/* linux/drivers/video/sm501fb.c * * Copyright (c) 2006 Simtec Electronics * Vincent Sanders <vince@simtec.co.uk> * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Framebuffer driver for the Silicon Motion SM501 */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/mm.h> #include <linux/tty.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/fb.h> #include <linux/init.h> #include <linux/vmalloc.h> #include <linux/dma-mapping.h> #include <linux/interrupt.h> #include <linux/workqueue.h> #include <linux/wait.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/console.h> #include <asm/io.h> #include <asm/uaccess.h> #include <asm/div64.h> #ifdef CONFIG_PM #include <linux/pm.h> #endif #include <linux/sm501.h> #include <linux/sm501-regs.h> #define NR_PALETTE 256 enum sm501_controller { HEAD_CRT = 0, HEAD_PANEL = 1, }; /* SM501 memory adress */ struct sm501_mem { unsigned long size; unsigned long sm_addr; void __iomem *k_addr; }; /* private data that is shared between all frambuffers* */ struct sm501fb_info { struct device *dev; struct fb_info *fb[2]; /* fb info for both heads */ struct resource *fbmem_res; /* framebuffer resource */ struct resource *regs_res; /* registers resource */ struct sm501_platdata_fb *pdata; /* our platform data */ unsigned long pm_crt_ctrl; /* pm: crt ctrl save */ int irq; int swap_endian; /* set to swap rgb=>bgr */ void __iomem *regs; /* remapped registers */ void __iomem *fbmem; /* remapped framebuffer */ size_t fbmem_len; /* length of remapped region */ }; /* per-framebuffer private data */ struct sm501fb_par { u32 pseudo_palette[16]; enum sm501_controller head; struct sm501_mem cursor; struct sm501_mem screen; struct fb_ops ops; void *store_fb; void *store_cursor; void __iomem *cursor_regs; struct sm501fb_info *info; }; /* Helper functions */ static inline int h_total(struct fb_var_screeninfo *var) { return var->xres + var->left_margin + var->right_margin + var->hsync_len; } static inline int v_total(struct fb_var_screeninfo *var) { return var->yres + var->upper_margin + var->lower_margin + var->vsync_len; } /* sm501fb_sync_regs() * * This call is mainly for PCI bus systems where we need to * ensure that any writes to the bus are completed before the * next phase, or after completing a function. */ static inline void sm501fb_sync_regs(struct sm501fb_info *info) { readl(info->regs); } /* sm501_alloc_mem * * This is an attempt to lay out memory for the two framebuffers and * everything else * * |fbmem_res->start fbmem_res->end| * | | * |fb[0].fix.smem_start | |fb[1].fix.smem_start | 2K | * |-> fb[0].fix.smem_len <-| spare |-> fb[1].fix.smem_len <-|-> cursors <-| * * The "spare" space is for the 2d engine data * the fixed is space for the cursors (2x1Kbyte) * * we need to allocate memory for the 2D acceleration engine * command list and the data for the engine to deal with. * * - all allocations must be 128bit aligned * - cursors are 64x64x2 bits (1Kbyte) * */ #define SM501_MEMF_CURSOR (1) #define SM501_MEMF_PANEL (2) #define SM501_MEMF_CRT (4) #define SM501_MEMF_ACCEL (8) static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem, unsigned int why, size_t size) { unsigned int ptr = 0; switch (why) { case SM501_MEMF_CURSOR: ptr = inf->fbmem_len - size; inf->fbmem_len = ptr; break; case SM501_MEMF_PANEL: ptr = inf->fbmem_len - size; if (ptr < inf->fb[0]->fix.smem_len) return -ENOMEM; break; case SM501_MEMF_CRT: ptr = 0; break; case SM501_MEMF_ACCEL: ptr = inf->fb[0]->fix.smem_len; if ((ptr + size) > (inf->fb[1]->fix.smem_start - inf->fbmem_res->start)) return -ENOMEM; break; default: return -EINVAL; } mem->size = size; mem->sm_addr = ptr; mem->k_addr = inf->fbmem + ptr; dev_dbg(inf->dev, "%s: result %08lx, %p - %u, %zd\n", __func__, mem->sm_addr, mem->k_addr, why, size); return 0; } /* sm501fb_ps_to_hz * * Converts a period in picoseconds to Hz. * * Note, we try to keep this in Hz to minimise rounding with * the limited PLL settings on the SM501. */ static unsigned long sm501fb_ps_to_hz(unsigned long psvalue) { unsigned long long numerator=1000000000000ULL; /* 10^12 / picosecond period gives frequency in Hz */ do_div(numerator, psvalue); return (unsigned long)numerator; } /* sm501fb_hz_to_ps is identical to the oposite transform */ #define sm501fb_hz_to_ps(x) sm501fb_ps_to_hz(x) /* sm501fb_setup_gamma * * Programs a linear 1.0 gamma ramp in case the gamma * correction is enabled without programming anything else. */ static void sm501fb_setup_gamma(struct sm501fb_info *fbi, unsigned long palette) { unsigned long value = 0; int offset; /* set gamma values */ for (offset = 0; offset < 256 * 4; offset += 4) { writel(value, fbi->regs + palette + offset); value += 0x010101; /* Advance RGB by 1,1,1.