aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJack Morgenstein <jackm@dev.mellanox.co.il>2008-01-28 10:40:59 +0200
committerRoland Dreier <rolandd@cisco.com>2008-02-08 13:30:02 -0800
commitea54b10c7773007e173da31fe7adcc049da33331 (patch)
treeb13b77fb3807071a5b93ece7b564f6748d962bbc
parentb57aacfa7a95328f469d0360e49289b023c47e9e (diff)
IB/mlx4: Use multiple WQ blocks to post smaller send WQEs
ConnectX HCA supports shrinking WQEs, so that a single work request can be made of multiple units of wqe_shift. This way, WRs can differ in size, and do not have to be a power of 2 in size, saving memory and speeding up send WR posting. Unfortunately, if we do this then the wqe_index field in CQEs can't be used to look up the WR ID anymore, so our implementation does this only if selective signaling is off. Further, on 32-bit platforms, we can't use vmap() to make the QP buffer virtually contigious. Thus we have to use constant-sized WRs to make sure a WR is always fully within a single page-sized chunk. Finally, we use WRs with the NOP opcode to avoid wrapping around the queue buffer in the middle of posting a WR, and we set the NoErrorCompletion bit to avoid getting completions with error for NOP WRs. However, NEC is only supported starting with firmware 2.2.232, so we use constant-sized WRs for older firmware. And, since MLX QPs only support SEND, we use constant-sized WRs in this case. When stamping during NOP posting, do stamping following setting of the NOP WQE valid bit. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-rw-r--r--drivers/infiniband/hw/mlx4/cq.c12
-rw-r--r--drivers/infiniband/hw/mlx4/mlx4_ib.h2
-rw-r--r--drivers/infiniband/hw/mlx4/qp.c210
-rw-r--r--include/linux/mlx4/device.h5
-rw-r--r--include/linux/mlx4/qp.h4
5 files changed, 197 insertions, 36 deletions
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index 8ac7b973f87..7360bbafbe8 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -326,6 +326,12 @@ static int mlx4_ib_poll_one(struct mlx4_ib_cq *cq,
is_error = (cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) ==
MLX4_CQE_OPCODE_ERROR;
+ if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == MLX4_OPCODE_NOP &&
+ is_send)) {
+ printk(KERN_WARNING "Completion for NOP opcode detected!\n");
+ return -EINVAL;
+ }
+
if (!*cur_qp ||
(be32_to_cpu(cqe->my_qpn) & 0xffffff) != (*cur_qp)->mqp.qpn) {
/*
@@ -348,8 +354,10 @@ static int mlx4_ib_poll_one(struct mlx4_ib_cq *cq,
if (is_send) {
wq = &(*cur_qp)->sq;
- wqe_ctr = be16_to_cpu(cqe->wqe_index);
- wq->tail += (u16) (wqe_ctr - (u16) wq->tail);
+ if (!(*cur_qp)->sq_signal_bits) {
+ wqe_ctr = be16_to_cpu(cqe->wqe_index);
+ wq->tail += (u16) (wqe_ctr - (u16) wq->tail);
+ }
wc->wr_id = wq->wrid[wq->tail & (wq->wqe_cnt - 1)];
++wq->tail;
} else if ((*cur_qp)->ibqp.srq) {
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index 28697653a37..3726e451a32 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -120,6 +120,8 @@ struct mlx4_ib_qp {
u32 doorbell_qpn;
__be32 sq_signal_bits;
+ unsigned sq_next_wqe;
+ int sq_max_wqes_per_wr;
int sq_spare_wqes;
struct mlx4_ib_wq sq;
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 376db730bc7..958e205b6d7 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -30,6 +30,8 @@
* SOFTWARE.
*/
+#include <linux/log2.h>
+
#include <rdma/ib_cache.h>
#include <rdma/ib_pack.h>
@@ -111,16 +113,87 @@ static void *get_send_wqe(struct mlx4_ib_qp *qp, int n)
/*
* Stamp a SQ WQE so that it is invalid if prefetched by marking the
- * first four bytes of every 64 byte chunk with 0xffffffff, except for
- * the very first chunk of the WQE.
+ * first four bytes of every 64 byte chunk with
+ * 0x7FFFFFF | (invalid_ownership_value << 31).
+ *
+ * When the max work request size is less than or equal to the WQE
+ * basic block size, as an optimization, we can stamp all WQEs with
+ * 0xffffffff, and skip the very first chunk of each WQE.
