[ARM] 3995/1: iop13xx: add iop13xx support

The iop348 processor integrates an Xscale (XSC3 512KB L2 Cache) core with a
Serial Attached SCSI (SAS) controller, multi-ported DDR2 memory
controller, 3 Application Direct Memory Access (DMA) controllers, a 133Mhz
PCI-X interface, a x8 PCI-Express interface, and other peripherals to form
a system-on-a-chip RAID subsystem engine.

The iop342 processor replaces the SAS controller with a second Xscale core
for dual core embedded applications.

The iop341 processor is the single core version of iop342.

This patch supports the two Intel customer reference platforms iq81340mc
for external storage and iq81340sc for direct attach (HBA) development.

The developer's manual is available here:
ftp://download.intel.com/design/iio/docs/31503701.pdf

Changelog:
* removed virtual addresses from resource definitions
* cleaned up some unnecessary #include's

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 files changed, 2233 insertions, 0 deletions

diff --git a/arch/arm/mach-iop13xx/Kconfig b/arch/arm/mach-iop13xx/Kconfig
new file mode 100644
index 00000000000..40c2d689f2e
--- /dev/null
+++ b/arch/arm/mach-iop13xx/Kconfig
@@ -0,0 +1,20 @@
+if ARCH_IOP13XX
+
+menu "IOP13XX Implementation Options"
+
+comment "IOP13XX Platform Support"
+
+config MACH_IQ81340SC
+	bool "Enable IQ81340SC Hardware Support"
+	help
+	  Say Y here if you want to support running on the Intel IQ81340SC
+	  evaluation kit.
+
+config MACH_IQ81340MC
+	bool "Enable IQ81340MC Hardware Support"
+	help
+	  Say Y here if you want to support running on the Intel IQ81340MC
+	  evaluation kit.
+
+endmenu
+endif
diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile
new file mode 100644
index 00000000000..c3d6c08f2d4
--- /dev/null
+++ b/arch/arm/mach-iop13xx/Makefile
@@ -0,0 +1,12 @@
+obj-y			:=
+obj-m			:=
+obj-n			:=
+obj-			:=
+
+obj-$(CONFIG_ARCH_IOP13XX) += setup.o
+obj-$(CONFIG_ARCH_IOP13XX) += irq.o
+obj-$(CONFIG_ARCH_IOP13XX) += time.o
+obj-$(CONFIG_ARCH_IOP13XX) += pci.o
+obj-$(CONFIG_ARCH_IOP13XX) += io.o
+obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
+obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o
diff --git a/arch/arm/mach-iop13xx/Makefile.boot b/arch/arm/mach-iop13xx/Makefile.boot
new file mode 100644
index 00000000000..0b0e19fdfe6
--- /dev/null
+++ b/arch/arm/mach-iop13xx/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y   := 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y 	:= 0x00800000
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
new file mode 100644
index 00000000000..fbf9f88e46e
--- /dev/null
+++ b/arch/arm/mach-iop13xx/io.c
@@ -0,0 +1,93 @@
+/*
+ * iop13xx custom ioremap implementation
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size,
+	unsigned long flags)
+{
+	void __iomem * retval;
+
+	switch (cookie) {
+	case IOP13XX_PCIX_LOWER_MEM_RA ... IOP13XX_PCIX_UPPER_MEM_RA:
+		if (unlikely(!iop13xx_atux_mem_base))
+			retval = NULL;
+		else
+			retval = (void *)(iop13xx_atux_mem_base +
+			         (cookie - IOP13XX_PCIX_LOWER_MEM_RA));
+		break;
+	case IOP13XX_PCIE_LOWER_MEM_RA ... IOP13XX_PCIE_UPPER_MEM_RA:
+		if (unlikely(!iop13xx_atue_mem_base))
+			retval = NULL;
+		else
+			retval = (void *)(iop13xx_atue_mem_base +
+			         (cookie - IOP13XX_PCIE_LOWER_MEM_RA));
+		break;
+	case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
+		retval = __ioremap(IOP13XX_PBI_LOWER_MEM_PA +
+				  (cookie - IOP13XX_PBI_LOWER_MEM_RA),
+				  size, flags);
+		break;
+	case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
+		retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
+		break;
+	case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
+		retval = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(cookie);
+		break;
+	case IOP13XX_PMMR_PHYS_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_PA:
+		retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
+		break;
+	default:
+		retval = __ioremap(cookie, size, flags);
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL(__iop13xx_ioremap);
+
+void __iop13xx_iounmap(void __iomem *addr)
+{
+	extern void __iounmap(volatile void __iomem *addr);
+
+	if (iop13xx_atue_mem_base)
+		if (addr >= (void __iomem *) iop13xx_atue_mem_base &&
+	 	    addr < (void __iomem *) (iop13xx_atue_mem_base +
+	 	    			     iop13xx_atue_mem_size))
+		    goto skip;
+
+	if (iop13xx_atux_mem_base)
+		if (addr >= (void __iomem *) iop13xx_atux_mem_base &&
+	 	    addr < (void __iomem *) (iop13xx_atux_mem_base +
+	 	    			     iop13xx_atux_mem_size))
+		    goto skip;
+
+	switch ((u32) addr) {
+	case IOP13XX_PCIE_LOWER_IO_VA ... IOP13XX_PCIE_UPPER_IO_VA:
+	case IOP13XX_PCIX_LOWER_IO_VA ... IOP13XX_PCIX_UPPER_IO_VA:
+	case IOP13XX_PMMR_VIRT_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_VA:
+		goto skip;
+	}
+	__iounmap(addr);
+
+skip:
+	return;
+}
+EXPORT_SYMBOL(__iop13xx_iounmap);
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
new file mode 100644
index 00000000000..ee595786cd2
--- /dev/null
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -0,0 +1,98 @@
+/*
+ * iq81340mc board support
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/pci.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/pci.h>
+#include <asm/mach/time.h>
+
+extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
+
+static int __init
+iq81340mc_pcix_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+{
+	switch (idsel) {
+	case 1:
+		switch (pin) {
+		case 1: return ATUX_INTB;
+		case 2: return ATUX_INTC;
+		case 3: return ATUX_INTD;
+		case 4: return ATUX_INTA;
+		default: return -1;
+		}
+	case 2:
+		switch (pin) {
+		case 1: return ATUX_INTC;
+		case 2: return ATUX_INTD;
+		case 3: return ATUX_INTC;
+		case 4: return ATUX_INTD;
+		default: return -1;
+		}
+	default: return -1;
+	}
+}
+
+static struct hw_pci iq81340mc_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 0,
+	.setup		= iop13xx_pci_setup,
+	.map_irq	= iq81340mc_pcix_map_irq,
+	.scan		= iop13xx_scan_bus,
+	.preinit	= iop13xx_pci_init,
+};
+
+static int __init iq81340mc_pci_init(void)
+{
+	iop13xx_atu_select(&iq81340mc_pci);
+	pci_common_init(&iq81340mc_pci);
+	iop13xx_map_pci_memory();
+
+	return 0;
+}
+
+static void __init iq81340mc_init(void)
+{
+	iop13xx_platform_init();
+	iq81340mc_pci_init();
+}
+
+static void __init iq81340mc_timer_init(void)
+{
+	iop13xx_init_time(400000000);
+}
+
+static struct sys_timer iq81340mc_timer = {
+       .init       = iq81340mc_timer_init,
+       .offset     = iop13xx_gettimeoffset,
+};
+
+MACHINE_START(IQ81340MC, "Intel IQ81340MC")
+	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
+	.phys_io        = PHYS_IO,
+	.io_pg_offst    = IO_PG_OFFSET,
+	.map_io         = iop13xx_map_io,
+	.init_irq       = iop13xx_init_irq,
+	.timer          = &iq81340mc_timer,
+	.boot_params    = BOOT_PARAM_OFFSET,
+	.init_machine   = iq81340mc_init,
+MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
new file mode 100644
index 00000000000..6677e14b61b
--- /dev/null
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -0,0 +1,100 @@
+/*
+ * iq81340sc board support
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/pci.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/pci.h>
+#include <asm/mach/time.h>
+
+extern int init_atu;
+
+static int __init
+iq81340sc_atux_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+{
+	WARN_ON(idsel < 1 || idsel > 2);
+
+	switch (idsel) {
