Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (96 commits)
  Blackfin: stop cleaning include/asm/asm-offsets.h
  Blackfin: scale calibration when cpu freq changes
  Blackfin: eat spurious space in asm/dpmc.h
  Blackfin: fix anomaly 283 handling with exact hardware error
  Blackfin: bf537-stamp: add example ADXL346 orientation resources
  Blackfin: bf537-stamp: add example AD2S1210 IIO resources
  Blackfin: don't support keypad wakeup from hibernate
  Blackfin: bf537-stamp: add example AD7416 IIO resources
  Blackfin: bf537-stamp: add example ADP8860 backlight/led resources
  Blackfin: bf537-stamp: add example AD7414 temp sensor resources
  Blackfin: rename AD1836 to AD183X in board files
  Blackfin: bf537-stamp: add example AD2S120x resources
  Blackfin: add support for the on-chip MAC status interrupts
  Blackfin: asm/page.h: pull in asm-generic headers
  Blackfin: mark gpio lib functions static
  Blackfin: bf537-stamp: add example ADAU1361 resources
  Blackfin: GPIO: implement to_irq handler
  Blackfin: bf537-stamp: add example ADP122/ADP150 power regulator resources
  Blackfin: bf537-stamp: add example AD2S90 resources
  Blackfin: bf537-stamp: add example AD5398 power regulator resources
  ...

10 files changed, 299 insertions, 39 deletions

diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile
index 59e18afe28c..b3402971831 100644
--- a/arch/blackfin/mach-bf561/Makefile
+++ b/arch/blackfin/mach-bf561/Makefile
@@ -6,3 +6,4 @@ obj-y := ints-priority.o dma.o
 
 obj-$(CONFIG_BF561_COREB) += coreb.o
 obj-$(CONFIG_SMP)  += smp.o secondary.o atomic.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index 07e8dc8770d..5163e2c383c 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -176,7 +176,7 @@ static struct resource smsc911x_resources[] = {
 };
 
 static struct smsc911x_platform_config smsc911x_config = {
-	.flags = SMSC911X_USE_32BIT,
+	.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
 	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 	.phy_interface = PHY_INTERFACE_MODE_MII,
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index dfc8d5b7798..e127aedc1d7 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -72,7 +72,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -111,7 +111,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -305,21 +305,50 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -463,7 +492,9 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -516,3 +547,18 @@ static int __init cm_bf561_init(void)
 }
 
 arch_initcall(cm_bf561_init);
+
+static struct platform_device *cm_bf561_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf561_early_devices,
+		ARRAY_SIZE(cm_bf561_early_devices));
+}
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index ffd3e6a80d1..9b93e2f9579 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -160,21 +160,50 @@ static struct platform_device smc91x_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -245,8 +274,8 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -299,8 +328,8 @@ static struct platform_device bfin_spi0_device = {
 #endif
 
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -412,7 +441,9 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -458,3 +489,18 @@ static int __init ezkit_init(void)
 }
 
 arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
index 8ba7252455e..d3017e53686 100644
--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -42,6 +42,52 @@ static struct platform_device smc91x_device = {
 	.resource      = smc91x_resources,
 };
 
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
@@ -73,6 +119,13 @@ static struct platform_device bfin_sir0_device = {
 
 static struct platform_device *tepla_devices[] __initdata = {
 	&smc91x_device,
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
@@ -87,3 +140,18 @@ static int __init tepla_init(void)
 }
 
