aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJames Bottomley <James.Bottomley@HansenPartnership.com>2008-01-03 12:27:16 -0600
committerJames Bottomley <James.Bottomley@HansenPartnership.com>2008-02-07 18:02:42 -0600
commit642978beb48331db1bafde0262eee33f658cfc39 (patch)
tree92305bcbd3aabce5d314bb0621ca602979965b42
parentda19d2f53269210adfa9aa5a163a9fad8dc63d27 (diff)
[SCSI] remove m68k NCR53C9x based drivers
These drivers depend on the deprecated NCR53C9X core and need to be converted to the esp_scsi core. Acked-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Linux/m68k <linux-m68k@vger.kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-rw-r--r--drivers/scsi/Kconfig60
-rw-r--r--drivers/scsi/Makefile7
-rw-r--r--drivers/scsi/blz1230.c353
-rw-r--r--drivers/scsi/blz2060.c306
-rw-r--r--drivers/scsi/cyberstorm.c377
-rw-r--r--drivers/scsi/cyberstormII.c314
-rw-r--r--drivers/scsi/fastlane.c421
-rw-r--r--drivers/scsi/mac_esp.c751
-rw-r--r--drivers/scsi/oktagon_esp.c606
-rw-r--r--drivers/scsi/oktagon_io.S194
10 files changed, 0 insertions, 3389 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 9680f82b3ec..510bedb3757 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1578,45 +1578,6 @@ config GVP11_SCSI
To compile this driver as a module, choose M here: the
module will be called gvp11.
-config CYBERSTORM_SCSI
- tristate "CyberStorm SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga with an original (MkI) Phase5 Cyberstorm
- accelerator board and the optional Cyberstorm SCSI controller,
- answer Y. Otherwise, say N.
-
-config CYBERSTORMII_SCSI
- tristate "CyberStorm Mk II SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
- and the optional Cyberstorm SCSI controller, say Y. Otherwise,
- answer N.
-
-config BLZ2060_SCSI
- tristate "Blizzard 2060 SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
- and want to use the onboard SCSI controller, say Y. Otherwise,
- answer N.
-
-config BLZ1230_SCSI
- tristate "Blizzard 1230IV/1260 SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
- 1260 accelerator, and the optional SCSI module, say Y. Otherwise,
- say N.
-
-config FASTLANE_SCSI
- tristate "Fastlane SCSI support"
- depends on ZORRO && SCSI
- help
- If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
- one in the near future, say Y to this question. Otherwise, say N.
-
config SCSI_A4000T
tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)"
depends on AMIGA && SCSI && EXPERIMENTAL
@@ -1644,15 +1605,6 @@ config SCSI_ZORRO7XX
accelerator card for the Amiga 1200,
- the SCSI controller on the GVP Turbo 040/060 accelerator.
-config OKTAGON_SCSI
- tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
- depends on ZORRO && SCSI && EXPERIMENTAL
- help
- If you have the BSC Oktagon SCSI disk controller for the Amiga, say
- Y to this question. If you're in doubt about whether you have one,
- see the picture at
- <http://amiga.resource.cx/exp/search.pl?product=oktagon>.
-
config ATARI_SCSI
tristate "Atari native SCSI support"
depends on ATARI && SCSI
@@ -1705,18 +1657,6 @@ config MAC_SCSI
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
-config SCSI_MAC_ESP
- tristate "Macintosh NCR53c9[46] SCSI"
- depends on MAC && SCSI
- help
- This is the NCR 53c9x SCSI controller found on most of the 68040
- based Macintoshes. If you have one of these say Y and read the
- SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called mac_esp.
-
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
depends on MVME147 && SCSI=y
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 576cfc68d46..118dc525e26 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -44,15 +44,8 @@ obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
-obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o
-obj-$(CONFIG_CYBERSTORMII_SCSI) += NCR53C9x.o cyberstormII.o
-obj-$(CONFIG_BLZ2060_SCSI) += NCR53C9x.o blz2060.o
-obj-$(CONFIG_BLZ1230_SCSI) += NCR53C9x.o blz1230.o
-obj-$(CONFIG_FASTLANE_SCSI) += NCR53C9x.o fastlane.o
-obj-$(CONFIG_OKTAGON_SCSI) += NCR53C9x.o oktagon_esp_mod.o
obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o
obj-$(CONFIG_MAC_SCSI) += mac_scsi.o
-obj-$(CONFIG_SCSI_MAC_ESP) += mac_esp.o NCR53C9x.o
obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o
obj-$(CONFIG_MVME16x_SCSI) += 53c700.o mvme16x_scsi.o
obj-$(CONFIG_BVME6000_SCSI) += 53c700.o bvme6000_scsi.o
diff --git a/drivers/scsi/blz1230.c b/drivers/scsi/blz1230.c
deleted file mode 100644
index 23f7c24ab80..00000000000
--- a/drivers/scsi/blz1230.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/* blz1230.c: Driver for Blizzard 1230 SCSI IV Controller.
- *
- * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
- *
- * This driver is based on the CyberStorm driver, hence the occasional
- * reference to CyberStorm.
- */
-
-/* TODO:
- *
- * 1) Figure out how to make a cleaner merge with the sparc driver with regard
- * to the caches and the Sparc MMU mapping.
- * 2) Make as few routines required outside the generic driver. A lot of the
- * routines in this file used to be inline!
- */
-
-#include <linux/module.h>
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/interrupt.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "NCR53C9x.h"
-
-#include <linux/zorro.h>
-#include <asm/irq.h>
-#include <asm/amigaints.h>
-#include <asm/amigahw.h>
-
-#include <asm/pgtable.h>
-
-#define MKIV 1
-
-/* The controller registers can be found in the Z2 config area at these
- * offsets:
- */
-#define BLZ1230_ESP_ADDR 0x8000
-#define BLZ1230_DMA_ADDR 0x10000
-#define BLZ1230II_ESP_ADDR 0x10000
-#define BLZ1230II_DMA_ADDR 0x10021
-
-
-/* The Blizzard 1230 DMA interface
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * Only two things can be programmed in the Blizzard DMA:
- * 1) The data direction is controlled by the status of bit 31 (1 = write)
- * 2) The source/dest address (word aligned, shifted one right) in bits 30-0
- *
- * Program DMA by first latching the highest byte of the address/direction
- * (i.e. bits 31-24 of the long word constructed as described in steps 1+2
- * above). Then write each byte of the address/direction (starting with the
- * top byte, working down) to the DMA address register.
- *
- * Figure out interrupt status by reading the ESP status byte.
- */
-struct blz1230_dma_registers {
- volatile unsigned char dma_addr; /* DMA address [0x0000] */
- unsigned char dmapad2[0x7fff];
- volatile unsigned char dma_latch; /* DMA latch [0x8000] */
-};
-
-struct blz1230II_dma_registers {
- volatile unsigned char dma_addr; /* DMA address [0x0000] */
- unsigned char dmapad2[0xf];
- volatile unsigned char dma_latch; /* DMA latch [0x0010] */
-};
-
-#define BLZ1230_DMA_WRITE 0x80000000
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-/***************************************************************** Detection */
-int __init blz1230_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- struct zorro_dev *z = NULL;
- unsigned long address;
- struct ESP_regs *eregs;
- unsigned long board;
-
-#if MKIV
-#define REAL_BLZ1230_ID ZORRO_PROD_PHASE5_BLIZZARD_1230_IV_1260
-#define REAL_BLZ1230_ESP_ADDR BLZ1230_ESP_ADDR
-#define REAL_BLZ1230_DMA_ADDR BLZ1230_DMA_ADDR
-#else
-#define REAL_BLZ1230_ID ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060
-#define REAL_BLZ1230_ESP_ADDR BLZ1230II_ESP_ADDR
-#define REAL_BLZ1230_DMA_ADDR BLZ1230II_DMA_ADDR
-#endif
-
- if ((z = zorro_find_device(REAL_BLZ1230_ID, z))) {
- board = z->resource.start;
- if (request_mem_region(board+REAL_BLZ1230_ESP_ADDR,
- sizeof(struct ESP_regs), "NCR53C9x")) {
- /* Do some magic to figure out if the blizzard is
- * equipped with a SCSI controller
- */
- address = ZTWO_VADDR(board);
- eregs = (struct ESP_regs *)(address + REAL_BLZ1230_ESP_ADDR);
- esp = esp_allocate(tpnt, (void *)board + REAL_BLZ1230_ESP_ADDR,
- 0);
-
- esp_write(eregs->esp_cfg1, (ESP_CONFIG1_PENABLE | 7));
- udelay(5);
- if(esp_read(eregs->esp_cfg1) != (ESP_CONFIG1_PENABLE | 7))
- goto err_out;
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = 0;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = 0;
- esp->dma_led_on = 0;
- esp->dma_led_off = 0;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
-
- /* SCSI chip speed */
- esp->cfreq = 40000000;
-
- /* The DMA registers on the Blizzard are mapped
- * relative to the device (i.e. in the same Zorro
- * I/O block).
- */
- esp->dregs = (void *)(address + REAL_BLZ1230_DMA_ADDR);
-
- /* ESP register base */
- esp->eregs = eregs;
-
- /* Set the command buffer */
- esp->esp_command = cmd_buffer;
- esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
-
- esp->irq = IRQ_AMIGA_PORTS;
- esp->slot = board+REAL_BLZ1230_ESP_ADDR;
- if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
- "Blizzard 1230 SCSI IV", esp->ehost))
- goto err_out;
-
- /* Figure out our scsi ID on the bus */
- esp->scsi_id = 7;
-
- /* We don't have a differential SCSI-bus. */
- esp->diff = 0;
-
- esp_initialize(esp);
-
- printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
- esps_running = esps_in_use;
- return esps_in_use;
- }
- }
- return 0;
-
- err_out:
- scsi_unregister(esp->ehost);
- esp_deallocate(esp);
- release_mem_region(board+REAL_BLZ1230_ESP_ADDR,
- sizeof(struct ESP_regs));
- return 0;
-}
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Since the Blizzard DMA is fully dedicated to the ESP chip,
- * the number of bytes sent (to the ESP chip) equals the number
- * of bytes in the FIFO - there is no buffering in the DMA controller.
- * XXXX Do I read this right? It is from host to ESP, right?
- */
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- /* I don't think there's any limit on the Blizzard DMA. So we use what
- * the ESP chip can handle (24 bit).
