Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits)
  [ARM] 4578/1: CM-x270: PCMCIA support
  [ARM] 4577/1: ITE 8152 PCI bridge support
  [ARM] 4576/1: CM-X270 machine support
  [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()
  [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c
  [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c
  [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols
  [ARM] pxa: PXA3xx base support
  [NET] smc91x: fix PXA DMA support code
  [SERIAL] Fix console initialisation ordering
  [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile
  [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes
  [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils
  [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23)
  [ARM] Rename consistent_sync() as dma_cache_maint()
  [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support
  [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support
  [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32
  [ARM] 4594/1: ns9xxx: use the new gpio functions
  [ARM] 4593/1: ns9xxx: implement generic clockevents
  ...

17 files changed, 2099 insertions, 49 deletions

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index f6ecdd3a247..79f0b1f8497 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -84,11 +84,39 @@ config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
-          Support for the Palm Tungsten E PDA. Currently only the LCD panel
-          is supported. To boot the kernel, you'll need a PalmOS compatible
-          bootloader; check out http://palmtelinux.sourceforge.net for more
-          information.
-          Say Y here if you have such a PDA, say NO otherwise.
+	  Support for the Palm Tungsten E PDA.  To boot the kernel, you'll
+	  need a PalmOS compatible bootloader; check out
+	  http://palmtelinux.sourceforge.net/ for more information.
+	  Say Y here if you have this PDA model, say N otherwise.
+
+config MACH_OMAP_PALMZ71
+	bool "Palm Zire71"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	help
+	 Support for the Palm Zire71 PDA. To boot the kernel,
+	 you'll need a PalmOS compatible bootloader; check out
+	 http://hackndev.com/palm/z71 for more informations.
+	 Say Y here if you have such a PDA, say N otherwise.
+
+config MACH_OMAP_PALMTT
+	bool "Palm Tungsten|T"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	help
+	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
+	  need a PalmOS compatible bootloader (Garux); check out
+	  http://www.hackndev.com/palm/tt/ for more information.
+	  Say Y here if you have this PDA model, say N otherwise.
+
+config MACH_SX1
+	bool "Siemens SX1"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	help
+	  Support for the Siemens SX1 phone. To boot the kernel,
+	  you'll need a SX1 compatible bootloader; check out
+	  http://forum.oslik.ru and
+	  http://www.handhelds.org/moin/moin.cgi/SiemensSX1
+	  for more information.
+	  Say Y here if you have such a phone, say NO otherwise.
 
 config MACH_NOKIA770
 	bool "Nokia 770"
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index a8b9a00cea2..391b6f4827f 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -22,8 +22,11 @@ obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o
 obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
+obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
+obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
+obj-$(CONFIG_MACH_SX1)			+= board-sx1.o
 
 ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 # Innovator-1510 FPGA
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8437d065ada..c73ca61e585 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -14,6 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/input.h>
 #include <linux/platform_device.h>
 
 #include <asm/hardware.h>
@@ -23,6 +24,7 @@
 
 #include <asm/arch/board-ams-delta.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/keypad.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/board.h>
@@ -31,6 +33,86 @@
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
 
+static int ams_delta_keymap[] = {
+	KEY(0, 0, KEY_F1),		/* Advert    */
+
+	KEY(3, 0, KEY_COFFEE),		/* Games     */
+	KEY(2, 0, KEY_QUESTION),	/* Directory */
+	KEY(3, 2, KEY_CONNECT),		/* Internet  */
+	KEY(2, 1, KEY_SHOP),		/* Services  */
+	KEY(1, 1, KEY_PHONE),		/* VoiceMail */
+
+	KEY(1, 0, KEY_DELETE),		/* Delete    */
+	KEY(2, 2, KEY_PLAY),		/* Play      */
+	KEY(0, 1, KEY_PAGEUP),		/* Up        */
+	KEY(3, 1, KEY_PAGEDOWN),	/* Down      */
+	KEY(0, 2, KEY_EMAIL),		/* ReadEmail */
+	KEY(1, 2, KEY_STOP),		/* Stop      */
+
+	/* Numeric keypad portion */
+	KEY(7, 0, KEY_KP1),
+	KEY(6, 0, KEY_KP2),
+	KEY(5, 0, KEY_KP3),
+	KEY(7, 1, KEY_KP4),
+	KEY(6, 1, KEY_KP5),
+	KEY(5, 1, KEY_KP6),
+	KEY(7, 2, KEY_KP7),
+	KEY(6, 2, KEY_KP8),
+	KEY(5, 2, KEY_KP9),
+	KEY(6, 3, KEY_KP0),
+	KEY(7, 3, KEY_KPASTERISK),
+	KEY(5, 3, KEY_KPDOT),		/* # key     */
+	KEY(2, 7, KEY_NUMLOCK),		/* Mute      */
+	KEY(1, 7, KEY_KPMINUS),		/* Recall    */
+	KEY(1, 6, KEY_KPPLUS),		/* Redial    */
+	KEY(6, 7, KEY_KPSLASH),		/* Handsfree */
+	KEY(0, 6, KEY_ENTER),		/* Video     */
+
+	KEY(4, 7, KEY_CAMERA),		/* Photo     */
+
+	KEY(4, 0, KEY_F2),		/* Home      */
+	KEY(4, 1, KEY_F3),		/* Office    */
+	KEY(4, 2, KEY_F4),		/* Mobile    */
+	KEY(7, 7, KEY_F5),		/* SMS       */
+	KEY(5, 7, KEY_F6),		/* Email     */
+
+	/* QWERTY portion of keypad */
+	KEY(4, 3, KEY_Q),
+	KEY(3, 3, KEY_W),
+	KEY(2, 3, KEY_E),
+	KEY(1, 3, KEY_R),
+	KEY(0, 3, KEY_T),
+	KEY(7, 4, KEY_Y),
+	KEY(6, 4, KEY_U),
+	KEY(5, 4, KEY_I),
+	KEY(4, 4, KEY_O),
+	KEY(3, 4, KEY_P),
+
+	KEY(2, 4, KEY_A),
+	KEY(1, 4, KEY_S),
+	KEY(0, 4, KEY_D),
+	KEY(7, 5, KEY_F),
+	KEY(6, 5, KEY_G),
+	KEY(5, 5, KEY_H),
+	KEY(4, 5, KEY_J),
+	KEY(3, 5, KEY_K),
+	KEY(2, 5, KEY_L),
+
+	KEY(1, 5, KEY_Z),
+	KEY(0, 5, KEY_X),
+	KEY(7, 6, KEY_C),
+	KEY(6, 6, KEY_V),
+	KEY(5, 6, KEY_B),
+	KEY(4, 6, KEY_N),
+	KEY(3, 6, KEY_M),
+	KEY(2, 6, KEY_SPACE),
+
+	KEY(0, 7, KEY_LEFTSHIFT),	/* Vol up    */
+	KEY(3, 7, KEY_LEFTCTRL),	/* Vol down  */
+
+	0
+};
+
 void ams_delta_latch1_write(u8 mask, u8 value)
 {
 	ams_delta_latch1_reg &= ~mask;
@@ -76,6 +158,10 @@ static struct map_desc ams_delta_io_desc[] __initdata = {
 	}
 };
 
+static struct omap_lcd_config ams_delta_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
 static struct omap_uart_config ams_delta_uart_config __initdata = {
 	.enabled_uarts = 1,
 };
@@ -87,16 +173,50 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 };
 
 static struct omap_board_config_kernel ams_delta_config[] = {
+	{ OMAP_TAG_LCD,		&ams_delta_lcd_config },
 	{ OMAP_TAG_UART,	&ams_delta_uart_config },
 	{ OMAP_TAG_USB,		&ams_delta_usb_config },
 };
 
+static struct resource ams_delta_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_kp_platform_data ams_delta_kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap 	= ams_delta_keymap,
+	.keymapsize	= ARRAY_SIZE(ams_delta_keymap),
+	.delay		= 9,
+};
+
+static struct platform_device ams_delta_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &ams_delta_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(ams_delta_kp_resources),
+	.resource	= ams_delta_kp_resources,
+};
+
+static struct platform_device ams_delta_lcd_device = {
+	.name	= "lcd_ams_delta",
+	.id	= -1,
+};
+
 static struct platform_device ams_delta_led_device = {
 	.name	= "ams-delta-led",
 	.id	= -1
 };
 
 static struct platform_device *ams_delta_devices[] __initdata = {
+	&ams_delta_kp_device,
+	&ams_delta_lcd_device,
 	&ams_delta_led_device,
 };
 
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 2f8f6ecf111..b0921622566 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -140,6 +140,66 @@ static struct platform_device h2_nor_device = {
 	.resource	= &h2_nor_resource,
 };
 