*/ } } /* sm501fb_check_var * * check common variables for both panel and crt */ static int sm501fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct sm501fb_par *par = info->par; struct sm501fb_info *sm = par->info; unsigned long tmp; /* check we can fit these values into the registers */ if (var->hsync_len > 255 || var->vsync_len > 255) return -EINVAL; if ((var->xres + var->right_margin) >= 4096) return -EINVAL; if ((var->yres + var->lower_margin) > 2048) return -EINVAL; /* hard limits of device */ if (h_total(var) > 4096 || v_total(var) > 2048) return -EINVAL; /* check our line length is going to be 128 bit aligned */ tmp = (var->xres * var->bits_per_pixel) / 8; if ((tmp & 15) != 0) return -EINVAL; /* check the virtual size */ if (var->xres_virtual > 4096 || var->yres_virtual > 2048) return -EINVAL; /* can cope with 8,16 or 32bpp */ if (var->bits_per_pixel <= 8) var->bits_per_pixel = 8; else if (var->bits_per_pixel <= 16) var->bits_per_pixel = 16; else if (var->bits_per_pixel == 24) var->bits_per_pixel = 32; /* set r/g/b positions and validate bpp */ switch(var->bits_per_pixel) { case 8: var->red.length = var->bits_per_pixel; var->red.offset = 0; var->green.length = var->bits_per_pixel; var->green.offset = 0; var->blue.length = var->bits_per_pixel; var->blue.offset = 0; var->transp.length = 0; break; case 16: if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) { var->red.offset = 11; var->green.offset = 5; var->blue.offset = 0; } else { var->blue.offset = 11; var->green.offset = 5; var->red.offset = 0; } var->red.length = 5; var->green.length = 6; var->blue.length = 5; var->transp.length = 0; break; case 32: if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) { var->transp.offset = 0; var->red.offset = 8; var->green.offset = 16; var->blue.offset = 24; } else { var->transp.offset = 24; var->red.offset = 16; var->green.offset = 8; var->blue.offset = 0; } var->red.length = 8; var->green.length = 8; var->blue.length = 8; var->transp.length = 0; break; default: return -EINVAL; } return 0; } /* * sm501fb_check_var_crt(): * * check the parameters for the CRT head, and either bring them * back into range, or return -EINVAL. */ static int sm501fb_check_var_crt(struct fb_var_screeninfo *var, struct fb_info *info) { return sm501fb_check_var(var, info); } /* sm501fb_check_var_pnl(): * * check the parameters for the CRT head, and either bring them * back into range, or return -EINVAL. */ static int sm501fb_check_var_pnl(struct fb_var_screeninfo *var, struct fb_info *info) { return sm501fb_check_var(var, info); } /* sm501fb_set_par_common * * set common registers for framebuffers */ static int sm501fb_set_par_common(struct fb_info *info, struct fb_var_screeninfo *var) { struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; unsigned long pixclock; /* pixelclock in Hz */ unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */ unsigned int mem_type; unsigned int clock_type; unsigned int head_addr; dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n", __func__, var->xres, var->yres, var->bits_per_pixel, var->xres_virtual, var->yres_virtual); switch (par->head) { case HEAD_CRT: mem_type = SM501_MEMF_CRT; clock_type = SM501_CLOCK_V2XCLK; head_addr = SM501_DC_CRT_FB_ADDR; break; case HEAD_PANEL: mem_type = SM501_MEMF_PANEL; clock_type = SM501_CLOCK_P2XCLK; head_addr = SM501_DC_PANEL_FB_ADDR; break; default: mem_type = 0; /* stop compiler warnings */ head_addr = 0; clock_type = 0; } switch (var->bits_per_pixel) { case 8: info->fix.visual = FB_VISUAL_PSEUDOCOLOR; break; case 16: info->fix.visual = FB_VISUAL_DIRECTCOLOR; break; case 32: info->fix.visual = FB_VISUAL_TRUECOLOR; break; } /* allocate fb memory within 501 */ info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8; info->fix.smem_len = info->fix.line_length * var->yres_virtual; dev_dbg(fbi->dev, "%s: line length = %u\n", __func__, info->fix.line_length); if (sm501_alloc_mem(fbi, &par->screen, mem_type, info->fix.smem_len)) { dev_err(fbi->dev, "no memory available\n"); return -ENOMEM; } info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr; info->screen_base = fbi->fbmem + par->screen.sm_addr; info->screen_size = info->fix.smem_len; /* set start of framebuffer to the screen */ writel(par->screen.sm_addr | SM501_ADDR_FLIP, fbi->regs + head_addr); /* program CRT clock */ pixclock = sm501fb_ps_to_hz(var->pixclock); sm501pixclock = sm501_set_clock(fbi->dev->parent, clock_type, pixclock); /* update fb layer with actual clock used */ var->pixclock = sm501fb_hz_to_ps(sm501pixclock); dev_dbg(fbi->dev, "%s: pixclock(ps) = %u, pixclock(Hz) = %lu, " "sm501pixclock = %lu, error = %ld%%\n", __func__, var->pixclock, pixclock, sm501pixclock, ((pixclock - sm501pixclock)*100)/pixclock); return 0; } /* sm501fb_set_par_geometry * * set the geometry registers for specified framebuffer. */ static void sm501fb_set_par_geometry(struct fb_info *info, struct fb_var_screeninfo *var) { struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; void __iomem *base = fbi->regs; unsigned long reg; if (par->head == HEAD_CRT) base += SM501_DC_CRT_H_TOT; else base += SM501_DC_PANEL_H_TOT; /* set framebuffer width and display width */ reg = info->fix.line_length; reg |= ((var->xres * var->bits_per_pixel)/8) << 16; writel(reg, fbi->regs + (par->head == HEAD_CRT ? SM501_DC_CRT_FB_OFFSET : SM501_DC_PANEL_FB_OFFSET)); /* program horizontal total */ reg = (h_total(var) - 1) << 16; reg |= (var->xres - 1); writel(reg, base + SM501_OFF_DC_H_TOT); /* program horizontal sync */ reg = var->hsync_len << 16; reg |= var->xres + var->right_margin - 1; writel(reg, base + SM501_OFF_DC_H_SYNC); /* program vertical total */ reg = (v_total(var) - 1) << 16; reg |= (var->yres - 1); writel(reg, base + SM501_OFF_DC_V_TOT); /* program vertical sync */ reg = var->vsync_len << 16; reg |= var->yres + var->lower_margin - 1; writel(reg, base + SM501_OFF_DC_V_SYNC); } /* sm501fb_pan_crt * * pan the CRT display output within an virtual framebuffer */ static int sm501fb_pan_crt(struct fb_var_screeninfo *var, struct fb_info *info) { struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; unsigned int bytes_pixel = var->bits_per_pixel / 8; unsigned long reg; unsigned long xoffs; xoffs = var->xoffset * bytes_pixel; reg = readl(fbi->regs + SM501_DC_CRT_CONTROL); reg &= ~SM501_DC_CRT_CONTROL_PIXEL_MASK; reg |= ((xoffs & 15) / bytes_pixel) << 4; writel(reg, fbi->regs + SM501_DC_CRT_CONTROL); reg = (par->screen.sm_addr + xoffs + var->yoffset * info->fix.line_length); writel(reg | SM501_ADDR_FLIP, fbi->regs + SM501_DC_CRT_FB_ADDR); sm501fb_sync_regs(fbi); return 0; } /* sm501fb_pan_pnl * * pan the panel display output within an virtual framebuffer */ static int sm501fb_pan_pnl(struct fb_var_screeninfo *var, struct fb_info *info) { struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; unsigned long reg; reg = var->xoffset | (var->xres_virtual << 16); writel(reg, fbi->regs + SM501_DC_PANEL_FB_WIDTH); reg = var->yoffset | (var->yres_virtual << 16); writel(reg, fbi->regs + SM501_DC_PANEL_FB_HEIGHT); sm501fb_sync_regs(fbi); return 0; } /* sm501fb_set_par_crt * * Set the CRT video mode from the fb_info structure */ static int sm501fb_set_par_crt(struct fb_info *info) { struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; struct fb_var_screeninfo *var = &info->var; unsigned long control; /* control register */ int ret; /* activate new configuration */ dev_dbg(fbi->dev, "%s(%p)\n", __func__, info); /* enable CRT DAC - note 0 is on!*/ sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER); control = readl(fbi->regs + SM501_DC_CRT_CONTROL); control &= (SM501_DC_CRT_CONTROL_PIXEL_MASK | SM501_DC_CRT_CONTROL_GAMMA | SM501_DC_CRT_CONTROL_BLANK | SM501_DC_CRT_CONTROL_SEL | SM501_DC_CRT_CONTROL_CP | SM501_DC_CRT_CONTROL_TVP); /* set the sync polarities before we check data source */ if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0) control |= SM501_DC_CRT_CONTROL_HSP; if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0) control |= SM501_DC_CRT_CONTROL_VSP; if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) { /* the head is displaying panel data... */ sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0); goto out_update; } ret = sm501fb_set_par_common(info, var); if (ret) { dev_err(fbi->dev, "failed to set common parameters\n"); return ret; } sm501fb_pan_crt(var, info); sm501fb_set_par_geometry(info, var); control |= SM501_FIFO_3; /* fill if >3 free slots */ switch(var->bits_per_pixel) { case 8: control |= SM501_DC_CRT_CONTROL_8BPP; break; case 16: control |= SM501_DC_CRT_CONTROL_16BPP; break; case 32: control |= SM501_DC_CRT_CONTROL_32BPP; sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE); break; default: BUG(); } control |= SM501_DC_CRT_CONTROL_SEL; /* CRT displays CRT data */ control |= SM501_DC_CRT_CONTROL_TE; /* enable CRT timing */ control |= SM501_DC_CRT_CONTROL_ENABLE; /* enable CRT plane */ out_update: dev_dbg(fbi->dev, "new control is %08lx\n", control); writel(control, fbi->regs + SM501_DC_CRT_CONTROL); sm501fb_sync_regs(fbi); return 0; } static void sm501fb_panel_power(struct sm501fb_info *fbi, int to) { unsigned long control; void __iomem *ctrl_reg = fbi->regs + SM501_DC_PANEL_CONTROL; control = readl(ctrl_reg); if (to && (control & SM501_DC_PANEL_CONTROL_VDD) == 0) { /* enable panel power */ control |= SM501_DC_PANEL_CONTROL_VDD; /* FPVDDEN */ writel(control, ctrl_reg); sm501fb_sync_regs(fbi); mdelay(10); control |= SM501_DC_PANEL_CONTROL_DATA; /* DATA */ writel(control, ctrl_reg); sm501fb_sync_regs(fbi); mdelay(10); control |= SM501_DC_PANEL_CONTROL_BIAS; /* VBIASEN */ writel(control, ctrl_reg); sm501fb_sync_regs(fbi); mdelay(10); control |= SM501_DC_PANEL_CONTROL_FPEN; writel(control, ctrl_reg); } else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) { /* disable panel power */ control &= ~SM501_DC_PANEL_CONTROL_FPEN; writel(control, ctrl_reg); sm501fb_sync_regs(fbi); mdelay(10); control &= ~SM501_DC_PANEL_CONTROL_BIAS; writel(control, ctrl_reg); sm501fb_sync_regs(fbi); mdelay(10); control &= ~SM501_DC_PANEL_CONTROL_DATA; writel(control, ctrl_reg); sm501fb_sync_regs(fbi); mdelay(10); control &= ~SM501_DC_PANEL_CONTROL_VDD; writel(control, ctrl_reg); sm501fb_sync_regs(fbi); mdelay(10); } sm501fb_sync_regs(fbi); } /* sm501fb_set_par_pnl * * Set the panel video mode from the fb_info structure */ static int sm501fb_set_par_pnl(struct fb_info *info) { struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; struct fb_var_screeninfo *var = &info->var; unsigned long control; unsigned long reg; int ret; dev_dbg(fbi->dev, "%s(%p)\n", __func__, info); /* activate this new configuration */ ret = sm501fb_set_par_common(info, var); if (ret) return ret; sm501fb_pan_pnl(var, info); sm501fb_set_par_geometry(info, var); /* update control register */ control = readl(fbi->regs + SM501_DC_PANEL_CONTROL); control &= (SM501_DC_PANEL_CONTROL_GAMMA | SM501_DC_PANEL_CONTROL_VDD | SM501_DC_PANEL_CONTROL_DATA | SM501_DC_PANEL_CONTROL_BIAS | SM501_DC_PANEL_CONTROL_FPEN | SM501_DC_PANEL_CONTROL_CP | SM501_DC_PANEL_CONTROL_CK | SM501_DC_PANEL_CONTROL_HP | SM501_DC_PANEL_CONTROL_VP | SM501_DC_PANEL_CONTROL_HPD | SM501_DC_PANEL_CONTROL_VPD); control |= SM501_FIFO_3; /* fill if >3 free slots */ switch(var->bits_per_pixel) { case 8: control |= SM501_DC_PANEL_CONTROL_8BPP; break; case 16: control |= SM501_DC_PANEL_CONTROL_16BPP; break; case 32: control |= SM501_DC_PANEL_CONTROL_32BPP; sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE); break; default: BUG(); } writel(0x0, fbi->regs + SM501_DC_PANEL_PANNING_CONTROL); /* panel plane top left and bottom right location */ writel(0x00, fbi->regs + SM501_DC_PANEL_TL_LOC); reg = var->xres - 1; reg |= (var->yres - 1) << 16; writel(reg, fbi->regs + SM501_DC_PANEL_BR_LOC); /* program panel control register */ control |= SM501_DC_PANEL_CONTROL_TE; /* enable PANEL timing */ control |= SM501_DC_PANEL_CONTROL_EN; /* enable PANEL gfx plane */ if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0) control |= SM501_DC_PANEL_CONTROL_HSP; if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0) control |= SM501_DC_PANEL_CONTROL_VSP; writel(control, fbi->regs + SM501_DC_PANEL_CONTROL); sm501fb_sync_regs(fbi); /* ensure the panel interface is not tristated at this point */ sm501_modify_reg(fbi->dev->parent, SM501_SYSTEM_CONTROL, 0, SM501_SYSCTRL_PANEL_TRISTATE); /* power the panel up */ sm501fb_panel_power(fbi, 1); return 0; } /* chan_to_field * * convert a colour value into a field position * * from pxafb.c */ static inline unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf) { chan &= 0xffff; chan >>= 16 - bf->length; return chan << bf->offset; } /* sm501fb_setcolreg * * set the colour mapping for modes that support palettised data */ static int sm501fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *info) { struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; void __iomem *base = fbi->regs; unsigned int val; if (par->head == HEAD_CRT) base += SM501_DC_CRT_PALETTE; else base += SM501_DC_PANEL_PALETTE; switch (info->fix.visual) { case FB_VISUAL_TRUECOLOR: /* true-colour, use pseuo-palette */ if (regno < 16) { u32 *pal = par->pseudo_palette; val = chan_to_field(red, &info->var.red); val |= chan_to_field(green, &info->var.green); val |= chan_to_field(blue, &info->var.blue); pal[regno] = val; } break; case FB_VISUAL_PSEUDOCOLOR: if (regno < 256) { val = (red >> 8) << 16; val |= (green >> 8) << 8; val |= blue >> 8; writel(val, base + (regno * 4)); } break; default: return 1; /* unknown type */ } return 0; } /* sm501fb_blank_pnl * * Blank or un-blank the panel interface */ static int sm501fb_blank_pnl(int blank_mode, struct fb_info *info) { struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info); switch (blank_mode) { case FB_BLANK_POWERDOWN: sm501fb_panel_power(fbi, 0); break; case FB_BLANK_UNBLANK: sm501fb_panel_power(fbi, 1); break; case FB_BLANK_NORMAL: case FB_BLANK_VSYNC_SUSPEND: case FB_BLANK_HSYNC_SUSPEND: default: return 1; } return 0; } /* sm501fb_blank_crt * * Blank or un-blank the crt interface */ static int sm501fb_blank_crt(int blank_mode, struct fb_info *info) { struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; unsigned long ctrl; dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info); ctrl = readl(fbi->regs + SM501_DC_CRT_CONTROL); switch (blank_mode) { case FB_BLANK_POWERDOWN: ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE; sm501_misc_control(fbi->dev->parent, SM501_MISC_DAC_POWER, 0); case FB_BLANK_NORMAL: ctrl |= SM501_DC_CRT_CONTROL_BLANK; break; case FB_BLANK_UNBLANK: ctrl &= ~SM501_DC_CRT_CONTROL_BLANK; ctrl |= SM501_DC_CRT_CONTROL_ENABLE; sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER); break; case FB_BLANK_VSYNC_SUSPEND: case FB_BLANK_HSYNC_SUSPEND: default: return 1; } writel(ctrl, fbi->regs + SM501_DC_CRT_CONTROL); sm501fb_sync_regs(fbi); return 0; } /* sm501fb_cursor * * set or change the hardware cursor parameters */ static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor) { struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; void __iomem *base = fbi->regs; unsigned long hwc_addr; unsigned long