aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-09-14 17:48:14 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-09-14 17:48:14 -0700
commit2ca7d674d7ab2220707b2ada0b690c0e7c95e7ac (patch)
tree9c0927ed1d540e5fd704c1f82689870786514655 /arch
parent2195d2818c37bdf263865f1e9effccdd9fc5f9d4 (diff)
parent87d721ad7a37b7650dd710c88dd5c6a5bf9fe996 (diff)
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (257 commits) [ARM] Update mach-types ARM: 5636/1: Move vendor enum to AMBA include ARM: Fix pfn_valid() for sparse memory [ARM] orion5x: Add LaCie NAS 2Big Network support [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek board ARM: 5689/1: Update default config of HP Jornada 700-series machines ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem ARM: 5688/1: ks8695_serial: disable_irq() lockup ARM: 5687/1: fix an oops with highmem ARM: 5684/1: Add nuc960 platform to w90x900 ARM: 5683/1: Add nuc950 platform to w90x900 ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platform ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driver ARM: 5625/1: fix hard coded 4K resource size in amba bus detection MMC: MMCI: convert realview MMC to use gpiolib ARM: 5685/1: Make MMCI driver compile without gpiolib ARM: implement highpte ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ ... Fix up trivial conflict in arch/arm/kernel/signal.c. It was due to the TIF_NOTIFY_RESUME addition in commit d0420c83f ("KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures") and follow-ups.
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig264
-rw-r--r--arch/arm/Kconfig.debug1
-rw-r--r--arch/arm/Makefile17
-rw-r--r--arch/arm/boot/Makefile9
-rw-r--r--arch/arm/boot/compressed/head.S184
-rw-r--r--arch/arm/common/vic.c95
-rw-r--r--arch/arm/configs/bcmring_defconfig725
-rw-r--r--arch/arm/configs/cpu9260_defconfig1338
-rw-r--r--arch/arm/configs/cpu9g20_defconfig1328
-rw-r--r--arch/arm/configs/cpuat91_defconfig1316
-rw-r--r--arch/arm/configs/jornada720_defconfig329
-rw-r--r--arch/arm/configs/nhk8815_defconfig1316
-rw-r--r--arch/arm/configs/s5pc100_defconfig892
-rw-r--r--arch/arm/include/asm/assembler.h133
-rw-r--r--arch/arm/include/asm/elf.h3
-rw-r--r--arch/arm/include/asm/ftrace.h35
-rw-r--r--arch/arm/include/asm/futex.h1
-rw-r--r--arch/arm/include/asm/mach/mmc.h2
-rw-r--r--arch/arm/include/asm/memory.h23
-rw-r--r--arch/arm/include/asm/mmu_context.h2
-rw-r--r--arch/arm/include/asm/page-nommu.h3
-rw-r--r--arch/arm/include/asm/page.h4
-rw-r--r--arch/arm/include/asm/pgalloc.h16
-rw-r--r--arch/arm/include/asm/pgtable.h37
-rw-r--r--arch/arm/include/asm/ptrace.h8
-rw-r--r--arch/arm/include/asm/thread_info.h2
-rw-r--r--arch/arm/include/asm/uaccess.h7
-rw-r--r--arch/arm/include/asm/unified.h126
-rw-r--r--arch/arm/include/asm/unistd.h7
-rw-r--r--arch/arm/kernel/Makefile4
-rw-r--r--arch/arm/kernel/armksyms.c1
-rw-r--r--arch/arm/kernel/calls.S10
-rw-r--r--arch/arm/kernel/crunch.c13
-rw-r--r--arch/arm/kernel/entry-armv.S179
-rw-r--r--arch/arm/kernel/entry-common.S57
-rw-r--r--arch/arm/kernel/entry-header.S92
-rw-r--r--arch/arm/kernel/head-common.S15
-rw-r--r--arch/arm/kernel/head-nommu.S16
-rw-r--r--arch/arm/kernel/head.S28
-rw-r--r--arch/arm/kernel/irq.c2
-rw-r--r--arch/arm/kernel/module.c53
-rw-r--r--arch/arm/kernel/process.c2
-rw-r--r--arch/arm/kernel/ptrace.c8
-rw-r--r--arch/arm/kernel/return_address.c71
-rw-r--r--arch/arm/kernel/setup.c28
-rw-r--r--arch/arm/kernel/signal.c86
-rw-r--r--arch/arm/kernel/stacktrace.c4
-rw-r--r--arch/arm/kernel/unwind.c4
-rw-r--r--arch/arm/lib/ashldi3.S4
-rw-r--r--arch/arm/lib/ashrdi3.S4
-rw-r--r--arch/arm/lib/backtrace.S8
-rw-r--r--arch/arm/lib/bitops.h2
-rw-r--r--arch/arm/lib/clear_user.S15
-rw-r--r--arch/arm/lib/copy_from_user.S19
-rw-r--r--arch/arm/lib/copy_template.S24
-rw-r--r--arch/arm/lib/copy_to_user.S19
-rw-r--r--arch/arm/lib/csumpartialcopyuser.S48
-rw-r--r--arch/arm/lib/div64.S4
-rw-r--r--arch/arm/lib/findbit.S34
-rw-r--r--arch/arm/lib/getuser.S5
-rw-r--r--arch/arm/lib/io-writesw-armv4.S5
-rw-r--r--arch/arm/lib/lshrdi3.S4
-rw-r--r--arch/arm/lib/memcpy.S7
-rw-r--r--arch/arm/lib/memmove.S28
-rw-r--r--arch/arm/lib/putuser.S15
-rw-r--r--arch/arm/lib/sha1.S2
-rw-r--r--arch/arm/lib/strncpy_from_user.S2
-rw-r--r--arch/arm/lib/strnlen_user.S2
-rw-r--r--arch/arm/mach-at91/Kconfig70
-rw-r--r--arch/arm/mach-at91/Makefile9
-rw-r--r--arch/arm/mach-at91/Makefile.boot4
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c116
-rw-r--r--arch/arm/mach-at91/at91sam9261.c22
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c14
-rw-r--r--arch/arm/mach-at91/at91sam9g45.c360
-rw-r--r--arch/arm/mach-at91/at91sam9g45_devices.c1230
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c12
-rw-r--r--arch/arm/mach-at91/board-cpu9krea.c385
-rw-r--r--arch/arm/mach-at91/board-cpuat91.c185
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c14
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c4
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c1
-rw-r--r--arch/arm/mach-at91/board-sam9m10g45ek.c389
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c79
-rw-r--r--arch/arm/mach-at91/clock.c66
-rw-r--r--arch/arm/mach-at91/generic.h2
-rw-r--r--arch/arm/mach-at91/gpio.c15
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9261.h3
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9g45.h155
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h153
-rw-r--r--arch/arm/mach-at91/include/mach/board.h14
-rw-r--r--arch/arm/mach-at91/include/mach/cpu.h23
-rw-r--r--arch/arm/mach-at91/include/mach/hardware.h4
-rw-r--r--arch/arm/mach-at91/include/mach/timex.h10
-rw-r--r--arch/arm/mach-at91/pm.c3
-rw-r--r--arch/arm/mach-bcmring/Kconfig21
-rw-r--r--arch/arm/mach-bcmring/Makefile8
-rw-r--r--arch/arm/mach-bcmring/Makefile.boot6
-rw-r--r--arch/arm/mach-bcmring/arch.c157
-rw-r--r--arch/arm/mach-bcmring/clock.c224
-rw-r--r--arch/arm/mach-bcmring/clock.h33
-rw-r--r--arch/arm/mach-bcmring/core.c367
-rw-r--r--arch/arm/mach-bcmring/core.h30
-rw-r--r--arch/arm/mach-bcmring/csp/Makefile3
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/Makefile1
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/chipcHw.c776
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c293
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c124
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c64
-rw-r--r--arch/arm/mach-bcmring/csp/dmac/Makefile1
-rw-r--r--arch/arm/mach-bcmring/csp/dmac/dmacHw.c917
-rw-r--r--arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c1017
-rw-r--r--arch/arm/mach-bcmring/csp/tmr/Makefile1
-rw-r--r--arch/arm/mach-bcmring/csp/tmr/tmrHw.c576
-rw-r--r--arch/arm/mach-bcmring/dma.c2321
-rw-r--r--arch/arm/mach-bcmring/dma_device.c593
-rw-r--r--arch/arm/mach-bcmring/include/cfg_global.h13
-rw-r--r--arch/arm/mach-bcmring/include/cfg_global_defines.h40
-rw-r--r--arch/arm/mach-bcmring/include/csp/cache.h35
-rw-r--r--arch/arm/mach-bcmring/include/csp/delay.h36
-rw-r--r--arch/arm/mach-bcmring/include/csp/dmacHw.h596
-rw-r--r--arch/arm/mach-bcmring/include/csp/errno.h32
-rw-r--r--arch/arm/mach-bcmring/include/csp/intcHw.h40
-rw-r--r--arch/arm/mach-bcmring/include/csp/module.h32
-rw-r--r--arch/arm/mach-bcmring/include/csp/reg.h114
-rw-r--r--arch/arm/mach-bcmring/include/csp/secHw.h65
-rw-r--r--arch/arm/mach-bcmring/include/csp/stdint.h30
-rw-r--r--arch/arm/mach-bcmring/include/csp/string.h34
-rw-r--r--arch/arm/mach-bcmring/include/csp/tmrHw.h263
-rw-r--r--arch/arm/mach-bcmring/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/cap.h63
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/cap_inline.h409
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h1123
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h1673
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h530
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h872
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h145
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h406
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h73
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h246
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/mm_addr.h101
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/mm_io.h147
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/secHw_def.h100
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h79
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h82
-rw-r--r--arch/arm/mach-bcmring/include/mach/dma.h826
-rw-r--r--arch/arm/mach-bcmring/include/mach/entry-macro.S86
-rw-r--r--arch/arm/mach-bcmring/include/mach/hardware.h60
-rw-r--r--arch/arm/mach-bcmring/include/mach/io.h56
-rw-r--r--arch/arm/mach-bcmring/include/mach/irqs.h132
-rw-r--r--arch/arm/mach-bcmring/include/mach/memory.h33
-rw-r--r--arch/arm/mach-bcmring/include/mach/memory_settings.h67
-rw-r--r--arch/arm/mach-bcmring/include/mach/system.h54
-rw-r--r--arch/arm/mach-bcmring/include/mach/timer.h77
-rw-r--r--arch/arm/mach-bcmring/include/mach/timex.h25
-rw-r--r--arch/arm/mach-bcmring/include/mach/uncompress.h43
-rw-r--r--arch/arm/mach-bcmring/include/mach/vmalloc.h25
-rw-r--r--arch/arm/mach-bcmring/irq.c127
-rw-r--r--arch/arm/mach-bcmring/mm.c56
-rw-r--r--arch/arm/mach-bcmring/timer.c62
-rw-r--r--arch/arm/mach-ep93xx/adssphere.c11
-rw-r--r--arch/arm/mach-ep93xx/clock.c131
-rw-r--r--arch/arm/mach-ep93xx/core.c202
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c10
-rw-r--r--arch/arm/mach-ep93xx/gesbc9312.c11
-rw-r--r--arch/arm/mach-ep93xx/gpio.c65
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h103
-rw-r--r--arch/arm/mach-ep93xx/include/mach/hardware.h17
-rw-r--r--arch/arm/mach-ep93xx/include/mach/io.h17
-rw-r--r--arch/arm/mach-ep93xx/include/mach/platform.h20
-rw-r--r--arch/arm/mach-ep93xx/include/mach/system.h12
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ts72xx.h1
-rw-r--r--arch/arm/mach-ep93xx/micro9.c11
-rw-r--r--arch/arm/mach-ep93xx/ts72xx.c15
-rw-r--r--arch/arm/mach-integrator/include/mach/hardware.h4
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c18
-rw-r--r--arch/arm/mach-kirkwood/Kconfig6
-rw-r--r--arch/arm/mach-kirkwood/Makefile1
-rw-r--r--arch/arm/mach-kirkwood/common.c5
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kirkwood.h1
-rw-r--r--arch/arm/mach-kirkwood/openrd_base-setup.c84
-rw-r--r--arch/arm/mach-mx1/clock.c86
-rw-r--r--arch/arm/mach-mx1/devices.c87
-rw-r--r--arch/arm/mach-mx1/generic.c7
-rw-r--r--arch/arm/mach-mx1/mx1ads.c10
-rw-r--r--arch/arm/mach-mx1/scb9328.c16
-rw-r--r--arch/arm/mach-mx2/Kconfig35
-rw-r--r--arch/arm/mach-mx2/Makefile3
-rw-r--r--arch/arm/mach-mx2/clock_imx21.c2
-rw-r--r--arch/arm/mach-mx2/clock_imx27.c11
-rw-r--r--arch/arm/mach-mx2/devices.c332
-rw-r--r--arch/arm/mach-mx2/devices.h9
-rw-r--r--arch/arm/mach-mx2/eukrea_cpuimx27.c234
-rw-r--r--arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c249
-rw-r--r--arch/arm/mach-mx2/generic.c12
-rw-r--r--arch/arm/mach-mx2/mx21ads.c44
-rw-r--r--arch/arm/mach-mx2/mx27ads.c38
-rw-r--r--arch/arm/mach-mx2/mx27lite.c2
-rw-r--r--arch/arm/mach-mx2/mx27pdk.c2
-rw-r--r--arch/arm/mach-mx2/pca100.c244
-rw-r--r--arch/arm/mach-mx2/pcm038.c17
-rw-r--r--arch/arm/mach-mx2/pcm970-baseboard.c112
-rw-r--r--arch/arm/mach-mx25/Kconfig9
-rw-r--r--arch/arm/mach-mx25/Makefile3
-rw-r--r--arch/arm/mach-mx25/Makefile.boot3
-rw-r--r--arch/arm/mach-mx25/clock.c219
-rw-r--r--arch/arm/mach-mx25/devices.c402
-rw-r--r--arch/arm/mach-mx25/devices.h19
-rw-r--r--arch/arm/mach-mx25/mm.c76
-rw-r--r--arch/arm/mach-mx25/mx25pdk.c58
-rw-r--r--arch/arm/mach-mx3/armadillo5x0.c2
-rw-r--r--arch/arm/mach-mx3/clock-imx35.c22
-rw-r--r--arch/arm/mach-mx3/clock.c22
-rw-r--r--arch/arm/mach-mx3/devices.c163
-rw-r--r--arch/arm/mach-mx3/devices.h6
-rw-r--r--arch/arm/mach-mx3/mm.c14
-rw-r--r--arch/arm/mach-mx3/mx31ads.c2
-rw-r--r--arch/arm/mach-mx3/mx31lilly.c2
-rw-r--r--arch/arm/mach-mx3/mx31lite.c7
-rw-r--r--arch/arm/mach-mx3/mx31moboard-devboard.c43
-rw-r--r--arch/arm/mach-mx3/mx31moboard-marxbot.c55
-rw-r--r--arch/arm/mach-mx3/mx31moboard.c134
-rw-r--r--arch/arm/mach-mx3/mx31pdk.c2
-rw-r--r--arch/arm/mach-mx3/mx35pdk.c2
-rw-r--r--arch/arm/mach-mx3/pcm037.c42
-rw-r--r--arch/arm/mach-mx3/pcm043.c8
-rw-r--r--arch/arm/mach-mx3/qong.c7
-rw-r--r--arch/arm/mach-mxc91231/Kconfig11
-rw-r--r--arch/arm/mach-mxc91231/Makefile2
-rw-r--r--arch/arm/mach-mxc91231/Makefile.boot3
-rw-r--r--arch/arm/mach-mxc91231/clock.c642
-rw-r--r--arch/arm/mach-mxc91231/crm_regs.h399
-rw-r--r--arch/arm/mach-mxc91231/devices.c251
-rw-r--r--arch/arm/mach-mxc91231/devices.h13
-rw-r--r--arch/arm/mach-mxc91231/iomux.c177
-rw-r--r--arch/arm/mach-mxc91231/magx-zn5.c63
-rw-r--r--arch/arm/mach-mxc91231/mm.c94
-rw-r--r--arch/arm/mach-mxc91231/system.c51
-rw-r--r--arch/arm/mach-netx/include/mach/entry-macro.S4
-rw-r--r--arch/arm/mach-nomadik/Kconfig21
-rw-r--r--arch/arm/mach-nomadik/Makefile19
-rw-r--r--arch/arm/mach-nomadik/Makefile.boot4
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c111
-rw-r--r--arch/arm/mach-nomadik/clock.c45
-rw-r--r--arch/arm/mach-nomadik/clock.h14
-rw-r--r--arch/arm/mach-nomadik/cpu-8815.c139
-rw-r--r--arch/arm/mach-nomadik/gpio.c396
-rw-r--r--arch/arm/mach-nomadik/i2c-8815nhk.c65
-rw-r--r--arch/arm/mach-nomadik/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-nomadik/include/mach/debug-macro.S22
-rw-r--r--arch/arm/mach-nomadik/include/mach/entry-macro.S43
-rw-r--r--arch/arm/mach-nomadik/include/mach/gpio.h71
-rw-r--r--arch/arm/mach-nomadik/include/mach/hardware.h90
-rw-r--r--arch/arm/mach-nomadik/include/mach/io.h22
-rw-r--r--arch/arm/mach-nomadik/include/mach/irqs.h82
-rw-r--r--arch/arm/mach-nomadik/include/mach/memory.h28
-rw-r--r--arch/arm/mach-nomadik/include/mach/mtu.h45
-rw-r--r--arch/arm/mach-nomadik/include/mach/setup.h22
-rw-r--r--arch/arm/mach-nomadik/include/mach/system.h45
-rw-r--r--arch/arm/mach-nomadik/include/mach/timex.h6
-rw-r--r--arch/arm/mach-nomadik/include/mach/uncompress.h63
-rw-r--r--arch/arm/mach-nomadik/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-nomadik/timer.c164
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c2
-rw-r--r--arch/arm/mach-omap2/mcbsp.c41
-rw-r--r--arch/arm/mach-omap2/serial.c10
-rw-r--r--arch/arm/mach-orion5x/Kconfig21
-rw-r--r--arch/arm/mach-orion5x/Makefile3
-rw-r--r--arch/arm/mach-orion5x/addr-map.c3
-rw-r--r--arch/arm/mach-orion5x/d2net-setup.c365
-rw-r--r--arch/arm/mach-orion5x/net2big-setup.c431
-rw-r--r--arch/arm/mach-pxa/sharpsl_pm.c4
-rw-r--r--arch/arm/mach-realview/Kconfig2
-rw-r--r--arch/arm/mach-realview/core.c7
-rw-r--r--arch/arm/mach-realview/include/mach/gpio.h6
-rw-r--r--arch/arm/mach-realview/include/mach/hardware.h4
-rw-r--r--arch/arm/mach-realview/platsmp.c18
-rw-r--r--arch/arm/mach-realview/realview_eb.c22
-rw-r--r--arch/arm/mach-realview/realview_pb1176.c22
-rw-r--r--arch/arm/mach-realview/realview_pb11mp.c22
-rw-r--r--arch/arm/mach-realview/realview_pba8.c22
-rw-r--r--arch/arm/mach-realview/realview_pbx.c22
-rw-r--r--arch/arm/mach-s3c2410/Kconfig18
-rw-r--r--arch/arm/mach-s3c2410/Makefile2
-rw-r--r--arch/arm/mach-s3c2410/cpu-freq.c159
-rw-r--r--arch/arm/mach-s3c2410/dma.c11
-rw-r--r--arch/arm/mach-s3c2410/include/mach/irqs.h6
-rw-r--r--arch/arm/mach-s3c2410/include/mach/map.h8
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-gpio.h4
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-mem.h10
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h23
-rw-r--r--arch/arm/mach-s3c2410/include/mach/spi.h3
-rw-r--r--arch/arm/mach-s3c2410/irq.c15
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c41
-rw-r--r--arch/arm/mach-s3c2410/pll.c95
-rw-r--r--arch/arm/mach-s3c2410/pm.c12
-rw-r--r--arch/arm/mach-s3c2410/s3c2410.c29
-rw-r--r--arch/arm/mach-s3c2412/Kconfig9
-rw-r--r--arch/arm/mach-s3c2412/Makefile1
-rw-r--r--arch/arm/mach-s3c2412/cpu-freq.c257
-rw-r--r--arch/arm/mach-s3c2412/s3c2412.c12
-rw-r--r--arch/arm/mach-s3c2440/Kconfig7
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c9
-rw-r--r--arch/arm/mach-s3c24a0/include/mach/map.h1
-rw-r--r--arch/arm/mach-s3c6400/include/mach/map.h8
-rw-r--r--arch/arm/mach-s3c6400/s3c6400.c2
-rw-r--r--arch/arm/mach-s3c6410/Kconfig10
-rw-r--r--arch/arm/mach-s3c6410/Makefile3
-rw-r--r--arch/arm/mach-s3c6410/cpu.c2
-rw-r--r--arch/arm/mach-s3c6410/mach-hmt.c276
-rw-r--r--arch/arm/mach-s3c6410/mach-ncp.c2
-rw-r--r--arch/arm/mach-s3c6410/mach-smdk6410.c26
-rw-r--r--arch/arm/mach-s5pc100/Kconfig22
-rw-r--r--arch/arm/mach-s5pc100/Makefile17
-rw-r--r--arch/arm/mach-s5pc100/Makefile.boot2
-rw-r--r--arch/arm/mach-s5pc100/cpu.c97
-rw-r--r--arch/arm/mach-s5pc100/include/mach/debug-macro.S38
-rw-r--r--arch/arm/mach-s5pc100/include/mach/entry-macro.S50
-rw-r--r--arch/arm/mach-s5pc100/include/mach/gpio-core.h21
-rw-r--r--arch/arm/mach-s5pc100/include/mach/gpio.h146
-rw-r--r--arch/arm/mach-s5pc100/include/mach/hardware.h14
-rw-r--r--arch/arm/mach-s5pc100/include/mach/irqs.h14
-rw-r--r--arch/arm/mach-s5pc100/include/mach/map.h75
-rw-r--r--arch/arm/mach-s5pc100/include/mach/memory.h18
-rw-r--r--arch/arm/mach-s5pc100/include/mach/pwm-clock.h56
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-irq.h24
-rw-r--r--arch/arm/mach-s5pc100/include/mach/system.h24
-rw-r--r--arch/arm/mach-s5pc100/include/mach/tick.h29
-rw-r--r--arch/arm/mach-s5pc100/include/mach/uncompress.h28
-rw-r--r--arch/arm/mach-s5pc100/mach-smdkc100.c103
-rw-r--r--arch/arm/mach-u300/mmc.c2
-rw-r--r--arch/arm/mach-versatile/core.c17
-rw-r--r--arch/arm/mach-versatile/include/mach/gpio.h6
-rw-r--r--arch/arm/mach-versatile/include/mach/irqs.h11
-rw-r--r--arch/arm/mach-versatile/versatile_pb.c17
-rw-r--r--arch/arm/mach-w90x900/Kconfig30
-rw-r--r--arch/arm/mach-w90x900/Makefile12
-rw-r--r--arch/arm/mach-w90x900/clksel.c91
-rw-r--r--arch/arm/mach-w90x900/clock.c26
-rw-r--r--arch/arm/mach-w90x900/clock.h12
-rw-r--r--arch/arm/mach-w90x900/cpu.c212
-rw-r--r--arch/arm/mach-w90x900/cpu.h49
-rw-r--r--arch/arm/mach-w90x900/dev.c389
-rw-r--r--arch/arm/mach-w90x900/gpio.c78
-rw-r--r--arch/arm/mach-w90x900/include/mach/regs-clock.h22
-rw-r--r--arch/arm/mach-w90x900/include/mach/regs-ebi.h33
-rw-r--r--arch/arm/mach-w90x900/irq.c172
-rw-r--r--arch/arm/mach-w90x900/mach-nuc910evb.c44
-rw-r--r--arch/arm/mach-w90x900/mach-nuc950evb.c44
-rw-r--r--arch/arm/mach-w90x900/mach-nuc960evb.c44
-rw-r--r--arch/arm/mach-w90x900/mach-w90p910evb.c267
-rw-r--r--arch/arm/mach-w90x900/mfp-w90p910.c116
-rw-r--r--arch/arm/mach-w90x900/mfp.c158
-rw-r--r--arch/arm/mach-w90x900/nuc910.c60
-rw-r--r--arch/arm/mach-w90x900/nuc910.h28
-rw-r--r--arch/arm/mach-w90x900/nuc950.c54
-rw-r--r--arch/arm/mach-w90x900/nuc950.h28
-rw-r--r--arch/arm/mach-w90x900/nuc960.c54
-rw-r--r--arch/arm/mach-w90x900/nuc960.h28
-rw-r--r--arch/arm/mach-w90x900/time.c153
-rw-r--r--arch/arm/mach-w90x900/w90p910.c136
-rw-r--r--arch/arm/mm/Kconfig2
-rw-r--r--arch/arm/mm/alignment.c20
-rw-r--r--arch/arm/mm/cache-v7.S16
-rw-r--r--arch/arm/mm/dma-mapping.c94
-rw-r--r--arch/arm/mm/fault.c24
-rw-r--r--arch/arm/mm/flush.c9
-rw-r--r--arch/arm/mm/highmem.c8
-rw-r--r--arch/arm/mm/init.c32
-rw-r--r--arch/arm/mm/nommu.c1
-rw-r--r--arch/arm/mm/proc-macros.S8
-rw-r--r--arch/arm/mm/proc-v7.S7
-rw-r--r--arch/arm/plat-mxc/Kconfig17
-rw-r--r--arch/arm/plat-mxc/clock.c170
-rw-r--r--arch/arm/plat-mxc/gpio.c42
-rw-r--r--arch/arm/plat-mxc/include/mach/board-armadillo5x0.h7
-rw-r--r--arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h40
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx21ads.h6
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx27ads.h6
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx27lite.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx27pdk.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31ads.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31lilly.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31lite.h3
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31moboard.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31pdk.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx35pdk.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/board-pcm037.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/board-pcm038.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/board-pcm043.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/board-qong.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/common.h19
-rw-r--r--arch/arm/plat-mxc/include/mach/debug-macro.S68
-rw-r--r--arch/arm/plat-mxc/include/mach/entry-macro.S3
-rw-r--r--arch/arm/plat-mxc/include/mach/hardware.h8
-rw-r--r--arch/arm/plat-mxc/include/mach/imxfb.h29
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx25.h517
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx3.h25
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mxc91231.h287
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-v3.h35
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux.h6
-rw-r--r--arch/arm/plat-mxc/include/mach/irqs.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/memory.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/mx1.h22
-rw-r--r--arch/arm/plat-mxc/include/mach/mx21.h5
-rw-r--r--arch/arm/plat-mxc/include/mach/mx25.h44
-rw-r--r--arch/arm/plat-mxc/include/mach/mx27.h7
-rw-r--r--arch/arm/plat-mxc/include/mach/mx2x.h18
-rw-r--r--arch/arm/plat-mxc/include/mach/mx31.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/mx35.h1
-rw-r--r--arch/arm/plat-mxc/include/mach/mx3x.h21
-rw-r--r--arch/arm/plat-mxc/include/mach/mxc.h28
-rw-r--r--arch/arm/plat-mxc/include/mach/mxc91231.h315
-rw-r--r--arch/arm/plat-mxc/include/mach/system.h10
-rw-r--r--arch/arm/plat-mxc/include/mach/timex.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/uncompress.h68
-rw-r--r--arch/arm/plat-mxc/iomux-v3.c15
-rw-r--r--arch/arm/plat-mxc/irq.c6
-rw-r--r--arch/arm/plat-mxc/pwm.c19
-rw-r--r--arch/arm/plat-mxc/system.c29
-rw-r--r--arch/arm/plat-mxc/time.c39
-rw-r--r--arch/arm/plat-omap/gpio.c249
-rw-r--r--arch/arm/plat-omap/include/mach/dma.h88
-rw-r--r--arch/arm/plat-omap/include/mach/mcbsp.h8
-rw-r--r--arch/arm/plat-omap/mcbsp.c2
-rw-r--r--arch/arm/plat-s3c/Kconfig5
-rw-r--r--arch/arm/plat-s3c/Makefile6
-rw-r--r--arch/arm/plat-s3c/dev-nand.c30
-rw-r--r--arch/arm/plat-s3c/include/plat/adc.h8
-rw-r--r--arch/arm/plat-s3c/include/plat/cpu-freq.h87
-rw-r--r--arch/arm/plat-s3c/include/plat/cpu.h1
-rw-r--r--arch/arm/plat-s3c/include/plat/devs.h3
-rw-r--r--arch/arm/plat-s3c/include/plat/hwmon.h41
-rw-r--r--arch/arm/plat-s3c/include/plat/map-base.h8
-rw-r--r--arch/arm/plat-s3c/pwm.c (renamed from arch/arm/plat-s3c24xx/pwm.c)5
-rw-r--r--arch/arm/plat-s3c24xx/Kconfig66
-rw-r--r--arch/arm/plat-s3c24xx/Makefile12
-rw-r--r--arch/arm/plat-s3c24xx/adc.c64
-rw-r--r--arch/arm/plat-s3c24xx/cpu-freq-debugfs.c199
-rw-r--r--arch/arm/plat-s3c24xx/cpu-freq.c716
-rw-r--r--arch/arm/plat-s3c24xx/cpu.c2
-rw-r--r--arch/arm/plat-s3c24xx/devs.c71
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h282
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/fiq.h13
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/s3c2410.h1
-rw-r--r--arch/arm/plat-s3c24xx/irq.c36
-rw-r--r--arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c64
-rw-r--r--arch/arm/plat-s3c24xx/s3c2410-iotiming.c477
-rw-r--r--arch/arm/plat-s3c24xx/s3c2412-iotiming.c285
-rw-r--r--arch/arm/plat-s3c24xx/s3c2440-cpufreq.c311
-rw-r--r--arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c97
-rw-r--r--arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c127
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c38
-rw-r--r--arch/arm/plat-s3c64xx/Kconfig1
-rw-r--r--arch/arm/plat-s3c64xx/Makefile3
-rw-r--r--arch/arm/plat-s3c64xx/dev-audio.c (renamed from arch/arm/plat-s3c/dev-audio.c)0
-rw-r--r--arch/arm/plat-s5pc1xx/Kconfig50
-rw-r--r--arch/arm/plat-s5pc1xx/Makefile26
-rw-r--r--arch/arm/plat-s5pc1xx/cpu.c112
-rw-r--r--arch/arm/plat-s5pc1xx/dev-uart.c174
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/irqs.h182
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/pll.h38
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/regs-clock.h421
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/s5pc100.h65
-rw-r--r--arch/arm/plat-s5pc1xx/irq.c259
-rw-r--r--arch/arm/plat-s5pc1xx/s5pc100-clock.c1139
-rw-r--r--arch/arm/plat-s5pc1xx/s5pc100-init.c27
-rw-r--r--arch/arm/plat-s5pc1xx/setup-i2c0.c25
-rw-r--r--arch/arm/plat-s5pc1xx/setup-i2c1.c25
-rw-r--r--arch/arm/tools/mach-types139
-rw-r--r--arch/arm/vfp/entry.S2
-rw-r--r--arch/arm/vfp/vfphw.S48
472 files changed, 46967 insertions, 2647 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..d778a699f57 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,10 +46,6 @@ config GENERIC_CLOCKEVENTS_BROADCAST
depends on GENERIC_CLOCKEVENTS
default y if SMP && !LOCAL_TIMERS
-config MMU
- bool
- default y
-
config NO_IOPORT
bool
@@ -126,6 +122,13 @@ config ARCH_HAS_ILOG2_U32
config ARCH_HAS_ILOG2_U64
bool
+config ARCH_HAS_CPUFREQ
+ bool
+ help
+ Internal node to signify that the ARCH has CPUFREQ support
+ and that the relevant menu configurations are displayed for
+ it.
+
config GENERIC_HWEIGHT
bool
default y
@@ -188,6 +191,13 @@ source "kernel/Kconfig.freezer"
menu "System Type"
+config MMU
+ bool "MMU-based Paged Memory Management Support"
+ default y
+ help
+ Select if you want MMU-based virtualised addressing space
+ support by paged memory management. If unsure, say 'Y'.
+
choice
prompt "ARM system type"
default ARCH_VERSATILE
@@ -203,6 +213,7 @@ config ARCH_AAEC2000
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
+ select ARCH_HAS_CPUFREQ
select HAVE_CLK
select COMMON_CLKDEV
select ICST525
@@ -217,6 +228,7 @@ config ARCH_REALVIEW
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
help
This enables support for ARM Ltd RealView boards.
@@ -229,6 +241,7 @@ config ARCH_VERSATILE
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
help
This enables support for ARM Ltd Versatile board.
@@ -327,6 +340,20 @@ config ARCH_H720X
help
This enables support for systems based on the Hynix HMS720x
+config ARCH_NOMADIK
+ bool "STMicroelectronics Nomadik"
+ select ARM_AMBA
+ select ARM_VIC
+ select CPU_ARM926T
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for the Nomadik platform by ST-Ericsson
+
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
@@ -493,10 +520,18 @@ config ARCH_W90X900
select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
select GENERIC_GPIO
+ select HAVE_CLK
select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
- Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
- can login www.mcuos.com or www.nuvoton.com to know more.
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,
+ At present, the w90x900 has been renamed nuc900, regarding
+ the ARM series product line, you can login the following
+ link address to know more.
+
+ <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
+ ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
@@ -509,6 +544,7 @@ config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
select ARCH_MTD_XIP
+ select ARCH_HAS_CPUFREQ
select GENERIC_GPIO
select HAVE_CLK
select COMMON_CLKDEV
@@ -551,6 +587,7 @@ config ARCH_SA1100
select ISA
select ARCH_SPARSEMEM_ENABLE
select ARCH_MTD_XIP
+ select ARCH_HAS_CPUFREQ
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
@@ -563,6 +600,7 @@ config ARCH_SA1100
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
+ select ARCH_HAS_CPUFREQ
select HAVE_CLK
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -573,9 +611,18 @@ config ARCH_S3C64XX
bool "Samsung S3C64XX"
select GENERIC_GPIO
select HAVE_CLK
+ select ARCH_HAS_CPUFREQ
help
Samsung S3C64XX series based systems
+config ARCH_S5PC1XX
+ bool "Samsung S5PC1XX"
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select CPU_V7
+ help
+ Samsung S5PC1XX series based systems
+
config ARCH_SHARK
bool "Shark"
select CPU_SA110
@@ -632,11 +679,24 @@ config ARCH_OMAP
select GENERIC_GPIO
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_CPUFREQ
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
+config ARCH_BCMRING
+ bool "Broadcom BCMRING"
+ depends on MMU
+ select CPU_V6
+ select ARM_AMBA
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ help
+ Support for Broadcom's BCMRing platform.
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -685,6 +745,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c64xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
@@ -702,6 +763,10 @@ endif
source "arch/arm/plat-stmp3xxx/Kconfig"
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-h720x/Kconfig"
@@ -716,6 +781,8 @@ source "arch/arm/mach-at91/Kconfig"
source "arch/arm/plat-mxc/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-ns9xxx/Kconfig"
@@ -730,6 +797,8 @@ source "arch/arm/mach-u300/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
+source "arch/arm/mach-bcmring/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -962,18 +1031,7 @@ config LOCAL_TIMERS
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
-config PREEMPT
- bool "Preemptible Kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
-
- Say Y here if you are building a kernel for a desktop, embedded
- or real-time system. Say N if you are unsure.
+source kernel/Kconfig.preempt
config HZ
int
@@ -983,6 +1041,21 @@ config HZ
default AT91_TIMER_HZ if ARCH_AT91
default 100
+config THUMB2_KERNEL
+ bool "Compile the kernel in Thumb-2 mode"
+ depends on CPU_V7 && EXPERIMENTAL
+ select AEABI
+ select ARM_ASM_UNIFIED
+ help
+ By enabling this option, the kernel will be compiled in
+ Thumb-2 mode. A compiler/assembler that understand the unified
+ ARM-Thumb syntax is needed.
+
+ If unsure, say N.
+
+config ARM_ASM_UNIFIED
+ bool
+
config AEABI
bool "Use the ARM EABI to compile the kernel"
help
@@ -1054,6 +1127,11 @@ config HIGHMEM
If unsure, say n.
+config HIGHPTE
+ bool "Allocate 2nd-level pagetables from highmem"
+ depends on HIGHMEM
+ depends on !OUTER_CACHE
+
source "mm/Kconfig"
config LEDS
@@ -1241,7 +1319,7 @@ endmenu
menu "CPU Power Management"
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
@@ -1276,6 +1354,52 @@ config CPU_FREQ_S3C64XX
bool "CPUfreq support for Samsung S3C64XX CPUs"
depends on CPU_FREQ && CPU_S3C6410
+config CPU_FREQ_S3C
+ bool
+ help
+ Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+ bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+ depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+ select CPU_FREQ_S3C
+ help
+ This enables the CPUfreq driver for the Samsung S3C24XX family
+ of CPUs.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+ bool "Support CPUfreq changing of PLL frequency"
+ depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+ help
+ Compile in support for changing the PLL frequency from the
+ S3C24XX series CPUfreq driver. The PLL takes time to settle
+ after a frequency change, so by default it is not enabled.
+
+ This also means that the PLL tables for the selected CPU(s) will
+ be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+ bool "Debug CPUfreq Samsung driver core"
+ depends on CPU_FREQ_S3C24XX
+ help
+ Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+ bool "Debug CPUfreq Samsung driver IO timing"
+ depends on CPU_FREQ_S3C24XX
+ help
+ Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_DEBUGFS
+ bool "Export debugfs for CPUFreq"
+ depends on CPU_FREQ_S3C24XX && DEBUG_FS
+ help
+ Export status information via debugfs.
+
endif
source "drivers/cpuidle/Kconfig"
@@ -1377,107 +1501,7 @@ endmenu
source "net/Kconfig"
-menu "Device Drivers"
-
-source "drivers/base/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-if ALIGNMENT_TRAP || !CPU_CP15_MMU
-source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-
-source "drivers/misc/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ata/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-# input before char - char/joystick depends on it. As does USB.
-
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-source "drivers/i2c/Kconfig"
-
-source "drivers/spi/Kconfig"
-
-source "drivers/gpio/Kconfig"
-
-source "drivers/w1/Kconfig"
-
-source "drivers/power/Kconfig"
-
-source "drivers/hwmon/Kconfig"
-
-source "drivers/thermal/Kconfig"
-
-source "drivers/watchdog/Kconfig"
-
-source "drivers/ssb/Kconfig"
-
-#source "drivers/l3/Kconfig"
-
-source "drivers/mfd/Kconfig"
-
-source "drivers/media/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/hid/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/uwb/Kconfig"
-
-source "drivers/mmc/Kconfig"
-
-source "drivers/memstick/Kconfig"
-
-source "drivers/accessibility/Kconfig"
-
-source "drivers/leds/Kconfig"
-
-source "drivers/rtc/Kconfig"
-
-source "drivers/dma/Kconfig"
-
-source "drivers/dca/Kconfig"
-
-source "drivers/auxdisplay/Kconfig"
-
-source "drivers/regulator/Kconfig"
-
-source "drivers/uio/Kconfig"
-
-source "drivers/staging/Kconfig"
-
-endmenu
+source "drivers/Kconfig"
source "fs/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a89e4734b8f..1a6f70e5292 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -8,6 +8,7 @@ source "lib/Kconfig.debug"
# n, but then RMK will have to kill you ;).
config FRAME_POINTER
bool
+ depends on !THUMB2_KERNEL
default y if !ARM_UNWIND
help
If you say N here, the resulting kernel will be slightly smaller and
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..7350557a81e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -93,9 +93,16 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
CFLAGS_ABI +=-funwind-tables
endif
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
+CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+endif
+
# Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
+KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
CHECKFLAGS += -D__arm__
@@ -112,6 +119,7 @@ endif
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_DAVINCI) := davinci
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
@@ -135,8 +143,10 @@ machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_MX1) := mx1
machine-$(CONFIG_ARCH_MX2) := mx2
+machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_NETX) := netx
+machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
@@ -150,6 +160,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_STMP378X) := stmp378x
@@ -158,6 +169,7 @@ machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
+machine-$(CONFIG_ARCH_MXC91231) := mxc91231
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
@@ -168,6 +180,7 @@ plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index da226abce2d..4a590f4113e 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -61,7 +61,7 @@ endif
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
- -C none -a $(LOADADDR) -e $(LOADADDR) \
+ -C none -a $(LOADADDR) -e $(STARTADDR) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
ifeq ($(CONFIG_ZBOOT_ROM),y)
@@ -70,6 +70,13 @@ else
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
+$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
+else
+$(obj)/uImage: STARTADDR=$(LOADADDR)
+endif
+
$(obj)/uImage: $(obj)/zImage FORCE
$(call if_changed,uimage)
@echo ' Image $@ is ready'
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 4515728c534..fa6fbf45cf3 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -140,7 +140,8 @@ start:
tst r2, #3 @ not user?
bne not_angel
mov r0, #0x17 @ angel_SWIreason_EnterSVC
- swi 0x123456 @ angel_SWI_ARM
+ ARM( swi 0x123456 ) @ angel_SWI_ARM
+ THUMB( svc 0xab ) @ angel_SWI_THUMB
not_angel:
mrs r2, cpsr @ turn off interrupts to
orr r2, r2, #0xc0 @ prevent angel from running
@@ -161,7 +162,9 @@ not_angel:
.text
adr r0, LC0
- ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+ ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp} )
+ THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, ip} )
+ THUMB( ldr sp, [r0, #28] )
subs r0, r0, r1 @ calculate the delta offset
@ if delta is zero, we are
@@ -263,22 +266,25 @@ not_relocated: mov r0, #0
* r6 = processor ID
* r7 = architecture ID
* r8 = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
*/
add r1, r5, r0 @ end of decompressed kernel
adr r2, reloc_start
ldr r3, LC1
add r3, r2, r3
-1: ldmia r2!, {r9 - r14} @ copy relocation code
- stmia r1!, {r9 - r14}
- ldmia r2!, {r9 - r14}
- stmia r1!, {r9 - r14}
+1: ldmia r2!, {r9 - r12, r14} @ copy relocation code
+ stmia r1!, {r9 - r12, r14}
+ ldmia r2!, {r9 - r12, r14}
+ stmia r1!, {r9 - r12, r14}
cmp r2, r3
blo 1b
- add sp, r1, #128 @ relocate the stack
+ mov sp, r1
+ add sp, sp, #128 @ relocate the stack
bl cache_clean_flush
- add pc, r5, r0 @ call relocation code
+ ARM( add pc, r5, r0 ) @ call relocation code
+ THUMB( add r12, r5, r0 )
+ THUMB( mov pc, r12 ) @ call relocation code
/*
* We're not in danger of overwriting ourselves. Do this the simple way.
@@ -291,6 +297,7 @@ wont_overwrite: mov r0, r4
bl decompress_kernel
b call_kernel
+ .align 2
.type LC0, #object
LC0: .word LC0 @ r1
.word __bss_start @ r2
@@ -431,6 +438,7 @@ ENDPROC(__setup_mmu)
__armv4_mmu_cache_on:
mov r12, lr
+#ifdef CONFIG_MMU
bl __setup_mmu
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
@@ -444,10 +452,12 @@ __armv4_mmu_cache_on:
bl __common_mmu_cache_on
mov r0, #0
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
+#endif
mov pc, r12
__armv7_mmu_cache_on:
mov r12, lr
+#ifdef CONFIG_MMU
mrc p15, 0, r11, c0, c1, 4 @ read ID_MMFR0
tst r11, #0xf @ VMSA
blne __setup_mmu
@@ -455,9 +465,11 @@ __armv7_mmu_cache_on:
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
tst r11, #0xf @ VMSA
mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
+#endif
mrc p15, 0, r0, c1, c0, 0 @ read control reg
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x003c @ write buffer
+#ifdef CONFIG_MMU
#ifdef CONFIG_CPU_ENDIAN_BE8
orr r0, r0, #1 << 25 @ big-endian page tables
#endif
@@ -465,6 +477,7 @@ __armv7_mmu_cache_on:
movne r1, #-1
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
+#endif
mcr p15, 0, r0, c1, c0, 0 @ load control register
mrc p15, 0, r0, c1, c0, 0 @ and read it back
mov r0, #0
@@ -498,6 +511,7 @@ __arm6_mmu_cache_on:
mov pc, r12
__common_mmu_cache_on:
+#ifndef CONFIG_THUMB2_KERNEL
#ifndef DEBUG
orr r0, r0, #0x000d @ Write buffer, mmu
#endif
@@ -509,6 +523,7 @@ __common_mmu_cache_on:
1: mcr p15, 0, r0, c1, c0, 0 @ load control register
mrc p15, 0, r0, c1, c0, 0 @ and read it back to
sub pc, lr, r0, lsr #32 @ properly flush pipeline
+#endif
/*
* All code following this line is relocatable. It is relocated by
@@ -522,7 +537,7 @@ __common_mmu_cache_on:
* r6 = processor ID
* r7 = architecture ID
* r8 = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
*/
.align 5
reloc_start: add r9, r5, r0
@@ -531,13 +546,14 @@ reloc_start: add r9, r5, r0
mov r1, r4
1:
.rept 4
- ldmia r5!, {r0, r2, r3, r10 - r14} @ relocate kernel
- stmia r1!, {r0, r2, r3, r10 - r14}
+ ldmia r5!, {r0, r2, r3, r10 - r12, r14} @ relocate kernel
+ stmia r1!, {r0, r2, r3, r10 - r12, r14}
.endr
cmp r5, r9
blo 1b
- add sp, r1, #128 @ relocate the stack
+ mov sp, r1
+ add sp, sp, #128 @ relocate the stack
debug_reloc_end
call_kernel: bl cache_clean_flush
@@ -571,7 +587,9 @@ call_cache_fn: adr r12, proc_types
ldr r2, [r12, #4] @ get mask
eor r1, r1, r6 @ (real ^ match)
tst r1, r2 @ & mask
- addeq pc, r12, r3 @ call cache function
+ ARM( addeq pc, r12, r3 ) @ call cache function
+ THUMB( addeq r12, r3 )
+ THUMB( moveq pc, r12 ) @ call cache function
add r12, r12, #4*5
b 1b
@@ -589,13 +607,15 @@ call_cache_fn: adr r12, proc_types
* methods. Writeback caches _must_ have the flush method
* defined.
*/
+ .align 2
.type proc_types,#object
proc_types:
.word 0x41560600 @ ARM6/610
.word 0xffffffe0
- b __arm6_mmu_cache_off @ works, but slow
- b __arm6_mmu_cache_off
+ W(b) __arm6_mmu_cache_off @ works, but slow
+ W(b) __arm6_mmu_cache_off
mov pc, lr
+ THUMB( nop )
@ b __arm6_mmu_cache_on @ untested
@ b __arm6_mmu_cache_off
@ b __armv3_mmu_cache_flush
@@ -603,76 +623,84 @@ proc_types:
.word 0x00000000 @ old ARM ID
.word 0x0000f000
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
.word 0x41007000 @ ARM7/710
.word 0xfff8fe00
- b __arm7_mmu_cache_off
- b __arm7_mmu_cache_off
+ W(b) __arm7_mmu_cache_off
+ W(b) __arm7_mmu_cache_off
mov pc, lr
+ THUMB( nop )
.word 0x41807200 @ ARM720T (writethrough)
.word 0xffffff00
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
mov pc, lr
+ THUMB( nop )
.word 0x41007400 @ ARM74x
.word 0xff00ff00
- b __armv3_mpu_cache_on
- b __armv3_mpu_cache_off
- b __armv3_mpu_cache_flush
+ W(b) __armv3_mpu_cache_on
+ W(b) __armv3_mpu_cache_off
+ W(b) __armv3_mpu_cache_flush
.word 0x41009400 @ ARM94x
.word 0xff00ff00
- b __armv4_mpu_cache_on
- b __armv4_mpu_cache_off
- b __armv4_mpu_cache_flush
+ W(b) __armv4_mpu_cache_on
+ W(b) __armv4_mpu_cache_off
+ W(b) __armv4_mpu_cache_flush
.word 0x00007000 @ ARM7 IDs
.word 0x0000f000
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
@ Everything from here on will be the new ID system.
.word 0x4401a100 @ sa110 / sa1100
.word 0xffffffe0
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x6901b110 @ sa1110
.word 0xfffffff0
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x56056930
.word 0xff0ffff0 @ PXA935
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x56158000 @ PXA168
.word 0xfffff000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv5tej_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv5tej_mmu_cache_flush
.word 0x56056930
.word 0xff0ffff0 @ PXA935
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x56050000 @ Feroceon
.word 0xff0f0000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv5tej_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv5tej_mmu_cache_flush
#ifdef CONFIG_CPU_FEROCEON_OLD_ID
/* this conflicts with the standard ARMv5TE entry */
@@ -685,47 +713,50 @@ proc_types:
.word 0x66015261 @ FA526
.word 0xff01fff1
- b __fa526_cache_on
- b __armv4_mmu_cache_off
- b __fa526_cache_flush
+ W(b) __fa526_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __fa526_cache_flush
@ These match on the architecture ID
.word 0x00020000 @ ARMv4T
.word 0x000f0000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x00050000 @ ARMv5TE
.word 0x000f0000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x00060000 @ ARMv5TEJ
.word 0x000f0000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv5tej_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x0007b000 @ ARMv6
.word 0x000ff000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv6_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv6_mmu_cache_flush
.word 0x000f0000 @ new CPU Id
.word 0x000f0000
- b __armv7_mmu_cache_on
- b __armv7_mmu_cache_off
- b __armv7_mmu_cache_flush
+ W(b) __armv7_mmu_cache_on
+ W(b) __armv7_mmu_cache_off
+ W(b) __armv7_mmu_cache_flush
.word 0 @ unrecognised type
.word 0
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
.size proc_types, . - proc_types
@@ -760,22 +791,30 @@ __armv3_mpu_cache_off:
mov pc, lr
__armv4_mmu_cache_off:
+#ifdef CONFIG_MMU
mrc p15, 0, r0, c1, c0
bic r0, r0, #0x000d
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate whole cache v4
mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
+#endif
mov pc, lr
__armv7_mmu_cache_off:
mrc p15, 0, r0, c1, c0
+#ifdef CONFIG_MMU
bic r0, r0, #0x000d
+#else
+ bic r0, r0, #0x000c
+#endif
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
mov r12, lr
bl __armv7_mmu_cache_flush
mov r0, #0
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB
+#endif
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTC
mcr p15, 0, r0, c7, c10, 4 @ DSB
mcr p15, 0, r0, c7, c5, 4 @ ISB
@@ -852,7 +891,7 @@ __armv7_mmu_cache_flush:
b iflush
hierarchical:
mcr p15, 0, r10, c7, c10, 5 @ DMB
- stmfd sp!, {r0-r5, r7, r9, r11}
+ stmfd sp!, {r0-r7, r9-r11}
mrc p15, 1, r0, c0, c0, 1 @ read clidr
ands r3, r0, #0x7000000 @ extract loc from clidr
mov r3, r3, lsr #23 @ left align loc bit field
@@ -877,8 +916,12 @@ loop1:
loop2:
mov r9, r4 @ create working copy of max way size
loop3:
- orr r11, r10, r9, lsl r5 @ factor way and cache number into r11
- orr r11, r11, r7, lsl r2 @ factor index number into r11
+ ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11
+ ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11
+ THUMB( lsl r6, r9, r5 )
+ THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11
+ THUMB( lsl r6, r7, r2 )
+ THUMB( orr r11, r11, r6 ) @ factor index number into r11
mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
subs r9, r9, #1 @ decrement the way
bge loop3
@@ -889,7 +932,7 @@ skip:
cmp r3, r10
bgt loop1
finished:
- ldmfd sp!, {r0-r5, r7, r9, r11}
+ ldmfd sp!, {r0-r7, r9-r11}
mov r10, #0 @ swith back to cache level 0
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
iflush:
@@ -923,9 +966,13 @@ __armv4_mmu_cache_flush:
mov r11, #8
mov r11, r11, lsl r3 @ cache line size in bytes
no_cache_id:
- bic r1, pc, #63 @ align to longest cache line
+ mov r1, pc
+ bic r1, r1, #63 @ align to longest cache line
add r2, r1, r2
-1: ldr r3, [r1], r11 @ s/w flush D cache
+1:
+ ARM( ldr r3, [r1], r11 ) @ s/w flush D cache
+ THUMB( ldr r3, [r1] ) @ s/w flush D cache
+ THUMB( add r1, r1, r11 )
teq r1, r2
bne 1b
@@ -945,6 +992,7 @@ __armv3_mpu_cache_flush:
* memory, which again must be relocatable.