+#if 0	/* REVISIT: Enable when nand_platform_data is applied */
+
+static struct mtd_partition h2_nand_partitions[] = {
+#if 0
+	/* REVISIT:  enable these partitions if you make NAND BOOT
+	 * work on your H2 (rev C or newer); published versions of
+	 * x-load only support P2 and H3.
+	 */
+	{
+		.name		= "xloader",
+		.offset		= 0,
+		.size		= 64 * 1024,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "bootloader",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 256 * 1024,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 192 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * SZ_1M,
+	},
+#endif
+	{
+		.name		= "filesystem",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	},
+};
+
+/* dip switches control NAND chip access:  8 bit, 16 bit, or neither */
+static struct nand_platform_data h2_nand_data = {
+	.options	= NAND_SAMSUNG_LP_OPTIONS,
+	.parts		= h2_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(h2_nand_partitions),
+};
+
+static struct resource h2_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device h2_nand_device = {
+	.name		= "omapnand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &h2_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &h2_nand_resource,
+};
+#endif
+
 static struct resource h2_smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP1610_ETHR_START,		/* Physical */
@@ -219,11 +279,15 @@ static struct resource h2_irda_resources[] = {
 		.flags	= IORESOURCE_IRQ,
 	},
 };
+
+static u64 irda_dmamask = 0xffffffff;
+
 static struct platform_device h2_irda_device = {
 	.name		= "omapirda",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &h2_irda_data,
+		.dma_mask	= &irda_dmamask,
 	},
 	.num_resources	= ARRAY_SIZE(h2_irda_resources),
 	.resource	= h2_irda_resources,
@@ -271,6 +335,7 @@ static struct platform_device h2_mcbsp1_device = {
 
 static struct platform_device *h2_devices[] __initdata = {
 	&h2_nor_device,
+	//&h2_nand_device,
 	&h2_smc91x_device,
 	&h2_irda_device,
 	&h2_kp_device,
@@ -348,6 +413,13 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
 
+#define H2_NAND_RB_GPIO_PIN	62
+
+static int h2_nand_dev_ready(struct nand_platform_data *data)
+{
+	return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN);
+}
+
 static void __init h2_init(void)
 {
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
@@ -362,6 +434,13 @@ static void __init h2_init(void)
 	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
 	h2_nor_resource.end += SZ_32M - 1;
 
+#if 0	/* REVISIT: Enable when nand_platform_data is applied */
+	h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
+	h2_nand_resource.end += SZ_4K - 1;
+	if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN)))
+		h2_nand_data.dev_ready = h2_nand_dev_ready;
+#endif
+
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index add2f703204..4f84ae273a1 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -47,6 +47,8 @@
 #include <asm/arch/keypad.h>
 #include <asm/arch/dma.h>
 #include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
 
 extern int omap_gpio_init(void);
 
@@ -354,11 +356,14 @@ static struct resource h3_irda_resources[] = {
 	},
 };
 
+static u64 irda_dmamask = 0xffffffff;
+
 static struct platform_device h3_irda_device = {
 	.name		= "omapirda",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &h3_irda_data,
+		.dma_mask	= &irda_dmamask,
 	},
 	.num_resources	= ARRAY_SIZE(h3_irda_resources),
 	.resource	= h3_irda_resources,
@@ -369,6 +374,41 @@ static struct platform_device h3_lcd_device = {
 	.id		= -1,
 };
 
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+	.spcr1 = RINTM(3) | RRST,
+	.rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
+	.rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+	.xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
+	.xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+	.srgr1 = FWID(15),
+	.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
+
+	.pcr0  = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
+	//.pcr0 = CLKXP | CLKRP,        /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+	.name                   = "H3 TSC2101",
+	.mcbsp_regs_alsa        = &mcbsp_regs,
+	.codec_configure_dev    = NULL, // tsc2101_configure,
+	.codec_set_samplerate   = NULL, // tsc2101_set_samplerate,
+	.codec_clock_setup      = NULL, // tsc2101_clock_setup,
+	.codec_clock_on         = NULL, // tsc2101_clock_on,
+	.codec_clock_off        = NULL, // tsc2101_clock_off,
+	.get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
+};
+
+static struct platform_device h3_mcbsp1_device = {
+	.name	= "omap_alsa_mcbsp",
+	.id	= 1,
+	.dev = {
+		.platform_data	= &alsa_config,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&nor_device,
 	&nand_device,
@@ -377,6 +417,7 @@ static struct platform_device *devices[] __initdata = {
 	&h3_irda_device,
 	&h3_kp_device,
 	&h3_lcd_device,
+	&h3_mcbsp1_device,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 70014f751bc..22db19a5364 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -33,6 +33,12 @@
 #include <asm/arch/dsp_common.h>
 #include <asm/arch/aic23.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/omapfb.h>
+#include <asm/arch/lcd_mipid.h>
+
+#include "../plat-omap/dsp/dsp_common.h"
+
+#define ADS7846_PENDOWN_GPIO	15
 
 static void __init omap_nokia770_init_irq(void)
 {
@@ -91,9 +97,44 @@ static struct platform_device nokia770_kp_device = {
 };
 
 static struct platform_device *nokia770_devices[] __initdata = {
-        &nokia770_kp_device,
+	&nokia770_kp_device,
+};
+
+static void mipid_shutdown(struct mipid_platform_data *pdata)
+{
+	if (pdata->nreset_gpio != -1) {
+		printk(KERN_INFO "shutdown LCD\n");
+		omap_set_gpio_dataout(pdata->nreset_gpio, 0);
+		msleep(120);
+	}
+}
+
+static struct mipid_platform_data nokia770_mipid_platform_data = {
+	.shutdown = mipid_shutdown,
 };
 
+static void mipid_dev_init(void)
+{
+	const struct omap_lcd_config *conf;
+
+	conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
+	if (conf != NULL) {
+		nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
+		nokia770_mipid_platform_data.data_lines = conf->data_lines;
+	}
+}
+
+static void ads7846_dev_init(void)
+{
+	if (omap_request_gpio(ADS7846_PENDOWN_GPIO) < 0)
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !omap_get_gpio_datain(ADS7846_PENDOWN_GPIO);
+}
+
 static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
 	.x_max		= 0x0fff,
 	.y_max		= 0x0fff,
@@ -101,14 +142,17 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata =
 	.pressure_max	= 255,
 	.debounce_max	= 10,
 	.debounce_tol	= 3,
+	.debounce_rep	= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
 };
 
 static struct spi_board_info nokia770_spi_board_info[] __initdata = {
 	[0] = {
-		.modalias		= "lcd_mipid",
+		.modalias       = "lcd_mipid",
 		.bus_num        = 2,
 		.chip_select    = 3,
 		.max_speed_hz   = 12000000,
+		.platform_data	= &nokia770_mipid_platform_data,
 	},
 	[1] = {
 		.modalias       = "ads7846",
@@ -153,6 +197,7 @@ static struct omap_board_config_kernel nokia770_config[] = {
 	{ OMAP_TAG_MMC,		&nokia770_mmc_config },
 };
 
+#if	defined(CONFIG_OMAP_DSP)
 /*
  * audio power control
  */
@@ -183,7 +228,7 @@ static void nokia770_audio_pwr_up(void)
 	clk_enable(dspxor_ck);
 
 	/* Turn on codec */
-	tlv320aic23_power_up();
+	aic23_power_up();
 
 	if (omap_get_gpio_datain(HEADPHONE_GPIO))
 		/* HP not connected, turn on amplifier */
@@ -197,7 +242,7 @@ static void codec_delayed_power_down(struct work_struct *work)
 {
 	down(&audio_pwr_sem);
 	if (audio_pwr_state == -1)
-		tlv320aic23_power_down();
+		aic23_power_down();
 	clk_disable(dspxor_ck);
 	up(&audio_pwr_sem);
 }
@@ -213,7 +258,8 @@ static void nokia770_audio_pwr_down(void)
 	schedule_delayed_work(&codec_power_down_work, HZ / 20);	/* 50ms */
 }
 
-void nokia770_audio_pwr_up_request(int stage)
+static int
+nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage)
 {
 	down(&audio_pwr_sem);
 	if (audio_pwr_state == -1)
@@ -221,9 +267,11 @@ void nokia770_audio_pwr_up_request(int stage)
 	/* force audio_pwr_state = 0, even if it was 1. */
 	audio_pwr_state = 0;
 	up(&audio_pwr_sem);
+	return 0;
 }
 
-void nokia770_audio_pwr_down_request(int stage)
+static int
+nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
 {
 	down(&audio_pwr_sem);
 	switch (stage) {
@@ -239,8 +287,39 @@ void nokia770_audio_pwr_down_request(int stage)
 		break;
 	}
 	up(&audio_pwr_sem);
+	return 0;
 }
 
+static struct dsp_kfunc_device nokia770_audio_device = {
+	.name	 = "audio",
+	.type	 = DSP_KFUNC_DEV_TYPE_AUDIO,
+	.enable  = nokia770_audio_pwr_up_request,
+	.disable = nokia770_audio_pwr_down_request,
+};
+
+static __init int omap_dsp_init(void)
+{
+	int ret;
+
+	dspxor_ck = clk_get(0, "dspxor_ck");
+	if (IS_ERR(dspxor_ck)) {
+		printk(KERN_ERR "couldn't acquire dspxor_ck\n");
+		return PTR_ERR(dspxor_ck);
+	}
+
+	ret = dsp_kfunc_device_register(&nokia770_audio_device);
+	if (ret) {
+		printk(KERN_ERR
+		       "KFUNC device registration faild: %s\n",
+		       nokia770_audio_device.name);
+		goto out;
+	}
+	return 0;
+ out:
+	return ret;
+}
+#endif	/* CONFIG_OMAP_DSP */
+
 static void __init omap_nokia770_init(void)
 {
 	nokia770_config[0].data = &nokia770_usb_config;
@@ -250,10 +329,11 @@ static void __init omap_nokia770_init(void)
 				ARRAY_SIZE(nokia770_spi_board_info));
 	omap_board_config = nokia770_config;
 	omap_board_config_size = ARRAY_SIZE(nokia770_config);
+	omap_gpio_init();
 	omap_serial_init();
-	omap_dsp_audio_pwr_up_request = nokia770_audio_pwr_up_request;
-	omap_dsp_audio_pwr_down_request = nokia770_audio_pwr_down_request;
-	dspxor_ck = clk_get(0, "dspxor_ck");
+	omap_dsp_init();
+	ads7846_dev_init();
+	mipid_dev_init();
 }
 
 static void __init omap_nokia770_map_io(void)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a61bf455ee0..5db182da322 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -29,6 +29,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
@@ -308,6 +309,18 @@ static struct platform_device osk5912_kp_device = {
 	.resource	= osk5912_kp_resources,
 };
 
