MERGE-via-pending-tracking-hist-MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141

pending-tracking-hist top was MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141 / fdf777a63bcb59e0dfd78bfe2c6242e01f6d4eb9 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040

stable-tracking-hist top was MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 / 90463bfd2d5a3c8b52f6e6d71024a00e052b0ced ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-mokopatches-tracking-hist-fix-stray-endmenu-patch

mokopatches-tracking-hist top was fix-stray-endmenu-patch / 3630e0be570de8057e7f8d2fe501ed353cdf34e6 ... parent commitmessage:
From: Andy Green <andy@openmoko.com>
fix-stray-endmenu.patch

Signed-off-by: Andy Green <andy@openmoko.com>

31 files changed, 663 insertions, 1042 deletions

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 50467f9d0d0..861914747e4 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -126,10 +126,12 @@ config SH_RTS7751R2D
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
 
-config SH_RSK7203
-	bool "RSK7203"
-	select GENERIC_GPIO
-	depends on CPU_SUBTYPE_SH7203
+config SH_RSK
+	bool "Renesas Starter Kit"
+	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203
+	help
+	 Select this option if configuring for any of the RSK+ MCU
+	 evaluation platforms.
 
 config SH_SDK7780
 	bool "SDK7780R3"
@@ -253,6 +255,7 @@ source "arch/sh/boards/mach-r2d/Kconfig"
 source "arch/sh/boards/mach-highlander/Kconfig"
 source "arch/sh/boards/mach-sdk7780/Kconfig"
 source "arch/sh/boards/mach-migor/Kconfig"
+source "arch/sh/boards/mach-rsk/Kconfig"
 
 if SH_MAGIC_PANEL_R2
 
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index d9efa392372..269ae2be49e 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -3,7 +3,6 @@
 #
 obj-$(CONFIG_SH_AP325RXA)	+= board-ap325rxa.o
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
-obj-$(CONFIG_SH_RSK7203)	+= board-rsk7203.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 8881a643ac3..1c67cba6e34 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -197,6 +197,10 @@ static struct resource lcdc_resources[] = {
 		.end	= 0xfe941fff,
 		.flags	= IORESOURCE_MEM,
 	},
+	[1] = {
+		.start	= 28,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device lcdc_device = {
@@ -303,6 +307,7 @@ static struct resource ceu_resources[] = {
 
 static struct platform_device ceu_device = {
 	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
 	.num_resources	= ARRAY_SIZE(ceu_resources),
 	.resource	= ceu_resources,
 	.dev		= {
@@ -344,7 +349,6 @@ static int __init ap325rxa_devices_setup(void)
 	gpio_export(GPIO_PTF7, 0);
 
 	/* LCDC */
-	clk_always_enable("mstp200");
 	gpio_request(GPIO_FN_LCDD15, NULL);
 	gpio_request(GPIO_FN_LCDD14, NULL);
 	gpio_request(GPIO_FN_LCDD13, NULL);
@@ -375,7 +379,6 @@ static int __init ap325rxa_devices_setup(void)
 	gpio_direction_output(GPIO_PTS3, 1);
 
 	/* CEU */
-	clk_always_enable("mstp203");
 	gpio_request(GPIO_FN_VIO_CLK2, NULL);
 	gpio_request(GPIO_FN_VIO_VD2, NULL);
 	gpio_request(GPIO_FN_VIO_HD2, NULL);
diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c
index 5cc0867de5a..b1dcbbc8918 100644
--- a/arch/sh/boards/board-shmin.c
+++ b/arch/sh/boards/board-shmin.c
@@ -22,21 +22,13 @@ static void __init init_shmin_irq(void)
 	plat_irq_setup_pins(IRQ_MODE_IRQ);
 }
 
-static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
+static void __init shmin_setup(char **cmdline_p)
 {
-	static int dummy;
-
-	if ((port & ~0x1f) == SHMIN_NE_BASE)
-		return (void __iomem *)(SHMIN_IO_BASE + port);
-
-	dummy = 0;
-
-	return &dummy;
-
+	__set_io_port_base(SHMIN_IO_BASE);
 }
 
 static struct sh_machine_vector mv_shmin __initmv = {
 	.mv_name	= "SHMIN",
+	.mv_setup	= shmin_setup,
 	.mv_init_irq	= init_shmin_irq,
-	.mv_ioport_map	= shmin_ioport_map,
 };
diff --git a/arch/sh/boards/mach-cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
index 489a8f86736..cafe1ac3b29 100644
--- a/arch/sh/boards/mach-cayman/Makefile
+++ b/arch/sh/boards/mach-cayman/Makefile
@@ -2,4 +2,3 @@
 # Makefile for the Hitachi Cayman specific parts of the kernel
 #
 obj-y := setup.o irq.o
-obj-$(CONFIG_HEARTBEAT)	+= led.o
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index ceb37ae92c7..da62ad51699 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -94,31 +94,11 @@ static void ack_cayman_irq(unsigned int irq)
 	disable_cayman_irq(irq);
 }
 
-static void end_cayman_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_cayman_irq(irq);
-}
-
-static unsigned int startup_cayman_irq(unsigned int irq)
-{
-	enable_cayman_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_cayman_irq(unsigned int irq)
-{
-	disable_cayman_irq(irq);
-}
-
-struct hw_interrupt_type cayman_irq_type = {
-	.typename	= "Cayman-IRQ",
-	.startup	= startup_cayman_irq,
-	.shutdown	= shutdown_cayman_irq,
-	.enable		= enable_cayman_irq,
-	.disable	= disable_cayman_irq,
-	.ack		= ack_cayman_irq,
-	.end		= end_cayman_irq,
+struct irq_chip cayman_irq_type = {
+	.name		= "Cayman-IRQ",
+	.unmask 	= enable_cayman_irq,
+	.mask		= disable_cayman_irq,
+	.mask_ack	= ack_cayman_irq,
 };
 
 int cayman_irq_demux(int evt)
@@ -187,8 +167,9 @@ void init_cayman_irq(void)
 		return;
 	}
 
-	for (i=0; i<NR_EXT_IRQS; i++) {
-		irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
+	for (i = 0; i < NR_EXT_IRQS; i++) {
+		set_irq_chip_and_handler(START_EXT_IRQS + i, &cayman_irq_type,
+					 handle_level_irq);
 	}
 
 	/* Setup the SMSC interrupt */
diff --git a/arch/sh/boards/mach-cayman/led.c b/arch/sh/boards/mach-cayman/led.c
deleted file mode 100644
index a808eac4ecd..00000000000
--- a/arch/sh/boards/mach-cayman/led.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/sh/boards/cayman/led.c
- *
- * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Flash the LEDs
- */
-#include <asm/io.h>
-
-/*
-** It is supposed these functions to be used for a low level
-** debugging (via Cayman LEDs), hence to be available as soon
-** as possible.
-** Unfortunately Cayman LEDs relies on Cayman EPLD to be mapped
-** (this happen when IRQ are initialized... quite late).
-** These triky dependencies should be removed. Temporary, it
-** may be enough to NOP until EPLD is mapped.
-*/
-
-extern unsigned long epld_virt;
-
-#define LED_ADDR      (epld_virt + 0x008)
-#define HDSP2534_ADDR (epld_virt + 0x100)
-
-void mach_led(int position, int value)
-{
-	if (!epld_virt)
-		return;
-
-	if (value)
-		ctrl_outl(0, LED_ADDR);
-	else
-		ctrl_outl(1, LED_ADDR);
-
-}
-
-void mach_alphanum(int position, unsigned char value)
-{
-	if (!epld_virt)
-		return;
-
-	ctrl_outb(value, HDSP2534_ADDR + 0xe0 + (position << 2));
-}
-
-void mach_alphanum_brightness(int setting)
-{
-	ctrl_outb(setting & 7, HDSP2534_ADDR + 0xc0);
-}
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index 67bdc33dd41..f55fc8e795e 100644
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -10,106 +10,90 @@
  */
 
