aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2008-06-17 21:37:14 -0700
committerDavid S. Miller <davem@davemloft.net>2008-06-17 21:37:14 -0700
commit5bbc1722d52ad3df062d5742a7e958276e57ebd7 (patch)
tree8aa544f9a8623fba2fae933819627ceb839eac1f
parent30902dc3cb0ea1cfc7ac2b17bcf478ff98420d74 (diff)
parentae7b6487ec9c2e2a1551b9d291aa0dbbe0addf48 (diff)
Merge branch 'davem-next' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
-rw-r--r--Documentation/networking/bonding.txt14
-rw-r--r--MAINTAINERS18
-rw-r--r--drivers/net/Kconfig1
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/bonding/bond_main.c66
-rw-r--r--drivers/net/bonding/bond_sysfs.c22
-rw-r--r--drivers/net/bonding/bonding.h4
-rw-r--r--drivers/net/ibm_emac/Kconfig70
-rw-r--r--drivers/net/ibm_emac/Makefile11
-rw-r--r--drivers/net/ibm_emac/ibm_emac.h329
-rw-r--r--drivers/net/ibm_emac/ibm_emac_core.c2263
-rw-r--r--drivers/net/ibm_emac/ibm_emac_core.h222
-rw-r--r--drivers/net/ibm_emac/ibm_emac_debug.c211
-rw-r--r--drivers/net/ibm_emac/ibm_emac_debug.h62
-rw-r--r--drivers/net/ibm_emac/ibm_emac_mal.c570
-rw-r--r--drivers/net/ibm_emac/ibm_emac_mal.h267
-rw-r--r--drivers/net/ibm_emac/ibm_emac_phy.c398
-rw-r--r--drivers/net/ibm_emac/ibm_emac_phy.h80
-rw-r--r--drivers/net/ibm_emac/ibm_emac_rgmii.c200
-rw-r--r--drivers/net/ibm_emac/ibm_emac_rgmii.h64
-rw-r--r--drivers/net/ibm_emac/ibm_emac_tah.c110
-rw-r--r--drivers/net/ibm_emac/ibm_emac_tah.h87
-rw-r--r--drivers/net/ibm_emac/ibm_emac_zmii.c253
-rw-r--r--drivers/net/ibm_emac/ibm_emac_zmii.h82
-rw-r--r--drivers/net/mv643xx_eth.c4557
-rw-r--r--drivers/net/sky2.c66
-rw-r--r--drivers/net/sky2.h1
-rw-r--r--include/linux/mv643xx_eth.h65
-rw-r--r--include/linux/netdevice.h4
-rw-r--r--include/linux/notifier.h1
-rw-r--r--net/core/dev.c6
-rw-r--r--net/core/net-sysfs.c13
32 files changed, 2060 insertions, 8058 deletions
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 8e6b8d3c741..7fa7fe71d7a 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -376,7 +376,8 @@ max_bonds
Specifies the number of bonding devices to create for this
instance of the bonding driver. E.g., if max_bonds is 3, and
the bonding driver is not already loaded, then bond0, bond1
- and bond2 will be created. The default value is 1.
+ and bond2 will be created. The default value is 1. Specifying
+ a value of 0 will load bonding, but will not create any devices.
miimon
@@ -539,6 +540,17 @@ mode
swapped with the new curr_active_slave that was
chosen.
+num_grat_arp
+
+ Specifies the number of gratuitous ARPs to be issued after a
+ failover event. One gratuitous ARP is issued immediately after
+ the failover, subsequent ARPs are sent at a rate of one per link
+ monitor interval (arp_interval or miimon, whichever is active).
+
+ The valid range is 0 - 255; the default value is 1. This option
+ affects only the active-backup mode. This option was added for
+ bonding version 3.3.0.
+
primary
A string (eth0, eth2, etc) specifying which slave is the
diff --git a/MAINTAINERS b/MAINTAINERS
index cd587eec9fa..d0ea6ec2552 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2147,6 +2147,8 @@ P: Jesse Brandeburg
M: jesse.brandeburg@intel.com
P: Bruce Allan
M: bruce.w.allan@intel.com
+P: PJ Waskiewicz
+M: peter.p.waskiewicz.jr@intel.com
P: John Ronciak
M: john.ronciak@intel.com
L: e1000-devel@lists.sourceforge.net
@@ -2690,12 +2692,10 @@ L: libertas-dev@lists.infradead.org
S: Maintained
MARVELL MV643XX ETHERNET DRIVER
-P: Dale Farnsworth
-M: dale@farnsworth.org
-P: Manish Lachwani
-M: mlachwani@mvista.com
+P: Lennert Buytenhek
+M: buytenh@marvell.com
L: netdev@vger.kernel.org
-S: Odd Fixes for 2.4; Maintained for 2.6.
+S: Supported
MATROX FRAMEBUFFER DRIVER
P: Petr Vandrovec
@@ -3233,14 +3233,6 @@ L: linux-kernel@vger.kernel.org
T: git git.infradead.org/battery-2.6.git
S: Maintained
-POWERPC 4xx EMAC DRIVER
-P: Eugene Surovegin
-M: ebs@ebshome.net
-W: http://kernel.ebshome.net/emac/
-L: linuxppc-dev@ozlabs.org
-L: netdev@vger.kernel.org
-S: Maintained
-
PNP SUPPORT
P: Adam Belay
M: ambx1@neo.rr.com
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 20b5367f7e0..0e0f6696cca 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1255,7 +1255,6 @@ config IBMVETH
To compile this driver as a module, choose M here. The module will
be called ibmveth.
-source "drivers/net/ibm_emac/Kconfig"
source "drivers/net/ibm_newemac/Kconfig"
config NET_PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index c96fe203680..c9faa460590 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -4,7 +4,6 @@
obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_E1000E) += e1000e/
-obj-$(CONFIG_IBM_EMAC) += ibm_emac/
obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
obj-$(CONFIG_IGB) += igb/
obj-$(CONFIG_IXGBE) += ixgbe/
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 5b4af3cc2a4..d57b65dc2c7 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1189,22 +1189,21 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
if (new_active) {
bond_set_slave_active_flags(new_active);
- }
- if (new_active && bond->params.fail_over_mac)
- bond_do_fail_over_mac(bond, new_active, old_active);
+ if (bond->params.fail_over_mac)
+ bond_do_fail_over_mac(bond, new_active,
+ old_active);
- bond->send_grat_arp = bond->params.num_grat_arp;
- if (bond->curr_active_slave &&
- test_bit(__LINK_STATE_LINKWATCH_PENDING,
- &bond->curr_active_slave->dev->state)) {
- dprintk("delaying gratuitous arp on %s\n",
- bond->curr_active_slave->dev->name);
- } else {
- if (bond->send_grat_arp > 0) {
- bond_send_gratuitous_arp(bond);
- bond->send_grat_arp--;
- }
+ bond->send_grat_arp = bond->params.num_grat_arp;
+ bond_send_gratuitous_arp(bond);
+
+ write_unlock_bh(&bond->curr_slave_lock);
+ read_unlock(&bond->lock);
+
+ netdev_bonding_change(bond->dev);
+
+ read_lock(&bond->lock);
+ write_lock_bh(&bond->curr_slave_lock);
}
}
}
@@ -2235,17 +2234,6 @@ static int __bond_mii_monitor(struct bonding *bond, int have_locks)
* program could monitor the link itself if needed.
*/
- if (bond->send_grat_arp) {
- if (bond->curr_active_slave && test_bit(__LINK_STATE_LINKWATCH_PENDING,
- &bond->curr_active_slave->dev->state))
- dprintk("Needs to send gratuitous arp but not yet\n");
- else {
- dprintk("sending delayed gratuitous arp on on %s\n",
- bond->curr_active_slave->dev->name);
- bond_send_gratuitous_arp(bond);
- bond->send_grat_arp--;
- }
- }
read_lock(&bond->curr_slave_lock);
oldcurrent = bond->curr_active_slave;
read_unlock(&bond->curr_slave_lock);
@@ -2486,6 +2474,13 @@ void bond_mii_monitor(struct work_struct *work)
read_unlock(&bond->lock);
return;
}
+
+ if (bond->send_grat_arp) {
+ read_lock(&bond->curr_slave_lock);
+ bond_send_gratuitous_arp(bond);
+ read_unlock(&bond->curr_slave_lock);
+ }
+
if (__bond_mii_monitor(bond, 0)) {
read_unlock(&bond->lock);
rtnl_lock();
@@ -2651,6 +2646,8 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
/*
* Kick out a gratuitous ARP for an IP on the bonding master plus one
* for each VLAN above us.
+ *
+ * Caller must hold curr_slave_lock for read or better
*/
static void bond_send_gratuitous_arp(struct bonding *bond)
{
@@ -2660,9 +2657,13 @@ static void bond_send_gratuitous_arp(struct bonding *bond)
dprintk("bond_send_grat_arp: bond %s slave %s\n", bond->dev->name,
slave ? slave->dev->name : "NULL");
- if (!slave)
+
+ if (!slave || !bond->send_grat_arp ||
+ test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
return;
+ bond->send_grat_arp--;
+
if (bond->master_ip) {
bond_arp_send(slave->dev, ARPOP_REPLY, bond->master_ip,
bond->master_ip, 0);
@@ -3166,6 +3167,12 @@ void bond_activebackup_arp_mon(struct work_struct *work)
if (bond->slave_cnt == 0)
goto re_arm;
+ if (bond->send_grat_arp) {
+ read_lock(&bond->curr_slave_lock);
+ bond_send_gratuitous_arp(bond);
+ read_unlock(&bond->curr_slave_lock);
+ }
+
if (bond_ab_arp_inspect(bond, delta_in_ticks)) {
read_unlock(&bond->lock);
rtnl_lock();
@@ -3840,6 +3847,7 @@ static int bond_close(struct net_device *bond_dev)
write_lock_bh(&bond->lock);
+ bond->send_grat_arp = 0;
/* signal timers not to re-arm */
bond->kill_timers = 1;
@@ -4742,11 +4750,11 @@ static int bond_check_params(struct bond_params *params)
}
}
- if (max_bonds < 1 || max_bonds > INT_MAX) {
+ if (max_bonds < 0 || max_bonds > INT_MAX) {
printk(KERN_WARNING DRV_NAME
": Warning: max_bonds (%d) not in range %d-%d, so it "
"was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
- max_bonds, 1, INT_MAX, BOND_DEFAULT_MAX_BONDS);
+ max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
max_bonds = BOND_DEFAULT_MAX_BONDS;
}
@@ -4945,7 +4953,7 @@ static int bond_check_params(struct bond_params *params)
printk("\n");
- } else {
+ } else if (max_bonds) {
/* miimon and arp_interval not set, we need one so things
* work as expected, see bonding.txt for details
*/
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index dd265c69b0d..6caac0ffb2f 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -53,7 +53,6 @@ extern struct bond_parm_tbl arp_validate_tbl[];
extern struct bond_parm_tbl fail_over_mac_tbl[];
static int expected_refcount = -1;
-static struct class *netdev_class;
/*--------------------------- Data Structures -----------------------------*/
/* Bonding sysfs lock. Why can't we just use the subsystem lock?
@@ -1447,19 +1446,9 @@ static struct attribute_group bonding_group = {
*/
int bond_create_sysfs(void)
{
- int ret = 0;
- struct bonding *firstbond;
-
- /* get the netdev class pointer */
- firstbond = container_of(bond_dev_list.next, struct bonding, bond_list);
- if (!firstbond)
- return -ENODEV;
-
- netdev_class = firstbond->dev->dev.class;
- if (!netdev_class)
- return -ENODEV;
+ int ret;
- ret = class_create_file(netdev_class, &class_attr_bonding_masters);
+ ret = netdev_class_create_file(&class_attr_bonding_masters);
/*
* Permit multiple loads of the module by ignoring failures to
* create the bonding_masters sysfs file. Bonding devices
@@ -1478,10 +1467,6 @@ int bond_create_sysfs(void)
printk(KERN_ERR
"network device named %s already exists in sysfs",
class_attr_bonding_masters.attr.name);
- else {
- netdev_class = NULL;
- return 0;
- }
}
return ret;
@@ -1493,8 +1478,7 @@ int bond_create_sysfs(void)
*/
void bond_destroy_sysfs(void)
{
- if (netdev_class)
- class_remove_file(netdev_class, &class_attr_bonding_masters);
+ netdev_class_remove_file(&class_attr_bonding_masters);
}
/*
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 89fd9963db7..fb730ec0396 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -22,8 +22,8 @@
#include "bond_3ad.h"
#include "bond_alb.h"
-#define DRV_VERSION "3.2.5"
-#define DRV_RELDATE "March 21, 2008"
+#define DRV_VERSION "3.3.0"
+#define DRV_RELDATE "June 10, 2008"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
diff --git a/drivers/net/ibm_emac/Kconfig b/drivers/net/ibm_emac/Kconfig
deleted file mode 100644
index f61c48047dc..00000000000
--- a/drivers/net/ibm_emac/Kconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-config IBM_EMAC
- tristate "PowerPC 4xx on-chip Ethernet support"
- depends on 4xx && !PPC_MERGE
- help
- This driver supports the PowerPC 4xx EMAC family of on-chip
- Ethernet controllers.
-
-config IBM_EMAC_RXB
- int "Number of receive buffers"
- depends on IBM_EMAC
- default "128"
-
-config IBM_EMAC_TXB
- int "Number of transmit buffers"
- depends on IBM_EMAC
- default "64"
-
-config IBM_EMAC_POLL_WEIGHT
- int "MAL NAPI polling weight"
- depends on IBM_EMAC
- default "32"
-
-config IBM_EMAC_RX_COPY_THRESHOLD
- int "RX skb copy threshold (bytes)"
- depends on IBM_EMAC
- default "256"
-
-config IBM_EMAC_RX_SKB_HEADROOM
- int "Additional RX skb headroom (bytes)"
- depends on IBM_EMAC
- default "0"
- help
- Additional receive skb headroom. Note, that driver
- will always reserve at least 2 bytes to make IP header
- aligned, so usually there is no need to add any additional
- headroom.
-
- If unsure, set to 0.
-
-config IBM_EMAC_PHY_RX_CLK_FIX
- bool "PHY Rx clock workaround"
- depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
- help
- Enable this if EMAC attached to a PHY which doesn't generate
- RX clock if there is no link, if this is the case, you will
- see "TX disable timeout" or "RX disable timeout" in the system
- log.
-
- If unsure, say N.
-
-config IBM_EMAC_DEBUG
- bool "Debugging"
- depends on IBM_EMAC
- default n
-
-config IBM_EMAC_ZMII
- bool
- depends on IBM_EMAC && (NP405H || NP405L || 44x)
- default y
-
-config IBM_EMAC_RGMII
- bool
- depends on IBM_EMAC && 440GX
- default y
-
-config IBM_EMAC_TAH
- bool
- depends on IBM_EMAC && 440GX
- default y
-
diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile
deleted file mode 100644
index f98ddf0e807..00000000000
--- a/drivers/net/ibm_emac/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the PowerPC 4xx on-chip ethernet driver
-#
-
-obj-$(CONFIG_IBM_EMAC) += ibm_emac.o
-
-ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
-ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o
-ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o
-ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o
-ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
deleted file mode 100644
index 97ed22bb432..00000000000
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac.h
- *
- * Register definitions for PowerPC 4xx on-chip ethernet contoller
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- * Matt Porter <mporter@kernel.crashing.org>
- * Armin Kuster <akuster@mvista.com>
- * Copyright 2002-2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#ifndef __IBM_EMAC_H_
-#define __IBM_EMAC_H_
-
-#include <linux/types.h>
-
-/* This is a simple check to prevent use of this driver on non-tested SoCs */
-#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \
- !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \
- !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE) && \
- !defined(CONFIG_440GR)
-#error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK"
-#endif
-
-/* EMAC registers Write Access rules */
-struct emac_regs {
- u32 mr0; /* special */
- u32 mr1; /* Reset */
- u32 tmr0; /* special */
- u32 tmr1; /* special */
- u32 rmr; /* Reset */
- u32 isr; /* Always */
- u32 iser; /* Reset */
- u32 iahr; /* Reset, R, T */
- u32 ialr; /* Reset, R, T */
- u32 vtpid; /* Reset, R, T */
- u32 vtci; /* Reset, R, T */
- u32 ptr; /* Reset, T */
- u32 iaht1; /* Reset, R */
- u32 iaht2; /* Reset, R */
- u32 iaht3; /* Reset, R */
- u32 iaht4; /* Reset, R */
- u32 gaht1; /* Reset, R */
- u32 gaht2; /* Reset, R */
- u32 gaht3; /* Reset, R */
- u32 gaht4; /* Reset, R */
- u32 lsah;
- u32 lsal;
- u32 ipgvr; /* Reset, T */
- u32 stacr; /* special */
- u32 trtr; /* special */
- u32 rwmr; /* Reset */
- u32 octx;
- u32 ocrx;
- u32 ipcr;
-};
-
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_ETHTOOL_REGS_VER 0
-#define EMAC_ETHTOOL_REGS_SIZE (sizeof(struct emac_regs) - sizeof(u32))
-#else
-#define EMAC_ETHTOOL_REGS_VER 1
-#define EMAC_ETHTOOL_REGS_SIZE sizeof(struct emac_regs)
-#endif
-
-/* EMACx_MR0 */
-#define EMAC_MR0_RXI 0x80000000
-#define EMAC_MR0_TXI 0x40000000
-#define EMAC_MR0_SRST 0x20000000
-#define EMAC_MR0_TXE 0x10000000
-#define EMAC_MR0_RXE 0x08000000
-#define EMAC_MR0_WKE 0x04000000
-
-/* EMACx_MR1 */
-#define EMAC_MR1_FDE 0x80000000
-#define EMAC_MR1_ILE 0x40000000
-#define EMAC_MR1_VLE 0x20000000
-#define EMAC_MR1_EIFC 0x10000000
-#define EMAC_MR1_APP 0x08000000
-#define EMAC_MR1_IST 0x01000000
-
-#define EMAC_MR1_MF_MASK 0x00c00000
-#define EMAC_MR1_MF_10 0x00000000
-#define EMAC_MR1_MF_100 0x00400000
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_MR1_MF_1000 0x00000000
-#define EMAC_MR1_MF_1000GPCS 0x00000000
-#define EMAC_MR1_MF_IPPA(id) 0x00000000
-#else
-#define EMAC_MR1_MF_1000 0x00800000
-#define EMAC_MR1_MF_1000GPCS 0x00c00000
-#define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6)
-#endif
-
-#define EMAC_TX_FIFO_SIZE 2048
-
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_MR1_RFS_4K 0x00300000
-#define EMAC_MR1_RFS_16K 0x00000000
-#define EMAC_RX_FIFO_SIZE(gige) 4096
-#define EMAC_MR1_TFS_2K 0x00080000
-#define EMAC_MR1_TR0_MULT 0x00008000
-#define EMAC_MR1_JPSM 0x00000000
-#define EMAC_MR1_MWSW_001 0x00000000
-#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT)
-#else
-#define EMAC_MR1_RFS_4K 0x00180000
-#define EMAC_MR1_RFS_16K 0x00280000
-#define EMAC_RX_FIFO_SIZE(gige) ((gige) ? 16384 : 4096)
-#define EMAC_MR1_TFS_2K 0x00020000
-#define EMAC_MR1_TR 0x00008000
-#define EMAC_MR1_MWSW_001 0x00001000
-#define EMAC_MR1_JPSM 0x00000800
-#define EMAC_MR1_OBCI_MASK 0x00000038
-#define EMAC_MR1_OBCI_50 0x00000000
-#define EMAC_MR1_OBCI_66 0x00000008
-#define EMAC_MR1_OBCI_83 0x00000010
-#define EMAC_MR1_OBCI_100 0x00000018
-#define EMAC_MR1_OBCI_100P 0x00000020
-#define EMAC_MR1_OBCI(freq) ((freq) <= 50 ? EMAC_MR1_OBCI_50 : \
- (freq) <= 66 ? EMAC_MR1_OBCI_66 : \
- (freq) <= 83 ? EMAC_MR1_OBCI_83 : \
- (freq) <= 100 ? EMAC_MR1_OBCI_100 : EMAC_MR1_OBCI_100P)
-#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR | \
- EMAC_MR1_OBCI(opb))
-#endif
-
-/* EMACx_TMR0 */
-#define EMAC_TMR0_GNP 0x80000000
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_TMR0_DEFAULT 0x00000000
-#else
-#define EMAC_TMR0_TFAE_2_32 0x00000001
-#define EMAC_TMR0_TFAE_4_64 0x00000002
-#define EMAC_TMR0_TFAE_8_128 0x00000003
-#define EMAC_TMR0_TFAE_16_256 0x00000004
-#define EMAC_TMR0_TFAE_32_512 0x00000005
-#define EMAC_TMR0_TFAE_64_1024 0x00000006
-#define EMAC_TMR0_TFAE_128_2048 0x00000007
-#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32
-#endif
-#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT)
-
-/* EMACx_TMR1 */
-
-/* IBM manuals are not very clear here.
- * This is my interpretation of how things are. --ebs
- */
-#if defined(CONFIG_40x)
-#define EMAC_FIFO_ENTRY_SIZE 8
-#define EMAC_MAL_BURST_SIZE (16 * 4)
-#else
-#define EMAC_FIFO_ENTRY_SIZE 16
-#define EMAC_MAL_BURST_SIZE (64 * 4)
-#endif
-
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16))
-#else
-#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14))
-#endif
-
-/* EMACx_RMR */
-#define EMAC_RMR_SP 0x80000000
-#define EMAC_RMR_SFCS 0x40000000
-#define EMAC_RMR_RRP 0x20000000
-#define EMAC_RMR_RFP 0x10000000
-#define EMAC_RMR_ROP 0x08000000
-#define EMAC_RMR_RPIR 0x04000000
-#define EMAC_RMR_PPP 0x02000000
-#define EMAC_RMR_PME 0x01000000
-#define EMAC_RMR_PMME 0x00800000
-#define EMAC_RMR_IAE 0x00400000
-#define EMAC_RMR_MIAE 0x00200000
-#define EMAC_RMR_BAE 0x00100000
-#define EMAC_RMR_MAE 0x00080000
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_RMR_BASE 0x00000000
-#else
-#define EMAC_RMR_RFAF_2_32 0x00000001
-#define EMAC_RMR_RFAF_4_64 0x00000002
-#define EMAC_RMR_RFAF_8_128 0x00000003
-#define EMAC_RMR_RFAF_16_256 0x00000004
-#define EMAC_RMR_RFAF_32_512 0x00000005
-#define EMAC_RMR_RFAF_64_1024 0x00000006
-#define EMAC_RMR_RFAF_128_2048 0x00000007
-#define EMAC_RMR_BASE EMAC_RMR_RFAF_128_2048
-#endif
-
-/* EMACx_ISR & EMACx_ISER */
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_ISR_TXPE 0x00000000
-#define EMAC_ISR_RXPE 0x00000000
-#define EMAC_ISR_TXUE 0x00000000
-#define EMAC_ISR_RXOE 0x00000000
-#else
-#define EMAC_ISR_TXPE 0x20000000
-#define EMAC_ISR_RXPE 0x10000000
-#define EMAC_ISR_TXUE 0x08000000
-#define EMAC_ISR_RXOE 0x04000000
-#endif
-#define EMAC_ISR_OVR 0x02000000
-#define EMAC_ISR_PP 0x01000000
-#define EMAC_ISR_BP 0x00800000
-#define EMAC_ISR_RP 0x00400000
-#define EMAC_ISR_SE 0x00200000
-#define EMAC_ISR_ALE 0x00100000
-#define EMAC_ISR_BFCS 0x00080000
-#define EMAC_ISR_PTLE 0x00040000
-#define EMAC_ISR_ORE 0x00020000
-#define EMAC_ISR_IRE 0x00010000
-#define EMAC_ISR_SQE 0x00000080
-#define EMAC_ISR_TE 0x00000040
-#define EMAC_ISR_MOS 0x00000002
-#define EMAC_ISR_MOF 0x00000001
-
-/* EMACx_STACR */
-#define EMAC_STACR_PHYD_MASK 0xffff
-#define EMAC_STACR_PHYD_SHIFT 16
-#define EMAC_STACR_OC 0x00008000
-#define EMAC_STACR_PHYE 0x00004000
-#define EMAC_STACR_STAC_MASK 0x00003000
-#define EMAC_STACR_STAC_READ 0x00001000
-#define EMAC_STACR_STAC_WRITE 0x00002000
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_STACR_OPBC_MASK 0x00000C00
-#define EMAC_STACR_OPBC_50 0x00000000
-#define EMAC_STACR_OPBC_66 0x00000400
-#define EMAC_STACR_OPBC_83 0x00000800
-#define EMAC_STACR_OPBC_100 0x00000C00
-#define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \
- (freq) <= 66 ? EMAC_STACR_OPBC_66 : \
- (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100)
-#define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb)
-#else
-#define EMAC_STACR_BASE(opb) 0x00000000
-#endif
-#define EMAC_STACR_PCDA_MASK 0x1f
-#define EMAC_STACR_PCDA_SHIFT 5
-#define EMAC_STACR_PRA_MASK 0x1f
-
-/*
- * For the 440SPe, AMCC inexplicably changed the polarity of
- * the "operation complete" bit in the MII control register.
- */
-#if defined(CONFIG_440SPE)
-static inline int emac_phy_done(u32 stacr)
-{
- return !(stacr & EMAC_STACR_OC);
-};
-#define EMAC_STACR_START EMAC_STACR_OC
-
-#else /* CONFIG_440SPE */
-static inline int emac_phy_done(u32 stacr)
-{
- return stacr & EMAC_STACR_OC;
-};
-#define EMAC_STACR_START 0
-#endif /* !CONFIG_440SPE */
-
-/* EMACx_TRTR */
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_TRTR_SHIFT 27
-#else
-#define EMAC_TRTR_SHIFT 24
-#endif
-#define EMAC_TRTR(size) ((((size) >> 6) - 1) << EMAC_TRTR_SHIFT)
-
-/* EMACx_RWMR */
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_RWMR(l,h) (((l) << 23) | ( ((h) & 0x1ff) << 7))
-#else
-#define EMAC_RWMR(l,h) (((l) << 22) | ( ((h) & 0x3ff) << 6))
-#endif
-
-/* EMAC specific TX descriptor control fields (write access) */
-#define EMAC_TX_CTRL_GFCS 0x0200
-#define EMAC_TX_CTRL_GP 0x0100
-#define EMAC_TX_CTRL_ISA 0x0080
-#define EMAC_TX_CTRL_RSA 0x0040
-#define EMAC_TX_CTRL_IVT 0x0020
-#define EMAC_TX_CTRL_RVT 0x0010
-#define EMAC_TX_CTRL_TAH_CSUM 0x000e
-
-/* EMAC specific TX descriptor status fields (read access) */
-#define EMAC_TX_ST_BFCS 0x0200
-#define EMAC_TX_ST_LCS 0x0080
-#define EMAC_TX_ST_ED 0x0040
-#define EMAC_TX_ST_EC 0x0020
-#define EMAC_TX_ST_LC 0x0010
-#define EMAC_TX_ST_MC 0x0008
-#define EMAC_TX_ST_SC 0x0004
-#define EMAC_TX_ST_UR 0x0002
-#define EMAC_TX_ST_SQE 0x0001
-#if !defined(CONFIG_IBM_EMAC_TAH)
-#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
- EMAC_TX_ST_EC | EMAC_TX_ST_LC | \
- EMAC_TX_ST_MC | EMAC_TX_ST_UR))
-#else
-#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
- EMAC_TX_ST_EC | EMAC_TX_ST_LC))
-#endif
-
-/* EMAC specific RX descriptor status fields (read access) */
-#define EMAC_RX_ST_OE 0x0200
-#define EMAC_RX_ST_PP 0x0100
-#define EMAC_RX_ST_BP 0x0080
-#define EMAC_RX_ST_RP 0x0040
-#define EMAC_RX_ST_SE 0x0020
-#define EMAC_RX_ST_AE 0x0010
-#define EMAC_RX_ST_BFCS 0x0008
-#define EMAC_RX_ST_PTL 0x0004
-#define EMAC_RX_ST_ORE 0x0002
-#define EMAC_RX_ST_IRE 0x0001
-#define EMAC_RX_TAH_BAD_CSUM 0x0003
-#define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \
- EMAC_RX_ST_RP | EMAC_RX_ST_SE | \
- EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \
- EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \
- EMAC_RX_ST_IRE )
-#endif /* __IBM_EMAC_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
deleted file mode 100644
index 73664f226f3..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ /dev/null
@@ -1,2263 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_core.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- * Matt Porter <mporter@kernel.crashing.org>
- * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * Armin Kuster <akuster@mvista.com>
- * Johnnie Peters <jpeters@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/crc32.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/bitops.h>
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/uaccess.h>
-#include <asm/ocp.h>
-
-#include "ibm_emac_core.h"
-#include "ibm_emac_debug.h"
-
-/*
- * Lack of dma_unmap_???? calls is intentional.
- *
- * API-correct usage requires additional support state information to be
- * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to
- * EMAC design (e.g. TX buffer passed from network stack can be split into
- * several BDs, dma_map_single/dma_map_page can be used to map particular BD),
- * maintaining such information will add additional overhead.
- * Current DMA API implementation for 4xx processors only ensures cache coherency
- * and dma_unmap_???? routines are empty and are likely to stay this way.
- * I decided to omit dma_unmap_??? calls because I don't want to add additional
- * complexity just for the sake of following some abstract API, when it doesn't
- * add any real benefit to the driver. I understand that this decision maybe
- * controversial, but I really tried to make code API-correct and efficient
- * at the same time and didn't come up with code I liked :(. --ebs
- */
-
-#define DRV_NAME "emac"
-#define DRV_VERSION "3.54"
-#define DRV_DESC "PPC 4xx OCP EMAC driver"
-
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_AUTHOR
- ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>");
-MODULE_LICENSE("GPL");
-
-/* minimum number of free TX descriptors required to wake up TX process */
-#define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4)
-
-/* If packet size is less than this number, we allocate small skb and copy packet
- * contents into it instead of just sending original big skb up
- */
-#define EMAC_RX_COPY_THRESH CONFIG_IBM_EMAC_RX_COPY_THRESHOLD
-
-/* Since multiple EMACs share MDIO lines in various ways, we need
- * to avoid re-using the same PHY ID in cases where the arch didn't
- * setup precise phy_map entries
- */
-static u32 busy_phy_map;
-
-#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && \
- (defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR))
-/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us
- * with PHY RX clock problem.
- * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX, which
- * also allows controlling each EMAC clock
- */
-static inline void EMAC_RX_CLK_TX(int idx)
-{
- unsigned long flags;
- local_irq_save(flags);
-
-#if defined(CONFIG_405EP)
- mtdcr(0xf3, mfdcr(0xf3) | (1 << idx));
-#else /* CONFIG_440EP || CONFIG_440GR */
- SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx));
-#endif
-
- local_irq_restore(flags);
-}
-
-static inline void EMAC_RX_CLK_DEFAULT(int idx)
-{
- unsigned long flags;
- local_irq_save(flags);
-
-#if defined(CONFIG_405EP)
- mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx));
-#else /* CONFIG_440EP */
- SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx));
-#endif
-
- local_irq_restore(flags);
-}
-#else
-#define EMAC_RX_CLK_TX(idx) ((void)0)
-#define EMAC_RX_CLK_DEFAULT(idx) ((void)0)
-#endif
-
-#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX)
-/* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS],
- * unfortunately this is less flexible than 440EP case, because it's a global
- * setting for all EMACs, therefore we do this clock trick only during probe.
- */
-#define EMAC_CLK_INTERNAL SDR_WRITE(DCRN_SDR_MFR, \
- SDR_READ(DCRN_SDR_MFR) | 0x08000000)
-#define EMAC_CLK_EXTERNAL SDR_WRITE(DCRN_SDR_MFR, \
- SDR_READ(DCRN_SDR_MFR) & ~0x08000000)
-#else
-#define EMAC_CLK_INTERNAL ((void)0)
-#define EMAC_CLK_EXTERNAL ((void)0)
-#endif
-
-/* I don't want to litter system log with timeout errors
- * when we have brain-damaged PHY.
- */
-static inline void emac_report_timeout_error(struct ocp_enet_private *dev,
- const char *error)
-{
-#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
- DBG("%d: %s" NL, dev->def->index, error);
-#else
- if (net_ratelimit())
- printk(KERN_ERR "emac%d: %s\n", dev->def->index, error);
-#endif
-}
-
-/* PHY polling intervals */
-#define PHY_POLL_LINK_ON HZ
-#define PHY_POLL_LINK_OFF (HZ / 5)
-
-/* Graceful stop timeouts in us.
- * We should allow up to 1 frame time (full-duplex, ignoring collisions)
- */
-#define STOP_TIMEOUT_10 1230
-#define STOP_TIMEOUT_100 124
-#define STOP_TIMEOUT_1000 13
-#define STOP_TIMEOUT_1000_JUMBO 73
-
-/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */
-static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = {
- "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum",
- "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom",
- "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu",
- "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet",
- "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error",
- "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range",
- "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun",
- "rx_bad_packet", "rx_runt_packet", "rx_short_event",
- "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long",
- "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors",
- "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral",
- "tx_bd_excessive_collisions", "tx_bd_late_collision",
- "tx_bd_multple_collisions", "tx_bd_single_collision",
- "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe",
- "tx_errors"
-};
-
-static irqreturn_t emac_irq(int irq, void *dev_instance);
-static void emac_clean_tx_ring(struct ocp_enet_private *dev);
-
-static inline int emac_phy_supports_gige(int phy_mode)
-{
- return phy_mode == PHY_MODE_GMII ||
- phy_mode == PHY_MODE_RGMII ||
- phy_mode == PHY_MODE_TBI ||
- phy_mode == PHY_MODE_RTBI;
-}
-
-static inline int emac_phy_gpcs(int phy_mode)
-{
- return phy_mode == PHY_MODE_TBI ||
- phy_mode == PHY_MODE_RTBI;
-}
-
-static inline void emac_tx_enable(struct ocp_enet_private *dev)
-{
- struct emac_regs __iomem *p = dev->emacp;
- unsigned long flags;
- u32 r;
-
- local_irq_save(flags);
-
- DBG("%d: tx_enable" NL, dev->def->index);
-
- r = in_be32(&p->mr0);
- if (!(r & EMAC_MR0_TXE))
- out_be32(&p->mr0, r | EMAC_MR0_TXE);
- local_irq_restore(flags);
-}
-
-static void emac_tx_disable(struct ocp_enet_private *dev)
-{
- struct emac_regs __iomem *p = dev->emacp;
- unsigned long flags;
- u32 r;
-
- local_irq_save(flags);
-
- DBG("%d: tx_disable" NL, dev->def->index);
-
- r = in_be32(&p->mr0);
- if (r & EMAC_MR0_TXE) {
- int n = dev->stop_timeout;
- out_be32(&p->mr0, r & ~EMAC_MR0_TXE);
- while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) {
- udelay(1);
- --n;
- }
- if (unlikely(!n))
- emac_report_timeout_error(dev, "TX disable timeout");
- }
- local_irq_restore(flags);
-}
-
-static void emac_rx_enable(struct ocp_enet_private *dev)
-{
- struct emac_regs __iomem *p = dev->emacp;
- unsigned long flags;
- u32 r;
-
- local_irq_save(flags);
- if (unlikely(dev->commac.rx_stopped))
- goto out;
-
- DBG("%d: rx_enable" NL, dev->def->index);
-
- r = in_be32(&p->mr0);
- if (!(r & EMAC_MR0_RXE)) {
- if (unlikely(!(r & EMAC_MR0_RXI))) {
- /* Wait if previous async disable is still in progress */
- int n = dev->stop_timeout;
- while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) {
- udelay(1);
- --n;
- }
- if (unlikely(!n))
- emac_report_timeout_error(dev,
- "RX disable timeout");
- }
- out_be32(&p->mr0, r | EMAC_MR0_RXE);
- }
- out:
- local_irq_restore(flags);
-}
-
-static void emac_rx_disable(struct ocp_enet_private *dev)
-{
- struct emac_regs __iomem *p = dev->emacp;
- unsigned long flags;
- u32 r;
-
- local_irq_save(flags);
-
- DBG("%d: rx_disable" NL, dev->def->index);
-
- r = in_be32(&p->mr0);
- if (r & EMAC_MR0_RXE) {
- int n = dev->stop_timeout;
- out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
- while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) {
- udelay(1);
- --n;
- }
- if (unlikely(!n))
- emac_report_timeout_error(dev, "RX disable timeout");
- }
- local_irq_restore(flags);
-}
-
-static inline void emac_rx_disable_async(struct ocp_enet_private *dev)
-{
- struct emac_regs __iomem *p = dev->emacp;
- unsigned long flags;
- u32 r;
-
- local_irq_save(flags);
-
- DBG("%d: rx_disable_async" NL, dev->def->index);
-
- r = in_be32(&p->mr0);
- if (r & EMAC_MR0_RXE)
- out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
- local_irq_restore(flags);
-}
-
-static int emac_reset(struct ocp_enet_private *dev)
-{
- struct emac_regs __iomem *p = dev->emacp;
- unsigned long flags;
- int n = 20;
-
- DBG("%d: reset" NL, dev->def->index);
-
- local_irq_save(flags);
-
- if (!dev->reset_failed) {
- /* 40x erratum suggests stopping RX channel before reset,
- * we stop TX as well
- */
- emac_rx_disable(dev);
- emac_tx_disable(dev);
- }
-
- out_be32(&p->mr0, EMAC_MR0_SRST);
- while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n)
- --n;
- local_irq_restore(flags);
-
- if (n) {
- dev->reset_failed = 0;
- return 0;
- } else {
- emac_report_timeout_error(dev, "reset timeout");
- dev->reset_failed = 1;
- return -ETIMEDOUT;
- }
-}
-
-static void emac_hash_mc(struct ocp_enet_private *dev)
-{
- struct emac_regs __iomem *p = dev->emacp;
- u16 gaht[4] = { 0 };
- struct dev_mc_list *dmi;
-
- DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count);
-
- for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) {
- int bit;
- DECLARE_MAC_BUF(mac);
- DBG2("%d: mc %s" NL,
- dev->def->index, print_mac(mac, dmi->dmi_addr));
-
- bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26);
- gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f);
- }
- out_be32(&p->gaht1, gaht[0]);
- out_be32(&p->gaht2, gaht[1]);
- out_be32(&p->gaht3, gaht[2]);
- out_be32(&p->gaht4, gaht[3]);
-}
-
-static inline u32 emac_iff2rmr(struct net_device *ndev)
-{
- u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE |
- EMAC_RMR_BASE;
-
- if (ndev->flags & IFF_PROMISC)
- r |= EMAC_RMR_PME;
- else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32)
- r |= EMAC_RMR_PMME;
- else if (ndev->mc_count > 0)
- r |= EMAC_RMR_MAE;
-
- return r;
-}
-
-static inline int emac_opb_mhz(void)
-{
- return (ocp_sys_info.opb_bus_freq + 500000) / 1000000;
-}
-
-/* BHs disabled */
-static int emac_configure(struct ocp_enet_private *dev)
-{
- struct emac_regs __iomem *p = dev->emacp;
- struct net_device *ndev = dev->ndev;
- int gige;
- u32 r;
-
- DBG("%d: configure" NL, dev->def->index);
-
- if (emac_reset(dev) < 0)
- return -ETIMEDOUT;
-
- tah_reset(dev->tah_dev);
-
- /* Mode register */
- r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST;
- if (dev->phy.duplex == DUPLEX_FULL)
- r |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001;
- dev->stop_timeout = STOP_TIMEOUT_10;
- switch (dev->phy.speed) {
- case SPEED_1000:
- if (emac_phy_gpcs(dev->phy.mode)) {
- r |= EMAC_MR1_MF_1000GPCS |
- EMAC_MR1_MF_IPPA(dev->phy.address);
-
- /* Put some arbitrary OUI, Manuf & Rev IDs so we can
- * identify this GPCS PHY later.
- */
- out_be32(&p->ipcr, 0xdeadbeef);
- } else
- r |= EMAC_MR1_MF_1000;
- r |= EMAC_MR1_RFS_16K;
- gige = 1;
-
- if (dev->ndev->mtu > ETH_DATA_LEN) {
- r |= EMAC_MR1_JPSM;
- dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO;
- } else
- dev->stop_timeout = STOP_TIMEOUT_1000;
- break;
- case SPEED_100:
- r |= EMAC_MR1_MF_100;
- dev->stop_timeout = STOP_TIMEOUT_100;
- /* Fall through */
- default:
- r |= EMAC_MR1_RFS_4K;
- gige = 0;
- break;
- }
-
- if (dev->rgmii_dev)
- rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input,
- dev->phy.speed);
- else
- zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed);
-
-#if !defined(CONFIG_40x)
- /* on 40x erratum forces us to NOT use integrated flow control,
- * let's hope it works on 44x ;)
- */
- if (dev->phy.duplex == DUPLEX_FULL) {
- if (dev->phy.pause)
- r |= EMAC_MR1_EIFC | EMAC_MR1_APP;
- else if (dev->phy.asym_pause)
- r |= EMAC_MR1_APP;
- }
-#endif
- out_be32(&p->mr1, r);
-
- /* Set individual MAC address */
- out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]);
- out_be32(&p->ialr, (ndev->dev_addr[2] << 24) |
- (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) |
- ndev->dev_addr[5]);
-
- /* VLAN Tag Protocol ID */
- out_be32(&p->vtpid, 0x8100);
-
- /* Receive mode register */
- r = emac_iff2rmr(ndev);
- if (r & EMAC_RMR_MAE)
- emac_hash_mc(dev);
- out_be32(&p->rmr, r);
-
- /* FIFOs thresholds */
- r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1,
- EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE);
- out_be32(&p->tmr1, r);
- out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2));
-
- /* PAUSE frame is sent when RX FIFO reaches its high-water mark,
- there should be still enough space in FIFO to allow the our link
- partner time to process this frame and also time to send PAUSE
- frame itself.
-
- Here is the worst case scenario for the RX FIFO "headroom"
- (from "The Switch Book") (100Mbps, without preamble, inter-frame gap):
-
- 1) One maximum-length frame on TX 1522 bytes
- 2) One PAUSE frame time 64 bytes
- 3) PAUSE frame decode time allowance 64 bytes
- 4) One maximum-length frame on RX 1522 bytes
- 5) Round-trip propagation delay of the link (100Mb) 15 bytes
- ----------
- 3187 bytes
-
- I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes)
- low-water mark to RX_FIFO_SIZE / 8 (512 bytes)
- */
- r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE,
- EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE);
- out_be32(&p->rwmr, r);
-
- /* Set PAUSE timer to the maximum */
- out_be32(&p->ptr, 0xffff);
-
- /* IRQ sources */
- out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE |
- EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE |
- EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE |
- EMAC_ISR_IRE | EMAC_ISR_TE);
-
- /* We need to take GPCS PHY out of isolate mode after EMAC reset */
- if (emac_phy_gpcs(dev->phy.mode))
- mii_reset_phy(&dev->phy);
-
- return 0;
-}
-
-/* BHs disabled */
-static void emac_reinitialize(struct ocp_enet_private *dev)
-{
- DBG("%d: reinitialize" NL, dev->def->index);
-
- if (!emac_configure(dev)) {
- emac_tx_enable(dev);
- emac_rx_enable(dev);
- }
-}
-
-/* BHs disabled */
-static void emac_full_tx_reset(struct net_device *ndev)
-{
- struct ocp_enet_private *dev = ndev->priv;
- struct ocp_func_emac_data *emacdata = dev->def->additions;
-
- DBG("%d: full_tx_reset" NL, dev->def->index);
-
- emac_tx_disable(dev);
- mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
- emac_clean_tx_ring(dev);
- dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0;
-
- emac_configure(dev);
-
- mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
- emac_tx_enable(dev);
- emac_rx_enable(dev);
-
- netif_wake_queue(ndev);
-}
-
-static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
-{
- struct emac_regs __iomem *p = dev->emacp;
- u32 r;
- int n;
-
- DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg);
-
- /* Enable proper MDIO port */
- zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
-
- /* Wait for management interface to become idle */
- n = 10;
- while (!emac_phy_done(in_be32(&p->stacr))) {
- udelay(1);
- if (!--n)
- goto to;
- }
-
- /* Issue read command */
- out_be32(&p->stacr,
- EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ |
- (reg & EMAC_STACR_PRA_MASK)
- | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT)
- | EMAC_STACR_START);
-
- /* Wait for read to complete */
- n = 100;
- while (!emac_phy_done(r = in_be32(&p->stacr))) {
- udelay(1);
- if (!--n)
- goto to;
- }
-
- if (unlikely(r & EMAC_STACR_PHYE)) {
- DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index,
- id, reg);
- return -EREMOTEIO;
- }
-
- r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK);
- DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r);
- return r;
- to:
- DBG("%d: MII management interface timeout (read)" NL, dev->def->index);
- return -ETIMEDOUT;
-}
-
-static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
- u16 val)
-{
- struct emac_regs __iomem *p = dev->emacp;
- int n;
-
- DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg,
- val);
-
- /* Enable proper MDIO port */
- zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
-
- /* Wait for management interface to be idle */
- n = 10;
- while (!emac_phy_done(in_be32(&p->stacr))) {
- udelay(1);
- if (!--n)
- goto to;
- }
-
- /* Issue write command */
- out_be32(&p->stacr,
- EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE |
- (reg & EMAC_STACR_PRA_MASK) |
- ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
- (val << EMAC_STACR_PHYD_SHIFT) | EMAC_STACR_START);
-
- /* Wait for write to complete */
- n = 100;
- while (!emac_phy_done(in_be32(&p->stacr))) {
- udelay(1);
- if (!--n)
- goto to;
- }
- return;
- to:
- DBG("%d: MII management interface timeout (write)" NL, dev->def->index);
-}
-
-static int emac_mdio_read(struct net_device *ndev, int id, int reg)
-{
- struct ocp_enet_private *dev = ndev->priv;
- int res;
-
- local_bh_disable();
- res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
- (u8) reg);
- local_bh_enable();
- return res;
-}
-
-static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val)
-{
- struct ocp_enet_private *dev = ndev->priv;
-
- local_bh_disable();
- __emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
- (u8) reg, (u16) val);
- local_bh_enable();
-}
-
-/* BHs disabled */
-static void emac_set_multicast_list(struct net_device *ndev)
-{
- struct ocp_enet_private *dev = ndev->priv;
- struct emac_regs __iomem *p = dev->emacp;
- u32 rmr = emac_iff2rmr(ndev);
-
- DBG("%d: multicast %08x" NL, dev->def->index, rmr);
- BUG_ON(!netif_running(dev->ndev));
-
- /* I decided to relax register access rules here to avoid
- * full EMAC reset.
- *
- * There is a real problem with EMAC4 core if we use MWSW_001 bit
- * in MR1 register and do a full EMAC reset.