*/
#ifdef DEBUG
+ .align 2
.type phexbuf,#object
phexbuf: .space 12
.size phexbuf, . - phexbuf
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 6ed89836e90..920ced0b73c 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,10 +22,20 @@
#include <linux/list.h>
#include <linux/io.h>
#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
+static void vic_ack_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+ /* moreover, clear the soft-triggered, in case it was the reason */
+ writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
static void vic_mask_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
@@ -253,12 +263,16 @@ static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg
static struct irq_chip vic_chip = {
.name = "VIC",
- .ack = vic_mask_irq,
+ .ack = vic_ack_irq,
.mask = vic_mask_irq,
.unmask = vic_unmask_irq,
.set_wake = vic_set_wake,
};
+/* The PL190 cell from ARM has been modified by ST, so handle both here */
+static void vik_init_st(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources);
+
/**
* vic_init - initialise a vectored interrupt controller
* @base: iomem base address
@@ -270,6 +284,28 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
u32 vic_sources, u32 resume_sources)
{
unsigned int i;
+ u32 cellid = 0;
+ enum amba_vendor vendor;
+
+ /* Identify which VIC cell this one is, by reading the ID */
+ for (i = 0; i < 4; i++) {
+ u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+ cellid |= (readl(addr) & 0xff) << (8 * i);
+ }
+ vendor = (cellid >> 12) & 0xff;
+ printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+ base, cellid, vendor);
+
+ switch(vendor) {
+ case AMBA_VENDOR_ST:
+ vik_init_st(base, irq_start, vic_sources);
+ return;
+ default:
+ printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+ /* fall through */
+ case AMBA_VENDOR_ARM:
+ break;
+ }
/* Disable all interrupts initially. */
@@ -306,3 +342,60 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
vic_pm_register(base, irq_start, resume_sources);
}
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ * and 020 within the page. We call this "second block".
+ */
+static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources)
+{
+ unsigned int i;
+ int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+ /* Disable all interrupts initially. */
+
+ writel(0, base + VIC_INT_SELECT);
+ writel(0, base + VIC_INT_ENABLE);
+ writel(~0, base + VIC_INT_ENABLE_CLEAR);
+ writel(0, base + VIC_IRQ_STATUS);
+ writel(0, base + VIC_ITCR);
+ writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+ /*
+ * Make sure we clear all existing interrupts. The vector registers
+ * in this cell are after the second block of general registers,
+ * so we can address them using standard offsets, but only from
+ * the second base address, which is 0x20 in the page
+ */
+ if (vic_2nd_block) {
+ writel(0, base + VIC_PL190_VECT_ADDR);
+ for (i = 0; i < 19; i++) {
+ unsigned int value;
+
+ value = readl(base + VIC_PL190_VECT_ADDR);
+ writel(value, base + VIC_PL190_VECT_ADDR);
+ }
+ /* ST has 16 vectors as well, but we don't enable them by now */
+ for (i = 0; i < 16; i++) {
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+ writel(0, reg);
+ }
+
+ writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+ }
+
+ for (i = 0; i < 32; i++) {
+ if (vic_sources & (1 << i)) {
+ unsigned int irq = irq_start + i;
+
+ set_irq_chip(irq, &vic_chip);
+ set_irq_chip_data(irq, base);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+}
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
new file mode 100644
index 00000000000..bcc0bac551a
--- /dev/null
+++ b/arch/arm/configs/bcmring_defconfig
@@ -0,0 +1,725 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Fri Jul 17 12:07:28 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_BCMRING=y
+# CONFIG_ARCH_FPGA11107 is not set
+CONFIG_ARCH_BCM11107=y
+
+#
+# BCMRING Options
+#
+CONFIG_BCM_ZRELADDR=0x8000
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0e000000
+CONFIG_ZBOOT_ROM_BSS=0x0ea00000
+CONFIG_ZBOOT_ROM=y
+CONFIG_CMDLINE=""
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_BCM_UMI=y
+CONFIG_MTD_NAND_BCM_UMI_HWCS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_FSNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
new file mode 100644
index 00000000000..601e7f3d5e9
--- /dev/null
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -0,0 +1,1338 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:57:55 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_AFEB9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+CONFIG_MACH_CPU9260=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
new file mode 100644
index 00000000000..b5b9cbbc697
--- /dev/null
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -0,0 +1,1328 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 15:03:43 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+# CONFIG_MACH_AT91SAM9G20EK is not set
+CONFIG_MACH_CPU9G20=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
new file mode 100644
index 00000000000..4901827253f
--- /dev/null
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:45:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+CONFIG_MACH_CPUAT91=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91RM9200 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index f3074e49f2f..df9bfbea861 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 18:56:58 2008
+# Linux kernel version: 2.6.31-rc6
+# Fri Aug 21 15:41:39 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,16 +17,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -44,10 +41,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -56,9 +62,11 @@ CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
@@ -69,17 +77,22 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@@ -87,30 +100,25 @@ CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -126,7 +134,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
@@ -136,14 +144,15 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -152,23 +161,25 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
#
# SA11x0 Implementations
@@ -189,14 +200,6 @@ CONFIG_SA1100_JORNADA720_SSP=y
CONFIG_SA1100_SSP=y
#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
# Processor Type
#
CONFIG_CPU_32=y
@@ -215,8 +218,8 @@ CONFIG_CPU_CP15_MMU=y
#
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
CONFIG_SA1111=y
+CONFIG_DMABOUNCE=y
CONFIG_FORCE_MAX_ZONEORDER=9
#
@@ -246,30 +249,36 @@ CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_NODES_SHIFT=2
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@@ -281,9 +290,10 @@ CONFIG_CMDLINE=""
# CONFIG_KEXEC is not set
#
-# CPU Frequency scaling
+# CPU Power Management
#
# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -294,12 +304,14 @@ CONFIG_CMDLINE=""
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
-CONFIG_FPE_FASTFPE=y
+# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
@@ -353,7 +365,6 @@ CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
@@ -367,10 +378,12 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
@@ -379,6 +392,7 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -388,7 +402,10 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -431,14 +448,17 @@ CONFIG_IRCOMM=m
CONFIG_SA1100_FIR=m
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
#
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -464,29 +484,34 @@ CONFIG_EXTRA_FIRMWARE=""
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
@@ -513,8 +538,34 @@ CONFIG_DUMMY=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -523,17 +574,27 @@ CONFIG_MII=m
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -565,20 +626,23 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+CONFIG_KEYBOARD_HP7XX=y
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
@@ -587,8 +651,8 @@ CONFIG_TOUCHSCREEN_HP7XX=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -624,11 +688,12 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -650,6 +715,10 @@ CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+
+#
# I2C GPIO expanders:
#
@@ -663,12 +732,14 @@ CONFIG_GPIOLIB=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -676,6 +747,7 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
@@ -687,22 +759,7 @@ CONFIG_SSB_POSSIBLE=y
# Multimedia Capabilities Port drivers
#
# CONFIG_MCP_SA11X0 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -712,6 +769,7 @@ CONFIG_SSB_POSSIBLE=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -733,7 +791,17 @@ CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SA1100 is not set
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_LCD_HP700=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_HP700=y
#
# Display device support
@@ -757,6 +825,8 @@ CONFIG_FONT_8x16=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -781,12 +851,15 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -794,15 +867,10 @@ CONFIG_RTC_INTF_DEV=y
#
CONFIG_RTC_DRV_SA1100=y
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -811,12 +879,16 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -826,6 +898,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -846,14 +923,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -862,6 +937,7 @@ CONFIG_SYSFS=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -870,6 +946,7 @@ CONFIG_SYSFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
@@ -935,12 +1012,16 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -958,19 +1039,20 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -985,13 +1067,16 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@@ -1062,15 +1147,21 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
@@ -1078,7 +1169,7 @@ CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
new file mode 100644
index 00000000000..9bb45b932f0
--- /dev/null
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Tue Jun 23 22:57:16 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_NOMADIK=y
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Nomadik boards
+#
+CONFIG_MACH_NOMADIK_8815NHK=y
+CONFIG_NOMADIK_8815=y
+CONFIG_I2C_BITBANG_8815NHK=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_TESTS=m
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_NOMADIK=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
new file mode 100644
index 00000000000..b0d7d3d3a5e
--- /dev/null
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -0,0 +1,892 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jul 1 15:53:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5PC1XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_PLAT_S5PC1XX=y
+CONFIG_CPU_S5PC100_INIT=y
+CONFIG_CPU_S5PC100_CLOCK=y
+CONFIG_S5PC100_SETUP_I2C0=y
+CONFIG_CPU_S5PC100=y
+CONFIG_MACH_SMDKC100=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a092b70..00f46d9ce29 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -74,23 +74,56 @@
* Enable and disable interrupts
*/
#if __LINUX_ARM_ARCH__ >= 6
- .macro disable_irq
+ .macro disable_irq_notrace
cpsid i
.endm
- .macro enable_irq
+ .macro enable_irq_notrace
cpsie i
.endm
#else
- .macro disable_irq
+ .macro disable_irq_notrace
msr cpsr_c, #PSR_I_BIT | SVC_MODE
.endm
- .macro enable_irq
+ .macro enable_irq_notrace
msr cpsr_c, #SVC_MODE
.endm
#endif
+ .macro asm_trace_hardirqs_off
+#if defined(CONFIG_TRACE_IRQFLAGS)
+ stmdb sp!, {r0-r3, ip, lr}
+ bl trace_hardirqs_off
+ ldmia sp!, {r0-r3, ip, lr}
+#endif
+ .endm
+
+ .macro asm_trace_hardirqs_on_cond, cond
+#if defined(CONFIG_TRACE_IRQFLAGS)
+ /*
+ * actually the registers should be pushed and pop'd conditionally, but
+ * after bl the flags are certainly clobbered
+ */
+ stmdb sp!, {r0-r3, ip, lr}
+ bl\cond trace_hardirqs_on
+ ldmia sp!, {r0-r3, ip, lr}
+#endif
+ .endm
+
+ .macro asm_trace_hardirqs_on
+ asm_trace_hardirqs_on_cond al
+ .endm
+
+ .macro disable_irq
+ disable_irq_notrace
+ asm_trace_hardirqs_off
+ .endm
+
+ .macro enable_irq
+ asm_trace_hardirqs_on
+ enable_irq_notrace
+ .endm
/*
* Save the current IRQ state and disable IRQs. Note that this macro
* assumes FIQs are enabled, and that the processor is in SVC mode.
@@ -104,10 +137,16 @@
* Restore interrupt state previously stored in a register. We don't
* guarantee that this will preserve the flags.
*/
- .macro restore_irqs, oldcpsr
+ .macro restore_irqs_notrace, oldcpsr
msr cpsr_c, \oldcpsr
.endm
+ .macro restore_irqs, oldcpsr
+ tst \oldcpsr, #PSR_I_BIT
+ asm_trace_hardirqs_on_cond eq
+ restore_irqs_notrace \oldcpsr
+ .endm
+
#define USER(x...) \
9999: x; \
.section __ex_table,"a"; \
@@ -127,3 +166,87 @@
#endif
#endif
.endm
+
+#ifdef CONFIG_THUMB2_KERNEL
+ .macro setmode, mode, reg
+ mov \reg, #\mode
+ msr cpsr_c, \reg
+ .endm
+#else
+ .macro setmode, mode, reg
+ msr cpsr_c, #\mode
+ .endm
+#endif
+
+/*
+ * STRT/LDRT access macros with ARM and Thumb-2 variants
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+
+ .macro usraccoff, instr, reg, ptr, inc, off, cond, abort
+9999:
+ .if \inc == 1
+ \instr\cond\()bt \reg, [\ptr, #\off]
+ .elseif \inc == 4
+ \instr\cond\()t \reg, [\ptr, #\off]
+ .else
+ .error "Unsupported inc macro argument"
+ .endif
+
+ .section __ex_table,"a"
+ .align 3
+ .long 9999b, \abort
+ .previous
+ .endm
+
+ .macro usracc, instr, reg, ptr, inc, cond, rept, abort
+ @ explicit IT instruction needed because of the label
+ @ introduced by the USER macro
+ .ifnc \cond,al
+ .if \rept == 1
+ itt \cond
+ .elseif \rept == 2
+ ittt \cond
+ .else
+ .error "Unsupported rept macro argument"
+ .endif
+ .endif
+
+ @ Slightly optimised to avoid incrementing the pointer twice
+ usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
+ .if \rept == 2
+ usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+ .endif
+
+ add\cond \ptr, #\rept * \inc
+ .endm
+
+#else /* !CONFIG_THUMB2_KERNEL */
+
+ .macro usracc, instr, reg, ptr, inc, cond, rept, abort
+ .rept \rept
+9999:
+ .if \inc == 1
+ \instr\cond\()bt \reg, [\ptr], #\inc
+ .elseif \inc == 4
+ \instr\cond\()t \reg, [\ptr], #\inc
+ .else
+ .error "Unsupported inc macro argument"
+ .endif
+
+ .section __ex_table,"a"
+ .align 3
+ .long 9999b, \abort
+ .previous
+ .endr
+ .endm
+
+#endif /* CONFIG_THUMB2_KERNEL */
+
+ .macro strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+ usracc str, \reg, \ptr, \inc, \cond, \rept, \abort
+ .endm
+
+ .macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+ usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort
+ .endm
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c207504de84..c3b911ee915 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -55,6 +55,9 @@ typedef struct user_fp elf_fpregset_t;
#define R_ARM_MOVW_ABS_NC 43
#define R_ARM_MOVT_ABS 44
+#define R_ARM_THM_CALL 10
+#define R_ARM_THM_JUMP24 30
+
/*
* These are used to set parameters in the core dumps.
*/
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1a006..103f7ee9731 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -7,8 +7,43 @@
#ifndef __ASSEMBLY__
extern void mcount(void);
+extern void __gnu_mcount_nc(void);
#endif
#endif
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * return_address uses walk_stackframe to do it's work. If both
+ * CONFIG_FRAME_POINTER=y and CONFIG_ARM_UNWIND=y walk_stackframe uses unwind
+ * information. For this to work in the function tracer many functions would
+ * have to be marked with __notrace. So for now just depend on
+ * !CONFIG_ARM_UNWIND.
+ */
+
+void *return_address(unsigned int);
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+ return NULL;
+}
+
+#endif
+
+#define HAVE_ARCH_CALLER_ADDR
+
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* ifndef __ASSEMBLY__ */
+
#endif /* _ASM_ARM_FTRACE */
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 9ee743b95de..bfcc15929a7 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -99,6 +99,7 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
"1: ldrt %0, [%3]\n"
" teq %0, %1\n"
+ " it eq @ explicit IT needed for the 2b label\n"
"2: streqt %2, [%3]\n"
"3:\n"
" .section __ex_table,\"a\"\n"
diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
index 4da332b0314..b490ecc79de 100644
--- a/arch/arm/include/asm/mach/mmc.h
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -10,6 +10,8 @@ struct mmc_platform_data {
unsigned int ocr_mask; /* available voltages */
u32 (*translate_vdd)(struct device *, unsigned int);
unsigned int (*status)(struct device *);
+ int gpio_wp;
+ int gpio_cd;
};
#endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 85763db8744..cefedf06213 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -44,7 +44,13 @@
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 32MB of the kernel text.
*/
+#ifndef CONFIG_THUMB2_KERNEL
#define MODULES_VADDR (PAGE_OFFSET - 16*1024*1024)
+#else
+/* smaller range for Thumb-2 symbols relocation (2^24)*/
+#define MODULES_VADDR (PAGE_OFFSET - 8*1024*1024)
+#endif
+
#if TASK_SIZE > MODULES_VADDR
#error Top of user space clashes with start of module space
#endif
@@ -212,7 +218,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
*
* page_to_pfn(page) convert a struct page * to a PFN number
* pfn_to_page(pfn) convert a _valid_ PFN number to struct page *
- * pfn_valid(pfn) indicates whether a PFN number is valid
*
* virt_to_page(k) convert a _valid_ virtual address to struct page *
* virt_addr_valid(k) indicates whether a virtual address is valid
@@ -221,10 +226,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET
-#ifndef CONFIG_SPARSEMEM
-#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
-#endif
-
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
@@ -241,18 +242,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn)
#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
-#define pfn_valid(pfn) \
- ({ \
- unsigned int nid = PFN_TO_NID(pfn); \
- int valid = nid < MAX_NUMNODES; \
- if (valid) { \
- pg_data_t *node = NODE_DATA(nid); \
- valid = (pfn - node->node_start_pfn) < \
- node->node_spanned_pages; \
- } \
- valid; \
- })
-
#define virt_to_page(kaddr) \
(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 263fed05ea3..bcdb9291ef0 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -62,8 +62,10 @@ static inline void check_context(struct mm_struct *mm)
static inline void check_context(struct mm_struct *mm)
{
+#ifdef CONFIG_MMU
if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
__check_kvm_seq(mm);
+#endif
}
#define init_new_context(tsk,mm) 0
diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
index 3574c0deb37..d1b162a18dc 100644
--- a/arch/arm/include/asm/page-nommu.h
+++ b/arch/arm/include/asm/page-nommu.h
@@ -43,7 +43,4 @@ typedef unsigned long pgprot_t;
#define __pmd(x) (x)
#define __pgprot(x) (x)
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
#endif
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 9c746af1bf6..3a32af4cce3 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -194,6 +194,10 @@ typedef unsigned long pgprot_t;
typedef struct page *pgtable_t;
+#ifndef CONFIG_SPARSEMEM
+extern int pfn_valid(unsigned long);
+#endif
+
#include <asm/memory.h>
#endif /* !__ASSEMBLY__ */
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 3dcd64bf182..b12cc98bbe0 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -36,6 +36,8 @@ extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
#define pgd_alloc(mm) get_pgd_slow(mm)
#define pgd_free(mm, pgd) free_pgd_slow(mm, pgd)
+#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
/*
* Allocate one PTE table.
*
@@ -57,7 +59,7 @@ pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
{
pte_t *pte;
- pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+ pte = (pte_t *)__get_free_page(PGALLOC_GFP);
if (pte) {
clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
pte += PTRS_PER_PTE;
@@ -71,10 +73,16 @@ pte_alloc_one(struct mm_struct *mm, unsigned long addr)
{
struct page *pte;
- pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+#ifdef CONFIG_HIGHPTE
+ pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
+#else
+ pte = alloc_pages(PGALLOC_GFP, 0);
+#endif
if (pte) {
- void *page = page_address(pte);
- clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+ if (!PageHighMem(pte)) {
+ void *page = page_address(pte);
+ clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+ }
pgtable_page_ctor(pte);
}
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index c433c6c7311..201ccaa11f6 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -162,10 +162,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
* entries are stored 1024 bytes below.
*/
#define L_PTE_PRESENT (1 << 0)
-#define L_PTE_FILE (1 << 1) /* only when !PRESENT */
#define L_PTE_YOUNG (1 << 1)
-#define L_PTE_BUFFERABLE (1 << 2) /* obsolete, matches PTE */
-#define L_PTE_CACHEABLE (1 << 3) /* obsolete, matches PTE */
+#define L_PTE_FILE (1 << 2) /* only when !PRESENT */
#define L_PTE_DIRTY (1 << 6)
#define L_PTE_WRITE (1 << 7)
#define L_PTE_USER (1 << 8)
@@ -264,10 +262,19 @@ extern struct page *empty_zero_page;
#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
#define pte_page(pte) (pfn_to_page(pte_pfn(pte)))
#define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte) do { } while (0)
-#define pte_unmap_nested(pte) do { } while (0)
+
+#define pte_offset_map(dir,addr) (__pte_map(dir, KM_PTE0) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr) (__pte_map(dir, KM_PTE1) + __pte_index(addr))
+#define pte_unmap(pte) __pte_unmap(pte, KM_PTE0)
+#define pte_unmap_nested(pte) __pte_unmap(pte, KM_PTE1)
+
+#ifndef CONFIG_HIGHPTE
+#define __pte_map(dir,km) pmd_page_vaddr(*(dir))
+#define __pte_unmap(pte,km) do { } while (0)
+#else
+#define __pte_map(dir,km) ((pte_t *)kmap_atomic(pmd_page(*(dir)), km) + PTRS_PER_PTE)
+#define __pte_unmap(pte,km) kunmap_atomic((pte - PTRS_PER_PTE), km)
+#endif
#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
@@ -381,13 +388,13 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
*
* 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
* 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * <--------------- offset --------------------> <--- type --> 0 0
+ * <--------------- offset --------------------> <- type --> 0 0 0
*
- * This gives us up to 127 swap files and 32GB per swap file. Note that
+ * This gives us up to 63 swap files and 32GB per swap file. Note that
* the offset field is always non-zero.
*/
-#define __SWP_TYPE_SHIFT 2
-#define __SWP_TYPE_BITS 7
+#define __SWP_TYPE_SHIFT 3
+#define __SWP_TYPE_BITS 6
#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
@@ -411,13 +418,13 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
*
* 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
* 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * <------------------------ offset -------------------------> 1 0
+ * <----------------------- offset ------------------------> 1 0 0
*/
#define pte_file(pte) (pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x) (pte_val(x) >> 2)
-#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE)
+#define pte_to_pgoff(x) (pte_val(x) >> 3)
+#define pgoff_to_pte(x) __pte(((x) << 3) | L_PTE_FILE)
-#define PTE_FILE_MAX_BITS 30
+#define PTE_FILE_MAX_BITS 29
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
/* FIXME: this is not correct */
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 67b833c9b6b..bbecccda76d 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -82,6 +82,14 @@
#define PSR_ENDSTATE 0
#endif
+/*
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define PT_TEXT_ADDR 0x10000
+#define PT_DATA_ADDR 0x10004
+#define PT_TEXT_END_ADDR 0x10008
+
#ifndef __ASSEMBLY__
/*
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index d3a39b1e6c0..2dfb7d7a66e 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -142,6 +142,7 @@ extern void vfp_sync_state(struct thread_info *thread);
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18
#define TIF_FREEZE 19
+#define TIF_RESTORE_SIGMASK 20
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
@@ -150,6 +151,7 @@ extern void vfp_sync_state(struct thread_info *thread);
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_FREEZE (1 << TIF_FREEZE)
+#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
/*
* Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 0da9bc9b3b1..1d6bd40a432 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -17,6 +17,7 @@
#include <asm/memory.h>
#include <asm/domain.h>
#include <asm/system.h>
+#include <asm/unified.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
@@ -365,8 +366,10 @@ do { \
#define __put_user_asm_dword(x,__pu_addr,err) \
__asm__ __volatile__( \
- "1: strt " __reg_oper1 ", [%1], #4\n" \
- "2: strt " __reg_oper0 ", [%1]\n" \
+ ARM( "1: strt " __reg_oper1 ", [%1], #4\n" ) \
+ ARM( "2: strt " __reg_oper0 ", [%1]\n" ) \
+ THUMB( "1: strt " __reg_oper1 ", [%1]\n" ) \
+ THUMB( "2: strt " __reg_oper0 ", [%1, #4]\n" ) \
"3:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
new file mode 100644
index 00000000000..073e85b9b96
--- /dev/null
+++ b/arch/arm/include/asm/unified.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/unified.h - Unified Assembler Syntax helper macros
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNIFIED_H
+#define __ASM_UNIFIED_H
+
+#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED)
+ .syntax unified
+#endif
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+#if __GNUC__ < 4
+#error Thumb-2 kernel requires gcc >= 4
+#endif
+
+/* The CPSR bit describing the instruction set (Thumb) */
+#define PSR_ISETSTATE PSR_T_BIT
+
+#define ARM(x...)
+#define THUMB(x...) x
+#define W(instr) instr.w
+#define BSYM(sym) sym + 1
+
+#else /* !CONFIG_THUMB2_KERNEL */
+
+/* The CPSR bit describing the instruction set (ARM) */
+#define PSR_ISETSTATE 0
+
+#define ARM(x...) x
+#define THUMB(x...)
+#define W(instr) instr
+#define BSYM(sym) sym
+
+#endif /* CONFIG_THUMB2_KERNEL */
+
+#ifndef CONFIG_ARM_ASM_UNIFIED
+
+/*
+ * If the unified assembly syntax isn't used (in ARM mode), these
+ * macros expand to an empty string
+ */
+#ifdef __ASSEMBLY__
+ .macro it, cond
+ .endm
+ .macro itt, cond
+ .endm
+ .macro ite, cond
+ .endm
+ .macro ittt, cond
+ .endm
+ .macro itte, cond
+ .endm
+ .macro itet, cond
+ .endm
+ .macro itee, cond
+ .endm
+ .macro itttt, cond
+ .endm
+ .macro ittte, cond
+ .endm
+ .macro ittet, cond
+ .endm
+ .macro ittee, cond
+ .endm
+ .macro itett, cond
+ .endm
+ .macro itete, cond
+ .endm
+ .macro iteet, cond
+ .endm
+ .macro iteee, cond
+ .endm
+#else /* !__ASSEMBLY__ */
+__asm__(
+" .macro it, cond\n"
+" .endm\n"
+" .macro itt, cond\n"
+" .endm\n"
+" .macro ite, cond\n"
+" .endm\n"
+" .macro ittt, cond\n"
+" .endm\n"
+" .macro itte, cond\n"
+" .endm\n"
+" .macro itet, cond\n"
+" .endm\n"
+" .macro itee, cond\n"
+" .endm\n"
+" .macro itttt, cond\n"
+" .endm\n"
+" .macro ittte, cond\n"
+" .endm\n"
+" .macro ittet, cond\n"
+" .endm\n"
+" .macro ittee, cond\n"
+" .endm\n"
+" .macro itett, cond\n"
+" .endm\n"
+" .macro itete, cond\n"
+" .endm\n"
+" .macro iteet, cond\n"
+" .endm\n"
+" .macro iteee, cond\n"
+" .endm\n");
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_ARM_ASM_UNIFIED */
+
+#endif /* !__ASM_UNIFIED_H */
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 0e97b8cb77d..9122c9ee18f 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -360,8 +360,8 @@
#define __NR_readlinkat (__NR_SYSCALL_BASE+332)
#define __NR_fchmodat (__NR_SYSCALL_BASE+333)
#define __NR_faccessat (__NR_SYSCALL_BASE+334)
- /* 335 for pselect6 */
- /* 336 for ppoll */
+#define __NR_pselect6 (__NR_SYSCALL_BASE+335)
+#define __NR_ppoll (__NR_SYSCALL_BASE+336)
#define __NR_unshare (__NR_SYSCALL_BASE+337)
#define __NR_set_robust_list (__NR_SYSCALL_BASE+338)
#define __NR_get_robust_list (__NR_SYSCALL_BASE+339)
@@ -372,7 +372,7 @@
#define __NR_vmsplice (__NR_SYSCALL_BASE+343)
#define __NR_move_pages (__NR_SYSCALL_BASE+344)
#define __NR_getcpu (__NR_SYSCALL_BASE+345)
- /* 346 for epoll_pwait */
+#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346)
#define __NR_kexec_load (__NR_SYSCALL_BASE+347)
#define __NR_utimensat (__NR_SYSCALL_BASE+348)
#define __NR_signalfd (__NR_SYSCALL_BASE+349)
@@ -432,6 +432,7 @@
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
#define __ARCH_WANT_SYS_TIME
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ff89d0b3abc..3213c9382b1 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -8,10 +8,12 @@ ifdef CONFIG_DYNAMIC_FTRACE
CFLAGS_REMOVE_ftrace.o = -pg
endif
+CFLAGS_REMOVE_return_address.o = -pg
+
# Object file lists.
obj-y := compat.o elf.o entry-armv.o entry-common.o irq.o \
- process.o ptrace.o setup.o signal.o \
+ process.o ptrace.o return_address.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 531e1860e54..0e627705f74 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -186,4 +186,5 @@ EXPORT_SYMBOL(_find_next_bit_be);
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(mcount);
+EXPORT_SYMBOL(__gnu_mcount_nc);
#endif
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index f776e72a4cb..ecfa98954d1 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -81,7 +81,7 @@
CALL(sys_ni_syscall) /* was sys_ssetmask */
/* 70 */ CALL(sys_setreuid16)
CALL(sys_setregid16)
- CALL(sys_sigsuspend_wrapper)
+ CALL(sys_sigsuspend)
CALL(sys_sigpending)
CALL(sys_sethostname)
/* 75 */ CALL(sys_setrlimit)
@@ -188,7 +188,7 @@
CALL(sys_rt_sigpending)
CALL(sys_rt_sigtimedwait)
CALL(sys_rt_sigqueueinfo)
- CALL(sys_rt_sigsuspend_wrapper)
+ CALL(sys_rt_sigsuspend)
/* 180 */ CALL(ABI(sys_pread64, sys_oabi_pread64))
CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
CALL(sys_chown16)
@@ -344,8 +344,8 @@
CALL(sys_readlinkat)
CALL(sys_fchmodat)
CALL(sys_faccessat)
-/* 335 */ CALL(sys_ni_syscall) /* eventually pselect6 */
- CALL(sys_ni_syscall) /* eventually ppoll */
+/* 335 */ CALL(sys_pselect6)
+ CALL(sys_ppoll)
CALL(sys_unshare)
CALL(sys_set_robust_list)
CALL(sys_get_robust_list)
@@ -355,7 +355,7 @@
CALL(sys_vmsplice)
CALL(sys_move_pages)
/* 345 */ CALL(sys_getcpu)
- CALL(sys_ni_syscall) /* eventually epoll_pwait */
+ CALL(sys_epoll_pwait)
CALL(sys_kexec_load)
CALL(sys_utimensat)
CALL(sys_signalfd)
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 99995c2b231..769abe15cf9 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -31,7 +31,7 @@ void crunch_task_release(struct thread_info *thread)
static int crunch_enabled(u32 devcfg)
{
- return !!(devcfg & EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE);
+ return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA);
}
static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
@@ -56,11 +56,16 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
break;
case THREAD_NOTIFY_SWITCH:
- devcfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+ devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
if (crunch_enabled(devcfg) || crunch_owner == crunch_state) {
- devcfg ^= EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
+ /*
+ * We don't use ep93xx_syscon_swlocked_write() here
+ * because we are on the context switch path and
+ * preemption is already disabled.
+ */
+ devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA;
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(devcfg, EP93XX_SYSCON_DEVICE_CONFIG);
+ __raw_writel(devcfg, EP93XX_SYSCON_DEVCFG);
}
break;
}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index fc8af43c500..3d727a8a23b 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -34,7 +34,7 @@
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
- adrne lr, 1b
+ adrne lr, BSYM(1b)
bne asm_do_IRQ
#ifdef CONFIG_SMP
@@ -46,13 +46,13 @@
*/
test_for_ipi r0, r6, r5, lr
movne r0, sp
- adrne lr, 1b
+ adrne lr, BSYM(1b)
bne do_IPI
#ifdef CONFIG_LOCAL_TIMERS
test_for_ltirq r0, r6, r5, lr
movne r0, sp
- adrne lr, 1b
+ adrne lr, BSYM(1b)
bne do_local_timer
#endif
#endif
@@ -70,7 +70,10 @@
*/
.macro inv_entry, reason
sub sp, sp, #S_FRAME_SIZE
- stmib sp, {r1 - lr}
+ ARM( stmib sp, {r1 - lr} )
+ THUMB( stmia sp, {r0 - r12} )
+ THUMB( str sp, [sp, #S_SP] )
+ THUMB( str lr, [sp, #S_LR] )
mov r1, #\reason
.endm
@@ -126,17 +129,24 @@ ENDPROC(__und_invalid)
.macro svc_entry, stack_hole=0
UNWIND(.fnstart )
UNWIND(.save {r0 - pc} )
- sub sp, sp, #(S_FRAME_SIZE + \stack_hole)
+ sub sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+#ifdef CONFIG_THUMB2_KERNEL
+ SPFIX( str r0, [sp] ) @ temporarily saved
+ SPFIX( mov r0, sp )
+ SPFIX( tst r0, #4 ) @ test original stack alignment
+ SPFIX( ldr r0, [sp] ) @ restored
+#else
SPFIX( tst sp, #4 )
- SPFIX( bicne sp, sp, #4 )
- stmib sp, {r1 - r12}
+#endif
+ SPFIX( subeq sp, sp, #4 )
+ stmia sp, {r1 - r12}
ldmia r0, {r1 - r3}
- add r5, sp, #S_SP @ here for interlock avoidance
+ add r5, sp, #S_SP - 4 @ here for interlock avoidance
mov r4, #-1 @ "" "" "" ""
- add r0, sp, #(S_FRAME_SIZE + \stack_hole)
- SPFIX( addne r0, r0, #4 )
- str r1, [sp] @ save the "real" r0 copied
+ add r0, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ SPFIX( addeq r0, r0, #4 )
+ str r1, [sp, #-4]! @ save the "real" r0 copied
@ from the exception stack
mov r1, lr
@@ -151,6 +161,8 @@ ENDPROC(__und_invalid)
@ r4 - orig_r0 (see pt_regs definition in ptrace.h)
@
stmia r5, {r0 - r4}
+
+ asm_trace_hardirqs_off
.endm
.align 5
@@ -196,9 +208,8 @@ __dabt_svc:
@
@ restore SPSR and restart the instruction
@
- ldr r0, [sp, #S_PSR]
- msr spsr_cxsf, r0
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ ldr r2, [sp, #S_PSR]
+ svc_exit r2 @ return from exception
UNWIND(.fnend )
ENDPROC(__dabt_svc)
@@ -206,9 +217,6 @@ ENDPROC(__dabt_svc)
__irq_svc:
svc_entry
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl trace_hardirqs_off
-#endif
#ifdef CONFIG_PREEMPT
get_thread_info tsk
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
@@ -225,13 +233,12 @@ __irq_svc:
tst r0, #_TIF_NEED_RESCHED
blne svc_preempt
#endif
- ldr r0, [sp, #S_PSR] @ irqs are already disabled
- msr spsr_cxsf, r0
+ ldr r4, [sp, #S_PSR] @ irqs are already disabled
#ifdef CONFIG_TRACE_IRQFLAGS
- tst r0, #PSR_I_BIT
+ tst r4, #PSR_I_BIT
bleq trace_hardirqs_on
#endif
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ svc_exit r4 @ return from exception
UNWIND(.fnend )
ENDPROC(__irq_svc)
@@ -266,7 +273,7 @@ __und_svc:
@ r0 - instruction
@
ldr r0, [r2, #-4]
- adr r9, 1f
+ adr r9, BSYM(1f)
bl call_fpe
mov r0, sp @ struct pt_regs *regs
@@ -280,9 +287,8 @@ __und_svc:
@
@ restore SPSR and restart the instruction
@
- ldr lr, [sp, #S_PSR] @ Get SVC cpsr
- msr spsr_cxsf, lr
- ldmia sp, {r0 - pc}^ @ Restore SVC registers
+ ldr r2, [sp, #S_PSR] @ Get SVC cpsr
+ svc_exit r2 @ return from exception
UNWIND(.fnend )
ENDPROC(__und_svc)
@@ -323,9 +329,8 @@ __pabt_svc:
@
@ restore SPSR and restart the instruction
@
- ldr r0, [sp, #S_PSR]
- msr spsr_cxsf, r0
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ ldr r2, [sp, #S_PSR]
+ svc_exit r2 @ return from exception
UNWIND(.fnend )
ENDPROC(__pabt_svc)
@@ -353,7 +358,8 @@ ENDPROC(__pabt_svc)
UNWIND(.fnstart )
UNWIND(.cantunwind ) @ don't unwind the user space
sub sp, sp, #S_FRAME_SIZE
- stmib sp, {r1 - r12}
+ ARM( stmib sp, {r1 - r12} )
+ THUMB( stmia sp, {r0 - r12} )
ldmia r0, {r1 - r3}
add r0, sp, #S_PC @ here for interlock avoidance
@@ -372,7 +378,8 @@ ENDPROC(__pabt_svc)
@ Also, separately save sp_usr and lr_usr
@
stmia r0, {r2 - r4}
- stmdb r0, {sp, lr}^
+ ARM( stmdb r0, {sp, lr}^ )
+ THUMB( store_user_sp_lr r0, r1, S_SP - S_PC )
@
@ Enable the alignment trap while in kernel mode
@@ -383,6 +390,8 @@ ENDPROC(__pabt_svc)
@ Clear FP to mark the first stack frame
@
zero_fp
+
+ asm_trace_hardirqs_off
.endm
.macro kuser_cmpxchg_check
@@ -427,7 +436,7 @@ __dabt_usr:
@
enable_irq
mov r2, sp
- adr lr, ret_from_exception
+ adr lr, BSYM(ret_from_exception)
b do_DataAbort
UNWIND(.fnend )
ENDPROC(__dabt_usr)
@@ -437,9 +446,6 @@ __irq_usr:
usr_entry
kuser_cmpxchg_check
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl trace_hardirqs_off
-#endif
get_thread_info tsk
#ifdef CONFIG_PREEMPT
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
@@ -452,7 +458,9 @@ __irq_usr:
ldr r0, [tsk, #TI_PREEMPT]
str r8, [tsk, #TI_PREEMPT]
teq r0, r7
- strne r0, [r0, -r0]
+ ARM( strne r0, [r0, -r0] )
+ THUMB( movne r0, #0 )
+ THUMB( strne r0, [r0] )
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_on
@@ -476,9 +484,10 @@ __und_usr:
@
@ r0 - instruction
@
- adr r9, ret_from_exception
- adr lr, __und_usr_unknown
+ adr r9, BSYM(ret_from_exception)
+ adr lr, BSYM(__und_usr_unknown)
tst r3, #PSR_T_BIT @ Thumb mode?
+ itet eq @ explicit IT needed for the 1f label
subeq r4, r2, #4 @ ARM instr at LR - 4
subne r4, r2, #2 @ Thumb instr at LR - 2
1: ldreqt r0, [r4]
@@ -488,7 +497,10 @@ __und_usr:
beq call_fpe
@ Thumb instruction
#if __LINUX_ARM_ARCH__ >= 7
-2: ldrht r5, [r4], #2
+2:
+ ARM( ldrht r5, [r4], #2 )
+ THUMB( ldrht r5, [r4] )
+ THUMB( add r4, r4, #2 )
and r0, r5, #0xf800 @ mask bits 111x x... .... ....
cmp r0, #0xe800 @ 32bit instruction if xx != 0
blo __und_usr_unknown
@@ -577,9 +589,11 @@ call_fpe:
moveq pc, lr
get_thread_info r10 @ get current thread
and r8, r0, #0x00000f00 @ mask out CP number
+ THUMB( lsr r8, r8, #8 )
mov r7, #1
add r6, r10, #TI_USED_CP
- strb r7, [r6, r8, lsr #8] @ set appropriate used_cp[]
+ ARM( strb r7, [r6, r8, lsr #8] ) @ set appropriate used_cp[]
+ THUMB( strb r7, [r6, r8] ) @ set appropriate used_cp[]
#ifdef CONFIG_IWMMXT
@ Test if we need to give access to iWMMXt coprocessors
ldr r5, [r10, #TI_FLAGS]
@@ -587,36 +601,38 @@ call_fpe:
movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1)
bcs iwmmxt_task_enable
#endif
- add pc, pc, r8, lsr #6
- mov r0, r0
-
- mov pc, lr @ CP#0
- b do_fpe @ CP#1 (FPE)
- b do_fpe @ CP#2 (FPE)
- mov pc, lr @ CP#3
+ ARM( add pc, pc, r8, lsr #6 )
+ THUMB( lsl r8, r8, #2 )
+ THUMB( add pc, r8 )
+ nop
+
+ W(mov) pc, lr @ CP#0
+ W(b) do_fpe @ CP#1 (FPE)
+ W(b) do_fpe @ CP#2 (FPE)
+ W(mov) pc, lr @ CP#3
#ifdef CONFIG_CRUNCH
b crunch_task_enable @ CP#4 (MaverickCrunch)
b crunch_task_enable @ CP#5 (MaverickCrunch)
b crunch_task_enable @ CP#6 (MaverickCrunch)
#else
- mov pc, lr @ CP#4
- mov pc, lr @ CP#5
- mov pc, lr @ CP#6
+ W(mov) pc, lr @ CP#4
+ W(mov) pc, lr @ CP#5
+ W(mov) pc, lr @ CP#6
#endif
- mov pc, lr @ CP#7
- mov pc, lr @ CP#8
- mov pc, lr @ CP#9
+ W(mov) pc, lr @ CP#7
+ W(mov) pc, lr @ CP#8
+ W(mov) pc, lr @ CP#9
#ifdef CONFIG_VFP
- b do_vfp @ CP#10 (VFP)
- b do_vfp @ CP#11 (VFP)
+ W(b) do_vfp @ CP#10 (VFP)
+ W(b) do_vfp @ CP#11 (VFP)
#else
- mov pc, lr @ CP#10 (VFP)
- mov pc, lr @ CP#11 (VFP)
+ W(mov) pc, lr @ CP#10 (VFP)
+ W(mov) pc, lr @ CP#11 (VFP)
#endif
- mov pc, lr @ CP#12
- mov pc, lr @ CP#13
- mov pc, lr @ CP#14 (Debug)
- mov pc, lr @ CP#15 (Control)
+ W(mov) pc, lr @ CP#12
+ W(mov) pc, lr @ CP#13
+ W(mov) pc, lr @ CP#14 (Debug)
+ W(mov) pc, lr @ CP#15 (Control)
#ifdef CONFIG_NEON
.align 6
@@ -667,7 +683,7 @@ no_fp: mov pc, lr
__und_usr_unknown:
enable_irq
mov r0, sp
- adr lr, ret_from_exception
+ adr lr, BSYM(ret_from_exception)
b do_undefinstr
ENDPROC(__und_usr_unknown)
@@ -711,7 +727,10 @@ ENTRY(__switch_to)
UNWIND(.cantunwind )
add ip, r1, #TI_CPU_SAVE
ldr r3, [r2, #TI_TP_VALUE]
- stmia ip!, {r4 - sl, fp, sp, lr} @ Store most regs on stack
+ ARM( stmia ip!, {r4 - sl, fp, sp, lr} ) @ Store most regs on stack
+ THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack
+ THUMB( str sp, [ip], #4 )
+ THUMB( str lr, [ip], #4 )
#ifdef CONFIG_MMU
ldr r6, [r2, #TI_CPU_DOMAIN]
#endif
@@ -736,8 +755,12 @@ ENTRY(__switch_to)
ldr r0, =thread_notify_head
mov r1, #THREAD_NOTIFY_SWITCH
bl atomic_notifier_call_chain
+ THUMB( mov ip, r4 )
mov r0, r5
- ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
+ ARM( ldmia r4, {r4 - sl, fp, sp, pc} ) @ Load all regs saved previously
+ THUMB( ldmia ip!, {r4 - sl, fp} ) @ Load all regs saved previously
+ THUMB( ldr sp, [ip], #4 )
+ THUMB( ldr pc, [ip] )
UNWIND(.fnend )
ENDPROC(__switch_to)
@@ -772,6 +795,7 @@ ENDPROC(__switch_to)
* if your compiled code is not going to use the new instructions for other
* purpose.
*/
+ THUMB( .arm )
.macro usr_ret, reg
#ifdef CONFIG_ARM_THUMB
@@ -1020,6 +1044,7 @@ __kuser_helper_version: @ 0xffff0ffc
.globl __kuser_helper_end
__kuser_helper_end:
+ THUMB( .thumb )
/*
* Vector stubs.
@@ -1054,17 +1079,23 @@ vector_\name:
@ Prepare for SVC32 mode. IRQs remain disabled.
@
mrs r0, cpsr
- eor r0, r0, #(\mode ^ SVC_MODE)
+ eor r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
msr spsr_cxsf, r0
@
@ the branch table must immediately follow this code
@
and lr, lr, #0x0f
+ THUMB( adr r0, 1f )
+ THUMB( ldr lr, [r0, lr, lsl #2] )
mov r0, sp
- ldr lr, [pc, lr, lsl #2]
+ ARM( ldr lr, [pc, lr, lsl #2] )
movs pc, lr @ branch to handler in SVC mode
ENDPROC(vector_\name)
+
+ .align 2
+ @ handler addresses follow this label
+1:
.endm
.globl __stubs_start
@@ -1202,14 +1233,16 @@ __stubs_end:
.globl __vectors_start
__vectors_start:
- swi SYS_ERROR0
- b vector_und + stubs_offset
- ldr pc, .LCvswi + stubs_offset
- b vector_pabt + stubs_offset
- b vector_dabt + stubs_offset
- b vector_addrexcptn + stubs_offset
- b vector_irq + stubs_offset
- b vector_fiq + stubs_offset
+ ARM( swi SYS_ERROR0 )
+ THUMB( svc #0 )
+ THUMB( nop )
+ W(b) vector_und + stubs_offset
+ W(ldr) pc, .LCvswi + stubs_offset
+ W(b) vector_pabt + stubs_offset
+ W(b) vector_dabt + stubs_offset
+ W(b) vector_addrexcptn + stubs_offset
+ W(b) vector_irq + stubs_offset
+ W(b) vector_fiq + stubs_offset
.globl __vectors_end
__vectors_end:
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 7813ab782fd..807cfebb0f4 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -33,14 +33,7 @@ ret_fast_syscall:
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
- @ fast_restore_user_regs
- ldr r1, [sp, #S_OFF + S_PSR] @ get calling cpsr
- ldr lr, [sp, #S_OFF + S_PC]! @ get pc
- msr spsr_cxsf, r1 @ save in spsr_svc
- ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
- mov r0, r0
- add sp, sp, #S_FRAME_SIZE - S_PC
- movs pc, lr @ return & move spsr_svc into cpsr
+ restore_user_regs fast = 1, offset = S_OFF
UNWIND(.fnend )
/*
@@ -73,14 +66,7 @@ no_work_pending:
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
- @ slow_restore_user_regs
- ldr r1, [sp, #S_PSR] @ get calling cpsr
- ldr lr, [sp, #S_PC]! @ get pc
- msr spsr_cxsf, r1 @ save in spsr_svc
- ldmdb sp, {r0 - lr}^ @ get calling r0 - lr
- mov r0, r0
- add sp, sp, #S_FRAME_SIZE - S_PC
- movs pc, lr @ return & move spsr_svc into cpsr
+ restore_user_regs fast = 0, offset = 0
ENDPROC(ret_to_user)
/*
@@ -132,6 +118,25 @@ ftrace_call:
#else
+ENTRY(__gnu_mcount_nc)
+ stmdb sp!, {r0-r3, lr}
+ ldr r0, =ftrace_trace_function
+ ldr r2, [r0]
+ adr r0, ftrace_stub
+ cmp r0, r2
+ bne gnu_trace
+ ldmia sp!, {r0-r3, ip, lr}
+ bx ip
+
+gnu_trace:
+ ldr r1, [sp, #20] @ lr of instrumented routine
+ mov r0, lr
+ sub r0, r0, #MCOUNT_INSN_SIZE
+ mov lr, pc
+ mov pc, r2
+ ldmia sp!, {r0-r3, ip, lr}
+ bx ip
+
ENTRY(mcount)
stmdb sp!, {r0-r3, lr}
ldr r0, =ftrace_trace_function
@@ -182,8 +187,10 @@ ftrace_stub:
ENTRY(vector_swi)
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0 - r12
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling sp, lr
+ ARM( add r8, sp, #S_PC )
+ ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr
+ THUMB( mov r8, sp )
+ THUMB( store_user_sp_lr r8, r10, S_SP ) @ calling sp, lr
mrs r8, spsr @ called from non-FIQ mode, so ok.
str lr, [sp, #S_PC] @ Save calling PC
str r8, [sp, #S_PSR] @ Save CPSR
@@ -272,7 +279,7 @@ ENTRY(vector_swi)
bne __sys_trace
cmp scno, #NR_syscalls @ check upper syscall limit
- adr lr, ret_fast_syscall @ return address
+ adr lr, BSYM(ret_fast_syscall) @ return address
ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
add r1, sp, #S_OFF
@@ -293,7 +300,7 @@ __sys_trace:
mov r0, #0 @ trace entry [IP = 0]
bl syscall_trace
- adr lr, __sys_trace_return @ return address
+ adr lr, BSYM(__sys_trace_return) @ return address
mov scno, r0 @ syscall number (possibly new)
add r1, sp, #S_R0 + S_OFF @ pointer to regs
cmp scno, #NR_syscalls @ check upper syscall limit
@@ -373,16 +380,6 @@ sys_clone_wrapper:
b sys_clone
ENDPROC(sys_clone_wrapper)
-sys_sigsuspend_wrapper:
- add r3, sp, #S_OFF
- b sys_sigsuspend
-ENDPROC(sys_sigsuspend_wrapper)
-
-sys_rt_sigsuspend_wrapper:
- add r2, sp, #S_OFF
- b sys_rt_sigsuspend
-ENDPROC(sys_rt_sigsuspend_wrapper)
-
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_sigreturn
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 87ab4e15799..a4eaf4f920c 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -36,11 +36,6 @@
#endif
.endm
- .macro get_thread_info, rd
- mov \rd, sp, lsr #13
- mov \rd, \rd, lsl #13
- .endm
-
.macro alignment_trap, rtemp
#ifdef CONFIG_ALIGNMENT_TRAP
ldr \rtemp, .LCcralign
@@ -49,6 +44,93 @@
#endif
.endm
+ @
+ @ Store/load the USER SP and LR registers by switching to the SYS
+ @ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
+ @ available. Should only be called from SVC mode
+ @
+ .macro store_user_sp_lr, rd, rtemp, offset = 0
+ mrs \rtemp, cpsr
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch to the SYS mode
+
+ str sp, [\rd, #\offset] @ save sp_usr
+ str lr, [\rd, #\offset + 4] @ save lr_usr
+
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch back to the SVC mode
+ .endm
+
+ .macro load_user_sp_lr, rd, rtemp, offset = 0
+ mrs \rtemp, cpsr
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch to the SYS mode
+
+ ldr sp, [\rd, #\offset] @ load sp_usr
+ ldr lr, [\rd, #\offset + 4] @ load lr_usr
+
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch back to the SVC mode
+ .endm
+
+#ifndef CONFIG_THUMB2_KERNEL
+ .macro svc_exit, rpsr
+ msr spsr_cxsf, \rpsr
+ ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ .endm
+
+ .macro restore_user_regs, fast = 0, offset = 0
+ ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
+ ldr lr, [sp, #\offset + S_PC]! @ get pc
+ msr spsr_cxsf, r1 @ save in spsr_svc
+ .if \fast
+ ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
+ .else
+ ldmdb sp, {r0 - lr}^ @ get calling r0 - lr
+ .endif
+ add sp, sp, #S_FRAME_SIZE - S_PC
+ movs pc, lr @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_thread_info, rd
+ mov \rd, sp, lsr #13
+ mov \rd, \rd, lsl #13
+ .endm
+#else /* CONFIG_THUMB2_KERNEL */
+ .macro svc_exit, rpsr
+ ldr r0, [sp, #S_SP] @ top of the stack
+ ldr r1, [sp, #S_PC] @ return address
+ tst r0, #4 @ orig stack 8-byte aligned?
+ stmdb r0, {r1, \rpsr} @ rfe context
+ ldmia sp, {r0 - r12}
+ ldr lr, [sp, #S_LR]
+ addeq sp, sp, #S_FRAME_SIZE - 8 @ aligned
+ addne sp, sp, #S_FRAME_SIZE - 4 @ not aligned
+ rfeia sp!