- */
- unsigned long sz = sp->SCp.this_residual;
- if(sz > 0x1000000)
- sz = 0x1000000;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
- ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
- amiga_custom.intreqr, amiga_custom.intenar));
-}
-
-void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
-{
-#if MKIV
- struct blz1230_dma_registers *dregs =
- (struct blz1230_dma_registers *) (esp->dregs);
-#else
- struct blz1230II_dma_registers *dregs =
- (struct blz1230II_dma_registers *) (esp->dregs);
-#endif
-
- cache_clear(addr, length);
-
- addr >>= 1;
- addr &= ~(BLZ1230_DMA_WRITE);
-
- /* First set latch */
- dregs->dma_latch = (addr >> 24) & 0xff;
-
- /* Then pump the address to the DMA address register */
-#if MKIV
- dregs->dma_addr = (addr >> 24) & 0xff;
-#endif
- dregs->dma_addr = (addr >> 16) & 0xff;
- dregs->dma_addr = (addr >> 8) & 0xff;
- dregs->dma_addr = (addr ) & 0xff;
-}
-
-void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
-{
-#if MKIV
- struct blz1230_dma_registers *dregs =
- (struct blz1230_dma_registers *) (esp->dregs);
-#else
- struct blz1230II_dma_registers *dregs =
- (struct blz1230II_dma_registers *) (esp->dregs);
-#endif
-
- cache_push(addr, length);
-
- addr >>= 1;
- addr |= BLZ1230_DMA_WRITE;
-
- /* First set latch */
- dregs->dma_latch = (addr >> 24) & 0xff;
-
- /* Then pump the address to the DMA address register */
-#if MKIV
- dregs->dma_addr = (addr >> 24) & 0xff;
-#endif
- dregs->dma_addr = (addr >> 16) & 0xff;
- dregs->dma_addr = (addr >> 8) & 0xff;
- dregs->dma_addr = (addr ) & 0xff;
-}
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(esp->irq);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(esp->irq);
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR);
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- return ((amiga_custom.intenar) & IF_PORTS);
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if(write){
- dma_init_read(esp, addr, count);
- } else {
- dma_init_write(esp, addr, count);
- }
-}
-
-#define HOSTS_C
-
-int blz1230_esp_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
- esp_deallocate((struct NCR_ESP *)instance->hostdata);
- esp_release();
- release_mem_region(address, sizeof(struct ESP_regs));
- free_irq(IRQ_AMIGA_PORTS, esp_intr);
-#endif
- return 1;
-}
-
-
-static struct scsi_host_template driver_template = {
- .proc_name = "esp-blz1230",
- .proc_info = esp_proc_info,
- .name = "Blizzard1230 SCSI IV",
- .detect = blz1230_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = blz1230_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/blz2060.c b/drivers/scsi/blz2060.c
deleted file mode 100644
index b6203ec0096..00000000000
--- a/drivers/scsi/blz2060.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/* blz2060.c: Driver for Blizzard 2060 SCSI Controller.
- *
- * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
- *
- * This driver is based on the CyberStorm driver, hence the occasional
- * reference to CyberStorm.
- */
-
-/* TODO:
- *
- * 1) Figure out how to make a cleaner merge with the sparc driver with regard
- * to the caches and the Sparc MMU mapping.
- * 2) Make as few routines required outside the generic driver. A lot of the
- * routines in this file used to be inline!
- */
-
-#include <linux/module.h>
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/interrupt.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "NCR53C9x.h"
-
-#include <linux/zorro.h>
-#include <asm/irq.h>
-#include <asm/amigaints.h>
-#include <asm/amigahw.h>
-
-#include <asm/pgtable.h>
-
-/* The controller registers can be found in the Z2 config area at these
- * offsets:
- */
-#define BLZ2060_ESP_ADDR 0x1ff00
-#define BLZ2060_DMA_ADDR 0x1ffe0
-
-
-/* The Blizzard 2060 DMA interface
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * Only two things can be programmed in the Blizzard DMA:
- * 1) The data direction is controlled by the status of bit 31 (1 = write)
- * 2) The source/dest address (word aligned, shifted one right) in bits 30-0
- *
- * Figure out interrupt status by reading the ESP status byte.
- */
-struct blz2060_dma_registers {
- volatile unsigned char dma_led_ctrl; /* DMA led control [0x000] */
- unsigned char dmapad1[0x0f];
- volatile unsigned char dma_addr0; /* DMA address (MSB) [0x010] */
- unsigned char dmapad2[0x03];
- volatile unsigned char dma_addr1; /* DMA address [0x014] */
- unsigned char dmapad3[0x03];
- volatile unsigned char dma_addr2; /* DMA address [0x018] */
- unsigned char dmapad4[0x03];
- volatile unsigned char dma_addr3; /* DMA address (LSB) [0x01c] */
-};
-
-#define BLZ2060_DMA_WRITE 0x80000000
-
-/* DMA control bits */
-#define BLZ2060_DMA_LED 0x02 /* HD led control 1 = off */
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static void dma_led_off(struct NCR_ESP *esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-/***************************************************************** Detection */
-int __init blz2060_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- struct zorro_dev *z = NULL;
- unsigned long address;
-
- if ((z = zorro_find_device(ZORRO_PROD_PHASE5_BLIZZARD_2060, z))) {
- unsigned long board = z->resource.start;
- if (request_mem_region(board+BLZ2060_ESP_ADDR,
- sizeof(struct ESP_regs), "NCR53C9x")) {
- esp = esp_allocate(tpnt, (void *)board + BLZ2060_ESP_ADDR, 0);
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = 0;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = 0;
- esp->dma_led_on = &dma_led_on;
- esp->dma_led_off = &dma_led_off;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
-
- /* SCSI chip speed */
- esp->cfreq = 40000000;
-
- /* The DMA registers on the Blizzard are mapped
- * relative to the device (i.e. in the same Zorro
- * I/O block).
- */
- address = (unsigned long)ZTWO_VADDR(board);
- esp->dregs = (void *)(address + BLZ2060_DMA_ADDR);
-
- /* ESP register base */
- esp->eregs = (struct ESP_regs *)(address + BLZ2060_ESP_ADDR);
-
- /* Set the command buffer */
- esp->esp_command = cmd_buffer;
- esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
-
- esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
- "Blizzard 2060 SCSI", esp->ehost);
-
- /* Figure out our scsi ID on the bus */
- esp->scsi_id = 7;
-
- /* We don't have a differential SCSI-bus. */
- esp->diff = 0;
-
- esp_initialize(esp);
-
- printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
- esps_running = esps_in_use;
- return esps_in_use;
- }
- }
- return 0;
-}
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Since the Blizzard DMA is fully dedicated to the ESP chip,
- * the number of bytes sent (to the ESP chip) equals the number
- * of bytes in the FIFO - there is no buffering in the DMA controller.
- * XXXX Do I read this right? It is from host to ESP, right?
- */
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- /* I don't think there's any limit on the Blizzard DMA. So we use what
- * the ESP chip can handle (24 bit).
- */
- unsigned long sz = sp->SCp.this_residual;
- if(sz > 0x1000000)
- sz = 0x1000000;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
- ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
- amiga_custom.intreqr, amiga_custom.intenar));
-}
-
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct blz2060_dma_registers *dregs =
- (struct blz2060_dma_registers *) (esp->dregs);
-
- cache_clear(addr, length);
-
- addr >>= 1;
- addr &= ~(BLZ2060_DMA_WRITE);
- dregs->dma_addr3 = (addr ) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr0 = (addr >> 24) & 0xff;
-}
-
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct blz2060_dma_registers *dregs =
- (struct blz2060_dma_registers *) (esp->dregs);
-
- cache_push(addr, length);
-
- addr >>= 1;
- addr |= BLZ2060_DMA_WRITE;
- dregs->dma_addr3 = (addr ) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr0 = (addr >> 24) & 0xff;
-}
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(esp->irq);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(esp->irq);
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR);
-}
-
-static void dma_led_off(struct NCR_ESP *esp)
-{
- ((struct blz2060_dma_registers *) (esp->dregs))->dma_led_ctrl =
- BLZ2060_DMA_LED;
-}
-
-static void dma_led_on(struct NCR_ESP *esp)
-{
- ((struct blz2060_dma_registers *) (esp->dregs))->dma_led_ctrl = 0;
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- return ((amiga_custom.intenar) & IF_PORTS);
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if(write){
- dma_init_read(esp, addr, count);
- } else {
- dma_init_write(esp, addr, count);
- }
-}
-
-#define HOSTS_C
-
-int blz2060_esp_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
-
- esp_deallocate((struct NCR_ESP *)instance->hostdata);
- esp_release();
- release_mem_region(address, sizeof(struct ESP_regs));
- free_irq(IRQ_AMIGA_PORTS, esp_intr);
-#endif
- return 1;
-}
-
-
-static struct scsi_host_template driver_template = {
- .proc_name = "esp-blz2060",
- .proc_info = esp_proc_info,
- .name = "Blizzard2060 SCSI",
- .detect = blz2060_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = blz2060_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/cyberstorm.c b/drivers/scsi/cyberstorm.c
deleted file mode 100644
index c6b98a42e89..00000000000
--- a/drivers/scsi/cyberstorm.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/* cyberstorm.c: Driver for CyberStorm SCSI Controller.
- *
- * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
- *
- * The CyberStorm SCSI driver is based on David S. Miller's ESP driver
- * for the Sparc computers.
- *
- * This work was made possible by Phase5 who willingly (and most generously)
- * supported me with hardware and all the information I needed.
- */
-
-/* TODO:
- *
- * 1) Figure out how to make a cleaner merge with the sparc driver with regard
- * to the caches and the Sparc MMU mapping.
- * 2) Make as few routines required outside the generic driver. A lot of the
- * routines in this file used to be inline!
- */
-
-#include <linux/module.h>
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/interrupt.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "NCR53C9x.h"
-
-#include <linux/zorro.h>
-#include <asm/irq.h>
-#include <asm/amigaints.h>
-#include <asm/amigahw.h>
-
-#include <asm/pgtable.h>
-
-/* The controller registers can be found in the Z2 config area at these
- * offsets:
- */
-#define CYBER_ESP_ADDR 0xf400
-#define CYBER_DMA_ADDR 0xf800
-
-
-/* The CyberStorm DMA interface */
-struct cyber_dma_registers {
- volatile unsigned char dma_addr0; /* DMA address (MSB) [0x000] */
- unsigned char dmapad1[1];
- volatile unsigned char dma_addr1; /* DMA address [0x002] */
- unsigned char dmapad2[1];
- volatile unsigned char dma_addr2; /* DMA address [0x004] */
- unsigned char dmapad3[1];
- volatile unsigned char dma_addr3; /* DMA address (LSB) [0x006] */
- unsigned char dmapad4[0x3fb];
- volatile unsigned char cond_reg; /* DMA cond (ro) [0x402] */
-#define ctrl_reg cond_reg /* DMA control (wo) [0x402] */
-};
-
-/* DMA control bits */
-#define CYBER_DMA_LED 0x80 /* HD led control 1 = on */
-#define CYBER_DMA_WRITE 0x40 /* DMA direction. 1 = write */
-#define CYBER_DMA_Z3 0x20 /* 16 (Z2) or 32 (CHIP/Z3) bit DMA transfer */
-
-/* DMA status bits */
-#define CYBER_DMA_HNDL_INTR 0x80 /* DMA IRQ pending? */
-
-/* The bits below appears to be Phase5 Debug bits only; they were not
- * described by Phase5 so using them may seem a bit stupid...
