Merge branch 'omap2-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into omap-all

19 files changed, 220 insertions, 22 deletions

diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
index cf1dc022394..10d449ea7ed 100644
--- a/arch/arm/plat-omap/include/mach/board-2430sdp.h
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -30,10 +30,12 @@
 #define __ASM_ARCH_OMAP_2430SDP_H
 
 /* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START		 0x08000300
+#define OMAP24XX_ETHR_START		0x08000300
 #define OMAP24XX_ETHR_GPIO_IRQ		149
 #define SDP2430_CS0_BASE		0x04000000
 
-#define TWL4030_IRQNUM			INT_24XX_SYS_NIRQ
+/* Function prototypes */
+extern void sdp2430_flash_init(void);
+extern void sdp2430_usb_init(void);
 
 #endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index d6f2a8e963d..731c858cf3f 100644
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -31,6 +31,12 @@
 
 extern void apollon_mmc_init(void);
 
+static inline int apollon_plus(void)
+{
+	/* The apollon plus has IDCODE revision 5 */
+	return system_rev & 0xc0;
+}
+
 /* Placeholder for APOLLON specific defines */
 #define APOLLON_ETHR_GPIO_IRQ		74
 
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
index 1470cd3e519..7c3fa0f0a65 100644
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/plat-omap/include/mach/board-h4.h
  *
- * Hardware definitions for TI OMAP1610 H4 board.
+ * Hardware definitions for TI OMAP2420 H4 board.
  *
  * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
  *
@@ -29,6 +29,9 @@
 #ifndef __ASM_ARCH_OMAP_H4_H
 #define __ASM_ARCH_OMAP_H4_H
 
+/* MMC Prototypes */
+extern void h4_mmc_init(void);
+
 /* Placeholder for H4 specific defines */
 #define OMAP24XX_ETHR_GPIO_IRQ		92
 #endif /*  __ASM_ARCH_OMAP_H4_H */
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 54445642f35..c23c12ccb35 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -45,6 +45,8 @@ struct omap_mmc_conf {
 	unsigned cover:1;
 	/* 4 wire signaling is optional, and is only used for SD/SDIO */
 	unsigned wire4:1;
+	/* use the internal clock */
+	unsigned internal_clock:1;
 	s16 power_pin;
 	s16 switch_pin;
 	s16 wp_pin;
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 06093112b66..ef70e2b0f05 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -34,6 +34,7 @@ struct sys_timer;
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 extern void omap_serial_init(void);
+extern void omap_serial_enable_clocks(int enable);
 #ifdef CONFIG_I2C_OMAP
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
@@ -49,6 +50,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
 
 /* IO bases for various OMAP processors */
 struct omap_globals {
+	u32		class;		/* OMAP class to detect */
 	void __iomem	*tap;		/* Control module ID code */
 	void __iomem	*sdrc;		/* SDRAM Controller */
 	void __iomem	*sms;		/* SDRAM Memory Scheduler */
@@ -62,6 +64,7 @@ void omap2_set_globals_243x(void);
 void omap2_set_globals_343x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
 void omap2_set_globals_memory(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index ee378d254cb..dc988676057 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,13 +1,10 @@
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
 /*
  * arch/arm/plat-omap/include/mach/control.h
  *
  * OMAP2/3 System Control Module definitions
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -16,14 +13,23 @@
  * the Free Software Foundation.
  */
 
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
 #include <mach/io.h>
 
+#ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
 	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)					\
 	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
 	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
 
 /*
  * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
@@ -134,6 +140,7 @@
 #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
 #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
 
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 05aee0eda34..e0464187209 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -346,9 +346,14 @@ IS_OMAP_TYPE(3430, 0x3430)
 		get_sil_revision(system_rev)
 