 #include <linux/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/irq.h>
 #include <mach/sysasic.h>
 
-/* Dreamcast System ASIC Hardware Events -
-
-   The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
-   hardware events from system peripherals and triggering an SH7750 IRQ.
-   Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
-   set in the Event Mask Registers (EMRs).  When a hardware event is
-   triggered, it's corresponding bit in the Event Status Registers (ESRs)
-   is set, and that bit should be rewritten to the ESR to acknowledge that
-   event.
-
-   There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908.  Event
-   types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
-   groups of EMRs that parallel the ESRs.  Each EMR group corresponds to an
-   IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
-   triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
-
-   In the kernel, these events are mapped to virtual IRQs so that drivers can
-   respond to them as they would a normal interrupt.  In order to keep this
-   mapping simple, the events are mapped as:
-
-   6900/6910 - Events  0-31, IRQ 13
-   6904/6924 - Events 32-63, IRQ 11
-   6908/6938 - Events 64-95, IRQ  9
-
-*/
+/*
+ * Dreamcast System ASIC Hardware Events -
+ *
+ * The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
+ * hardware events from system peripherals and triggering an SH7750 IRQ.
+ * Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
+ * set in the Event Mask Registers (EMRs).  When a hardware event is
+ * triggered, its corresponding bit in the Event Status Registers (ESRs)
+ * is set, and that bit should be rewritten to the ESR to acknowledge that
+ * event.
+ *
+ * There are three 32-bit ESRs located at 0xa05f6900 - 0xa05f6908.  Event
+ * types can be found in arch/sh/include/mach-dreamcast/mach/sysasic.h.
+ * There are three groups of EMRs that parallel the ESRs.  Each EMR group
+ * corresponds to an IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13,
+ * 0xa05f6920 - 0xa05f6928 triggers IRQ 11, and 0xa05f6930 - 0xa05f6938
+ * triggers IRQ 9.
+ *
+ * In the kernel, these events are mapped to virtual IRQs so that drivers can
+ * respond to them as they would a normal interrupt.  In order to keep this
+ * mapping simple, the events are mapped as:
+ *
+ * 6900/6910 - Events  0-31, IRQ 13
+ * 6904/6924 - Events 32-63, IRQ 11
+ * 6908/6938 - Events 64-95, IRQ  9
+ *
+ */
 
 #define ESR_BASE 0x005f6900    /* Base event status register */
 #define EMR_BASE 0x005f6910    /* Base event mask register */
 
-/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
-   1 = 0x6920, 2 = 0x6930; also determine the event offset */
+/*
+ * Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
+ * 1 = 0x6920, 2 = 0x6930; also determine the event offset.
+ */
 #define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
 
 /* Return the hardware event's bit positon within the EMR/ESR */
 #define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
 
-/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ
-   (logically mapped to the corresponding bit for the hardware event). */
+/*
+ * For each of these *_irq routines, the IRQ passed in is the virtual IRQ
+ * (logically mapped to the corresponding bit for the hardware event).
+ */
 
 /* Disable the hardware event by masking its bit in its EMR */
 static inline void disable_systemasic_irq(unsigned int irq)
 {
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
+	__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+	__u32 mask;
 
-        mask = inl(emr);
-        mask &= ~(1 << EVENT_BIT(irq));
-        outl(mask, emr);
+	mask = inl(emr);
+	mask &= ~(1 << EVENT_BIT(irq));
+	outl(mask, emr);
 }
 
 /* Enable the hardware event by setting its bit in its EMR */
 static inline void enable_systemasic_irq(unsigned int irq)
 {
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
+	__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+	__u32 mask;
 
-        mask = inl(emr);
-        mask |= (1 << EVENT_BIT(irq));
-        outl(mask, emr);
+	mask = inl(emr);
+	mask |= (1 << EVENT_BIT(irq));
+	outl(mask, emr);
 }
 
 /* Acknowledge a hardware event by writing its bit back to its ESR */
-static void ack_systemasic_irq(unsigned int irq)
-{
-        __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
-        disable_systemasic_irq(irq);
-        outl((1 << EVENT_BIT(irq)), esr);
-}
-
-/* After a IRQ has been ack'd and responded to, it needs to be renabled */
-static void end_systemasic_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-                enable_systemasic_irq(irq);
-}
-
-static unsigned int startup_systemasic_irq(unsigned int irq)
-{
-        enable_systemasic_irq(irq);
-
-        return 0;
-}
-
-static void shutdown_systemasic_irq(unsigned int irq)
+static void mask_ack_systemasic_irq(unsigned int irq)
 {
-        disable_systemasic_irq(irq);
+	__u32 esr = ESR_BASE + (LEVEL(irq) << 2);
+	disable_systemasic_irq(irq);
+	outl((1 << EVENT_BIT(irq)), esr);
 }
 
-struct hw_interrupt_type systemasic_int = {
-        .typename       = "System ASIC",
-        .startup        = startup_systemasic_irq,
-        .shutdown       = shutdown_systemasic_irq,
-        .enable         = enable_systemasic_irq,
-        .disable        = disable_systemasic_irq,
-        .ack            = ack_systemasic_irq,
-        .end            = end_systemasic_irq,
+struct irq_chip systemasic_int = {
+	.name		= "System ASIC",
+	.mask		= disable_systemasic_irq,
+	.mask_ack	= mask_ack_systemasic_irq,
+	.unmask		= enable_systemasic_irq,
 };
 
 /*
@@ -117,37 +101,37 @@ struct hw_interrupt_type systemasic_int = {
  */
 int systemasic_irq_demux(int irq)
 {
-        __u32 emr, esr, status, level;
-        __u32 j, bit;
-
-        switch (irq) {
-                case 13:
-                        level = 0;
-                        break;
-                case 11:
-                        level = 1;
-                        break;
-                case  9:
-                        level = 2;
-                        break;
-                default:
-                        return irq;
-        }
-        emr = EMR_BASE + (level << 4) + (level << 2);
-        esr = ESR_BASE + (level << 2);
-
-        /* Mask the ESR to filter any spurious, unwanted interrupts */
-        status = inl(esr);
-        status &= inl(emr);
-
-        /* Now scan and find the first set bit as the event to map */
-        for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
-                if (status & bit) {
-                        irq = HW_EVENT_IRQ_BASE + j + (level << 5);
-                        return irq;
-                }
-        }
-
-        /* Not reached */
-        return irq;
+	__u32 emr, esr, status, level;
+	__u32 j, bit;
+
+	switch (irq) {
+	case 13:
+		level = 0;
+		break;
+	case 11:
+		level = 1;
+		break;
+	case  9:
+		level = 2;
+		break;
+	default:
+		return irq;
+	}
+	emr = EMR_BASE + (level << 4) + (level << 2);
+	esr = ESR_BASE + (level << 2);
+
+	/* Mask the ESR to filter any spurious, unwanted interrupts */
+	status = inl(esr);
+	status &= inl(emr);
+
+	/* Now scan and find the first set bit as the event to map */
+	for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
+		if (status & bit) {
+			irq = HW_EVENT_IRQ_BASE + j + (level << 5);
+			return irq;
+		}
+	}
+
+	/* Not reached */
+	return irq;
 }
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index 7d944fc75e9..d1bee4884cd 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -28,7 +28,7 @@
 #include <asm/machvec.h>
 #include <mach/sysasic.h>
 
-extern struct hw_interrupt_type systemasic_int;
+extern struct irq_chip systemasic_int;
 extern void aica_time_init(void);
 extern int gapspci_init(void);
 extern int systemasic_irq_demux(int);
@@ -47,7 +47,8 @@ static void __init dreamcast_setup(char **cmdline_p)
 