+ .endm
+
+ .macro restore_user_regs, fast = 0, offset = 0
+ mov r2, sp
+ load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr
+ ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
+ ldr lr, [sp, #\offset + S_PC] @ get pc
+ add sp, sp, #\offset + S_SP
+ msr spsr_cxsf, r1 @ save in spsr_svc
+ .if \fast
+ ldmdb sp, {r1 - r12} @ get calling r1 - r12
+ .else
+ ldmdb sp, {r0 - r12} @ get calling r0 - r12
+ .endif
+ add sp, sp, #S_FRAME_SIZE - S_SP
+ movs pc, lr @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_thread_info, rd
+ mov \rd, sp
+ lsr \rd, \rd, #13
+ mov \rd, \rd, lsl #13
+ .endm
+#endif /* !CONFIG_THUMB2_KERNEL */
/*
* These are the registers used in the syscall handler, and allow us to
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 991952c644d..93ad576b2d7 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -14,6 +14,7 @@
#define ATAG_CORE 0x54410001
#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+ .align 2
.type __switch_data, %object
__switch_data:
.long __mmap_switched
@@ -51,7 +52,9 @@ __mmap_switched:
strcc fp, [r6],#4
bcc 1b
- ldmia r3, {r4, r5, r6, r7, sp}
+ ARM( ldmia r3, {r4, r5, r6, r7, sp})
+ THUMB( ldmia r3, {r4, r5, r6, r7} )
+ THUMB( ldr sp, [r3, #16] )
str r9, [r4] @ Save processor ID
str r1, [r5] @ Save machine type
str r2, [r6] @ Save atags pointer
@@ -155,7 +158,8 @@ ENDPROC(__error)
*/
__lookup_processor_type:
adr r3, 3f
- ldmda r3, {r5 - r7}
+ ldmia r3, {r5 - r7}
+ add r3, r3, #8
sub r3, r3, r7 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
add r6, r6, r3 @ physical address space
@@ -185,9 +189,10 @@ ENDPROC(lookup_processor_type)
* Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
* more information about the __proc_info and __arch_info structures.
*/
- .long __proc_info_begin
+ .align 2
+3: .long __proc_info_begin
.long __proc_info_end
-3: .long .
+4: .long .
.long __arch_info_begin
.long __arch_info_end
@@ -203,7 +208,7 @@ ENDPROC(lookup_processor_type)
* r5 = mach_info pointer in physical address space
*/
__lookup_machine_type:
- adr r3, 3b
+ adr r3, 4b
ldmia r3, {r4, r5, r6}
sub r3, r3, r4 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index cc87e1765ed..e5dfc2895e2 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -34,7 +34,7 @@
*/
.section ".text.head", "ax"
ENTRY(stext)
- msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+ setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled
#ifndef CONFIG_CPU_CP15
ldr r9, =CONFIG_PROCESSOR_ID
@@ -50,8 +50,10 @@ ENTRY(stext)
ldr r13, __switch_data @ address to jump to after
@ the initialization is done
- adr lr, __after_proc_init @ return (PIC) address
- add pc, r10, #PROCINFO_INITFUNC
+ adr lr, BSYM(__after_proc_init) @ return (PIC) address
+ ARM( add pc, r10, #PROCINFO_INITFUNC )
+ THUMB( add r12, r10, #PROCINFO_INITFUNC )
+ THUMB( mov pc, r12 )
ENDPROC(stext)
/*
@@ -59,7 +61,10 @@ ENDPROC(stext)
*/
__after_proc_init:
#ifdef CONFIG_CPU_CP15
- mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ /*
+ * CP15 system control register value returned in r0 from
+ * the CPU init function.
+ */
#ifdef CONFIG_ALIGNMENT_TRAP
orr r0, r0, #CR_A
#else
@@ -82,7 +87,8 @@ __after_proc_init:
mcr p15, 0, r0, c1, c0, 0 @ write control reg
#endif /* CONFIG_CPU_CP15 */
- mov pc, r13 @ clear the BSS and jump
+ mov r3, r13
+ mov pc, r3 @ clear the BSS and jump
@ to start_kernel
ENDPROC(__after_proc_init)
.ltorg
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 21e17dc94cb..38ccbe1d3b2 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -76,7 +76,7 @@
*/
.section ".text.head", "ax"
ENTRY(stext)
- msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+ setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
@@ -97,8 +97,10 @@ ENTRY(stext)
*/
ldr r13, __switch_data @ address to jump to after
@ mmu has been enabled
- adr lr, __enable_mmu @ return (PIC) address
- add pc, r10, #PROCINFO_INITFUNC
+ adr lr, BSYM(__enable_mmu) @ return (PIC) address
+ ARM( add pc, r10, #PROCINFO_INITFUNC )
+ THUMB( add r12, r10, #PROCINFO_INITFUNC )
+ THUMB( mov pc, r12 )
ENDPROC(stext)
#if defined(CONFIG_SMP)
@@ -110,7 +112,7 @@ ENTRY(secondary_startup)
* the processor type - there is no need to check the machine type
* as it has already been validated by the primary processor.
*/
- msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
@@ -121,12 +123,15 @@ ENTRY(secondary_startup)
* Use the page tables supplied from __cpu_up.
*/
adr r4, __secondary_data
- ldmia r4, {r5, r7, r13} @ address to jump to after
+ ldmia r4, {r5, r7, r12} @ address to jump to after
sub r4, r4, r5 @ mmu has been enabled
ldr r4, [r7, r4] @ get secondary_data.pgdir
- adr lr, __enable_mmu @ return address
- add pc, r10, #PROCINFO_INITFUNC @ initialise processor
- @ (return control reg)
+ adr lr, BSYM(__enable_mmu) @ return address
+ mov r13, r12 @ __secondary_switched address
+ ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor
+ @ (return control reg)
+ THUMB( add r12, r10, #PROCINFO_INITFUNC )
+ THUMB( mov pc, r12 )
ENDPROC(secondary_startup)
/*
@@ -193,8 +198,8 @@ __turn_mmu_on:
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mrc p15, 0, r3, c0, c0, 0 @ read id reg
mov r3, r3
- mov r3, r3
- mov pc, r13
+ mov r3, r13
+ mov pc, r3
ENDPROC(__turn_mmu_on)
@@ -235,7 +240,8 @@ __create_page_tables:
* will be removed by paging_init(). We use our current program
* counter to determine corresponding section base address.
*/
- mov r6, pc, lsr #20 @ start of kernel section
+ mov r6, pc
+ mov r6, r6, lsr #20 @ start of kernel section
orr r3, r7, r6, lsl #20 @ flags + kernel base
str r3, [r4, r6, lsl #2] @ identity mapping
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b7c3490eaa2..c9a8619f385 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -86,7 +86,7 @@ int show_interrupts(struct seq_file *p, void *v)
unlock:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS) {
-#ifdef CONFIG_ARCH_ACORN
+#ifdef CONFIG_FIQ
show_fiq_list(p, v);
#endif
#ifdef CONFIG_SMP
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index bac03c81489..f28c5e9c51e 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -102,6 +102,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
unsigned long loc;
Elf32_Sym *sym;
s32 offset;
+ u32 upper, lower, sign, j1, j2;
offset = ELF32_R_SYM(rel->r_info);
if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
@@ -184,6 +185,58 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
(offset & 0x0fff);
break;
+ case R_ARM_THM_CALL:
+ case R_ARM_THM_JUMP24:
+ upper = *(u16 *)loc;
+ lower = *(u16 *)(loc + 2);
+
+ /*
+ * 25 bit signed address range (Thumb-2 BL and B.W
+ * instructions):
+ * S:I1:I2:imm10:imm11:0
+ * where:
+ * S = upper[10] = offset[24]
+ * I1 = ~(J1 ^ S) = offset[23]
+ * I2 = ~(J2 ^ S) = offset[22]
+ * imm10 = upper[9:0] = offset[21:12]
+ * imm11 = lower[10:0] = offset[11:1]
+ * J1 = lower[13]
+ * J2 = lower[11]
+ */
+ sign = (upper >> 10) & 1;
+ j1 = (lower >> 13) & 1;
+ j2 = (lower >> 11) & 1;
+ offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) |
+ ((~(j2 ^ sign) & 1) << 22) |
+ ((upper & 0x03ff) << 12) |
+ ((lower & 0x07ff) << 1);
+ if (offset & 0x01000000)
+ offset -= 0x02000000;
+ offset += sym->st_value - loc;
+
+ /* only Thumb addresses allowed (no interworking) */
+ if (!(offset & 1) ||
+ offset <= (s32)0xff000000 ||
+ offset >= (s32)0x01000000) {
+ printk(KERN_ERR
+ "%s: relocation out of range, section "
+ "%d reloc %d sym '%s'\n", module->name,
+ relindex, i, strtab + sym->st_name);
+ return -ENOEXEC;
+ }
+
+ sign = (offset >> 24) & 1;
+ j1 = sign ^ (~(offset >> 23) & 1);
+ j2 = sign ^ (~(offset >> 22) & 1);
+ *(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
+ ((offset >> 12) & 0x03ff));
+ *(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
+ (j1 << 13) | (j2 << 11) |
+ ((offset >> 1) & 0x07ff));
+ upper = *(u16 *)loc;
+ lower = *(u16 *)(loc + 2);
+ break;
+
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 39196dff478..790fbee92ec 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -388,7 +388,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
regs.ARM_r2 = (unsigned long)fn;
regs.ARM_r3 = (unsigned long)kernel_thread_exit;
regs.ARM_pc = (unsigned long)kernel_thread_helper;
- regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
+ regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 89882a1d018..a2ea3854cb3 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -521,7 +521,13 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
return -EIO;
tmp = 0;
- if (off < sizeof(struct pt_regs))
+ if (off == PT_TEXT_ADDR)
+ tmp = tsk->mm->start_code;
+ else if (off == PT_DATA_ADDR)
+ tmp = tsk->mm->start_data;
+ else if (off == PT_TEXT_END_ADDR)
+ tmp = tsk->mm->end_code;
+ else if (off < sizeof(struct pt_regs))
tmp = get_user_reg(tsk, off >> 2);
return put_user(tmp, ret);
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
new file mode 100644
index 00000000000..df246da4cec
--- /dev/null
+++ b/arch/arm/kernel/return_address.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/kernel/return_address.c
+ *
+ * Copyright (C) 2009 Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ * for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+#include <linux/sched.h>
+
+#include <asm/stacktrace.h>
+
+struct return_address_data {
+ unsigned int level;
+ void *addr;
+};
+
+static int save_return_addr(struct stackframe *frame, void *d)
+{
+ struct return_address_data *data = d;
+
+ if (!data->level) {
+ data->addr = (void *)frame->lr;
+
+ return 1;
+ } else {
+ --data->level;
+ return 0;
+ }
+}
+
+void *return_address(unsigned int level)
+{
+ struct return_address_data data;
+ struct stackframe frame;
+ register unsigned long current_sp asm ("sp");
+
+ data.level = level + 1;
+
+ frame.fp = (unsigned long)__builtin_frame_address(0);
+ frame.sp = current_sp;
+ frame.lr = (unsigned long)__builtin_return_address(0);
+ frame.pc = (unsigned long)return_address;
+
+ walk_stackframe(&frame, save_return_addr, &data);
+
+ if (!data.level)
+ return data.addr;
+ else
+ return NULL;
+}
+
+#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
+
+#if defined(CONFIG_ARM_UNWIND)
+#warning "TODO: return_address should use unwind tables"
+#endif
+
+void *return_address(unsigned int level)
+{
+ return NULL;
+}
+
+#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
+
+EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index bc5e4128f9f..d4d4f77c91b 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -25,6 +25,7 @@
#include <linux/smp.h>
#include <linux/fs.h>
+#include <asm/unified.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/elf.h>
@@ -327,25 +328,38 @@ void cpu_init(void)
}
/*
+ * Define the placement constraint for the inline asm directive below.
+ * In Thumb-2, msr with an immediate value is not allowed.
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+#define PLC "r"
+#else
+#define PLC "I"
+#endif
+
+ /*
* setup stacks for re-entrant exception handlers
*/
__asm__ (
"msr cpsr_c, %1\n\t"
- "add sp, %0, %2\n\t"
+ "add r14, %0, %2\n\t"
+ "mov sp, r14\n\t"
"msr cpsr_c, %3\n\t"
- "add sp, %0, %4\n\t"
+ "add r14, %0, %4\n\t"
+ "mov sp, r14\n\t"
"msr cpsr_c, %5\n\t"
- "add sp, %0, %6\n\t"
+ "add r14, %0, %6\n\t"
+ "mov sp, r14\n\t"
"msr cpsr_c, %7"
:
: "r" (stk),
- "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+ PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
"I" (offsetof(struct stack, irq[0])),
- "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+ PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
"I" (offsetof(struct stack, abt[0])),
- "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+ PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
"I" (offsetof(struct stack, und[0])),
- "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+ PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
: "r14");
}
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index b76fe06d92e..1423a341978 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -48,57 +48,22 @@ const unsigned long sigreturn_codes[7] = {
MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
};
-static int do_signal(sigset_t *oldset, struct pt_regs * regs, int syscall);
-
/*
* atomically swap in the new signal mask, and wait for a signal.
*/
-asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask, struct pt_regs *regs)
+asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
{
- sigset_t saveset;
-
mask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
siginitset(&current->blocked, mask);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
- regs->ARM_r0 = -EINTR;
-
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(&saveset, regs, 0))
- return regs->ARM_r0;
- }
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
-
- spin_lock_irq(&current->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
- regs->ARM_r0 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(&saveset, regs, 0))
- return regs->ARM_r0;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_restore_sigmask();
+ return -ERESTARTNOHAND;
}
asmlinkage int
@@ -546,7 +511,7 @@ static inline void setup_syscall_restart(struct pt_regs *regs)
/*
* OK, we're invoking a handler
*/
-static void
+static int
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, int syscall)
@@ -597,7 +562,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
if (ret != 0) {
force_sigsegv(sig, tsk);
- return;
+ return ret;
}
/*
@@ -611,6 +576,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
+ return 0;
}
/*
@@ -622,7 +588,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
-static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
+static void do_signal(struct pt_regs *regs, int syscall)
{
struct k_sigaction ka;
siginfo_t info;
@@ -635,7 +601,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
* if so.
*/
if (!user_mode(regs))
- return 0;
+ return;
if (try_to_freeze())
goto no_signal;
@@ -644,9 +610,24 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
- handle_signal(signr, &ka, &info, oldset, regs, syscall);
+ sigset_t *oldset;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = &current->saved_sigmask;
+ else
+ oldset = &current->blocked;
+ if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
single_step_set(current);
- return 1;
+ return;
}
no_signal:
@@ -698,16 +679,23 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
regs->ARM_r0 == -ERESTARTNOINTR) {
setup_syscall_restart(regs);
}
+
+ /* If there's no signal to deliver, we just put the saved sigmask
+ * back.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+ }
}
single_step_set(current);
- return 0;
}
asmlinkage void
do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
{
if (thread_flags & _TIF_SIGPENDING)
- do_signal(&current->blocked, regs, syscall);
+ do_signal(regs, syscall);
if (thread_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 9f444e5cc16..20b7411e47f 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -21,7 +21,7 @@
* Note that with framepointer enabled, even the leaf functions have the same
* prologue and epilogue, therefore we can ignore the LR value in this case.
*/
-int unwind_frame(struct stackframe *frame)
+int notrace unwind_frame(struct stackframe *frame)
{
unsigned long high, low;
unsigned long fp = frame->fp;
@@ -43,7 +43,7 @@ int unwind_frame(struct stackframe *frame)
}
#endif
-void walk_stackframe(struct stackframe *frame,
+void notrace walk_stackframe(struct stackframe *frame,
int (*fn)(struct stackframe *, void *), void *data)
{
while (1) {
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index dd56e11f339..39baf1128bf 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -62,7 +62,11 @@ struct unwind_ctrl_block {
};
enum regs {
+#ifdef CONFIG_THUMB2_KERNEL
+ FP = 7,
+#else
FP = 11,
+#endif
SP = 13,
LR = 14,
PC = 15
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
index 1154d924080..638deb13da1 100644
--- a/arch/arm/lib/ashldi3.S
+++ b/arch/arm/lib/ashldi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsl)
rsb ip, r2, #32
movmi ah, ah, lsl r2
movpl ah, al, lsl r3
- orrmi ah, ah, al, lsr ip
+ ARM( orrmi ah, ah, al, lsr ip )
+ THUMB( lsrmi r3, al, ip )
+ THUMB( orrmi ah, ah, r3 )
mov al, al, lsl r2
mov pc, lr
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
index 9f8b35572f8..015e8aa5a1d 100644
--- a/arch/arm/lib/ashrdi3.S
+++ b/arch/arm/lib/ashrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_lasr)
rsb ip, r2, #32
movmi al, al, lsr r2
movpl al, ah, asr r3
- orrmi al, al, ah, lsl ip
+ ARM( orrmi al, al, ah, lsl ip )
+ THUMB( lslmi r3, ah, ip )
+ THUMB( orrmi al, al, r3 )
mov ah, ah, asr r2
mov pc, lr
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index b0951d0e8b2..aaf7220d9e3 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -38,7 +38,9 @@ ENDPROC(c_backtrace)
beq no_frame @ we have no stack frames
tst r1, #0x10 @ 26 or 32-bit mode?
- moveq mask, #0xfc000003 @ mask for 26-bit
+ ARM( moveq mask, #0xfc000003 )
+ THUMB( moveq mask, #0xfc000000 )
+ THUMB( orreq mask, #0x03 )
movne mask, #0 @ mask for 32-bit
1: stmfd sp!, {pc} @ calculate offset of PC stored
@@ -126,7 +128,9 @@ ENDPROC(c_backtrace)
mov reg, #10
mov r7, #0
1: mov r3, #1
- tst instr, r3, lsl reg
+ ARM( tst instr, r3, lsl reg )
+ THUMB( lsl r3, reg )
+ THUMB( tst instr, r3 )
beq 2f
add r7, r7, #1
teq r7, #6
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index c7f2627385e..d42252918bf 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -60,8 +60,8 @@
tst r2, r0, lsl r3
\instr r2, r2, r0, lsl r3
\store r2, [r1]
- restore_irqs ip
moveq r0, #0
+ restore_irqs ip
mov pc, lr
.endm
#endif
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 844f56785eb..1279abd8b88 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -27,21 +27,20 @@ WEAK(__clear_user)
ands ip, r0, #3
beq 1f
cmp ip, #2
-USER( strbt r2, [r0], #1)
-USER( strlebt r2, [r0], #1)
-USER( strltbt r2, [r0], #1)
+ strusr r2, r0, 1
+ strusr r2, r0, 1, le
+ strusr r2, r0, 1, lt
rsb ip, ip, #4
sub r1, r1, ip @ 7 6 5 4 3 2 1
1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7
-USER( strplt r2, [r0], #4)
-USER( strplt r2, [r0], #4)
+ strusr r2, r0, 4, pl, rept=2
bpl 1b
adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3
-USER( strplt r2, [r0], #4)
+ strusr r2, r0, 4, pl
2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x
-USER( strnebt r2, [r0], #1)
-USER( strnebt r2, [r0], #1)
+ strusr r2, r0, 1, ne, rept=2
tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1
+ it ne @ explicit IT needed for the label
USER( strnebt r2, [r0])
mov r0, #0
ldmfd sp!, {r1, pc}
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 56799a165cc..e4fe124aced 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -33,11 +33,15 @@
* Number of bytes NOT copied.
*/
+#ifndef CONFIG_THUMB2_KERNEL
+#define LDR1W_SHIFT 0
+#else
+#define LDR1W_SHIFT 1
+#endif
+#define STR1W_SHIFT 0
+
.macro ldr1w ptr reg abort
-100: ldrt \reg, [\ptr], #4
- .section __ex_table, "a"
- .long 100b, \abort
- .previous
+ ldrusr \reg, \ptr, 4, abort=\abort
.endm
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -53,14 +57,11 @@
.endm
.macro ldr1b ptr reg cond=al abort
-100: ldr\cond\()bt \reg, [\ptr], #1
- .section __ex_table, "a"
- .long 100b, \abort
- .previous
+ ldrusr \reg, \ptr, 1, \cond, abort=\abort
.endm
.macro str1w ptr reg abort
- str \reg, [\ptr], #4
+ W(str) \reg, [\ptr], #4
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 139cce64605..805e3f8fb00 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -57,6 +57,13 @@
*
* Restore registers with the values previously saved with the
* 'preserv' macro. Called upon code termination.
+ *
+ * LDR1W_SHIFT
+ * STR1W_SHIFT
+ *
+ * Correction to be applied to the "ip" register when branching into
+ * the ldr1w or str1w instructions (some of these macros may expand to
+ * than one 32bit instruction in Thumb-2)
*/
@@ -99,9 +106,15 @@
5: ands ip, r2, #28
rsb ip, ip, #32
+#if LDR1W_SHIFT > 0
+ lsl ip, ip, #LDR1W_SHIFT
+#endif
addne pc, pc, ip @ C is always clear here
b 7f
-6: nop
+6:
+ .rept (1 << LDR1W_SHIFT)
+ W(nop)
+ .endr
ldr1w r1, r3, abort=20f
ldr1w r1, r4, abort=20f
ldr1w r1, r5, abort=20f
@@ -110,9 +123,16 @@
ldr1w r1, r8, abort=20f
ldr1w r1, lr, abort=20f
+#if LDR1W_SHIFT < STR1W_SHIFT
+ lsl ip, ip, #STR1W_SHIFT - LDR1W_SHIFT
+#elif LDR1W_SHIFT > STR1W_SHIFT
+ lsr ip, ip, #LDR1W_SHIFT - STR1W_SHIFT
+#endif
add pc, pc, ip
nop
- nop
+ .rept (1 << STR1W_SHIFT)
+ W(nop)
+ .endr
str1w r0, r3, abort=20f
str1w r0, r4, abort=20f
str1w r0, r5, abort=20f
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 878820f0a32..1a71e158444 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -33,8 +33,15 @@
* Number of bytes NOT copied.
*/
+#define LDR1W_SHIFT 0
+#ifndef CONFIG_THUMB2_KERNEL
+#define STR1W_SHIFT 0
+#else
+#define STR1W_SHIFT 1
+#endif
+
.macro ldr1w ptr reg abort
- ldr \reg, [\ptr], #4
+ W(ldr) \reg, [\ptr], #4
.endm
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -50,10 +57,7 @@
.endm
.macro str1w ptr reg abort
-100: strt \reg, [\ptr], #4
- .section __ex_table, "a"
- .long 100b, \abort
- .previous
+ strusr \reg, \ptr, 4, abort=\abort
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
@@ -68,10 +72,7 @@
.endm
.macro str1b ptr reg cond=al abort
-100: str\cond\()bt \reg, [\ptr], #1
- .section __ex_table, "a"
- .long 100b, \abort
- .previous
+ strusr \reg, \ptr, 1, \cond, abort=\abort
.endm
.macro enter reg1 reg2
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 14677fb4b0c..fd0e9dcd9fd 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -26,50 +26,28 @@
.endm
.macro load1b, reg1
-9999: ldrbt \reg1, [r0], $1
- .section __ex_table, "a"
- .align 3
- .long 9999b, 6001f
- .previous
+ ldrusr \reg1, r0, 1
.endm
.macro load2b, reg1, reg2
-9999: ldrbt \reg1, [r0], $1
-9998: ldrbt \reg2, [r0], $1
- .section __ex_table, "a"
- .long 9999b, 6001f
- .long 9998b, 6001f
- .previous
+ ldrusr \reg1, r0, 1
+ ldrusr \reg2, r0, 1
.endm
.macro load1l, reg1
-9999: ldrt \reg1, [r0], $4
- .section __ex_table, "a"
- .align 3
- .long 9999b, 6001f
- .previous
+ ldrusr \reg1, r0, 4
.endm
.macro load2l, reg1, reg2
-9999: ldrt \reg1, [r0], $4
-9998: ldrt \reg2, [r0], $4
- .section __ex_table, "a"
- .long 9999b, 6001f
- .long 9998b, 6001f
- .previous
+ ldrusr \reg1, r0, 4
+ ldrusr \reg2, r0, 4
.endm
.macro load4l, reg1, reg2, reg3, reg4
-9999: ldrt \reg1, [r0], $4
-9998: ldrt \reg2, [r0], $4
-9997: ldrt \reg3, [r0], $4
-9996: ldrt \reg4, [r0], $4
- .section __ex_table, "a"
- .long 9999b, 6001f
- .long 9998b, 6001f
- .long 9997b, 6001f
- .long 9996b, 6001f
- .previous
+ ldrusr \reg1, r0, 4
+ ldrusr \reg2, r0, 4
+ ldrusr \reg3, r0, 4
+ ldrusr \reg4, r0, 4
.endm
/*
@@ -92,14 +70,14 @@
*/
.section .fixup,"ax"
.align 4
-6001: mov r4, #-EFAULT
+9001: mov r4, #-EFAULT
ldr r5, [fp, #4] @ *err_ptr
str r4, [r5]
ldmia sp, {r1, r2} @ retrieve dst, len
add r2, r2, r1
mov r0, #0 @ zero the buffer
-6002: teq r2, r1
+9002: teq r2, r1
strneb r0, [r1], #1
- bne 6002b
+ bne 9002b
load_regs
.previous
diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S
index 1425e789ba8..faa7748142d 100644
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@@ -177,7 +177,9 @@ ENTRY(__do_div64)
mov yh, xh, lsr ip
mov yl, xl, lsr ip
rsb ip, ip, #32
- orr yl, yl, xh, lsl ip
+ ARM( orr yl, yl, xh, lsl ip )
+ THUMB( lsl xh, xh, ip )
+ THUMB( orr yl, yl, xh )
mov xh, xl, lsl ip
mov xh, xh, lsr ip
mov pc, lr
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 8c4defc4f3c..1e4cbd4e7be 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -25,7 +25,10 @@ ENTRY(_find_first_zero_bit_le)
teq r1, #0
beq 3f
mov r2, #0
-1: ldrb r3, [r0, r2, lsr #3]
+1:
+ ARM( ldrb r3, [r0, r2, lsr #3] )
+ THUMB( lsr r3, r2, #3 )
+ THUMB( ldrb r3, [r0, r3] )
eors r3, r3, #0xff @ invert bits
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
@@ -44,7 +47,9 @@ ENTRY(_find_next_zero_bit_le)
beq 3b
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
- ldrb r3, [r0, r2, lsr #3]
+ ARM( ldrb r3, [r0, r2, lsr #3] )
+ THUMB( lsr r3, r2, #3 )
+ THUMB( ldrb r3, [r0, r3] )
eor r3, r3, #0xff @ now looking for a 1 bit
movs r3, r3, lsr ip @ shift off unused bits
bne .L_found
@@ -61,7 +66,10 @@ ENTRY(_find_first_bit_le)
teq r1, #0
beq 3f
mov r2, #0
-1: ldrb r3, [r0, r2, lsr #3]
+1:
+ ARM( ldrb r3, [r0, r2, lsr #3] )
+ THUMB( lsr r3, r2, #3 )
+ THUMB( ldrb r3, [r0, r3] )
movs r3, r3
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
@@ -80,7 +88,9 @@ ENTRY(_find_next_bit_le)
beq 3b
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
- ldrb r3, [r0, r2, lsr #3]
+ ARM( ldrb r3, [r0, r2, lsr #3] )
+ THUMB( lsr r3, r2, #3 )
+ THUMB( ldrb r3, [r0, r3] )
movs r3, r3, lsr ip @ shift off unused bits
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
@@ -95,7 +105,9 @@ ENTRY(_find_first_zero_bit_be)
beq 3f
mov r2, #0
1: eor r3, r2, #0x18 @ big endian byte ordering
- ldrb r3, [r0, r3, lsr #3]
+ ARM( ldrb r3, [r0, r3, lsr #3] )
+ THUMB( lsr r3, #3 )
+ THUMB( ldrb r3, [r0, r3] )
eors r3, r3, #0xff @ invert bits
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
@@ -111,7 +123,9 @@ ENTRY(_find_next_zero_bit_be)
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
eor r3, r2, #0x18 @ big endian byte ordering
- ldrb r3, [r0, r3, lsr #3]
+ ARM( ldrb r3, [r0, r3, lsr #3] )
+ THUMB( lsr r3, #3 )
+ THUMB( ldrb r3, [r0, r3] )
eor r3, r3, #0xff @ now looking for a 1 bit
movs r3, r3, lsr ip @ shift off unused bits
bne .L_found
@@ -125,7 +139,9 @@ ENTRY(_find_first_bit_be)
beq 3f
mov r2, #0
1: eor r3, r2, #0x18 @ big endian byte ordering
- ldrb r3, [r0, r3, lsr #3]
+ ARM( ldrb r3, [r0, r3, lsr #3] )
+ THUMB( lsr r3, #3 )
+ THUMB( ldrb r3, [r0, r3] )
movs r3, r3
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
@@ -141,7 +157,9 @@ ENTRY(_find_next_bit_be)
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
eor r3, r2, #0x18 @ big endian byte ordering
- ldrb r3, [r0, r3, lsr #3]
+ ARM( ldrb r3, [r0, r3, lsr #3] )
+ THUMB( lsr r3, #3 )
+ THUMB( ldrb r3, [r0, r3] )
movs r3, r3, lsr ip @ shift off unused bits
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 6763088b760..a1814d92712 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -36,8 +36,13 @@ ENTRY(__get_user_1)
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
+#ifdef CONFIG_THUMB2_KERNEL
+2: ldrbt r2, [r0]
+3: ldrbt r3, [r0, #1]
+#else
2: ldrbt r2, [r0], #1
3: ldrbt r3, [r0]
+#endif
#ifndef __ARMEB__
orr r2, r2, r3, lsl #8
#else
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index d6585612c86..ff4f71b579e 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -75,7 +75,10 @@ ENTRY(__raw_writesw)
#endif
.Loutsw_noalign:
- ldr r3, [r1, -r3]!
+ ARM( ldr r3, [r1, -r3]! )
+ THUMB( rsb r3, r3, #0 )
+ THUMB( ldr r3, [r1, r3] )
+ THUMB( sub r1, r3 )
subcs r2, r2, #1
bcs 2f
subs r2, r2, #2
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
index 99ea338bf87..f83d449141f 100644
--- a/arch/arm/lib/lshrdi3.S
+++ b/arch/arm/lib/lshrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsr)
rsb ip, r2, #32
movmi al, al, lsr r2
movpl al, ah, lsr r3
- orrmi al, al, ah, lsl ip
+ ARM( orrmi al, al, ah, lsl ip )
+ THUMB( lslmi r3, ah, ip )
+ THUMB( orrmi al, al, r3 )
mov ah, ah, lsr r2
mov pc, lr
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index e0d002641d3..a9b9e2287a0 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -13,8 +13,11 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
+#define LDR1W_SHIFT 0
+#define STR1W_SHIFT 0
+
.macro ldr1w ptr reg abort
- ldr \reg, [\ptr], #4
+ W(ldr) \reg, [\ptr], #4
.endm
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -30,7 +33,7 @@
.endm
.macro str1w ptr reg abort
- str \reg, [\ptr], #4
+ W(str) \reg, [\ptr], #4
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 12549187088..5025c863713 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -75,24 +75,24 @@ ENTRY(memmove)
addne pc, pc, ip @ C is always clear here
b 7f
6: nop
- ldr r3, [r1, #-4]!
- ldr r4, [r1, #-4]!
- ldr r5, [r1, #-4]!
- ldr r6, [r1, #-4]!
- ldr r7, [r1, #-4]!
- ldr r8, [r1, #-4]!
- ldr lr, [r1, #-4]!
+ W(ldr) r3, [r1, #-4]!
+ W(ldr) r4, [r1, #-4]!
+ W(ldr) r5, [r1, #-4]!
+ W(ldr) r6, [r1, #-4]!
+ W(ldr) r7, [r1, #-4]!
+ W(ldr) r8, [r1, #-4]!
+ W(ldr) lr, [r1, #-4]!
add pc, pc, ip
nop
nop
- str r3, [r0, #-4]!
- str r4, [r0, #-4]!
- str r5, [r0, #-4]!
- str r6, [r0, #-4]!
- str r7, [r0, #-4]!
- str r8, [r0, #-4]!
- str lr, [r0, #-4]!
+ W(str) r3, [r0, #-4]!
+ W(str) r4, [r0, #-4]!
+ W(str) r5, [r0, #-4]!
+ W(str) r6, [r0, #-4]!
+ W(str) r7, [r0, #-4]!
+ W(str) r8, [r0, #-4]!
+ W(str) lr, [r0, #-4]!
CALGN( bcs 2b )
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 864f3c1c4f1..02fedbf07c0 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -37,6 +37,15 @@ ENDPROC(__put_user_1)
ENTRY(__put_user_2)
mov ip, r2, lsr #8
+#ifdef CONFIG_THUMB2_KERNEL
+#ifndef __ARMEB__
+2: strbt r2, [r0]
+3: strbt ip, [r0, #1]
+#else
+2: strbt ip, [r0]
+3: strbt r2, [r0, #1]
+#endif
+#else /* !CONFIG_THUMB2_KERNEL */
#ifndef __ARMEB__
2: strbt r2, [r0], #1
3: strbt ip, [r0]
@@ -44,6 +53,7 @@ ENTRY(__put_user_2)
2: strbt ip, [r0], #1
3: strbt r2, [r0]
#endif
+#endif /* CONFIG_THUMB2_KERNEL */
mov r0, #0
mov pc, lr
ENDPROC(__put_user_2)
@@ -55,8 +65,13 @@ ENTRY(__put_user_4)
ENDPROC(__put_user_4)
ENTRY(__put_user_8)
+#ifdef CONFIG_THUMB2_KERNEL
+5: strt r2, [r0]
+6: strt r3, [r0, #4]
+#else
5: strt r2, [r0], #4
6: strt r3, [r0]
+#endif
mov r0, #0
mov pc, lr
ENDPROC(__put_user_8)
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index a16fb208c84..09b548cac1a 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -187,6 +187,7 @@ ENTRY(sha_transform)
ENDPROC(sha_transform)
+ .align 2
.L_sha_K:
.word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
@@ -195,6 +196,7 @@ ENDPROC(sha_transform)
* void sha_init(__u32 *buf)
*/
+ .align 2
.L_sha_initial_digest:
.word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 330373c26dd..1c9814f346c 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -23,7 +23,7 @@
ENTRY(__strncpy_from_user)
mov ip, r1
1: subs r2, r2, #1
-USER( ldrplbt r3, [r1], #1)
+ ldrusr r3, r1, 1, pl
bmi 2f
strb r3, [r0], #1
teq r3, #0
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 90bb9d02083..7855b290665 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -23,7 +23,7 @@
ENTRY(__strnlen_user)
mov r2, r0
1:
-USER( ldrbt r3, [r0], #1)
+ ldrusr r3, r0, 1
teq r3, #0
beq 2f
subs r1, r1, #1
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 323b47f2b52..a24d824c428 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -23,6 +23,12 @@ config ARCH_AT91SAM9261
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+config ARCH_AT91SAM9G10
+ bool "AT91SAM9G10"
+ select CPU_ARM926T
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select CPU_ARM926T
@@ -41,6 +47,12 @@ config ARCH_AT91SAM9G20
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+config ARCH_AT91SAM9G45
+ bool "AT91SAM9G45"
+ select CPU_ARM926T
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
config ARCH_AT91CAP9
bool "AT91CAP9"
select CPU_ARM926T
@@ -144,6 +156,13 @@ config MACH_YL9200
help
Select this if you are using the ucDragon YL-9200 board.
+config MACH_CPUAT91
+ bool "Eukrea CPUAT91"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using the Eukrea Electromatique's
+ CPUAT91 board <http://www.eukrea.com/>.
+
endif
# ----------------------------------------------------------
@@ -205,6 +224,13 @@ config MACH_QIL_A9260
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
+config MACH_CPU9260
+ bool "Eukrea CPU9260 board"
+ depends on ARCH_AT91SAM9260
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9260 Board <http://www.eukrea.com/>
+
endif
# ----------------------------------------------------------
@@ -224,6 +250,21 @@ endif
# ----------------------------------------------------------
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+ bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9G10
+ help
+ Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
if ARCH_AT91SAM9263
comment "AT91SAM9263 Board Type"
@@ -276,6 +317,29 @@ config MACH_AT91SAM9G20EK
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+config MACH_CPU9G20
+ bool "Eukrea CPU9G20 board"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9G20 Board <http://www.eukrea.com/>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9G45EKES
+ bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+ depends on ARCH_AT91SAM9G45
+ help
+ Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
+ "ES" at the end of the name means that this board is an
+ Engineering Sample.
+
endif
# ----------------------------------------------------------
@@ -315,13 +379,13 @@ comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
help
Enable support for the DataFlash card.