+static struct omap_backlight_config mistral_bl_data = {
+	.default_intensity	= 0xa0,
+};
+
+static struct platform_device mistral_bl_device = {
+	.name		= "omap-bl",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &mistral_bl_data,
+	},
+};
+
 static struct platform_device osk5912_lcd_device = {
 	.name		= "lcd_osk",
 	.id		= -1,
@@ -315,6 +328,7 @@ static struct platform_device osk5912_lcd_device = {
 
 static struct platform_device *mistral_devices[] __initdata = {
 	&osk5912_kp_device,
+	&mistral_bl_device,
 	&osk5912_lcd_device,
 };
 
@@ -358,6 +372,38 @@ static void __init osk_mistral_init(void)
 	 * can't talk to the ads or even the i2c eeprom.
 	 */
 
+	/* parallel camera interface */
+	omap_cfg_reg(J15_1610_CAM_LCLK);
+	omap_cfg_reg(J18_1610_CAM_D7);
+	omap_cfg_reg(J19_1610_CAM_D6);
+	omap_cfg_reg(J14_1610_CAM_D5);
+	omap_cfg_reg(K18_1610_CAM_D4);
+	omap_cfg_reg(K19_1610_CAM_D3);
+	omap_cfg_reg(K15_1610_CAM_D2);
+	omap_cfg_reg(K14_1610_CAM_D1);
+	omap_cfg_reg(L19_1610_CAM_D0);
+	omap_cfg_reg(L18_1610_CAM_VS);
+	omap_cfg_reg(L15_1610_CAM_HS);
+	omap_cfg_reg(M19_1610_CAM_RSTZ);
+	omap_cfg_reg(Y15_1610_CAM_OUTCLK);
+
+	/* serial camera interface */
+	omap_cfg_reg(H19_1610_CAM_EXCLK);
+	omap_cfg_reg(W13_1610_CCP_CLKM);
+	omap_cfg_reg(Y12_1610_CCP_CLKP);
+	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
+	// omap_cfg_reg(Y14_1610_CCP_DATAM);
+	omap_cfg_reg(W14_1610_CCP_DATAP);
+
+	/* CAM_PWDN */
+	if (omap_request_gpio(11) == 0) {
+		omap_cfg_reg(N20_1610_GPIO11);
+		omap_set_gpio_direction(11, 0 /* out */);
+		omap_set_gpio_dataout(11, 0 /* off */);
+	} else
+		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
+
+
 	// omap_cfg_reg(P19_1610_GPIO6);	// BUSY
 	omap_cfg_reg(P20_1610_GPIO4);	// PENIRQ
 	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
@@ -388,6 +434,15 @@ static void __init osk_mistral_init(void)
 	} else
 		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
 
+	/* LCD:  backlight, and power; power controls other devices on the
+	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
+	 */
+	omap_cfg_reg(PWL);
+	if (omap_request_gpio(2) == 0) {
+		omap_set_gpio_direction(2, 0 /* out */);
+		omap_set_gpio_dataout(2, 1 /* on */);
+	}
+
 	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
 }
 #else
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 01582418562..2f9d00a0013 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -17,49 +17,189 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/input.h>
 #include <linux/platform_device.h>
-#include <linux/notifier.h>
-#include <linux/clk.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tsc2102.h>
+#include <linux/interrupt.h>
 
+#include <asm/apm.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/flash.h>
 
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/dma.h>
 #include <asm/arch/board.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/keypad.h>
 #include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
 
-static void __init omap_generic_init_irq(void)
+static void __init omap_palmte_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
+	omap_gpio_init();
 }
 
+static int palmte_keymap[] = {
+	KEY(0, 0, KEY_F1),
+	KEY(0, 1, KEY_F2),
+	KEY(0, 2, KEY_F3),
+	KEY(0, 3, KEY_F4),
+	KEY(0, 4, KEY_POWER),
+	KEY(1, 0, KEY_LEFT),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_UP),
+	KEY(1, 3, KEY_RIGHT),
+	KEY(1, 4, KEY_CENTER),
+	0,
+};
+
+static struct omap_kp_platform_data palmte_kp_data = {
+	.rows	= 8,
+	.cols	= 8,
+	.keymap = palmte_keymap,
+	.rep	= 1,
+	.delay	= 12,
+};
+
+static struct resource palmte_kp_resources[] = {
+	[0]	= {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device palmte_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmte_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(palmte_kp_resources),
+	.resource	= palmte_kp_resources,
+};
+
+static struct mtd_partition palmte_rom_partitions[] = {
+	/* PalmOS "Small ROM", contains the bootloader and the debugger */
+	{
+		.name		= "smallrom",
+		.offset		= 0,
+		.size		= 0xa000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
+	{
+		.name		= "bigrom",
+		.offset		= SZ_128K,
+		/*
+		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
+		 * 0x7b0000 bytes in the English-only ("enUS") version.
+		 */
+		.size		= 0x7b0000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct flash_platform_data palmte_rom_data = {
+	.map_name	= "map_rom",
+	.width		= 2,
+	.parts		= palmte_rom_partitions,
+	.nr_parts	= ARRAY_SIZE(palmte_rom_partitions),
+};
+
+static struct resource palmte_rom_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_8M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device palmte_rom_device = {
+	.name		= "omapflash",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmte_rom_data,
+	},
+	.num_resources	= 1,
+	.resource	= &palmte_rom_resource,
+};
+
 static struct platform_device palmte_lcd_device = {
 	.name		= "lcd_palmte",
 	.id		= -1,
 };
 
+static struct omap_backlight_config palmte_backlight_config = {
+	.default_intensity	= 0xa0,
+};
+
+static struct platform_device palmte_backlight_device = {
+	.name		= "omap-bl",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmte_backlight_config,
+	},
+};
+
+static struct omap_irda_config palmte_irda_config = {
+	.transceiver_cap	= IR_SIRMODE,
+	.rx_channel		= OMAP_DMA_UART3_RX,
+	.tx_channel		= OMAP_DMA_UART3_TX,
+	.dest_start		= UART3_THR,
+	.src_start		= UART3_RHR,
+	.tx_trigger		= 0,
+	.rx_trigger		= 0,
+};
+
+static struct resource palmte_irda_resources[] = {
+	[0]	= {
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device palmte_irda_device = {
+	.name		= "omapirda",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmte_irda_config,
+	},
+	.num_resources	= ARRAY_SIZE(palmte_irda_resources),
+	.resource	= palmte_irda_resources,
+};
+
 static struct platform_device *devices[] __initdata = {
+	&palmte_rom_device,
+	&palmte_kp_device,
 	&palmte_lcd_device,
+	&palmte_backlight_device,
+	&palmte_irda_device,
 };
 
 static struct omap_usb_config palmte_usb_config __initdata = {
-	.register_dev	= 1,
+	.register_dev	= 1,	/* Mini-B only receptacle */
 	.hmc_mode	= 0,
-	.pins[0]	= 3,
+	.pins[0]	= 2,
 };
 
 static struct omap_mmc_config palmte_mmc_config __initdata = {
-	.mmc [0] = {
+	.mmc[0]		= {
 		.enabled 	= 1,
-		.wire4		= 1,
-		.wp_pin		= OMAP_MPUIO(3),
-		.power_pin	= -1,
-		.switch_pin	= -1,
+		.wp_pin		= PALMTE_MMC_WP_GPIO,
+		.power_pin	= PALMTE_MMC_POWER_GPIO,
+		.switch_pin	= PALMTE_MMC_SWITCH_GPIO,
 	},
 };
 