 arch_initcall(tepla_init);
+
+static struct platform_device *tepla_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(tepla_early_devices,
+		ARRAY_SIZE(tepla_early_devices));
+}
diff --git a/arch/blackfin/mach-bf561/hotplug.c b/arch/blackfin/mach-bf561/hotplug.c
new file mode 100644
index 00000000000..c95169b612d
--- /dev/null
+++ b/arch/blackfin/mach-bf561/hotplug.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *               Graff Yang <graf.yang@analog.com>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/blackfin.h>
+#include <asm/smp.h>
+#define SIC_SYSIRQ(irq)	(irq - (IRQ_CORETMR + 1))
+
+int hotplug_coreb;
+
+void platform_cpu_die(void)
+{
+	unsigned long iwr[2] = {0, 0};
+	unsigned long bank = SIC_SYSIRQ(IRQ_SUPPLE_0) / 32;
+	unsigned long bit = 1 << (SIC_SYSIRQ(IRQ_SUPPLE_0) % 32);
+
+	hotplug_coreb = 1;
+
+	iwr[bank] = bit;
+
+	/* disable core timer */
+	bfin_write_TCNTL(0);
+
+	/* clear ipi interrupt IRQ_SUPPLE_0 */
+	bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + 1)));
+	SSYNC();
+
+	coreb_sleep(iwr[0], iwr[1], 0);
+}
diff --git a/arch/blackfin/mach-bf561/include/mach/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h
index 7b208db267b..c95566ade51 100644
--- a/arch/blackfin/mach-bf561/include/mach/irq.h
+++ b/arch/blackfin/mach-bf561/include/mach/irq.h
@@ -265,7 +265,8 @@
 
 #define GPIO_IRQ_BASE		IRQ_PF0
 
-#define NR_IRQS			(IRQ_PF47 + 1)
+#define NR_MACH_IRQS		(IRQ_PF47 + 1)
+#define NR_IRQS			(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7			7
 #define IVG8			8
diff --git a/arch/blackfin/mach-bf561/include/mach/smp.h b/arch/blackfin/mach-bf561/include/mach/smp.h
index 390c7f4ae7b..2c8c514dd38 100644
--- a/arch/blackfin/mach-bf561/include/mach/smp.h
+++ b/arch/blackfin/mach-bf561/include/mach/smp.h
@@ -25,4 +25,6 @@ void platform_send_ipi_cpu(unsigned int cpu);
 
 void platform_clear_ipi(unsigned int cpu);
 
+void bfin_local_timer_setup(void);
+
 #endif /* !_MACH_BF561_SMP */
diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S
index 8e6050369c0..4624eebbf9c 100644
--- a/arch/blackfin/mach-bf561/secondary.S
+++ b/arch/blackfin/mach-bf561/secondary.S
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/asm-offsets.h>
+#include <asm/trace.h>
 
 __INIT
 
@@ -62,6 +63,8 @@ ENTRY(_coreb_trampoline_start)
 	M2 = r0;
 	M3 = r0;
 
+	trace_buffer_init(p0,r0);
+
 	/* Turn off the icache */
 	p0.l = LO(IMEM_CONTROL);
 	p0.h = HI(IMEM_CONTROL);
@@ -159,6 +162,41 @@ ENTRY(_coreb_trampoline_start)
 ENDPROC(_coreb_trampoline_start)
 ENTRY(_coreb_trampoline_end)
 
+.section ".text"
+ENTRY(_set_sicb_iwr)
+	P0.H = hi(SICB_IWR0);
+	P0.L = lo(SICB_IWR0);
+	P1.H = hi(SICB_IWR1);
+	P1.L = lo(SICB_IWR1);
+	[P0] = R0;
+	[P1] = R1;
+	SSYNC;
+	RTS;
+ENDPROC(_set_sicb_iwr)
+
+ENTRY(_coreb_sleep)
+	sp.l = lo(INITIAL_STACK);
+	sp.h = hi(INITIAL_STACK);
+	fp = sp;
+	usp = sp;
+
+	call _set_sicb_iwr;
+
+	CLI R2;
+	SSYNC;
+	IDLE;
+	STI R2;
+
+	R0 = IWR_DISABLE_ALL;
+	R1 = IWR_DISABLE_ALL;
+	call _set_sicb_iwr;
+
+	p0.h = hi(COREB_L1_CODE_START);
+	p0.l = lo(COREB_L1_CODE_START);
+	jump (p0);
+ENDPROC(_coreb_sleep)
+
+__CPUINIT
 ENTRY(_coreb_start)
 	[--sp] = reti;
 