 /* Various silicon macros defined here */
+#define OMAP242X_CLASS		0x24200000
 #define OMAP2420_REV_ES1_0	0x24200000
 #define OMAP2420_REV_ES2_0	0x24201000
+
+#define OMAP243X_CLASS		0x24300000
 #define OMAP2430_REV_ES1_0	0x24300000
+
+#define OMAP343X_CLASS		0x34300000
 #define OMAP3430_REV_ES1_0	0x34300000
 #define OMAP3430_REV_ES2_0	0x34301000
 #define OMAP3430_REV_ES2_1	0x34302000
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 4cb818da672..5bb7460cabc 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -76,6 +76,8 @@ extern void omap_free_gpio(int gpio);
 extern void omap_set_gpio_direction(int gpio, int is_input);
 extern void omap_set_gpio_dataout(int gpio, int enable);
 extern int omap_get_gpio_datain(int gpio);
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
 
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 6a8e07ffc2d..3c7b425c585 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -11,6 +11,9 @@
 #ifndef __OMAP2_GPMC_H
 #define __OMAP2_GPMC_H
 
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM		8
+
 #define GPMC_CS_CONFIG1		0x00
 #define GPMC_CS_CONFIG2		0x04
 #define GPMC_CS_CONFIG3		0x08
@@ -22,6 +25,9 @@
 #define GPMC_CS_NAND_ADDRESS	0x20
 #define GPMC_CS_NAND_DATA	0x24
 
+#define GPMC_CONFIG		0x50
+#define GPMC_STATUS		0x54
+
 #define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
 #define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
 #define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
@@ -81,6 +87,7 @@ struct gpmc_timings {
 };
 
 extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
 extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
 extern unsigned long gpmc_get_fclk_period(void);
 
@@ -92,5 +99,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
+extern void gpmc_init(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index abb01e471c4..29c849f5f18 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -282,8 +282,8 @@
 
 #include "omap730.h"
 #include "omap1510.h"
-#include "omap24xx.h"
 #include "omap16xx.h"
+#include "omap24xx.h"
 #include "omap34xx.h"
 
 #ifndef __ASSEMBLER__
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 17248bbf3f2..e9fd63055cb 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -125,6 +125,7 @@
 #define INT_UART2		(15 + IH2_BASE)
 #define INT_BT_MCSI1TX		(16 + IH2_BASE)
 #define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_SOSSI_MATCH		(19 + IH2_BASE)
 #define INT_USB_W2FC		(20 + IH2_BASE)
 #define INT_1WIRE		(21 + IH2_BASE)
 #define INT_OS_TIMER		(22 + IH2_BASE)
@@ -176,6 +177,7 @@
 #define INT_1610_DMA_CH14	(61 + IH2_BASE)
 #define INT_1610_DMA_CH15	(62 + IH2_BASE)
 #define INT_1610_NAND		(63 + IH2_BASE)
+#define INT_1610_SHA1MD5	(91 + IH2_BASE)
 
 /*
  * OMAP-730 specific IRQ numbers for interrupt handler 2
@@ -263,12 +265,16 @@
 #define INT_24XX_GPTIMER10	46
 #define INT_24XX_GPTIMER11	47
 #define INT_24XX_GPTIMER12	48
+#define INT_24XX_SHA1MD5	51
 #define INT_24XX_I2C1_IRQ	56
 #define INT_24XX_I2C2_IRQ	57
+#define INT_24XX_HDQ_IRQ	58
 #define INT_24XX_MCBSP1_IRQ_TX	59
 #define INT_24XX_MCBSP1_IRQ_RX	60
 #define INT_24XX_MCBSP2_IRQ_TX	62
 #define INT_24XX_MCBSP2_IRQ_RX	63
+#define INT_24XX_SPI1_IRQ	65
+#define INT_24XX_SPI2_IRQ	66
 #define INT_24XX_UART1_IRQ	72
 #define INT_24XX_UART2_IRQ	73
 #define INT_24XX_UART3_IRQ	74
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 614b2c1327c..5670d563f37 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -125,20 +125,64 @@
 	.pu_pd_val	= pull_mode,				\
 },
 