@@ -67,21 +207,222 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
+static struct omap_uart_config palmte_uart_config __initdata = {
+	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
+};
+
+static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
+	.spcr2	= FRST | GRST | XRST | XINTM(3),
+	.xcr2	= XDATDLY(1) | XFIG,
+	.xcr1	= XWDLEN1(OMAP_MCBSP_WORD_32),
+	.pcr0	= SCLKME | FSXP | CLKXP,
+};
+
+static struct omap_alsa_codec_config palmte_alsa_config = {
+	.name			= "TSC2102 audio",
+	.mcbsp_regs_alsa	= &palmte_mcbsp1_regs,
+	.codec_configure_dev	= NULL,	/* tsc2102_configure, */
+	.codec_set_samplerate	= NULL,	/* tsc2102_set_samplerate, */
+	.codec_clock_setup	= NULL,	/* tsc2102_clock_setup, */
+	.codec_clock_on		= NULL,	/* tsc2102_clock_on, */
+	.codec_clock_off	= NULL,	/* tsc2102_clock_off, */
+	.get_default_samplerate	= NULL,	/* tsc2102_get_default_samplerate, */
+};
+
+#ifdef CONFIG_APM
+/*
+ * Values measured in 10 minute intervals averaged over 10 samples.
+ * May differ slightly from device to device but should be accurate
+ * enough to give basic idea of battery life left and trigger
+ * potential alerts.
+ */
+static const int palmte_battery_sample[] = {
+	2194, 2157, 2138, 2120,
+	2104, 2089, 2075, 2061,
+	2048, 2038, 2026, 2016,
+	2008, 1998, 1989, 1980,
+	1970, 1958, 1945, 1928,
+	1910, 1888, 1860, 1827,
+	1791, 1751, 1709, 1656,
+};
+
+#define INTERVAL		10
+#define BATTERY_HIGH_TRESHOLD	66
+#define BATTERY_LOW_TRESHOLD	33
+
+static void palmte_get_power_status(struct apm_power_info *info, int *battery)
+{
+	int charging, batt, hi, lo, mid;
+
+	charging = !omap_get_gpio_datain(PALMTE_DC_GPIO);
+	batt = battery[0];
+	if (charging)
+		batt -= 60;
+
+	hi = ARRAY_SIZE(palmte_battery_sample);
+	lo = 0;
+
+	info->battery_flag = 0;
+	info->units = APM_UNITS_MINS;
+
+	if (batt > palmte_battery_sample[lo]) {
+		info->battery_life = 100;
+		info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample);
+	} else if (batt <= palmte_battery_sample[hi - 1]) {
+		info->battery_life = 0;
+		info->time = 0;
+	} else {
+		while (hi > lo + 1) {
+			mid = (hi + lo) >> 2;
+			if (batt <= palmte_battery_sample[mid])
+				lo = mid;
+			else
+				hi = mid;
+		}
+
+		mid = palmte_battery_sample[lo] - palmte_battery_sample[hi];
+		hi = palmte_battery_sample[lo] - batt;
+		info->battery_life = 100 - (100 * lo + 100 * hi / mid) /
+			ARRAY_SIZE(palmte_battery_sample);
+		info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) -
+				lo) - INTERVAL * hi / mid;
+	}
+
+	if (charging) {
+		info->ac_line_status = APM_AC_ONLINE;
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+		info->battery_flag |= APM_BATTERY_FLAG_CHARGING;
+	} else {
+		info->ac_line_status = APM_AC_OFFLINE;
+		if (info->battery_life > BATTERY_HIGH_TRESHOLD)
+			info->battery_status = APM_BATTERY_STATUS_HIGH;
+		else if (info->battery_life > BATTERY_LOW_TRESHOLD)
+			info->battery_status = APM_BATTERY_STATUS_LOW;
+		else
+			info->battery_status = APM_BATTERY_STATUS_CRITICAL;
+	}
+
+	if (info->battery_life > BATTERY_HIGH_TRESHOLD)
+		info->battery_flag |= APM_BATTERY_FLAG_HIGH;
+	else if (info->battery_life > BATTERY_LOW_TRESHOLD)
+		info->battery_flag |= APM_BATTERY_FLAG_LOW;
+	else
+		info->battery_flag |= APM_BATTERY_FLAG_CRITICAL;
+}
+#else
+#define palmte_get_power_status	NULL
+#endif
+
+static struct tsc2102_config palmte_tsc2102_config = {
+	.use_internal	= 0,
+	.monitor	= TSC_BAT1 | TSC_AUX | TSC_TEMP,
+	.temp_at25c	= { 2200, 2615 },
+	.apm_report	= palmte_get_power_status,
+	.alsa_config	= &palmte_alsa_config,
+};
+
 static struct omap_board_config_kernel palmte_config[] = {
-	{ OMAP_TAG_USB, &palmte_usb_config },
-	{ OMAP_TAG_MMC,	&palmte_mmc_config },
-	{ OMAP_TAG_LCD,	&palmte_lcd_config },
+	{ OMAP_TAG_USB,		&palmte_usb_config },
+	{ OMAP_TAG_MMC,		&palmte_mmc_config },
+	{ OMAP_TAG_LCD,		&palmte_lcd_config },
+	{ OMAP_TAG_UART,	&palmte_uart_config },
 };
 
-static void __init omap_generic_init(void)
+static struct spi_board_info palmte_spi_info[] __initdata = {
+	{
+		.modalias	= "tsc2102",
+		.bus_num	= 2,	/* uWire (officially) */
+		.chip_select	= 0,	/* As opposed to 3 */
+		.irq		= OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
+		.platform_data	= &palmte_tsc2102_config,
+		.max_speed_hz	= 8000000,
+	},
+};
+
+/* Periodically check for changes on important input pins */
+struct timer_list palmte_pin_timer;
+int prev_power, prev_headphones;
+
+static void palmte_pin_handler(unsigned long data) {
+	int power, headphones;
+
+	power = !omap_get_gpio_datain(PALMTE_DC_GPIO);
+	headphones = omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);
+
+	if (power && !prev_power)
+		printk(KERN_INFO "PM: cable connected\n");
+	else if (!power && prev_power)
+		printk(KERN_INFO "PM: cable disconnected\n");
+
+	if (headphones && !prev_headphones) {
+		/* Headphones connected, disable speaker */
+		omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0);
+		printk(KERN_INFO "PM: speaker off\n");
+	} else if (!headphones && prev_headphones) {
+		/* Headphones unplugged, re-enable speaker */
+		omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1);
+		printk(KERN_INFO "PM: speaker on\n");
+	}
+
+	prev_power = power;
+	prev_headphones = headphones;
+	mod_timer(&palmte_pin_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static void __init palmte_gpio_setup(void)
+{
+	/* Set TSC2102 PINTDAV pin as input */
+	if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) {
+		printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
+		return;
+	}
+	omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);
+
+	/* Monitor cable-connected signals */
+	if (omap_request_gpio(PALMTE_DC_GPIO) ||
+			omap_request_gpio(PALMTE_USB_OR_DC_GPIO) ||
+			omap_request_gpio(PALMTE_USBDETECT_GPIO)) {
+		printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
+		return;
+	}
+	omap_set_gpio_direction(PALMTE_DC_GPIO, 1);
+	omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);
+	omap_set_gpio_direction(PALMTE_USBDETECT_GPIO, 1);
+
+	/* Set speaker-enable pin as output */
+	if (omap_request_gpio(PALMTE_SPEAKER_GPIO)) {
+		printk(KERN_ERR "Could not reserve speaker GPIO!\n");
+		return;
+	}
+	omap_set_gpio_direction(PALMTE_SPEAKER_GPIO, 0);
+
+	/* Monitor the headphones-connected signal */
+	if (omap_request_gpio(PALMTE_HEADPHONES_GPIO)) {
+		printk(KERN_ERR "Could not reserve headphones signal GPIO!\n");
+		return;
+	}
+	omap_set_gpio_direction(PALMTE_HEADPHONES_GPIO, 1);
+
+	prev_power = omap_get_gpio_datain(PALMTE_DC_GPIO);
+	prev_headphones = !omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);
+	setup_timer(&palmte_pin_timer, palmte_pin_handler, 0);
+	palmte_pin_handler(0);
+}
+
+static void __init omap_palmte_init(void)
 {
 	omap_board_config = palmte_config;
 	omap_board_config_size = ARRAY_SIZE(palmte_config);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
+
+	omap_serial_init();
+	palmte_gpio_setup();
 }
 
