/****************************************************************************/ /* * mcfmbus.h -- Coldfire MBUS support defines. * * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) */ /****************************************************************************/ #ifndef mcfmbus_h #define mcfmbus_h #include <linux/config.h> #define MCFMBUS_BASE 0x280 #define MCFMBUS_IRQ_VECTOR 0x19 #define MCFMBUS_IRQ 0x1 #define MCFMBUS_CLK 0x3f #define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/ #define MCFMBUS_ADDRESS 0x01 /* * Define the 5307 MBUS register set addresses */ #define MCFMBUS_MADR 0x00 #define MCFMBUS_MFDR 0x04 #define MCFMBUS_MBCR 0x08 #define MCFMBUS_MBSR 0x0C #define MCFMBUS_MBDR 0x10 #define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/ #define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ /* * Define bit flags in Controll Register */ #define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ #define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */ #define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */ #define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */ #define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */ #define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */ /* * Define bit flags in Status Register */ #define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */ #define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */ #define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */ #define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */ #define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */ #define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */ #define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */ /* * Define bit flags in DATA I/O Register */ #define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */ #define MBUSIOCSCLOCK 1 #define MBUSIOCGCLOCK 2 #define MBUSIOCSADDR 3 #define MBUSIOCGADDR 4 #define MBUSIOCSSLADDR 5 #define MBUSIOCGSLADDR 6 #define MBUSIOCSSUBADDR 7 #define MBUSIOCGSUBADDR 8 #endif