 	/* Assign all virtual IRQs to the System ASIC int. handler */
 	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
-		irq_desc[i].chip = &systemasic_int;
+		set_irq_chip_and_handler(i, &systemasic_int,
+					 handle_level_irq);
 
 	board_time_init = aica_time_init;
 
diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index 14bdd531f11..cd54acb5149 100644
--- a/arch/sh/boards/mach-edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
@@ -3,4 +3,3 @@
 #
 
 obj-y	 := setup.o io.o
-
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 7d153e50a01..5b9c57c4324 100644
--- a/arch/sh/boards/mach-edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
@@ -10,28 +10,24 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/edosk7705.h>
 #include <asm/addrspace.h>
 
 #define SMC_IOADDR	0xA2000000
 
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
 /* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
+static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
 {
-     if (port >= 0x300 && port < 0x320) {
-	  /* SMC91C96 registers are 4 byte aligned rather than the
-	   * usual 2 byte!
-	   */
-	  return SMC_IOADDR + ( (port - 0x300) * 2);
-     }
+	/*
+	 * SMC91C96 registers are 4 byte aligned rather than the
+	 * usual 2 byte!
+	 */
+	if (port >= 0x300 && port < 0x320)
+		return SMC_IOADDR + ((port - 0x300) * 2);
 
-     maybebadio(sh_edosk7705_isa_port2addr, port);
-     return port;
+	maybebadio(port);
+	return port;
 }
 
 /* Trying to read / write bytes on odd-byte boundaries to the Ethernet
@@ -42,53 +38,34 @@ unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
  */
 unsigned char sh_edosk7705_inb(unsigned long port)
 {
-	if (port >= 0x300 && port < 0x320 && port & 0x01) {
-		return (volatile unsigned char)(generic_inw(port -1) >> 8);
-	}
-	return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port);
-}
+	if (port >= 0x300 && port < 0x320 && port & 0x01)
+		return __raw_readw(port - 1) >> 8;
 
-unsigned int sh_edosk7705_inl(unsigned long port)
-{
-	return *(volatile unsigned long *)port;
+	return __raw_readb(sh_edosk7705_isa_port2addr(port));
 }
 
 void sh_edosk7705_outb(unsigned char value, unsigned long port)
 {
 	if (port >= 0x300 && port < 0x320 && port & 0x01) {
-		generic_outw(((unsigned short)value << 8), port -1);
+		__raw_writew(((unsigned short)value << 8), port - 1);
 		return;
 	}
-	*(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value;
-}
 
-void sh_edosk7705_outl(unsigned int value, unsigned long port)
-{
-	*(volatile unsigned long *)port = value;
+	__raw_writeb(value, sh_edosk7705_isa_port2addr(port));
 }
 
 void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
 {
 	unsigned char *p = addr;
-	while (count--) *p++ = sh_edosk7705_inb(port);
-}
 
-void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned long *p = (unsigned long*)addr;
 	while (count--)
-		*p++ = *(volatile unsigned long *)port;
+		*p++ = sh_edosk7705_inb(port);
 }
 
 void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
 {
-	unsigned char *p = (unsigned char*)addr;
-	while (count--) sh_edosk7705_outb(*p++, port);
-}
+	unsigned char *p = (unsigned char *)addr;
 
-void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned long *p = (unsigned long*)addr;
-	while (count--) sh_edosk7705_outl(*p++, port);
+	while (count--)
+		sh_edosk7705_outb(*p++, port);
 }
-
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index ab3f47bffdf..d59225e26fb 100644
--- a/arch/sh/boards/mach-edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
@@ -9,6 +9,7 @@
  * board by S. Dunn, 2003.
  */
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <asm/machvec.h>
 #include <mach/edosk7705.h>
 
@@ -26,18 +27,10 @@ static struct sh_machine_vector mv_edosk7705 __initmv = {
 	.mv_nr_irqs		= 80,
 
 	.mv_inb			= sh_edosk7705_inb,
-	.mv_inl			= sh_edosk7705_inl,
 	.mv_outb		= sh_edosk7705_outb,
-	.mv_outl		= sh_edosk7705_outl,
-
-	.mv_inl_p		= sh_edosk7705_inl,
-	.mv_outl_p		= sh_edosk7705_outl,
 
 	.mv_insb		= sh_edosk7705_insb,
-	.mv_insl		= sh_edosk7705_insl,
 	.mv_outsb		= sh_edosk7705_outsb,
-	.mv_outsl		= sh_edosk7705_outsl,
 
-	.mv_isa_port2addr	= sh_edosk7705_isa_port2addr,
 	.mv_init_irq		= sh_edosk7705_init_irq,
 };
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index 64af1f2eef0..d936c1af762 100644
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -10,15 +10,91 @@
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
 #include <asm/io.h>
 #include <asm/hd64461.h>
 #include <mach/hp6xx.h>
 #include <cpu/dac.h>
-#include <asm/pm.h>
+#include <asm/freq.h>
+#include <asm/watchdog.h>
+
+#define INTR_OFFSET	0x600
 
 #define STBCR		0xffffff82
 #define STBCR2		0xffffff88
 
+#define STBCR_STBY	0x80
+#define STBCR_MSTP2	0x04
+
+#define MCR		0xffffff68
+#define RTCNT		0xffffff70
+
+#define MCR_RMODE	2
+#define MCR_RFSH	4
+
+extern u8 wakeup_start;
+extern u8 wakeup_end;
+
+static void pm_enter(void)
+{
+	u8 stbcr, csr;
+	u16 frqcr, mcr;
+	u32 vbr_new, vbr_old;
+
+	set_bl_bit();
+
+	/* set wdt */
+	csr = sh_wdt_read_csr();
+	csr &= ~WTCSR_TME;
+	csr |= WTCSR_CKS_4096;
+	sh_wdt_write_csr(csr);
+	csr = sh_wdt_read_csr();
+	sh_wdt_write_cnt(0);
+
+	/* disable PLL1 */
+	frqcr = ctrl_inw(FRQCR);
+	frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
+	ctrl_outw(frqcr, FRQCR);
+
+	/* enable standby */
+	stbcr = ctrl_inb(STBCR);
+	ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
+
+	/* set self-refresh */
+	mcr = ctrl_inw(MCR);
+	ctrl_outw(mcr & ~MCR_RFSH, MCR);
+
+	/* set interrupt handler */
+	asm volatile("stc vbr, %0" : "=r" (vbr_old));
+	vbr_new = get_zeroed_page(GFP_ATOMIC);
+	udelay(50);
+	memcpy((void*)(vbr_new + INTR_OFFSET),
+	       &wakeup_start, &wakeup_end - &wakeup_start);
+	asm volatile("ldc %0, vbr" : : "r" (vbr_new));
+
+	ctrl_outw(0, RTCNT);
+	ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR);
+
+	cpu_sleep();
+
+	asm volatile("ldc %0, vbr" : : "r" (vbr_old));
+
+	free_page(vbr_new);
+
+	/* enable PLL1 */
+	frqcr = ctrl_inw(FRQCR);
+	frqcr |= FRQCR_PSTBY;
+	ctrl_outw(frqcr, FRQCR);
+	udelay(50);
+	frqcr |= FRQCR_PLLEN;
+	ctrl_outw(frqcr, FRQCR);
+
+	ctrl_outb(stbcr, STBCR);
+
+	clear_bl_bit();
+}
+
 static int hp6x0_pm_enter(suspend_state_t state)
 {
 	u8 stbcr, stbcr2;
diff --git a/arch/sh/boards/mach-microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
index 1387dd6c85e..4e3588e8806 100644
--- a/arch/sh/boards/mach-microdev/Makefile
+++ b/arch/sh/boards/mach-microdev/Makefile
@@ -2,7 +2,4 @@
 # Makefile for the SuperH MicroDev specific parts of the kernel
 #
 