-static void __init omap_generic_map_io(void)
+static void __init omap_palmte_map_io(void)
 {
 	omap1_map_common_io();
 }
@@ -90,8 +431,8 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.phys_io	= 0xfff00000,
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
-	.map_io		= omap_generic_map_io,
-	.init_irq	= omap_generic_init_irq,
-	.init_machine	= omap_generic_init,
+	.map_io		= omap_palmte_map_io,
+	.init_irq	= omap_palmte_init_irq,
+	.init_machine	= omap_palmte_init,
 	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
new file mode 100644
index 00000000000..e47010fec27
--- /dev/null
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -0,0 +1,357 @@
+/*
+ * linux/arch/arm/mach-omap1/board-palmtt.c
+ *
+ * Modified from board-palmtt2.c
+ *
+ * Modified and amended for Palm Tungsten|T
+ * by Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+#include <linux/clk.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/leds.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/led.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/common.h>
+#include <asm/arch/omap-alsa.h>
+
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+static int palmtt_keymap[] = {
+	KEY(0, 0, KEY_ESC),
+	KEY(0, 1, KEY_SPACE),
+	KEY(0, 2, KEY_LEFTCTRL),
+	KEY(0, 3, KEY_TAB),
+	KEY(0, 4, KEY_ENTER),
+	KEY(1, 0, KEY_LEFT),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_UP),
+	KEY(1, 3, KEY_RIGHT),
+	KEY(2, 0, KEY_SLEEP),
+	KEY(2, 4, KEY_Y),
+	0
+};
+
+static struct mtd_partition palmtt_partitions[] = {
+	{
+		.name		= "write8k",
+		.offset		= 0,
+		.size		= SZ_8K,
+		.mask_flags	= 0,
+	},
+	{
+		.name		= "PalmOS-BootLoader(ro)",
+		.offset		= SZ_8K,
+		.size		= 7 * SZ_8K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "u-boot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * SZ_8K,
+		.mask_flags	= 0,
+	},
+	{
+		.name		= "PalmOS-FS(ro)",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "u-boot(rez)",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= 0
+	},
+	{
+		.name		= "empty",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct flash_platform_data palmtt_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= palmtt_partitions,
+	.nr_parts	= ARRAY_SIZE(palmtt_partitions),
+};
+
+static struct resource palmtt_flash_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_8M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device palmtt_flash_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &palmtt_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &palmtt_flash_resource,
+};
+
+#define DEFAULT_BITPERSAMPLE 16
+
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+	.spcr2		= FREE | FRST | GRST | XRST | XINTM(3),
+	.spcr1		= RINTM(3) | RRST,
+	.rcr2		= RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+				RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+	.rcr1		= RFRLEN1(OMAP_MCBSP_WORD_8) |
+				RWDLEN1(OMAP_MCBSP_WORD_16),
+	.xcr2		= XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+				XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+	.xcr1		= XFRLEN1(OMAP_MCBSP_WORD_8) |
+				XWDLEN1(OMAP_MCBSP_WORD_16),
+	.srgr1		= FWID(DEFAULT_BITPERSAMPLE - 1),
+	.srgr2		= GSYNC | CLKSP | FSGM |
+				FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+	.pcr0		= CLKXP | CLKRP,	/* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+	.name			= "PalmTT AIC23",
+	.mcbsp_regs_alsa	= &mcbsp_regs,
+	.codec_configure_dev	= NULL, // aic23_configure,
+	.codec_set_samplerate	= NULL, // aic23_set_samplerate,
+	.codec_clock_setup	= NULL, // aic23_clock_setup,
+	.codec_clock_on		= NULL, // aic23_clock_on,
+	.codec_clock_off	= NULL, // aic23_clock_off,
+	.get_default_samplerate	= NULL, // aic23_get_default_samplerate,
+};
+
+static struct platform_device palmtt_mcbsp1_device = {
+	.name	= "omap_alsa_mcbsp",
+	.id	= 1,
+	.dev	= {
+		.platform_data	= &alsa_config,
+	},
+};
+
+static struct resource palmtt_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_kp_platform_data palmtt_kp_data = {
+	.rows	= 6,
+	.cols	= 3,
+	.keymap = palmtt_keymap,
+};
+
+static struct platform_device palmtt_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &palmtt_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(palmtt_kp_resources),
+	.resource	= palmtt_kp_resources,
+};
+
+static struct platform_device palmtt_lcd_device = {
+	.name		= "lcd_palmtt",
+	.id		= -1,
+};
+static struct omap_irda_config palmtt_irda_config = {
+	.transceiver_cap	= IR_SIRMODE,
+	.rx_channel		= OMAP_DMA_UART3_RX,
+	.tx_channel		= OMAP_DMA_UART3_TX,
+	.dest_start		= UART3_THR,
+	.src_start		= UART3_RHR,
+	.tx_trigger		= 0,
+	.rx_trigger		= 0,
+};
+
+static struct resource palmtt_irda_resources[] = {
+	[0]	= {
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device palmtt_irda_device = {
+	.name		= "omapirda",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmtt_irda_config,
+	},
+	.num_resources	= ARRAY_SIZE(palmtt_irda_resources),
+	.resource	= palmtt_irda_resources,
+};
+
+static struct platform_device palmtt_spi_device = {
+	.name		= "spi_palmtt",
+	.id		= -1,
+};
+
+static struct omap_backlight_config palmtt_backlight_config = {
+	.default_intensity	= 0xa0,
+};
+
+static struct platform_device palmtt_backlight_device = {
+	.name		= "omap-bl",
+	.id		= -1,
+	.dev		= {
+		.platform_data= &palmtt_backlight_config,
+	},
+};
+
+static struct omap_led_config palmtt_led_config[] = {
+	{
+		.cdev	= {
+			.name	= "palmtt:led0",
+		},
+		.gpio	= PALMTT_LED_GPIO,
+	},
+};
+
+static struct omap_led_platform_data palmtt_led_data = {
+	.nr_leds	= ARRAY_SIZE(palmtt_led_config),
+	.leds		= palmtt_led_config,
+};
+
+static struct platform_device palmtt_led_device = {
+	.name	= "omap-led",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtt_led_data,
+	},
+};
+
+static struct platform_device *palmtt_devices[] __initdata = {
+	&palmtt_flash_device,
+	&palmtt_mcbsp1_device,
+	&palmtt_kp_device,
+	&palmtt_lcd_device,
+	&palmtt_irda_device,
+	&palmtt_spi_device,
+	&palmtt_backlight_device,
+	&palmtt_led_device,
+};
+
+static int palmtt_get_pendown_state(void)
+{
+	return !omap_get_gpio_datain(6);
+}
+
+static const struct ads7846_platform_data palmtt_ts_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.get_pendown_state	= palmtt_get_pendown_state,
+};
+
+static struct spi_board_info __initdata palmtt_boardinfo[] = {
+	{
+		/* MicroWire (bus 2) CS0 has an ads7846e */
+		.modalias	= "ads7846",
+		.platform_data	= &palmtt_ts_info,
+		.irq		= OMAP_GPIO_IRQ(6),
+		.max_speed_hz	= 120000	/* max sample rate at 3V */
+					* 26	/* command + data + overhead */,
+		.bus_num	= 2,
+		.chip_select	= 0,
+	}
+};
+
+static void __init omap_palmtt_init_irq(void)
+{
+	omap1_init_common_hw();
+	omap_init_irq();
+}
+
+static struct omap_usb_config palmtt_usb_config __initdata = {
+	.register_dev	= 1,
+	.hmc_mode	= 0,
+	.pins[0]	= 2,
+};
+
+static struct omap_lcd_config palmtt_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_uart_config palmtt_uart_config __initdata = {
+	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
+};
+
+static struct omap_board_config_kernel palmtt_config[] = {
+	{ OMAP_TAG_USB,		&palmtt_usb_config	},
+	{ OMAP_TAG_LCD,		&palmtt_lcd_config	},
+	{ OMAP_TAG_UART,	&palmtt_uart_config	},
+};
+
+static void __init omap_mpu_wdt_mode(int mode) {
+	if (mode)
+		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
+	else {
+		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
+		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
+	}
+}
+
+static void __init omap_palmtt_init(void)
+{
+	omap_mpu_wdt_mode(0);
+
+	omap_board_config = palmtt_config;
+	omap_board_config_size = ARRAY_SIZE(palmtt_config);
+
+	platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
+
+	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
+	omap_serial_init();
+}
+
+static void __init omap_palmtt_map_io(void)
+{
+	omap1_map_common_io();
+}
+
+MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_palmtt_map_io,
+	.init_irq	= omap_palmtt_init_irq,
+	.init_machine	= omap_palmtt_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
new file mode 100644
index 00000000000..c275d517764
--- /dev/null
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -0,0 +1,383 @@
+/*
+ * linux/arch/arm/mach-omap1/board-palmz71.c
+ *
+ * Modified from board-generic.c
+ *
+ * Support for the Palm Zire71 PDA.
+ *
+ * Original version : Laurent Gonzalez
+ *
+ * Modified for zire71 : Marek Vasut
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/common.h>
+#include <asm/arch/omap-alsa.h>
+
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+static void __init
+omap_palmz71_init_irq(void)
+{
+	omap1_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static int palmz71_keymap[] = {
+	KEY(0, 0, KEY_F1),
+	KEY(0, 1, KEY_F2),
+	KEY(0, 2, KEY_F3),
+	KEY(0, 3, KEY_F4),
+	KEY(0, 4, KEY_POWER),
+	KEY(1, 0, KEY_LEFT),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_UP),
+	KEY(1, 3, KEY_RIGHT),
+	KEY(1, 4, KEY_CENTER),
+	KEY(2, 0, KEY_CAMERA),
+	0,
+};
+
+static struct omap_kp_platform_data palmz71_kp_data = {
+	.rows	= 8,
+	.cols	= 8,
+	.keymap	= palmz71_keymap,
+	.rep	= 1,
+	.delay	= 80,
+};
+
+static struct resource palmz71_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device palmz71_kp_device = {
+	.name	= "omap-keypad",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmz71_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(palmz71_kp_resources),
+	.resource	= palmz71_kp_resources,
+};
+
+static struct mtd_partition palmz71_rom_partitions[] = {
+	/* PalmOS "Small ROM", contains the bootloader and the debugger */
+	{
+		.name		= "smallrom",
+		.offset		= 0,
+		.size		= 0xa000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
+	{
+		.name	= "bigrom",
+		.offset	= SZ_128K,
+		/*
+		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
+		 * 0x7b0000 bytes in the English-only ("enUS") version.
+		 */
+		.size		= 0x7b0000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct flash_platform_data palmz71_rom_data = {
+	.map_name	= "map_rom",
+	.name		= "onboardrom",
+	.width		= 2,
+	.parts		= palmz71_rom_partitions,
+	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
+};
+
+static struct resource palmz71_rom_resource = {
+	.start	= OMAP_CS0_PHYS,
+	.end	= OMAP_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device palmz71_rom_device = {
+	.name	= "omapflash",
+	.id	= -1,
+	.dev = {
+		.platform_data = &palmz71_rom_data,
+	},
+	.num_resources	= 1,
+	.resource	= &palmz71_rom_resource,
+};
+
+static struct platform_device palmz71_lcd_device = {
+	.name	= "lcd_palmz71",
+	.id	= -1,
+};
+
+static struct omap_irda_config palmz71_irda_config = {
+	.transceiver_cap	= IR_SIRMODE,
+	.rx_channel		= OMAP_DMA_UART3_RX,
+	.tx_channel		= OMAP_DMA_UART3_TX,
+	.dest_start		= UART3_THR,
+	.src_start		= UART3_RHR,
+	.tx_trigger		= 0,
+	.rx_trigger		= 0,
+};
+
+static struct resource palmz71_irda_resources[] = {
+	[0] = {
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device palmz71_irda_device = {
+	.name	= "omapirda",
+	.id	= -1,
+	.dev = {
+		.platform_data = &palmz71_irda_config,
+	},
+	.num_resources	= ARRAY_SIZE(palmz71_irda_resources),
+	.resource	= palmz71_irda_resources,
+};
+
+static struct platform_device palmz71_spi_device = {
+	.name	= "spi_palmz71",
+	.id	= -1,
+};
+
+#define DEFAULT_BITPERSAMPLE 16
+
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+	.spcr2	= FREE | FRST | GRST | XRST | XINTM(3),
+	.spcr1	= RINTM(3) | RRST,
+	.rcr2	= RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+			RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+	.rcr1	= RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+	.xcr2	= XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+			XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+	.xcr1	= XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+	.srgr1	= FWID(DEFAULT_BITPERSAMPLE - 1),
+	.srgr2	= GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+	.pcr0	= CLKXP | CLKRP,	/* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+	.name			= "PalmZ71 AIC23",
+	.mcbsp_regs_alsa	= &mcbsp_regs,
+	.codec_configure_dev	= NULL,	/* aic23_configure */
+	.codec_set_samplerate	= NULL,	/* aic23_set_samplerate */
+	.codec_clock_setup	= NULL,	/* aic23_clock_setup */
+	.codec_clock_on		= NULL,	/* aic23_clock_on */
+	.codec_clock_off	= NULL,	/* aic23_clock_off */
+	.get_default_samplerate	= NULL,	/* aic23_get_default_samplerate */
+};
+
+static struct platform_device palmz71_mcbsp1_device = {
+	.name	= "omap_alsa_mcbsp",
+	.id	= 1,
+	.dev = {
+		.platform_data = &alsa_config,
+	},
+};
+
+static struct omap_backlight_config palmz71_backlight_config = {
+	.default_intensity	= 0xa0,
+};
+
+static struct platform_device palmz71_backlight_device = {
+	.name	= "omap-bl",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmz71_backlight_config,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&palmz71_rom_device,
+	&palmz71_kp_device,
+	&palmz71_mcbsp1_device,
+	&palmz71_lcd_device,
+	&palmz71_irda_device,
+	&palmz71_spi_device,
+	&palmz71_backlight_device,
+};
+
+static int
+palmz71_get_pendown_state(void)
+{
+	return !omap_get_gpio_datain(PALMZ71_PENIRQ_GPIO);
+}
+
+static const struct ads7846_platform_data palmz71_ts_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.get_pendown_state	= palmz71_get_pendown_state,
+};
+
+static struct spi_board_info __initdata palmz71_boardinfo[] = { {
+	/* MicroWire (bus 2) CS0 has an ads7846e */
+	.modalias	= "ads7846",
+	.platform_data	= &palmz71_ts_info,
+	.irq		= OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO),
+	.max_speed_hz	= 120000	/* max sample rate at 3V */
+				* 26	/* command + data + overhead */,
+	.bus_num	= 2,
+	.chip_select	= 0,
+} };
+
+static struct omap_usb_config palmz71_usb_config __initdata = {
+	.register_dev	= 1,	/* Mini-B only receptacle */
+	.hmc_mode	= 0,
+	.pins[0]	= 2,
+};
+
+static struct omap_mmc_config palmz71_mmc_config __initdata = {
+	.mmc[0] = {
+		.enabled	= 1,
+		.wire4		= 0,
+		.wp_pin		= PALMZ71_MMC_WP_GPIO,
+		.power_pin	= -1,
+		.switch_pin	= PALMZ71_MMC_IN_GPIO,
+	},
+};
+
+static struct omap_lcd_config palmz71_lcd_config __initdata = {
+	.ctrl_name = "internal",
+};
+
+static struct omap_uart_config palmz71_uart_config __initdata = {
+	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
+};
+
+static struct omap_board_config_kernel palmz71_config[] = {
+	{OMAP_TAG_USB,	&palmz71_usb_config},
+	{OMAP_TAG_MMC,	&palmz71_mmc_config},
+	{OMAP_TAG_LCD,	&palmz71_lcd_config},
+	{OMAP_TAG_UART,	&palmz71_uart_config},
+};
+
+static irqreturn_t