- * One TX BD status update is delayed and, after EMAC reset, it
- * never happens, resulting in TX hung (it'll be recovered by TX
- * timeout handler eventually, but this is just gross).
- * So we either have to do full TX reset or try to cheat here :)
- *
- * The only required change is to RX mode register, so I *think* all
- * we need is just to stop RX channel. This seems to work on all
- * tested SoCs. --ebs
- */
- emac_rx_disable(dev);
- if (rmr & EMAC_RMR_MAE)
- emac_hash_mc(dev);
- out_be32(&p->rmr, rmr);
- emac_rx_enable(dev);
-}
-
-/* BHs disabled */
-static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu)
-{
- struct ocp_func_emac_data *emacdata = dev->def->additions;
- int rx_sync_size = emac_rx_sync_size(new_mtu);
- int rx_skb_size = emac_rx_skb_size(new_mtu);
- int i, ret = 0;
-
- emac_rx_disable(dev);
- mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
-
- if (dev->rx_sg_skb) {
- ++dev->estats.rx_dropped_resize;
- dev_kfree_skb(dev->rx_sg_skb);
- dev->rx_sg_skb = NULL;
- }
-
- /* Make a first pass over RX ring and mark BDs ready, dropping
- * non-processed packets on the way. We need this as a separate pass
- * to simplify error recovery in the case of allocation failure later.
- */
- for (i = 0; i < NUM_RX_BUFF; ++i) {
- if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST)
- ++dev->estats.rx_dropped_resize;
-
- dev->rx_desc[i].data_len = 0;
- dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY |
- (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
- }
-
- /* Reallocate RX ring only if bigger skb buffers are required */
- if (rx_skb_size <= dev->rx_skb_size)
- goto skip;
-
- /* Second pass, allocate new skbs */
- for (i = 0; i < NUM_RX_BUFF; ++i) {
- struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC);
- if (!skb) {
- ret = -ENOMEM;
- goto oom;
- }
-
- BUG_ON(!dev->rx_skb[i]);
- dev_kfree_skb(dev->rx_skb[i]);
-
- skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
- dev->rx_desc[i].data_ptr =
- dma_map_single(dev->ldev, skb->data - 2, rx_sync_size,
- DMA_FROM_DEVICE) + 2;
- dev->rx_skb[i] = skb;
- }
- skip:
- /* Check if we need to change "Jumbo" bit in MR1 */
- if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) {
- /* This is to prevent starting RX channel in emac_rx_enable() */
- dev->commac.rx_stopped = 1;
-
- dev->ndev->mtu = new_mtu;
- emac_full_tx_reset(dev->ndev);
- }
-
- mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu));
- oom:
- /* Restart RX */
- dev->commac.rx_stopped = dev->rx_slot = 0;
- mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
- emac_rx_enable(dev);
-
- return ret;
-}
-
-/* Process ctx, rtnl_lock semaphore */
-static int emac_change_mtu(struct net_device *ndev, int new_mtu)
-{
- struct ocp_enet_private *dev = ndev->priv;
- int ret = 0;
-
- if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU)
- return -EINVAL;
-
- DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu);
-
- local_bh_disable();
- if (netif_running(ndev)) {
- /* Check if we really need to reinitalize RX ring */
- if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
- ret = emac_resize_rx_ring(dev, new_mtu);
- }
-
- if (!ret) {
- ndev->mtu = new_mtu;
- dev->rx_skb_size = emac_rx_skb_size(new_mtu);
- dev->rx_sync_size = emac_rx_sync_size(new_mtu);
- }
- local_bh_enable();
-
- return ret;
-}
-
-static void emac_clean_tx_ring(struct ocp_enet_private *dev)
-{
- int i;
- for (i = 0; i < NUM_TX_BUFF; ++i) {
- if (dev->tx_skb[i]) {
- dev_kfree_skb(dev->tx_skb[i]);
- dev->tx_skb[i] = NULL;
- if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY)
- ++dev->estats.tx_dropped;
- }
- dev->tx_desc[i].ctrl = 0;
- dev->tx_desc[i].data_ptr = 0;
- }
-}
-
-static void emac_clean_rx_ring(struct ocp_enet_private *dev)
-{
- int i;
- for (i = 0; i < NUM_RX_BUFF; ++i)
- if (dev->rx_skb[i]) {
- dev->rx_desc[i].ctrl = 0;
- dev_kfree_skb(dev->rx_skb[i]);
- dev->rx_skb[i] = NULL;
- dev->rx_desc[i].data_ptr = 0;
- }
-
- if (dev->rx_sg_skb) {
- dev_kfree_skb(dev->rx_sg_skb);
- dev->rx_sg_skb = NULL;
- }
-}
-
-static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot,
- gfp_t flags)
-{
- struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags);
- if (unlikely(!skb))
- return -ENOMEM;
-
- dev->rx_skb[slot] = skb;
- dev->rx_desc[slot].data_len = 0;
-
- skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
- dev->rx_desc[slot].data_ptr =
- dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size,
- DMA_FROM_DEVICE) + 2;
- barrier();
- dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
- (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
-
- return 0;
-}
-
-static void emac_print_link_status(struct ocp_enet_private *dev)
-{
- if (netif_carrier_ok(dev->ndev))
- printk(KERN_INFO "%s: link is up, %d %s%s\n",
- dev->ndev->name, dev->phy.speed,
- dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX",
- dev->phy.pause ? ", pause enabled" :
- dev->phy.asym_pause ? ", assymetric pause enabled" : "");
- else
- printk(KERN_INFO "%s: link is down\n", dev->ndev->name);
-}
-
-/* Process ctx, rtnl_lock semaphore */
-static int emac_open(struct net_device *ndev)
-{
- struct ocp_enet_private *dev = ndev->priv;
- struct ocp_func_emac_data *emacdata = dev->def->additions;
- int err, i;
-
- DBG("%d: open" NL, dev->def->index);
-
- /* Setup error IRQ handler */
- err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev);
- if (err) {
- printk(KERN_ERR "%s: failed to request IRQ %d\n",
- ndev->name, dev->def->irq);
- return err;
- }
-
- /* Allocate RX ring */
- for (i = 0; i < NUM_RX_BUFF; ++i)
- if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) {
- printk(KERN_ERR "%s: failed to allocate RX ring\n",
- ndev->name);
- goto oom;
- }
-
- local_bh_disable();
- dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot =
- dev->commac.rx_stopped = 0;
- dev->rx_sg_skb = NULL;
-
- if (dev->phy.address >= 0) {
- int link_poll_interval;
- if (dev->phy.def->ops->poll_link(&dev->phy)) {
- dev->phy.def->ops->read_link(&dev->phy);
- EMAC_RX_CLK_DEFAULT(dev->def->index);
- netif_carrier_on(dev->ndev);
- link_poll_interval = PHY_POLL_LINK_ON;
- } else {
- EMAC_RX_CLK_TX(dev->def->index);
- netif_carrier_off(dev->ndev);
- link_poll_interval = PHY_POLL_LINK_OFF;
- }
- mod_timer(&dev->link_timer, jiffies + link_poll_interval);
- emac_print_link_status(dev);
- } else
- netif_carrier_on(dev->ndev);
-
- emac_configure(dev);
- mal_poll_add(dev->mal, &dev->commac);
- mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
- mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu));
- mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
- emac_tx_enable(dev);
- emac_rx_enable(dev);
- netif_start_queue(ndev);
- local_bh_enable();
-
- return 0;
- oom:
- emac_clean_rx_ring(dev);
- free_irq(dev->def->irq, dev);
- return -ENOMEM;
-}
-
-/* BHs disabled */
-static int emac_link_differs(struct ocp_enet_private *dev)
-{
- u32 r = in_be32(&dev->emacp->mr1);
-
- int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF;
- int speed, pause, asym_pause;
-
- if (r & EMAC_MR1_MF_1000)
- speed = SPEED_1000;
- else if (r & EMAC_MR1_MF_100)
- speed = SPEED_100;
- else
- speed = SPEED_10;
-
- switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) {
- case (EMAC_MR1_EIFC | EMAC_MR1_APP):
- pause = 1;
- asym_pause = 0;
- break;
- case EMAC_MR1_APP:
- pause = 0;
- asym_pause = 1;
- break;
- default:
- pause = asym_pause = 0;
- }
- return speed != dev->phy.speed || duplex != dev->phy.duplex ||
- pause != dev->phy.pause || asym_pause != dev->phy.asym_pause;
-}
-
-/* BHs disabled */
-static void emac_link_timer(unsigned long data)
-{
- struct ocp_enet_private *dev = (struct ocp_enet_private *)data;
- int link_poll_interval;
-
- DBG2("%d: link timer" NL, dev->def->index);
-
- if (dev->phy.def->ops->poll_link(&dev->phy)) {
- if (!netif_carrier_ok(dev->ndev)) {
- EMAC_RX_CLK_DEFAULT(dev->def->index);
-
- /* Get new link parameters */
- dev->phy.def->ops->read_link(&dev->phy);
-
- if (dev->tah_dev || emac_link_differs(dev))
- emac_full_tx_reset(dev->ndev);
-
- netif_carrier_on(dev->ndev);
- emac_print_link_status(dev);
- }
- link_poll_interval = PHY_POLL_LINK_ON;
- } else {
- if (netif_carrier_ok(dev->ndev)) {
- EMAC_RX_CLK_TX(dev->def->index);
-#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
- emac_reinitialize(dev);
-#endif
- netif_carrier_off(dev->ndev);
- emac_print_link_status(dev);
- }
-
- /* Retry reset if the previous attempt failed.
- * This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX
- * case, but I left it here because it shouldn't trigger for
- * sane PHYs anyway.
- */
- if (unlikely(dev->reset_failed))
- emac_reinitialize(dev);
-
- link_poll_interval = PHY_POLL_LINK_OFF;
- }
- mod_timer(&dev->link_timer, jiffies + link_poll_interval);
-}
-
-/* BHs disabled */
-static void emac_force_link_update(struct ocp_enet_private *dev)
-{
- netif_carrier_off(dev->ndev);
- if (timer_pending(&dev->link_timer))
- mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF);
-}
-
-/* Process ctx, rtnl_lock semaphore */
-static int emac_close(struct net_device *ndev)
-{
- struct ocp_enet_private *dev = ndev->priv;
- struct ocp_func_emac_data *emacdata = dev->def->additions;
-
- DBG("%d: close" NL, dev->def->index);
-
- local_bh_disable();
-
- if (dev->phy.address >= 0)
- del_timer_sync(&dev->link_timer);
-
- netif_stop_queue(ndev);
- emac_rx_disable(dev);
- emac_tx_disable(dev);
- mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
- mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
- mal_poll_del(dev->mal, &dev->commac);
- local_bh_enable();
-
- emac_clean_tx_ring(dev);
- emac_clean_rx_ring(dev);
- free_irq(dev->def->irq, dev);
-
- return 0;
-}
-
-static inline u16 emac_tx_csum(struct ocp_enet_private *dev,
- struct sk_buff *skb)
-{
-#if defined(CONFIG_IBM_EMAC_TAH)
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- ++dev->stats.tx_packets_csum;
- return EMAC_TX_CTRL_TAH_CSUM;
- }
-#endif
- return 0;
-}
-
-static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len)
-{
- struct emac_regs __iomem *p = dev->emacp;
- struct net_device *ndev = dev->ndev;
-
- /* Send the packet out */
- out_be32(&p->tmr0, EMAC_TMR0_XMIT);
-
- if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) {
- netif_stop_queue(ndev);
- DBG2("%d: stopped TX queue" NL, dev->def->index);
- }
-
- ndev->trans_start = jiffies;
- ++dev->stats.tx_packets;
- dev->stats.tx_bytes += len;
-
- return 0;
-}
-
-/* BHs disabled */
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
-{
- struct ocp_enet_private *dev = ndev->priv;
- unsigned int len = skb->len;
- int slot;
-
- u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
- MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb);
-
- slot = dev->tx_slot++;
- if (dev->tx_slot == NUM_TX_BUFF) {
- dev->tx_slot = 0;
- ctrl |= MAL_TX_CTRL_WRAP;
- }
-
- DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot);
-
- dev->tx_skb[slot] = skb;
- dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len,
- DMA_TO_DEVICE);
- dev->tx_desc[slot].data_len = (u16) len;
- barrier();
- dev->tx_desc[slot].ctrl = ctrl;
-
- return emac_xmit_finish(dev, len);
-}
-
-#if defined(CONFIG_IBM_EMAC_TAH)
-static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot,
- u32 pd, int len, int last, u16 base_ctrl)
-{
- while (1) {
- u16 ctrl = base_ctrl;
- int chunk = min(len, MAL_MAX_TX_SIZE);
- len -= chunk;
-
- slot = (slot + 1) % NUM_TX_BUFF;
-
- if (last && !len)
- ctrl |= MAL_TX_CTRL_LAST;
- if (slot == NUM_TX_BUFF - 1)
- ctrl |= MAL_TX_CTRL_WRAP;
-
- dev->tx_skb[slot] = NULL;
- dev->tx_desc[slot].data_ptr = pd;
- dev->tx_desc[slot].data_len = (u16) chunk;
- dev->tx_desc[slot].ctrl = ctrl;
- ++dev->tx_cnt;
-
- if (!len)
- break;
-
- pd += chunk;
- }
- return slot;
-}
-
-/* BHs disabled (SG version for TAH equipped EMACs) */
-static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
-{
- struct ocp_enet_private *dev = ndev->priv;
- int nr_frags = skb_shinfo(skb)->nr_frags;
- int len = skb->len, chunk;
- int slot, i;
- u16 ctrl;
- u32 pd;
-
- /* This is common "fast" path */
- if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE))
- return emac_start_xmit(skb, ndev);
-
- len -= skb->data_len;
-
- /* Note, this is only an *estimation*, we can still run out of empty
- * slots because of the additional fragmentation into
- * MAL_MAX_TX_SIZE-sized chunks
- */
- if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF))
- goto stop_queue;
-
- ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
- emac_tx_csum(dev, skb);
- slot = dev->tx_slot;
-
- /* skb data */
- dev->tx_skb[slot] = NULL;
- chunk = min(len, MAL_MAX_TX_SIZE);
- dev->tx_desc[slot].data_ptr = pd =
- dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE);
- dev->tx_desc[slot].data_len = (u16) chunk;
- len -= chunk;
- if (unlikely(len))
- slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags,
- ctrl);
- /* skb fragments */
- for (i = 0; i < nr_frags; ++i) {
- struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
- len = frag->size;
-
- if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF))
- goto undo_frame;
-
- pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len,
- DMA_TO_DEVICE);
-
- slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1,
- ctrl);
- }
-
- DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len,
- dev->tx_slot, slot);
-
- /* Attach skb to the last slot so we don't release it too early */
- dev->tx_skb[slot] = skb;
-
- /* Send the packet out */
- if (dev->tx_slot == NUM_TX_BUFF - 1)
- ctrl |= MAL_TX_CTRL_WRAP;
- barrier();
- dev->tx_desc[dev->tx_slot].ctrl = ctrl;
- dev->tx_slot = (slot + 1) % NUM_TX_BUFF;
-
- return emac_xmit_finish(dev, skb->len);
-
- undo_frame:
- /* Well, too bad. Our previous estimation was overly optimistic.
- * Undo everything.
- */
- while (slot != dev->tx_slot) {
- dev->tx_desc[slot].ctrl = 0;
- --dev->tx_cnt;
- if (--slot < 0)
- slot = NUM_TX_BUFF - 1;
- }
- ++dev->estats.tx_undo;
-
- stop_queue:
- netif_stop_queue(ndev);
- DBG2("%d: stopped TX queue" NL, dev->def->index);
- return 1;
-}
-#else
-# define emac_start_xmit_sg emac_start_xmit
-#endif /* !defined(CONFIG_IBM_EMAC_TAH) */
-
-/* BHs disabled */
-static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl)
-{
- struct ibm_emac_error_stats *st = &dev->estats;
- DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl);
-
- ++st->tx_bd_errors;
- if (ctrl & EMAC_TX_ST_BFCS)
- ++st->tx_bd_bad_fcs;
- if (ctrl & EMAC_TX_ST_LCS)
- ++st->tx_bd_carrier_loss;
- if (ctrl & EMAC_TX_ST_ED)
- ++st->tx_bd_excessive_deferral;
- if (ctrl & EMAC_TX_ST_EC)
- ++st->tx_bd_excessive_collisions;
- if (ctrl & EMAC_TX_ST_LC)
- ++st->tx_bd_late_collision;
- if (ctrl & EMAC_TX_ST_MC)
- ++st->tx_bd_multple_collisions;
- if (ctrl & EMAC_TX_ST_SC)
- ++st->tx_bd_single_collision;
- if (ctrl & EMAC_TX_ST_UR)
- ++st->tx_bd_underrun;
- if (ctrl & EMAC_TX_ST_SQE)
- ++st->tx_bd_sqe;
-}
-
-static void emac_poll_tx(void *param)
-{
- struct ocp_enet_private *dev = param;
- DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt,
- dev->ack_slot);
-
- if (dev->tx_cnt) {
- u16 ctrl;
- int slot = dev->ack_slot, n = 0;
- again:
- ctrl = dev->tx_desc[slot].ctrl;
- if (!(ctrl & MAL_TX_CTRL_READY)) {
- struct sk_buff *skb = dev->tx_skb[slot];
- ++n;
-
- if (skb) {
- dev_kfree_skb(skb);
- dev->tx_skb[slot] = NULL;
- }
- slot = (slot + 1) % NUM_TX_BUFF;
-
- if (unlikely(EMAC_IS_BAD_TX(ctrl)))
- emac_parse_tx_error(dev, ctrl);
-
- if (--dev->tx_cnt)
- goto again;
- }
- if (n) {
- dev->ack_slot = slot;
- if (netif_queue_stopped(dev->ndev) &&
- dev->tx_cnt < EMAC_TX_WAKEUP_THRESH)
- netif_wake_queue(dev->ndev);
-
- DBG2("%d: tx %d pkts" NL, dev->def->index, n);
- }
- }
-}
-
-static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot,
- int len)
-{
- struct sk_buff *skb = dev->rx_skb[slot];
- DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len);
-
- if (len)
- dma_map_single(dev->ldev, skb->data - 2,
- EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE);
-
- dev->rx_desc[slot].data_len = 0;
- barrier();
- dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
- (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
-}
-
-static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl)
-{
- struct ibm_emac_error_stats *st = &dev->estats;
- DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl);
-
- ++st->rx_bd_errors;
- if (ctrl & EMAC_RX_ST_OE)
- ++st->rx_bd_overrun;
- if (ctrl & EMAC_RX_ST_BP)
- ++st->rx_bd_bad_packet;
- if (ctrl & EMAC_RX_ST_RP)
- ++st->rx_bd_runt_packet;
- if (ctrl & EMAC_RX_ST_SE)
- ++st->rx_bd_short_event;
- if (ctrl & EMAC_RX_ST_AE)
- ++st->rx_bd_alignment_error;
- if (ctrl & EMAC_RX_ST_BFCS)
- ++st->rx_bd_bad_fcs;
- if (ctrl & EMAC_RX_ST_PTL)
- ++st->rx_bd_packet_too_long;
- if (ctrl & EMAC_RX_ST_ORE)
- ++st->rx_bd_out_of_range;
- if (ctrl & EMAC_RX_ST_IRE)
- ++st->rx_bd_in_range;
-}
-
-static inline void emac_rx_csum(struct ocp_enet_private *dev,
- struct sk_buff *skb, u16 ctrl)
-{
-#if defined(CONFIG_IBM_EMAC_TAH)
- if (!ctrl && dev->tah_dev) {
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- ++dev->stats.rx_packets_csum;
- }
-#endif
-}
-
-static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot)
-{
- if (likely(dev->rx_sg_skb != NULL)) {
- int len = dev->rx_desc[slot].data_len;
- int tot_len = dev->rx_sg_skb->len + len;
-
- if (unlikely(tot_len + 2 > dev->rx_skb_size)) {
- ++dev->estats.rx_dropped_mtu;
- dev_kfree_skb(dev->rx_sg_skb);
- dev->rx_sg_skb = NULL;
- } else {
- cacheable_memcpy(skb_tail_pointer(dev->rx_sg_skb),
- dev->rx_skb[slot]->data, len);
- skb_put(dev->rx_sg_skb, len);
- emac_recycle_rx_skb(dev, slot, len);
- return 0;
- }
- }
- emac_recycle_rx_skb(dev, slot, 0);
- return -1;
-}
-
-/* BHs disabled */
-static int emac_poll_rx(void *param, int budget)
-{
- struct ocp_enet_private *dev = param;
- int slot = dev->rx_slot, received = 0;
-
- DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget);
-
- again:
- while (budget > 0) {
- int len;
- struct sk_buff *skb;
- u16 ctrl = dev->rx_desc[slot].ctrl;
-
- if (ctrl & MAL_RX_CTRL_EMPTY)
- break;
-
- skb = dev->rx_skb[slot];
- barrier();
- len = dev->rx_desc[slot].data_len;
-
- if (unlikely(!MAL_IS_SINGLE_RX(ctrl)))
- goto sg;
-
- ctrl &= EMAC_BAD_RX_MASK;
- if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
- emac_parse_rx_error(dev, ctrl);
- ++dev->estats.rx_dropped_error;
- emac_recycle_rx_skb(dev, slot, 0);
- len = 0;
- goto next;
- }
-
- if (len && len < EMAC_RX_COPY_THRESH) {
- struct sk_buff *copy_skb =
- alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
- if (unlikely(!copy_skb))
- goto oom;
-
- skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2);
- cacheable_memcpy(copy_skb->data - 2, skb->data - 2,
- len + 2);
- emac_recycle_rx_skb(dev, slot, len);
- skb = copy_skb;
- } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC)))
- goto oom;
-
- skb_put(skb, len);
- push_packet:
- skb->protocol = eth_type_trans(skb, dev->ndev);
- emac_rx_csum(dev, skb, ctrl);
-
- if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
- ++dev->estats.rx_dropped_stack;
- next:
- ++dev->stats.rx_packets;
- skip:
- dev->stats.rx_bytes += len;
- slot = (slot + 1) % NUM_RX_BUFF;
- --budget;
- ++received;
- continue;
- sg:
- if (ctrl & MAL_RX_CTRL_FIRST) {
- BUG_ON(dev->rx_sg_skb);
- if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) {
- DBG("%d: rx OOM %d" NL, dev->def->index, slot);
- ++dev->estats.rx_dropped_oom;
- emac_recycle_rx_skb(dev, slot, 0);
- } else {
- dev->rx_sg_skb = skb;
- skb_put(skb, len);
- }
- } else if (!emac_rx_sg_append(dev, slot) &&
- (ctrl & MAL_RX_CTRL_LAST)) {
-
- skb = dev->rx_sg_skb;
- dev->rx_sg_skb = NULL;
-
- ctrl &= EMAC_BAD_RX_MASK;
- if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
- emac_parse_rx_error(dev, ctrl);
- ++dev->estats.rx_dropped_error;
- dev_kfree_skb(skb);
- len = 0;
- } else
- goto push_packet;
- }
- goto skip;
- oom:
- DBG("%d: rx OOM %d" NL, dev->def->index, slot);
- /* Drop the packet and recycle skb */
- ++dev->estats.rx_dropped_oom;
- emac_recycle_rx_skb(dev, slot, 0);
- goto next;
- }
-
- if (received) {
- DBG2("%d: rx %d BDs" NL, dev->def->index, received);
- dev->rx_slot = slot;
- }
-
- if (unlikely(budget && dev->commac.rx_stopped)) {
- struct ocp_func_emac_data *emacdata = dev->def->additions;
-
- barrier();
- if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) {
- DBG2("%d: rx restart" NL, dev->def->index);
- received = 0;
- goto again;
- }
-
- if (dev->rx_sg_skb) {
- DBG2("%d: dropping partial rx packet" NL,
- dev->def->index);
- ++dev->estats.rx_dropped_error;
- dev_kfree_skb(dev->rx_sg_skb);
- dev->rx_sg_skb = NULL;
- }
-
- dev->commac.rx_stopped = 0;
- mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
- emac_rx_enable(dev);
- dev->rx_slot = 0;
- }
- return received;
-}
-
-/* BHs disabled */
-static int emac_peek_rx(void *param)
-{
- struct ocp_enet_private *dev = param;
- return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY);
-}
-
-/* BHs disabled */
-static int emac_peek_rx_sg(void *param)
-{
- struct ocp_enet_private *dev = param;
- int slot = dev->rx_slot;
- while (1) {
- u16 ctrl = dev->rx_desc[slot].ctrl;
- if (ctrl & MAL_RX_CTRL_EMPTY)
- return 0;
- else if (ctrl & MAL_RX_CTRL_LAST)
- return 1;
-
- slot = (slot + 1) % NUM_RX_BUFF;
-
- /* I'm just being paranoid here :) */
- if (unlikely(slot == dev->rx_slot))
- return 0;
- }
-}
-
-/* Hard IRQ */
-static void emac_rxde(void *param)
-{
- struct ocp_enet_private *dev = param;
- ++dev->estats.rx_stopped;
- emac_rx_disable_async(dev);
-}
-
-/* Hard IRQ */
-static irqreturn_t emac_irq(int irq, void *dev_instance)
-{
- struct ocp_enet_private *dev = dev_instance;
- struct emac_regs __iomem *p = dev->emacp;
- struct ibm_emac_error_stats *st = &dev->estats;
-
- u32 isr = in_be32(&p->isr);
- out_be32(&p->isr, isr);
-
- DBG("%d: isr = %08x" NL, dev->def->index, isr);
-
- if (isr & EMAC_ISR_TXPE)
- ++st->tx_parity;
- if (isr & EMAC_ISR_RXPE)
- ++st->rx_parity;
- if (isr & EMAC_ISR_TXUE)
- ++st->tx_underrun;
- if (isr & EMAC_ISR_RXOE)
- ++st->rx_fifo_overrun;
- if (isr & EMAC_ISR_OVR)
- ++st->rx_overrun;
- if (isr & EMAC_ISR_BP)
- ++st->rx_bad_packet;
- if (isr & EMAC_ISR_RP)
- ++st->rx_runt_packet;
- if (isr & EMAC_ISR_SE)
- ++st->rx_short_event;
- if (isr & EMAC_ISR_ALE)
- ++st->rx_alignment_error;
- if (isr & EMAC_ISR_BFCS)
- ++st->rx_bad_fcs;
- if (isr & EMAC_ISR_PTLE)
- ++st->rx_packet_too_long;
- if (isr & EMAC_ISR_ORE)
- ++st->rx_out_of_range;
- if (isr & EMAC_ISR_IRE)
- ++st->rx_in_range;
- if (isr & EMAC_ISR_SQE)
- ++st->tx_sqe;
- if (isr & EMAC_ISR_TE)
- ++st->tx_errors;
-
- return IRQ_HANDLED;
-}
-
-static struct net_device_stats *emac_stats(struct net_device *ndev)
-{
- struct ocp_enet_private *dev = ndev->priv;
- struct ibm_emac_stats *st = &dev->stats;
- struct ibm_emac_error_stats *est = &dev->estats;
- struct net_device_stats *nst = &dev->nstats;
-
- DBG2("%d: stats" NL, dev->def->index);
-
- /* Compute "legacy" statistics */
- local_irq_disable();
- nst->rx_packets = (unsigned long)st->rx_packets;
- nst->rx_bytes = (unsigned long)st->rx_bytes;
- nst->tx_packets = (unsigned long)st->tx_packets;
- nst->tx_bytes = (unsigned long)st->tx_bytes;
- nst->rx_dropped = (unsigned long)(est->rx_dropped_oom +
- est->rx_dropped_error +
- est->rx_dropped_resize +
- est->rx_dropped_mtu);
- nst->tx_dropped = (unsigned long)est->tx_dropped;
-
- nst->rx_errors = (unsigned long)est->rx_bd_errors;
- nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun +
- est->rx_fifo_overrun +
- est->rx_overrun);
- nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error +
- est->rx_alignment_error);
- nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs +
- est->rx_bad_fcs);
- nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet +
- est->rx_bd_short_event +
- est->rx_bd_packet_too_long +
- est->rx_bd_out_of_range +
- est->rx_bd_in_range +
- est->rx_runt_packet +
- est->rx_short_event +
- est->rx_packet_too_long +
- est->rx_out_of_range +
- est->rx_in_range);
-
- nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors);
- nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun +
- est->tx_underrun);
- nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss;
- nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral +
- est->tx_bd_excessive_collisions +
- est->tx_bd_late_collision +
- est->tx_bd_multple_collisions);
- local_irq_enable();
- return nst;
-}
-
-static void emac_remove(struct ocp_device *ocpdev)
-{
- struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev);
-
- DBG("%d: remove" NL, dev->def->index);
-
- ocp_set_drvdata(ocpdev, NULL);
- unregister_netdev(dev->ndev);
-
- tah_fini(dev->tah_dev);
- rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
- zmii_fini(dev->zmii_dev, dev->zmii_input);
-
- emac_dbg_register(dev->def->index, NULL);
-
- mal_unregister_commac(dev->mal, &dev->commac);
- iounmap(dev->emacp);
- kfree(dev->ndev);
-}
-
-static struct mal_commac_ops emac_commac_ops = {
- .poll_tx = &emac_poll_tx,
- .poll_rx = &emac_poll_rx,
- .peek_rx = &emac_peek_rx,
- .rxde = &emac_rxde,
-};
-
-static struct mal_commac_ops emac_commac_sg_ops = {
- .poll_tx = &emac_poll_tx,
- .poll_rx = &emac_poll_rx,
- .peek_rx = &emac_peek_rx_sg,
- .rxde = &emac_rxde,
-};
-
-/* Ethtool support */
-static int emac_ethtool_get_settings(struct net_device *ndev,
- struct ethtool_cmd *cmd)
-{
- struct ocp_enet_private *dev = ndev->priv;
-
- cmd->supported = dev->phy.features;
- cmd->port = PORT_MII;
- cmd->phy_address = dev->phy.address;
- cmd->transceiver =
- dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL;
-
- local_bh_disable();
- cmd->advertising = dev->phy.advertising;
- cmd->autoneg = dev->phy.autoneg;
- cmd->speed = dev->phy.speed;
- cmd->duplex = dev->phy.duplex;
- local_bh_enable();
-
- return 0;
-}
-
-static int emac_ethtool_set_settings(struct net_device *ndev,
- struct ethtool_cmd *cmd)
-{
- struct ocp_enet_private *dev = ndev->priv;
- u32 f = dev->phy.features;
-
- DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index,
- cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising);
-
- /* Basic sanity checks */
- if (dev->phy.address < 0)
- return -EOPNOTSUPP;
- if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
- return -EINVAL;
- if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
- return -EINVAL;
- if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
- return -EINVAL;
-
- if (cmd->autoneg == AUTONEG_DISABLE) {
- switch (cmd->speed) {
- case SPEED_10:
- if (cmd->duplex == DUPLEX_HALF
- && !(f & SUPPORTED_10baseT_Half))
- return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL
- && !(f & SUPPORTED_10baseT_Full))
- return -EINVAL;
- break;
- case SPEED_100:
- if (cmd->duplex == DUPLEX_HALF
- && !(f & SUPPORTED_100baseT_Half))
- return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL
- && !(f & SUPPORTED_100baseT_Full))
- return -EINVAL;
- break;
- case SPEED_1000:
- if (cmd->duplex == DUPLEX_HALF
- && !(f & SUPPORTED_1000baseT_Half))
- return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL
- && !(f & SUPPORTED_1000baseT_Full))
- return -EINVAL;
- break;
- default:
- return -EINVAL;
- }
-
- local_bh_disable();
- dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed,
- cmd->duplex);
-
- } else {
- if (!(f & SUPPORTED_Autoneg))
- return -EINVAL;
-
- local_bh_disable();
- dev->phy.def->ops->setup_aneg(&dev->phy,
- (cmd->advertising & f) |
- (dev->phy.advertising &
- (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause)));
- }
- emac_force_link_update(dev);
- local_bh_enable();
-
- return 0;
-}
-
-static void emac_ethtool_get_ringparam(struct net_device *ndev,
- struct ethtool_ringparam *rp)
-{
- rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF;
- rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF;
-}
-
-static void emac_ethtool_get_pauseparam(struct net_device *ndev,
- struct ethtool_pauseparam *pp)
-{
- struct ocp_enet_private *dev = ndev->priv;
-
- local_bh_disable();
- if ((dev->phy.features & SUPPORTED_Autoneg) &&
- (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause)))
- pp->autoneg = 1;
-
- if (dev->phy.duplex == DUPLEX_FULL) {
- if (dev->phy.pause)
- pp->rx_pause = pp->tx_pause = 1;
- else if (dev->phy.asym_pause)
- pp->tx_pause = 1;
- }
- local_bh_enable();
-}
-
-static u32 emac_ethtool_get_rx_csum(struct net_device *ndev)
-{
- struct ocp_enet_private *dev = ndev->priv;
- return dev->tah_dev != 0;
-}
-
-static int emac_get_regs_len(struct ocp_enet_private *dev)
-{
- return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE;
-}
-
-static int emac_ethtool_get_regs_len(struct net_device *ndev)
-{
- struct ocp_enet_private *dev = ndev->priv;
- return sizeof(struct emac_ethtool_regs_hdr) +
- emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) +
- zmii_get_regs_len(dev->zmii_dev) +
- rgmii_get_regs_len(dev->rgmii_dev) +
- tah_get_regs_len(dev->tah_dev);
-}
-
-static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf)
-{
- struct emac_ethtool_regs_subhdr *hdr = buf;
-
- hdr->version = EMAC_ETHTOOL_REGS_VER;
- hdr->index = dev->def->index;
- memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE);
- return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE);
-}
-
-static void emac_ethtool_get_regs(struct net_device *ndev,
- struct ethtool_regs *regs, void *buf)
-{
- struct ocp_enet_private *dev = ndev->priv;
- struct emac_ethtool_regs_hdr *hdr = buf;
-
- hdr->components = 0;
- buf = hdr + 1;
-
- local_irq_disable();
- buf = mal_dump_regs(dev->mal, buf);
- buf = emac_dump_regs(dev, buf);
- if (dev->zmii_dev) {
- hdr->components |= EMAC_ETHTOOL_REGS_ZMII;
- buf = zmii_dump_regs(dev->zmii_dev, buf);
- }
- if (dev->rgmii_dev) {
- hdr->components |= EMAC_ETHTOOL_REGS_RGMII;
- buf = rgmii_dump_regs(dev->rgmii_dev, buf);
- }
- if (dev->tah_dev) {
- hdr->components |= EMAC_ETHTOOL_REGS_TAH;
- buf = tah_dump_regs(dev->tah_dev, buf);
- }
- local_irq_enable();
-}
-
-static int emac_ethtool_nway_reset(struct net_device *ndev)
-{
- struct ocp_enet_private *dev = ndev->priv;
- int res = 0;
-
- DBG("%d: nway_reset" NL, dev->def->index);
-
- if (dev->phy.address < 0)
- return -EOPNOTSUPP;
-
- local_bh_disable();
- if (!dev->phy.autoneg) {
- res = -EINVAL;
- goto out;
- }
-
- dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising);
- emac_force_link_update(dev);
-
- out:
- local_bh_enable();
- return res;
-}
-
-static int emac_get_sset_count(struct net_device *ndev, int sset)
-{
- switch (sset) {
- case ETH_SS_STATS:
- return EMAC_ETHTOOL_STATS_COUNT;
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset,
- u8 * buf)
-{
- if (stringset == ETH_SS_STATS)
- memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys));
-}
-
-static void emac_ethtool_get_ethtool_stats(struct net_device *ndev,
- struct ethtool_stats *estats,
- u64 * tmp_stats)
-{
- struct ocp_enet_private *dev = ndev->priv;
- local_irq_disable();
- memcpy(tmp_stats, &dev->stats, sizeof(dev->stats));
- tmp_stats += sizeof(dev->stats) / sizeof(u64);
- memcpy(tmp_stats, &dev->estats, sizeof(dev->estats));
- local_irq_enable();
-}
-
-static void emac_ethtool_get_drvinfo(struct net_device *ndev,
- struct ethtool_drvinfo *info)
-{
- struct ocp_enet_private *dev = ndev->priv;
-
- strcpy(info->driver, "ibm_emac");
- strcpy(info->version, DRV_VERSION);
- info->fw_version[0] = '\0';
- sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index);
- info->regdump_len = emac_ethtool_get_regs_len(ndev);
-}
-
-static const struct ethtool_ops emac_ethtool_ops = {
- .get_settings = emac_ethtool_get_settings,
- .set_settings = emac_ethtool_set_settings,
- .get_drvinfo = emac_ethtool_get_drvinfo,
-
- .get_regs_len = emac_ethtool_get_regs_len,
- .get_regs = emac_ethtool_get_regs,
-
- .nway_reset = emac_ethtool_nway_reset,
-
- .get_ringparam = emac_ethtool_get_ringparam,
- .get_pauseparam = emac_ethtool_get_pauseparam,
-
- .get_rx_csum = emac_ethtool_get_rx_csum,
-
- .get_strings = emac_ethtool_get_strings,
- .get_sset_count = emac_get_sset_count,
- .get_ethtool_stats = emac_ethtool_get_ethtool_stats,
-
- .get_link = ethtool_op_get_link,
-};
-
-static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
-{
- struct ocp_enet_private *dev = ndev->priv;
- uint16_t *data = (uint16_t *) & rq->ifr_ifru;
-
- DBG("%d: ioctl %08x" NL, dev->def->index, cmd);
-
- if (dev->phy.address < 0)
- return -EOPNOTSUPP;
-
- switch (cmd) {
- case SIOCGMIIPHY:
- case SIOCDEVPRIVATE:
- data[0] = dev->phy.address;
- /* Fall through */
- case SIOCGMIIREG:
- case SIOCDEVPRIVATE + 1:
- data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]);
- return 0;
-
- case SIOCSMIIREG:
- case SIOCDEVPRIVATE + 2:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- emac_mdio_write(ndev, dev->phy.address, data[1], data[2]);
- return 0;
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static int __init emac_probe(struct ocp_device *ocpdev)
-{
- struct ocp_func_emac_data *emacdata = ocpdev->def->additions;
- struct net_device *ndev;
- struct ocp_device *maldev;
- struct ocp_enet_private *dev;
- int err, i;
- DECLARE_MAC_BUF(mac);
-
- DBG("%d: probe" NL, ocpdev->def->index);
-
- if (!emacdata) {
- printk(KERN_ERR "emac%d: Missing additional data!\n",
- ocpdev->def->index);
- return -ENODEV;
- }
-
- /* Allocate our net_device structure */
- ndev = alloc_etherdev(sizeof(struct ocp_enet_private));
- if (!ndev) {
- printk(KERN_ERR "emac%d: could not allocate ethernet device!\n",
- ocpdev->def->index);
- return -ENOMEM;
- }
- dev = ndev->priv;
- dev->ndev = ndev;
- dev->ldev = &ocpdev->dev;
- dev->def = ocpdev->def;
-
- /* Find MAL device we are connected to */
- maldev =
- ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx);
- if (!maldev) {
- printk(KERN_ERR "emac%d: unknown mal%d device!\n",
- dev->def->index, emacdata->mal_idx);
- err = -ENODEV;
- goto out;
- }
- dev->mal = ocp_get_drvdata(maldev);
- if (!dev->mal) {
- printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n",
- dev->def->index, emacdata->mal_idx);
- err = -ENODEV;
- goto out;
- }
-
- /* Register with MAL */
- dev->commac.ops = &emac_commac_ops;
- dev->commac.dev = dev;
- dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan);
- dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan);
- err = mal_register_commac(dev->mal, &dev->commac);
- if (err) {
- printk(KERN_ERR "emac%d: failed to register with mal%d!\n",
- dev->def->index, emacdata->mal_idx);
- goto out;
- }
- dev->rx_skb_size = emac_rx_skb_size(ndev->mtu);
- dev->rx_sync_size = emac_rx_sync_size(ndev->mtu);
-
- /* Get pointers to BD rings */
- dev->tx_desc =
- dev->mal->bd_virt + mal_tx_bd_offset(dev->mal,
- emacdata->mal_tx_chan);
- dev->rx_desc =
- dev->mal->bd_virt + mal_rx_bd_offset(dev->mal,
- emacdata->mal_rx_chan);
-
- DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc);
- DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc);
-
- /* Clean rings */
- memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor));
- memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor));
-
- /* If we depend on another EMAC for MDIO, check whether it was probed already */
- if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) {
- struct ocp_device *mdiodev =
- ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC,
- emacdata->mdio_idx);
- if (!mdiodev) {
- printk(KERN_ERR "emac%d: unknown emac%d device!\n",
- dev->def->index, emacdata->mdio_idx);
- err = -ENODEV;
- goto out2;
- }
- dev->mdio_dev = ocp_get_drvdata(mdiodev);
- if (!dev->mdio_dev) {
- printk(KERN_ERR
- "emac%d: emac%d hasn't been initialized yet!\n",
- dev->def->index, emacdata->mdio_idx);
- err = -ENODEV;
- goto out2;
- }
- }
-
- /* Attach to ZMII, if needed */
- if ((err = zmii_attach(dev)) != 0)
- goto out2;
-
- /* Attach to RGMII, if needed */
- if ((err = rgmii_attach(dev)) != 0)
- goto out3;
-
- /* Attach to TAH, if needed */
- if ((err = tah_attach(dev)) != 0)
- goto out4;
-
- /* Map EMAC regs */
- dev->emacp = ioremap(dev->def->paddr, sizeof(struct emac_regs));
- if (!dev->emacp) {
- printk(KERN_ERR "emac%d: could not ioremap device registers!\n",
- dev->def->index);
- err = -ENOMEM;
- goto out5;
- }
-
- /* Fill in MAC address */
- for (i = 0; i < 6; ++i)
- ndev->dev_addr[i] = emacdata->mac_addr[i];
-
- /* Set some link defaults before we can find out real parameters */
- dev->phy.speed = SPEED_100;
- dev->phy.duplex = DUPLEX_FULL;
- dev->phy.autoneg = AUTONEG_DISABLE;
- dev->phy.pause = dev->phy.asym_pause = 0;
- dev->stop_timeout = STOP_TIMEOUT_100;
- init_timer(&dev->link_timer);
- dev->link_timer.function = emac_link_timer;
- dev->link_timer.data = (unsigned long)dev;
-
- /* Find PHY if any */
- dev->phy.dev = ndev;
- dev->phy.mode = emacdata->phy_mode;
- if (emacdata->phy_map != 0xffffffff) {
- u32 phy_map = emacdata->phy_map | busy_phy_map;
- u32 adv;
-
- DBG("%d: PHY maps %08x %08x" NL, dev->def->index,
- emacdata->phy_map, busy_phy_map);
-
- EMAC_RX_CLK_TX(dev->def->index);
-
- dev->phy.mdio_read = emac_mdio_read;
- dev->phy.mdio_write = emac_mdio_write;
-
- /* Configure EMAC with defaults so we can at least use MDIO
- * This is needed mostly for 440GX
- */
- if (emac_phy_gpcs(dev->phy.mode)) {
- /* XXX
- * Make GPCS PHY address equal to EMAC index.
- * We probably should take into account busy_phy_map
- * and/or phy_map here.
- */
- dev->phy.address = dev->def->index;
- }
-
- emac_configure(dev);
-
- for (i = 0; i < 0x20; phy_map >>= 1, ++i)
- if (!(phy_map & 1)) {
- int r;
- busy_phy_map |= 1 << i;
-
- /* Quick check if there is a PHY at the address */
- r = emac_mdio_read(dev->ndev, i, MII_BMCR);
- if (r == 0xffff || r < 0)
- continue;
- if (!mii_phy_probe(&dev->phy, i))
- break;
- }
- if (i == 0x20) {
- printk(KERN_WARNING "emac%d: can't find PHY!\n",
- dev->def->index);
- goto out6;
- }
-
- /* Init PHY */
- if (dev->phy.def->ops->init)
- dev->phy.def->ops->init(&dev->phy);
-
- /* Disable any PHY features not supported by the platform */
- dev->phy.def->features &= ~emacdata->phy_feat_exc;
-
- /* Setup initial link parameters */
- if (dev->phy.features & SUPPORTED_Autoneg) {
- adv = dev->phy.features;
-#if !defined(CONFIG_40x)
- adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
-#endif
- /* Restart autonegotiation */
- dev->phy.def->ops->setup_aneg(&dev->phy, adv);
- } else {
- u32 f = dev->phy.def->features;
- int speed = SPEED_10, fd = DUPLEX_HALF;
-
- /* Select highest supported speed/duplex */
- if (f & SUPPORTED_1000baseT_Full) {
- speed = SPEED_1000;
- fd = DUPLEX_FULL;
- } else if (f & SUPPORTED_1000baseT_Half)
- speed = SPEED_1000;
- else if (f & SUPPORTED_100baseT_Full) {
- speed = SPEED_100;
- fd = DUPLEX_FULL;
- } else if (f & SUPPORTED_100baseT_Half)
- speed = SPEED_100;
- else if (f & SUPPORTED_10baseT_Full)
- fd = DUPLEX_FULL;
-
- /* Force link parameters */
- dev->phy.def->ops->setup_forced(&dev->phy, speed, fd);
- }
- } else {
- emac_reset(dev);
-
- /* PHY-less configuration.