-
-#define PULL_DISABLED	0
-#define PULL_ENABLED	1
-
-#define PULL_DOWN	0
-#define PULL_UP		1
+/* 24xx/34xx mux bit defines */
+#define OMAP2_PULL_ENA		(1 << 3)
+#define OMAP2_PULL_UP		(1 << 4)
+#define OMAP2_ALTELECTRICALSEL	(1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP3_INPUT_EN		(1 << 8)
+#define OMAP3_OFF_EN		(1 << 9)
+#define OMAP3_OFFOUT_EN		(1 << 10)
+#define OMAP3_OFFOUT_VAL	(1 << 11)
+#define OMAP3_OFF_PULL_EN	(1 << 12)
+#define OMAP3_OFF_PULL_UP	(1 << 13)
+#define OMAP3_WAKEUP_EN		(1 << 14)
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define	OMAP34XX_MUX_MODE0	0
+#define	OMAP34XX_MUX_MODE1	1
+#define	OMAP34XX_MUX_MODE2	2
+#define	OMAP34XX_MUX_MODE3	3
+#define	OMAP34XX_MUX_MODE4	4
+#define	OMAP34XX_MUX_MODE5	5
+#define	OMAP34XX_MUX_MODE6	6
+#define	OMAP34XX_MUX_MODE7	7
+
+/* 34xx active pin states */
+#define OMAP34XX_PIN_OUTPUT		0
+#define OMAP34XX_PIN_INPUT		OMAP3_INPUT_EN
+#define OMAP34XX_PIN_INPUT_PULLUP	(OMAP2_PULL_ENA | OMAP3_INPUT_EN \
+						| OMAP2_PULL_UP)
+#define OMAP34XX_PIN_INPUT_PULLDOWN	(OMAP2_PULL_ENA | OMAP3_INPUT_EN)
+
+/* 34xx off mode states */
+#define OMAP34XX_PIN_OFF_NONE           0
+#define OMAP34XX_PIN_OFF_OUTPUT_HIGH	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
+						| OMAP3_OFFOUT_VAL)
+#define OMAP34XX_PIN_OFF_OUTPUT_LOW	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
+#define OMAP34XX_PIN_OFF_INPUT_PULLUP	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
+						| OMAP3_OFF_PULL_UP)
+#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
+#define OMAP34XX_PIN_OFF_WAKEUPENABLE	OMAP3_WAKEUP_EN
+
+#define MUX_CFG_34XX(desc, reg_offset, mux_value) {		\
+	.name		= desc,					\
+	.debug		= 0,					\
+	.mux_reg	= reg_offset,				\
+	.mux_val	= mux_value				\
+},
 
 struct pin_config {
-	char *name;
-	unsigned char busy;
-	unsigned char debug;
+	char 			*name;
+	const unsigned int 	mux_reg;
+	unsigned char		debug;
 
-	const char *mux_reg_name;
-	const unsigned int mux_reg;
+#if	defined(CONFIG_ARCH_OMAP34XX)
+	u16			mux_val; /* Wake-up, off mode, pull, mux mode */
+#endif
+
+#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
 	const unsigned char mask_offset;
 	const unsigned char mask;
 
@@ -150,6 +194,12 @@ struct pin_config {
 	const char *pu_pd_name;
 	const unsigned int pu_pd_reg;
 	const unsigned char pu_pd_val;
+#endif
+
+#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+	const char *mux_reg_name;
+#endif
+
 };
 
 enum omap730_index {
@@ -593,6 +643,90 @@ enum omap24xx_index {
 
 };
 