- */
-#define CYBER_HOST_ID 0x02 /* If set, host ID should be 7, otherwise
- * it should be 6.
- */
-#define CYBER_SLOW_CABLE 0x08 /* If *not* set, assume SLOW_CABLE */
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static void dma_led_off(struct NCR_ESP *esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-
-static unsigned char ctrl_data = 0; /* Keep backup of the stuff written
- * to ctrl_reg. Always write a copy
- * to this register when writing to
- * the hardware register!
- */
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-/***************************************************************** Detection */
-int __init cyber_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- struct zorro_dev *z = NULL;
- unsigned long address;
-
- while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
- unsigned long board = z->resource.start;
- if ((z->id == ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM ||
- z->id == ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060) &&
- request_mem_region(board+CYBER_ESP_ADDR,
- sizeof(struct ESP_regs), "NCR53C9x")) {
- /* Figure out if this is a CyberStorm or really a
- * Fastlane/Blizzard Mk II by looking at the board size.
- * CyberStorm maps 64kB
- * (ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM does anyway)
- */
- if(z->resource.end-board != 0xffff) {
- release_mem_region(board+CYBER_ESP_ADDR,
- sizeof(struct ESP_regs));
- return 0;
- }
- esp = esp_allocate(tpnt, (void *)board + CYBER_ESP_ADDR, 0);
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = 0;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = 0;
- esp->dma_led_on = &dma_led_on;
- esp->dma_led_off = &dma_led_off;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
-
- /* SCSI chip speed */
- esp->cfreq = 40000000;
-
- /* The DMA registers on the CyberStorm are mapped
- * relative to the device (i.e. in the same Zorro
- * I/O block).
- */
- address = (unsigned long)ZTWO_VADDR(board);
- esp->dregs = (void *)(address + CYBER_DMA_ADDR);
-
- /* ESP register base */
- esp->eregs = (struct ESP_regs *)(address + CYBER_ESP_ADDR);
-
- /* Set the command buffer */
- esp->esp_command = cmd_buffer;
- esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
-
- esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
- "CyberStorm SCSI", esp->ehost);
- /* Figure out our scsi ID on the bus */
- /* The DMA cond flag contains a hardcoded jumper bit
- * which can be used to select host number 6 or 7.
- * However, even though it may change, we use a hardcoded
- * value of 7.
- */
- esp->scsi_id = 7;
-
- /* We don't have a differential SCSI-bus. */
- esp->diff = 0;
-
- esp_initialize(esp);
-
- printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
- esps_running = esps_in_use;
- return esps_in_use;
- }
- }
- return 0;
-}
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Since the CyberStorm DMA is fully dedicated to the ESP chip,
- * the number of bytes sent (to the ESP chip) equals the number
- * of bytes in the FIFO - there is no buffering in the DMA controller.
- * XXXX Do I read this right? It is from host to ESP, right?
- */
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- /* I don't think there's any limit on the CyberDMA. So we use what
- * the ESP chip can handle (24 bit).
- */
- unsigned long sz = sp->SCp.this_residual;
- if(sz > 0x1000000)
- sz = 0x1000000;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
- ESPLOG(("esp%d: dma -- cond_reg<%02x>\n",
- esp->esp_id, ((struct cyber_dma_registers *)
- (esp->dregs))->cond_reg));
- ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
- amiga_custom.intreqr, amiga_custom.intenar));
-}
-
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct cyber_dma_registers *dregs =
- (struct cyber_dma_registers *) esp->dregs;
-
- cache_clear(addr, length);
-
- addr &= ~(1);
- dregs->dma_addr0 = (addr >> 24) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr3 = (addr ) & 0xff;
- ctrl_data &= ~(CYBER_DMA_WRITE);
-
- /* Check if physical address is outside Z2 space and of
- * block length/block aligned in memory. If this is the
- * case, enable 32 bit transfer. In all other cases, fall back
- * to 16 bit transfer.
- * Obviously 32 bit transfer should be enabled if the DMA address
- * and length are 32 bit aligned. However, this leads to some
- * strange behavior. Even 64 bit aligned addr/length fails.
- * Until I've found a reason for this, 32 bit transfer is only
- * used for full-block transfers (1kB).
- * -jskov
- */
-#if 0
- if((addr & 0x3fc) || length & 0x3ff || ((addr > 0x200000) &&
- (addr < 0xff0000)))
- ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */
- else
- ctrl_data |= CYBER_DMA_Z3; /* CHIP/Z3, do 32 bit DMA */
-#else
- ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */
-#endif
- dregs->ctrl_reg = ctrl_data;
-}
-
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct cyber_dma_registers *dregs =
- (struct cyber_dma_registers *) esp->dregs;
-
- cache_push(addr, length);
-
- addr |= 1;
- dregs->dma_addr0 = (addr >> 24) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr3 = (addr ) & 0xff;
- ctrl_data |= CYBER_DMA_WRITE;
-
- /* See comment above */
-#if 0
- if((addr & 0x3fc) || length & 0x3ff || ((addr > 0x200000) &&
- (addr < 0xff0000)))
- ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */
- else
- ctrl_data |= CYBER_DMA_Z3; /* CHIP/Z3, do 32 bit DMA */
-#else
- ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */
-#endif
- dregs->ctrl_reg = ctrl_data;
-}
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(esp->irq);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(esp->irq);
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- /* It's important to check the DMA IRQ bit in the correct way! */
- return ((esp_read(esp->eregs->esp_status) & ESP_STAT_INTR) &&
- ((((struct cyber_dma_registers *)(esp->dregs))->cond_reg) &
- CYBER_DMA_HNDL_INTR));
-}
-
-static void dma_led_off(struct NCR_ESP *esp)
-{
- ctrl_data &= ~CYBER_DMA_LED;
- ((struct cyber_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;
-}
-
-static void dma_led_on(struct NCR_ESP *esp)
-{
- ctrl_data |= CYBER_DMA_LED;
- ((struct cyber_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- return ((amiga_custom.intenar) & IF_PORTS);
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if(write){
- dma_init_read(esp, addr, count);
- } else {
- dma_init_write(esp, addr, count);
- }
-}
-
-#define HOSTS_C
-
-int cyber_esp_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
-
- esp_deallocate((struct NCR_ESP *)instance->hostdata);
- esp_release();
- release_mem_region(address, sizeof(struct ESP_regs));
- free_irq(IRQ_AMIGA_PORTS, esp_intr);
-#endif
- return 1;
-}
-
-
-static struct scsi_host_template driver_template = {
- .proc_name = "esp-cyberstorm",
- .proc_info = esp_proc_info,
- .name = "CyberStorm SCSI",
- .detect = cyber_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = cyber_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/cyberstormII.c b/drivers/scsi/cyberstormII.c
deleted file mode 100644
index e336e853e66..00000000000
--- a/drivers/scsi/cyberstormII.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/* cyberstormII.c: Driver for CyberStorm SCSI Mk II
- *
- * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
- *
- * This driver is based on cyberstorm.c
- */
-
-/* TODO:
- *
- * 1) Figure out how to make a cleaner merge with the sparc driver with regard
- * to the caches and the Sparc MMU mapping.
- * 2) Make as few routines required outside the generic driver. A lot of the
- * routines in this file used to be inline!
- */
-
-#include <linux/module.h>
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/interrupt.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "NCR53C9x.h"
-
-#include <linux/zorro.h>
-#include <asm/irq.h>
-#include <asm/amigaints.h>
-#include <asm/amigahw.h>
-
-#include <asm/pgtable.h>
-
-/* The controller registers can be found in the Z2 config area at these
- * offsets:
- */
-#define CYBERII_ESP_ADDR 0x1ff03
-#define CYBERII_DMA_ADDR 0x1ff43
-
-
-/* The CyberStorm II DMA interface */
-struct cyberII_dma_registers {
- volatile unsigned char cond_reg; /* DMA cond (ro) [0x000] */
-#define ctrl_reg cond_reg /* DMA control (wo) [0x000] */
- unsigned char dmapad4[0x3f];
- volatile unsigned char dma_addr0; /* DMA address (MSB) [0x040] */
- unsigned char dmapad1[3];
- volatile unsigned char dma_addr1; /* DMA address [0x044] */
- unsigned char dmapad2[3];
- volatile unsigned char dma_addr2; /* DMA address [0x048] */
- unsigned char dmapad3[3];
- volatile unsigned char dma_addr3; /* DMA address (LSB) [0x04c] */
-};
-
-/* DMA control bits */
-#define CYBERII_DMA_LED 0x02 /* HD led control 1 = on */
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static void dma_led_off(struct NCR_ESP *esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-/***************************************************************** Detection */
-int __init cyberII_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- struct zorro_dev *z = NULL;
- unsigned long address;
- struct ESP_regs *eregs;
-
- if ((z = zorro_find_device(ZORRO_PROD_PHASE5_CYBERSTORM_MK_II, z))) {
- unsigned long board = z->resource.start;
- if (request_mem_region(board+CYBERII_ESP_ADDR,
- sizeof(struct ESP_regs), "NCR53C9x")) {
- /* Do some magic to figure out if the CyberStorm Mk II
- * is equipped with a SCSI controller
- */
- address = (unsigned long)ZTWO_VADDR(board);
- eregs = (struct ESP_regs *)(address + CYBERII_ESP_ADDR);
-
- esp = esp_allocate(tpnt, (void *)board + CYBERII_ESP_ADDR, 0);
-
- esp_write(eregs->esp_cfg1, (ESP_CONFIG1_PENABLE | 7));
- udelay(5);
- if(esp_read(eregs->esp_cfg1) != (ESP_CONFIG1_PENABLE | 7)) {
- esp_deallocate(esp);
- scsi_unregister(esp->ehost);
- release_mem_region(board+CYBERII_ESP_ADDR,
- sizeof(struct ESP_regs));
- return 0; /* Bail out if address did not hold data */
- }
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = 0;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = 0;
- esp->dma_led_on = &dma_led_on;
- esp->dma_led_off = &dma_led_off;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
-
- /* SCSI chip speed */
- esp->cfreq = 40000000;
-
- /* The DMA registers on the CyberStorm are mapped
- * relative to the device (i.e. in the same Zorro
- * I/O block).