-obj-y	 := setup.o irq.o io.o
-
-obj-$(CONFIG_HEARTBEAT)	+= led.o
-
+obj-y	 := setup.o irq.o io.o fdc37c93xapm.o
diff --git a/arch/sh/boards/mach-microdev/fdc37c93xapm.c b/arch/sh/boards/mach-microdev/fdc37c93xapm.c
new file mode 100644
index 00000000000..458a7cf5fb4
--- /dev/null
+++ b/arch/sh/boards/mach-microdev/fdc37c93xapm.c
@@ -0,0 +1,160 @@
+/*
+ *
+ * Setup for the SMSC FDC37C93xAPM
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ * Copyright (C) 2003, 2004 SuperH, Inc.
+ * Copyright (C) 2004, 2005 Paul Mundt
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/microdev.h>
+
+#define SMSC_CONFIG_PORT_ADDR	 (0x3F0)
+#define SMSC_INDEX_PORT_ADDR	 SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR	 (SMSC_INDEX_PORT_ADDR + 1)
+
+#define SMSC_ENTER_CONFIG_KEY	 0x55
+#define SMSC_EXIT_CONFIG_KEY	 0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX	 0x07	/* Logical Device Number */
+#define SMSC_DEVICE_ID_INDEX	 0x20	/* Device ID */
+#define SMSC_DEVICE_REV_INDEX	 0x21	/* Device Revision */
+#define SMSC_ACTIVATE_INDEX	 0x30	/* Activate */
+#define SMSC_PRIMARY_BASE_INDEX	 0x60	/* Primary Base Address */
+#define SMSC_SECONDARY_BASE_INDEX 0x62	/* Secondary Base Address */
+#define SMSC_PRIMARY_INT_INDEX	 0x70	/* Primary Interrupt Select */
+#define SMSC_SECONDARY_INT_INDEX 0x72	/* Secondary Interrupt Select */
+#define SMSC_HDCS0_INDEX	 0xf0	/* HDCS0 Address Decoder */
+#define SMSC_HDCS1_INDEX	 0xf1	/* HDCS1 Address Decoder */
+
+#define SMSC_IDE1_DEVICE	1	/* IDE #1 logical device */
+#define SMSC_IDE2_DEVICE	2	/* IDE #2 logical device */
+#define SMSC_PARALLEL_DEVICE	3	/* Parallel Port logical device */
+#define SMSC_SERIAL1_DEVICE	4	/* Serial #1 logical device */
+#define SMSC_SERIAL2_DEVICE	5	/* Serial #2 logical device */
+#define SMSC_KEYBOARD_DEVICE	7	/* Keyboard logical device */
+#define SMSC_CONFIG_REGISTERS	8	/* Configuration Registers (Aux I/O) */
+
+#define SMSC_READ_INDEXED(index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_WRITE_INDEXED(val, index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define	IDE1_PRIMARY_BASE	0x01f0	/* Task File Registe base for IDE #1 */
+#define	IDE1_SECONDARY_BASE	0x03f6	/* Miscellaneous AT registers for IDE #1 */
+#define	IDE2_PRIMARY_BASE	0x0170	/* Task File Registe base for IDE #2 */
+#define	IDE2_SECONDARY_BASE	0x0376	/* Miscellaneous AT registers for IDE #2 */
+
+#define SERIAL1_PRIMARY_BASE	0x03f8
+#define SERIAL2_PRIMARY_BASE	0x02f8
+
+#define	MSB(x)		( (x) >> 8 )
+#define	LSB(x)		( (x) & 0xff )
+
+	/* General-Purpose base address on CPU-board FPGA */
+#define	MICRODEV_FPGA_GP_BASE		0xa6100000ul
+
+static int __init smsc_superio_setup(void)
+{
+
+	unsigned char devid, devrev;
+
+		/* Initially the chip is in run state */
+		/* Put it into configuration state */
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+		/* Read device ID info */
+	devid  = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+	devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+
+	if ((devid == 0x30) && (devrev == 0x01))
+		printk("SMSC FDC37C93xAPM SuperIO device detected\n");
+	else
+		return -ENODEV;
+
+		/* Select the keyboard device */
+	SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
+
+		/* Select the Serial #1 device */
+	SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the Serial #2 device */
+	SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the IDE#1 device */
+	SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
+		/* select the interrupt */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the IDE#2 device */
+	SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+		/* select the interrupt */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the configuration registers */
+	SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
+		/* enable the appropriate GPIO pins for IDE functionality:
+		 * bit[0]   In/Out		1==input;  0==output
+		 * bit[1]   Polarity		1==invert; 0==no invert
+		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable
+		 * bit[3:4] Function Select	00==original; 01==Alternate Function #1
+		 */
+	SMSC_WRITE_INDEXED(0x00, 0xc2);	/* GP42 = nIDE1_OE */
+	SMSC_WRITE_INDEXED(0x01, 0xc5);	/* GP45 = IDE1_IRQ */
+	SMSC_WRITE_INDEXED(0x00, 0xc6);	/* GP46 = nIOROP */
+	SMSC_WRITE_INDEXED(0x00, 0xc7);	/* GP47 = nIOWOP */
+	SMSC_WRITE_INDEXED(0x08, 0xe8);	/* GP20 = nIDE2_OE */
+
+		/* Exit the configuration state */
+	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	return 0;
+}
+device_initcall(smsc_superio_setup);
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index 702753cbd28..b551963579c 100644
--- a/arch/sh/boards/mach-microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
@@ -67,27 +67,13 @@ static const struct {
 
 static void enable_microdev_irq(unsigned int irq);
 static void disable_microdev_irq(unsigned int irq);
-
-	/* shutdown is same as "disable" */
-#define shutdown_microdev_irq disable_microdev_irq
-
 static void mask_and_ack_microdev(unsigned int);
-static void end_microdev_irq(unsigned int irq);
-
-static unsigned int startup_microdev_irq(unsigned int irq)
-{
-	enable_microdev_irq(irq);
-	return 0;		/* never anything pending */
-}
 
-static struct hw_interrupt_type microdev_irq_type = {
-	.typename = "MicroDev-IRQ",
-	.startup = startup_microdev_irq,
-	.shutdown = shutdown_microdev_irq,
-	.enable = enable_microdev_irq,
-	.disable = disable_microdev_irq,
+static struct irq_chip microdev_irq_type = {
+	.name = "MicroDev-IRQ",
+	.unmask = enable_microdev_irq,
+	.mask = disable_microdev_irq,
 	.ack = mask_and_ack_microdev,
-	.end = end_microdev_irq
 };
 
 static void disable_microdev_irq(unsigned int irq)
@@ -130,11 +116,11 @@ static void enable_microdev_irq(unsigned int irq)
 	ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
 }
 
-	/* This functions sets the desired irq handler to be a MicroDev type */
+/* This function sets the desired irq handler to be a MicroDev type */
 static void __init make_microdev_irq(unsigned int irq)
 {
 	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &microdev_irq_type;
+	set_irq_chip_and_handler(irq, &microdev_irq_type, handle_level_irq);
 	disable_microdev_irq(irq);
 }
 
@@ -143,17 +129,11 @@ static void mask_and_ack_microdev(unsigned int irq)
 	disable_microdev_irq(irq);
 }
 
-static void end_microdev_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_microdev_irq(irq);
-}
-
 extern void __init init_microdev_irq(void)
 {
 	int i;
 
