aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorDavid Brownell <david-b@pacbell.net>2008-02-28 22:09:15 -0800
committerTony Lindgren <tony@atomide.com>2008-04-14 09:57:06 -0700
commitd94577d5a581fe55c46b5b82eee733b8d053db19 (patch)
tree74dac4dcaab082077effb08a09f4d74a8873d072 /arch/arm
parent79966fd9b4781f9bd257312489ff511f2c01f210 (diff)
ARM: OMAP: Use gpiolib with tps65010 for OSK 5912
Convert OSK board to use new tps65010 gpiolib support. This includes moving its LED support from leds-osk to gpio-leds, giving more trigger options and a net platform code shrink. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-omap1/board-osk.c108
-rw-r--r--arch/arm/mach-omap1/leds-osk.c80
2 files changed, 71 insertions, 117 deletions
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index dd9ece8f409..4f9baba7d89 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -32,6 +32,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/i2c.h>
+#include <linux/leds.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -183,11 +184,80 @@ static struct platform_device *osk5912_devices[] __initdata = {
&osk5912_mcbsp1_device,
};
+static struct gpio_led tps_leds[] = {
+ /* NOTE: D9 and D2 have hardware blink support.
+ * Also, D9 requires non-battery power.
+ */
+ { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9", },
+ { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
+ { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
+ .default_trigger = "heartbeat", },
+};
+
+static struct gpio_led_platform_data tps_leds_data = {
+ .num_leds = 3,
+ .leds = tps_leds,
+};
+
+static struct platform_device osk5912_tps_leds = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev.platform_data = &tps_leds_data,
+};
+
+static int osk_tps_setup(struct i2c_client *client, void *context)
+{
+ /* Set GPIO 1 HIGH to disable VBUS power supply;
+ * OHCI driver powers it up/down as needed.
+ */
+ gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
+ gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+
+ /* Set GPIO 2 high so LED D3 is off by default */
+ tps65010_set_gpio_out_value(GPIO2, HIGH);
+
+ /* Set GPIO 3 low to take ethernet out of reset */
+ gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
+ gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
+
+ /* GPIO4 is VDD_DSP */
+ gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
+ gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
+ /* REVISIT if DSP support isn't configured, power it off ... */
+
+ /* Let LED1 (D9) blink; leds-gpio may override it */
+ tps65010_set_led(LED1, BLINK);
+
+ /* Set LED2 off by default */
+ tps65010_set_led(LED2, OFF);
+
+ /* Enable LOW_PWR handshake */
+ tps65010_set_low_pwr(ON);
+
+ /* Switch VLDO2 to 3.0V for AIC23 */
+ tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
+ | TPS_LDO1_ENABLE);
+
+ /* register these three LEDs */
+ osk5912_tps_leds.dev.parent = &client->dev;
+ platform_device_register(&osk5912_tps_leds);
+
+ return 0;
+}
+
+static struct tps65010_board tps_board = {
+ .base = OSK_TPS_GPIO_BASE,
+ .outmask = 0x0f,
+ .setup = osk_tps_setup,
+};
+
static struct i2c_board_info __initdata osk_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
.type = "tps65010",
.irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)),
+ .platform_data = &tps_board,
+
},
/* TODO when driver support is ready:
* - aic23 audio chip at 0x1a
@@ -488,44 +558,6 @@ static void __init osk_map_io(void)
omap1_map_common_io();
}
-#ifdef CONFIG_TPS65010
-static int __init osk_tps_init(void)
-{
- if (!machine_is_omap_osk())
- return 0;
-
- /* Let LED1 (D9) blink */
- tps65010_set_led(LED1, BLINK);
-
- /* Disable LED 2 (D2) */
- tps65010_set_led(LED2, OFF);
-
- /* Set GPIO 1 HIGH to disable VBUS power supply;
- * OHCI driver powers it up/down as needed.
