diff options
Diffstat (limited to 'shared-core/r300_reg.h')
| -rw-r--r-- | shared-core/r300_reg.h | 224 |
1 files changed, 177 insertions, 47 deletions
diff --git a/shared-core/r300_reg.h b/shared-core/r300_reg.h index 0be01fc7..1920ab07 100644 --- a/shared-core/r300_reg.h +++ b/shared-core/r300_reg.h @@ -705,6 +705,27 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11) /* END: Rasterization / Interpolators - many guesses */ +/* Hierarchical Z Enable */ +#define R300_SC_HYPERZ 0x43a4 +# define R300_SC_HYPERZ_DISABLE (0 << 0) +# define R300_SC_HYPERZ_ENABLE (1 << 0) +# define R300_SC_HYPERZ_MIN (0 << 1) +# define R300_SC_HYPERZ_MAX (1 << 1) +# define R300_SC_HYPERZ_ADJ_256 (0 << 2) +# define R300_SC_HYPERZ_ADJ_128 (1 << 2) +# define R300_SC_HYPERZ_ADJ_64 (2 << 2) +# define R300_SC_HYPERZ_ADJ_32 (3 << 2) +# define R300_SC_HYPERZ_ADJ_16 (4 << 2) +# define R300_SC_HYPERZ_ADJ_8 (5 << 2) +# define R300_SC_HYPERZ_ADJ_4 (6 << 2) +# define R300_SC_HYPERZ_ADJ_2 (7 << 2) +# define R300_SC_HYPERZ_HZ_Z0MIN_NO (0 << 5) +# define R300_SC_HYPERZ_HZ_Z0MIN (1 << 5) +# define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6) +# define R300_SC_HYPERZ_HZ_Z0MAX (1 << 6) + +#define R300_SC_EDGERULE 0x43a8 + /* BEGIN: Scissors and cliprects */ /* There are four clipping rectangles. Their corner coordinates are inclusive. @@ -1358,19 +1379,14 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * for this. * Bit (1<<8) is the "test" bit. so plain write is 6 - vd */ -#define R300_RB3D_ZSTENCIL_CNTL_0 0x4F00 -# define R300_RB3D_Z_DISABLED_1 0x00000010 -# define R300_RB3D_Z_DISABLED_2 0x00000014 -# define R300_RB3D_Z_TEST 0x00000012 -# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 - -# define R300_RB3D_Z_TEST 0x00000012 -# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 -# define R300_RB3D_STENCIL_ENABLE 0x00000001 - -#define R300_RB3D_ZSTENCIL_CNTL_1 0x4F04 +#define R300_ZB_CNTL 0x4F00 +# define R300_STENCIL_ENABLE (1 << 0) +# define R300_Z_ENABLE (1 << 1) +# define R300_Z_WRITE_ENABLE (1 << 2) +# define R300_Z_SIGNED_COMPARE (1 << 3) +# define R300_STENCIL_FRONT_BACK (1 << 4) + +#define R300_ZB_ZSTENCILCNTL 0x4f04 /* functions */ # define R300_ZS_NEVER 0 # define R300_ZS_LESS 1 @@ -1390,52 +1406,166 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_ZS_INVERT 5 # define R300_ZS_INCR_WRAP 6 # define R300_ZS_DECR_WRAP 7 +# define R300_Z_FUNC_SHIFT 0 /* front and back refer to operations done for front and back faces, i.e. separate stencil function support */ -# define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT 0 -# define R300_RB3D_ZS1_FRONT_FUNC_SHIFT 3 -# define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT 6 -# define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT 9 -# define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT 12 -# define R300_RB3D_ZS1_BACK_FUNC_SHIFT 15 -# define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT 18 -# define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT 21 -# define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT 24 - -#define R300_RB3D_ZSTENCIL_CNTL_2 0x4F08 -# define R300_RB3D_ZS2_STENCIL_REF_SHIFT 0 -# define R300_RB3D_ZS2_STENCIL_MASK 0xFF -# define R300_RB3D_ZS2_STENCIL_MASK_SHIFT 8 -# define R300_RB3D_ZS2_STENCIL_WRITE_MASK_SHIFT 16 +# define R300_S_FRONT_FUNC_SHIFT 3 +# define R300_S_FRONT_SFAIL_OP_SHIFT 6 +# define R300_S_FRONT_ZPASS_OP_SHIFT 9 +# define R300_S_FRONT_ZFAIL_OP_SHIFT 12 +# define R300_S_BACK_FUNC_SHIFT 15 +# define R300_S_BACK_SFAIL_OP_SHIFT 18 +# define R300_S_BACK_ZPASS_OP_SHIFT 21 +# define R300_S_BACK_ZFAIL_OP_SHIFT 24 + +#define R300_ZB_STENCILREFMASK 0x4f08 +# define R300_STENCILREF_SHIFT 0 +# define R300_STENCILREF_MASK 0x000000ff +# define R300_STENCILMASK_SHIFT 8 +# define R300_STENCILMASK_MASK 0x0000ff00 +# define R300_STENCILWRITEMASK_SHIFT 16 +# define R300_STENCILWRITEMASK_MASK 0x00ff0000 /* gap */ -#define R300_RB3D_ZSTENCIL_FORMAT 0x4F10 -# define R300_DEPTH_FORMAT_16BIT_INT_Z (0 << 0) -# define R300_DEPTH_FORMAT_24BIT_INT_Z (2 << 0) - /* 16 bit format or some aditional bit ? */ -# define R300_DEPTH_FORMAT_UNK32 (32 << 0) +#define R300_ZB_FORMAT 0x4f10 +# define R300_DEPTHFORMAT_16BIT_INT_Z (0 << 0) +# define R300_DEPTHFORMAT_16BIT_13E3 (1 << 0) +# define R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL (2 << 0) +/* reserved up to (15 << 0) */ +# define R300_INVERT_13E3_LEADING_ONES (0 << 4) +# define R300_INVERT_13E3_LEADING_ZEROS (1 << 4) -#define R300_RB3D_EARLY_Z 0x4F14 -# define R300_EARLY_Z_DISABLE (0 << 0) -# define R300_EARLY_Z_ENABLE (1 << 0) +#define R300_ZB_ZTOP 0x4F14 +# define R300_ZTOP_DISABLE (0 << 0) +# define R300_ZTOP_ENABLE (1 << 0) /* gap */ -#define R300_RB3D_ZCACHE_CTLSTAT 0x4F18 /* GUESS */ -# define R300_RB3D_ZCACHE_UNKNOWN_01 0x1 -# define R300_RB3D_ZCACHE_UNKNOWN_03 0x3 +#define R300_ZB_ZCACHE_CTLSTAT 0x4f18 +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT (0 << 0) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT (0 << 1) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE (1 << 1) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE (0 << 31) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY (1 << 31) + +#define R300_ZB_BW_CNTL 0x4f1c +# define R300_HIZ_DISABLE (0 << 0) +# define R300_HIZ_ENABLE (1 << 0) +# define R300_HIZ_MIN (0 << 1) +# define R300_HIZ_MAX (1 << 1) +# define R300_FAST_FILL_DISABLE (0 << 2) +# define R300_FAST_FILL_ENABLE (1 << 2) +# define R300_RD_COMP_DISABLE (0 << 3) +# define R300_RD_COMP_ENABLE (1 << 3) +# define R300_WR_COMP_DISABLE (0 << 4) +# define R300_WR_COMP_ENABLE (1 << 4) +# define R300_ZB_CB_CLEAR_RMW (0 << 5) +# define R300_ZB_CB_CLEAR_CACHE_LINEAR (1 << 5) +# define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6) +# define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6) + +# define R500_ZEQUAL_OPTIMIZE_ENABLE (0 << 7) +# define R500_ZEQUAL_OPTIMIZE_DISABLE (1 << 7) +# define R500_SEQUAL_OPTIMIZE_ENABLE (0 << 8) +# define R500_SEQUAL_OPTIMIZE_DISABLE (1 << 8) + +# define R500_BMASK_ENABLE (0 << 10) +# define R500_BMASK_DISABLE (1 << 10) +# define R500_HIZ_EQUAL_REJECT_DISABLE (0 << 11) +# define R500_HIZ_EQUAL_REJECT_ENABLE (1 << 11) +# define R500_HIZ_FP_EXP_BITS_DISABLE (0 << 12) +# define R500_HIZ_FP_EXP_BITS_1 (1 << 12) +# define R500_HIZ_FP_EXP_BITS_2 (2 << 12) +# define R500_HIZ_FP_EXP_BITS_3 (3 << 12) +# define R500_HIZ_FP_EXP_BITS_4 (4 << 12) +# define R500_HIZ_FP_EXP_BITS_5 (5 << 12) +# define R500_HIZ_FP_INVERT_LEADING_ONES (0 << 15) +# define