aboutsummaryrefslogtreecommitdiff
path: root/arch/avr32/boards
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2008-06-12 12:18:05 -0700
committerHaavard Skinnemoen <haavard.skinnemoen@atmel.com>2008-06-27 15:32:29 +0200
commit7ef31e9c4e711bfb817a15b54e428e5c4a7c0032 (patch)
tree672d3c41f57cda9f731c759a71b179fe9f80c61f /arch/avr32/boards
parentd86d314f67191011e6f494f6517b8cbd7dd3dc39 (diff)
avr32: improve NGW100 I2C/PMBus setup
Basic I2C initialization for the NGW100 board: - Provide empty i2c device table. Daughtercards may add devices, and the ATtiny24 could do stuff too. - Set up EXTINT(3) so the ATtiny24 can interrupt the AP7000. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Diffstat (limited to 'arch/avr32/boards')
-rw-r--r--arch/avr32/boards/atngw100/setup.c22
1 files changed, 22 insertions, 0 deletions
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 00ce961c52a..a51bb9fb3c8 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -9,6 +9,8 @@
*/
#include <linux/clk.h>
#include <linux/etherdevice.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/init.h>
#include <linux/linkage.h>
@@ -147,6 +149,10 @@ static struct platform_device i2c_gpio_device = {
},
};
+static struct i2c_board_info __initdata i2c_info[] = {
+ /* NOTE: original ATtiny24 firmware is at address 0x0b */
+};
+
static int __init atngw100_init(void)
{
unsigned i;
@@ -172,12 +178,28 @@ static int __init atngw100_init(void)
}
platform_device_register(&ngw_gpio_leds);
+ /* all these i2c/smbus pins should have external pullups for
+ * open-drain sharing among all I2C devices. SDA and SCL do;
+ * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus),
+ * but it's not available off-board.
+ */
+ at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP);
at32_select_gpio(i2c_gpio_data.sda_pin,
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
at32_select_gpio(i2c_gpio_data.scl_pin,
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
platform_device_register(&i2c_gpio_device);
+ i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
return 0;
}
postcore_initcall(atngw100_init);
+
+static int __init atngw100_arch_init(void)
+{
+ /* set_irq_type() after the arch_initcall for EIC has run, and
+ * before the I2C subsystem could try using this IRQ.
+ */
+ return set_irq_type(AT32_EXTINT(3), IRQ_TYPE_EDGE_FALLING);
+}
+arch_initcall(atngw100_arch_init);