/* me4000.h Register descriptions and defines for the ME-4000 board family COMEDI - Linux Control and Measurement Device Interface Copyright (C) 1998-9 David A. Schleef This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _ME4000_H_ #define _ME4000_H_ /*============================================================================= Debug section ===========================================================================*/ #undef ME4000_CALL_DEBUG // Debug function entry and exit #undef ME4000_PORT_DEBUG // Debug port access #undef ME4000_ISR_DEBUG // Debug the interrupt service routine #undef ME4000_DEBUG // General purpose debug masseges #ifdef ME4000_CALL_DEBUG #undef CALL_PDEBUG #define CALL_PDEBUG(fmt, args...) printk(KERN_DEBUG"comedi%d: me4000: " fmt, dev->minor, ##args) #else # define CALL_PDEBUG(fmt, args...) // no debugging, do nothing #endif #ifdef ME4000_PORT_DEBUG #undef PORT_PDEBUG #define PORT_PDEBUG(fmt, args...) printk(KERN_DEBUG"comedi%d: me4000: " fmt, dev->minor, ##args) #else #define PORT_PDEBUG(fmt, args...) // no debugging, do nothing #endif #ifdef ME4000_ISR_DEBUG #undef ISR_PDEBUG #define ISR_PDEBUG(fmt, args...) printk(KERN_DEBUG"comedi%d: me4000: " fmt, dev->minor, ##args) #else #define ISR_PDEBUG(fmt, args...) // no debugging, do nothing #endif #ifdef ME4000_DEBUG #undef PDEBUG #define PDEBUG(fmt, args...) printk(KERN_DEBUG"comedi%d: me4000: " fmt, dev->minor, ##args) #else #define PDEBUG(fmt, args...) // no debugging, do nothing #endif /*============================================================================= PCI vendor and device IDs ===========================================================================*/ #define PCI_VENDOR_ID_MEILHAUS 0x1402 #define PCI_DEVICE_ID_MEILHAUS_ME4650 0x4650 // Low Cost version #define PCI_DEVICE_ID_MEILHAUS_ME4660 0x4660 // Standard version #define PCI_DEVICE_ID_MEILHAUS_ME4660I 0x4661 // Isolated version #define PCI_DEVICE_ID_MEILHAUS_ME4660S 0x4662 // Standard version with Sample and Hold #define PCI_DEVICE_ID_MEILHAUS_ME4660IS 0x4663 // Isolated version with Sample and Hold #define PCI_DEVICE_ID_MEILHAUS_ME4670 0x4670 // Standard version #define PCI_DEVICE_ID_MEILHAUS_ME4670I 0x4671 // Isolated version #define PCI_DEVICE_ID_MEILHAUS_ME4670S 0x4672 // Standard version with Sample and Hold #define PCI_DEVICE_ID_MEILHAUS_ME4670IS 0x4673 // Isolated version with Sample and Hold #define PCI_DEVICE_ID_MEILHAUS_ME4680 0x4680 // Standard version #define PCI_DEVICE_ID_MEILHAUS_ME4680I 0x4681 // Isolated version #define PCI_DEVICE_ID_MEILHAUS_ME4680S 0x4682 // Standard version with Sample and Hold #define PCI_DEVICE_ID_MEILHAUS_ME4680IS 0x4683 // Isolated version with Sample and Hold /*============================================================================= ME-4000 base register offsets ===========================================================================*/ #define ME4000_AO_00_CTRL_REG 0x00 // R/W #define ME4000_AO_00_STATUS_REG 0x04 // R/_ #define ME4000_AO_00_FIFO_REG 0x08 // _/W #define ME4000_AO_00_SINGLE_REG 0x0C // R/W #define ME4000_AO_00_TIMER_REG 0x10 // _/W #define ME4000_AO_01_CTRL_REG 0x18 // R/W #define ME4000_AO_01_STATUS_REG 0x1C // R/_ #define