config MTD_NAND_ATMEL_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
@@ -383,7 +447,7 @@ config AT91_EARLY_USART2
config AT91_EARLY_USART3
bool "USART3"
- depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+ depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
config AT91_EARLY_USART4
bool "USART4"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c69ff237fd1..a6ed015d82e 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,9 +13,11 @@ obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+ obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
@@ -32,6 +34,7 @@ obj-$(CONFIG_MACH_KAFA) += board-kafa.o
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
+obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -40,9 +43,11 @@ obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
+obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
@@ -54,6 +59,10 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
# AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
+
+# AT91SAM9G45 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 071a2506a69..3462b815054 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -7,6 +7,10 @@ ifeq ($(CONFIG_ARCH_AT91CAP9),y)
zreladdr-y := 0x70008000
params_phys-y := 0x70000100
initrd_phys-y := 0x70410000
+else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+ zreladdr-y := 0x70008000
+params_phys-y := 0x70000100
+initrd_phys-y := 0x70410000
else
zreladdr-y := 0x20008000
params_phys-y := 0x20000100
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index d74c9ac007e..ee4ea0e720c 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1113,6 +1113,122 @@ void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
+/* --------------------------------------------------------------------
+ * CF/IDE
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
+ defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_4,
+ .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cf0_device = {
+ .id = 0,
+ .dev = {
+ .platform_data = &cf0_data,
+ },
+ .resource = cf0_resources,
+ .num_resources = ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_5,
+ .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cf1_device = {
+ .id = 1,
+ .dev = {
+ .platform_data = &cf1_data,
+ },
+ .resource = cf1_resources,
+ .num_resources = ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+ struct platform_device *pdev;
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+
+ switch (data->chipselect) {
+ case 4:
+ at91_set_multi_drive(AT91_PIN_PC8, 0);
+ at91_set_A_periph(AT91_PIN_PC8, 0);
+ csa |= AT91_MATRIX_CS4A_SMC_CF1;
+ cf0_data = *data;
+ pdev = &cf0_device;
+ break;
+ case 5:
+ at91_set_multi_drive(AT91_PIN_PC9, 0);
+ at91_set_A_periph(AT91_PIN_PC9, 0);
+ csa |= AT91_MATRIX_CS5A_SMC_CF2;
+ cf1_data = *data;
+ pdev = &cf1_device;
+ break;
+ default:
+ printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+ data->chipselect);
+ return;
+ }
+
+ at91_sys_write(AT91_MATRIX_EBICSA, csa);
+
+ if (data->rst_pin) {
+ at91_set_multi_drive(data->rst_pin, 0);
+ at91_set_gpio_output(data->rst_pin, 1);
+ }
+
+ if (data->irq_pin) {
+ at91_set_gpio_input(data->irq_pin, 0);
+ at91_set_deglitch(data->irq_pin, 1);
+ }
+
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 0);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+
+ at91_set_B_periph(AT91_PIN_PC6, 0); /* CFCE1 */
+ at91_set_B_periph(AT91_PIN_PC7, 0); /* CFCE2 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */
+ at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */
+
+ if (data->flags & AT91_CF_TRUE_IDE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+ pdev->name = "pata_at91";
+#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+ pdev->name = "at91_ide";
+#else
+#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#endif
+ else
+ pdev->name = "at91_cf";
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_cf(struct at91_cf_data * data) {}
+#endif
/* -------------------------------------------------------------------- */
/*
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 3acd7d7e6a4..4ecf37996c7 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -16,6 +16,7 @@
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/cpu.h>
#include <mach/at91sam9261.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
@@ -30,7 +31,11 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
- }, {
+ },
+};
+
+static struct map_desc at91sam9261_sram_desc[] __initdata = {
+ {
.virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
.pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE),
.length = AT91SAM9261_SRAM_SIZE,
@@ -38,6 +43,15 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
},
};
+static struct map_desc at91sam9g10_sram_desc[] __initdata = {
+ {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9G10_SRAM_BASE),
+ .length = AT91SAM9G10_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -263,6 +277,12 @@ void __init at91sam9261_initialize(unsigned long main_clock)
/* Map peripherals */
iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
+ if (cpu_is_at91sam9g10())
+ iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
+ else
+ iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+
+
at91_arch_reset = at91sam9261_reset;
pm_power_off = at91sam9261_poweroff;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b7f23324231..55719a97427 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -707,9 +707,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
* AC97
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
static struct resource ac97_resources[] = {
[0] = {
@@ -725,8 +725,8 @@ static struct resource ac97_resources[] = {
};
static struct platform_device at91sam9263_ac97_device = {
- .name = "ac97c",
- .id = 1,
+ .name = "atmel_ac97c",
+ .id = 0,
.dev = {
.dma_mask = &ac97_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
@@ -736,7 +736,7 @@ static struct platform_device at91sam9263_ac97_device = {
.num_resources = ARRAY_SIZE(ac97_resources),
};
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
{
if (!data)
return;
@@ -750,11 +750,11 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
if (data->reset_pin)
at91_set_gpio_output(data->reset_pin, 0);
- ac97_data = *ek_data;
+ ac97_data = *data;
platform_device_register(&at91sam9263_ac97_device);
}
#else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
new file mode 100644
index 00000000000..85166b7e69a
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -0,0 +1,360 @@
+/*
+ * Chip-specific setup code for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9g45_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9G45_SRAM_BASE),
+ .length = AT91SAM9G45_SRAM_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioDE_clk = {
+ .name = "pioDE_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIODE,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_MCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+ .name = "tcb_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+ .name = "pwm_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PWMC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tsc_clk = {
+ .name = "tsc_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TSC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_DMA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+ .name = "uhphs_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_UHPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+ .name = "ac97_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_AC97C,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+ .name = "udphs_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_UDPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_MCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+/* One additional fake clock for ohci */
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 0,
+ .type = CLK_TYPE_PERIPHERAL,
+ .parent = &uhphs_clk,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &pioDE_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &usart3_clk,
+ &mmc0_clk,
+ &twi0_clk,
+ &twi1_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &tcb_clk,
+ &pwm_clk,
+ &tsc_clk,
+ &dma_clk,
+ &uhphs_clk,
+ &lcdc_clk,
+ &ac97_clk,
+ &macb_clk,
+ &isi_clk,
+ &udphs_clk,
+ &mmc1_clk,
+ // irq0
+ &ohci_clk,
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+
+static void __init at91sam9g45_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9g45_gpio[] = {
+ {
+ .id = AT91SAM9G45_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIODE,
+ .offset = AT91_PIOD,
+ .clock = &pioDE_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIODE,
+ .offset = AT91_PIOE,
+ .clock = &pioDE_clk,
+ }
+};
+
+static void at91sam9g45_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+static void at91sam9g45_poweroff(void)
+{
+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9G45 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9g45_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+
+ at91_arch_reset = at91sam9g45_reset;
+ pm_power_off = at91sam9g45_poweroff;
+ at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9g45_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9g45_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller D and E */
+ 0,
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 5, /* USART 3 */
+ 0, /* Multimedia Card Interface 0 */
+ 6, /* Two-Wire Interface 0 */
+ 6, /* Two-Wire Interface 1 */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */
+ 0, /* Pulse Width Modulation Controller */
+ 0, /* Touch Screen Controller */
+ 0, /* DMA Controller */
+ 2, /* USB Host High Speed port */
+ 3, /* LDC Controller */
+ 5, /* AC97 Controller */
+ 3, /* Ethernet */
+ 0, /* Image Sensor Interface */
+ 2, /* USB Device High speed port */
+ 0,
+ 0, /* Multimedia Card Interface 1 */
+ 0,
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+};
+
+void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9g45_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
new file mode 100644
index 00000000000..d746e8621bc
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -0,0 +1,1230 @@
+/*
+ * On-Chip devices setup code for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+
+#include <linux/fb.h>
+#include <video/atmel_lcdc.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91sam9g45_matrix.h>
+#include <mach/at91sam9_smc.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ * USB Host (OHCI)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ohci_data;
+
+static struct resource usbh_ohci_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_OHCI_BASE,
+ .end = AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_UHPHS,
+ .end = AT91SAM9G45_ID_UHPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_ohci_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_ohci_data,
+ },
+ .resource = usbh_ohci_resources,
+ .num_resources = ARRAY_SIZE(usbh_ohci_resources),
+};
+
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_ohci_data = *data;
+ platform_device_register(&at91_usbh_ohci_device);
+}
+#else
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+static struct resource usba_udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_UDPHS_FIFO,
+ .end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_BASE_UDPHS,
+ .end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91SAM9G45_ID_UDPHS,
+ .end = AT91SAM9G45_ID_UDPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
+ [idx] = { \
+ .name = nam, \
+ .index = idx, \
+ .fifo_size = maxpkt, \
+ .nr_banks = maxbk, \
+ .can_dma = dma, \
+ .can_isoc = isoc, \
+ }
+
+static struct usba_ep_data usba_udc_ep[] __initdata = {
+ EP("ep0", 0, 64, 1, 0, 0),
+ EP("ep1", 1, 1024, 2, 1, 1),
+ EP("ep2", 2, 1024, 2, 1, 1),
+ EP("ep3", 3, 1024, 3, 1, 0),
+ EP("ep4", 4, 1024, 3, 1, 0),
+ EP("ep5", 5, 1024, 3, 1, 1),
+ EP("ep6", 6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+ struct usba_platform_data pdata;
+ struct usba_ep_data ep[7];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+ .name = "atmel_usba_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &usba_udc_data.pdata,
+ },
+ .resource = usba_udc_resources,
+ .num_resources = ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+ usba_udc_data.pdata.vbus_pin = -EINVAL;
+ usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+ memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+ if (data && data->vbus_pin > 0) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ /* Clocks */
+ at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+ at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+ platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_EMAC,
+ .end = AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_EMAC,
+ .end = AT91SAM9G45_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &eth_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91sam9g45_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ [0] = {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_BASE_SYS + AT91_ECC,
+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9g45_nand_device = {
+ .name = "atmel_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91sam9g45_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+static struct i2c_gpio_platform_data pdata_i2c0 = {
+ .sda_pin = AT91_PIN_PA20,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA21,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev.platform_data = &pdata_i2c0,
+};
+
+static struct i2c_gpio_platform_data pdata_i2c1 = {
+ .sda_pin = AT91_PIN_PB10,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PB11,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+ .name = "i2c-gpio",
+ .id = 1,
+ .dev.platform_data = &pdata_i2c1,
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+ i2c_register_board_info(i2c_id, devices, nr_devices);
+
+ if (i2c_id == 0) {
+ at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+ platform_device_register(&at91sam9g45_twi0_device);
+ } else {
+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+ platform_device_register(&at91sam9g45_twi1_device);
+ }
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+static struct resource twi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TWI0,
+ .end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TWI0,
+ .end = AT91SAM9G45_ID_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+ .name = "at91_i2c",
+ .id = 0,
+ .resource = twi0_resources,
+ .num_resources = ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TWI1,
+ .end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TWI1,
+ .end = AT91SAM9G45_ID_TWI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+ .name = "at91_i2c",
+ .id = 1,
+ .resource = twi1_resources,
+ .num_resources = ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+ i2c_register_board_info(i2c_id, devices, nr_devices);
+
+ /* pins used for TWI interface */
+ if (i2c_id == 0) {
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+ platform_device_register(&at91sam9g45_twi0_device);
+ } else {
+ at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+ platform_device_register(&at91sam9g45_twi1_device);
+ }
+}
+#else
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SPI0,
+ .end = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SPI0,
+ .end = AT91SAM9G45_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SPI1,
+ .end = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SPI1,
+ .end = AT91SAM9G45_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91sam9g45_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91sam9g45_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_LCDC_BASE,
+ .end = AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_LCDC,
+ .end = AT91SAM9G45_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_lcdc_device = {
+ .name = "atmel_lcdfb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
+
+ at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
+ at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PE6, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
+ at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
+ at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
+ at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
+ at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PE20, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+static struct resource tcb0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TCB0,
+ .end = AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TCB,
+ .end = AT91SAM9G45_ID_TCB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_tcb0_device = {
+ .name = "atmel_tcb",
+ .id = 0,
+ .resource = tcb0_resources,
+ .num_resources = ARRAY_SIZE(tcb0_resources),
+};
+
+/* TCB1 begins with TC3 */
+static struct resource tcb1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TCB1,
+ .end = AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TCB,
+ .end = AT91SAM9G45_ID_TCB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_tcb1_device = {
+ .name = "atmel_tcb",
+ .id = 1,
+ .resource = tcb1_resources,
+ .num_resources = ARRAY_SIZE(tcb1_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+ /* this chip has one clock and irq for all six TC channels */
+ at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+ platform_device_register(&at91sam9g45_tcb0_device);
+ at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+ platform_device_register(&at91sam9g45_tcb1_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTC
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91sam9g45_rtc_device = {
+ .name = "at91_rtc",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_rtc(void)
+{
+ platform_device_register(&at91sam9g45_rtc_device);
+}
+#else
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9g45_rtt_device = {
+ .name = "at91_rtt",
+ .id = 0,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91sam9g45_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9g45_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9g45_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_PWMC,
+ .end = AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_PWMC,
+ .end = AT91SAM9G45_ID_PWMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_pwm0_device = {
+ .name = "atmel_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &pwm_mask,
+ },
+ .resource = pwm_resources,
+ .num_resources = ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+ if (mask & (1 << AT91_PWM0))
+ at91_set_B_periph(AT91_PIN_PD24, 1); /* enable PWM0 */
+
+ if (mask & (1 << AT91_PWM1))
+ at91_set_B_periph(AT91_PIN_PD31, 1); /* enable PWM1 */
+
+ if (mask & (1 << AT91_PWM2))
+ at91_set_B_periph(AT91_PIN_PD26, 1); /* enable PWM2 */
+
+ if (mask & (1 << AT91_PWM3))
+ at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */
+
+ pwm_mask = mask;
+
+ platform_device_register(&at91sam9g45_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SSC0,
+ .end = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SSC0,
+ .end = AT91SAM9G45_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PD1, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PD0, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PD2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PD3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PD4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PD5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SSC1,
+ .end = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SSC1,
+ .end = AT91SAM9G45_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PD14, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PD12, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PD10, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PD11, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PD13, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PD15, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9G45_ID_SSC0:
+ pdev = &at91sam9g45_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9G45_ID_SSC1:
+ pdev = &at91sam9g45_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US0,
+ .end = AT91SAM9G45_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US0,
+ .end = AT91SAM9G45_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US1,
+ .end = AT91SAM9G45_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US1,
+ .end = AT91SAM9G45_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US2,
+ .end = AT91SAM9G45_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US2,
+ .end = AT91SAM9G45_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
+}
+
+static struct resource uart3_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US3,
+ .end = AT91SAM9G45_BASE_US3 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US3,
+ .end = AT91SAM9G45_ID_US3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart3_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */
+}
+
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9g45_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US0:
+ pdev = &at91sam9g45_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US1:
+ pdev = &at91sam9g45_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US2:
+ pdev = &at91sam9g45_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US3:
+ pdev = &at91sam9g45_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ at91_add_device_rtc();
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
+ at91_add_device_tc();
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 970fd6b6753..61e52b66bc7 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -174,6 +174,16 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
},
};
+/*
+ * IDE (CF True IDE mode)
+ */
+static struct at91_cf_data afeb9260_cf_data = {
+ .chipselect = 4,
+ .irq_pin = AT91_PIN_PA6,
+ .rst_pin = AT91_PIN_PA7,
+ .flags = AT91_CF_TRUE_IDE,
+};
+
static void __init afeb9260_board_init(void)
{
/* Serial */
@@ -202,6 +212,8 @@ static void __init afeb9260_board_init(void)
ARRAY_SIZE(afeb9260_i2c_devices));
/* Audio */
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+ /* IDE */
+ at91_add_device_cf(&afeb9260_cf_data);
}
MACHINE_START(AFEB9260, "Custom afeb9260 board")
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
new file mode 100644
index 00000000000..4bc2e9f6ebb
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -0,0 +1,385 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpu9krea.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9260_matrix.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+static void __init cpu9krea_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91sam9260_initialize(18432000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART3 on ttyS4. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+ /* USART4 on ttyS5. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init cpu9krea_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata cpu9krea_udc_data = {
+ .vbus_pin = AT91_PIN_PC8,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata cpu9krea_macb_data = {
+ .is_rmii = 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct atmel_nand_data __initdata cpu9krea_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .bus_width_16 = 0,
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 3,
+};
+#endif
+
+static void __init cpu9krea_add_device_nand(void)
+{
+ sam9_smc_configure(3, &cpu9krea_nand_smc_config);
+ at91_add_device_nand(&cpu9krea_nand_data);
+}
+
+/*
+ * NOR flash
+ */
+static struct physmap_flash_data cpuat9260_nor_data = {
+ .width = 2,
+};
+
+#define NOR_BASE AT91_CHIPSELECT_0
+#define NOR_SIZE SZ_64M
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = NOR_BASE,
+ .end = NOR_BASE + NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cpu9krea_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cpuat9260_nor_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 10,
+ .nrd_pulse = 10,
+ .ncs_write_pulse = 6,
+ .nwe_pulse = 6,
+
+ .read_cycle = 12,
+ .write_cycle = 8,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+ | AT91_SMC_DBW_16,
+ .tdf_cycles = 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 13,
+ .nrd_pulse = 13,
+ .ncs_write_pulse = 8,
+ .nwe_pulse = 8,
+
+ .read_cycle = 15,
+ .write_cycle = 10,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+ | AT91_SMC_DBW_16,
+ .tdf_cycles = 2,
+};
+#endif
+
+static __init void cpu9krea_add_device_nor(void)
+{
+ unsigned long csa;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
+
+ /* configure chip-select 0 (NOR) */
+ sam9_smc_configure(0, &cpu9krea_nor_smc_config);
+
+ platform_device_register(&cpu9krea_nor_flash);
+}
+
+/*
+ * LEDs
+ */
+static struct gpio_led cpu9krea_leds[] = {
+ { /* LED1 */
+ .name = "LED1",
+ .gpio = AT91_PIN_PC11,
+ .active_low = 1,
+ .default_trigger = "timer",
+ },
+ { /* LED2 */
+ .name = "LED2",
+ .gpio = AT91_PIN_PC12,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* LED3 */
+ .name = "LED3",
+ .gpio = AT91_PIN_PC7,
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+ { /* LED4 */
+ .name = "LED4",
+ .gpio = AT91_PIN_PC9,
+ .active_low = 1,
+ .default_trigger = "none",
+ }
+};
+
+static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rtc-ds1307", 0x68),
+ .type = "ds1339",
+ },
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button cpu9krea_buttons[] = {
+ {
+ .gpio = AT91_PIN_PC3,
+ .code = BTN_0,
+ .desc = "BP1",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PB20,
+ .code = BTN_1,
+ .desc = "BP2",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data cpu9krea_button_data = {
+ .buttons = cpu9krea_buttons,
+ .nbuttons = ARRAY_SIZE(cpu9krea_buttons),
+};
+
+static struct platform_device cpu9krea_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &cpu9krea_button_data,
+ }
+};
+
+static void __init cpu9krea_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PC3, 1); /* BP1 */
+ at91_set_deglitch(AT91_PIN_PC3, 1);
+ at91_set_gpio_input(AT91_PIN_PB20, 1); /* BP2 */
+ at91_set_deglitch(AT91_PIN_PB20, 1);
+
+ platform_device_register(&cpu9krea_button_device);
+}
+#else
+static void __init cpu9krea_add_device_buttons(void)
+{
+}
+#endif
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PA29,
+};
+
+static void __init cpu9krea_board_init(void)
+{
+ /* NOR */
+ cpu9krea_add_device_nor();
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&cpu9krea_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&cpu9krea_udc_data);
+ /* NAND */
+ cpu9krea_add_device_nand();
+ /* Ethernet */
+ at91_add_device_eth(&cpu9krea_macb_data);
+ /* MMC */
+ at91_add_device_mmc(0, &cpu9krea_mmc_data);
+ /* I2C */
+ at91_add_device_i2c(cpu9krea_i2c_devices,
+ ARRAY_SIZE(cpu9krea_i2c_devices));
+ /* LEDs */
+ at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds));
+ /* Push Buttons */
+ cpu9krea_add_device_buttons();
+}
+
+#ifdef CONFIG_MACH_CPU9260
+MACHINE_START(CPUAT9260, "Eukrea CPU9260")
+#else
+MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
+#endif
+ /* Maintainer: Eric Benard - EUKREA Electromatique */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = cpu9krea_map_io,
+ .init_irq = cpu9krea_init_irq,
+ .init_machine = cpu9krea_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
new file mode 100644
index 00000000000..a28d9965619
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -0,0 +1,185 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpuat91.c
+ *
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
+
+#include "generic.h"
+
+static struct gpio_led cpuat91_leds[] = {
+ {
+ .name = "led1",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ .gpio = AT91_PIN_PC0,
+ },
+};
+
+static void __init cpuat91_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART2 on ttyS3 (Rx, Tx) */
+ at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+ /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init cpuat91_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata cpuat91_eth_data = {
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata cpuat91_usbh_data = {
+ .ports = 1,
+};
+
+static struct at91_udc_data __initdata cpuat91_udc_data = {
+ .vbus_pin = AT91_PIN_PC15,
+ .pullup_pin = AT91_PIN_PC14,
+};
+
+static struct at91_mmc_data __initdata cpuat91_mmc_data = {
+ .det_pin = AT91_PIN_PC2,
+ .wire4 = 1,
+};
+
+static struct physmap_flash_data cpuat91_flash_data = {
+ .width = 2,
+};
+
+static struct resource cpuat91_flash_resource = {
+ .start = AT91_CHIPSELECT_0,
+ .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device cpuat91_norflash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cpuat91_flash_data,
+ },
+ .resource = &cpuat91_flash_resource,
+ .num_resources = 1,
+};
+
+#ifdef CONFIG_MTD_PLATRAM
+struct platdata_mtd_ram at91_sram_pdata = {
+ .mapname = "SRAM",
+ .bankwidth = 2,
+};
+
+static struct resource at91_sram_resource[] = {
+ [0] = {
+ .start = AT91RM9200_SRAM_BASE,
+ .end = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device at91_sram = {
+ .name = "mtd-ram",
+ .id = 0,
+ .resource = at91_sram_resource,
+ .num_resources = ARRAY_SIZE(at91_sram_resource),
+ .dev = {
+ .platform_data = &at91_sram_pdata,
+ },
+};
+#endif /* MTD_PLATRAM */
+
+static struct platform_device *platform_devices[] __initdata = {
+ &cpuat91_norflash,
+#ifdef CONFIG_MTD_PLATRAM
+ &at91_sram,
+#endif /* CONFIG_MTD_PLATRAM */
+};
+
+static void __init cpuat91_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* LEDs. */
+ at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
+ /* Ethernet */
+ at91_add_device_eth(&cpuat91_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&cpuat91_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&cpuat91_udc_data);
+ /* MMC */
+ at91_add_device_mmc(0, &cpuat91_mmc_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* Platform devices */
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+MACHINE_START(CPUAT91, "Eukrea")
+ /* Maintainer: Eric Benard - EUKREA Electromatique */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = cpuat91_map_io,
+ .init_irq = cpuat91_init_irq,
+ .init_machine = cpuat91_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d5266da5531..f9b19993a7a 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -287,7 +287,11 @@ static void __init ek_add_device_ts(void) {}
*/
static struct at73c213_board_info at73c213_data = {
.ssc_id = 1,
+#if defined(CONFIG_MACH_AT91SAM9261EK)
.shortname = "AT91SAM9261-EK external DAC",
+#else
+ .shortname = "AT91SAM9G10-EK external DAC",
+#endif
};
#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -414,6 +418,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
.default_monspecs = &at91fb_default_stn_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_stn_power_control,
.guard_time = 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
+#endif
};
#else
@@ -467,6 +474,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
.default_monspecs = &at91fb_default_tft_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
.guard_time = 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
+#endif
};
#endif
@@ -600,7 +610,11 @@ static void __init ek_board_init(void)
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
+#if defined(CONFIG_MACH_AT91SAM9261EK)
MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+#else
+MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
+#endif
/* Maintainer: Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 57d52528f22..1bf7bd4cbe1 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -364,9 +364,9 @@ static void __init ek_add_device_buttons(void) {}
/*
* AC97
+ * reset_pin is not connected: NRST
*/
-static struct atmel_ac97_data ek_ac97_data = {
- .reset_pin = AT91_PIN_PA13,
+static struct ac97c_platform_data ek_ac97_data = {
};
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index a55398ed121..ca470d504ea 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -273,6 +273,7 @@ static void __init ek_add_device_buttons(void) {}
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
I2C_BOARD_INFO("24c512", 0x50),
+ I2C_BOARD_INFO("wm8731", 0x1b),
},
};
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
new file mode 100644
index 00000000000..b8558eae522
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -0,0 +1,389 @@
+/*
+ * Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
+ *
+ * Covers: * AT91SAM9G45-EKES board
+ * * AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91sam9g45_initialize(12000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 not connected on the -EK board */
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9g45_init_interrupts(NULL);
+}
+
+
+/*
+ * USB HS Host port (common to OHCI & EHCI)
+ */
+static struct at91_usbh_data __initdata ek_usbh_hs_data = {
+ .ports = 2,
+ .vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3},
+};
+
+
+/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata ek_usba_udc_data = {
+ .vbus_pin = AT91_PIN_PB19,
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PD5,
+ .is_rmii = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = SZ_64M,
+ },
+ {
+ .name = "Partition 2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC8,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "LG",
+ .refresh = 60,
+ .xres = 480, .yres = 272,
+ .pixclock = KHZ2PICOS(9000),
+
+ .left_margin = 1, .right_margin = 1,
+ .upper_margin = 40, .lower_margin = 1,
+ .hsync_len = 45, .vsync_len = 1,
+
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+ .manufacturer = "LG",
+ .monitor = "LB043WQ1",
+
+ .modedb = at91_tft_vga_modes,
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
+ .hfmin = 15000,
+ .hfmax = 17640,
+ .vfmin = 57,
+ .vfmax = 67,
+};
+
+#define AT91SAM9G45_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .lcdcon_is_backlight = true,
+ .default_bpp = 32,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9G45_DEFAULT_LCDCON2,
+ .default_monspecs = &at91fb_default_monspecs,
+ .guard_time = 9,
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* BP1, "leftclic" */
+ .code = BTN_LEFT,
+ .gpio = AT91_PIN_PB6,
+ .active_low = 1,
+ .desc = "left_click",
+ .wakeup = 1,
+ },
+ { /* BP2, "rightclic" */
+ .code = BTN_RIGHT,
+ .gpio = AT91_PIN_PB7,
+ .active_low = 1,
+ .desc = "right_click",
+ .wakeup = 1,
+ },
+ /* BP3, "joystick" */
+ {
+ .code = KEY_LEFT,
+ .gpio = AT91_PIN_PB14,
+ .active_low = 1,
+ .desc = "Joystick Left",
+ },
+ {
+ .code = KEY_RIGHT,
+ .gpio = AT91_PIN_PB15,
+ .active_low = 1,
+ .desc = "Joystick Right",
+ },
+ {
+ .code = KEY_UP,
+ .gpio = AT91_PIN_PB16,
+ .active_low = 1,
+ .desc = "Joystick Up",
+ },
+ {
+ .code = KEY_DOWN,
+ .gpio = AT91_PIN_PB17,
+ .active_low = 1,
+ .desc = "Joystick Down",
+ },
+ {
+ .code = KEY_ENTER,
+ .gpio = AT91_PIN_PB18,
+ .active_low = 1,
+ .desc = "Joystick Press",
+ },
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
+ at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
+ at91_set_deglitch(ek_buttons[i].gpio, 1);
+ }
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
+/*
+ * LEDs ... these could all be PWM-driven, for variable brightness
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "top" led, red, powerled */
+ .name = "d8",
+ .gpio = AT91_PIN_PD30,
+ .default_trigger = "heartbeat",
+ },
+ { /* "left" led, green, userled2, pwm3 */
+ .name = "d6",
+ .gpio = AT91_PIN_PD0,
+ .active_low = 1,
+ .default_trigger = "nand-disk",
+ },
+#if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE))
+ { /* "right" led, green, userled1, pwm1 */
+ .name = "d7",
+ .gpio = AT91_PIN_PD31,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+#endif
+};
+
+
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+#if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)
+ { /* "right" led, green, userled1, pwm1 */
+ .name = "d7",
+ .gpio = 1, /* is PWM channel number */
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+#endif
+};
+
+
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB HS Host */
+ at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+ /* USB HS Device */
+ at91_add_device_usba(&ek_usba_udc_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+ /* NAND */
+ ek_add_device_nand();
+ /* I2C */
+ at91_add_device_i2c(0, NULL, 0);
+ /* LCD Controller */
+ at91_add_device_lcdc(&ek_lcdc_data);
+ /* Push Buttons */
+ ek_add_device_buttons();
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+}
+
+MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index f6b5672cabd..9d07679efce 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -15,6 +15,8 @@
#include <linux/spi/spi.h>
#include <linux/fb.h>
#include <linux/clk.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <video/atmel_lcdc.h>
@@ -208,6 +210,79 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
#endif
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "bottom" led, green, userled1 to be defined */
+ .name = "ds1",
+ .gpio = AT91_PIN_PD15,
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+ { /* "bottom" led, green, userled2 to be defined */
+ .name = "ds2",
+ .gpio = AT91_PIN_PD16,
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+ { /* "power" led, yellow */
+ .name = "ds3",
+ .gpio = AT91_PIN_PD14,
+ .default_trigger = "heartbeat",
+ }
+};
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ {
+ .gpio = AT91_PIN_PB0,
+ .code = BTN_2,
+ .desc = "Right Click",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PB1,
+ .code = BTN_1,
+ .desc = "Left Click",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PB1, 1); /* btn1 */
+ at91_set_deglitch(AT91_PIN_PB1, 1);
+ at91_set_gpio_input(AT91_PIN_PB0, 1); /* btn2 */
+ at91_set_deglitch(AT91_PIN_PB0, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -226,6 +301,10 @@ static void __init ek_board_init(void)
at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen Controller */
at91_add_device_tsadcc();
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* Push Buttons */
+ ek_add_device_buttons();
}
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index bac578fe0d3..c042dcf4725 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -47,20 +47,25 @@
* Chips have some kind of clocks : group them by functionality
*/
#define cpu_has_utmi() ( cpu_is_at91cap9() \
- || cpu_is_at91sam9rl())
+ || cpu_is_at91sam9rl() \
+ || cpu_is_at91sam9g45())
-#define cpu_has_800M_plla() (cpu_is_at91sam9g20())
+#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
+ || cpu_is_at91sam9g45())
-#define cpu_has_pllb() (!cpu_is_at91sam9rl())
+#define cpu_has_300M_plla() (cpu_is_at91sam9g10())
-#define cpu_has_upll() (0)
+#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
+ || cpu_is_at91sam9g45()))
+
+#define cpu_has_upll() (cpu_is_at91sam9g45())
/* USB host HS & FS */
#define cpu_has_uhp() (!cpu_is_at91sam9rl())
/* USB device FS only */
-#define cpu_has_udpfs() (!cpu_is_at91sam9rl())
-
+#define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \
+ || cpu_is_at91sam9g45()))
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
@@ -133,6 +138,13 @@ static void pmc_uckr_mode(struct clk *clk, int is_on)
{
unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+ if (cpu_is_at91sam9g45()) {
+ if (is_on)
+ uckr |= AT91_PMC_BIASEN;
+ else
+ uckr &= ~AT91_PMC_BIASEN;
+ }
+
if (is_on) {
is_on = AT91_PMC_LOCKU;
at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
@@ -310,6 +322,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
unsigned long flags;
unsigned prescale;
unsigned long actual;
+ unsigned long prev = ULONG_MAX;
if (!clk_is_programmable(clk))
return -EINVAL;
@@ -317,8 +330,16 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
actual = clk->parent->rate_hz;
for (prescale = 0; prescale < 7; prescale++) {
- if (actual && actual <= rate)
+ if (actual > rate)
+ prev = actual;
+
+ if (actual && actual <= rate) {
+ if ((prev - rate) < (rate - actual)) {
+ actual = prev;
+ prescale--;
+ }
break;
+ }
actual >>= 1;
}
@@ -373,6 +394,10 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
return -EBUSY;
if (!clk_is_primary(parent) || !clk_is_programmable(clk))
return -EINVAL;
+
+ if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB)
+ return -EINVAL;
+
spin_lock_irqsave(&clk_lock, flags);
clk->rate_hz = parent->rate_hz;
@@ -601,7 +626,9 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
uhpck.pmc_mask = AT91RM9200_PMC_UHP;
udpck.pmc_mask = AT91RM9200_PMC_UDP;
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
+ cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
+ cpu_is_at91sam9g10()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
} else if (cpu_is_at91cap9()) {
@@ -637,6 +664,7 @@ int __init at91_clock_init(unsigned long main_clock)
{
unsigned tmp, freq, mckr;
int i;
+ int pll_overclock = false;
/*
* When the bootloader initialized the main oscillator correctly,
@@ -654,12 +682,25 @@ int __init at91_clock_init(unsigned long main_clock)
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
- if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
- || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
+ if (cpu_has_300M_plla()) {
+ if (plla.rate_hz > 300000000)
+ pll_overclock = true;
+ } else if (cpu_has_800M_plla()) {
+ if (plla.rate_hz > 800000000)
+ pll_overclock = true;
+ } else {
+ if (plla.rate_hz > 209000000)
+ pll_overclock = true;
+ }
+ if (pll_overclock)
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
+ if (cpu_is_at91sam9g45()) {
+ mckr = at91_sys_read(AT91_PMC_MCKR);
+ plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12)); /* plla divisor by 2 */
+ }
- if (cpu_has_upll() && !cpu_has_pllb()) {
+ if (!cpu_has_pllb() && cpu_has_upll()) {
/* setup UTMI clock as the fourth primary clock
* (instead of pllb) */
utmi_clk.type |= CLK_TYPE_PRIMARY;
@@ -701,6 +742,9 @@ int __init at91_clock_init(unsigned long main_clock)
freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
if (mckr & AT91_PMC_PDIV)
freq /= 2; /* processor clock division */
+ } else if (cpu_is_at91sam9g45()) {
+ mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
+ freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
} else {
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
}
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b5daf7f5e01..88e413b3848 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -14,6 +14,7 @@ extern void __init at91sam9260_initialize(unsigned long main_clock);
extern void __init at91sam9261_initialize(unsigned long main_clock);
extern void __init at91sam9263_initialize(unsigned long main_clock);
extern void __init at91sam9rl_initialize(unsigned long main_clock);
+extern void __init at91sam9g45_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91cap9_initialize(unsigned long main_clock);
@@ -23,6 +24,7 @@ extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index f2236f0e101..ae4772e744a 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -44,13 +44,11 @@ static int at91_gpiolib_direction_output(struct gpio_chip *chip,
unsigned offset, int val);
static int at91_gpiolib_direction_input(struct gpio_chip *chip,
unsigned offset);
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \
{ \
.chip = { \
.label = name, \
- .request = at91_gpiolib_request, \
.direction_input = at91_gpiolib_direction_input, \
.direction_output = at91_gpiolib_direction_output, \
.get = at91_gpiolib_get, \
@@ -588,19 +586,6 @@ static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
}
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
-{
- unsigned pin = chip->base + offset;
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- /* Cannot request GPIOs that are in alternate function mode */
- if (!(__raw_readl(pio + PIO_PSR) & mask))
- return -EPERM;
-
- return 0;
-}
-
static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
int i;
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 3a348ca2077..87de8be1748 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -95,6 +95,9 @@
#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
+#define AT91SAM9G10_SRAM_BASE AT91SAM9261_SRAM_BASE /* Internal SRAM base address */
+#define AT91SAM9G10_SRAM_SIZE 0x00004000 /* Internal SRAM size (16Kb) */
+
#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
new file mode 100644
index 00000000000..a526869aee3
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -0,0 +1,155 @@
+/*
+ * Chip-specific header file for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_H
+#define AT91SAM9G45_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Controller Interrupt */
+#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */
+#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */
+#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */
+#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */
+#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */
+#define AT91SAM9G45_ID_US0 7 /* USART 0 */
+#define AT91SAM9G45_ID_US1 8 /* USART 1 */
+#define AT91SAM9G45_ID_US2 9 /* USART 2 */
+#define AT91SAM9G45_ID_US3 10 /* USART 3 */
+#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */
+#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */
+#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */
+#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */
+#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */
+#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */
+#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */
+#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */
+#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */
+#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */
+#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */
+#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */
+#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */
+#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */
+#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */
+#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */
+#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */
+#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9G45_BASE_UDPHS 0xfff78000
+#define AT91SAM9G45_BASE_TCB0 0xfff7c000
+#define AT91SAM9G45_BASE_TC0 0xfff7c000
+#define AT91SAM9G45_BASE_TC1 0xfff7c040
+#define AT91SAM9G45_BASE_TC2 0xfff7c080
+#define AT91SAM9G45_BASE_MCI0 0xfff80000
+#define AT91SAM9G45_BASE_TWI0 0xfff84000
+#define AT91SAM9G45_BASE_TWI1 0xfff88000
+#define AT91SAM9G45_BASE_US0 0xfff8c000
+#define AT91SAM9G45_BASE_US1 0xfff90000
+#define AT91SAM9G45_BASE_US2 0xfff94000
+#define AT91SAM9G45_BASE_US3 0xfff98000
+#define AT91SAM9G45_BASE_SSC0 0xfff9c000
+#define AT91SAM9G45_BASE_SSC1 0xfffa0000
+#define AT91SAM9G45_BASE_SPI0 0xfffa4000
+#define AT91SAM9G45_BASE_SPI1 0xfffa8000
+#define AT91SAM9G45_BASE_AC97C 0xfffac000
+#define AT91SAM9G45_BASE_TSC 0xfffb0000
+#define AT91SAM9G45_BASE_ISI 0xfffb4000
+#define AT91SAM9G45_BASE_PWMC 0xfffb8000
+#define AT91SAM9G45_BASE_EMAC 0xfffbc000
+#define AT91SAM9G45_BASE_AES 0xfffc0000
+#define AT91SAM9G45_BASE_TDES 0xfffc4000
+#define AT91SAM9G45_BASE_SHA 0xfffc8000
+#define AT91SAM9G45_BASE_TRNG 0xfffcc000
+#define AT91SAM9G45_BASE_MCI1 0xfffd0000
+#define AT91SAM9G45_BASE_TCB1 0xfffd4000
+#define AT91SAM9G45_BASE_TC3 0xfffd4000
+#define AT91SAM9G45_BASE_TC4 0xfffd4040
+#define AT91SAM9G45_BASE_TC5 0xfffd4080
+#define AT91_BASE_SYS 0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
+#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC (0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9G45_BASE_US0
+#define AT91_USART1 AT91SAM9G45_BASE_US1
+#define AT91_USART2 AT91SAM9G45_BASE_US2
+#define AT91_USART3 AT91SAM9G45_BASE_US3
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */
+
+#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */
+
+#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
+#define AT91SAM9G45_OHCI_BASE 0x00700000 /* USB Host controller (OHCI) */
+#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */
+#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */
+
+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
+
+#define CONSISTENT_DMA_SIZE SZ_4M
+
+/*
+ * DMA peripheral identifiers
+ * for hardware handshaking interface
+ */
+#define AT_DMA_ID_MCI0 0
+#define AT_DMA_ID_SPI0_TX 1
+#define AT_DMA_ID_SPI0_RX 2
+#define AT_DMA_ID_SPI1_TX 3
+#define AT_DMA_ID_SPI1_RX 4
+#define AT_DMA_ID_SSC0_TX 5
+#define AT_DMA_ID_SSC0_RX 6
+#define AT_DMA_ID_SSC1_TX 7
+#define AT_DMA_ID_SSC1_RX 8
+#define AT_DMA_ID_AC97_TX 9
+#define AT_DMA_ID_AC97_RX 10
+#define AT_DMA_ID_MCI1 13
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
new file mode 100644
index 00000000000..c972d60e0ae
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
@@ -0,0 +1,153 @@
+/*
+ * Matrix-centric header file for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_MATRIX_H
+#define AT91SAM9G45_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0)
+#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
+#define AT91_MATRIX_ULBT_128 (7 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
+#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
+#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+#define AT91_MATRIX_RCB9 (1 << 9)
+#define AT91_MATRIX_RCB10 (1 << 10)
+#define AT91_MATRIX_RCB11 (1 << 11)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */
+#define AT91_MATRIX_TCM_NO_WS (0x0 << 11)
+#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11)
+
+#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */
+#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */
+#define AT91C_VDEC_SEL_OFF (0 << 0)
+#define AT91C_VDEC_SEL_ON (1 << 0)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4)
+#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
+#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
+#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
+#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
+#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
+#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
+#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
+
+#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
+#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
+#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
+#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
+#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
+#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
+#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
+#define AT91_MATRIX_WPSR_WPV (1 << 0)
+#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index e6afff849b8..13f27a4b882 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -37,6 +37,7 @@
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
+#include <sound/atmel-ac97c.h>
/* USB Device */
struct at91_udc_data {
@@ -80,7 +81,8 @@ struct at91_eth_data {
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
+ || defined(CONFIG_ARCH_AT91SAM9G45)
#define eth_platform_data at91_eth_data
#endif
@@ -90,6 +92,7 @@ struct at91_usbh_data {
u8 vbus_pin[2]; /* port power-control pin */
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
/* NAND / SmartMedia */
struct atmel_nand_data {
@@ -105,7 +108,11 @@ struct atmel_nand_data {
extern void __init at91_add_device_nand(struct atmel_nand_data *data);
/* I2C*/
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
+#else
extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+#endif
/* SPI */
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
@@ -168,10 +175,7 @@ struct atmel_lcdfb_info;
extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
/* AC97 */
-struct atmel_ac97_data {
- u8 reset_pin; /* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
/* ISI */
extern void __init at91_add_device_isi(void);
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index c554c3e4d55..34a9502c48b 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -21,8 +21,10 @@
#define ARCH_ID_AT91SAM9260 0x019803a0
#define ARCH_ID_AT91SAM9261 0x019703a0
#define ARCH_ID_AT91SAM9263 0x019607a0
+#define ARCH_ID_AT91SAM9G10 0x819903a0
#define ARCH_ID_AT91SAM9G20 0x019905a0
#define ARCH_ID_AT91SAM9RL64 0x019b03a0
+#define ARCH_ID_AT91SAM9G45 0x819b05a0
#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
@@ -39,6 +41,15 @@ static inline unsigned long at91_cpu_identify(void)
return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
}
+#define ARCH_EXID_AT91SAM9M11 0x00000001
+#define ARCH_EXID_AT91SAM9M10 0x00000002
+#define ARCH_EXID_AT91SAM9G45 0x00000004
+
+static inline unsigned long at91_exid_identify(void)
+{
+ return at91_sys_read(AT91_DBGU_EXID);
+}
+
#define ARCH_FAMILY_AT91X92 0x09200000
#define ARCH_FAMILY_AT91SAM9 0x01900000
@@ -87,6 +98,12 @@ static inline unsigned long at91cap9_rev_identify(void)
#define cpu_is_at91sam9261() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9G10
+#define cpu_is_at91sam9g10() (at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#else
+#define cpu_is_at91sam9g10() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91SAM9263
#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263)
#else
@@ -99,6 +116,12 @@ static inline unsigned long at91cap9_rev_identify(void)
#define cpu_is_at91sam9rl() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9G45
+#define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#else
+#define cpu_is_at91sam9g45() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91CAP9
#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index da0b681c652..a0df8b022df 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -20,12 +20,14 @@
#include <mach/at91rm9200.h>
#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
#include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
+#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
#include <mach/at91sam9261.h>
#elif defined(CONFIG_ARCH_AT91SAM9263)
#include <mach/at91sam9263.h>
#elif defined(CONFIG_ARCH_AT91SAM9RL)
#include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9g45.h>
#elif defined(CONFIG_ARCH_AT91CAP9)
#include <mach/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index d84c9948bec..31ac2d97f14 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -42,6 +42,11 @@
#define AT91SAM9_MASTER_CLOCK 99300000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9G10)
+
+#define AT91SAM9_MASTER_CLOCK 133000000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91SAM9263)
#if defined(CONFIG_MACH_USB_A9263)
@@ -62,6 +67,11 @@
#define AT91SAM9_MASTER_CLOCK 132096000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+
+#define AT91SAM9_MASTER_CLOCK 133333333
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91CAP9)
#define AT91CAP9_MASTER_CLOCK 100000000
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e26c4fe61fa..4028724d490 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -201,7 +201,8 @@ static int at91_pm_verify_clocks(void)
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
+ || cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig
new file mode 100644
index 00000000000..457b4384913
--- /dev/null
+++ b/arch/arm/mach-bcmring/Kconfig
@@ -0,0 +1,21 @@
+choice
+ prompt "Processor selection in BCMRING family of devices"
+ depends on ARCH_BCMRING
+ default ARCH_BCM11107
+
+config ARCH_FPGA11107
+ bool "FPGA11107"
+
+config ARCH_BCM11107
+ bool "BCM11107"
+endchoice
+
+menu "BCMRING Options"
+ depends on ARCH_BCMRING
+
+config BCM_ZRELADDR
+ hex "Compressed ZREL ADDR"
+
+endmenu
+
+# source "drivers/char/bcmring/Kconfig"
diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile
new file mode 100644
index 00000000000..f8d9fcedf91
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
+obj-y += csp/
diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot
new file mode 100644
index 00000000000..fb53b283beb
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile.boot
@@ -0,0 +1,6 @@
+# Address where decompressor will be written and eventually executed.
+#
+# default to SDRAM
+zreladdr-y := $(CONFIG_BCM_ZRELADDR)
+params_phys-y := 0x00000800
+
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
new file mode 100644
index 00000000000..0da693b0f7e
--- /dev/null
+++ b/arch/arm/mach-bcmring/arch.c
@@ -0,0 +1,157 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <cfg_global.h>
+
+#include "core.h"
+
+HW_DECLARE_SPINLOCK(arch)
+HW_DECLARE_SPINLOCK(gpio)
+#if defined(CONFIG_DEBUG_SPINLOCK)
+ EXPORT_SYMBOL(bcmring_gpio_reg_lock);
+#endif
+
+/* FIXME: temporary solution */
+#define BCM_SYSCTL_REBOOT_WARM 1
+#define CTL_BCM_REBOOT 112
+
+/* sysctl */
+int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */
+
+static struct ctl_table_header *bcmring_sysctl_header;
+
+static struct ctl_table bcmring_sysctl_warm_reboot[] = {
+ {
+ .ctl_name = BCM_SYSCTL_REBOOT_WARM,
+ .procname = "warm",
+ .data = &bcmring_arch_warm_reboot,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec},
+ {}
+};
+
+static struct ctl_table bcmring_sysctl_reboot[] = {
+ {
+ .ctl_name = CTL_BCM_REBOOT,
+ .procname = "reboot",
+ .mode = 0555,
+ .child = bcmring_sysctl_warm_reboot},
+ {}
+};
+
+static struct platform_device nand_device = {
+ .name = "bcm-nand",
+ .id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &nand_device,
+};
+
+/****************************************************************************
+*
+* Called from the customize_machine function in arch/arm/kernel/setup.c
+*
+* The customize_machine function is tagged as an arch_initcall
+* (see include/linux/init.h for the order that the various init sections
+* are called in.
+*
+*****************************************************************************/
+static void __init bcmring_init_machine(void)
+{
+
+ bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
+
+ /* Enable spread spectrum */
+ chipcHw_enableSpreadSpectrum();
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ bcmring_amba_init();
+
+ dma_init();
+}
+
+/****************************************************************************
+*
+* Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
+* passed in by the boot loader.
+*
+*****************************************************************************/
+
+static void __init bcmring_fixup(struct machine_desc *desc,
+ struct tag *t, char **cmdline, struct meminfo *mi) {
+#ifdef CONFIG_BLK_DEV_INITRD
+ printk(KERN_NOTICE "bcmring_fixup\n");
+ t->hdr.tag = ATAG_CORE;
+ t->hdr.size = tag_size(tag_core);
+ t->u.core.flags = 0;
+ t->u.core.pagesize = PAGE_SIZE;
+ t->u.core.rootdev = 31 << 8 | 0;
+ t = tag_next(t);
+
+ t->hdr.tag = ATAG_MEM;
+ t->hdr.size = tag_size(tag_mem32);
+ t->u.mem.start = CFG_GLOBAL_RAM_BASE;
+ t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
+
+ t = tag_next(t);
+
+ t->hdr.tag = ATAG_NONE;
+ t->hdr.size = 0;
+#endif
+}
+
+/****************************************************************************
+*
+* Machine Description
+*
+*****************************************************************************/
+
+MACHINE_START(BCMRING, "BCMRING")
+ /* Maintainer: Broadcom Corporation */
+ .phys_io = MM_IO_START,
+ .io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc,
+ .fixup = bcmring_fixup,
+ .map_io = bcmring_map_io,
+ .init_irq = bcmring_init_irq,
+ .timer = &bcmring_timer,
+ .init_machine = bcmring_init_machine
+MACHINE_END
diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
new file mode 100644
index 00000000000..14bafc38f2d
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.c
@@ -0,0 +1,224 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <mach/csp/hw_cfg.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_pll1(x) ((x)->type & CLK_TYPE_PLL1)
+#define clk_is_pll2(x) ((x)->type & CLK_TYPE_PLL2)
+#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_bypassable(x) ((x)->type & CLK_TYPE_BYPASSABLE)
+
+#define clk_is_using_xtal(x) ((x)->mode & CLK_MODE_XTAL)
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ /* enable parent clock first */
+ if (clk->parent)
+ __clk_enable(clk->parent);
+
+ if (clk->use_cnt++ == 0) {
+ if (clk_is_pll1(clk)) { /* PLL1 */
+ chipcHw_pll1Enable(clk->rate_hz, 0);
+ } else if (clk_is_pll2(clk)) { /* PLL2 */
+ chipcHw_pll2Enable(clk->rate_hz);
+ } else if (clk_is_using_xtal(clk)) { /* source is crystal */
+ if (!clk_is_primary(clk))
+ chipcHw_bypassClockEnable(clk->csp_id);
+ } else { /* source is PLL */
+ chipcHw_setClockEnable(clk->csp_id);
+ }
+ }
+}
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (!clk)
+ return -EINVAL;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ BUG_ON(clk->use_cnt == 0);
+
+ if (--clk->use_cnt == 0) {
+ if (clk_is_pll1(clk)) { /* PLL1 */
+ chipcHw_pll1Disable();
+ } else if (clk_is_pll2(clk)) { /* PLL2 */
+ chipcHw_pll2Disable();
+ } else if (clk_is_using_xtal(clk)) { /* source is crystal */
+ if (!clk_is_primary(clk))
+ chipcHw_bypassClockDisable(clk->csp_id);
+ } else { /* source is PLL */
+ chipcHw_setClockDisable(clk->csp_id);
+ }
+ }
+
+ if (clk->parent)
+ __clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (!clk)
+ return;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (!clk)
+ return 0;
+
+ return clk->rate_hz;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ unsigned long actual;
+ unsigned long rate_hz;
+
+ if (!clk)
+ return -EINVAL;
+
+ if (!clk_is_programmable(clk))
+ return -EINVAL;
+
+ if (clk->use_cnt)
+ return -EBUSY;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ actual = clk->parent->rate_hz;
+ rate_hz = min(actual, rate);
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return rate_hz;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ unsigned long actual;
+ unsigned long rate_hz;
+
+ if (!clk)
+ return -EINVAL;
+
+ if (!clk_is_programmable(clk))
+ return -EINVAL;
+
+ if (clk->use_cnt)
+ return -EBUSY;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ actual = clk->parent->rate_hz;
+ rate_hz = min(actual, rate);
+ rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
+ clk->rate_hz = rate_hz;
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ if (!clk)
+ return NULL;
+
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ struct clk *old_parent;
+
+ if (!clk || !parent)
+ return -EINVAL;
+
+ if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
+ return -EINVAL;
+
+ /* if more than one user, parent is not allowed */
+ if (clk->use_cnt > 1)
+ return -EBUSY;
+
+ if (clk->parent == parent)
+ return 0;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ old_parent = clk->parent;
+ clk->parent = parent;
+ if (clk_is_using_xtal(parent))
+ clk->mode |= CLK_MODE_XTAL;
+ else
+ clk->mode &= (~CLK_MODE_XTAL);
+
+ /* if clock is active */
+ if (clk->use_cnt != 0) {
+ clk->use_cnt--;
+ /* enable clock with the new parent */
+ __clk_enable(clk);
+ /* disable the old parent */
+ __clk_disable(old_parent);
+ }
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h
new file mode 100644
index 00000000000..5e0b9813897
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/chipcHw_def.h>
+
+#define CLK_TYPE_PRIMARY 1 /* primary clock must NOT have a parent */
+#define CLK_TYPE_PLL1 2 /* PPL1 */
+#define CLK_TYPE_PLL2 4 /* PPL2 */
+#define CLK_TYPE_PROGRAMMABLE 8 /* programmable clock rate */
+#define CLK_TYPE_BYPASSABLE 16 /* parent can be changed */
+
+#define CLK_MODE_XTAL 1 /* clock source is from crystal */
+
+struct clk {
+ const char *name; /* clock name */
+ unsigned int type; /* clock type */
+ unsigned int mode; /* current mode */
+ volatile int use_bypass; /* indicate if it's in bypass mode */
+ chipcHw_CLOCK_e csp_id; /* clock ID for CSP CHIPC */
+ unsigned long rate_hz; /* clock rate in Hz */
+ unsigned int use_cnt; /* usage count */
+ struct clk *parent; /* parent clock */
+};
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
new file mode 100644
index 00000000000..492c649f451
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.c
@@ -0,0 +1,367 @@
+/*
+ * derived from linux/arch/arm/mach-versatile/core.c
+ * linux/arch/arm/mach-bcmring/core.c
+ *
+ * Copyright (C) 1999 - 2003 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* Portions copyright Broadcom 2008 */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include <linux/amba/bus.h>
+#include <mach/csp/mm_addr.h>
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <cfg_global.h>
+
+#include "clock.h"
+
+#include <csp/secHw.h>
+#include <mach/csp/secHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define AMBA_DEVICE(name, initname, base, plat, size) \
+static struct amba_device name##_device = { \
+ .dev = { \
+ .coherent_dma_mask = ~0, \
+ .init_name = initname, \
+ .platform_data = plat \
+ }, \
+ .res = { \
+ .start = MM_ADDR_IO_##base, \
+ .end = MM_ADDR_IO_##base + (size) - 1, \
+ .flags = IORESOURCE_MEM \
+ }, \
+ .dma_mask = ~0, \
+ .irq = { \
+ IRQ_##base \
+ } \
+}
+
+
+AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
+AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+
+static struct clk pll1_clk = {
+ .name = "PLL1",
+ .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
+ .rate_hz = 2000000000,
+ .use_cnt = 7,
+};
+
+static struct clk uart_clk = {
+ .name = "UART",
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .csp_id = chipcHw_CLOCK_UART,
+ .rate_hz = HW_CFG_UART_CLK_HZ,
+ .parent = &pll1_clk,
+};
+
+static struct clk_lookup lookups[] = {
+ { /* UART0 */
+ .dev_id = "uarta",
+ .clk = &uart_clk,
+ }, { /* UART1 */
+ .dev_id = "uartb",
+ .clk = &uart_clk,
+ }
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &uartA_device,
+ &uartB_device,
+};
+
+void __init bcmring_amba_init(void)
+{
+ int i;
+ u32 bus_clock;
+
+/* Linux is run initially in non-secure mode. Secure peripherals */
+/* generate FIQ, and must be handled in secure mode. Until we have */
+/* a linux security monitor implementation, keep everything in */
+/* non-secure mode. */
+ chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
+ secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
+ secHw_BLK_MASK_KEY_SCAN |
+ secHw_BLK_MASK_TOUCH_SCREEN |
+ secHw_BLK_MASK_UART0 |
+ secHw_BLK_MASK_UART1 |
+ secHw_BLK_MASK_WATCHDOG |
+ secHw_BLK_MASK_SPUM |
+ secHw_BLK_MASK_DDR2 |
+ secHw_BLK_MASK_SPU |
+ secHw_BLK_MASK_PKA |
+ secHw_BLK_MASK_RNG |
+ secHw_BLK_MASK_RTC |
+ secHw_BLK_MASK_OTP |
+ secHw_BLK_MASK_BOOT |
+ secHw_BLK_MASK_MPU |
+ secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
+
+ /* Only the devices attached to the AMBA bus are enabled just before the bus is */
+ /* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
+ /* driver to access these blocks. The bus is probed, and the drivers are loaded. */
+ /* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
+ bus_clock = chipcHw_REG_BUS_CLOCK_GE
+ | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
+
+ chipcHw_busInterfaceClockEnable(bus_clock);
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+}
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE MM_IO_BASE_TMR
+#define TIMER1_VA_BASE (MM_IO_BASE_TMR + 0x20)
+#define TIMER2_VA_BASE (MM_IO_BASE_TMR + 0x40)
+#define TIMER3_VA_BASE (MM_IO_BASE_TMR + 0x60)
+
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+#define TICKS_PER_uSEC TIMER0_FREQUENCY_MHZ
+
+/*
+ * These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1 1000
+#define mSEC_5 (mSEC_1 * 5)
+#define mSEC_10 (mSEC_1 * 10)
+#define mSEC_25 (mSEC_1 * 25)
+#define SEC_1 (mSEC_1 * 1000)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD (TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR (TIMER_CTRL_DIV256)
+#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
+#define TIMER_DIVISOR (TIMER_CTRL_DIV16)
+#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD (TIMER_INTERVAL)
+#define TIMER_DIVISOR (TIMER_CTRL_DIV1)
+#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
+#endif
+
+static void timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ unsigned long ctrl;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+
+ ctrl = TIMER_CTRL_PERIODIC;
+ ctrl |=
+ TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+ TIMER_CTRL_ENABLE;
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* period set, and timer enabled in 'next_event' hook */
+ ctrl = TIMER_CTRL_ONESHOT;
+ ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ ctrl = 0;
+ }
+
+ writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+}
+
+static int timer_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+
+ writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
+ writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+
+ return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+ .name = "timer0",
+ .shift = 32,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = timer_set_mode,
+ .set_next_event = timer_set_next_event,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &timer0_clockevent;
+
+ writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction bcmring_timer_irq = {
+ .name = "bcmring Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = bcmring_timer_interrupt,
+};
+
+static cycle_t bcmring_get_cycles_timer1(void)
+{
+ return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
+}
+
+static cycle_t bcmring_get_cycles_timer3(void)
+{
+ return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_bcmring_timer1 = {
+ .name = "timer1",
+ .rating = 200,
+ .read = bcmring_get_cycles_timer1,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct clocksource clocksource_bcmring_timer3 = {
+ .name = "timer3",
+ .rating = 100,
+ .read = bcmring_get_cycles_timer3,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bcmring_clocksource_init(void)
+{
+ /* setup timer1 as free-running clocksource */
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
+ writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
+ writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+ TIMER1_VA_BASE + TIMER_CTRL);
+
+ clocksource_bcmring_timer1.mult =
+ clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
+ clocksource_bcmring_timer1.shift);
+ clocksource_register(&clocksource_bcmring_timer1);
+
+ /* setup timer3 as free-running clocksource */
+ writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+ writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+ writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+ writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+ TIMER3_VA_BASE + TIMER_CTRL);
+
+ clocksource_bcmring_timer3.mult =
+ clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
+ clocksource_bcmring_timer3.shift);
+ clocksource_register(&clocksource_bcmring_timer3);
+
+ return 0;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init bcmring_init_timer(void)
+{
+ printk(KERN_INFO "bcmring_init_timer\n");
+ /*
+ * Initialise to a known state (all timers off)
+ */
+ writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+ /*
+ * Make irqs happen for the system timer
+ */
+ setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
+
+ bcmring_clocksource_init();
+
+ timer0_clockevent.mult =
+ div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
+ timer0_clockevent.max_delta_ns =
+ clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+ timer0_clockevent.min_delta_ns =
+ clockevent_delta2ns(0xf, &timer0_clockevent);
+
+ timer0_clockevent.cpumask = cpumask_of(0);
+ clockevents_register_device(&timer0_clockevent);
+}
+
+struct sys_timer bcmring_timer = {
+ .init = bcmring_init_timer,
+};
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
new file mode 100644
index 00000000000..b197ba48e36
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.h
@@ -0,0 +1,30 @@
+/*
+ * linux/arch/arm/mach-versatile/core.h
+ *
+ * Copyright (C) 2004 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* Portions copyright Broadcom 2008 */
+#ifndef __ASM_ARCH_BCMRING_H
+#define __ASM_ARCH_BCMRING_H
+
+void __init bcmring_amba_init(void);
+void __init bcmring_map_io(void);
+void __init bcmring_init_irq(void);
+
+extern struct sys_timer bcmring_timer;
+#endif
diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile
new file mode 100644
index 00000000000..648c0377530
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/Makefile
@@ -0,0 +1,3 @@
+obj-y += dmac/
+obj-y += tmr/
+obj-y += chipc/
diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile
new file mode 100644
index 00000000000..673952768ee
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/Makefile
@@ -0,0 +1 @@
+obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
new file mode 100644
index 00000000000..b3a61d860c6
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -0,0 +1,776 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file chipcHw.c
+*
+* @brief Low level Various CHIP clock controlling routines
+*
+* @note
+*
+* These routines provide basic clock controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+/* VPM alignment algorithm uses this */
+#define MAX_PHASE_ADJUST_COUNT 0xFFFF /* Max number of times allowed to adjust the phase */
+#define MAX_PHASE_ALIGN_ATTEMPTS 10 /* Max number of attempt to align the phase */
+
+/* Local definition of clock type */
+#define PLL_CLOCK 1 /* PLL Clock */
+#define NON_PLL_CLOCK 2 /* Divider clock */
+
+static int chipcHw_divide(int num, int denom)
+ __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in hertz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ ) {
+ volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+ volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+ volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+ uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */
+ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */
+ uint32_t dependentClockType = 0;
+ uint32_t vcoHz = 0;
+
+ /* Get VCO frequencies */
+ if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ uint64_t adjustFreq = 0;
+
+ vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+ adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+ (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+ vcoFreqPll1Hz += (uint32_t) adjustFreq;
+ } else {
+ vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+ }
+ vcoFreqPll2Hz =
+ chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ switch (clock) {
+ case chipcHw_CLOCK_DDR:
+ pPLLReg = &pChipcHw->DDRClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ARM:
+ pPLLReg = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW:
+ pPLLReg = &pChipcHw->ESWClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_VPM:
+ pPLLReg = &pChipcHw->VPMClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW125:
+ pPLLReg = &pChipcHw->ESW125Clock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_UART:
+ pPLLReg = &pChipcHw->UARTClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO0:
+ pPLLReg = &pChipcHw->SDIO0Clock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO1:
+ pPLLReg = &pChipcHw->SDIO1Clock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SPI:
+ pPLLReg = &pChipcHw->SPIClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ETM:
+ pPLLReg = &pChipcHw->ETMClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_USB:
+ pPLLReg = &pChipcHw->USBClock;
+ vcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_LCD:
+ pPLLReg = &pChipcHw->LCDClock;
+ vcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_APM:
+ pPLLReg = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_BUS:
+ pClockCtrl = &pChipcHw->ACLKClock;
+ pDependentClock = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_OTP:
+ pClockCtrl = &pChipcHw->OTPClock;
+ break;
+ case chipcHw_CLOCK_I2C:
+ pClockCtrl = &pChipcHw->I2CClock;
+ break;
+ case chipcHw_CLOCK_I2S0:
+ pClockCtrl = &pChipcHw->I2S0Clock;
+ break;
+ case chipcHw_CLOCK_RTBUS:
+ pClockCtrl = &pChipcHw->RTBUSClock;
+ pDependentClock = &pChipcHw->ACLKClock;
+ dependentClockType = NON_PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_APM100:
+ pClockCtrl = &pChipcHw->APM100Clock;
+ pDependentClock = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_TSC:
+ pClockCtrl = &pChipcHw->TSCClock;
+ break;
+ case chipcHw_CLOCK_LED:
+ pClockCtrl = &pChipcHw->LEDClock;
+ break;
+ case chipcHw_CLOCK_I2S1:
+ pClockCtrl = &pChipcHw->I2S1Clock;
+ break;
+ }
+
+ if (pPLLReg) {
+ /* Obtain PLL clock frequency */
+ if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+ /* Return crystal clock frequency when bypassed */
+ return chipcHw_XTAL_FREQ_Hz;
+ } else if (clock == chipcHw_CLOCK_DDR) {
+ /* DDR frequency is configured in PLLDivider register */
+ return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+ } else {
+ /* From chip revision number B0, LCD clock is internally divided by 2 */
+ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+ vcoHz >>= 1;
+ }
+ /* Obtain PLL clock frequency using VCO dividers */
+ return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+ }
+ } else if (pClockCtrl) {
+ /* Obtain divider clock frequency */
+ uint32_t div;
+ uint32_t freq = 0;
+
+ if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+ /* Return crystal clock frequency when bypassed */
+ return chipcHw_XTAL_FREQ_Hz;
+ } else if (pDependentClock) {
+ /* Identify the dependent clock frequency */
+ switch (dependentClockType) {
+ case PLL_CLOCK:
+ if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+ /* Use crystal clock frequency when dependent PLL clock is bypassed */
+ freq = chipcHw_XTAL_FREQ_Hz;
+ } else {
+ /* Obtain PLL clock frequency using VCO dividers */
+ div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
+ freq = div ? chipcHw_divide(vcoHz, div) : 0;
+ }
+ break;
+ case NON_PLL_CLOCK:
+ if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+ freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+ } else {
+ if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+ /* Use crystal clock frequency when dependent divider clock is bypassed */
+ freq = chipcHw_XTAL_FREQ_Hz;
+ } else {
+ /* Obtain divider clock frequency using XTAL dividers */
+ div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
+ }
+ }
+ break;
+ }
+ } else {
+ /* Dependent on crystal clock */
+ freq = chipcHw_XTAL_FREQ_Hz;
+ }
+
+ div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ return chipcHw_divide(freq, (div ? div : 256));
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */
+ uint32_t freq /* [ IN ] Clock frequency in Hz */
+ ) {
+ volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+ volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+ volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+ uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */
+ uint32_t desVcoFreqPll1Hz = 0; /* Desired VCO frequency for PLL1 in Hz */
+ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */
+ uint32_t dependentClockType = 0;
+ uint32_t vcoHz = 0;
+ uint32_t desVcoHz = 0;
+
+ /* Get VCO frequencies */
+ if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ uint64_t adjustFreq = 0;
+
+ vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+ adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+ (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+ vcoFreqPll1Hz += (uint32_t) adjustFreq;
+
+ /* Desired VCO frequency */
+ desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
+ } else {
+ vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+ }
+ vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ switch (clock) {
+ case chipcHw_CLOCK_DDR:
+ /* Configure the DDR_ctrl:BUS ratio settings */
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Dvide DDR_phy by two to obtain DDR_ctrl clock */
+ pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+ << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ pPLLReg = &pChipcHw->DDRClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ARM:
+ pPLLReg = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW:
+ pPLLReg = &pChipcHw->ESWClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_VPM:
+ /* Configure the VPM:BUS ratio settings */
+ {
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+ << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ pPLLReg = &pChipcHw->VPMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW125:
+ pPLLReg = &pChipcHw->ESW125Clock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_UART:
+ pPLLReg = &pChipcHw->UARTClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO0:
+ pPLLReg = &pChipcHw->SDIO0Clock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO1:
+ pPLLReg = &pChipcHw->SDIO1Clock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SPI:
+ pPLLReg = &pChipcHw->SPIClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ETM:
+ pPLLReg = &pChipcHw->ETMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_USB:
+ pPLLReg = &pChipcHw->USBClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_LCD:
+ pPLLReg = &pChipcHw->LCDClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_APM:
+ pPLLReg = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_BUS:
+ pClockCtrl = &pChipcHw->ACLKClock;
+ pDependentClock = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_OTP:
+ pClockCtrl = &pChipcHw->OTPClock;
+ break;
+ case chipcHw_CLOCK_I2C:
+ pClockCtrl = &pChipcHw->I2CClock;
+ break;
+ case chipcHw_CLOCK_I2S0:
+ pClockCtrl = &pChipcHw->I2S0Clock;
+ break;
+ case chipcHw_CLOCK_RTBUS:
+ pClockCtrl = &pChipcHw->RTBUSClock;
+ pDependentClock = &pChipcHw->ACLKClock;
+ dependentClockType = NON_PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_APM100:
+ pClockCtrl = &pChipcHw->APM100Clock;
+ pDependentClock = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_TSC:
+ pClockCtrl = &pChipcHw->TSCClock;
+ break;
+ case chipcHw_CLOCK_LED:
+ pClockCtrl = &pChipcHw->LEDClock;
+ break;
+ case chipcHw_CLOCK_I2S1:
+ pClockCtrl = &pChipcHw->I2S1Clock;
+ break;
+ }
+
+ if (pPLLReg) {
+ /* Select XTAL as bypass source */
+ reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
+ reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ /* For DDR settings use only the PLL divider clock */
+ if (pPLLReg == &pChipcHw->DDRClock) {
+ /* Set M1DIV for PLL1, which controls the DDR clock */
+ reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
+ /* Calculate expected frequency */
+ freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+ } else {
+ /* From chip revision number B0, LCD clock is internally divided by 2 */
+ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+ desVcoHz >>= 1;
+ vcoHz >>= 1;
+ }
+ /* Set MDIV to change the frequency */
+ reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
+ reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
+ /* Calculate expected frequency */
+ freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+ }
+ /* Wait for for atleast 200ns as per the protocol to change frequency */
+ udelay(1);
+ /* Do not bypass */
+ reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ /* Return the configured frequency */
+ return freq;
+ } else if (pClockCtrl) {
+ uint32_t divider = 0;
+
+ /* Divider clock should not be bypassed */
+ reg32_modify_and(pClockCtrl,
+ ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+
+ /* Identify the clock source */
+ if (pDependentClock) {
+ switch (dependentClockType) {
+ case PLL_CLOCK:
+ divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
+ break;
+ case NON_PLL_CLOCK:
+ {
+ uint32_t sourceClock = 0;
+
+ if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+ sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+ } else {
+ uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
+ }
+ divider = chipcHw_divide(sourceClock, freq);
+ }
+ break;
+ }
+ } else {
+ divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
+ }
+
+ if (divider) {
+ REG_LOCAL_IRQ_SAVE;
+ /* Set the divider to obtain the required frequency */
+ *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
+ REG_LOCAL_IRQ_RESTORE;
+ return freq;
+ }
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(chipcHw_setClockFrequency);
+
+/****************************************************************************/
+/**
+* @brief Set VPM clock in sync with BUS clock for Chip Rev #A0
+*
+* This function does the phase adjustment between VPM and BUS clock
+*
+* @return >= 0 : On success (# of adjustment required)
+* -1 : On failure
+*
+*/
+/****************************************************************************/
+static int vpmPhaseAlignA0(void)
+{
+ uint32_t phaseControl;
+ uint32_t phaseValue;
+ uint32_t prevPhaseComp;
+ int iter = 0;
+ int adjustCount = 0;
+ int count = 0;
+
+ for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
+ phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
+ phaseValue = 0;
+ prevPhaseComp = 0;
+
+ /* Step 1: Look for falling PH_COMP transition */
+
+ /* Read the contents of VPM Clock resgister */
+ phaseValue = pChipcHw->VPMClock;
+ do {
+ /* Store previous value of phase comparator */
+ prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
+ /* Change the value of PH_CTRL. */
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ /* Read the contents of VPM Clock resgister. */
+ phaseValue = pChipcHw->VPMClock;
+
+ if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ } else {
+ /* Increment to the Phase count value for next write, if Phase is not stable. */
+ phaseControl = (0x3F & (phaseControl + 1));
+ }
+ /* Count number of adjustment made */
+ adjustCount++;
+ } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || /* Look for a transition */
+ ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && /* Look for a falling edge */
+ (adjustCount < MAX_PHASE_ADJUST_COUNT) /* Do not exceed the limit while trying */
+ );
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ /* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
+
+ for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+ phaseControl = (0x3F & (phaseControl + 1));
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ phaseValue = pChipcHw->VPMClock;
+ /* Count number of adjustment made */
+ adjustCount++;
+ }
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ if (count != 5) {
+ /* Detected false transition */
+ continue;
+ }
+
+ /* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
+
+ for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ phaseValue = pChipcHw->VPMClock;
+ /* Count number of adjustment made */
+ adjustCount++;
+ }
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ if (count != 3) {
+ /* Detected noisy transition */
+ continue;
+ }
+
+ /* Step 4: Keep moving backward before the original transition took place. */
+
+ for (count = 0; (count < 5); count++) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ phaseValue = pChipcHw->VPMClock;
+ /* Count number of adjustment made */
+ adjustCount++;
+ }
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
+ /* Detected false transition */
+ continue;
+ }
+
+ /* Step 5: Re discover the valid transition */
+
+ do {
+ /* Store previous value of phase comparator */
+ prevPhaseComp = phaseValue;
+ /* Change the value of PH_CTRL. */
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^=
+ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ /* Read the contents of VPM Clock resgister. */
+ phaseValue = pChipcHw->VPMClock;
+
+ if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ } else {
+ /* Increment to the Phase count value for next write, if Phase is not stable. */
+ phaseControl = (0x3F & (phaseControl + 1));
+ }
+
+ /* Count number of adjustment made */
+ adjustCount++;
+ } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ } else {
+ /* Valid phase must have detected */
+ break;
+ }
+ }
+
+ /* For VPM Phase should be perfectly aligned. */
+ phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
+ /* Load new phase value */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ /* Return the status */
+ return (int)adjustCount;
+}
+
+/****************************************************************************/
+/**
+* @brief Set VPM clock in sync with BUS clock
+*
+* This function does the phase adjustment between VPM and BUS clock
+*
+* @return >= 0 : On success (# of adjustment required)
+* -1 : On failure
+*
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void)
+{
+
+ if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
+ return vpmPhaseAlignA0();
+ } else {
+ uint32_t phaseControl = chipcHw_getVpmPhaseControl();
+ uint32_t phaseValue = 0;
+ int adjustCount = 0;
+
+ /* Disable VPM access */
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ /* Disable HW VPM phase alignment */
+ chipcHw_vpmHwPhaseAlignDisable();
+ /* Enable SW VPM phase alignment */
+ chipcHw_vpmSwPhaseAlignEnable();
+ /* Adjust VPM phase */
+ while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
+ phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
+
+ /* Adjust phase control value */
+ if (phaseValue > 0xF) {
+ /* Increment phase control value */
+ phaseControl++;
+ } else if (phaseValue < 0xF) {
+ /* Decrement phase control value */
+ phaseControl--;
+ } else {
+ /* Enable VPM access */
+ pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ /* Return adjust count */
+ return adjustCount;
+ }
+ /* Change the value of PH_CTRL. */
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ /* Count adjustment */
+ adjustCount++;
+ }
+ }
+
+ /* Disable VPM access */
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ return -1;
+}
+
+/****************************************************************************/
+/**
+* @brief Local Divide function
+*
+* This function does the divide
+*
+* @return divide value
+*
+*/
+/****************************************************************************/
+static int chipcHw_divide(int num, int denom)
+{
+ int r;
+ int t = 1;
+
+ /* Shift denom and t up to the largest value to optimize algorithm */
+ /* t contains the units of each divide */
+ while ((denom & 0x40000000) == 0) { /* fails if denom=0 */
+ denom = denom << 1;
+ t = t << 1;
+ }
+
+ /* Intialize the result */
+ r = 0;
+
+ do {
+ /* Determine if there exists a positive remainder */
+ if ((num - denom) >= 0) {
+ /* Accumlate t to the result and calculate a new remainder */
+ num = num - denom;
+ r = r + t;
+ }
+ /* Continue to shift denom and shift t down to 0 */
+ denom = denom >> 1;
+ t = t >> 1;
+ } while (t != 0);
+
+ return r;
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
new file mode 100644
index 00000000000..367df75d4bb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
@@ -0,0 +1,293 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file chipcHw_init.c
+*
+* @brief Low level CHIPC PLL configuration functions
+*
+* @note
+*
+* These routines provide basic PLL controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+/* ---- Private Constants and Types --------------------------------------- */
+
+/*
+ Calculation for NDIV_i to obtain VCO frequency
+ -----------------------------------------------
+
+ Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
+ for Freq_vco = VCO_FREQ_MHz
+ Freq_ref = chipcHw_XTAL_FREQ_Hz
+ PLL_P1 = PLL_P2 = 1
+ and
+ PLL_NDIV_f = 0
+
+ We get:
+ PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
+
+ Calculation for PLL MDIV to obtain frequency Freq_x for channel x
+ -----------------------------------------------------------------
+ Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
+
+ PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
+*/
+
+/* ---- Private Variables ------------------------------------------------- */
+/****************************************************************************/
+/**
+* @brief Initializes the PLL2
+*
+* This function initializes the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz)
+{
+ uint32_t pllPreDivider2 = 0;
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig2 =
+ chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET;
+
+ pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+ (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+ chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+ chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+
+ /* Enable CHIPC registers to control the PLL */
+ pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+ /* Set pre divider to get desired VCO frequency */
+ pChipcHw->PLLPreDivider2 = pllPreDivider2;
+ /* Set NDIV Frac */
+ pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
+
+ /* This has to be removed once the default values are fixed for PLL2. */
+ pChipcHw->PLLControl12 = 0x38000700;
+ pChipcHw->PLLControl22 = 0x00000015;
+
+ /* Reset PLL2 */
+ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+ pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ } else {
+ pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ }
+ REG_LOCAL_IRQ_RESTORE;
+ }
+
+ /* Insert certain amount of delay before deasserting ARESET. */
+ udelay(1);
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Remove analog reset and Power on the PLL */
+ pChipcHw->PLLConfig2 &=
+ ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+
+ REG_LOCAL_IRQ_RESTORE;
+
+ }
+
+ /* Wait until PLL is locked */
+ while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+ ;
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Remove digital reset */
+ pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+EXPORT_SYMBOL(chipcHw_pll2Enable);
+
+/****************************************************************************/
+/**
+* @brief Initializes the PLL1
+*
+* This function initializes the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
+{
+ uint32_t pllPreDivider = 0;
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->PLLConfig =
+ chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET;
+ /* Setting VCO frequency */
+ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+ pllPreDivider =
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
+ ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
+ 1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+ chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+ chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+ } else {
+ pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+ (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+ chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+ chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+ }
+
+ /* Enable CHIPC registers to control the PLL */
+ pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+ /* Set pre divider to get desired VCO frequency */
+ pChipcHw->PLLPreDivider = pllPreDivider;
+ /* Set NDIV Frac */
+ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+ pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+ chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
+ } else {
+ pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+ chipcHw_REG_PLL_DIVIDER_NDIV_f;
+ }
+
+ /* Reset PLL1 */
+ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+ pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ } else {
+ pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ }
+
+ REG_LOCAL_IRQ_RESTORE;
+
+ /* Insert certain amount of delay before deasserting ARESET. */
+ udelay(1);
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Remove analog reset and Power on the PLL */
+ pChipcHw->PLLConfig &=
+ ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+ REG_LOCAL_IRQ_RESTORE;
+ }
+
+ /* Wait until PLL is locked */
+ while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
+ || !(pChipcHw->
+ PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+ ;
+
+ /* Remove digital reset */
+ {
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ }
+}
+
+EXPORT_SYMBOL(chipcHw_pll1Enable);
+
+/****************************************************************************/
+/**
+* @brief Initializes the chipc module
+*
+* This function initializes the PLLs and core system clocks
+*
+*/
+/****************************************************************************/
+
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */
+ ) {
+#if !(defined(__KERNEL__) && !defined(STANDALONE))
+ delay_init();
+#endif
+
+ /* Do not program PLL, when warm reset */
+ if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
+ chipcHw_pll1Enable(initParam->pllVcoFreqHz,
+ initParam->ssSupport);
+ chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
+ } else {
+ /* Clear sticky bits */
+ chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
+ }
+ /* Clear sticky bits */
+ chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
+
+ /* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
+ pChipcHw->ACLKClock =
+ (pChipcHw->
+ ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
+ armBusRatio &
+ chipcHw_REG_ACLKClock_CLK_DIV_MASK);
+
+ /* Set various core component frequencies. The order in which this is done is important for some. */
+ /* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
+ /* frequency to find its ratio with the BUS. Hence we must set the ARM first, followed by the BUS, */
+ /* then VPM and RTBUS. */
+
+ chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
+ initParam->busClockFreqHz *
+ initParam->armBusRatio);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
+ initParam->busClockFreqHz *
+ initParam->vpmBusRatio);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
+ initParam->busClockFreqHz *
+ initParam->ddrBusRatio);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
+ initParam->busClockFreqHz / 2);
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
new file mode 100644
index 00000000000..2671d8896bb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
@@ -0,0 +1,124 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <csp/intcHw.h>
+#include <csp/cache.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+/* ---- Private Variables ------------------------------------------------- */
+void chipcHw_reset_run_from_aram(void);
+
+typedef void (*RUNFUNC) (void);
+
+/****************************************************************************/
+/**
+* @brief warmReset
+*
+* @note warmReset configures the clocks which are not reset back to the state
+* required to execute on reset. To do so we need to copy the code into internal
+* memory to change the ARM clock while we are not executing from DDR.
