aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTejun Heo <htejun@gmail.com>2007-01-03 17:32:45 +0900
committerJeff Garzik <jeff@garzik.org>2007-02-09 17:39:31 -0500
commit1fd7a697a37bcd484b130a71326e43cd68ced90c (patch)
treee1fcf2acf6698e2403367a2c4136911af5653f17
parent726f0785b608d09bdd64bdbadc09217ebbf9920e (diff)
sata_inic162x: finally, driver for initio 162x SATA controllers, take #2
Driver for Initio 162x SATA controllers. ATA r/w, ATAPI r, hotplug and suspend/resume work. ATAPI w (recording, that is) broken. Feel free to fix it, but be warned, this controller is weird. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-rw-r--r--drivers/ata/Kconfig6
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/sata_inic162x.c809
3 files changed, 816 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index f72b3415d75..ea102c08922 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -147,6 +147,12 @@ config SATA_VITESSE
If unsure, say N.
+config SATA_INIC162X
+ tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for Initio 162x Serial ATA.
+
config SATA_INTEL_COMBINED
bool
depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index a0df15d9e4a..cd096f0c78a 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SATA_SX4) += sata_sx4.o
obj-$(CONFIG_SATA_NV) += sata_nv.o
obj-$(CONFIG_SATA_ULI) += sata_uli.o
obj-$(CONFIG_SATA_MV) += sata_mv.o
+obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
obj-$(CONFIG_PATA_ALI) += pata_ali.o
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
new file mode 100644
index 00000000000..b67817e440c
--- /dev/null
+++ b/drivers/ata/sata_inic162x.c
@@ -0,0 +1,809 @@
+/*
+ * sata_inic162x.c - Driver for Initio 162x SATA controllers
+ *
+ * Copyright 2006 SUSE Linux Products GmbH
+ * Copyright 2006 Tejun Heo <teheo@novell.com>
+ *
+ * This file is released under GPL v2.
+ *
+ * This controller is eccentric and easily locks up if something isn't
+ * right. Documentation is available at initio's website but it only
+ * documents registers (not programming model).
+ *
+ * - ATA disks work.
+ * - Hotplug works.
+ * - ATAPI read works but burning doesn't. This thing is really
+ * peculiar about ATAPI and I couldn't figure out how ATAPI PIO and
+ * ATAPI DMA WRITE should be programmed. If you've got a clue, be
+ * my guest.
+ * - Both STR and STD work.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_device.h>
+
+#define DRV_NAME "sata_inic162x"
+#define DRV_VERSION "0.1"
+
+enum {
+ MMIO_BAR = 5,
+
+ NR_PORTS = 2,
+
+ HOST_CTL = 0x7c,
+ HOST_STAT = 0x7e,
+ HOST_IRQ_STAT = 0xbc,
+ HOST_IRQ_MASK = 0xbe,
+
+ PORT_SIZE = 0x40,
+
+ /* registers for ATA TF operation */
+ PORT_TF = 0x00,
+ PORT_ALT_STAT = 0x08,
+ PORT_IRQ_STAT = 0x09,
+ PORT_IRQ_MASK = 0x0a,
+ PORT_PRD_CTL = 0x0b,
+ PORT_PRD_ADDR = 0x0c,
+ PORT_PRD_XFERLEN = 0x10,
+
+ /* IDMA register */
+ PORT_IDMA_CTL = 0x14,
+
+ PORT_SCR = 0x20,
+
+ /* HOST_CTL bits */
+ HCTL_IRQOFF = (1 << 8), /* global IRQ off */
+ HCTL_PWRDWN = (1 << 13), /* power down PHYs */
+ HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */
+ HCTL_RPGSEL = (1 << 15), /* register page select */
+
+ HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST |
+ HCTL_RPGSEL,
+
+ /* HOST_IRQ_(STAT|MASK) bits */
+ HIRQ_PORT0 = (1 << 0),
+ HIRQ_PORT1 = (1 << 1),
+ HIRQ_SOFT = (1 << 14),
+ HIRQ_GLOBAL = (1 << 15), /* STAT only */
+
+ /* PORT_IRQ_(STAT|MASK) bits */
+ PIRQ_OFFLINE = (1 << 0), /* device unplugged */
+ PIRQ_ONLINE = (1 << 1), /* device plugged */
+ PIRQ_COMPLETE = (1 << 2), /* completion interrupt */
+ PIRQ_FATAL = (1 << 3), /* fatal error */
+ PIRQ_ATA = (1 << 4), /* ATA interrupt */
+ PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */
+ PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */
+
+ PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
+
+ PIRQ_MASK_DMA_READ = PIRQ_REPLY | PIRQ_ATA,
+ PIRQ_MASK_OTHER = PIRQ_REPLY | PIRQ_COMPLETE,
+ PIRQ_MASK_FREEZE = 0xff,
+
+ /* PORT_PRD_CTL bits */
+ PRD_CTL_START = (1 << 0),
+ PRD_CTL_WR = (1 << 3),
+ PRD_CTL_DMAEN = (1 << 7), /* DMA enable */
+
+ /* PORT_IDMA_CTL bits */
+ IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */
+ IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */
+ IDMA_CTL_GO = (1 << 7), /* IDMA mode go */
+ IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */
+};
+
+struct inic_host_priv {
+ u16 cached_hctl;
+};
+
+struct inic_port_priv {
+ u8 dfl_prdctl;
+ u8 cached_prdctl;
+ u8 cached_pirq_mask;
+};
+
+static int inic_slave_config(struct scsi_device *sdev)
+{
+ /* This controller is braindamaged. dma_boundary is 0xffff
+ * like others but it will lock up the whole machine HARD if
+ * 65536 byte PRD entry is fed. Reduce maximum segment size.
+ */
+ blk_queue_max_segment_size(sdev->request_queue, 65536 - 512);
+
+ return ata_scsi_slave_config(sdev);
+}
+
+static struct scsi_host_template inic_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = inic_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+ .suspend = ata_scsi_device_suspend,
+ .resume = ata_scsi_device_resume,
+};
+
+static const int scr_map[] = {
+ [SCR_STATUS] = 0,
+ [SCR_ERROR] = 1,
+ [SCR_CONTROL] = 2,
+};
+
+static void __iomem * inic_port_base(struct ata_port *ap)
+{
+ return ap->host->mmio_base + ap->port_no * PORT_SIZE;
+}
+
+static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask)
+{
+ void __iomem *port_base = inic_port_base(ap);
+ struct inic_port_priv *pp = ap->private_data;
+
+ writeb(mask, port_base + PORT_IRQ_MASK);
+ pp->cached_pirq_mask = mask;
+}
+
+static void inic_set_pirq_mask(struct ata_port *ap, u8 mask)
+{
+ struct inic_port_priv *pp = ap->private_data;
+
+ if (pp->cached_pirq_mask != mask)
+ __inic_set_pirq_mask(ap, mask);
+}
+
+static void inic_reset_port(void __iomem *port_base)
+{
+ void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
+ u16 ctl;
+
+ ctl = readw(idma_ctl);
+ ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO);
+
+ /* mask IRQ and assert reset */
+ writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl);
+ readw(idma_ctl); /* flush */
+
+ /* give it some time */
+ msleep(1);
+
+ /* release reset */
+ writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl);
+
+ /* clear irq */
+ writeb(0xff, port_base + PORT_IRQ_STAT);
+
+ /* reenable ATA IRQ, turn off IDMA mode */
+ writew(ctl, idma_ctl);
+}
+
+static u32 inic_scr_read(struct ata_port *ap, unsigned sc_reg)
+{
+ void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
+ void __iomem *addr;
+ u32 val;
+
+ if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
+ return 0xffffffffU;
+
+ addr = scr_addr + scr_map[sc_reg] * 4;
+ val = readl(scr_addr + scr_map[sc_reg] * 4);
+
+ /* this controller has stuck DIAG.N, ignore it */
+ if (sc_reg == SCR_ERROR)
+ val &= ~SERR_PHYRDY_CHG;
+ return val;
+}
+
+static void inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
+{
+ void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
+ void __iomem *addr;
+
+ if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
+ return;
+
+ addr = scr_addr + scr_map[sc_reg] * 4;
+ writel(val, scr_addr + scr_map[sc_reg] * 4);
+}
+
+/*
+ * In TF mode, inic162x is very similar to SFF device. TF registers
+ * function the same. DMA engine behaves similary using the same PRD
+ * format as BMDMA but different command register, interrupt and event
+ * notification methods are used. The following inic_bmdma_*()
+ * functions do the impedance matching.
