/*
 * Copyright 2008 Pavel Machek <pavel@suse.cz>
 *
 * Distribute under GPLv2.
 */
#include <net/mac80211.h>
#include <linux/usb.h>

#include "core.h"
#include "mds_f.h"
#include "mlmetxrx_f.h"
#include "mto.h"
#include "wbhal_f.h"
#include "wblinux_f.h"

MODULE_AUTHOR("Original by: Jeff Lee<YY_Lee@issc.com.tw> Adapted to 2.6.x by Costantino Leandro (Rxart Desktop) <le_costantino@pixartargentina.com.ar>");
MODULE_DESCRIPTION("IS89C35 802.11bg WLAN USB Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.1");

static struct usb_device_id wb35_table[] __devinitdata = {
	{USB_DEVICE(0x0416, 0x0035)},
	{USB_DEVICE(0x18E8, 0x6201)},
	{USB_DEVICE(0x18E8, 0x6206)},
	{USB_DEVICE(0x18E8, 0x6217)},
	{USB_DEVICE(0x18E8, 0x6230)},
	{USB_DEVICE(0x18E8, 0x6233)},
	{USB_DEVICE(0x1131, 0x2035)},
	{ 0, }
};

MODULE_DEVICE_TABLE(usb, wb35_table);

static struct ieee80211_rate wbsoft_rates[] = {
	{ .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
};

static struct ieee80211_channel wbsoft_channels[] = {
	{ .center_freq = 2412},
};

static struct ieee80211_supported_band wbsoft_band_2GHz = {
	.channels	= wbsoft_channels,
	.n_channels	= ARRAY_SIZE(wbsoft_channels),
	.bitrates	= wbsoft_rates,
	.n_bitrates	= ARRAY_SIZE(wbsoft_rates),
};

static int wbsoft_add_interface(struct ieee80211_hw *dev,
				 struct ieee80211_if_init_conf *conf)
{
	printk("wbsoft_add interface called\n");
	return 0;
}

static void wbsoft_remove_interface(struct ieee80211_hw *dev,
				     struct ieee80211_if_init_conf *conf)
{
	printk("wbsoft_remove interface called\n");
}

static void wbsoft_stop(struct ieee80211_hw *hw)
{
	printk(KERN_INFO "%s called\n", __func__);
}

static int wbsoft_get_stats(struct ieee80211_hw *hw,
			    struct ieee80211_low_level_stats *stats)
{
	printk(KERN_INFO "%s called\n", __func__);
	return 0;
}

static int wbsoft_get_tx_stats(struct ieee80211_hw *hw,
			       struct ieee80211_tx_queue_stats *stats)
{
	printk(KERN_INFO "%s called\n", __func__);
	return 0;
}

static void wbsoft_configure_filter(struct ieee80211_hw *dev,
				     unsigned int changed_flags,
				     unsigned int *total_flags,
				     int mc_count, struct dev_mc_list *mclist)
{
	unsigned int new_flags;

	new_flags = 0;

	if (*total_flags & FIF_PROMISC_IN_BSS)
		new_flags |= FIF_PROMISC_IN_BSS;
	else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32))
		new_flags |= FIF_ALLMULTI;

	dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;

	*total_flags = new_flags;
}

static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
	struct wbsoft_priv *priv = dev->priv;

	MLMESendFrame(priv, skb->data, skb->len, FRAME_TYPE_802_11_MANAGEMENT);

	return NETDEV_TX_OK;
}


static int wbsoft_start(struct ieee80211_hw *dev)
{
	struct wbsoft_priv *priv = dev->priv;

	priv->enabled = true;

	return 0;
}

static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
{
	struct wbsoft_priv *priv = dev->priv;
	struct ieee80211_conf *conf = &dev->conf;
	ChanInfo ch;

	printk("wbsoft_config called\n");

	ch.band = 1;
	ch.ChanNo = 1;	/* Should use channel_num, or something, as that is already pre-translated */


	hal_set_current_channel(&priv->sHwData, ch);
	hal_set_beacon_period(&priv->sHwData, conf->beacon_int);
//	hal_set_cap_info(&priv->sHwData, ?? );
// hal_set_ssid(struct hw_data * pHwData,  u8 * pssid,  u8 ssid_len); ??
	hal_set_accept_broadcast(&priv->sHwData, 1);
	hal_set_accept_promiscuous(&priv->sHwData,  1);
	hal_set_accept_multicast(&priv->sHwData,  1);
	hal_set_accept_beacon(&priv->sHwData,  1);
	hal_set_radio_mode(&priv->sHwData,  0);
	//hal_set_antenna_number(  struct hw_data * pHwData, u8 number )
	//hal_set_rf_power(struct hw_data * pHwData, u8 PowerIndex)


//	hal_start_bss(&priv->sHwData, WLAN_BSSTYPE_INFRASTRUCTURE);	??