*/
-static void stamp_send_wqe(struct mlx4_ib_qp *qp, int n)
+static void stamp_send_wqe(struct mlx4_ib_qp *qp, int n, int size)
{
- u32 *wqe = get_send_wqe(qp, n);
+ u32 *wqe;
int i;
+ int s;
+ int ind;
+ void *buf;
+ __be32 stamp;
+
+ s = roundup(size, 1U << qp->sq.wqe_shift);
+ if (qp->sq_max_wqes_per_wr > 1) {
+ for (i = 0; i < s; i += 64) {
+ ind = (i >> qp->sq.wqe_shift) + n;
+ stamp = ind & qp->sq.wqe_cnt ? cpu_to_be32(0x7fffffff) :
+ cpu_to_be32(0xffffffff);
+ buf = get_send_wqe(qp, ind & (qp->sq.wqe_cnt - 1));
+ wqe = buf + (i & ((1 << qp->sq.wqe_shift) - 1));
+ *wqe = stamp;
+ }
+ } else {
+ buf = get_send_wqe(qp, n & (qp->sq.wqe_cnt - 1));
+ for (i = 64; i < s; i += 64) {
+ wqe = buf + i;
+ *wqe = 0xffffffff;
+ }
+ }
+}
+
+static void post_nop_wqe(struct mlx4_ib_qp *qp, int n, int size)
+{
+ struct mlx4_wqe_ctrl_seg *ctrl;
+ struct mlx4_wqe_inline_seg *inl;
+ void *wqe;
+ int s;
+
+ ctrl = wqe = get_send_wqe(qp, n & (qp->sq.wqe_cnt - 1));
+ s = sizeof(struct mlx4_wqe_ctrl_seg);
+
+ if (qp->ibqp.qp_type == IB_QPT_UD) {
+ struct mlx4_wqe_datagram_seg *dgram = wqe + sizeof *ctrl;
+ struct mlx4_av *av = (struct mlx4_av *)dgram->av;
+ memset(dgram, 0, sizeof *dgram);
+ av->port_pd = cpu_to_be32((qp->port << 24) | to_mpd(qp->ibqp.pd)->pdn);
+ s += sizeof(struct mlx4_wqe_datagram_seg);
+ }
+
+ /* Pad the remainder of the WQE with an inline data segment. */
+ if (size > s) {
+ inl = wqe + s;
+ inl->byte_count = cpu_to_be32(1 << 31 | (size - s - sizeof *inl));
+ }
+ ctrl->srcrb_flags = 0;
+ ctrl->fence_size = size / 16;
+ /*
+ * Make sure descriptor is fully written before setting ownership bit
+ * (because HW can start executing as soon as we do).
+ */
+ wmb();
+
+ ctrl->owner_opcode = cpu_to_be32(MLX4_OPCODE_NOP | MLX4_WQE_CTRL_NEC) |
+ (n & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0);
- for (i = 16; i < 1 << (qp->sq.wqe_shift - 2); i += 16)
- wqe[i] = 0xffffffff;
+ stamp_send_wqe(qp, n + qp->sq_spare_wqes, size);
+}
+
+/* Post NOP WQE to prevent wrap-around in the middle of WR */
+static inline unsigned pad_wraparound(struct mlx4_ib_qp *qp, int ind)
+{
+ unsigned s = qp->sq.wqe_cnt - (ind & (qp->sq.wqe_cnt - 1));
+ if (unlikely(s < qp->sq_max_wqes_per_wr)) {
+ post_nop_wqe(qp, ind, s << qp->sq.wqe_shift);
+ ind += s;
+ }
+ return ind;
}
static void mlx4_ib_qp_event(struct mlx4_qp *qp, enum mlx4_event type)
@@ -237,6 +310,8 @@ static int set_rq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,
static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,
enum ib_qp_type type, struct mlx4_ib_qp *qp)
{
+ int s;
+
/* Sanity check SQ size before proceeding */
if (cap->max_send_wr > dev->dev->caps.max_wqes ||
cap->max_send_sge > dev->dev->caps.max_sq_sg ||
@@ -252,20 +327,74 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,
cap->max_send_sge + 2 > dev->dev->caps.max_sq_sg)
return -EINVAL;
- qp->sq.wqe_shift = ilog2(roundup_pow_of_two(max(cap->max_send_sge *
- sizeof (struct mlx4_wqe_data_seg),
- cap->max_inline_data +
- sizeof (struct mlx4_wqe_inline_seg)) +
- send_wqe_overhead(type)));
- qp->sq.max_gs = ((1 << qp->sq.wqe_shift) - send_wqe_overhead(type)) /
- sizeof (struct mlx4_wqe_data_seg);
+ s = max(cap->max_send_sge * sizeof (struct mlx4_wqe_data_seg),
+ cap->max_inline_data + sizeof (struct mlx4_wqe_inline_seg)) +
+ send_wqe_overhead(type);
/*
- * We need to leave 2 KB + 1 WQE of headroom in the SQ to
- * allow HW to prefetch.