- * XXX I probably should move these settings to emacdata
- */
- dev->phy.address = -1;
- dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII;
- dev->phy.pause = 1;
- }
-
- /* Fill in the driver function table */
- ndev->open = &emac_open;
- if (dev->tah_dev) {
- ndev->hard_start_xmit = &emac_start_xmit_sg;
- ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
- } else
- ndev->hard_start_xmit = &emac_start_xmit;
- ndev->tx_timeout = &emac_full_tx_reset;
- ndev->watchdog_timeo = 5 * HZ;
- ndev->stop = &emac_close;
- ndev->get_stats = &emac_stats;
- ndev->set_multicast_list = &emac_set_multicast_list;
- ndev->do_ioctl = &emac_ioctl;
- if (emac_phy_supports_gige(emacdata->phy_mode)) {
- ndev->change_mtu = &emac_change_mtu;
- dev->commac.ops = &emac_commac_sg_ops;
- }
- SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
-
- netif_carrier_off(ndev);
- netif_stop_queue(ndev);
-
- err = register_netdev(ndev);
- if (err) {
- printk(KERN_ERR "emac%d: failed to register net device (%d)!\n",
- dev->def->index, err);
- goto out6;
- }
-
- ocp_set_drvdata(ocpdev, dev);
-
- printk("%s: emac%d, MAC %s\n",
- ndev->name, dev->def->index, print_mac(mac, ndev->dev_addr));
-
- if (dev->phy.address >= 0)
- printk("%s: found %s PHY (0x%02x)\n", ndev->name,
- dev->phy.def->name, dev->phy.address);
-
- emac_dbg_register(dev->def->index, dev);
-
- return 0;
- out6:
- iounmap(dev->emacp);
- out5:
- tah_fini(dev->tah_dev);
- out4:
- rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
- out3:
- zmii_fini(dev->zmii_dev, dev->zmii_input);
- out2:
- mal_unregister_commac(dev->mal, &dev->commac);
- out:
- kfree(ndev);
- return err;
-}
-
-static struct ocp_device_id emac_ids[] = {
- { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC },
- { .vendor = OCP_VENDOR_INVALID}
-};
-
-static struct ocp_driver emac_driver = {
- .name = "emac",
- .id_table = emac_ids,
- .probe = emac_probe,
- .remove = emac_remove,
-};
-
-static int __init emac_init(void)
-{
- printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n");
-
- DBG(": init" NL);
-
- if (mal_init())
- return -ENODEV;
-
- EMAC_CLK_INTERNAL;
- if (ocp_register_driver(&emac_driver)) {
- EMAC_CLK_EXTERNAL;
- ocp_unregister_driver(&emac_driver);
- mal_exit();
- return -ENODEV;
- }
- EMAC_CLK_EXTERNAL;
-
- emac_init_debug();
- return 0;
-}
-
-static void __exit emac_exit(void)
-{
- DBG(": exit" NL);
- ocp_unregister_driver(&emac_driver);
- mal_exit();
- emac_fini_debug();
-}
-
-module_init(emac_init);
-module_exit(emac_exit);
diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h
deleted file mode 100644
index dabb94afeb9..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_core.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_core.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- * Armin Kuster <akuster@mvista.com>
- * Johnnie Peters <jpeters@mvista.com>
- * Copyright 2000, 2001 MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#ifndef __IBM_EMAC_CORE_H_
-#define __IBM_EMAC_CORE_H_
-
-#include <linux/netdevice.h>
-#include <linux/dma-mapping.h>
-#include <asm/ocp.h>
-
-#include "ibm_emac.h"
-#include "ibm_emac_phy.h"
-#include "ibm_emac_zmii.h"
-#include "ibm_emac_rgmii.h"
-#include "ibm_emac_mal.h"
-#include "ibm_emac_tah.h"
-
-#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB
-#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB
-
-/* Simple sanity check */
-#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
-#error Invalid number of buffer descriptors (greater than 256)
-#endif
-
-// XXX
-#define EMAC_MIN_MTU 46
-#define EMAC_MAX_MTU 9000
-
-/* Maximum L2 header length (VLAN tagged, no FCS) */
-#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4)
-
-/* RX BD size for the given MTU */
-static inline int emac_rx_size(int mtu)
-{
- if (mtu > ETH_DATA_LEN)
- return MAL_MAX_RX_SIZE;
- else
- return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
-}
-
-#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment())
-
-#define EMAC_RX_SKB_HEADROOM \
- EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
-
-/* Size of RX skb for the given MTU */
-static inline int emac_rx_skb_size(int mtu)
-{
- int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
- return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
-}
-
-/* RX DMA sync size */
-static inline int emac_rx_sync_size(int mtu)
-{
- return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
-}
-
-/* Driver statistcs is split into two parts to make it more cache friendly:
- * - normal statistics (packet count, etc)
- * - error statistics
- *
- * When statistics is requested by ethtool, these parts are concatenated,
- * normal one goes first.
- *
- * Please, keep these structures in sync with emac_stats_keys.
- */
-
-/* Normal TX/RX Statistics */
-struct ibm_emac_stats {
- u64 rx_packets;
- u64 rx_bytes;
- u64 tx_packets;
- u64 tx_bytes;
- u64 rx_packets_csum;
- u64 tx_packets_csum;
-};
-
-/* Error statistics */
-struct ibm_emac_error_stats {
- u64 tx_undo;
-
- /* Software RX Errors */
- u64 rx_dropped_stack;
- u64 rx_dropped_oom;
- u64 rx_dropped_error;
- u64 rx_dropped_resize;
- u64 rx_dropped_mtu;
- u64 rx_stopped;
- /* BD reported RX errors */
- u64 rx_bd_errors;
- u64 rx_bd_overrun;
- u64 rx_bd_bad_packet;
- u64 rx_bd_runt_packet;
- u64 rx_bd_short_event;
- u64 rx_bd_alignment_error;
- u64 rx_bd_bad_fcs;
- u64 rx_bd_packet_too_long;
- u64 rx_bd_out_of_range;
- u64 rx_bd_in_range;
- /* EMAC IRQ reported RX errors */
- u64 rx_parity;
- u64 rx_fifo_overrun;
- u64 rx_overrun;
- u64 rx_bad_packet;
- u64 rx_runt_packet;
- u64 rx_short_event;
- u64 rx_alignment_error;
- u64 rx_bad_fcs;
- u64 rx_packet_too_long;
- u64 rx_out_of_range;
- u64 rx_in_range;
-
- /* Software TX Errors */
- u64 tx_dropped;
- /* BD reported TX errors */
- u64 tx_bd_errors;
- u64 tx_bd_bad_fcs;
- u64 tx_bd_carrier_loss;
- u64 tx_bd_excessive_deferral;
- u64 tx_bd_excessive_collisions;
- u64 tx_bd_late_collision;
- u64 tx_bd_multple_collisions;
- u64 tx_bd_single_collision;
- u64 tx_bd_underrun;
- u64 tx_bd_sqe;
- /* EMAC IRQ reported TX errors */
- u64 tx_parity;
- u64 tx_underrun;
- u64 tx_sqe;
- u64 tx_errors;
-};
-
-#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \
- sizeof(struct ibm_emac_error_stats)) \
- / sizeof(u64))
-
-struct ocp_enet_private {
- struct net_device *ndev; /* 0 */
- struct emac_regs __iomem *emacp;
-
- struct mal_descriptor *tx_desc;
- int tx_cnt;
- int tx_slot;
- int ack_slot;
-
- struct mal_descriptor *rx_desc;
- int rx_slot;
- struct sk_buff *rx_sg_skb; /* 1 */
- int rx_skb_size;
- int rx_sync_size;
-
- struct ibm_emac_stats stats;
- struct ocp_device *tah_dev;
-
- struct ibm_ocp_mal *mal;
- struct mal_commac commac;
-
- struct sk_buff *tx_skb[NUM_TX_BUFF];
- struct sk_buff *rx_skb[NUM_RX_BUFF];
-
- struct ocp_device *zmii_dev;
- int zmii_input;
- struct ocp_enet_private *mdio_dev;
- struct ocp_device *rgmii_dev;
- int rgmii_input;
-
- struct ocp_def *def;
-
- struct mii_phy phy;
- struct timer_list link_timer;
- int reset_failed;
-
- int stop_timeout; /* in us */
-
- struct ibm_emac_error_stats estats;
- struct net_device_stats nstats;
-
- struct device* ldev;
-};
-
-/* Ethtool get_regs complex data.
- * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
- * when available.
- *
- * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
- * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
- * Each register component is preceded with emac_ethtool_regs_subhdr.
- * Order of the optional headers follows their relative bit posititions
- * in emac_ethtool_regs_hdr.components
- */
-#define EMAC_ETHTOOL_REGS_ZMII 0x00000001
-#define EMAC_ETHTOOL_REGS_RGMII 0x00000002
-#define EMAC_ETHTOOL_REGS_TAH 0x00000004
-
-struct emac_ethtool_regs_hdr {
- u32 components;
-};
-
-struct emac_ethtool_regs_subhdr {
- u32 version;
- u32 index;
-};
-
-#endif /* __IBM_EMAC_CORE_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c
deleted file mode 100644
index 1f70906cfb9..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_debug.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_debug.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/sysrq.h>
-#include <asm/io.h>
-
-#include "ibm_emac_core.h"
-
-static void emac_desc_dump(int idx, struct ocp_enet_private *p)
-{
- int i;
- printk("** EMAC%d TX BDs **\n"
- " tx_cnt = %d tx_slot = %d ack_slot = %d\n",
- idx, p->tx_cnt, p->tx_slot, p->ack_slot);
- for (i = 0; i < NUM_TX_BUFF / 2; ++i)
- printk
- ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
- i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ',
- p->tx_desc[i].ctrl, p->tx_desc[i].data_len,
- NUM_TX_BUFF / 2 + i,
- p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr,
- p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ',
- p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl,
- p->tx_desc[NUM_TX_BUFF / 2 + i].data_len);
-
- printk("** EMAC%d RX BDs **\n"
- " rx_slot = %d rx_stopped = %d rx_skb_size = %d rx_sync_size = %d\n"
- " rx_sg_skb = 0x%p\n",
- idx, p->rx_slot, p->commac.rx_stopped, p->rx_skb_size,
- p->rx_sync_size, p->rx_sg_skb);
- for (i = 0; i < NUM_RX_BUFF / 2; ++i)
- printk
- ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
- i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ',
- p->rx_desc[i].ctrl, p->rx_desc[i].data_len,
- NUM_RX_BUFF / 2 + i,
- p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr,
- p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ',
- p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl,
- p->rx_desc[NUM_RX_BUFF / 2 + i].data_len);
-}
-
-static void emac_mac_dump(int idx, struct ocp_enet_private *dev)
-{
- struct emac_regs __iomem *p = dev->emacp;
-
- printk("** EMAC%d registers **\n"
- "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n"
- "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n"
- "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n"
- "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x "
- "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n"
- "LSA = %04x%08x IPGVR = 0x%04x\n"
- "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n"
- "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n",
- idx, in_be32(&p->mr0), in_be32(&p->mr1),
- in_be32(&p->tmr0), in_be32(&p->tmr1),
- in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser),
- in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid),
- in_be32(&p->vtci),
- in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3),
- in_be32(&p->iaht4),
- in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3),
- in_be32(&p->gaht4),
- in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr),
- in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr),
- in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr)
- );
-
- emac_desc_dump(idx, dev);
-}
-
-static void emac_mal_dump(struct ibm_ocp_mal *mal)
-{
- struct ocp_func_mal_data *maldata = mal->def->additions;
- int i;
-
- printk("** MAL%d Registers **\n"
- "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n"
- "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n"
- "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n",
- mal->def->index,
- get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR),
- get_mal_dcrn(mal, MAL_IER),
- get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR),
- get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR),
- get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR),
- get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR)
- );
-
- printk("TX|");
- for (i = 0; i < maldata->num_tx_chans; ++i) {
- if (i && !(i % 4))
- printk("\n ");
- printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i)));
- }
- printk("\nRX|");
- for (i = 0; i < maldata->num_rx_chans; ++i) {
- if (i && !(i % 4))
- printk("\n ");
- printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i)));
- }
- printk("\n ");
- for (i = 0; i < maldata->num_rx_chans; ++i) {
- u32 r = get_mal_dcrn(mal, MAL_RCBS(i));
- if (i && !(i % 3))
- printk("\n ");
- printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16);
- }
- printk("\n");
-}
-
-static struct ocp_enet_private *__emacs[4];
-static struct ibm_ocp_mal *__mals[1];
-
-void emac_dbg_register(int idx, struct ocp_enet_private *dev)
-{
- unsigned long flags;
-
- if (idx >= ARRAY_SIZE(__emacs)) {
- printk(KERN_WARNING
- "invalid index %d when registering EMAC for debugging\n",
- idx);
- return;
- }
-
- local_irq_save(flags);
- __emacs[idx] = dev;
- local_irq_restore(flags);
-}
-
-void mal_dbg_register(int idx, struct ibm_ocp_mal *mal)
-{
- unsigned long flags;
-
- if (idx >= ARRAY_SIZE(__mals)) {
- printk(KERN_WARNING
- "invalid index %d when registering MAL for debugging\n",
- idx);
- return;
- }
-
- local_irq_save(flags);
- __mals[idx] = mal;
- local_irq_restore(flags);
-}
-
-void emac_dbg_dump_all(void)
-{
- unsigned int i;
- unsigned long flags;
-
- local_irq_save(flags);
-
- for (i = 0; i < ARRAY_SIZE(__mals); ++i)
- if (__mals[i])
- emac_mal_dump(__mals[i]);
-
- for (i = 0; i < ARRAY_SIZE(__emacs); ++i)
- if (__emacs[i])
- emac_mac_dump(i, __emacs[i]);
-
- local_irq_restore(flags);
-}
-
-#if defined(CONFIG_MAGIC_SYSRQ)
-static void emac_sysrq_handler(int key, struct tty_struct *tty)
-{
- emac_dbg_dump_all();
-}
-
-static struct sysrq_key_op emac_sysrq_op = {
- .handler = emac_sysrq_handler,
- .help_msg = "emaC",
- .action_msg = "Show EMAC(s) status",
-};
-
-int __init emac_init_debug(void)
-{
- return register_sysrq_key('c', &emac_sysrq_op);
-}
-
-void __exit emac_fini_debug(void)
-{
- unregister_sysrq_key('c', &emac_sysrq_op);
-}
-
-#else
-int __init emac_init_debug(void)
-{
- return 0;
-}
-void __exit emac_fini_debug(void)
-{
-}
-#endif /* CONFIG_MAGIC_SYSRQ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.h b/drivers/net/ibm_emac/ibm_emac_debug.h
deleted file mode 100644
index 6c7dccc84bf..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_debug.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_debug.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#ifndef __IBM_EMAC_DEBUG_H_
-#define __IBM_EMAC_DEBUG_H_
-
-#include <linux/init.h>
-#include "ibm_emac_core.h"
-#include "ibm_emac_mal.h"
-
-#if defined(CONFIG_IBM_EMAC_DEBUG)
-void emac_dbg_register(int idx, struct ocp_enet_private *dev);
-void mal_dbg_register(int idx, struct ibm_ocp_mal *mal);
-int emac_init_debug(void) __init;
-void emac_fini_debug(void) __exit;
-void emac_dbg_dump_all(void);
-# define DBG_LEVEL 1
-#else
-# define emac_dbg_register(x,y) ((void)0)
-# define mal_dbg_register(x,y) ((void)0)
-# define emac_init_debug() ((void)0)
-# define emac_fini_debug() ((void)0)
-# define emac_dbg_dump_all() ((void)0)
-# define DBG_LEVEL 0
-#endif
-
-#if DBG_LEVEL > 0
-# define DBG(f,x...) printk("emac" f, ##x)
-# define MAL_DBG(f,x...) printk("mal" f, ##x)
-# define ZMII_DBG(f,x...) printk("zmii" f, ##x)
-# define RGMII_DBG(f,x...) printk("rgmii" f, ##x)
-# define NL "\n"
-#else
-# define DBG(f,x...) ((void)0)
-# define MAL_DBG(f,x...) ((void)0)
-# define ZMII_DBG(f,x...) ((void)0)
-# define RGMII_DBG(f,x...) ((void)0)
-#endif
-#if DBG_LEVEL > 1
-# define DBG2(f,x...) DBG(f, ##x)
-# define MAL_DBG2(f,x...) MAL_DBG(f, ##x)
-# define ZMII_DBG2(f,x...) ZMII_DBG(f, ##x)
-# define RGMII_DBG2(f,x...) RGMII_DBG(f, ##x)
-#else
-# define DBG2(f,x...) ((void)0)
-# define MAL_DBG2(f,x...) ((void)0)
-# define ZMII_DBG2(f,x...) ((void)0)
-# define RGMII_DBG2(f,x...) ((void)0)
-#endif
-
-#endif /* __IBM_EMAC_DEBUG_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c
deleted file mode 100644
index dcd8826fc74..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_mal.c
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_mal.c
- *
- * Memory Access Layer (MAL) support
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>,
- * David Gibson <hermes@gibson.dropbear.id.au>,
- *
- * Armin Kuster <akuster@mvista.com>
- * Copyright 2002 MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/ocp.h>
-
-#include "ibm_emac_core.h"
-#include "ibm_emac_mal.h"
-#include "ibm_emac_debug.h"
-
-int __init mal_register_commac(struct ibm_ocp_mal *mal,
- struct mal_commac *commac)
-{
- unsigned long flags;
- local_irq_save(flags);
-
- MAL_DBG("%d: reg(%08x, %08x)" NL, mal->def->index,
- commac->tx_chan_mask, commac->rx_chan_mask);
-
- /* Don't let multiple commacs claim the same channel(s) */
- if ((mal->tx_chan_mask & commac->tx_chan_mask) ||
- (mal->rx_chan_mask & commac->rx_chan_mask)) {
- local_irq_restore(flags);
- printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n",
- mal->def->index);
- return -EBUSY;
- }
-
- mal->tx_chan_mask |= commac->tx_chan_mask;
- mal->rx_chan_mask |= commac->rx_chan_mask;
- list_add(&commac->list, &mal->list);
-
- local_irq_restore(flags);
- return 0;
-}
-
-void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
-{
- unsigned long flags;
- local_irq_save(flags);
-
- MAL_DBG("%d: unreg(%08x, %08x)" NL, mal->def->index,
- commac->tx_chan_mask, commac->rx_chan_mask);
-
- mal->tx_chan_mask &= ~commac->tx_chan_mask;
- mal->rx_chan_mask &= ~commac->rx_chan_mask;
- list_del_init(&commac->list);
-
- local_irq_restore(flags);
-}
-
-int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size)
-{
- struct ocp_func_mal_data *maldata = mal->def->additions;
- BUG_ON(channel < 0 || channel >= maldata->num_rx_chans ||
- size > MAL_MAX_RX_SIZE);
-
- MAL_DBG("%d: set_rbcs(%d, %lu)" NL, mal->def->index, channel, size);
-
- if (size & 0xf) {
- printk(KERN_WARNING
- "mal%d: incorrect RX size %lu for the channel %d\n",
- mal->def->index, size, channel);
- return -EINVAL;
- }
-
- set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4);
- return 0;
-}
-
-int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel)
-{
- struct ocp_func_mal_data *maldata = mal->def->additions;
- BUG_ON(channel < 0 || channel >= maldata->num_tx_chans);
- return channel * NUM_TX_BUFF;
-}
-
-int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel)
-{
- struct ocp_func_mal_data *maldata = mal->def->additions;
- BUG_ON(channel < 0 || channel >= maldata->num_rx_chans);
- return maldata->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF;
-}
-
-void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel)
-{
- local_bh_disable();
- MAL_DBG("%d: enable_tx(%d)" NL, mal->def->index, channel);
- set_mal_dcrn(mal, MAL_TXCASR,
- get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel));
- local_bh_enable();
-}
-
-void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel)
-{
- set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel));
- MAL_DBG("%d: disable_tx(%d)" NL, mal->def->index, channel);
-}
-
-void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel)
-{
- local_bh_disable();
- MAL_DBG("%d: enable_rx(%d)" NL, mal->def->index, channel);
- set_mal_dcrn(mal, MAL_RXCASR,
- get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel));
- local_bh_enable();
-}
-
-void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel)
-{
- set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel));
- MAL_DBG("%d: disable_rx(%d)" NL, mal->def->index, channel);
-}
-
-void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac)
-{
- local_bh_disable();
- MAL_DBG("%d: poll_add(%p)" NL, mal->def->index, commac);
- list_add_tail(&commac->poll_list, &mal->poll_list);
- local_bh_enable();
-}
-
-void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac)
-{
- local_bh_disable();
- MAL_DBG("%d: poll_del(%p)" NL, mal->def->index, commac);
- list_del(&commac->poll_list);
- local_bh_enable();
-}
-
-/* synchronized by mal_poll() */
-static inline void mal_enable_eob_irq(struct ibm_ocp_mal *mal)
-{
- MAL_DBG2("%d: enable_irq" NL, mal->def->index);
- set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE);
-}
-
-/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */
-static inline void mal_disable_eob_irq(struct ibm_ocp_mal *mal)
-{
- set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE);
- MAL_DBG2("%d: disable_irq" NL, mal->def->index);
-}
-
-static irqreturn_t mal_serr(int irq, void *dev_instance)
-{
- struct ibm_ocp_mal *mal = dev_instance;
- u32 esr = get_mal_dcrn(mal, MAL_ESR);
-
- /* Clear the error status register */
- set_mal_dcrn(mal, MAL_ESR, esr);
-
- MAL_DBG("%d: SERR %08x" NL, mal->def->index, esr);
-
- if (esr & MAL_ESR_EVB) {
- if (esr & MAL_ESR_DE) {
- /* We ignore Descriptor error,
- * TXDE or RXDE interrupt will be generated anyway.
- */
- return IRQ_HANDLED;
- }
-
- if (esr & MAL_ESR_PEIN) {
- /* PLB error, it's probably buggy hardware or
- * incorrect physical address in BD (i.e. bug)
- */
- if (net_ratelimit())
- printk(KERN_ERR
- "mal%d: system error, PLB (ESR = 0x%08x)\n",
- mal->def->index, esr);
- return IRQ_HANDLED;
- }
-
- /* OPB error, it's probably buggy hardware or incorrect EBC setup */
- if (net_ratelimit())
- printk(KERN_ERR
- "mal%d: system error, OPB (ESR = 0x%08x)\n",
- mal->def->index, esr);
- }
- return IRQ_HANDLED;
-}
-
-static inline void mal_schedule_poll(struct ibm_ocp_mal *mal)
-{
- if (likely(napi_schedule_prep(&mal->napi))) {
- MAL_DBG2("%d: schedule_poll" NL, mal->def->index);
- mal_disable_eob_irq(mal);
- __napi_schedule(&mal->napi);
- } else
- MAL_DBG2("%d: already in poll" NL, mal->def->index);
-}
-
-static irqreturn_t mal_txeob(int irq, void *dev_instance)
-{
- struct ibm_ocp_mal *mal = dev_instance;
- u32 r = get_mal_dcrn(mal, MAL_TXEOBISR);
- MAL_DBG2("%d: txeob %08x" NL, mal->def->index, r);
- mal_schedule_poll(mal);
- set_mal_dcrn(mal, MAL_TXEOBISR, r);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t mal_rxeob(int irq, void *dev_instance)
-{
- struct ibm_ocp_mal *mal = dev_instance;
- u32 r = get_mal_dcrn(mal, MAL_RXEOBISR);
- MAL_DBG2("%d: rxeob %08x" NL, mal->def->index, r);
- mal_schedule_poll(mal);
- set_mal_dcrn(mal, MAL_RXEOBISR, r);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t mal_txde(int irq, void *dev_instance)
-{
- struct ibm_ocp_mal *mal = dev_instance;
- u32 deir = get_mal_dcrn(mal, MAL_TXDEIR);
- set_mal_dcrn(mal, MAL_TXDEIR, deir);
-
- MAL_DBG("%d: txde %08x" NL, mal->def->index, deir);
-
- if (net_ratelimit())
- printk(KERN_ERR
- "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n",
- mal->def->index, deir);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t mal_rxde(int irq, void *dev_instance)
-{
- struct ibm_ocp_mal *mal = dev_instance;
- struct list_head *l;
- u32 deir = get_mal_dcrn(mal, MAL_RXDEIR);
-
- MAL_DBG("%d: rxde %08x" NL, mal->def->index, deir);
-
- list_for_each(l, &mal->list) {
- struct mal_commac *mc = list_entry(l, struct mal_commac, list);
- if (deir & mc->rx_chan_mask) {
- mc->rx_stopped = 1;
- mc->ops->rxde(mc->dev);
- }
- }
-
- mal_schedule_poll(mal);
- set_mal_dcrn(mal, MAL_RXDEIR, deir);
-
- return IRQ_HANDLED;
-}
-
-static int mal_poll(struct napi_struct *napi, int budget)
-{
- struct ibm_ocp_mal *mal = container_of(napi, struct ibm_ocp_mal, napi);
- struct list_head *l;
- int received = 0;
-
- MAL_DBG2("%d: poll(%d) %d ->" NL, mal->def->index, *budget,
- rx_work_limit);
- again:
- /* Process TX skbs */
- list_for_each(l, &mal->poll_list) {
- struct mal_commac *mc =
- list_entry(l, struct mal_commac, poll_list);
- mc->ops->poll_tx(mc->dev);
- }
-
- /* Process RX skbs.
- * We _might_ need something more smart here to enforce polling fairness.
- */
- list_for_each(l, &mal->poll_list) {
- struct mal_commac *mc =
- list_entry(l, struct mal_commac, poll_list);
- int n = mc->ops->poll_rx(mc->dev, budget);
- if (n) {
- received += n;
- budget -= n;
- if (budget <= 0)
- goto more_work; // XXX What if this is the last one ?
- }
- }
-
- /* We need to disable IRQs to protect from RXDE IRQ here */
- local_irq_disable();
- __napi_complete(napi);
- mal_enable_eob_irq(mal);
- local_irq_enable();
-
- /* Check for "rotting" packet(s) */
- list_for_each(l, &mal->poll_list) {
- struct mal_commac *mc =
- list_entry(l, struct mal_commac, poll_list);
- if (unlikely(mc->ops->peek_rx(mc->dev) || mc->rx_stopped)) {
- MAL_DBG2("%d: rotting packet" NL, mal->def->index);
- if (napi_reschedule(napi))
- mal_disable_eob_irq(mal);
- else
- MAL_DBG2("%d: already in poll list" NL,
- mal->def->index);
-
- if (budget > 0)
- goto again;
- else
- goto more_work;
- }
- mc->ops->poll_tx(mc->dev);
- }
-
- more_work:
- MAL_DBG2("%d: poll() %d <- %d" NL, mal->def->index, budget, received);
- return received;
-}
-
-static void mal_reset(struct ibm_ocp_mal *mal)
-{
- int n = 10;
- MAL_DBG("%d: reset" NL, mal->def->index);
-
- set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR);
-
- /* Wait for reset to complete (1 system clock) */
- while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n)
- --n;
-
- if (unlikely(!n))
- printk(KERN_ERR "mal%d: reset timeout\n", mal->def->index);
-}
-
-int mal_get_regs_len(struct ibm_ocp_mal *mal)
-{
- return sizeof(struct emac_ethtool_regs_subhdr) +
- sizeof(struct ibm_mal_regs);
-}
-
-void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf)
-{
- struct emac_ethtool_regs_subhdr *hdr = buf;
- struct ibm_mal_regs *regs = (struct ibm_mal_regs *)(hdr + 1);
- struct ocp_func_mal_data *maldata = mal->def->additions;
- int i;
-
- hdr->version = MAL_VERSION;
- hdr->index = mal->def->index;
-
- regs->tx_count = maldata->num_tx_chans;
- regs->rx_count = maldata->num_rx_chans;
-
- regs->cfg = get_mal_dcrn(mal, MAL_CFG);
- regs->esr = get_mal_dcrn(mal, MAL_ESR);
- regs->ier = get_mal_dcrn(mal, MAL_IER);
- regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR);
- regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR);
- regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR);
- regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR);
- regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR);
- regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR);
- regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR);
- regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR);
-
- for (i = 0; i < regs->tx_count; ++i)
- regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i));
-
- for (i = 0; i < regs->rx_count; ++i) {
- regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i));
- regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i));
- }
- return regs + 1;
-}
-
-static int __init mal_probe(struct ocp_device *ocpdev)
-{
- struct ibm_ocp_mal *mal;
- struct ocp_func_mal_data *maldata;
- int err = 0, i, bd_size;
-
- MAL_DBG("%d: probe" NL, ocpdev->def->index);
-
- maldata = ocpdev->def->additions;
- if (maldata == NULL) {
- printk(KERN_ERR "mal%d: missing additional data!\n",
- ocpdev->def->index);
- return -ENODEV;
- }
-
- mal = kzalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
- if (!mal) {
- printk(KERN_ERR
- "mal%d: out of memory allocating MAL structure!\n",
- ocpdev->def->index);
- return -ENOMEM;
- }
-
- /* XXX This only works for native dcr for now */
- mal->dcrhost = dcr_map(NULL, maldata->dcr_base, 0);
-
- mal->def = ocpdev->def;
-
- INIT_LIST_HEAD(&mal->poll_list);
- mal->napi.weight = CONFIG_IBM_EMAC_POLL_WEIGHT;
- mal->napi.poll = mal_poll;
-
- INIT_LIST_HEAD(&mal->list);
-
- /* Load power-on reset defaults */
- mal_reset(mal);
-
- /* Set the MAL configuration register */
- set_mal_dcrn(mal, MAL_CFG, MAL_CFG_DEFAULT | MAL_CFG_PLBB |
- MAL_CFG_OPBBL | MAL_CFG_LEA);
-
- mal_enable_eob_irq(mal);
-
- /* Allocate space for BD rings */
- BUG_ON(maldata->num_tx_chans <= 0 || maldata->num_tx_chans > 32);
- BUG_ON(maldata->num_rx_chans <= 0 || maldata->num_rx_chans > 32);
- bd_size = sizeof(struct mal_descriptor) *
- (NUM_TX_BUFF * maldata->num_tx_chans +
- NUM_RX_BUFF * maldata->num_rx_chans);
- mal->bd_virt =
- dma_alloc_coherent(&ocpdev->dev, bd_size, &mal->bd_dma, GFP_KERNEL);
-
- if (!mal->bd_virt) {
- printk(KERN_ERR
- "mal%d: out of memory allocating RX/TX descriptors!\n",
- mal->def->index);
- err = -ENOMEM;
- goto fail;
- }
- memset(mal->bd_virt, 0, bd_size);
-
- for (i = 0; i < maldata->num_tx_chans; ++i)
- set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma +
- sizeof(struct mal_descriptor) *
- mal_tx_bd_offset(mal, i));
-
- for (i = 0; i < maldata->num_rx_chans; ++i)
- set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma +
- sizeof(struct mal_descriptor) *
- mal_rx_bd_offset(mal, i));
-
- err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal);
- if (err)
- goto fail2;
- err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE", mal);
- if (err)
- goto fail3;
- err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
- if (err)
- goto fail4;
- err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
- if (err)
- goto fail5;
- err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
- if (err)
- goto fail6;
-
- /* Enable all MAL SERR interrupt sources */
- set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS);
-
- /* Advertise this instance to the rest of the world */
- ocp_set_drvdata(ocpdev, mal);
-
- mal_dbg_register(mal->def->index, mal);
-
- printk(KERN_INFO "mal%d: initialized, %d TX channels, %d RX channels\n",
- mal->def->index, maldata->num_tx_chans, maldata->num_rx_chans);
- return 0;
-
- fail6:
- free_irq(maldata->rxde_irq, mal);
- fail5:
- free_irq(maldata->txeob_irq, mal);
- fail4:
- free_irq(maldata->txde_irq, mal);
- fail3:
- free_irq(maldata->serr_irq, mal);
- fail2:
- dma_free_coherent(&ocpdev->dev, bd_size, mal->bd_virt, mal->bd_dma);
- fail:
- kfree(mal);
- return err;
-}
-
-static void __exit mal_remove(struct ocp_device *ocpdev)
-{
- struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev);
- struct ocp_func_mal_data *maldata = mal->def->additions;
-
- MAL_DBG("%d: remove" NL, mal->def->index);
-
- /* Synchronize with scheduled polling */
- napi_disable(&mal->napi);
-
- if (!list_empty(&mal->list)) {
- /* This is *very* bad */
- printk(KERN_EMERG
- "mal%d: commac list is not empty on remove!\n",
- mal->def->index);
- }
-
- ocp_set_drvdata(ocpdev, NULL);
-
- free_irq(maldata->serr_irq, mal);
- free_irq(maldata->txde_irq, mal);
- free_irq(maldata->txeob_irq, mal);
- free_irq(maldata->rxde_irq, mal);
- free_irq(maldata->rxeob_irq, mal);
-
- mal_reset(mal);
-
- mal_dbg_register(mal->def->index, NULL);
-
- dma_free_coherent(&ocpdev->dev,
- sizeof(struct mal_descriptor) *
- (NUM_TX_BUFF * maldata->num_tx_chans +
- NUM_RX_BUFF * maldata->num_rx_chans), mal->bd_virt,
- mal->bd_dma);
-
- kfree(mal);
-}
-
-/* Structure for a device driver */
-static struct ocp_device_id mal_ids[] = {
- { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_MAL },
- { .vendor = OCP_VENDOR_INVALID}
-};
-
-static struct ocp_driver mal_driver = {
- .name = "mal",
- .id_table = mal_ids,
-
- .probe = mal_probe,
- .remove = mal_remove,
-};
-
-int __init mal_init(void)
-{
- MAL_DBG(": init" NL);
- return ocp_register_driver(&mal_driver);
-}
-
-void __exit mal_exit(void)
-{
- MAL_DBG(": exit" NL);
- ocp_unregister_driver(&mal_driver);
-}
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h
deleted file mode 100644
index b8adbe6d4b0..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_mal.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_mal.h
- *
- * Memory Access Layer (MAL) support
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- * Armin Kuster <akuster@mvista.com>
- * Copyright 2002 MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#ifndef __IBM_EMAC_MAL_H_
-#define __IBM_EMAC_MAL_H_
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/netdevice.h>
-
-#include <asm/io.h>
-#include <asm/dcr.h>
-
-/*
- * These MAL "versions" probably aren't the real versions IBM uses for these
- * MAL cores, I assigned them just to make #ifdefs in this file nicer and
- * reflect the fact that 40x and 44x have slightly different MALs. --ebs
- */
-#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_NP405H)
-#define MAL_VERSION 1
-#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
-#define MAL_VERSION 2
-#else
-#error "Unknown SoC, please check chip manual and choose MAL 'version'"
-#endif
-
-/* MALx DCR registers */
-#define MAL_CFG 0x00
-#define MAL_CFG_SR 0x80000000
-#define MAL_CFG_PLBB 0x00004000
-#define MAL_CFG_OPBBL 0x00000080
-#define MAL_CFG_EOPIE 0x00000004
-#define MAL_CFG_LEA 0x00000002
-#define MAL_CFG_SD 0x00000001
-#if MAL_VERSION == 1
-#define MAL_CFG_PLBP_MASK 0x00c00000
-#define MAL_CFG_PLBP_10 0x00800000
-#define MAL_CFG_GA 0x00200000
-#define MAL_CFG_OA 0x00100000
-#define MAL_CFG_PLBLE 0x00080000
-#define MAL_CFG_PLBT_MASK 0x00078000
-#define MAL_CFG_DEFAULT (MAL_CFG_PLBP_10 | MAL_CFG_PLBT_MASK)
-#elif MAL_VERSION == 2
-#define MAL_CFG_RPP_MASK 0x00c00000
-#define MAL_CFG_RPP_10 0x00800000
-#define MAL_CFG_RMBS_MASK 0x00300000
-#define MAL_CFG_WPP_MASK 0x000c0000
-#define MAL_CFG_WPP_10 0x00080000
-#define MAL_CFG_WMBS_MASK 0x00030000
-#define MAL_CFG_PLBLE 0x00008000
-#define MAL_CFG_DEFAULT (MAL_CFG_RMBS_MASK | MAL_CFG_WMBS_MASK | \
- MAL_CFG_RPP_10 | MAL_CFG_WPP_10)
-#else
-#error "Unknown MAL version"
-#endif
-
-#define MAL_ESR 0x01
-#define MAL_ESR_EVB 0x80000000
-#define MAL_ESR_CIDT 0x40000000
-#define MAL_ESR_CID_MASK 0x3e000000
-#define MAL_ESR_CID_SHIFT 25
-#define MAL_ESR_DE 0x00100000
-#define MAL_ESR_OTE 0x00040000
-#define MAL_ESR_OSE 0x00020000
-#define MAL_ESR_PEIN 0x00010000
-#define MAL_ESR_DEI 0x00000010
-#define MAL_ESR_OTEI 0x00000004
-#define MAL_ESR_OSEI 0x00000002
-#define MAL_ESR_PBEI 0x00000001
-#if MAL_VERSION == 1
-#define MAL_ESR_ONE 0x00080000
-#define MAL_ESR_ONEI 0x00000008
-#elif MAL_VERSION == 2
-#define MAL_ESR_PTE 0x00800000
-#define MAL_ESR_PRE 0x00400000
-#define MAL_ESR_PWE 0x00200000
-#define MAL_ESR_PTEI 0x00000080
-#define MAL_ESR_PREI 0x00000040
-#define MAL_ESR_PWEI 0x00000020
-#else
-#error "Unknown MAL version"
-#endif
-
-#define MAL_IER 0x02
-#define MAL_IER_DE 0x00000010
-#define MAL_IER_OTE 0x00000004
-#define MAL_IER_OE 0x00000002
-#define MAL_IER_PE 0x00000001
-#if MAL_VERSION == 1
-#define MAL_IER_NWE 0x00000008
-#define MAL_IER_SOC_EVENTS MAL_IER_NWE
-#elif MAL_VERSION == 2
-#define MAL_IER_PT 0x00000080
-#define MAL_IER_PRE 0x00000040
-#define MAL_IER_PWE 0x00000020
-#define MAL_IER_SOC_EVENTS (MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE)
-#else
-#error "Unknown MAL version"
-#endif
-#define MAL_IER_EVENTS (MAL_IER_SOC_EVENTS | MAL_IER_OTE | \
- MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE)
-
-#define MAL_TXCASR 0x04
-#define MAL_TXCARR 0x05
-#define MAL_TXEOBISR 0x06
-#define MAL_TXDEIR 0x07
-#define MAL_RXCASR 0x10
-#define MAL_RXCARR 0x11
-#define MAL_RXEOBISR 0x12
-#define MAL_RXDEIR 0x13
-#define MAL_TXCTPR(n) ((n) + 0x20)
-#define MAL_RXCTPR(n) ((n) + 0x40)
-#define MAL_RCBS(n) ((n) + 0x60)
-
-/* In reality MAL can handle TX buffers up to 4095 bytes long,
- * but this isn't a good round number :) --ebs
- */
-#define MAL_MAX_TX_SIZE 4080
-#define MAL_MAX_RX_SIZE 4080
-
-static inline int mal_rx_size(int len)
-{
- len = (len + 0xf) & ~0xf;
- return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len;
-}
-
-static inline int mal_tx_chunks(int len)
-{
- return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE;
-}
-
-#define MAL_CHAN_MASK(n) (0x80000000 >> (n))
-
-/* MAL Buffer Descriptor structure */
-struct mal_descriptor {
- u16 ctrl; /* MAL / Commac status control bits */
- u16 data_len; /* Max length is 4K-1 (12 bits) */
- u32 data_ptr; /* pointer to actual data buffer */
-};
-
-/* the following defines are for the MadMAL status and control registers. */
-/* MADMAL transmit and receive status/control bits */
-#define MAL_RX_CTRL_EMPTY 0x8000
-#define MAL_RX_CTRL_WRAP 0x4000
-#define MAL_RX_CTRL_CM 0x2000
-#define MAL_RX_CTRL_LAST 0x1000
-#define MAL_RX_CTRL_FIRST 0x0800
-#define MAL_RX_CTRL_INTR 0x0400
-#define MAL_RX_CTRL_SINGLE (MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST)
-#define MAL_IS_SINGLE_RX(ctrl) (((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE)
-
-#define MAL_TX_CTRL_READY 0x8000
-#define MAL_TX_CTRL_WRAP 0x4000
-#define MAL_TX_CTRL_CM 0x2000
-#define MAL_TX_CTRL_LAST 0x1000
-#define MAL_TX_CTRL_INTR 0x0400
-
-struct mal_commac_ops {
- void (*poll_tx) (void *dev);
- int (*poll_rx) (void *dev, int budget);
- int (*peek_rx) (void *dev);
- void (*rxde) (void *dev);
-};
-
-struct mal_commac {
- struct mal_commac_ops *ops;
- void *dev;
- struct list_head poll_list;
- int rx_stopped;
-
- u32 tx_chan_mask;
- u32 rx_chan_mask;
- struct list_head list;
-};
-
-struct ibm_ocp_mal {
- dcr_host_t dcrhost;
-
- struct list_head poll_list;
- struct napi_struct napi;
-
- struct list_head list;
- u32 tx_chan_mask;
- u32 rx_chan_mask;
-
- dma_addr_t bd_dma;
- struct mal_descriptor *bd_virt;
-
- struct ocp_def *def;
-};
-
-static inline u32 get_mal_dcrn(struct ibm_ocp_mal *mal, int reg)
-{
- return dcr_read(mal->dcrhost, reg);
-}
-
-static inline void set_mal_dcrn(struct ibm_ocp_mal *mal, int reg, u32 val)
-{
- dcr_write(mal->dcrhost, reg, val);
-}
-
-/* Register MAL devices */
-int mal_init(void) __init;
-void mal_exit(void) __exit;
-
-int mal_register_commac(struct ibm_ocp_mal *mal,
- struct mal_commac *commac) __init;
-void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac);
-int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size);
-
-/* Returns BD ring offset for a particular channel
- (in 'struct mal_descriptor' elements)
-*/
-int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel);
-int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel);
-
-void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel);
-void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel);
-void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel);
-void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel);
-
-/* Add/remove EMAC to/from MAL polling list */
-void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac);
-void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac);
-
-/* Ethtool MAL registers */
-struct ibm_mal_regs {
- u32 tx_count;
- u32 rx_count;
-
- u32 cfg;
- u32 esr;
- u32 ier;
- u32 tx_casr;
- u32 tx_carr;
- u32 tx_eobisr;
- u32 tx_deir;
- u32 rx_casr;
- u32 rx_carr;
- u32 rx_eobisr;
- u32 rx_deir;
- u32 tx_ctpr[32];
- u32 rx_ctpr[32];
- u32 rcbs[32];
-};
-
-int mal_get_regs_len(struct ibm_ocp_mal *mal);
-void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf);
-
-#endif /* __IBM_EMAC_MAL_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c
deleted file mode 100644
index e57862b34ca..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_phy.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_phy.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
- * Borrowed from sungem_phy.c, though I only kept the generic MII
- * driver for now.
- *
- * This file should be shared with other drivers or eventually
- * merged as the "low level" part of miilib
- *
- * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
- * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-
-#include <asm/ocp.h>
-
-#include "ibm_emac_core.h"
-#include "ibm_emac_phy.h"
-
-static inline int phy_read(struct mii_phy *phy, int reg)
-{
- return phy->mdio_read(phy->dev, phy->address, reg);
-}
-
-static inline void phy_write(struct mii_phy *phy, int reg, int val)
-{
- phy->mdio_write(phy->dev, phy->address, reg, val);
-}
-
-/*
- * polls MII_BMCR until BMCR_RESET bit clears or operation times out.
