/* Driver for SanDisk SDDR-09 SmartMedia reader * * (c) 2000, 2001 Robert Baruch (autophile@starband.net) * (c) 2002 Andries Brouwer (aeb@cwi.nl) * Developed with the assistance of: * (c) 2002 Alan Stern * * The SanDisk SDDR-09 SmartMedia reader uses the Shuttle EUSB-01 chip. * This chip is a programmable USB controller. In the SDDR-09, it has * been programmed to obey a certain limited set of SCSI commands. * This driver translates the "real" SCSI commands to the SDDR-09 SCSI * commands. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ /* * Known vendor commands: 12 bytes, first byte is opcode * * E7: read scatter gather * E8: read * E9: write * EA: erase * EB: reset * EC: read status * ED: read ID * EE: write CIS (?) * EF: compute checksum (?) */ #include #include #include #include #include #include "usb.h" #include "transport.h" #include "protocol.h" #include "debug.h" #include "sddr09.h" #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) #define LSB_of(s) ((s)&0xFF) #define MSB_of(s) ((s)>>8) /* #define US_DEBUGP printk */ /* * First some stuff that does not belong here: * data on SmartMedia and other cards, completely * unrelated to this driver. * Similar stuff occurs in . */ struct nand_flash_dev { int model_id; int chipshift; /* 1<recv_ctrl_pipe; else pipe = us->send_ctrl_pipe; rc = usb_stor_ctrl_transfer(us, pipe, request, requesttype, 0, 0, xfer_data, xfer_len); switch (rc) { case USB_STOR_XFER_GOOD: return 0; case USB_STOR_XFER_STALLED: return -EPIPE; default: return -EIO; } } static int sddr09_send_scsi_command(struct us_data *us, unsigned char *command, unsigned int command_len) { return sddr09_send_command(us, 0, USB_DIR_OUT, command, command_len); } #if 0 /* * Test Unit Ready Command: 12 bytes. * byte 0: opcode: 00 */ static int sddr09_test_unit_ready(struct us_data *us) { unsigned char *command = us->iobuf; int result; memset(command, 0, 6); command[1] = LUNBITS; result = sddr09_send_scsi_command(us, command, 6); US_DEBUGP("sddr09_test_unit_ready returns %d\n", result); return result; } #endif /* * Request Sense Command: 12 bytes. * byte 0: opcode: 03 * byte 4: data length */ static int sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) { unsigned char *command = us->iobuf; int result; memset(command, 0, 12); command[0] = 0x03; command[1] = LUNBITS; command[4] = buflen; result = sddr09_send_scsi_command(us, command, 12); if (result) return result; result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, sensebuf, buflen, NULL); return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); } /* * Read Command: 12 bytes. * byte 0: opcode: E8 * byte 1: last two bits: 00: read data, 01: read blockwise control, * 10: read both, 11: read pagewise control. * It turns out we need values 20, 21, 22, 23 here (LUN 1). * bytes 2-5: address (interpretation depends on byte 1, see below) * bytes 10-11: count (idem) * * A page has 512 data bytes and 64 control bytes (16 control and 48 junk). * A read data command gets data in 512-byte pages. * A read control command gets control in 64-byte chunks. * A read both command gets data+control in 576-byte chunks. * * Blocks are groups of 32 pages, and read blockwise control jumps to the * next block, while read pagewise control jumps to the next page after * reading a group of 64 control bytes. * [Here 512 = 1<iobuf; int result; command[0] = 0xE8; command[1] = LUNBITS | x; command[2] = MSB_of(fromaddress>>16); command[3] = LSB_of(fromaddress>>16); command[4] = MSB_of(fromaddress & 0xFFFF); command[5] = LSB_of(fromaddress & 0xFFFF); command[6] = 0; command[7] = 0; command[8] = 0; command[9] = 0; command[10] = MSB_of(nr_of_pages); command[11] = LSB_of(nr_of_pages); result = sddr09_send_scsi_command(us, command, 12); if (result) { US_DEBUGP("Result for send_control in sddr09_read2%d %d\n", x, result); return result; } result = usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, bulklen, use_sg, NULL); if (result != USB_STOR_XFER_GOOD) { US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n", x, result); return -EIO; } return 0; } /* * Read Data * * fromaddress counts data shorts: * increasing it by 256 shifts the bytestream by 512 bytes; * the last 8 bits are ignored. * * nr_of_pages counts pages of size (1 << pageshift). */ static int sddr09_read20(struct us_data *us, unsigned long