+ * Hermon supports shrinking WQEs, such that a single work
+ * request can include multiple units of 1 << wqe_shift. This
+ * way, work requests can differ in size, and do not have to
+ * be a power of 2 in size, saving memory and speeding up send
+ * WR posting. Unfortunately, if we do this then the
+ * wqe_index field in CQEs can't be used to look up the WR ID
+ * anymore, so we do this only if selective signaling is off.
+ *
+ * Further, on 32-bit platforms, we can't use vmap() to make
+ * the QP buffer virtually contigious. Thus we have to use
+ * constant-sized WRs to make sure a WR is always fully within
+ * a single page-sized chunk.
+ *
+ * Finally, we use NOP work requests to pad the end of the
+ * work queue, to avoid wrap-around in the middle of WR. We
+ * set NEC bit to avoid getting completions with error for
+ * these NOP WRs, but since NEC is only supported starting
+ * with firmware 2.2.232, we use constant-sized WRs for older
+ * firmware.
+ *
+ * And, since MLX QPs only support SEND, we use constant-sized
+ * WRs in this case.
+ *
+ * We look for the smallest value of wqe_shift such that the
+ * resulting number of wqes does not exceed device
+ * capabilities.
+ *
+ * We set WQE size to at least 64 bytes, this way stamping
+ * invalidates each WQE.
*/
- qp->sq_spare_wqes = (2048 >> qp->sq.wqe_shift) + 1;
- qp->sq.wqe_cnt = roundup_pow_of_two(cap->max_send_wr + qp->sq_spare_wqes);
+ if (dev->dev->caps.fw_ver >= MLX4_FW_VER_WQE_CTRL_NEC &&
+ qp->sq_signal_bits && BITS_PER_LONG == 64 &&
+ type != IB_QPT_SMI && type != IB_QPT_GSI)
+ qp->sq.wqe_shift = ilog2(64);
+ else
+ qp->sq.wqe_shift = ilog2(roundup_pow_of_two(s));
+
+ for (;;) {
+ if (1 << qp->sq.wqe_shift > dev->dev->caps.max_sq_desc_sz)
+ return -EINVAL;
+
+ qp->sq_max_wqes_per_wr = DIV_ROUND_UP(s, 1U << qp->sq.wqe_shift);
+
+ /*
+ * We need to leave 2 KB + 1 WR of headroom in the SQ to
+ * allow HW to prefetch.
+ */
+ qp->sq_spare_wqes = (2048 >> qp->sq.wqe_shift) + qp->sq_max_wqes_per_wr;
+ qp->sq.wqe_cnt = roundup_pow_of_two(cap->max_send_wr *
+ qp->sq_max_wqes_per_wr +
+ qp->sq_spare_wqes);
+
+ if (qp->sq.wqe_cnt <= dev->dev->caps.max_wqes)
+ break;
+
+ if (qp->sq_max_wqes_per_wr <= 1)
+ return -EINVAL;
+
+ ++qp->sq.wqe_shift;
+ }
+
+ qp->sq.max_gs = ((qp->sq_max_wqes_per_wr << qp->sq.wqe_shift) -
+ send_wqe_overhead(type)) / sizeof (struct mlx4_wqe_data_seg);
qp->buf_size = (qp->rq.wqe_cnt << qp->rq.wqe_shift) +
(qp->sq.wqe_cnt << qp->sq.wqe_shift);
@@ -277,7 +406,8 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,
qp->sq.offset = 0;
}
- cap->max_send_wr = qp->sq.max_post = qp->sq.wqe_cnt - qp->sq_spare_wqes;
+ cap->max_send_wr = qp->sq.max_post =
+ (qp->sq.wqe_cnt - qp->sq_spare_wqes) / qp->sq_max_wqes_per_wr;
cap->max_send_sge = qp->sq.max_gs;
/* We don't support inline sends for kernel QPs (yet) */
cap->max_inline_data = 0;
@@ -323,6 +453,12 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd,
qp->rq.tail = 0;
qp->sq.head = 0;
qp->sq.tail = 0;
+ qp->sq_next_wqe = 0;
+
+ if (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR)
+ qp->sq_signal_bits = cpu_to_be32(MLX4_WQE_CTRL_CQ_UPDATE);
+ else
+ qp->sq_signal_bits = 0;
err = set_rq_size(dev, &init_attr->cap, !!pd->uobject, !!init_attr->srq, qp);
if (err)