ME4000_AO_01_FIFO_REG 0x20 // _/W #define ME4000_AO_01_SINGLE_REG 0x24 // R/W #define ME4000_AO_01_TIMER_REG 0x28 // _/W #define ME4000_AO_02_CTRL_REG 0x30 // R/W #define ME4000_AO_02_STATUS_REG 0x34 // R/_ #define ME4000_AO_02_FIFO_REG 0x38 // _/W #define ME4000_AO_02_SINGLE_REG 0x3C // R/W #define ME4000_AO_02_TIMER_REG 0x40 // _/W #define ME4000_AO_03_CTRL_REG 0x48 // R/W #define ME4000_AO_03_STATUS_REG 0x4C // R/_ #define ME4000_AO_03_FIFO_REG 0x50 // _/W #define ME4000_AO_03_SINGLE_REG 0x54 // R/W #define ME4000_AO_03_TIMER_REG 0x58 // _/W #define ME4000_AI_CTRL_REG 0x74 // _/W #define ME4000_AI_STATUS_REG 0x74 // R/_ #define ME4000_AI_CHANNEL_LIST_REG 0x78 // _/W #define ME4000_AI_DATA_REG 0x7C // R/_ #define ME4000_AI_CHAN_TIMER_REG 0x80 // _/W #define ME4000_AI_CHAN_PRE_TIMER_REG 0x84 // _/W #define ME4000_AI_SCAN_TIMER_LOW_REG 0x88 // _/W #define ME4000_AI_SCAN_TIMER_HIGH_REG 0x8C // _/W #define ME4000_AI_SCAN_PRE_TIMER_LOW_REG 0x90 // _/W #define ME4000_AI_SCAN_PRE_TIMER_HIGH_REG 0x94 // _/W #define ME4000_AI_START_REG 0x98 // R/_ #define ME4000_IRQ_STATUS_REG 0x9C // R/_ #define ME4000_DIO_PORT_0_REG 0xA0 // R/W #define ME4000_DIO_PORT_1_REG 0xA4 // R/W #define ME4000_DIO_PORT_2_REG 0xA8 // R/W #define ME4000_DIO_PORT_3_REG 0xAC // R/W #define ME4000_DIO_DIR_REG 0xB0 // R/W #define ME4000_AO_LOADSETREG_XX 0xB4 // R/W #define ME4000_DIO_CTRL_REG 0xB8 // R/W #define ME4000_AO_DEMUX_ADJUST_REG 0xBC // -/W #define ME4000_AI_SAMPLE_COUNTER_REG 0xC0 // _/W /*============================================================================= Value to adjust Demux ===========================================================================*/ #define ME4000_AO_DEMUX_ADJUST_VALUE 0x4C /*============================================================================= Counter base register offsets ===========================================================================*/ #define ME4000_CNT_COUNTER_0_REG 0x00 #define ME4000_CNT_COUNTER_1_REG 0x01 #define ME4000_CNT_COUNTER_2_REG 0x02 #define ME4000_CNT_CTRL_REG 0x03 /*============================================================================= PLX base register offsets ===========================================================================*/ #define PLX_INTCSR 0x4C // Interrupt control and status register #define PLX_ICR 0x50 // Initialization control register /*============================================================================= Bits for the PLX_ICSR register ===========================================================================*/ #define PLX_INTCSR_LOCAL_INT1_EN 0x01 // If set, local interrupt 1 is enabled (r/w) #define PLX_INTCSR_LOCAL_INT1_POL 0x02 // If set, local interrupt 1 polarity is active high (r/w) #define PLX_INTCSR_LOCAL_INT1_STATE 0x04 // If set, local interrupt 1 is active (r/_) #define PLX_INTCSR_LOCAL_INT2_EN 0x08 // If set, local interrupt 2 is enabled (r/w) #define PLX_INTCSR_LOCAL_INT2_POL 0x10 // If set, local interrupt 2 polarity is active high (r/w) #define PLX_INTCSR_LOCAL_INT2_STATE 0x20 // If set, local interrupt 2 is active (r/_) #define PLX_INTCSR_PCI_INT_EN 0x40 // If set, PCI interrupt is enabled (r/w) #define PLX_INTCSR_SOFT_INT 0x80 // If set, a software