fromaddress, int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) { int bulklen = nr_of_pages << pageshift; /* The last 8 bits of fromaddress are ignored. */ return sddr09_readX(us, 0, fromaddress, nr_of_pages, bulklen, buf, use_sg); } /* * Read Blockwise Control * * fromaddress gives the starting position (as in read data; * the last 8 bits are ignored); increasing it by 32*256 shifts * the output stream by 64 bytes. * * count counts control groups of size (1 << controlshift). * For me, controlshift = 6. Is this constant? * * After getting one control group, jump to the next block * (fromaddress += 8192). */ static int sddr09_read21(struct us_data *us, unsigned long fromaddress, int count, int controlshift, unsigned char *buf, int use_sg) { int bulklen = (count << controlshift); return sddr09_readX(us, 1, fromaddress, count, bulklen, buf, use_sg); } /* * Read both Data and Control * * fromaddress counts data shorts, ignoring control: * increasing it by 256 shifts the bytestream by 576 = 512+64 bytes; * the last 8 bits are ignored. * * nr_of_pages counts pages of size (1 << pageshift) + (1 << controlshift). */ static int sddr09_read22(struct us_data *us, unsigned long fromaddress, int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) { int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT); US_DEBUGP("sddr09_read22: reading %d pages, %d bytes\n", nr_of_pages, bulklen); return sddr09_readX(us, 2, fromaddress, nr_of_pages, bulklen, buf, use_sg); } #if 0 /* * Read Pagewise Control * * fromaddress gives the starting position (as in read data; * the last 8 bits are ignored); increasing it by 256 shifts * the output stream by 64 bytes. * * count counts control groups of size (1 << controlshift). * For me, controlshift = 6. Is this constant? * * After getting one control group, jump to the next page * (fromaddress += 256). */ static int sddr09_read23(struct us_data *us, unsigned long fromaddress, int count, int controlshift, unsigned char *buf, int use_sg) { int bulklen = (count << controlshift); return sddr09_readX(us, 3, fromaddress, count, bulklen, buf, use_sg); } #endif /* * Erase Command: 12 bytes. * byte 0: opcode: EA * bytes 6-9: erase address (big-endian, counting shorts, sector aligned). * * Always precisely one block is erased; bytes 2-5 and 10-11 are ignored. * The byte address being erased is 2*Eaddress. * The CIS cannot be erased. */ static int sddr09_erase(struct us_data *us, unsigned long Eaddress) { unsigned char *command = us->iobuf; int result; US_DEBUGP("sddr09_erase: erase address %lu\n", Eaddress); memset(command, 0, 12); command[0] = 0xEA; command[1] = LUNBITS; command[6] = MSB_of(Eaddress>>16); command[7] = LSB_of(Eaddress>>16); command[8] = MSB_of(Eaddress & 0xFFFF); command[9] = LSB_of(Eaddress & 0xFFFF); result = sddr09_send_scsi_command(us, command, 12); if (result) US_DEBUGP("Result for send_control in sddr09_erase %d\n", result); return result; } /* * Write CIS Command: 12 bytes. * byte 0: opcode: EE * bytes 2-5: write address in shorts * bytes 10-11: sector count * * This writes at the indicated address. Don't know how it differs * from E9. Maybe it does not erase? However, it will also write to * the CIS. * * When two such commands on the same page follow each other directly, * the second one is not done. */ /* * Write Command: 12 bytes. * byte 0: opcode: E9 * bytes 2-5: write address (big-endian, counting shorts, sector aligned). * bytes 6-9: erase address (big-endian, counting shorts, sector aligned). * bytes 10-11: sector count (big-endian, in 512-byte sectors). * * If write address equals erase address, the erase is done first, * otherwise the write is done first. When erase address equals zero * no erase is done? */ static int sddr09_writeX(struct us_data *us, unsigned long Waddress, unsigned long Eaddress, int nr_of_pages, int bulklen, unsigned char *buf, int use_sg) { unsigned char *command = us->iobuf; int result; command[0] = 0xE9; command[1] = LUNBITS; command[2] = MSB_of(Waddress>>16); command[3] = LSB_of(Waddress>>16); command[4] = MSB_of(Waddress & 0xFFFF); command[5] = LSB_of(Waddress & 0xFFFF); command[6] = MSB_of(Eaddress>>16); command[7] = LSB_of(Eaddress>>16); command[8] = MSB_of(Eaddress & 0xFFFF); command[9] = LSB_of(Eaddress & 0xFFFF); command[10] = MSB_of(nr_of_pages); command[11] = LSB_of(nr_of_pages); result = sddr09_send_scsi_command(us, command, 12); if (result) { US_DEBUGP("Result for send_control in sddr09_writeX %d\n", result); return result; } result = usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, bulklen, use_sg, NULL); if (result != USB_STOR_XFER_GOOD) { US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n", result); return -EIO; } return 0; } /* erase address, write same address */ static int sddr09_write_inplace(struct us_data *us, unsigned long address, int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) { int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT); return sddr09_writeX(us, address, address, nr_of_pages, bulklen, buf, use_sg); } #if 0 /* * Read Scatter Gather Command: 3+4n bytes. * byte 0: opcode E7 * byte 2: n * bytes 4i-1,4i,4i+1: page address * byte 4i+2: page count * (i=1..n) * * This reads several pages from the card to a single memory buffer. * The last two bits of byte 1 have the same meaning as for E8. */ static int sddr09_read_sg_test_only(struct us_data *us) { unsigned char *command = us->iobuf; int result, bulklen, nsg, ct; unsigned char *buf; unsigned long address; nsg = bulklen = 0; command[0] = 0xE7; command[1] = LUNBITS; command[2] = 0; address = 040000; ct = 1; nsg++; bulklen += (ct << 9); command[4*nsg+2] = ct; command[4*nsg+1] = ((address >> 9) & 0xFF); command[4*nsg+0] = ((address >> 17) & 0xFF); command[4*nsg-1] = ((address >> 25) & 0xFF); address = 0340000; ct = 1; nsg++; bulklen += (ct << 9); command[4*nsg+2] = ct; command[4*nsg+1] = ((address >> 9) & 0xFF); command[4*nsg+0] = ((address >> 17) & 0xFF); command[4*nsg-1] = ((address >> 25) & 0xFF); address = 01000000; ct = 2; nsg++; bulklen += (ct << 9); command[4*nsg+2] = ct; command[4*nsg+1] = ((address >> 9) & 0xFF); command[4*nsg+0] = ((address >> 17) & 0xFF); command[4*nsg-1] = ((address >> 25) & 0xFF); command[2] = nsg; result = sddr09_send_scsi_command(us, command, 4*nsg+3); if (result) { US_DEBUGP("Result for send_control in sddr09_read_sg %d\n", result); return result; } buf = kmalloc(bulklen, GFP_NOIO); if (!buf) return -ENOMEM; result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, buf, bulklen, NULL); kfree(buf); if (result != USB_STOR_XFER_GOOD) { US_DEBUGP("Result for bulk_transfer in sddr09_read_sg %d\n", result); return -EIO; } return 0; } #endif /* * Read Status Command: 12 bytes. * byte 0: opcode: EC * * Returns 64 bytes, all zero except for the first. * bit 0: 1: Error * bit 5: 1: Suspended * bit 6: 1: Ready * bit 7: 1: Not write-protected */ static int sddr09_read_status(struct us_data *us, unsigned char *status) { unsigned char *command = us->iobuf; unsigned char *data = us->iobuf; int result; US_DEBUGP("Reading status...\n"); memset(command, 0, 12); command[0] = 0xEC; command[1] = LUNBITS; result = sddr09_send_scsi_command(us, command, 12); if (result) return result; result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, data, 64, NULL); *status = data[0]; return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); } static int sddr09_read_data(struct us_data *us, unsigned long address, unsigned int sectors) { struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; unsigned char *buffer; unsigned int lba, maxlba, pba; unsigned int page, pages; unsigned int len, offset; struct scatterlist *sg; int result; // Figure out the initial LBA and page lba = address >> info->blockshift; page = (address & info->blockmask); maxlba = info->capacity >> (info->pageshift + info->blockshift); if (lba >= maxlba) return -EIO; // Since we only read in one block at a time, we have to create // a bounce buffer and move the data a piece at a time between the // bounce buffer and the actual transfer buffer. len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { printk(KERN_WARNING "sddr09_read_data: Out of memory\n"); return -ENOMEM; } // This could be made much more efficient by checking for // contiguous LBA's. Another exercise left to the student. result = 0; offset = 0; sg = NULL; while (sectors > 0) { /* Find number of pages we can read in this block */ pages = min(sectors, info->blocksize - page); len = pages << info->pageshift; /* Not overflowing capacity? */ if (lba >= maxlba) { US_DEBUGP("Error: Requested lba %u exceeds " "maximum %u\n", lba, maxlba); result = -EIO; break; } /* Find where this lba lives on disk */ pba = info->lba_to_pba[lba]; if (pba == UNDEF) { /* this lba was never written */ US_DEBUGP("Read %d zero pages (LBA %d) page %d\n", pages, lba, page); /* This is not really an error. It just means that the block has never been written. Instead of returning an error it is better to return all zero data. */ memset(buffer, 0, len); } else { US_DEBUGP("Read %d pages, from PBA %d" " (LBA %d) page %d\n", pages, pba, lba, page); address = ((pba << info->blockshift) + page) << info->pageshift; result = sddr09_read20(us, address>>1, pages, info->pageshift, buffer, 0); if (result) break; } // Store the data in the transfer buffer usb_stor_access_xfer_buf(buffer, len, us->srb, &sg, &offset, TO_XFER_BUF); page = 0; lba++; sectors -= pages; } kfree(buffer); return result; } static unsigned int sddr09_find_unused_pba(struct sddr09_card_info *info, unsigned int lba) { static unsigned int lastpba = 1; int zonestart, end, i; zonestart = (lba/1000) << 10; end = info->capacity >> (info->blockshift + info->pageshift); end -= zonestart; if (end > 1024) end = 1024; for (i = lastpba+1; i < end; i++) { if (info->pba_to_lba[zonestart+i] == UNDEF) { lastpba = i; return zonestart+i; } } for (i = 0; i <= lastpba; i++) { if (info->pba_to_lba[zonestart+i] == UNDEF) { lastpba = i; return zonestart+i; } } return 0; } static int sddr09_write_lba(struct us_data *us, unsigned int lba, unsigned int page, unsigned int pages, unsigned char *ptr, unsigned char *blockbuffer) { struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; unsigned long address; unsigned int pba, lbap; unsigned int pagelen; unsigned char *bptr, *cptr, *xptr; unsigned char ecc[3]; int i, result, isnew; lbap = ((lba % 1000) << 1) | 0x1000; if (parity[MSB_of(lbap) ^ LSB_of(lbap)]) lbap ^= 1; pba = info->lba_to_pba[lba]; isnew = 0; if (pba == UNDEF) { pba = sddr09_find_unused_pba(info, lba); if (!pba) { printk(KERN_WARNING "sddr09_write_lba: Out of unused blocks\n"); return -ENOSPC; } info->pba_to_lba[pba] = lba; info->lba_to_pba[lba] = pba; isnew = 1; } if (pba == 1) { /* Maybe it is impossible to write to PBA 1. Fake success, but don't do anything. */ printk(KERN_WARNING "sddr09: avoid writing to pba 1\n"); return 0; } pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT); /* read old contents */ address = (pba << (info->pageshift + info->blockshift)); result = sddr09_read22(us, address>>1, info->blocksize, info->pageshift, blockbuffer, 0); if (result) return result; /* check old contents and fill lba */ for (i = 0; i < info->blocksize; i++) { bptr = blockbuffer + i*pagelen; cptr = bptr + info->pagesize; nand_compute_ecc(bptr, ecc); if (!nand_compare_ecc(cptr+13, ecc)) { US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n", i, pba); nand_store_ecc(cptr+13, ecc); } nand_compute_ecc(bptr+(info->pagesize / 2), ecc); if (!nand_compare_ecc(cptr+8, ecc)) { US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n", i, pba); nand_store_ecc(cptr+8, ecc); } cptr[6] = cptr[11] = MSB_of(lbap); cptr[7] = cptr[12] = LSB_of(lbap); } /* copy in new stuff and compute ECC */ xptr = ptr; for (i = page; i < page+pages; i++) { bptr = blockbuffer + i*pagelen; cptr = bptr + info->pagesize; memcpy(bptr, xptr, info->pagesize); xptr += info->pagesize; nand_compute_ecc(bptr, ecc); nand_store_ecc(cptr+13, ecc); nand_compute_ecc(bptr+(info->pagesize / 2), ecc); nand_store_ecc(cptr+8, ecc); } US_DEBUGP("Rewrite PBA %d (LBA %d)\n", pba, lba); result = sddr09_write_inplace(us, address>>1, info->blocksize, info->pageshift, blockbuffer, 0); US_DEBUGP("sddr09_write_inplace returns %d\n", result); #if 0 { unsigned char status = 0; int result2 = sddr09_read_status(us, &status); if (result2) US_DEBUGP("sddr09_write_inplace: cannot read status\n"); else if (status != 0xc0) US_DEBUGP("sddr09_write_inplace: status after write: 0x%x\n", status); } #endif #if 0 { int result2 = sddr09_test_unit_ready(us); } #endif return result; } static int sddr09_write_data(struct us_data *us, unsigned long address, unsigned int sectors) { struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; unsigned int lba, maxlba, page, pages; unsigned int pagelen, blocklen; unsigned char *blockbuffer; unsigned char *buffer; unsigned int len, offset; struct scatterlist *sg; int result; // Figure out the initial LBA and page lba = address >> info->blockshift; page = (address & info->blockmask); maxlba = info->capacity >> (info->pageshift + info->blockshift); if (lba >= maxlba) return -EIO; // blockbuffer is used for reading in the old data, overwriting // with the new data, and performing ECC calculations /* TODO: instead of doing kmalloc/kfree for each write, add a bufferpointer to the info structure */ pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT); blocklen = (pagelen << info->blockshift); blockbuffer = kmalloc(blocklen, GFP_NOIO); if (!blockbuffer) { printk(KERN_WARNING "sddr09_write_data: Out of memory\n"); return -ENOMEM; } // Since we don't write the user data directly to the device, // we have to create a bounce buffer and move the data a piece // at a time between the bounce buffer and the actual transfer buffer. len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { printk(KERN_WARNING "sddr09_write_data: Out of memory\n"); kfree(blockbuffer); return -ENOMEM; } result = 0; offset = 0; sg = NULL; while (sectors > 0) { // Write as many sectors as possible in this block pages = min(sectors, info->blocksize - page); len = (pages << info->pageshift); /* Not overflowing capacity? */ if (lba >= maxlba) { US_DEBUGP("Error: Requested lba %u exceeds " "maximum %u\n", lba, maxlba); result = -EIO; break; } // Get the data from the transfer buffer usb_stor_access_xfer_buf(buffer, len, us->srb, &sg, &offset, FROM_XFER_BUF); result = sddr09_write_lba(us, lba, page, pages, buffer, blockbuffer); if (result) break; page = 0; lba++; sectors -= pages; } kfree(buffer); kfree(blockbuffer); return result; } static int sddr09_read_control(struct us_data *us, unsigned long address, unsigned int blocks, unsigned char *content, int use_sg) { US_DEBUGP("Read control address %lu, blocks %d\n", address, blocks); return sddr09_read21(us, address, blocks, CONTROL_SHIFT, content, use_sg); } /* * Read Device ID Command: 12 bytes. * byte 0: opcode: ED * * Returns 2 bytes: Manufacturer ID and Device ID. * On more recent cards 3 bytes: the third byte is an option code A5 * signifying that the secret command to read an 128-bit ID is available. * On still more recent cards 4 bytes: the fourth byte C0 means that * a second read ID cmd is available. */ static int sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) { unsigned char *command = us->iobuf; unsigned char *content = us->iobuf; int result, i; memset(command, 0, 12); command[0] = 0xED; command[1] = LUNBITS; result = sddr09_send_scsi_command(us, command, 12); if (result) return result; result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, content, 64, NULL); for (i = 0; i < 4; i++) deviceID[i] = content[i]; return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); } static int sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) { int result; unsigned char status; result = sddr09_read_status(us, &status); if (result) { US_DEBUGP("sddr09_get_wp: read_status fails\n"); return result; } US_DEBUGP("sddr09_get_wp: status 0x%02X", status); if ((status & 0x80) == 0) { info->flags |= SDDR09_WP; /* write protected */ US_DEBUGP(" WP"); } if (status & 0x40) US_DEBUGP(" Ready"); if (status & LUNBITS) US_DEBUGP(" Suspended"); if (status & 0x1) US_DEBUGP(" Error"); US_DEBUGP("\n"); return 0; } #if 0 /* * Reset Command: 12 bytes. * byte 0: opcode: EB */ static int sddr09_reset(struct us_data *us) { unsigned char *command = us->iobuf; memset(command, 0, 12); command[0] = 0xEB; command[1] = LUNBITS; return sddr09_send_scsi_command(us, command, 12); } #endif static struct nand_flash_dev * sddr09_get_cardinfo(struct us_data *us, unsigned char flags) { struct nand_flash_dev *cardinfo; unsigned char deviceID[4]; char blurbtxt[256]; int result; US_DEBUGP("Reading capacity...\n"); result = sddr09_read_deviceID(us, deviceID); if (result) { US_DEBUGP("Result of read_deviceID is %d\n", result); printk(KERN_WARNING "sddr09: could not read card info\n"); return NULL; } sprintf(blurbtxt, "sddr09: Found Flash card, ID = %02X %02X %02X %02X", deviceID[0], deviceID[1], deviceID[2], deviceID[3]); /* Byte 0 is the manufacturer */ sprintf(blurbtxt + strlen(blurbtxt), ": Manuf. %s", nand_flash_manufacturer(deviceID[0])); /* Byte 1 is the device type */ cardinfo = nand_find_id(deviceID[1]); if (cardinfo) { /* MB or MiB? It is neither. A 16 MB card has 17301504 raw bytes, of which 16384000 are usable for user data. */ sprintf(blurbtxt + strlen(blurbtxt), ", %d MB", 1<<(cardinfo->chipshift - 20)); } else { sprintf(blurbtxt + strlen(blurbtxt), ", type unrecognized"); } /* Byte 2 is code to signal availability of 128-bit ID */ if (deviceID[2] == 0xa5) { sprintf(blurbtxt + strlen(blurbtxt), ", 128-bit ID"); } /* Byte 3 announces the availability of another read ID command */ if (deviceID[3] == 0xc0) { sprintf(blurbtxt + strlen(blurbtxt), ", extra cmd"); } if (flags & SDDR09_WP) sprintf(blurbtxt + strlen(blurbtxt), ", WP"); printk(KERN_WARNING "%s\n", blurbtxt); return cardinfo; } static int sddr09_read_map(struct us_data *us) { struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; int numblocks, alloc_len, alloc_blocks; int i, j, result; unsigned char *buffer, *buffer_end, *ptr; unsigned int lba, lbact; if (!info->capacity) return -1; // size of a block is 1 << (blockshift + pageshift) bytes // divide into the total capacity to get the number of blocks numblocks = info->capacity >> (info->blockshift + info->pageshift); // read 64 bytes for every block (actually 1 << CONTROL_SHIFT) // but only use a 64 KB buffer // buffer size used must be a multiple of (1 << CONTROL_SHIFT) #define SDDR09_READ_MAP_BUFSZ 65536 alloc_blocks = min(numblocks, SDDR09_READ_MAP_BUFSZ >> CONTROL_SHIFT); alloc_len = (alloc_blocks << CONTROL_SHIFT); buffer = kmalloc(alloc_len, GFP_NOIO); if (buffer == NULL) { printk(KERN_WARNING "sddr09_read_map: out of memory\n"); result = -1; goto done; } buffer_end = buffer + alloc_len; #undef SDDR09_READ_MAP_BUFSZ kfree(info->lba_to_pba); kfree(info->pba_to_lba); info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO); info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO); if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) { printk(KERN_WARNING "sddr09_read_map: out of memory\n"); result = -1; goto done; } for (i = 0; i < numblocks; i++) info->lba_to_pba[i] = info->pba_to_lba[i] = UNDEF; /* * Define lba-pba translation table */ ptr = buffer_end; for (i = 0; i < numblocks; i++) { ptr += (1 << CONTROL_SHIFT); if (ptr >= buffer_end) { unsigned long address; address = i << (info->pageshift + info->blockshift); result = sddr09_read_control( us, address>>1, min(alloc_blocks, numblocks - i), buffer, 0); if (result) { result = -1; goto done; } ptr = buffer; } if (i == 0 || i == 1) { info->pba_to_lba[i] = UNUSABLE; continue; } /* special PBAs have control field 0^16 */ for (j = 0; j < 16; j++) if (ptr[j] != 0) goto nonz; info->pba_to_lba[i] = UNUSABLE; printk(KERN_WARNING "sddr09: PBA %d has no logical mapping\n", i); continue; nonz: /* unwritten PBAs have control field FF^16 */ for (j = 0; j < 16; j++) if (ptr[j] != 0xff) goto nonff; continue; nonff: /* normal PBAs start with six FFs */ if (j < 6) { printk(KERN_WARNING "sddr09: PBA %d has no logical mapping: " "reserved area = %02X%02X%02X%02X " "data status %02X block status %02X\n", i, ptr[0], ptr[1], ptr[2], ptr[3], ptr[4], ptr[5]); info->pba_to_lba[i] = UNUSABLE; continue; } if ((ptr[6] >> 4) != 0x01) { printk(KERN_WARNING "sddr09: PBA %d has invalid address field " "%02X%02X/%02X%02X\n", i, ptr[6], ptr[7], ptr[11], ptr[12]); info->pba_to_lba[i] = UNUSABLE; continue; } /* check even parity */ if (parity[ptr[6] ^ ptr[7]]) { printk(KERN_WARNING "sddr09: Bad parity in LBA for block %d" " (%02X %02X)\n", i, ptr[6], ptr[7]); info->pba_to_lba[i] = UNUSABLE; continue; } lba = short_pack(ptr[7], ptr[6]); lba = (lba & 0x07FF) >> 1; /* * Every 1024 physical blocks ("zone"), the LBA numbers * go back to zero, but are within a higher block of LBA's. * Also, there is a maximum of 1000 LBA's per zone. * In other words, in PBA 1024-2047 you will find LBA 0-999 * which are really LBA 1000-1999. This allows for 24 bad * or special physical blocks per zone. */ if (lba >= 1000) { printk(KERN_WARNING "sddr09: Bad low LBA %d for block %d\n", lba, i); goto possibly_erase; } lba += 1000*(i/0x400); if (info->lba_to_pba[lba] != UNDEF) { printk(KERN_WARNING "sddr09: LBA %d seen for PBA %d and %d\n", lba, info->lba_to_pba[lba], i); goto possibly_erase; } info->pba_to_lba[i] = lba; info->lba_to_pba[lba] = i; continue; possibly_erase: if (erase_bad_lba_entries) { unsigned long address; address = (i << (info->pageshift + info->blockshift)); sddr09_erase(us, address>>1); info->pba_to_lba[i] = UNDEF; } else info->pba_to_lba[i] = UNUSABLE; } /* * Approximate