+	case 1:
+		switch (pin) {
+		case 1: return ATUX_INTB;
+		case 2: return ATUX_INTC;
+		case 3: return ATUX_INTD;
+		case 4: return ATUX_INTA;
+		default: return -1;
+		}
+	case 2:
+		switch (pin) {
+		case 1: return ATUX_INTC;
+		case 2: return ATUX_INTC;
+		case 3: return ATUX_INTC;
+		case 4: return ATUX_INTC;
+		default: return -1;
+		}
+	default: return -1;
+	}
+}
+
+static struct hw_pci iq81340sc_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 0,
+	.setup		= iop13xx_pci_setup,
+	.scan		= iop13xx_scan_bus,
+	.map_irq	= iq81340sc_atux_map_irq,
+	.preinit	= iop13xx_pci_init
+};
+
+static int __init iq81340sc_pci_init(void)
+{
+	iop13xx_atu_select(&iq81340sc_pci);
+	pci_common_init(&iq81340sc_pci);
+	iop13xx_map_pci_memory();
+
+	return 0;
+}
+
+static void __init iq81340sc_init(void)
+{
+	iop13xx_platform_init();
+	iq81340sc_pci_init();
+}
+
+static void __init iq81340sc_timer_init(void)
+{
+	iop13xx_init_time(400000000);
+}
+
+static struct sys_timer iq81340sc_timer = {
+       .init       = iq81340sc_timer_init,
+       .offset     = iop13xx_gettimeoffset,
+};
+
+MACHINE_START(IQ81340SC, "Intel IQ81340SC")
+	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
+	.phys_io        = PHYS_IO,
+	.io_pg_offst    = IO_PG_OFFSET,
+	.map_io         = iop13xx_map_io,
+	.init_irq       = iop13xx_init_irq,
+	.timer          = &iq81340sc_timer,
+	.boot_params    = BOOT_PARAM_OFFSET,
+	.init_machine   = iq81340sc_init,
+MACHINE_END
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
new file mode 100644
index 00000000000..c4d9c8c5579
--- /dev/null
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -0,0 +1,286 @@
+/*
+ * iop13xx IRQ handling / support functions
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/sysctl.h>
+#include <asm/uaccess.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/arch/irqs.h>
+
+/* INTCTL0 CP6 R0 Page 4
+ */
+static inline u32 read_intctl_0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c4, 0":"=r" (val));
+	return val;
+}
+static inline void write_intctl_0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c0, c4, 0"::"r" (val));
+}
+
+/* INTCTL1 CP6 R1 Page 4
+ */
+static inline u32 read_intctl_1(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c1, c4, 0":"=r" (val));
+	return val;
+}
+static inline void write_intctl_1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c1, c4, 0"::"r" (val));
+}
+
+/* INTCTL2 CP6 R2 Page 4
+ */
+static inline u32 read_intctl_2(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c2, c4, 0":"=r" (val));
+	return val;
+}
+static inline void write_intctl_2(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c4, 0"::"r" (val));
+}
+
+/* INTCTL3 CP6 R3 Page 4
+ */
+static inline u32 read_intctl_3(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c3, c4, 0":"=r" (val));
+	return val;
+}
+static inline void write_intctl_3(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c3, c4, 0"::"r" (val));
+}
+
+/* INTSTR0 CP6 R0 Page 5
+ */
+static inline u32 read_intstr_0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c5, 0":"=r" (val));
+	return val;
+}
+static inline void write_intstr_0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c0, c5, 0"::"r" (val));
+}
+
+/* INTSTR1 CP6 R1 Page 5
+ */
+static inline u32 read_intstr_1(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c1, c5, 0":"=r" (val));
+	return val;
+}
+static void write_intstr_1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c1, c5, 0"::"r" (val));
+}
+
+/* INTSTR2 CP6 R2 Page 5
+ */
+static inline u32 read_intstr_2(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c2, c5, 0":"=r" (val));
+	return val;
+}
+static void write_intstr_2(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c5, 0"::"r" (val));
+}
+
+/* INTSTR3 CP6 R3 Page 5
+ */
+static inline u32 read_intstr_3(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c3, c5, 0":"=r" (val));
+	return val;
+}
+static void write_intstr_3(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c3, c5, 0"::"r" (val));
+}
+
+/* INTBASE CP6 R0 Page 2
+ */
+static inline u32 read_intbase(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c2, 0":"=r" (val));
+	return val;
+}
+static void write_intbase(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c0, c2, 0"::"r" (val));
+}
+
+/* INTSIZE CP6 R2 Page 2
+ */
+static inline u32 read_intsize(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c2, c2, 0":"=r" (val));
+	return val;
+}
+static void write_intsize(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c2, 0"::"r" (val));
+}
+
+/* 0 = Interrupt Masked and 1 = Interrupt not masked */
+static void
+iop13xx_irq_mask0 (unsigned int irq)
+{
+	u32 cp_flags = iop13xx_cp6_save();
+	write_intctl_0(read_intctl_0() & ~(1 << (irq - 0)));
+	iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_mask1 (unsigned int irq)
+{
+	u32 cp_flags = iop13xx_cp6_save();
+	write_intctl_1(read_intctl_1() & ~(1 << (irq - 32)));
+	iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_mask2 (unsigned int irq)
+{
+	u32 cp_flags = iop13xx_cp6_save();
+	write_intctl_2(read_intctl_2() & ~(1 << (irq - 64)));
+	iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_mask3 (unsigned int irq)
+{
+	u32 cp_flags = iop13xx_cp6_save();
+	write_intctl_3(read_intctl_3() & ~(1 << (irq - 96)));
+	iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_unmask0(unsigned int irq)
+{
+	u32 cp_flags = iop13xx_cp6_save();
+	write_intctl_0(read_intctl_0() | (1 << (irq - 0)));
+	iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_unmask1(unsigned int irq)
+{
+	u32 cp_flags = iop13xx_cp6_save();
+	write_intctl_1(read_intctl_1() | (1 << (irq - 32)));
+	iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_unmask2(unsigned int irq)
+{
+	u32 cp_flags = iop13xx_cp6_save();
+	write_intctl_2(read_intctl_2() | (1 << (irq - 64)));
+	iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_unmask3(unsigned int irq)
+{
+	u32 cp_flags = iop13xx_cp6_save();
+	write_intctl_3(read_intctl_3() | (1 << (irq - 96)));
+	iop13xx_cp6_restore(cp_flags);
+}
+
+static struct irqchip iop13xx_irqchip0 = {
+	.ack    = iop13xx_irq_mask0,
+	.mask   = iop13xx_irq_mask0,
+	.unmask = iop13xx_irq_unmask0,
+};
+
+static struct irqchip iop13xx_irqchip1 = {
+	.ack    = iop13xx_irq_mask1,
+	.mask   = iop13xx_irq_mask1,
+	.unmask = iop13xx_irq_unmask1,
+};
+
+static struct irqchip iop13xx_irqchip2 = {
+	.ack    = iop13xx_irq_mask2,
+	.mask   = iop13xx_irq_mask2,
+	.unmask = iop13xx_irq_unmask2,
+};
+
+static struct irqchip iop13xx_irqchip3 = {
+	.ack    = iop13xx_irq_mask3,
+	.mask   = iop13xx_irq_mask3,
+	.unmask = iop13xx_irq_unmask3,
+};
+
+void __init iop13xx_init_irq(void)
+{
+	unsigned int i;
+
+	u32 cp_flags = iop13xx_cp6_save();
+
+	/* disable all interrupts */
+	write_intctl_0(0);
+	write_intctl_1(0);
+	write_intctl_2(0);
+	write_intctl_3(0);
+
+	/* treat all as IRQ */
+	write_intstr_0(0);
+	write_intstr_1(0);
+	write_intstr_2(0);
+	write_intstr_3(0);
+
+	/* initialize the interrupt vector generator */
+	write_intbase(INTBASE);
+	write_intsize(INTSIZE_4);
+
+	for(i = 0; i < NR_IOP13XX_IRQS; i++) {
+		if (i < 32)
+			set_irq_chip(i, &iop13xx_irqchip0);
+		else if (i < 64)
+			set_irq_chip(i, &iop13xx_irqchip1);
+		else if (i < 96)
+			set_irq_chip(i, &iop13xx_irqchip2);
+		else
+			set_irq_chip(i, &iop13xx_irqchip3);
+
+		set_irq_handler(i, do_level_IRQ);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+