+*/
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask)
+{
+ int i = 0;
+ RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
+
+ /* Disable all interrupts */
+ intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
+ intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
+ intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
+ chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+ /* Bypass the PLL clocks before reboot */
+ pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+ pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+
+ /* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
+ do {
+ ((uint32_t *) MM_IO_BASE_ARAM)[i] =
+ ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
+ i++;
+ } while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */
+
+ CSP_CACHE_FLUSH_ALL;
+
+ /* run the function from ARAM */
+ runFunc();
+
+ /* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+/* This function must run from internal memory */
+void chipcHw_reset_run_from_aram(void)
+{
+/* Make sure, pipeline is filled with instructions coming from ARAM */
+__asm (" nop \n\t"
+ " nop \n\t"
+#if defined(__KERNEL__) && !defined(STANDALONE)
+ " MRC p15,#0x0,r0,c1,c0,#0 \n\t"
+ " BIC r0,r0,#0xd \n\t"
+ " MCR p15,#0x0,r0,c1,c0,#0 \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+#endif
+ " nop \n\t"
+ " nop \n\t"
+/* Bypass the ARM clock and switch to XTAL clock */
+ " MOV r2,#0x80000000 \n\t"
+ " LDR r3,[r2,#8] \n\t"
+ " ORR r3,r3,#0x20000 \n\t"
+ " STR r3,[r2,#8] \n\t"
+
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+/* Issue reset */
+ " MOV r3,#0x2 \n\t"
+ " STR r3,[r2,#0x80] \n\t"
+/* End here */
+ " MOV pc,pc \n\t");
+/* 0xe1a0f00f == asm ("mov r15, r15"); */
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
new file mode 100644
index 00000000000..54ad964fe94
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
@@ -0,0 +1,64 @@
+/*****************************************************************************
+* Copyright 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+/****************************************************************************/
+/**
+* @file chipcHw_str.c
+*
+* @brief Contains strings which are useful to linux and csp
+*
+* @note
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+static const char *gMuxStr[] = {
+ "GPIO", /* 0 */
+ "KeyPad", /* 1 */
+ "I2C-Host", /* 2 */
+ "SPI", /* 3 */
+ "Uart", /* 4 */
+ "LED-Mtx-P", /* 5 */
+ "LED-Mtx-S", /* 6 */
+ "SDIO-0", /* 7 */
+ "SDIO-1", /* 8 */
+ "PCM", /* 9 */
+ "I2S", /* 10 */
+ "ETM", /* 11 */
+ "Debug", /* 12 */
+ "Misc", /* 13 */
+ "0xE", /* 14 */
+ "0xF", /* 15 */
+};
+
+/****************************************************************************/
+/**
+* @brief Retrieves a string representation of the mux setting for a pin.
+*
+* @return Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin)
+{
+ if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
+ return "";
+ }
+
+ return gMuxStr[chipcHw_getGpioPinFunction(pin)];
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile
new file mode 100644
index 00000000000..fb1104fe56b
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/Makefile
@@ -0,0 +1 @@
+obj-y += dmacHw.o dmacHw_extra.o \ No newline at end of file
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
new file mode 100644
index 00000000000..7b9bac2d79a
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -0,0 +1,917 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw.c
+*
+* @brief Low level DMA controller driver routines
+*
+* @note
+*
+* These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/string.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* Allocate DMA control blocks */
+dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
+
+uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
+uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
+
+/****************************************************************************/
+/**
+* @brief Get maximum FIFO for a DMA channel
+*
+* @return Maximum allowable FIFO size
+*
+*
+*/
+/****************************************************************************/
+static uint32_t GetFifoSize(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ uint32_t val = 0;
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_MISC_t *pMiscReg =
+ (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
+
+ switch (pCblk->channel) {
+ case 0:
+ val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
+ break;
+ case 1:
+ val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
+ break;
+ case 2:
+ val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
+ break;
+ case 3:
+ val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
+ break;
+ case 4:
+ val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
+ break;
+ case 5:
+ val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
+ break;
+ case 6:
+ val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
+ break;
+ case 7:
+ val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
+ break;
+ }
+
+ if (val <= 0x4) {
+ return 8 << val;
+ } else {
+ dmacHw_ASSERT(0);
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Program channel register to initiate transfer
+*
+* @return void
+*
+*
+* @note
+* - Descriptor buffer MUST ALWAYS be flushed before calling this function
+* - This function should also be called from ISR to program the channel with
+* pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ dmacHw_DESC_RING_t *pRing;
+ dmacHw_DESC_t *pProg;
+ dmacHw_CBLK_t *pCblk;
+
+ pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+ /* Not safe yet to program the channel */
+ return;
+ }
+
+ if (pCblk->varDataStarted) {
+ if (pCblk->descUpdated) {
+ pCblk->descUpdated = 0;
+ pProg =
+ (dmacHw_DESC_t *) ((uint32_t)
+ dmacHw_REG_LLP(pCblk->module,
+ pCblk->channel) +
+ pRing->virt2PhyOffset);
+
+ /* Load descriptor if not loaded */
+ if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
+ dmacHw_SET_SAR(pCblk->module, pCblk->channel,
+ pProg->sar);
+ dmacHw_SET_DAR(pCblk->module, pCblk->channel,
+ pProg->dar);
+ dmacHw_REG_CTL_LO(pCblk->module,
+ pCblk->channel) =
+ pProg->ctl.lo;
+ dmacHw_REG_CTL_HI(pCblk->module,
+ pCblk->channel) =
+ pProg->ctl.hi;
+ } else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
+ /* Return as end descriptor is processed */
+ return;
+ } else {
+ dmacHw_ASSERT(0);
+ }
+ } else {
+ return;
+ }
+ } else {
+ if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
+ /* Do not make a single chain, rather process one descriptor at a time */
+ pProg = pRing->pHead;
+ /* Point to the next descriptor for next iteration */
+ dmacHw_NEXT_DESC(pRing, pHead);
+ } else {
+ /* Return if no more pending descriptor */
+ if (pRing->pEnd == NULL) {
+ return;
+ }
+
+ pProg = pRing->pProg;
+ if (pConfig->transferMode ==
+ dmacHw_TRANSFER_MODE_CONTINUOUS) {
+ /* Make sure a complete ring can be formed */
+ dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
+ llp == pRing->pProg);
+ /* Make sure pProg pointing to the pHead */
+ dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
+ pRing->pHead);
+ /* Make a complete ring */
+ do {
+ pRing->pProg->ctl.lo |=
+ (dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN);
+ pRing->pProg =
+ (dmacHw_DESC_t *) pRing->pProg->llp;
+ } while (pRing->pProg != pRing->pHead);
+ } else {
+ /* Make a single long chain */
+ while (pRing->pProg != pRing->pEnd) {
+ pRing->pProg->ctl.lo |=
+ (dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN);
+ pRing->pProg =
+ (dmacHw_DESC_t *) pRing->pProg->llp;
+ }
+ }
+ }
+
+ /* Program the channel registers */
+ dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
+ dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
+ dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+ (uint32_t) pProg - pRing->virt2PhyOffset);
+ dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
+ pProg->ctl.lo;
+ dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
+ pProg->ctl.hi;
+ if (pRing->pEnd) {
+ /* Remember the descriptor to use next */
+ pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
+ }
+ /* Indicate no more pending descriptor */
+ pRing->pEnd = (dmacHw_DESC_t *) NULL;
+ }
+ /* Start DMA operation */
+ dmacHw_DMA_START(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+* @brief Initializes DMA
+*
+* This function initializes DMA CSP driver
+*
+* @note
+* Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void)
+{
+
+ uint32_t i = 0;
+
+ dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
+ dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
+
+ /* Enable access to the DMA block */
+ chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
+ chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
+
+ if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
+ dmacHw_ASSERT(0);
+ }
+
+ memset((void *)dmacHw_gCblk, 0,
+ sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
+ for (i = 0; i < dmaChannelCount_0; i++) {
+ dmacHw_gCblk[i].module = 0;
+ dmacHw_gCblk[i].channel = i;
+ }
+ for (i = 0; i < dmaChannelCount_1; i++) {
+ dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
+ dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Exit function for DMA
+*
+* This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void)
+{
+ /* Disable access to the DMA block */
+ chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
+ chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
+}
+
+/****************************************************************************/
+/**
+* @brief Gets a handle to a DMA channel
+*
+* This function returns a handle, representing a control block of a particular DMA channel
+*
+* @return -1 - On Failure
+* handle - On Success, representing a channel control block
+*
+* @note
+* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */
+ ) {
+ int idx;
+
+ switch ((channelId >> 8)) {
+ case 0:
+ dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
+ idx = (channelId & 0xff);
+ break;
+ case 1:
+ dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
+ idx = dmaChannelCount_0 + (channelId & 0xff);
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ return (dmacHw_HANDLE_t) -1;
+ }
+
+ return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
+}
+
+/****************************************************************************/
+/**
+* @brief Initializes a DMA channel for use
+*
+* This function initializes and resets a DMA channel for use
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ int module = pCblk->module;
+ int channel = pCblk->channel;
+
+ /* Reinitialize the control block */
+ memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
+ pCblk->module = module;
+ pCblk->channel = channel;
+
+ /* Enable DMA controller */
+ dmacHw_DMA_ENABLE(pCblk->module);
+ /* Reset DMA channel */
+ dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
+ dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
+ dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
+ dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
+
+ /* Clear all raw interrupt status */
+ dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+ /* Mask event specific interrupts */
+ dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Finds amount of memory required to form a descriptor ring
+*
+*
+* @return Number of bytes required to form a descriptor ring
+*
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */
+ ) {
+ /* Need extra 4 byte to ensure 32 bit alignment */
+ return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
+ sizeof(uint32_t);
+}
+
+/****************************************************************************/
+/**
+* @brief Initializes descriptor ring
+*
+* This function will initializes the descriptor ring of a DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+* @note
+* - "len" parameter should be obtained from "dmacHw_descriptorLen"
+* - Descriptor buffer MUST be 32 bit aligned and uncached as it is
+* accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+ uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+ uint32_t len, /* [ IN ] Size of the pBuf */
+ uint32_t num /* [ IN ] Number of descriptor in the ring */
+ ) {
+ uint32_t i;
+ dmacHw_DESC_RING_t *pRing;
+ dmacHw_DESC_t *pDesc;
+
+ /* Check the alignment of the descriptor */
+ if ((uint32_t) pDescriptorVirt & 0x00000003) {
+ dmacHw_ASSERT(0);
+ return -1;
+ }
+
+ /* Check if enough space has been allocated for descriptor ring */
+ if (len < dmacHw_descriptorLen(num)) {
+ return -1;
+ }
+
+ pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
+ pRing->pHead =
+ (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
+ pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+ pRing->pProg = dmacHw_DESC_INIT;
+ /* Initialize link item chain, starting from the head */
+ pDesc = pRing->pHead;
+ /* Find the offset between virtual to physical address */
+ pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
+
+ /* Form the descriptor ring */
+ for (i = 0; i < num - 1; i++) {
+ /* Clear link list item */
+ memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+ /* Point to the next item in the physical address */
+ pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
+ /* Point to the next item in the virtual address */
+ pDesc->llp = (uint32_t) (pDesc + 1);
+ /* Mark descriptor is ready to use */
+ pDesc->ctl.hi = dmacHw_DESC_FREE;
+ /* Look into next link list item */
+ pDesc++;
+ }
+
+ /* Clear last link list item */
+ memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+ /* Last item pointing to the first item in the
+ physical address to complete the ring */
+ pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
+ /* Last item pointing to the first item in the
+ virtual address to complete the ring
+ */
+ pDesc->llp = (uint32_t) pRing->pHead;
+ /* Mark descriptor is ready to use */
+ pDesc->ctl.hi = dmacHw_DESC_FREE;
+ /* Set the number of descriptors in the ring */
+ pRing->num = num;
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Configure DMA channel
+*
+* @return 0 : On success
+* -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ uint32_t cfgHigh = 0;
+ int srcTrSize;
+ int dstTrSize;
+
+ pCblk->varDataStarted = 0;
+ pCblk->userData = NULL;
+
+ /* Configure
+ - Burst transaction when enough data in available in FIFO
+ - AHB Access protection 1
+ - Source and destination peripheral ports
+ */
+ cfgHigh =
+ dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
+ dmacHw_SRC_PERI_INTF(pConfig->
+ srcPeripheralPort) |
+ dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
+ /* Set priority */
+ dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
+ pConfig->channelPriority);
+
+ if (pConfig->dstStatusRegisterAddress != 0) {
+ /* Destination status update enable */
+ cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
+ /* Configure status registers */
+ dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
+ pConfig->dstStatusRegisterAddress);
+ }
+
+ if (pConfig->srcStatusRegisterAddress != 0) {
+ /* Source status update enable */
+ cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
+ /* Source status update enable */
+ dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
+ pConfig->srcStatusRegisterAddress);
+ }
+ /* Configure the config high register */
+ dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
+
+ /* Clear all raw interrupt status */
+ dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+ /* Configure block interrupt */
+ if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+ dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
+ } else {
+ dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+ }
+ /* Configure complete transfer interrupt */
+ if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+ dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
+ } else {
+ dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ }
+ /* Configure error interrupt */
+ if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
+ dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
+ } else {
+ dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+ }
+ /* Configure gather register */
+ if (pConfig->srcGatherWidth) {
+ srcTrSize =
+ dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+ if (!
+ ((pConfig->srcGatherWidth % srcTrSize)
+ && (pConfig->srcGatherJump % srcTrSize))) {
+ dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
+ ((pConfig->srcGatherWidth /
+ srcTrSize) << 20) | (pConfig->srcGatherJump /
+ srcTrSize);
+ } else {
+ return -1;
+ }
+ }
+ /* Configure scatter register */
+ if (pConfig->dstScatterWidth) {
+ dstTrSize =
+ dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+ if (!
+ ((pConfig->dstScatterWidth % dstTrSize)
+ && (pConfig->dstScatterJump % dstTrSize))) {
+ dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
+ ((pConfig->dstScatterWidth /
+ dstTrSize) << 20) | (pConfig->dstScatterJump /
+ dstTrSize);
+ } else {
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Indicates whether DMA transfer is in progress or completed
+*
+* @return DMA transfer status
+* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing
+* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed
+* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+ return dmacHw_TRANSFER_STATUS_BUSY;
+ } else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
+ (0x00000001 << pCblk->channel)) {
+ return dmacHw_TRANSFER_STATUS_ERROR;
+ }
+
+ return dmacHw_TRANSFER_STATUS_DONE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set descriptors for known data length
+*
+* When DMA has to work as a flow controller, this function prepares the
+* descriptor chain to transfer data
+*
+* from:
+* - Memory to memory
+* - Peripheral to memory
+* - Memory to Peripheral
+* - Peripheral to Peripheral
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ ) {
+ dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+ dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ dmacHw_DESC_t *pStart;
+ dmacHw_DESC_t *pProg;
+ int srcTs = 0;
+ int blkTs = 0;
+ int oddSize = 0;
+ int descCount = 0;
+ int count = 0;
+ int dstTrSize = 0;
+ int srcTrSize = 0;
+ uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+
+ dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+ /* Skip Tx if buffer is NULL or length is unknown */
+ if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+ /* Do not initiate transfer */
+ return -1;
+ }
+
+ /* Ensure scatter and gather are transaction aligned */
+ if ((pConfig->srcGatherWidth % srcTrSize)
+ || (pConfig->dstScatterWidth % dstTrSize)) {
+ return -2;
+ }
+
+ /*
+ Background 1: DMAC can not perform DMA if source and destination addresses are
+ not properly aligned with the channel's transaction width. So, for successful
+ DMA transfer, transaction width must be set according to the alignment of the
+ source and destination address.
+ */
+
+ /* Adjust destination transaction width if destination address is not aligned properly */
+ dstTrWidth = pConfig->dstMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+ dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+ dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+ }
+
+ /* Adjust source transaction width if source address is not aligned properly */
+ srcTrWidth = pConfig->srcMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+ srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+ }
+
+ /* Find the maximum transaction per descriptor */
+ if (pConfig->maxDataPerBlock
+ && ((pConfig->maxDataPerBlock / srcTrSize) <
+ dmacHw_MAX_BLOCKSIZE)) {
+ maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+ }
+
+ /* Find number of source transactions needed to complete the DMA transfer */
+ srcTs = dataLen / srcTrSize;
+ /* Find the odd number of bytes that need to be transferred as single byte transaction width */
+ if (srcTs && (dstTrSize > srcTrSize)) {
+ oddSize = dataLen % dstTrSize;
+ /* Adjust source transaction count due to "oddSize" */
+ srcTs = srcTs - (oddSize / srcTrSize);
+ } else {
+ oddSize = dataLen % srcTrSize;
+ }
+ /* Adjust "descCount" due to "oddSize" */
+ if (oddSize) {
+ descCount++;
+ }
+ /* Find the number of descriptor needed for total "srcTs" */
+ if (srcTs) {
+ descCount += ((srcTs - 1) / maxBlockSize) + 1;
+ }
+
+ /* Check the availability of "descCount" discriptors in the ring */
+ pProg = pRing->pHead;
+ for (count = 0; (descCount <= pRing->num) && (count < descCount);
+ count++) {
+ if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
+ /* Sufficient descriptors are not available */
+ return -3;
+ }
+ pProg = (dmacHw_DESC_t *) pProg->llp;
+ }
+
+ /* Remember the link list item to program the channel registers */
+ pStart = pProg = pRing->pHead;
+ /* Make a link list with "descCount(=count)" number of descriptors */
+ while (count) {
+ /* Reset channel control information */
+ pProg->ctl.lo = 0;
+ /* Enable source gather if configured */
+ if (pConfig->srcGatherWidth) {
+ pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
+ }
+ /* Enable destination scatter if configured */
+ if (pConfig->dstScatterWidth) {
+ pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
+ }
+ /* Set source and destination address */
+ pProg->sar = (uint32_t) pSrcAddr;
+ pProg->dar = (uint32_t) pDstAddr;
+ /* Use "devCtl" to mark that user memory need to be freed later if needed */
+ if (pProg == pRing->pHead) {
+ pProg->devCtl = dmacHw_FREE_USER_MEMORY;
+ } else {
+ pProg->devCtl = 0;
+ }
+
+ blkTs = srcTs;
+
+ /* Special treatmeant for last descriptor */
+ if (count == 1) {
+ /* Mark the last descriptor */
+ pProg->ctl.lo &=
+ ~(dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN);
+ /* Treatment for odd data bytes */
+ if (oddSize) {
+ /* Adjust for single byte transaction width */
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ dstTrWidth =
+ dmacHw_DST_TRANSACTION_WIDTH_8;
+ blkTs =
+ (oddSize / srcTrSize) +
+ ((oddSize % srcTrSize) ? 1 : 0);
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ srcTrWidth =
+ dmacHw_SRC_TRANSACTION_WIDTH_8;
+ blkTs = oddSize;
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+ srcTrWidth =
+ dmacHw_SRC_TRANSACTION_WIDTH_8;
+ dstTrWidth =
+ dmacHw_DST_TRANSACTION_WIDTH_8;
+ blkTs = oddSize;
+ break;
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+ /* Do not adjust the transaction width */
+ break;
+ }
+ } else {
+ srcTs -= blkTs;
+ }
+ } else {
+ if (srcTs / maxBlockSize) {
+ blkTs = maxBlockSize;
+ }
+ /* Remaining source transactions for next iteration */
+ srcTs -= blkTs;
+ }
+ /* Must have a valid source transactions */
+ dmacHw_ASSERT(blkTs > 0);
+ /* Set control information */
+ if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+ pProg->ctl.lo |= pConfig->transferType |
+ pConfig->srcUpdate |
+ pConfig->dstUpdate |
+ srcTrWidth |
+ dstTrWidth |
+ pConfig->srcMaxBurstWidth |
+ pConfig->dstMaxBurstWidth |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+ } else {
+ uint32_t transferType = 0;
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ pProg->ctl.lo |= transferType |
+ pConfig->srcUpdate |
+ pConfig->dstUpdate |
+ srcTrWidth |
+ dstTrWidth |
+ pConfig->srcMaxBurstWidth |
+ pConfig->dstMaxBurstWidth |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+ }
+
+ /* Set block transaction size */
+ pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+ /* Look for next descriptor */
+ if (count > 1) {
+ /* Point to the next descriptor */
+ pProg = (dmacHw_DESC_t *) pProg->llp;
+
+ /* Update source and destination address for next iteration */
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ if (pConfig->dstScatterWidth) {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->dstScatterWidth) *
+ pConfig->dstScatterJump);
+ } else {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize;
+ }
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ if (pConfig->srcGatherWidth) {
+ pSrcAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->srcGatherWidth) *
+ pConfig->srcGatherJump);
+ } else {
+ pSrcAddr =
+ (char *)pSrcAddr +
+ blkTs * srcTrSize;
+ }
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+ if (pConfig->dstScatterWidth) {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->dstScatterWidth) *
+ pConfig->dstScatterJump);
+ } else {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize;
+ }
+
+ if (pConfig->srcGatherWidth) {
+ pSrcAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->srcGatherWidth) *
+ pConfig->srcGatherJump);
+ } else {
+ pSrcAddr =
+ (char *)pSrcAddr +
+ blkTs * srcTrSize;
+ }
+ break;
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+ /* Do not adjust the address */
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ } else {
+ /* At the end of transfer "srcTs" must be zero */
+ dmacHw_ASSERT(srcTs == 0);
+ }
+ count--;
+ }
+
+ /* Remember the descriptor to initialize the registers */
+ if (pRing->pProg == dmacHw_DESC_INIT) {
+ pRing->pProg = pStart;
+ }
+ /* Indicate that the descriptor is updated */
+ pRing->pEnd = pProg;
+ /* Head pointing to the next descriptor */
+ pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
+ /* Update Tail pointer if destination is a peripheral,
+ because no one is going to read from the pTail
+ */
+ if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+ pRing->pTail = pRing->pHead;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Provides DMA controller attributes
+*
+*
+* @return DMA controller attributes
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ switch (attr) {
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
+ return dmacHw_GET_NUM_CHANNEL(pCblk->module);
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
+ return (1 <<
+ (dmacHw_GET_MAX_BLOCK_SIZE
+ (pCblk->module, pCblk->module) + 2)) - 8;
+ case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
+ return dmacHw_GET_NUM_INTERFACE(pCblk->module);
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
+ return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
+ pCblk->channel);
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
+ return GetFifoSize(handle);
+ }
+ dmacHw_ASSERT(0);
+ return 0;
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
new file mode 100644
index 00000000000..ff7b436d093
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -0,0 +1,1017 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_extra.c
+*
+* @brief Extra Low level DMA controller driver routines
+*
+* @note
+*
+* These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+
+extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT]; /* Declared in dmacHw.c */
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* ---- Internal Use Function Prototypes --------------------------------- */
+/****************************************************************************/
+/**
+* @brief Overwrites data length in the descriptor
+*
+* This function overwrites data length in the descriptor
+*
+*
+* @return void
+*
+* @note
+* This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Helper function to display DMA registers
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static void DisplayRegisterContents(int module, /* [ IN ] DMA Controller unit (0-1) */
+ int channel, /* [ IN ] DMA Channel (0-7) / -1(all) */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */
+ ) {
+ int chan;
+
+ (*fpPrint) ("Displaying register content \n\n");
+ (*fpPrint) ("Module %d: Interrupt raw transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt raw src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt stat transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt stat src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt mask transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt mask src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt clear transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt clear src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: SW source req 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest req 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
+ (*fpPrint) ("Module %d: SW source signal 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest signal 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
+ (*fpPrint) ("Module %d: SW source last 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest last 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: misc config 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
+ (*fpPrint) ("Module %d: misc channel enable 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
+ (*fpPrint) ("Module %d: misc ID 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
+ (*fpPrint) ("Module %d: misc test 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
+
+ if (channel == -1) {
+ for (chan = 0; chan < 8; chan++) {
+ (*fpPrint)
+ ("--------------------------------------------------\n");
+ (*fpPrint)
+ ("Module %d: Channel %d Source 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Destination 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d LLP 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_LLP(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+ }
+ } else {
+ chan = channel;
+ (*fpPrint)
+ ("--------------------------------------------------\n");
+ (*fpPrint)
+ ("Module %d: Channel %d Source 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Destination 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d LLP 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Helper function to display descriptor ring
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static void DisplayDescRing(void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ dmacHw_DESC_t *pStart;
+
+ if (pRing->pHead == NULL) {
+ return;
+ }
+
+ pStart = pRing->pHead;
+
+ while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
+ if (pStart == pRing->pHead) {
+ (*fpPrint) ("Head\n");
+ }
+ if (pStart == pRing->pTail) {
+ (*fpPrint) ("Tail\n");
+ }
+ if (pStart == pRing->pProg) {
+ (*fpPrint) ("Prog\n");
+ }
+ if (pStart == pRing->pEnd) {
+ (*fpPrint) ("End\n");
+ }
+ if (pStart == pRing->pFree) {
+ (*fpPrint) ("Free\n");
+ }
+ (*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+ (*fpPrint) ("sar 0x%0X\n", pStart->sar);
+ (*fpPrint) ("dar 0x%0X\n", pStart->dar);
+ (*fpPrint) ("llp 0x%0X\n", pStart->llp);
+ (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+ (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+ (*fpPrint) ("sstat 0x%0X\n", pStart->sstat);
+ (*fpPrint) ("dstat 0x%0X\n", pStart->dstat);
+ (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+
+ pStart = (dmacHw_DESC_t *) pStart->llp;
+ }
+ if (pStart == pRing->pHead) {
+ (*fpPrint) ("Head\n");
+ }
+ if (pStart == pRing->pTail) {
+ (*fpPrint) ("Tail\n");
+ }
+ if (pStart == pRing->pProg) {
+ (*fpPrint) ("Prog\n");
+ }
+ if (pStart == pRing->pEnd) {
+ (*fpPrint) ("End\n");
+ }
+ if (pStart == pRing->pFree) {
+ (*fpPrint) ("Free\n");
+ }
+ (*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+ (*fpPrint) ("sar 0x%0X\n", pStart->sar);
+ (*fpPrint) ("dar 0x%0X\n", pStart->dar);
+ (*fpPrint) ("llp 0x%0X\n", pStart->llp);
+ (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+ (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+ (*fpPrint) ("sstat 0x%0X\n", pStart->sstat);
+ (*fpPrint) ("dstat 0x%0X\n", pStart->dstat);
+ (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+}
+
+/****************************************************************************/
+/**
+* @brief Check if DMA channel is the flow controller
+*
+* @return 1 : If DMA is a flow controler
+* 0 : Peripheral is the flow controller
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline int DmaIsFlowController(void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ uint32_t ttfc =
+ (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
+ lo & dmacHw_REG_CTL_TTFC_MASK;
+
+ switch (ttfc) {
+ case dmacHw_REG_CTL_TTFC_MM_DMAC:
+ case dmacHw_REG_CTL_TTFC_MP_DMAC:
+ case dmacHw_REG_CTL_TTFC_PM_DMAC:
+ case dmacHw_REG_CTL_TTFC_PP_DMAC:
+ return 1;
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Overwrites data length in the descriptor
+*
+* This function overwrites data length in the descriptor
+*
+*
+* @return void
+*
+* @note
+* This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ ) {
+ dmacHw_DESC_t *pProg;
+ dmacHw_DESC_t *pHead;
+ int srcTs = 0;
+ int srcTrSize = 0;
+
+ pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
+ pProg = pHead;
+
+ srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+ srcTs = dataLen / srcTrSize;
+ do {
+ pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+ pProg = (dmacHw_DESC_t *) pProg->llp;
+ } while (pProg != pHead);
+}
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the DMA channel specific interrupt
+*
+*
+* @return void
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+* @brief Returns the cause of channel specific DMA interrupt
+*
+* This function returns the cause of interrupt
+*
+* @return Interrupt status, each bit representing a specific type of interrupt
+*
+* @note
+* Should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
+
+ if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_TRANS;
+ }
+ if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_BLOCK;
+ }
+ if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_ERROR;
+ }
+
+ return status;
+}
+
+/****************************************************************************/
+/**
+* @brief Indentifies a DMA channel causing interrupt
+*
+* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+* @return NULL : No channel causing DMA interrupt
+* ! NULL : Handle to a channel causing DMA interrupt
+* @note
+* dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
+{
+ uint32_t i;
+
+ for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
+ if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ ) {
+ return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
+ }
+ }
+ return dmacHw_CBLK_TO_HANDLE(NULL);
+}
+
+/****************************************************************************/
+/**
+* @brief Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+* @return On failure : -1
+* On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ ) {
+ int srcTs = 0;
+ int oddSize = 0;
+ int descCount = 0;
+ int dstTrSize = 0;
+ int srcTrSize = 0;
+ uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+ dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+ dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+
+ dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+ /* Skip Tx if buffer is NULL or length is unknown */
+ if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+ /* Do not initiate transfer */
+ return -1;
+ }
+
+ /* Ensure scatter and gather are transaction aligned */
+ if (pConfig->srcGatherWidth % srcTrSize
+ || pConfig->dstScatterWidth % dstTrSize) {
+ return -1;
+ }
+
+ /*
+ Background 1: DMAC can not perform DMA if source and destination addresses are
+ not properly aligned with the channel's transaction width. So, for successful
+ DMA transfer, transaction width must be set according to the alignment of the
+ source and destination address.
+ */
+
+ /* Adjust destination transaction width if destination address is not aligned properly */
+ dstTrWidth = pConfig->dstMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+ dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+ dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+ }
+
+ /* Adjust source transaction width if source address is not aligned properly */
+ srcTrWidth = pConfig->srcMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+ srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+ }
+
+ /* Find the maximum transaction per descriptor */
+ if (pConfig->maxDataPerBlock
+ && ((pConfig->maxDataPerBlock / srcTrSize) <
+ dmacHw_MAX_BLOCKSIZE)) {
+ maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+ }
+
+ /* Find number of source transactions needed to complete the DMA transfer */
+ srcTs = dataLen / srcTrSize;
+ /* Find the odd number of bytes that need to be transferred as single byte transaction width */
+ if (srcTs && (dstTrSize > srcTrSize)) {
+ oddSize = dataLen % dstTrSize;
+ /* Adjust source transaction count due to "oddSize" */
+ srcTs = srcTs - (oddSize / srcTrSize);
+ } else {
+ oddSize = dataLen % srcTrSize;
+ }
+ /* Adjust "descCount" due to "oddSize" */
+ if (oddSize) {
+ descCount++;
+ }
+
+ /* Find the number of descriptor needed for total "srcTs" */
+ if (srcTs) {
+ descCount += ((srcTs - 1) / maxBlockSize) + 1;
+ }
+
+ return descCount;
+}
+
+/****************************************************************************/
+/**
+* @brief Check the existance of pending descriptor
+*
+* This function confirmes if there is any pending descriptor in the chain
+* to program the channel
+*
+* @return 1 : Channel need to be programmed with pending descriptor
+* 0 : No more pending descriptor to programe the channel
+*
+* @note
+* - This function should be called from ISR in case there are pending
+* descriptor to program the channel.
+*
+* Example:
+*
+* dmac_isr ()
+* {
+* ...
+* if (dmacHw_descriptorPending (handle))
+* {
+* dmacHw_initiateTransfer (handle);
+* }
+* }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ /* Make sure channel is not busy */
+ if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+ /* Check if pEnd is not processed */
+ if (pRing->pEnd) {
+ /* Something left for processing */
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Program channel register to stop transfer
+*
+* Ensures the channel is not doing any transfer after calling this function
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk;
+
+ pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ /* Stop the channel */
+ dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+* @brief Deallocates source or destination memory, allocated
+*
+* This function can be called to deallocate data memory that was DMAed successfully
+*
+* @return On failure : -1
+* On success : Number of buffer freed
+*
+* @note
+* This function will be called ONLY, when source OR destination address is pointing
+* to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ uint32_t count = 0;
+
+ if (fpFree == NULL) {
+ return -1;
+ }
+
+ while ((pRing->pFree != pRing->pTail)
+ && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
+ if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
+ /* Identify, which memory to free */
+ if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+ (*fpFree) ((void *)pRing->pFree->dar);
+ } else {
+ /* Destination was a peripheral */
+ (*fpFree) ((void *)pRing->pFree->sar);
+ }
+ /* Unmark user memory to indicate it is freed */
+ pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
+ }
+ dmacHw_NEXT_DESC(pRing, pFree);
+
+ count++;
+ }
+
+ return count;
+}
+
+/****************************************************************************/
+/**
+* @brief Prepares descriptor ring, when source peripheral working as a flow controller
+*
+* This function will update the discriptor ring by allocating buffers, when source peripheral
+* has to work as a flow controller to transfer data from:
+* - Peripheral to memory.