capacity. This is not entirely correct yet, * since a zone with less than 1000 usable pages leads to * missing LBAs. Especially if it is the last zone, some * LBAs can be past capacity. */ lbact = 0; for (i = 0; i < numblocks; i += 1024) { int ct = 0; for (j = 0; j < 1024 && i+j < numblocks; j++) { if (info->pba_to_lba[i+j] != UNUSABLE) { if (ct >= 1000) info->pba_to_lba[i+j] = SPARE; else ct++; } } lbact += ct; } info->lbact = lbact; US_DEBUGP("Found %d LBA's\n", lbact); result = 0; done: if (result != 0) { kfree(info->lba_to_pba); kfree(info->pba_to_lba); info->lba_to_pba = NULL; info->pba_to_lba = NULL; } kfree(buffer); return result; } static void sddr09_card_info_destructor(void *extra) { struct sddr09_card_info *info = (struct sddr09_card_info *)extra; if (!info) return; kfree(info->lba_to_pba); kfree(info->pba_to_lba); } static int sddr09_common_init(struct us_data *us) { int result; /* set the configuration -- STALL is an acceptable response here */ if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) { US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev ->actconfig->desc.bConfigurationValue); return -EINVAL; } result = usb_reset_configuration(us->pusb_dev); US_DEBUGP("Result of usb_reset_configuration is %d\n", result); if (result == -EPIPE) { US_DEBUGP("-- stall on control interface\n"); } else if (result != 0) { /* it's not a stall, but another error -- time to bail */ US_DEBUGP("-- Unknown error. Rejecting device\n"); return -EINVAL; } us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_NOIO); if (!us->extra) return -ENOMEM; us->extra_destructor = sddr09_card_info_destructor; nand_init_ecc(); return 0; } /* * This is needed at a very early stage. If this is not listed in the * unusual devices list but called from here then LUN 0 of the combo reader * is not recognized. But I do not know what precisely these calls do. */ int usb_stor_sddr09_dpcm_init(struct us_data *us) { int result; unsigned char *data = us->iobuf; result = sddr09_common_init(us); if (result) return result; result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2); if (result) { US_DEBUGP("sddr09_init: send_command fails\n"); return result; } US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]); // get 07 02 result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2); if (result) { US_DEBUGP("sddr09_init: 2nd send_command fails\n"); return result; } US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]); // get 07 00 result = sddr09_request_sense(us, data, 18); if (result == 0 && data[2] != 0) { int j; for (j=0; j<18; j++) printk(" %02X", data[j]); printk("\n"); // get 70 00 00 00 00 00 00 * 00 00 00 00 00 00 // 70: current command // sense key 0, sense code 0, extd sense code 0 // additional transfer length * = sizeof(data) - 7 // Or: 70 00 06 00 00 00 00 0b 00 00 00 00 28 00 00 00 00 00 // sense key 06, sense code 28: unit attention, // not ready to ready transition } // test unit ready return 0; /* not result */ } /* * Transport for the Microtech DPCM-USB */ int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) { int ret; US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun); switch (srb->device->lun) { case 0: /* * LUN 0 corresponds to the CompactFlash card reader. */ ret = usb_stor_CB_transport(srb, us); break; case 1: /* * LUN 1 corresponds to the SmartMedia card reader. */ /* * Set the LUN to 0 (just in case). */ srb->device->lun = 0; ret = sddr09_transport(srb, us); srb->device->lun = 1; break; default: US_DEBUGP("dpcm_transport: Invalid LUN %d\n", srb->device->lun); ret = USB_STOR_TRANSPORT_ERROR; break; } return ret; } /* * Transport for the Sandisk SDDR-09 */ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) { static unsigned char sensekey = 0, sensecode = 0; static unsigned char havefakesense = 0; int result, i; unsigned char *ptr = us->iobuf; unsigned long capacity; unsigned int page, pages; struct sddr09_card_info *info; static unsigned char inquiry_response[8] = { 0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00 }; /* note: no block descriptor support */ static unsigned char mode_page_01[19] = { 0x00, 0x0F, 0x00, 0x0, 0x0, 0x0, 0x00, 0x01, 0x0A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; info = (struct sddr09_card_info *)us->extra; if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) { /* for a faked command, we