+palmz71_powercable(int irq, void *dev_id)
+{
+	if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
+		printk(KERN_INFO "PM: Power cable connected\n");
+		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+				IRQT_FALLING);
+	} else {
+		printk(KERN_INFO "PM: Power cable disconnected\n");
+		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+				IRQT_RISING);
+	}
+	return IRQ_HANDLED;
+}
+
+static void __init
+omap_mpu_wdt_mode(int mode)
+{
+	if (mode)
+		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
+	else {
+		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
+		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
+	}
+}
+
+static void __init
+palmz71_gpio_setup(int early)
+{
+	if (early) {
+		/* Only set GPIO1 so we have a working serial */
+		omap_set_gpio_dataout(1, 1);
+		omap_set_gpio_direction(1, 0);
+	} else {
+		/* Set MMC/SD host WP pin as input */
+		if (omap_request_gpio(PALMZ71_MMC_WP_GPIO)) {
+			printk(KERN_ERR "Could not reserve WP GPIO!\n");
+			return;
+		}
+		omap_set_gpio_direction(PALMZ71_MMC_WP_GPIO, 1);
+
+		/* Monitor the Power-cable-connected signal */
+		if (omap_request_gpio(PALMZ71_USBDETECT_GPIO)) {
+			printk(KERN_ERR
+				"Could not reserve cable signal GPIO!\n");
+			return;
+		}
+		omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1);
+		if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+				palmz71_powercable, IRQF_SAMPLE_RANDOM,
+				"palmz71-cable", 0))
+			printk(KERN_ERR
+					"IRQ request for power cable failed!\n");
+		palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0);
+	}
+}
+
+static void __init
+omap_palmz71_init(void)
+{
+	palmz71_gpio_setup(1);
+	omap_mpu_wdt_mode(0);
+
+	omap_board_config = palmz71_config;
+	omap_board_config_size = ARRAY_SIZE(palmz71_config);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	spi_register_board_info(palmz71_boardinfo,
+				ARRAY_SIZE(palmz71_boardinfo));
+	omap_serial_init();
+	palmz71_gpio_setup(0);
+}
+
+static void __init
+omap_palmz71_map_io(void)
+{
+	omap1_map_common_io();
+}
+
+MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
+	.phys_io = 0xfff00000,
+	.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params = 0x10000100,.map_io = omap_palmz71_map_io,
+	.init_irq = omap_palmz71_init_irq,
+	.init_machine = omap_palmz71_init,
+	.timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
new file mode 100644
index 00000000000..2743d639aa0
--- /dev/null
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -0,0 +1,494 @@
+/*
+* linux/arch/arm/mach-omap1/board-sx1.c
+*
+* Modified from board-generic.c
+*
+* Support for the Siemens SX1 mobile phone.
+*
+* Original version : Vladimir Ananiev (Vovan888-at-gmail com)
+*
+* Maintainters : Vladimir Ananiev (aka Vovan888), Sergge
+*		oslik.ru
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/errno.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
+#include <asm/arch/keypad.h>
+
+/* Write to I2C device */
+int i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
+{
+	struct i2c_adapter *adap;
+	int err;
+	struct i2c_msg msg[1];
+	unsigned char data[2];
+
+	adap = i2c_get_adapter(0);
+	if (!adap)
+		return -ENODEV;
+	msg->addr = devaddr;	/* I2C address of chip */
+	msg->flags = 0;
+	msg->len = 2;
+	msg->buf = data;
+	data[0] = regoffset;	/* register num */
+	data[1] = value;		/* register data */
+	err = i2c_transfer(adap, msg, 1);
+	if (err >= 0)
+		return 0;
+	return err;
+}
+
+/* Read from I2C device */
+int i2c_read_byte(u8 devaddr, u8 regoffset, u8 * value)
+{
+	struct i2c_adapter *adap;
+	int err;
+	struct i2c_msg msg[1];
+	unsigned char data[2];
+
+	adap = i2c_get_adapter(0);
+	if (!adap)
+		return -ENODEV;
+
+	msg->addr = devaddr;	/* I2C address of chip */
+	msg->flags = 0;
+	msg->len = 1;
+	msg->buf = data;
+	data[0] = regoffset;	/* register num */
+	err = i2c_transfer(adap, msg, 1);
+
+	msg->addr = devaddr;	/* I2C address */
+	msg->flags = I2C_M_RD;
+	msg->len = 1;
+	msg->buf = data;
+	err = i2c_transfer(adap, msg, 1);
+	*value = data[0];
+
+	if (err >= 0)
+		return 0;
+	return err;
+}
+/* set keyboard backlight intensity */
+int sx1_setkeylight(u8 keylight)
+{
+	if (keylight > SOFIA_MAX_LIGHT_VAL)
+		keylight = SOFIA_MAX_LIGHT_VAL;
+	return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
+}
+/* get current keylight intensity */
+int sx1_getkeylight(u8 * keylight)
+{
+	return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
+}
+/* set LCD backlight intensity */
+int sx1_setbacklight(u8 backlight)
+{
+	if (backlight > SOFIA_MAX_LIGHT_VAL)
+		backlight = SOFIA_MAX_LIGHT_VAL;
+	return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight);
+}
+/* get current LCD backlight intensity */
+int sx1_getbacklight (u8 * backlight)
+{
+	return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight);
+}
+/* set LCD backlight power on/off */
+int sx1_setmmipower(u8 onoff)
+{
+	int err;
+	u8 dat = 0;
+	err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+	if (err < 0)
+		return err;
+	if (onoff)
+		dat |= SOFIA_MMILIGHT_POWER;
+	else
+		dat &= ~SOFIA_MMILIGHT_POWER;
+	return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+}
+/* set MMC power on/off */
+int sx1_setmmcpower(u8 onoff)
+{
+	int err;
+	u8 dat = 0;
+	err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+	if (err < 0)
+		return err;
+	if (onoff)
+		dat |= SOFIA_MMC_POWER;
+	else
+		dat &= ~SOFIA_MMC_POWER;
+	return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+}
+/* set USB power on/off */
+int sx1_setusbpower(u8 onoff)
+{
+	int err;
+	u8 dat = 0;
+	err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+	if (err < 0)
+		return err;
+	if (onoff)
+		dat |= SOFIA_USB_POWER;
+	else
+		dat &= ~SOFIA_USB_POWER;
+	return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+}
+
+EXPORT_SYMBOL(sx1_setkeylight);
+EXPORT_SYMBOL(sx1_getkeylight);
+EXPORT_SYMBOL(sx1_setbacklight);
+EXPORT_SYMBOL(sx1_getbacklight);
+EXPORT_SYMBOL(sx1_setmmipower);
+EXPORT_SYMBOL(sx1_setmmcpower);
+EXPORT_SYMBOL(sx1_setusbpower);
+
+/*----------- Keypad -------------------------*/
+
+static int sx1_keymap[] = {
+	KEY(5, 3, GROUP_0 | 117), /* camera Qt::Key_F17 */
+	KEY(0, 4, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
+	KEY(1, 4, GROUP_2 | 114), /* voice memo */
+	KEY(2, 4, GROUP_3 | 114), /* voice memo */
+	KEY(0, 0, GROUP_1 | KEY_F12),	/* red button Qt::Key_Hangup */
+	KEY(4, 3, GROUP_1 | KEY_LEFT),
+	KEY(2, 3, GROUP_1 | KEY_DOWN),
+	KEY(1, 3, GROUP_1 | KEY_RIGHT),
+	KEY(0, 3, GROUP_1 | KEY_UP),
+	KEY(3, 3, GROUP_1 | KEY_POWER), /* joystick press or Qt::Key_Select */
+	KEY(5, 0, GROUP_1 | KEY_1),
+	KEY(4, 0, GROUP_1 | KEY_2),
+	KEY(3, 0, GROUP_1 | KEY_3),
+	KEY(3, 4, GROUP_1 | KEY_4),
+	KEY(4, 4, GROUP_1 | KEY_5),
+	KEY(5, 4, GROUP_1 | KEY_KPASTERISK),/* "*" */
+	KEY(4, 1, GROUP_1 | KEY_6),
+	KEY(5, 1, GROUP_1 | KEY_7),
+	KEY(3, 1, GROUP_1 | KEY_8),
+	KEY(3, 2, GROUP_1 | KEY_9),
+	KEY(5, 2, GROUP_1 | KEY_0),
+	KEY(4, 2, GROUP_1 | 113),	/* # F13 Toggle input method Qt::Key_F13 */
+	KEY(0, 1, GROUP_1 | KEY_F11),	/* green button Qt::Key_Call */
+	KEY(1, 2, GROUP_1 | KEY_YEN),	/* left soft Qt::Key_Context1 */
+	KEY(2, 2, GROUP_1 | KEY_F8),	/* right soft Qt::Key_Back */
+	KEY(2, 1, GROUP_1 | KEY_LEFTSHIFT), /* shift */
+	KEY(1, 1, GROUP_1 | KEY_BACKSPACE), /* C (clear) */
+	KEY(0, 2, GROUP_1 | KEY_F7),	/* menu Qt::Key_Menu */
+	0
+};
+
+static struct resource sx1_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_kp_platform_data sx1_kp_data = {
+	.rows		= 6,
+	.cols		= 6,
+	.keymap	= sx1_keymap,
+	.keymapsize = ARRAY_SIZE(sx1_keymap),
+	.delay	= 80,
+};
+
+static struct platform_device sx1_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &sx1_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(sx1_kp_resources),
+	.resource	= sx1_kp_resources,
+};
+
+/*----------- IRDA -------------------------*/
+
+static struct omap_irda_config sx1_irda_data = {
+	.transceiver_cap	= IR_SIRMODE,
+	.rx_channel		= OMAP_DMA_UART3_RX,
+	.tx_channel		= OMAP_DMA_UART3_TX,
+	.dest_start		= UART3_THR,
+	.src_start		= UART3_RHR,
+	.tx_trigger		= 0,
+	.rx_trigger		= 0,
+};
+
+static struct resource sx1_irda_resources[] = {
+	[0] = {
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 irda_dmamask = 0xffffffff;
+
+static struct platform_device sx1_irda_device = {
+	.name		= "omapirda",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &sx1_irda_data,
+		.dma_mask	= &irda_dmamask,
+	},
+	.num_resources	= ARRAY_SIZE(sx1_irda_resources),
+	.resource	= sx1_irda_resources,
+};
+
+/*----------- McBSP & Sound -------------------------*/
+
+/* Playback interface - McBSP1 */
+static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
+	.spcr2	= XINTM(3),	/* SPCR2=30 */
+	.spcr1	= RINTM(3),	/* SPCR1=30 */
+	.rcr2	= 0,	/* RCR2 =00 */
+	.rcr1	= RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16),	/* RCR1=140 */
+	.xcr2	= 0,	/* XCR2 = 0 */
+	.xcr1	= XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16),	/* XCR1 = 140 */
+	.srgr1	= FWID(15) | CLKGDV(12),	/* SRGR1=0f0c */
+	.srgr2	= FSGM | FPER(31),	/* SRGR2=101f */
+	.pcr0	= FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
+						/* PCR0 =0f0f */
+};
+
+/* TODO: PCM interface - McBSP2 */
+static struct omap_mcbsp_reg_cfg mcbsp2_regs = {
+	.spcr2	= FRST | GRST | XRST | XINTM(3),	/* SPCR2=F1 */
+	.spcr1	= RINTM(3) | RRST,	/* SPCR1=30 */
+	.rcr2	= 0,	/* RCR2 =00 */
+	.rcr1	= RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1 = 140 */
+	.xcr2	= 0,	/* XCR2 = 0 */
+	.xcr1	= XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */
+	.srgr1	= FWID(15) | CLKGDV(12),	/* SRGR1=0f0c */
+	.srgr2	= FSGM | FPER(31),	/* SRGR2=101f */
+	.pcr0	= FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
+						/* PCR0=0f0f */
+	/* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config sx1_alsa_config = {
+	.name			= "SX1 EGold",
+	.mcbsp_regs_alsa	= &mcbsp1_regs,
+};
+
+static struct platform_device sx1_mcbsp1_device = {
+	.name	= "omap_alsa_mcbsp",
+	.id	= 1,
+	.dev = {
+		.platform_data	= &sx1_alsa_config,
+	},
+};
+
+/*----------- MTD -------------------------*/
+
+static struct mtd_partition sx1_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+		.name		= "bootloader",
+		.offset		= 0x01800000,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= 0,
+	},
+	/* kernel */
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M - 2 * SZ_128K,
+		.mask_flags	= 0
+	},
+	/* file system */
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct flash_platform_data sx1_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= sx1_partitions,
+	.nr_parts	= ARRAY_SIZE(sx1_partitions),
+};
+
+#ifdef CONFIG_SX1_OLD_FLASH
+/* MTD Intel StrataFlash - old flashes */
+static struct resource sx1_old_flash_resource[] = {
+	[0] = {
+		.start	= OMAP_CS0_PHYS,	/* Physical */
+		.end	= OMAP_CS0_PHYS + SZ_16M - 1,,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= OMAP_CS1_PHYS,
+		.end	= OMAP_CS1_PHYS + SZ_8M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sx1_flash_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &sx1_flash_data,
+	},
+	.num_resources	= 2,
+	.resource	= &sx1_old_flash_resource,
+};
+#else
+/* MTD Intel 4000 flash - new flashes */
+static struct resource sx1_new_flash_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device sx1_flash_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &sx1_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &sx1_new_flash_resource,
+};
+#endif
+
+/*----------- USB -------------------------*/
+
+static struct omap_usb_config sx1_usb_config __initdata = {
+	.otg		= 0,
+	.register_dev	= 1,
+	.register_host	= 0,
+	.hmc_mode	= 0,
+	.pins[0]	= 2,
+	.pins[1]	= 0,
+	.pins[2]	= 0,
+};
+
+/*----------- MMC -------------------------*/
+
+static struct omap_mmc_config sx1_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled 	= 1,
+		.wire4		= 0,
+		.wp_pin		= -1,
+		.power_pin	= -1, /* power is in Sofia */
+		.switch_pin	= OMAP_MPUIO(3),
+	},
+};
+
+/*----------- LCD -------------------------*/
+
+static struct platform_device sx1_lcd_device = {
+	.name		= "lcd_sx1",
+	.id		= -1,
+};
+
+static struct omap_lcd_config sx1_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+/*-----------------------------------------*/
+static struct platform_device *sx1_devices[] __initdata = {
+	&sx1_flash_device,
+	&sx1_kp_device,
+	&sx1_lcd_device,
+	&sx1_mcbsp1_device,
+	&sx1_irda_device,
+};
+/*-----------------------------------------*/
+
+static struct omap_uart_config sx1_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel sx1_config[] = {
+	{ OMAP_TAG_USB,	&sx1_usb_config },
+	{ OMAP_TAG_MMC,	&sx1_mmc_config },
+	{ OMAP_TAG_LCD,	&sx1_lcd_config },
+	{ OMAP_TAG_UART,	&sx1_uart_config },
+};
+/*-----------------------------------------*/
+static void __init omap_sx1_init(void)
+{
+	platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
+
+	omap_board_config = sx1_config;
+	omap_board_config_size = ARRAY_SIZE(sx1_config);
+	omap_serial_init();
+
+	/* turn on USB power */
+	/* sx1_setusbpower(1); cant do it here because i2c is not ready */
+	omap_request_gpio(1);	/* A_IRDA_OFF */
+	omap_request_gpio(11);	/* A_SWITCH */
+	omap_request_gpio(15);	/* A_USB_ON */
+	omap_set_gpio_direction(1, 0);/* gpio1 -> output */
+	omap_set_gpio_direction(11, 0);/* gpio11 -> output */
+	omap_set_gpio_direction(15, 0);/* gpio15 -> output */
+	/* set GPIO data */
+	omap_set_gpio_dataout(1, 1);/*A_IRDA_OFF = 1 */
+	omap_set_gpio_dataout(11, 0);/*A_SWITCH = 0 */
+	omap_set_gpio_dataout(15, 0);/*A_USB_ON = 0 */
+
+}
+/*----------------------------------------*/
+static void __init omap_sx1_init_irq(void)
+{
+	omap1_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+}
+/*----------------------------------------*/
+
+static void __init omap_sx1_map_io(void)
+{
+	omap1_map_common_io();
+}
+
+MACHINE_START(SX1, "OMAP310 based Siemens SX1")
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_sx1_map_io,
+	.init_irq		= omap_sx1_init_irq,
+	.init_machine	= omap_sx1_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 447a586eb33..214dd19889a 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -235,7 +235,7 @@ static struct notifier_block panic_block = {
 static int __init voiceblue_setup(void)
 {
 	/* Setup panic notifier */
-	notifier_chain_register(&panic_notifier_list, &panic_block);
+	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index f625f6dd228..5d9faa68d2e 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -49,6 +49,15 @@ static void omap1_uart_recalc(struct clk * clk)
 		clk->rate = 12000000;
 }
 
