/* * Emagic EMI 2|6 usb audio interface firmware loader. * Copyright (C) 2002 * Tapio Laxström (tapio.laxstrom@iptime.fi) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, as published by * the Free Software Foundation, version 2. * * emi26.c,v 1.13 2002/03/08 13:10:26 tapio Exp */ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/init.h> #include <linux/usb.h> #include <linux/delay.h> #define MAX_INTEL_HEX_RECORD_LENGTH 16 typedef struct _INTEL_HEX_RECORD { __u32 length; __u32 address; __u32 type; __u8 data[MAX_INTEL_HEX_RECORD_LENGTH]; } INTEL_HEX_RECORD, *PINTEL_HEX_RECORD; /* include firmware (variables) */ #include "emi26_fw.h" #define EMI26_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */ #define EMI26_PRODUCT_ID 0x0100 /* EMI 2|6 without firmware */ #define EMI26B_PRODUCT_ID 0x0102 /* EMI 2|6 without firmware */ #define ANCHOR_LOAD_INTERNAL 0xA0 /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */ #define ANCHOR_LOAD_EXTERNAL 0xA3 /* This command is not implemented in the core. Requires firmware */ #define ANCHOR_LOAD_FPGA 0xA5 /* This command is not implemented in the core. Requires firmware. Emagic extension */ #define MAX_INTERNAL_ADDRESS 0x1B3F /* This is the highest internal RAM address for the AN2131Q */ #define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ #define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS) static int emi26_writememory( struct usb_device *dev, int address, unsigned char *data, int length, __u8 bRequest); static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit); static int emi26_load_firmware (struct usb_device *dev); static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id); static void emi26_disconnect(struct usb_interface *intf); static int __init emi26_init (void); static void __exit emi26_exit (void); /* thanks to drivers/usb/serial/keyspan_pda.c code */ static int emi26_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request) { int result; unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); if (!buffer) { err("emi26: kmalloc(%d) failed.", length); return -ENOMEM; } /* Note: usb_control_msg returns negative value on error or length of the * data that was written! */ result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); kfree (buffer); return result; } /* thanks to drivers/usb/serial/keyspan_pda.c code */ static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit) { int response; info("%s - %d", __FUNCTION__, reset_bit); /* printk(KERN_DEBUG "%s - %d", __FUNCTION__, reset_bit); */ response = emi26_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0); if (response < 0) { err("emi26: set_reset (%d) failed", reset_bit); } return response; } #define FW_LOAD_SIZE 1023 static int emi26_load_firmware (struct usb_device *dev) { int err; int i; int pos = 0; /* Position in hex record */ __u32 addr; /* Address to write */ __u8 *buf; buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); if (!buf) { err( "%s - error loading firmware: error = %d", __FUNCTION__, -ENOMEM); err = -ENOMEM; goto wraperr; } /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); if (err < 0) { err( "%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } /* 1. We need to put the loader for the FPGA into the EZ-USB */ for (i=0; g_Loader[i].type == 0; i++) { err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL); if (err < 0) { err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } } /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); if (err < 0) { err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } msleep(250); /* let device settle */ /* 2. We upload the FPGA firmware into the EMI * Note: collect up to 1023 (yes!) bytes and send them with * a single request. This is _much_ faster! */ do { i = 0; addr = g_bitstream[pos].address; /* intel hex records are terminated with type 0 element */ while ((g_bitstream[pos].type == 0) && (i + g_bitstream[pos].length < FW_LOAD_SIZE)) { memcpy(buf + i, g_bitstream[pos].data, g_bitstream[pos].length); i += g_bitstream[pos].length; pos++; } err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); if (err < 0) { err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } } while (i > 0); /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); if (err < 0) { err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */ for (i=0; g_Loader[i].type == 0; i++) { err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL); if (err < 0) { err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } } msleep(250); /* let device settle */ /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); if (err < 0) { err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */ for (i=0; g_Firmware[i].type == 0; i++) { if (!INTERNAL_RAM(g_Firmware[i].address)) { err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_EXTERNAL); if (err < 0) { err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } } } /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); if (err < 0) { err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } for (i=0; g_Firmware[i].type == 0; i++) { if (INTERNAL_RAM(g_Firmware[i].address)) { err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_INTERNAL); if (err < 0) { err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } } } /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); if (err < 0) { err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } msleep(250); /* let device settle */ /* return 1 to fail the driver inialization * and give real driver change to load */ err = 1; wraperr: kfree(buf); return err; } static struct usb_device_id id_table [] = { { USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) }, { USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, id_table); static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); info("%s start", __FUNCTION__); emi26_load_firmware(dev); /* do not return the driver context, let real audio driver do that */ return -EIO; } static void emi26_disconnect(struct usb_interface *intf) { } static struct usb_driver emi26_driver = { .name = "emi26 - firmware loader", .probe = emi26_probe, .disconnect = emi26_disconnect, .id_table = id_table, }; static int __init emi26_init (void) { return usb_register(&emi26_driver); } static void __exit emi26_exit (void) { usb_deregister (&emi26_driver); } module_init(emi26_init); module_exit(emi26_exit); MODULE_AUTHOR("Tapio Laxström"); MODULE_DESCRIPTION("Emagic EMI 2|6 firmware loader."); MODULE_LICENSE("GPL"); /* vi:ai:syntax=c:sw=8:ts=8:tw=80 */