aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/io_apic_32.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-07-21 10:34:25 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-07-21 10:34:25 -0700
commit72a73693aac5ae82850cedc69fa5d264ca977c13 (patch)
tree80ab4bad93a2204ff264c0b07b63449a91410585 /arch/x86/kernel/io_apic_32.c
parentb7e6f62fe259187f2578d00960ef1b0e6ff6afd5 (diff)
parent2e2dcc7631e331cf2e8396ce452e7f01e35f1182 (diff)
Merge branch 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (160 commits) x86: remove extra calling to get ext cpuid level x86: use setup_clear_cpu_cap() when disabling the lapic KVM: fix exception entry / build bug, on 64-bit x86: add unknown_nmi_panic kernel parameter x86, VisWS: turn into generic arch, eliminate leftover files x86: add ->pre_time_init to x86_quirks x86: extend and use x86_quirks to clean up NUMAQ code x86: introduce x86_quirks x86: improve debug printout: add target bootmem range in early_res_to_bootmem() Subject: devmem, x86: fix rename of CONFIG_NONPROMISC_DEVMEM x86: remove arch_get_ram_range x86: Add a debugfs interface to dump PAT memtype x86: Add a arch directory for x86 under debugfs x86: i386: reduce boot fixmap space i386/xen: add proper unwind annotations to xen_sysenter_target x86: reduce force_mwait visibility x86: reduce forbid_dac's visibility x86: fix two modpost warnings x86: check function status in EDD boot code x86_64: ia32_signal.c: remove signal number conversion ...
Diffstat (limited to 'arch/x86/kernel/io_apic_32.c')
-rw-r--r--arch/x86/kernel/io_apic_32.c53
1 files changed, 29 insertions, 24 deletions
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 558abf4c796..de9aa0e3a9c 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -756,7 +756,7 @@ void send_IPI_self(int vector)
/*
* Send the IPI. The write to APIC_ICR fires this off.
*/
- apic_write_around(APIC_ICR, cfg);
+ apic_write(APIC_ICR, cfg);
}
#endif /* !CONFIG_SMP */
@@ -2030,7 +2030,7 @@ static void mask_lapic_irq(unsigned int irq)
unsigned long v;
v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
}
static void unmask_lapic_irq(unsigned int irq)
@@ -2038,7 +2038,7 @@ static void unmask_lapic_irq(unsigned int irq)
unsigned long v;
v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+ apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
}
static struct irq_chip lapic_chip __read_mostly = {
@@ -2168,7 +2168,7 @@ static inline void __init check_timer(void)
* The AEOI mode will finish them in the 8259A
* automatically.
*/
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
@@ -2177,8 +2177,9 @@ static inline void __init check_timer(void)
pin2 = ioapic_i8259.pin;
apic2 = ioapic_i8259.apic;
- printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
- vector, apic1, pin1, apic2, pin2);
+ apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+ "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+ vector, apic1, pin1, apic2, pin2);
/*
* Some BIOS writers are clueless and report the ExtINTA
@@ -2216,12 +2217,13 @@ static inline void __init check_timer(void)
}
clear_IO_APIC_pin(apic1, pin1);
if (!no_pin1)
- printk(KERN_ERR "..MP-BIOS bug: "
- "8254 timer not connected to IO-APIC\n");
+ apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
+ "8254 timer not connected to IO-APIC\n");
- printk(KERN_INFO "...trying to set up timer (IRQ0) "
- "through the 8259A ... ");
- printk("\n..... (found pin %d) ...", pin2);
+ apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+ "(IRQ0) through the 8259A ...\n");
+ apic_printk(APIC_QUIET, KERN_INFO
+ "..... (found apic %d pin %d) ...\n", apic2, pin2);
/*
* legacy devices should be connected to IO APIC #0
*/
@@ -2230,7 +2232,7 @@ static inline void __init check_timer(void)
unmask_IO_APIC_irq(0);
enable_8259A_irq(0);
if (timer_irq_works()) {
- printk("works.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
timer_through_8259 = 1;
if (nmi_watchdog == NMI_IO_APIC) {
disable_8259A_irq(0);
@@ -2244,44 +2246,47 @@ static inline void __init check_timer(void)
*/
disable_8259A_irq(0);
clear_IO_APIC_pin(apic2, pin2);
- printk(" failed.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
}
if (nmi_watchdog == NMI_IO_APIC) {
- printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
+ apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+ "through the IO-APIC - disabling NMI Watchdog!\n");
nmi_watchdog = NMI_NONE;
}
timer_ack = 0;
- printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+ apic_printk(APIC_QUIET, KERN_INFO
+ "...trying to set up timer as Virtual Wire IRQ...\n");
lapic_register_intr(0, vector);
- apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
+ apic_write(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
enable_8259A_irq(0);
if (timer_irq_works()) {
- printk(" works.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
goto out;
}
disable_8259A_irq(0);
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
- printk(" failed.\n");
+ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+ apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
- printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+ apic_printk(APIC_QUIET, KERN_INFO
+ "...trying to set up timer as ExtINT IRQ...\n");
init_8259A(0);
make_8259A_irq(0);
- apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+ apic_write(APIC_LVT0, APIC_DM_EXTINT);
unlock_ExtINT_logic();
if (timer_irq_works()) {
- printk(" works.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
goto out;
}
- printk(" failed :(.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
- "report. Then try booting with the 'noapic' option");
+ "report. Then try booting with the 'noapic' option.\n");
out:
local_irq_restore(flags);
}