-		/* disable interrupts on the FPGA INTC register */
+	/* disable interrupts on the FPGA INTC register */
 	ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
 
 	for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
@@ -179,5 +159,3 @@ extern void microdev_print_fpga_intc_status(void)
 	printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria);
 	printk("-------------------------------------------------------------------------------\n");
 }
-
-
diff --git a/arch/sh/boards/mach-microdev/led.c b/arch/sh/boards/mach-microdev/led.c
deleted file mode 100644
index 36e54b47a75..00000000000
--- a/arch/sh/boards/mach-microdev/led.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/arch/sh/boards/superh/microdev/led.c
- *
- * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
- * Copyright (C) 2003 Richard Curnow (Richard.Curnow@superh.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- */
-
-#include <asm/io.h>
-
-#define LED_REGISTER 0xa6104d20
-
-static void mach_led_d9(int value)
-{
-	unsigned long reg;
-	reg = ctrl_inl(LED_REGISTER);
-	reg &= ~1;
-	reg |= (value & 1);
-	ctrl_outl(reg, LED_REGISTER);
-	return;
-}
-
-static void mach_led_d10(int value)
-{
-	unsigned long reg;
-	reg = ctrl_inl(LED_REGISTER);
-	reg &= ~2;
-	reg |= ((value & 1) << 1);
-	ctrl_outl(reg, LED_REGISTER);
-	return;
-}
-
-
-#ifdef CONFIG_HEARTBEAT
-#include <linux/sched.h>
-
-static unsigned char banner_table[] = {
-	0x11, 0x01, 0x11, 0x01, 0x11, 0x03,
-	0x11, 0x01, 0x11, 0x01, 0x13, 0x03,
-	0x11, 0x01, 0x13, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x11, 0x03,
-	0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x11, 0x07,
-	0x13, 0x01, 0x13, 0x03,
-	0x11, 0x01, 0x11, 0x03,
-	0x13, 0x01, 0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x13, 0x01, 0x13, 0x01, 0x13, 0x03,
-	0x13, 0x01, 0x11, 0x01, 0x11, 0x03,
-	0x11, 0x03,
-	0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x13, 0x07,
-	0xff
-};
-
-static void banner(void)
-{
-	static int pos = 0;
-	static int count = 0;
-
-	if (count) {
-		count--;
-	} else {
-		int val = banner_table[pos];
-		if (val == 0xff) {
-			pos = 0;
-			val = banner_table[pos];
-		}
-		pos++;
-		mach_led_d10((val >> 4) & 1);
-		count = 10 * (val & 0xf);
-	}
-}
-
-/* From heartbeat_harp in the stboards directory */
-/* acts like an actual heart beat -- ie thump-thump-pause... */
-void microdev_heartbeat(void)
-{
-	static unsigned cnt = 0, period = 0, dist = 0;
-
-	if (cnt == 0 || cnt == dist)
-		mach_led_d9(1);
-	else if (cnt == 7 || cnt == dist+7)
-		mach_led_d9(0);
-
-	if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	}
-
-	banner();
-}
-
-#endif
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index a9202fe3cb5..d1df2a4fb9b 100644
--- a/arch/sh/boards/mach-microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
@@ -17,70 +17,12 @@
 #include <mach/microdev.h>
 #include <asm/io.h>
 #include <asm/machvec.h>
-
-extern void microdev_heartbeat(void);
-
-
-/****************************************************************************/
-
-
-	/*
-	 * Setup for the SMSC FDC37C93xAPM
-	 */
-#define SMSC_CONFIG_PORT_ADDR	 (0x3F0)
-#define SMSC_INDEX_PORT_ADDR	 SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR	 (SMSC_INDEX_PORT_ADDR + 1)
-
-#define SMSC_ENTER_CONFIG_KEY	 0x55
-#define SMSC_EXIT_CONFIG_KEY	 0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX 	 0x07	/* Logical Device Number */
-#define SMSC_DEVICE_ID_INDEX	 0x20	/* Device ID */
-#define SMSC_DEVICE_REV_INDEX	 0x21	/* Device Revision */
-#define SMSC_ACTIVATE_INDEX	 0x30	/* Activate */
-#define SMSC_PRIMARY_BASE_INDEX	 0x60	/* Primary Base Address */
-#define SMSC_SECONDARY_BASE_INDEX 0x62	/* Secondary Base Address */
-#define SMSC_PRIMARY_INT_INDEX	 0x70	/* Primary Interrupt Select */
-#define SMSC_SECONDARY_INT_INDEX 0x72	/* Secondary Interrupt Select */
-#define SMSC_HDCS0_INDEX	 0xf0	/* HDCS0 Address Decoder */
-#define SMSC_HDCS1_INDEX	 0xf1	/* HDCS1 Address Decoder */
-
-#define SMSC_IDE1_DEVICE	1	/* IDE #1 logical device */
-#define SMSC_IDE2_DEVICE	2	/* IDE #2 logical device */
-#define SMSC_PARALLEL_DEVICE	3	/* Parallel Port logical device */
-#define SMSC_SERIAL1_DEVICE	4	/* Serial #1 logical device */
-#define SMSC_SERIAL2_DEVICE	5	/* Serial #2 logical device */
-#define SMSC_KEYBOARD_DEVICE	7	/* Keyboard logical device */
-#define SMSC_CONFIG_REGISTERS	8	/* Configuration Registers (Aux I/O) */
-
-#define SMSC_READ_INDEXED(index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_WRITE_INDEXED(val, index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	outb((val),   SMSC_DATA_PORT_ADDR); })
-
-#define	IDE1_PRIMARY_BASE	0x01f0	/* Task File Registe base for IDE #1 */
-#define	IDE1_SECONDARY_BASE	0x03f6	/* Miscellaneous AT registers for IDE #1 */
-#define	IDE2_PRIMARY_BASE	0x0170	/* Task File Registe base for IDE #2 */
-#define	IDE2_SECONDARY_BASE	0x0376	/* Miscellaneous AT registers for IDE #2 */
-
-#define SERIAL1_PRIMARY_BASE	0x03f8
-#define SERIAL2_PRIMARY_BASE	0x02f8
-
-#define	MSB(x)		( (x) >> 8 )
-#define	LSB(x)		( (x) & 0xff )
-
-	/* General-Purpose base address on CPU-board FPGA */
-#define	MICRODEV_FPGA_GP_BASE		0xa6100000ul
-
-	/* assume a Keyboard Controller is present */
-int microdev_kbd_controller_present = 1;
+#include <asm/sizes.h>
 
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start		= 0x300,
-		.end		= 0x300 + 0x0001000 - 1,
+		.end		= 0x300 + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -97,7 +39,6 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
-#ifdef CONFIG_FB_S1D13XXX
 static struct s1d13xxxfb_regval s1d13806_initregs[] = {
 	{ S1DREG_MISC,			0x00 },
 	{ S1DREG_COM_DISP_MODE,		0x00 },
@@ -216,12 +157,12 @@ static struct s1d13xxxfb_pdata s1d13806_platform_data = {
 static struct resource s1d13806_resources[] = {
 	[0] = {
 		.start		= 0x07200000,
-		.end		= 0x07200000 + 0x00200000 - 1,
+		.end		= 0x07200000 + SZ_2M - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
 		.start		= 0x07000000,
-		.end		= 0x07000000 + 0x00200000 - 1,
+		.end		= 0x07000000 + SZ_2M - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -236,145 +177,24 @@ static struct platform_device s1d13806_device = {
 		.platform_data	= &s1d13806_platform_data,
 	},
 };
-#endif
 
 static struct platform_device *microdev_devices[] __initdata = {
 	&smc91x_device,
-#ifdef CONFIG_FB_S1D13XXX
 	&s1d13806_device,
-#endif
 };
 