+*
+* @return On failure : -1
+* On success : Number of descriptor updated
+*
+*
+* @note
+* Channel must be configured for peripheral to memory transfer
+*
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t srcAddr, /* [ IN ] Source peripheral address */
+ void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */
+ int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+ int num /* [ IN ] Number of descriptor to set */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_DESC_t *pProg = NULL;
+ dmacHw_DESC_t *pLast = NULL;
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ uint32_t dstAddr;
+ uint32_t controlParam;
+ int i;
+
+ dmacHw_ASSERT(pConfig->transferType ==
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
+
+ if (num > pRing->num) {
+ return -1;
+ }
+
+ pLast = pRing->pEnd; /* Last descriptor updated */
+ pProg = pRing->pHead; /* First descriptor in the new list */
+
+ controlParam = pConfig->srcUpdate |
+ pConfig->dstUpdate |
+ pConfig->srcMaxTransactionWidth |
+ pConfig->dstMaxTransactionWidth |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface |
+ pConfig->srcMaxBurstWidth |
+ pConfig->dstMaxBurstWidth |
+ dmacHw_REG_CTL_TTFC_PM_PERI |
+ dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
+
+ for (i = 0; i < num; i++) {
+ /* Allocate Rx buffer only for idle descriptor */
+ if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+ ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
+ ) {
+ /* Rx descriptor is not idle */
+ break;
+ }
+ /* Set source address */
+ pRing->pHead->sar = srcAddr;
+ if (fpAlloc) {
+ /* Allocate memory for buffer in descriptor */
+ dstAddr = (uint32_t) (*fpAlloc) (len);
+ /* Check the destination address */
+ if (dstAddr == 0) {
+ if (i == 0) {
+ /* Not a single descriptor is available */
+ return -1;
+ }
+ break;
+ }
+ /* Set destination address */
+ pRing->pHead->dar = dstAddr;
+ }
+ /* Set control information */
+ pRing->pHead->ctl.lo = controlParam;
+ /* Use "devCtl" to mark the memory that need to be freed later */
+ pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
+ /* Descriptor is now owned by the channel */
+ pRing->pHead->ctl.hi = 0;
+ /* Remember the descriptor last updated */
+ pRing->pEnd = pRing->pHead;
+ /* Update next descriptor */
+ dmacHw_NEXT_DESC(pRing, pHead);
+ }
+
+ /* Mark the end of the list */
+ pRing->pEnd->ctl.lo &=
+ ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
+ /* Connect the list */
+ if (pLast != pProg) {
+ pLast->ctl.lo |=
+ dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
+ }
+ /* Mark the descriptors are updated */
+ pCblk->descUpdated = 1;
+ if (!pCblk->varDataStarted) {
+ /* LLP must be pointing to the first descriptor */
+ dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+ (uint32_t) pProg - pRing->virt2PhyOffset);
+ /* Channel, handling variable data started */
+ pCblk->varDataStarted = 1;
+ }
+
+ return i;
+}
+
+/****************************************************************************/
+/**
+* @brief Read data DMAed to memory
+*
+* This function will read data that has been DMAed to memory while transfering from:
+* - Memory to memory
+* - Peripheral to memory
+*
+* @param handle -
+* @param ppBbuf -
+* @param pLen -
+*
+* @return 0 - No more data is available to read
+* 1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void **ppBbuf, /* [ OUT ] Data received */
+ size_t *pLlen /* [ OUT ] Length of the data received */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ (void)handle;
+
+ if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
+ if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+ (pRing->pTail == pRing->pHead)
+ ) {
+ /* No receive data available */
+ *ppBbuf = (char *)NULL;
+ *pLlen = 0;
+
+ return 0;
+ }
+ }
+
+ /* Return read buffer and length */
+ *ppBbuf = (char *)pRing->pTail->dar;
+
+ /* Extract length of the received data */
+ if (DmaIsFlowController(pDescriptor)) {
+ uint32_t srcTrSize = 0;
+
+ switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
+ srcTrSize = 1;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
+ srcTrSize = 2;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
+ srcTrSize = 4;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
+ srcTrSize = 8;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ /* Calculate length from the block size */
+ *pLlen =
+ (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
+ srcTrSize;
+ } else {
+ /* Extract length from the source peripheral */
+ *pLlen = pRing->pTail->sstat;
+ }
+
+ /* Advance tail to next descriptor */
+ dmacHw_NEXT_DESC(pRing, pTail);
+
+ return 1;
+}
+
+/****************************************************************************/
+/**
+* @brief Set descriptor carrying control information
+*
+* This function will be used to send specific control information to the device
+* using the DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t ctlAddress, /* [ IN ] Address of the device control register */
+ uint32_t control /* [ IN ] Device control information */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ if (ctlAddress == 0) {
+ return -1;
+ }
+
+ /* Check the availability of descriptors in the ring */
+ if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
+ return -1;
+ }
+ /* Set control information */
+ pRing->pHead->devCtl = control;
+ /* Set source and destination address */
+ pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
+ pRing->pHead->dar = ctlAddress;
+ /* Set control parameters */
+ if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+ pRing->pHead->ctl.lo = pConfig->transferType |
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_SRC_TRANSACTION_WIDTH_32 |
+ pConfig->dstMaxTransactionWidth |
+ dmacHw_SRC_BURST_WIDTH_0 |
+ dmacHw_DST_BURST_WIDTH_0 |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+ } else {
+ uint32_t transferType = 0;
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ pRing->pHead->ctl.lo = transferType |
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_SRC_TRANSACTION_WIDTH_32 |
+ pConfig->dstMaxTransactionWidth |
+ dmacHw_SRC_BURST_WIDTH_0 |
+ dmacHw_DST_BURST_WIDTH_0 |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface |
+ pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
+ }
+
+ /* Set block transaction size to one 32 bit transaction */
+ pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
+
+ /* Remember the descriptor to initialize the registers */
+ if (pRing->pProg == dmacHw_DESC_INIT) {
+ pRing->pProg = pRing->pHead;
+ }
+ pRing->pEnd = pRing->pHead;
+
+ /* Advance the descriptor */
+ dmacHw_NEXT_DESC(pRing, pHead);
+
+ /* Update Tail pointer if destination is a peripheral */
+ if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+ pRing->pTail = pRing->pHead;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Sets channel specific user data
+*
+* This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *userData /* [ IN ] User data */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ pCblk->userData = userData;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets channel specific user data
+*
+* This function returns user data specific to a DMA channel
+*
+* @return user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ return pCblk->userData;
+}
+
+/****************************************************************************/
+/**
+* @brief Resets descriptor control information
+*
+* @return void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ int i;
+ dmacHw_DESC_RING_t *pRing;
+ dmacHw_DESC_t *pDesc;
+
+ pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ pDesc = pRing->pHead;
+
+ for (i = 0; i < pRing->num; i++) {
+ /* Mark descriptor is ready to use */
+ pDesc->ctl.hi = dmacHw_DESC_FREE;
+ /* Look into next link list item */
+ pDesc++;
+ }
+ pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+ pRing->pProg = dmacHw_DESC_INIT;
+}
+
+/****************************************************************************/
+/**
+* @brief Displays channel specific registers and other control parameters
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
+ DisplayDescRing(pDescriptor, fpPrint);
+}
diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile
new file mode 100644
index 00000000000..244a61ab769
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/Makefile
@@ -0,0 +1 @@
+obj-y += tmrHw.o
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
new file mode 100644
index 00000000000..5c1c9a0e5ed
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -0,0 +1,576 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file tmrHw.c
+*
+* @brief Low level Timer driver routines
+*
+* @note
+*
+* These routines provide basic timer functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+
+#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define tmrHw_ASSERT(a) if (!(a)) *(char *)0 = 0
+#define tmrHw_MILLISEC_PER_SEC (1000)
+
+#define tmrHw_LOW_1_RESOLUTION_COUNT (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_LOW_1_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
+#define tmrHw_LOW_16_RESOLUTION_COUNT (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
+#define tmrHw_LOW_16_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
+#define tmrHw_LOW_256_RESOLUTION_COUNT (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
+#define tmrHw_LOW_256_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
+
+#define tmrHw_HIGH_1_RESOLUTION_COUNT (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_HIGH_1_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
+#define tmrHw_HIGH_16_RESOLUTION_COUNT (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
+#define tmrHw_HIGH_16_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
+#define tmrHw_HIGH_256_RESOLUTION_COUNT (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
+#define tmrHw_HIGH_256_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
+
+static void ResetTimer(tmrHw_ID_t timerId)
+ __attribute__ ((section(".aramtext")));
+static int tmrHw_divide(int num, int denom)
+ __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Get timer capability
+*
+* This function returns various capabilities/attributes of a timer
+*
+* @return Capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */
+) {
+ switch (capability) {
+ case tmrHw_CAPABILITY_CLOCK:
+ return (timerId <=
+ 1) ? tmrHw_LOW_RESOLUTION_CLOCK :
+ tmrHw_HIGH_RESOLUTION_CLOCK;
+ case tmrHw_CAPABILITY_RESOLUTION:
+ return 32;
+ default:
+ return 0;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Resets a timer
+*
+* This function initializes timer
+*
+* @return void
+*
+*/
+/****************************************************************************/
+static void ResetTimer(tmrHw_ID_t timerId /* [ IN ] Timer Id */
+) {
+ /* Reset timer */
+ pTmrHw[timerId].LoadValue = 0;
+ pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
+ pTmrHw[timerId].Control = 0;
+ pTmrHw[timerId].BackgroundLoad = 0;
+ /* Always configure as a 32 bit timer */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
+ /* Clear interrupt only if raw status interrupt is set */
+ if (pTmrHw[timerId].RawInterruptStatus) {
+ pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Sets counter value for an interval in ms
+*
+* @return On success: Effective counter value set
+* On failure: 0
+*
+*/
+/****************************************************************************/
+static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */
+) {
+ uint32_t scale = 0;
+ uint32_t count = 0;
+
+ if (timerId == 0 || timerId == 1) {
+ if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+ scale = tmrHw_LOW_1_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+ scale = tmrHw_LOW_16_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+ scale = tmrHw_LOW_256_RESOLUTION_COUNT;
+ } else {
+ return 0;
+ }
+
+ count = msec * scale;
+ /* Set counter value */
+ pTmrHw[timerId].LoadValue = count;
+ pTmrHw[timerId].BackgroundLoad = count;
+
+ } else if (timerId == 2 || timerId == 3) {
+ if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+ scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+ scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+ scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
+ } else {
+ return 0;
+ }
+
+ count = msec * scale;
+ /* Set counter value */
+ pTmrHw[timerId].LoadValue = count;
+ pTmrHw[timerId].BackgroundLoad = count;
+ }
+ return count / scale;
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer in terms of timer interrupt rate
+*
+* This function initializes a periodic timer to generate specific number of
+* timer interrupt per second
+*
+* @return On success: Effective timer frequency
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */
+) {
+ uint32_t resolution = 0;
+ uint32_t count = 0;
+ ResetTimer(timerId);
+
+ /* Set timer mode periodic */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+ /* Set timer in highest resolution */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+
+ if (rate && (timerId == 0 || timerId == 1)) {
+ if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
+ return 0;
+ }
+ resolution = tmrHw_LOW_RESOLUTION_CLOCK;
+ } else if (rate && (timerId == 2 || timerId == 3)) {
+ if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
+ return 0;
+ } else {
+ resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
+ }
+ } else {
+ return 0;
+ }
+ /* Find the counter value */
+ count = resolution / rate;
+ /* Set counter value */
+ pTmrHw[timerId].LoadValue = count;
+ pTmrHw[timerId].BackgroundLoad = count;
+
+ return resolution / count;
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt after
+* certain time interval
+*
+* This function initializes a periodic timer to generate timer interrupt
+* after every time interval in millisecond
+*
+* @return On success: Effective interval set in milli-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */
+) {
+ ResetTimer(timerId);
+
+ /* Set timer mode periodic */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+ return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt just once
+* after certain time interval
+*
+* This function initializes a periodic timer to generate a single ticks after
+* certain time interval in millisecond
+*
+* @return On success: Effective interval set in milli-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */
+) {
+ ResetTimer(timerId);
+
+ /* Set timer mode oneshot */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
+
+ return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a timer to run as a free running timer
+*
+* This function initializes a timer to run as a free running timer
+*
+* @return Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ uint32_t divider /* [ IN ] Dividing the clock frequency */
+) {
+ uint32_t scale = 0;
+
+ ResetTimer(timerId);
+ /* Set timer as free running mode */
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+ if (divider >= 64) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+ scale = 256;
+ } else if (divider >= 8) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+ scale = 16;
+ } else {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+ scale = 1;
+ }
+
+ if (timerId == 0 || timerId == 1) {
+ return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
+ } else if (timerId == 2 || timerId == 3) {
+ return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Starts a timer
+*
+* This function starts a preconfigured timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Stops a timer
+*
+* This function stops a running timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets current timer count
+*
+* This function returns the current timer value
+*
+* @return Current downcounting timer value
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ /* return 32 bit timer value */
+ switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
+ case tmrHw_CONTROL_FREE_RUNNING:
+ if (pTmrHw[timerId].CurrentValue) {
+ return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
+ }
+ break;
+ case tmrHw_CONTROL_PERIODIC:
+ case tmrHw_CONTROL_ONESHOT:
+ return pTmrHw[timerId].BackgroundLoad -
+ pTmrHw[timerId].CurrentValue;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets timer count rate
+*
+* This function returns the number of counts per second
+*
+* @return Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ uint32_t divider = 0;
+
+ switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
+ case tmrHw_CONTROL_PRESCALE_1:
+ divider = 1;
+ break;
+ case tmrHw_CONTROL_PRESCALE_16:
+ divider = 16;
+ break;
+ case tmrHw_CONTROL_PRESCALE_256:
+ divider = 256;
+ break;
+ default:
+ tmrHw_ASSERT(0);
+ }
+
+ if (timerId == 0 || timerId == 1) {
+ return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
+ } else {
+ return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables timer interrupt
+*
+* This function enables the timer interrupt
+*
+* @return N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disables timer interrupt
+*
+* This function disable the timer interrupt
+*
+* @return N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the timer interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].InterruptClear = 0x1;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets the interrupt status
+*
+* This function returns timer interrupt status
+*
+* @return Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ if (pTmrHw[timerId].InterruptStatus) {
+ return tmrHw_INTERRUPT_STATUS_SET;
+ } else {
+ return tmrHw_INTERRUPT_STATUS_UNSET;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Indentifies a timer causing interrupt
+*
+* This functions returns a timer causing interrupt
+*
+* @return 0xFFFFFFFF : No timer causing an interrupt
+* ! 0xFFFFFFFF : timer causing an interrupt
+* @note
+* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void /* void */
+) {
+ int i;
+
+ for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
+ if (pTmrHw[i].InterruptStatus) {
+ return i;
+ }
+ }
+
+ return 0xFFFFFFFF;
+}
+
+/****************************************************************************/
+/**
+* @brief Displays specific timer registers
+*
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+) {
+ (*fpPrint) ("Displaying register contents \n\n");
+ (*fpPrint) ("Timer %d: Load value 0x%X\n", timerId,
+ pTmrHw[timerId].LoadValue);
+ (*fpPrint) ("Timer %d: Background load value 0x%X\n", timerId,
+ pTmrHw[timerId].BackgroundLoad);
+ (*fpPrint) ("Timer %d: Control 0x%X\n", timerId,
+ pTmrHw[timerId].Control);
+ (*fpPrint) ("Timer %d: Interrupt clear 0x%X\n", timerId,
+ pTmrHw[timerId].InterruptClear);
+ (*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
+ pTmrHw[timerId].RawInterruptStatus);
+ (*fpPrint) ("Timer %d: Interrupt status 0x%X\n", timerId,
+ pTmrHw[timerId].InterruptStatus);
+}
+
+/****************************************************************************/
+/**
+* @brief Use a timer to perform a busy wait delay for a number of usecs.
+*
+* @return N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ unsigned long usecs /* [ IN ] usec to delay */
+) {
+ tmrHw_RATE_t usec_tick_rate;
+ tmrHw_COUNT_t start_time;
+ tmrHw_COUNT_t delta_time;
+
+ start_time = tmrHw_GetCurrentCount(timerId);
+ usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
+ delta_time = usecs * usec_tick_rate;
+
+ /* Busy wait */
+ while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
+ ;
+}
+
+/****************************************************************************/
+/**
+* @brief Local Divide function
+*
+* This function does the divide
+*
+* @return divide value
+*
+*/
+/****************************************************************************/
+static int tmrHw_divide(int num, int denom)
+{
+ int r;
+ int t = 1;
+
+ /* Shift denom and t up to the largest value to optimize algorithm */
+ /* t contains the units of each divide */
+ while ((denom & 0x40000000) == 0) { /* fails if denom=0 */
+ denom = denom << 1;
+ t = t << 1;
+ }
+
+ /* Intialize the result */
+ r = 0;
+
+ do {
+ /* Determine if there exists a positive remainder */
+ if ((num - denom) >= 0) {
+ /* Accumlate t to the result and calculate a new remainder */
+ num = num - denom;
+ r = r + t;
+ }
+ /* Continue to shift denom and shift t down to 0 */
+ denom = denom >> 1;
+ t = t >> 1;
+ } while (t != 0);
+ return r;
+}
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
new file mode 100644
index 00000000000..7b20fccb9d4
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma.c
@@ -0,0 +1,2321 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dma.c
+*
+* @brief Implements the DMA interface.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/proc_fs.h>
+
+#include <mach/timer.h>
+
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <asm/atomic.h>
+#include <mach/dma.h>
+
+/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
+/* especially since dc4 doesn't use kmalloc'd memory. */
+
+#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
+
+/* ---- Public Variables ------------------------------------------------- */
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#define MAKE_HANDLE(controllerIdx, channelIdx) (((controllerIdx) << 4) | (channelIdx))
+
+#define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f)
+#define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f)
+
+#define DMA_MAP_DEBUG 0
+
+#if DMA_MAP_DEBUG
+# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args)
+#else
+# define DMA_MAP_PRINT(fmt, args...)
+#endif
+
+/* ---- Private Variables ------------------------------------------------ */
+
+static DMA_Global_t gDMA;
+static struct proc_dir_entry *gDmaDir;
+
+static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
+
+#include "dma_device.c"
+
+/* ---- Private Function Prototypes -------------------------------------- */
+
+/* ---- Functions ------------------------------------------------------- */
+
+/****************************************************************************/
+/**
+* Displays information for /proc/dma/mem-type
+*/
+/****************************************************************************/
+
+static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int len = 0;
+
+ len += sprintf(buf + len, "dma_map_mem statistics\n");
+ len +=
+ sprintf(buf + len, "coherent: %d\n",
+ atomic_read(&gDmaStatMemTypeCoherent));
+ len +=
+ sprintf(buf + len, "kmalloc: %d\n",
+ atomic_read(&gDmaStatMemTypeKmalloc));
+ len +=
+ sprintf(buf + len, "vmalloc: %d\n",
+ atomic_read(&gDmaStatMemTypeVmalloc));
+ len +=
+ sprintf(buf + len, "user: %d\n",
+ atomic_read(&gDmaStatMemTypeUser));
+
+ return len;
+}
+
+/****************************************************************************/
+/**
+* Displays information for /proc/dma/channels
+*/
+/****************************************************************************/
+
+static int dma_proc_read_channels(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int controllerIdx;
+ int channelIdx;
+ int limit = count - 200;
+ int len = 0;
+ DMA_Channel_t *channel;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+ controllerIdx++) {
+ for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ if (len >= limit) {
+ break;
+ }
+
+ channel =
+ &gDMA.controller[controllerIdx].channel[channelIdx];
+
+ len +=
+ sprintf(buf + len, "%d:%d ", controllerIdx,
+ channelIdx);
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+ 0) {
+ len +=
+ sprintf(buf + len, "Dedicated for %s ",
+ DMA_gDeviceAttribute[channel->
+ devType].name);
+ } else {
+ len += sprintf(buf + len, "Shared ");
+ }
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
+ len += sprintf(buf + len, "No ISR ");
+ }
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
+ len += sprintf(buf + len, "Fifo: 128 ");
+ } else {
+ len += sprintf(buf + len, "Fifo: 64 ");
+ }
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+ len +=
+ sprintf(buf + len, "InUse by %s",
+ DMA_gDeviceAttribute[channel->
+ devType].name);
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ len +=
+ sprintf(buf + len, " (%s:%d)",
+ channel->fileName,
+ channel->lineNum);
+#endif
+ } else {
+ len += sprintf(buf + len, "Avail ");
+ }
+
+ if (channel->lastDevType != DMA_DEVICE_NONE) {
+ len +=
+ sprintf(buf + len, "Last use: %s ",
+ DMA_gDeviceAttribute[channel->
+ lastDevType].
+ name);
+ }
+
+ len += sprintf(buf + len, "\n");
+ }
+ }
+ up(&gDMA.lock);
+ *eof = 1;
+
+ return len;
+}
+
+/****************************************************************************/
+/**
+* Displays information for /proc/dma/devices
+*/
+/****************************************************************************/
+
+static int dma_proc_read_devices(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int limit = count - 200;
+ int len = 0;
+ int devIdx;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+ DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+ if (devAttr->name == NULL) {
+ continue;
+ }
+
+ if (len >= limit) {
+ break;
+ }
+
+ len += sprintf(buf + len, "%-12s ", devAttr->name);
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+ len +=
+ sprintf(buf + len, "Dedicated %d:%d ",
+ devAttr->dedicatedController,
+ devAttr->dedicatedChannel);
+ } else {
+ len += sprintf(buf + len, "Shared DMA:");
+ if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
+ len += sprintf(buf + len, "0");
+ }
+ if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
+ len += sprintf(buf + len, "1");
+ }
+ len += sprintf(buf + len, " ");
+ }
+ if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
+ len += sprintf(buf + len, "NoISR ");
+ }
+ if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
+ len += sprintf(buf + len, "Allow-128 ");
+ }
+
+ len +=
+ sprintf(buf + len,
+ "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
+ devAttr->numTransfers, devAttr->transferTicks,
+ devAttr->transferBytes,
+ devAttr->ring.bytesAllocated);
+
+ }
+
+ up(&gDMA.lock);
+ *eof = 1;
+
+ return len;
+}
+
+/****************************************************************************/
+/**
+* Determines if a DMA_Device_t is "valid".
+*
+* @return
+* TRUE - dma device is valid
+* FALSE - dma device isn't valid
+*/
+/****************************************************************************/
+
+static inline int IsDeviceValid(DMA_Device_t device)
+{
+ return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
+}
+
+/****************************************************************************/
+/**
+* Translates a DMA handle into a pointer to a channel.
+*
+* @return
+* non-NULL - pointer to DMA_Channel_t
+* NULL - DMA Handle was invalid
+*/
+/****************************************************************************/
+
+static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
+{
+ int controllerIdx;
+ int channelIdx;
+
+ controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+ channelIdx = CHANNEL_FROM_HANDLE(handle);
+
+ if ((controllerIdx > DMA_NUM_CONTROLLERS)
+ || (channelIdx > DMA_NUM_CHANNELS)) {
+ return NULL;
+ }
+ return &gDMA.controller[controllerIdx].channel[channelIdx];
+}
+
+/****************************************************************************/
+/**
+* Interrupt handler which is called to process DMA interrupts.
+*/
+/****************************************************************************/
+
+static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
+{
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int irqStatus;
+
+ channel = (DMA_Channel_t *) dev_id;
+
+ /* Figure out why we were called, and knock down the interrupt */
+
+ irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
+ dmacHw_clearInterrupt(channel->dmacHwHandle);
+
+ if ((channel->devType < 0)
+ || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
+ printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
+ channel->devType);
+ return IRQ_NONE;
+ }
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ /* Update stats */
+
+ if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
+ devAttr->transferTicks +=
+ (timer_get_tick_count() - devAttr->transferStartTime);
+ }
+
+ if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
+ printk(KERN_ERR
+ "dma_interrupt_handler: devType :%d DMA error (%s)\n",
+ channel->devType, devAttr->name);
+ } else {
+ devAttr->numTransfers++;
+ devAttr->transferBytes += devAttr->numBytes;
+ }
+
+ /* Call any installed handler */
+
+ if (devAttr->devHandler != NULL) {
+ devAttr->devHandler(channel->devType, irqStatus,
+ devAttr->userData);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/****************************************************************************/
+/**
+* Allocates memory to hold a descriptor ring. The descriptor ring then
+* needs to be populated by making one or more calls to
+* dna_add_descriptors.
+*
+* The returned descriptor ring will be automatically initialized.
+*
+* @return
+* 0 Descriptor ring was allocated successfully
+* -EINVAL Invalid parameters passed in
+* -ENOMEM Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to populate */
+ int numDescriptors /* Number of descriptors that need to be allocated. */
+ ) {
+ size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
+
+ if ((ring == NULL) || (numDescriptors <= 0)) {
+ return -EINVAL;
+ }
+
+ ring->physAddr = 0;
+ ring->descriptorsAllocated = 0;
+ ring->bytesAllocated = 0;
+
+ ring->virtAddr = dma_alloc_writecombine(NULL,
+ bytesToAlloc,
+ &ring->physAddr,
+ GFP_KERNEL);
+ if (ring->virtAddr == NULL) {
+ return -ENOMEM;
+ }
+
+ ring->bytesAllocated = bytesToAlloc;
+ ring->descriptorsAllocated = numDescriptors;
+
+ return dma_init_descriptor_ring(ring, numDescriptors);
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring /* Descriptor to release */
+ ) {
+ if (ring->virtAddr != NULL) {
+ dma_free_writecombine(NULL,
+ ring->bytesAllocated,
+ ring->virtAddr, ring->physAddr);
+ }
+
+ ring->bytesAllocated = 0;
+ ring->descriptorsAllocated = 0;
+ ring->virtAddr = NULL;
+ ring->physAddr = 0;
+}
+
+EXPORT_SYMBOL(dma_free_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Initializes a descriptor ring, so that descriptors can be added to it.
+* Once a descriptor ring has been allocated, it may be reinitialized for
+* use with additional/different regions of memory.
+*
+* Note that if 7 descriptors are allocated, it's perfectly acceptable to
+* initialize the ring with a smaller number of descriptors. The amount
+* of memory allocated for the descriptor ring will not be reduced, and
+* the descriptor ring may be reinitialized later
+*
+* @return
+* 0 Descriptor ring was initialized successfully
+* -ENOMEM The descriptor which was passed in has insufficient space
+* to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to initialize */
+ int numDescriptors /* Number of descriptors to initialize. */
+ ) {
+ if (ring->virtAddr == NULL) {
+ return -EINVAL;
+ }
+ if (dmacHw_initDescriptor(ring->virtAddr,
+ ring->physAddr,
+ ring->bytesAllocated, numDescriptors) < 0) {
+ printk(KERN_ERR
+ "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_init_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Determines the number of descriptors which would be required for a
+* transfer of the indicated memory region.
+*
+* This function also needs to know which DMA device this transfer will
+* be destined for, so that the appropriate DMA configuration can be retrieved.
+* DMA parameters such as transfer width, and whether this is a memory-to-memory
+* or memory-to-peripheral, etc can all affect the actual number of descriptors
+* required.
+*
+* @return
+* > 0 Returns the number of descriptors required for the indicated transfer
+* -ENODEV - Device handed in is invalid.
+* -EINVAL Invalid parameters
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ int numDescriptors;
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+ (void *)srcData,
+ (void *)dstData,
+ numBytes);
+ if (numDescriptors < 0) {
+ printk(KERN_ERR
+ "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
+ return -EINVAL;
+ }
+
+ return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_calculate_descriptor_count);
+
+/****************************************************************************/
+/**
+* Adds a region of memory to the descriptor ring. Note that it may take
+* multiple descriptors for each region of memory. It is the callers
+* responsibility to allocate a sufficiently large descriptor ring.
+*
+* @return
+* 0 Descriptors were added successfully
+* -ENODEV Device handed in is invalid.
+* -EINVAL Invalid parameters
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring, /* Descriptor ring to add descriptors to */
+ DMA_Device_t device, /* DMA Device that descriptors are for */
+ dma_addr_t srcData, /* Place to get data (memory or device) */
+ dma_addr_t dstData, /* Place to put data (memory or device) */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ int rc;
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ rc = dmacHw_setDataDescriptor(&devAttr->config,
+ ring->virtAddr,
+ (void *)srcData,
+ (void *)dstData, numBytes);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
+ rc);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_add_descriptors);
+
+/****************************************************************************/
+/**
+* Sets the descriptor ring associated with a device.
+*
+* Once set, the descriptor ring will be associated with the device, even
+* across channel request/free calls. Passing in a NULL descriptor ring
+* will release any descriptor ring currently associated with the device.
+*
+* Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+* the descriptor ring may be released and reallocated.
+*
+* Note: This function will release the descriptor memory for any current
+* descriptor ring associated with this device.
+*
+* @return
+* 0 Descriptors were added successfully
+* -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Descriptor ring to add descriptors to */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ /* Free the previously allocated descriptor ring */
+
+ dma_free_descriptor_ring(&devAttr->ring);
+
+ if (ring != NULL) {
+ /* Copy in the new one */
+
+ devAttr->ring = *ring;
+ }
+
+ /* Set things up so that if dma_transfer is called then this descriptor */
+ /* ring will get freed. */
+
+ devAttr->prevSrcData = 0;
+ devAttr->prevDstData = 0;
+ devAttr->prevNumBytes = 0;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Retrieves the descriptor ring associated with a device.
+*
+* @return
+* 0 Descriptors were added successfully
+* -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Place to store retrieved ring */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+
+ memset(ring, 0, sizeof(*ring));
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ *ring = devAttr->ring;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_get_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Configures a DMA channel.
+*
+* @return
+* >= 0 - Initialization was successfull.
+*
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+static int ConfigChannel(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int controllerIdx;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+ controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
+ if (devAttr->config.transferType ==
+ dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
+ devAttr->config.dstPeripheralPort =
+ devAttr->dmacPort[controllerIdx];
+ } else if (devAttr->config.transferType ==
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
+ devAttr->config.srcPeripheralPort =
+ devAttr->dmacPort[controllerIdx];
+ }
+ }
+
+ if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
+ printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* Intializes all of the data structures associated with the DMA.
+* @return
+* >= 0 - Initialization was successfull.
+*
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_init(void)
+{
+ int rc = 0;
+ int controllerIdx;
+ int channelIdx;
+ DMA_Device_t devIdx;
+ DMA_Channel_t *channel;
+ DMA_Handle_t dedicatedHandle;
+
+ memset(&gDMA, 0, sizeof(gDMA));
+
+ init_MUTEX_LOCKED(&gDMA.lock);
+ init_waitqueue_head(&gDMA.freeChannelQ);
+
+ /* Initialize the Hardware */
+
+ dmacHw_initDma();
+
+ /* Start off by marking all of the DMA channels as shared. */
+
+ for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+ controllerIdx++) {
+ for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ channel =
+ &gDMA.controller[controllerIdx].channel[channelIdx];
+
+ channel->flags = 0;
+ channel->devType = DMA_DEVICE_NONE;
+ channel->lastDevType = DMA_DEVICE_NONE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ channel->fileName = "";
+ channel->lineNum = 0;
+#endif
+
+ channel->dmacHwHandle =
+ dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
+ (controllerIdx,
+ channelIdx));
+ dmacHw_initChannel(channel->dmacHwHandle);
+ }
+ }
+
+ /* Record any special attributes that channels may have */
+
+ gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+ gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+ gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+ gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+
+ /* Now walk through and record the dedicated channels. */
+
+ for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+ DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+ if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
+ && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
+ printk(KERN_ERR
+ "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
+ devAttr->name);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+ /* This is a dedicated device. Mark the channel as being reserved. */
+
+ if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
+ printk(KERN_ERR
+ "DMA Device: %s DMA Controller %d is out of range\n",
+ devAttr->name,
+ devAttr->dedicatedController);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
+ printk(KERN_ERR
+ "DMA Device: %s DMA Channel %d is out of range\n",
+ devAttr->name,
+ devAttr->dedicatedChannel);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ dedicatedHandle =
+ MAKE_HANDLE(devAttr->dedicatedController,
+ devAttr->dedicatedChannel);
+ channel = HandleToChannel(dedicatedHandle);
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+ 0) {
+ printk
+ ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
+ devAttr->name,
+ devAttr->dedicatedController,
+ devAttr->dedicatedChannel,
+ DMA_gDeviceAttribute[channel->devType].
+ name);
+ rc = -EBUSY;
+ goto out;
+ }
+
+ channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
+ channel->devType = devIdx;
+
+ if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
+ channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
+ }
+
+ /* For dedicated channels, we can go ahead and configure the DMA channel now */
+ /* as well. */
+
+ ConfigChannel(dedicatedHandle);
+ }
+ }
+
+ /* Go through and register the interrupt handlers */
+
+ for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+ controllerIdx++) {
+ for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ channel =
+ &gDMA.controller[controllerIdx].channel[channelIdx];
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
+ snprintf(channel->name, sizeof(channel->name),
+ "dma %d:%d %s", controllerIdx,
+ channelIdx,
+ channel->devType ==
+ DMA_DEVICE_NONE ? "" :
+ DMA_gDeviceAttribute[channel->devType].
+ name);
+
+ rc =
+ request_irq(IRQ_DMA0C0 +
+ (controllerIdx *
+ DMA_NUM_CHANNELS) +
+ channelIdx,
+ dma_interrupt_handler,
+ IRQF_DISABLED, channel->name,
+ channel);
+ if (rc != 0) {
+ printk(KERN_ERR
+ "request_irq for IRQ_DMA%dC%d failed\n",
+ controllerIdx, channelIdx);
+ }
+ }
+ }
+ }
+
+ /* Create /proc/dma/channels and /proc/dma/devices */
+
+ gDmaDir = create_proc_entry("dma", S_IFDIR | S_IRUGO | S_IXUGO, NULL);
+
+ if (gDmaDir == NULL) {
+ printk(KERN_ERR "Unable to create /proc/dma\n");
+ } else {
+ create_proc_read_entry("channels", 0, gDmaDir,
+ dma_proc_read_channels, NULL);
+ create_proc_read_entry("devices", 0, gDmaDir,
+ dma_proc_read_devices, NULL);
+ create_proc_read_entry("mem-type", 0, gDmaDir,
+ dma_proc_read_mem_type, NULL);
+ }
+
+out:
+
+ up(&gDMA.lock);
+
+ return rc;
+}
+
+/****************************************************************************/
+/**
+* Reserves a channel for use with @a dev. If the device is setup to use
+* a shared channel, then this function will block until a free channel
+* becomes available.
+*
+* @return
+* >= 0 - A valid DMA Handle.
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg
+ (DMA_Device_t dev, const char *fileName, int lineNum)
+#else
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+#endif
+{
+ DMA_Handle_t handle;
+ DMA_DeviceAttribute_t *devAttr;
+ DMA_Channel_t *channel;
+ int controllerIdx;
+ int controllerIdx2;
+ int channelIdx;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
+ handle = -ENODEV;
+ goto out;
+ }
+ devAttr = &DMA_gDeviceAttribute[dev];
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ {
+ char *s;
+
+ s = strrchr(fileName, '/');
+ if (s != NULL) {
+ fileName = s + 1;
+ }
+ }
+#endif
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
+ /* This device has already been requested and not been freed */
+
+ printk(KERN_ERR "%s: device %s is already requested\n",
+ __func__, devAttr->name);
+ handle = -EBUSY;
+ goto out;
+ }
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+ /* This device has a dedicated channel. */
+
+ channel =
+ &gDMA.controller[devAttr->dedicatedController].
+ channel[devAttr->dedicatedChannel];
+ if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+ handle = -EBUSY;
+ goto out;
+ }
+
+ channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
+ devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ channel->fileName = fileName;
+ channel->lineNum = lineNum;
+#endif
+ handle =
+ MAKE_HANDLE(devAttr->dedicatedController,
+ devAttr->dedicatedChannel);
+ goto out;
+ }
+
+ /* This device needs to use one of the shared channels. */
+
+ handle = DMA_INVALID_HANDLE;
+ while (handle == DMA_INVALID_HANDLE) {
+ /* Scan through the shared channels and see if one is available */
+
+ for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
+ controllerIdx2++) {
+ /* Check to see if we should try on controller 1 first. */
+
+ controllerIdx = controllerIdx2;
+ if ((devAttr->
+ flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
+ controllerIdx = 1 - controllerIdx;
+ }
+
+ /* See if the device is available on the controller being tested */
+
+ if ((devAttr->
+ flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
+ != 0) {
+ for (channelIdx = 0;
+ channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ channel =
+ &gDMA.controller[controllerIdx].
+ channel[channelIdx];
+
+ if (((channel->
+ flags &
+ DMA_CHANNEL_FLAG_IS_DEDICATED) ==
+ 0)
+ &&
+ ((channel->
+ flags & DMA_CHANNEL_FLAG_IN_USE)
+ == 0)) {
+ if (((channel->
+ flags &
+ DMA_CHANNEL_FLAG_LARGE_FIFO)
+ != 0)
+ &&
+ ((devAttr->
+ flags &
+ DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
+ == 0)) {
+ /* This channel is a large fifo - don't tie it up */
+ /* with devices that we don't want using it. */
+
+ continue;
+ }
+
+ channel->flags |=
+ DMA_CHANNEL_FLAG_IN_USE;
+ channel->devType = dev;
+ devAttr->flags |=
+ DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ channel->fileName = fileName;
+ channel->lineNum = lineNum;
+#endif
+ handle =
+ MAKE_HANDLE(controllerIdx,
+ channelIdx);
+
+ /* Now that we've reserved the channel - we can go ahead and configure it */
+
+ if (ConfigChannel(handle) != 0) {
+ handle = -EIO;
+ printk(KERN_ERR
+ "dma_request_channel: ConfigChannel failed\n");
+ }
+ goto out;
+ }
+ }
+ }
+ }
+
+ /* No channels are currently available. Let's wait for one to free up. */
+
+ {
+ DEFINE_WAIT(wait);
+
+ prepare_to_wait(&gDMA.freeChannelQ, &wait,
+ TASK_INTERRUPTIBLE);
+ up(&gDMA.lock);
+ schedule();
+ finish_wait(&gDMA.freeChannelQ, &wait);
+
+ if (signal_pending(current)) {
+ /* We don't currently hold gDMA.lock, so we return directly */
+
+ return -ERESTARTSYS;
+ }
+ }
+
+ if (down_interruptible(&gDMA.lock)) {
+ return -ERESTARTSYS;
+ }
+ }
+
+out:
+ up(&gDMA.lock);
+
+ return handle;
+}
+
+/* Create both _dbg and non _dbg functions for modules. */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+#undef dma_request_channel
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+{
+ return dma_request_channel_dbg(dev, __FILE__, __LINE__);
+}
+
+EXPORT_SYMBOL(dma_request_channel_dbg);
+#endif
+EXPORT_SYMBOL(dma_request_channel);
+
+/****************************************************************************/
+/**
+* Frees a previously allocated DMA Handle.
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t handle /* DMA handle. */
+ ) {
+ int rc = 0;
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
+ channel->lastDevType = channel->devType;
+ channel->devType = DMA_DEVICE_NONE;
+ }
+ channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
+ devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
+
+out:
+ up(&gDMA.lock);
+
+ wake_up_interruptible(&gDMA.freeChannelQ);
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_free_channel);
+
+/****************************************************************************/
+/**
+* Determines if a given device has been configured as using a shared
+* channel.
+*
+* @return
+* 0 Device uses a dedicated channel
+* > zero Device uses a shared channel
+* < zero Error code
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t device /* Device to check. */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
+}
+
+EXPORT_SYMBOL(dma_device_is_channel_shared);
+
+/****************************************************************************/
+/**
+* Allocates buffers for the descriptors. This is normally done automatically
+* but needs to be done explicitly when initiating a dma from interrupt
+* context.
+*
+* @return
+* 0 Descriptors were allocated successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int numDescriptors;
+ size_t ringBytesRequired;
+ int rc = 0;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ if (devAttr->config.transferType != transferType) {
+ return -EINVAL;
+ }
+
+ /* Figure out how many descriptors we need. */
+
+ /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+ /* srcData, dstData, numBytes); */
+
+ numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+ (void *)srcData,
+ (void *)dstData,
+ numBytes);
+ if (numDescriptors < 0) {
+ printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+ /* a new one. */
+
+ ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+ /* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+ if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+ /* Make sure that this code path is never taken from interrupt context. */
+ /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+ /* allocation needs to have already been done. */
+
+ might_sleep();
+
+ /* Free the old descriptor ring and allocate a new one. */
+
+ dma_free_descriptor_ring(&devAttr->ring);
+
+ /* And allocate a new one. */
+
+ rc =
+ dma_alloc_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_alloc_descriptor_ring(%d) failed\n",
+ __func__, numDescriptors);
+ return rc;
+ }
+ /* Setup the descriptor for this transfer */
+
+ if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+ devAttr->ring.physAddr,
+ devAttr->ring.bytesAllocated,
+ numDescriptors) < 0) {
+ printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
+ __func__);
+ return -EINVAL;
+ }
+ } else {
+ /* We've already got enough ring buffer allocated. All we need to do is reset */
+ /* any control information, just in case the previous DMA was stopped. */
+
+ dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
+ }
+
+ /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+ /* as last time, then we don't need to call setDataDescriptor again. */
+
+ if (dmacHw_setDataDescriptor(&devAttr->config,
+ devAttr->ring.virtAddr,
+ (void *)srcData,
+ (void *)dstData, numBytes) < 0) {
+ printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Remember the critical information for this transfer so that we can eliminate */
+ /* another call to dma_alloc_descriptors if the caller reuses the same buffers */
+
+ devAttr->prevSrcData = srcData;
+ devAttr->prevDstData = dstData;
+ devAttr->prevNumBytes = numBytes;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptors);
+
+/****************************************************************************/
+/**
+* Allocates and sets up descriptors for a double buffered circular buffer.
+*
+* This is primarily intended to be used for things like the ingress samples
+* from a microphone.
+*
+* @return
+* > 0 Number of descriptors actually allocated.
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Physical address of source data */
+ dma_addr_t dstData1, /* Physical address of first destination buffer */
+ dma_addr_t dstData2, /* Physical address of second destination buffer */
+ size_t numBytes /* Number of bytes in each destination buffer */
+ ) {
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int numDst1Descriptors;
+ int numDst2Descriptors;
+ int numDescriptors;
+ size_t ringBytesRequired;
+ int rc = 0;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ /* Figure out how many descriptors we need. */
+
+ /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+ /* srcData, dstData, numBytes); */
+
+ numDst1Descriptors =
+ dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+ (void *)dstData1, numBytes);
+ if (numDst1Descriptors < 0) {
+ return -EINVAL;
+ }
+ numDst2Descriptors =
+ dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+ (void *)dstData2, numBytes);
+ if (numDst2Descriptors < 0) {
+ return -EINVAL;
+ }
+ numDescriptors = numDst1Descriptors + numDst2Descriptors;
+ /* printk("numDescriptors: %d\n", numDescriptors); */
+
+ /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+ /* a new one. */
+
+ ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+ /* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+ if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+ /* Make sure that this code path is never taken from interrupt context. */
+ /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+ /* allocation needs to have already been done. */
+
+ might_sleep();
+
+ /* Free the old descriptor ring and allocate a new one. */
+
+ dma_free_descriptor_ring(&devAttr->ring);
+
+ /* And allocate a new one. */
+
+ rc =
+ dma_alloc_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_alloc_descriptor_ring(%d) failed\n",
+ __func__, ringBytesRequired);
+ return rc;
+ }
+ }
+
+ /* Setup the descriptor for this transfer. Since this function is used with */
+ /* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
+ /* setDataDescriptor will keep trying to append onto the end. */
+
+ if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+ devAttr->ring.physAddr,
+ devAttr->ring.bytesAllocated,
+ numDescriptors) < 0) {
+ printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
+ return -EINVAL;
+ }
+
+ /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+ /* as last time, then we don't need to call setDataDescriptor again. */
+
+ if (dmacHw_setDataDescriptor(&devAttr->config,
+ devAttr->ring.virtAddr,
+ (void *)srcData,
+ (void *)dstData1, numBytes) < 0) {
+ printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
+ __func__);
+ return -EINVAL;
+ }
+ if (dmacHw_setDataDescriptor(&devAttr->config,
+ devAttr->ring.virtAddr,
+ (void *)srcData,
+ (void *)dstData2, numBytes) < 0) {
+ printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
+ /* try to make the 'prev' variables right. */
+
+ devAttr->prevSrcData = 0;
+ devAttr->prevDstData = 0;
+ devAttr->prevNumBytes = 0;
+
+ return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
+
+/****************************************************************************/
+/**
+* Initiates a transfer when the descriptors have already been setup.
+*
+* This is a special case, and normally, the dma_transfer_xxx functions should
+* be used.
+*
+* @return
+* 0 Transfer was started successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+ devAttr->ring.virtAddr);
+
+ /* Since we got this far, everything went successfully */
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_start_transfer);
+
+/****************************************************************************/
+/**
+* Stops a previously started DMA transfer.
+*
+* @return
+* 0 Transfer was stopped successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ dmacHw_stopTransfer(channel->dmacHwHandle);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_stop_transfer);
+
+/****************************************************************************/
+/**
+* Waits for a DMA to complete by polling. This function is only intended
+* to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+ dmacHw_TRANSFER_STATUS_e status;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ while ((status =
+ dmacHw_transferCompleted(channel->dmacHwHandle)) ==
+ dmacHw_TRANSFER_STATUS_BUSY) {
+ ;
+ }
+
+ if (status == dmacHw_TRANSFER_STATUS_ERROR) {
+ printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
+ return -EIO;
+ }
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_wait_transfer_done);
+
+/****************************************************************************/
+/**
+* Initiates a DMA, allocating the descriptors as required.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int rc = 0;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ if (devAttr->config.transferType != transferType) {
+ return -EINVAL;
+ }
+
+ /* We keep track of the information about the previous request for this */
+ /* device, and if the attributes match, then we can use the descriptors we setup */
+ /* the last time, and not have to reinitialize everything. */
+
+ {
+ rc =
+ dma_alloc_descriptors(handle, transferType, srcData,
+ dstData, numBytes);
+ if (rc != 0) {
+ return rc;
+ }
+ }
+
+ /* And kick off the transfer */
+
+ devAttr->numBytes = numBytes;
+ devAttr->transferStartTime = timer_get_tick_count();
+
+ dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+ devAttr->ring.virtAddr);
+
+ /* Since we got this far, everything went successfully */
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_transfer);
+
+/****************************************************************************/
+/**
+* Set the callback function which will be called when a transfer completes.
+* If a NULL callback function is set, then no callback will occur.
+*
+* @note @a devHandler will be called from IRQ context.
+*
+* @return
+* 0 - Success
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. */
+ DMA_DeviceHandler_t devHandler, /* Function to call when the DMA completes */
+ void *userData /* Pointer which will be passed to devHandler. */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+ unsigned long flags;
+
+ if (!IsDeviceValid(dev)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[dev];
+
+ local_irq_save(flags);
+
+ devAttr->userData = userData;
+ devAttr->devHandler = devHandler;
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_handler);
+
+/****************************************************************************/
+/**
+* Initializes a memory mapping structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap)
+{
+ memset(memMap, 0, sizeof(*memMap));
+
+ init_MUTEX(&memMap->lock);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_init_mem_map);
+
+/****************************************************************************/
+/**
+* Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap)
+{
+ down(&memMap->lock); /* Just being paranoid */
+
+ /* Free up any allocated memory */
+
+ up(&memMap->lock);
+ memset(memMap, 0, sizeof(*memMap));
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_term_mem_map);
+
+/****************************************************************************/
+/**
+* Looks at a memory address and categorizes it.
+*
+* @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr)
+{
+ unsigned long addrVal = (unsigned long)addr;
+
+ if (addrVal >= VMALLOC_END) {
+ /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
+
+ /* dma_alloc_xxx pages are physically and virtually contiguous */
+
+ return DMA_MEM_TYPE_DMA;
+ }
+
+ /* Technically, we could add one more classification. Addresses between VMALLOC_END */
+ /* and the beginning of the DMA virtual address could be considered to be I/O space. */
+ /* Right now, nobody cares about this particular classification, so we ignore it. */
+
+ if (is_vmalloc_addr(addr)) {
+ /* Address comes from the vmalloc'd region. Pages are virtually */
+ /* contiguous but NOT physically contiguous */
+
+ return DMA_MEM_TYPE_VMALLOC;
+ }
+
+ if (addrVal >= PAGE_OFFSET) {
+ /* PAGE_OFFSET is typically 0xC0000000 */
+
+ /* kmalloc'd pages are physically contiguous */
+
+ return DMA_MEM_TYPE_KMALLOC;
+ }
+
+ return DMA_MEM_TYPE_USER;
+}
+
+EXPORT_SYMBOL(dma_mem_type);
+
+/****************************************************************************/
+/**
+* Looks at a memory address and determines if we support DMA'ing to/from
+* that type of memory.
+*
+* @return boolean -
+* return value != 0 means dma supported
+* return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr)
+{
+ DMA_MemType_t memType = dma_mem_type(addr);
+
+ return (memType == DMA_MEM_TYPE_DMA)
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+ || (memType == DMA_MEM_TYPE_KMALLOC)
+#endif
+ || (memType == DMA_MEM_TYPE_USER);
+}
+
+EXPORT_SYMBOL(dma_mem_supports_dma);
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ ) {
+ int rc;
+
+ down(&memMap->lock);
+
+ DMA_MAP_PRINT("memMap: %p\n", memMap);
+
+ if (memMap->inUse) {
+ printk(KERN_ERR "%s: memory map %p is already being used\n",
+ __func__, memMap);
+ rc = -EBUSY;
+ goto out;
+ }
+
+ memMap->inUse = 1;
+ memMap->dir = dir;
+ memMap->numRegionsUsed = 0;
+
+ rc = 0;
+
+out:
+
+ DMA_MAP_PRINT("returning %d", rc);
+
+ up(&memMap->lock);
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_start);
+
+/****************************************************************************/
+/**
+* Adds a segment of memory to a memory map. Each segment is both
+* physically and virtually contiguous.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ DMA_Region_t *region, /* Region that the segment belongs to */
+ void *virtAddr, /* Virtual address of the segment being added */
+ dma_addr_t physAddr, /* Physical address of the segment being added */
+ size_t numBytes /* Number of bytes of the segment being added */
+ ) {
+ DMA_Segment_t *segment;
+
+ DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
+ physAddr, numBytes);
+
+ /* Sanity check */
+
+ if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
+ || (((unsigned long)virtAddr + numBytes)) >
+ ((unsigned long)region->virtAddr + region->numBytes)) {
+ printk(KERN_ERR
+ "%s: virtAddr %p is outside region @ %p len: %d\n",
+ __func__, virtAddr, region->virtAddr, region->numBytes);
+ return -EINVAL;
+ }
+
+ if (region->numSegmentsUsed > 0) {
+ /* Check to see if this segment is physically contiguous with the previous one */
+
+ segment = &region->segment[region->numSegmentsUsed - 1];
+
+ if ((segment->physAddr + segment->numBytes) == physAddr) {
+ /* It is - just add on to the end */
+
+ DMA_MAP_PRINT("appending %d bytes to last segment\n",
+ numBytes);
+
+ segment->numBytes += numBytes;
+
+ return 0;
+ }
+ }
+
+ /* Reallocate to hold more segments, if required. */
+
+ if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
+ DMA_Segment_t *newSegment;
+ size_t oldSize =
+ region->numSegmentsAllocated * sizeof(*newSegment);
+ int newAlloc = region->numSegmentsAllocated + 4;
+ size_t newSize = newAlloc * sizeof(*newSegment);
+
+ newSegment = kmalloc(newSize, GFP_KERNEL);
+ if (newSegment == NULL) {
+ return -ENOMEM;
+ }
+ memcpy(newSegment, region->segment, oldSize);
+ memset(&((uint8_t *) newSegment)[oldSize], 0,
+ newSize - oldSize);
+ kfree(region->segment);
+
+ region->numSegmentsAllocated = newAlloc;
+ region->segment = newSegment;
+ }
+
+ segment = &region->segment[region->numSegmentsUsed];
+ region->numSegmentsUsed++;
+
+ segment->virtAddr = virtAddr;
+ segment->physAddr = physAddr;
+ segment->numBytes = numBytes;
+
+ DMA_MAP_PRINT("returning success\n");
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* Adds a region of memory to a memory map. Each region is virtually
+* contiguous, but not necessarily physically contiguous.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *mem, /* Virtual address that we want to get a map of */
+ size_t numBytes /* Number of bytes being mapped */
+ ) {
+ unsigned long addr = (unsigned long)mem;
+ unsigned int offset;
+ int rc = 0;
+ DMA_Region_t *region;
+ dma_addr_t physAddr;
+
+ down(&memMap->lock);
+
+ DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
+
+ if (!memMap->inUse) {
+ printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
+ __func__);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Reallocate to hold more regions. */
+
+ if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
+ DMA_Region_t *newRegion;
+ size_t oldSize =
+ memMap->numRegionsAllocated * sizeof(*newRegion);
+ int newAlloc = memMap->numRegionsAllocated + 4;
+ size_t newSize = newAlloc * sizeof(*newRegion);
+
+ newRegion = kmalloc(newSize, GFP_KERNEL);
+ if (newRegion == NULL) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ memcpy(newRegion, memMap->region, oldSize);
+ memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
+
+ kfree(memMap->region);
+
+ memMap->numRegionsAllocated = newAlloc;
+ memMap->region = newRegion;
+ }
+
+ region = &memMap->region[memMap->numRegionsUsed];
+ memMap->numRegionsUsed++;
+
+ offset = addr & ~PAGE_MASK;
+
+ region->memType = dma_mem_type(mem);
+ region->virtAddr = mem;
+ region->numBytes = numBytes;
+ region->numSegmentsUsed = 0;
+ region->numLockedPages = 0;
+ region->lockedPages = NULL;
+
+ switch (region->memType) {
+ case DMA_MEM_TYPE_VMALLOC:
+ {
+ atomic_inc(&gDmaStatMemTypeVmalloc);
+
+ /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
+
+ /* vmalloc'd pages are not physically contiguous */
+
+ rc = -EINVAL;
+ break;
+ }
+
+ case DMA_MEM_TYPE_KMALLOC:
+ {
+ atomic_inc(&gDmaStatMemTypeKmalloc);
+
+ /* kmalloc'd pages are physically contiguous, so they'll have exactly */
+ /* one segment */
+
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+ physAddr =
+ dma_map_single(NULL, mem, numBytes, memMap->dir);
+ rc = dma_map_add_segment(memMap, region, mem, physAddr,
+ numBytes);
+#else
+ rc = -EINVAL;
+#endif
+ break;
+ }
+
+ case DMA_MEM_TYPE_DMA:
+ {
+ /* dma_alloc_xxx pages are physically contiguous */
+
+ atomic_inc(&gDmaStatMemTypeCoherent);
+
+ physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
+
+ dma_sync_single_for_cpu(NULL, physAddr, numBytes,
+ memMap->dir);
+ rc = dma_map_add_segment(memMap, region, mem, physAddr,
+ numBytes);
+ break;
+ }
+
+ case DMA_MEM_TYPE_USER:
+ {
+ size_t firstPageOffset;
+ size_t firstPageSize;
+ struct page **pages;
+ struct task_struct *userTask;
+
+ atomic_inc(&gDmaStatMemTypeUser);
+
+#if 1
+ /* If the pages are user pages, then the dma_mem_map_set_user_task function */
+ /* must have been previously called. */
+
+ if (memMap->userTask == NULL) {
+ printk(KERN_ERR
+ "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* User pages need to be locked. */
+
+ firstPageOffset =
+ (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
+ firstPageSize = PAGE_SIZE - firstPageOffset;
+
+ region->numLockedPages = (firstPageOffset
+ + region->numBytes +
+ PAGE_SIZE - 1) / PAGE_SIZE;
+ pages =
+ kmalloc(region->numLockedPages *
+ sizeof(struct page *), GFP_KERNEL);
+
+ if (pages == NULL) {
+ region->numLockedPages = 0;
+ return -ENOMEM;
+ }
+
+ userTask = memMap->userTask;
+
+ down_read(&userTask->mm->mmap_sem);
+ rc = get_user_pages(userTask, /* task */
+ userTask->mm, /* mm */
+ (unsigned long)region->virtAddr, /* start */
+ region->numLockedPages, /* len */
+ memMap->dir == DMA_FROM_DEVICE, /* write */
+ 0, /* force */
+ pages, /* pages (array of pointers to page) */
+ NULL); /* vmas */
+ up_read(&userTask->mm->mmap_sem);
+
+ if (rc != region->numLockedPages) {
+ kfree(pages);
+ region->numLockedPages = 0;
+
+ if (rc >= 0) {
+ rc = -EINVAL;
+ }
+ } else {
+ uint8_t *virtAddr = region->virtAddr;
+ size_t bytesRemaining;
+ int pageIdx;
+
+ rc = 0; /* Since get_user_pages returns +ve number */
+
+ region->lockedPages = pages;
+
+ /* We've locked the user pages. Now we need to walk them and figure */
+ /* out the physical addresses. */
+
+ /* The first page may be partial */
+
+ dma_map_add_segment(memMap,
+ region,
+ virtAddr,
+ PFN_PHYS(page_to_pfn
+ (pages[0])) +
+ firstPageOffset,
+ firstPageSize);
+
+ virtAddr += firstPageSize;
+ bytesRemaining =
+ region->numBytes - firstPageSize;
+
+ for (pageIdx = 1;
+ pageIdx < region->numLockedPages;
+ pageIdx++) {
+ size_t bytesThisPage =
+ (bytesRemaining >
+ PAGE_SIZE ? PAGE_SIZE :
+ bytesRemaining);
+
+ DMA_MAP_PRINT
+ ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
+ pageIdx, pages[pageIdx],
+ page_to_pfn(pages[pageIdx]),
+ PFN_PHYS(page_to_pfn
+ (pages[pageIdx])));
+
+ dma_map_add_segment(memMap,
+ region,
+ virtAddr,
+ PFN_PHYS(page_to_pfn
+ (pages
+ [pageIdx])),
+ bytesThisPage);
+
+ virtAddr += bytesThisPage;
+ bytesRemaining -= bytesThisPage;
+ }
+ }
+#else
+ printk(KERN_ERR
+ "%s: User mode pages are not yet supported\n",
+ __func__);
+
+ /* user pages are not physically contiguous */
+
+ rc = -EINVAL;
+#endif
+ break;
+ }
+
+ default:
+ {
+ printk(KERN_ERR "%s: Unsupported memory type: %d\n",
+ __func__, region->memType);
+
+ rc = -EINVAL;
+ break;
+ }
+ }
+
+ if (rc != 0) {
+ memMap->numRegionsUsed--;
+ }
+
+out:
+
+ DMA_MAP_PRINT("returning %d\n", rc);
+
+ up(&memMap->lock);
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_add_segment);
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *mem, /* Virtual address that we want to get a map of */
+ size_t numBytes, /* Number of bytes being mapped */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ ) {
+ int rc;
+
+ rc = dma_map_start(memMap, dir);
+ if (rc == 0) {
+ rc = dma_map_add_region(memMap, mem, numBytes);
+ if (rc < 0) {
+ /* Since the add fails, this function will fail, and the caller won't */
+ /* call unmap, so we need to do it here. */
+
+ dma_unmap(memMap, 0);
+ }
+ }
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_mem);
+
+/****************************************************************************/
+/**
+* Setup a descriptor ring for a given memory map.