//void hal_set_rates(struct hw_data * pHwData, u8 * pbss_rates,
//		   u8 length, unsigned char basic_rate_set)

	return 0;
}

static int wbsoft_config_interface(struct ieee80211_hw *dev,
				    struct ieee80211_vif *vif,
				    struct ieee80211_if_conf *conf)
{
	printk("wbsoft_config_interface called\n");
	return 0;
}

static u64 wbsoft_get_tsf(struct ieee80211_hw *dev)
{
	printk("wbsoft_get_tsf called\n");
	return 0;
}

static const struct ieee80211_ops wbsoft_ops = {
	.tx			= wbsoft_tx,
	.start			= wbsoft_start,		/* Start can be pretty much empty as we do wb35_hw_init() during probe? */
	.stop			= wbsoft_stop,
	.add_interface		= wbsoft_add_interface,
	.remove_interface	= wbsoft_remove_interface,
	.config			= wbsoft_config,
	.config_interface	= wbsoft_config_interface,
	.configure_filter	= wbsoft_configure_filter,
	.get_stats		= wbsoft_get_stats,
	.get_tx_stats		= wbsoft_get_tx_stats,
	.get_tsf		= wbsoft_get_tsf,
// conf_tx: hal_set_cwmin()/hal_set_cwmax;
};

static void hal_halt(struct hw_data *pHwData, void *ppa_data)
{
	switch( pHwData->InitialResource )
	{
		case 4:
		case 3: del_timer_sync(&pHwData->LEDTimer);
			msleep(100); // Wait for Timer DPC exit 940623.2
			Wb35Rx_destroy( pHwData ); // Release the Rx
		case 2: Wb35Tx_destroy( pHwData ); // Release the Tx
		case 1: Wb35Reg_destroy( pHwData ); // Release the Wb35 Regisster resources
	}
}

static void hal_led_control(unsigned long data)
{
	struct wbsoft_priv *adapter = (struct wbsoft_priv *) data;
	struct hw_data * pHwData = &adapter->sHwData;
	struct wb35_reg *reg = &pHwData->reg;
	u32	LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
	u8	LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 };
	u8	LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 };
	u32	TimeInterval = 500, ltmp, ltmp2;
        ltmp=0;

	if( pHwData->SurpriseRemove ) return;

	if( pHwData->LED_control ) {
		ltmp2 = pHwData->LED_control & 0xff;
		if( ltmp2 == 5 ) // 5 is WPS mode
		{
			TimeInterval = 100;
			ltmp2 = (pHwData->LED_control>>8) & 0xff;
			switch( ltmp2 )
			{
				case 1: // [0.2 On][0.1 Off]...
					pHwData->LED_Blinking %= 3;
					ltmp = 0x1010; // Led 1 & 0 Green and Red
					if( pHwData->LED_Blinking == 2 ) // Turn off
						ltmp = 0;
					break;
				case 2: // [0.1 On][0.1 Off]...
					pHwData->LED_Blinking %= 2;
					ltmp = 0x0010; // Led 0 red color
					if( pHwData->LED_Blinking ) // Turn off
						ltmp = 0;
					break;
				case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
					pHwData->LED_Blinking %= 15;
					ltmp = 0x0010; // Led 0 red color
					if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec
						ltmp = 0;
					break;
				case 4: // [300 On][ off ]
					ltmp = 0x1000; // Led 1 Green color
					if( pHwData->LED_Blinking >= 3000 )
						ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
					break;
			}
			pHwData->LED_Blinking++;