+ */
+static void inic_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct inic_port_priv *pp = ap->private_data;
+ void __iomem *port_base = inic_port_base(ap);
+ int rw = qc->tf.flags & ATA_TFLAG_WRITE;
+
+ /* make sure device sees PRD table writes */
+ wmb();
+
+ /* load transfer length */
+ writel(qc->nbytes, port_base + PORT_PRD_XFERLEN);
+
+ /* turn on DMA and specify data direction */
+ pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN;
+ if (!rw)
+ pp->cached_prdctl |= PRD_CTL_WR;
+ writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
+
+ /* issue r/w command */
+ ap->ops->exec_command(ap, &qc->tf);
+}
+
+static void inic_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct inic_port_priv *pp = ap->private_data;
+ void __iomem *port_base = inic_port_base(ap);
+
+ /* start host DMA transaction */
+ pp->cached_prdctl |= PRD_CTL_START;
+ writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
+}
+
+static void inic_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct inic_port_priv *pp = ap->private_data;
+ void __iomem *port_base = inic_port_base(ap);
+
+ /* stop DMA engine */
+ writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
+}
+
+static u8 inic_bmdma_status(struct ata_port *ap)
+{
+ /* event is already verified by the interrupt handler */
+ return ATA_DMA_INTR;
+}
+
+static void inic_irq_clear(struct ata_port *ap)
+{
+ /* noop */
+}
+
+static void inic_host_intr(struct ata_port *ap)
+{
+ void __iomem *port_base = inic_port_base(ap);
+ struct ata_eh_info *ehi = &ap->eh_info;
+ u8 irq_stat;
+
+ /* fetch and clear irq */
+ irq_stat = readb(port_base + PORT_IRQ_STAT);
+ writeb(irq_stat, port_base + PORT_IRQ_STAT);
+
+ if (likely(!(irq_stat & PIRQ_ERR))) {
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+
+ if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
+ ata_chk_status(ap); /* clear ATA interrupt */
+ return;
+ }
+
+ if (likely(ata_host_intr(ap, qc)))
+ return;
+
+ ata_chk_status(ap); /* clear ATA interrupt */
+ ata_port_printk(ap, KERN_WARNING, "unhandled "
+ "interrupt, irq_stat=%x\n", irq_stat);
+ return;
+ }
+
+ /* error */
+ ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat);
+
+ if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
+ ata_ehi_hotplugged(ehi);
+ ata_port_freeze(ap);
+ } else
+ ata_port_abort(ap);
+}
+
+static irqreturn_t inic_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ void __iomem *mmio_base = host->mmio_base;
+ u16 host_irq_stat;
+ int i, handled = 0;;
+
+ host_irq_stat = readw(mmio_base + HOST_IRQ_STAT);
+
+ if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
+ goto out;
+
+ spin_lock(&host->lock);
+
+ for (i = 0; i < NR_PORTS; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ if (!(host_irq_stat & (HIRQ_PORT0 << i)))
+ continue;
+
+ if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) {
+ inic_host_intr(ap);
+ handled++;
+ } else {
+ if (ata_ratelimit())
+ dev_printk(KERN_ERR, host->dev, "interrupt "
+ "from disabled port %d (0x%x)\n",
+ i, host_irq_stat);
+ }
+ }
+
+ spin_unlock(&host->lock);
+
+ out:
+ return IRQ_RETVAL(handled);
+}
+
+static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* ATA IRQ doesn't wait for DMA transfer completion and vice
+ * versa. Mask IRQ selectively to detect command completion.