+	iop13xx_cp6_restore(cp_flags);
+}
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
new file mode 100644
index 00000000000..89ec70ea318
--- /dev/null
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -0,0 +1,1113 @@
+/*
+ * iop13xx PCI support
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/sizes.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/pci.h>
+
+#define IOP13XX_PCI_DEBUG 0
+#define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
+
+u32 iop13xx_atux_pmmr_offset; /* This offset can change based on strapping */
+u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */
+static struct pci_bus *pci_bus_atux = 0;
+static struct pci_bus *pci_bus_atue = 0;
+u32 iop13xx_atue_mem_base;
+u32 iop13xx_atux_mem_base;
+size_t iop13xx_atue_mem_size;
+size_t iop13xx_atux_mem_size;
+unsigned long iop13xx_pcibios_min_io = 0;
+unsigned long iop13xx_pcibios_min_mem = 0;
+
+EXPORT_SYMBOL(iop13xx_atue_mem_base);
+EXPORT_SYMBOL(iop13xx_atux_mem_base);
+EXPORT_SYMBOL(iop13xx_atue_mem_size);
+EXPORT_SYMBOL(iop13xx_atux_mem_size);
+
+int init_atu = 0; /* Flag to select which ATU(s) to initialize / disable */
+static unsigned long atux_trhfa_timeout = 0; /* Trhfa = RST# high to first
+						 access */
+
+/* Scan the initialized busses and ioremap the requested memory range
+ */
+void iop13xx_map_pci_memory(void)
+{
+	int atu;
+	struct pci_bus *bus;
+	struct pci_dev *dev;
+	resource_size_t end = 0;
+
+	for (atu = 0; atu < 2; atu++) {
+		bus = atu ? pci_bus_atue : pci_bus_atux;
+		if (bus) {
+			list_for_each_entry(dev, &bus->devices, bus_list) {
+				int i;
+				int max = 7;
+
+				if (dev->subordinate)
+					max = DEVICE_COUNT_RESOURCE;
+
+				for (i = 0; i < max; i++) {
+					struct resource *res = &dev->resource[i];
+					if (res->flags & IORESOURCE_MEM)
+						end = max(res->end, end);
+				}
+			}
+
+			switch(atu) {
+			case 0:
+				iop13xx_atux_mem_size =
+					(end - IOP13XX_PCIX_LOWER_MEM_RA) + 1;
+
+				/* 16MB align the request */
+				if (iop13xx_atux_mem_size & (SZ_16M - 1)) {
+					iop13xx_atux_mem_size &= ~(SZ_16M - 1);
+					iop13xx_atux_mem_size += SZ_16M;
+				}
+
+				if (end) {
+					iop13xx_atux_mem_base =
+					(u32) __ioremap_pfn(
+					__phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
+					, 0, iop13xx_atux_mem_size, 0);
+					if (!iop13xx_atux_mem_base) {
+						printk("%s: atux allocation "
+						       "failed\n", __FUNCTION__);
+						BUG();
+					}
+				} else
+					iop13xx_atux_mem_size = 0;
+				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
+				__FUNCTION__, atu, iop13xx_atux_mem_size,
+				iop13xx_atux_mem_base);
+				break;
+			case 1:
+				iop13xx_atue_mem_size =
+					(end - IOP13XX_PCIE_LOWER_MEM_RA) + 1;
+
+				/* 16MB align the request */
+				if (iop13xx_atue_mem_size & (SZ_16M - 1)) {
+					iop13xx_atue_mem_size &= ~(SZ_16M - 1);
+					iop13xx_atue_mem_size += SZ_16M;
+				}
+
+				if (end) {
+					iop13xx_atue_mem_base =
+					(u32) __ioremap_pfn(
+					__phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
+					, 0, iop13xx_atue_mem_size, 0);
+					if (!iop13xx_atue_mem_base) {
+						printk("%s: atue allocation "
+						       "failed\n", __FUNCTION__);
+						BUG();
+					}
+				} else
+					iop13xx_atue_mem_size = 0;
+				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
+				__FUNCTION__, atu, iop13xx_atue_mem_size,
+				iop13xx_atue_mem_base);
+				break;
+			}
+
+			printk("%s: Initialized (%uM @ resource/virtual: %08lx/%08x)\n",
+			atu ? "ATUE" : "ATUX",
+			(atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) /
+			SZ_1M,
+			atu ? IOP13XX_PCIE_LOWER_MEM_RA :
+			IOP13XX_PCIX_LOWER_MEM_RA,
+			atu ? iop13xx_atue_mem_base :
+			iop13xx_atux_mem_base);
+			end = 0;
+		}
+
+	}
+}
+
+static inline int iop13xx_atu_function(int atu)
+{
+	int func = 0;
+	/* the function number depends on the value of the
+	 * IOP13XX_INTERFACE_SEL_PCIX reset strap
+	 * see C-Spec section 3.17
+	 */
+	switch(atu) {
+	case IOP13XX_INIT_ATU_ATUX:
+		if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
+			func = 5;
+		else
+			func = 0;
+		break;
+	case IOP13XX_INIT_ATU_ATUE:
+		if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
+			func = 0;
+		else
+			func = 5;
+		break;
+	default:
+		BUG();
+	}
+
+	return func;
+}
+
+/* iop13xx_atux_cfg_address - format a configuration address for atux
+ * @bus: Target bus to access
+ * @devfn: Combined device number and function number
+ * @where: Desired register's address offset
+ *
+ * Convert the parameters to a configuration address formatted
+ * according the PCI-X 2.0 specification
+ */
+static u32 iop13xx_atux_cfg_address(struct pci_bus *bus, int devfn, int where)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	u32 addr;
+
+	if (sys->busnr == bus->number)
+		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
+	else
+		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
+
+	addr |=	PCI_FUNC(devfn) << 8 | ((where & 0xff) & ~3);
+	addr |= ((where & 0xf00) >> 8) << 24; /* upper register number */
+
+	return addr;
+}
+
+/* iop13xx_atue_cfg_address - format a configuration address for atue
+ * @bus: Target bus to access
+ * @devfn: Combined device number and function number
+ * @where: Desired register's address offset
+ *
+ * Convert the parameters to an address usable by the ATUE_OCCAR
+ */
+static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	u32 addr;
+
+	PRINTK("iop13xx_atue_cfg_address: bus: %d dev: %d func: %d",
+		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+	addr = ((u32) bus->number)     << IOP13XX_ATUE_OCCAR_BUS_NUM |
+		   ((u32) PCI_SLOT(devfn)) << IOP13XX_ATUE_OCCAR_DEV_NUM |
+		   ((u32) PCI_FUNC(devfn)) << IOP13XX_ATUE_OCCAR_FUNC_NUM |
+		   (where & ~0x3);
+
+	if (sys->busnr != bus->number)
+		addr |= 1; /* type 1 access */
+
+	return addr;
+}
+
+/* This routine checks the status of the last configuration cycle.  If an error
+ * was detected it returns >0, else it returns a 0.  The errors being checked
+ * are parity, master abort, target abort (master and target).  These types of
+ * errors occure during a config cycle where there is no device, like during
+ * the discovery stage.
+ */
+static int iop13xx_atux_pci_status(int clear)
+{
+	unsigned int status;
+	int err = 0;
+
+	/*
+	 * Check the status registers.
+	 */
+	status = __raw_readw(IOP13XX_ATUX_ATUSR);
+	if (status & IOP_PCI_STATUS_ERROR)
+	{
+		PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
+		if(clear)
+			__raw_writew(status & IOP_PCI_STATUS_ERROR,
+				IOP13XX_ATUX_ATUSR);
+		err = 1;
+	}
+	status = __raw_readl(IOP13XX_ATUX_ATUISR);
+	if (status & IOP13XX_ATUX_ATUISR_ERROR)
+	{
+		PRINTK("\t\t\tPCI error interrupt:  ATUISR %#08x", status);
+		if(clear)
+			__raw_writel(status & IOP13XX_ATUX_ATUISR_ERROR,
+				IOP13XX_ATUX_ATUISR);
+		err = 1;
+	}
+	return err;
+}
+
+/* Simply write the address register and read the configuration
+ * data.  Note that the data dependency on %0 encourages an abort
+ * to be detected before we return.
+ */
+static inline u32 iop13xx_atux_read(unsigned long addr)
+{
+	u32 val;
+
+	__asm__ __volatile__(
+		"str	%1, [%2]\n\t"
+		"ldr	%0, [%3]\n\t"
+		"mov	%0, %0\n\t"
+		: "=r" (val)
+		: "r" (addr), "r" (IOP13XX_ATUX_OCCAR), "r" (IOP13XX_ATUX_OCCDR));
+
+	return val;
+}
+
+/* The read routines must check the error status of the last configuration
+ * cycle.  If there was an error, the routine returns all hex f's.