- *
- * returns:
- * >= 0 => success, value in BMCR returned to caller
- * -EBUSY => failure, RESET bit never cleared
- * otherwise => failure, lower level PHY read failed
- */
-static int mii_spin_reset_complete(struct mii_phy *phy)
-{
- int val;
- int limit = 10000;
-
- while (limit--) {
- val = phy_read(phy, MII_BMCR);
- if (val >= 0 && !(val & BMCR_RESET))
- return val; /* success */
- udelay(10);
- }
- if (val & BMCR_RESET)
- val = -EBUSY;
-
- if (net_ratelimit())
- printk(KERN_ERR "emac%d: PHY reset timeout (%d)\n",
- ((struct ocp_enet_private *)phy->dev->priv)->def->index,
- val);
- return val;
-}
-
-int mii_reset_phy(struct mii_phy *phy)
-{
- int val;
-
- val = phy_read(phy, MII_BMCR);
- val &= ~BMCR_ISOLATE;
- val |= BMCR_RESET;
- phy_write(phy, MII_BMCR, val);
-
- udelay(300);
-
- val = mii_spin_reset_complete(phy);
- if (val >= 0 && (val & BMCR_ISOLATE))
- phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
-
- return val < 0;
-}
-
-static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
-{
- int ctl, adv;
-
- phy->autoneg = AUTONEG_ENABLE;
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = phy->asym_pause = 0;
- phy->advertising = advertise;
-
- /* Setup standard advertise */
- adv = phy_read(phy, MII_ADVERTISE);
- if (adv < 0)
- return adv;
- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
- ADVERTISE_PAUSE_ASYM);
- if (advertise & ADVERTISED_10baseT_Half)
- adv |= ADVERTISE_10HALF;
- if (advertise & ADVERTISED_10baseT_Full)
- adv |= ADVERTISE_10FULL;
- if (advertise & ADVERTISED_100baseT_Half)
- adv |= ADVERTISE_100HALF;
- if (advertise & ADVERTISED_100baseT_Full)
- adv |= ADVERTISE_100FULL;
- if (advertise & ADVERTISED_Pause)
- adv |= ADVERTISE_PAUSE_CAP;
- if (advertise & ADVERTISED_Asym_Pause)
- adv |= ADVERTISE_PAUSE_ASYM;
- phy_write(phy, MII_ADVERTISE, adv);
-
- if (phy->features &
- (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
- adv = phy_read(phy, MII_CTRL1000);
- if (adv < 0)
- return adv;
- adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
- if (advertise & ADVERTISED_1000baseT_Full)
- adv |= ADVERTISE_1000FULL;
- if (advertise & ADVERTISED_1000baseT_Half)
- adv |= ADVERTISE_1000HALF;
- phy_write(phy, MII_CTRL1000, adv);
- }
-
- /* Start/Restart aneg */
- /* on some PHYs (e.g. National DP83843) a write to MII_ADVERTISE
- * causes BMCR_RESET to be set on the next read of MII_BMCR, which
- * if not checked for causes the PHY to be reset below */
- ctl = mii_spin_reset_complete(phy);
- if (ctl < 0)
- return ctl;
-
- ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
-{
- int ctl;
-
- phy->autoneg = AUTONEG_DISABLE;
- phy->speed = speed;
- phy->duplex = fd;
- phy->pause = phy->asym_pause = 0;
-
- /* First reset the PHY */
- mii_reset_phy(phy);
-
- ctl = phy_read(phy, MII_BMCR);
- if (ctl < 0)
- return ctl;
- ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE | BMCR_SPEED1000);
-
- /* Select speed & duplex */
- switch (speed) {
- case SPEED_10:
- break;
- case SPEED_100:
- ctl |= BMCR_SPEED100;
- break;
- case SPEED_1000:
- ctl |= BMCR_SPEED1000;
- break;
- default:
- return -EINVAL;
- }
- if (fd == DUPLEX_FULL)
- ctl |= BMCR_FULLDPLX;
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_poll_link(struct mii_phy *phy)
-{
- int status;
-
- /* Clear latched value with dummy read */
- phy_read(phy, MII_BMSR);
- status = phy_read(phy, MII_BMSR);
- if (status < 0 || (status & BMSR_LSTATUS) == 0)
- return 0;
- if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
- return 0;
- return 1;
-}
-
-static int genmii_read_link(struct mii_phy *phy)
-{
- if (phy->autoneg == AUTONEG_ENABLE) {
- int glpa = 0;
- int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
- if (lpa < 0)
- return lpa;
-
- if (phy->features &
- (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
- int adv = phy_read(phy, MII_CTRL1000);
- glpa = phy_read(phy, MII_STAT1000);
-
- if (glpa < 0 || adv < 0)
- return adv;
-
- glpa &= adv << 2;
- }
-
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = phy->asym_pause = 0;
-
- if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
- phy->speed = SPEED_1000;
- if (glpa & LPA_1000FULL)
- phy->duplex = DUPLEX_FULL;
- } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
- phy->speed = SPEED_100;
- if (lpa & LPA_100FULL)
- phy->duplex = DUPLEX_FULL;
- } else if (lpa & LPA_10FULL)
- phy->duplex = DUPLEX_FULL;
-
- if (phy->duplex == DUPLEX_FULL) {
- phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
- phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
- }
- } else {
- int bmcr = phy_read(phy, MII_BMCR);
- if (bmcr < 0)
- return bmcr;
-
- if (bmcr & BMCR_FULLDPLX)
- phy->duplex = DUPLEX_FULL;
- else
- phy->duplex = DUPLEX_HALF;
- if (bmcr & BMCR_SPEED1000)
- phy->speed = SPEED_1000;
- else if (bmcr & BMCR_SPEED100)
- phy->speed = SPEED_100;
- else
- phy->speed = SPEED_10;
-
- phy->pause = phy->asym_pause = 0;
- }
- return 0;
-}
-
-/* Generic implementation for most 10/100/1000 PHYs */
-static struct mii_phy_ops generic_phy_ops = {
- .setup_aneg = genmii_setup_aneg,
- .setup_forced = genmii_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = genmii_read_link
-};
-
-static struct mii_phy_def genmii_phy_def = {
- .phy_id = 0x00000000,
- .phy_id_mask = 0x00000000,
- .name = "Generic MII",
- .ops = &generic_phy_ops
-};
-
-/* CIS8201 */
-#define MII_CIS8201_10BTCSR 0x16
-#define TENBTCSR_ECHO_DISABLE 0x2000
-#define MII_CIS8201_EPCR 0x17
-#define EPCR_MODE_MASK 0x3000
-#define EPCR_GMII_MODE 0x0000
-#define EPCR_RGMII_MODE 0x1000
-#define EPCR_TBI_MODE 0x2000
-#define EPCR_RTBI_MODE 0x3000
-#define MII_CIS8201_ACSR 0x1c
-#define ACSR_PIN_PRIO_SELECT 0x0004
-
-static int cis8201_init(struct mii_phy *phy)
-{
- int epcr;
-
- epcr = phy_read(phy, MII_CIS8201_EPCR);
- if (epcr < 0)
- return epcr;
-
- epcr &= ~EPCR_MODE_MASK;
-
- switch (phy->mode) {
- case PHY_MODE_TBI:
- epcr |= EPCR_TBI_MODE;
- break;
- case PHY_MODE_RTBI:
- epcr |= EPCR_RTBI_MODE;
- break;
- case PHY_MODE_GMII:
- epcr |= EPCR_GMII_MODE;
- break;
- case PHY_MODE_RGMII:
- default:
- epcr |= EPCR_RGMII_MODE;
- }
-
- phy_write(phy, MII_CIS8201_EPCR, epcr);
-
- /* MII regs override strap pins */
- phy_write(phy, MII_CIS8201_ACSR,
- phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT);
-
- /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */
- phy_write(phy, MII_CIS8201_10BTCSR,
- phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE);
-
- return 0;
-}
-
-static struct mii_phy_ops cis8201_phy_ops = {
- .init = cis8201_init,
- .setup_aneg = genmii_setup_aneg,
- .setup_forced = genmii_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = genmii_read_link
-};
-
-static struct mii_phy_def cis8201_phy_def = {
- .phy_id = 0x000fc410,
- .phy_id_mask = 0x000ffff0,
- .name = "CIS8201 Gigabit Ethernet",
- .ops = &cis8201_phy_ops
-};
-
-static struct mii_phy_def *mii_phy_table[] = {
- &cis8201_phy_def,
- &genmii_phy_def,
- NULL
-};
-
-int mii_phy_probe(struct mii_phy *phy, int address)
-{
- struct mii_phy_def *def;
- int i;
- int id;
-
- phy->autoneg = AUTONEG_DISABLE;
- phy->advertising = 0;
- phy->address = address;
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = phy->asym_pause = 0;
-
- /* Take PHY out of isolate mode and reset it. */
- if (mii_reset_phy(phy))
- return -ENODEV;
-
- /* Read ID and find matching entry */
- id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
- if (id < 0)
- return -ENODEV;
- for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
- if ((id & def->phy_id_mask) == def->phy_id)
- break;
- /* Should never be NULL (we have a generic entry), but... */
- if (!def)
- return -ENODEV;
-
- phy->def = def;
-
- /* Determine PHY features if needed */
- phy->features = def->features;
- if (!phy->features) {
- u16 bmsr = phy_read(phy, MII_BMSR);
- if (bmsr & BMSR_ANEGCAPABLE)
- phy->features |= SUPPORTED_Autoneg;
- if (bmsr & BMSR_10HALF)
- phy->features |= SUPPORTED_10baseT_Half;
- if (bmsr & BMSR_10FULL)
- phy->features |= SUPPORTED_10baseT_Full;
- if (bmsr & BMSR_100HALF)
- phy->features |= SUPPORTED_100baseT_Half;
- if (bmsr & BMSR_100FULL)
- phy->features |= SUPPORTED_100baseT_Full;
- if (bmsr & BMSR_ESTATEN) {
- u16 esr = phy_read(phy, MII_ESTATUS);
- if (esr & ESTATUS_1000_TFULL)
- phy->features |= SUPPORTED_1000baseT_Full;
- if (esr & ESTATUS_1000_THALF)
- phy->features |= SUPPORTED_1000baseT_Half;
- }
- phy->features |= SUPPORTED_MII;
- }
-
- /* Setup default advertising */
- phy->advertising = phy->features;
-
- return 0;
-}
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h
deleted file mode 100644
index a70e0fea54c..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_phy.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_phy.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, PHY support
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * February 2003
- *
- * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This file basically duplicates sungem_phy.{c,h} with different PHYs
- * supported. I'm looking into merging that in a single mii layer more
- * flexible than mii.c
- */
-
-#ifndef _IBM_OCP_PHY_H_
-#define _IBM_OCP_PHY_H_
-
-struct mii_phy;
-
-/* Operations supported by any kind of PHY */
-struct mii_phy_ops {
- int (*init) (struct mii_phy * phy);
- int (*suspend) (struct mii_phy * phy, int wol_options);
- int (*setup_aneg) (struct mii_phy * phy, u32 advertise);
- int (*setup_forced) (struct mii_phy * phy, int speed, int fd);
- int (*poll_link) (struct mii_phy * phy);
- int (*read_link) (struct mii_phy * phy);
-};
-
-/* Structure used to statically define an mii/gii based PHY */
-struct mii_phy_def {
- u32 phy_id; /* Concatenated ID1 << 16 | ID2 */
- u32 phy_id_mask; /* Significant bits */
- u32 features; /* Ethtool SUPPORTED_* defines or
- 0 for autodetect */
- int magic_aneg; /* Autoneg does all speed test for us */
- const char *name;
- const struct mii_phy_ops *ops;
-};
-
-/* An instance of a PHY, partially borrowed from mii_if_info */
-struct mii_phy {
- struct mii_phy_def *def;
- u32 advertising; /* Ethtool ADVERTISED_* defines */
- u32 features; /* Copied from mii_phy_def.features
- or determined automaticaly */
- int address; /* PHY address */
- int mode; /* PHY mode */
-
- /* 1: autoneg enabled, 0: disabled */
- int autoneg;
-
- /* forced speed & duplex (no autoneg)
- * partner speed & duplex & pause (autoneg)
- */
- int speed;
- int duplex;
- int pause;
- int asym_pause;
-
- /* Provided by host chip */
- struct net_device *dev;
- int (*mdio_read) (struct net_device * dev, int addr, int reg);
- void (*mdio_write) (struct net_device * dev, int addr, int reg,
- int val);
-};
-
-/* Pass in a struct mii_phy with dev, mdio_read and mdio_write
- * filled, the remaining fields will be filled on return
- */
-int mii_phy_probe(struct mii_phy *phy, int address);
-int mii_reset_phy(struct mii_phy *phy);
-
-#endif /* _IBM_OCP_PHY_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.c b/drivers/net/ibm_emac/ibm_emac_rgmii.c
deleted file mode 100644
index 9dbb5e5936c..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_rgmii.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_rgmii.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#include <linux/kernel.h>
-#include <linux/ethtool.h>
-#include <asm/io.h>
-
-#include "ibm_emac_core.h"
-#include "ibm_emac_debug.h"
-
-/* RGMIIx_FER */
-#define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4))
-#define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4))
-#define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4))
-#define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4))
-#define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4))
-
-/* RGMIIx_SSR */
-#define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8))
-#define RGMII_SSR_100(idx) (0x2 << ((idx) * 8))
-#define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8))
-
-/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */
-static inline int rgmii_valid_mode(int phy_mode)
-{
- return phy_mode == PHY_MODE_GMII ||
- phy_mode == PHY_MODE_RGMII ||
- phy_mode == PHY_MODE_TBI ||
- phy_mode == PHY_MODE_RTBI;
-}
-
-static inline const char *rgmii_mode_name(int mode)
-{
- switch (mode) {
- case PHY_MODE_RGMII:
- return "RGMII";
- case PHY_MODE_TBI:
- return "TBI";
- case PHY_MODE_GMII:
- return "GMII";
- case PHY_MODE_RTBI:
- return "RTBI";
- default:
- BUG();
- }
-}
-
-static inline u32 rgmii_mode_mask(int mode, int input)
-{
- switch (mode) {
- case PHY_MODE_RGMII:
- return RGMII_FER_RGMII(input);
- case PHY_MODE_TBI:
- return RGMII_FER_TBI(input);
- case PHY_MODE_GMII:
- return RGMII_FER_GMII(input);
- case PHY_MODE_RTBI:
- return RGMII_FER_RTBI(input);
- default:
- BUG();
- }
-}
-
-static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode)
-{
- struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
- struct rgmii_regs *p;
-
- RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode);
-
- if (!dev) {
- dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
- if (!dev) {
- printk(KERN_ERR
- "rgmii%d: couldn't allocate device structure!\n",
- ocpdev->def->index);
- return -ENOMEM;
- }
-
- p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr,
- sizeof(struct rgmii_regs));
- if (!p) {
- printk(KERN_ERR
- "rgmii%d: could not ioremap device registers!\n",
- ocpdev->def->index);
- kfree(dev);
- return -ENOMEM;
- }
-
- dev->base = p;
- ocp_set_drvdata(ocpdev, dev);
-
- /* Disable all inputs by default */
- out_be32(&p->fer, 0);
- } else
- p = dev->base;
-
- /* Enable this input */
- out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input));
-
- printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
- ocpdev->def->index, input, rgmii_mode_name(mode));
-
- ++dev->users;
- return 0;
-}
-
-int __init rgmii_attach(void *emac)
-{
- struct ocp_enet_private *dev = emac;
- struct ocp_func_emac_data *emacdata = dev->def->additions;
-
- /* Check if we need to attach to a RGMII */
- if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) {
- dev->rgmii_input = emacdata->rgmii_mux;
- dev->rgmii_dev =
- ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII,
- emacdata->rgmii_idx);
- if (!dev->rgmii_dev) {
- printk(KERN_ERR "emac%d: unknown rgmii%d!\n",
- dev->def->index, emacdata->rgmii_idx);
- return -ENODEV;
- }
- if (rgmii_init
- (dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) {
- printk(KERN_ERR
- "emac%d: rgmii%d initialization failed!\n",
- dev->def->index, emacdata->rgmii_idx);
- return -ENODEV;
- }
- }
- return 0;
-}
-
-void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
-{
- struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
- u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input);
-
- RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
-
- if (speed == SPEED_1000)
- ssr |= RGMII_SSR_1000(input);
- else if (speed == SPEED_100)
- ssr |= RGMII_SSR_100(input);
-
- out_be32(&dev->base->ssr, ssr);
-}
-
-void __rgmii_fini(struct ocp_device *ocpdev, int input)
-{
- struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
- BUG_ON(!dev || dev->users == 0);
-
- RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
-
- /* Disable this input */
- out_be32(&dev->base->fer,
- in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input));
-
- if (!--dev->users) {
- /* Free everything if this is the last user */
- ocp_set_drvdata(ocpdev, NULL);
- iounmap((void *)dev->base);
- kfree(dev);
- }
-}
-
-int __rgmii_get_regs_len(struct ocp_device *ocpdev)
-{
- return sizeof(struct emac_ethtool_regs_subhdr) +
- sizeof(struct rgmii_regs);
-}
-
-void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf)
-{
- struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
- struct emac_ethtool_regs_subhdr *hdr = buf;
- struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1);
-
- hdr->version = 0;
- hdr->index = ocpdev->def->index;
- memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs));
- return regs + 1;
-}
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h
deleted file mode 100644
index 971e45815c6..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_rgmii.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_rgmii.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
- *
- * Based on ocp_zmii.h/ibm_emac_zmii.h
- * Armin Kuster akuster@mvista.com
- *
- * Copyright 2004 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef _IBM_EMAC_RGMII_H_
-#define _IBM_EMAC_RGMII_H_
-
-
-/* RGMII bridge */
-struct rgmii_regs {
- u32 fer; /* Function enable register */
- u32 ssr; /* Speed select register */
-};
-
-/* RGMII device */
-struct ibm_ocp_rgmii {
- struct rgmii_regs __iomem *base;
- int users; /* number of EMACs using this RGMII bridge */
-};
-
-#ifdef CONFIG_IBM_EMAC_RGMII
-int rgmii_attach(void *emac) __init;
-
-void __rgmii_fini(struct ocp_device *ocpdev, int input);
-static inline void rgmii_fini(struct ocp_device *ocpdev, int input)
-{
- if (ocpdev)
- __rgmii_fini(ocpdev, input);
-}
-
-void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
-
-int __rgmii_get_regs_len(struct ocp_device *ocpdev);
-static inline int rgmii_get_regs_len(struct ocp_device *ocpdev)
-{
- return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0;
-}
-
-void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf);
-#else
-# define rgmii_attach(x) 0
-# define rgmii_fini(x,y) ((void)0)
-# define rgmii_set_speed(x,y,z) ((void)0)
-# define rgmii_get_regs_len(x) 0
-# define rgmii_dump_regs(x,buf) (buf)
-#endif /* !CONFIG_IBM_EMAC_RGMII */
-
-#endif /* _IBM_EMAC_RGMII_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.c b/drivers/net/ibm_emac/ibm_emac_tah.c
deleted file mode 100644
index 3c2d5ba522a..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_tah.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_tah.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
- *
- * Copyright 2004 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <asm/io.h>
-
-#include "ibm_emac_core.h"
-
-static int __init tah_init(struct ocp_device *ocpdev)
-{
- struct tah_regs *p;
-
- if (ocp_get_drvdata(ocpdev)) {
- printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index);
- return -EBUSY;
- }
-
- /* Initialize TAH and enable IPv4 checksum verification, no TSO yet */
- p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p));
- if (!p) {
- printk(KERN_ERR "tah%d: could not ioremap device registers!\n",
- ocpdev->def->index);
- return -ENOMEM;
- }
- ocp_set_drvdata(ocpdev, p);
- __tah_reset(ocpdev);
-
- return 0;
-}
-
-int __init tah_attach(void *emac)
-{
- struct ocp_enet_private *dev = emac;
- struct ocp_func_emac_data *emacdata = dev->def->additions;
-
- /* Check if we need to attach to a TAH */
- if (emacdata->tah_idx >= 0) {
- dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
- emacdata->tah_idx);
- if (!dev->tah_dev) {
- printk(KERN_ERR "emac%d: unknown tah%d!\n",
- dev->def->index, emacdata->tah_idx);
- return -ENODEV;
- }
- if (tah_init(dev->tah_dev)) {
- printk(KERN_ERR
- "emac%d: tah%d initialization failed!\n",
- dev->def->index, emacdata->tah_idx);
- return -ENODEV;
- }
- }
- return 0;
-}
-
-void __tah_fini(struct ocp_device *ocpdev)
-{
- struct tah_regs *p = ocp_get_drvdata(ocpdev);
- BUG_ON(!p);
- ocp_set_drvdata(ocpdev, NULL);
- iounmap((void *)p);
-}
-
-void __tah_reset(struct ocp_device *ocpdev)
-{
- struct tah_regs *p = ocp_get_drvdata(ocpdev);
- int n;
-
- /* Reset TAH */
- out_be32(&p->mr, TAH_MR_SR);
- n = 100;
- while ((in_be32(&p->mr) & TAH_MR_SR) && n)
- --n;
-
- if (unlikely(!n))
- printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index);
-
- /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
- out_be32(&p->mr,
- TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
- TAH_MR_DIG);
-}
-
-int __tah_get_regs_len(struct ocp_device *ocpdev)
-{
- return sizeof(struct emac_ethtool_regs_subhdr) +
- sizeof(struct tah_regs);
-}
-
-void *tah_dump_regs(struct ocp_device *ocpdev, void *buf)
-{
- struct tah_regs *dev = ocp_get_drvdata(ocpdev);
- struct emac_ethtool_regs_subhdr *hdr = buf;
- struct tah_regs *regs = (struct tah_regs *)(hdr + 1);
-
- hdr->version = 0;
- hdr->index = ocpdev->def->index;
- memcpy_fromio(regs, dev, sizeof(struct tah_regs));
- return regs + 1;
-}
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h
deleted file mode 100644
index ccf64915e1e..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_tah.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_tah.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
- *
- * Copyright 2004 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef _IBM_EMAC_TAH_H
-#define _IBM_EMAC_TAH_H
-
-#include <linux/init.h>
-#include <asm/ocp.h>
-
-/* TAH */
-struct tah_regs {
- u32 revid;
- u32 pad[3];
- u32 mr;
- u32 ssr0;
- u32 ssr1;
- u32 ssr2;
- u32 ssr3;
- u32 ssr4;
- u32 ssr5;
- u32 tsr;
-};
-
-/* TAH engine */
-#define TAH_MR_CVR 0x80000000
-#define TAH_MR_SR 0x40000000
-#define TAH_MR_ST_256 0x01000000
-#define TAH_MR_ST_512 0x02000000
-#define TAH_MR_ST_768 0x03000000
-#define TAH_MR_ST_1024 0x04000000
-#define TAH_MR_ST_1280 0x05000000
-#define TAH_MR_ST_1536 0x06000000
-#define TAH_MR_TFS_16KB 0x00000000
-#define TAH_MR_TFS_2KB 0x00200000
-#define TAH_MR_TFS_4KB 0x00400000
-#define TAH_MR_TFS_6KB 0x00600000
-#define TAH_MR_TFS_8KB 0x00800000
-#define TAH_MR_TFS_10KB 0x00a00000
-#define TAH_MR_DTFP 0x00100000
-#define TAH_MR_DIG 0x00080000
-
-#ifdef CONFIG_IBM_EMAC_TAH
-int tah_attach(void *emac) __init;
-
-void __tah_fini(struct ocp_device *ocpdev);
-static inline void tah_fini(struct ocp_device *ocpdev)
-{
- if (ocpdev)
- __tah_fini(ocpdev);
-}
-
-void __tah_reset(struct ocp_device *ocpdev);
-static inline void tah_reset(struct ocp_device *ocpdev)
-{
- if (ocpdev)
- __tah_reset(ocpdev);
-}
-
-int __tah_get_regs_len(struct ocp_device *ocpdev);
-static inline int tah_get_regs_len(struct ocp_device *ocpdev)
-{
- return ocpdev ? __tah_get_regs_len(ocpdev) : 0;
-}
-
-void *tah_dump_regs(struct ocp_device *ocpdev, void *buf);
-#else
-# define tah_attach(x) 0
-# define tah_fini(x) ((void)0)
-# define tah_reset(x) ((void)0)
-# define tah_get_regs_len(x) 0
-# define tah_dump_regs(x,buf) (buf)
-#endif /* !CONFIG_IBM_EMAC_TAH */
-
-#endif /* _IBM_EMAC_TAH_H */
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c
deleted file mode 100644
index 2c0fdb0cabf..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_zmii.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_zmii.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- * Armin Kuster <akuster@mvista.com>
- * Copyright 2001 MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#include <linux/kernel.h>
-#include <linux/ethtool.h>
-#include <asm/io.h>
-
-#include "ibm_emac_core.h"
-#include "ibm_emac_debug.h"
-
-/* ZMIIx_FER */
-#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4))
-#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \
- ZMII_FER_MDI(2) | ZMII_FER_MDI(3))
-
-#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4))
-#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4))
-#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4))
-
-/* ZMIIx_SSR */
-#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4))
-#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4))
-#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4))
-
-/* ZMII only supports MII, RMII and SMII
- * we also support autodetection for backward compatibility
- */
-static inline int zmii_valid_mode(int mode)
-{
- return mode == PHY_MODE_MII ||
- mode == PHY_MODE_RMII ||
- mode == PHY_MODE_SMII ||
- mode == PHY_MODE_NA;
-}
-
-static inline const char *zmii_mode_name(int mode)
-{
- switch (mode) {
- case PHY_MODE_MII:
- return "MII";
- case PHY_MODE_RMII:
- return "RMII";
- case PHY_MODE_SMII:
- return "SMII";
- default:
- BUG();
- }
-}
-
-static inline u32 zmii_mode_mask(int mode, int input)
-{
- switch (mode) {
- case PHY_MODE_MII:
- return ZMII_FER_MII(input);
- case PHY_MODE_RMII:
- return ZMII_FER_RMII(input);
- case PHY_MODE_SMII:
- return ZMII_FER_SMII(input);
- default:
- return 0;
- }
-}
-
-static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode)
-{
- struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
- struct zmii_regs __iomem *p;
-
- ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode);
-
- if (!dev) {
- dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
- if (!dev) {
- printk(KERN_ERR
- "zmii%d: couldn't allocate device structure!\n",
- ocpdev->def->index);
- return -ENOMEM;
- }
- dev->mode = PHY_MODE_NA;
-
- p = ioremap(ocpdev->def->paddr, sizeof(struct zmii_regs));
- if (!p) {
- printk(KERN_ERR
- "zmii%d: could not ioremap device registers!\n",
- ocpdev->def->index);
- kfree(dev);
- return -ENOMEM;
- }
- dev->base = p;
- ocp_set_drvdata(ocpdev, dev);
-
- /* We may need FER value for autodetection later */
- dev->fer_save = in_be32(&p->fer);
-
- /* Disable all inputs by default */
- out_be32(&p->fer, 0);
- } else
- p = dev->base;
-
- if (!zmii_valid_mode(*mode)) {
- /* Probably an EMAC connected to RGMII,
- * but it still may need ZMII for MDIO
- */
- goto out;
- }
-
- /* Autodetect ZMII mode if not specified.
- * This is only for backward compatibility with the old driver.
- * Please, always specify PHY mode in your board port to avoid
- * any surprises.
- */
- if (dev->mode == PHY_MODE_NA) {
- if (*mode == PHY_MODE_NA) {
- u32 r = dev->fer_save;
-
- ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL,
- ocpdev->def->index, r);
-
- if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1)))
- dev->mode = PHY_MODE_MII;
- else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1)))
- dev->mode = PHY_MODE_RMII;
- else
- dev->mode = PHY_MODE_SMII;
- } else
- dev->mode = *mode;
-
- printk(KERN_NOTICE "zmii%d: bridge in %s mode\n",
- ocpdev->def->index, zmii_mode_name(dev->mode));
- } else {
- /* All inputs must use the same mode */
- if (*mode != PHY_MODE_NA && *mode != dev->mode) {
- printk(KERN_ERR
- "zmii%d: invalid mode %d specified for input %d\n",
- ocpdev->def->index, *mode, input);
- return -EINVAL;
- }
- }
-
- /* Report back correct PHY mode,
- * it may be used during PHY initialization.
- */
- *mode = dev->mode;
-
- /* Enable this input */
- out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input));
- out:
- ++dev->users;
- return 0;
-}
-
-int __init zmii_attach(void *emac)
-{
- struct ocp_enet_private *dev = emac;
- struct ocp_func_emac_data *emacdata = dev->def->additions;
-
- if (emacdata->zmii_idx >= 0) {
- dev->zmii_input = emacdata->zmii_mux;
- dev->zmii_dev =
- ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII,
- emacdata->zmii_idx);
- if (!dev->zmii_dev) {
- printk(KERN_ERR "emac%d: unknown zmii%d!\n",
- dev->def->index, emacdata->zmii_idx);
- return -ENODEV;
- }
- if (zmii_init
- (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) {
- printk(KERN_ERR
- "emac%d: zmii%d initialization failed!\n",
- dev->def->index, emacdata->zmii_idx);
- return -ENODEV;
- }
- }
- return 0;
-}
-
-void __zmii_enable_mdio(struct ocp_device *ocpdev, int input)
-{
- struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
- u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL;
-
- ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input);
-
- out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input));
-}
-
-void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
-{
- struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
- u32 ssr = in_be32(&dev->base->ssr);
-
- ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
-
- if (speed == SPEED_100)
- ssr |= ZMII_SSR_SP(input);
- else
- ssr &= ~ZMII_SSR_SP(input);
-
- out_be32(&dev->base->ssr, ssr);
-}
-
-void __zmii_fini(struct ocp_device *ocpdev, int input)
-{
- struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
- BUG_ON(!dev || dev->users == 0);
-
- ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
-
- /* Disable this input */
- out_be32(&dev->base->fer,
- in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input));
-
- if (!--dev->users) {
- /* Free everything if this is the last user */
- ocp_set_drvdata(ocpdev, NULL);
- iounmap(dev->base);
- kfree(dev);
- }
-}
-
-int __zmii_get_regs_len(struct ocp_device *ocpdev)
-{
- return sizeof(struct emac_ethtool_regs_subhdr) +
- sizeof(struct zmii_regs);
-}
-
-void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf)
-{
- struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
- struct emac_ethtool_regs_subhdr *hdr = buf;
- struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1);
-
- hdr->version = 0;
- hdr->index = ocpdev->def->index;
- memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs));
- return regs + 1;
-}
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h
deleted file mode 100644
index fad6d8bf983..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_zmii.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_zmii.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- * Armin Kuster <akuster@mvista.com>
- * Copyright 2001 MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#ifndef _IBM_EMAC_ZMII_H_
-#define _IBM_EMAC_ZMII_H_
-
-#include <linux/init.h>
-#include <asm/ocp.h>
-
-/* ZMII bridge registers */
-struct zmii_regs {
- u32 fer; /* Function enable reg */
- u32 ssr; /* Speed select reg */
- u32 smiirs; /* SMII status reg */
-};
-
-/* ZMII device */
-struct ibm_ocp_zmii {
- struct zmii_regs __iomem *base;
- int mode; /* subset of PHY_MODE_XXXX */
- int users; /* number of EMACs using this ZMII bridge */
- u32 fer_save; /* FER value left by firmware */
-};
-
-#ifdef CONFIG_IBM_EMAC_ZMII
-int zmii_attach(void *emac) __init;
-
-void __zmii_fini(struct ocp_device *ocpdev, int input);
-static inline void zmii_fini(struct ocp_device *ocpdev, int input)
-{
- if (ocpdev)
- __zmii_fini(ocpdev, input);
-}
-
-void __zmii_enable_mdio(struct ocp_device *ocpdev, int input);
-static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input)
-{
- if (ocpdev)
- __zmii_enable_mdio(ocpdev, input);
-}
-
-void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
-static inline void zmii_set_speed(struct ocp_device *ocpdev, int input,
- int speed)
-{
- if (ocpdev)
- __zmii_set_speed(ocpdev, input, speed);
-}
-
-int __zmii_get_regs_len(struct ocp_device *ocpdev);
-static inline int zmii_get_regs_len(struct ocp_device *ocpdev)
-{
- return ocpdev ? __zmii_get_regs_len(ocpdev) : 0;
-}
-
-void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf);
-
-#else
-# define zmii_attach(x) 0
-# define zmii_fini(x,y) ((void)0)
-# define zmii_enable_mdio(x,y) ((void)0)
-# define zmii_set_speed(x,y,z) ((void)0)
-# define zmii_get_regs_len(x) 0
-# define zmii_dump_regs(x,buf) (buf)
-#endif /* !CONFIG_IBM_EMAC_ZMII */
-
-#endif /* _IBM_EMAC_ZMII_H_ */
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index b7915cdcc6a..83a877f3a55 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -34,406 +34,145 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/in.h>
-#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/etherdevice.h>
-
-#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/platform_device.h>
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/mii.h>
-
#include <linux/mv643xx_eth.h>
-
#include <asm/io.h>
#include <asm/types.h>
-#include <asm/pgtable.h>
#include <asm/system.h>
-#include <asm/delay.h>
-#include <asm/dma-mapping.h>
-#define MV643XX_CHECKSUM_OFFLOAD_TX
-#define MV643XX_NAPI
-#define MV643XX_TX_FAST_REFILL
-#undef MV643XX_COAL
+static char mv643xx_eth_driver_name[] = "mv643xx_eth";
+static char mv643xx_eth_driver_version[] = "1.1";
-#define MV643XX_TX_COAL 100
-#ifdef MV643XX_COAL
-#define MV643XX_RX_COAL 100
-#endif
+#define MV643XX_ETH_CHECKSUM_OFFLOAD_TX
+#define MV643XX_ETH_NAPI
+#define MV643XX_ETH_TX_FAST_REFILL
-#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
+#ifdef MV643XX_ETH_CHECKSUM_OFFLOAD_TX
#define MAX_DESCS_PER_SKB (MAX_SKB_FRAGS + 1)
#else
#define MAX_DESCS_PER_SKB 1
#endif
-#define ETH_VLAN_HLEN 4
-#define ETH_FCS_LEN 4
-#define ETH_HW_IP_ALIGN 2 /* hw aligns IP header */
-#define ETH_WRAPPER_LEN (ETH_HW_IP_ALIGN + ETH_HLEN + \
- ETH_VLAN_HLEN + ETH_FCS_LEN)
-#define ETH_RX_SKB_SIZE (dev->mtu + ETH_WRAPPER_LEN + \
- dma_get_cache_alignment())
-
/*
* Registers shared between all ports.
*/
-#define PHY_ADDR_REG 0x0000
-#define SMI_REG 0x0004
-#define WINDOW_BASE(i) (0x0200 + ((i) << 3))
-#define WINDOW_SIZE(i) (0x0204 + ((i) << 3))
-#define WINDOW_REMAP_HIGH(i) (0x0280 + ((i) << 2))
-#define WINDOW_BAR_ENABLE 0x0290
-#define WINDOW_PROTECT(i) (0x0294 + ((i) << 4))
+#define PHY_ADDR 0x0000
+#define SMI_REG 0x0004
+#define WINDOW_BASE(w) (0x0200 + ((w) << 3))
+#define WINDOW_SIZE(w) (0x0204 + ((w) << 3))
+#define WINDOW_REMAP_HIGH(w) (0x0280 + ((w) << 2))
+#define WINDOW_BAR_ENABLE 0x0290
+#define WINDOW_PROTECT(w) (0x0294 + ((w) << 4))
/*
* Per-port registers.
*/
-#define PORT_CONFIG_REG(p) (0x0400 + ((p) << 10))
-#define PORT_CONFIG_EXTEND_REG(p) (0x0404 + ((p) << 10))
-#define MAC_ADDR_LOW(p) (0x0414 + ((p) << 10))
-#define MAC_ADDR_HIGH(p) (0x0418 + ((p) << 10))
-#define SDMA_CONFIG_REG(p) (0x041c + ((p) << 10))
-#define PORT_SERIAL_CONTROL_REG(p) (0x043c + ((p) << 10))
-#define PORT_STATUS_REG(p) (0x0444 + ((p) << 10))
-#define TRANSMIT_QUEUE_COMMAND_REG(p) (0x0448 + ((p) << 10))
-#define MAXIMUM_TRANSMIT_UNIT(p) (0x0458 + ((p) << 10))
-#define INTERRUPT_CAUSE_REG(p) (0x0460 + ((p) << 10))
-#define INTERRUPT_CAUSE_EXTEND_REG(p) (0x0464 + ((p) << 10))
-#define INTERRUPT_MASK_REG(p) (0x0468 + ((p) << 10))
-#define INTERRUPT_EXTEND_MASK_REG(p) (0x046c + ((p) << 10))
-#define TX_FIFO_URGENT_THRESHOLD_REG(p) (0x0474 + ((p) << 10))
-#define RX_CURRENT_QUEUE_DESC_PTR_0(p) (0x060c + ((p) << 10))
-#define RECEIVE_QUEUE_COMMAND_REG(p) (0x0680 + ((p) << 10))
-#define TX_CURRENT_QUEUE_DESC_PTR_0(p) (0x06c0 + ((p) << 10))
-#define MIB_COUNTERS_BASE(p) (0x1000 + ((p) << 7))
-#define DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(p) (0x1400 + ((p) << 10))
-#define DA_FILTER_OTHER_MULTICAST_TABLE_BASE(p) (0x1500 + ((p) << 10))
-#define DA_FILTER_UNICAST_TABLE_BASE(p) (0x1600 + ((p) << 10))
-
-/* These macros describe Ethernet Port configuration reg (Px_cR) bits */
-#define UNICAST_NORMAL_MODE (0 << 0)
-#define UNICAST_PROMISCUOUS_MODE (1 << 0)
-#define DEFAULT_RX_QUEUE(queue) ((queue) << 1)
-#define DEFAULT_RX_ARP_QUEUE(queue) ((queue) << 4)
-#define RECEIVE_BC_IF_NOT_IP_OR_ARP (0 << 7)
-#define REJECT_BC_IF_NOT_IP_OR_ARP (1 << 7)
-#define RECEIVE_BC_IF_IP (0 << 8)
-#define REJECT_BC_IF_IP (1 << 8)
-#define RECEIVE_BC_IF_ARP (0 << 9)
-#define REJECT_BC_IF_ARP (1 << 9)
-#define TX_AM_NO_UPDATE_ERROR_SUMMARY (1 << 12)
-#define CAPTURE_TCP_FRAMES_DIS (0 << 14)
-#define CAPTURE_TCP_FRAMES_EN (1 << 14)
-#define CAPTURE_UDP_FRAMES_DIS (0 << 15)
-#define CAPTURE_UDP_FRAMES_EN (1 << 15)
-#define DEFAULT_RX_TCP_QUEUE(queue) ((queue) << 16)
-#define DEFAULT_RX_UDP_QUEUE(queue) ((queue) << 19)
-#define DEFAULT_RX_BPDU_QUEUE(queue) ((queue) << 22)
-
-#define PORT_CONFIG_DEFAULT_VALUE \
- UNICAST_NORMAL_MODE | \
- DEFAULT_RX_QUEUE(0) | \
- DEFAULT_RX_ARP_QUEUE(0) | \
- RECEIVE_BC_IF_NOT_IP_OR_ARP | \
- RECEIVE_BC_IF_IP | \
- RECEIVE_BC_IF_ARP | \
- CAPTURE_TCP_FRAMES_DIS | \
- CAPTURE_UDP_FRAMES_DIS | \
- DEFAULT_RX_TCP_QUEUE(0) | \
- DEFAULT_RX_UDP_QUEUE(0) | \
- DEFAULT_RX_BPDU_QUEUE(0)
-
-/* These macros describe Ethernet Port configuration extend reg (Px_cXR) bits*/
-#define CLASSIFY_EN (1 << 0)
-#define SPAN_BPDU_PACKETS_AS_NORMAL (0 << 1)
-#define SPAN_BPDU_PACKETS_TO_RX_QUEUE_7 (1 << 1)
-#define PARTITION_DISABLE (0 << 2)
-#define PARTITION_ENABLE (1 << 2)
-
-#define PORT_CONFIG_EXTEND_DEFAULT_VALUE \
- SPAN_BPDU_PACKETS_AS_NORMAL | \
- PARTITION_DISABLE
-
-/* These macros describe Ethernet Port Sdma configuration reg (SDCR) bits */
-#define RIFB (1 << 0)
-#define RX_BURST_SIZE_1_64BIT (0 << 1)
-#define RX_BURST_SIZE_2_64BIT (1 << 1)
+#define PORT_CONFIG(p) (0x0400 + ((p) << 10))
+#define UNICAST_PROMISCUOUS_MODE 0x00000001
+#define PORT_CONFIG_EXT(p) (0x0404 + ((p) << 10))
+#define MAC_ADDR_LOW(p) (0x0414 + ((p) << 10))
+#define MAC_ADDR_HIGH(p) (0x0418 + ((p) << 10))
+#define SDMA_CONFIG(p) (0x041c + ((p) << 10))
+#define PORT_SERIAL_CONTROL(p) (0x043c + ((p) << 10))
+#define PORT_STATUS(p) (0x0444 + ((p) << 10))
+#define TX_FIFO_EMPTY 0x00000400
+#define TXQ_COMMAND(p) (0x0448 + ((p) << 10))
+#define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10))
+#define TX_BW_RATE(p) (0x0450 + ((p) << 10))
+#define TX_BW_MTU(p) (0x0458 + ((p) << 10))
+#define TX_BW_BURST(p) (0x045c + ((p) << 10))
+#define INT_CAUSE(p) (0x0460 + ((p) << 10))
+#define INT_TX_END 0x07f80000
+#define INT_RX 0x0007fbfc
+#define INT_EXT 0x00000002
+#define INT_CAUSE_EXT(p) (0x0464 + ((p) << 10))
+#define INT_EXT_LINK 0x00100000
+#define INT_EXT_PHY 0x00010000
+#define INT_EXT_TX_ERROR_0 0x00000100
+#define INT_EXT_TX_0 0x00000001
+#define INT_EXT_TX 0x0000ffff
+#define INT_MASK(p) (0x0468 + ((p) << 10))
+#define INT_MASK_EXT(p) (0x046c + ((p) << 10))
+#define TX_FIFO_URGENT_THRESHOLD(p) (0x0474 + ((p) << 10))
+#define TXQ_FIX_PRIO_CONF_MOVED(p) (0x04dc + ((p) << 10))
+#define TX_BW_RATE_MOVED(p) (0x04e0 + ((p) << 10))
+#define TX_BW_MTU_MOVED(p) (0x04e8 + ((p) << 10))
+#define TX_BW_BURST_MOVED(p) (0x04ec + ((p) << 10))
+#define RXQ_CURRENT_DESC_PTR(p, q) (0x060c + ((p) << 10) + ((q) << 4))
+#define RXQ_COMMAND(p) (0x0680 + ((p) << 10))
+#define TXQ_CURRENT_DESC_PTR(p, q) (0x06c0 + ((p) << 10) + ((q) << 2))
+#define TXQ_BW_TOKENS(p, q) (0x0700 + ((p) << 10) + ((q) << 4))
+#define TXQ_BW_CONF(p, q) (0x0704 + ((p) << 10) + ((q) << 4))
+#define TXQ_BW_WRR_CONF(p, q) (0x0708 + ((p) << 10) + ((q) << 4))
+#define MIB_COUNTERS(p) (0x1000 + ((p) << 7))
+#define SPECIAL_MCAST_TABLE(p) (0x1400 + ((p) << 10))
+#define OTHER_MCAST_TABLE(p) (0x1500 + ((p) << 10))
+#define UNICAST_TABLE(p) (0x1600 + ((p) << 10))
+
+
+/*
+ * SDMA configuration register.
+ */
#define RX_BURST_SIZE_4_64BIT (2 << 1)
-#define RX_BURST_SIZE_8_64BIT (3 << 1)
-#define RX_BURST_SIZE_16_64BIT (4 << 1)
#define BLM_RX_NO_SWAP (1 << 4)
-#define BLM_RX_BYTE_SWAP (0 << 4)
#define BLM_TX_NO_SWAP (1 << 5)
-#define BLM_TX_BYTE_SWAP (0 << 5)
-#define DESCRIPTORS_BYTE_SWAP (1 << 6)
-#define DESCRIPTORS_NO_SWAP (0 << 6)
-#define IPG_INT_RX(value) (((value) & 0x3fff) << 8)
-#define TX_BURST_SIZE_1_64BIT (0 << 22)
-#define TX_BURST_SIZE_2_64BIT (1 << 22)
#define TX_BURST_SIZE_4_64BIT (2 << 22)
-#define TX_BURST_SIZE_8_64BIT (3 << 22)
-#define TX_BURST_SIZE_16_64BIT (4 << 22)
#if defined(__BIG_ENDIAN)
#define PORT_SDMA_CONFIG_DEFAULT_VALUE \
RX_BURST_SIZE_4_64BIT | \
- IPG_INT_RX(0) | \
TX_BURST_SIZE_4_64BIT
#elif defined(__LITTLE_ENDIAN)
#define PORT_SDMA_CONFIG_DEFAULT_VALUE \
RX_BURST_SIZE_4_64BIT | \
BLM_RX_NO_SWAP | \
BLM_TX_NO_SWAP | \
- IPG_INT_RX(0) | \
TX_BURST_SIZE_4_64BIT
#else
#error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
#endif
-/* These macros describe Ethernet Port serial control reg (PSCR) bits */
-#define SERIAL_PORT_DISABLE (0 << 0)
-#define SERIAL_PORT_ENABLE (1 << 0)
-#define DO_NOT_FORCE_LINK_PASS (0 << 1)
-#define FORCE_LINK_PASS (1 << 1)
-#define ENABLE_AUTO_NEG_FOR_DUPLX (0 << 2)
-#define DISABLE_AUTO_NEG_FOR_DUPLX (1 << 2)
-#define ENABLE_AUTO_NEG_FOR_FLOW_CTRL (0 << 3)
-#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL (1 << 3)
-#define ADV_NO_FLOW_CTRL (0 << 4)
-#define ADV_SYMMETRIC_FLOW_CTRL (1 << 4)
-#define FORCE_FC_MODE_NO_PAUSE_DIS_TX (0 << 5)
-#define FORCE_FC_MODE_TX_PAUSE_DIS (1 << 5)
-#define FORCE_BP_MODE_NO_JAM (0 << 7)
-#define FORCE_BP_MODE_JAM_TX (1 << 7)
-#define FORCE_BP_MODE_JAM_TX_ON_RX_ERR (2 << 7)
-#define SERIAL_PORT_CONTROL_RESERVED (1 << 9)
-#define FORCE_LINK_FAIL (0 << 10)
-#define DO_NOT_FORCE_LINK_FAIL (1 << 10)
-#define RETRANSMIT_16_ATTEMPTS (0 << 11)
-#define RETRANSMIT_FOREVER (1 << 11)
-#define ENABLE_AUTO_NEG_SPEED_GMII (0 << 13)
-#define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13)
-#define DTE_ADV_0 (0 << 14)
-#define DTE_ADV_1 (1 << 14)
-#define DISABLE_AUTO_NEG_BYPASS (0 << 15)
-#define ENABLE_AUTO_NEG_BYPASS (1 << 15)
-#define AUTO_NEG_NO_CHANGE (0 << 16)
-#define RESTART_AUTO_NEG (1 << 16)
-#define MAX_RX_PACKET_1518BYTE (0 << 17)
+
+/*
+ * Port serial control register.
