1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
|
/* Low-level parallel port routines for Archimedes onboard hardware
*
* Author: Phil Blundell <philb@gnu.org>
*/
/* This driver is for the parallel port hardware found on Acorn's old
* range of Archimedes machines. The A5000 and newer systems have PC-style
* I/O hardware and should use the parport_pc driver instead.
*
* The Acorn printer port hardware is very simple. There is a single 8-bit
* write-only latch for the data port and control/status bits are handled
* with various auxilliary input and output lines. The port is not
* bidirectional, does not support any modes other than SPP, and has only
* a subset of the standard printer control lines connected.
*/
#include <linux/threads.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/parport.h>
#include <asm/ptrace.h>
#include <asm/io.h>
#include <asm/arch/oldlatches.h>
#include <asm/arch/irqs.h>
#define DATA_ADDRESS 0x3350010
/* This is equivalent to the above and only used for request_region. */
#define PORT_BASE 0x80000000 | ((DATA_ADDRESS - IO_BASE) >> 2)
/* The hardware can't read from the data latch, so we must use a soft
copy. */
static unsigned char data_copy;
/* These are pretty simple. We know the irq is never shared and the
kernel does all the magic that's required. */
static void arc_enable_irq(struct parport *p)
{
enable_irq(p->irq);
}
static void arc_disable_irq(struct parport *p)
{
disable_irq(p->irq);
}
static void arc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
parport_generic_irq(irq, (struct parport *) dev_id, regs);
}
static void arc_write_data(struct parport *p, unsigned char data)
{
data_copy = data;
outb_t(data, DATA_LATCH);
}
static unsigned char arc_read_data(struct parport *p)
{
return data_copy;
}
static struct parport_operations parport_arc_ops =
{
.write_data = arc_write_data,
.read_data = arc_read_data,
.write_control = arc_write_control,
.read_control = arc_read_control,
.frob_control = arc_frob_control,
.read_status = arc_read_status,
.enable_irq = arc_enable_irq,
.disable_irq = arc_disable_irq,
.data_forward = arc_data_forward,
.data_reverse = arc_data_reverse,
.init_state = arc_init_state,
.save_state = arc_save_state,
.restore_state = arc_restore_state,
.epp_write_data = parport_ieee1284_epp_write_data,
.epp_read_data = parport_ieee1284_epp_read_data,
.epp_write_addr = parport_ieee1284_epp_write_addr,
.epp_read_addr = parport_ieee1284_epp_read_addr,
.ecp_write_data = parport_ieee1284_ecp_write_data,
.ecp_read_data = parport_ieee1284_ecp_read_data,
.ecp_write_addr = parport_ieee1284_ecp_write_addr,
.compat_write_data = parport_ieee1284_write_compat,
.nibble_read_data = parport_ieee1284_read_nibble,
.byte_read_data = parport_ieee1284_read_byte,
.owner = THIS_MODULE,
};
/* --- Initialisation code -------------------------------- */
static int parport_arc_init(void)
{
/* Archimedes hardware provides only one port, at a fixed address */
struct parport *p;
struct resource res;
char *fake_name = "parport probe");
res = request_region(PORT_BASE, 1, fake_name);
if (res == NULL)
return 0;
p = parport_register_port (PORT_BASE, IRQ_PRINTERACK,
PARPORT_DMA_NONE, &parport_arc_ops);
if (!p) {
release_region(PORT_BASE, 1);
return 0;
}
p->modes = PARPORT_MODE_ARCSPP;
p->size = 1;
rename_region(res, p->name);
printk(KERN_INFO "%s: Archimedes on-board port, using irq %d\n",
p->irq);
/* Tell the high-level drivers about the port. */
parport_announce_port (p);
return 1;
}
module_init(parport_arc_init)
|