+static void omap1_sossi_recalc(struct clk *clk)
+{
+	u32 div = omap_readl(MOD_CONF_CTRL_1);
+
+	div = (div >> 17) & 0x7;
+	div++;
+	clk->rate = clk->parent->rate / div;
+}
+
 static int omap1_clk_enable_dsp_domain(struct clk *clk)
 {
 	int retval;
@@ -396,6 +405,31 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
 	return 0;
 }
 
+static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
+{
+	u32 l;
+	int div;
+	unsigned long p_rate;
+
+	p_rate = clk->parent->rate;
+	/* Round towards slower frequency */
+	div = (p_rate + rate - 1) / rate;
+	div--;
+	if (div < 0 || div > 7)
+		return -EINVAL;
+
+	l = omap_readl(MOD_CONF_CTRL_1);
+	l &= ~(7 << 17);
+	l |= div << 17;
+	omap_writel(l, MOD_CONF_CTRL_1);
+
+	clk->rate = p_rate / (div + 1);
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+
+	return 0;
+}
+
 static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
 {
 	return 96000000 / calc_ext_dsor(rate);
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index f7df00205c4..6eadf72828d 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -17,6 +17,8 @@ static int omap1_clk_enable_generic(struct clk * clk);
 static void omap1_clk_disable_generic(struct clk * clk);
 static void omap1_ckctl_recalc(struct clk * clk);
 static void omap1_watchdog_recalc(struct clk * clk);
+static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
+static void omap1_sossi_recalc(struct clk *clk);
 static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
 static int omap1_clk_enable_dsp_domain(struct clk * clk);
 static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
@@ -168,9 +170,10 @@ static struct clk ck_dpll1 = {
 