 static int __init microdev_devices_setup(void)
 {
 	return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
 }
-
-/*
- * Setup for the SMSC FDC37C93xAPM
- */
-static int __init smsc_superio_setup(void)
-{
-
-	unsigned char devid, devrev;
-
-		/* Initially the chip is in run state */
-		/* Put it into configuration state */
-	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-		/* Read device ID info */
-	devid  = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
-	devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-	if ( (devid==0x30) && (devrev==0x01) )
-	{
-  		printk("SMSC FDC37C93xAPM SuperIO device detected\n");
-	}
-	else
-	{		/* not the device identity we expected */
-		printk("Not detected a SMSC FDC37C93xAPM SuperIO device (devid=0x%02x, rev=0x%02x)\n",
-			devid, devrev);
-			/* inform the keyboard driver that we have no keyboard controller */
-		microdev_kbd_controller_present = 0;
-			/* little point in doing anything else in this functon */
-		return 0;
-	}
-
-		/* Select the keyboard device */
-	SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
-
-		/* Select the Serial #1 device */
-	SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the Serial #2 device */
-	SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the IDE#1 device */
-	SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
-		/* select the interrupt */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the IDE#2 device */
-	SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
-		/* select the interrupt */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the configuration registers */
-	SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
-		/* enable the appropriate GPIO pins for IDE functionality:
-		 * bit[0]   In/Out		1==input;  0==output
-		 * bit[1]   Polarity		1==invert; 0==no invert
-		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable
-		 * bit[3:4] Function Select	00==original; 01==Alternate Function #1
-		 */
-	SMSC_WRITE_INDEXED(0x00, 0xc2);	/* GP42 = nIDE1_OE */
-	SMSC_WRITE_INDEXED(0x01, 0xc5);	/* GP45 = IDE1_IRQ */
-	SMSC_WRITE_INDEXED(0x00, 0xc6);	/* GP46 = nIOROP */
-	SMSC_WRITE_INDEXED(0x00, 0xc7);	/* GP47 = nIOWOP */
-	SMSC_WRITE_INDEXED(0x08, 0xe8);	/* GP20 = nIDE2_OE */
-
-		/* Exit the configuration state */
-	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-	return 0;
-}
-
-static void __init microdev_setup(char **cmdline_p)
-{
-	int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
-	const int fpgaRevision = *fpgaRevisionRegister;
-	int * const CacheControlRegister = (int*)CCR;
-
-	device_initcall(microdev_devices_setup);
-	device_initcall(smsc_superio_setup);
-
-	printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
-		get_system_type(), fpgaRevision, *CacheControlRegister);
-}
+device_initcall(microdev_devices_setup);
 
 /*
  * The Machine Vector
  */
 static struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_name		= "SH4-202 MicroDev",
-	.mv_setup		= microdev_setup,
-	.mv_nr_irqs		= 72,		/* QQQ need to check this - use the MACRO */
+	.mv_nr_irqs		= 72,
 
 	.mv_inb			= microdev_inb,
 	.mv_inw			= microdev_inw,
@@ -398,8 +218,4 @@ static struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_outsl		= microdev_outsl,
 
 	.mv_init_irq		= init_microdev_irq,
-
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= microdev_heartbeat,
-#endif
 };
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 97528198029..cc1408119c2 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -89,6 +89,7 @@ static struct resource sh_keysc_resources[] = {
 
 static struct platform_device sh_keysc_device = {
 	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
 	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
 	.resource       = sh_keysc_resources,
 	.dev	= {
@@ -261,6 +262,8 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 		.sys_bus_cfg = {
 			.ldmt2r = 0x06000a09,
 			.ldmt3r = 0x180e3418,
+			/* set 1s delay to encourage fsync() */
+			.deferred_io_msec = 1000,
 		},
 	}
 #endif
@@ -273,6 +276,10 @@ static struct resource migor_lcdc_resources[] = {
 		.end	= 0xfe941fff,
 		.flags	= IORESOURCE_MEM,
 	},
+	[1] = {
+		.start	= 28,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device migor_lcdc_device = {
@@ -300,6 +307,7 @@ static void camera_power_on(void)
 	gpio_set_value(GPIO_PTT3, 0);
 	mdelay(10);
 	gpio_set_value(GPIO_PTT3, 1);
+	mdelay(10); /* wait to let chip come out of reset */
 }
 
 static void camera_power_off(void)
@@ -432,6 +440,7 @@ static struct resource migor_ceu_resources[] = {
 
 static struct platform_device migor_ceu_device = {
 	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
 	.num_resources	= ARRAY_SIZE(migor_ceu_resources),
 	.resource	= migor_ceu_resources,
 	.dev	= {
@@ -479,7 +488,6 @@ static int __init migor_devices_setup(void)
 	ctrl_outl(0x00110080, BSC_CS4WCR);
 
 	/* KEYSC */
-	clk_always_enable("mstp214"); /* KEYSC */
 	gpio_request(GPIO_FN_KEYOUT0, NULL);
 	gpio_request(GPIO_FN_KEYOUT1, NULL);
 	gpio_request(GPIO_FN_KEYOUT2, NULL);
@@ -501,7 +509,6 @@ static int __init migor_devices_setup(void)
 	gpio_request(GPIO_FN_IRQ6, NULL);
 
 	/* LCD Panel */
-	clk_always_enable("mstp200"); /* LCDC */
 #ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
 	gpio_request(GPIO_FN_LCDD17, NULL);
 	gpio_request(GPIO_FN_LCDD16, NULL);
@@ -554,7 +561,6 @@ static int __init migor_devices_setup(void)
 #endif
 
 	/* CEU */
-	clk_always_enable("mstp203"); /* CEU */
 	gpio_request(GPIO_FN_VIO_CLK2, NULL);
 	gpio_request(GPIO_FN_VIO_VD2, NULL);
 	gpio_request(GPIO_FN_VIO_HD2, NULL);
@@ -589,12 +595,3 @@ static int __init migor_devices_setup(void)
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
 __initcall(migor_devices_setup);
-
-static void __init migor_setup(char **cmdline_p)
-{
-}
-
-static struct sh_machine_vector mv_migor __initmv = {
-	.mv_name		= "Migo-R",
-	.mv_setup		= migor_setup,
-};
diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig
new file mode 100644
index 00000000000..bff095dffc0
--- /dev/null
+++ b/arch/sh/boards/mach-rsk/Kconfig
@@ -0,0 +1,18 @@
+if SH_RSK
+
+choice
+	prompt "RSK+ options"
+	default SH_RSK7203
+
+config SH_RSK7201
+	bool "RSK7201"
+	depends on CPU_SUBTYPE_SH7201
+
+config SH_RSK7203
+	bool "RSK7203"
+	select GENERIC_GPIO
+	depends on CPU_SUBTYPE_SH7203
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/mach-rsk/Makefile b/arch/sh/boards/mach-rsk/Makefile
new file mode 100644
index 00000000000..498da75ce38
--- /dev/null
+++ b/arch/sh/boards/mach-rsk/Makefile
@@ -0,0 +1,2 @@
+obj-y				:= setup.o
+obj-$(CONFIG_SH_RSK7203)	+= devices-rsk7203.o
diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index 58266f06134..73f743b9be8 100644
--- a/arch/sh/boards/board-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -50,73 +50,6 @@ static struct platform_device smc911x_device = {
 	},
 };
 
-static const char *probes[] = { "cmdlinepart", NULL };
-
-static struct mtd_partition *parsed_partitions;
-
-static struct mtd_partition rsk7203_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0x00000000,
-		.size		= 0x00040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "Kernel",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= 0x001c0000,
-	}, {
-		.name		= "Flash_FS",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data flash_data = {
-	.width		= 2,
-};
-
-static struct resource flash_resource = {
-	.start		= 0x20000000,
-	.end		= 0x20400000,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &flash_resource,
-	.num_resources	= 1,
-	.dev		= {
-		.platform_data = &flash_data,
-	},
-};
-
-static struct mtd_info *flash_mtd;
-
-static struct map_info rsk7203_flash_map = {
-	.name		= "RSK+ Flash",
-	.size		= 0x400000,
-	.bankwidth	= 2,
-};
-
-static void __init set_mtd_partitions(void)
-{
-	int nr_parts = 0;
-
-	simple_map_init(&rsk7203_flash_map);
-	flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
-	nr_parts = parse_mtd_partitions(flash_mtd, probes,
-					&parsed_partitions, 0);
-	/* If there is no partition table, used the hard coded table */
-	if (nr_parts <= 0) {
-		flash_data.parts = rsk7203_partitions;
-		flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
-	} else {
-		flash_data.nr_parts = nr_parts;
-		flash_data.parts = parsed_partitions;
-	}
-}
-
 static struct gpio_led rsk7203_gpio_leds[] = {
 	{
 		.name			= "green",
@@ -155,7 +88,6 @@ static struct platform_device led_device = {
 
 static struct platform_device *rsk7203_devices[] __initdata = {
 	&smc911x_device,
-	&flash_device,
 	&led_device,
 };
 
@@ -165,15 +97,7 @@ static int __init rsk7203_devices_setup(void)
 	gpio_request(GPIO_FN_TXD0, NULL);
 	gpio_request(GPIO_FN_RXD0, NULL);
 