+ */
+#define SET_MII_SPEED_TO_100 (1 << 24)
+#define SET_GMII_SPEED_TO_1000 (1 << 23)
+#define SET_FULL_DUPLEX_MODE (1 << 21)
#define MAX_RX_PACKET_1522BYTE (1 << 17)
-#define MAX_RX_PACKET_1552BYTE (2 << 17)
-#define MAX_RX_PACKET_9022BYTE (3 << 17)
-#define MAX_RX_PACKET_9192BYTE (4 << 17)
#define MAX_RX_PACKET_9700BYTE (5 << 17)
#define MAX_RX_PACKET_MASK (7 << 17)
-#define CLR_EXT_LOOPBACK (0 << 20)
-#define SET_EXT_LOOPBACK (1 << 20)
-#define SET_HALF_DUPLEX_MODE (0 << 21)
-#define SET_FULL_DUPLEX_MODE (1 << 21)
-#define DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (0 << 22)
-#define ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (1 << 22)
-#define SET_GMII_SPEED_TO_10_100 (0 << 23)
-#define SET_GMII_SPEED_TO_1000 (1 << 23)
-#define SET_MII_SPEED_TO_10 (0 << 24)
-#define SET_MII_SPEED_TO_100 (1 << 24)
+#define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13)
+#define DO_NOT_FORCE_LINK_FAIL (1 << 10)
+#define SERIAL_PORT_CONTROL_RESERVED (1 << 9)
+#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL (1 << 3)
+#define DISABLE_AUTO_NEG_FOR_DUPLEX (1 << 2)
+#define FORCE_LINK_PASS (1 << 1)
+#define SERIAL_PORT_ENABLE (1 << 0)
-#define PORT_SERIAL_CONTROL_DEFAULT_VALUE \
- DO_NOT_FORCE_LINK_PASS | \
- ENABLE_AUTO_NEG_FOR_DUPLX | \
- DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \
- ADV_SYMMETRIC_FLOW_CTRL | \
- FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
- FORCE_BP_MODE_NO_JAM | \
- (1 << 9) /* reserved */ | \
- DO_NOT_FORCE_LINK_FAIL | \
- RETRANSMIT_16_ATTEMPTS | \
- ENABLE_AUTO_NEG_SPEED_GMII | \
- DTE_ADV_0 | \
- DISABLE_AUTO_NEG_BYPASS | \
- AUTO_NEG_NO_CHANGE | \
- MAX_RX_PACKET_9700BYTE | \
- CLR_EXT_LOOPBACK | \
- SET_FULL_DUPLEX_MODE | \
- ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
-
-/* These macros describe Ethernet Serial Status reg (PSR) bits */
-#define PORT_STATUS_MODE_10_BIT (1 << 0)
-#define PORT_STATUS_LINK_UP (1 << 1)
-#define PORT_STATUS_FULL_DUPLEX (1 << 2)
-#define PORT_STATUS_FLOW_CONTROL (1 << 3)
-#define PORT_STATUS_GMII_1000 (1 << 4)
-#define PORT_STATUS_MII_100 (1 << 5)
-/* PSR bit 6 is undocumented */
-#define PORT_STATUS_TX_IN_PROGRESS (1 << 7)
-#define PORT_STATUS_AUTONEG_BYPASSED (1 << 8)
-#define PORT_STATUS_PARTITION (1 << 9)
-#define PORT_STATUS_TX_FIFO_EMPTY (1 << 10)
-/* PSR bits 11-31 are reserved */
-
-#define PORT_DEFAULT_TRANSMIT_QUEUE_SIZE 800
-#define PORT_DEFAULT_RECEIVE_QUEUE_SIZE 400
-
-#define DESC_SIZE 64
-
-#define ETH_RX_QUEUES_ENABLED (1 << 0) /* use only Q0 for receive */
-#define ETH_TX_QUEUES_ENABLED (1 << 0) /* use only Q0 for transmit */
-
-#define ETH_INT_CAUSE_RX_DONE (ETH_RX_QUEUES_ENABLED << 2)
-#define ETH_INT_CAUSE_RX_ERROR (ETH_RX_QUEUES_ENABLED << 9)
-#define ETH_INT_CAUSE_RX (ETH_INT_CAUSE_RX_DONE | ETH_INT_CAUSE_RX_ERROR)
-#define ETH_INT_CAUSE_EXT 0x00000002
-#define ETH_INT_UNMASK_ALL (ETH_INT_CAUSE_RX | ETH_INT_CAUSE_EXT)
-
-#define ETH_INT_CAUSE_TX_DONE (ETH_TX_QUEUES_ENABLED << 0)
-#define ETH_INT_CAUSE_TX_ERROR (ETH_TX_QUEUES_ENABLED << 8)
-#define ETH_INT_CAUSE_TX (ETH_INT_CAUSE_TX_DONE | ETH_INT_CAUSE_TX_ERROR)
-#define ETH_INT_CAUSE_PHY 0x00010000
-#define ETH_INT_CAUSE_STATE 0x00100000
-#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY | \
- ETH_INT_CAUSE_STATE)
-
-#define ETH_INT_MASK_ALL 0x00000000
-#define ETH_INT_MASK_ALL_EXT 0x00000000
-
-#define PHY_WAIT_ITERATIONS 1000 /* 1000 iterations * 10uS = 10mS max */
-#define PHY_WAIT_MICRO_SECONDS 10
-
-/* Buffer offset from buffer pointer */
-#define RX_BUF_OFFSET 0x2
-
-/* Gigabit Ethernet Unit Global Registers */
-
-/* MIB Counters register definitions */
-#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW 0x0
-#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH 0x4
-#define ETH_MIB_BAD_OCTETS_RECEIVED 0x8
-#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR 0xc
-#define ETH_MIB_GOOD_FRAMES_RECEIVED 0x10
-#define ETH_MIB_BAD_FRAMES_RECEIVED 0x14
-#define ETH_MIB_BROADCAST_FRAMES_RECEIVED 0x18
-#define ETH_MIB_MULTICAST_FRAMES_RECEIVED 0x1c
-#define ETH_MIB_FRAMES_64_OCTETS 0x20
-#define ETH_MIB_FRAMES_65_TO_127_OCTETS 0x24
-#define ETH_MIB_FRAMES_128_TO_255_OCTETS 0x28
-#define ETH_MIB_FRAMES_256_TO_511_OCTETS 0x2c
-#define ETH_MIB_FRAMES_512_TO_1023_OCTETS 0x30
-#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS 0x34
-#define ETH_MIB_GOOD_OCTETS_SENT_LOW 0x38
-#define ETH_MIB_GOOD_OCTETS_SENT_HIGH 0x3c
-#define ETH_MIB_GOOD_FRAMES_SENT 0x40
-#define ETH_MIB_EXCESSIVE_COLLISION 0x44
-#define ETH_MIB_MULTICAST_FRAMES_SENT 0x48
-#define ETH_MIB_BROADCAST_FRAMES_SENT 0x4c
-#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
-#define ETH_MIB_FC_SENT 0x54
-#define ETH_MIB_GOOD_FC_RECEIVED 0x58
-#define ETH_MIB_BAD_FC_RECEIVED 0x5c
-#define ETH_MIB_UNDERSIZE_RECEIVED 0x60
-#define ETH_MIB_FRAGMENTS_RECEIVED 0x64
-#define ETH_MIB_OVERSIZE_RECEIVED 0x68
-#define ETH_MIB_JABBER_RECEIVED 0x6c
-#define ETH_MIB_MAC_RECEIVE_ERROR 0x70
-#define ETH_MIB_BAD_CRC_EVENT 0x74
-#define ETH_MIB_COLLISION 0x78
-#define ETH_MIB_LATE_COLLISION 0x7c
-
-/* Port serial status reg (PSR) */
-#define ETH_INTERFACE_PCM 0x00000001
-#define ETH_LINK_IS_UP 0x00000002
-#define ETH_PORT_AT_FULL_DUPLEX 0x00000004
-#define ETH_RX_FLOW_CTRL_ENABLED 0x00000008
-#define ETH_GMII_SPEED_1000 0x00000010
-#define ETH_MII_SPEED_100 0x00000020
-#define ETH_TX_IN_PROGRESS 0x00000080
-#define ETH_BYPASS_ACTIVE 0x00000100
-#define ETH_PORT_AT_PARTITION_STATE 0x00000200
-#define ETH_PORT_TX_FIFO_EMPTY 0x00000400
-
-/* SMI reg */
-#define ETH_SMI_BUSY 0x10000000 /* 0 - Write, 1 - Read */
-#define ETH_SMI_READ_VALID 0x08000000 /* 0 - Write, 1 - Read */
-#define ETH_SMI_OPCODE_WRITE 0 /* Completion of Read */
-#define ETH_SMI_OPCODE_READ 0x04000000 /* Operation is in progress */
-
-/* Interrupt Cause Register Bit Definitions */
-
-/* SDMA command status fields macros */
-
-/* Tx & Rx descriptors status */
-#define ETH_ERROR_SUMMARY 0x00000001
-
-/* Tx & Rx descriptors command */
-#define ETH_BUFFER_OWNED_BY_DMA 0x80000000
-
-/* Tx descriptors status */
-#define ETH_LC_ERROR 0
-#define ETH_UR_ERROR 0x00000002
-#define ETH_RL_ERROR 0x00000004
-#define ETH_LLC_SNAP_FORMAT 0x00000200
-
-/* Rx descriptors status */
-#define ETH_OVERRUN_ERROR 0x00000002
-#define ETH_MAX_FRAME_LENGTH_ERROR 0x00000004
-#define ETH_RESOURCE_ERROR 0x00000006
-#define ETH_VLAN_TAGGED 0x00080000
-#define ETH_BPDU_FRAME 0x00100000
-#define ETH_UDP_FRAME_OVER_IP_V_4 0x00200000
-#define ETH_OTHER_FRAME_TYPE 0x00400000
-#define ETH_LAYER_2_IS_ETH_V_2 0x00800000
-#define ETH_FRAME_TYPE_IP_V_4 0x01000000
-#define ETH_FRAME_HEADER_OK 0x02000000
-#define ETH_RX_LAST_DESC 0x04000000
-#define ETH_RX_FIRST_DESC 0x08000000
-#define ETH_UNKNOWN_DESTINATION_ADDR 0x10000000
-#define ETH_RX_ENABLE_INTERRUPT 0x20000000
-#define ETH_LAYER_4_CHECKSUM_OK 0x40000000
-
-/* Rx descriptors byte count */
-#define ETH_FRAME_FRAGMENTED 0x00000004
-
-/* Tx descriptors command */
-#define ETH_LAYER_4_CHECKSUM_FIRST_DESC 0x00000400
-#define ETH_FRAME_SET_TO_VLAN 0x00008000
-#define ETH_UDP_FRAME 0x00010000
-#define ETH_GEN_TCP_UDP_CHECKSUM 0x00020000
-#define ETH_GEN_IP_V_4_CHECKSUM 0x00040000
-#define ETH_ZERO_PADDING 0x00080000
-#define ETH_TX_LAST_DESC 0x00100000
-#define ETH_TX_FIRST_DESC 0x00200000
-#define ETH_GEN_CRC 0x00400000
-#define ETH_TX_ENABLE_INTERRUPT 0x00800000
-#define ETH_AUTO_MODE 0x40000000
-
-#define ETH_TX_IHL_SHIFT 11
-
-/* typedefs */
-
-typedef enum _eth_func_ret_status {
- ETH_OK, /* Returned as expected. */
- ETH_ERROR, /* Fundamental error. */
- ETH_RETRY, /* Could not process request. Try later.*/
- ETH_END_OF_JOB, /* Ring has nothing to process. */
- ETH_QUEUE_FULL, /* Ring resource error. */
- ETH_QUEUE_LAST_RESOURCE /* Ring resources about to exhaust. */
-} ETH_FUNC_RET_STATUS;
-
-/* These are for big-endian machines. Little endian needs different
- * definitions.
+#define DEFAULT_RX_QUEUE_SIZE 400
+#define DEFAULT_TX_QUEUE_SIZE 800
+
+
+/*
+ * RX/TX descriptors.
*/
#if defined(__BIG_ENDIAN)
-struct eth_rx_desc {
+struct rx_desc {
u16 byte_cnt; /* Descriptor buffer byte count */
u16 buf_size; /* Buffer size */
u32 cmd_sts; /* Descriptor command status */
@@ -441,7 +180,7 @@ struct eth_rx_desc {
u32 buf_ptr; /* Descriptor buffer pointer */
};
-struct eth_tx_desc {
+struct tx_desc {
u16 byte_cnt; /* buffer byte count */
u16 l4i_chk; /* CPU provided TCP checksum */
u32 cmd_sts; /* Command/status field */
@@ -449,7 +188,7 @@ struct eth_tx_desc {
u32 buf_ptr; /* pointer to buffer for this descriptor*/
};
#elif defined(__LITTLE_ENDIAN)
-struct eth_rx_desc {
+struct rx_desc {
u32 cmd_sts; /* Descriptor command status */
u16 buf_size; /* Buffer size */
u16 byte_cnt; /* Descriptor buffer byte count */
@@ -457,7 +196,7 @@ struct eth_rx_desc {
u32 next_desc_ptr; /* Next descriptor pointer */
};
-struct eth_tx_desc {
+struct tx_desc {
u32 cmd_sts; /* Command/status field */
u16 l4i_chk; /* CPU provided TCP checksum */
u16 byte_cnt; /* buffer byte count */
@@ -468,18 +207,59 @@ struct eth_tx_desc {
#error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
#endif
-/* Unified struct for Rx and Tx operations. The user is not required to */
-/* be familier with neither Tx nor Rx descriptors. */
-struct pkt_info {
- unsigned short byte_cnt; /* Descriptor buffer byte count */
- unsigned short l4i_chk; /* Tx CPU provided TCP Checksum */
- unsigned int cmd_sts; /* Descriptor command status */
- dma_addr_t buf_ptr; /* Descriptor buffer pointer */
- struct sk_buff *return_info; /* User resource return information */
+/* RX & TX descriptor command */
+#define BUFFER_OWNED_BY_DMA 0x80000000
+
+/* RX & TX descriptor status */
+#define ERROR_SUMMARY 0x00000001
+
+/* RX descriptor status */
+#define LAYER_4_CHECKSUM_OK 0x40000000
+#define RX_ENABLE_INTERRUPT 0x20000000
+#define RX_FIRST_DESC 0x08000000
+#define RX_LAST_DESC 0x04000000
+
+/* TX descriptor command */
+#define TX_ENABLE_INTERRUPT 0x00800000
+#define GEN_CRC 0x00400000
+#define TX_FIRST_DESC 0x00200000
+#define TX_LAST_DESC 0x00100000
+#define ZERO_PADDING 0x00080000
+#define GEN_IP_V4_CHECKSUM 0x00040000
+#define GEN_TCP_UDP_CHECKSUM 0x00020000
+#define UDP_FRAME 0x00010000
+
+#define TX_IHL_SHIFT 11
+
+
+/* global *******************************************************************/
+struct mv643xx_eth_shared_private {
+ /*
+ * Ethernet controller base address.
+ */
+ void __iomem *base;
+
+ /*
+ * Protects access to SMI_REG, which is shared between ports.
+ */
+ spinlock_t phy_lock;
+
+ /*
+ * Per-port MBUS window access register value.
+ */
+ u32 win_protect;
+
+ /*
+ * Hardware-specific parameters.
+ */
+ unsigned int t_clk;
+ int extended_rx_coal_limit;
+ int tx_bw_control_moved;
};
-/* Ethernet port specific information */
-struct mv643xx_mib_counters {
+
+/* per-port *****************************************************************/
+struct mib_counters {
u64 good_octets_received;
u32 bad_octets_received;
u32 internal_mac_transmit_err;
@@ -512,461 +292,282 @@ struct mv643xx_mib_counters {
u32 late_collision;
};
-struct mv643xx_shared_private {
- void __iomem *eth_base;
-
- /* used to protect SMI_REG, which is shared across ports */
- spinlock_t phy_lock;
+struct rx_queue {
+ int index;
- u32 win_protect;
-
- unsigned int t_clk;
-};
-
-struct mv643xx_private {
- struct mv643xx_shared_private *shared;
- int port_num; /* User Ethernet port number */
-
- struct mv643xx_shared_private *shared_smi;
-
- u32 rx_sram_addr; /* Base address of rx sram area */
- u32 rx_sram_size; /* Size of rx sram area */
- u32 tx_sram_addr; /* Base address of tx sram area */
- u32 tx_sram_size; /* Size of tx sram area */
+ int rx_ring_size;
- int rx_resource_err; /* Rx ring resource error flag */
+ int rx_desc_count;
+ int rx_curr_desc;
+ int rx_used_desc;
- /* Tx/Rx rings managment indexes fields. For driver use */
+ struct rx_desc *rx_desc_area;
+ dma_addr_t rx_desc_dma;
+ int rx_desc_area_size;
+ struct sk_buff **rx_skb;
- /* Next available and first returning Rx resource */
- int rx_curr_desc_q, rx_used_desc_q;
+ struct timer_list rx_oom;
+};
- /* Next available and first returning Tx resource */
- int tx_curr_desc_q, tx_used_desc_q;
+struct tx_queue {
+ int index;
-#ifdef MV643XX_TX_FAST_REFILL
- u32 tx_clean_threshold;
-#endif
+ int tx_ring_size;
- struct eth_rx_desc *p_rx_desc_area;
- dma_addr_t rx_desc_dma;
- int rx_desc_area_size;
- struct sk_buff **rx_skb;
+ int tx_desc_count;
+ int tx_curr_desc;
+ int tx_used_desc;
- struct eth_tx_desc *p_tx_desc_area;
+ struct tx_desc *tx_desc_area;
dma_addr_t tx_desc_dma;
int tx_desc_area_size;
struct sk_buff **tx_skb;
+};
- struct work_struct tx_timeout_task;
+struct mv643xx_eth_private {
+ struct mv643xx_eth_shared_private *shared;
+ int port_num;
struct net_device *dev;
- struct napi_struct napi;
- struct net_device_stats stats;
- struct mv643xx_mib_counters mib_counters;
+
+ struct mv643xx_eth_shared_private *shared_smi;
+ int phy_addr;
+
spinlock_t lock;
- /* Size of Tx Ring per queue */
- int tx_ring_size;
- /* Number of tx descriptors in use */
- int tx_desc_count;
- /* Size of Rx Ring per queue */
- int rx_ring_size;
- /* Number of rx descriptors in use */
- int rx_desc_count;
+
+ struct mib_counters mib_counters;
+ struct work_struct tx_timeout_task;
+ struct mii_if_info mii;
/*
- * Used in case RX Ring is empty, which can be caused when
- * system does not have resources (skb's)
+ * RX state.
*/
- struct timer_list timeout;
-
- u32 rx_int_coal;
- u32 tx_int_coal;
- struct mii_if_info mii;
-};
+ int default_rx_ring_size;
+ unsigned long rx_desc_sram_addr;
+ int rx_desc_sram_size;
+ u8 rxq_mask;
+ int rxq_primary;
+ struct napi_struct napi;
+ struct rx_queue rxq[8];
-/* Static function declarations */
-static void eth_port_init(struct mv643xx_private *mp);
-static void eth_port_reset(struct mv643xx_private *mp);
-static void eth_port_start(struct net_device *dev);
-
-static void ethernet_phy_reset(struct mv643xx_private *mp);
-
-static void eth_port_write_smi_reg(struct mv643xx_private *mp,
- unsigned int phy_reg, unsigned int value);
-
-static void eth_port_read_smi_reg(struct mv643xx_private *mp,
- unsigned int phy_reg, unsigned int *value);
-
-static void eth_clear_mib_counters(struct mv643xx_private *mp);
-
-static ETH_FUNC_RET_STATUS eth_port_receive(struct mv643xx_private *mp,
- struct pkt_info *p_pkt_info);
-static ETH_FUNC_RET_STATUS eth_rx_return_buff(struct mv643xx_private *mp,
- struct pkt_info *p_pkt_info);
-
-static void eth_port_uc_addr_get(struct mv643xx_private *mp,
- unsigned char *p_addr);
-static void eth_port_uc_addr_set(struct mv643xx_private *mp,
- unsigned char *p_addr);
-static void eth_port_set_multicast_list(struct net_device *);
-static void mv643xx_eth_port_enable_tx(struct mv643xx_private *mp,
- unsigned int queues);
-static void mv643xx_eth_port_enable_rx(struct mv643xx_private *mp,
- unsigned int queues);
-static unsigned int mv643xx_eth_port_disable_tx(struct mv643xx_private *mp);
-static unsigned int mv643xx_eth_port_disable_rx(struct mv643xx_private *mp);
-static int mv643xx_eth_open(struct net_device *);
-static int mv643xx_eth_stop(struct net_device *);
-static void eth_port_init_mac_tables(struct mv643xx_private *mp);
-#ifdef MV643XX_NAPI
-static int mv643xx_poll(struct napi_struct *napi, int budget);
+ /*
+ * TX state.
+ */
+ int default_tx_ring_size;
+ unsigned long tx_desc_sram_addr;
+ int tx_desc_sram_size;
+ u8 txq_mask;
+ int txq_primary;
+ struct tx_queue txq[8];
+#ifdef MV643XX_ETH_TX_FAST_REFILL
+ int tx_clean_threshold;
#endif
-static int ethernet_phy_get(struct mv643xx_private *mp);
-static void ethernet_phy_set(struct mv643xx_private *mp, int phy_addr);
-static int ethernet_phy_detect(struct mv643xx_private *mp);
-static int mv643xx_mdio_read(struct net_device *dev, int phy_id, int location);
-static void mv643xx_mdio_write(struct net_device *dev, int phy_id, int location, int val);
-static int mv643xx_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-static const struct ethtool_ops mv643xx_ethtool_ops;
+};
-static char mv643xx_driver_name[] = "mv643xx_eth";
-static char mv643xx_driver_version[] = "1.0";
-static inline u32 rdl(struct mv643xx_private *mp, int offset)
+/* port register accessors **************************************************/
+static inline u32 rdl(struct mv643xx_eth_private *mp, int offset)
{
- return readl(mp->shared->eth_base + offset);
+ return readl(mp->shared->base + offset);
}
-static inline void wrl(struct mv643xx_private *mp, int offset, u32 data)
+static inline void wrl(struct mv643xx_eth_private *mp, int offset, u32 data)
{
- writel(data, mp->shared->eth_base + offset);
+ writel(data, mp->shared->base + offset);
}
-/*
- * Changes MTU (maximum transfer unit) of the gigabit ethenret port
- *
- * Input : pointer to ethernet interface network device structure
- * new mtu size
- * Output : 0 upon success, -EINVAL upon failure
- */
-static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu > 9500) || (new_mtu < 64))
- return -EINVAL;
- dev->mtu = new_mtu;
- if (!netif_running(dev))
- return 0;
-
- /*
- * Stop and then re-open the interface. This will allocate RX
- * skbs of the new MTU.
- * There is a possible danger that the open will not succeed,
- * due to memory being full, which might fail the open function.
- */
- mv643xx_eth_stop(dev);
- if (mv643xx_eth_open(dev)) {
- printk(KERN_ERR "%s: Fatal error on opening device\n",
- dev->name);
- }
-
- return 0;
-}
-
-/*
- * mv643xx_eth_rx_refill_descs
- *
- * Fills / refills RX queue on a certain gigabit ethernet port
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- */
-static void mv643xx_eth_rx_refill_descs(struct net_device *dev)
+/* rxq/txq helper functions *************************************************/
+static struct mv643xx_eth_private *rxq_to_mp(struct rx_queue *rxq)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- struct pkt_info pkt_info;
- struct sk_buff *skb;
- int unaligned;
-
- while (mp->rx_desc_count < mp->rx_ring_size) {
- skb = dev_alloc_skb(ETH_RX_SKB_SIZE + dma_get_cache_alignment());
- if (!skb)
- break;
- mp->rx_desc_count++;
- unaligned = (u32)skb->data & (dma_get_cache_alignment() - 1);
- if (unaligned)
- skb_reserve(skb, dma_get_cache_alignment() - unaligned);
- pkt_info.cmd_sts = ETH_RX_ENABLE_INTERRUPT;
- pkt_info.byte_cnt = ETH_RX_SKB_SIZE;
- pkt_info.buf_ptr = dma_map_single(NULL, skb->data,
- ETH_RX_SKB_SIZE, DMA_FROM_DEVICE);
- pkt_info.return_info = skb;
- if (eth_rx_return_buff(mp, &pkt_info) != ETH_OK) {
- printk(KERN_ERR
- "%s: Error allocating RX Ring\n", dev->name);
- break;
- }
- skb_reserve(skb, ETH_HW_IP_ALIGN);
- }
- /*
- * If RX ring is empty of SKB, set a timer to try allocating
- * again at a later time.
- */
- if (mp->rx_desc_count == 0) {
- printk(KERN_INFO "%s: Rx ring is empty\n", dev->name);
- mp->timeout.expires = jiffies + (HZ / 10); /* 100 mSec */
- add_timer(&mp->timeout);
- }
+ return container_of(rxq, struct mv643xx_eth_private, rxq[rxq->index]);
}
-/*
- * mv643xx_eth_rx_refill_descs_timer_wrapper
- *
- * Timer routine to wake up RX queue filling task. This function is
- * used only in case the RX queue is empty, and all alloc_skb has
- * failed (due to out of memory event).
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- */
-static inline void mv643xx_eth_rx_refill_descs_timer_wrapper(unsigned long data)
+static struct mv643xx_eth_private *txq_to_mp(struct tx_queue *txq)
{
- mv643xx_eth_rx_refill_descs((struct net_device *)data);
+ return container_of(txq, struct mv643xx_eth_private, txq[txq->index]);
}
-/*
- * mv643xx_eth_update_mac_address
- *
- * Update the MAC address of the port in the address table
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- */
-static void mv643xx_eth_update_mac_address(struct net_device *dev)
+static void rxq_enable(struct rx_queue *rxq)
{
- struct mv643xx_private *mp = netdev_priv(dev);
-
- eth_port_init_mac_tables(mp);
- eth_port_uc_addr_set(mp, dev->dev_addr);
+ struct mv643xx_eth_private *mp = rxq_to_mp(rxq);
+ wrl(mp, RXQ_COMMAND(mp->port_num), 1 << rxq->index);
}
-/*
- * mv643xx_eth_set_rx_mode
- *
- * Change from promiscuos to regular rx mode
- *
- * Input : pointer to ethernet interface network device structure
- * Output : N/A
- */
-static void mv643xx_eth_set_rx_mode(struct net_device *dev)
+static void rxq_disable(struct rx_queue *rxq)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- u32 config_reg;
+ struct mv643xx_eth_private *mp = rxq_to_mp(rxq);
+ u8 mask = 1 << rxq->index;
- config_reg = rdl(mp, PORT_CONFIG_REG(mp->port_num));
- if (dev->flags & IFF_PROMISC)
- config_reg |= (u32) UNICAST_PROMISCUOUS_MODE;
- else
- config_reg &= ~(u32) UNICAST_PROMISCUOUS_MODE;
- wrl(mp, PORT_CONFIG_REG(mp->port_num), config_reg);
-
- eth_port_set_multicast_list(dev);
+ wrl(mp, RXQ_COMMAND(mp->port_num), mask << 8);
+ while (rdl(mp, RXQ_COMMAND(mp->port_num)) & mask)
+ udelay(10);
}
-/*
- * mv643xx_eth_set_mac_address
- *
- * Change the interface's mac address.
- * No special hardware thing should be done because interface is always
- * put in promiscuous mode.
- *
- * Input : pointer to ethernet interface network device structure and
- * a pointer to the designated entry to be added to the cache.
- * Output : zero upon success, negative upon failure
- */
-static int mv643xx_eth_set_mac_address(struct net_device *dev, void *addr)
+static void txq_enable(struct tx_queue *txq)
{
- int i;
-
- for (i = 0; i < 6; i++)
- /* +2 is for the offset of the HW addr type */
- dev->dev_addr[i] = ((unsigned char *)addr)[i + 2];
- mv643xx_eth_update_mac_address(dev);
- return 0;
+ struct mv643xx_eth_private *mp = txq_to_mp(txq);
+ wrl(mp, TXQ_COMMAND(mp->port_num), 1 << txq->index);
}
-/*
- * mv643xx_eth_tx_timeout
- *
- * Called upon a timeout on transmitting a packet
- *
- * Input : pointer to ethernet interface network device structure.
- * Output : N/A
- */
-static void mv643xx_eth_tx_timeout(struct net_device *dev)
+static void txq_disable(struct tx_queue *txq)
{
- struct mv643xx_private *mp = netdev_priv(dev);
-
- printk(KERN_INFO "%s: TX timeout ", dev->name);
+ struct mv643xx_eth_private *mp = txq_to_mp(txq);
+ u8 mask = 1 << txq->index;
- /* Do the reset outside of interrupt context */
- schedule_work(&mp->tx_timeout_task);
+ wrl(mp, TXQ_COMMAND(mp->port_num), mask << 8);
+ while (rdl(mp, TXQ_COMMAND(mp->port_num)) & mask)
+ udelay(10);
}
-/*
- * mv643xx_eth_tx_timeout_task
- *
- * Actual routine to reset the adapter when a timeout on Tx has occurred
- */
-static void mv643xx_eth_tx_timeout_task(struct work_struct *ugly)
+static void __txq_maybe_wake(struct tx_queue *txq)
{
- struct mv643xx_private *mp = container_of(ugly, struct mv643xx_private,
- tx_timeout_task);
- struct net_device *dev = mp->dev;
+ struct mv643xx_eth_private *mp = txq_to_mp(txq);
- if (!netif_running(dev))
- return;
+ /*
+ * netif_{stop,wake}_queue() flow control only applies to
+ * the primary queue.
+ */
+ BUG_ON(txq->index != mp->txq_primary);
- netif_stop_queue(dev);
+ if (txq->tx_ring_size - txq->tx_desc_count >= MAX_DESCS_PER_SKB)
+ netif_wake_queue(mp->dev);
+}
- eth_port_reset(mp);
- eth_port_start(dev);
- if (mp->tx_ring_size - mp->tx_desc_count >= MAX_DESCS_PER_SKB)
- netif_wake_queue(dev);
-}
+/* rx ***********************************************************************/
+static void txq_reclaim(struct tx_queue *txq, int force);
-/**
- * mv643xx_eth_free_tx_descs - Free the tx desc data for completed descriptors
- *
- * If force is non-zero, frees uncompleted descriptors as well
- */
-static int mv643xx_eth_free_tx_descs(struct net_device *dev, int force)
+static void rxq_refill(struct rx_queue *rxq)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- struct eth_tx_desc *desc;
- u32 cmd_sts;
- struct sk_buff *skb;
+ struct mv643xx_eth_private *mp = rxq_to_mp(rxq);
unsigned long flags;
- int tx_index;
- dma_addr_t addr;
- int count;
- int released = 0;
- while (mp->tx_desc_count > 0) {
- spin_lock_irqsave(&mp->lock, flags);
-
- /* tx_desc_count might have changed before acquiring the lock */
- if (mp->tx_desc_count <= 0) {
- spin_unlock_irqrestore(&mp->lock, flags);
- return released;
- }
-
- tx_index = mp->tx_used_desc_q;
- desc = &mp->p_tx_desc_area[tx_index];
- cmd_sts = desc->cmd_sts;
+ spin_lock_irqsave(&mp->lock, flags);
- if (!force && (cmd_sts & ETH_BUFFER_OWNED_BY_DMA)) {
- spin_unlock_irqrestore(&mp->lock, flags);
- return released;
- }
+ while (rxq->rx_desc_count < rxq->rx_ring_size) {
+ int skb_size;
+ struct sk_buff *skb;
+ int unaligned;
+ int rx;
- mp->tx_used_desc_q = (tx_index + 1) % mp->tx_ring_size;
- mp->tx_desc_count--;
+ /*
+ * Reserve 2+14 bytes for an ethernet header (the
+ * hardware automatically prepends 2 bytes of dummy
+ * data to each received packet), 4 bytes for a VLAN
+ * header, and 4 bytes for the trailing FCS -- 24
+ * bytes total.
+ */
+ skb_size = mp->dev->mtu + 24;
- addr = desc->buf_ptr;
- count = desc->byte_cnt;
- skb = mp->tx_skb[tx_index];
- if (skb)
- mp->tx_skb[tx_index] = NULL;
+ skb = dev_alloc_skb(skb_size + dma_get_cache_alignment() - 1);
+ if (skb == NULL)
+ break;
- if (cmd_sts & ETH_ERROR_SUMMARY) {
- printk("%s: Error in TX\n", dev->name);
- dev->stats.tx_errors++;
- }
+ unaligned = (u32)skb->data & (dma_get_cache_alignment() - 1);
+ if (unaligned)
+ skb_reserve(skb, dma_get_cache_alignment() - unaligned);
- spin_unlock_irqrestore(&mp->lock, flags);
+ rxq->rx_desc_count++;
+ rx = rxq->rx_used_desc;
+ rxq->rx_used_desc = (rx + 1) % rxq->rx_ring_size;
- if (cmd_sts & ETH_TX_FIRST_DESC)
- dma_unmap_single(NULL, addr, count, DMA_TO_DEVICE);
- else
- dma_unmap_page(NULL, addr, count, DMA_TO_DEVICE);
+ rxq->rx_desc_area[rx].buf_ptr = dma_map_single(NULL, skb->data,
+ skb_size, DMA_FROM_DEVICE);
+ rxq->rx_desc_area[rx].buf_size = skb_size;
+ rxq->rx_skb[rx] = skb;
+ wmb();
+ rxq->rx_desc_area[rx].cmd_sts = BUFFER_OWNED_BY_DMA |
+ RX_ENABLE_INTERRUPT;
+ wmb();
- if (skb)
- dev_kfree_skb_irq(skb);
+ /*
+ * The hardware automatically prepends 2 bytes of
+ * dummy data to each received packet, so that the
+ * IP header ends up 16-byte aligned.
+ */
+ skb_reserve(skb, 2);
+ }
- released = 1;
+ if (rxq->rx_desc_count != rxq->rx_ring_size) {
+ rxq->rx_oom.expires = jiffies + (HZ / 10);
+ add_timer(&rxq->rx_oom);
}
- return released;
+ spin_unlock_irqrestore(&mp->lock, flags);
}
-static void mv643xx_eth_free_completed_tx_descs(struct net_device *dev)
+static inline void rxq_refill_timer_wrapper(unsigned long data)
{
- struct mv643xx_private *mp = netdev_priv(dev);
-
- if (mv643xx_eth_free_tx_descs(dev, 0) &&
- mp->tx_ring_size - mp->tx_desc_count >= MAX_DESCS_PER_SKB)
- netif_wake_queue(dev);
+ rxq_refill((struct rx_queue *)data);
}
-static void mv643xx_eth_free_all_tx_descs(struct net_device *dev)
+static int rxq_process(struct rx_queue *rxq, int budget)
{
- mv643xx_eth_free_tx_descs(dev, 1);
-}
+ struct mv643xx_eth_private *mp = rxq_to_mp(rxq);
+ struct net_device_stats *stats = &mp->dev->stats;
+ int rx;
-/*
- * mv643xx_eth_receive
- *
- * This function is forward packets that are received from the port's
- * queues toward kernel core or FastRoute them to another interface.
- *
- * Input : dev - a pointer to the required interface
- * max - maximum number to receive (0 means unlimted)
- *
- * Output : number of served packets
- */
-static int mv643xx_eth_receive_queue(struct net_device *dev, int budget)
-{
- struct mv643xx_private *mp = netdev_priv(dev);
- struct net_device_stats *stats = &dev->stats;
- unsigned int received_packets = 0;
- struct sk_buff *skb;
- struct pkt_info pkt_info;
+ rx = 0;
+ while (rx < budget) {
+ struct rx_desc *rx_desc;
+ unsigned int cmd_sts;
+ struct sk_buff *skb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mp->lock, flags);
+
+ rx_desc = &rxq->rx_desc_area[rxq->rx_curr_desc];
+
+ cmd_sts = rx_desc->cmd_sts;
+ if (cmd_sts & BUFFER_OWNED_BY_DMA) {
+ spin_unlock_irqrestore(&mp->lock, flags);
+ break;
+ }
+ rmb();
+
+ skb = rxq->rx_skb[rxq->rx_curr_desc];
+ rxq->rx_skb[rxq->rx_curr_desc] = NULL;
- while (budget-- > 0 && eth_port_receive(mp, &pkt_info) == ETH_OK) {
- dma_unmap_single(NULL, pkt_info.buf_ptr, ETH_RX_SKB_SIZE,
- DMA_FROM_DEVICE);
- mp->rx_desc_count--;
- received_packets++;
+ rxq->rx_curr_desc = (rxq->rx_curr_desc + 1) % rxq->rx_ring_size;
+
+ spin_unlock_irqrestore(&mp->lock, flags);
+
+ dma_unmap_single(NULL, rx_desc->buf_ptr + 2,
+ mp->dev->mtu + 24, DMA_FROM_DEVICE);
+ rxq->rx_desc_count--;
+ rx++;
/*
* Update statistics.
- * Note byte count includes 4 byte CRC count
+ *
+ * Note that the descriptor byte count includes 2 dummy
+ * bytes automatically inserted by the hardware at the
+ * start of the packet (which we don't count), and a 4
+ * byte CRC at the end of the packet (which we do count).
*/
stats->rx_packets++;
- stats->rx_bytes += pkt_info.byte_cnt;
- skb = pkt_info.return_info;
+ stats->rx_bytes += rx_desc->byte_cnt - 2;
+
/*
- * In case received a packet without first / last bits on OR
- * the error summary bit is on, the packets needs to be dropeed.
+ * In case we received a packet without first / last bits
+ * on, or the error summary bit is set, the packet needs
+ * to be dropped.
*/
- if (((pkt_info.cmd_sts
- & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
- (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
- || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
+ if (((cmd_sts & (RX_FIRST_DESC | RX_LAST_DESC)) !=
+ (RX_FIRST_DESC | RX_LAST_DESC))
+ || (cmd_sts & ERROR_SUMMARY)) {
stats->rx_dropped++;
- if ((pkt_info.cmd_sts & (ETH_RX_FIRST_DESC |
- ETH_RX_LAST_DESC)) !=
- (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) {
+
+ if ((cmd_sts & (RX_FIRST_DESC | RX_LAST_DESC)) !=
+ (RX_FIRST_DESC | RX_LAST_DESC)) {
if (net_ratelimit())
- printk(KERN_ERR
- "%s: Received packet spread "
- "on multiple descriptors\n",
- dev->name);
+ dev_printk(KERN_ERR, &mp->dev->dev,
+ "received packet spanning "
+ "multiple descriptors\n");
}
- if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)
+
+ if (cmd_sts & ERROR_SUMMARY)
stats->rx_errors++;
dev_kfree_skb_irq(skb);
@@ -975,2391 +576,2003 @@ static int mv643xx_eth_receive_queue(struct net_device *dev, int budget)
* The -4 is for the CRC in the trailer of the
* received packet
*/
- skb_put(skb, pkt_info.byte_cnt - 4);
+ skb_put(skb, rx_desc->byte_cnt - 2 - 4);
- if (pkt_info.cmd_sts & ETH_LAYER_4_CHECKSUM_OK) {
+ if (cmd_sts & LAYER_4_CHECKSUM_OK) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->csum = htons(
- (pkt_info.cmd_sts & 0x0007fff8) >> 3);
+ (cmd_sts & 0x0007fff8) >> 3);
}
- skb->protocol = eth_type_trans(skb, dev);
-#ifdef MV643XX_NAPI
+ skb->protocol = eth_type_trans(skb, mp->dev);
+#ifdef MV643XX_ETH_NAPI
netif_receive_skb(skb);
#else
netif_rx(skb);
#endif
}
- dev->last_rx = jiffies;
+
+ mp->dev->last_rx = jiffies;
}
- mv643xx_eth_rx_refill_descs(dev); /* Fill RX ring with skb's */
- return received_packets;
+ rxq_refill(rxq);
+
+ return rx;
}
-/* Set the mv643xx port configuration register for the speed/duplex mode. */
-static void mv643xx_eth_update_pscr(struct net_device *dev,
- struct ethtool_cmd *ecmd)
+#ifdef MV643XX_ETH_NAPI
+static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- int port_num = mp->port_num;
- u32 o_pscr, n_pscr;
- unsigned int queues;
+ struct mv643xx_eth_private *mp;
+ int rx;
+ int i;
- o_pscr = rdl(mp, PORT_SERIAL_CONTROL_REG(port_num));
- n_pscr = o_pscr;
+ mp = container_of(napi, struct mv643xx_eth_private, napi);
- /* clear speed, duplex and rx buffer size fields */
- n_pscr &= ~(SET_MII_SPEED_TO_100 |
- SET_GMII_SPEED_TO_1000 |
- SET_FULL_DUPLEX_MODE |
- MAX_RX_PACKET_MASK);
-
- if (ecmd->duplex == DUPLEX_FULL)
- n_pscr |= SET_FULL_DUPLEX_MODE;
-
- if (ecmd->speed == SPEED_1000)
- n_pscr |= SET_GMII_SPEED_TO_1000 |
- MAX_RX_PACKET_9700BYTE;
- else {
- if (ecmd->speed == SPEED_100)
- n_pscr |= SET_MII_SPEED_TO_100;
- n_pscr |= MAX_RX_PACKET_1522BYTE;
+#ifdef MV643XX_ETH_TX_FAST_REFILL
+ if (++mp->tx_clean_threshold > 5) {
+ mp->tx_clean_threshold = 0;
+ for (i = 0; i < 8; i++)
+ if (mp->txq_mask & (1 << i))
+ txq_reclaim(mp->txq + i, 0);
}
+#endif
- if (n_pscr != o_pscr) {
- if ((o_pscr & SERIAL_PORT_ENABLE) == 0)
- wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
- else {
- queues = mv643xx_eth_port_disable_tx(mp);
-
- o_pscr &= ~SERIAL_PORT_ENABLE;
- wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), o_pscr);
- wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
- wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
- if (queues)
- mv643xx_eth_port_enable_tx(mp, queues);
- }
+ rx = 0;
+ for (i = 7; rx < budget && i >= 0; i--)
+ if (mp->rxq_mask & (1 << i))
+ rx += rxq_process(mp->rxq + i, budget - rx);
+
+ if (rx < budget) {
+ netif_rx_complete(mp->dev, napi);
+ wrl(mp, INT_CAUSE(mp->port_num), 0);
+ wrl(mp, INT_CAUSE_EXT(mp->port_num), 0);
+ wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_EXT);
}
+
+ return rx;
}
+#endif
-/*
- * mv643xx_eth_int_handler
- *
- * Main interrupt handler for the gigbit ethernet ports
- *
- * Input : irq - irq number (not used)
- * dev_id - a pointer to the required interface's data structure
- * regs - not used
- * Output : N/A
- */
-static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id)
+/* tx ***********************************************************************/
+static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb)
{
- struct net_device *dev = (struct net_device *)dev_id;
- struct mv643xx_private *mp = netdev_priv(dev);
- u32 eth_int_cause, eth_int_cause_ext = 0;
- unsigned int port_num = mp->port_num;
-
- /* Read interrupt cause registers */
- eth_int_cause = rdl(mp, INTERRUPT_CAUSE_REG(port_num)) &
- ETH_INT_UNMASK_ALL;
- if (eth_int_cause & ETH_INT_CAUSE_EXT) {
- eth_int_cause_ext = rdl(mp,
- INTERRUPT_CAUSE_EXTEND_REG(port_num)) &
- ETH_INT_UNMASK_ALL_EXT;
- wrl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num),
- ~eth_int_cause_ext);
- }
-
- /* PHY status changed */
- if (eth_int_cause_ext & (ETH_INT_CAUSE_PHY | ETH_INT_CAUSE_STATE)) {
- struct ethtool_cmd cmd;
+ int frag;
- if (mii_link_ok(&mp->mii)) {
- mii_ethtool_gset(&mp->mii, &cmd);
- mv643xx_eth_update_pscr(dev, &cmd);
- mv643xx_eth_port_enable_tx(mp, ETH_TX_QUEUES_ENABLED);
- if (!netif_carrier_ok(dev)) {
- netif_carrier_on(dev);
- if (mp->tx_ring_size - mp->tx_desc_count >=
- MAX_DESCS_PER_SKB)
- netif_wake_queue(dev);
- }
- } else if (netif_carrier_ok(dev)) {
- netif_stop_queue(dev);
- netif_carrier_off(dev);
- }
+ for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
+ skb_frag_t *fragp = &skb_shinfo(skb)->frags[frag];
+ if (fragp->size <= 8 && fragp->page_offset & 7)
+ return 1;
}
-#ifdef MV643XX_NAPI
- if (eth_int_cause & ETH_INT_CAUSE_RX) {
- /* schedule the NAPI poll routine to maintain port */
- wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
+ return 0;
+}
- /* wait for previous write to complete */
- rdl(mp, INTERRUPT_MASK_REG(port_num));
+static int txq_alloc_desc_index(struct tx_queue *txq)
+{
+ int tx_desc_curr;
- netif_rx_schedule(dev, &mp->napi);
- }
-#else
- if (eth_int_cause & ETH_INT_CAUSE_RX)
- mv643xx_eth_receive_queue(dev, INT_MAX);
-#endif
- if (eth_int_cause_ext & ETH_INT_CAUSE_TX)
- mv643xx_eth_free_completed_tx_descs(dev);
+ BUG_ON(txq->tx_desc_count >= txq->tx_ring_size);
- /*
- * If no real interrupt occured, exit.
- * This can happen when using gigE interrupt coalescing mechanism.
- */
- if ((eth_int_cause == 0x0) && (eth_int_cause_ext == 0x0))
- return IRQ_NONE;
+ tx_desc_curr = txq->tx_curr_desc;
+ txq->tx_curr_desc = (tx_desc_curr + 1) % txq->tx_ring_size;
- return IRQ_HANDLED;
-}
+ BUG_ON(txq->tx_curr_desc == txq->tx_used_desc);
-#ifdef MV643XX_COAL
+ return tx_desc_curr;
+}
-/*
- * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
- *
- * DESCRIPTION:
- * This routine sets the RX coalescing interrupt mechanism parameter.
- * This parameter is a timeout counter, that counts in 64 t_clk
- * chunks ; that when timeout event occurs a maskable interrupt
- * occurs.
- * The parameter is calculated using the tClk of the MV-643xx chip
- * , and the required delay of the interrupt in usec.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet port
- * unsigned int delay Delay in usec
- *
- * OUTPUT:
- * Interrupt coalescing mechanism value is set in MV-643xx chip.
- *
- * RETURN:
- * The interrupt coalescing value set in the gigE port.
- *
- */
-static unsigned int eth_port_set_rx_coal(struct mv643xx_private *mp,
- unsigned int delay)
+static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb)
{
- unsigned int port_num = mp->port_num;
- unsigned int coal = ((mp->shared->t_clk / 1000000) * delay) / 64;
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+ int frag;
- /* Set RX Coalescing mechanism */
- wrl(mp, SDMA_CONFIG_REG(port_num),
- ((coal & 0x3fff) << 8) |
- (rdl(mp, SDMA_CONFIG_REG(port_num))
- & 0xffc000ff));
+ for (frag = 0; frag < nr_frags; frag++) {
+ skb_frag_t *this_frag;
+ int tx_index;
+ struct tx_desc *desc;
- return coal;
-}
-#endif
+ this_frag = &skb_shinfo(skb)->frags[frag];
+ tx_index = txq_alloc_desc_index(txq);
+ desc = &txq->tx_desc_area[tx_index];
-/*
- * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
- *
- * DESCRIPTION:
- * This routine sets the TX coalescing interrupt mechanism parameter.
- * This parameter is a timeout counter, that counts in 64 t_clk
- * chunks ; that when timeout event occurs a maskable interrupt
- * occurs.
- * The parameter is calculated using the t_cLK frequency of the
- * MV-643xx chip and the required delay in the interrupt in uSec
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet port
- * unsigned int delay Delay in uSeconds
- *
- * OUTPUT:
- * Interrupt coalescing mechanism value is set in MV-643xx chip.
- *
- * RETURN:
- * The interrupt coalescing value set in the gigE port.
- *
- */
-static unsigned int eth_port_set_tx_coal(struct mv643xx_private *mp,
- unsigned int delay)
-{
- unsigned int coal = ((mp->shared->t_clk / 1000000) * delay) / 64;
+ /*
+ * The last fragment will generate an interrupt
+ * which will free the skb on TX completion.
+ */
+ if (frag == nr_frags - 1) {
+ desc->cmd_sts = BUFFER_OWNED_BY_DMA |
+ ZERO_PADDING | TX_LAST_DESC |
+ TX_ENABLE_INTERRUPT;
+ txq->tx_skb[tx_index] = skb;
+ } else {
+ desc->cmd_sts = BUFFER_OWNED_BY_DMA;
+ txq->tx_skb[tx_index] = NULL;
+ }
- /* Set TX Coalescing mechanism */
- wrl(mp, TX_FIFO_URGENT_THRESHOLD_REG(mp->port_num), coal << 4);
+ desc->l4i_chk = 0;
+ desc->byte_cnt = this_frag->size;
+ desc->buf_ptr = dma_map_page(NULL, this_frag->page,
+ this_frag->page_offset,
+ this_frag->size,
+ DMA_TO_DEVICE);
+ }
+}
- return coal;
+static inline __be16 sum16_as_be(__sum16 sum)
+{
+ return (__force __be16)sum;
}
-/*
- * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
- *
- * DESCRIPTION:
- * This function prepares a Rx chained list of descriptors and packet
- * buffers in a form of a ring. The routine must be called after port
- * initialization routine and before port start routine.
- * The Ethernet SDMA engine uses CPU bus addresses to access the various
- * devices in the system (i.e. DRAM). This function uses the ethernet
- * struct 'virtual to physical' routine (set by the user) to set the ring
- * with physical addresses.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port Control srtuct.
- *
- * OUTPUT:
- * The routine updates the Ethernet port control struct with information
- * regarding the Rx descriptors and buffers.
- *
- * RETURN:
- * None.
- */
-static void ether_init_rx_desc_ring(struct mv643xx_private *mp)
+static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
{
- volatile struct eth_rx_desc *p_rx_desc;
- int rx_desc_num = mp->rx_ring_size;
- int i;
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+ int tx_index;
+ struct tx_desc *desc;
+ u32 cmd_sts;
+ int length;
- /* initialize the next_desc_ptr links in the Rx descriptors ring */
- p_rx_desc = (struct eth_rx_desc *)mp->p_rx_desc_area;
- for (i = 0; i < rx_desc_num; i++) {
- p_rx_desc[i].next_desc_ptr = mp->rx_desc_dma +
- ((i + 1) % rx_desc_num) * sizeof(struct eth_rx_desc);
+ cmd_sts = TX_FIRST_DESC | GEN_CRC | BUFFER_OWNED_BY_DMA;
+
+ tx_index = txq_alloc_desc_index(txq);
+ desc = &txq->tx_desc_area[tx_index];
+
+ if (nr_frags) {
+ txq_submit_frag_skb(txq, skb);
+
+ length = skb_headlen(skb);
+ txq->tx_skb[tx_index] = NULL;
+ } else {
+ cmd_sts |= ZERO_PADDING | TX_LAST_DESC | TX_ENABLE_INTERRUPT;
+ length = skb->len;
+ txq->tx_skb[tx_index] = skb;
}
- /* Save Rx desc pointer to driver struct. */
- mp->rx_curr_desc_q = 0;
- mp->rx_used_desc_q = 0;
+ desc->byte_cnt = length;
+ desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
- mp->rx_desc_area_size = rx_desc_num * sizeof(struct eth_rx_desc);
-}
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ BUG_ON(skb->protocol != htons(ETH_P_IP));
-/*
- * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
- *
- * DESCRIPTION:
- * This function prepares a Tx chained list of descriptors and packet
- * buffers in a form of a ring. The routine must be called after port
- * initialization routine and before port start routine.