+ */
+static int
+iop13xx_atux_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		int size, u32 *value)
+{
+	unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
+	u32 val = iop13xx_atux_read(addr) >> ((where & 3) * 8);
+
+	if (iop13xx_atux_pci_status(1) || is_atux_occdr_error()) {
+		__raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
+			IOP13XX_XBG_BECSR);
+		val = 0xffffffff;
+	}
+
+	*value = val;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+iop13xx_atux_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		int size, u32 value)
+{
+	unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
+	u32 val;
+
+	if (size != 4) {
+		val = iop13xx_atux_read(addr);
+		if (!iop13xx_atux_pci_status(1) == 0)
+			return PCIBIOS_SUCCESSFUL;
+
+		where = (where & 3) * 8;
+
+		if (size == 1)
+			val &= ~(0xff << where);
+		else
+			val &= ~(0xffff << where);
+
+		__raw_writel(val | value << where, IOP13XX_ATUX_OCCDR);
+	} else {
+		__raw_writel(addr, IOP13XX_ATUX_OCCAR);
+		__raw_writel(value, IOP13XX_ATUX_OCCDR);
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops iop13xx_atux_ops = {
+	.read	= iop13xx_atux_read_config,
+	.write	= iop13xx_atux_write_config,
+};
+
+/* This routine checks the status of the last configuration cycle.  If an error
+ * was detected it returns >0, else it returns a 0.  The errors being checked
+ * are parity, master abort, target abort (master and target).  These types of
+ * errors occure during a config cycle where there is no device, like during
+ * the discovery stage.
+ */
+static int iop13xx_atue_pci_status(int clear)
+{
+	unsigned int status;
+	int err = 0;
+
+	/*
+	 * Check the status registers.
+	 */
+
+	/* standard pci status register */
+	status = __raw_readw(IOP13XX_ATUE_ATUSR);
+	if (status & IOP_PCI_STATUS_ERROR) {
+		PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
+		if(clear)
+			__raw_writew(status & IOP_PCI_STATUS_ERROR,
+				IOP13XX_ATUE_ATUSR);
+		err++;
+	}
+
+	/* check the normal status bits in the ATUISR */
+	status = __raw_readl(IOP13XX_ATUE_ATUISR);
+	if (status & IOP13XX_ATUE_ATUISR_ERROR)	{
+		PRINTK("\t\t\tPCI error: ATUISR %#08x", status);
+		if (clear)
+			__raw_writew(status & IOP13XX_ATUE_ATUISR_ERROR,
+				IOP13XX_ATUE_ATUISR);
+		err++;
+
+		/* check the PCI-E status if the ATUISR reports an interface error */
+		if (status & IOP13XX_ATUE_STAT_PCI_IFACE_ERR) {
+			/* get the unmasked errors */
+			status = __raw_readl(IOP13XX_ATUE_PIE_STS) &
+					~(__raw_readl(IOP13XX_ATUE_PIE_MSK));
+
+			if (status) {
+				PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
+					__raw_readl(IOP13XX_ATUE_PIE_STS));
+				err++;
+			} else {
+				PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
+					__raw_readl(IOP13XX_ATUE_PIE_STS));
+				PRINTK("\t\t\tPCI-E error: ATUE_PIE_MSK %#08x",
+					__raw_readl(IOP13XX_ATUE_PIE_MSK));
+				BUG();
+			}
+
+			if(clear)
+				__raw_writel(status, IOP13XX_ATUE_PIE_STS);
+		}
+	}
+
+	return err;
+}
+
+static inline int __init
+iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+{
+	WARN_ON(idsel != 0);
+
+	switch (pin) {
+	case 1: return ATUE_INTA;
+	case 2: return ATUE_INTB;
+	case 3: return ATUE_INTC;
+	case 4: return ATUE_INTD;
+	default: return -1;
+	}
+}
+
+static inline u32 iop13xx_atue_read(unsigned long addr)
+{
+	u32 val;
+
+	__raw_writel(addr, IOP13XX_ATUE_OCCAR);
+	val = __raw_readl(IOP13XX_ATUE_OCCDR);
+
+	rmb();
+
+	return val;
+}
+
+/* The read routines must check the error status of the last configuration
+ * cycle.  If there was an error, the routine returns all hex f's.
+ */
+static int
+iop13xx_atue_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		int size, u32 *value)
+{
+	u32 val;
+	unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
+
+	/* Hide device numbers > 0 on the local PCI-E bus (Type 0 access) */
+	if (!PCI_SLOT(devfn) || (addr & 1)) {
+		val = iop13xx_atue_read(addr) >> ((where & 3) * 8);
+		if( iop13xx_atue_pci_status(1) || is_atue_occdr_error() ) {
+			__raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
+				IOP13XX_XBG_BECSR);
+			val = 0xffffffff;
+		}
+
+		PRINTK("addr=%#0lx, val=%#010x", addr, val);
+	} else
+		val = 0xffffffff;
+
+	*value = val;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+iop13xx_atue_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		int size, u32 value)
+{
+	unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
+	u32 val;
+
+	if (size != 4) {
+		val = iop13xx_atue_read(addr);
+		if (!iop13xx_atue_pci_status(1) == 0)
+			return PCIBIOS_SUCCESSFUL;
+
+		where = (where & 3) * 8;
+
+		if (size == 1)
+			val &= ~(0xff << where);
+		else
+			val &= ~(0xffff << where);
+
+		__raw_writel(val | value << where, IOP13XX_ATUE_OCCDR);
+	} else {
+		__raw_writel(addr, IOP13XX_ATUE_OCCAR);
+		__raw_writel(value, IOP13XX_ATUE_OCCDR);
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops iop13xx_atue_ops = {
+	.read	= iop13xx_atue_read_config,
+	.write	= iop13xx_atue_write_config,
+};
+
+/* When a PCI device does not exist during config cycles, the XScale gets a
+ * bus error instead of returning 0xffffffff.  We can't rely on the ATU status
+ * bits to tell us that it was indeed a configuration cycle that caused this
+ * error especially in the case when the ATUE link is down.  Instead we rely
+ * on data from the south XSI bridge to validate the abort
+ */
+int
+iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	PRINTK("Data abort: address = 0x%08lx "
+		    "fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx",
+		addr, fsr, regs->ARM_pc, regs->ARM_lr);
+
+	PRINTK("IOP13XX_XBG_BECSR: %#10x", __raw_readl(IOP13XX_XBG_BECSR));
+	PRINTK("IOP13XX_XBG_BERAR: %#10x", __raw_readl(IOP13XX_XBG_BERAR));
+	PRINTK("IOP13XX_XBG_BERUAR: %#10x", __raw_readl(IOP13XX_XBG_BERUAR));
+
+	/*  If it was an imprecise abort, then we need to correct the
+	 *  return address to be _after_ the instruction.
+	 */
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+
+	if (is_atue_occdr_error() || is_atux_occdr_error())
+		return 0;
+	else
+		return 1;
+}
+
+/* Scan an IOP13XX PCI bus.  nr selects which ATU we use.
+ */
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	int which_atu;
+	struct pci_bus *bus = NULL;
+
+	switch (init_atu) {
+	case IOP13XX_INIT_ATU_ATUX:
+		which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
+		break;
+	case IOP13XX_INIT_ATU_ATUE:
+		which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
+		break;
+	case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
+		which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
+		break;
+	default:
+		which_atu = 0;
+	}
+
+	if (!which_atu) {
+		BUG();
+		return NULL;
+	}
+
+	switch (which_atu) {
+	case IOP13XX_INIT_ATU_ATUX:
+		if (time_after_eq(jiffies + msecs_to_jiffies(1000),
+				  atux_trhfa_timeout))  /* ensure not wrap */
+			while(time_before(jiffies, atux_trhfa_timeout))
+				udelay(100);
+
+		bus = pci_bus_atux = pci_scan_bus(sys->busnr,
+						  &iop13xx_atux_ops,
+						  sys);
+		break;
+	case IOP13XX_INIT_ATU_ATUE:
+		bus = pci_bus_atue = pci_scan_bus(sys->busnr,
+						  &iop13xx_atue_ops,
+						  sys);
+		break;
+	}
+
+	return bus;
+}
+
+/* This function is called from iop13xx_pci_init() after assigning valid
+ * values to iop13xx_atue_pmmr_offset.  This is the location for common
+ * setup of ATUE for all IOP13XX implementations.