- */
- esp->dregs = (void *)(address + CYBERII_DMA_ADDR);
-
- /* ESP register base */
- esp->eregs = eregs;
-
- /* Set the command buffer */
- esp->esp_command = cmd_buffer;
- esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
-
- esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
- "CyberStorm SCSI Mk II", esp->ehost);
-
- /* Figure out our scsi ID on the bus */
- esp->scsi_id = 7;
-
- /* We don't have a differential SCSI-bus. */
- esp->diff = 0;
-
- esp_initialize(esp);
-
- printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
- esps_running = esps_in_use;
- return esps_in_use;
- }
- }
- return 0;
-}
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Since the CyberStorm DMA is fully dedicated to the ESP chip,
- * the number of bytes sent (to the ESP chip) equals the number
- * of bytes in the FIFO - there is no buffering in the DMA controller.
- * XXXX Do I read this right? It is from host to ESP, right?
- */
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- /* I don't think there's any limit on the CyberDMA. So we use what
- * the ESP chip can handle (24 bit).
- */
- unsigned long sz = sp->SCp.this_residual;
- if(sz > 0x1000000)
- sz = 0x1000000;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
- ESPLOG(("esp%d: dma -- cond_reg<%02x>\n",
- esp->esp_id, ((struct cyberII_dma_registers *)
- (esp->dregs))->cond_reg));
- ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
- amiga_custom.intreqr, amiga_custom.intenar));
-}
-
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct cyberII_dma_registers *dregs =
- (struct cyberII_dma_registers *) esp->dregs;
-
- cache_clear(addr, length);
-
- addr &= ~(1);
- dregs->dma_addr0 = (addr >> 24) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr3 = (addr ) & 0xff;
-}
-
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct cyberII_dma_registers *dregs =
- (struct cyberII_dma_registers *) esp->dregs;
-
- cache_push(addr, length);
-
- addr |= 1;
- dregs->dma_addr0 = (addr >> 24) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr3 = (addr ) & 0xff;
-}
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(esp->irq);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(esp->irq);
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- /* It's important to check the DMA IRQ bit in the correct way! */
- return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR);
-}
-
-static void dma_led_off(struct NCR_ESP *esp)
-{
- ((struct cyberII_dma_registers *)(esp->dregs))->ctrl_reg &= ~CYBERII_DMA_LED;
-}
-
-static void dma_led_on(struct NCR_ESP *esp)
-{
- ((struct cyberII_dma_registers *)(esp->dregs))->ctrl_reg |= CYBERII_DMA_LED;
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- return ((amiga_custom.intenar) & IF_PORTS);
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if(write){
- dma_init_read(esp, addr, count);
- } else {
- dma_init_write(esp, addr, count);
- }
-}
-
-#define HOSTS_C
-
-int cyberII_esp_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
-
- esp_deallocate((struct NCR_ESP *)instance->hostdata);
- esp_release();
- release_mem_region(address, sizeof(struct ESP_regs));
- free_irq(IRQ_AMIGA_PORTS, esp_intr);
-#endif
- return 1;
-}
-
-
-static struct scsi_host_template driver_template = {
- .proc_name = "esp-cyberstormII",
- .proc_info = esp_proc_info,
- .name = "CyberStorm Mk II SCSI",
- .detect = cyberII_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = cyberII_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/fastlane.c b/drivers/scsi/fastlane.c
deleted file mode 100644
index 4266a2139b5..00000000000
--- a/drivers/scsi/fastlane.c
+++ /dev/null
@@ -1,421 +0,0 @@
-/* fastlane.c: Driver for Phase5's Fastlane SCSI Controller.
- *
- * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
- *
- * This driver is based on the CyberStorm driver, hence the occasional
- * reference to CyberStorm.
- *
- * Betatesting & crucial adjustments by
- * Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz)
- *
- */
-
-/* TODO:
- *
- * o According to the doc from laire, it is required to reset the DMA when
- * the transfer is done. ATM we reset DMA just before every new
- * dma_init_(read|write).
- *
- * 1) Figure out how to make a cleaner merge with the sparc driver with regard
- * to the caches and the Sparc MMU mapping.
- * 2) Make as few routines required outside the generic driver. A lot of the
- * routines in this file used to be inline!
- */
-
-#include <linux/module.h>
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/interrupt.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "NCR53C9x.h"
-
-#include <linux/zorro.h>
-#include <asm/irq.h>
-
-#include <asm/amigaints.h>
-#include <asm/amigahw.h>
-
-#include <asm/pgtable.h>
-
-/* Such day has just come... */
-#if 0
-/* Let this defined unless you really need to enable DMA IRQ one day */
-#define NODMAIRQ
-#endif
-
-/* The controller registers can be found in the Z2 config area at these
- * offsets:
- */
-#define FASTLANE_ESP_ADDR 0x1000001
-#define FASTLANE_DMA_ADDR 0x1000041
-
-
-/* The Fastlane DMA interface */
-struct fastlane_dma_registers {
- volatile unsigned char cond_reg; /* DMA status (ro) [0x0000] */
-#define ctrl_reg cond_reg /* DMA control (wo) [0x0000] */
- unsigned char dmapad1[0x3f];
- volatile unsigned char clear_strobe; /* DMA clear (wo) [0x0040] */
-};
-
-
-/* DMA status bits */
-#define FASTLANE_DMA_MINT 0x80
-#define FASTLANE_DMA_IACT 0x40
-#define FASTLANE_DMA_CREQ 0x20
-
-/* DMA control bits */
-#define FASTLANE_DMA_FCODE 0xa0
-#define FASTLANE_DMA_MASK 0xf3
-#define FASTLANE_DMA_LED 0x10 /* HD led control 1 = on */
-#define FASTLANE_DMA_WRITE 0x08 /* 1 = write */
-#define FASTLANE_DMA_ENABLE 0x04 /* Enable DMA */
-#define FASTLANE_DMA_EDI 0x02 /* Enable DMA IRQ ? */
-#define FASTLANE_DMA_ESI 0x01 /* Enable SCSI IRQ */
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 vaddr, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static void dma_irq_exit(struct NCR_ESP *esp);
-static void dma_led_off(struct NCR_ESP *esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-
-static unsigned char ctrl_data = 0; /* Keep backup of the stuff written
- * to ctrl_reg. Always write a copy
- * to this register when writing to
- * the hardware register!
- */
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-static inline void dma_clear(struct NCR_ESP *esp)
-{
- struct fastlane_dma_registers *dregs =
- (struct fastlane_dma_registers *) (esp->dregs);
- unsigned long *t;
-
- ctrl_data = (ctrl_data & FASTLANE_DMA_MASK);
- dregs->ctrl_reg = ctrl_data;
-
- t = (unsigned long *)(esp->edev);
-
- dregs->clear_strobe = 0;
- *t = 0 ;
-}
-
-/***************************************************************** Detection */
-int __init fastlane_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- struct zorro_dev *z = NULL;
- unsigned long address;
-
- if ((z = zorro_find_device(ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060, z))) {
- unsigned long board = z->resource.start;
- if (request_mem_region(board+FASTLANE_ESP_ADDR,
- sizeof(struct ESP_regs), "NCR53C9x")) {
- /* Check if this is really a fastlane controller. The problem
- * is that also the cyberstorm and blizzard controllers use
- * this ID value. Fortunately only Fastlane maps in Z3 space
- */
- if (board < 0x1000000) {
- goto err_release;
- }
- esp = esp_allocate(tpnt, (void *)board + FASTLANE_ESP_ADDR, 0);
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = 0;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = &dma_irq_exit;
- esp->dma_led_on = &dma_led_on;
- esp->dma_led_off = &dma_led_off;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
-
- /* Initialize the portBits (enable IRQs) */
- ctrl_data = (FASTLANE_DMA_FCODE |
-#ifndef NODMAIRQ
- FASTLANE_DMA_EDI |
-#endif
- FASTLANE_DMA_ESI);
-
-
- /* SCSI chip clock */
- esp->cfreq = 40000000;
-
-
- /* Map the physical address space into virtual kernel space */
- address = (unsigned long)
- z_ioremap(board, z->resource.end-board+1);
-
- if(!address){
- printk("Could not remap Fastlane controller memory!");
- goto err_unregister;
- }
-
-
- /* The DMA registers on the Fastlane are mapped
- * relative to the device (i.e. in the same Zorro
- * I/O block).
- */
- esp->dregs = (void *)(address + FASTLANE_DMA_ADDR);
-
- /* ESP register base */
- esp->eregs = (struct ESP_regs *)(address + FASTLANE_ESP_ADDR);
-
- /* Board base */
- esp->edev = (void *) address;
-
- /* Set the command buffer */
- esp->esp_command = cmd_buffer;
- esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
-
- esp->irq = IRQ_AMIGA_PORTS;
- esp->slot = board+FASTLANE_ESP_ADDR;
- if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
- "Fastlane SCSI", esp->ehost)) {
- printk(KERN_WARNING "Fastlane: Could not get IRQ%d, aborting.\n", IRQ_AMIGA_PORTS);
- goto err_unmap;
- }
-
- /* Controller ID */
- esp->scsi_id = 7;
-
- /* We don't have a differential SCSI-bus. */
- esp->diff = 0;
-
- dma_clear(esp);
- esp_initialize(esp);
-
- printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
- esps_running = esps_in_use;
- return esps_in_use;
- }
- }
- return 0;
-
- err_unmap:
- z_iounmap((void *)address);
- err_unregister:
- scsi_unregister (esp->ehost);
- err_release:
- release_mem_region(z->resource.start+FASTLANE_ESP_ADDR,
- sizeof(struct ESP_regs));
- return 0;
-}
-
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Since the Fastlane DMA is fully dedicated to the ESP chip,
- * the number of bytes sent (to the ESP chip) equals the number
- * of bytes in the FIFO - there is no buffering in the DMA controller.
- * XXXX Do I read this right? It is from host to ESP, right?