-	set_mtd_partitions();
 	return platform_add_devices(rsk7203_devices,
 				    ARRAY_SIZE(rsk7203_devices));
 }
 device_initcall(rsk7203_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_rsk7203 __initmv = {
-	.mv_name        = "RSK+7203",
-};
diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c
new file mode 100644
index 00000000000..af64d030a5c
--- /dev/null
+++ b/arch/sh/boards/mach-rsk/setup.c
@@ -0,0 +1,106 @@
+/*
+ * Renesas Technology Europe RSK+ Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x20000000,
+	.end		= 0x20400000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk_flash_map = {
+	.name		= "RSK+ Flash",
+	.size		= 0x400000,
+	.bankwidth	= 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+	int nr_parts = 0;
+
+	simple_map_init(&rsk_flash_map);
+	flash_mtd = do_map_probe("cfi_probe", &rsk_flash_map);
+	nr_parts = parse_mtd_partitions(flash_mtd, probes,
+					&parsed_partitions, 0);
+	/* If there is no partition table, used the hard coded table */
+	if (nr_parts <= 0) {
+		flash_data.parts = rsk_partitions;
+		flash_data.nr_parts = ARRAY_SIZE(rsk_partitions);
+	} else {
+		flash_data.nr_parts = nr_parts;
+		flash_data.parts = parsed_partitions;
+	}
+}
+
+static struct platform_device *rsk_devices[] __initdata = {
+	&flash_device,
+};
+
+static int __init rsk_devices_setup(void)
+{
+	set_mtd_partitions();
+	return platform_add_devices(rsk_devices,
+				    ARRAY_SIZE(rsk_devices));
+}
+device_initcall(rsk_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk __initmv = {
+	.mv_name        = "RSK+",
+};
diff --git a/arch/sh/boards/mach-se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
index 3024796c620..4c3666a9379 100644
--- a/arch/sh/boards/mach-se/7343/Makefile
+++ b/arch/sh/boards/mach-se/7343/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the 7343 SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c
deleted file mode 100644
index 8741abc1da7..00000000000
--- a/arch/sh/boards/mach-se/7343/io.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * arch/sh/boards/se/7343/io.c
- *
- * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
- *
- */
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7343.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
-	unsigned long start, end;
-	unsigned long base;
-	struct iop *(*check) (struct iop * p, unsigned long port);
-	unsigned char (*inb) (struct iop * p, unsigned long port);
-	unsigned short (*inw) (struct iop * p, unsigned long port);
-	void (*outb) (struct iop * p, unsigned char value, unsigned long port);
-	void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
-	static int count;
-
-	if (count < 100)
-		count++;
-
-	port &= 0xFFFF;
-
-	if ((p->start <= port) && (port <= p->end))
-		return p;
-	else
-		badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
-	if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
-		return p;
-	return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
-	return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
-	return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	*(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
-	*(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-	unsigned long v;
-
-	if (port & 1)
-		addr += 0x00400000;
-	v = *(volatile unsigned char *) addr;
-	return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-
-	if (port & 1)
-		addr += 0x00400000;
-	*(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
-	badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	badio(inw, port);
-}
-
-#ifdef CONFIG_SMC91X
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
-	.start = 0x00,
-	.end = 0x0F,
-	.base = 0x04000000,
-	.check = simple_check,
-	.inb = simple_inb,
-	.inw = simple_inw,
-	.outb = simple_outb,
-	.outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_NE2000
-/* NE2000 pc card NIC */
-static struct iop neiop = {
-	.start = 0x280,
-	.end = 0x29f,
-	.base = 0xb0600000 + 0x80,	/* soft 0x280 -> hard 0x300 */
-	.check = simple_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_IDE
-/* CF in CF slot */
-static struct iop cfiop = {
-	.base = 0xb0600000,
-	.check = ide_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-#endif
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
-	if (0) ;
-#if defined(CONFIG_SMC91X)
-	else if (laniop.check(&laniop, port))
-		return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
-	else if (neiop.check(&neiop, port))
-		return &neiop;
-#endif
-#if defined(CONFIG_IDE)
-	else if (cfiop.check(&cfiop, port))
-		return &cfiop;
-#endif
-	else
-		return NULL;
-}
-
-static inline void
-delay(void)
-{
-	ctrl_inw(0xac000000);
-	ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh7343se_inb(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inb) (p, port);
-}
-
-unsigned char
-sh7343se_inb_p(unsigned long port)
-{
-	unsigned char v = sh7343se_inb(port);
-	delay();
-	return v;
-}
-
-unsigned short
-sh7343se_inw(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inw) (p, port);
-}
-
-unsigned int
-sh7343se_inl(unsigned long port)
-{
-	badio(inl, port);
-}
-
-void
-sh7343se_outb(unsigned char value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outb) (p, value, port);
-}
-
-void
-sh7343se_outb_p(unsigned char value, unsigned long port)
-{
-	sh7343se_outb(value, port);
-	delay();
-}
-
-void
-sh7343se_outw(unsigned short value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outw) (p, value, port);
-}
-
-void
-sh7343se_outl(unsigned int value, unsigned long port)
-{
-	badio(outl, port);
-}
-
-void
-sh7343se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned char *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inb) (p, port);
-}
-
-void
-sh7343se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned short *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inw) (p, port);
-}
-
-void
-sh7343se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	badio(insl, port);
-}
-
-void
-sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned char *a = (unsigned char *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outb) (p, *a++, port);
-}
-
-void
-sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned short *a = (unsigned short *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outw) (p, *a++, port);
-}
-
-void
-sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	badio(outsw, port);
-}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
index 486f40bf927..4de56f35f41 100644
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -1,36 +1,16 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/usb/isp116x.h>
+#include <linux/delay.h>
 #include <asm/machvec.h>
 #include <mach-se/mach/se7343.h>
 #include <asm/heartbeat.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x1000000F,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/*
-		 * shared with other devices via externel
-		 * interrupt controller in FPGA...
-		 */
-		.start	= SMC_IRQ,
-		.end	= SMC_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
 static struct resource heartbeat_resources[] = {
 	[0] = {
 		.start	= PA_LED,
@@ -94,10 +74,83 @@ static struct platform_device nor_flash_device = {
 	.resource	= nor_flash_resources,
 };
 
+#define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	[0] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x16000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.irq		= UARTA_IRQ,
+		.uartclk	= 7372800,
+	},
+	[1] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x17000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.irq		= UARTB_IRQ,
+		.uartclk	= 7372800,
+	},
+	{ },
+};
+
+static struct platform_device uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static void isp116x_delay(struct device *dev, int delay)
+{
+	ndelay(delay);
+}
+
+static struct resource usb_resources[] = {
+	[0] = {
+		.start  = 0x11800000,
+		.end    = 0x11800001,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 0x11800002,
+		.end    = 0x11800003,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = USB_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp116x_platform_data usb_platform_data = {
+	.sel15Kres		= 1,
+	.oc_enable		= 1,
+	.int_act_high		= 0,
+	.int_edge_triggered	= 0,
+	.remote_wakeup_enable	= 0,
+	.delay			= isp116x_delay,
+};
+
+static struct platform_device usb_device = {
+	.name			= "isp116x-hcd",
+	.id			= -1,
+	.num_resources  	= ARRAY_SIZE(usb_resources),
+	.resource       	= usb_resources,
+	.dev			= {
+		.platform_data	= &usb_platform_data,
+	},
+
+};
+
 static struct platform_device *sh7343se_platform_devices[] __initdata = {
-	&smc91x_device,
 	&heartbeat_device,
 	&nor_flash_device,
+	&uart_device,
+	&usb_device,
 };
 
