[IA64] cpu hotplug: return offlined cpus to SAL

This patch is required to support cpu removal for IPF systems. Existing code
just fakes the real offline by keeping it run the idle thread, and polling
for the bit to re-appear in the cpu_state to get out of the idle loop.

For the cpu-offline to work correctly, we need to pass control of this CPU 
back to SAL so it can continue in the boot-rendez mode. This gives the
SAL control to not pick this cpu as the monarch processor for global MCA
events, and addition does not wait for this cpu to checkin with SAL
for global MCA events as well. The handoff is implemented as documented in 
SAL specification section 3.2.5.1 "OS_BOOT_RENDEZ to SAL return State"

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

1 files changed, 250 insertions, 30 deletions

diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 105c7fec8c6..0d535d65eea 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -15,6 +15,8 @@
  * Copyright (C) 1999 Don Dugger <Don.Dugger@intel.com>
  * Copyright (C) 2002 Fenghua Yu <fenghua.yu@intel.com>
  *   -Optimize __ia64_save_fpu() and __ia64_load_fpu() for Itanium 2.
+ * Copyright (C) 2004 Ashok Raj <ashok.raj@intel.com>
+ *   Support for CPU Hotplug
  */
 
 #include <linux/config.h>
@@ -29,6 +31,134 @@
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/system.h>
+#include <asm/mca_asm.h>
+
+#ifdef CONFIG_HOTPLUG_CPU
+#define SAL_PSR_BITS_TO_SET				\
+	(IA64_PSR_AC | IA64_PSR_BN | IA64_PSR_MFH | IA64_PSR_MFL)
+
+#define SAVE_FROM_REG(src, ptr, dest)	\
+	mov dest=src;;						\
+	st8 [ptr]=dest,0x08
+
+#define RESTORE_REG(reg, ptr, _tmp)		\
+	ld8 _tmp=[ptr],0x08;;				\
+	mov reg=_tmp
+
+#define SAVE_BREAK_REGS(ptr, _idx, _breg, _dest)\
+	mov ar.lc=IA64_NUM_DBG_REGS-1;; 			\
+	mov _idx=0;; 								\
+1: 												\
+	SAVE_FROM_REG(_breg[_idx], ptr, _dest);;	\
+	add _idx=1,_idx;;							\
+	br.cloop.sptk.many 1b
+
+#define RESTORE_BREAK_REGS(ptr, _idx, _breg, _tmp, _lbl)\
+	mov ar.lc=IA64_NUM_DBG_REGS-1;;			\
+	mov _idx=0;;							\
+_lbl:  RESTORE_REG(_breg[_idx], ptr, _tmp);;	\
+	add _idx=1, _idx;;						\
+	br.cloop.sptk.many _lbl
+
+#define SAVE_ONE_RR(num, _reg, _tmp) \
+	movl _tmp=(num<<61);;	\
+	mov _reg=rr[_tmp]
+
+#define SAVE_REGION_REGS(_tmp, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7) \
+	SAVE_ONE_RR(0,_r0, _tmp);; \
+	SAVE_ONE_RR(1,_r1, _tmp);; \
+	SAVE_ONE_RR(2,_r2, _tmp);; \
+	SAVE_ONE_RR(3,_r3, _tmp);; \
+	SAVE_ONE_RR(4,_r4, _tmp);; \
+	SAVE_ONE_RR(5,_r5, _tmp);; \
+	SAVE_ONE_RR(6,_r6, _tmp);; \
+	SAVE_ONE_RR(7,_r7, _tmp);;
+
+#define STORE_REGION_REGS(ptr, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7) \
+	st8 [ptr]=_r0, 8;; \
+	st8 [ptr]=_r1, 8;; \
+	st8 [ptr]=_r2, 8;; \
+	st8 [ptr]=_r3, 8;; \
+	st8 [ptr]=_r4, 8;; \
+	st8 [ptr]=_r5, 8;; \
+	st8 [ptr]=_r6, 8;; \
+	st8 [ptr]=_r7, 8;;
+
+#define RESTORE_REGION_REGS(ptr, _idx1, _idx2, _tmp) \
