# # IP configuration # config IP_MULTICAST bool "IP: multicasting" help This is code for addressing several networked computers at once, enlarging your kernel by about 2 KB. You need multicasting if you intend to participate in the MBONE, a high bandwidth network on top of the Internet which carries audio and video broadcasts. More information about the MBONE is on the WWW at . Information about the multicast capabilities of the various network cards is contained in . For most people, it's safe to say N. config IP_ADVANCED_ROUTER bool "IP: advanced router" ---help--- If you intend to run your Linux box mostly as a router, i.e. as a computer that forwards and redistributes network packets, say Y; you will then be presented with several options that allow more precise control about the routing process. The answer to this question won't directly affect the kernel: answering N will just cause the configurator to skip all the questions about advanced routing. Note that your box can only act as a router if you enable IP forwarding in your kernel; you can do that by saying Y to "/proc file system support" and "Sysctl support" below and executing the line echo "1" > /proc/sys/net/ipv4/ip_forward at boot time after the /proc file system has been mounted. If you turn on IP forwarding, you will also get the rp_filter, which automatically rejects incoming packets if the routing table entry for their source address doesn't match the network interface they're arriving on. This has security advantages because it prevents the so-called IP spoofing, however it can pose problems if you use asymmetric routing (packets from you to a host take a different path than packets from that host to you) or if you operate a non-routing host which has several IP addresses on different interfaces. To turn rp_filter on use: echo 1 > /proc/sys/net/ipv4/conf//rp_filter or echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter If unsure, say N here. choice prompt "Choose IP: FIB lookup algorithm (choose FIB_HASH if unsure)" depends on IP_ADVANCED_ROUTER default ASK_IP_FIB_HASH config ASK_IP_FIB_HASH bool "FIB_HASH" ---help--- Current FIB is very proven and good enough for most users. config IP_FIB_TRIE bool "FIB_TRIE" ---help--- Use new experimental LC-trie as FIB lookup algorithm. This improves lookup performance if you have a large number of routes. LC-trie is a longest matching prefix lookup algorithm which performs better than FIB_HASH for large routing tables. But, it consumes more memory and is more complex. LC-trie is described in: IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson IEEE Journal on Selected Areas in Communications, 17(6):1083-1092, June 1999 An experimental study of compression methods for dynamic tries Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ endchoice config IP_FIB_HASH def_bool ASK_IP_FIB_HASH || !IP_ADVANCED_ROUTER config IP_MULTIPLE_TABLES bool "IP: policy routing" depends on IP_ADVANCED_ROUTER select FIB_RULES ---help--- Normally, a router decides what to do with a received packet based solely on the packet's final destination address. If you say Y here, the Linux router will also be able to take the packet's source address into account. Furthermore, the TOS (Type-Of-Service) field of the packet can be used for routing decisions as well. If you are interested in this, please see the preliminary documentation at and . You will need supporting software from . If unsure, say N. config IP_ROUTE_MULTIPATH bool "IP: equal cost multipath" depends on IP_ADVANCED_ROUTER help Normally, the routing tables specify a single action to be taken in a deterministic manner for a given packet. If you say Y here however, it becomes possible to attach several actions to a packet pattern, in effect specifying several alternative paths to travel for those packets. The router considers all these paths to be of equal "cost" and chooses one of them in a non-deterministic fashion if a matching packet arrives. config IP_ROUTE_VERBOSE bool "IP: verbose route monitoring" depends on IP_ADVANCED_ROUTER help If you say Y here, which is recommended, then the kernel will print verbose messages regarding the routing, for example warnings about received packets which look strange and could be evidence of an attack or a misconfigured system somewhere. The information is handled by the klogd daemon which is responsible for kernel messages ("man klogd"). config IP_PNP bool "IP: kernel level autoconfiguration" help This enables automatic configuration of IP addresses of devices and of the routing table during kernel boot, based on either information supplied on the kernel command line or by BOOTP or RARP protocols. You need to say Y only for diskless machines requiring network access to boot (in which case you want to say Y to "Root file system on NFS" as well), because all other machines configure the network in their startup scripts. config IP_PNP_DHCP bool "IP: DHCP support" depends on IP_PNP ---help--- If you want your Linux box to mount its whole root file system (the one containing the directory /) from some other