R500_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15) +# define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16) +# define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16) +# define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17) +# define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17) +# define R500_PEQ_PACKING_DISABLE (0 << 18) +# define R500_PEQ_PACKING_ENABLE (1 << 18) +# define R500_COVERED_PTR_MASKING_DISABLE (0 << 18) +# define R500_COVERED_PTR_MASKING_ENABLE (1 << 18) + /* gap */ -#define R300_RB3D_DEPTHOFFSET 0x4F20 -#define R300_RB3D_DEPTHPITCH 0x4F24 -# define R300_DEPTHPITCH_MASK 0x00001FF8 /* GUESS */ -# define R300_DEPTH_TILE_ENABLE (1 << 16) /* GUESS */ -# define R300_DEPTH_MICROTILE_ENABLE (1 << 17) /* GUESS */ -# define R300_DEPTH_ENDIAN_NO_SWAP (0 << 18) /* GUESS */ -# define R300_DEPTH_ENDIAN_WORD_SWAP (1 << 18) /* GUESS */ -# define R300_DEPTH_ENDIAN_DWORD_SWAP (2 << 18) /* GUESS */ +/* Z Buffer Address Offset. + * Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles. + */ +#define R300_ZB_DEPTHOFFSET 0x4f20 + +/* Z Buffer Pitch and Endian Control */ +#define R300_ZB_DEPTHPITCH 0x4f24 +# define R300_DEPTHPITCH_MASK 0x00003FFC +# define R300_DEPTHMACROTILE_DISABLE (0 << 16) +# define R300_DEPTHMACROTILE_ENABLE (1 << 16) +# define R300_DEPTHMICROTILE_LINEAR (0 << 17) +# define R300_DEPTHMICROTILE_TILED (1 << 17) +# define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17) +# define R300_DEPTHENDIAN_NO_SWAP (0 << 18) +# define R300_DEPTHENDIAN_WORD_SWAP (1 << 18) +# define R300_DEPTHENDIAN_DWORD_SWAP (2 << 18) +# define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18) + +/* Z Buffer Clear Value */ +#define R300_ZB_DEPTHCLEARVALUE 0x4f28 + +#define R300_ZB_ZMASK_OFFSET 0x4f30 +#define R300_ZB_ZMASK_PITCH 0x4f34 +#define R300_ZB_ZMASK_WRINDEX 0x4f38 +#define R300_ZB_ZMASK_DWORD 0x4f3c +#define R300_ZB_ZMASK_RDINDEX 0x4f40 + +/* Hierarchical Z Memory Offset */ +#define R300_ZB_HIZ_OFFSET 0x4f44 + +/* Hierarchical Z Write Index */ +#define R300_ZB_HIZ_WRINDEX 0x4f48 + +/* Hierarchical Z Data */ +#define R300_ZB_HIZ_DWORD 0x4f4c + +/* Hierarchical Z Read Index */ +#define R300_ZB_HIZ_RDINDEX 0x4f50 + +/* Hierarchical Z Pitch */ +#define R300_ZB_HIZ_PITCH 0x4f54 + +/* Z Buffer Z Pass Counter Data */ +#define R300_ZB_ZPASS_DATA 0x4f58 + +/* Z Buffer Z Pass Counter Address */ +#define R300_ZB_ZPASS_ADDR 0x4f5c + +/* Depth buffer X and Y coordinate offset */ +#define R300_ZB_DEPTHXY_OFFSET 0x4f60 +# define R300_DEPTHX_OFFSET_SHIFT 1 +# define R300_DEPTHX_OFFSET_MASK 0x000007FE +# define R300_DEPTHY_OFFSET_SHIFT 17 +# define R300_DEPTHY_OFFSET_MASK 0x07FE0000 + +/* Sets the fifo sizes */ +#define R500_ZB_FIFO_SIZE 0x4fd0 +# define R500_OP_FIFO_SIZE_FULL (0 << 0) +# define R500_OP_FIFO_SIZE_HALF (1 << 0) +# define R500_OP_FIFO_SIZE_QUATER (2 << 0) +# define R500_OP_FIFO_SIZE_EIGTHS (4 << 0) + +/* Stencil Reference Value and Mask for backfacing quads */ +/* R300_ZB_STENCILREFMASK handles front face */ +#define R500_ZB_STENCILREFMASK_BF 0x4fd4 +# define R500_STENCILREF_SHIFT 0 +# define R500_STENCILREF_MASK 0x000000ff +# define R500_STENCILMASK_SHIFT 8 +# define R500_STENCILMASK_MASK 0x0000ff00 +# define R500_STENCILWRITEMASK_SHIFT 16 +# define R500_STENCILWRITEMASK_MASK 0x00ff0000 /* BEGIN: Vertex program instruction set */ |