+ */
+void __init iop13xx_atue_setup(void)
+{
+	int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
+	u32 reg_val;
+
+	/* BAR 1 (1:1 mapping with Physical RAM) */
+	/* Set limit and enable */
+	__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
+			IOP13XX_ATUE_IALR1);
+	__raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
+
+	/* Set base at the top of the reserved address space */
+	__raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
+			PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUE_IABAR1);
+
+	/* 1:1 mapping with physical ram
+	 * (leave big endian byte swap disabled)
+	 */
+	 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
+	 __raw_writel(PHYS_OFFSET, IOP13XX_ATUE_IATVR1);
+
+	/* Outbound window 1 (PCIX/PCIE memory window) */
+	/* 32 bit Address Space */
+	__raw_writel(0x0, IOP13XX_ATUE_OUMWTVR1);
+	/* PA[35:32] */
+	__raw_writel(IOP13XX_ATUE_OUMBAR_ENABLE |
+			(IOP13XX_PCIE_MEM_PHYS_OFFSET >> 32),
+			IOP13XX_ATUE_OUMBAR1);
+
+	/* Setup the I/O Bar
+	 * A[35-16] in 31-12
+	 */
+	__raw_writel(((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000),
+		IOP13XX_ATUE_OIOBAR);
+	__raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
+
+	/* clear startup errors */
+	iop13xx_atue_pci_status(1);
+
+	/* OIOBAR function number
+	 */
+	reg_val = __raw_readl(IOP13XX_ATUE_OIOBAR);
+	reg_val &= ~0x7;
+	reg_val |= func;
+	__raw_writel(reg_val, IOP13XX_ATUE_OIOBAR);
+
+	/* OUMBAR function numbers
+	 */
+	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
+	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+			IOP13XX_ATU_OUMBAR_FUNC_NUM);
+	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
+
+	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
+	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+			IOP13XX_ATU_OUMBAR_FUNC_NUM);
+	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
+
+	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
+	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+			IOP13XX_ATU_OUMBAR_FUNC_NUM);
+	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
+
+	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
+	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+			IOP13XX_ATU_OUMBAR_FUNC_NUM);
+	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
+
+	/* Enable inbound and outbound cycles
+	 */
+	reg_val = __raw_readw(IOP13XX_ATUE_ATUCMD);
+	reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+			PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+	__raw_writew(reg_val, IOP13XX_ATUE_ATUCMD);
+
+	reg_val = __raw_readl(IOP13XX_ATUE_ATUCR);
+	reg_val |= IOP13XX_ATUE_ATUCR_OUT_EN |
+			IOP13XX_ATUE_ATUCR_IVM;
+	__raw_writel(reg_val, IOP13XX_ATUE_ATUCR);
+}
+
+void __init iop13xx_atue_disable(void)
+{
+	u32 reg_val;
+
+	__raw_writew(0x0, IOP13XX_ATUE_ATUCMD);
+	__raw_writel(IOP13XX_ATUE_ATUCR_IVM, IOP13XX_ATUE_ATUCR);
+
+	/* wait for cycles to quiesce */
+	while (__raw_readl(IOP13XX_ATUE_PCSR) & (IOP13XX_ATUE_PCSR_OUT_Q_BUSY |
+					     IOP13XX_ATUE_PCSR_IN_Q_BUSY |
+					     IOP13XX_ATUE_PCSR_LLRB_BUSY))
+		cpu_relax();
+
+	/* BAR 0 ( Disabled ) */
+	__raw_writel(0x0, IOP13XX_ATUE_IAUBAR0);
+	__raw_writel(0x0, IOP13XX_ATUE_IABAR0);
+	__raw_writel(0x0, IOP13XX_ATUE_IAUTVR0);
+	__raw_writel(0x0, IOP13XX_ATUE_IATVR0);
+	__raw_writel(0x0, IOP13XX_ATUE_IALR0);
+	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
+	reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
+	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
+
+	/* BAR 1 ( Disabled ) */
+	__raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
+	__raw_writel(0x0, IOP13XX_ATUE_IABAR1);
+	__raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
+	__raw_writel(0x0, IOP13XX_ATUE_IATVR1);
+	__raw_writel(0x0, IOP13XX_ATUE_IALR1);
+	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
+	reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
+	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
+
+	/* BAR 2 ( Disabled ) */
+	__raw_writel(0x0, IOP13XX_ATUE_IAUBAR2);
+	__raw_writel(0x0, IOP13XX_ATUE_IABAR2);
+	__raw_writel(0x0, IOP13XX_ATUE_IAUTVR2);
+	__raw_writel(0x0, IOP13XX_ATUE_IATVR2);
+	__raw_writel(0x0, IOP13XX_ATUE_IALR2);
+	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
+	reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
+	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
+
+	/* BAR 3 ( Disabled ) */
+	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
+	reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
+	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
+
+	/* Setup the I/O Bar
+	 * A[35-16] in 31-12
+	 */
+	__raw_writel((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000,
+			IOP13XX_ATUE_OIOBAR);
+	__raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
+}
+
+/* This function is called from iop13xx_pci_init() after assigning valid
+ * values to iop13xx_atux_pmmr_offset.  This is the location for common
+ * setup of ATUX for all IOP13XX implementations.
+ */
+void __init iop13xx_atux_setup(void)
+{
+	u32 reg_val;
+	int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX);
+
+	/* Take PCI-X bus out of reset if bootloader hasn't already.
+	 * According to spec, we should wait for 2^25 PCI clocks to meet
+	 * the PCI timing parameter Trhfa (RST# high to first access).
+	 * This is rarely necessary and often ignored.
+	 */
+	reg_val = __raw_readl(IOP13XX_ATUX_PCSR);
+	if (reg_val & IOP13XX_ATUX_PCSR_P_RSTOUT) {
+		int msec = (reg_val >> IOP13XX_ATUX_PCSR_FREQ_OFFSET) & 0x7;
+		msec = 1000 / (8-msec); /* bits 100=133MHz, 111=>33MHz */
+		__raw_writel(reg_val & ~IOP13XX_ATUX_PCSR_P_RSTOUT,
+				IOP13XX_ATUX_PCSR);
+		atux_trhfa_timeout = jiffies + msecs_to_jiffies(msec);
+	}
+	else
+		atux_trhfa_timeout = jiffies;
+
+	/* BAR 1 (1:1 mapping with Physical RAM) */
+	/* Set limit and enable */
+	__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
+			IOP13XX_ATUX_IALR1);
+	__raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
+
+	/* Set base at the top of the reserved address space */
+	__raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
+			PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUX_IABAR1);
+
+	/* 1:1 mapping with physical ram
+	 * (leave big endian byte swap disabled)
+	 */
+	__raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
+	__raw_writel(PHYS_OFFSET, IOP13XX_ATUX_IATVR1);
+
+	/* Outbound window 1 (PCIX/PCIE memory window) */
+	/* 32 bit Address Space */
+	__raw_writel(0x0, IOP13XX_ATUX_OUMWTVR1);
+	/* PA[35:32] */
+	__raw_writel(IOP13XX_ATUX_OUMBAR_ENABLE |
+			IOP13XX_PCIX_MEM_PHYS_OFFSET >> 32,
+			IOP13XX_ATUX_OUMBAR1);
+
+	/* Setup the I/O Bar
+	 * A[35-16] in 31-12
+	 */
+	__raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
+		IOP13XX_ATUX_OIOBAR);
+	__raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
+
+	/* clear startup errors */
+	iop13xx_atux_pci_status(1);
+
+	/* OIOBAR function number
+	 */
+	reg_val = __raw_readl(IOP13XX_ATUX_OIOBAR);
+	reg_val &= ~0x7;
+	reg_val |= func;
+	__raw_writel(reg_val, IOP13XX_ATUX_OIOBAR);
+
+	/* OUMBAR function numbers
+	 */
+	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
+	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+			IOP13XX_ATU_OUMBAR_FUNC_NUM);
+	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
+
+	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