@@ -176,12 +214,20 @@ ENTRY(_coreb_start)
 	sp = [p0];
 	usp = sp;
 	fp = sp;
+#ifdef CONFIG_HOTPLUG_CPU
+	p0.l = _hotplug_coreb;
+	p0.h = _hotplug_coreb;
+	r0 = [p0];
+	cc = BITTST(r0, 0);
+	if cc jump 3f;
+#endif
 	sp += -12;
 	call _init_pda
 	sp += 12;
+#ifdef CONFIG_HOTPLUG_CPU
+3:
+#endif
 	call _secondary_start_kernel;
 .L_exit:
 	jump.s	.L_exit;
 ENDPROC(_coreb_start)
-
-__FINIT
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index 0192532e96a..3b9a4bf7dac 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -11,11 +11,10 @@
 #include <linux/delay.h>
 #include <asm/smp.h>
 #include <asm/dma.h>
+#include <asm/time.h>
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static cpumask_t cpu_callin_map;
-
 /*
  * platform_init_cpus() - Tell the world about how many cores we
  * have. This is called while setting up the architecture support
@@ -66,13 +65,15 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	bfin_write_SICB_IAR5(bfin_read_SICA_IAR5());
 	bfin_write_SICB_IAR6(bfin_read_SICA_IAR6());
 	bfin_write_SICB_IAR7(bfin_read_SICA_IAR7());
+	bfin_write_SICB_IWR0(IWR_DISABLE_ALL);
+	bfin_write_SICB_IWR1(IWR_DISABLE_ALL);
 	SSYNC();
 
 	/* Store CPU-private information to the cpu_data array. */
 	bfin_setup_cpudata(cpu);
 
 	/* We are done with local CPU inits, unblock the boot CPU. */
-	cpu_set(cpu, cpu_callin_map);
+	set_cpu_online(cpu, true);
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
 }
@@ -81,28 +82,28 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle
 {
 	unsigned long timeout;
 
-	/* CoreB already running?! */
-	BUG_ON((bfin_read_SICA_SYSCR() & COREB_SRAM_INIT) == 0);
-
 	printk(KERN_INFO "Booting Core B.\n");
 
 	spin_lock(&boot_lock);
 
-	/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
-	SSYNC();
-	bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~COREB_SRAM_INIT);
-	SSYNC();
+	if ((bfin_read_SICA_SYSCR() & COREB_SRAM_INIT) == 0) {
+		/* CoreB already running, sending ipi to wakeup it */
+		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0);
+	} else {
+		/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
+		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~COREB_SRAM_INIT);
+		SSYNC();
+	}
 
 	timeout = jiffies + 1 * HZ;
 	while (time_before(jiffies, timeout)) {
-		if (cpu_isset(cpu, cpu_callin_map))
+		if (cpu_online(cpu))
 			break;
 		udelay(100);
 		barrier();
 	}
 
-	if (cpu_isset(cpu, cpu_callin_map)) {
-		cpu_set(cpu, cpu_online_map);
+	if (cpu_online(cpu)) {
 		/* release the lock and let coreb run */
 		spin_unlock(&boot_lock);
 		return 0;
@@ -147,3 +148,20 @@ void platform_clear_ipi(unsigned int cpu)
 	bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + cpu)));
 	SSYNC();
 }
+
+/*
+ * Setup core B's local core timer.
+ * In SMP, core timer is used for clock event device.
+ */
+void __cpuinit bfin_local_timer_setup(void)
+{
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+	bfin_coretmr_init();
+	bfin_coretmr_clockevent_init();
+	get_irq_chip(IRQ_CORETMR)->unmask(IRQ_CORETMR);
+#else
+	/* Power down the core timer, just to play safe. */
+	bfin_write_TCNTL(0);
+#endif
+
+}