aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--ChangeLog32
-rw-r--r--Makefile.am1
-rw-r--r--configure.ac2
-rw-r--r--doc/reference/libcrystfel/CrystFEL-docs.sgml2
-rw-r--r--libcrystfel/Makefile.am2
-rw-r--r--relnotes-0.6.0257
6 files changed, 288 insertions, 8 deletions
diff --git a/ChangeLog b/ChangeLog
index a3f675ff..fe1c1d8c 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,10 +1,32 @@
-Changes in this development version
------------------------------------
+CrystFEL version 0.6.0, 23rd February 2015
+------------------------------------------
-- The geometry specification was extended to allow multiple events per HDF5 file
- as well as different panels in different HDF5 locations.
+- The geometry specification was extended to allow multiple events per HDF5
+ file as well as different panels in different HDF5 locations.
+- geoptimiser, list_events and whirligig were added.
+- CrystFEL unit cell files were introduced.
+- Beam parameter files are no longer used.
+- indexamajig auto-determination of prediction parameters was added.
+- indexamajig --fix-profile-radius, --fix-bandwidth and --fix-divergence were
+ added.
+- pattern_sim --beam-bandwidth, --photon-energy and --nphotons were added.
+- partial_sim --beam-bandwidth, --photon-energy, --beam-divergence and
+ --profile-radius were added.
+- Event serial numbers are now written in streams.
+- indexamajig -e/--image was removed.
+- process_hkl --stat and --min-cc were added.
+- render_hkl --highres and --no-axes were added.
+- partialator --max-adu was added.
+- 2D profile fitting (--integration=prof2d) was fixed.
+- CSPAD geometry file examples were improved.
+- compare_hkl --fom=d1sig and d2sig were added.
+- pattern_sim now simulates detector saturation.
+- Compression was switched off when saving HDF5 files.
+- The units conversion for the resolution limit written into the stream was
+ fixed.
+- The pre-merging Poission error calculation was improved.
- A bug in pattern_sim's handling of symmetry was fixed.
-- The documentation for indexamajig --tolerance was updated.
+- {check,compare}_hkl now report the min/max bin ranges.
CrystFEL version 0.5.4, 5th September 2014
diff --git a/Makefile.am b/Makefile.am
index cc9caab2..c1d28436 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -27,6 +27,7 @@ TESTS = tests/list_check $(MERGE_CHECKS) $(PARTIAL_CHECKS) \
tests/cell_check tests/ring_check tests/prof2d_check tests/ambi_check
EXTRA_DIST += $(MERGE_CHECKS) $(PARTIAL_CHECKS)
+EXTRA_DIST += relnotes-0.6.0
if BUILD_HDFSEE
bin_PROGRAMS += src/hdfsee
diff --git a/configure.ac b/configure.ac
index 96625c6e..d7ef46b1 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,6 +1,6 @@
dnl Process this file with autoconf to produce a configure script.
-AC_INIT([crystfel],[0.5.4],[taw@physics.org])
+AC_INIT([crystfel],[0.6.0],[taw@physics.org])
AC_CONFIG_AUX_DIR([build-aux])
AC_CONFIG_HEADERS([config.h])
AM_INIT_AUTOMAKE([subdir-objects])
diff --git a/doc/reference/libcrystfel/CrystFEL-docs.sgml b/doc/reference/libcrystfel/CrystFEL-docs.sgml
index e9027306..ae0a115a 100644
--- a/doc/reference/libcrystfel/CrystFEL-docs.sgml
+++ b/doc/reference/libcrystfel/CrystFEL-docs.sgml
@@ -8,7 +8,7 @@
<bookinfo>
<title>CrystFEL Reference Manual</title>
<releaseinfo>
- For libcrystfel from CrystFEL 0.5.4.
+ For libcrystfel from CrystFEL 0.6.0.
</releaseinfo>
<abstract>
This is the internal documentation for CrystFEL. Unless you are looking at
diff --git a/libcrystfel/Makefile.am b/libcrystfel/Makefile.am
index 2cdfba10..9fbd4483 100644
--- a/libcrystfel/Makefile.am
+++ b/libcrystfel/Makefile.am
@@ -1,6 +1,6 @@
lib_LTLIBRARIES = libcrystfel.la
libcrystfel_la_LIBADD = ../lib/libgnu.la @LIBCRYSTFEL_LIBS@ $(PTY_LIB)
-libcrystfel_la_LDFLAGS = -version-info 5:0:0
+libcrystfel_la_LDFLAGS = -version-info 6:0:0
libcrystfel_la_SOURCES = src/reflist.c src/utils.c src/cell.c src/detector.c \
src/thread-pool.c src/image.c src/hdf5-file.c \
diff --git a/relnotes-0.6.0 b/relnotes-0.6.0
new file mode 100644
index 00000000..22efa56d
--- /dev/null
+++ b/relnotes-0.6.0
@@ -0,0 +1,257 @@
+CrystFEL - Crystallography with a FEL
+-------------------------------------
+
+Release notes for version 0.6.0
+
+Copyright © 2012-2015 Deutsches Elektronen-Synchrotron DESY,
+ a research centre of the Helmholtz Association.
