aboutsummaryrefslogtreecommitdiff
path: root/Documentation/hwmon
diff options
context:
space:
mode:
authorMarc Hulsman <m.hulsman@tudelft.nl>2008-10-17 17:51:17 +0200
committerJean Delvare <khali@mahadeva.delvare>2008-10-17 17:51:17 +0200
commita5a4598cd2e7cae456a7f2a100bf0e5c3c7811c7 (patch)
treed2a5da96eae842f33bea66101a92abf88612aa9f /Documentation/hwmon
parentb5938f8c4a530b2fad18f2293ffaf79ac9f5a148 (diff)
hwmon: (w83791d) add support for thermal cruise mode
Add support to set target temperature and tolerance for thermal cruise mode. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Diffstat (limited to 'Documentation/hwmon')
-rw-r--r--Documentation/hwmon/w83791d19
1 files changed, 14 insertions, 5 deletions
diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d
index b1e4798764e..5663e491655 100644
--- a/Documentation/hwmon/w83791d
+++ b/Documentation/hwmon/w83791d
@@ -77,6 +77,9 @@ readings can be divided by a programmable divider (1, 2, 4, 8, 16,
Each fan controlled is controlled by PWM. The PWM duty cycle can be read and
set for each fan separately. Valid values range from 0 (stop) to 255 (full).
+PWM 1-3 support Thermal Cruise mode, in which the PWMs are automatically
+regulated to keep respectively temp 1-3 at a certain target temperature.
+See below for the description of the sysfs-interface.
The w83791d has a global bit used to enable beeping from the speaker when an
alarm is triggered as well as a bitmask to enable or disable the beep for
@@ -116,9 +119,19 @@ chip-specific options are documented here.
pwm[1-3]_enable - this file controls mode of fan/temperature control for
fan 1-3. Fan/PWM 4-5 only support manual mode.
* 1 Manual mode
- * 2 Thermal Cruise mode (no further support)
+ * 2 Thermal Cruise mode
* 3 Fan Speed Cruise mode (no further support)
+temp[1-3]_target - defines the target temperature for Thermal Cruise mode.
+ Unit: millidegree Celsius
+ RW
+
+temp[1-3]_tolerance - temperature tolerance for Thermal Cruise mode.
+ Specifies an interval around the target temperature
+ in which the fan speed is not changed.
+ Unit: millidegree Celsius
+ RW
+
Alarms bitmap vs. beep_mask bitmask
------------------------------------
For legacy code using the alarms and beep_mask files:
@@ -146,7 +159,3 @@ tart2 : alarms: 0x020000 beep_mask: 0x080000 <== mismatch
tart3 : alarms: 0x040000 beep_mask: 0x100000 <== mismatch
case_open : alarms: 0x001000 beep_mask: 0x001000
global_enable: alarms: -------- beep_mask: 0x800000 (modified via beep_enable)
-
-W83791D TODO:
----------------
-Provide a patch for Thermal Cruise registers.