+	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+			IOP13XX_ATU_OUMBAR_FUNC_NUM);
+	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
+
+	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
+	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+			IOP13XX_ATU_OUMBAR_FUNC_NUM);
+	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
+
+	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
+	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+			IOP13XX_ATU_OUMBAR_FUNC_NUM);
+	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
+
+	/* Enable inbound and outbound cycles
+	 */
+	reg_val = __raw_readw(IOP13XX_ATUX_ATUCMD);
+	reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+		        PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+	__raw_writew(reg_val, IOP13XX_ATUX_ATUCMD);
+
+	reg_val = __raw_readl(IOP13XX_ATUX_ATUCR);
+	reg_val |= IOP13XX_ATUX_ATUCR_OUT_EN;
+	__raw_writel(reg_val, IOP13XX_ATUX_ATUCR);
+}
+
+void __init iop13xx_atux_disable(void)
+{
+	u32 reg_val;
+
+	__raw_writew(0x0, IOP13XX_ATUX_ATUCMD);
+	__raw_writel(0x0, IOP13XX_ATUX_ATUCR);
+
+	/* wait for cycles to quiesce */
+	while (__raw_readl(IOP13XX_ATUX_PCSR) & (IOP13XX_ATUX_PCSR_OUT_Q_BUSY |
+				     IOP13XX_ATUX_PCSR_IN_Q_BUSY))
+		cpu_relax();
+
+	/* BAR 0 ( Disabled ) */
+	__raw_writel(0x0, IOP13XX_ATUX_IAUBAR0);
+	__raw_writel(0x0, IOP13XX_ATUX_IABAR0);
+	__raw_writel(0x0, IOP13XX_ATUX_IAUTVR0);
+	__raw_writel(0x0, IOP13XX_ATUX_IATVR0);
+	__raw_writel(0x0, IOP13XX_ATUX_IALR0);
+	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
+	reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
+	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
+
+	/* BAR 1 ( Disabled ) */
+	__raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
+	__raw_writel(0x0, IOP13XX_ATUX_IABAR1);
+	__raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
+	__raw_writel(0x0, IOP13XX_ATUX_IATVR1);
+	__raw_writel(0x0, IOP13XX_ATUX_IALR1);
+	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
+	reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
+	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
+
+	/* BAR 2 ( Disabled ) */
+	__raw_writel(0x0, IOP13XX_ATUX_IAUBAR2);
+	__raw_writel(0x0, IOP13XX_ATUX_IABAR2);
+	__raw_writel(0x0, IOP13XX_ATUX_IAUTVR2);
+	__raw_writel(0x0, IOP13XX_ATUX_IATVR2);
+	__raw_writel(0x0, IOP13XX_ATUX_IALR2);
+	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
+	reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
+	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
+
+	/* BAR 3 ( Disabled ) */
+	__raw_writel(0x0, IOP13XX_ATUX_IAUBAR3);
+	__raw_writel(0x0, IOP13XX_ATUX_IABAR3);
+	__raw_writel(0x0, IOP13XX_ATUX_IAUTVR3);
+	__raw_writel(0x0, IOP13XX_ATUX_IATVR3);
+	__raw_writel(0x0, IOP13XX_ATUX_IALR3);
+	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
+	reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
+	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
+
+	/* Setup the I/O Bar
+	* A[35-16] in 31-12
+	*/
+	__raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
+			IOP13XX_ATUX_OIOBAR);
+	__raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
+}
+
+void __init iop13xx_set_atu_mmr_bases(void)
+{
+	/* Based on ESSR0, determine the ATU X/E offsets */
+	switch(__raw_readl(IOP13XX_ESSR0) &
+		(IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX)) {
+	/* both asserted */
+	case 0:
+		iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
+		iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
+		break;
+	/* IOP13XX_CONTROLLER_ONLY = deasserted
+	 * IOP13XX_INTERFACE_SEL_PCIX = asserted
+	 */
+	case IOP13XX_CONTROLLER_ONLY:
+		iop13xx_atux_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
+		iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
+		break;
+	/* IOP13XX_CONTROLLER_ONLY = asserted
+	 * IOP13XX_INTERFACE_SEL_PCIX = deasserted
+	 */
+	case IOP13XX_INTERFACE_SEL_PCIX:
+		iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
+		iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
+		break;
+	/* both deasserted */
+	case IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX:
+		iop13xx_atux_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
+		iop13xx_atue_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
+		break;
+	default:
+		BUG();
+	}
+}
+
+void __init iop13xx_atu_select(struct hw_pci *plat_pci)
+{
+	int i;
+
+	/* set system defaults
+	 * note: if "iop13xx_init_atu=" is specified this autodetect
+	 * sequence will be bypassed
+	 */
+	if (init_atu == IOP13XX_INIT_ATU_DEFAULT) {
+		/* check for single/dual interface */
+		if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX) {
+			/* ATUE must be present check the device id
+			 * to see if ATUX is present.
+			 */
+			init_atu |= IOP13XX_INIT_ATU_ATUE;
+			switch (__raw_readw(IOP13XX_ATUE_DID) & 0xf0) {
+			case 0x70:
+			case 0x80:
+			case 0xc0:
+				init_atu |= IOP13XX_INIT_ATU_ATUX;
+				break;
+			}
+		} else {
+			/* ATUX must be present check the device id
+			 * to see if ATUE is present.
+			 */
+			init_atu |= IOP13XX_INIT_ATU_ATUX;
+			switch (__raw_readw(IOP13XX_ATUX_DID) & 0xf0) {
+			case 0x70:
+			case 0x80:
+			case 0xc0:
+				init_atu |= IOP13XX_INIT_ATU_ATUE;
+				break;
+			}
+		}
+
+		/* check central resource and root complex capability */
+		if (init_atu & IOP13XX_INIT_ATU_ATUX)
+			if (!(__raw_readl(IOP13XX_ATUX_PCSR) &
+				IOP13XX_ATUX_PCSR_CENTRAL_RES))
+				init_atu &= ~IOP13XX_INIT_ATU_ATUX;
+
+		if (init_atu & IOP13XX_INIT_ATU_ATUE)
+			if (__raw_readl(IOP13XX_ATUE_PCSR) &
+				IOP13XX_ATUE_PCSR_END_POINT)
+				init_atu &= ~IOP13XX_INIT_ATU_ATUE;
+	}
+
+	for (i = 0; i < 2; i++) {
+		if((init_atu & (1 << i)) == (1 << i))
+			plat_pci->nr_controllers++;
+	}
+}
+
+void __init iop13xx_pci_init(void)
+{
+	/* clear pre-existing south bridge errors */
+	__raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
+
+	/* Setup the Min Address for PCI memory... */
+	iop13xx_pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
+
+	/* if Linux is given control of an ATU
+	 * clear out its prior configuration,
+	 * otherwise do not touch the registers
+	 */
+	if (init_atu & IOP13XX_INIT_ATU_ATUE) {
+		iop13xx_atue_disable();
+		iop13xx_atue_setup();
+	}
+
+	if (init_atu & IOP13XX_INIT_ATU_ATUX) {
+		iop13xx_atux_disable();
+		iop13xx_atux_setup();
+	}
+
+	hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS,
+			"imprecise external abort");
+}
+
+/* intialize the pci memory space.  handle any combination of
+ * atue and atux enabled/disabled
+ */
+int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+	struct resource *res;
+	int which_atu;
+	u32 pcixsr, pcsr;
+
+	if (nr > 1)
+		return 0;
+
+	res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+	if (!res)
+		panic("PCI: unable to alloc resources");
+
+	memset(res, 0, sizeof(struct resource) * 2);
+
+	/* 'nr' assumptions:
+	 * ATUX is always 0
+	 * ATUE is 1 when ATUX is also enabled
+	 * ATUE is 0 when ATUX is disabled
+	 */
+	switch(init_atu) {
+	case IOP13XX_INIT_ATU_ATUX:
+		which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
+		break;
+	case IOP13XX_INIT_ATU_ATUE:
+		which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
+		break;
+	case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
+		which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
+		break;
+	default:
+		which_atu = 0;
+	}
+
+	if (!which_atu)
+		return 0;