- */
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- unsigned long sz = sp->SCp.this_residual;
- if(sz > 0xfffc)
- sz = 0xfffc;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
- ESPLOG(("esp%d: dma -- cond_reg<%02x>\n",
- esp->esp_id, ((struct fastlane_dma_registers *)
- (esp->dregs))->cond_reg));
- ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
- amiga_custom.intreqr, amiga_custom.intenar));
-}
-
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct fastlane_dma_registers *dregs =
- (struct fastlane_dma_registers *) (esp->dregs);
- unsigned long *t;
-
- cache_clear(addr, length);
-
- dma_clear(esp);
-
- t = (unsigned long *)((addr & 0x00ffffff) + esp->edev);
-
- dregs->clear_strobe = 0;
- *t = addr;
-
- ctrl_data = (ctrl_data & FASTLANE_DMA_MASK) | FASTLANE_DMA_ENABLE;
- dregs->ctrl_reg = ctrl_data;
-}
-
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct fastlane_dma_registers *dregs =
- (struct fastlane_dma_registers *) (esp->dregs);
- unsigned long *t;
-
- cache_push(addr, length);
-
- dma_clear(esp);
-
- t = (unsigned long *)((addr & 0x00ffffff) + (esp->edev));
-
- dregs->clear_strobe = 0;
- *t = addr;
-
- ctrl_data = ((ctrl_data & FASTLANE_DMA_MASK) |
- FASTLANE_DMA_ENABLE |
- FASTLANE_DMA_WRITE);
- dregs->ctrl_reg = ctrl_data;
-}
-
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(esp->irq);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(esp->irq);
-}
-
-static void dma_irq_exit(struct NCR_ESP *esp)
-{
- struct fastlane_dma_registers *dregs =
- (struct fastlane_dma_registers *) (esp->dregs);
-
- dregs->ctrl_reg = ctrl_data & ~(FASTLANE_DMA_EDI|FASTLANE_DMA_ESI);
-#ifdef __mc68000__
- nop();
-#endif
- dregs->ctrl_reg = ctrl_data;
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- struct fastlane_dma_registers *dregs =
- (struct fastlane_dma_registers *) (esp->dregs);
- unsigned char dma_status;
-
- dma_status = dregs->cond_reg;
-
- if(dma_status & FASTLANE_DMA_IACT)
- return 0; /* not our IRQ */
-
- /* Return non-zero if ESP requested IRQ */
- return (
-#ifndef NODMAIRQ
- (dma_status & FASTLANE_DMA_CREQ) &&
-#endif
- (!(dma_status & FASTLANE_DMA_MINT)) &&
- (esp_read(((struct ESP_regs *) (esp->eregs))->esp_status) & ESP_STAT_INTR));
-}
-
-static void dma_led_off(struct NCR_ESP *esp)
-{
- ctrl_data &= ~FASTLANE_DMA_LED;
- ((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;
-}
-
-static void dma_led_on(struct NCR_ESP *esp)
-{
- ctrl_data |= FASTLANE_DMA_LED;
- ((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- return ((amiga_custom.intenar) & IF_PORTS);
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if(write){
- dma_init_read(esp, addr, count);
- } else {
- dma_init_write(esp, addr, count);
- }
-}
-
-#define HOSTS_C
-
-int fastlane_esp_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
- esp_deallocate((struct NCR_ESP *)instance->hostdata);
- esp_release();
- release_mem_region(address, sizeof(struct ESP_regs));
- free_irq(IRQ_AMIGA_PORTS, esp_intr);
-#endif
- return 1;
-}
-
-
-static struct scsi_host_template driver_template = {
- .proc_name = "esp-fastlane",
- .proc_info = esp_proc_info,
- .name = "Fastlane SCSI",
- .detect = fastlane_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = fastlane_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
deleted file mode 100644
index bcb49021b7e..00000000000
--- a/drivers/scsi/mac_esp.c
+++ /dev/null
@@ -1,751 +0,0 @@
-/*
- * 68k mac 53c9[46] scsi driver
- *
- * copyright (c) 1998, David Weis weisd3458@uni.edu
- *
- * debugging on Quadra 800 and 660AV Michael Schmitz, Dave Kilzer 7/98
- *
- * based loosely on cyber_esp.c
- */
-
-/* these are unused for now */
-#define myreadl(addr) (*(volatile unsigned int *) (addr))
-#define mywritel(b, addr) ((*(volatile unsigned int *) (addr)) = (b))
-
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "NCR53C9x.h"
-
-#include <asm/io.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/macints.h>
-#include <asm/machw.h>
-#include <asm/mac_via.h>
-
-#include <asm/pgtable.h>
-
-#include <asm/macintosh.h>
-
-/* #define DEBUG_MAC_ESP */
-
-extern void esp_handle(struct NCR_ESP *esp);
-extern void mac_esp_intr(int irq, void *dev_id);
-
-static int dma_bytes_sent(struct NCR_ESP * esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP * esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP * esp);
-static void dma_init_read(struct NCR_ESP * esp, char * vaddress, int length);
-static void dma_init_write(struct NCR_ESP * esp, char * vaddress, int length);
-static void dma_ints_off(struct NCR_ESP * esp);
-static void dma_ints_on(struct NCR_ESP * esp);
-static int dma_irq_p(struct NCR_ESP * esp);
-static int dma_irq_p_quick(struct NCR_ESP * esp);
-static void dma_led_off(struct NCR_ESP * esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP * esp, __u32 addr, int count, int write);
-static void dma_setup_quick(struct NCR_ESP * esp, __u32 addr, int count, int write);
-
-static int esp_dafb_dma_irq_p(struct NCR_ESP * espdev);
-static int esp_iosb_dma_irq_p(struct NCR_ESP * espdev);
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-static int esp_initialized = 0;
-
-static int setup_num_esps = -1;
-static int setup_disconnect = -1;
-static int setup_nosync = -1;
-static int setup_can_queue = -1;
-static int setup_cmd_per_lun = -1;
-static int setup_sg_tablesize = -1;
-#ifdef SUPPORT_TAGS
-static int setup_use_tagged_queuing = -1;
-#endif
-static int setup_hostid = -1;
-
-/*
- * Experimental ESP inthandler; check macints.c to make sure dev_id is
- * set up properly!
- */
-
-void mac_esp_intr(int irq, void *dev_id)
-{
- struct NCR_ESP *esp = (struct NCR_ESP *) dev_id;
- int irq_p = 0;
-
- /* Handle the one ESP interrupt showing at this IRQ level. */
- if(((esp)->irq & 0xff) == irq) {
- /*
- * Debug ..
- */
- irq_p = esp->dma_irq_p(esp);
- printk("mac_esp: irq_p %x current %p disconnected %p\n",
- irq_p, esp->current_SC, esp->disconnected_SC);
-
- /*
- * Mac: if we're here, it's an ESP interrupt for sure!
- */
- if((esp->current_SC || esp->disconnected_SC)) {
- esp->dma_ints_off(esp);
-
- ESPIRQ(("I%d(", esp->esp_id));
- esp_handle(esp);
- ESPIRQ((")"));
-
- esp->dma_ints_on(esp);
- }
- }
-}
-
-/*
- * Debug hooks; use for playing with the interrupt flag testing and interrupt
- * acknowledge on the various machines
- */
-
-void scsi_esp_polled(int irq, void *dev_id)
-{
- if (esp_initialized == 0)
- return;
-
- mac_esp_intr(irq, dev_id);
-}
-
-void fake_intr(int irq, void *dev_id)
-{
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: got irq\n");
-#endif
-
- mac_esp_intr(irq, dev_id);
-}
-
-irqreturn_t fake_drq(int irq, void *dev_id)
-{
- printk("mac_esp: got drq\n");
- return IRQ_HANDLED;
-}
-
-#define DRIVER_SETUP
-
-/*
- * Function : mac_esp_setup(char *str)
- *
- * Purpose : booter command line initialization of the overrides array,
- *
- * Inputs : str - parameters, separated by commas.
- *
- * Currently unused in the new driver; need to add settable parameters to the
- * detect function.
- *
- */
-
-static int __init mac_esp_setup(char *str) {
-#ifdef DRIVER_SETUP
- /* Format of mac53c9x parameter is:
- * mac53c9x=<num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
- * Negative values mean don't change.