- * The Ethernet SDMA engine uses CPU bus addresses to access the various
- * devices in the system (i.e. DRAM). This function uses the ethernet
- * struct 'virtual to physical' routine (set by the user) to set the ring
- * with physical addresses.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port Control srtuct.
- *
- * OUTPUT:
- * The routine updates the Ethernet port control struct with information
- * regarding the Tx descriptors and buffers.
- *
- * RETURN:
- * None.
- */
-static void ether_init_tx_desc_ring(struct mv643xx_private *mp)
-{
- int tx_desc_num = mp->tx_ring_size;
- struct eth_tx_desc *p_tx_desc;
- int i;
+ cmd_sts |= GEN_TCP_UDP_CHECKSUM |
+ GEN_IP_V4_CHECKSUM |
+ ip_hdr(skb)->ihl << TX_IHL_SHIFT;
- /* Initialize the next_desc_ptr links in the Tx descriptors ring */
- p_tx_desc = (struct eth_tx_desc *)mp->p_tx_desc_area;
- for (i = 0; i < tx_desc_num; i++) {
- p_tx_desc[i].next_desc_ptr = mp->tx_desc_dma +
- ((i + 1) % tx_desc_num) * sizeof(struct eth_tx_desc);
+ switch (ip_hdr(skb)->protocol) {
+ case IPPROTO_UDP:
+ cmd_sts |= UDP_FRAME;
+ desc->l4i_chk = ntohs(sum16_as_be(udp_hdr(skb)->check));
+ break;
+ case IPPROTO_TCP:
+ desc->l4i_chk = ntohs(sum16_as_be(tcp_hdr(skb)->check));
+ break;
+ default:
+ BUG();
+ }
+ } else {
+ /* Errata BTS #50, IHL must be 5 if no HW checksum */
+ cmd_sts |= 5 << TX_IHL_SHIFT;
+ desc->l4i_chk = 0;
}
- mp->tx_curr_desc_q = 0;
- mp->tx_used_desc_q = 0;
+ /* ensure all other descriptors are written before first cmd_sts */
+ wmb();
+ desc->cmd_sts = cmd_sts;
+
+ /* ensure all descriptors are written before poking hardware */
+ wmb();
+ txq_enable(txq);
- mp->tx_desc_area_size = tx_desc_num * sizeof(struct eth_tx_desc);
+ txq->tx_desc_count += nr_frags + 1;
}
-static int mv643xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+static int mv643xx_eth_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- int err;
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
+ struct net_device_stats *stats = &dev->stats;
+ struct tx_queue *txq;
+ unsigned long flags;
- spin_lock_irq(&mp->lock);
- err = mii_ethtool_sset(&mp->mii, cmd);
- spin_unlock_irq(&mp->lock);
+ if (has_tiny_unaligned_frags(skb) && __skb_linearize(skb)) {
+ stats->tx_dropped++;
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "failed to linearize skb with tiny "
+ "unaligned fragment\n");
+ return NETDEV_TX_BUSY;
+ }
- return err;
-}
+ spin_lock_irqsave(&mp->lock, flags);
-static int mv643xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct mv643xx_private *mp = netdev_priv(dev);
- int err;
+ txq = mp->txq + mp->txq_primary;
- spin_lock_irq(&mp->lock);
- err = mii_ethtool_gset(&mp->mii, cmd);
- spin_unlock_irq(&mp->lock);
+ if (txq->tx_ring_size - txq->tx_desc_count < MAX_DESCS_PER_SKB) {
+ spin_unlock_irqrestore(&mp->lock, flags);
+ if (txq->index == mp->txq_primary && net_ratelimit())
+ dev_printk(KERN_ERR, &dev->dev,
+ "primary tx queue full?!\n");
+ kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
- /* The PHY may support 1000baseT_Half, but the mv643xx does not */
- cmd->supported &= ~SUPPORTED_1000baseT_Half;
- cmd->advertising &= ~ADVERTISED_1000baseT_Half;
+ txq_submit_skb(txq, skb);
+ stats->tx_bytes += skb->len;
+ stats->tx_packets++;
+ dev->trans_start = jiffies;
- return err;
+ if (txq->index == mp->txq_primary) {
+ int entries_left;
+
+ entries_left = txq->tx_ring_size - txq->tx_desc_count;
+ if (entries_left < MAX_DESCS_PER_SKB)
+ netif_stop_queue(dev);
+ }
+
+ spin_unlock_irqrestore(&mp->lock, flags);
+
+ return NETDEV_TX_OK;
}
+
+/* tx rate control **********************************************************/
/*
- * mv643xx_eth_open
- *
- * This function is called when openning the network device. The function
- * should initialize all the hardware, initialize cyclic Rx/Tx
- * descriptors chain and buffers and allocate an IRQ to the network
- * device.
- *
- * Input : a pointer to the network device structure
- *
- * Output : zero of success , nonzero if fails.
+ * Set total maximum TX rate (shared by all TX queues for this port)
+ * to 'rate' bits per second, with a maximum burst of 'burst' bytes.
*/
-
-static int mv643xx_eth_open(struct net_device *dev)
+static void tx_set_rate(struct mv643xx_eth_private *mp, int rate, int burst)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- unsigned int port_num = mp->port_num;
- unsigned int size;
- int err;
+ int token_rate;
+ int mtu;
+ int bucket_size;
- /* Clear any pending ethernet port interrupts */
- wrl(mp, INTERRUPT_CAUSE_REG(port_num), 0);
- wrl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
- /* wait for previous write to complete */
- rdl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num));
+ token_rate = ((rate / 1000) * 64) / (mp->shared->t_clk / 1000);
+ if (token_rate > 1023)
+ token_rate = 1023;
- err = request_irq(dev->irq, mv643xx_eth_int_handler,
- IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
- if (err) {
- printk(KERN_ERR "%s: Can not assign IRQ\n", dev->name);
- return -EAGAIN;
- }
+ mtu = (mp->dev->mtu + 255) >> 8;
+ if (mtu > 63)
+ mtu = 63;
- eth_port_init(mp);
+ bucket_size = (burst + 255) >> 8;
+ if (bucket_size > 65535)
+ bucket_size = 65535;
- memset(&mp->timeout, 0, sizeof(struct timer_list));
- mp->timeout.function = mv643xx_eth_rx_refill_descs_timer_wrapper;
- mp->timeout.data = (unsigned long)dev;
-
- /* Allocate RX and TX skb rings */
- mp->rx_skb = kmalloc(sizeof(*mp->rx_skb) * mp->rx_ring_size,
- GFP_KERNEL);
- if (!mp->rx_skb) {
- printk(KERN_ERR "%s: Cannot allocate Rx skb ring\n", dev->name);
- err = -ENOMEM;
- goto out_free_irq;
- }
- mp->tx_skb = kmalloc(sizeof(*mp->tx_skb) * mp->tx_ring_size,
- GFP_KERNEL);
- if (!mp->tx_skb) {
- printk(KERN_ERR "%s: Cannot allocate Tx skb ring\n", dev->name);
- err = -ENOMEM;
- goto out_free_rx_skb;
+ if (mp->shared->tx_bw_control_moved) {
+ wrl(mp, TX_BW_RATE_MOVED(mp->port_num), token_rate);
+ wrl(mp, TX_BW_MTU_MOVED(mp->port_num), mtu);
+ wrl(mp, TX_BW_BURST_MOVED(mp->port_num), bucket_size);
+ } else {
+ wrl(mp, TX_BW_RATE(mp->port_num), token_rate);
+ wrl(mp, TX_BW_MTU(mp->port_num), mtu);
+ wrl(mp, TX_BW_BURST(mp->port_num), bucket_size);
}
+}
- /* Allocate TX ring */
- mp->tx_desc_count = 0;
- size = mp->tx_ring_size * sizeof(struct eth_tx_desc);
- mp->tx_desc_area_size = size;
-
- if (mp->tx_sram_size) {
- mp->p_tx_desc_area = ioremap(mp->tx_sram_addr,
- mp->tx_sram_size);
- mp->tx_desc_dma = mp->tx_sram_addr;
- } else
- mp->p_tx_desc_area = dma_alloc_coherent(NULL, size,
- &mp->tx_desc_dma,
- GFP_KERNEL);
+static void txq_set_rate(struct tx_queue *txq, int rate, int burst)
+{
+ struct mv643xx_eth_private *mp = txq_to_mp(txq);
+ int token_rate;
+ int bucket_size;
- if (!mp->p_tx_desc_area) {
- printk(KERN_ERR "%s: Cannot allocate Tx Ring (size %d bytes)\n",
- dev->name, size);
- err = -ENOMEM;
- goto out_free_tx_skb;
- }
- BUG_ON((u32) mp->p_tx_desc_area & 0xf); /* check 16-byte alignment */
- memset((void *)mp->p_tx_desc_area, 0, mp->tx_desc_area_size);
-
- ether_init_tx_desc_ring(mp);
-
- /* Allocate RX ring */
- mp->rx_desc_count = 0;
- size = mp->rx_ring_size * sizeof(struct eth_rx_desc);
- mp->rx_desc_area_size = size;
-
- if (mp->rx_sram_size) {
- mp->p_rx_desc_area = ioremap(mp->rx_sram_addr,
- mp->rx_sram_size);
- mp->rx_desc_dma = mp->rx_sram_addr;
- } else
- mp->p_rx_desc_area = dma_alloc_coherent(NULL, size,
- &mp->rx_desc_dma,
- GFP_KERNEL);
+ token_rate = ((rate / 1000) * 64) / (mp->shared->t_clk / 1000);
+ if (token_rate > 1023)
+ token_rate = 1023;
- if (!mp->p_rx_desc_area) {
- printk(KERN_ERR "%s: Cannot allocate Rx ring (size %d bytes)\n",
- dev->name, size);
- printk(KERN_ERR "%s: Freeing previously allocated TX queues...",
- dev->name);
- if (mp->rx_sram_size)
- iounmap(mp->p_tx_desc_area);
- else
- dma_free_coherent(NULL, mp->tx_desc_area_size,
- mp->p_tx_desc_area, mp->tx_desc_dma);
- err = -ENOMEM;
- goto out_free_tx_skb;
- }
- memset((void *)mp->p_rx_desc_area, 0, size);
+ bucket_size = (burst + 255) >> 8;
+ if (bucket_size > 65535)
+ bucket_size = 65535;
- ether_init_rx_desc_ring(mp);
-
- mv643xx_eth_rx_refill_descs(dev); /* Fill RX ring with skb's */
+ wrl(mp, TXQ_BW_TOKENS(mp->port_num, txq->index), token_rate << 14);
+ wrl(mp, TXQ_BW_CONF(mp->port_num, txq->index),
+ (bucket_size << 10) | token_rate);
+}
-#ifdef MV643XX_NAPI
- napi_enable(&mp->napi);
-#endif
+static void txq_set_fixed_prio_mode(struct tx_queue *txq)
+{
+ struct mv643xx_eth_private *mp = txq_to_mp(txq);
+ int off;
+ u32 val;
- eth_port_start(dev);
+ /*
+ * Turn on fixed priority mode.
+ */
+ if (mp->shared->tx_bw_control_moved)
+ off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num);
+ else
+ off = TXQ_FIX_PRIO_CONF(mp->port_num);
- /* Interrupt Coalescing */
+ val = rdl(mp, off);
+ val |= 1 << txq->index;
+ wrl(mp, off, val);
+}
-#ifdef MV643XX_COAL
- mp->rx_int_coal =
- eth_port_set_rx_coal(mp, MV643XX_RX_COAL);
-#endif
+static void txq_set_wrr(struct tx_queue *txq, int weight)
+{
+ struct mv643xx_eth_private *mp = txq_to_mp(txq);
+ int off;
+ u32 val;
- mp->tx_int_coal =
- eth_port_set_tx_coal(mp, MV643XX_TX_COAL);
+ /*
+ * Turn off fixed priority mode.
+ */
+ if (mp->shared->tx_bw_control_moved)
+ off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num);
+ else
+ off = TXQ_FIX_PRIO_CONF(mp->port_num);
- /* Unmask phy and link status changes interrupts */
- wrl(mp, INTERRUPT_EXTEND_MASK_REG(port_num), ETH_INT_UNMASK_ALL_EXT);
+ val = rdl(mp, off);
+ val &= ~(1 << txq->index);
+ wrl(mp, off, val);
- /* Unmask RX buffer and TX end interrupt */
- wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
+ /*
+ * Configure WRR weight for this queue.
+ */
+ off = TXQ_BW_WRR_CONF(mp->port_num, txq->index);
- return 0;
+ val = rdl(mp, off);
+ val = (val & ~0xff) | (weight & 0xff);
+ wrl(mp, off, val);
+}
-out_free_tx_skb:
- kfree(mp->tx_skb);
-out_free_rx_skb:
- kfree(mp->rx_skb);
-out_free_irq:
- free_irq(dev->irq, dev);
- return err;
-}
+/* mii management interface *************************************************/
+#define SMI_BUSY 0x10000000
+#define SMI_READ_VALID 0x08000000
+#define SMI_OPCODE_READ 0x04000000
+#define SMI_OPCODE_WRITE 0x00000000
-static void mv643xx_eth_free_tx_rings(struct net_device *dev)
+static void smi_reg_read(struct mv643xx_eth_private *mp, unsigned int addr,
+ unsigned int reg, unsigned int *value)
{
- struct mv643xx_private *mp = netdev_priv(dev);
+ void __iomem *smi_reg = mp->shared_smi->base + SMI_REG;
+ unsigned long flags;
+ int i;
- /* Stop Tx Queues */
- mv643xx_eth_port_disable_tx(mp);
+ /* the SMI register is a shared resource */
+ spin_lock_irqsave(&mp->shared_smi->phy_lock, flags);
- /* Free outstanding skb's on TX ring */
- mv643xx_eth_free_all_tx_descs(dev);
+ /* wait for the SMI register to become available */
+ for (i = 0; readl(smi_reg) & SMI_BUSY; i++) {
+ if (i == 1000) {
+ printk("%s: PHY busy timeout\n", mp->dev->name);
+ goto out;
+ }
+ udelay(10);
+ }
- BUG_ON(mp->tx_used_desc_q != mp->tx_curr_desc_q);
+ writel(SMI_OPCODE_READ | (reg << 21) | (addr << 16), smi_reg);
- /* Free TX ring */
- if (mp->tx_sram_size)
- iounmap(mp->p_tx_desc_area);
- else
- dma_free_coherent(NULL, mp->tx_desc_area_size,
- mp->p_tx_desc_area, mp->tx_desc_dma);
+ /* now wait for the data to be valid */
+ for (i = 0; !(readl(smi_reg) & SMI_READ_VALID); i++) {
+ if (i == 1000) {
+ printk("%s: PHY read timeout\n", mp->dev->name);
+ goto out;
+ }
+ udelay(10);
+ }
+
+ *value = readl(smi_reg) & 0xffff;
+out:
+ spin_unlock_irqrestore(&mp->shared_smi->phy_lock, flags);
}
-static void mv643xx_eth_free_rx_rings(struct net_device *dev)
+static void smi_reg_write(struct mv643xx_eth_private *mp,
+ unsigned int addr,
+ unsigned int reg, unsigned int value)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- int curr;
+ void __iomem *smi_reg = mp->shared_smi->base + SMI_REG;
+ unsigned long flags;
+ int i;
- /* Stop RX Queues */
- mv643xx_eth_port_disable_rx(mp);
+ /* the SMI register is a shared resource */
+ spin_lock_irqsave(&mp->shared_smi->phy_lock, flags);
- /* Free preallocated skb's on RX rings */
- for (curr = 0; mp->rx_desc_count && curr < mp->rx_ring_size; curr++) {
- if (mp->rx_skb[curr]) {
- dev_kfree_skb(mp->rx_skb[curr]);
- mp->rx_desc_count--;
+ /* wait for the SMI register to become available */
+ for (i = 0; readl(smi_reg) & SMI_BUSY; i++) {
+ if (i == 1000) {
+ printk("%s: PHY busy timeout\n", mp->dev->name);
+ goto out;
}
+ udelay(10);
}
- if (mp->rx_desc_count)
- printk(KERN_ERR
- "%s: Error in freeing Rx Ring. %d skb's still"
- " stuck in RX Ring - ignoring them\n", dev->name,
- mp->rx_desc_count);
- /* Free RX ring */
- if (mp->rx_sram_size)
- iounmap(mp->p_rx_desc_area);
- else
- dma_free_coherent(NULL, mp->rx_desc_area_size,
- mp->p_rx_desc_area, mp->rx_desc_dma);
+ writel(SMI_OPCODE_WRITE | (reg << 21) |
+ (addr << 16) | (value & 0xffff), smi_reg);
+out:
+ spin_unlock_irqrestore(&mp->shared_smi->phy_lock, flags);
}
-/*
- * mv643xx_eth_stop
- *
- * This function is used when closing the network device.
- * It updates the hardware,
- * release all memory that holds buffers and descriptors and release the IRQ.
- * Input : a pointer to the device structure
- * Output : zero if success , nonzero if fails
- */
-static int mv643xx_eth_stop(struct net_device *dev)
+/* mib counters *************************************************************/
+static inline u32 mib_read(struct mv643xx_eth_private *mp, int offset)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- unsigned int port_num = mp->port_num;
+ return rdl(mp, MIB_COUNTERS(mp->port_num) + offset);
+}
- /* Mask all interrupts on ethernet port */
- wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
- /* wait for previous write to complete */
- rdl(mp, INTERRUPT_MASK_REG(port_num));
+static void mib_counters_clear(struct mv643xx_eth_private *mp)
+{
+ int i;
-#ifdef MV643XX_NAPI
- napi_disable(&mp->napi);
-#endif
- netif_carrier_off(dev);
- netif_stop_queue(dev);
+ for (i = 0; i < 0x80; i += 4)
+ mib_read(mp, i);
+}
+
+static void mib_counters_update(struct mv643xx_eth_private *mp)
+{
+ struct mib_counters *p = &mp->mib_counters;
+
+ p->good_octets_received += mib_read(mp, 0x00);
+ p->good_octets_received += (u64)mib_read(mp, 0x04) << 32;
+ p->bad_octets_received += mib_read(mp, 0x08);
+ p->internal_mac_transmit_err += mib_read(mp, 0x0c);
+ p->good_frames_received += mib_read(mp, 0x10);
+ p->bad_frames_received += mib_read(mp, 0x14);
+ p->broadcast_frames_received += mib_read(mp, 0x18);
+ p->multicast_frames_received += mib_read(mp, 0x1c);
+ p->frames_64_octets += mib_read(mp, 0x20);
+ p->frames_65_to_127_octets += mib_read(mp, 0x24);
+ p->frames_128_to_255_octets += mib_read(mp, 0x28);
+ p->frames_256_to_511_octets += mib_read(mp, 0x2c);
+ p->frames_512_to_1023_octets += mib_read(mp, 0x30);
+ p->frames_1024_to_max_octets += mib_read(mp, 0x34);
+ p->good_octets_sent += mib_read(mp, 0x38);
+ p->good_octets_sent += (u64)mib_read(mp, 0x3c) << 32;
+ p->good_frames_sent += mib_read(mp, 0x40);
+ p->excessive_collision += mib_read(mp, 0x44);
+ p->multicast_frames_sent += mib_read(mp, 0x48);
+ p->broadcast_frames_sent += mib_read(mp, 0x4c);
+ p->unrec_mac_control_received += mib_read(mp, 0x50);
+ p->fc_sent += mib_read(mp, 0x54);
+ p->good_fc_received += mib_read(mp, 0x58);
+ p->bad_fc_received += mib_read(mp, 0x5c);
+ p->undersize_received += mib_read(mp, 0x60);
+ p->fragments_received += mib_read(mp, 0x64);
+ p->oversize_received += mib_read(mp, 0x68);
+ p->jabber_received += mib_read(mp, 0x6c);
+ p->mac_receive_error += mib_read(mp, 0x70);
+ p->bad_crc_event += mib_read(mp, 0x74);
+ p->collision += mib_read(mp, 0x78);
+ p->late_collision += mib_read(mp, 0x7c);
+}
+
+
+/* ethtool ******************************************************************/
+struct mv643xx_eth_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int netdev_off;
+ int mp_off;
+};
+
+#define SSTAT(m) \
+ { #m, FIELD_SIZEOF(struct net_device_stats, m), \
+ offsetof(struct net_device, stats.m), -1 }
+
+#define MIBSTAT(m) \
+ { #m, FIELD_SIZEOF(struct mib_counters, m), \
+ -1, offsetof(struct mv643xx_eth_private, mib_counters.m) }
+
+static const struct mv643xx_eth_stats mv643xx_eth_stats[] = {
+ SSTAT(rx_packets),
+ SSTAT(tx_packets),
+ SSTAT(rx_bytes),
+ SSTAT(tx_bytes),
+ SSTAT(rx_errors),
+ SSTAT(tx_errors),
+ SSTAT(rx_dropped),
+ SSTAT(tx_dropped),
+ MIBSTAT(good_octets_received),
+ MIBSTAT(bad_octets_received),
+ MIBSTAT(internal_mac_transmit_err),
+ MIBSTAT(good_frames_received),
+ MIBSTAT(bad_frames_received),
+ MIBSTAT(broadcast_frames_received),
+ MIBSTAT(multicast_frames_received),
+ MIBSTAT(frames_64_octets),
+ MIBSTAT(frames_65_to_127_octets),
+ MIBSTAT(frames_128_to_255_octets),
+ MIBSTAT(frames_256_to_511_octets),
+ MIBSTAT(frames_512_to_1023_octets),
+ MIBSTAT(frames_1024_to_max_octets),
+ MIBSTAT(good_octets_sent),
+ MIBSTAT(good_frames_sent),
+ MIBSTAT(excessive_collision),
+ MIBSTAT(multicast_frames_sent),
+ MIBSTAT(broadcast_frames_sent),
+ MIBSTAT(unrec_mac_control_received),
+ MIBSTAT(fc_sent),
+ MIBSTAT(good_fc_received),
+ MIBSTAT(bad_fc_received),
+ MIBSTAT(undersize_received),
+ MIBSTAT(fragments_received),
+ MIBSTAT(oversize_received),
+ MIBSTAT(jabber_received),
+ MIBSTAT(mac_receive_error),
+ MIBSTAT(bad_crc_event),
+ MIBSTAT(collision),
+ MIBSTAT(late_collision),
+};
- eth_port_reset(mp);
+static int mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
+ int err;
- mv643xx_eth_free_tx_rings(dev);
- mv643xx_eth_free_rx_rings(dev);
+ spin_lock_irq(&mp->lock);
+ err = mii_ethtool_gset(&mp->mii, cmd);
+ spin_unlock_irq(&mp->lock);
- free_irq(dev->irq, dev);
+ /*
+ * The MAC does not support 1000baseT_Half.
+ */
+ cmd->supported &= ~SUPPORTED_1000baseT_Half;
+ cmd->advertising &= ~ADVERTISED_1000baseT_Half;
+
+ return err;
+}
+
+static int mv643xx_eth_get_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ cmd->supported = SUPPORTED_MII;
+ cmd->advertising = ADVERTISED_MII;
+ cmd->speed = SPEED_1000;
+ cmd->duplex = DUPLEX_FULL;
+ cmd->port = PORT_MII;
+ cmd->phy_address = 0;
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->autoneg = AUTONEG_DISABLE;
+ cmd->maxtxpkt = 1;
+ cmd->maxrxpkt = 1;
return 0;
}
-#ifdef MV643XX_NAPI
-/*
- * mv643xx_poll
- *
- * This function is used in case of NAPI
- */
-static int mv643xx_poll(struct napi_struct *napi, int budget)
+static int mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct mv643xx_private *mp = container_of(napi, struct mv643xx_private, napi);
- struct net_device *dev = mp->dev;
- unsigned int port_num = mp->port_num;
- int work_done;
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
+ int err;
-#ifdef MV643XX_TX_FAST_REFILL
- if (++mp->tx_clean_threshold > 5) {
- mv643xx_eth_free_completed_tx_descs(dev);
- mp->tx_clean_threshold = 0;
- }
-#endif
+ /*
+ * The MAC does not support 1000baseT_Half.
+ */
+ cmd->advertising &= ~ADVERTISED_1000baseT_Half;
- work_done = 0;
- if ((rdl(mp, RX_CURRENT_QUEUE_DESC_PTR_0(port_num)))
- != (u32) mp->rx_used_desc_q)
- work_done = mv643xx_eth_receive_queue(dev, budget);
+ spin_lock_irq(&mp->lock);
+ err = mii_ethtool_sset(&mp->mii, cmd);
+ spin_unlock_irq(&mp->lock);
- if (work_done < budget) {
- netif_rx_complete(dev, napi);
- wrl(mp, INTERRUPT_CAUSE_REG(port_num), 0);
- wrl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
- wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
- }
+ return err;
+}
- return work_done;
+static int mv643xx_eth_set_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ return -EINVAL;
}
-#endif
-/**
- * has_tiny_unaligned_frags - check if skb has any small, unaligned fragments
- *
- * Hardware can't handle unaligned fragments smaller than 9 bytes.
- * This helper function detects that case.
- */
+static void mv643xx_eth_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ strncpy(drvinfo->driver, mv643xx_eth_driver_name, 32);
+ strncpy(drvinfo->version, mv643xx_eth_driver_version, 32);
+ strncpy(drvinfo->fw_version, "N/A", 32);
+ strncpy(drvinfo->bus_info, "platform", 32);
+ drvinfo->n_stats = ARRAY_SIZE(mv643xx_eth_stats);
+}
-static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb)
+static int mv643xx_eth_nway_reset(struct net_device *dev)
{
- unsigned int frag;
- skb_frag_t *fragp;
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
- for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
- fragp = &skb_shinfo(skb)->frags[frag];
- if (fragp->size <= 8 && fragp->page_offset & 0x7)
- return 1;
- }
- return 0;
+ return mii_nway_restart(&mp->mii);
}
-/**
- * eth_alloc_tx_desc_index - return the index of the next available tx desc
- */
-static int eth_alloc_tx_desc_index(struct mv643xx_private *mp)
+static int mv643xx_eth_nway_reset_phyless(struct net_device *dev)
{
- int tx_desc_curr;
-
- BUG_ON(mp->tx_desc_count >= mp->tx_ring_size);
+ return -EINVAL;
+}
- tx_desc_curr = mp->tx_curr_desc_q;
- mp->tx_curr_desc_q = (tx_desc_curr + 1) % mp->tx_ring_size;
+static u32 mv643xx_eth_get_link(struct net_device *dev)
+{
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
- BUG_ON(mp->tx_curr_desc_q == mp->tx_used_desc_q);
+ return mii_link_ok(&mp->mii);
+}
- return tx_desc_curr;
+static u32 mv643xx_eth_get_link_phyless(struct net_device *dev)
+{
+ return 1;
}
-/**
- * eth_tx_fill_frag_descs - fill tx hw descriptors for an skb's fragments.
- *
- * Ensure the data for each fragment to be transmitted is mapped properly,
- * then fill in descriptors in the tx hw queue.
- */
-static void eth_tx_fill_frag_descs(struct mv643xx_private *mp,
- struct sk_buff *skb)
+static void mv643xx_eth_get_strings(struct net_device *dev,
+ uint32_t stringset, uint8_t *data)
{
- int frag;
- int tx_index;
- struct eth_tx_desc *desc;
+ int i;
- for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
- skb_frag_t *this_frag = &skb_shinfo(skb)->frags[frag];
-
- tx_index = eth_alloc_tx_desc_index(mp);
- desc = &mp->p_tx_desc_area[tx_index];
-
- desc->cmd_sts = ETH_BUFFER_OWNED_BY_DMA;
- /* Last Frag enables interrupt and frees the skb */
- if (frag == (skb_shinfo(skb)->nr_frags - 1)) {
- desc->cmd_sts |= ETH_ZERO_PADDING |
- ETH_TX_LAST_DESC |
- ETH_TX_ENABLE_INTERRUPT;
- mp->tx_skb[tx_index] = skb;
- } else
- mp->tx_skb[tx_index] = NULL;
-
- desc = &mp->p_tx_desc_area[tx_index];
- desc->l4i_chk = 0;
- desc->byte_cnt = this_frag->size;
- desc->buf_ptr = dma_map_page(NULL, this_frag->page,
- this_frag->page_offset,
- this_frag->size,
- DMA_TO_DEVICE);
+ if (stringset == ETH_SS_STATS) {
+ for (i = 0; i < ARRAY_SIZE(mv643xx_eth_stats); i++) {
+ memcpy(data + i * ETH_GSTRING_LEN,
+ mv643xx_eth_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ }
}
}
-static inline __be16 sum16_as_be(__sum16 sum)
+static void mv643xx_eth_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats,
+ uint64_t *data)
{
- return (__force __be16)sum;
-}
+ struct mv643xx_eth_private *mp = dev->priv;
+ int i;
-/**
- * eth_tx_submit_descs_for_skb - submit data from an skb to the tx hw
- *
- * Ensure the data for an skb to be transmitted is mapped properly,
- * then fill in descriptors in the tx hw queue and start the hardware.
- */
-static void eth_tx_submit_descs_for_skb(struct mv643xx_private *mp,
- struct sk_buff *skb)
-{
- int tx_index;
- struct eth_tx_desc *desc;
- u32 cmd_sts;
- int length;
- int nr_frags = skb_shinfo(skb)->nr_frags;
+ mib_counters_update(mp);
- cmd_sts = ETH_TX_FIRST_DESC | ETH_GEN_CRC | ETH_BUFFER_OWNED_BY_DMA;
+ for (i = 0; i < ARRAY_SIZE(mv643xx_eth_stats); i++) {
+ const struct mv643xx_eth_stats *stat;
+ void *p;
- tx_index = eth_alloc_tx_desc_index(mp);
- desc = &mp->p_tx_desc_area[tx_index];
+ stat = mv643xx_eth_stats + i;
- if (nr_frags) {
- eth_tx_fill_frag_descs(mp, skb);
+ if (stat->netdev_off >= 0)
+ p = ((void *)mp->dev) + stat->netdev_off;
+ else
+ p = ((void *)mp) + stat->mp_off;
- length = skb_headlen(skb);
- mp->tx_skb[tx_index] = NULL;
- } else {
- cmd_sts |= ETH_ZERO_PADDING |
- ETH_TX_LAST_DESC |
- ETH_TX_ENABLE_INTERRUPT;
- length = skb->len;
- mp->tx_skb[tx_index] = skb;
+ data[i] = (stat->sizeof_stat == 8) ?
+ *(uint64_t *)p : *(uint32_t *)p;
}
+}
- desc->byte_cnt = length;
- desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
+static int mv643xx_eth_get_sset_count(struct net_device *dev, int sset)
+{
+ if (sset == ETH_SS_STATS)
+ return ARRAY_SIZE(mv643xx_eth_stats);
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- BUG_ON(skb->protocol != htons(ETH_P_IP));
+ return -EOPNOTSUPP;
+}
- cmd_sts |= ETH_GEN_TCP_UDP_CHECKSUM |
- ETH_GEN_IP_V_4_CHECKSUM |
- ip_hdr(skb)->ihl << ETH_TX_IHL_SHIFT;
+static const struct ethtool_ops mv643xx_eth_ethtool_ops = {
+ .get_settings = mv643xx_eth_get_settings,
+ .set_settings = mv643xx_eth_set_settings,
+ .get_drvinfo = mv643xx_eth_get_drvinfo,
+ .nway_reset = mv643xx_eth_nway_reset,
+ .get_link = mv643xx_eth_get_link,
+ .set_sg = ethtool_op_set_sg,
+ .get_strings = mv643xx_eth_get_strings,
+ .get_ethtool_stats = mv643xx_eth_get_ethtool_stats,
+ .get_sset_count = mv643xx_eth_get_sset_count,
+};
- switch (ip_hdr(skb)->protocol) {
- case IPPROTO_UDP:
- cmd_sts |= ETH_UDP_FRAME;
- desc->l4i_chk = ntohs(sum16_as_be(udp_hdr(skb)->check));
- break;
- case IPPROTO_TCP:
- desc->l4i_chk = ntohs(sum16_as_be(tcp_hdr(skb)->check));
- break;
- default:
- BUG();
- }
- } else {
- /* Errata BTS #50, IHL must be 5 if no HW checksum */
- cmd_sts |= 5 << ETH_TX_IHL_SHIFT;
- desc->l4i_chk = 0;
- }
+static const struct ethtool_ops mv643xx_eth_ethtool_ops_phyless = {
+ .get_settings = mv643xx_eth_get_settings_phyless,
+ .set_settings = mv643xx_eth_set_settings_phyless,
+ .get_drvinfo = mv643xx_eth_get_drvinfo,
+ .nway_reset = mv643xx_eth_nway_reset_phyless,
+ .get_link = mv643xx_eth_get_link_phyless,
+ .set_sg = ethtool_op_set_sg,
+ .get_strings = mv643xx_eth_get_strings,
+ .get_ethtool_stats = mv643xx_eth_get_ethtool_stats,
+ .get_sset_count = mv643xx_eth_get_sset_count,
+};
- /* ensure all other descriptors are written before first cmd_sts */
- wmb();
- desc->cmd_sts = cmd_sts;
- /* ensure all descriptors are written before poking hardware */
- wmb();
- mv643xx_eth_port_enable_tx(mp, ETH_TX_QUEUES_ENABLED);
+/* address handling *********************************************************/
+static void uc_addr_get(struct mv643xx_eth_private *mp, unsigned char *addr)
+{
+ unsigned int mac_h;
+ unsigned int mac_l;
+
+ mac_h = rdl(mp, MAC_ADDR_HIGH(mp->port_num));
+ mac_l = rdl(mp, MAC_ADDR_LOW(mp->port_num));
- mp->tx_desc_count += nr_frags + 1;
+ addr[0] = (mac_h >> 24) & 0xff;
+ addr[1] = (mac_h >> 16) & 0xff;
+ addr[2] = (mac_h >> 8) & 0xff;
+ addr[3] = mac_h & 0xff;
+ addr[4] = (mac_l >> 8) & 0xff;
+ addr[5] = mac_l & 0xff;
}
-/**
- * mv643xx_eth_start_xmit - queue an skb to the hardware for transmission
- *
- */
-static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static void init_mac_tables(struct mv643xx_eth_private *mp)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- struct net_device_stats *stats = &dev->stats;
- unsigned long flags;
-
- BUG_ON(netif_queue_stopped(dev));
+ int i;
- if (has_tiny_unaligned_frags(skb) && __skb_linearize(skb)) {
- stats->tx_dropped++;
- printk(KERN_DEBUG "%s: failed to linearize tiny "
- "unaligned fragment\n", dev->name);
- return NETDEV_TX_BUSY;
+ for (i = 0; i < 0x100; i += 4) {
+ wrl(mp, SPECIAL_MCAST_TABLE(mp->port_num) + i, 0);
+ wrl(mp, OTHER_MCAST_TABLE(mp->port_num) + i, 0);
}
- spin_lock_irqsave(&mp->lock, flags);
+ for (i = 0; i < 0x10; i += 4)
+ wrl(mp, UNICAST_TABLE(mp->port_num) + i, 0);
+}
- if (mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB) {
- printk(KERN_ERR "%s: transmit with queue full\n", dev->name);
- netif_stop_queue(dev);
- spin_unlock_irqrestore(&mp->lock, flags);
- return NETDEV_TX_BUSY;
- }
+static void set_filter_table_entry(struct mv643xx_eth_private *mp,
+ int table, unsigned char entry)
+{
+ unsigned int table_reg;
- eth_tx_submit_descs_for_skb(mp, skb);
- stats->tx_bytes += skb->len;
- stats->tx_packets++;
- dev->trans_start = jiffies;
+ /* Set "accepts frame bit" at specified table entry */
+ table_reg = rdl(mp, table + (entry & 0xfc));
+ table_reg |= 0x01 << (8 * (entry & 3));
+ wrl(mp, table + (entry & 0xfc), table_reg);
+}
- if (mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB)
- netif_stop_queue(dev);
+static void uc_addr_set(struct mv643xx_eth_private *mp, unsigned char *addr)
+{
+ unsigned int mac_h;
+ unsigned int mac_l;
+ int table;
- spin_unlock_irqrestore(&mp->lock, flags);
+ mac_l = (addr[4] << 8) | addr[5];
+ mac_h = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
- return NETDEV_TX_OK;
+ wrl(mp, MAC_ADDR_LOW(mp->port_num), mac_l);
+ wrl(mp, MAC_ADDR_HIGH(mp->port_num), mac_h);
+
+ table = UNICAST_TABLE(mp->port_num);
+ set_filter_table_entry(mp, table, addr[5] & 0x0f);
}
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void mv643xx_netpoll(struct net_device *netdev)
+static int mv643xx_eth_set_mac_address(struct net_device *dev, void *addr)
{
- struct mv643xx_private *mp = netdev_priv(netdev);
- int port_num = mp->port_num;
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
- wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
- /* wait for previous write to complete */
- rdl(mp, INTERRUPT_MASK_REG(port_num));
+ /* +2 is for the offset of the HW addr type */
+ memcpy(dev->dev_addr, addr + 2, 6);
- mv643xx_eth_int_handler(netdev->irq, netdev);
+ init_mac_tables(mp);
+ uc_addr_set(mp, dev->dev_addr);
- wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
+ return 0;
}
-#endif
-static void mv643xx_init_ethtool_cmd(struct net_device *dev, int phy_address,
- int speed, int duplex,
- struct ethtool_cmd *cmd)
+static int addr_crc(unsigned char *addr)
{
- struct mv643xx_private *mp = netdev_priv(dev);
+ int crc = 0;
+ int i;
- memset(cmd, 0, sizeof(*cmd));
+ for (i = 0; i < 6; i++) {
+ int j;
- cmd->port = PORT_MII;
- cmd->transceiver = XCVR_INTERNAL;
- cmd->phy_address = phy_address;
-
- if (speed == 0) {
- cmd->autoneg = AUTONEG_ENABLE;
- /* mii lib checks, but doesn't use speed on AUTONEG_ENABLE */
- cmd->speed = SPEED_100;
- cmd->advertising = ADVERTISED_10baseT_Half |
- ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half |
- ADVERTISED_100baseT_Full;
- if (mp->mii.supports_gmii)
- cmd->advertising |= ADVERTISED_1000baseT_Full;
- } else {
- cmd->autoneg = AUTONEG_DISABLE;
- cmd->speed = speed;
- cmd->duplex = duplex;
+ crc = (crc ^ addr[i]) << 8;
+ for (j = 7; j >= 0; j--) {
+ if (crc & (0x100 << j))
+ crc ^= 0x107 << j;
+ }
}
+
+ return crc;
}
-/*/
- * mv643xx_eth_probe
- *
- * First function called after registering the network device.