+
+	switch(which_atu) {
+	case IOP13XX_INIT_ATU_ATUX:
+		pcixsr = __raw_readl(IOP13XX_ATUX_PCIXSR);
+		pcixsr &= ~0xffff;
+		pcixsr |= sys->busnr << IOP13XX_ATUX_PCIXSR_BUS_NUM |
+			  0 << IOP13XX_ATUX_PCIXSR_DEV_NUM |
+			  iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX)
+				  << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
+		__raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
+
+		res[0].start = IOP13XX_PCIX_LOWER_IO_PA;
+		res[0].end   = IOP13XX_PCIX_UPPER_IO_PA;
+		res[0].name  = "IQ81340 ATUX PCI I/O Space";
+		res[0].flags = IORESOURCE_IO;
+
+		res[1].start = IOP13XX_PCIX_LOWER_MEM_RA;
+		res[1].end   = IOP13XX_PCIX_UPPER_MEM_RA;
+		res[1].name  = "IQ81340 ATUX PCI Memory Space";
+		res[1].flags = IORESOURCE_MEM;
+		sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
+		sys->io_offset = IOP13XX_PCIX_IO_OFFSET;
+		break;
+	case IOP13XX_INIT_ATU_ATUE:
+		/* Note: the function number field in the PCSR is ro */
+		pcsr = __raw_readl(IOP13XX_ATUE_PCSR);
+		pcsr &= ~(0xfff8 << 16);
+		pcsr |= sys->busnr << IOP13XX_ATUE_PCSR_BUS_NUM |
+				0 << IOP13XX_ATUE_PCSR_DEV_NUM;
+
+		__raw_writel(pcsr, IOP13XX_ATUE_PCSR);
+
+		res[0].start = IOP13XX_PCIE_LOWER_IO_PA;
+		res[0].end   = IOP13XX_PCIE_UPPER_IO_PA;
+		res[0].name  = "IQ81340 ATUE PCI I/O Space";
+		res[0].flags = IORESOURCE_IO;
+
+		res[1].start = IOP13XX_PCIE_LOWER_MEM_RA;
+		res[1].end   = IOP13XX_PCIE_UPPER_MEM_RA;
+		res[1].name  = "IQ81340 ATUE PCI Memory Space";
+		res[1].flags = IORESOURCE_MEM;
+		sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
+		sys->io_offset = IOP13XX_PCIE_IO_OFFSET;
+		sys->map_irq = iop13xx_pcie_map_irq;
+		break;
+	default:
+		return 0;
+	}
+
+	request_resource(&ioport_resource, &res[0]);
+	request_resource(&iomem_resource, &res[1]);
+
+	sys->resource[0] = &res[0];
+	sys->resource[1] = &res[1];
+	sys->resource[2] = NULL;
+
+	return 1;
+}
+
+u16 iop13xx_dev_id(void)
+{
+	if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
+		return __raw_readw(IOP13XX_ATUE_DID);
+	else
+		return __raw_readw(IOP13XX_ATUX_DID);
+}
+
+static int __init iop13xx_init_atu_setup(char *str)
+{
+        init_atu = IOP13XX_INIT_ATU_NONE;
+        if (str) {
+                while (*str != '\0') {
+                        switch (*str) {
+                        case 'x':
+                        case 'X':
+                                init_atu |= IOP13XX_INIT_ATU_ATUX;
+                                init_atu &= ~IOP13XX_INIT_ATU_NONE;
+                                break;
+                        case 'e':
+                        case 'E':
+                                init_atu |= IOP13XX_INIT_ATU_ATUE;
+                                init_atu &= ~IOP13XX_INIT_ATU_NONE;
+                                break;
+                        case ',':
+                        case '=':
+                                break;
+                        default:
+                                PRINTK("\"iop13xx_init_atu\" malformed at "
+                                            "character: \'%c\'", *str);
+                                *(str + 1) = '\0';
+                                init_atu = IOP13XX_INIT_ATU_DEFAULT;
+                        }
+                        str++;
+                }
+        }
+        return 1;
+}
+
+__setup("iop13xx_init_atu", iop13xx_init_atu_setup);
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
new file mode 100644
index 00000000000..3756d2ccb1a
--- /dev/null
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -0,0 +1,406 @@
+/*
+ * iop13xx platform Initialization
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <linux/serial_8250.h>
+#ifdef CONFIG_MTD_PHYSMAP
+#include <linux/mtd/physmap.h>
+#endif
+#include <asm/mach/map.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#define IOP13XX_UART_XTAL 33334000
+#define IOP13XX_SETUP_DEBUG 0
+#define PRINTK(x...) ((void)(IOP13XX_SETUP_DEBUG && printk(x)))
+
+/* Standard IO mapping for all IOP13XX based systems
+ */
+static struct map_desc iop13xx_std_desc[] __initdata = {
+	{    /* mem mapped registers */
+		.virtual = IOP13XX_PMMR_VIRT_MEM_BASE,
+		.pfn 	 = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE),
+		.length  = IOP13XX_PMMR_SIZE,
+		.type	 = MT_DEVICE,
+	}, { /* PCIE IO space */
+		.virtual = IOP13XX_PCIE_LOWER_IO_VA,
+		.pfn 	 = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA),
+		.length  = IOP13XX_PCIX_IO_WINDOW_SIZE,
+		.type	 = MT_DEVICE,
+	}, { /* PCIX IO space */
+		.virtual = IOP13XX_PCIX_LOWER_IO_VA,
+		.pfn 	 = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA),
+		.length  = IOP13XX_PCIX_IO_WINDOW_SIZE,
+		.type	 = MT_DEVICE,
+	},
+};
+
+static struct resource iop13xx_uart0_resources[] = {
+	[0] = {
+		.start = IOP13XX_UART0_PHYS,
+		.end = IOP13XX_UART0_PHYS + 0x3f,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IOP13XX_UART0,
+		.end = IRQ_IOP13XX_UART0,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource iop13xx_uart1_resources[] = {
+	[0] = {
+		.start = IOP13XX_UART1_PHYS,
+		.end = IOP13XX_UART1_PHYS + 0x3f,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IOP13XX_UART1,
+		.end = IRQ_IOP13XX_UART1,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct plat_serial8250_port iop13xx_uart0_data[] = {
+	{
+       .membase     = (char*)(IOP13XX_UART0_VIRT),
+       .mapbase     = (IOP13XX_UART0_PHYS),
+       .irq         = IRQ_IOP13XX_UART0,
+       .uartclk     = IOP13XX_UART_XTAL,
+       .regshift    = 2,
+       .iotype      = UPIO_MEM,
+       .flags       = UPF_SKIP_TEST,
+	},
+	{  },
+};
+
+static struct plat_serial8250_port iop13xx_uart1_data[] = {
+	{
+       .membase     = (char*)(IOP13XX_UART1_VIRT),
+       .mapbase     = (IOP13XX_UART1_PHYS),
+       .irq         = IRQ_IOP13XX_UART1,
+       .uartclk     = IOP13XX_UART_XTAL,
+       .regshift    = 2,
+       .iotype      = UPIO_MEM,
+       .flags       = UPF_SKIP_TEST,
+	},
+	{  },
+};
+
+/* The ids are fixed up later in iop13xx_platform_init */
+static struct platform_device iop13xx_uart0 = {
+       .name = "serial8250",
+       .id = 0,
+       .dev.platform_data = iop13xx_uart0_data,
+       .num_resources = 2,
+       .resource = iop13xx_uart0_resources,
+};
+
+static struct platform_device iop13xx_uart1 = {
+       .name = "serial8250",
+       .id = 0,
+       .dev.platform_data = iop13xx_uart1_data,
+       .num_resources = 2,
+       .resource = iop13xx_uart1_resources
+};
+
+static struct resource iop13xx_i2c_0_resources[] = {
+	[0] = {
+		.start = IOP13XX_I2C0_PHYS,
+		.end = IOP13XX_I2C0_PHYS + 0x18,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IOP13XX_I2C_0,
+		.end = IRQ_IOP13XX_I2C_0,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource iop13xx_i2c_1_resources[] = {
+	[0] = {
+		.start = IOP13XX_I2C1_PHYS,
+		.end = IOP13XX_I2C1_PHYS + 0x18,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IOP13XX_I2C_1,
+		.end = IRQ_IOP13XX_I2C_1,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource iop13xx_i2c_2_resources[] = {
+	[0] = {
+		.start = IOP13XX_I2C2_PHYS,
+		.end = IOP13XX_I2C2_PHYS + 0x18,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IOP13XX_I2C_2,
+		.end = IRQ_IOP13XX_I2C_2,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+/* I2C controllers. The IOP13XX uses the same block as the IOP3xx, so
+ * we just use the same device name.