 static int __init sh7343se_devices_setup(void)
@@ -126,27 +179,6 @@ static void __init sh7343se_setup(char **cmdline_p)
 static struct sh_machine_vector mv_7343se __initmv = {
 	.mv_name = "SolutionEngine 7343",
 	.mv_setup = sh7343se_setup,
-	.mv_nr_irqs = 108,
-	.mv_inb = sh7343se_inb,
-	.mv_inw = sh7343se_inw,
-	.mv_inl = sh7343se_inl,
-	.mv_outb = sh7343se_outb,
-	.mv_outw = sh7343se_outw,
-	.mv_outl = sh7343se_outl,
-
-	.mv_inb_p = sh7343se_inb_p,
-	.mv_inw_p = sh7343se_inw,
-	.mv_inl_p = sh7343se_inl,
-	.mv_outb_p = sh7343se_outb_p,
-	.mv_outw_p = sh7343se_outw,
-	.mv_outl_p = sh7343se_outl,
-
-	.mv_insb = sh7343se_insb,
-	.mv_insw = sh7343se_insw,
-	.mv_insl = sh7343se_insl,
-	.mv_outsb = sh7343se_outsb,
-	.mv_outsw = sh7343se_outsw,
-	.mv_outsl = sh7343se_outsl,
-
+	.mv_nr_irqs = SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_NR,
 	.mv_init_irq = init_7343se_IRQ,
 };
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
index 9123d9687bf..527eb6b1261 100644
--- a/arch/sh/boards/mach-se/770x/setup.c
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -8,8 +8,9 @@
  */
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <asm/machvec.h>
 #include <mach-se/mach/se.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/smc37c93x.h>
 #include <asm/heartbeat.h>
@@ -175,6 +176,7 @@ static struct platform_device *se_devices[] __initdata = {
 
 static int __init se_devices_setup(void)
 {
+	mrshpc_setup_windows();
 	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
 }
 device_initcall(se_devices_setup);
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
index d3fc80ff4d8..55af4c36b43 100644
--- a/arch/sh/boards/mach-se/7721/setup.c
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -12,8 +12,9 @@
  */
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <asm/machvec.h>
 #include <mach-se/mach/se7721.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 
@@ -74,8 +75,8 @@ static struct platform_device *se7721_devices[] __initdata = {
 
 static int __init se7721_devices_setup(void)
 {
-	return platform_add_devices(se7721_devices,
-		ARRAY_SIZE(se7721_devices));
+	mrshpc_setup_windows();
+	return platform_add_devices(se7721_devices, ARRAY_SIZE(se7721_devices));
 }
 device_initcall(se7721_devices_setup);
 
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index fe6f96517e1..af84904ed86 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -15,9 +15,10 @@
 #include <linux/ata_platform.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
+#include <mach-se/mach/se7722.h>
+#include <mach-se/mach/mrshpc.h>
 #include <asm/machvec.h>
 #include <asm/clock.h>
-#include <mach-se/mach/se7722.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_keysc.h>
@@ -130,6 +131,7 @@ static struct resource sh_keysc_resources[] = {
 
 static struct platform_device sh_keysc_device = {
 	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
 	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
 	.resource       = sh_keysc_resources,
 	.dev	= {
@@ -146,10 +148,8 @@ static struct platform_device *se7722_devices[] __initdata = {
 
 static int __init se7722_devices_setup(void)
 {
-	clk_always_enable("mstp214"); /* KEYSC */
-
-	return platform_add_devices(se7722_devices,
-		ARRAY_SIZE(se7722_devices));
+	mrshpc_setup_windows();
+	return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
 }
 device_initcall(se7722_devices_setup);
 
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
index 5771219be3f..74cfb4b8b03 100644
--- a/arch/sh/boards/mach-sh03/setup.c
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -9,6 +9,7 @@
 #include <linux/irq.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
+#include <linux/ata_platform.h>
 #include <asm/io.h>
 #include <asm/rtc.h>
 #include <mach-sh03/mach/io.h>
@@ -20,19 +21,6 @@ static void __init init_sh03_IRQ(void)
 	plat_irq_setup_pins(IRQ_MODE_IRQ);
 }
 
-extern void *cf_io_base;
-
-static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
-{
-	if (PXSEG(port))
-		return (void __iomem *)port;
-	/* CompactFlash (IDE) */
-	if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
-		return (void __iomem *)((unsigned long)cf_io_base + port);
-
-        return (void __iomem *)(port + PCI_IO_BASE);
-}
-
 /* arch/sh/boards/sh03/rtc.c */
 void sh03_time_init(void);
 
@@ -41,6 +29,30 @@ static void __init sh03_setup(char **cmdline_p)
 	board_time_init = sh03_time_init;
 }
 
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = 0x1f0,
+		.end    = 0x1f0 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = 0x1f0 + 0x206,
+		.end    = 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = IRL2_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
 static struct resource heartbeat_resources[] = {
 	[0] = {
 		.start	= 0xa0800000,
@@ -58,10 +70,30 @@ static struct platform_device heartbeat_device = {
 
 static struct platform_device *sh03_devices[] __initdata = {
 	&heartbeat_device,
+	&cf_ide_device,
 };
 
 static int __init sh03_devices_setup(void)
 {
+	pgprot_t prot;
+	unsigned long paddrbase;
+	void *cf_ide_base;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+	if (!cf_ide_base) {
+		printk("allocate_cf_area : can't open CF I/O window!\n");
+		return -ENOMEM;
+	}
+
+	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+	cf_ide_resources[0].start += (unsigned long)cf_ide_base;
+	cf_ide_resources[0].end   += (unsigned long)cf_ide_base;
+	cf_ide_resources[1].start += (unsigned long)cf_ide_base;
+	cf_ide_resources[1].end   += (unsigned long)cf_ide_base;
+
 	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
 }
 __initcall(sh03_devices_setup);
@@ -70,6 +102,5 @@ static struct sh_machine_vector mv_sh03 __initmv = {
 	.mv_name		= "Interface (CTP/PCI-SH03)",
 	.mv_setup		= sh03_setup,
 	.mv_nr_irqs		= 48,
-	.mv_ioport_map		= sh03_ioport_map,
 	.mv_init_irq		= init_sh03_IRQ,
 };
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
index 538406872a8..986a0e71d22 100644
--- a/arch/sh/boards/mach-systemh/irq.c
+++ b/arch/sh/boards/mach-systemh/irq.c
@@ -12,8 +12,8 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/systemh7751.h>
 #include <asm/smc37c93x.h>
 
@@ -24,35 +24,17 @@ static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
 static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
 
 /* forward declaration */
-static unsigned int startup_systemh_irq(unsigned int irq);
-static void shutdown_systemh_irq(unsigned int irq);
 static void enable_systemh_irq(unsigned int irq);
 static void disable_systemh_irq(unsigned int irq);
 static void mask_and_ack_systemh(unsigned int);
-static void end_systemh_irq(unsigned int irq);
 
-/* hw_interrupt_type */
-static struct hw_interrupt_type systemh_irq_type = {
-	.typename = " SystemH Register",
-	.startup = startup_systemh_irq,
-	.shutdown = shutdown_systemh_irq,
-	.enable = enable_systemh_irq,
-	.disable = disable_systemh_irq,
+static struct irq_chip systemh_irq_type = {
+	.name = " SystemH Register",
+	.unmask = enable_systemh_irq,
+	.mask = disable_systemh_irq,
 	.ack = mask_and_ack_systemh,
-	.end = end_systemh_irq
 };
 
-static unsigned int startup_systemh_irq(unsigned int irq)
-{
-	enable_systemh_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_systemh_irq(unsigned int irq)
-{
-	disable_systemh_irq(irq);
-}
-
 static void disable_systemh_irq(unsigned int irq)
 {
 	if (systemh_irq_mask_register) {
@@ -86,16 +68,9 @@ static void mask_and_ack_systemh(unsigned int irq)
 	disable_systemh_irq(irq);
 }
 
-static void end_systemh_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_systemh_irq(irq);
-}
-
 void make_systemh_irq(unsigned int irq)
 {
 	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &systemh_irq_type;
+	set_irq_chip_and_handler(irq, &systemh_irq_type, handle_level_irq);
 	disable_systemh_irq(irq);
 }
-