			reg->U1BC_LEDConfigure = ltmp;
			if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB.
			{
				reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register
				reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8;
			}
			Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
		}
	}
	else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off
	{
		if( reg->U1BC_LEDConfigure & 0x1010 )
		{
			reg->U1BC_LEDConfigure &= ~0x1010;
			Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
		}
	}
	else
	{
		switch( LEDSet )
		{
			case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
				if( !pHwData->LED_LinkOn ) // Blink only if not Link On
				{
					// Blinking if scanning is on progress
					if( pHwData->LED_Scanning )
					{
						if( pHwData->LED_Blinking == 0 )
						{
							reg->U1BC_LEDConfigure |= 0x10;
							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
							pHwData->LED_Blinking = 1;
							TimeInterval = 300;
						}
						else
						{
							reg->U1BC_LEDConfigure &= ~0x10;
							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
							pHwData->LED_Blinking = 0;
							TimeInterval = 300;
						}
					}
					else
					{
						//Turn Off LED_0
						if( reg->U1BC_LEDConfigure & 0x10 )
						{
							reg->U1BC_LEDConfigure &= ~0x10;
							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
						}
					}
				}
				else
				{
					// Turn On LED_0
					if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
					{
						reg->U1BC_LEDConfigure |= 0x10;
						Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
					}
				}
				break;

			case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
				if( !pHwData->LED_LinkOn ) // Blink only if not Link On
				{
					// Blinking if scanning is on progress
					if( pHwData->LED_Scanning )
					{
						if( pHwData->LED_Blinking == 0 )
						{
							reg->U1BC_LEDConfigure &= ~0xf;
							reg->U1BC_LEDConfigure |= 0x10;
							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
							pHwData->LED_Blinking = 1;
							TimeInterval = 300;
						}
						else
						{
							reg->U1BC_LEDConfigure &= ~0x1f;
							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
							pHwData->LED_Blinking = 0;
							TimeInterval = 300;
						}
					}
					else
					{
						// 20060901 Gray blinking if in disconnect state and not scanning
						ltmp = reg->U1BC_LEDConfigure;
						reg->U1BC_LEDConfigure &= ~0x1f;
						if( LEDgray2[(pHwData->LED_Blinking%30)] )
						{
							reg->U1BC_LEDConfigure |= 0x10;
							reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ];
						}
						pHwData->LED_Blinking++;
						if( reg->U1BC_LEDConfigure != ltmp )
							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
						TimeInterval = 100;
					}
				}
				else
				{
					// Turn On LED_0
					if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
					{
						reg->U1BC_LEDConfigure |= 0x10;
						Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
					}
				}
				break;

			case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
				if( !pHwData->LED_LinkOn ) // Blink only if not Link On
				{
					// Blinking if scanning is on progress
					if( pHwData->LED_Scanning )
					{
						if( pHwData->LED_Blinking == 0 )
						{
							reg->U1BC_LEDConfigure |= 0x1000;
							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
							pHwData->LED_Blinking = 1;
							TimeInterval = 300;
						}
						else
						{
							reg->U1BC_LEDConfigure &= ~0x1000;
							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
							pHwData->LED_Blinking = 0;
							TimeInterval = 300;
						}
					}
					else
					{
						//Turn Off LED_1
						if( reg->U1BC_LEDConfigure & 0x1000 )
						{
							reg->U1BC_LEDConfigure &= ~0x1000;
							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
						}
					}
				}
				else
				{
					// Is transmitting/receiving ??
					if( (adapter->RxByteCount != pHwData->RxByteCountLast ) ||
						(adapter->TxByteCount != pHwData->TxByteCountLast ) )
					{
						if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
						{
							reg->U1BC_LEDConfigure |= 0x3000;
							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
						}

						// Update variable
						pHwData->RxByteCountLast = adapter->RxByteCount;
						pHwData->TxByteCountLast = adapter->TxByteCount;
						TimeInterval = 200;
					}
					else
					{
						// Turn On LED_1 and blinking if transmitting/receiving
						 if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 )
						 {
							 reg->U1BC_LEDConfigure &= ~0x3000;
							 reg->U1BC_LEDConfigure |= 0x1000;
							 Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
						 }
					}
				}
				break;

			default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
				if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
				{
					reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable
					Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
				}

				if( pHwData->LED_Blinking )
				{
					// Gray blinking
					reg->U1BC_LEDConfigure &= ~0x0f;
					reg->U1BC_LEDConfigure |= 0x10;
					reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ];
					Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );

					pHwData->LED_Blinking += 2;
					if( pHwData->LED_Blinking < 40 )
						TimeInterval = 100;
					else
					{
						pHwData->LED_Blinking = 0; // Stop blinking
						reg->U1BC_LEDConfigure &= ~0x0f;
						Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
					}
					break;
				}

				if( pHwData->LED_LinkOn )
				{
					if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0
					{
						//Try to turn ON LED_0 after gray blinking
						reg->U1BC_LEDConfigure |= 0x10;
						pHwData->LED_Blinking = 1; //Start blinking
						TimeInterval = 50;
					}
				}
				else
				{
					if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0
					{
						reg->U1BC_LEDConfigure &= ~0x10;
						Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
					}
				}
				break;
		}

