#ifndef __WINBOND_LOCALPARA_H #define __WINBOND_LOCALPARA_H //============================================================= // LocalPara.h - //============================================================= #include "mac_structures.h" //Define the local ability #define LOCAL_DEFAULT_BEACON_PERIOD 100 //ms #define LOCAL_DEFAULT_ATIM_WINDOW 0 #define LOCAL_DEFAULT_ERP_CAPABILITY 0x0431 //0x0001: ESS //0x0010: Privacy //0x0020: short preamble //0x0400: short slot time #define LOCAL_DEFAULT_LISTEN_INTERVAL 5 //#define LOCAL_DEFAULT_24_CHANNEL_NUM 11 // channel 1..11 #define LOCAL_DEFAULT_24_CHANNEL_NUM 13 // channel 1..13 #define LOCAL_DEFAULT_5_CHANNEL_NUM 8 // channel 36..64 #define LOCAL_USA_24_CHANNEL_NUM 11 #define LOCAL_USA_5_CHANNEL_NUM 12 #define LOCAL_EUROPE_24_CHANNEL_NUM 13 #define LOCAL_EUROPE_5_CHANNEL_NUM 19 #define LOCAL_JAPAN_24_CHANNEL_NUM 14 #define LOCAL_JAPAN_5_CHANNEL_NUM 11 #define LOCAL_UNKNOWN_24_CHANNEL_NUM 14 #define LOCAL_UNKNOWN_5_CHANNEL_NUM 34 //not include 165 #define psLOCAL (&(adapter->sLocalPara)) #define MODE_802_11_BG 0 #define MODE_802_11_A 1 #define MODE_802_11_ABG 2 #define MODE_802_11_BG_IBSS 3 #define MODE_802_11_B 4 #define MODE_AUTO 255 #define BAND_TYPE_DSSS 0 #define BAND_TYPE_OFDM_24 1 #define BAND_TYPE_OFDM_5 2 //refer Bitmap2RateValue table #define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66 //the bitmap value of all the H/W supported rates //1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 #define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240 //the bitmap value of all the H/W supported rates //except to non-OFDM rates //6, 9, 12, 18, 24, 36, 48, 54 #define LOCAL_11B_SUPPORTED_RATE_BITMAP 0x826 #define LOCAL_11B_BASIC_RATE_BITMAP 0x826 #define LOCAL_11B_OPERATION_RATE_BITMAP 0x826 #define LOCAL_11G_BASIC_RATE_BITMAP 0x826 //1, 2, 5.5, 11 #define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 //6, 9, 12, 18, 24, 36, 48, 54 #define LOCAL_11A_BASIC_RATE_BITMAP 0x01001040 //6, 12, 24 #define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 //9, 18, 36, 48, 54 #define PWR_ACTIVE 0 #define PWR_SAVE 1 #define PWR_TX_IDLE_CYCLE 6 //bPreambleMode and bSlotTimeMode #define AUTO_MODE 0 #define LONG_MODE 1 //Region definition #define REGION_AUTO 0xff #define REGION_UNKNOWN 0 #define REGION_EUROPE 1 //ETSI #define REGION_JAPAN 2 //MKK #define REGION_USA 3 //FCC #define REGION_FRANCE 4 //FRANCE #define REGION_SPAIN 5 //SPAIN #define REGION_ISRAEL 6 //ISRAEL //#define REGION_CANADA 7 //IC #define MAX_BSS_DESCRIPT_ELEMENT 32 #define MAX_PMKID_CandidateList 16 //High byte : Event number, low byte : reason //Event definition //-- SME/MLME event #define EVENT_RCV_DEAUTH 0x0100 #define EVENT_JOIN_FAIL 0x0200 #define EVENT_AUTH_FAIL 0x0300 #define EVENT_ASSOC_FAIL 0x0400 #define EVENT_LOST_SIGNAL 0x0500 #define EVENT_BSS_DESCRIPT_LACK 0x0600 #define EVENT_COUNTERMEASURE 0x0700 #define EVENT_JOIN_FILTER 0x0800 //-- TX/RX event #define EVENT_RX_BUFF_UNAVAILABLE 0x4100 #define EVENT_CONNECT 0x8100 #define EVENT_DISCONNECT 0x8200 #define EVENT_SCAN_REQ 0x8300 //Reason of Event #define EVENT_REASON_FILTER_BASIC_RATE 0x0001 #define EVENT_REASON_FILTER_PRIVACY 0x0002 #define EVENT_REASON_FILTER_AUTH_MODE 0x0003 #define EVENT_REASON_TIMEOUT 0x00ff // 20061108 WPS IE buffer #define MAX_IE_APPEND_SIZE 256 + 4 // Due to [E id][Length][OUI][Data] may 257 bytes typedef struct _EVENTLOG { u16 Count; //Total count from start u16 index; //Buffer index, 0 ~ 63 u32 EventValue[64]; //BYTE 3~2 : count, BYTE 1 : Event, BYTE 0 : reason } Event_Log, *pEvent_Log; typedef struct _ChanInfo { u8 band; u8 ChanNo; } ChanInfo, *pChanInfo; typedef struct _CHAN_LIST { u16 Count; ChanInfo Channel[50]; // 100B } CHAN_LIST, *psCHAN_LIST; typedef struct _RadioOff { u8 boHwRadioOff; u8 boSwRadioOff; } RadioOff, *psRadioOff; //=========================================================================== typedef struct LOCAL_PARA { u8 PermanentAddress[ MAC_ADDR_LENGTH + 2 ]; // read from EPROM, manufacture set for each NetCard u8 ThisMacAddress[ MAC_ADDR_LENGTH + 2 ]; // the driver will use actually. u32 MTUsize; // Ind to Uplayer, Max transmission unit size u8 region_INF; //region setting from INF u8 region; //real region setting of the device u8 Reserved_1[2]; //// power-save variables u8 iPowerSaveMode; // 0 indicates it is on, 1 