- */
- tps65010_set_gpio_out_value(GPIO1, HIGH);
-
- /* Set GPIO 2 low to turn on LED D3 */
- tps65010_set_gpio_out_value(GPIO2, HIGH);
-
- /* Set GPIO 3 low to take ethernet out of reset */
- tps65010_set_gpio_out_value(GPIO3, LOW);
-
- /* gpio4 for VDD_DSP */
- /* FIXME send power to DSP iff it's configured */
-
- /* Enable LOW_PWR */
- tps65010_set_low_pwr(ON);
-
- /* Switch VLDO2 to 3.0V for AIC23 */
- tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
- | TPS_LDO1_ENABLE);
-
- return 0;
-}
-fs_initcall(osk_tps_init);
-#endif
-
MACHINE_START(OMAP_OSK, "TI-OSK")
/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
.phys_io = 0xfff00000,
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 026685ed461..754383dde80 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -1,11 +1,9 @@
/*
* linux/arch/arm/mach-omap1/leds-osk.c
*
- * LED driver for OSK, and optionally Mistral QVGA, boards
+ * LED driver for OSK with optional Mistral QVGA board
*/
#include <linux/init.h>
-#include <linux/workqueue.h>
-#include <linux/i2c/tps65010.h>
#include <asm/hardware.h>
#include <asm/leds.h>
@@ -20,49 +18,11 @@
#define LED_STATE_CLAIMED (1 << 1)
static u8 led_state;
-#define GREEN_LED (1 << 0) /* TPS65010 LED1 */
-#define AMBER_LED (1 << 1) /* TPS65010 LED2 */
-#define RED_LED (1 << 2) /* TPS65010 GPIO2 */
#define TIMER_LED (1 << 3) /* Mistral board */
#define IDLE_LED (1 << 4) /* Mistral board */
static u8 hw_led_state;
-/* TPS65010 leds are changed using i2c -- from a task context.
- * Using one of these for the "idle" LED would be impractical...
- */
-#define TPS_LEDS (GREEN_LED | RED_LED | AMBER_LED)
-
-static u8 tps_leds_change;
-
-static void tps_work(struct work_struct *unused)
-{
- for (;;) {
- u8 leds;
-
- local_irq_disable();
- leds = tps_leds_change;
- tps_leds_change = 0;
- local_irq_enable();
-
- if (!leds)
- break;
-
- /* careful: the set_led() value is on/off/blink */
- if (leds & GREEN_LED)
- tps65010_set_led(LED1, !!(hw_led_state & GREEN_LED));
- if (leds & AMBER_LED)
- tps65010_set_led(LED2, !!(hw_led_state & AMBER_LED));
-
- /* the gpio led doesn't have that issue */
- if (leds & RED_LED)
- tps65010_set_gpio_out_value(GPIO2,
- !(hw_led_state & RED_LED));
- }
-}
-
-static DECLARE_WORK(work, tps_work);
-
#ifdef CONFIG_OMAP_OSK_MISTRAL
/* For now, all system indicators require the Mistral board, since that
@@ -112,7 +72,6 @@ void osk_leds_event(led_event_t evt)
case led_stop:
led_state &= ~LED_STATE_ENABLED;
hw_led_state = 0;
- /* NOTE: work may still be pending!! */
break;
case led_claim:
@@ -145,48 +104,11 @@ void osk_leds_event(led_event_t evt)
#endif /* CONFIG_OMAP_OSK_MISTRAL */
- /* "green" == tps LED1 (leftmost, normally power-good)
- * works only with DC adapter, not on battery power!
- */
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GREEN_LED;
- break;
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GREEN_LED;
- break;
-
- /* "amber" == tps LED2 (middle) */
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= AMBER_LED;
- break;
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~AMBER_LED;
- break;
-
- /* "red" == LED on tps gpio3 (rightmost) */
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= RED_LED;
- break;
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~RED_LED;
- break;
-
default:
break;
}
leds ^= hw_led_state;
- leds &= TPS_LEDS;
- if (leds && (led_state & LED_STATE_CLAIMED)) {
- tps_leds_change |= leds;
- schedule_work(&work);
- }
done:
local_irq_restore(flags);