fg, bg; dev_dbg(fbi->dev, "%s(%p,%p)\n", __func__, info, cursor); if (par->head == HEAD_CRT) base += SM501_DC_CRT_HWC_BASE; else base += SM501_DC_PANEL_HWC_BASE; /* check not being asked to exceed capabilities */ if (cursor->image.width > 64) return -EINVAL; if (cursor->image.height > 64) return -EINVAL; if (cursor->image.depth > 1) return -EINVAL; hwc_addr = readl(base + SM501_OFF_HWC_ADDR); if (cursor->enable) writel(hwc_addr | SM501_HWC_EN, base + SM501_OFF_HWC_ADDR); else writel(hwc_addr & ~SM501_HWC_EN, base + SM501_OFF_HWC_ADDR); /* set data */ if (cursor->set & FB_CUR_SETPOS) { unsigned int x = cursor->image.dx; unsigned int y = cursor->image.dy; if (x >= 2048 || y >= 2048 ) return -EINVAL; dev_dbg(fbi->dev, "set position %d,%d\n", x, y); //y += cursor->image.height; writel(x | (y << 16), base + SM501_OFF_HWC_LOC); } if (cursor->set & FB_CUR_SETCMAP) { unsigned int bg_col = cursor->image.bg_color; unsigned int fg_col = cursor->image.fg_color; dev_dbg(fbi->dev, "%s: update cmap (%08x,%08x)\n", __func__, bg_col, fg_col); bg = ((info->cmap.red[bg_col] & 0xF8) << 8) | ((info->cmap.green[bg_col] & 0xFC) << 3) | ((info->cmap.blue[bg_col] & 0xF8) >> 3); fg = ((info->cmap.red[fg_col] & 0xF8) << 8) | ((info->cmap.green[fg_col] & 0xFC) << 3) | ((info->cmap.blue[fg_col] & 0xF8) >> 3); dev_dbg(fbi->dev, "fgcol %08lx, bgcol %08lx\n", fg, bg); writel(bg, base + SM501_OFF_HWC_COLOR_1_2); writel(fg, base + SM501_OFF_HWC_COLOR_3); } if (cursor->set & FB_CUR_SETSIZE || cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE)) { /* SM501 cursor is a two bpp 64x64 bitmap this routine * clears it to transparent then combines the cursor * shape plane with the colour plane to set the * cursor */ int x, y; const unsigned char *pcol = cursor->image.data; const unsigned char *pmsk = cursor->mask; void __iomem *dst = par->cursor.k_addr; unsigned char dcol = 0; unsigned char dmsk = 0; unsigned int op; dev_dbg(fbi->dev, "%s: setting shape (%d,%d)\n", __func__, cursor->image.width, cursor->image.height); for (op = 0; op < (64*64*2)/8; op+=4) writel(0x0, dst + op); for (y = 0; y < cursor->image.height; y++) { for (x = 0; x < cursor->image.width; x++) { if ((x % 8) == 0) { dcol = *pcol++; dmsk = *pmsk++; } else { dcol >>= 1; dmsk >>= 1; } if (dmsk & 1) { op = (dcol & 1) ? 1 : 3; op <<= ((x % 4) * 2); op |= readb(dst + (x / 4)); writeb(op, dst + (x / 4)); } } dst += (64*2)/8; } } sm501fb_sync_regs(fbi); /* ensure cursor data flushed */ return 0; } /* sm501fb_crtsrc_show * * device attribute code to show where the crt output is sourced from */ static ssize_t sm501fb_crtsrc_show(struct device *dev, struct device_attribute *attr, char *buf) { struct sm501fb_info *info = dev_get_drvdata(dev); unsigned long ctrl; ctrl = readl(info->regs + SM501_DC_CRT_CONTROL); ctrl &= SM501_DC_CRT_CONTROL_SEL; return snprintf(buf, PAGE_SIZE, "%s\n", ctrl ? "crt" : "panel"); } /* sm501fb_crtsrc_show * * device attribute code to set where the crt output is sourced from */ static ssize_t sm501fb_crtsrc_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { struct sm501fb_info *info = dev_get_drvdata(dev); enum sm501_controller head; unsigned long ctrl; if (len < 1) return -EINVAL; if (strnicmp(buf, "crt", 3) == 0) head = HEAD_CRT; else if (strnicmp(buf, "panel", 5) == 0) head = HEAD_PANEL; else return -EINVAL; dev_info(dev, "setting crt source to head %d\n", head); ctrl = readl(info->regs + SM501_DC_CRT_CONTROL); if (head == HEAD_CRT) { ctrl |= SM501_DC_CRT_CONTROL_SEL; ctrl |= SM501_DC_CRT_CONTROL_ENABLE; ctrl |= SM501_DC_CRT_CONTROL_TE; } else { ctrl &= ~SM501_DC_CRT_CONTROL_SEL; ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE; ctrl &= ~SM501_DC_CRT_CONTROL_TE; } writel(ctrl, info->regs + SM501_DC_CRT_CONTROL); sm501fb_sync_regs(info); return len; } /* Prepare the device_attr for registration with sysfs later */ static DEVICE_ATTR(crt_src, 0666, sm501fb_crtsrc_show, sm501fb_crtsrc_store); /* sm501fb_show_regs * * show the primary sm501 registers */ static int sm501fb_show_regs(struct sm501fb_info *info, char *ptr, unsigned int start, unsigned int len) { void __iomem *mem = info->regs; char *buf = ptr; unsigned int reg; for (reg = start; reg < (len + start); reg += 4) ptr += sprintf(ptr, "%08x = %08x\n", reg, readl(mem + reg)); return ptr - buf; } /* sm501fb_debug_show_crt * * show the crt control and cursor registers */ static ssize_t sm501fb_debug_show_crt(struct device *dev, struct device_attribute *attr, char *buf) { struct sm501fb_info *info = dev_get_drvdata(dev); char *ptr = buf; ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_CONTROL, 0x40); ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_HWC_BASE, 0x10); return ptr - buf; } static DEVICE_ATTR(fbregs_crt, 0444, sm501fb_debug_show_crt, NULL); /* sm501fb_debug_show_pnl * * show the panel control and cursor registers */ static ssize_t sm501fb_debug_show_pnl(struct device *dev, struct device_attribute *attr, char *buf) { struct sm501fb_info *info = dev_get_drvdata(dev); char *ptr = buf; ptr += sm501fb_show_regs(info, ptr, 0x0, 0x40); ptr += sm501fb_show_regs(info, ptr, SM501_DC_PANEL_HWC_BASE, 0x10); return ptr - buf; } static DEVICE_ATTR(fbregs_pnl, 0444, sm501fb_debug_show_pnl, NULL); /* framebuffer ops */ static struct fb_ops sm501fb_ops_crt = { .owner = THIS_MODULE, .fb_check_var = sm501fb_check_var_crt, .fb_set_par = sm501fb_set_par_crt, .fb_blank = sm501fb_blank_crt, .fb_setcolreg = sm501fb_setcolreg, .fb_pan_display = sm501fb_pan_crt, .fb_cursor = sm501fb_cursor, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, }; static struct fb_ops sm501fb_ops_pnl = { .owner = THIS_MODULE, .fb_check_var = sm501fb_check_var_pnl, .fb_set_par = sm501fb_set_par_pnl, .fb_pan_display = sm501fb_pan_pnl, .fb_blank = sm501fb_blank_pnl, .fb_setcolreg = sm501fb_setcolreg, .fb_cursor = sm501fb_cursor, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, }; /* sm501fb_info_alloc * * creates and initialises an sm501fb_info structure */ static struct sm501fb_info *sm501fb_info_alloc(struct fb_info *fbinfo_crt, struct fb_info *fbinfo_pnl) { struct sm501fb_info *info; struct sm501fb_par *par; info = kzalloc(sizeof(struct sm501fb_info), GFP_KERNEL); if (info) { /* set the references back */ par = fbinfo_crt->par; par->info = info; par->head = HEAD_CRT; fbinfo_crt->pseudo_palette = &par->pseudo_palette; par = fbinfo_pnl->par; par->info = info; par->head = HEAD_PANEL; fbinfo_pnl->pseudo_palette = &par->pseudo_palette; /* store the two fbs into our info */ info->fb[HEAD_CRT] = fbinfo_crt; info->fb[HEAD_PANEL] = fbinfo_pnl; } return info; } /* sm501_init_cursor * * initialise hw cursor parameters */ static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base) { struct sm501fb_par *par = fbi->par; struct sm501fb_info *info = par->info; int ret; par->cursor_regs = info->regs + reg_base; ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024); if (ret < 0) return ret; /* initialise the colour registers */ writel(par->cursor.sm_addr, par->cursor_regs + SM501_OFF_HWC_ADDR); writel(0x00, par->cursor_regs + SM501_OFF_HWC_LOC); writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_1_2); writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_3); sm501fb_sync_regs(info); return 0; } /* sm501fb_info_start * * fills the par structure claiming resources and remapping etc. */ static int sm501fb_start(struct sm501fb_info *info, struct platform_device *pdev) { struct resource *res; struct device *dev; int ret; info->dev = dev = &pdev->dev; platform_set_drvdata(pdev, info); info->irq = ret = platform_get_irq(pdev, 0); if (ret < 0) { /* we currently do not use the IRQ */ dev_warn(dev, "no irq for device\n"); } /* allocate, reserve and remap resources for registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(dev, "no resource definition for registers\n"); ret = -ENOENT; goto err_release; } info->regs_res = request_mem_region(res->start, res->end - res->start, pdev->name); if (info->regs_res == NULL) { dev_err(dev, "cannot claim registers\n"); ret = -ENXIO; goto err_release; } info->regs = ioremap(res->start, (res->end - res->start)+1); if (info->regs == NULL) { dev_err(dev, "cannot remap registers\n"); ret = -ENXIO; goto err_regs_res; } /* allocate, reserve resources for framebuffer */ res = platform_get_resource(pdev, IORESOURCE_MEM, 2); if (res == NULL) { dev_err(dev, "no memory resource defined\n"); ret = -ENXIO; goto err_regs_map; } info->fbmem_res = request_mem_region(res->start, (res->end - res->start)+1, pdev->name); if (info->fbmem_res == NULL) { dev_err(dev, "cannot claim framebuffer\n"); ret = -ENXIO; goto err_regs_map; } info->fbmem = ioremap(res->start, (res->end - res->start)+1); if (info->fbmem == NULL) { dev_err(dev, "cannot remap framebuffer\n"); goto err_mem_res; } info->fbmem_len = (res->end - res->start)+1; /* enable display controller */ sm501_unit_power(dev->parent, SM501_GATE_DISPLAY, 1); /* setup cursors */ sm501_init_cursor(info->fb[HEAD_CRT], SM501_DC_CRT_HWC_ADDR); sm501_init_cursor(info->fb[HEAD_PANEL], SM501_DC_PANEL_HWC_ADDR); return 0; /* everything is setup */ err_mem_res: release_resource(info->fbmem_res); kfree(info->fbmem_res); err_regs_map: iounmap(info->regs); err_regs_res: release_resource(info->regs_res); kfree(info->regs_res); err_release: return ret; } static void sm501fb_stop(struct sm501fb_info *info) { /* disable display controller */ sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0); iounmap(info->fbmem); release_resource(info->fbmem_res); kfree(info->fbmem_res); iounmap(info->regs); release_resource(info->regs_res); kfree(info->regs_res); } static void sm501fb_info_release(struct sm501fb_info *info) { kfree(info); } static int sm501fb_init_fb(struct fb_info *fb, enum sm501_controller head, const char *fbname) { struct sm501_platdata_fbsub *pd; struct sm501fb_par *par = fb->par; struct sm501fb_info *info = par->info; unsigned long ctrl; unsigned int enable; int ret; switch (head) { case HEAD_CRT: pd = info->pdata->fb_crt; ctrl = readl(info->regs + SM501_DC_CRT_CONTROL); enable = (ctrl & SM501_DC_CRT_CONTROL_ENABLE) ? 