computer over the net via NFS and you want the IP address of your computer to be discovered automatically at boot time using the DHCP protocol (a special protocol designed for doing this job), say Y here. In case the boot ROM of your network card was designed for booting Linux and does DHCP itself, providing all necessary information on the kernel command line, you can say N here. If unsure, say Y. Note that if you want to use DHCP, a DHCP server must be operating on your network. Read for details. config IP_PNP_BOOTP bool "IP: BOOTP support" depends on IP_PNP ---help--- If you want your Linux box to mount its whole root file system (the one containing the directory /) from some other computer over the net via NFS and you want the IP address of your computer to be discovered automatically at boot time using the BOOTP protocol (a special protocol designed for doing this job), say Y here. In case the boot ROM of your network card was designed for booting Linux and does BOOTP itself, providing all necessary information on the kernel command line, you can say N here. If unsure, say Y. Note that if you want to use BOOTP, a BOOTP server must be operating on your network. Read for details. config IP_PNP_RARP bool "IP: RARP support" depends on IP_PNP help If you want your Linux box to mount its whole root file system (the one containing the directory /) from some other computer over the net via NFS and you want the IP address of your computer to be discovered automatically at boot time using the RARP protocol (an older protocol which is being obsoleted by BOOTP and DHCP), say Y here. Note that if you want to use RARP, a RARP server must be operating on your network. Read for details. # not yet ready.. # bool ' IP: ARP support' CONFIG_IP_PNP_ARP config NET_IPIP tristate "IP: tunneling" select INET_TUNNEL ---help--- Tunneling means encapsulating data of one protocol type within another protocol and sending it over a channel that understands the encapsulating protocol. This particular tunneling driver implements encapsulation of IP within IP, which sounds kind of pointless, but can be useful if you want to make your (or some other) machine appear on a different network than it physically is, or to use mobile-IP facilities (allowing laptops to seamlessly move between networks without changing their IP addresses). Saying Y to this option will produce two modules ( = code which can be inserted in and removed from the running kernel whenever you want). Most people won't need this and can say N. config NET_IPGRE tristate "IP: GRE tunnels over IP" help Tunneling means encapsulating data of one protocol type within another protocol and sending it over a channel that understands the encapsulating protocol. This particular tunneling driver implements GRE (Generic Routing Encapsulation) and at this time allows encapsulating of IPv4 or IPv6 over existing IPv4 infrastructure. This driver is useful if the other endpoint is a Cisco router: Cisco likes GRE much better than the other Linux tunneling driver ("IP tunneling" above). In addition, GRE allows multicast redistribution through the tunnel. config NET_IPGRE_BROADCAST bool "IP: broadcast GRE over IP" depends on IP_MULTICAST && NET_IPGRE help One application of GRE/IP is to construct a broadcast WAN (Wide Area Network), which looks like a normal Ethernet LAN (Local Area Network), but can be distributed all over the Internet. If you want to do that, say Y here and to "IP multicast routing" below. config IP_MROUTE bool "IP: multicast routing" depends on IP_MULTICAST help This is used if you want your machine to act as a router for IP packets that have several destination addresses. It is needed on the MBONE, a high bandwidth network on top of the Internet which carries audio and video broadcasts. In order to do that, you would most likely run the program mrouted. Information about the multicast capabilities of the various network cards is contained in . If you haven't heard about it, you don't need it. config IP_PIMSM_V1 bool "IP: PIM-SM version 1 support" depends on IP_MROUTE help Kernel side support for Sparse Mode PIM (Protocol Independent Multicast) version 1. This multicast routing protocol is used widely because Cisco supports it. You need special software to use it (pimd-v1). Please see for more information about PIM. Say Y if you want to use PIM-SM v1. Note that you can say N here if you just want to use Dense Mode PIM. config IP_PIMSM_V2 bool "IP: PIM-SM version 2 support" depends on IP_MROUTE help Kernel side support for Sparse Mode PIM version 2. In order to use this, you need an experimental routing daemon supporting it (pimd or gated-5). This routing protocol is not used widely, so say N unless you want to play with it. config ARPD bool "IP: ARP daemon support (EXPERIMENTAL)" depends on EXPERIMENTAL ---help--- Normally, the kernel maintains an internal cache which maps IP addresses to hardware addresses on the local network, so that Ethernet/Token Ring/ etc. frames are sent to the proper address on the physical networking layer. For small networks having