interrupt is generated (r/w) /*============================================================================= Bits for the PLX_ICR register ===========================================================================*/ #define PLX_ICR_BIT_EEPROM_CLOCK_SET 0x01000000 #define PLX_ICR_BIT_EEPROM_CHIP_SELECT 0x02000000 #define PLX_ICR_BIT_EEPROM_WRITE 0x04000000 #define PLX_ICR_BIT_EEPROM_READ 0x08000000 #define PLX_ICR_BIT_EEPROM_VALID 0x10000000 #define PLX_ICR_MASK_EEPROM 0x1F000000 #define EEPROM_DELAY 1 /*============================================================================= Bits for the ME4000_AO_CTRL_REG register ===========================================================================*/ #define ME4000_AO_CTRL_BIT_MODE_0 0x001 #define ME4000_AO_CTRL_BIT_MODE_1 0x002 #define ME4000_AO_CTRL_MASK_MODE 0x003 #define ME4000_AO_CTRL_BIT_STOP 0x004 #define ME4000_AO_CTRL_BIT_ENABLE_FIFO 0x008 #define ME4000_AO_CTRL_BIT_ENABLE_EX_TRIG 0x010 #define ME4000_AO_CTRL_BIT_EX_TRIG_EDGE 0x020 #define ME4000_AO_CTRL_BIT_IMMEDIATE_STOP 0x080 #define ME4000_AO_CTRL_BIT_ENABLE_DO 0x100 #define ME4000_AO_CTRL_BIT_ENABLE_IRQ 0x200 #define ME4000_AO_CTRL_BIT_RESET_IRQ 0x400 /*============================================================================= Bits for the ME4000_AO_STATUS_REG register ===========================================================================*/ #define ME4000_AO_STATUS_BIT_FSM 0x01 #define ME4000_AO_STATUS_BIT_FF 0x02 #define ME4000_AO_STATUS_BIT_HF 0x04 #define ME4000_AO_STATUS_BIT_EF 0x08 /*============================================================================= Bits for the ME4000_AI_CTRL_REG register ===========================================================================*/ #define ME4000_AI_CTRL_BIT_MODE_0 0x00000001 #define ME4000_AI_CTRL_BIT_MODE_1 0x00000002 #define ME4000_AI_CTRL_BIT_MODE_2 0x00000004 #define ME4000_AI_CTRL_BIT_SAMPLE_HOLD 0x00000008 #define ME4000_AI_CTRL_BIT_IMMEDIATE_STOP 0x00000010 #define ME4000_AI_CTRL_BIT_STOP 0x00000020 #define ME4000_AI_CTRL_BIT_CHANNEL_FIFO 0x00000040 #define ME4000_AI_CTRL_BIT_DATA_FIFO 0x00000080 #define ME4000_AI_CTRL_BIT_FULLSCALE 0x00000100 #define ME4000_AI_CTRL_BIT_OFFSET 0x00000200 #define ME4000_AI_CTRL_BIT_EX_TRIG_ANALOG 0x00000400 #define ME4000_AI_CTRL_BIT_EX_TRIG 0x00000800 #define ME4000_AI_CTRL_BIT_EX_TRIG_FALLING 0x00001000 #define ME4000_AI_CTRL_BIT_EX_IRQ 0x00002000 #define ME4000_AI_CTRL_BIT_EX_IRQ_RESET 0x00004000 #define ME4000_AI_CTRL_BIT_LE_IRQ 0x00008000 #define ME4000_AI_CTRL_BIT_LE_IRQ_RESET 0x00010000 #define ME4000_AI_CTRL_BIT_HF_IRQ 0x00020000 #define ME4000_AI_CTRL_BIT_HF_IRQ_RESET 0x00040000 #define ME4000_AI_CTRL_BIT_SC_IRQ 0x00080000 #define ME4000_AI_CTRL_BIT_SC_IRQ_RESET 0x00100000 #define ME4000_AI_CTRL_BIT_SC_RELOAD 0x00200000 #define ME4000_AI_CTRL_BIT_EX_TRIG_BOTH 0x80000000 /*============================================================================= Bits for the ME4000_AI_STATUS_REG register ===========================================================================*/ #define ME4000_AI_STATUS_BIT_EF_CHANNEL 0x00400000 #define ME4000_AI_STATUS_BIT_HF_CHANNEL 0x00800000 #define ME4000_AI_STATUS_BIT_FF_CHANNEL 0x01000000 #define ME4000_AI_STATUS_BIT_EF_DATA 0x02000000 #define ME4000_AI_STATUS_BIT_HF_DATA 0x04000000 #define ME4000_AI_STATUS_BIT_FF_DATA 0x08000000 #define ME4000_AI_STATUS_BIT_LE 0x10000000 #define ME4000_AI_STATUS_BIT_FSM 0x20000000 /*============================================================================= Bits for the ME4000_IRQ_STATUS_REG register ===========================================================================*/ #define ME4000_IRQ_STATUS_BIT_EX 0x01 #define ME4000_IRQ_STATUS_BIT_LE 0x02 #define ME4000_IRQ_STATUS_BIT_AI_HF 0x04 #define ME4000_IRQ_STATUS_BIT_AO_0_HF 0x08 #define ME4000_IRQ_STATUS_BIT_AO_1_HF 0x10 #define ME4000_IRQ_STATUS_BIT_AO_2_HF 0x20 #define ME4000_IRQ_STATUS_BIT_AO_3_HF 0x40 #define ME4000_IRQ_STATUS_BIT_SC 0x80 /*============================================================================= Bits for the ME4000_DIO_CTRL_REG register ===========================================================================*/ #define ME4000_DIO_CTRL_BIT_MODE_0 0x0001 #define ME4000_DIO_CTRL_BIT_MODE_1 0x0002 #define ME4000_DIO_CTRL_BIT_MODE_2 0x0004 #define ME4000_DIO_CTRL_BIT_MODE_3 0x0008 #define ME4000_DIO_CTRL_BIT_MODE_4 0x0010 #define ME4000_DIO_CTRL_BIT_MODE_5 0x0020 #define ME4000_DIO_CTRL_BIT_MODE_6 0x0040 #define ME4000_DIO_CTRL_BIT_MODE_7 0x0080 #define ME4000_DIO_CTRL_BIT_FUNCTION_0 0x0100 #define ME4000_DIO_CTRL_BIT_FUNCTION_1 0x0200 #define ME4000_DIO_CTRL_BIT_FIFO_HIGH_0 0x0400 #define ME4000_DIO_CTRL_BIT_FIFO_HIGH_1 0x0800 #define ME4000_DIO_CTRL_BIT_FIFO_HIGH_2 0x1000 #define ME4000_DIO_CTRL_BIT_FIFO_HIGH_3 0x2000 /*============================================================================= Information about the hardware capabilities ===========================================================================*/ typedef struct me4000_ao_info { int count; int fifo_count; } me4000_ao_info_t; typedef struct me4000_ai_info { int count; int sh_count; int diff_count; int ex_trig_analog; } me4000_ai_info_t; typedef struct me4000_dio_info { int count; } me4000_dio_info_t; typedef struct me4000_cnt_info { int count; } me4000_cnt_info_t; typedef struct me4000_board { const char *name; unsigned short device_id; me4000_ao_info_t ao; me4000_ai_info_t ai; me4000_dio_info_t dio; me4000_cnt_info_t cnt; } me4000_board_t; #define thisboard ((const me4000_board_t *)dev->board_ptr) /*============================================================================= Global board and subdevice information structures ===========================================================================*/ typedef struct me4000_ao_context { int irq; unsigned long mirror; // Store the last written value unsigned long ctrl_reg; unsigned long status_reg; unsigned long fifo_reg; unsigned long single_reg; unsigned long timer_reg; unsigned long irq_status_reg; unsigned long preload_reg; } me4000_ao_context_t; typedef struct me4000_ai_context { int irq; unsigned long ctrl_reg; unsigned long status_reg; unsigned long channel_list_reg; unsigned long data_reg; unsigned long chan_timer_reg; unsigned long chan_pre_timer_reg; unsigned long scan_timer_low_reg; unsigned long scan_timer_high_reg; unsigned long scan_pre_timer_low_reg; unsigned long