1 : 0; /* ensure we set the correct source register */ if (info->pdata->fb_route != SM501_FB_CRT_PANEL) { ctrl |= SM501_DC_CRT_CONTROL_SEL; writel(ctrl, info->regs + SM501_DC_CRT_CONTROL); } break; case HEAD_PANEL: pd = info->pdata->fb_pnl; ctrl = readl(info->regs + SM501_DC_PANEL_CONTROL); enable = (ctrl & SM501_DC_PANEL_CONTROL_EN) ? 1 : 0; break; default: pd = NULL; /* stop compiler warnings */ ctrl = 0; enable = 0; BUG(); } dev_info(info->dev, "fb %s %sabled at start\n", fbname, enable ? "en" : "dis"); /* check to see if our routing allows this */ if (head == HEAD_CRT && info->pdata->fb_route == SM501_FB_CRT_PANEL) { ctrl &= ~SM501_DC_CRT_CONTROL_SEL; writel(ctrl, info->regs + SM501_DC_CRT_CONTROL); enable = 0; } strlcpy(fb->fix.id, fbname, sizeof(fb->fix.id)); memcpy(&par->ops, (head == HEAD_CRT) ? &sm501fb_ops_crt : &sm501fb_ops_pnl, sizeof(struct fb_ops)); /* update ops dependant on what we've been passed */ if ((pd->flags & SM501FB_FLAG_USE_HWCURSOR) == 0) par->ops.fb_cursor = NULL; fb->fbops = &par->ops; fb->flags = FBINFO_FLAG_DEFAULT | FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN; /* fixed data */ fb->fix.type = FB_TYPE_PACKED_PIXELS; fb->fix.type_aux = 0; fb->fix.xpanstep = 1; fb->fix.ypanstep = 1; fb->fix.ywrapstep = 0; fb->fix.accel = FB_ACCEL_NONE; /* screenmode */ fb->var.nonstd = 0; fb->var.activate = FB_ACTIVATE_NOW; fb->var.accel_flags = 0; fb->var.vmode = FB_VMODE_NONINTERLACED; fb->var.bits_per_pixel = 16; if (enable && (pd->flags & SM501FB_FLAG_USE_INIT_MODE) && 0) { /* TODO read the mode from the current display */ } else { if (pd->def_mode) { dev_info(info->dev, "using supplied mode\n"); fb_videomode_to_var(&fb->var, pd->def_mode); fb->var.bits_per_pixel = pd->def_bpp ? pd->def_bpp : 8; fb->var.xres_virtual = fb->var.xres; fb->var.yres_virtual = fb->var.yres; } else { ret = fb_find_mode(&fb->var, fb, NULL, NULL, 0, NULL, 8); if (ret == 0 || ret == 4) { dev_err(info->dev, "failed to get initial mode\n"); return -EINVAL; } } } /* initialise and set the palette */ fb_alloc_cmap(&fb->cmap, NR_PALETTE, 0); fb_set_cmap(&fb->cmap, fb); ret = (fb->fbops->fb_check_var)(&fb->var, fb); if (ret) dev_err(info->dev, "check_var() failed on initial setup?\n"); /* ensure we've activated our new configuration */ (fb->fbops->fb_set_par)(fb); return 0; } /* default platform data if none is supplied (ie, PCI device) */ static struct sm501_platdata_fbsub sm501fb_pdata_crt = { .flags = (SM501FB_FLAG_USE_INIT_MODE | SM501FB_FLAG_USE_HWCURSOR | SM501FB_FLAG_USE_HWACCEL | SM501FB_FLAG_DISABLE_AT_EXIT), }; static struct sm501_platdata_fbsub sm501fb_pdata_pnl = { .flags = (SM501FB_FLAG_USE_INIT_MODE | SM501FB_FLAG_USE_HWCURSOR | SM501FB_FLAG_USE_HWACCEL | SM501FB_FLAG_DISABLE_AT_EXIT), }; static struct sm501_platdata_fb sm501fb_def_pdata = { .fb_route = SM501_FB_OWN, .fb_crt = &sm501fb_pdata_crt, .fb_pnl = &sm501fb_pdata_pnl, }; static char driver_name_crt[] = "sm501fb-crt"; static char driver_name_pnl[] = "sm501fb-panel"; static int __init sm501fb_probe(struct platform_device *pdev) { struct sm501fb_info *info; struct device *dev = &pdev->dev; struct fb_info *fbinfo_crt; struct fb_info *fbinfo_pnl; int ret; /* allocate our framebuffers */ fbinfo_crt = framebuffer_alloc(sizeof(struct sm501fb_par), dev); if (fbinfo_crt == NULL) { dev_err(dev, "cannot allocate crt framebuffer\n"); return -ENOMEM; } fbinfo_pnl = framebuffer_alloc(sizeof(struct sm501fb_par), dev); if (fbinfo_pnl == NULL) { dev_err(dev, "cannot allocate panel framebuffer\n"); ret = -ENOMEM; goto fbinfo_crt_alloc_fail; } info = sm501fb_info_alloc(fbinfo_crt, fbinfo_pnl); if (info == NULL) { dev_err(dev, "cannot allocate par\n"); ret = -ENOMEM; goto sm501fb_alloc_fail; } if (dev->parent->platform_data) { struct sm501_platdata *pd = dev->parent->platform_data; info->pdata = pd->fb; } if (info->pdata == NULL) { dev_info(dev, "using default configuration data\n"); info->pdata = &sm501fb_def_pdata; } /* start the framebuffers */ ret = sm501fb_start(info, pdev); if (ret) { dev_err(dev, "cannot initialise SM501\n"); goto sm501fb_start_fail; } /* CRT framebuffer setup */ ret = sm501fb_init_fb(fbinfo_crt, HEAD_CRT, driver_name_crt); if (ret) { dev_err(dev, "cannot initialise CRT fb\n"); goto sm501fb_start_fail; } /* Panel framebuffer setup */ ret = sm501fb_init_fb(fbinfo_pnl, HEAD_PANEL, driver_name_pnl); if (ret) { dev_err(dev, "cannot initialise Panel fb\n"); goto sm501fb_start_fail; } /* register framebuffers */ ret = register_framebuffer(fbinfo_crt); if (ret < 0) { dev_err(dev, "failed to register CRT fb (%d)\n", ret); goto register_crt_fail; } ret = register_framebuffer(fbinfo_pnl); if (ret < 0) { dev_err(dev, "failed to register panel fb (%d)\n", ret); goto register_pnl_fail; } dev_info(dev, "fb%d: %s frame buffer device\n", fbinfo_crt->node, fbinfo_crt->fix.id); dev_info(dev, "fb%d: %s frame buffer device\n", fbinfo_pnl->node, fbinfo_pnl->fix.id); /* create device files */ ret = device_create_file(dev, &dev_attr_crt_src); if (ret) goto crtsrc_fail; ret = device_create_file(dev, &dev_attr_fbregs_pnl); if (ret) goto fbregs_pnl_fail; ret = device_create_file(dev, &dev_attr_fbregs_crt); if (ret) goto fbregs_crt_fail; /* we registered, return ok */ return 0; fbregs_crt_fail: device_remove_file(dev, &dev_attr_fbregs_pnl); fbregs_pnl_fail: device_remove_file(dev, &dev_attr_crt_src); crtsrc_fail: unregister_framebuffer(fbinfo_pnl); register_pnl_fail: unregister_framebuffer(fbinfo_crt); register_crt_fail: sm501fb_stop(info); sm501fb_start_fail: sm501fb_info_release(info); sm501fb_alloc_fail: framebuffer_release(fbinfo_pnl); fbinfo_crt_alloc_fail: framebuffer_release(fbinfo_crt); return ret; } /* * Cleanup */ static int sm501fb_remove(struct platform_device *pdev) { struct sm501fb_info *info = platform_get_drvdata(pdev); struct fb_info *fbinfo_crt = info->fb[0]; struct fb_info *fbinfo_pnl = info->fb[1]; device_remove_file(&pdev->dev, &dev_attr_fbregs_crt); device_remove_file(&pdev->dev, &dev_attr_fbregs_pnl); device_remove_file(&pdev->dev, &dev_attr_crt_src); unregister_framebuffer(fbinfo_crt); unregister_framebuffer(fbinfo_pnl); sm501fb_stop(info); sm501fb_info_release(info); framebuffer_release(fbinfo_pnl); framebuffer_release(fbinfo_crt); return 0; } #ifdef CONFIG_PM static int sm501fb_suspend_fb(struct sm501fb_info *info, enum sm501_controller head) { struct fb_info *fbi = info->fb[head]; struct sm501fb_par *par = fbi->par; if (par->screen.size == 0) return 0; /* backup copies in case chip is powered down over suspend */ par->store_fb = vmalloc(par->screen.size); if (par->store_fb == NULL) { dev_err(info->dev, "no memory to store screen\n"); return -ENOMEM; } par->store_cursor = vmalloc(par->cursor.size); if (par->store_cursor == NULL) { dev_err(info->dev, "no memory to store cursor\n"); goto err_nocursor; } dev_dbg(info->dev, "suspending screen to %p\n", par->store_fb); dev_dbg(info->dev, "suspending cursor to %p\n", par->store_cursor); memcpy_fromio(par->store_fb, par->screen.k_addr, par->screen.size); memcpy_fromio(par->store_cursor, par->cursor.k_addr, par->cursor.size); /* blank the relevant interface to ensure unit power minimised */ (par->ops.fb_blank)(FB_BLANK_POWERDOWN, fbi); acquire_console_sem(); fb_set_suspend(fbi, 1); release_console_sem(); return 0; err_nocursor: vfree(par->store_fb); par->store_fb = NULL; return -ENOMEM; } static void sm501fb_resume_fb(struct sm501fb_info *info, enum sm501_controller head) { struct fb_info *fbi = info->fb[head]; struct sm501fb_par *par = fbi->par; if (par->screen.size == 0) return; /* re-activate the configuration */ (par->ops.fb_set_par)(fbi); /* restore the data */ dev_dbg(info->dev, "restoring screen from %p\n", par->store_fb); dev_dbg(info->dev, "restoring cursor from %p\n", par->store_cursor); if (par->store_fb) memcpy_toio(par->screen.k_addr, par->store_fb, par->screen.size); if (par->store_cursor) memcpy_toio(par->cursor.k_addr, par->store_cursor, par->cursor.size); acquire_console_sem(); fb_set_suspend(fbi, 0); release_console_sem(); vfree(par->store_fb); vfree(par->store_cursor); } /* suspend and resume support */ static int sm501fb_suspend(struct platform_device *pdev, pm_message_t state) { struct sm501fb_info *info = platform_get_drvdata(pdev); /* store crt control to resume with */ info->pm_crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL); sm501fb_suspend_fb(info, HEAD_CRT); sm501fb_suspend_fb(info, HEAD_PANEL); /* turn off the clocks, in case the device is not powered down */ sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0); return 0; } #define SM501_CRT_CTRL_SAVE (SM501_DC_CRT_CONTROL_TVP | \ SM501_DC_CRT_CONTROL_SEL) static int sm501fb_resume(struct platform_device *pdev) { struct sm501fb_info *info = platform_get_drvdata(pdev); unsigned long crt_ctrl; sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 1); /* restore the items we want to be saved for crt control */ crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL); crt_ctrl &= ~SM501_CRT_CTRL_SAVE; crt_ctrl |= info->pm_crt_ctrl & SM501_CRT_CTRL_SAVE; writel(crt_ctrl, info->regs + SM501_DC_CRT_CONTROL); sm501fb_resume_fb(info, HEAD_CRT); sm501fb_resume_fb(info, HEAD_PANEL); return 0; } #else #define sm501fb_suspend NULL #define sm501fb_resume NULL #endif static struct platform_driver sm501fb_driver = { .probe = sm501fb_probe, .remove = sm501fb_remove, .suspend = sm501fb_suspend, .resume = sm501fb_resume, .driver = { .name = "sm501-fb", .owner = THIS_MODULE, }, }; static int __devinit sm501fb_init(void) { return platform_driver_register(&sm501fb_driver); } static void __exit sm501fb_cleanup(void) { platform_driver_unregister(&sm501fb_driver); } module_init(sm501fb_init); module_exit(sm501fb_cleanup); MODULE_AUTHOR("Ben Dooks, Vincent Sanders"); MODULE_DESCRIPTION("SM501 Framebuffer driver"); MODULE_LICENSE("GPL v2");