+
+Authors:
+ Thomas White <taw@physics.org>
+ Richard Kirian <rkirian@asu.edu>
+ Kenneth Beyerlein <kenneth.beyerlein@desy.de>
+ Andrew Aquila <andrew.aquila@cfel.de>
+ Andrew Martin <andrew.martin@desy.de>
+ Lorenzo Galli <lorenzo.galli@desy.de>
+ Chun Hong Yoon <chun.hong.yoon@desy.de>
+ Kenneth Beyerlein <kenneth.beyerlein@desy.de>
+ Karol Nass <karol.nass@desy.de>
+ Nadia Zatsepin <nadia.zatsepin@asu.edu>
+ Anton Barty <anton.barty@desy.de>
+ Cornelius Gati <cornelius.gati@desy.de>
+ Fedor Chervinskii <fedor.chervinskii@gmail.com>
+ Alexandra Tolstikova <alexandra.tolstikova@desy.de>
+ Wolfgang Brehm <wolfgang.brehm@gmail.com>
+ Valerio Mariani <valerio.mariani@desy.de>
+ Parker de Waal <Parker.deWaal@vai.org>
+ Takanori Nakane <nakane.t@gmail.com>
+ Keitaro Yamashita <k.yamashita@spring8.or.jp>
+ Oleksandr Yefanov <oleksandr.yefanov@cfel.de>
+
+CrystFEL is free software: you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation, either version 3 of the License, or (at your option) any later
+version.
+
+CrystFEL is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+CrystFEL. If not, see <http://www.gnu.org/licenses/>.
+
+
+Overview
+--------
+
+The most important new features in this version of CrystFEL are:
+
+- Support for multi-event HDF5 files (e.g. CXI format as used by CXIDB)
+
+- geoptimiser: a new tool for precisely optimising the detector geometry
+
+- Removal of beam files / automatic determination of spot prediction parameters
+
+- whirligig: a new tool for finding clusters of similarly-oriented
+ crystal snapshots, e.g. for finding "mini rotation series" in data
+ from slow extrusion sample delivery methods.
+
+- Introduction of "CrystFEL unit cell files".
+
+These new features have individual sections below. In addition, there are many
+other new developments. See the ChangeLog or the changes page on the website
+for more details. There were, of course, the usual large number of smaller
+refinements and bug fixes.
+
+
+Support for multi-event HDF5 files
+----------------------------------
+
+CrystFEL's handling of HDF5 files has been made much more flexible. Most
+importantly, it now offers the ability to handle HDF5 files which contain more
+than one event (frame). Until now, CrystFEL has required that each event be
+contained in its own file, which can place a lot of unnecessary strain on
+filesystems. Recent versions of Cheetah allow you to create larger files which
+contain many events each using the CXI format (see http://www.cxidb.org for more
+details). CrystFEL now supports this as well as almost any reasonable
+multi-event HDF5 layout.
+
+If you choose to continue using many small files, you should not notice much
+difference. However, some small updates will be required. Firstly,
+indexamajig's "-e" and "--image" command-line parameters have been removed.
+Instead, you need to edit your geometry file and add a line such as this near
+the top:
+
+ data = /data/rawdata
+
+Geometry files now contain all the information needed to interpret the contents
+of the HDF5 files as a physical setup, including the photon energy. Beam
+parameter files have been removed. See below for more information about this.
+
+When using multi-event files in CXI format, the peak lists are read differently.
+Use --peaks=cxi to retrieve peak lists from CXI files.
+
+hdfsee has been extended to support multi-event files, including navigation
+between events. You should always provide a geometry file on the command line,
+otherwise it won't know how to interpret the contents of your HDF5 file.
+
+A new tool in CrystFEL 0.6.0, list_events, is provided to simplify the process
+of creating lists of individual events. However, most users will simply be
+able to list the multi-event filenames themselves in the input to indexamajig,
+which will then process all of the events in the file. See "man indexamajig"
+and "man list_events" for more details.
+
+Finally, it may be necessary to update your check-near-bragg and
+check-peak-detection scripts. Simply make a fresh copy from the CrystFEL
+"scripts" folder or download them from the website.
+
+
+geoptimiser: a tool for optimising the detector geometry
+--------------------------------------------------------
+
+CrystFEL 0.6.0 introduces a new tool, geoptimiser, for optimising the detector
+geometry. You simply give it a stream containing indexing results obtained with
+the approximate geometry, and it gives you a refined geometry. It can refine
+panel translations, rotations and camera lengths.