+ * Without it, ATA DMA read command can cause data corruption.
+ *
+ * Something similar might be needed for ATAPI writes. I
+ * tried a lot of combinations but couldn't find the solution.
+ */
+ if (qc->tf.protocol == ATA_PROT_DMA &&
+ !(qc->tf.flags & ATA_TFLAG_WRITE))
+ inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ);
+ else
+ inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+
+ /* Issuing a command to yet uninitialized port locks up the
+ * controller. Most of the time, this happens for the first
+ * command after reset which are ATA and ATAPI IDENTIFYs.
+ * Fast fail if stat is 0x7f or 0xff for those commands.
+ */
+ if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
+ qc->tf.command == ATA_CMD_ID_ATAPI)) {
+ u8 stat = ata_chk_status(ap);
+ if (stat == 0x7f || stat == 0xff)
+ return AC_ERR_HSM;
+ }
+
+ return ata_qc_issue_prot(qc);
+}
+
+static void inic_freeze(struct ata_port *ap)
+{
+ void __iomem *port_base = inic_port_base(ap);
+
+ __inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
+
+ ata_chk_status(ap);
+ writeb(0xff, port_base + PORT_IRQ_STAT);
+
+ readb(port_base + PORT_IRQ_STAT); /* flush */
+}
+
+static void inic_thaw(struct ata_port *ap)
+{
+ void __iomem *port_base = inic_port_base(ap);
+
+ ata_chk_status(ap);
+ writeb(0xff, port_base + PORT_IRQ_STAT);
+
+ __inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+
+ readb(port_base + PORT_IRQ_STAT); /* flush */
+}
+
+/*
+ * SRST and SControl hardreset don't give valid signature on this
+ * controller. Only controller specific hardreset mechanism works.
+ */
+static int inic_hardreset(struct ata_port *ap, unsigned int *class)
+{
+ void __iomem *port_base = inic_port_base(ap);
+ void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
+ const unsigned long *timing = sata_ehc_deb_timing(&ap->eh_context);
+ u16 val;
+ int rc;
+
+ /* hammer it into sane state */
+ inic_reset_port(port_base);
+
+ if (ata_port_offline(ap)) {
+ *class = ATA_DEV_NONE;
+ return 0;
+ }
+
+ val = readw(idma_ctl);
+ writew(val | IDMA_CTL_RST_ATA, idma_ctl);
+ readw(idma_ctl); /* flush */
+ msleep(1);
+ writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
+
+ rc = sata_phy_resume(ap, timing);
+ if (rc) {
+ ata_port_printk(ap, KERN_WARNING, "failed to resume "
+ "link for reset (errno=%d)\n", rc);
+ return rc;
+ }
+
+ msleep(150);
+
+ *class = ATA_DEV_NONE;
+ if (ata_port_online(ap)) {
+ struct ata_taskfile tf;
+
+ if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
+ ata_port_printk(ap, KERN_WARNING,
+ "device busy after hardreset\n");
+ return -EIO;
+ }
+
+ ata_tf_read(ap, &tf);
+ *class = ata_dev_classify(&tf);
+ if (*class == ATA_DEV_UNKNOWN)
+ *class = ATA_DEV_NONE;
+ }
+
+ return 0;
+}
+
+static void inic_error_handler(struct ata_port *ap)
+{
+ void __iomem *port_base = inic_port_base(ap);
+ struct inic_port_priv *pp = ap->private_data;
+ unsigned long flags;
+
+ /* reset PIO HSM and stop DMA engine */
+ inic_reset_port(port_base);
+
+ spin_lock_irqsave(ap->lock, flags);