- */
-
- char *this_opt;
- long opt;
-
- this_opt = strsep (&str, ",");
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
-
- if (opt >= 0 && opt <= 2)
- setup_num_esps = opt;
- else if (opt > 2)
- printk( "mac_esp_setup: invalid number of hosts %ld !\n", opt );
-
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
-
- if (opt > 0)
- setup_disconnect = opt;
-
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
-
- if (opt >= 0)
- setup_nosync = opt;
-
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
-
- if (opt > 0)
- setup_can_queue = opt;
-
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
-
- if (opt > 0)
- setup_cmd_per_lun = opt;
-
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
-
- if (opt >= 0) {
- setup_sg_tablesize = opt;
- /* Must be <= SG_ALL (255) */
- if (setup_sg_tablesize > SG_ALL)
- setup_sg_tablesize = SG_ALL;
- }
-
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
-
- /* Must be between 0 and 7 */
- if (opt >= 0 && opt <= 7)
- setup_hostid = opt;
- else if (opt > 7)
- printk( "mac_esp_setup: invalid host ID %ld !\n", opt);
-
- this_opt = strsep (&str, ",");
- }
-#ifdef SUPPORT_TAGS
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
- if (opt >= 0)
- setup_use_tagged_queuing = !!opt;
- }
-#endif
-#endif
- return 1;
-}
-
-__setup("mac53c9x=", mac_esp_setup);
-
-
-/*
- * ESP address 'detection'
- */
-
-unsigned long get_base(int chip_num)
-{
- /*
- * using the chip_num and mac model, figure out where the
- * chips are mapped
- */
-
- unsigned long io_base = 0x50f00000;
- unsigned int second_offset = 0x402;
- unsigned long scsi_loc = 0;
-
- switch (macintosh_config->scsi_type) {
-
- /* 950, 900, 700 */
- case MAC_SCSI_QUADRA2:
- scsi_loc = io_base + 0xf000 + ((chip_num == 0) ? 0 : second_offset);
- break;
-
- /* av's */
- case MAC_SCSI_QUADRA3:
- scsi_loc = io_base + 0x18000 + ((chip_num == 0) ? 0 : second_offset);
- break;
-
- /* most quadra/centris models are like this */
- case MAC_SCSI_QUADRA:
- scsi_loc = io_base + 0x10000;
- break;
-
- default:
- printk("mac_esp: get_base: hit default!\n");
- scsi_loc = io_base + 0x10000;
- break;
-
- } /* switch */
-
- printk("mac_esp: io base at 0x%lx\n", scsi_loc);
-
- return scsi_loc;
-}
-
-/*
- * Model dependent ESP setup
- */
-
-int mac_esp_detect(struct scsi_host_template * tpnt)
-{
- int quick = 0;
- int chipnum, chipspresent = 0;
-#if 0
- unsigned long timeout;
-#endif
-
- if (esp_initialized > 0)
- return -ENODEV;
-
- /* what do we have in this machine... */
- if (MACHW_PRESENT(MAC_SCSI_96)) {
- chipspresent ++;
- }
-
- if (MACHW_PRESENT(MAC_SCSI_96_2)) {
- chipspresent ++;
- }
-
- /* number of ESPs present ? */
- if (setup_num_esps >= 0) {
- if (chipspresent >= setup_num_esps)
- chipspresent = setup_num_esps;
- else
- printk("mac_esp_detect: num_hosts detected %d setup %d \n",
- chipspresent, setup_num_esps);
- }
-
- /* TODO: add disconnect / nosync flags */
-
- /* setup variables */
- tpnt->can_queue =
- (setup_can_queue > 0) ? setup_can_queue : 7;
- tpnt->cmd_per_lun =
- (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : 1;
- tpnt->sg_tablesize =
- (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_ALL;
-
- if (setup_hostid >= 0)
- tpnt->this_id = setup_hostid;
- else {
- /* use 7 as default */
- tpnt->this_id = 7;
- }
-
-#ifdef SUPPORT_TAGS
- if (setup_use_tagged_queuing < 0)
- setup_use_tagged_queuing = DEFAULT_USE_TAGGED_QUEUING;
-#endif
-
- for (chipnum = 0; chipnum < chipspresent; chipnum ++) {
- struct NCR_ESP * esp;
-
- esp = esp_allocate(tpnt, NULL, 0);
- esp->eregs = (struct ESP_regs *) get_base(chipnum);
-
- esp->dma_irq_p = &esp_dafb_dma_irq_p;
- if (chipnum == 0) {
-
- if (macintosh_config->scsi_type == MAC_SCSI_QUADRA) {
- /* most machines except those below :-) */
- quick = 1;
- esp->dma_irq_p = &esp_iosb_dma_irq_p;
- } else if (macintosh_config->scsi_type == MAC_SCSI_QUADRA3) {
- /* mostly av's */
- quick = 0;
- } else {
- /* q950, 900, 700 */
- quick = 1;
- out_be32(0xf9800024, 0x1d1);
- esp->dregs = (void *) 0xf9800024;
- }
-
- } else { /* chipnum */
-
- quick = 1;
- out_be32(0xf9800028, 0x1d1);
- esp->dregs = (void *) 0xf9800028;
-
- } /* chipnum == 0 */
-
- /* use pio for command bytes; pio for message/data: TBI */
- esp->do_pio_cmds = 1;
-
- /* Set the command buffer */
- esp->esp_command = (volatile unsigned char*) cmd_buffer;
- esp->esp_command_dvma = (__u32) cmd_buffer;
-
- /* various functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = NULL;
- esp->dma_init_write = NULL;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
-
- esp->dma_ports_p = &dma_ports_p;
-
-
- /* Optional functions */
- esp->dma_barrier = NULL;
- esp->dma_drain = NULL;
- esp->dma_invalidate = NULL;
- esp->dma_irq_entry = NULL;
- esp->dma_irq_exit = NULL;
- esp->dma_led_on = NULL;
- esp->dma_led_off = NULL;
- esp->dma_poll = NULL;
- esp->dma_reset = NULL;
-
- /* SCSI chip speed */
- /* below esp->cfreq = 40000000; */
-
-
- if (quick) {
- /* 'quick' means there's handshake glue logic like in the 5380 case */
- esp->dma_setup = &dma_setup_quick;
- } else {
- esp->dma_setup = &dma_setup;
- }
-
- if (chipnum == 0) {
-
- esp->irq = IRQ_MAC_SCSI;
-
- request_irq(IRQ_MAC_SCSI, esp_intr, 0, "Mac ESP SCSI", esp->ehost);
-#if 0 /* conflicts with IOP ADB */
- request_irq(IRQ_MAC_SCSIDRQ, fake_drq, 0, "Mac ESP DRQ", esp->ehost);
-#endif
-
- if (macintosh_config->scsi_type == MAC_SCSI_QUADRA) {
- esp->cfreq = 16500000;
- } else {
- esp->cfreq = 25000000;
- }
-
-
- } else { /* chipnum == 1 */
-
- esp->irq = IRQ_MAC_SCSIDRQ;
-#if 0 /* conflicts with IOP ADB */
- request_irq(IRQ_MAC_SCSIDRQ, esp_intr, 0, "Mac ESP SCSI 2", esp->ehost);
-#endif
-
- esp->cfreq = 25000000;
-
- }
-
- if (quick) {
- printk("esp: using quick version\n");
- }
-
- printk("esp: addr at 0x%p\n", esp->eregs);
-
- esp->scsi_id = 7;
- esp->diff = 0;
-
- esp_initialize(esp);
-
- } /* for chipnum */
-
- if (chipspresent)
- printk("\nmac_esp: %d esp controllers found\n", chipspresent);
-
- esp_initialized = chipspresent;
-
- return chipspresent;
-}
-
-static int mac_esp_release(struct Scsi_Host *shost)
-{
- if (shost->irq)
- free_irq(shost->irq, NULL);
- if (shost->io_port && shost->n_io_port)
- release_region(shost->io_port, shost->n_io_port);
- scsi_unregister(shost);
- return 0;
-}
-
-/*
- * I've been wondering what this is supposed to do, for some time. Talking
- * to Allen Briggs: These machines have an extra register someplace where the
- * DRQ pin of the ESP can be monitored. That isn't useful for determining
- * anything else (such as reselect interrupt or other magic) though.
- * Maybe make the semantics should be changed like
- * if (esp->current_SC)
- * ... check DRQ flag ...
- * else
- * ... disconnected, check pending VIA interrupt ...
- *
- * There's a problem with using the dabf flag or mac_irq_pending() here: both
- * seem to return 1 even though no interrupt is currently pending, resulting
- * in esp_exec_cmd() holding off the next command, and possibly infinite loops
- * in esp_intr().
- * Short term fix: just use esp_status & ESP_STAT_INTR here, as long as we
- * use simple PIO. The DRQ status will be important when implementing pseudo
- * DMA mode (set up ESP transfer count, return, do a batch of bytes in PIO or
- * 'hardware handshake' mode upon DRQ).
- * If you plan on changing this (i.e. to save the esp_status register access in
- * favor of a VIA register access or a shadow register for the IFR), make sure
- * to try a debug version of this first to monitor what registers would be a good
- * indicator of the ESP interrupt.
- */
-
-static int esp_dafb_dma_irq_p(struct NCR_ESP * esp)
-{
- unsigned int ret;
- int sreg = esp_read(esp->eregs->esp_status);
-
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: esp_dafb_dma_irq_p dafb %d irq %d\n",
- readl(esp->dregs), mac_irq_pending(IRQ_MAC_SCSI));
-#endif
-
- sreg &= ESP_STAT_INTR;
-
- /*
- * maybe working; this is essentially what's used for iosb_dma_irq_p
- */
- if (sreg)
- return 1;
- else
- return 0;
-
- /*
- * didn't work ...
- */
-#if 0
- if (esp->current_SC)
- ret = readl(esp->dregs) & 0x200;
- else if (esp->disconnected_SC)
- ret = 1; /* sreg ?? */
- else
- ret = mac_irq_pending(IRQ_MAC_SCSI);
-
- return(ret);
-#endif
-
-}
-
-/*
- * See above: testing mac_irq_pending always returned 8 (SCSI IRQ) regardless
- * of the actual ESP status.
- */
-
-static int esp_iosb_dma_irq_p(struct NCR_ESP * esp)
-{
- int ret = mac_irq_pending(IRQ_MAC_SCSI) || mac_irq_pending(IRQ_MAC_SCSIDRQ);
- int sreg = esp_read(esp->eregs->esp_status);
-
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_irq_p drq %d irq %d sreg %x curr %p disc %p\n",
- mac_irq_pending(IRQ_MAC_SCSIDRQ), mac_irq_pending(IRQ_MAC_SCSI),
- sreg, esp->current_SC, esp->disconnected_SC);
-#endif
-
- sreg &= ESP_STAT_INTR;
-
- if (sreg)
- return (sreg);
- else
- return 0;
-}
-
-/*
- * This seems to be OK for PIO at least ... usually 0 after PIO.
- */
-
-static int dma_bytes_sent(struct NCR_ESP * esp, int fifo_count)
-{
-
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma bytes sent = %x\n", fifo_count);
-#endif
-
- return fifo_count;
-}
-
-/*
- * dma_can_transfer is used to switch between DMA and PIO, if DMA (pseudo)
- * is ever implemented. Returning 0 here will use PIO.
- */
-
-static int dma_can_transfer(struct NCR_ESP * esp, Scsi_Cmnd * sp)
-{
- unsigned long sz = sp->SCp.this_residual;
-#if 0 /* no DMA yet; make conditional */
- if (sz > 0x10000000) {
- sz = 0x10000000;
- }
- printk("mac_esp: dma can transfer = 0lx%x\n", sz);
-#else
-
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: pio to transfer = %ld\n", sz);
-#endif
-
- sz = 0;
-#endif
- return sz;
-}
-
-/*
- * Not yet ...