+*
+* It is assumed that the descriptor ring has already been initialized, and
+* this routine will only reallocate a new descriptor ring if the existing
+* one is too small.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
+ DMA_MemMap_t *memMap, /* Memory map that will be used */
+ dma_addr_t devPhysAddr /* Physical address of device */
+ ) {
+ int rc;
+ int numDescriptors;
+ DMA_DeviceAttribute_t *devAttr;
+ DMA_Region_t *region;
+ DMA_Segment_t *segment;
+ dma_addr_t srcPhysAddr;
+ dma_addr_t dstPhysAddr;
+ int regionIdx;
+ int segmentIdx;
+
+ devAttr = &DMA_gDeviceAttribute[dev];
+
+ down(&memMap->lock);
+
+ /* Figure out how many descriptors we need */
+
+ numDescriptors = 0;
+ for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+ region = &memMap->region[regionIdx];
+
+ for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+ segmentIdx++) {
+ segment = &region->segment[segmentIdx];
+
+ if (memMap->dir == DMA_TO_DEVICE) {
+ srcPhysAddr = segment->physAddr;
+ dstPhysAddr = devPhysAddr;
+ } else {
+ srcPhysAddr = devPhysAddr;
+ dstPhysAddr = segment->physAddr;
+ }
+
+ rc =
+ dma_calculate_descriptor_count(dev, srcPhysAddr,
+ dstPhysAddr,
+ segment->
+ numBytes);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_calculate_descriptor_count failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ numDescriptors += rc;
+ }
+ }
+
+ /* Adjust the size of the ring, if it isn't big enough */
+
+ if (numDescriptors > devAttr->ring.descriptorsAllocated) {
+ dma_free_descriptor_ring(&devAttr->ring);
+ rc =
+ dma_alloc_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_alloc_descriptor_ring failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ } else {
+ rc =
+ dma_init_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_init_descriptor_ring failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ }
+
+ /* Populate the descriptors */
+
+ for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+ region = &memMap->region[regionIdx];
+
+ for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+ segmentIdx++) {
+ segment = &region->segment[segmentIdx];
+
+ if (memMap->dir == DMA_TO_DEVICE) {
+ srcPhysAddr = segment->physAddr;
+ dstPhysAddr = devPhysAddr;
+ } else {
+ srcPhysAddr = devPhysAddr;
+ dstPhysAddr = segment->physAddr;
+ }
+
+ rc =
+ dma_add_descriptors(&devAttr->ring, dev,
+ srcPhysAddr, dstPhysAddr,
+ segment->numBytes);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_add_descriptors failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ }
+ }
+
+ rc = 0;
+
+out:
+
+ up(&memMap->lock);
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_create_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ int dirtied /* non-zero if any of the pages were modified */
+ ) {
+ int regionIdx;
+ int segmentIdx;
+ DMA_Region_t *region;
+ DMA_Segment_t *segment;
+
+ for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+ region = &memMap->region[regionIdx];
+
+ for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+ segmentIdx++) {
+ segment = &region->segment[segmentIdx];
+
+ switch (region->memType) {
+ case DMA_MEM_TYPE_VMALLOC:
+ {
+ printk(KERN_ERR
+ "%s: vmalloc'd pages are not yet supported\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ case DMA_MEM_TYPE_KMALLOC:
+ {
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+ dma_unmap_single(NULL,
+ segment->physAddr,
+ segment->numBytes,
+ memMap->dir);
+#endif
+ break;
+ }
+
+ case DMA_MEM_TYPE_DMA:
+ {
+ dma_sync_single_for_cpu(NULL,
+ segment->
+ physAddr,
+ segment->
+ numBytes,
+ memMap->dir);
+ break;
+ }
+
+ case DMA_MEM_TYPE_USER:
+ {
+ /* Nothing to do here. */
+
+ break;
+ }
+
+ default:
+ {
+ printk(KERN_ERR
+ "%s: Unsupported memory type: %d\n",
+ __func__, region->memType);
+ return -EINVAL;
+ }
+ }
+
+ segment->virtAddr = NULL;
+ segment->physAddr = 0;
+ segment->numBytes = 0;
+ }
+
+ if (region->numLockedPages > 0) {
+ int pageIdx;
+
+ /* Some user pages were locked. We need to go and unlock them now. */
+
+ for (pageIdx = 0; pageIdx < region->numLockedPages;
+ pageIdx++) {
+ struct page *page =
+ region->lockedPages[pageIdx];
+
+ if (memMap->dir == DMA_FROM_DEVICE) {
+ SetPageDirty(page);
+ }
+ page_cache_release(page);
+ }
+ kfree(region->lockedPages);
+ region->numLockedPages = 0;
+ region->lockedPages = NULL;
+ }
+
+ region->memType = DMA_MEM_TYPE_NONE;
+ region->virtAddr = NULL;
+ region->numBytes = 0;
+ region->numSegmentsUsed = 0;
+ }
+ memMap->userTask = NULL;
+ memMap->numRegionsUsed = 0;
+ memMap->inUse = 0;
+
+ up(&memMap->lock);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_unmap);
diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c
new file mode 100644
index 00000000000..ca0ad736870
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma_device.c
@@ -0,0 +1,593 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dma_device.c
+*
+* @brief private array of DMA_DeviceAttribute_t
+*/
+/****************************************************************************/
+
+DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
+ [DMA_DEVICE_MEM_TO_MEM] = /* MEM 2 MEM */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "mem-to-mem",
+ .config = {
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+
+ },
+ },
+ [DMA_DEVICE_VPM_MEM_TO_MEM] = /* VPM */
+ {
+ .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
+ .name = "vpm",
+ .dedicatedController = 0,
+ .dedicatedChannel = 0,
+ /* reserve DMA0:0 for VPM */
+ },
+ [DMA_DEVICE_NAND_MEM_TO_MEM] = /* NAND */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "nand",
+ .config = {
+ .srcPeripheralPort = 0,
+ .dstPeripheralPort = 0,
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
+ },
+ },
+ [DMA_DEVICE_PIF_MEM_TO_DEV] = /* PIF TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+ | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+ | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+ .name = "pif_tx",
+ .dmacPort = {14, 5},
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ /* dstPeripheralPort = 5 or 14 */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .maxDataPerBlock = 16256,
+ },
+ },
+ [DMA_DEVICE_PIF_DEV_TO_MEM] = /* PIF RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+ | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+ /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
+ | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+ .name = "pif_rx",
+ .dmacPort = {14, 5},
+ .config = {
+ /* srcPeripheralPort = 5 or 14 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .maxDataPerBlock = 16256,
+ },
+ },
+ [DMA_DEVICE_I2S0_DEV_TO_MEM] = /* I2S RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "i2s0_rx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: I2S0 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_I2S0_MEM_TO_DEV] = /* I2S TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "i2s0_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 1, /* DST: I2S0 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_I2S1_DEV_TO_MEM] = /* I2S1 RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "i2s1_rx",
+ .config = {
+ .srcPeripheralPort = 2, /* SRC: I2S1 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_I2S1_MEM_TO_DEV] = /* I2S1 TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "i2s1_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 3, /* DST: I2S1 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_ESW_MEM_TO_DEV] = /* ESW TX */
+ {
+ .name = "esw_tx",
+ .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+ .dedicatedController = 1,
+ .dedicatedChannel = 3,
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 1, /* DST: ESW (MTP) */
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+ /* DMAx_AHB_SSTATARy */
+ .srcStatusRegisterAddress = 0x00000000,
+ /* DMAx_AHB_DSTATARy */
+ .dstStatusRegisterAddress = 0x30490010,
+ /* DMAx_AHB_CFGy */
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ /* DMAx_AHB_CTLy */
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ },
+ },
+ [DMA_DEVICE_ESW_DEV_TO_MEM] = /* ESW RX */
+ {
+ .name = "esw_rx",
+ .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+ .dedicatedController = 1,
+ .dedicatedChannel = 2,
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: ESW (PTM) */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+ /* DMAx_AHB_SSTATARy */
+ .srcStatusRegisterAddress = 0x30480010,
+ /* DMAx_AHB_DSTATARy */
+ .dstStatusRegisterAddress = 0x00000000,
+ /* DMAx_AHB_CFGy */
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ /* DMAx_AHB_CTLy */
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] = /* APM Codec A Ingress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_a_rx",
+ .config = {
+ .srcPeripheralPort = 2, /* SRC: Codec A Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] = /* APM Codec A Egress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_a_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 3, /* DST: Codec A Egress FIFO */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] = /* APM Codec B Ingress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_b_rx",
+ .config = {
+ .srcPeripheralPort = 4, /* SRC: Codec B Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] = /* APM Codec B Egress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_b_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 5, /* DST: Codec B Egress FIFO */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] = /* APM Codec C Ingress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "apm_c_rx",
+ .config = {
+ .srcPeripheralPort = 4, /* SRC: Codec C Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_PCM0_DEV_TO_MEM] = /* PCM0 RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "pcm0_rx",
+ .config = {
+ .srcPeripheralPort = 12, /* SRC: PCM0 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_PCM0_MEM_TO_DEV] = /* PCM0 TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "pcm0_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 13, /* DST: PCM0 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_APM_PCM1_DEV_TO_MEM] = /* PCM1 RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "pcm1_rx",
+ .config = {
+ .srcPeripheralPort = 14, /* SRC: PCM1 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_PCM1_MEM_TO_DEV] = /* PCM1 TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "pcm1_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 15, /* DST: PCM1 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_SPUM_DEV_TO_MEM] = /* SPUM RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "spum_rx",
+ .config = {
+ .srcPeripheralPort = 6, /* SRC: Codec A Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ /* Busrt size **MUST** be 16 for SPUM to work */
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ /* on the RX side, SPU needs to be the flow controller */
+ .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
+ },
+ },
+ [DMA_DEVICE_SPUM_MEM_TO_DEV] = /* SPUM TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "spum_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 7, /* DST: SPUM */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ /* Busrt size **MUST** be 16 for SPUM to work */
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_MEM_TO_VRAM] = /* MEM 2 VRAM */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "mem-to-vram",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ },
+ },
+ [DMA_DEVICE_VRAM_TO_MEM] = /* VRAM 2 MEM */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "vram-to-mem",
+ .config = {
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ },
+ },
+};
+EXPORT_SYMBOL(DMA_gDeviceAttribute); /* primarily for dma-test.c */
diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h
new file mode 100644
index 00000000000..f01da877148
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global.h
@@ -0,0 +1,13 @@
+#ifndef _CFG_GLOBAL_H_
+#define _CFG_GLOBAL_H_
+
+#include <cfg_global_defines.h>
+
+#define CFG_GLOBAL_CHIP BCM11107
+#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING
+#define CFG_GLOBAL_CHIP_REV 0xB0
+#define CFG_GLOBAL_RAM_SIZE 0x10000000
+#define CFG_GLOBAL_RAM_BASE 0x00000000
+#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000
+
+#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h
new file mode 100644
index 00000000000..b5beb0b3073
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global_defines.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CFG_GLOBAL_DEFINES_H
+#define CFG_GLOBAL_DEFINES_H
+
+/* CHIP */
+#define BCM1103 1
+
+#define BCM1191 4
+#define BCM2153 5
+#define BCM2820 6
+
+#define BCM2826 8
+#define FPGA11107 9
+#define BCM11107 10
+#define BCM11109 11
+#define BCM11170 12
+#define BCM11110 13
+#define BCM11211 14
+
+/* CFG_GLOBAL_CHIP_FAMILY types */
+#define CFG_GLOBAL_CHIP_FAMILY_NONE 0
+#define CFG_GLOBAL_CHIP_FAMILY_BCM116X 2
+#define CFG_GLOBAL_CHIP_FAMILY_BCMRING 4
+#define CFG_GLOBAL_CHIP_FAMILY_BCM1103 8
+
+#define IMAGE_HEADER_SIZE_CHECKSUM 4
+#endif
diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h
new file mode 100644
index 00000000000..caa20e59db9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/cache.h
@@ -0,0 +1,35 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_CACHE_H
+#define CSP_CACHE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <asm/cacheflush.h>
+
+#define CSP_CACHE_FLUSH_ALL flush_cache_all()
+
+#else
+
+#define CSP_CACHE_FLUSH_ALL
+
+#endif
+
+#endif /* CSP_CACHE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h
new file mode 100644
index 00000000000..8b3d8036729
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/delay.h
@@ -0,0 +1,36 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_DELAY_H
+#define CSP_DELAY_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+/* Some CSP routines require use of the following delay routines. Use the OS */
+/* version if available, otherwise use a CSP specific definition. */
+/* void udelay(unsigned long usecs); */
+/* void mdelay(unsigned long msecs); */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+ #include <linux/delay.h>
+#else
+ #include <mach/csp/delay.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_DELAY_H */
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
new file mode 100644
index 00000000000..5d510130a25
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -0,0 +1,596 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw.h
+*
+* @brief API definitions for low level DMA controller driver
+*
+*/
+/****************************************************************************/
+#ifndef _DMACHW_H
+#define _DMACHW_H
+
+#include <stddef.h>
+
+#include <csp/stdint.h>
+#include <mach/csp/dmacHw_reg.h>
+
+/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
+
+ System specific channel ID should be defined as follows
+
+ For example:
+
+ #include <dmacHw.h>
+ ...
+ #define systemHw_LCD_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,5)
+ #define systemHw_SWITCH_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,0)
+ #define systemHw_SWITCH_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,1)
+ #define systemHw_APM_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,3)
+ #define systemHw_APM_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,4)
+ ...
+ #define systemHw_SHARED1_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,4)
+ #define systemHw_SHARED2_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,5)
+ #define systemHw_SHARED3_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,6)
+ ...
+*/
+#define dmacHw_MAKE_CHANNEL_ID(m, c) (m << 8 | c)
+
+typedef enum {
+ dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0, /* Channel priority 0. Lowest priority DMA channel */
+ dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1, /* Channel priority 1 */
+ dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2, /* Channel priority 2 */
+ dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3, /* Channel priority 3 */
+ dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4, /* Channel priority 4 */
+ dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5, /* Channel priority 5 */
+ dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6, /* Channel priority 6 */
+ dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7 /* Channel priority 7. Highest priority DMA channel */
+} dmacHw_CHANNEL_PRIORITY_e;
+
+/* Source destination master interface */
+typedef enum {
+ dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1, /* Source DMA master interface 1 */
+ dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2, /* Source DMA master interface 2 */
+ dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1, /* Destination DMA master interface 1 */
+ dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2 /* Destination DMA master interface 2 */
+} dmacHw_MASTER_INTERFACE_e;
+
+typedef enum {
+ dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8, /* Source 8 bit (1 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16, /* Source 16 bit (2 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32, /* Source 32 bit (4 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64, /* Source 64 bit (8 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8, /* Destination 8 bit (1 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16, /* Destination 16 bit (2 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32, /* Destination 32 bit (4 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64 /* Destination 64 bit (8 byte) per transaction */
+} dmacHw_TRANSACTION_WIDTH_e;
+
+typedef enum {
+ dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0, /* Source No burst */
+ dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4, /* Source 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8, /* Source 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16, /* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0, /* Destination No burst */
+ dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4, /* Destination 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8, /* Destination 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16 /* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+} dmacHw_BURST_WIDTH_e;
+
+typedef enum {
+ dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC, /* Memory to memory transfer */
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC, /* Peripheral to memory transfer */
+ dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC, /* Memory to peripheral transfer */
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC /* Peripheral to peripheral transfer */
+} dmacHw_TRANSFER_TYPE_e;
+
+typedef enum {
+ dmacHw_TRANSFER_MODE_PERREQUEST, /* Block transfer per DMA request */
+ dmacHw_TRANSFER_MODE_CONTINUOUS, /* Continuous transfer of streaming data */
+ dmacHw_TRANSFER_MODE_PERIODIC /* Periodic transfer of streaming data */
+} dmacHw_TRANSFER_MODE_e;
+
+typedef enum {
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC, /* Increment source address after every transaction */
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC, /* Decrement source address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC, /* Increment destination address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC, /* Decrement destination address after every transaction */
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC, /* No change in source address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC /* No change in destination address after every transaction */
+} dmacHw_ADDRESS_UPDATE_MODE_e;
+
+typedef enum {
+ dmacHw_FLOW_CONTROL_DMA, /* DMA working as flow controller (default) */
+ dmacHw_FLOW_CONTROL_PERIPHERAL /* Peripheral working as flow controller */
+} dmacHw_FLOW_CONTROL_e;
+
+typedef enum {
+ dmacHw_TRANSFER_STATUS_BUSY, /* DMA Transfer ongoing */
+ dmacHw_TRANSFER_STATUS_DONE, /* DMA Transfer completed */
+ dmacHw_TRANSFER_STATUS_ERROR /* DMA Transfer error */
+} dmacHw_TRANSFER_STATUS_e;
+
+typedef enum {
+ dmacHw_INTERRUPT_DISABLE, /* Interrupt disable */
+ dmacHw_INTERRUPT_ENABLE /* Interrupt enable */
+} dmacHw_INTERRUPT_e;
+
+typedef enum {
+ dmacHw_INTERRUPT_STATUS_NONE = 0x0, /* No DMA interrupt */
+ dmacHw_INTERRUPT_STATUS_TRANS = 0x1, /* End of DMA transfer interrupt */
+ dmacHw_INTERRUPT_STATUS_BLOCK = 0x2, /* End of block transfer interrupt */
+ dmacHw_INTERRUPT_STATUS_ERROR = 0x4 /* Error interrupt */
+} dmacHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM, /* Number of DMA channel */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE, /* Maximum channel burst size */
+ dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM, /* Number of DMA master interface */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH, /* Channel Data bus width */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE /* Channel FIFO size */
+} dmacHw_CONTROLLER_ATTRIB_e;
+
+typedef unsigned long dmacHw_HANDLE_t; /* DMA channel handle */
+typedef uint32_t dmacHw_ID_t; /* DMA channel Id. Must be created using
+ "dmacHw_MAKE_CHANNEL_ID" macro
+ */
+/* DMA channel configuration parameters */
+typedef struct {
+ uint32_t srcPeripheralPort; /* Source peripheral port */
+ uint32_t dstPeripheralPort; /* Destination peripheral port */
+ uint32_t srcStatusRegisterAddress; /* Source status register address */
+ uint32_t dstStatusRegisterAddress; /* Destination status register address of type */
+
+ uint32_t srcGatherWidth; /* Number of bytes gathered before successive gather opearation */
+ uint32_t srcGatherJump; /* Number of bytes jumpped before successive gather opearation */
+ uint32_t dstScatterWidth; /* Number of bytes sacattered before successive scatter opearation */
+ uint32_t dstScatterJump; /* Number of bytes jumpped before successive scatter opearation */
+ uint32_t maxDataPerBlock; /* Maximum number of bytes to be transferred per block/descrptor.
+ 0 = Maximum possible.
+ */
+
+ dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate; /* Source address update mode */
+ dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate; /* Destination address update mode */
+ dmacHw_TRANSFER_TYPE_e transferType; /* DMA transfer type */
+ dmacHw_TRANSFER_MODE_e transferMode; /* DMA transfer mode */
+ dmacHw_MASTER_INTERFACE_e srcMasterInterface; /* DMA source interface */
+ dmacHw_MASTER_INTERFACE_e dstMasterInterface; /* DMA destination interface */
+ dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth; /* Source transaction width */
+ dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth; /* Destination transaction width */
+ dmacHw_BURST_WIDTH_e srcMaxBurstWidth; /* Source burst width */
+ dmacHw_BURST_WIDTH_e dstMaxBurstWidth; /* Destination burst width */
+ dmacHw_INTERRUPT_e blockTransferInterrupt; /* Block trsnafer interrupt */
+ dmacHw_INTERRUPT_e completeTransferInterrupt; /* Complete DMA trsnafer interrupt */
+ dmacHw_INTERRUPT_e errorInterrupt; /* Error interrupt */
+ dmacHw_CHANNEL_PRIORITY_e channelPriority; /* Channel priority */
+ dmacHw_FLOW_CONTROL_e flowControler; /* Data flow controller */
+} dmacHw_CONFIG_t;
+
+/****************************************************************************/
+/**
+* @brief Initializes DMA
+*
+* This function initializes DMA CSP driver
+*
+* @note
+* Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void);
+
+/****************************************************************************/
+/**
+* @brief Exit function for DMA
+*
+* This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void);
+
+/****************************************************************************/
+/**
+* @brief Gets a handle to a DMA channel
+*
+* This function returns a handle, representing a control block of a particular DMA channel
+*
+* @return -1 - On Failure
+* handle - On Success, representing a channel control block
+*
+* @note
+* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */
+ );
+
+/****************************************************************************/
+/**
+* @brief Initializes a DMA channel for use
+*
+* This function initializes and resets a DMA channel for use
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+* @return On failure : -1
+* On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Initializes descriptor ring
+*
+* This function will initializes the descriptor ring of a DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+* @note
+* - "len" parameter should be obtained from "dmacHw_descriptorLen"
+* - Descriptor buffer MUST be 32 bit aligned and uncached as it
+* is accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+ uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+ uint32_t len, /* [ IN ] Size of the pBuf */
+ uint32_t num /* [ IN ] Number of descriptor in the ring */
+ );
+
+/****************************************************************************/
+/**
+* @brief Finds amount of memory required to form a descriptor ring
+*
+*
+* @return Number of bytes required to form a descriptor ring
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configure DMA channel
+*
+* @return 0 : On success
+* -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set descriptors for known data length
+*
+* When DMA has to work as a flow controller, this function prepares the
+* descriptor chain to transfer data
+*
+* from:
+* - Memory to memory
+* - Peripheral to memory
+* - Memory to Peripheral
+* - Peripheral to Peripheral
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Indicates whether DMA transfer is in progress or completed
+*
+* @return DMA transfer status
+* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing
+* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed
+* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set descriptor carrying control information
+*
+* This function will be used to send specific control information to the device
+* using the DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t ctlAddress, /* [ IN ] Address of the device control register */
+ uint32_t control /* [ IN ] Device control information */
+ );
+
+/****************************************************************************/
+/**
+* @brief Read data DMA transferred to memory
+*
+* This function will read data that has been DMAed to memory while transfering from:
+* - Memory to memory
+* - Peripheral to memory
+*
+* @return 0 - No more data is available to read
+* 1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void **ppBbuf, /* [ OUT ] Data received */
+ size_t *pLlen /* [ OUT ] Length of the data received */
+ );
+
+/****************************************************************************/
+/**
+* @brief Prepares descriptor ring, when source peripheral working as a flow controller
+*
+* This function will form the descriptor ring by allocating buffers, when source peripheral
+* has to work as a flow controller to transfer data from:
+* - Peripheral to memory.
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t srcAddr, /* [ IN ] Source peripheral address */
+ void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */
+ int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+ int num /* [ IN ] Number of descriptor to set */
+ );
+
+/****************************************************************************/
+/**
+* @brief Program channel register to initiate transfer
+*
+* @return void
+*
+*
+* @note
+* - Descriptor buffer MUST ALWAYS be flushed before calling this function
+* - This function should also be called from ISR to program the channel with
+* pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Resets descriptor control information
+*
+* @return void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Program channel register to stop transfer
+*
+* Ensures the channel is not doing any transfer after calling this function
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Check the existance of pending descriptor
+*
+* This function confirmes if there is any pending descriptor in the chain
+* to program the channel
+*
+* @return 1 : Channel need to be programmed with pending descriptor
+* 0 : No more pending descriptor to programe the channel
+*
+* @note
+* - This function should be called from ISR in case there are pending
+* descriptor to program the channel.
+*
+* Example:
+*
+* dmac_isr ()
+* {
+* ...
+* if (dmacHw_descriptorPending (handle))
+* {
+* dmacHw_initiateTransfer (handle);
+* }
+* }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Deallocates source or destination memory, allocated
+*
+* This function can be called to deallocate data memory that was DMAed successfully
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* This function will be called ONLY, when source OR destination address is pointing
+* to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */
+ );
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the DMA channel specific interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Returns the cause of channel specific DMA interrupt
+*
+* This function returns the cause of interrupt
+*
+* @return Interrupt status, each bit representing a specific type of interrupt
+* of type dmacHw_INTERRUPT_STATUS_e
+* @note
+* This function should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Indentifies a DMA channel causing interrupt
+*
+* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+* @return NULL : No channel causing DMA interrupt
+* ! NULL : Handle to a channel causing DMA interrupt
+* @note
+* dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+* @brief Sets channel specific user data
+*
+* This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *userData /* [ IN ] User data */
+ );
+
+/****************************************************************************/
+/**
+* @brief Gets channel specific user data
+*
+* This function returns user data specific to a DMA channel
+*
+* @return user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Displays channel specific registers and other control parameters
+*
+*
+* @return void
+*
+* @note
+* None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+ );
+
+/****************************************************************************/
+/**
+* @brief Provides DMA controller attributes
+*
+*
+* @return DMA controller attributes
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */
+ );
+
+#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h
new file mode 100644
index 00000000000..51357dd5b66
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/errno.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_ERRNO_H
+#define CSP_ERRNO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if defined(__KERNEL__)
+#include <linux/errno.h>
+#elif defined(CSP_SIMULATION)
+#include <asm-generic/errno.h>
+#else
+#include <errno.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_ERRNO_H */
diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h
new file mode 100644
index 00000000000..1c639c8ee08
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/intcHw.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+/****************************************************************************/
+/**
+* @file intcHw.h
+*
+* @brief generic interrupt controller API
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_H
+#define _INTCHW_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/intcHw_reg.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask);
+static inline void intcHw_irq_enable(void *basep, uint32_t mask);
+
+#endif /* _INTCHW_H */
+
diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h
new file mode 100644
index 00000000000..c30d2a5975a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/module.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_MODULE_H
+#define CSP_MODULE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+ #include <linux/module.h>
+#else
+ #define EXPORT_SYMBOL(symbol)
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_MODULE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
new file mode 100644
index 00000000000..e5f60bf5a1f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -0,0 +1,114 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file reg.h
+*
+* @brief Generic register defintions used in CSP
+*/
+/****************************************************************************/
+
+#ifndef CSP_REG_H
+#define CSP_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define __REG32(x) (*((volatile uint32_t *)(x)))
+#define __REG16(x) (*((volatile uint16_t *)(x)))
+#define __REG8(x) (*((volatile uint8_t *) (x)))
+
+/* Macros used to define a sequence of reserved registers. The start / end */
+/* are byte offsets in the particular register definition, with the "end" */
+/* being the offset of the next un-reserved register. E.g. if offsets */
+/* 0x10 through to 0x1f are reserved, then this reserved area could be */
+/* specified as follows. */
+/* typedef struct */
+/* { */
+/* uint32_t reg1; offset 0x00 */
+/* uint32_t reg2; offset 0x04 */
+/* uint32_t reg3; offset 0x08 */
+/* uint32_t reg4; offset 0x0c */
+/* REG32_RSVD(0x10, 0x20); */
+/* uint32_t reg5; offset 0x20 */
+/* ... */
+/* } EXAMPLE_REG_t; */
+#define REG8_RSVD(start, end) uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
+#define REG16_RSVD(start, end) uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
+#define REG32_RSVD(start, end) uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
+/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the */
+/* flags variable to be declared locally. */
+/* e.g. */
+/* statement1; */
+/* { */
+/* REG_LOCAL_IRQ_SAVE; */
+/* <multiple statements here> */
+/* REG_LOCAL_IRQ_RESTORE; */
+/* } */
+/* statement2; */
+/* */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <mach/hardware.h>
+#include <linux/interrupt.h>
+
+#define REG_LOCAL_IRQ_SAVE HW_DECLARE_SPINLOCK(reg32) \
+ unsigned long flags; HW_IRQ_SAVE(reg32, flags)
+
+#define REG_LOCAL_IRQ_RESTORE HW_IRQ_RESTORE(reg32, flags)
+
+#else
+
+#define REG_LOCAL_IRQ_SAVE
+#define REG_LOCAL_IRQ_RESTORE
+
+#endif
+
+static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *reg &= value;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *reg |= value;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
+ uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *reg = (*reg & mask) | value;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
+{
+ *reg = value;
+}
+
+#endif /* CSP_REG_H */
diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h
new file mode 100644
index 00000000000..b9d7e0732df
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/secHw.h
@@ -0,0 +1,65 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file secHw.h
+*
+* @brief Definitions for accessing low level security features
+*
+*/
+/****************************************************************************/
+#ifndef SECHW_H
+#define SECHW_H
+
+typedef void (*secHw_FUNC_t) (void);
+
+typedef enum {
+ secHw_MODE_SECURE = 0x0, /* Switches processor into secure mode */
+ secHw_MODE_NONSECURE = 0x1 /* Switches processor into non-secure mode */
+} secHw_MODE;
+
+/****************************************************************************/
+/**
+* @brief Requesting to execute the function in secure mode
+*
+* This function requests the given function to run in secure mode
+*
+*/
+/****************************************************************************/
+void secHw_RunSecure(secHw_FUNC_t /* Function to run in secure mode */
+ );
+
+/****************************************************************************/
+/**
+* @brief Sets the mode
+*
+* his function sets the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_SetMode(secHw_MODE /* Processor mode */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get the current mode
+*
+* This function retieves the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_GetMode(secHw_MODE *);
+
+#endif /* SECHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h
new file mode 100644
index 00000000000..3a8718bbf70
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/stdint.h
@@ -0,0 +1,30 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_STDINT_H
+#define CSP_STDINT_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_STDINT_H */
diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h
new file mode 100644
index 00000000000..ad9e4005f14
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/string.h
@@ -0,0 +1,34 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+
+#ifndef CSP_STRING_H
+#define CSP_STRING_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+ #include <linux/string.h>
+#else
+ #include <string.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_STRING_H */
+
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
new file mode 100644
index 00000000000..f1236d00cb9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/tmrHw.h
@@ -0,0 +1,263 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file tmrHw.h
+*
+* @brief API definitions for low level Timer driver
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_H
+#define _TMRHW_H
+
+#include <csp/stdint.h>
+
+typedef uint32_t tmrHw_ID_t; /* Timer ID */
+typedef uint32_t tmrHw_COUNT_t; /* Timer count */
+typedef uint32_t tmrHw_INTERVAL_t; /* Timer interval */
+typedef uint32_t tmrHw_RATE_t; /* Timer event (count/interrupt) rate */
+
+typedef enum {
+ tmrHw_INTERRUPT_STATUS_SET, /* Interrupted */
+ tmrHw_INTERRUPT_STATUS_UNSET /* No Interrupt */
+} tmrHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+ tmrHw_CAPABILITY_CLOCK, /* Clock speed in HHz */
+ tmrHw_CAPABILITY_RESOLUTION /* Timer resolution in bits */
+} tmrHw_CAPABILITY_e;
+
+/****************************************************************************/
+/**
+* @brief Get timer capability
+*
+* This function returns various capabilities/attributes of a timer
+*
+* @return Numeric capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer in terms of timer interrupt rate
+*
+* This function initializes a periodic timer to generate specific number of
+* timer interrupt per second
+*
+* @return On success: Effective timer frequency
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt after
+* certain time interval
+*
+* This function initializes a periodic timer to generate timer interrupt
+* after every time interval in milisecond
+*
+* @return On success: Effective interval set in mili-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt just once
+* after certain time interval
+*
+* This function initializes a periodic timer to generate a single ticks after
+* certain time interval in milisecond
+*
+* @return On success: Effective interval set in mili-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a timer to run as a free running timer
+*
+* This function initializes a timer to run as a free running timer
+*
+* @return Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ uint32_t divider /* [ IN ] Dividing the clock frequency */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Starts a timer
+*
+* This function starts a preconfigured timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Stops a timer
+*
+* This function stops a running timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Gets current timer count
+*
+* This function returns the current timer value
+*
+* @return Current downcounting timer value
+*
+*/
+/****************************************************************************/
+tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Gets timer count rate
+*
+* This function returns the number of counts per second
+*
+* @return Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables timer interrupt
+*
+* This function enables the timer interrupt
+*
+* @return N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Disables timer interrupt
+*
+* This function disable the timer interrupt
+*
+* @return N/A
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the timer interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Gets the interrupt status
+*
+* This function returns timer interrupt status
+*
+* @return Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Indentifies a timer causing interrupt
+*
+* This functions returns a timer causing interrupt
+*
+* @return 0xFFFFFFFF : No timer causing an interrupt
+* ! 0xFFFFFFFF : timer causing an interrupt
+* @note
+* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+* @brief Displays specific timer registers
+*
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+);
+
+/****************************************************************************/
+/**
+* @brief Use a timer to perform a busy wait delay for a number of usecs.
+*
+* @return N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ unsigned long usecs /* [ IN ] usec to delay */
+) __attribute__ ((section(".aramtext")));
+
+#endif /* _TMRHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h
new file mode 100644
index 00000000000..30fa2d54063
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap.h
@@ -0,0 +1,63 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_H
+#define CAP_H
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Public Constants and Types --------------------------------------- */
+typedef enum {
+ CAP_NOT_PRESENT = 0,
+ CAP_PRESENT
+} CAP_RC_T;
+
+typedef enum {
+ CAP_VPM,
+ CAP_ETH_PHY,
+ CAP_ETH_GMII,
+ CAP_ETH_SGMII,
+ CAP_USB,
+ CAP_TSC,
+ CAP_EHSS,
+ CAP_SDIO,
+ CAP_UARTB,
+ CAP_KEYPAD,
+ CAP_CLCD,
+ CAP_GE,
+ CAP_LEDM,
+ CAP_BBL,
+ CAP_VDEC,
+ CAP_PIF,
+ CAP_APM,
+ CAP_SPU,
+ CAP_PKA,
+ CAP_RNG,
+} CAP_CAPABILITY_T;
+
+typedef enum {
+ CAP_LCD_WVGA = 0,
+ CAP_LCD_VGA = 0x1,
+ CAP_LCD_WQVGA = 0x2,
+ CAP_LCD_QVGA = 0x3
+} CAP_LCD_RES_T;
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
+static inline uint32_t cap_getMaxArmSpeedHz(void);
+static inline uint32_t cap_getMaxVpmSpeedHz(void);
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
new file mode 100644
index 00000000000..933ce68ed90
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
@@ -0,0 +1,409 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_INLINE_H
+#define CAP_INLINE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/cap.h>
+#include <cfg_global.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+#define CAP_CONFIG0_VPM_DIS 0x00000001
+#define CAP_CONFIG0_ETH_PHY0_DIS 0x00000002
+#define CAP_CONFIG0_ETH_PHY1_DIS 0x00000004
+#define CAP_CONFIG0_ETH_GMII0_DIS 0x00000008
+#define CAP_CONFIG0_ETH_GMII1_DIS 0x00000010
+#define CAP_CONFIG0_ETH_SGMII0_DIS 0x00000020
+#define CAP_CONFIG0_ETH_SGMII1_DIS 0x00000040
+#define CAP_CONFIG0_USB0_DIS 0x00000080
+#define CAP_CONFIG0_USB1_DIS 0x00000100
+#define CAP_CONFIG0_TSC_DIS 0x00000200
+#define CAP_CONFIG0_EHSS0_DIS 0x00000400
+#define CAP_CONFIG0_EHSS1_DIS 0x00000800
+#define CAP_CONFIG0_SDIO0_DIS 0x00001000
+#define CAP_CONFIG0_SDIO1_DIS 0x00002000
+#define CAP_CONFIG0_UARTB_DIS 0x00004000
+#define CAP_CONFIG0_KEYPAD_DIS 0x00008000
+#define CAP_CONFIG0_CLCD_DIS 0x00010000
+#define CAP_CONFIG0_GE_DIS 0x00020000
+#define CAP_CONFIG0_LEDM_DIS 0x00040000
+#define CAP_CONFIG0_BBL_DIS 0x00080000
+#define CAP_CONFIG0_VDEC_DIS 0x00100000
+#define CAP_CONFIG0_PIF_DIS 0x00200000
+#define CAP_CONFIG0_RESERVED1_DIS 0x00400000
+#define CAP_CONFIG0_RESERVED2_DIS 0x00800000
+
+#define CAP_CONFIG1_APMA_DIS 0x00000001
+#define CAP_CONFIG1_APMB_DIS 0x00000002
+#define CAP_CONFIG1_APMC_DIS 0x00000004
+#define CAP_CONFIG1_CLCD_RES_MASK 0x00000600
+#define CAP_CONFIG1_CLCD_RES_SHIFT 9
+#define CAP_CONFIG1_CLCD_RES_WVGA (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_VGA (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_WQVGA (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_QVGA (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+
+#define CAP_CONFIG2_SPU_DIS 0x00000010
+#define CAP_CONFIG2_PKA_DIS 0x00000020
+#define CAP_CONFIG2_RNG_DIS 0x00000080
+
+#if (CFG_GLOBAL_CHIP == BCM11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == FPGA11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == BCM11109)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11170)
+#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11110)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 2
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_ARM_CLK_HZ 500000000
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_ARM_CLK_HZ 300000000
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define CAP_HW_CFG_ARM_CLK_HZ 666666666
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_VPM_CLK_HZ 333333333
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_VPM_CLK_HZ 200000000
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************
+* cap_isPresent -
+*
+* PURPOSE:
+* Determines if the chip has a certain capability present
+*
+* PARAMETERS:
+* capability - type of capability to determine if present
+*
+* RETURNS:
+* CAP_PRESENT or CAP_NOT_PRESENT
+****************************************************************************/
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
+{
+ CAP_RC_T returnVal = CAP_NOT_PRESENT;
+
+ switch (capability) {
+ case CAP_VPM:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_PHY:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_GMII:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_SGMII:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_USB:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_TSC:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_EHSS:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_SDIO:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_UARTB:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_KEYPAD:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_CLCD:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_GE:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_LEDM:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_BBL:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_VDEC:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_PIF:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_APM:
+ {
+ if ((index == 0)
+ && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 2)
+ && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_SPU:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_PKA:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_RNG:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ default:
+ {
+ }
+ break;
+ }
+ return returnVal;
+}
+
+/****************************************************************************
+* cap_getMaxArmSpeedHz -
+*
+* PURPOSE:
+* Determines the maximum speed of the ARM CPU
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* clock speed in Hz that the ARM processor is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxArmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+ return 500000000;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+ return 300000000;
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+ return 666666666;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+* cap_getMaxVpmSpeedHz -
+*
+* PURPOSE:
+* Determines the maximum speed of the VPM
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* clock speed in Hz that the VPM is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxVpmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+ return 333333333;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+ return 200000000;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+* cap_getMaxLcdRes -
+*
+* PURPOSE:
+* Determines the maximum LCD resolution capabilities
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
+*
+****************************************************************************/
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
+{
+ return (CAP_LCD_RES_T)
+ ((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
+ CAP_CONFIG1_CLCD_RES_SHIFT);
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
new file mode 100644
index 00000000000..70eaea866cf
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -0,0 +1,1123 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_DEF_H
+#define CHIPC_DEF_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+
+/* ---- Public Constants and Types ---------------------------------------- */
+
+/* Set 1 to configure DDR/VPM phase alignment by HW */
+#define chipcHw_DDR_HW_PHASE_ALIGN 0
+#define chipcHw_VPM_HW_PHASE_ALIGN 0
+
+typedef uint32_t chipcHw_freq;
+
+/* Configurable miscellaneous clocks */
+typedef enum {
+ chipcHw_CLOCK_DDR, /* DDR PHY Clock */
+ chipcHw_CLOCK_ARM, /* ARM Clock */
+ chipcHw_CLOCK_ESW, /* Ethernet Switch Clock */
+ chipcHw_CLOCK_VPM, /* VPM Clock */
+ chipcHw_CLOCK_ESW125, /* Ethernet MII Clock */
+ chipcHw_CLOCK_UART, /* UART Clock */
+ chipcHw_CLOCK_SDIO0, /* SDIO 0 Clock */
+ chipcHw_CLOCK_SDIO1, /* SDIO 1 Clock */
+ chipcHw_CLOCK_SPI, /* SPI Clock */
+ chipcHw_CLOCK_ETM, /* ARM ETM Clock */
+
+ chipcHw_CLOCK_BUS, /* BUS Clock */
+ chipcHw_CLOCK_OTP, /* OTP Clock */
+ chipcHw_CLOCK_I2C, /* I2C Host Clock */
+ chipcHw_CLOCK_I2S0, /* I2S 0 Host Clock */
+ chipcHw_CLOCK_RTBUS, /* DDR PHY Configuration Clock */
+ chipcHw_CLOCK_APM100, /* APM100 Clock */
+ chipcHw_CLOCK_TSC, /* Touch screen Clock */
+ chipcHw_CLOCK_LED, /* LED Clock */
+
+ chipcHw_CLOCK_USB, /* USB Clock */
+ chipcHw_CLOCK_LCD, /* LCD CLock */
+ chipcHw_CLOCK_APM, /* APM Clock */
+
+ chipcHw_CLOCK_I2S1, /* I2S 1 Host Clock */
+} chipcHw_CLOCK_e;
+
+/* System booting strap options */
+typedef enum {
+ chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
+ chipcHw_BOOT_DEVICE_SERIAL_FLASH =
+ chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
+ chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
+ chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
+ chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
+ chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
+ chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
+ chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
+} chipcHw_BOOT_DEVICE_e;
+
+/* System booting modes */
+typedef enum {
+ chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
+ chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
+ chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
+ chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
+} chipcHw_BOOT_MODE_e;
+
+/* NAND Flash page size strap options */
+typedef enum {
+ chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
+ chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
+ chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
+ chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
+} chipcHw_NAND_PAGESIZE_e;
+
+/* GPIO Pin function */
+typedef enum {
+ chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
+ chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
+ chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
+ chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
+ chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
+ chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
+ chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
+ chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
+ chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
+ chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
+ chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
+ chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
+ chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
+ chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
+} chipcHw_GPIO_FUNCTION_e;
+
+/* PIN Output slew rate */
+typedef enum {
+ chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
+ chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
+} chipcHw_PIN_SLEW_RATE_e;
+
+/* PIN Current drive strength */
+typedef enum {
+ chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
+ chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
+ chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
+ chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
+ chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
+ chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
+} chipcHw_PIN_CURRENT_STRENGTH_e;
+
+/* PIN Pull up register settings */
+typedef enum {
+ chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
+ chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
+ chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
+} chipcHw_PIN_PULL_e;
+
+/* PIN input type settings */
+typedef enum {
+ chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
+ chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
+} chipcHw_PIN_INPUTTYPE_e;
+
+/* Allow/Disalow the support of spread spectrum */
+typedef enum {
+ chipcHw_SPREAD_SPECTRUM_DISALLOW, /* Spread spectrum support is not allowed */
+ chipcHw_SPREAD_SPECTRUM_ALLOW /* Spread spectrum support is allowed */
+} chipcHw_SPREAD_SPECTRUM_e;
+
+typedef struct {
+ chipcHw_SPREAD_SPECTRUM_e ssSupport; /* Allow/Disalow to support spread spectrum.
+ If supported, call chipcHw_enableSpreadSpectrum ()
+ to activate the spread spectrum with desired spread. */
+ uint32_t pllVcoFreqHz; /* PLL VCO frequency in Hz */
+ uint32_t pll2VcoFreqHz; /* PLL2 VCO frequency in Hz */
+ uint32_t busClockFreqHz; /* Bus clock frequency in Hz */
+ uint32_t armBusRatio; /* ARM clock : Bus clock */
+ uint32_t vpmBusRatio; /* VPM clock : Bus clock */
+ uint32_t ddrBusRatio; /* DDR clock : Bus clock */
+} chipcHw_INIT_PARAM_t;
+
+/* CHIP revision number */
+typedef enum {
+ chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
+ chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
+} chipcHw_REV_NUMBER_e;
+
+typedef enum {
+ chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
+ chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
+ chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
+ chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
+} chipcHw_VPM_HW_PHASE_INTR_e;
+
+typedef enum {
+ chipcHw_DDR_HW_PHASE_MARGIN_STRICT, /* Strict margin for DDR phase align condition */
+ chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for DDR phase align condition */
+ chipcHw_DDR_HW_PHASE_MARGIN_WIDE /* Wider margin for DDR phase align condition */
+} chipcHw_DDR_HW_PHASE_MARGIN_e;
+
+typedef enum {
+ chipcHw_VPM_HW_PHASE_MARGIN_STRICT, /* Strict margin for VPM phase align condition */
+ chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for VPM phase align condition */
+ chipcHw_VPM_HW_PHASE_MARGIN_WIDE /* Wider margin for VPM phase align condition */
+} chipcHw_VPM_HW_PHASE_MARGIN_e;
+
+#define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */
+
+/* Programable pin defines */
+#define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
+ /* GPIO pin 0 - 60 */
+#define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */
+#define chipcHw_PIN_NVI_A (chipcHw_GPIO_COUNT + 1) /* NVI Interface */
+#define chipcHw_PIN_NVI_D (chipcHw_GPIO_COUNT + 2) /* NVI Interface */
+#define chipcHw_PIN_NVI_OEB (chipcHw_GPIO_COUNT + 3) /* NVI Interface */
+#define chipcHw_PIN_NVI_WEB (chipcHw_GPIO_COUNT + 4) /* NVI Interface */
+#define chipcHw_PIN_NVI_CS (chipcHw_GPIO_COUNT + 5) /* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_CSB (chipcHw_GPIO_COUNT + 6) /* NVI Interface */
+#define chipcHw_PIN_NVI_FLASHWP (chipcHw_GPIO_COUNT + 7) /* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_RDYB (chipcHw_GPIO_COUNT + 8) /* NVI Interface */
+#define chipcHw_PIN_CL_DATA_0_17 (chipcHw_GPIO_COUNT + 9) /* LCD Data 0 - 17 */
+#define chipcHw_PIN_CL_DATA_18_20 (chipcHw_GPIO_COUNT + 10) /* LCD Data 18 - 20 */
+#define chipcHw_PIN_CL_DATA_21_23 (chipcHw_GPIO_COUNT + 11) /* LCD Data 21 - 23 */
+#define chipcHw_PIN_CL_POWER (chipcHw_GPIO_COUNT + 12) /* LCD Power */
+#define chipcHw_PIN_CL_ACK (chipcHw_GPIO_COUNT + 13) /* LCD Ack */
+#define chipcHw_PIN_CL_FP (chipcHw_GPIO_COUNT + 14) /* LCD FP */
+#define chipcHw_PIN_CL_LP (chipcHw_GPIO_COUNT + 15) /* LCD LP */
+#define chipcHw_PIN_UARTRXD (chipcHw_GPIO_COUNT + 16) /* UART Receive */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************/
+/**
+* @brief Initializes the clock module
+*
+*/
+/****************************************************************************/
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables the PLL1
+*
+* This function enables the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, /* [ IN ] VCO frequency in Hz */
+ chipcHw_SPREAD_SPECTRUM_e ssSupport /* [ IN ] SS status */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables the PLL2
+*
+* This function enables the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz /* [ IN ] VCO frequency in Hz */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void);
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in KHz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */
+ uint32_t freq /* [ IN ] Clock frequency in Hz */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Set VPM clock in sync with BUS clock
+*
+* This function does the phase adjustment between VPM and BUS clock
+*
+* @return >= 0 : On success ( # of adjustment required )
+* -1 : On failure
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void);
+
+/****************************************************************************/
+/**
+* @brief Enables core a clock of a certain device
+*
+* This function enables a core clock
+*
+* @return void
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disabled a core clock of a certain device
+*
+* This function disables a core clock
+*
+* @return void
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Enables bypass clock of a certain device
+*
+* This function enables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disabled bypass clock of a certain device
+*
+* This function disables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get Numeric Chip ID
+*
+* This function returns Chip ID that includes the revison number
+*
+* @return Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void);
+
+/****************************************************************************/
+/**
+* @brief Get Chip Product ID
+*
+* This function returns Chip Product ID
+*
+* @return Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void);
+
+/****************************************************************************/
+/**
+* @brief Get revision number
+*
+* This function returns revision number of the chip
+*
+* @return Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
+
+/****************************************************************************/
+/**
+* @brief Enables bus interface clock
+*
+* Enables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disables bus interface clock
+*
+* Disables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Enables various audio channels
+*
+* Enables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disables various audio channels
+*
+* Disables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Soft resets devices
+*
+* Soft resets various devices
+*
+* @return void
+*
+* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+static inline void chipcHw_softResetDisable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+static inline void chipcHw_softResetEnable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configures misc CHIP functionality
+*
+* Configures CHIP functionality
+*
+* @return void
+*
+* @note use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+static inline void chipcHw_miscControlDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+static inline void chipcHw_miscControlEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set OTP options
+*
+* Set OTP options
+*
+* @return void
+*
+* @note use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get sticky bits
+*
+* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void);
+
+/****************************************************************************/
+/**
+* @brief Set sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Clear sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get software override strap options
+*
+* Retrieves software override strap options
+*
+* @return Software override strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Set software override strap options
+*
+* set software override strap options
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
+
+/****************************************************************************/
+/**
+* @brief Get pin strap options
+*
+* Retrieves pin strap options
+*
+* @return Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Get valid pin strap options
+*
+* Retrieves valid pin strap options
+*
+* @return valid Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Initialize valid pin strap options
+*
+* Retrieves valid pin strap options by copying HW strap options to soft register
+* (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Get status (enabled/disabled) of bus interface clock
+*
+* This function returns the status of devices' bus interface clock
+*
+* @return Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get boot device
+*
+* This function returns the device type used in booting the system
+*
+* @return Boot device of type chipcHw_BOOT_DEVICE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
+
+/****************************************************************************/
+/**
+* @brief Get boot mode
+*
+* This function returns the way the system was booted
+*
+* @return Boot mode of type chipcHw_BOOT_MODE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash page size
+*
+* This function returns the NAND device page size
+*
+* @return Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash address cycle configuration
+*
+* This function returns the NAND flash address cycle configuration
+*
+* @return 0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void);
+
+/****************************************************************************/
+/**
+* @brief Activates PIF interface
+*
+* This function activates PIF interface by taking control of LCD pins
+*
+* @note
+* When activated, LCD pins will be defined as follows for PIF operation
+*
+* CLD[17:0] = pif_data[17:0]
+* CLD[23:18] = pif_address[5:0]
+* CLPOWER = pif_wr_str
+* CLCP = pif_rd_str
+* CLAC = pif_hat1
+* CLFP = pif_hrdy1
+* CLLP = pif_hat2
+* GPIO[42] = pif_hrdy2
+*
+* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Activates LCD interface
+*
+* This function activates LCD interface
+*
+* @note
+* When activated, LCD pins will be defined as follows
+*
+* CLD[17:0] = LCD data
+* CLD[23:18] = LCD data
+* CLPOWER = LCD power
+* CLCP =
+* CLAC = LCD ack
+* CLFP =
+* CLLP =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Deactivates PIF/LCD interface
+*
+* This function deactivates PIF/LCD interface
+*
+* @note
+* When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin /* GPIO Pin number */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin, /* GPIO Pin number */
+ chipcHw_GPIO_FUNCTION_e func /* Configuration function */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin slew rate
+*
+* This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_SLEW_RATE_e slewRate /* Pin slew rate */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin output drive current
+*
+* This function sets output drive current of individual pin
+*
+* Note: Avoid the use of the word 'current' since linux headers define this
+* to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_CURRENT_STRENGTH_e curr /* Pin current rating */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin pullup register
+*
+* This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_PULL_e pullup /* Pullup register settings */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin input type
+*
+* This function sets input type of individual Pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_INPUTTYPE_e inputType /* Pin input type */
+ );
+
+/****************************************************************************/
+/**
+* @brief Retrieves a string representation of the mux setting for a pin.