 static struct arm_idlect1_clk ck_dpll1out = {
 	.clk = {
-	       	.name		= "ck_dpll1out",
+		.name		= "ck_dpll1out",
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL |
+				  ENABLE_REG_32BIT | RATE_PROPAGATES,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_CKOUT_ARM,
 		.recalc		= &followparent_recalc,
@@ -180,6 +183,19 @@ static struct arm_idlect1_clk ck_dpll1out = {
 	.idlect_shift	= 12,
 };
 
+static struct clk sossi_ck = {
+	.name		= "ck_sossi",
+	.parent		= &ck_dpll1out.clk,
+	.flags		= CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
+			  ENABLE_REG_32BIT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_1,
+	.enable_bit	= 16,
+	.recalc		= &omap1_sossi_recalc,
+	.set_rate	= &omap1_set_sossi_rate,
+	.enable		= &omap1_clk_enable_generic,
+	.disable	= &omap1_clk_disable_generic,
+};
+
 static struct clk arm_ck = {
 	.name		= "arm_ck",
 	.parent		= &ck_dpll1,
@@ -282,7 +298,7 @@ static struct clk arminth_ck16xx = {
 static struct clk dsp_ck = {
 	.name		= "dsp_ck",
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL,
 	.enable_reg	= (void __iomem *)ARM_CKCTL,
 	.enable_bit	= EN_DSPCK,
@@ -295,7 +311,7 @@ static struct clk dsp_ck = {
 static struct clk dspmmu_ck = {
 	.name		= "dspmmu_ck",
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL | ALWAYS_ENABLED,
 	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
@@ -306,7 +322,7 @@ static struct clk dspmmu_ck = {
 static struct clk dspper_ck = {
 	.name		= "dspper_ck",
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL | VIRTUAL_IO_ADDRESS,
 	.enable_reg	= (void __iomem *)DSP_IDLECT2,
 	.enable_bit	= EN_PERCK,
@@ -320,7 +336,7 @@ static struct clk dspper_ck = {
 static struct clk dspxor_ck = {
 	.name		= "dspxor_ck",
 	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_IO_ADDRESS,
 	.enable_reg	= (void __iomem *)DSP_IDLECT2,
 	.enable_bit	= EN_XORPCK,
@@ -332,7 +348,7 @@ static struct clk dspxor_ck = {
 static struct clk dsptim_ck = {
 	.name		= "dsptim_ck",
 	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_IO_ADDRESS,
 	.enable_reg	= (void __iomem *)DSP_IDLECT2,
 	.enable_bit	= EN_DSPTIMCK,
@@ -374,7 +390,7 @@ static struct clk arminth_ck1510 = {
 
 static struct clk tipb_ck = {
 	/* No-idle controlled by "tc_ck" */
-	.name		= "tibp_ck",
+	.name		= "tipb_ck",
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
 			  ALWAYS_ENABLED,
@@ -733,7 +749,7 @@ remains active during MPU idle whenever this is enabled */
 static struct clk i2c_fck = {
 	.name		= "i2c_fck",
 	.id		= 1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
 			  ALWAYS_ENABLED,
 	.parent		= &armxor_ck.clk,
@@ -760,6 +776,7 @@ static struct clk * onchip_clks[] = {
 	&ck_dpll1,
 	/* CK_GEN1 clocks */
 	&ck_dpll1out.clk,
+	&sossi_ck,
 	&arm_ck,
 	&armper_ck.clk,
 	&arm_gpio_ck,
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
index a0cd001ac39..e7835d6f53a 100644
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ b/arch/arm/mach-omap1/leds-innovator.c
@@ -95,8 +95,5 @@ void innovator_leds_event(led_event_t evt)
 		break;
 	}
 
-	if (led_state & LED_STATE_ENABLED)
-		;
-
 	local_irq_restore(flags);
 }
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 5432335bc49..52c70e5fcf6 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -283,6 +283,30 @@ MUX_CFG("R11_1610_CF_IOIS16",	 B,    0,    3,	  2,   16,   1,	  2,	 1,  1)
 MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
 MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
 MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
+
+/* parallel camera */
+MUX_CFG("J15_1610_CAM_LCLK",	 4,   24,    0,   0,  18,   1,    0,     0,  0)
+MUX_CFG("J18_1610_CAM_D7",	 4,   27,    0,   0,  19,   1,    0,     0,  0)
+MUX_CFG("J19_1610_CAM_D6",	 5,    0,    0,   0,  20,   1,    0,     0,  0)
+MUX_CFG("J14_1610_CAM_D5",	 5,    3,    0,   0,  21,   1,    0,     0,  0)
+MUX_CFG("K18_1610_CAM_D4",	 5,    6,    0,   0,  22,   1,    0,     0,  0)
+MUX_CFG("K19_1610_CAM_D3",	 5,    9,    0,   0,  23,   1,    0,     0,  0)
+MUX_CFG("K15_1610_CAM_D2",	 5,   12,    0,   0,  24,   1,    0,     0,  0)
+MUX_CFG("K14_1610_CAM_D1",	 5,   15,    0,   0,  25,   1,    0,     0,  0)
+MUX_CFG("L19_1610_CAM_D0",	 5,   18,    0,   0,  26,   1,    0,     0,  0)
+MUX_CFG("L18_1610_CAM_VS",	 5,   21,    0,   0,  27,   1,    0,     0,  0)
+MUX_CFG("L15_1610_CAM_HS",	 5,   24,    0,   0,  28,   1,    0,     0,  0)
+MUX_CFG("M19_1610_CAM_RSTZ",	 5,   27,    0,   0,  29,   0,    0,     0,  0)
+MUX_CFG("Y15_1610_CAM_OUTCLK",	 A,    0,    6,   2,   6,   0,    2,     0,  0)
+
+/* serial camera */
+MUX_CFG("H19_1610_CAM_EXCLK",	 4,   21,    0,   0,  17,   0,    0,     0,  0)
+	/* REVISIT 5912 spec sez CCP_* can't pullup or pulldown ... ? */
+MUX_CFG("Y12_1610_CCP_CLKP",	 8,   18,    6,   1,  24,   1,    1,     0,  0)
+MUX_CFG("W13_1610_CCP_CLKM",	 9,    0,    6,   1,  28,   1,    1,     0,  0)
+MUX_CFG("W14_1610_CCP_DATAP",	 9,   24,    6,   2,   4,   1,    2,     0,  0)
+MUX_CFG("Y14_1610_CCP_DATAM",	 9,   21,    6,   2,   3,   1,    2,     0,  0)
+
 };
 #endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
 
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 2e68be60729..089b8208de0 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -153,11 +153,8 @@ void omap_pm_idle(void)
 	use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1);
 #endif
 
-	if (omap_dma_running()) {
+	if (omap_dma_running())
 		use_idlect1 &= ~(1 << 6);
-		if (omap_lcd_dma_ext_running())
-			use_idlect1 &= ~(1 << 12);
-	}
 
 	/* We should be able to remove the do_sleep variable and multiple
 	 * tests above as soon as drivers, timer and DMA code have been fixed.