- */
-
-static void dma_dump_state(struct NCR_ESP * esp)
-{
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_dump_state: called\n");
-#endif
-#if 0
- ESPLOG(("esp%d: dma -- cond_reg<%02x>\n",
- esp->esp_id, ((struct mac_dma_registers *)
- (esp->dregs))->cond_reg));
-#endif
-}
-
-/*
- * DMA setup: should be used to set up the ESP transfer count for pseudo
- * DMA transfers; need a DRQ transfer function to do the actual transfer
- */
-
-static void dma_init_read(struct NCR_ESP * esp, char * vaddress, int length)
-{
- printk("mac_esp: dma_init_read\n");
-}
-
-
-static void dma_init_write(struct NCR_ESP * esp, char * vaddress, int length)
-{
- printk("mac_esp: dma_init_write\n");
-}
-
-
-static void dma_ints_off(struct NCR_ESP * esp)
-{
- disable_irq(esp->irq);
-}
-
-
-static void dma_ints_on(struct NCR_ESP * esp)
-{
- enable_irq(esp->irq);
-}
-
-/*
- * generic dma_irq_p(), unused
- */
-
-static int dma_irq_p(struct NCR_ESP * esp)
-{
- int i = esp_read(esp->eregs->esp_status);
-
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_irq_p status %d\n", i);
-#endif
-
- return (i & ESP_STAT_INTR);
-}
-
-static int dma_irq_p_quick(struct NCR_ESP * esp)
-{
- /*
- * Copied from iosb_dma_irq_p()
- */
- int ret = mac_irq_pending(IRQ_MAC_SCSI) || mac_irq_pending(IRQ_MAC_SCSIDRQ);
- int sreg = esp_read(esp->eregs->esp_status);
-
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_irq_p drq %d irq %d sreg %x curr %p disc %p\n",
- mac_irq_pending(IRQ_MAC_SCSIDRQ), mac_irq_pending(IRQ_MAC_SCSI),
- sreg, esp->current_SC, esp->disconnected_SC);
-#endif
-
- sreg &= ESP_STAT_INTR;
-
- if (sreg)
- return (sreg);
- else
- return 0;
-
-}
-
-static void dma_led_off(struct NCR_ESP * esp)
-{
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_led_off: called\n");
-#endif
-}
-
-
-static void dma_led_on(struct NCR_ESP * esp)
-{
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_led_on: called\n");
-#endif
-}
-
-
-static int dma_ports_p(struct NCR_ESP * esp)
-{
- return 0;
-}
-
-
-static void dma_setup(struct NCR_ESP * esp, __u32 addr, int count, int write)
-{
-
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_setup\n");
-#endif
-
- if (write) {
- dma_init_read(esp, (char *) addr, count);
- } else {
- dma_init_write(esp, (char *) addr, count);
- }
-}
-
-
-static void dma_setup_quick(struct NCR_ESP * esp, __u32 addr, int count, int write)
-{
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_setup_quick\n");
-#endif
-}
-
-static struct scsi_host_template driver_template = {
- .proc_name = "mac_esp",
- .name = "Mac 53C9x SCSI",
- .detect = mac_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = mac_esp_release,
- .info = esp_info,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = DISABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/oktagon_esp.c b/drivers/scsi/oktagon_esp.c
deleted file mode 100644
index 8e5eadbd5c5..00000000000
--- a/drivers/scsi/oktagon_esp.c
+++ /dev/null
@@ -1,606 +0,0 @@
-/*
- * Oktagon_esp.c -- Driver for bsc Oktagon
- *
- * Written by Carsten Pluntke 1998
- *
- * Based on cyber_esp.c
- */
-
-
-#if defined(CONFIG_AMIGA) || defined(CONFIG_APUS)
-#define USE_BOTTOM_HALF
-#endif
-
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/reboot.h>
-#include <asm/system.h>
-#include <asm/ptrace.h>
-#include <asm/pgtable.h>
-
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "NCR53C9x.h"
-
-#include <linux/zorro.h>
-#include <asm/irq.h>
-#include <asm/amigaints.h>
-#include <asm/amigahw.h>
-
-#ifdef USE_BOTTOM_HALF
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#endif
-
-/* The controller registers can be found in the Z2 config area at these
- * offsets:
- */
-#define OKTAGON_ESP_ADDR 0x03000
-#define OKTAGON_DMA_ADDR 0x01000
-
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static void dma_led_off(struct NCR_ESP *esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-
-static void dma_irq_exit(struct NCR_ESP *esp);
-static void dma_invalidate(struct NCR_ESP *esp);
-
-static void dma_mmu_get_scsi_one(struct NCR_ESP *,Scsi_Cmnd *);
-static void dma_mmu_get_scsi_sgl(struct NCR_ESP *,Scsi_Cmnd *);
-static void dma_mmu_release_scsi_one(struct NCR_ESP *,Scsi_Cmnd *);
-static void dma_mmu_release_scsi_sgl(struct NCR_ESP *,Scsi_Cmnd *);
-static void dma_advance_sg(Scsi_Cmnd *);
-static int oktagon_notify_reboot(struct notifier_block *this, unsigned long code, void *x);
-
-#ifdef USE_BOTTOM_HALF
-static void dma_commit(struct work_struct *unused);
-
-long oktag_to_io(long *paddr, long *addr, long len);
-long oktag_from_io(long *addr, long *paddr, long len);
-
-static DECLARE_WORK(tq_fake_dma, dma_commit);
-
-#define DMA_MAXTRANSFER 0x8000
-
-#else
-
-/*
- * No bottom half. Use transfer directly from IRQ. Find a narrow path
- * between too much IRQ overhead and clogging the IRQ for too long.
- */
-
-#define DMA_MAXTRANSFER 0x1000
-
-#endif
-
-static struct notifier_block oktagon_notifier = {
- oktagon_notify_reboot,
- NULL,
- 0
-};
-
-static long *paddress;
-static long *address;
-static long len;
-static long dma_on;
-static int direction;
-static struct NCR_ESP *current_esp;
-
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are trasfered to the ESP chip
- * via PIO.
- */
-
-/***************************************************************** Detection */
-int oktagon_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- struct zorro_dev *z = NULL;
- unsigned long address;
- struct ESP_regs *eregs;
-
- while ((z = zorro_find_device(ZORRO_PROD_BSC_OKTAGON_2008, z))) {
- unsigned long board = z->resource.start;
- if (request_mem_region(board+OKTAGON_ESP_ADDR,
- sizeof(struct ESP_regs), "NCR53C9x")) {
- /*
- * It is a SCSI controller.
- * Hardwire Host adapter to SCSI ID 7
- */
-
- address = (unsigned long)ZTWO_VADDR(board);
- eregs = (struct ESP_regs *)(address + OKTAGON_ESP_ADDR);
-
- /* This line was 5 lines lower */
- esp = esp_allocate(tpnt, (void *)board + OKTAGON_ESP_ADDR, 0);
-
- /* we have to shift the registers only one bit for oktagon */
- esp->shift = 1;
-
- esp_write(eregs->esp_cfg1, (ESP_CONFIG1_PENABLE | 7));
- udelay(5);
- if (esp_read(eregs->esp_cfg1) != (ESP_CONFIG1_PENABLE | 7))
- return 0; /* Bail out if address did not hold data */
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = 0;
- esp->dma_invalidate = &dma_invalidate;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = &dma_irq_exit;
- esp->dma_led_on = &dma_led_on;
- esp->dma_led_off = &dma_led_off;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
-
- esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one;
- esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl;
- esp->dma_mmu_release_scsi_one = &dma_mmu_release_scsi_one;
- esp->dma_mmu_release_scsi_sgl = &dma_mmu_release_scsi_sgl;
- esp->dma_advance_sg = &dma_advance_sg;
-
- /* SCSI chip speed */
- /* Looking at the quartz of the SCSI board... */
- esp->cfreq = 25000000;
-
- /* The DMA registers on the CyberStorm are mapped
- * relative to the device (i.e. in the same Zorro
- * I/O block).
- */
- esp->dregs = (void *)(address + OKTAGON_DMA_ADDR);
-
- paddress = (long *) esp->dregs;
-
- /* ESP register base */
- esp->eregs = eregs;
-
- /* Set the command buffer */
- esp->esp_command = (volatile unsigned char*) cmd_buffer;
-
- /* Yes, the virtual address. See below. */
- esp->esp_command_dvma = (__u32) cmd_buffer;
-
- esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
- "BSC Oktagon SCSI", esp->ehost);
-
- /* Figure out our scsi ID on the bus */
- esp->scsi_id = 7;
-
- /* We don't have a differential SCSI-bus. */
- esp->diff = 0;
-
- esp_initialize(esp);
-
- printk("ESP_Oktagon Driver 1.1"
-#ifdef USE_BOTTOM_HALF
- " [BOTTOM_HALF]"
-#else
- " [IRQ]"
-#endif
- " registered.\n");
- printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps,esps_in_use);
- esps_running = esps_in_use;
- current_esp = esp;
- register_reboot_notifier(&oktagon_notifier);
- return esps_in_use;
- }
- }
- return 0;
-}
-
-
-/*
- * On certain configurations the SCSI equipment gets confused on reboot,
- * so we have to reset it then.
- */
-
-static int
-oktagon_notify_reboot(struct notifier_block *this, unsigned long code, void *x)
-{
- struct NCR_ESP *esp;
-
- if((code == SYS_DOWN || code == SYS_HALT) && (esp = current_esp))
- {
- esp_bootup_reset(esp,esp->eregs);
- udelay(500); /* Settle time. Maybe unnecessary. */
- }
- return NOTIFY_DONE;
-}
-
-
-
-#ifdef USE_BOTTOM_HALF
-
-
-/*
- * The bsc Oktagon controller has no real DMA, so we have to do the 'DMA
- * transfer' in the interrupt (Yikes!) or use a bottom half to not to clutter
- * IRQ's for longer-than-good.
- *
- * FIXME
- * BIG PROBLEM: 'len' is usually the buffer length, not the expected length
- * of the data. So DMA may finish prematurely, further reads lead to
- * 'machine check' on APUS systems (don't know about m68k systems, AmigaOS
- * deliberately ignores the bus faults) and a normal copy-loop can't
- * be exited prematurely just at the right moment by the dma_invalidate IRQ.
- * So do it the hard way, write an own copier in assembler and
- * catch the exception.
- * -- Carsten
- */
-
-
-static void dma_commit(struct work_struct *unused)
-{
- long wait,len2,pos;
- struct NCR_ESP *esp;
-
- ESPDATA(("Transfer: %ld bytes, Address 0x%08lX, Direction: %d\n",
- len,(long) address,direction));
- dma_ints_off(current_esp);
-
- pos = 0;
- wait = 1;
- if(direction) /* write? (memory to device) */
- {
- while(len > 0)
- {
- len2 = oktag_to_io(paddress, address+pos, len);
- if(!len2)
- {
- if(wait > 1000)
- {
- printk("Expedited DMA exit (writing) %ld\n",len);
- break;
- }
- mdelay(wait);
- wait *= 2;
- }
- pos += len2;
- len -= len2*sizeof(long);
- }
- } else {
- while(len > 0)
- {
- len2 = oktag_from_io(address+pos, paddress, len);
- if(!len2)
- {
- if(wait > 1000)
- {
- printk("Expedited DMA exit (reading) %ld\n",len);
- break;
- }
- mdelay(wait);
- wait *= 2;
- }
- pos += len2;
- len -= len2*sizeof(long);
- }
- }
-
- /* to make esp->shift work */
- esp=current_esp;
-
-#if 0
- len2 = (esp_read(current_esp->eregs->esp_tclow) & 0xff) |
- ((esp_read(current_esp->eregs->esp_tcmed) & 0xff) << 8);
-
- /*
- * Uh uh. If you see this, len and transfer count registers were out of
- * sync. That means really serious trouble.
- */
-
- if(len2)
- printk("Eeeek!! Transfer count still %ld!\n",len2);
-#endif
-
- /*
- * Normally we just need to exit and wait for the interrupt to come.
- * But at least one device (my Microtek ScanMaker 630) regularly mis-
- * calculates the bytes it should send which is really ugly because
- * it locks up the SCSI bus if not accounted for.
- */
-
- if(!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR))
- {
- long len = 100;
- long trash[10];
-
- /*
- * Interrupt bit was not set. Either the device is just plain lazy
- * so we give it a 10 ms chance or...
