[ARM] 4982/1: [AT91] Drop old-style UART initialization (Part 1)

All the SAM9 boards supported by mainline and the AT91 patches have
been converted to the new-style UART initialization.  Therefore drop
support for the old at91_init_serial() interface for SAM9.

at91_uarts[] array can also be marked as __initdata.

The warning that no serial-console is defined moved from
at91_set_serial_console() to at91_add_device_serial() since the whole
point is the board-specific file is not calling
at91_set_serial_console().

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 4 insertions, 47 deletions

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index c81842c0270..b6454c52596 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -975,9 +975,6 @@ static inline void configure_ssc1_pins(unsigned pins)
 }
 
 /*
- * Return the device node so that board init code can use it as the
- * parent for the device node reflecting how it's used on this board.
- *
  * SSC controllers are accessed through library code, instead of any
  * kind of all-singing/all-dancing driver.  For example one could be
  * used by a particular I2S audio codec's driver, while another one
@@ -1188,49 +1185,9 @@ static inline void configure_usart2_pins(unsigned pins)
 		at91_set_B_periph(AT91_PIN_PD6, 0);	/* CTS2 */
 }
 
-static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9263_uart0_device;
-				at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9263_uart1_device;
-				at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9263_uart2_device;
-				at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91sam9263_dbgu_device;
-				at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
@@ -1269,8 +1226,6 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART)
 		atmel_default_console_device = at91_uarts[portnr];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 
 void __init at91_add_device_serial(void)
@@ -1281,9 +1236,11 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}