+	mov		ar.lc=0x08-1;;						\
+	movl	_idx1=0x00;;						\
+RestRR:											\
+	dep.z	_idx2=_idx1,61,3;;					\
+	ld8		_tmp=[ptr],8;;						\
+	mov		rr[_idx2]=_tmp;;					\
+	srlz.d;;									\
+	add		_idx1=1,_idx1;;						\
+	br.cloop.sptk.few	RestRR
+
+/*
+ * Adjust region registers saved before starting to save
+ * break regs and rest of the states that need to be preserved.
+ */
+#define SAL_TO_OS_BOOT_HANDOFF_STATE_SAVE(_reg1,_reg2,_pred)  \
+	SAVE_FROM_REG(b0,_reg1,_reg2);;						\
+	SAVE_FROM_REG(b1,_reg1,_reg2);;						\
+	SAVE_FROM_REG(b2,_reg1,_reg2);;						\
+	SAVE_FROM_REG(b3,_reg1,_reg2);;						\
+	SAVE_FROM_REG(b4,_reg1,_reg2);;						\
+	SAVE_FROM_REG(b5,_reg1,_reg2);;						\
+	st8 [_reg1]=r1,0x08;;								\
+	st8 [_reg1]=r12,0x08;;								\
+	st8 [_reg1]=r13,0x08;;								\
+	SAVE_FROM_REG(ar.fpsr,_reg1,_reg2);;				\
+	SAVE_FROM_REG(ar.pfs,_reg1,_reg2);;					\
+	SAVE_FROM_REG(ar.rnat,_reg1,_reg2);;				\
+	SAVE_FROM_REG(ar.unat,_reg1,_reg2);;				\
+	SAVE_FROM_REG(ar.bspstore,_reg1,_reg2);;			\
+	SAVE_FROM_REG(cr.dcr,_reg1,_reg2);;					\
+	SAVE_FROM_REG(cr.iva,_reg1,_reg2);;					\
+	SAVE_FROM_REG(cr.pta,_reg1,_reg2);;					\
+	SAVE_FROM_REG(cr.itv,_reg1,_reg2);;					\
+	SAVE_FROM_REG(cr.pmv,_reg1,_reg2);;					\
+	SAVE_FROM_REG(cr.cmcv,_reg1,_reg2);;				\
+	SAVE_FROM_REG(cr.lrr0,_reg1,_reg2);;				\
+	SAVE_FROM_REG(cr.lrr1,_reg1,_reg2);;				\
+	st8 [_reg1]=r4,0x08;;								\
+	st8 [_reg1]=r5,0x08;;								\
+	st8 [_reg1]=r6,0x08;;								\
+	st8 [_reg1]=r7,0x08;;								\
+	st8 [_reg1]=_pred,0x08;;							\
+	SAVE_FROM_REG(ar.lc, _reg1, _reg2);;				\
+	stf.spill.nta [_reg1]=f2,16;;						\
+	stf.spill.nta [_reg1]=f3,16;;						\
+	stf.spill.nta [_reg1]=f4,16;;						\
+	stf.spill.nta [_reg1]=f5,16;;						\
+	stf.spill.nta [_reg1]=f16,16;;						\
+	stf.spill.nta [_reg1]=f17,16;;						\
+	stf.spill.nta [_reg1]=f18,16;;						\
+	stf.spill.nta [_reg1]=f19,16;;						\
+	stf.spill.nta [_reg1]=f20,16;;						\
+	stf.spill.nta [_reg1]=f21,16;;						\
+	stf.spill.nta [_reg1]=f22,16;;						\
+	stf.spill.nta [_reg1]=f23,16;;						\
+	stf.spill.nta [_reg1]=f24,16;;						\
+	stf.spill.nta [_reg1]=f25,16;;						\
+	stf.spill.nta [_reg1]=f26,16;;						\
+	stf.spill.nta [_reg1]=f27,16;;						\
+	stf.spill.nta [_reg1]=f28,16;;						\
+	stf.spill.nta [_reg1]=f29,16;;						\
+	stf.spill.nta [_reg1]=f30,16;;						\
+	stf.spill.nta [_reg1]=f31,16;;
+
+#else
+#define SAL_TO_OS_BOOT_HANDOFF_STATE_SAVE(a1,a2)
+#define SAVE_REGION_REGS(_tmp, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7)
+#define STORE_REGION_REGS(ptr, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7)
+#endif
+
+#define SET_ONE_RR(num, pgsize, _tmp1, _tmp2, vhpt) \
+	movl _tmp1=(num << 61);;	\
+	mov _tmp2=((ia64_rid(IA64_REGION_ID_KERNEL, (num<<61)) << 8) | (pgsize << 2) | vhpt);; \
+	mov rr[_tmp1]=_tmp2
 
 	.section __special_page_section,"ax"
 