+enum omap34xx_index {
+	/* 34xx I2C */
+	K21_34XX_I2C1_SCL,
+	J21_34XX_I2C1_SDA,
+	AF15_34XX_I2C2_SCL,
+	AE15_34XX_I2C2_SDA,
+	AF14_34XX_I2C3_SCL,
+	AG14_34XX_I2C3_SDA,
+	AD26_34XX_I2C4_SCL,
+	AE26_34XX_I2C4_SDA,
+
+	/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+	Y8_3430_USB1HS_PHY_CLK,
+	Y9_3430_USB1HS_PHY_STP,
+	AA14_3430_USB1HS_PHY_DIR,
+	AA11_3430_USB1HS_PHY_NXT,
+	W13_3430_USB1HS_PHY_DATA0,
+	W12_3430_USB1HS_PHY_DATA1,
+	W11_3430_USB1HS_PHY_DATA2,
+	Y11_3430_USB1HS_PHY_DATA3,
+	W9_3430_USB1HS_PHY_DATA4,
+	Y12_3430_USB1HS_PHY_DATA5,
+	W8_3430_USB1HS_PHY_DATA6,
+	Y13_3430_USB1HS_PHY_DATA7,
+
+	/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
+	AA8_3430_USB2HS_PHY_CLK,
+	AA10_3430_USB2HS_PHY_STP,
+	AA9_3430_USB2HS_PHY_DIR,
+	AB11_3430_USB2HS_PHY_NXT,
+	AB10_3430_USB2HS_PHY_DATA0,
+	AB9_3430_USB2HS_PHY_DATA1,
+	W3_3430_USB2HS_PHY_DATA2,
+	T4_3430_USB2HS_PHY_DATA3,
+	T3_3430_USB2HS_PHY_DATA4,
+	R3_3430_USB2HS_PHY_DATA5,
+	R4_3430_USB2HS_PHY_DATA6,
+	T2_3430_USB2HS_PHY_DATA7,
+
+
+	/* TLL - HSUSB: 12-pin TLL Port 1*/
+	Y8_3430_USB1HS_TLL_CLK,
+	Y9_3430_USB1HS_TLL_STP,
+	AA14_3430_USB1HS_TLL_DIR,
+	AA11_3430_USB1HS_TLL_NXT,
+	W13_3430_USB1HS_TLL_DATA0,
+	W12_3430_USB1HS_TLL_DATA1,
+	W11_3430_USB1HS_TLL_DATA2,
+	Y11_3430_USB1HS_TLL_DATA3,
+	W9_3430_USB1HS_TLL_DATA4,
+	Y12_3430_USB1HS_TLL_DATA5,
+	W8_3430_USB1HS_TLL_DATA6,
+	Y13_3430_USB1HS_TLL_DATA7,
+
+	/* TLL - HSUSB: 12-pin TLL Port 2*/
+	AA8_3430_USB2HS_TLL_CLK,
+	AA10_3430_USB2HS_TLL_STP,
+	AA9_3430_USB2HS_TLL_DIR,
+	AB11_3430_USB2HS_TLL_NXT,
+	AB10_3430_USB2HS_TLL_DATA0,
+	AB9_3430_USB2HS_TLL_DATA1,
+	W3_3430_USB2HS_TLL_DATA2,
+	T4_3430_USB2HS_TLL_DATA3,
+	T3_3430_USB2HS_TLL_DATA4,
+	R3_3430_USB2HS_TLL_DATA5,
+	R4_3430_USB2HS_TLL_DATA6,
+	T2_3430_USB2HS_TLL_DATA7,
+
+	/* TLL - HSUSB: 12-pin TLL Port 3*/
+	AA6_3430_USB3HS_TLL_CLK,
+	AB3_3430_USB3HS_TLL_STP,
+	AA3_3430_USB3HS_TLL_DIR,
+	Y3_3430_USB3HS_TLL_NXT,
+	AA5_3430_USB3HS_TLL_DATA0,
+	Y4_3430_USB3HS_TLL_DATA1,
+	Y5_3430_USB3HS_TLL_DATA2,
+	W5_3430_USB3HS_TLL_DATA3,
+	AB12_3430_USB3HS_TLL_DATA4,
+	AB13_3430_USB3HS_TLL_DATA5,
+	AA13_3430_USB3HS_TLL_DATA6,
+	AA12_3430_USB3HS_TLL_DATA7
+
+};
+
 struct omap_mux_cfg {
 	struct pin_config	*pins;
 	unsigned long		size;
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
index 505a38af8b2..d2400466813 100644
--- a/arch/arm/plat-omap/include/mach/omap1510.h
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -44,5 +44,7 @@
 #define OMAP1510_DSPREG_SIZE	SZ_128K
 #define OMAP1510_DSPREG_START	0xE1000000
 
