aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDon Mullis <dwm@meer.net>2006-12-10 02:18:37 -0800
committerLinus Torvalds <torvalds@woody.osdl.org>2006-12-10 09:55:39 -0800
commitbf4735a46a6b8dfc1a951f05683e80374d8baa70 (patch)
tree6ac5cafb9e3287446549a56161ca6843cf60377e
parentd53ef07ab45085c0b06b652d588aa49b8ba41458 (diff)
[PATCH] Kconfig refactoring for better menu nesting
Refactor Kconfig content to maximize nesting of menus by menuconfig and xconfig. Tested by simultaneously running `make xconfig` with and without patch, and comparing displays. Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-rw-r--r--drivers/parport/Kconfig6
-rw-r--r--drivers/pci/hotplug/Kconfig3
-rw-r--r--drivers/serial/Kconfig53
-rw-r--r--lib/Kconfig.debug49
4 files changed, 56 insertions, 55 deletions
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index c7fa28a28b9..36c6a1bfe55 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -82,9 +82,6 @@ config PARPORT_PC_PCMCIA
Say Y here if you need PCMCIA support for your PC-style parallel
ports. If unsure, say N.
-config PARPORT_NOT_PC
- bool
-
config PARPORT_IP32
tristate "SGI IP32 builtin port (EXPERIMENTAL)"
depends on SGI_IP32 && PARPORT && EXPERIMENTAL
@@ -158,5 +155,8 @@ config PARPORT_1284
transfer modes. Also say Y if you want device ID information to
appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
+config PARPORT_NOT_PC
+ bool
+
endmenu
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 6e780db9454..adce4204d87 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -76,7 +76,8 @@ config HOTPLUG_PCI_IBM
config HOTPLUG_PCI_ACPI
tristate "ACPI PCI Hotplug driver"
- depends on (!ACPI_DOCK && ACPI && HOTPLUG_PCI) || (ACPI_DOCK && HOTPLUG_PCI)
+ depends on HOTPLUG_PCI
+ depends on (!ACPI_DOCK && ACPI) || (ACPI_DOCK)
help
Say Y here if you have a system that supports PCI Hotplug using
ACPI.
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index fc12d5df10e..0b36dd5cdac 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -151,32 +151,6 @@ config SERIAL_8250_MANY_PORTS
say N here to save some memory. You can also say Y if you have an
"intelligent" multiport card such as Cyclades, Digiboards, etc.
-config SERIAL_8250_SHARE_IRQ
- bool "Support for sharing serial interrupts"
- depends on SERIAL_8250_EXTENDED
- help
- Some serial boards have hardware support which allows multiple dumb
- serial ports on the same board to share a single IRQ. To enable
- support for this in the serial driver, say Y here.
-
-config SERIAL_8250_DETECT_IRQ
- bool "Autodetect IRQ on standard ports (unsafe)"
- depends on SERIAL_8250_EXTENDED
- help
- Say Y here if you want the kernel to try to guess which IRQ
- to use for your serial port.
-
- This is considered unsafe; it is far better to configure the IRQ in
- a boot script using the setserial command.
-
- If unsure, say N.
-
-config SERIAL_8250_RSA
- bool "Support RSA serial ports"
- depends on SERIAL_8250_EXTENDED
- help
- ::: To be written :::
-
#
# Multi-port serial cards
#
@@ -199,7 +173,6 @@ config SERIAL_8250_ACCENT
To compile this driver as a module, choose M here: the module
will be called 8250_accent.
-
config SERIAL_8250_BOCA
tristate "Support Boca cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
@@ -230,6 +203,32 @@ config SERIAL_8250_HUB6
To compile this driver as a module, choose M here: the module
will be called 8250_hub6.
+config SERIAL_8250_SHARE_IRQ
+ bool "Support for sharing serial interrupts"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Some serial boards have hardware support which allows multiple dumb
+ serial ports on the same board to share a single IRQ. To enable
+ support for this in the serial driver, say Y here.
+
+config SERIAL_8250_DETECT_IRQ
+ bool "Autodetect IRQ on standard ports (unsafe)"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Say Y here if you want the kernel to try to guess which IRQ
+ to use for your serial port.
+
+ This is considered unsafe; it is far better to configure the IRQ in
+ a boot script using the setserial command.
+
+ If unsure, say N.
+
+config SERIAL_8250_RSA
+ bool "Support RSA serial ports"
+ depends on SERIAL_8250_EXTENDED
+ help
+ ::: To be written :::
+
config SERIAL_8250_MCA
tristate "Support 8250-type ports on MCA buses"
depends on SERIAL_8250 != n && MCA
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 6eccc643c32..0701ddda1df 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -47,6 +47,30 @@ config UNUSED_SYMBOLS
you really need it, and what the merge plan to the mainline kernel for
your module is.
+config DEBUG_FS
+ bool "Debug Filesystem"
+ depends on SYSFS
+ help
+ debugfs is a virtual file system that kernel developers use to put
+ debugging files into. Enable this option to be able to read and
+ write to these files.
+
+ If unsure, say N.
+
+config HEADERS_CHECK
+ bool "Run 'make headers_check' when building vmlinux"
+ depends on !UML
+ help
+ This option will extract the user-visible kernel headers whenever
+ building the kernel, and will run basic sanity checks on them to
+ ensure that exported files do not attempt to include files which
+ were not exported, etc.
+
+ If you're making modifications to header files which are
+ relevant for userspace, say 'Y', and check the headers
+ exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in
+ your build tree), to make sure they're suitable.
+
config DEBUG_KERNEL
bool "Kernel debugging"
help
@@ -302,16 +326,6 @@ config DEBUG_INFO
If unsure, say N.
-config DEBUG_FS
- bool "Debug Filesystem"
- depends on SYSFS
- help
- debugfs is a virtual file system that kernel developers use to put
- debugging files into. Enable this option to be able to read and
- write to these files.
-
- If unsure, say N.
-
config DEBUG_VM
bool "Debug VM"
depends on DEBUG_KERNEL
@@ -372,20 +386,6 @@ config FORCED_INLINING
become the default in the future, until then this option is there to
test gcc for this.
-config HEADERS_CHECK
- bool "Run 'make headers_check' when building vmlinux"
- depends on !UML
- help
- This option will extract the user-visible kernel headers whenever
- building the kernel, and will run basic sanity checks on them to
- ensure that exported files do not attempt to include files which
- were not exported, etc.
-
- If you're making modifications to header files which are
- relevant for userspace, say 'Y', and check the headers
- exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in
- your build tree), to make sure they're suitable.
-
config RCU_TORTURE_TEST
tristate "torture tests for RCU"
depends on DEBUG_KERNEL
@@ -402,6 +402,7 @@ config RCU_TORTURE_TEST
config LKDTM
tristate "Linux Kernel Dump Test Tool Module"
+ depends on DEBUG_KERNEL
depends on KPROBES
default n
help