- * It's purpose is to initialize the device as an ethernet device,
- * fill the ethernet device structure with pointers * to functions,
- * and set the MAC address of the interface
- *
- * Input : struct device *
- * Output : -ENOMEM if failed , 0 if success
- */
-static int mv643xx_eth_probe(struct platform_device *pdev)
+static void mv643xx_eth_set_rx_mode(struct net_device *dev)
{
- struct mv643xx_eth_platform_data *pd;
- int port_num;
- struct mv643xx_private *mp;
- struct net_device *dev;
- u8 *p;
- struct resource *res;
- int err;
- struct ethtool_cmd cmd;
- int duplex = DUPLEX_HALF;
- int speed = 0; /* default to auto-negotiation */
- DECLARE_MAC_BUF(mac);
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
+ u32 port_config;
+ struct dev_addr_list *addr;
+ int i;
- pd = pdev->dev.platform_data;
- if (pd == NULL) {
- printk(KERN_ERR "No mv643xx_eth_platform_data\n");
- return -ENODEV;
+ port_config = rdl(mp, PORT_CONFIG(mp->port_num));
+ if (dev->flags & IFF_PROMISC)
+ port_config |= UNICAST_PROMISCUOUS_MODE;
+ else
+ port_config &= ~UNICAST_PROMISCUOUS_MODE;
+ wrl(mp, PORT_CONFIG(mp->port_num), port_config);
+
+ if (dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) {
+ int port_num = mp->port_num;
+ u32 accept = 0x01010101;
+
+ for (i = 0; i < 0x100; i += 4) {
+ wrl(mp, SPECIAL_MCAST_TABLE(port_num) + i, accept);
+ wrl(mp, OTHER_MCAST_TABLE(port_num) + i, accept);
+ }
+ return;
}
- if (pd->shared == NULL) {
- printk(KERN_ERR "No mv643xx_eth_platform_data->shared\n");
- return -ENODEV;
+ for (i = 0; i < 0x100; i += 4) {
+ wrl(mp, SPECIAL_MCAST_TABLE(mp->port_num) + i, 0);
+ wrl(mp, OTHER_MCAST_TABLE(mp->port_num) + i, 0);
}
- dev = alloc_etherdev(sizeof(struct mv643xx_private));
- if (!dev)
- return -ENOMEM;
+ for (addr = dev->mc_list; addr != NULL; addr = addr->next) {
+ u8 *a = addr->da_addr;
+ int table;
- platform_set_drvdata(pdev, dev);
+ if (addr->da_addrlen != 6)
+ continue;
- mp = netdev_priv(dev);
- mp->dev = dev;
-#ifdef MV643XX_NAPI
- netif_napi_add(dev, &mp->napi, mv643xx_poll, 64);
-#endif
+ if (memcmp(a, "\x01\x00\x5e\x00\x00", 5) == 0) {
+ table = SPECIAL_MCAST_TABLE(mp->port_num);
+ set_filter_table_entry(mp, table, a[5]);
+ } else {
+ int crc = addr_crc(a);
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- BUG_ON(!res);
- dev->irq = res->start;
+ table = OTHER_MCAST_TABLE(mp->port_num);
+ set_filter_table_entry(mp, table, crc);
+ }
+ }
+}
- dev->open = mv643xx_eth_open;
- dev->stop = mv643xx_eth_stop;
- dev->hard_start_xmit = mv643xx_eth_start_xmit;
- dev->set_mac_address = mv643xx_eth_set_mac_address;
- dev->set_multicast_list = mv643xx_eth_set_rx_mode;
- /* No need to Tx Timeout */
- dev->tx_timeout = mv643xx_eth_tx_timeout;
+/* rx/tx queue initialisation ***********************************************/
+static int rxq_init(struct mv643xx_eth_private *mp, int index)
+{
+ struct rx_queue *rxq = mp->rxq + index;
+ struct rx_desc *rx_desc;
+ int size;
+ int i;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = mv643xx_netpoll;
-#endif
+ rxq->index = index;
- dev->watchdog_timeo = 2 * HZ;
- dev->base_addr = 0;
- dev->change_mtu = mv643xx_eth_change_mtu;
- dev->do_ioctl = mv643xx_eth_do_ioctl;
- SET_ETHTOOL_OPS(dev, &mv643xx_ethtool_ops);
+ rxq->rx_ring_size = mp->default_rx_ring_size;
-#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
-#ifdef MAX_SKB_FRAGS
- /*
- * Zero copy can only work if we use Discovery II memory. Else, we will
- * have to map the buffers to ISA memory which is only 16 MB
- */
- dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
-#endif
-#endif
+ rxq->rx_desc_count = 0;
+ rxq->rx_curr_desc = 0;
+ rxq->rx_used_desc = 0;
- /* Configure the timeout task */
- INIT_WORK(&mp->tx_timeout_task, mv643xx_eth_tx_timeout_task);
+ size = rxq->rx_ring_size * sizeof(struct rx_desc);
- spin_lock_init(&mp->lock);
+ if (index == mp->rxq_primary && size <= mp->rx_desc_sram_size) {
+ rxq->rx_desc_area = ioremap(mp->rx_desc_sram_addr,
+ mp->rx_desc_sram_size);
+ rxq->rx_desc_dma = mp->rx_desc_sram_addr;
+ } else {
+ rxq->rx_desc_area = dma_alloc_coherent(NULL, size,
+ &rxq->rx_desc_dma,
+ GFP_KERNEL);
+ }
- mp->shared = platform_get_drvdata(pd->shared);
- port_num = mp->port_num = pd->port_number;
+ if (rxq->rx_desc_area == NULL) {
+ dev_printk(KERN_ERR, &mp->dev->dev,
+ "can't allocate rx ring (%d bytes)\n", size);
+ goto out;
+ }
+ memset(rxq->rx_desc_area, 0, size);
- if (mp->shared->win_protect)
- wrl(mp, WINDOW_PROTECT(port_num), mp->shared->win_protect);
+ rxq->rx_desc_area_size = size;
+ rxq->rx_skb = kmalloc(rxq->rx_ring_size * sizeof(*rxq->rx_skb),
+ GFP_KERNEL);
+ if (rxq->rx_skb == NULL) {
+ dev_printk(KERN_ERR, &mp->dev->dev,
+ "can't allocate rx skb ring\n");
+ goto out_free;
+ }
- mp->shared_smi = mp->shared;
- if (pd->shared_smi != NULL)
- mp->shared_smi = platform_get_drvdata(pd->shared_smi);
+ rx_desc = (struct rx_desc *)rxq->rx_desc_area;
+ for (i = 0; i < rxq->rx_ring_size; i++) {
+ int nexti = (i + 1) % rxq->rx_ring_size;
+ rx_desc[i].next_desc_ptr = rxq->rx_desc_dma +
+ nexti * sizeof(struct rx_desc);
+ }
- /* set default config values */
- eth_port_uc_addr_get(mp, dev->dev_addr);
- mp->rx_ring_size = PORT_DEFAULT_RECEIVE_QUEUE_SIZE;
- mp->tx_ring_size = PORT_DEFAULT_TRANSMIT_QUEUE_SIZE;
+ init_timer(&rxq->rx_oom);
+ rxq->rx_oom.data = (unsigned long)rxq;
+ rxq->rx_oom.function = rxq_refill_timer_wrapper;
- if (is_valid_ether_addr(pd->mac_addr))
- memcpy(dev->dev_addr, pd->mac_addr, 6);
+ return 0;
- if (pd->phy_addr || pd->force_phy_addr)
- ethernet_phy_set(mp, pd->phy_addr);
- if (pd->rx_queue_size)
- mp->rx_ring_size = pd->rx_queue_size;
+out_free:
+ if (index == mp->rxq_primary && size <= mp->rx_desc_sram_size)
+ iounmap(rxq->rx_desc_area);
+ else
+ dma_free_coherent(NULL, size,
+ rxq->rx_desc_area,
+ rxq->rx_desc_dma);
- if (pd->tx_queue_size)
- mp->tx_ring_size = pd->tx_queue_size;
+out:
+ return -ENOMEM;
+}
- if (pd->tx_sram_size) {
- mp->tx_sram_size = pd->tx_sram_size;
- mp->tx_sram_addr = pd->tx_sram_addr;
- }
+static void rxq_deinit(struct rx_queue *rxq)
+{
+ struct mv643xx_eth_private *mp = rxq_to_mp(rxq);
+ int i;
- if (pd->rx_sram_size) {
- mp->rx_sram_size = pd->rx_sram_size;
- mp->rx_sram_addr = pd->rx_sram_addr;
- }
+ rxq_disable(rxq);
- duplex = pd->duplex;
- speed = pd->speed;
+ del_timer_sync(&rxq->rx_oom);
- /* Hook up MII support for ethtool */
- mp->mii.dev = dev;
- mp->mii.mdio_read = mv643xx_mdio_read;
- mp->mii.mdio_write = mv643xx_mdio_write;
- mp->mii.phy_id = ethernet_phy_get(mp);
- mp->mii.phy_id_mask = 0x3f;
- mp->mii.reg_num_mask = 0x1f;
+ for (i = 0; i < rxq->rx_ring_size; i++) {
+ if (rxq->rx_skb[i]) {
+ dev_kfree_skb(rxq->rx_skb[i]);
+ rxq->rx_desc_count--;
+ }
+ }
- err = ethernet_phy_detect(mp);
- if (err) {
- pr_debug("%s: No PHY detected at addr %d\n",
- dev->name, ethernet_phy_get(mp));
- goto out;
+ if (rxq->rx_desc_count) {
+ dev_printk(KERN_ERR, &mp->dev->dev,
+ "error freeing rx ring -- %d skbs stuck\n",
+ rxq->rx_desc_count);
}
- ethernet_phy_reset(mp);
- mp->mii.supports_gmii = mii_check_gmii_support(&mp->mii);
- mv643xx_init_ethtool_cmd(dev, mp->mii.phy_id, speed, duplex, &cmd);
- mv643xx_eth_update_pscr(dev, &cmd);
- mv643xx_set_settings(dev, &cmd);
+ if (rxq->index == mp->rxq_primary &&
+ rxq->rx_desc_area_size <= mp->rx_desc_sram_size)
+ iounmap(rxq->rx_desc_area);
+ else
+ dma_free_coherent(NULL, rxq->rx_desc_area_size,
+ rxq->rx_desc_area, rxq->rx_desc_dma);
- SET_NETDEV_DEV(dev, &pdev->dev);
- err = register_netdev(dev);
- if (err)
- goto out;
+ kfree(rxq->rx_skb);
+}
- p = dev->dev_addr;
- printk(KERN_NOTICE
- "%s: port %d with MAC address %s\n",
- dev->name, port_num, print_mac(mac, p));
+static int txq_init(struct mv643xx_eth_private *mp, int index)
+{
+ struct tx_queue *txq = mp->txq + index;
+ struct tx_desc *tx_desc;
+ int size;
+ int i;
- if (dev->features & NETIF_F_SG)
- printk(KERN_NOTICE "%s: Scatter Gather Enabled\n", dev->name);
+ txq->index = index;
- if (dev->features & NETIF_F_IP_CSUM)
- printk(KERN_NOTICE "%s: TX TCP/IP Checksumming Supported\n",
- dev->name);
+ txq->tx_ring_size = mp->default_tx_ring_size;
-#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
- printk(KERN_NOTICE "%s: RX TCP/UDP Checksum Offload ON \n", dev->name);
-#endif
+ txq->tx_desc_count = 0;
+ txq->tx_curr_desc = 0;
+ txq->tx_used_desc = 0;
-#ifdef MV643XX_COAL
- printk(KERN_NOTICE "%s: TX and RX Interrupt Coalescing ON \n",
- dev->name);
-#endif
+ size = txq->tx_ring_size * sizeof(struct tx_desc);
-#ifdef MV643XX_NAPI
- printk(KERN_NOTICE "%s: RX NAPI Enabled \n", dev->name);
-#endif
+ if (index == mp->txq_primary && size <= mp->tx_desc_sram_size) {
+ txq->tx_desc_area = ioremap(mp->tx_desc_sram_addr,
+ mp->tx_desc_sram_size);
+ txq->tx_desc_dma = mp->tx_desc_sram_addr;
+ } else {
+ txq->tx_desc_area = dma_alloc_coherent(NULL, size,
+ &txq->tx_desc_dma,
+ GFP_KERNEL);
+ }
+
+ if (txq->tx_desc_area == NULL) {
+ dev_printk(KERN_ERR, &mp->dev->dev,
+ "can't allocate tx ring (%d bytes)\n", size);
+ goto out;
+ }
+ memset(txq->tx_desc_area, 0, size);
- if (mp->tx_sram_size > 0)
- printk(KERN_NOTICE "%s: Using SRAM\n", dev->name);
+ txq->tx_desc_area_size = size;
+ txq->tx_skb = kmalloc(txq->tx_ring_size * sizeof(*txq->tx_skb),
+ GFP_KERNEL);
+ if (txq->tx_skb == NULL) {
+ dev_printk(KERN_ERR, &mp->dev->dev,
+ "can't allocate tx skb ring\n");
+ goto out_free;
+ }
+
+ tx_desc = (struct tx_desc *)txq->tx_desc_area;
+ for (i = 0; i < txq->tx_ring_size; i++) {
+ int nexti = (i + 1) % txq->tx_ring_size;
+ tx_desc[i].next_desc_ptr = txq->tx_desc_dma +
+ nexti * sizeof(struct tx_desc);
+ }
return 0;
-out:
- free_netdev(dev);
- return err;
+out_free:
+ if (index == mp->txq_primary && size <= mp->tx_desc_sram_size)
+ iounmap(txq->tx_desc_area);
+ else
+ dma_free_coherent(NULL, size,
+ txq->tx_desc_area,
+ txq->tx_desc_dma);
+
+out:
+ return -ENOMEM;
}
-static int mv643xx_eth_remove(struct platform_device *pdev)
+static void txq_reclaim(struct tx_queue *txq, int force)
{
- struct net_device *dev = platform_get_drvdata(pdev);
+ struct mv643xx_eth_private *mp = txq_to_mp(txq);
+ unsigned long flags;
- unregister_netdev(dev);
- flush_scheduled_work();
+ spin_lock_irqsave(&mp->lock, flags);
+ while (txq->tx_desc_count > 0) {
+ int tx_index;
+ struct tx_desc *desc;
+ u32 cmd_sts;
+ struct sk_buff *skb;
+ dma_addr_t addr;
+ int count;
+
+ tx_index = txq->tx_used_desc;
+ desc = &txq->tx_desc_area[tx_index];
+ cmd_sts = desc->cmd_sts;
- free_netdev(dev);
- platform_set_drvdata(pdev, NULL);
- return 0;
-}
+ if (!force && (cmd_sts & BUFFER_OWNED_BY_DMA))
+ break;
-static void mv643xx_eth_conf_mbus_windows(struct mv643xx_shared_private *msp,
- struct mbus_dram_target_info *dram)
-{
- void __iomem *base = msp->eth_base;
- u32 win_enable;
- u32 win_protect;
- int i;
+ txq->tx_used_desc = (tx_index + 1) % txq->tx_ring_size;
+ txq->tx_desc_count--;
- for (i = 0; i < 6; i++) {
- writel(0, base + WINDOW_BASE(i));
- writel(0, base + WINDOW_SIZE(i));
- if (i < 4)
- writel(0, base + WINDOW_REMAP_HIGH(i));
- }
+ addr = desc->buf_ptr;
+ count = desc->byte_cnt;
+ skb = txq->tx_skb[tx_index];
+ txq->tx_skb[tx_index] = NULL;
- win_enable = 0x3f;
- win_protect = 0;
+ if (cmd_sts & ERROR_SUMMARY) {
+ dev_printk(KERN_INFO, &mp->dev->dev, "tx error\n");
+ mp->dev->stats.tx_errors++;
+ }
- for (i = 0; i < dram->num_cs; i++) {
- struct mbus_dram_window *cs = dram->cs + i;
+ /*
+ * Drop mp->lock while we free the skb.
+ */
+ spin_unlock_irqrestore(&mp->lock, flags);
- writel((cs->base & 0xffff0000) |
- (cs->mbus_attr << 8) |
- dram->mbus_dram_target_id, base + WINDOW_BASE(i));
- writel((cs->size - 1) & 0xffff0000, base + WINDOW_SIZE(i));
+ if (cmd_sts & TX_FIRST_DESC)
+ dma_unmap_single(NULL, addr, count, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(NULL, addr, count, DMA_TO_DEVICE);
- win_enable &= ~(1 << i);
- win_protect |= 3 << (2 * i);
- }
+ if (skb)
+ dev_kfree_skb_irq(skb);
- writel(win_enable, base + WINDOW_BAR_ENABLE);
- msp->win_protect = win_protect;
+ spin_lock_irqsave(&mp->lock, flags);
+ }
+ spin_unlock_irqrestore(&mp->lock, flags);
}
-static int mv643xx_eth_shared_probe(struct platform_device *pdev)
+static void txq_deinit(struct tx_queue *txq)
{
- static int mv643xx_version_printed = 0;
- struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data;
- struct mv643xx_shared_private *msp;
- struct resource *res;
- int ret;
+ struct mv643xx_eth_private *mp = txq_to_mp(txq);
- if (!mv643xx_version_printed++)
- printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n");
+ txq_disable(txq);
+ txq_reclaim(txq, 1);
- ret = -EINVAL;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL)
- goto out;
+ BUG_ON(txq->tx_used_desc != txq->tx_curr_desc);
- ret = -ENOMEM;
- msp = kmalloc(sizeof(*msp), GFP_KERNEL);
- if (msp == NULL)
- goto out;
- memset(msp, 0, sizeof(*msp));
+ if (txq->index == mp->txq_primary &&
+ txq->tx_desc_area_size <= mp->tx_desc_sram_size)
+ iounmap(txq->tx_desc_area);
+ else
+ dma_free_coherent(NULL, txq->tx_desc_area_size,
+ txq->tx_desc_area, txq->tx_desc_dma);
- msp->eth_base = ioremap(res->start, res->end - res->start + 1);
- if (msp->eth_base == NULL)
- goto out_free;
+ kfree(txq->tx_skb);
+}
- spin_lock_init(&msp->phy_lock);
- msp->t_clk = (pd != NULL && pd->t_clk != 0) ? pd->t_clk : 133000000;
- platform_set_drvdata(pdev, msp);
+/* netdev ops and related ***************************************************/
+static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex)
+{
+ u32 pscr_o;
+ u32 pscr_n;
- /*
- * (Re-)program MBUS remapping windows if we are asked to.
- */
- if (pd != NULL && pd->dram != NULL)
- mv643xx_eth_conf_mbus_windows(msp, pd->dram);
+ pscr_o = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
- return 0;
+ /* clear speed, duplex and rx buffer size fields */
+ pscr_n = pscr_o & ~(SET_MII_SPEED_TO_100 |
+ SET_GMII_SPEED_TO_1000 |
+ SET_FULL_DUPLEX_MODE |
+ MAX_RX_PACKET_MASK);
-out_free:
- kfree(msp);
-out:
- return ret;
-}
+ if (speed == SPEED_1000) {
+ pscr_n |= SET_GMII_SPEED_TO_1000 | MAX_RX_PACKET_9700BYTE;
+ } else {
+ if (speed == SPEED_100)
+ pscr_n |= SET_MII_SPEED_TO_100;
+ pscr_n |= MAX_RX_PACKET_1522BYTE;
+ }
-static int mv643xx_eth_shared_remove(struct platform_device *pdev)
-{
- struct mv643xx_shared_private *msp = platform_get_drvdata(pdev);
+ if (duplex == DUPLEX_FULL)
+ pscr_n |= SET_FULL_DUPLEX_MODE;
- iounmap(msp->eth_base);
- kfree(msp);
+ if (pscr_n != pscr_o) {
+ if ((pscr_o & SERIAL_PORT_ENABLE) == 0)
+ wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
+ else {
+ int i;
- return 0;
+ for (i = 0; i < 8; i++)
+ if (mp->txq_mask & (1 << i))
+ txq_disable(mp->txq + i);
+
+ pscr_o &= ~SERIAL_PORT_ENABLE;
+ wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_o);
+ wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
+ wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
+
+ for (i = 0; i < 8; i++)
+ if (mp->txq_mask & (1 << i))
+ txq_enable(mp->txq + i);
+ }
+ }
}
-static void mv643xx_eth_shutdown(struct platform_device *pdev)
+static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct mv643xx_private *mp = netdev_priv(dev);
- unsigned int port_num = mp->port_num;
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
+ u32 int_cause;
+ u32 int_cause_ext;
+ u32 txq_active;
+
+ int_cause = rdl(mp, INT_CAUSE(mp->port_num)) &
+ (INT_TX_END | INT_RX | INT_EXT);
+ if (int_cause == 0)
+ return IRQ_NONE;
- /* Mask all interrupts on ethernet port */
- wrl(mp, INTERRUPT_MASK_REG(port_num), 0);
- rdl(mp, INTERRUPT_MASK_REG(port_num));
+ int_cause_ext = 0;
+ if (int_cause & INT_EXT) {
+ int_cause_ext = rdl(mp, INT_CAUSE_EXT(mp->port_num))
+ & (INT_EXT_LINK | INT_EXT_PHY | INT_EXT_TX);
+ wrl(mp, INT_CAUSE_EXT(mp->port_num), ~int_cause_ext);
+ }
- eth_port_reset(mp);
-}
+ if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) {
+ if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) {
+ int i;
-static struct platform_driver mv643xx_eth_driver = {
- .probe = mv643xx_eth_probe,
- .remove = mv643xx_eth_remove,
- .shutdown = mv643xx_eth_shutdown,
- .driver = {
- .name = MV643XX_ETH_NAME,
- .owner = THIS_MODULE,
- },
-};
+ if (mp->phy_addr != -1) {
+ struct ethtool_cmd cmd;
-static struct platform_driver mv643xx_eth_shared_driver = {
- .probe = mv643xx_eth_shared_probe,
- .remove = mv643xx_eth_shared_remove,
- .driver = {
- .name = MV643XX_ETH_SHARED_NAME,
- .owner = THIS_MODULE,
- },
-};
+ mii_ethtool_gset(&mp->mii, &cmd);
+ update_pscr(mp, cmd.speed, cmd.duplex);
+ }
-/*
- * mv643xx_init_module
- *
- * Registers the network drivers into the Linux kernel
- *
- * Input : N/A
- *
- * Output : N/A
- */
-static int __init mv643xx_init_module(void)
-{
- int rc;
+ for (i = 0; i < 8; i++)
+ if (mp->txq_mask & (1 << i))
+ txq_enable(mp->txq + i);
- rc = platform_driver_register(&mv643xx_eth_shared_driver);
- if (!rc) {
- rc = platform_driver_register(&mv643xx_eth_driver);
- if (rc)
- platform_driver_unregister(&mv643xx_eth_shared_driver);
+ if (!netif_carrier_ok(dev)) {
+ netif_carrier_on(dev);
+ __txq_maybe_wake(mp->txq + mp->txq_primary);
+ }
+ } else if (netif_carrier_ok(dev)) {
+ netif_stop_queue(dev);
+ netif_carrier_off(dev);
+ }
}
- return rc;
-}
-/*
- * mv643xx_cleanup_module
- *
- * Registers the network drivers into the Linux kernel
- *
- * Input : N/A
- *
- * Output : N/A
- */
-static void __exit mv643xx_cleanup_module(void)
-{
- platform_driver_unregister(&mv643xx_eth_driver);
- platform_driver_unregister(&mv643xx_eth_shared_driver);
-}
+ /*
+ * RxBuffer or RxError set for any of the 8 queues?
+ */
+#ifdef MV643XX_ETH_NAPI
+ if (int_cause & INT_RX) {
+ wrl(mp, INT_MASK(mp->port_num), 0x00000000);
+ rdl(mp, INT_MASK(mp->port_num));
-module_init(mv643xx_init_module);
-module_exit(mv643xx_cleanup_module);
+ netif_rx_schedule(dev, &mp->napi);
+ }
+#else
+ if (int_cause & INT_RX) {
+ int i;
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR( "Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, Manish Lachwani"
- " and Dale Farnsworth");
-MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX");
-MODULE_ALIAS("platform:" MV643XX_ETH_NAME);
-MODULE_ALIAS("platform:" MV643XX_ETH_SHARED_NAME);
+ for (i = 7; i >= 0; i--)
+ if (mp->rxq_mask & (1 << i))
+ rxq_process(mp->rxq + i, INT_MAX);
+ }
+#endif
-/*
- * The second part is the low level driver of the gigE ethernet ports.
- */
+ txq_active = rdl(mp, TXQ_COMMAND(mp->port_num));
-/*
- * Marvell's Gigabit Ethernet controller low level driver
- *
- * DESCRIPTION:
- * This file introduce low level API to Marvell's Gigabit Ethernet
- * controller. This Gigabit Ethernet Controller driver API controls
- * 1) Operations (i.e. port init, start, reset etc').
- * 2) Data flow (i.e. port send, receive etc').
- * Each Gigabit Ethernet port is controlled via
- * struct mv643xx_private.
- * This struct includes user configuration information as well as
- * driver internal data needed for its operations.
- *
- * Supported Features:
- * - This low level driver is OS independent. Allocating memory for
- * the descriptor rings and buffers are not within the scope of
- * this driver.
- * - The user is free from Rx/Tx queue managing.
- * - This low level driver introduce functionality API that enable
- * the to operate Marvell's Gigabit Ethernet Controller in a
- * convenient way.
- * - Simple Gigabit Ethernet port operation API.
- * - Simple Gigabit Ethernet port data flow API.
- * - Data flow and operation API support per queue functionality.
- * - Support cached descriptors for better performance.
- * - Enable access to all four DRAM banks and internal SRAM memory
- * spaces.
- * - PHY access and control API.
- * - Port control register configuration API.
- * - Full control over Unicast and Multicast MAC configurations.
- *
- * Operation flow:
- *
- * Initialization phase
- * This phase complete the initialization of the the
- * mv643xx_private struct.
- * User information regarding port configuration has to be set
- * prior to calling the port initialization routine.
- *
- * In this phase any port Tx/Rx activity is halted, MIB counters
- * are cleared, PHY address is set according to user parameter and
- * access to DRAM and internal SRAM memory spaces.
- *
- * Driver ring initialization
- * Allocating memory for the descriptor rings and buffers is not
- * within the scope of this driver. Thus, the user is required to
- * allocate memory for the descriptors ring and buffers. Those
- * memory parameters are used by the Rx and Tx ring initialization
- * routines in order to curve the descriptor linked list in a form
- * of a ring.
- * Note: Pay special attention to alignment issues when using
- * cached descriptors/buffers. In this phase the driver store
- * information in the mv643xx_private struct regarding each queue
- * ring.
- *
- * Driver start
- * This phase prepares the Ethernet port for Rx and Tx activity.
- * It uses the information stored in the mv643xx_private struct to
- * initialize the various port registers.
- *
- * Data flow:
- * All packet references to/from the driver are done using
- * struct pkt_info.
- * This struct is a unified struct used with Rx and Tx operations.
- * This way the user is not required to be familiar with neither
- * Tx nor Rx descriptors structures.
- * The driver's descriptors rings are management by indexes.
- * Those indexes controls the ring resources and used to indicate
- * a SW resource error:
- * 'current'
- * This index points to the current available resource for use. For
- * example in Rx process this index will point to the descriptor
- * that will be passed to the user upon calling the receive
- * routine. In Tx process, this index will point to the descriptor
- * that will be assigned with the user packet info and transmitted.
- * 'used'
- * This index points to the descriptor that need to restore its
- * resources. For example in Rx process, using the Rx buffer return
- * API will attach the buffer returned in packet info to the
- * descriptor pointed by 'used'. In Tx process, using the Tx
- * descriptor return will merely return the user packet info with
- * the command status of the transmitted buffer pointed by the
- * 'used' index. Nevertheless, it is essential to use this routine
- * to update the 'used' index.
- * 'first'
- * This index supports Tx Scatter-Gather. It points to the first
- * descriptor of a packet assembled of multiple buffers. For
- * example when in middle of Such packet we have a Tx resource
- * error the 'curr' index get the value of 'first' to indicate
- * that the ring returned to its state before trying to transmit
- * this packet.
- *
- * Receive operation:
- * The eth_port_receive API set the packet information struct,
- * passed by the caller, with received information from the
- * 'current' SDMA descriptor.
- * It is the user responsibility to return this resource back
- * to the Rx descriptor ring to enable the reuse of this source.
- * Return Rx resource is done using the eth_rx_return_buff API.
- *
- * Prior to calling the initialization routine eth_port_init() the user
- * must set the following fields under mv643xx_private struct:
- * port_num User Ethernet port number.
- * port_config User port configuration value.
- * port_config_extend User port config extend value.
- * port_sdma_config User port SDMA config value.
- * port_serial_control User port serial control value.
- *
- * This driver data flow is done using the struct pkt_info which
- * is a unified struct for Rx and Tx operations:
- *
- * byte_cnt Tx/Rx descriptor buffer byte count.
- * l4i_chk CPU provided TCP Checksum. For Tx operation
- * only.
- * cmd_sts Tx/Rx descriptor command status.
- * buf_ptr Tx/Rx descriptor buffer pointer.
- * return_info Tx/Rx user resource return information.
- */
+ /*
+ * TxBuffer or TxError set for any of the 8 queues?
+ */
+ if (int_cause_ext & INT_EXT_TX) {
+ int i;
-/* Ethernet Port routines */
-static void eth_port_set_filter_table_entry(struct mv643xx_private *mp,
- int table, unsigned char entry);
+ for (i = 0; i < 8; i++)
+ if (mp->txq_mask & (1 << i))
+ txq_reclaim(mp->txq + i, 0);
+ }
-/*
- * eth_port_init - Initialize the Ethernet port driver
- *
- * DESCRIPTION:
- * This function prepares the ethernet port to start its activity:
- * 1) Completes the ethernet port driver struct initialization toward port
- * start routine.
- * 2) Resets the device to a quiescent state in case of warm reboot.
- * 3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
- * 4) Clean MAC tables. The reset status of those tables is unknown.
- * 5) Set PHY address.
- * Note: Call this routine prior to eth_port_start routine and after
- * setting user values in the user fields of Ethernet port control
- * struct.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet port control struct
- *
- * OUTPUT:
- * See description.
- *
- * RETURN:
- * None.
- */
-static void eth_port_init(struct mv643xx_private *mp)
-{
- mp->rx_resource_err = 0;
+ /*
+ * Any TxEnd interrupts?
+ */
+ if (int_cause & INT_TX_END) {
+ int i;
+
+ wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_TX_END));
+ for (i = 0; i < 8; i++) {
+ struct tx_queue *txq = mp->txq + i;
+ if (txq->tx_desc_count && !((txq_active >> i) & 1))
+ txq_enable(txq);
+ }
+ }
- eth_port_reset(mp);
+ /*
+ * Enough space again in the primary TX queue for a full packet?
+ */
+ if (int_cause_ext & INT_EXT_TX) {
+ struct tx_queue *txq = mp->txq + mp->txq_primary;
+ __txq_maybe_wake(txq);
+ }
- eth_port_init_mac_tables(mp);
+ return IRQ_HANDLED;
}
-/*
- * eth_port_start - Start the Ethernet port activity.
- *
- * DESCRIPTION:
- * This routine prepares the Ethernet port for Rx and Tx activity:
- * 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
- * has been initialized a descriptor's ring (using
- * ether_init_tx_desc_ring for Tx and ether_init_rx_desc_ring for Rx)
- * 2. Initialize and enable the Ethernet configuration port by writing to
- * the port's configuration and command registers.
- * 3. Initialize and enable the SDMA by writing to the SDMA's
- * configuration and command registers. After completing these steps,
- * the ethernet port SDMA can starts to perform Rx and Tx activities.
- *
- * Note: Each Rx and Tx queue descriptor's list must be initialized prior
- * to calling this function (use ether_init_tx_desc_ring for Tx queues
- * and ether_init_rx_desc_ring for Rx queues).
- *
- * INPUT:
- * dev - a pointer to the required interface
- *
- * OUTPUT:
- * Ethernet port is ready to receive and transmit.
- *
- * RETURN:
- * None.
- */
-static void eth_port_start(struct net_device *dev)
+static void phy_reset(struct mv643xx_eth_private *mp)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- unsigned int port_num = mp->port_num;
- int tx_curr_desc, rx_curr_desc;
- u32 pscr;
- struct ethtool_cmd ethtool_cmd;
-
- /* Assignment of Tx CTRP of given queue */
- tx_curr_desc = mp->tx_curr_desc_q;
- wrl(mp, TX_CURRENT_QUEUE_DESC_PTR_0(port_num),
- (u32)((struct eth_tx_desc *)mp->tx_desc_dma + tx_curr_desc));
-
- /* Assignment of Rx CRDP of given queue */
- rx_curr_desc = mp->rx_curr_desc_q;
- wrl(mp, RX_CURRENT_QUEUE_DESC_PTR_0(port_num),
- (u32)((struct eth_rx_desc *)mp->rx_desc_dma + rx_curr_desc));
+ unsigned int data;
- /* Add the assigned Ethernet address to the port's address table */
- eth_port_uc_addr_set(mp, dev->dev_addr);
+ smi_reg_read(mp, mp->phy_addr, 0, &data);
+ data |= 0x8000;
+ smi_reg_write(mp, mp->phy_addr, 0, data);
- /* Assign port configuration and command. */
- wrl(mp, PORT_CONFIG_REG(port_num),
- PORT_CONFIG_DEFAULT_VALUE);
-
- wrl(mp, PORT_CONFIG_EXTEND_REG(port_num),
- PORT_CONFIG_EXTEND_DEFAULT_VALUE);
+ do {
+ udelay(1);
+ smi_reg_read(mp, mp->phy_addr, 0, &data);
+ } while (data & 0x8000);
+}
- pscr = rdl(mp, PORT_SERIAL_CONTROL_REG(port_num));
+static void port_start(struct mv643xx_eth_private *mp)
+{
+ u32 pscr;
+ int i;
+ /*
+ * Configure basic link parameters.
+ */
+ pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS);
- wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), pscr);
-
+ wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
DISABLE_AUTO_NEG_SPEED_GMII |
- DISABLE_AUTO_NEG_FOR_DUPLX |
- DO_NOT_FORCE_LINK_FAIL |
+ DISABLE_AUTO_NEG_FOR_DUPLEX |
+ DO_NOT_FORCE_LINK_FAIL |
SERIAL_PORT_CONTROL_RESERVED;
+ wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+ pscr |= SERIAL_PORT_ENABLE;
+ wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
- wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), pscr);
+ wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE);
- pscr |= SERIAL_PORT_ENABLE;
- wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), pscr);
+ /*
+ * Perform PHY reset, if there is a PHY.
+ */
+ if (mp->phy_addr != -1) {
+ struct ethtool_cmd cmd;
- /* Assign port SDMA configuration */
- wrl(mp, SDMA_CONFIG_REG(port_num),
- PORT_SDMA_CONFIG_DEFAULT_VALUE);
+ mv643xx_eth_get_settings(mp->dev, &cmd);
+ phy_reset(mp);
+ mv643xx_eth_set_settings(mp->dev, &cmd);
+ }
- /* Enable port Rx. */
- mv643xx_eth_port_enable_rx(mp, ETH_RX_QUEUES_ENABLED);
+ /*
+ * Configure TX path and queues.
+ */
+ tx_set_rate(mp, 1000000000, 16777216);
+ for (i = 0; i < 8; i++) {
+ struct tx_queue *txq = mp->txq + i;
+ int off = TXQ_CURRENT_DESC_PTR(mp->port_num, i);
+ u32 addr;
- /* Disable port bandwidth limits by clearing MTU register */
- wrl(mp, MAXIMUM_TRANSMIT_UNIT(port_num), 0);
+ if ((mp->txq_mask & (1 << i)) == 0)
+ continue;
- /* save phy settings across reset */
- mv643xx_get_settings(dev, &ethtool_cmd);
- ethernet_phy_reset(mp);
- mv643xx_set_settings(dev, &ethtool_cmd);
-}
+ addr = (u32)txq->tx_desc_dma;
+ addr += txq->tx_curr_desc * sizeof(struct tx_desc);
+ wrl(mp, off, addr);
-/*
- * eth_port_uc_addr_set - Write a MAC address into the port's hw registers
- */
-static void eth_port_uc_addr_set(struct mv643xx_private *mp,
- unsigned char *p_addr)
-{
- unsigned int port_num = mp->port_num;
- unsigned int mac_h;
- unsigned int mac_l;
- int table;
+ txq_set_rate(txq, 1000000000, 16777216);
+ txq_set_fixed_prio_mode(txq);
+ }
- mac_l = (p_addr[4] << 8) | (p_addr[5]);
- mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | (p_addr[2] << 8) |
- (p_addr[3] << 0);
+ /*
+ * Add configured unicast address to address filter table.
+ */
+ uc_addr_set(mp, mp->dev->dev_addr);
- wrl(mp, MAC_ADDR_LOW(port_num), mac_l);
- wrl(mp, MAC_ADDR_HIGH(port_num), mac_h);
+ /*
+ * Receive all unmatched unicast, TCP, UDP, BPDU and broadcast
+ * frames to RX queue #0.
+ */
+ wrl(mp, PORT_CONFIG(mp->port_num), 0x00000000);
- /* Accept frames with this address */
- table = DA_FILTER_UNICAST_TABLE_BASE(port_num);
- eth_port_set_filter_table_entry(mp, table, p_addr[5] & 0x0f);
-}
+ /*
+ * Treat BPDUs as normal multicasts, and disable partition mode.
+ */
+ wrl(mp, PORT_CONFIG_EXT(mp->port_num), 0x00000000);
-/*
- * eth_port_uc_addr_get - Read the MAC address from the port's hw registers
- */
-static void eth_port_uc_addr_get(struct mv643xx_private *mp,
- unsigned char *p_addr)
-{
- unsigned int port_num = mp->port_num;
- unsigned int mac_h;
- unsigned int mac_l;
+ /*
+ * Enable the receive queues.
+ */
+ for (i = 0; i < 8; i++) {
+ struct rx_queue *rxq = mp->rxq + i;
+ int off = RXQ_CURRENT_DESC_PTR(mp->port_num, i);
+ u32 addr;
+
+ if ((mp->rxq_mask & (1 << i)) == 0)
+ continue;
- mac_h = rdl(mp, MAC_ADDR_HIGH(port_num));
- mac_l = rdl(mp, MAC_ADDR_LOW(port_num));
+ addr = (u32)rxq->rx_desc_dma;
+ addr += rxq->rx_curr_desc * sizeof(struct rx_desc);
+ wrl(mp, off, addr);
- p_addr[0] = (mac_h >> 24) & 0xff;
- p_addr[1] = (mac_h >> 16) & 0xff;
- p_addr[2] = (mac_h >> 8) & 0xff;
- p_addr[3] = mac_h & 0xff;
- p_addr[4] = (mac_l >> 8) & 0xff;
- p_addr[5] = mac_l & 0xff;
+ rxq_enable(rxq);
+ }
}
-/*
- * The entries in each table are indexed by a hash of a packet's MAC
- * address. One bit in each entry determines whether the packet is
- * accepted. There are 4 entries (each 8 bits wide) in each register
- * of the table. The bits in each entry are defined as follows:
- * 0 Accept=1, Drop=0
- * 3-1 Queue (ETH_Q0=0)
- * 7-4 Reserved = 0;
- */
-static void eth_port_set_filter_table_entry(struct mv643xx_private *mp,
- int table, unsigned char entry)
+static void set_rx_coal(struct mv643xx_eth_private *mp, unsigned int delay)
{
- unsigned int table_reg;
- unsigned int tbl_offset;
- unsigned int reg_offset;
+ unsigned int coal = ((mp->shared->t_clk / 1000000) * delay) / 64;
+ u32 val;
+
+ val = rdl(mp, SDMA_CONFIG(mp->port_num));
+ if (mp->shared->extended_rx_coal_limit) {
+ if (coal > 0xffff)
+ coal = 0xffff;
+ val &= ~0x023fff80;
+ val |= (coal & 0x8000) << 10;
+ val |= (coal & 0x7fff) << 7;
+ } else {
+ if (coal > 0x3fff)
+ coal = 0x3fff;
+ val &= ~0x003fff00;
+ val |= (coal & 0x3fff) << 8;
+ }
+ wrl(mp, SDMA_CONFIG(mp->port_num), val);
+}
- tbl_offset = (entry / 4) * 4; /* Register offset of DA table entry */
- reg_offset = entry % 4; /* Entry offset within the register */
+static void set_tx_coal(struct mv643xx_eth_private *mp, unsigned int delay)
+{
+ unsigned int coal = ((mp->shared->t_clk / 1000000) * delay) / 64;
- /* Set "accepts frame bit" at specified table entry */
- table_reg = rdl(mp, table + tbl_offset);
- table_reg |= 0x01 << (8 * reg_offset);
- wrl(mp, table + tbl_offset, table_reg);
+ if (coal > 0x3fff)
+ coal = 0x3fff;
+ wrl(mp, TX_FIFO_URGENT_THRESHOLD(mp->port_num), (coal & 0x3fff) << 4);
}
-/*
- * eth_port_mc_addr - Multicast address settings.
- *
- * The MV device supports multicast using two tables:
- * 1) Special Multicast Table for MAC addresses of the form
- * 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_FF).
- * The MAC DA[7:0] bits are used as a pointer to the Special Multicast
- * Table entries in the DA-Filter table.
- * 2) Other Multicast Table for multicast of another type. A CRC-8bit
- * is used as an index to the Other Multicast Table entries in the
- * DA-Filter table. This function calculates the CRC-8bit value.
- * In either case, eth_port_set_filter_table_entry() is then called
- * to set to set the actual table entry.
- */
-static void eth_port_mc_addr(struct mv643xx_private *mp, unsigned char *p_addr)
+static int mv643xx_eth_open(struct net_device *dev)
{
- unsigned int port_num = mp->port_num;
- unsigned int mac_h;
- unsigned int mac_l;
- unsigned char crc_result = 0;
- int table;
- int mac_array[48];
- int crc[8];
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
+ int err;
int i;
- if ((p_addr[0] == 0x01) && (p_addr[1] == 0x00) &&
- (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) {
- table = DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port_num);
- eth_port_set_filter_table_entry(mp, table, p_addr[5]);
- return;
+ wrl(mp, INT_CAUSE(mp->port_num), 0);
+ wrl(mp, INT_CAUSE_EXT(mp->port_num), 0);
+ rdl(mp, INT_CAUSE_EXT(mp->port_num));
+
+ err = request_irq(dev->irq, mv643xx_eth_irq,
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+ dev->name, dev);
+ if (err) {
+ dev_printk(KERN_ERR, &dev->dev, "can't assign irq\n");
+ return -EAGAIN;
}
- /* Calculate CRC-8 out of the given address */
- mac_h = (p_addr[0] << 8) | (p_addr[1]);
- mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) |
- (p_addr[4] << 8) | (p_addr[5] << 0);
-
- for (i = 0; i < 32; i++)
- mac_array[i] = (mac_l >> i) & 0x1;
- for (i = 32; i < 48; i++)
- mac_array[i] = (mac_h >> (i - 32)) & 0x1;
-
- crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^ mac_array[39] ^
- mac_array[35] ^ mac_array[34] ^ mac_array[31] ^ mac_array[30] ^
- mac_array[28] ^ mac_array[23] ^ mac_array[21] ^ mac_array[19] ^
- mac_array[18] ^ mac_array[16] ^ mac_array[14] ^ mac_array[12] ^
- mac_array[8] ^ mac_array[7] ^ mac_array[6] ^ mac_array[0];
-
- crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ mac_array[43] ^
- mac_array[41] ^ mac_array[39] ^ mac_array[36] ^ mac_array[34] ^
- mac_array[32] ^ mac_array[30] ^ mac_array[29] ^ mac_array[28] ^
- mac_array[24] ^ mac_array[23] ^ mac_array[22] ^ mac_array[21] ^
- mac_array[20] ^ mac_array[18] ^ mac_array[17] ^ mac_array[16] ^
- mac_array[15] ^ mac_array[14] ^ mac_array[13] ^ mac_array[12] ^
- mac_array[9] ^ mac_array[6] ^ mac_array[1] ^ mac_array[0];
-
- crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^ mac_array[43] ^
- mac_array[42] ^ mac_array[39] ^ mac_array[37] ^ mac_array[34] ^
- mac_array[33] ^ mac_array[29] ^ mac_array[28] ^ mac_array[25] ^
- mac_array[24] ^ mac_array[22] ^ mac_array[17] ^ mac_array[15] ^
- mac_array[13] ^ mac_array[12] ^ mac_array[10] ^ mac_array[8] ^
- mac_array[6] ^ mac_array[2] ^ mac_array[1] ^ mac_array[0];
-
- crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^ mac_array[43] ^
- mac_array[40] ^ mac_array[38] ^ mac_array[35] ^ mac_array[34] ^
- mac_array[30] ^ mac_array[29] ^ mac_array[26] ^ mac_array[25] ^
- mac_array[23] ^ mac_array[18] ^ mac_array[16] ^ mac_array[14] ^
- mac_array[13] ^ mac_array[11] ^ mac_array[9] ^ mac_array[7] ^
- mac_array[3] ^ mac_array[2] ^ mac_array[1];
-
- crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ mac_array[41] ^
- mac_array[39] ^ mac_array[36] ^ mac_array[35] ^ mac_array[31] ^
- mac_array[30] ^ mac_array[27] ^ mac_array[26] ^ mac_array[24] ^
- mac_array[19] ^ mac_array[17] ^ mac_array[15] ^ mac_array[14] ^
- mac_array[12] ^ mac_array[10] ^ mac_array[8] ^ mac_array[4] ^
- mac_array[3] ^ mac_array[2];
-
- crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^ mac_array[42] ^
- mac_array[40] ^ mac_array[37] ^ mac_array[36] ^ mac_array[32] ^
- mac_array[31] ^ mac_array[28] ^ mac_array[27] ^ mac_array[25] ^
- mac_array[20] ^ mac_array[18] ^ mac_array[16] ^ mac_array[15] ^
- mac_array[13] ^ mac_array[11] ^ mac_array[9] ^ mac_array[5] ^
- mac_array[4] ^ mac_array[3];
-
- crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^ mac_array[41] ^
- mac_array[38] ^ mac_array[37] ^ mac_array[33] ^ mac_array[32] ^
- mac_array[29] ^ mac_array[28] ^ mac_array[26] ^ mac_array[21] ^
- mac_array[19] ^ mac_array[17] ^ mac_array[16] ^ mac_array[14] ^
- mac_array[12] ^ mac_array[10] ^ mac_array[6] ^ mac_array[5] ^
- mac_array[4];
-
- crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^ mac_array[39] ^
- mac_array[38] ^ mac_array[34] ^ mac_array[33] ^ mac_array[30] ^
- mac_array[29] ^ mac_array[27] ^ mac_array[22] ^ mac_array[20] ^
- mac_array[18] ^ mac_array[17] ^ mac_array[15] ^ mac_array[13] ^
- mac_array[11] ^ mac_array[7] ^ mac_array[6] ^ mac_array[5];
+ init_mac_tables(mp);
- for (i = 0; i < 8; i++)
- crc_result = crc_result | (crc[i] << i);
+ for (i = 0; i < 8; i++) {
+ if ((mp->rxq_mask & (1 << i)) == 0)
+ continue;
- table = DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port_num);
- eth_port_set_filter_table_entry(mp, table, crc_result);
-}
+ err = rxq_init(mp, i);
+ if (err) {
+ while (--i >= 0)
+ if (mp->rxq_mask & (1 << i))
+ rxq_deinit(mp->rxq + i);
+ goto out;
+ }
-/*
- * Set the entire multicast list based on dev->mc_list.
- */
-static void eth_port_set_multicast_list(struct net_device *dev)
-{
+ rxq_refill(mp->rxq + i);
+ }
- struct dev_mc_list *mc_list;
- int i;
- int table_index;
- struct mv643xx_private *mp = netdev_priv(dev);
- unsigned int eth_port_num = mp->port_num;
+ for (i = 0; i < 8; i++) {
+ if ((mp->txq_mask & (1 << i)) == 0)
+ continue;
- /* If the device is in promiscuous mode or in all multicast mode,
- * we will fully populate both multicast tables with accept.
- * This is guaranteed to yield a match on all multicast addresses...
- */
- if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI)) {
- for (table_index = 0; table_index <= 0xFC; table_index += 4) {
- /* Set all entries in DA filter special multicast
- * table (Ex_dFSMT)
- * Set for ETH_Q0 for now
- * Bits
- * 0 Accept=1, Drop=0
- * 3-1 Queue ETH_Q0=0
- * 7-4 Reserved = 0;
- */
- wrl(mp, DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
-
- /* Set all entries in DA filter other multicast
- * table (Ex_dFOMT)
- * Set for ETH_Q0 for now
- * Bits
- * 0 Accept=1, Drop=0
- * 3-1 Queue ETH_Q0=0
- * 7-4 Reserved = 0;
- */
- wrl(mp, DA_FILTER_OTHER_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
+ err = txq_init(mp, i);
+ if (err) {
+ while (--i >= 0)
+ if (mp->txq_mask & (1 << i))
+ txq_deinit(mp->txq + i);
+ goto out_free;
}
- return;
}
- /* We will clear out multicast tables every time we get the list.
- * Then add the entire new list...
- */
- for (table_index = 0; table_index <= 0xFC; table_index += 4) {
- /* Clear DA filter special multicast table (Ex_dFSMT) */
- wrl(mp, DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE
- (eth_port_num) + table_index, 0);
-
- /* Clear DA filter other multicast table (Ex_dFOMT) */
- wrl(mp, DA_FILTER_OTHER_MULTICAST_TABLE_BASE
- (eth_port_num) + table_index, 0);
- }
+#ifdef MV643XX_ETH_NAPI
+ napi_enable(&mp->napi);
+#endif
+
+ port_start(mp);
- /* Get pointer to net_device multicast list and add each one... */
- for (i = 0, mc_list = dev->mc_list;
- (i < 256) && (mc_list != NULL) && (i < dev->mc_count);
- i++, mc_list = mc_list->next)
- if (mc_list->dmi_addrlen == 6)
- eth_port_mc_addr(mp, mc_list->dmi_addr);
+ set_rx_coal(mp, 0);
+ set_tx_coal(mp, 0);
+
+ wrl(mp, INT_MASK_EXT(mp->port_num),
+ INT_EXT_LINK | INT_EXT_PHY | INT_EXT_TX);
+
+ wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_EXT);
+
+ return 0;
+
+
+out_free:
+ for (i = 0; i < 8; i++)
+ if (mp->rxq_mask & (1 << i))
+ rxq_deinit(mp->rxq + i);
+out:
+ free_irq(dev->irq, dev);
+
+ return err;
}
-/*
- * eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
- *
- * DESCRIPTION:
- * Go through all the DA filter tables (Unicast, Special Multicast &
- * Other Multicast) and set each entry to 0.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port.
- *
- * OUTPUT:
- * Multicast and Unicast packets are rejected.
- *
- * RETURN:
- * None.
- */
-static void eth_port_init_mac_tables(struct mv643xx_private *mp)
-{
- unsigned int port_num = mp->port_num;
- int table_index;
-
- /* Clear DA filter unicast table (Ex_dFUT) */
- for (table_index = 0; table_index <= 0xC; table_index += 4)
- wrl(mp, DA_FILTER_UNICAST_TABLE_BASE(port_num) +
- table_index, 0);
-
- for (table_index = 0; table_index <= 0xFC; table_index += 4) {
- /* Clear DA filter special multicast table (Ex_dFSMT) */
- wrl(mp, DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port_num) +
- table_index, 0);
- /* Clear DA filter other multicast table (Ex_dFOMT) */
- wrl(mp, DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port_num) +
- table_index, 0);
+static void port_reset(struct mv643xx_eth_private *mp)
+{
+ unsigned int data;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ if (mp->rxq_mask & (1 << i))
+ rxq_disable(mp->rxq + i);
+ if (mp->txq_mask & (1 << i))
+ txq_disable(mp->txq + i);
}
+ while (!(rdl(mp, PORT_STATUS(mp->port_num)) & TX_FIFO_EMPTY))
+ udelay(10);
+
+ /* Reset the Enable bit in the Configuration Register */
+ data = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
+ data &= ~(SERIAL_PORT_ENABLE |
+ DO_NOT_FORCE_LINK_FAIL |
+ FORCE_LINK_PASS);
+ wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), data);
}
-/*
- * eth_clear_mib_counters - Clear all MIB counters
- *
- * DESCRIPTION:
- * This function clears all MIB counters of a specific ethernet port.
- * A read from the MIB counter will reset the counter.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port.
- *
- * OUTPUT:
- * After reading all MIB counters, the counters resets.
- *
- * RETURN:
- * MIB counter value.
- *
- */
-static void eth_clear_mib_counters(struct mv643xx_private *mp)
+static int mv643xx_eth_stop(struct net_device *dev)
{
- unsigned int port_num = mp->port_num;
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
int i;
- /* Perform dummy reads from MIB counters */
- for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
- i += 4)
- rdl(mp, MIB_COUNTERS_BASE(port_num) + i);
+ wrl(mp, INT_MASK(mp->port_num), 0x00000000);
+ rdl(mp, INT_MASK(mp->port_num));
+
+#ifdef MV643XX_ETH_NAPI
+ napi_disable(&mp->napi);
+#endif
+ netif_carrier_off(dev);
+ netif_stop_queue(dev);
+
+ free_irq(dev->irq, dev);
+
+ port_reset(mp);
+ mib_counters_update(mp);
+
+ for (i = 0; i < 8; i++) {
+ if (mp->rxq_mask & (1 << i))
+ rxq_deinit(mp->rxq + i);
+ if (mp->txq_mask & (1 << i))
+ txq_deinit(mp->txq + i);
+ }
+
+ return 0;
}
-static inline u32 read_mib(struct mv643xx_private *mp, int offset)
+static int mv643xx_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
- return rdl(mp, MIB_COUNTERS_BASE(mp->port_num) + offset);
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
+
+ if (mp->phy_addr != -1)
+ return generic_mii_ioctl(&mp->mii, if_mii(ifr), cmd, NULL);
+
+ return -EOPNOTSUPP;
}
-static void eth_update_mib_counters(struct mv643xx_private *mp)
+static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu)
{
- struct mv643xx_mib_counters *p = &mp->mib_counters;
- int offset;
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
- p->good_octets_received +=
- read_mib(mp, ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
- p->good_octets_received +=
- (u64)read_mib(mp, ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32;
+ if (new_mtu < 64 || new_mtu > 9500)
+ return -EINVAL;
- for (offset = ETH_MIB_BAD_OCTETS_RECEIVED;
- offset <= ETH_MIB_FRAMES_1024_TO_MAX_OCTETS;
- offset += 4)
- *(u32 *)((char *)p + offset) += read_mib(mp, offset);
+ dev->mtu = new_mtu;
+ tx_set_rate(mp, 1000000000, 16777216);
- p->good_octets_sent += read_mib(mp, ETH_MIB_GOOD_OCTETS_SENT_LOW);
- p->good_octets_sent +=
- (u64)read_mib(mp, ETH_MIB_GOOD_OCTETS_SENT_HIGH) << 32;
+ if (!netif_running(dev))
+ return 0;
- for (offset = ETH_MIB_GOOD_FRAMES_SENT;
- offset <= ETH_MIB_LATE_COLLISION;
- offset += 4)
- *(u32 *)((char *)p + offset) += read_mib(mp, offset);
+ /*
+ * Stop and then re-open the interface. This will allocate RX
+ * skbs of the new MTU.