		//20060828.1 Active send null packet to avoid AP disconnect
		if( pHwData->LED_LinkOn )
		{
			pHwData->NullPacketCount += TimeInterval;
			if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT )
			{
				pHwData->NullPacketCount = 0;
			}
		}
	}

	pHwData->time_count += TimeInterval;
	Wb35Tx_CurrentTime(adapter, pHwData->time_count); // 20060928 add
	pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
	add_timer(&pHwData->LEDTimer);
}

static int hal_init_hardware(struct ieee80211_hw *hw)
{
	struct wbsoft_priv *priv = hw->priv;
	struct hw_data * pHwData = &priv->sHwData;
	u16 SoftwareSet;

	// Initial the variable
	pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME; // Setting Rx maximum MSDU life time
	pHwData->FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; // Setting default fragment threshold

	pHwData->InitialResource = 1;
	if (!Wb35Reg_initial(pHwData))
		goto error_reg_destroy;

	pHwData->InitialResource = 2;
	if (!Wb35Tx_initial(pHwData))
		goto error_tx_destroy;

	pHwData->InitialResource = 3;
	if (!Wb35Rx_initial(pHwData))
		goto error_rx_destroy;

	pHwData->InitialResource = 4;
	init_timer(&pHwData->LEDTimer);
	pHwData->LEDTimer.function = hal_led_control;
	pHwData->LEDTimer.data = (unsigned long) priv;
	pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000);
	add_timer(&pHwData->LEDTimer);

	//
	// For restrict to vendor's hardware
	//
	SoftwareSet = hal_software_set( pHwData );

	#ifdef Vendor2
	// Try to make sure the EEPROM contain
	SoftwareSet >>= 8;
	if( SoftwareSet != 0x82 )
		return false;
	#endif

	Wb35Rx_start(hw);
	Wb35Tx_EP2VM_start(priv);

	return 0;

error_rx_destroy:
	Wb35Rx_destroy(pHwData);
error_tx_destroy:
	Wb35Tx_destroy(pHwData);
error_reg_destroy:
	Wb35Reg_destroy(pHwData);

	pHwData->SurpriseRemove = 1;
	return -EINVAL;
}

static int wb35_hw_init(struct ieee80211_hw *hw)
{
	struct wbsoft_priv *priv = hw->priv;
	struct hw_data *	pHwData;
	u8		*pMacAddr;
	u8		*pMacAddr2;
	u8		EEPROM_region;
	u8		HwRadioOff;
	int err;

	//
	// Setting default value for Linux
	//
	priv->sLocalPara.region_INF = REGION_AUTO;
	priv->sLocalPara.TxRateMode = RATE_AUTO;
	priv->sLocalPara.bMacOperationMode = MODE_802_11_BG;	// B/G mode
	priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
	priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
	hal_set_phy_type( &priv->sHwData, RF_WB_242_1 );
	priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
	priv->sLocalPara.bPreambleMode = AUTO_MODE;
	priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
	pHwData = &priv->sHwData;
	hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );

	//added by ws for wep key error detection
	priv->sLocalPara.bWepKeyError= false;
	priv->sLocalPara.bToSelfPacketReceived = false;
	priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds

	// Initial USB hal
	pHwData = &priv->sHwData;
	err = hal_init_hardware(hw);
	if (err)
		goto error;

	EEPROM_region = hal_get_region_from_EEPROM( pHwData );
	if (EEPROM_region != REGION_AUTO)
		priv->sLocalPara.region = EEPROM_region;
	else {
		if (priv->sLocalPara.region_INF != REGION_AUTO)
			priv->sLocalPara.region = priv->sLocalPara.region_INF;
		else
			priv->sLocalPara.region = REGION_USA;	//default setting
	}

	// Get Software setting flag from hal
	priv->sLocalPara.boAntennaDiversity = false;
	if (hal_software_set(pHwData) & 0x00000001)
		priv->sLocalPara.boAntennaDiversity = true;

	// For MDS module
	Mds_initial(priv);

	//=======================================
	// Initialize the SME, SCAN, MLME, ROAM
	//=======================================