a few hundred directly connected hosts or less, keeping this address resolution (ARP) cache inside the kernel works well. However, maintaining an internal ARP cache does not work well for very large switched networks, and will use a lot of kernel memory if TCP/IP connections are made to many machines on the network. If you say Y here, the kernel's internal ARP cache will never grow to more than 256 entries (the oldest entries are expired in a LIFO manner) and communication will be attempted with the user space ARP daemon arpd. Arpd then answers the address resolution request either from its own cache or by asking the net. This code is experimental and also obsolete. If you want to use it, you need to find a version of the daemon arpd on the net somewhere, and you should also say Y to "Kernel/User network link driver", below. If unsure, say N. config SYN_COOKIES bool "IP: TCP syncookie support (disabled per default)" ---help--- Normal TCP/IP networking is open to an attack known as "SYN flooding". This denial-of-service attack prevents legitimate remote users from being able to connect to your computer during an ongoing attack and requires very little work from the attacker, who can operate from anywhere on the Internet. SYN cookies provide protection against this type of attack. If you say Y here, the TCP/IP stack will use a cryptographic challenge protocol known as "SYN cookies" to enable legitimate users to continue to connect, even when your machine is under attack. There is no need for the legitimate users to change their TCP/IP software; SYN cookies work transparently to them. For technical information about SYN cookies, check out . If you are SYN flooded, the source address reported by the kernel is likely to have been forged by the attacker; it is only reported as an aid in tracing the packets to their actual source and should not be taken as absolute truth. SYN cookies may prevent correct error reporting on clients when the server is really overloaded. If this happens frequently better turn them off. If you say Y here, note that SYN cookies aren't enabled by default; you can enable them by saying Y to "/proc file system support" and "Sysctl support" below and executing the command echo 1 >/proc/sys/net/ipv4/tcp_syncookies at boot time after the /proc file system has been mounted. If unsure, say N. config INET_AH tristate "IP: AH transformation" select XFRM select CRYPTO select CRYPTO_HMAC select CRYPTO_MD5 select CRYPTO_SHA1 ---help--- Support for IPsec AH. If unsure, say Y. config INET_ESP tristate "IP: ESP transformation" select XFRM select CRYPTO select CRYPTO_HMAC select CRYPTO_MD5 select CRYPTO_CBC select CRYPTO_SHA1 select CRYPTO_DES ---help--- Support for IPsec ESP. If unsure, say Y. config INET_IPCOMP tristate "IP: IPComp transformation" select XFRM select INET_XFRM_TUNNEL select CRYPTO select CRYPTO_DEFLATE ---help--- Support for IP Payload Compression Protocol (IPComp) (RFC3173), typically needed for IPsec. If unsure, say Y. config INET_XFRM_TUNNEL tristate select INET_TUNNEL default n config INET_TUNNEL tristate default n config INET_XFRM_MODE_TRANSPORT tristate "IP: IPsec transport mode" default y select XFRM ---help--- Support for IPsec transport mode. If unsure, say Y. config INET_XFRM_MODE_TUNNEL tristate "IP: IPsec tunnel mode" default y select XFRM ---help--- Support for IPsec tunnel mode. If unsure, say Y. config INET_XFRM_MODE_BEET tristate "IP: IPsec BEET mode" default y select XFRM ---help--- Support for IPsec BEET mode. If unsure, say Y. config INET_DIAG tristate "INET: socket monitoring interface" default y ---help--- Support for INET (TCP, DCCP, etc) socket monitoring interface used by native Linux tools such as ss. ss is included in iproute2, currently downloadable at . If unsure, say Y. config INET_TCP_DIAG depends on INET_DIAG def_tristate INET_DIAG menuconfig TCP_CONG_ADVANCED bool "TCP: advanced congestion control" ---help--- Support for selection of various TCP congestion control modules. Nearly all users can safely say no here, and a safe default selection will be made (CUBIC with new Reno as a fallback). If unsure, say N. if TCP_CONG_ADVANCED config TCP_CONG_BIC tristate "Binary Increase Congestion (BIC) control" default m ---help--- BIC-TCP is a sender-side only change that ensures a linear RTT fairness under large windows while offering both scalability and bounded TCP-friendliness. The protocol combines two schemes called additive increase and binary search increase. When the congestion window is large, additive increase with a large increment ensures linear RTT fairness as well as good scalability. Under small congestion windows, binary search increase provides TCP friendliness. See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/ config TCP_CONG_CUBIC tristate "CUBIC TCP" default y ---help--- This is version 2.0 of BIC-TCP which uses a cubic growth function among other techniques. See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdf config TCP_CONG_WESTWOOD tristate "TCP Westwood+" default m ---help--- TCP Westwood+ is a sender-side only