, .driver = { .name = "pxa2xx-uart", .owner = THIS_MODULE, }, }; int __init serial_pxa_init(void) { int ret; ret = uart_register_driver(&serial_pxa_reg); if (ret != 0) return ret; ret = platform_driver_register(&serial_pxa_driver); if (ret != 0) uart_unregister_driver(&serial_pxa_reg); return ret; } void __exit serial_pxa_exit(void) { platform_driver_unregister(&serial_pxa_driver); uart_unregister_driver(&serial_pxa_reg); } module_init(serial_pxa_init); module_exit(serial_pxa_exit); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:pxa2xx-uart");