+ */
+
+/* The ids are fixed up later in iop13xx_platform_init */
+static struct platform_device iop13xx_i2c_0_controller = {
+	.name = "IOP3xx-I2C",
+	.id = 0,
+	.num_resources = 2,
+	.resource = iop13xx_i2c_0_resources
+};
+
+static struct platform_device iop13xx_i2c_1_controller = {
+	.name = "IOP3xx-I2C",
+	.id = 0,
+	.num_resources = 2,
+	.resource = iop13xx_i2c_1_resources
+};
+
+static struct platform_device iop13xx_i2c_2_controller = {
+	.name = "IOP3xx-I2C",
+	.id = 0,
+	.num_resources = 2,
+	.resource = iop13xx_i2c_2_resources
+};
+
+#ifdef CONFIG_MTD_PHYSMAP
+/* PBI Flash Device
+ */
+static struct physmap_flash_data iq8134x_flash_data = {
+	.width = 2,
+};
+
+static struct resource iq8134x_flash_resource = {
+	.start = IQ81340_FLASHBASE,
+	.end   = 0,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq8134x_flash = {
+	.name           = "physmap-flash",
+	.id             = 0,
+	.dev            = { .platform_data  = &iq8134x_flash_data, },
+	.num_resources  = 1,
+	.resource       = &iq8134x_flash_resource,
+};
+
+static unsigned long iq8134x_probe_flash_size(void)
+{
+	uint8_t __iomem *flash_addr = ioremap(IQ81340_FLASHBASE, PAGE_SIZE);
+	int i;
+	char query[3];
+	unsigned long size = 0;
+	int width = iq8134x_flash_data.width;
+
+	if (flash_addr) {
+		/* send CFI 'query' command */
+		writew(0x98, flash_addr);
+
+		/* check for CFI compliance */
+		for (i = 0; i < 3 * width; i += width)
+			query[i / width] = readb(flash_addr + (0x10 * width) + i);
+
+		/* read the size */
+		if (memcmp(query, "QRY", 3) == 0)
+			size = 1 << readb(flash_addr + (0x27 * width));
+
+		/* send CFI 'read array' command */
+		writew(0xff, flash_addr);
+
+		iounmap(flash_addr);
+	}
+
+	return size;
+}
+#endif
+
+void __init iop13xx_map_io(void)
+{
+	/* Initialize the Static Page Table maps */
+	iotable_init(iop13xx_std_desc, ARRAY_SIZE(iop13xx_std_desc));
+}
+
+static int init_uart = 0;
+static int init_i2c = 0;
+
+void __init iop13xx_platform_init(void)
+{
+	int i;
+	u32 uart_idx, i2c_idx, plat_idx;
+	struct platform_device *iop13xx_devices[IQ81340_MAX_PLAT_DEVICES];
+
+	/* set the bases so we can read the device id */
+	iop13xx_set_atu_mmr_bases();
+
+	memset(iop13xx_devices, 0, sizeof(iop13xx_devices));
+
+	if (init_uart == IOP13XX_INIT_UART_DEFAULT) {
+		switch (iop13xx_dev_id()) {
+		/* enable both uarts on iop341 and iop342 */
+		case 0x3380:
+		case 0x3384:
+		case 0x3388:
+		case 0x338c:
+		case 0x3382:
+		case 0x3386:
+		case 0x338a:
+		case 0x338e:
+			init_uart |= IOP13XX_INIT_UART_0;
+			init_uart |= IOP13XX_INIT_UART_1;
+			break;
+		/* only enable uart 1 */
+		default:
+			init_uart |= IOP13XX_INIT_UART_1;
+		}
+	}
+
+	if (init_i2c == IOP13XX_INIT_I2C_DEFAULT) {
+		switch (iop13xx_dev_id()) {
+		/* enable all i2c units on iop341 and iop342 */
+		case 0x3380:
+		case 0x3384:
+		case 0x3388:
+		case 0x338c:
+		case 0x3382:
+		case 0x3386:
+		case 0x338a:
+		case 0x338e:
+			init_i2c |= IOP13XX_INIT_I2C_0;
+			init_i2c |= IOP13XX_INIT_I2C_1;
+			init_i2c |= IOP13XX_INIT_I2C_2;
+			break;
+		/* only enable i2c 1 and 2 */
+		default:
+			init_i2c |= IOP13XX_INIT_I2C_1;
+			init_i2c |= IOP13XX_INIT_I2C_2;
+		}
+	}
+
+	plat_idx = 0;
+	uart_idx = 0;
+	i2c_idx = 0;
+
+	/* uart 1 (if enabled) is ttyS0 */
+	if (init_uart & IOP13XX_INIT_UART_1) {
+		PRINTK("Adding uart1 to platform device list\n");
+		iop13xx_uart1.id = uart_idx++;
+		iop13xx_devices[plat_idx++] = &iop13xx_uart1;
+	}
+	if (init_uart & IOP13XX_INIT_UART_0) {
+		PRINTK("Adding uart0 to platform device list\n");
+		iop13xx_uart0.id = uart_idx++;
+		iop13xx_devices[plat_idx++] = &iop13xx_uart0;
+	}
+
+	for(i = 0; i < IQ81340_NUM_I2C; i++) {
+		if ((init_i2c & (1 << i)) && IOP13XX_SETUP_DEBUG)
+			printk("Adding i2c%d to platform device list\n", i);
+		switch(init_i2c & (1 << i)) {
+		case IOP13XX_INIT_I2C_0:
+			iop13xx_i2c_0_controller.id = i2c_idx++;
+			iop13xx_devices[plat_idx++] =
+				&iop13xx_i2c_0_controller;
+			break;
+		case IOP13XX_INIT_I2C_1:
+			iop13xx_i2c_1_controller.id = i2c_idx++;
+			iop13xx_devices[plat_idx++] =
+				&iop13xx_i2c_1_controller;
+			break;
+		case IOP13XX_INIT_I2C_2:
+			iop13xx_i2c_2_controller.id = i2c_idx++;
+			iop13xx_devices[plat_idx++] =
+				&iop13xx_i2c_2_controller;
+			break;
+		}
+	}
+
+#ifdef CONFIG_MTD_PHYSMAP
+	iq8134x_flash_resource.end = iq8134x_flash_resource.start +
+				iq8134x_probe_flash_size();
+	if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
+		iop13xx_devices[plat_idx++] = &iq8134x_flash;
+	else
+		printk(KERN_ERR "%s: Failed to probe flash size\n", __FUNCTION__);
+#endif
+
+	platform_add_devices(iop13xx_devices, plat_idx);
+}
+
+static int __init iop13xx_init_uart_setup(char *str)
+{
+	if (str) {
+		while (*str != '\0') {
+			switch(*str) {
+			case '0':
+				init_uart |= IOP13XX_INIT_UART_0;
+				break;
+			case '1':
+				init_uart |= IOP13XX_INIT_UART_1;
+				break;
+			case ',':
+			case '=':
+				break;
+			default:
+				PRINTK("\"iop13xx_init_uart\" malformed"
+					    " at character: \'%c\'", *str);
+				*(str + 1) = '\0';
+				init_uart = IOP13XX_INIT_UART_DEFAULT;
+			}
+			str++;
+		}
+	}
+	return 1;
+}
+
+static int __init iop13xx_init_i2c_setup(char *str)
+{
+	if (str) {
+		while (*str != '\0') {
+			switch(*str) {
+			case '0':
+				init_i2c |= IOP13XX_INIT_I2C_0;
+				break;
+			case '1':
+				init_i2c |= IOP13XX_INIT_I2C_1;
+				break;
+			case '2':
+				init_i2c |= IOP13XX_INIT_I2C_2;
+				break;
+			case ',':
+			case '=':
+				break;
+			default:
+				PRINTK("\"iop13xx_init_i2c\" malformed"
+					    " at character: \'%c\'", *str);
+				*(str + 1) = '\0';
+				init_i2c = IOP13XX_INIT_I2C_DEFAULT;
+			}
+			str++;
+		}
+	}
+	return 1;
+}
+
+__setup("iop13xx_init_uart", iop13xx_init_uart_setup);
+__setup("iop13xx_init_i2c", iop13xx_init_i2c_setup);
diff --git a/arch/arm/mach-iop13xx/time.c b/arch/arm/mach-iop13xx/time.c
new file mode 100644
index 00000000000..8b21365f653
--- /dev/null
+++ b/arch/arm/mach-iop13xx/time.c
@@ -0,0 +1,102 @@
+/*
+ * arch/arm/mach-iop13xx/time.c
+ *
+ * Timer code for IOP13xx (copied from IOP32x/IOP33x implementation)
+ *
+ * Author: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright 2002-2003 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+static unsigned long ticks_per_jiffy;
+static unsigned long ticks_per_usec;
+static unsigned long next_jiffy_time;
+
+static inline u32 read_tcr1(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c3, c9, 0" : "=r" (val));
+	return val;
+}
+
+unsigned long iop13xx_gettimeoffset(void)
+{
+	unsigned long offset;
+	u32 cp_flags;
+
+	cp_flags = iop13xx_cp6_save();
+	offset = next_jiffy_time - read_tcr1();
+	iop13xx_cp6_restore(cp_flags);
+
+	return offset / ticks_per_usec;
+}
+
+static irqreturn_t
+iop13xx_timer_interrupt(int irq, void *dev_id)
+{
+	u32 cp_flags = iop13xx_cp6_save();
+
+	write_seqlock(&xtime_lock);
+
+	asm volatile("mcr p6, 0, %0, c6, c9, 0" : : "r" (1));
+
+	while ((signed long)(next_jiffy_time - read_tcr1())
+							>= ticks_per_jiffy) {
+		timer_tick();
+		next_jiffy_time -= ticks_per_jiffy;
+	}
+
+	write_sequnlock(&xtime_lock);
+
+	iop13xx_cp6_restore(cp_flags);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction iop13xx_timer_irq = {
+	.name		= "IOP13XX Timer Tick",
+	.handler	= iop13xx_timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+};
+
+void __init iop13xx_init_time(unsigned long tick_rate)
+{
+	u32 timer_ctl;
+	u32 cp_flags;
+
+	ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
+	ticks_per_usec = tick_rate / 1000000;
+	next_jiffy_time = 0xffffffff;
+
+	timer_ctl = IOP13XX_TMR_EN | IOP13XX_TMR_PRIVILEGED |
+			IOP13XX_TMR_RELOAD | IOP13XX_TMR_RATIO_1_1;
+
+	/*
+	 * We use timer 0 for our timer interrupt, and timer 1 as
+	 * monotonic counter for tracking missed jiffies.
+	 */
+	cp_flags = iop13xx_cp6_save();
+	asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (ticks_per_jiffy - 1));
+	asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (timer_ctl));
+	asm volatile("mcr p6, 0, %0, c5, c9, 0" : : "r" (0xffffffff));
+	asm volatile("mcr p6, 0, %0, c1, c9, 0" : : "r" (timer_ctl));
+	iop13xx_cp6_restore(cp_flags);
+
+	setup_irq(IRQ_IOP13XX_TIMER0, &iop13xx_timer_irq);
+}