have to follow with a faked sense */ memset(ptr, 0, 18); ptr[0] = 0x70; ptr[2] = sensekey; ptr[7] = 11; ptr[12] = sensecode; usb_stor_set_xfer_buf(ptr, 18, srb); sensekey = sensecode = havefakesense = 0; return USB_STOR_TRANSPORT_GOOD; } havefakesense = 1; /* Dummy up a response for INQUIRY since SDDR09 doesn't respond to INQUIRY commands */ if (srb->cmnd[0] == INQUIRY) { memcpy(ptr, inquiry_response, 8); fill_inquiry_response(us, ptr, 36); return USB_STOR_TRANSPORT_GOOD; } if (srb->cmnd[0] == READ_CAPACITY) { struct nand_flash_dev *cardinfo; sddr09_get_wp(us, info); /* read WP bit */ cardinfo = sddr09_get_cardinfo(us, info->flags); if (!cardinfo) { /* probably no media */ init_error: sensekey = 0x02; /* not ready */ sensecode = 0x3a; /* medium not present */ return USB_STOR_TRANSPORT_FAILED; } info->capacity = (1 << cardinfo->chipshift); info->pageshift = cardinfo->pageshift; info->pagesize = (1 << info->pageshift); info->blockshift = cardinfo->blockshift; info->blocksize = (1 << info->blockshift); info->blockmask = info->blocksize - 1; // map initialization, must follow get_cardinfo() if (sddr09_read_map(us)) { /* probably out of memory */ goto init_error; } // Report capacity capacity = (info->lbact << info->blockshift) - 1; ((__be32 *) ptr)[0] = cpu_to_be32(capacity); // Report page size ((__be32 *) ptr)[1] = cpu_to_be32(info->pagesize); usb_stor_set_xfer_buf(ptr, 8, srb); return USB_STOR_TRANSPORT_GOOD; } if (srb->cmnd[0] == MODE_SENSE_10) { int modepage = (srb->cmnd[2] & 0x3F); /* They ask for the Read/Write error recovery page, or for all pages. */ /* %% We should check DBD %% */ if (modepage == 0x01 || modepage == 0x3F) { US_DEBUGP("SDDR09: Dummy up request for " "mode page 0x%x\n", modepage); memcpy(ptr, mode_page_01, sizeof(mode_page_01)); ((__be16*)ptr)[0] = cpu_to_be16(sizeof(mode_page_01) - 2); ptr[3] = (info->flags & SDDR09_WP) ? 0x80 : 0; usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb); return USB_STOR_TRANSPORT_GOOD; } sensekey = 0x05; /* illegal request */ sensecode = 0x24; /* invalid field in CDB */ return USB_STOR_TRANSPORT_FAILED; } if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) return USB_STOR_TRANSPORT_GOOD; havefakesense = 0; if (srb->cmnd[0] == READ_10) { page = short_pack(srb->cmnd[3], srb->cmnd[2]); page <<= 16; page |= short_pack(srb->cmnd[5], srb->cmnd[4]); pages = short_pack(srb->cmnd[8], srb->cmnd[7]); US_DEBUGP("READ_10: read page %d pagect %d\n", page, pages); result = sddr09_read_data(us, page, pages); return (result == 0 ? USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); } if (srb->cmnd[0] == WRITE_10) { page = short_pack(srb->cmnd[3], srb->cmnd[2]); page <<= 16; page |= short_pack(srb->cmnd[5], srb->cmnd[4]); pages = short_pack(srb->cmnd[8], srb->cmnd[7]); US_DEBUGP("WRITE_10: write page %d pagect %d\n", page, pages); result = sddr09_write_data(us, page, pages); return (result == 0 ? USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); } /* catch-all for all other commands, except * pass TEST_UNIT_READY and REQUEST_SENSE through */ if (srb->cmnd[0] != TEST_UNIT_READY && srb->cmnd[0] != REQUEST_SENSE) { sensekey = 0x05; /* illegal request */ sensecode = 0x20; /* invalid command */ havefakesense = 1; return USB_STOR_TRANSPORT_FAILED; } for (; srb->cmd_len<12; srb->cmd_len++) srb->cmnd[srb->cmd_len] = 0; srb->cmnd[1] = LUNBITS; ptr[0] = 0; for (i=0; i<12; i++) sprintf(ptr+strlen(ptr), "%02X ", srb->cmnd[i]); US_DEBUGP("SDDR09: Send control for command %s\n", ptr); result = sddr09_send_scsi_command(us, srb->cmnd, 12); if (result) { US_DEBUGP("sddr09_transport: sddr09_send_scsi_command " "returns %d\n", result); return USB_STOR_TRANSPORT_ERROR; } if (scsi_bufflen(srb) == 0) return USB_STOR_TRANSPORT_GOOD; if (srb->sc_data_direction == DMA_TO_DEVICE || srb->sc_data_direction == DMA_FROM_DEVICE) { unsigned int pipe = (srb->sc_data_direction == DMA_TO_DEVICE) ? us->send_bulk_pipe : us->recv_bulk_pipe; US_DEBUGP("SDDR09: %s %d bytes\n", (srb->sc_data_direction == DMA_TO_DEVICE) ? "sending" : "receiving", scsi_bufflen(srb)); result = usb_stor_bulk_srb(us, pipe, srb); return (result == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); } return USB_STOR_TRANSPORT_GOOD; } /* * Initialization routine for the sddr09 subdriver */ int usb_stor_sddr09_init(struct us_data *us) { return sddr09_common_init(us); }