+
+To use geoptimiser, you need to add some extra information about the
+mechanical construction of your detector. This is used to constrain the
+refinement appropriately, for example to ensure that panels which share sensor
+silicon do not move relative to one another. If you're processing CSPAD data,
+you can simply copy all the rigid_group lines from one of the CSPAD geometry
+file examples (folder doc/examples) into your own geometry file.
+
+Refer to "man geoptimiser" and "man crystfel_geometry" for more information.
+
+
+Removal of beam files / automatic determination of spot prediction parameters
+-----------------------------------------------------------------------------
+
+As of version 0.6.0, "beam files" have been removed completely. This should
+simplify usage for most people and remove a lot of ambiguity. Programs which
+need X-ray beam parameters, such as pattern_sim, now have additional command-
+-line arguments to provide them. indexamajig now determines these parameters
+automatically for the purposes of spot prediction.
+
+We are interested in feedback about the automatic spot prediction parameter
+determination. If it appears not to work well for you, you can restore the old
+behaviour by using the new command-line options for indexamajig:
+--fix-profile-radius, --fix-bandwidth and --fix-divergence. Simply set these
+parameters to the values you had in your old beam file.
+
+The photon energy, or information about where to get it, now needs to be in the
+geometry file. This can be done with a line like this:
+
+ photon_energy = /LCLS/photon_energy_eV
+
+or, for a fixed value:
+
+ photon_energy = 8300
+
+
+whirligig: a tool for finding "mini rotation series"
+----------------------------------------------------
+
+CrystFEL 0.6.0 introduces yet another tool, whirligig, which can be used for
+locating "mini rotation series" in the output from indexamajig. This might be
+used to perform an experiment similar to that described by Gati et al., IUCrJ
+1 (2014) p87. In this initial version, whirligig finds runs of consecutive
+frames which contain crystals in similar orientations. It writes the
+corresponding filenames and event/crystal identifiers to log files, which might
+be useful for further analysis.
+
+This is the program described by Nogly et al., IUCrJ 2 (2015). Refer to "man
+whirligig" for usage information.
+
+
+Introduction of CrystFEL unit cell files
+----------------------------------------
+
+CrystFEL offers you the ability to index patterns using Bravais lattice
+information but without unit cell parameters, for example: "index these using
+only tetragonal primitive lattices, but any parameters". However, it's awkward
+to give this information using a PDB file: you essentially have to "trick" it
+into interpreting the parameters correctly, then throw away the parameter
+information.
+
+Version 0.6.0 of CrystFEL introduces a new way of specifying unit cell
+information. These new unit cell files look like this:
+
+ CrystFEL unit cell file version 1.0
+
+ lattice_type = cubic
+ centering = I
+
+ a = 66.2 A
+ b = 66.2 A
+ c = 66.2 A
+
+ al = 90.0 deg
+ be = 90.0 deg
+ ga = 90.0 deg
+
+In the event that you want to specify the lattice type information alone, you
+can simply omit the cell parameters:
+
+ CrystFEL unit cell file version 1.0
+
+ lattice_type = tetragonal
+ centering = P
+ unique_axis = c
+
+Note that a unique axis must be specified for all types of cell where this makes
+sense, and can be omitted otherwise. This was done in the first example above,
+which is cubic and therefore has no unique axis.
+
+You can, of course, continue to use PDB files just like before.
+
+
+API changes
+-----------
+
+The following changes have been made to the libcrystfel API:
+
+New functions:
+ - The event API (see libcrystfel/src/events.h)
+ - load_cell_from_file()
+ - cell_has_parameters()
+ - find_orig_panel()
+ - crystal_{get,set}_num_implausible_reflections() were added
+ - panel_is_in_rigid_group()
+ - rigid_group_is_in_collection()
+ - single_panel_data_source()
+ - find_rigid_group_collection_by_name()
+ - write_detector_geometry_2()
+ - find_intersections_to_res()
+ - sphere_fraction()
+ - gaussian_fraction()
+ - hdf5_read2()
+ - check_path_existence()
+ - get_peaks_cxi()
+ - hdfile_get_value()
+ - fill_event_list()
+ - image_reflection_closest()
+ - intmat_identity()
+ - extract_f_from_stuff()
+
+Removed functions:
+ - cell_set_cartesian_{a,b,c}()
+ - cell_{get,set}_pointgroup()
+ - twod_mapping()
+ - get_value()
+
+Changed function prototypes:
+ - record_image()
+ - get_detector_geometry()
+ - fill_in_values()
+ - write_detector_geometry()
+ - hdf5_write_image()
+ - hdf5_read()
+ - hdfile_set_image()
+ - hdfile_get_string_value()
+ - {get,set}_partial()
+ - write_chunk()
+ - prepare_indexing() and {dirax,mosflm,reax,grainspotter,xds}_prepare()
+
+beam-parameters.h was removed, and "struct beam_params" is now defined in
+image.h.