- */
- while(len-- && (!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR)))
- udelay(100);
-
-
- if(!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR))
- {
- /*
- * So we think that the transfer count is out of sync. Since we
- * have all we want we are happy and can ditch the trash.
- */
-
- len = DMA_MAXTRANSFER;
-
- while(len-- && (!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR)))
- oktag_from_io(trash,paddress,2);
-
- if(!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR))
- {
- /*
- * Things really have gone wrong. If we leave the system in that
- * state, the SCSI bus is locked forever. I hope that this will
- * turn the system in a more or less running state.
- */
- printk("Device is bolixed, trying bus reset...\n");
- esp_bootup_reset(current_esp,current_esp->eregs);
- }
- }
- }
-
- ESPDATA(("Transfer_finale: do_data_finale should come\n"));
-
- len = 0;
- dma_on = 0;
- dma_ints_on(current_esp);
-}
-
-#endif
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Since the CyberStorm DMA is fully dedicated to the ESP chip,
- * the number of bytes sent (to the ESP chip) equals the number
- * of bytes in the FIFO - there is no buffering in the DMA controller.
- * XXXX Do I read this right? It is from host to ESP, right?
- */
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- unsigned long sz = sp->SCp.this_residual;
- if(sz > DMA_MAXTRANSFER)
- sz = DMA_MAXTRANSFER;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
-}
-
-/*
- * What the f$@& is this?
- *
- * Some SCSI devices (like my Microtek ScanMaker 630 scanner) want to transfer
- * more data than requested. How much? Dunno. So ditch the bogus data into
- * the sink, hoping the device will advance to the next phase sooner or later.
- *
- * -- Carsten
- */
-
-static long oktag_eva_buffer[16]; /* The data sink */
-
-static void oktag_check_dma(void)
-{
- struct NCR_ESP *esp;
-
- esp=current_esp;
- if(!len)
- {
- address = oktag_eva_buffer;
- len = 2;
- /* esp_do_data sets them to zero like len */
- esp_write(current_esp->eregs->esp_tclow,2);
- esp_write(current_esp->eregs->esp_tcmed,0);
- }
-}
-
-static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length)
-{
- /* Zorro is noncached, everything else done using processor. */
- /* cache_clear(addr, length); */
-
- if(dma_on)
- panic("dma_init_read while dma process is initialized/running!\n");
- direction = 0;
- address = (long *) vaddress;
- current_esp = esp;
- len = length;
- oktag_check_dma();
- dma_on = 1;
-}
-
-static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length)
-{
- /* cache_push(addr, length); */
-
- if(dma_on)
- panic("dma_init_write while dma process is initialized/running!\n");
- direction = 1;
- address = (long *) vaddress;
- current_esp = esp;
- len = length;
- oktag_check_dma();
- dma_on = 1;
-}
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(esp->irq);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(esp->irq);
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- /* It's important to check the DMA IRQ bit in the correct way! */
- return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR);
-}
-
-static void dma_led_off(struct NCR_ESP *esp)
-{
-}
-
-static void dma_led_on(struct NCR_ESP *esp)
-{
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- return ((amiga_custom.intenar) & IF_PORTS);
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if(write){
- dma_init_read(esp, addr, count);
- } else {
- dma_init_write(esp, addr, count);
- }
-}
-
-/*
- * IRQ entry when DMA transfer is ready to be started
- */
-
-static void dma_irq_exit(struct NCR_ESP *esp)
-{
-#ifdef USE_BOTTOM_HALF
- if(dma_on)
- {
- schedule_work(&tq_fake_dma);
- }
-#else
- while(len && !dma_irq_p(esp))
- {
- if(direction)
- *paddress = *address++;
- else
- *address++ = *paddress;
- len -= (sizeof(long));
- }
- len = 0;
- dma_on = 0;
-#endif
-}
-
-/*
- * IRQ entry when DMA has just finished
- */
-
-static void dma_invalidate(struct NCR_ESP *esp)
-{
-}
-
-/*
- * Since the processor does the data transfer we have to use the custom
- * mmu interface to pass the virtual address, not the physical.
- */
-
-void dma_mmu_get_scsi_one(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- sp->SCp.ptr =
- sp->request_buffer;
-}
-
-void dma_mmu_get_scsi_sgl(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- sp->SCp.ptr = sg_virt(sp->SCp.buffer);
-}
-
-void dma_mmu_release_scsi_one(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
-}
-
-void dma_mmu_release_scsi_sgl(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
-}
-
-void dma_advance_sg(Scsi_Cmnd *sp)
-{
- sp->SCp.ptr = sg_virt(sp->SCp.buffer);
-}
-
-
-#define HOSTS_C
-
-int oktagon_esp_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
- esp_release();
- release_mem_region(address, sizeof(struct ESP_regs));
- free_irq(IRQ_AMIGA_PORTS, esp_intr);
- unregister_reboot_notifier(&oktagon_notifier);
-#endif
- return 1;
-}
-
-
-static struct scsi_host_template driver_template = {
- .proc_name = "esp-oktagon",
- .proc_info = &esp_proc_info,
- .name = "BSC Oktagon SCSI",
- .detect = oktagon_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = oktagon_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/oktagon_io.S b/drivers/scsi/oktagon_io.S
deleted file mode 100644
index 8a7340b0270..00000000000
--- a/drivers/scsi/oktagon_io.S
+++ /dev/null
@@ -1,194 +0,0 @@
-/* -*- mode: asm -*-
- * Due to problems while transferring data I've put these routines as assembly
- * code.
- * Since I'm no PPC assembler guru, the code is just the assembler version of
-
-int oktag_to_io(long *paddr,long *addr,long len)
-{
- long *addr2 = addr;
- for(len=(len+sizeof(long)-1)/sizeof(long);len--;)
- *paddr = *addr2++;
- return addr2 - addr;
-}
-
-int oktag_from_io(long *addr,long *paddr,long len)
-{
- long *addr2 = addr;
- for(len=(len+sizeof(long)-1)/sizeof(long);len--;)
- *addr2++ = *paddr;
- return addr2 - addr;
-}
-
- * assembled using gcc -O2 -S, with two exception catch points where data
- * is moved to/from the IO register.
- */
-
-
-#ifdef CONFIG_APUS
-
- .file "oktagon_io.c"
-
-gcc2_compiled.:
-/*
- .section ".text"
-*/
- .align 2
- .globl oktag_to_io
- .type oktag_to_io,@function
-oktag_to_io:
- addi 5,5,3
- srwi 5,5,2
- cmpwi 1,5,0
- mr 9,3
- mr 3,4
- addi 5,5,-1
- bc 12,6,.L3
-.L5:
- cmpwi 1,5,0
- lwz 0,0(3)
- addi 3,3,4
- addi 5,5,-1
-exp1: stw 0,0(9)
- bc 4,6,.L5
-.L3:
-ret1: subf 3,4,3
- srawi 3,3,2
- blr
-.Lfe1:
- .size oktag_to_io,.Lfe1-oktag_to_io
- .align 2
- .globl oktag_from_io
- .type oktag_from_io,@function
-oktag_from_io:
- addi 5,5,3
- srwi 5,5,2
- cmpwi 1,5,0
- mr 9,3
- addi 5,5,-1
- bc 12,6,.L9
-.L11:
- cmpwi 1,5,0
-exp2: lwz 0,0(4)
- addi 5,5,-1
- stw 0,0(3)
- addi 3,3,4
- bc 4,6,.L11
-.L9:
-ret2: subf 3,9,3
- srawi 3,3,2
- blr
-.Lfe2:
- .size oktag_from_io,.Lfe2-oktag_from_io
- .ident "GCC: (GNU) egcs-2.90.29 980515 (egcs-1.0.3 release)"
-
-/*
- * Exception table.
- * Second longword shows where to jump when an exception at the addr the first
- * longword is pointing to is caught.
- */
-
-.section __ex_table,"a"
- .align 2
-oktagon_except:
- .long exp1,ret1
- .long exp2,ret2
-
-#else
-
-/*
-The code which follows is for 680x0 based assembler and is meant for
-Linux/m68k. It was created by cross compiling the code using the
-instructions given above. I then added the four labels used in the
-exception handler table at the bottom of this file.
-- Kevin <kcozens@interlog.com>
-*/
-
-#ifdef CONFIG_AMIGA
-
- .file "oktagon_io.c"
- .version "01.01"
-gcc2_compiled.:
-.text
- .align 2
-.globl oktag_to_io
- .type oktag_to_io,@function
-oktag_to_io:
- link.w %a6,#0
- move.l %d2,-(%sp)
- move.l 8(%a6),%a1
- move.l 12(%a6),%d1
- move.l %d1,%a0
- move.l 16(%a6),%d0
- addq.l #3,%d0
- lsr.l #2,%d0
- subq.l #1,%d0
- moveq.l #-1,%d2
- cmp.l %d0,%d2
- jbeq .L3
-.L5:
-exp1:
- move.l (%a0)+,(%a1)
- dbra %d0,.L5
- clr.w %d0
- subq.l #1,%d0
- jbcc .L5
-.L3:
-ret1:
- move.l %a0,%d0
- sub.l %d1,%d0
- asr.l #2,%d0
- move.l -4(%a6),%d2
- unlk %a6
- rts
-
-.Lfe1:
- .size oktag_to_io,.Lfe1-oktag_to_io
- .align 2
-.globl oktag_from_io
- .type oktag_from_io,@function
-oktag_from_io:
- link.w %a6,#0
- move.l %d2,-(%sp)
- move.l 8(%a6),%d1
- move.l 12(%a6),%a1
- move.l %d1,%a0
- move.l 16(%a6),%d0
- addq.l #3,%d0
- lsr.l #2,%d0
- subq.l #1,%d0
- moveq.l #-1,%d2
- cmp.l %d0,%d2
- jbeq .L9
-.L11:
-exp2:
- move.l (%a1),(%a0)+
- dbra %d0,.L11
- clr.w %d0
- subq.l #1,%d0
- jbcc .L11
-.L9:
-ret2:
- move.l %a0,%d0
- sub.l %d1,%d0
- asr.l #2,%d0
- move.l -4(%a6),%d2
- unlk %a6
- rts
-.Lfe2:
- .size oktag_from_io,.Lfe2-oktag_from_io
- .ident "GCC: (GNU) 2.7.2.1"
-
-/*
- * Exception table.
- * Second longword shows where to jump when an exception at the addr the first
- * longword is pointing to is caught.
- */
-
-.section __ex_table,"a"
- .align 2
-oktagon_except:
- .long exp1,ret1
- .long exp2,ret2
-
-#endif
-#endif