@@ -64,6 +194,12 @@ start_ap:
 	srlz.i
 	;;
 	/*
+	 * Save the region registers, predicate before they get clobbered
+	 */
+	SAVE_REGION_REGS(r2, r8,r9,r10,r11,r12,r13,r14,r15);
+	mov r25=pr;;
+
+	/*
 	 * Initialize kernel region registers:
 	 *	rr[0]: VHPT enabled, page size = PAGE_SHIFT
 	 *	rr[1]: VHPT enabled, page size = PAGE_SHIFT
@@ -76,32 +212,14 @@ start_ap:
 	 * We initialize all of them to prevent inadvertently assuming
 	 * something about the state of address translation early in boot.
 	 */
-	mov r6=((ia64_rid(IA64_REGION_ID_KERNEL, (0<<61)) << 8) | (PAGE_SHIFT << 2) | 1)
-	movl r7=(0<<61)
-	mov r8=((ia64_rid(IA64_REGION_ID_KERNEL, (1<<61)) << 8) | (PAGE_SHIFT << 2) | 1)
-	movl r9=(1<<61)
-	mov r10=((ia64_rid(IA64_REGION_ID_KERNEL, (2<<61)) << 8) | (PAGE_SHIFT << 2) | 1)
-	movl r11=(2<<61)
-	mov r12=((ia64_rid(IA64_REGION_ID_KERNEL, (3<<61)) << 8) | (PAGE_SHIFT << 2) | 1)
-	movl r13=(3<<61)
-	mov r14=((ia64_rid(IA64_REGION_ID_KERNEL, (4<<61)) << 8) | (PAGE_SHIFT << 2) | 1)
-	movl r15=(4<<61)
-	mov r16=((ia64_rid(IA64_REGION_ID_KERNEL, (5<<61)) << 8) | (PAGE_SHIFT << 2) | 1)
-	movl r17=(5<<61)
-	mov r18=((ia64_rid(IA64_REGION_ID_KERNEL, (6<<61)) << 8) | (IA64_GRANULE_SHIFT << 2))
-	movl r19=(6<<61)
-	mov r20=((ia64_rid(IA64_REGION_ID_KERNEL, (7<<61)) << 8) | (IA64_GRANULE_SHIFT << 2))
-	movl r21=(7<<61)
-	;;
-	mov rr[r7]=r6
-	mov rr[r9]=r8
-	mov rr[r11]=r10
-	mov rr[r13]=r12
-	mov rr[r15]=r14
-	mov rr[r17]=r16
-	mov rr[r19]=r18
-	mov rr[r21]=r20
-	;;
+	SET_ONE_RR(0, PAGE_SHIFT, r2, r16, 1);;
+	SET_ONE_RR(1, PAGE_SHIFT, r2, r16, 1);;
+	SET_ONE_RR(2, PAGE_SHIFT, r2, r16, 1);;
+	SET_ONE_RR(3, PAGE_SHIFT, r2, r16, 1);;
+	SET_ONE_RR(4, PAGE_SHIFT, r2, r16, 1);;
+	SET_ONE_RR(5, PAGE_SHIFT, r2, r16, 1);;
+	SET_ONE_RR(6, IA64_GRANULE_SHIFT, r2, r16, 0);;
+	SET_ONE_RR(7, IA64_GRANULE_SHIFT, r2, r16, 0);;
 	/*
 	 * Now pin mappings into the TLB for kernel text and data
 	 */
@@ -142,6 +260,13 @@ start_ap:
 	;;
 1:	// now we are in virtual mode
 
+	movl r2=sal_state_for_booting_cpu;;
+	ld8 r16=[r2];;
+
+	STORE_REGION_REGS(r16, r8,r9,r10,r11,r12,r13,r14,r15);
+	SAL_TO_OS_BOOT_HANDOFF_STATE_SAVE(r16,r17,r25)
+	;;
+
 	// set IVT entry point---can't access I/O ports without it
 	movl r3=ia64_ivt
 	;;
@@ -211,12 +336,13 @@ start_ap:
 	mov IA64_KR(CURRENT_STACK)=r16
 	mov r13=r2
 	/*
-	 * Reserve space at the top of the stack for "struct pt_regs".  Kernel threads
-	 * don't store interesting values in that structure, but the space still needs
-	 * to be there because time-critical stuff such as the context switching can
-	 * be implemented more efficiently (for example, __switch_to()
+	 * Reserve space at the top of the stack for "struct pt_regs".  Kernel
+	 * threads don't store interesting values in that structure, but the space
+	 * still needs to be there because time-critical stuff such as the context
+	 * switching can be implemented more efficiently (for example, __switch_to()
 	 * always sets the psr.dfh bit of the task it is switching to).
 	 */
+
 	addl r12=IA64_STK_OFFSET-IA64_PT_REGS_SIZE-16,r2
 	addl r2=IA64_RBS_OFFSET,r2	// initialize the RSE
 	mov ar.rsc=0		// place RSE in enforced lazy mode
@@ -993,4 +1119,98 @@ END(ia64_spinlock_contention)
 