+ * There is a possible danger that the open will not succeed,
+ * due to memory being full.
+ */
+ mv643xx_eth_stop(dev);
+ if (mv643xx_eth_open(dev)) {
+ dev_printk(KERN_ERR, &dev->dev,
+ "fatal error on re-opening device after "
+ "MTU change\n");
+ }
+
+ return 0;
}
-/*
- * ethernet_phy_detect - Detect whether a phy is present
- *
- * DESCRIPTION:
- * This function tests whether there is a PHY present on
- * the specified port.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port.
- *
- * OUTPUT:
- * None
- *
- * RETURN:
- * 0 on success
- * -ENODEV on failure
- *
- */
-static int ethernet_phy_detect(struct mv643xx_private *mp)
+static void tx_timeout_task(struct work_struct *ugly)
{
- unsigned int phy_reg_data0;
- int auto_neg;
+ struct mv643xx_eth_private *mp;
- eth_port_read_smi_reg(mp, 0, &phy_reg_data0);
- auto_neg = phy_reg_data0 & 0x1000;
- phy_reg_data0 ^= 0x1000; /* invert auto_neg */
- eth_port_write_smi_reg(mp, 0, phy_reg_data0);
+ mp = container_of(ugly, struct mv643xx_eth_private, tx_timeout_task);
+ if (netif_running(mp->dev)) {
+ netif_stop_queue(mp->dev);
- eth_port_read_smi_reg(mp, 0, &phy_reg_data0);
- if ((phy_reg_data0 & 0x1000) == auto_neg)
- return -ENODEV; /* change didn't take */
+ port_reset(mp);
+ port_start(mp);
- phy_reg_data0 ^= 0x1000;
- eth_port_write_smi_reg(mp, 0, phy_reg_data0);
- return 0;
+ __txq_maybe_wake(mp->txq + mp->txq_primary);
+ }
}
-/*
- * ethernet_phy_get - Get the ethernet port PHY address.
- *
- * DESCRIPTION:
- * This routine returns the given ethernet port PHY address.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port.
- *
- * OUTPUT:
- * None.
- *
- * RETURN:
- * PHY address.
- *
- */
-static int ethernet_phy_get(struct mv643xx_private *mp)
+static void mv643xx_eth_tx_timeout(struct net_device *dev)
{
- unsigned int reg_data;
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
- reg_data = rdl(mp, PHY_ADDR_REG);
+ dev_printk(KERN_INFO, &dev->dev, "tx timeout\n");
- return ((reg_data >> (5 * mp->port_num)) & 0x1f);
+ schedule_work(&mp->tx_timeout_task);
}
-/*
- * ethernet_phy_set - Set the ethernet port PHY address.
- *
- * DESCRIPTION:
- * This routine sets the given ethernet port PHY address.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port.
- * int phy_addr PHY address.
- *
- * OUTPUT:
- * None.
- *
- * RETURN:
- * None.
- *
- */
-static void ethernet_phy_set(struct mv643xx_private *mp, int phy_addr)
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void mv643xx_eth_netpoll(struct net_device *dev)
{
- u32 reg_data;
- int addr_shift = 5 * mp->port_num;
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
+
+ wrl(mp, INT_MASK(mp->port_num), 0x00000000);
+ rdl(mp, INT_MASK(mp->port_num));
+
+ mv643xx_eth_irq(dev->irq, dev);
- reg_data = rdl(mp, PHY_ADDR_REG);
- reg_data &= ~(0x1f << addr_shift);
- reg_data |= (phy_addr & 0x1f) << addr_shift;
- wrl(mp, PHY_ADDR_REG, reg_data);
+ wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_CAUSE_EXT);
}
+#endif
-/*
- * ethernet_phy_reset - Reset Ethernet port PHY.
- *
- * DESCRIPTION:
- * This routine utilizes the SMI interface to reset the ethernet port PHY.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port.
- *
- * OUTPUT:
- * The PHY is reset.
- *
- * RETURN:
- * None.
- *
- */
-static void ethernet_phy_reset(struct mv643xx_private *mp)
+static int mv643xx_eth_mdio_read(struct net_device *dev, int addr, int reg)
{
- unsigned int phy_reg_data;
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
+ int val;
- /* Reset the PHY */
- eth_port_read_smi_reg(mp, 0, &phy_reg_data);
- phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
- eth_port_write_smi_reg(mp, 0, phy_reg_data);
+ smi_reg_read(mp, addr, reg, &val);
- /* wait for PHY to come out of reset */
- do {
- udelay(1);
- eth_port_read_smi_reg(mp, 0, &phy_reg_data);
- } while (phy_reg_data & 0x8000);
+ return val;
}
-static void mv643xx_eth_port_enable_tx(struct mv643xx_private *mp,
- unsigned int queues)
+static void mv643xx_eth_mdio_write(struct net_device *dev, int addr, int reg, int val)
{
- wrl(mp, TRANSMIT_QUEUE_COMMAND_REG(mp->port_num), queues);
+ struct mv643xx_eth_private *mp = netdev_priv(dev);
+ smi_reg_write(mp, addr, reg, val);
}
-static void mv643xx_eth_port_enable_rx(struct mv643xx_private *mp,
- unsigned int queues)
-{
- wrl(mp, RECEIVE_QUEUE_COMMAND_REG(mp->port_num), queues);
-}
-static unsigned int mv643xx_eth_port_disable_tx(struct mv643xx_private *mp)
+/* platform glue ************************************************************/
+static void
+mv643xx_eth_conf_mbus_windows(struct mv643xx_eth_shared_private *msp,
+ struct mbus_dram_target_info *dram)
{
- unsigned int port_num = mp->port_num;
- u32 queues;
+ void __iomem *base = msp->base;
+ u32 win_enable;
+ u32 win_protect;
+ int i;
- /* Stop Tx port activity. Check port Tx activity. */
- queues = rdl(mp, TRANSMIT_QUEUE_COMMAND_REG(port_num)) & 0xFF;
- if (queues) {
- /* Issue stop command for active queues only */
- wrl(mp, TRANSMIT_QUEUE_COMMAND_REG(port_num), (queues << 8));
+ for (i = 0; i < 6; i++) {
+ writel(0, base + WINDOW_BASE(i));
+ writel(0, base + WINDOW_SIZE(i));
+ if (i < 4)
+ writel(0, base + WINDOW_REMAP_HIGH(i));
+ }
- /* Wait for all Tx activity to terminate. */
- /* Check port cause register that all Tx queues are stopped */
- while (rdl(mp, TRANSMIT_QUEUE_COMMAND_REG(port_num)) & 0xFF)
- udelay(PHY_WAIT_MICRO_SECONDS);
+ win_enable = 0x3f;
+ win_protect = 0;
- /* Wait for Tx FIFO to empty */
- while (rdl(mp, PORT_STATUS_REG(port_num)) &
- ETH_PORT_TX_FIFO_EMPTY)
- udelay(PHY_WAIT_MICRO_SECONDS);
+ for (i = 0; i < dram->num_cs; i++) {
+ struct mbus_dram_window *cs = dram->cs + i;
+
+ writel((cs->base & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ dram->mbus_dram_target_id, base + WINDOW_BASE(i));
+ writel((cs->size - 1) & 0xffff0000, base + WINDOW_SIZE(i));
+
+ win_enable &= ~(1 << i);
+ win_protect |= 3 << (2 * i);
}
- return queues;
+ writel(win_enable, base + WINDOW_BAR_ENABLE);
+ msp->win_protect = win_protect;
}
-static unsigned int mv643xx_eth_port_disable_rx(struct mv643xx_private *mp)
+static void infer_hw_params(struct mv643xx_eth_shared_private *msp)
{
- unsigned int port_num = mp->port_num;
- u32 queues;
-
- /* Stop Rx port activity. Check port Rx activity. */
- queues = rdl(mp, RECEIVE_QUEUE_COMMAND_REG(port_num)) & 0xFF;
- if (queues) {
- /* Issue stop command for active queues only */
- wrl(mp, RECEIVE_QUEUE_COMMAND_REG(port_num), (queues << 8));
-
- /* Wait for all Rx activity to terminate. */
- /* Check port cause register that all Rx queues are stopped */
- while (rdl(mp, RECEIVE_QUEUE_COMMAND_REG(port_num)) & 0xFF)
- udelay(PHY_WAIT_MICRO_SECONDS);
- }
+ /*
+ * Check whether we have a 14-bit coal limit field in bits
+ * [21:8], or a 16-bit coal limit in bits [25,21:7] of the
+ * SDMA config register.
+ */
+ writel(0x02000000, msp->base + SDMA_CONFIG(0));
+ if (readl(msp->base + SDMA_CONFIG(0)) & 0x02000000)
+ msp->extended_rx_coal_limit = 1;
+ else
+ msp->extended_rx_coal_limit = 0;
- return queues;
+ /*
+ * Check whether the TX rate control registers are in the
+ * old or the new place.
+ */
+ writel(1, msp->base + TX_BW_MTU_MOVED(0));
+ if (readl(msp->base + TX_BW_MTU_MOVED(0)) & 1)
+ msp->tx_bw_control_moved = 1;
+ else
+ msp->tx_bw_control_moved = 0;
}
-/*
- * eth_port_reset - Reset Ethernet port
- *
- * DESCRIPTION:
- * This routine resets the chip by aborting any SDMA engine activity and
- * clearing the MIB counters. The Receiver and the Transmit unit are in
- * idle state after this command is performed and the port is disabled.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port.
- *
- * OUTPUT:
- * Channel activity is halted.
- *
- * RETURN:
- * None.
- *
- */
-static void eth_port_reset(struct mv643xx_private *mp)
+static int mv643xx_eth_shared_probe(struct platform_device *pdev)
{
- unsigned int port_num = mp->port_num;
- unsigned int reg_data;
+ static int mv643xx_eth_version_printed = 0;
+ struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data;
+ struct mv643xx_eth_shared_private *msp;
+ struct resource *res;
+ int ret;
- mv643xx_eth_port_disable_tx(mp);
- mv643xx_eth_port_disable_rx(mp);
+ if (!mv643xx_eth_version_printed++)
+ printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n");
- /* Clear all MIB counters */
- eth_clear_mib_counters(mp);
+ ret = -EINVAL;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ goto out;
- /* Reset the Enable bit in the Configuration Register */
- reg_data = rdl(mp, PORT_SERIAL_CONTROL_REG(port_num));
- reg_data &= ~(SERIAL_PORT_ENABLE |
- DO_NOT_FORCE_LINK_FAIL |
- FORCE_LINK_PASS);
- wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), reg_data);
-}
+ ret = -ENOMEM;
+ msp = kmalloc(sizeof(*msp), GFP_KERNEL);
+ if (msp == NULL)
+ goto out;
+ memset(msp, 0, sizeof(*msp));
+ msp->base = ioremap(res->start, res->end - res->start + 1);
+ if (msp->base == NULL)
+ goto out_free;
-/*
- * eth_port_read_smi_reg - Read PHY registers
- *
- * DESCRIPTION:
- * This routine utilize the SMI interface to interact with the PHY in
- * order to perform PHY register read.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port.
- * unsigned int phy_reg PHY register address offset.
- * unsigned int *value Register value buffer.
- *
- * OUTPUT:
- * Write the value of a specified PHY register into given buffer.
- *
- * RETURN:
- * false if the PHY is busy or read data is not in valid state.
- * true otherwise.
- *
- */
-static void eth_port_read_smi_reg(struct mv643xx_private *mp,
- unsigned int phy_reg, unsigned int *value)
-{
- void __iomem *smi_reg = mp->shared_smi->eth_base + SMI_REG;
- int phy_addr = ethernet_phy_get(mp);
- unsigned long flags;
- int i;
+ spin_lock_init(&msp->phy_lock);
- /* the SMI register is a shared resource */
- spin_lock_irqsave(&mp->shared_smi->phy_lock, flags);
+ /*
+ * (Re-)program MBUS remapping windows if we are asked to.
+ */
+ if (pd != NULL && pd->dram != NULL)
+ mv643xx_eth_conf_mbus_windows(msp, pd->dram);
- /* wait for the SMI register to become available */
- for (i = 0; readl(smi_reg) & ETH_SMI_BUSY; i++) {
- if (i == PHY_WAIT_ITERATIONS) {
- printk("%s: PHY busy timeout\n", mp->dev->name);
- goto out;
- }
- udelay(PHY_WAIT_MICRO_SECONDS);
- }
+ /*
+ * Detect hardware parameters.
+ */
+ msp->t_clk = (pd != NULL && pd->t_clk != 0) ? pd->t_clk : 133000000;
+ infer_hw_params(msp);
- writel((phy_addr << 16) | (phy_reg << 21) | ETH_SMI_OPCODE_READ,
- smi_reg);
+ platform_set_drvdata(pdev, msp);
- /* now wait for the data to be valid */
- for (i = 0; !(readl(smi_reg) & ETH_SMI_READ_VALID); i++) {
- if (i == PHY_WAIT_ITERATIONS) {
- printk("%s: PHY read timeout\n", mp->dev->name);
- goto out;
- }
- udelay(PHY_WAIT_MICRO_SECONDS);
- }
+ return 0;
- *value = readl(smi_reg) & 0xffff;
+out_free:
+ kfree(msp);
out:
- spin_unlock_irqrestore(&mp->shared_smi->phy_lock, flags);
+ return ret;
}
-/*
- * eth_port_write_smi_reg - Write to PHY registers
- *
- * DESCRIPTION:
- * This routine utilize the SMI interface to interact with the PHY in
- * order to perform writes to PHY registers.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port.
- * unsigned int phy_reg PHY register address offset.
- * unsigned int value Register value.
- *
- * OUTPUT:
- * Write the given value to the specified PHY register.
- *
- * RETURN:
- * false if the PHY is busy.
- * true otherwise.
- *
- */
-static void eth_port_write_smi_reg(struct mv643xx_private *mp,
- unsigned int phy_reg, unsigned int value)
+static int mv643xx_eth_shared_remove(struct platform_device *pdev)
{
- void __iomem *smi_reg = mp->shared_smi->eth_base + SMI_REG;
- int phy_addr = ethernet_phy_get(mp);
- unsigned long flags;
- int i;
-
- /* the SMI register is a shared resource */
- spin_lock_irqsave(&mp->shared_smi->phy_lock, flags);
+ struct mv643xx_eth_shared_private *msp = platform_get_drvdata(pdev);
- /* wait for the SMI register to become available */
- for (i = 0; readl(smi_reg) & ETH_SMI_BUSY; i++) {
- if (i == PHY_WAIT_ITERATIONS) {
- printk("%s: PHY busy timeout\n", mp->dev->name);
- goto out;
- }
- udelay(PHY_WAIT_MICRO_SECONDS);
- }
+ iounmap(msp->base);
+ kfree(msp);
- writel((phy_addr << 16) | (phy_reg << 21) |
- ETH_SMI_OPCODE_WRITE | (value & 0xffff), smi_reg);
-out:
- spin_unlock_irqrestore(&mp->shared_smi->phy_lock, flags);
+ return 0;
}
-/*
- * Wrappers for MII support library.
- */
-static int mv643xx_mdio_read(struct net_device *dev, int phy_id, int location)
+static struct platform_driver mv643xx_eth_shared_driver = {
+ .probe = mv643xx_eth_shared_probe,
+ .remove = mv643xx_eth_shared_remove,
+ .driver = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static void phy_addr_set(struct mv643xx_eth_private *mp, int phy_addr)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- int val;
+ int addr_shift = 5 * mp->port_num;
+ u32 data;
- eth_port_read_smi_reg(mp, location, &val);
- return val;
+ data = rdl(mp, PHY_ADDR);
+ data &= ~(0x1f << addr_shift);
+ data |= (phy_addr & 0x1f) << addr_shift;
+ wrl(mp, PHY_ADDR, data);
}
-static void mv643xx_mdio_write(struct net_device *dev, int phy_id, int location, int val)
+static int phy_addr_get(struct mv643xx_eth_private *mp)
{
- struct mv643xx_private *mp = netdev_priv(dev);
- eth_port_write_smi_reg(mp, location, val);
+ unsigned int data;
+
+ data = rdl(mp, PHY_ADDR);
+
+ return (data >> (5 * mp->port_num)) & 0x1f;
}
-/*
- * eth_port_receive - Get received information from Rx ring.
- *
- * DESCRIPTION:
- * This routine returns the received data to the caller. There is no
- * data copying during routine operation. All information is returned
- * using pointer to packet information struct passed from the caller.
- * If the routine exhausts Rx ring resources then the resource error flag
- * is set.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port Control srtuct.
- * struct pkt_info *p_pkt_info User packet buffer.
- *
- * OUTPUT:
- * Rx ring current and used indexes are updated.
- *
- * RETURN:
- * ETH_ERROR in case the routine can not access Rx desc ring.
- * ETH_QUEUE_FULL if Rx ring resources are exhausted.
- * ETH_END_OF_JOB if there is no received data.
- * ETH_OK otherwise.
- */
-static ETH_FUNC_RET_STATUS eth_port_receive(struct mv643xx_private *mp,
- struct pkt_info *p_pkt_info)
+static void set_params(struct mv643xx_eth_private *mp,
+ struct mv643xx_eth_platform_data *pd)
{
- int rx_next_curr_desc, rx_curr_desc, rx_used_desc;
- volatile struct eth_rx_desc *p_rx_desc;
- unsigned int command_status;
- unsigned long flags;
+ struct net_device *dev = mp->dev;
- /* Do not process Rx ring in case of Rx ring resource error */
- if (mp->rx_resource_err)
- return ETH_QUEUE_FULL;
+ if (is_valid_ether_addr(pd->mac_addr))
+ memcpy(dev->dev_addr, pd->mac_addr, 6);
+ else
+ uc_addr_get(mp, dev->dev_addr);
- spin_lock_irqsave(&mp->lock, flags);
+ if (pd->phy_addr == -1) {
+ mp->shared_smi = NULL;
+ mp->phy_addr = -1;
+ } else {
+ mp->shared_smi = mp->shared;
+ if (pd->shared_smi != NULL)
+ mp->shared_smi = platform_get_drvdata(pd->shared_smi);
- /* Get the Rx Desc ring 'curr and 'used' indexes */
- rx_curr_desc = mp->rx_curr_desc_q;
- rx_used_desc = mp->rx_used_desc_q;
+ if (pd->force_phy_addr || pd->phy_addr) {
+ mp->phy_addr = pd->phy_addr & 0x3f;
+ phy_addr_set(mp, mp->phy_addr);
+ } else {
+ mp->phy_addr = phy_addr_get(mp);
+ }
+ }
- p_rx_desc = &mp->p_rx_desc_area[rx_curr_desc];
+ mp->default_rx_ring_size = DEFAULT_RX_QUEUE_SIZE;
+ if (pd->rx_queue_size)
+ mp->default_rx_ring_size = pd->rx_queue_size;
+ mp->rx_desc_sram_addr = pd->rx_sram_addr;
+ mp->rx_desc_sram_size = pd->rx_sram_size;
- /* The following parameters are used to save readings from memory */
- command_status = p_rx_desc->cmd_sts;
- rmb();
+ if (pd->rx_queue_mask)
+ mp->rxq_mask = pd->rx_queue_mask;
+ else
+ mp->rxq_mask = 0x01;
+ mp->rxq_primary = fls(mp->rxq_mask) - 1;
- /* Nothing to receive... */
- if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
- spin_unlock_irqrestore(&mp->lock, flags);
- return ETH_END_OF_JOB;
- }
+ mp->default_tx_ring_size = DEFAULT_TX_QUEUE_SIZE;
+ if (pd->tx_queue_size)
+ mp->default_tx_ring_size = pd->tx_queue_size;
+ mp->tx_desc_sram_addr = pd->tx_sram_addr;
+ mp->tx_desc_sram_size = pd->tx_sram_size;
- p_pkt_info->byte_cnt = (p_rx_desc->byte_cnt) - RX_BUF_OFFSET;
- p_pkt_info->cmd_sts = command_status;
- p_pkt_info->buf_ptr = (p_rx_desc->buf_ptr) + RX_BUF_OFFSET;
- p_pkt_info->return_info = mp->rx_skb[rx_curr_desc];
- p_pkt_info->l4i_chk = p_rx_desc->buf_size;
+ if (pd->tx_queue_mask)
+ mp->txq_mask = pd->tx_queue_mask;
+ else
+ mp->txq_mask = 0x01;
+ mp->txq_primary = fls(mp->txq_mask) - 1;
+}
- /*
- * Clean the return info field to indicate that the
- * packet has been moved to the upper layers
- */
- mp->rx_skb[rx_curr_desc] = NULL;
+static int phy_detect(struct mv643xx_eth_private *mp)
+{
+ unsigned int data;
+ unsigned int data2;
- /* Update current index in data structure */
- rx_next_curr_desc = (rx_curr_desc + 1) % mp->rx_ring_size;
- mp->rx_curr_desc_q = rx_next_curr_desc;
+ smi_reg_read(mp, mp->phy_addr, 0, &data);
+ smi_reg_write(mp, mp->phy_addr, 0, data ^ 0x1000);
- /* Rx descriptors exhausted. Set the Rx ring resource error flag */
- if (rx_next_curr_desc == rx_used_desc)
- mp->rx_resource_err = 1;
+ smi_reg_read(mp, mp->phy_addr, 0, &data2);
+ if (((data ^ data2) & 0x1000) == 0)
+ return -ENODEV;
- spin_unlock_irqrestore(&mp->lock, flags);
+ smi_reg_write(mp, mp->phy_addr, 0, data);
- return ETH_OK;
+ return 0;
}
-/*
- * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
- *
- * DESCRIPTION:
- * This routine returns a Rx buffer back to the Rx ring. It retrieves the
- * next 'used' descriptor and attached the returned buffer to it.
- * In case the Rx ring was in "resource error" condition, where there are
- * no available Rx resources, the function resets the resource error flag.
- *
- * INPUT:
- * struct mv643xx_private *mp Ethernet Port Control srtuct.
- * struct pkt_info *p_pkt_info Information on returned buffer.
- *
- * OUTPUT:
- * New available Rx resource in Rx descriptor ring.
- *
- * RETURN:
- * ETH_ERROR in case the routine can not access Rx desc ring.
- * ETH_OK otherwise.
- */
-static ETH_FUNC_RET_STATUS eth_rx_return_buff(struct mv643xx_private *mp,
- struct pkt_info *p_pkt_info)
+static int phy_init(struct mv643xx_eth_private *mp,
+ struct mv643xx_eth_platform_data *pd)
{
- int used_rx_desc; /* Where to return Rx resource */
- volatile struct eth_rx_desc *p_used_rx_desc;
- unsigned long flags;
+ struct ethtool_cmd cmd;
+ int err;
- spin_lock_irqsave(&mp->lock, flags);
+ err = phy_detect(mp);
+ if (err) {
+ dev_printk(KERN_INFO, &mp->dev->dev,
+ "no PHY detected at addr %d\n", mp->phy_addr);
+ return err;
+ }
+ phy_reset(mp);
- /* Get 'used' Rx descriptor */
- used_rx_desc = mp->rx_used_desc_q;
- p_used_rx_desc = &mp->p_rx_desc_area[used_rx_desc];
+ mp->mii.phy_id = mp->phy_addr;
+ mp->mii.phy_id_mask = 0x3f;
+ mp->mii.reg_num_mask = 0x1f;
+ mp->mii.dev = mp->dev;
+ mp->mii.mdio_read = mv643xx_eth_mdio_read;
+ mp->mii.mdio_write = mv643xx_eth_mdio_write;
- p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
- p_used_rx_desc->buf_size = p_pkt_info->byte_cnt;
- mp->rx_skb[used_rx_desc] = p_pkt_info->return_info;
+ mp->mii.supports_gmii = mii_check_gmii_support(&mp->mii);
- /* Flush the write pipe */
+ memset(&cmd, 0, sizeof(cmd));
+
+ cmd.port = PORT_MII;
+ cmd.transceiver = XCVR_INTERNAL;
+ cmd.phy_address = mp->phy_addr;
+ if (pd->speed == 0) {
+ cmd.autoneg = AUTONEG_ENABLE;
+ cmd.speed = SPEED_100;
+ cmd.advertising = ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full;
+ if (mp->mii.supports_gmii)
+ cmd.advertising |= ADVERTISED_1000baseT_Full;
+ } else {
+ cmd.autoneg = AUTONEG_DISABLE;
+ cmd.speed = pd->speed;
+ cmd.duplex = pd->duplex;
+ }
- /* Return the descriptor to DMA ownership */
- wmb();
- p_used_rx_desc->cmd_sts =
- ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
- wmb();
+ update_pscr(mp, cmd.speed, cmd.duplex);
+ mv643xx_eth_set_settings(mp->dev, &cmd);
- /* Move the used descriptor pointer to the next descriptor */
- mp->rx_used_desc_q = (used_rx_desc + 1) % mp->rx_ring_size;
+ return 0;
+}
- /* Any Rx return cancels the Rx resource error status */
- mp->rx_resource_err = 0;
+static int mv643xx_eth_probe(struct platform_device *pdev)
+{
+ struct mv643xx_eth_platform_data *pd;
+ struct mv643xx_eth_private *mp;
+ struct net_device *dev;
+ struct resource *res;
+ DECLARE_MAC_BUF(mac);
+ int err;
- spin_unlock_irqrestore(&mp->lock, flags);
+ pd = pdev->dev.platform_data;
+ if (pd == NULL) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "no mv643xx_eth_platform_data\n");
+ return -ENODEV;
+ }
- return ETH_OK;
-}
+ if (pd->shared == NULL) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "no mv643xx_eth_platform_data->shared\n");
+ return -ENODEV;
+ }
-/************* Begin ethtool support *************************/
+ dev = alloc_etherdev(sizeof(struct mv643xx_eth_private));
+ if (!dev)
+ return -ENOMEM;
-struct mv643xx_stats {
- char stat_string[ETH_GSTRING_LEN];
- int sizeof_stat;
- int stat_offset;
-};
+ mp = netdev_priv(dev);
+ platform_set_drvdata(pdev, mp);
-#define MV643XX_STAT(m) FIELD_SIZEOF(struct mv643xx_private, m), \
- offsetof(struct mv643xx_private, m)
-
-static const struct mv643xx_stats mv643xx_gstrings_stats[] = {
- { "rx_packets", MV643XX_STAT(stats.rx_packets) },
- { "tx_packets", MV643XX_STAT(stats.tx_packets) },
- { "rx_bytes", MV643XX_STAT(stats.rx_bytes) },
- { "tx_bytes", MV643XX_STAT(stats.tx_bytes) },
- { "rx_errors", MV643XX_STAT(stats.rx_errors) },
- { "tx_errors", MV643XX_STAT(stats.tx_errors) },
- { "rx_dropped", MV643XX_STAT(stats.rx_dropped) },
- { "tx_dropped", MV643XX_STAT(stats.tx_dropped) },
- { "good_octets_received", MV643XX_STAT(mib_counters.good_octets_received) },
- { "bad_octets_received", MV643XX_STAT(mib_counters.bad_octets_received) },
- { "internal_mac_transmit_err", MV643XX_STAT(mib_counters.internal_mac_transmit_err) },
- { "good_frames_received", MV643XX_STAT(mib_counters.good_frames_received) },
- { "bad_frames_received", MV643XX_STAT(mib_counters.bad_frames_received) },
- { "broadcast_frames_received", MV643XX_STAT(mib_counters.broadcast_frames_received) },
- { "multicast_frames_received", MV643XX_STAT(mib_counters.multicast_frames_received) },
- { "frames_64_octets", MV643XX_STAT(mib_counters.frames_64_octets) },
- { "frames_65_to_127_octets", MV643XX_STAT(mib_counters.frames_65_to_127_octets) },
- { "frames_128_to_255_octets", MV643XX_STAT(mib_counters.frames_128_to_255_octets) },
- { "frames_256_to_511_octets", MV643XX_STAT(mib_counters.frames_256_to_511_octets) },
- { "frames_512_to_1023_octets", MV643XX_STAT(mib_counters.frames_512_to_1023_octets) },
- { "frames_1024_to_max_octets", MV643XX_STAT(mib_counters.frames_1024_to_max_octets) },
- { "good_octets_sent", MV643XX_STAT(mib_counters.good_octets_sent) },
- { "good_frames_sent", MV643XX_STAT(mib_counters.good_frames_sent) },
- { "excessive_collision", MV643XX_STAT(mib_counters.excessive_collision) },
- { "multicast_frames_sent", MV643XX_STAT(mib_counters.multicast_frames_sent) },
- { "broadcast_frames_sent", MV643XX_STAT(mib_counters.broadcast_frames_sent) },
- { "unrec_mac_control_received", MV643XX_STAT(mib_counters.unrec_mac_control_received) },
- { "fc_sent", MV643XX_STAT(mib_counters.fc_sent) },
- { "good_fc_received", MV643XX_STAT(mib_counters.good_fc_received) },
- { "bad_fc_received", MV643XX_STAT(mib_counters.bad_fc_received) },
- { "undersize_received", MV643XX_STAT(mib_counters.undersize_received) },
- { "fragments_received", MV643XX_STAT(mib_counters.fragments_received) },
- { "oversize_received", MV643XX_STAT(mib_counters.oversize_received) },
- { "jabber_received", MV643XX_STAT(mib_counters.jabber_received) },
- { "mac_receive_error", MV643XX_STAT(mib_counters.mac_receive_error) },
- { "bad_crc_event", MV643XX_STAT(mib_counters.bad_crc_event) },
- { "collision", MV643XX_STAT(mib_counters.collision) },
- { "late_collision", MV643XX_STAT(mib_counters.late_collision) },
-};
+ mp->shared = platform_get_drvdata(pd->shared);
+ mp->port_num = pd->port_number;
-#define MV643XX_STATS_LEN ARRAY_SIZE(mv643xx_gstrings_stats)
+ mp->dev = dev;
+#ifdef MV643XX_ETH_NAPI
+ netif_napi_add(dev, &mp->napi, mv643xx_eth_poll, 64);
+#endif
-static void mv643xx_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
-{
- strncpy(drvinfo->driver, mv643xx_driver_name, 32);
- strncpy(drvinfo->version, mv643xx_driver_version, 32);
- strncpy(drvinfo->fw_version, "N/A", 32);
- strncpy(drvinfo->bus_info, "mv643xx", 32);
- drvinfo->n_stats = MV643XX_STATS_LEN;
-}
+ set_params(mp, pd);
-static int mv643xx_get_sset_count(struct net_device *netdev, int sset)
-{
- switch (sset) {
- case ETH_SS_STATS:
- return MV643XX_STATS_LEN;
- default:
- return -EOPNOTSUPP;
- }
-}
+ spin_lock_init(&mp->lock);
-static void mv643xx_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, uint64_t *data)
-{
- struct mv643xx_private *mp = netdev->priv;
- int i;
+ mib_counters_clear(mp);
+ INIT_WORK(&mp->tx_timeout_task, tx_timeout_task);
- eth_update_mib_counters(mp);
+ if (mp->phy_addr != -1) {
+ err = phy_init(mp, pd);
+ if (err)
+ goto out;
- for (i = 0; i < MV643XX_STATS_LEN; i++) {
- char *p = (char *)mp+mv643xx_gstrings_stats[i].stat_offset;
- data[i] = (mv643xx_gstrings_stats[i].sizeof_stat ==
- sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
+ SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops);
+ } else {
+ SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops_phyless);
}
-}
-static void mv643xx_get_strings(struct net_device *netdev, uint32_t stringset,
- uint8_t *data)
-{
- int i;
- switch(stringset) {
- case ETH_SS_STATS:
- for (i=0; i < MV643XX_STATS_LEN; i++) {
- memcpy(data + i * ETH_GSTRING_LEN,
- mv643xx_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
- }
- break;
- }
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ BUG_ON(!res);
+ dev->irq = res->start;
+
+ dev->hard_start_xmit = mv643xx_eth_xmit;
+ dev->open = mv643xx_eth_open;
+ dev->stop = mv643xx_eth_stop;
+ dev->set_multicast_list = mv643xx_eth_set_rx_mode;
+ dev->set_mac_address = mv643xx_eth_set_mac_address;
+ dev->do_ioctl = mv643xx_eth_ioctl;
+ dev->change_mtu = mv643xx_eth_change_mtu;
+ dev->tx_timeout = mv643xx_eth_tx_timeout;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = mv643xx_eth_netpoll;
+#endif
+ dev->watchdog_timeo = 2 * HZ;
+ dev->base_addr = 0;
+
+#ifdef MV643XX_ETH_CHECKSUM_OFFLOAD_TX
+ /*
+ * Zero copy can only work if we use Discovery II memory. Else, we will
+ * have to map the buffers to ISA memory which is only 16 MB
+ */
+ dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
+#endif
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (mp->shared->win_protect)
+ wrl(mp, WINDOW_PROTECT(mp->port_num), mp->shared->win_protect);
+
+ err = register_netdev(dev);
+ if (err)
+ goto out;
+
+ dev_printk(KERN_NOTICE, &dev->dev, "port %d with MAC address %s\n",
+ mp->port_num, print_mac(mac, dev->dev_addr));
+
+ if (dev->features & NETIF_F_SG)
+ dev_printk(KERN_NOTICE, &dev->dev, "scatter/gather enabled\n");
+
+ if (dev->features & NETIF_F_IP_CSUM)
+ dev_printk(KERN_NOTICE, &dev->dev, "tx checksum offload\n");
+
+#ifdef MV643XX_ETH_NAPI
+ dev_printk(KERN_NOTICE, &dev->dev, "napi enabled\n");
+#endif
+
+ if (mp->tx_desc_sram_size > 0)
+ dev_printk(KERN_NOTICE, &dev->dev, "configured with sram\n");
+
+ return 0;
+
+out:
+ free_netdev(dev);
+
+ return err;
}
-static u32 mv643xx_eth_get_link(struct net_device *dev)
+static int mv643xx_eth_remove(struct platform_device *pdev)
{
- struct mv643xx_private *mp = netdev_priv(dev);
+ struct mv643xx_eth_private *mp = platform_get_drvdata(pdev);
- return mii_link_ok(&mp->mii);
+ unregister_netdev(mp->dev);
+ flush_scheduled_work();
+ free_netdev(mp->dev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
}
-static int mv643xx_eth_nway_restart(struct net_device *dev)
+static void mv643xx_eth_shutdown(struct platform_device *pdev)
{
- struct mv643xx_private *mp = netdev_priv(dev);
+ struct mv643xx_eth_private *mp = platform_get_drvdata(pdev);
- return mii_nway_restart(&mp->mii);
+ /* Mask all interrupts on ethernet port */
+ wrl(mp, INT_MASK(mp->port_num), 0);
+ rdl(mp, INT_MASK(mp->port_num));
+
+ if (netif_running(mp->dev))
+ port_reset(mp);
}
-static int mv643xx_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+static struct platform_driver mv643xx_eth_driver = {
+ .probe = mv643xx_eth_probe,
+ .remove = mv643xx_eth_remove,
+ .shutdown = mv643xx_eth_shutdown,
+ .driver = {
+ .name = MV643XX_ETH_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init mv643xx_eth_init_module(void)
{
- struct mv643xx_private *mp = netdev_priv(dev);
+ int rc;
+
+ rc = platform_driver_register(&mv643xx_eth_shared_driver);
+ if (!rc) {
+ rc = platform_driver_register(&mv643xx_eth_driver);
+ if (rc)
+ platform_driver_unregister(&mv643xx_eth_shared_driver);
+ }
- return generic_mii_ioctl(&mp->mii, if_mii(ifr), cmd, NULL);
+ return rc;
}
+module_init(mv643xx_eth_init_module);
-static const struct ethtool_ops mv643xx_ethtool_ops = {
- .get_settings = mv643xx_get_settings,
- .set_settings = mv643xx_set_settings,
- .get_drvinfo = mv643xx_get_drvinfo,
- .get_link = mv643xx_eth_get_link,
- .set_sg = ethtool_op_set_sg,
- .get_sset_count = mv643xx_get_sset_count,
- .get_ethtool_stats = mv643xx_get_ethtool_stats,
- .get_strings = mv643xx_get_strings,
- .nway_reset = mv643xx_eth_nway_restart,
-};
+static void __exit mv643xx_eth_cleanup_module(void)
+{
+ platform_driver_unregister(&mv643xx_eth_driver);
+ platform_driver_unregister(&mv643xx_eth_shared_driver);
+}
+module_exit(mv643xx_eth_cleanup_module);
-/************* End ethtool support *************************/
+MODULE_AUTHOR("Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, "
+ "Manish Lachwani, Dale Farnsworth and Lennert Buytenhek");
+MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MV643XX_ETH_SHARED_NAME);
+MODULE_ALIAS("platform:" MV643XX_ETH_NAME);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7f1cfc48e1b..64b7effe49d 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -51,7 +51,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.21"
+#define DRV_VERSION "1.22"
#define PFX DRV_NAME " "
/*
@@ -98,7 +98,7 @@ static int disable_msi = 0;
module_param(disable_msi, int, 0);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-static const struct pci_device_id sky2_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
@@ -136,6 +136,7 @@ static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
{ 0 }
};
@@ -146,17 +147,6 @@ static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
-/* This driver supports yukon2 chipset only */
-static const char *yukon2_name[] = {
- "XL", /* 0xb3 */
- "EC Ultra", /* 0xb4 */
- "Extreme", /* 0xb5 */
- "EC", /* 0xb6 */
- "FE", /* 0xb7 */
- "FE+", /* 0xb8 */
- "Supreme", /* 0xb9 */
-};
-
static void sky2_set_multicast(struct net_device *dev);
/* Access to PHY via serial interconnect */
@@ -658,8 +648,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
}
- if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
- hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) {
/* apply fixes in PHY AFE */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
@@ -667,9 +656,11 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
gm_phy_write(hw, port, 0x18, 0xaa99);
gm_phy_write(hw, port, 0x17, 0x2011);
- /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
- gm_phy_write(hw, port, 0x18, 0xa204);
- gm_phy_write(hw, port, 0x17, 0x2002);
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
+ gm_phy_write(hw, port, 0x18, 0xa204);
+ gm_phy_write(hw, port, 0x17, 0x2002);
+ }
/* set page register to 0 */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
@@ -678,7 +669,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
/* apply workaround for integrated resistors calibration */
gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
- } else if (hw->chip_id != CHIP_ID_YUKON_EX) {
+ } else if (hw->chip_id != CHIP_ID_YUKON_EX &&
+ hw->chip_id < CHIP_ID_YUKON_SUPR) {
/* no effect on Yukon-XL */
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
@@ -2818,6 +2810,7 @@ static u32 sky2_mhz(const struct sky2_hw *hw)
case CHIP_ID_YUKON_EC_U:
case CHIP_ID_YUKON_EX:
case CHIP_ID_YUKON_SUPR:
+ case CHIP_ID_YUKON_UL_2:
return 125;
case CHIP_ID_YUKON_FE:
@@ -2910,6 +2903,11 @@ static int __devinit sky2_init(struct sky2_hw *hw)
| SKY2_HW_ADV_POWER_CTL;
break;
+ case CHIP_ID_YUKON_UL_2:
+ hw->flags = SKY2_HW_GIGABIT
+ | SKY2_HW_ADV_POWER_CTL;
+ break;
+
default:
dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
hw->chip_id);
@@ -4265,12 +4263,34 @@ static int __devinit pci_wake_enabled(struct pci_dev *dev)
return value & PCI_PM_CTRL_PME_ENABLE;
}
+/* This driver supports yukon2 chipset only */
+static const char *sky2_name(u8 chipid, char *buf, int sz)
+{
+ const char *name[] = {
+ "XL", /* 0xb3 */
+ "EC Ultra", /* 0xb4 */
+ "Extreme", /* 0xb5 */
+ "EC", /* 0xb6 */
+ "FE", /* 0xb7 */
+ "FE+", /* 0xb8 */
+ "Supreme", /* 0xb9 */
+ "UL 2", /* 0xba */
+ };
+
+ if (chipid >= CHIP_ID_YUKON_XL && chipid < CHIP_ID_YUKON_UL_2)
+ strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
+ else
+ snprintf(buf, sz, "(chip %#x)", chipid);
+ return buf;
+}
+
static int __devinit sky2_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct net_device *dev;
struct sky2_hw *hw;
int err, using_dac = 0, wol_default;
+ char buf1[16];
err = pci_enable_device(pdev);
if (err) {
@@ -4341,10 +4361,10 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
if (err)
goto err_out_iounmap;
- dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
- DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
- pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
- hw->chip_id, hw->chip_rev);
+ dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-2 %s rev %d\n",
+ DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
+ pdev->irq, sky2_name(hw->chip_id, buf1, sizeof(buf1)),
+ hw->chip_rev);
sky2_reset(hw);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 1fa82bf029d..4d9c4a19bb8 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -441,6 +441,7 @@ enum {
CHIP_ID_YUKON_FE = 0xb7, /* YUKON-2 FE */
CHIP_ID_YUKON_FE_P = 0xb8, /* YUKON-2 FE+ */
CHIP_ID_YUKON_SUPR = 0xb9, /* YUKON-2 Supreme */
+ CHIP_ID_YUKON_UL_2 = 0xba, /* YUKON-2 Ultra 2 */
};
enum yukon_ec_rev {
CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */
diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h
index a15cdd4a8e5..12078577aef 100644
--- a/include/linux/mv643xx_eth.h
+++ b/include/linux/mv643xx_eth.h
@@ -17,30 +17,59 @@
struct mv643xx_eth_shared_platform_data {
struct mbus_dram_target_info *dram;
- unsigned int t_clk;
+ unsigned int t_clk;
};
struct mv643xx_eth_platform_data {
+ /*
+ * Pointer back to our parent instance, and our port number.
+ */
struct platform_device *shared;
- int port_number;
+ int port_number;
+ /*
+ * Whether a PHY is present, and if yes, at which address.
+ */
struct platform_device *shared_smi;
+ int force_phy_addr;
+ int phy_addr;
- u16 force_phy_addr; /* force override if phy_addr == 0 */
- u16 phy_addr;
-
- /* If speed is 0, then speed and duplex are autonegotiated. */
- int speed; /* 0, SPEED_10, SPEED_100, SPEED_1000 */
- int duplex; /* DUPLEX_HALF or DUPLEX_FULL */
-
- /* non-zero values of the following fields override defaults */
- u32 tx_queue_size;
- u32 rx_queue_size;
- u32 tx_sram_addr;
- u32 tx_sram_size;
- u32 rx_sram_addr;
- u32 rx_sram_size;
- u8 mac_addr[6]; /* mac address if non-zero*/
+ /*
+ * Use this MAC address if it is valid, overriding the
+ * address that is already in the hardware.
+ */
+ u8 mac_addr[6];
+
+ /*
+ * If speed is 0, autonegotiation is enabled.
+ * Valid values for speed: 0, SPEED_10, SPEED_100, SPEED_1000.
+ * Valid values for duplex: DUPLEX_HALF, DUPLEX_FULL.
+ */
+ int speed;
+ int duplex;
+
+ /*
+ * Which RX/TX queues to use.
+ */
+ int rx_queue_mask;
+ int tx_queue_mask;
+
+ /*
+ * Override default RX/TX queue sizes if nonzero.
+ */
+ int rx_queue_size;
+ int tx_queue_size;
+
+ /*
+ * Use on-chip SRAM for RX/TX descriptors if size is nonzero
+ * and sufficient to contain all descriptors for the requested
+ * ring sizes.
+ */
+ unsigned long rx_sram_addr;
+ int rx_sram_size;
+ unsigned long tx_sram_addr;
+ int tx_sram_size;
};
-#endif /* __LINUX_MV643XX_ETH_H */
+
+#endif
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 06d8ea5992d..4bf613cd9e2 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1479,6 +1479,7 @@ extern void __dev_addr_unsync(struct dev_addr_list **to, int *to_count, struct
extern void dev_set_promiscuity(struct net_device *dev, int inc);
extern void dev_set_allmulti(struct net_device *dev, int inc);
extern void netdev_state_change(struct net_device *dev);
+extern void netdev_bonding_change(struct net_device *dev);
extern void netdev_features_change(struct net_device *dev);
/* Load a device via the kmod */
extern void dev_load(struct net *net, const char *name);
@@ -1505,6 +1506,9 @@ extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos);
extern void dev_seq_stop(struct seq_file *seq, void *v);
#endif
+extern int netdev_class_create_file(struct class_attribute *class_attr);
+extern void netdev_class_remove_file(struct class_attribute *class_attr);
+
extern void linkwatch_run_queue(void);
extern int netdev_compute_features(unsigned long all, unsigned long one);
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index 0ff6224d172..bd3d72ddf33 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -197,6 +197,7 @@ static inline int notifier_to_errno(int ret)
#define NETDEV_GOING_DOWN 0x0009
#define NETDEV_CHANGENAME 0x000A
#define NETDEV_FEAT_CHANGE 0x000B
+#define NETDEV_BONDING_FAILOVER 0x000C
#define SYS_DOWN 0x0001 /* Notify of system down */
#define SYS_RESTART SYS_DOWN
diff --git a/net/core/dev.c b/net/core/dev.c
index 68d8df0992a..0e45742e715 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -961,6 +961,12 @@ void netdev_state_change(struct net_device *dev)
}
}
+void netdev_bonding_change(struct net_device *dev)
+{
+ call_netdevice_notifiers(NETDEV_BONDING_FAILOVER, dev);
+}
+EXPORT_SYMBOL(netdev_bonding_change);
+
/**
* dev_load - load a network module
* @net: the applicable net namespace
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index dccd737ea2e..3f794131921 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -468,6 +468,19 @@ int netdev_register_kobject(struct net_device *net)
return device_add(dev);
}
+int netdev_class_create_file(struct class_attribute *class_attr)
+{
+ return class_create_file(&net_class, class_attr);
+}
+
+void netdev_class_remove_file(struct class_attribute *class_attr)
+{
+ class_remove_file(&net_class, class_attr);
+}
+
+EXPORT_SYMBOL(netdev_class_create_file);
+EXPORT_SYMBOL(netdev_class_remove_file);
+
void netdev_initialize_kobject(struct net_device *net)
{
struct device *device = &(net->dev);