+ ap->hsm_task_state = HSM_ST_IDLE;
+ writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ /* PIO and DMA engines have been stopped, perform recovery */
+ ata_do_eh(ap, ata_std_prereset, NULL, inic_hardreset,
+ ata_std_postreset);
+}
+
+static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ /* make DMA engine forget about the failed command */
+ if (qc->err_mask)
+ inic_reset_port(inic_port_base(qc->ap));
+}
+
+static void inic_dev_config(struct ata_port *ap, struct ata_device *dev)
+{
+ /* inic can only handle upto LBA28 max sectors */
+ if (dev->max_sectors > ATA_MAX_SECTORS)
+ dev->max_sectors = ATA_MAX_SECTORS;
+}
+
+static void init_port(struct ata_port *ap)
+{
+ void __iomem *port_base = inic_port_base(ap);
+
+ /* Setup PRD address */
+ writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
+}
+
+static int inic_port_resume(struct ata_port *ap)
+{
+ init_port(ap);
+ return 0;
+}
+
+static int inic_port_start(struct ata_port *ap)
+{
+ void __iomem *port_base = inic_port_base(ap);
+ struct inic_port_priv *pp;
+ u8 tmp;
+ int rc;
+
+ /* alloc and initialize private data */
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+ ap->private_data = pp;
+
+ /* default PRD_CTL value, DMAEN, WR and START off */
+ tmp = readb(port_base + PORT_PRD_CTL);
+ tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START);
+ pp->dfl_prdctl = tmp;
+
+ /* Alloc resources */
+ rc = ata_port_start(ap);
+ if (rc) {
+ kfree(pp);
+ return rc;
+ }
+
+ init_port(ap);
+
+ return 0;
+}
+
+static void inic_port_stop(struct ata_port *ap)
+{
+ ata_port_stop(ap);
+ kfree(ap->private_data);
+}
+
+static struct ata_port_operations inic_port_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .scr_read = inic_scr_read,
+ .scr_write = inic_scr_write,
+
+ .bmdma_setup = inic_bmdma_setup,
+ .bmdma_start = inic_bmdma_start,
+ .bmdma_stop = inic_bmdma_stop,
+ .bmdma_status = inic_bmdma_status,
+
+ .irq_handler = inic_interrupt,
+ .irq_clear = inic_irq_clear,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = inic_qc_issue,
+ .data_xfer = ata_pio_data_xfer,
+
+ .freeze = inic_freeze,
+ .thaw = inic_thaw,
+ .error_handler = inic_error_handler,
+ .post_internal_cmd = inic_post_internal_cmd,
+ .dev_config = inic_dev_config,
+
+ .port_resume = inic_port_resume,
+
+ .port_start = inic_port_start,
+ .port_stop = inic_port_stop,
+ .host_stop = ata_pci_host_stop
+};
+
+static struct ata_port_info inic_port_info = {
+ .sht = &inic_sht,
+ /* For some reason, ATA_PROT_ATAPI is broken on this
+ * controller, and no, PIO_POLLING does't fix it. It somehow
+ * manages to report the wrong ireason and ignoring ireason
+ * results in machine lock up. Tell libata to always prefer
+ * DMA.
+ */
+ .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &inic_port_ops
+};
+
+static int init_controller(void __iomem *mmio_base, u16 hctl)
+{
+ int i;
+ u16 val;
+
+ hctl &= ~HCTL_KNOWN_BITS;
+
+ /* Soft reset whole controller. Spec says reset duration is 3
+ * PCI clocks, be generous and give it 10ms.