	// If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
	pMacAddr = priv->sLocalPara.ThisMacAddress;
	pMacAddr2 = priv->sLocalPara.PermanentAddress;
	hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
	if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
		memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
	else {
		// Set the user define MAC address
		hal_set_ethernet_address(pHwData, priv->sLocalPara.ThisMacAddress);
	}

	//get current antenna
	priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
#ifdef _PE_STATE_DUMP_
	printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo);
#endif
	hal_get_hw_radio_off( pHwData );

	// Waiting for HAL setting OK
	while (!hal_idle(pHwData))
		msleep(10);

	MTO_Init(priv);

	HwRadioOff = hal_get_hw_radio_off( pHwData );
	priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff;

	hal_set_radio_mode( pHwData, (unsigned char)(priv->sLocalPara.RadioOffStatus.boSwRadioOff || priv->sLocalPara.RadioOffStatus.boHwRadioOff) );

	hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
	//set a tx power for reference.....
//	sme_set_tx_power_level(priv, 12);	FIXME?

error:
	return err;
}

static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
{
	struct wb_usb *pWbUsb;
        struct usb_host_interface *interface;
	struct usb_endpoint_descriptor *endpoint;
	u32	ltmp;
	struct usb_device *udev = interface_to_usbdev(intf);
	struct wbsoft_priv *priv;
	struct ieee80211_hw *dev;
	int nr, err;

	usb_get_dev(udev);

	// 20060630.2 Check the device if it already be opened
	nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
			     0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
			     0x0, 0x400, &ltmp, 4, HZ*100 );
	if (nr < 0) {
		err = nr;
		goto error;
	}

	ltmp = cpu_to_le32(ltmp);
	if (ltmp) {  // Is already initialized?
		err = -EBUSY;
		goto error;
	}

	dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
	if (!dev) {
		err = -ENOMEM;
		goto error;
	}

	priv = dev->priv;

	spin_lock_init(&priv->SpinLock);

	pWbUsb = &priv->sHwData.WbUsb;
	pWbUsb->udev = udev;

        interface = intf->cur_altsetting;
        endpoint = &interface->endpoint[0].desc;

	if (endpoint[2].wMaxPacketSize == 512) {
		printk("[w35und] Working on USB 2.0\n");
		pWbUsb->IsUsb20 = 1;
	}

	err = wb35_hw_init(dev);
	if (err)
		goto error_free_hw;

	SET_IEEE80211_DEV(dev, &udev->dev);
	{
		struct hw_data * pHwData = &priv->sHwData;
		unsigned char		dev_addr[MAX_ADDR_LEN];
		hal_get_permanent_address(pHwData, dev_addr);
		SET_IEEE80211_PERM_ADDR(dev, dev_addr);
	}

	dev->extra_tx_headroom = 12;	/* FIXME */
	dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);

	dev->channel_change_time = 1000;
	dev->max_signal = 100;
	dev->queues = 1;

	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz;

	err = ieee80211_register_hw(dev);
	if (err)
		goto error_free_hw;

	usb_set_intfdata(intf, dev);

	return 0;

error_free_hw:
	ieee80211_free_hw(dev);
error:
	usb_put_dev(udev);
	return err;
}

static void wb35_hw_halt(struct wbsoft_priv *adapter)
{
	Mds_Destroy( adapter );

	// Turn off Rx and Tx hardware ability
	hal_stop( &adapter->sHwData );
#ifdef _PE_USB_INI_DUMP_
	printk("[w35und] Hal_stop O.K.\n");
#endif
	msleep(100);// Waiting Irp completed

	// Halt the HAL
	hal_halt(&adapter->sHwData, NULL);
}


static void wb35_disconnect(struct usb_interface *intf)
{
	struct ieee80211_hw *hw = usb_get_intfdata(intf);
	struct wbsoft_priv *priv = hw->priv;

	wb35_hw_halt(priv);

	ieee80211_stop_queues(hw);
	ieee80211_unregister_hw(hw);
	ieee80211_free_hw(hw);

	usb_set_intfdata(intf, NULL);
	usb_put_dev(interface_to_usbdev(intf));
}

static struct usb_driver wb35_driver = {
	.name		= "w35und",
	.id_table	= wb35_table,
	.probe		= wb35_probe,
	.disconnect	= wb35_disconnect,
};

static int __init wb35_init(void)
{
	return usb_register(&wb35_driver);
}

static void __exit wb35_exit(void)
{
	usb_deregister(&wb35_driver);
}

module_init(wb35_init);
module_exit(wb35_exit);