modification of the TCP Reno protocol stack that optimizes the performance of TCP congestion control. It is based on end-to-end bandwidth estimation to set congestion window and slow start threshold after a congestion episode. Using this estimation, TCP Westwood+ adaptively sets a slow start threshold and a congestion window which takes into account the bandwidth used at the time congestion is experienced. TCP Westwood+ significantly increases fairness wrt TCP Reno in wired networks and throughput over wireless links. config TCP_CONG_HTCP tristate "H-TCP" default m ---help--- H-TCP is a send-side only modifications of the TCP Reno protocol stack that optimizes the performance of TCP congestion control for high speed network links. It uses a modeswitch to change the alpha and beta parameters of TCP Reno based on network conditions and in a way so as to be fair with other Reno and H-TCP flows. config TCP_CONG_HSTCP tristate "High Speed TCP" depends on EXPERIMENTAL default n ---help--- Sally Floyd's High Speed TCP (RFC 3649) congestion control. A modification to TCP's congestion control mechanism for use with large congestion windows. A table indicates how much to increase the congestion window by when an ACK is received. For more detail see http://www.icir.org/floyd/hstcp.html config TCP_CONG_HYBLA tristate "TCP-Hybla congestion control algorithm" depends on EXPERIMENTAL default n ---help--- TCP-Hybla is a sender-side only change that eliminates penalization of long-RTT, large-bandwidth connections, like when satellite legs are involved, especially when sharing a common bottleneck with normal terrestrial connections. config TCP_CONG_VEGAS tristate "TCP Vegas" depends on EXPERIMENTAL default n ---help--- TCP Vegas is a sender-side only change to TCP that anticipates the onset of congestion by estimating the bandwidth. TCP Vegas adjusts the sending rate by modifying the congestion window. TCP Vegas should provide less packet loss, but it is not as aggressive as TCP Reno. config TCP_CONG_SCALABLE tristate "Scalable TCP" depends on EXPERIMENTAL default n ---help--- Scalable TCP is a sender-side only change to TCP which uses a MIMD congestion control algorithm which has some nice scaling properties, though is known to have fairness issues. See http://www.deneholme.net/tom/scalable/ config TCP_CONG_LP tristate "TCP Low Priority" depends on EXPERIMENTAL default n ---help--- TCP Low Priority (TCP-LP), a distributed algorithm whose goal is to utilize only the excess network bandwidth as compared to the ``fair share`` of bandwidth as targeted by TCP. See http://www-ece.rice.edu/networks/TCP-LP/ config TCP_CONG_VENO tristate "TCP Veno" depends on EXPERIMENTAL default n ---help--- TCP Veno is a sender-side only enhancement of TCP to obtain better throughput over wireless networks. TCP Veno makes use of state distinguishing to circumvent the difficult judgment of the packet loss type. TCP Veno cuts down less congestion window in response to random loss packets. See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf config TCP_CONG_YEAH tristate "YeAH TCP" depends on EXPERIMENTAL select TCP_CONG_VEGAS default n ---help--- YeAH-TCP is a sender-side high-speed enabled TCP congestion control algorithm, which uses a mixed loss/delay approach to compute the congestion window. It's design goals target high efficiency, internal, RTT and Reno fairness, resilience to link loss while keeping network elements load as low as possible. For further details look here: http://wil.cs.caltech.edu/pfldnet2007/paper/YeAH_TCP.pdf config TCP_CONG_ILLINOIS tristate "TCP Illinois" depends on EXPERIMENTAL default n ---help--- TCP-Illinois is a sender-side modificatio of TCP Reno for high speed long delay links. It uses round-trip-time to adjust the alpha and beta parameters to achieve a higher average throughput and maintain fairness. For further details see: http://www.ews.uiuc.edu/~shaoliu/tcpillinois/index.html choice prompt "Default TCP congestion control" default DEFAULT_CUBIC help Select the TCP congestion control that will be used by default for all connections. config DEFAULT_BIC bool "Bic" if TCP_CONG_BIC=y config DEFAULT_CUBIC bool "Cubic" if TCP_CONG_CUBIC=y config DEFAULT_HTCP bool "Htcp" if TCP_CONG_HTCP=y config DEFAULT_VEGAS bool "Vegas" if TCP_CONG_VEGAS=y config DEFAULT_WESTWOOD bool "Westwood" if TCP_CONG_WESTWOOD=y config DEFAULT_RENO bool "Reno" endchoice endif config TCP_CONG_CUBIC tristate depends on !TCP_CONG_ADVANCED default y config DEFAULT_TCP_CONG string default "bic" if DEFAULT_BIC default "cubic" if DEFAULT_CUBIC default "htcp" if DEFAULT_HTCP default "vegas" if DEFAULT_VEGAS default "westwood" if DEFAULT_WESTWOOD default "reno" if DEFAULT_RENO default "cubic" config TCP_MD5SIG bool "TCP: MD5 Signature Option support (RFC2385) (EXPERIMENTAL)" depends on EXPERIMENTAL select CRYPTO select CRYPTO_MD5 ---help--- RFC2385 specifies a method of giving MD5 protection to TCP sessions. Its main (only?) use is to protect BGP sessions between core routers on the Internet. If unsure, say N. source "net/ipv4/ipvs/Kconfig"