indicates it is off u8 ATIMmode; u8 ExcludeUnencrypted; u16 CheckCountForPS; //Unit ime count for the decision to enter PS mode u8 boHasTxActivity; //tx activity has occurred u8 boMacPsValid; //Power save mode obtained from H/W is valid or not //// Rate u8 TxRateMode; // Initial, input from Registry, may be updated by GUI //Tx Rate Mode: auto(DTO on), max, 1M, 2M, .. u8 CurrentTxRate; // The current Tx rate u8 CurrentTxRateForMng; // The current Tx rate for management frames // It will be decided before connection succeeds. u8 CurrentTxFallbackRate; //for Rate handler u8 BRateSet[32]; //basic rate set u8 SRateSet[32]; //support rate set u8 NumOfBRate; u8 NumOfSRate; u8 NumOfDsssRateInSRate; //number of DSSS rates in supported rate set u8 reserved1; u32 dwBasicRateBitmap; //bit map of basic rates u32 dwSupportRateBitmap; //bit map of all support rates including //basic and operational rates ////For SME/MLME handler u16 wOldSTAindex; // valid when boHandover=TRUE, store old connected STA index u16 wConnectedSTAindex; // Index of peerly connected AP or IBSS in // the descriptionset. u16 Association_ID; // The Association ID in the (Re)Association // Response frame. u16 ListenInterval; // The listen interval when SME invoking MLME_ // (Re)Associate_Request(). RadioOff RadioOffStatus; u8 Reserved0[2]; u8 boMsRadioOff; // Ndis demands to be true when set Disassoc. OID and be false when set SSID OID. u8 boAntennaDiversity; //TRUE/ON or FALSE/OFF u8 bAntennaNo; //which antenna u8 bConnectFlag; //the connect status flag for roaming task u8 RoamStatus; u8 reserved7[3]; ChanInfo CurrentChan; //Current channel no. and channel band. It may be changed by scanning. u8 boHandover; // Roaming, Hnadover to other AP. u8 boCCAbusy; u16 CWMax; // It may not be the real value that H/W used u8 CWMin; // 255: set according to 802.11 spec. u8 reserved2; //11G: u8 bMacOperationMode; // operation in 802.11b or 802.11g u8 bSlotTimeMode; //AUTO, s32 u8 bPreambleMode; //AUTO, s32 u8 boNonERPpresent; u8 boProtectMechanism; // H/W will take the necessary action based on this variable u8 boShortPreamble; // H/W will take the necessary action based on this variable u8 boShortSlotTime; // H/W will take the necessary action based on this variable u8 reserved_3; u32 RSN_IE_Bitmap; //added by WS u32 RSN_OUI_Type; //added by WS //For the BSSID u8 HwBssid[MAC_ADDR_LENGTH + 2]; u32 HwBssidValid; //For scan list u8 BssListCount; //Total count of valid descriptor indexes u8 boReceiveUncorrectInfo; //important settings in beacon/probe resp. have been changed u8 NoOfJoinerInIbss; u8 reserved_4; u8 BssListIndex[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ]; //Store the valid descriptor indexes obtained from scannings u8 JoinerInIbss[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ]; //save the BssDescriptor index in this //IBSS. The index 0 is local descriptor //(psLOCAL->wConnectedSTAindex). //If CONNECTED : NoOfJoinerInIbss >=2 // else : NoOfJoinerInIbss <=1 //// General Statistics, count at Rx_handler or Tx_callback interrupt handler u64 GS_XMIT_OK; // Good Frames Transmitted u64 GS_RCV_OK; // Good Frames Received u32 GS_RCV_ERROR; // Frames received with crc error u32 GS_XMIT_ERROR; // Bad Frames Transmitted u32 GS_RCV_NO_BUFFER; // Receive Buffer underrun u32 GS_XMIT_ONE_COLLISION; // one collision u32 GS_XMIT_MORE_COLLISIONS;// more collisions //================================================================ // Statistics (no matter whether it had done successfully) -wkchen //================================================================ u32 _NumRxMSDU; u32 _NumTxMSDU; u32 _dot11WEPExcludedCount; u32 _dot11WEPUndecryptableCount; u32 _dot11FrameDuplicateCount; ChanInfo IbssChanSetting; // 2B. Start IBSS Channel setting by registry or WWU. u8 reserved_5[2]; //It may not be used after considering RF type, //region and modulation type. CHAN_LIST sSupportChanList; // 86B. It will be obtained according to RF type and region u8 reserved_6[2]; //two variables are for wep key error detection added by ws 02/02/04 u32 bWepKeyError; u32 bToSelfPacketReceived; u32 WepKeyDetectTimerCount; Event_Log EventLog; u16 SignalLostTh; u16 SignalRoamTh; // 20061108 WPS IE Append u8 IE_Append_data[MAX_IE_APPEND_SIZE]; u16 IE_Append_size; u16 reserved_7; } WB_LOCALDESCRIPT, *PWB_LOCALDESCRIPT; #endif