scan_pre_timer_high_reg; unsigned long start_reg; unsigned long irq_status_reg; unsigned long sample_counter_reg; } me4000_ai_context_t; typedef struct me4000_dio_context { unsigned long dir_reg; unsigned long ctrl_reg; unsigned long port_0_reg; unsigned long port_1_reg; unsigned long port_2_reg; unsigned long port_3_reg; } me4000_dio_context_t; typedef struct me4000_cnt_context { unsigned long ctrl_reg; unsigned long counter_0_reg; unsigned long counter_1_reg; unsigned long counter_2_reg; } me4000_cnt_context_t; typedef struct me4000_info { unsigned long plx_regbase; // PLX configuration space base address unsigned long me4000_regbase; // Base address of the ME4000 unsigned long timer_regbase; // Base address of the timer circuit unsigned long program_regbase; // Base address to set the program pin for the xilinx unsigned long plx_regbase_size; // PLX register set space unsigned long me4000_regbase_size; // ME4000 register set space unsigned long timer_regbase_size; // Timer circuit register set space unsigned long program_regbase_size; // Size of program base address of the ME4000 unsigned int serial_no; // Serial number of the board unsigned char hw_revision; // Hardware revision of the board unsigned short vendor_id; // Meilhaus vendor id unsigned short device_id; // Device id struct pci_dev *pci_dev_p; // General PCI information unsigned int irq; // IRQ assigned from the PCI BIOS struct me4000_ai_context ai_context; // Analog input specific context struct me4000_ao_context ao_context[4]; // Vector with analog output specific context struct me4000_dio_context dio_context; // Digital I/O specific context struct me4000_cnt_context cnt_context; // Counter specific context } me4000_info_t; #define info ((me4000_info_t *)dev->private) /*----------------------------------------------------------------------------- Defines for analog input ----------------------------------------------------------------------------*/ /* General stuff */ #define ME4000_AI_FIFO_COUNT 2048 #define ME4000_AI_MIN_TICKS 66 #define ME4000_AI_MIN_SAMPLE_TIME 2000 // Minimum sample time [ns] #define ME4000_AI_BASE_FREQUENCY (unsigned int) 33E6 /* Channel list defines and masks */ #define ME4000_AI_CHANNEL_LIST_COUNT 1024 #define ME4000_AI_LIST_INPUT_SINGLE_ENDED 0x000 #define ME4000_AI_LIST_INPUT_DIFFERENTIAL 0x020 #define ME4000_AI_LIST_RANGE_BIPOLAR_10 0x000 #define ME4000_AI_LIST_RANGE_BIPOLAR_2_5 0x040 #define ME4000_AI_LIST_RANGE_UNIPOLAR_10 0x080 #define ME4000_AI_LIST_RANGE_UNIPOLAR_2_5 0x0C0 #define ME4000_AI_LIST_LAST_ENTRY 0x100 /*----------------------------------------------------------------------------- Defines for counters ----------------------------------------------------------------------------*/ #define ME4000_CNT_COUNTER_0 0x00 #define ME4000_CNT_COUNTER_1 0x40 #define ME4000_CNT_COUNTER_2 0x80 #define ME4000_CNT_MODE_0 0x00 // Change state if zero crossing #define ME4000_CNT_MODE_1 0x02 // Retriggerable One-Shot #define ME4000_CNT_MODE_2 0x04 // Asymmetrical divider #define ME4000_CNT_MODE_3 0x06 // Symmetrical divider #define ME4000_CNT_MODE_4 0x08 // Counter start by software trigger #define ME4000_CNT_MODE_5 0x0A // Counter start by hardware trigger #endif