+#define OMAP1510_DSP_MMU_BASE	(0xfffed200)
+
 #endif /*  __ASM_ARCH_OMAP15XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index c6c93afb278..0e69b504c25 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -44,6 +44,11 @@
 #define OMAP16XX_DSPREG_SIZE	SZ_128K
 #define OMAP16XX_DSPREG_START	0xE1000000
 
+#define OMAP16XX_SEC_BASE	0xFFFE4000
+#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)
+
 /*
  * ---------------------------------------------------------------------------
  * Interrupts
@@ -190,7 +195,7 @@
 #define WSPR_DISABLE_0         (0x0000aaaa)
 #define WSPR_DISABLE_1         (0x00005555)
 
-/* Mailbox */
+#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
 #define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
 
 #endif /*  __ASM_ARCH_OMAP16XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index bb8319d66e9..556f0eb4d55 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -48,6 +48,7 @@
 #define OMAP2420_PRM_BASE	OMAP2420_CM_BASE
 #define OMAP2420_SDRC_BASE	(L3_24XX_BASE + 0x9000)
 #define OMAP2420_SMS_BASE	0x68008000
+#define OMAP2420_GPMC_BASE	0x6800a000
 
 #define OMAP2430_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
 #define OMAP2430_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index cae037d1307..ec67fb42860 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -62,6 +62,7 @@
 #define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
 #define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
 #define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
 #define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
 
 /* Values from DSP must map to lower 16-bits */
@@ -305,6 +306,7 @@ struct lcd_ctrl {
 					   int screen_width,
 					   int pos_x, int pos_y, int width,
 					   int height, int color_mode);
+	int		(*set_rotate)	  (int angle);
 	int		(*setup_mem)	  (int plane, size_t size,
 					   int mem_type, unsigned long *paddr);
 	int		(*mmap)		  (struct fb_info *info,
@@ -374,6 +376,7 @@ extern struct lcd_ctrl omap1_lcd_ctrl;
 extern struct lcd_ctrl omap2_disp_ctrl;
 #endif
 
+extern void omapfb_reserve_sdram(void);
 extern void omapfb_register_panel(struct lcd_panel *panel);
 extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
 extern void omapfb_notify_clients(struct omapfb_device *fbdev,
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index 6063e9681de..768eb6e7abc 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -135,7 +135,8 @@ extern void omap_pm_suspend(void);
 extern void omap730_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+					void __iomem *sdrc_power);
 extern void omap730_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index d908eb527c8..25ee3819faa 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,6 +25,8 @@
 #define SDRC_DLLB_STATUS	0x06C
 #define SDRC_POWER		0x070
 #define SDRC_MR_0		0x084
+#define SDRC_ACTIM_CTRL_A	0x09c
+#define SDRC_ACTIM_CTRL_B	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 515b89bee96..8a676a04be4 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -20,11 +20,17 @@
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x4806e000
+#elif defined(CONFIG_ARCH_OMAP3)
+/* OMAP3 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x49020000
 #endif
 
 #define OMAP_MAX_NR_PORTS	3
 #define OMAP1510_BASE_BAUD	(12000000/16)
 #define OMAP16XX_BASE_BAUD	(48000000/16)
+#define OMAP24XX_BASE_BAUD	(48000000/16)
 
 #define is_omap_port(pt)	({int __ret = 0;			\
 			if ((pt)->port.mapbase == OMAP_UART1_BASE ||	\