@@ -413,11 +549,6 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd,
*/
qp->doorbell_qpn = swab32(qp->mqp.qpn << 8);
- if (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR)
- qp->sq_signal_bits = cpu_to_be32(MLX4_WQE_CTRL_CQ_UPDATE);
- else
- qp->sq_signal_bits = 0;
-
qp->mqp.event = mlx4_ib_qp_event;
return 0;
@@ -912,7 +1043,7 @@ static int __mlx4_ib_modify_qp(struct ib_qp *ibqp,
ctrl = get_send_wqe(qp, i);
ctrl->owner_opcode = cpu_to_be32(1 << 31);
- stamp_send_wqe(qp, i);
+ stamp_send_wqe(qp, i, 1 << qp->sq.wqe_shift);
}
}
@@ -965,6 +1096,7 @@ static int __mlx4_ib_modify_qp(struct ib_qp *ibqp,
qp->rq.tail = 0;
qp->sq.head = 0;
qp->sq.tail = 0;
+ qp->sq_next_wqe = 0;
if (!ibqp->srq)
*qp->db.db = 0;
}
@@ -1274,13 +1406,14 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
unsigned long flags;
int nreq;
int err = 0;
- int ind;
- int size;
+ unsigned ind;
+ int uninitialized_var(stamp);
+ int uninitialized_var(size);
int i;
spin_lock_irqsave(&qp->sq.lock, flags);
- ind = qp->sq.head;
+ ind = qp->sq_next_wqe;
for (nreq = 0; wr; ++nreq, wr = wr->next) {
if (mlx4_wq_overflow(&qp->sq, nreq, qp->ibqp.send_cq)) {
@@ -1296,7 +1429,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
}
ctrl = wqe = get_send_wqe(qp, ind & (qp->sq.wqe_cnt - 1));
- qp->sq.wrid[ind & (qp->sq.wqe_cnt - 1)] = wr->wr_id;
+ qp->sq.wrid[(qp->sq.head + nreq) & (qp->sq.wqe_cnt - 1)] = wr->wr_id;
ctrl->srcrb_flags =
(wr->send_flags & IB_SEND_SIGNALED ?
@@ -1409,16 +1542,23 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
(ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0);
+ stamp = ind + qp->sq_spare_wqes;
+ ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);
+
/*
* We can improve latency by not stamping the last
* send queue WQE until after ringing the doorbell, so
* only stamp here if there are still more WQEs to post.
+ *
+ * Same optimization applies to padding with NOP wqe
+ * in case of WQE shrinking (used to prevent wrap-around
+ * in the middle of WR).
*/
- if (wr->next)
- stamp_send_wqe(qp, (ind + qp->sq_spare_wqes) &
- (qp->sq.wqe_cnt - 1));
+ if (wr->next) {
+ stamp_send_wqe(qp, stamp, size * 16);
+ ind = pad_wraparound(qp, ind);
+ }
- ++ind;
}
out:
@@ -1440,8 +1580,10 @@ out:
*/
mmiowb();
- stamp_send_wqe(qp, (ind + qp->sq_spare_wqes - 1) &
- (qp->sq.wqe_cnt - 1));
+ stamp_send_wqe(qp, stamp, size * 16);
+
+ ind = pad_wraparound(qp, ind);
+ qp->sq_next_wqe = ind;
}
spin_unlock_irqrestore(&qp->sq.lock, flags);
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 4210ac4a8bc..6cdf813cd47 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -133,6 +133,11 @@ enum {
MLX4_STAT_RATE_OFFSET = 5
};
+static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
+{
+ return (major << 32) | (minor << 16) | subminor;
+}
+
struct mlx4_caps {
u64 fw_ver;
int num_ports;
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 3968b943259..09a2230923f 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -154,7 +154,11 @@ struct mlx4_qp_context {
u32 reserved5[10];
};
+/* Which firmware version adds support for NEC (NoErrorCompletion) bit */
+#define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232)
+
enum {
+ MLX4_WQE_CTRL_NEC = 1 << 29,
MLX4_WQE_CTRL_FENCE = 1 << 6,
MLX4_WQE_CTRL_CQ_UPDATE = 3 << 2,
MLX4_WQE_CTRL_SOLICITED = 1 << 1,