/* * Generic watchdog defines. Derived from.. * * Berkshire PC Watchdog Defines * by Ken Hollis <khollis@bitgate.com> * */ #ifndef _LINUX_WATCHDOG_H #define _LINUX_WATCHDOG_H #include <linux/ioctl.h> #include <linux/types.h> #define WATCHDOG_IOCTL_BASE 'W' struct watchdog_info { __u32 options; /* Options the card/driver supports */ __u32 firmware_version; /* Firmware version of the card */ __u8 identity[32]; /* Identity of the board */ }; #define WDIOC_GETSUPPORT _IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info) #define WDIOC_GETSTATUS _IOR(WATCHDOG_IOCTL_BASE, 1, int) #define WDIOC_GETBOOTSTATUS _IOR(WATCHDOG_IOCTL_BASE, 2, int) #define WDIOC_GETTEMP _IOR(WATCHDOG_IOCTL_BASE, 3, int) #define WDIOC_SETOPTIONS _IOR(WATCHDOG_IOCTL_BASE, 4, int) #define WDIOC_KEEPALIVE _IOR(WATCHDOG_IOCTL_BASE, 5, int) #define WDIOC_SETTIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 6, int) #define WDIOC_GETTIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 7, int) #define WDIOF_UNKNOWN -1 /* Unknown flag error */ #define WDIOS_UNKNOWN -1 /* Unknown status error */ #define WDIOF_OVERHEAT 0x0001 /* Reset due to CPU overheat */ #define WDIOF_FANFAULT 0x0002 /* Fan failed */ #define WDIOF_EXTERN1 0x0004 /* External relay 1 */ #define WDIOF_EXTERN2 0x0008 /* External relay 2 */ #define WDIOF_POWERUNDER 0x0010 /* Power bad/power fault */ #define WDIOF_CARDRESET 0x0020 /* Card previously reset the CPU */ #define WDIOF_POWEROVER 0x0040 /* Power over voltage */ #define WDIOF_SETTIMEOUT 0x0080 /* Set timeout (in seconds) */ #define WDIOF_MAGICCLOSE 0x0100 /* Supports magic close char */ #define WDIOF_KEEPALIVEPING 0x8000 /* Keep alive ping reply */ #define WDIOS_DISABLECARD 0x0001 /* Turn off the watchdog timer */ #define WDIOS_ENABLECARD 0x0002 /* Turn on the watchdog timer */ #define WDIOS_TEMPPANIC 0x0004 /* Kernel panic on temperature trip */ #ifdef __KERNEL__ #ifdef CONFIG_WATCHDOG_NOWAYOUT #define WATCHDOG_NOWAYOUT 1 #else #define WATCHDOG_NOWAYOUT 0 #endif #endif /* __KERNEL__ */ #endif /* ifndef _LINUX_WATCHDOG_H */