 #endif
 
+#ifdef CONFIG_HOTPLUG_CPU
+GLOBAL_ENTRY(ia64_jump_to_sal)
+	alloc r16=ar.pfs,1,0,0,0;;
+	rsm psr.i  | psr.ic
+{
+	flushrs
+	srlz.i
+}
+	tpa r25=in0
+	movl r18=tlb_purge_done;;
+	DATA_VA_TO_PA(r18);;
+	mov b1=r18 	// Return location
+	movl r18=ia64_do_tlb_purge;;
+	DATA_VA_TO_PA(r18);;
+	mov b2=r18 	// doing tlb_flush work
+	mov ar.rsc=0  // Put RSE  in enforced lazy, LE mode
+	movl r17=1f;;
+	DATA_VA_TO_PA(r17);;
+	mov cr.iip=r17
+	movl r16=SAL_PSR_BITS_TO_SET;;
+	mov cr.ipsr=r16
+	mov cr.ifs=r0;;
+	rfi;;
+1:
+	/*
+	 * Invalidate all TLB data/inst
+	 */
+	br.sptk.many b2;; // jump to tlb purge code
+
+tlb_purge_done:
+	RESTORE_REGION_REGS(r25, r17,r18,r19);;
+	RESTORE_REG(b0, r25, r17);;
+	RESTORE_REG(b1, r25, r17);;
+	RESTORE_REG(b2, r25, r17);;
+	RESTORE_REG(b3, r25, r17);;
+	RESTORE_REG(b4, r25, r17);;
+	RESTORE_REG(b5, r25, r17);;
+	ld8 r1=[r25],0x08;;
+	ld8 r12=[r25],0x08;;
+	ld8 r13=[r25],0x08;;
+	RESTORE_REG(ar.fpsr, r25, r17);;
+	RESTORE_REG(ar.pfs, r25, r17);;
+	RESTORE_REG(ar.rnat, r25, r17);;
+	RESTORE_REG(ar.unat, r25, r17);;
+	RESTORE_REG(ar.bspstore, r25, r17);;
+	RESTORE_REG(cr.dcr, r25, r17);;
+	RESTORE_REG(cr.iva, r25, r17);;
+	RESTORE_REG(cr.pta, r25, r17);;
+	RESTORE_REG(cr.itv, r25, r17);;
+	RESTORE_REG(cr.pmv, r25, r17);;
+	RESTORE_REG(cr.cmcv, r25, r17);;
+	RESTORE_REG(cr.lrr0, r25, r17);;
+	RESTORE_REG(cr.lrr1, r25, r17);;
+	ld8 r4=[r25],0x08;;
+	ld8 r5=[r25],0x08;;
+	ld8 r6=[r25],0x08;;
+	ld8 r7=[r25],0x08;;
+	ld8 r17=[r25],0x08;;
+	mov pr=r17,-1;;
+	RESTORE_REG(ar.lc, r25, r17);;
+	/*
+	 * Now Restore floating point regs
+	 */
+	ldf.fill.nta f2=[r25],16;;
+	ldf.fill.nta f3=[r25],16;;
+	ldf.fill.nta f4=[r25],16;;
+	ldf.fill.nta f5=[r25],16;;
+	ldf.fill.nta f16=[r25],16;;
+	ldf.fill.nta f17=[r25],16;;
+	ldf.fill.nta f18=[r25],16;;
+	ldf.fill.nta f19=[r25],16;;
+	ldf.fill.nta f20=[r25],16;;
+	ldf.fill.nta f21=[r25],16;;
+	ldf.fill.nta f22=[r25],16;;
+	ldf.fill.nta f23=[r25],16;;
+	ldf.fill.nta f24=[r25],16;;
+	ldf.fill.nta f25=[r25],16;;
+	ldf.fill.nta f26=[r25],16;;
+	ldf.fill.nta f27=[r25],16;;
+	ldf.fill.nta f28=[r25],16;;
+	ldf.fill.nta f29=[r25],16;;
+	ldf.fill.nta f30=[r25],16;;
+	ldf.fill.nta f31=[r25],16;;
+
+	/*
+	 * Now that we have done all the register restores
+	 * we are now ready for the big DIVE to SAL Land
+	 */
+	ssm psr.ic;;
+	srlz.d;;
+	br.ret.sptk.many b0;;
+END(ia64_jump_to_sal)
+#endif /* CONFIG_HOTPLUG_CPU */
+
 #endif /* CONFIG_SMP */