+ */
+ writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL);
+ readw(mmio_base + HOST_CTL); /* flush */
+
+ for (i = 0; i < 10; i++) {
+ msleep(1);
+ val = readw(mmio_base + HOST_CTL);
+ if (!(val & HCTL_SOFTRST))
+ break;
+ }
+
+ if (val & HCTL_SOFTRST)
+ return -EIO;
+
+ /* mask all interrupts and reset ports */
+ for (i = 0; i < NR_PORTS; i++) {
+ void __iomem *port_base = mmio_base + i * PORT_SIZE;
+
+ writeb(0xff, port_base + PORT_IRQ_MASK);
+ inic_reset_port(port_base);
+ }
+
+ /* port IRQ is masked now, unmask global IRQ */
+ writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL);
+ val = readw(mmio_base + HOST_IRQ_MASK);
+ val &= ~(HIRQ_PORT0 | HIRQ_PORT1);
+ writew(val, mmio_base + HOST_IRQ_MASK);
+
+ return 0;
+}
+
+static int inic_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct inic_host_priv *hpriv = host->private_data;
+ void __iomem *mmio_base = host->mmio_base;
+ int rc;
+
+ ata_pci_device_do_resume(pdev);
+
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+ printk("XXX\n");
+ rc = init_controller(mmio_base, hpriv->cached_hctl);
+ if (rc)
+ return rc;
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+
+static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version;
+ struct ata_port_info *pinfo = &inic_port_info;
+ struct ata_probe_ent *probe_ent;
+ struct inic_host_priv *hpriv;
+ void __iomem *mmio_base;
+ int i, rc;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+
+ rc = -ENOMEM;
+ mmio_base = pci_iomap(pdev, MMIO_BAR, 0);
+ if (!mmio_base)
+ goto err_out_regions;
+
+ /* Set dma_mask. This devices doesn't support 64bit addressing. */
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ goto err_out_map;
+ }
+
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ goto err_out_map;
+ }
+
+ rc = -ENOMEM;
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
+ if (!probe_ent)
+ goto err_out_map;
+
+ hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ goto err_out_ent;
+
+ probe_ent->dev = &pdev->dev;
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ probe_ent->sht = pinfo->sht;
+ probe_ent->port_flags = pinfo->flags;
+ probe_ent->pio_mask = pinfo->pio_mask;
+ probe_ent->mwdma_mask = pinfo->mwdma_mask;
+ probe_ent->udma_mask = pinfo->udma_mask;
+ probe_ent->port_ops = pinfo->port_ops;
+ probe_ent->n_ports = NR_PORTS;
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = SA_SHIRQ;
+
+ probe_ent->mmio_base = mmio_base;
+
+ for (i = 0; i < NR_PORTS; i++) {
+ struct ata_ioports *port = &probe_ent->port[i];
+ unsigned long port_base =
+ (unsigned long)mmio_base + i * PORT_SIZE;
+
+ port->cmd_addr = pci_resource_start(pdev, 2 * i);
+ port->altstatus_addr =
+ port->ctl_addr =
+ pci_resource_start(pdev, 2 * i + 1) | ATA_PCI_CTL_OFS;
+ port->scr_addr = port_base + PORT_SCR;
+
+ ata_std_ports(port);
+ }
+
+ probe_ent->private_data = hpriv;
+ hpriv->cached_hctl = readw(mmio_base + HOST_CTL);
+
+ rc = init_controller(mmio_base, hpriv->cached_hctl);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to initialize controller\n");
+ goto err_out_hpriv;
+ }
+
+ pci_set_master(pdev);
+
+ rc = -ENODEV;
+ if (!ata_device_add(probe_ent))
+ goto err_out_hpriv;
+
+ kfree(probe_ent);
+
+ return 0;
+
+ err_out_hpriv:
+ kfree(hpriv);
+ err_out_ent:
+ kfree(probe_ent);
+ err_out_map:
+ pci_iounmap(pdev, mmio_base);
+ err_out_regions:
+ pci_release_regions(pdev);
+ err_out:
+ pci_disable_device(pdev);
+ return rc;
+}
+
+static const struct pci_device_id inic_pci_tbl[] = {
+ { PCI_VDEVICE(INIT, 0x1622), },
+ { },
+};
+
+static struct pci_driver inic_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = inic_pci_tbl,
+ .suspend = ata_pci_device_suspend,
+ .resume = inic_pci_device_resume,
+ .probe = inic_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+static int __init inic_init(void)
+{
+ return pci_register_driver(&inic_pci_driver);
+}
+
+static void __exit inic_exit(void)
+{
+ pci_unregister_driver(&inic_pci_driver);
+}
+
+MODULE_AUTHOR("Tejun Heo");
+MODULE_DESCRIPTION("low-level driver for Initio 162x SATA");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(pci, inic_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(inic_init);
+module_exit(inic_exit);