+*
+* @return Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin);
+
+/****************************************************************************/
+/** @brief issue warmReset
+ */
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask);
+
+/****************************************************************************/
+/** @brief clock reconfigure
+ */
+/****************************************************************************/
+void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
+ uint32_t ddrRatio);
+
+/****************************************************************************/
+/**
+* @brief Enable Spread Spectrum
+*
+* @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**
+* @brief Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void);
+
+/****************************************************************************/
+/** @brief Checks if software strap is enabled
+ *
+ * @return 1 : When enable
+ * 0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void);
+
+/****************************************************************************/
+/** @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void);
+
+/****************************************************************************/
+/** @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void);
+
+/****************************************************************************/
+/** @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void);
+
+/****************************************************************************/
+/** @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void);
+
+/****************************************************************************/
+/** @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void);
+
+/****************************************************************************/
+/** @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val);
+
+/****************************************************************************/
+/** @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val);
+
+/****************************************************************************/
+/** @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void);
+
+/****************************************************************************/
+/** @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void);
+
+/****************************************************************************/
+/**
+* @brief Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Set VPM SW phase alignment interrupt mode
+*
+* This function sets VPM phase alignment interrupt
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin /* Margin alinging DDR phase */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin /* Margin alinging VPM phase */
+ );
+
+/****************************************************************************/
+/**
+* @brief Checks DDR phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+* @brief Checks VPM phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void);
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void);
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */
+ );
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */
+ );
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
+
+/****************************************************************************/
+/**
+* @brief Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#endif /* CHIPC_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
new file mode 100644
index 00000000000..c78833acb37
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -0,0 +1,1673 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_INLINE_H
+#define CHIPC_INLINE_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_def.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+typedef enum {
+ chipcHw_OPTYPE_BYPASS, /* Bypass operation */
+ chipcHw_OPTYPE_OUTPUT /* Output operation */
+} chipcHw_OPTYPE_e;
+
+/* ---- Public Constants and Types ---------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------- */
+/* ---- Public Function Prototypes ---------------------------------------- */
+/* ---- Private Function Prototypes --------------------------------------- */
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+ chipcHw_OPTYPE_e type, int mode);
+
+/****************************************************************************/
+/**
+* @brief Get Numeric Chip ID
+*
+* This function returns Chip ID that includes the revison number
+*
+* @return Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void)
+{
+ return pChipcHw->ChipId;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable Spread Spectrum
+*
+* @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void)
+{
+ if ((pChipcHw->
+ PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
+ (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+ (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
+ ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
+ ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void)
+{
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get Chip Product ID
+*
+* This function returns Chip Product ID
+*
+* @return Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void)
+{
+ return (pChipcHw->
+ ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+ chipcHw_REG_CHIPID_BASE_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get revision number
+*
+* This function returns revision number of the chip
+*
+* @return Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
+{
+ return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables bus interface clock
+*
+* Enables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX for mask
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->BusIntfClock, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Disables bus interface clock
+*
+* Disables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Get status (enabled/disabled) of bus interface clock
+*
+* This function returns the status of devices' bus interface clock
+*
+* @return Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
+{
+ return pChipcHw->BusIntfClock;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables various audio channels
+*
+* Enables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->AudioEnable, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Disables various audio channels
+*
+* Disables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Soft resets devices
+*
+* Soft resets various devices
+*
+* @return void
+*
+* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask)
+{
+ chipcHw_softResetEnable(mask);
+ chipcHw_softResetDisable(mask);
+}
+
+static inline void chipcHw_softResetDisable(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+ /* Deassert module soft reset */
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->SoftReset1 ^= ctrl1;
+ pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void chipcHw_softResetEnable(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+ uint32_t unhold = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->SoftReset1 |= ctrl1;
+ /* Mask out unhold request bits */
+ pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+
+ /* Process unhold requests */
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
+ unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
+ }
+
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
+ unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
+ }
+
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
+ unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
+ }
+
+ if (unhold) {
+ /* Make sure unhold request is effective */
+ pChipcHw->SoftReset1 &= ~unhold;
+ }
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Configures misc CHIP functionality
+*
+* Configures CHIP functionality
+*
+* @return void
+*
+* @note use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask)
+{
+ reg32_write(&pChipcHw->MiscCtrl, mask);
+}
+
+static inline void chipcHw_miscControlDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
+}
+
+static inline void chipcHw_miscControlEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Set OTP options
+*
+* Set OTP options
+*
+* @return void
+*
+* @note use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+ reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
+ reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
+}
+
+/****************************************************************************/
+/**
+* @brief Get sticky bits
+*
+* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void)
+{
+ return pChipcHw->Sticky;
+}
+
+/****************************************************************************/
+/**
+* @brief Set sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask)
+{
+ uint32_t bits = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ if (mask & chipcHw_REG_STICKY_POR_BROM) {
+ bits |= chipcHw_REG_STICKY_POR_BROM;
+ } else {
+ uint32_t sticky;
+ sticky = pChipcHw->Sticky;
+
+ if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+ && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
+ bits |= chipcHw_REG_STICKY_BOOT_DONE;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_1;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_2;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_3;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_4;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_5;
+ }
+ }
+ pChipcHw->Sticky = bits;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask)
+{
+ uint32_t bits = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ if (mask &
+ (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
+ chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
+ chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
+ uint32_t sticky = pChipcHw->Sticky;
+
+ if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+ && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
+ bits = chipcHw_REG_STICKY_BOOT_DONE;
+ mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_1;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_1;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_2;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_2;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_3;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_3;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_4;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_4;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_5;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_5;
+ }
+ }
+ pChipcHw->Sticky = bits | mask;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get software strap value
+*
+* Retrieves software strap value
+*
+* @return Software strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void)
+{
+ return pChipcHw->SoftStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Set software override strap options
+*
+* set software override strap options
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
+{
+ reg32_write(&pChipcHw->SoftStraps, strapOptions);
+}
+
+/****************************************************************************/
+/**
+* @brief Get Pin Strap Options
+*
+* This function returns the raw boot strap options
+*
+* @return strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void)
+{
+ return pChipcHw->PinStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Get Valid Strap Options
+*
+* This function returns the valid raw boot strap options
+*
+* @return strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void)
+{
+ uint32_t softStraps;
+
+ /*
+ ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
+ ** which copies HW straps to soft straps if there is no override
+ */
+ softStraps = chipcHw_getSoftStraps();
+
+ return softStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Initialize valid pin strap options
+*
+* Retrieves valid pin strap options by copying HW strap options to soft register
+* (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void)
+{
+ uint32_t softStraps;
+
+ REG_LOCAL_IRQ_SAVE;
+ softStraps = chipcHw_getSoftStraps();
+
+ if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
+ /* Copy HW straps to software straps */
+ chipcHw_setSoftStraps(chipcHw_getPinStraps());
+ }
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get boot device
+*
+* This function returns the device type used in booting the system
+*
+* @return Boot device of type chipcHw_BOOT_DEVICE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get boot mode
+*
+* This function returns the way the system was booted
+*
+* @return Boot mode of type chipcHw_BOOT_MODE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash page size
+*
+* This function returns the NAND device page size
+*
+* @return Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash address cycle configuration
+*
+* This function returns the NAND flash address cycle configuration
+*
+* @return 0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void)
+{
+ if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Activates PIF interface
+*
+* This function activates PIF interface by taking control of LCD pins
+*
+* @note
+* When activated, LCD pins will be defined as follows for PIF operation
+*
+* CLD[17:0] = pif_data[17:0]
+* CLD[23:18] = pif_address[5:0]
+* CLPOWER = pif_wr_str
+* CLCP = pif_rd_str
+* CLAC = pif_hat1
+* CLFP = pif_hrdy1
+* CLLP = pif_hat2
+* GPIO[42] = pif_hrdy2
+*
+* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+* @brief Activates LCD interface
+*
+* This function activates LCD interface
+*
+* @note
+* When activated, LCD pins will be defined as follows
+*
+* CLD[17:0] = LCD data
+* CLD[23:18] = LCD data
+* CLPOWER = LCD power
+* CLCP =
+* CLAC = LCD ack
+* CLFP =
+* CLLP =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+* @brief Deactivates PIF/LCD interface
+*
+* This function deactivates PIF/LCD interface
+*
+* @note
+* When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, 0);
+}
+
+/****************************************************************************/
+/**
+* @brief Select GE2
+*
+* This function select GE2 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE2(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+* @brief Select GE3
+*
+* This function select GE3 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE3(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+* @brief Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
+{
+ return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+ (chipcHw_REG_GPIO_MUX_MASK <<
+ chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+ chipcHw_REG_GPIO_MUX_POSITION(pin);
+}
+
+/****************************************************************************/
+/**
+* @brief Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,
+ chipcHw_GPIO_FUNCTION_e func)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
+ ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
+ func << chipcHw_REG_GPIO_MUX_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin slew rate
+*
+* This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,
+ chipcHw_PIN_SLEW_RATE_e slewRate)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
+ ~(chipcHw_REG_SLEW_RATE_MASK <<
+ chipcHw_REG_SLEW_RATE_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
+ (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin output drive current
+*
+* This function sets output drive current of individual pin
+*
+* Note: Avoid the use of the word 'current' since linux headers define this
+* to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
+ chipcHw_PIN_CURRENT_STRENGTH_e
+ curr)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
+ ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
+ (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin pullup register
+*
+* This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
+ ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
+ (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin input type
+*
+* This function sets input type of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,
+ chipcHw_PIN_INPUTTYPE_e inputType)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
+ ~(chipcHw_REG_INPUTTYPE_MASK <<
+ chipcHw_REG_INPUTTYPE_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
+ (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Power up the USB PHY
+*
+* This function powers up the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerUpUsbPhy(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_POWERON);
+}
+
+/****************************************************************************/
+/**
+* @brief Power down the USB PHY
+*
+* This function powers down the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerDownUsbPhy(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_POWEROFF);
+}
+
+/****************************************************************************/
+/**
+* @brief Set the 2nd USB as host
+*
+* This function sets the 2nd USB as host
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbHost(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
+}
+
+/****************************************************************************/
+/**
+* @brief Set the 2nd USB as device
+*
+* This function sets the 2nd USB as device
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbDevice(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
+}
+
+/****************************************************************************/
+/**
+* @brief Lower layer funtion to enable/disable a clock of a certain device
+*
+* This function enables/disables a core clock
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+ chipcHw_OPTYPE_e type, int mode)
+{
+ volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+ volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+
+ switch (clock) {
+ case chipcHw_CLOCK_DDR:
+ pPLLReg = &pChipcHw->DDRClock;
+ break;
+ case chipcHw_CLOCK_ARM:
+ pPLLReg = &pChipcHw->ARMClock;
+ break;
+ case chipcHw_CLOCK_ESW:
+ pPLLReg = &pChipcHw->ESWClock;
+ break;
+ case chipcHw_CLOCK_VPM:
+ pPLLReg = &pChipcHw->VPMClock;
+ break;
+ case chipcHw_CLOCK_ESW125:
+ pPLLReg = &pChipcHw->ESW125Clock;
+ break;
+ case chipcHw_CLOCK_UART:
+ pPLLReg = &pChipcHw->UARTClock;
+ break;
+ case chipcHw_CLOCK_SDIO0:
+ pPLLReg = &pChipcHw->SDIO0Clock;
+ break;
+ case chipcHw_CLOCK_SDIO1:
+ pPLLReg = &pChipcHw->SDIO1Clock;
+ break;
+ case chipcHw_CLOCK_SPI:
+ pPLLReg = &pChipcHw->SPIClock;
+ break;
+ case chipcHw_CLOCK_ETM:
+ pPLLReg = &pChipcHw->ETMClock;
+ break;
+ case chipcHw_CLOCK_USB:
+ pPLLReg = &pChipcHw->USBClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_LCD:
+ pPLLReg = &pChipcHw->LCDClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_APM:
+ pPLLReg = &pChipcHw->APMClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_BUS:
+ pClockCtrl = &pChipcHw->ACLKClock;
+ break;
+ case chipcHw_CLOCK_OTP:
+ pClockCtrl = &pChipcHw->OTPClock;
+ break;
+ case chipcHw_CLOCK_I2C:
+ pClockCtrl = &pChipcHw->I2CClock;
+ break;
+ case chipcHw_CLOCK_I2S0:
+ pClockCtrl = &pChipcHw->I2S0Clock;
+ break;
+ case chipcHw_CLOCK_RTBUS:
+ pClockCtrl = &pChipcHw->RTBUSClock;
+ break;
+ case chipcHw_CLOCK_APM100:
+ pClockCtrl = &pChipcHw->APM100Clock;
+ break;
+ case chipcHw_CLOCK_TSC:
+ pClockCtrl = &pChipcHw->TSCClock;
+ break;
+ case chipcHw_CLOCK_LED:
+ pClockCtrl = &pChipcHw->LEDClock;
+ break;
+ case chipcHw_CLOCK_I2S1:
+ pClockCtrl = &pChipcHw->I2S1Clock;
+ break;
+ }
+
+ if (pPLLReg) {
+ switch (type) {
+ case chipcHw_OPTYPE_OUTPUT:
+ /* PLL clock output enable/disable */
+ if (mode) {
+ if (clock == chipcHw_CLOCK_DDR) {
+ /* DDR clock enable is inverted */
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ }
+ } else {
+ if (clock == chipcHw_CLOCK_DDR) {
+ /* DDR clock disable is inverted */
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ }
+ }
+ break;
+ case chipcHw_OPTYPE_BYPASS:
+ /* PLL clock bypass enable/disable */
+ if (mode) {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ } else {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ }
+ break;
+ }
+ } else if (pClockCtrl) {
+ switch (type) {
+ case chipcHw_OPTYPE_OUTPUT:
+ if (mode) {
+ reg32_modify_or(pClockCtrl,
+ chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_and(pClockCtrl,
+ ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+ }
+ break;
+ case chipcHw_OPTYPE_BYPASS:
+ if (mode) {
+ reg32_modify_or(pClockCtrl,
+ chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+ } else {
+ reg32_modify_and(pClockCtrl,
+ ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+ }
+ break;
+ }
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Disables a core clock of a certain device
+*
+* This function disables a core clock
+*
+* @note no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
+{
+
+ /* Disable output of the clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
+}
+
+/****************************************************************************/
+/**
+* @brief Enable a core clock of a certain device
+*
+* This function enables a core clock
+*
+* @note no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
+{
+
+ /* Enable output of the clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
+}
+
+/****************************************************************************/
+/**
+* @brief Enables bypass clock of a certain device
+*
+* This function enables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
+{
+ /* Enable bypass clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
+}
+
+/****************************************************************************/
+/**
+* @brief Disabled bypass clock of a certain device
+*
+* This function disables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
+{
+ /* Disable bypass clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
+
+}
+
+/****************************************************************************/
+/** @brief Checks if software strap is enabled
+ *
+ * @return 1 : When enable
+ * 0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void)
+{
+ return pChipcHw->SoftStraps & 0x00000001;
+}
+
+/****************************************************************************/
+/** @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void)
+{
+ reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
+}
+
+/****************************************************************************/
+/** @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void)
+{
+ reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
+}
+
+/****************************************************************************/
+/** @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void)
+{
+ reg32_modify_or(&pChipcHw->PLLConfig,
+ chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void)
+{
+ reg32_modify_or(&pChipcHw->PLLConfig2,
+ chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void)
+{
+ reg32_modify_and(&pChipcHw->PLLConfig,
+ ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void)
+{
+ reg32_modify_and(&pChipcHw->PLLConfig2,
+ ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void)
+{
+ return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/** @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void)
+{
+ return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/** @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+ pChipcHw->PLLConfig |=
+ (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/** @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val)
+{
+
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+ pChipcHw->PLLConfig2 |=
+ (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/** @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void)
+{
+ return (uint8_t) ((pChipcHw->
+ PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/** @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void)
+{
+ return (uint8_t) ((pChipcHw->
+ PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set VPM SW phase alignment interrupt mode
+*
+* This function sets VPM phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
+{
+ REG_LOCAL_IRQ_SAVE;
+ if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+ } else {
+ pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+ }
+ pChipcHw->VPMPhaseCtrl2 =
+ (pChipcHw->
+ VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
+ chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
+{
+ uint32_t ge = 0;
+ uint32_t le = 0;
+
+ switch (margin) {
+ case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
+ ge = 0x0F;
+ le = 0x0F;
+ break;
+ case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
+ ge = 0x03;
+ le = 0x3F;
+ break;
+ case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
+ ge = 0x01;
+ le = 0x7F;
+ break;
+ }
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->DDRPhaseCtrl1 &=
+ ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
+ chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+ || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
+ chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+ pChipcHw->DDRPhaseCtrl1 |=
+ ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+ || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
+{
+ uint32_t ge = 0;
+ uint32_t le = 0;
+
+ switch (margin) {
+ case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
+ ge = 0x0F;
+ le = 0x0F;
+ break;
+ case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
+ ge = 0x03;
+ le = 0x3F;
+ break;
+ case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
+ ge = 0x01;
+ le = 0x7F;
+ break;
+ }
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->VPMPhaseCtrl1 &=
+ ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
+ chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+ || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
+ chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+ pChipcHw->VPMPhaseCtrl1 |=
+ ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+ || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Checks DDR phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Checks VPM phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+ chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+ chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+ chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+ chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl2 &=
+ ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
+ chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
+ pChipcHw->DDRPhaseCtrl2 |=
+ (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
+ chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl2 &=
+ ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
+ chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
+ pChipcHw->VPMPhaseCtrl2 |=
+ (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
+ chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ /* Clear timeout interrupt service bit */
+ pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
+ pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ /* Clear timeout interrupt service bit */
+ pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
+ pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
+ /* Enable timeout interrupt */
+ pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
+ /* Enable timeout interrupt */
+ pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+#endif /* CHIPC_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
new file mode 100644
index 00000000000..b162448f613
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
@@ -0,0 +1,530 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file chipcHw_reg.h
+*
+* @brief Definitions for low level chip control registers
+*
+*/
+/****************************************************************************/
+#ifndef CHIPCHW_REG_H
+#define CHIPCHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <csp/reg.h>
+#include <mach/csp/ddrcReg.h>
+
+#define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC
+
+typedef struct {
+ uint32_t ChipId; /* Chip ID */
+ uint32_t DDRClock; /* PLL1 Channel 1 for DDR clock */
+ uint32_t ARMClock; /* PLL1 Channel 2 for ARM clock */
+ uint32_t ESWClock; /* PLL1 Channel 3 for ESW system clock */
+ uint32_t VPMClock; /* PLL1 Channel 4 for VPM clock */
+ uint32_t ESW125Clock; /* PLL1 Channel 5 for ESW 125MHz clock */
+ uint32_t UARTClock; /* PLL1 Channel 6 for UART clock */
+ uint32_t SDIO0Clock; /* PLL1 Channel 7 for SDIO 0 clock */
+ uint32_t SDIO1Clock; /* PLL1 Channel 8 for SDIO 1 clock */
+ uint32_t SPIClock; /* PLL1 Channel 9 for SPI master Clock */
+ uint32_t ETMClock; /* PLL1 Channel 10 for ARM ETM Clock */
+
+ uint32_t ACLKClock; /* ACLK Clock (Divider) */
+ uint32_t OTPClock; /* OTP Clock (Divider) */
+ uint32_t I2CClock; /* I2C Clock (CK_13m) (Divider) */
+ uint32_t I2S0Clock; /* I2S0 Clock (Divider) */
+ uint32_t RTBUSClock; /* RTBUS (DDR PHY Config.) Clock (Divider) */
+ uint32_t pad1;
+ uint32_t APM100Clock; /* APM 100MHz CLK Clock (Divider) */
+ uint32_t TSCClock; /* TSC Clock (Divider) */
+ uint32_t LEDClock; /* LED Clock (Divider) */
+
+ uint32_t USBClock; /* PLL2 Channel 1 for USB clock */
+ uint32_t LCDClock; /* PLL2 Channel 2 for LCD clock */
+ uint32_t APMClock; /* PLL2 Channel 3 for APM 200 MHz clock */
+
+ uint32_t BusIntfClock; /* Bus interface clock */
+
+ uint32_t PLLStatus; /* PLL status register (PLL1) */
+ uint32_t PLLConfig; /* PLL configuration register (PLL1) */
+ uint32_t PLLPreDivider; /* PLL pre-divider control register (PLL1) */
+ uint32_t PLLDivider; /* PLL divider control register (PLL1) */
+ uint32_t PLLControl1; /* PLL analog control register #1 (PLL1) */
+ uint32_t PLLControl2; /* PLL analog control register #2 (PLL1) */
+
+ uint32_t I2S1Clock; /* I2S1 Clock */
+ uint32_t AudioEnable; /* Enable/ disable audio channel */
+ uint32_t SoftReset1; /* Reset blocks */
+ uint32_t SoftReset2; /* Reset blocks */
+ uint32_t Spare1; /* Phase align interrupts */
+ uint32_t Sticky; /* Sticky bits */
+ uint32_t MiscCtrl; /* Misc. control */
+ uint32_t pad3[3];
+
+ uint32_t PLLStatus2; /* PLL status register (PLL2) */
+ uint32_t PLLConfig2; /* PLL configuration register (PLL2) */
+ uint32_t PLLPreDivider2; /* PLL pre-divider control register (PLL2) */
+ uint32_t PLLDivider2; /* PLL divider control register (PLL2) */
+ uint32_t PLLControl12; /* PLL analog control register #1 (PLL2) */
+ uint32_t PLLControl22; /* PLL analog control register #2 (PLL2) */
+
+ uint32_t DDRPhaseCtrl1; /* DDR Clock Phase Alignment control1 */
+ uint32_t VPMPhaseCtrl1; /* VPM Clock Phase Alignment control1 */
+ uint32_t PhaseAlignStatus; /* DDR/VPM Clock Phase Alignment Status */
+ uint32_t PhaseCtrlStatus; /* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
+ uint32_t DDRPhaseCtrl2; /* DDR Clock Phase Alignment control2 */
+ uint32_t VPMPhaseCtrl2; /* VPM Clock Phase Alignment control2 */
+ uint32_t pad4[9];
+
+ uint32_t SoftOTP1; /* Software OTP control */
+ uint32_t SoftOTP2; /* Software OTP control */
+ uint32_t SoftStraps; /* Software strap */
+ uint32_t PinStraps; /* Pin Straps */
+ uint32_t DiffOscCtrl; /* Diff oscillator control */
+ uint32_t DiagsCtrl; /* Diagnostic control */
+ uint32_t DiagsOutputCtrl; /* Diagnostic output enable */
+ uint32_t DiagsReadBackCtrl; /* Diagnostic read back control */
+
+ uint32_t LcdPifMode; /* LCD/PIF Pin Sharing MUX Mode */
+
+ uint32_t GpioMux_0_7; /* Pin Sharing MUX0 Control */
+ uint32_t GpioMux_8_15; /* Pin Sharing MUX1 Control */
+ uint32_t GpioMux_16_23; /* Pin Sharing MUX2 Control */
+ uint32_t GpioMux_24_31; /* Pin Sharing MUX3 Control */
+ uint32_t GpioMux_32_39; /* Pin Sharing MUX4 Control */
+ uint32_t GpioMux_40_47; /* Pin Sharing MUX5 Control */
+ uint32_t GpioMux_48_55; /* Pin Sharing MUX6 Control */
+ uint32_t GpioMux_56_63; /* Pin Sharing MUX7 Control */
+
+ uint32_t GpioSR_0_7; /* Slew rate for GPIO 0 - 7 */
+ uint32_t GpioSR_8_15; /* Slew rate for GPIO 8 - 15 */
+ uint32_t GpioSR_16_23; /* Slew rate for GPIO 16 - 23 */
+ uint32_t GpioSR_24_31; /* Slew rate for GPIO 24 - 31 */
+ uint32_t GpioSR_32_39; /* Slew rate for GPIO 32 - 39 */
+ uint32_t GpioSR_40_47; /* Slew rate for GPIO 40 - 47 */
+ uint32_t GpioSR_48_55; /* Slew rate for GPIO 48 - 55 */
+ uint32_t GpioSR_56_63; /* Slew rate for GPIO 56 - 63 */
+ uint32_t MiscSR_0_7; /* Slew rate for MISC 0 - 7 */
+ uint32_t MiscSR_8_15; /* Slew rate for MISC 8 - 15 */
+
+ uint32_t GpioPull_0_15; /* Pull up registers for GPIO 0 - 15 */
+ uint32_t GpioPull_16_31; /* Pull up registers for GPIO 16 - 31 */
+ uint32_t GpioPull_32_47; /* Pull up registers for GPIO 32 - 47 */
+ uint32_t GpioPull_48_63; /* Pull up registers for GPIO 48 - 63 */
+ uint32_t MiscPull_0_15; /* Pull up registers for MISC 0 - 15 */
+
+ uint32_t GpioInput_0_31; /* Input type for GPIO 0 - 31 */
+ uint32_t GpioInput_32_63; /* Input type for GPIO 32 - 63 */
+ uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */
+} chipcHw_REG_t;
+
+#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+
+#define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000
+#define chipcHw_REG_CHIPID_BASE_SHIFT 12
+#define chipcHw_REG_CHIPID_REV_MASK 0x00000FFF
+#define chipcHw_REG_REV_A0 0xA00
+#define chipcHw_REG_REV_B0 0x0B0
+
+#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE 0x80000000 /* Allow controlling PLL registers */
+#define chipcHw_REG_PLL_STATUS_LOCKED 0x00000001 /* PLL is settled */
+#define chipcHw_REG_PLL_CONFIG_D_RESET 0x00000008 /* Digital reset */
+#define chipcHw_REG_PLL_CONFIG_A_RESET 0x00000004 /* Analog reset */
+#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE 0x00000020 /* Bypass enable */
+#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE 0x00000010 /* Output enable */
+#define chipcHw_REG_PLL_CONFIG_POWER_DOWN 0x00000001 /* Power down */
+#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ 1600000000 /* 1.6GHz VCO split frequency */
+#define chipcHw_REG_PLL_CONFIG_VCO_800_1600 0x00000000 /* VCO range 800-1600 MHz */
+#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200 0x00000080 /* VCO range 1601-3200 MHz */
+#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE 0x00010000 /* PLL test output enable */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK 0x003E0000 /* Mask to set test values */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT 17
+
+#define chipcHw_REG_PLL_CLOCK_PHASE_COMP 0x00800000 /* Phase comparator output */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK 0x00300000 /* Clock to bus ratio mask */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT 20 /* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_POWER_DOWN 0x00080000 /* PLL channel power down */
+#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO 0x00040000 /* Use GPIO as source */
+#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT 0x00020000 /* Select bypass clock */
+#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE 0x00010000 /* Clock gated ON */
+#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE 0x00008000 /* Clock phase update enable */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT 8 /* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK 0x00003F00 /* Phase control mask */
+#define chipcHw_REG_PLL_CLOCK_MDIV_MASK 0x000000FF /* Clock post divider mask
+
+ 00000000 = divide-by-256
+ 00000001 = divide-by-1
+ 00000010 = divide-by-2
+ 00000011 = divide-by-3
+ 00000100 = divide-by-4
+ 00000101 = divide-by-5
+ 00000110 = divide-by-6
+ .
+ .
+ 11111011 = divide-by-251
+ 11111100 = divide-by-252
+ 11111101 = divide-by-253
+ 11111110 = divide-by-254
+ */
+
+#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER 0x00040000 /* NON-PLL clock source select */
+#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT 0x00020000 /* NON-PLL clock bypass enable */
+#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE 0x00010000 /* NON-PLL clock output enable */
+#define chipcHw_REG_DIV_CLOCK_DIV_MASK 0x000000FF /* NON-PLL clock post-divide mask */
+#define chipcHw_REG_DIV_CLOCK_DIV_256 0x00000000 /* NON-PLL clock post-divide by 256 */
+
+#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT 0
+#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT 4
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT 8
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK 0x0001FF00
+#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN 0x02000000
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK 0x00700000 /* Divider mask */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER 0x00000000 /* Integer-N Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT 0x00100000 /* MASH Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT 0x00200000 /* MFB Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 0x00300000 /* MASH Sigma-Delta Modulator 1/8 Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8 0x00400000 /* MFB Sigma-Delta Modulator 1/8 Mode */
+
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco) ((vco) / chipcHw_XTAL_FREQ_Hz)
+#define chipcHw_REG_PLL_PREDIVIDER_P1 1
+#define chipcHw_REG_PLL_PREDIVIDER_P2 1
+
+#define chipcHw_REG_PLL_DIVIDER_M1DIV 0x03000000
+#define chipcHw_REG_PLL_DIVIDER_FRAC 0x00FFFFFF /* Fractional divider */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS (0x00FFFFFF) /* To attain spread with max frequency */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f 0 /* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
+ chipcHw_REG_PLL_DIVIDER_FRAC
+ = 0, when SS is disable
+ */
+
+#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz) ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
+
+#define chipcHw_REG_ACLKClock_CLK_DIV_MASK 0x3
+
+/* System booting strap options */
+#define chipcHw_STRAPS_SOFT_OVERRIDE 0x00000001 /* Software Strap Override */
+
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8 0x00000000 /* 8 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16 0x00000002 /* 16 bit NOR FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH 0x00000004 /* Serial FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16 0x00000006 /* 16 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_UART 0x00000008 /* UART Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_MASK 0x0000000E /* Mask */
+
+/* System boot option */
+#define chipcHw_STRAPS_BOOT_OPTION_BROM 0x00000000 /* Boot from Boot ROM */
+#define chipcHw_STRAPS_BOOT_OPTION_ARAM 0x00000020 /* Boot from ARAM */
+#define chipcHw_STRAPS_BOOT_OPTION_NOR 0x00000030 /* Boot from NOR flash */
+
+/* NAND Flash page size strap options */
+#define chipcHw_STRAPS_NAND_PAGESIZE_512 0x00000000 /* NAND FLASH page size of 512 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_2048 0x00000040 /* NAND FLASH page size of 2048 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_4096 0x00000080 /* NAND FLASH page size of 4096 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_EXT 0x000000C0 /* NAND FLASH page of extened size */
+#define chipcHw_STRAPS_NAND_PAGESIZE_MASK 0x000000C0 /* Mask */
+
+#define chipcHw_STRAPS_NAND_EXTRA_CYCLE 0x00000400 /* NAND FLASH address cycle configuration */
+#define chipcHw_STRAPS_REBOOT_TO_UART 0x00000800 /* Reboot to UART on error */
+
+/* Secure boot mode strap options */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL 0x00000000 /* Normal Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_SW 0x00000100 /* Software debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT 0x00000200 /* Boot rom debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET 0x00000300 /* Normal Boot (Quiet BootRom) */
+#define chipcHw_STRAPS_BOOT_MODE_MASK 0x00000300 /* Mask */
+
+/* Slave Mode straps */
+#define chipcHw_STRAPS_I2CS 0x02000000 /* I2C Slave */
+#define chipcHw_STRAPS_SPIS 0x01000000 /* SPI Slave */
+
+/* Strap pin options */
+#define chipcHw_REG_SW_STRAPS ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
+
+/* PIF/LCD pin sharing defines */
+#define chipcHw_REG_LCD_PIN_ENABLE 0x00000001 /* LCD Controller is used and the pins have LCD functions */
+#define chipcHw_REG_PIF_PIN_ENABLE 0x00000002 /* LCD pins are used to perform PIF functions */
+
+#define chipcHw_GPIO_COUNT 61 /* Number of GPIO pin accessible thorugh CHIPC */
+
+/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
+#define chipcHw_REG_GPIO_MUX_KEYPAD 0x00000001 /* GPIO mux for Keypad */
+#define chipcHw_REG_GPIO_MUX_I2CH 0x00000002 /* GPIO mux for I2CH */
+#define chipcHw_REG_GPIO_MUX_SPI 0x00000003 /* GPIO mux for SPI */
+#define chipcHw_REG_GPIO_MUX_UART 0x00000004 /* GPIO mux for UART */
+#define chipcHw_REG_GPIO_MUX_LEDMTXP 0x00000005 /* GPIO mux for LEDMTXP */
+#define chipcHw_REG_GPIO_MUX_LEDMTXS 0x00000006 /* GPIO mux for LEDMTXS */
+#define chipcHw_REG_GPIO_MUX_SDIO0 0x00000007 /* GPIO mux for SDIO0 */
+#define chipcHw_REG_GPIO_MUX_SDIO1 0x00000008 /* GPIO mux for SDIO1 */
+#define chipcHw_REG_GPIO_MUX_PCM 0x00000009 /* GPIO mux for PCM */
+#define chipcHw_REG_GPIO_MUX_I2S 0x0000000A /* GPIO mux for I2S */
+#define chipcHw_REG_GPIO_MUX_ETM 0x0000000B /* GPIO mux for ETM */
+#define chipcHw_REG_GPIO_MUX_DEBUG 0x0000000C /* GPIO mux for DEBUG */
+#define chipcHw_REG_GPIO_MUX_MISC 0x0000000D /* GPIO mux for MISC */
+#define chipcHw_REG_GPIO_MUX_GPIO 0x00000000 /* GPIO mux for GPIO */
+#define chipcHw_REG_GPIO_MUX(pin) (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
+#define chipcHw_REG_GPIO_MUX_POSITION(pin) (((pin) & 0x00000007) << 2)
+#define chipcHw_REG_GPIO_MUX_MASK 0x0000000F /* Mask */
+
+#define chipcHw_REG_SLEW_RATE_HIGH 0x00000000 /* High speed slew rate */
+#define chipcHw_REG_SLEW_RATE_NORMAL 0x00000008 /* Normal slew rate */
+ /* Pins beyond 42 are defined by skipping 8 bits within the register */
+#define chipcHw_REG_SLEW_RATE(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_SLEW_RATE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+#define chipcHw_REG_SLEW_RATE_MASK 0x00000008 /* Mask */
+
+#define chipcHw_REG_CURRENT_STRENGTH_2mA 0x00000001 /* Current driving strength 2 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_4mA 0x00000002 /* Current driving strength 4 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_6mA 0x00000004 /* Current driving strength 6 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_8mA 0x00000005 /* Current driving strength 8 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_10mA 0x00000006 /* Current driving strength 10 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_12mA 0x00000007 /* Current driving strength 12 milli ampere */
+#define chipcHw_REG_CURRENT_MASK 0x00000007 /* Mask */
+ /* Pins beyond 42 are defined by skipping 8 bits */
+#define chipcHw_REG_CURRENT(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_CURRENT_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+
+#define chipcHw_REG_PULL_NONE 0x00000000 /* No pull up register */
+#define chipcHw_REG_PULL_UP 0x00000001 /* Pull up register enable */
+#define chipcHw_REG_PULL_DOWN 0x00000002 /* Pull down register enable */
+#define chipcHw_REG_PULLUP_MASK 0x00000003 /* Mask */
+ /* Pins beyond 42 are defined by skipping 4 bits */
+#define chipcHw_REG_PULLUP(pin) (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
+#define chipcHw_REG_PULLUP_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
+
+#define chipcHw_REG_INPUTTYPE_CMOS 0x00000000 /* Normal CMOS logic */
+#define chipcHw_REG_INPUTTYPE_ST 0x00000001 /* High speed Schmitt Trigger */
+#define chipcHw_REG_INPUTTYPE_MASK 0x00000001 /* Mask */
+ /* Pins beyond 42 are defined by skipping 2 bits */
+#define chipcHw_REG_INPUTTYPE(pin) (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
+#define chipcHw_REG_INPUTTYPE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
+
+/* Device connected to the bus clock */
+#define chipcHw_REG_BUS_CLOCK_ARM 0x00000001 /* Bus interface clock for ARM */
+#define chipcHw_REG_BUS_CLOCK_VDEC 0x00000002 /* Bus interface clock for VDEC */
+#define chipcHw_REG_BUS_CLOCK_ARAM 0x00000004 /* Bus interface clock for ARAM */
+#define chipcHw_REG_BUS_CLOCK_HPM 0x00000008 /* Bus interface clock for HPM */
+#define chipcHw_REG_BUS_CLOCK_DDRC 0x00000010 /* Bus interface clock for DDRC */
+#define chipcHw_REG_BUS_CLOCK_DMAC0 0x00000020 /* Bus interface clock for DMAC0 */
+#define chipcHw_REG_BUS_CLOCK_DMAC1 0x00000040 /* Bus interface clock for DMAC1 */
+#define chipcHw_REG_BUS_CLOCK_NVI 0x00000080 /* Bus interface clock for NVI */
+#define chipcHw_REG_BUS_CLOCK_ESW 0x00000100 /* Bus interface clock for ESW */
+#define chipcHw_REG_BUS_CLOCK_GE 0x00000200 /* Bus interface clock for GE */
+#define chipcHw_REG_BUS_CLOCK_I2CH 0x00000400 /* Bus interface clock for I2CH */
+#define chipcHw_REG_BUS_CLOCK_I2S0 0x00000800 /* Bus interface clock for I2S0 */
+#define chipcHw_REG_BUS_CLOCK_I2S1 0x00001000 /* Bus interface clock for I2S1 */
+#define chipcHw_REG_BUS_CLOCK_VRAM 0x00002000 /* Bus interface clock for VRAM */
+#define chipcHw_REG_BUS_CLOCK_CLCD 0x00004000 /* Bus interface clock for CLCD */
+#define chipcHw_REG_BUS_CLOCK_LDK 0x00008000 /* Bus interface clock for LDK */
+#define chipcHw_REG_BUS_CLOCK_LED 0x00010000 /* Bus interface clock for LED */
+#define chipcHw_REG_BUS_CLOCK_OTP 0x00020000 /* Bus interface clock for OTP */
+#define chipcHw_REG_BUS_CLOCK_PIF 0x00040000 /* Bus interface clock for PIF */
+#define chipcHw_REG_BUS_CLOCK_SPU 0x00080000 /* Bus interface clock for SPU */
+#define chipcHw_REG_BUS_CLOCK_SDIO0 0x00100000 /* Bus interface clock for SDIO0 */
+#define chipcHw_REG_BUS_CLOCK_SDIO1 0x00200000 /* Bus interface clock for SDIO1 */
+#define chipcHw_REG_BUS_CLOCK_SPIH 0x00400000 /* Bus interface clock for SPIH */
+#define chipcHw_REG_BUS_CLOCK_SPIS 0x00800000 /* Bus interface clock for SPIS */
+#define chipcHw_REG_BUS_CLOCK_UART0 0x01000000 /* Bus interface clock for UART0 */
+#define chipcHw_REG_BUS_CLOCK_UART1 0x02000000 /* Bus interface clock for UART1 */
+#define chipcHw_REG_BUS_CLOCK_BBL 0x04000000 /* Bus interface clock for BBL */
+#define chipcHw_REG_BUS_CLOCK_I2CS 0x08000000 /* Bus interface clock for I2CS */
+#define chipcHw_REG_BUS_CLOCK_USBH 0x10000000 /* Bus interface clock for USB Host */
+#define chipcHw_REG_BUS_CLOCK_USBD 0x20000000 /* Bus interface clock for USB Device */
+#define chipcHw_REG_BUS_CLOCK_BROM 0x40000000 /* Bus interface clock for Boot ROM */
+#define chipcHw_REG_BUS_CLOCK_TSC 0x80000000 /* Bus interface clock for Touch screen */
+
+/* Software resets defines */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD 0x0000000080000000ULL /* Reset Global VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_HOLD 0x0000000040000000ULL /* Reset VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL 0x0000000020000000ULL /* Reset Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM 0x0000000010000000ULL /* Reset VPM */
+#define chipcHw_REG_SOFT_RESET_KEYPAD 0x0000000008000000ULL /* Reset Key pad */
+#define chipcHw_REG_SOFT_RESET_LED 0x0000000004000000ULL /* Reset LED */
+#define chipcHw_REG_SOFT_RESET_SPU 0x0000000002000000ULL /* Reset SPU */
+#define chipcHw_REG_SOFT_RESET_RNG 0x0000000001000000ULL /* Reset RNG */
+#define chipcHw_REG_SOFT_RESET_PKA 0x0000000000800000ULL /* Reset PKA */
+#define chipcHw_REG_SOFT_RESET_LCD 0x0000000000400000ULL /* Reset LCD */
+#define chipcHw_REG_SOFT_RESET_PIF 0x0000000000200000ULL /* Reset PIF */
+#define chipcHw_REG_SOFT_RESET_I2CS 0x0000000000100000ULL /* Reset I2C Slave */
+#define chipcHw_REG_SOFT_RESET_I2CH 0x0000000000080000ULL /* Reset I2C Host */
+#define chipcHw_REG_SOFT_RESET_SDIO1 0x0000000000040000ULL /* Reset SDIO 1 */
+#define chipcHw_REG_SOFT_RESET_SDIO0 0x0000000000020000ULL /* Reset SDIO 0 */
+#define chipcHw_REG_SOFT_RESET_BBL 0x0000000000010000ULL /* Reset BBL */
+#define chipcHw_REG_SOFT_RESET_I2S1 0x0000000000008000ULL /* Reset I2S1 */
+#define chipcHw_REG_SOFT_RESET_I2S0 0x0000000000004000ULL /* Reset I2S0 */
+#define chipcHw_REG_SOFT_RESET_SPIS 0x0000000000002000ULL /* Reset SPI Slave */
+#define chipcHw_REG_SOFT_RESET_SPIH 0x0000000000001000ULL /* Reset SPI Host */
+#define chipcHw_REG_SOFT_RESET_GPIO1 0x0000000000000800ULL /* Reset GPIO block 1 */
+#define chipcHw_REG_SOFT_RESET_GPIO0 0x0000000000000400ULL /* Reset GPIO block 0 */
+#define chipcHw_REG_SOFT_RESET_UART1 0x0000000000000200ULL /* Reset UART 1 */
+#define chipcHw_REG_SOFT_RESET_UART0 0x0000000000000100ULL /* Reset UART 0 */
+#define chipcHw_REG_SOFT_RESET_NVI 0x0000000000000080ULL /* Reset NVI */
+#define chipcHw_REG_SOFT_RESET_WDOG 0x0000000000000040ULL /* Reset Watch dog */
+#define chipcHw_REG_SOFT_RESET_TMR 0x0000000000000020ULL /* Reset Timer */
+#define chipcHw_REG_SOFT_RESET_ETM 0x0000000000000010ULL /* Reset ETM */
+#define chipcHw_REG_SOFT_RESET_ARM_HOLD 0x0000000000000008ULL /* Reset ARM and HOLD */
+#define chipcHw_REG_SOFT_RESET_ARM 0x0000000000000004ULL /* Reset ARM */
+#define chipcHw_REG_SOFT_RESET_CHIP_WARM 0x0000000000000002ULL /* Chip warm reset */
+#define chipcHw_REG_SOFT_RESET_CHIP_SOFT 0x0000000000000001ULL /* Chip soft reset */
+#define chipcHw_REG_SOFT_RESET_VDEC 0x0000100000000000ULL /* Video decoder */
+#define chipcHw_REG_SOFT_RESET_GE 0x0000080000000000ULL /* Graphics engine */
+#define chipcHw_REG_SOFT_RESET_OTP 0x0000040000000000ULL /* Reset OTP */
+#define chipcHw_REG_SOFT_RESET_USB2 0x0000020000000000ULL /* Reset USB2 */
+#define chipcHw_REG_SOFT_RESET_USB1 0x0000010000000000ULL /* Reset USB 1 */
+#define chipcHw_REG_SOFT_RESET_USB 0x0000008000000000ULL /* Reset USB 1 and USB2 soft reset */
+#define chipcHw_REG_SOFT_RESET_ESW 0x0000004000000000ULL /* Reset Ethernet switch */
+#define chipcHw_REG_SOFT_RESET_ESWCLK 0x0000002000000000ULL /* Reset Ethernet switch clock */
+#define chipcHw_REG_SOFT_RESET_DDRPHY 0x0000001000000000ULL /* Reset DDR Physical */
+#define chipcHw_REG_SOFT_RESET_DDR 0x0000000800000000ULL /* Reset DDR Controller */
+#define chipcHw_REG_SOFT_RESET_TSC 0x0000000400000000ULL /* Reset Touch screen */
+#define chipcHw_REG_SOFT_RESET_PCM 0x0000000200000000ULL /* Reset PCM device */
+#define chipcHw_REG_SOFT_RESET_APM 0x0000200100000000ULL /* Reset APM device */
+
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD 0x8000000000000000ULL /* Unhold Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD 0x4000000000000000ULL /* Unhold VPM */
+#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD 0x2000000000000000ULL /* Unhold ARM reset */
+#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK 0xF000000000000000ULL /* Mask to handle unhold request */
+
+/* Audio channel control defines */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL 0x00000001 /* Enable all audio channel */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A 0x00000002 /* Enable channel A */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B 0x00000004 /* Enable channel B */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C 0x00000008 /* Enable channel C */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK 0x00000010 /* Enable NTP clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK 0x00000020 /* Enable PCM0 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK 0x00000040 /* Enable PCM1 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK 0x00000080 /* Enable APM clock */
+
+/* Misc. chip control defines */
+#define chipcHw_REG_MISC_CTRL_GE_SEL 0x00040000 /* Select GE2/GE3 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO 0x00020000 /* Use external clock via GPIO pin 26 for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S0 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO 0x00010000 /* Use external clock via GPIO pin 45 for I2S0 */
+#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE 0x00008000 /* Disable ARM CP15 bit */
+#define chipcHw_REG_MISC_CTRL_RTC_DISABLE 0x00000008 /* Disable RTC registers */
+#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE 0x00000004 /* Disable Battery Backed RAM */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST 0x00000002 /* Set USB as host */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE 0xFFFFFFFD /* Set USB as device */
+#define chipcHw_REG_MISC_CTRL_USB_POWERON 0xFFFFFFFE /* Power up USB */
+#define chipcHw_REG_MISC_CTRL_USB_POWEROFF 0x00000001 /* Power down USB */
+
+/* OTP configuration defines */
+#define chipcHw_REG_OTP_SECURITY_OFF 0x0000020000000000ULL /* Security support is OFF */
+#define chipcHw_REG_OTP_SPU_SLOW 0x0000010000000000ULL /* Limited SPU throughput */
+#define chipcHw_REG_OTP_LCD_SPEED 0x0000000600000000ULL /* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_1 0x0000000100000000ULL /* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_0 0x0000000080000000ULL /* Set VPM speed zero */
+#define chipcHw_REG_OTP_AXI_SPEED 0x0000000060000000ULL /* Set maximum AXI bus speed */
+#define chipcHw_REG_OTP_APM_DISABLE 0x000000001F000000ULL /* Disable APM */
+#define chipcHw_REG_OTP_PIF_DISABLE 0x0000000000200000ULL /* Disable PIF */
+#define chipcHw_REG_OTP_VDEC_DISABLE 0x0000000000100000ULL /* Disable Video decoder */
+#define chipcHw_REG_OTP_BBL_DISABLE 0x0000000000080000ULL /* Disable RTC and BBRAM */
+#define chipcHw_REG_OTP_LED_DISABLE 0x0000000000040000ULL /* Disable LED */
+#define chipcHw_REG_OTP_GE_DISABLE 0x0000000000020000ULL /* Disable Graphics Engine */
+#define chipcHw_REG_OTP_LCD_DISABLE 0x0000000000010000ULL /* Disable LCD */
+#define chipcHw_REG_OTP_KEYPAD_DISABLE 0x0000000000008000ULL /* Disable keypad */
+#define chipcHw_REG_OTP_UART_DISABLE 0x0000000000004000ULL /* Disable UART */
+#define chipcHw_REG_OTP_SDIOH_DISABLE 0x0000000000003000ULL /* Disable SDIO host */
+#define chipcHw_REG_OTP_HSS_DISABLE 0x0000000000000C00ULL /* Disable HSS */
+#define chipcHw_REG_OTP_TSC_DISABLE 0x0000000000000200ULL /* Disable touch screen */
+#define chipcHw_REG_OTP_USB_DISABLE 0x0000000000000180ULL /* Disable USB */
+#define chipcHw_REG_OTP_SGMII_DISABLE 0x0000000000000060ULL /* Disable SGMII */
+#define chipcHw_REG_OTP_ETH_DISABLE 0x0000000000000018ULL /* Disable gigabit ethernet */
+#define chipcHw_REG_OTP_ETH_PHY_DISABLE 0x0000000000000006ULL /* Disable ethernet PHY */
+#define chipcHw_REG_OTP_VPM_DISABLE 0x0000000000000001ULL /* Disable VPM */
+
+/* Sticky bit defines */
+#define chipcHw_REG_STICKY_BOOT_DONE 0x00000001 /* Boot done */
+#define chipcHw_REG_STICKY_SOFT_RESET 0x00000002 /* ARM soft reset */
+#define chipcHw_REG_STICKY_GENERAL_1 0x00000004 /* General purpose bit 1 */
+#define chipcHw_REG_STICKY_GENERAL_2 0x00000008 /* General purpose bit 2 */
+#define chipcHw_REG_STICKY_GENERAL_3 0x00000010 /* General purpose bit 3 */
+#define chipcHw_REG_STICKY_GENERAL_4 0x00000020 /* General purpose bit 4 */
+#define chipcHw_REG_STICKY_GENERAL_5 0x00000040 /* General purpose bit 5 */
+#define chipcHw_REG_STICKY_POR_BROM 0x00000080 /* Special sticky bit for security - set in BROM to avoid other modes being entered */
+#define chipcHw_REG_STICKY_ARM_RESET 0x00000100 /* ARM reset */
+#define chipcHw_REG_STICKY_CHIP_SOFT_RESET 0x00000200 /* Chip soft reset */
+#define chipcHw_REG_STICKY_CHIP_WARM_RESET 0x00000400 /* Chip warm reset */
+#define chipcHw_REG_STICKY_WDOG_RESET 0x00000800 /* Watchdog reset */
+#define chipcHw_REG_STICKY_OTP_RESET 0x00001000 /* OTP reset */
+
+ /* HW phase alignment defines *//* Spare1 register definitions */
+#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE 0x80000000 /* Enable DDR phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE 0x40000000 /* Enable VPM phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE 0x00000002 /* Enable access to VPM using system BUS */
+#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE 0x00000001 /* Enable access to DDR using system BUS */
+ /* DDRPhaseCtrl1 register definitions */
+#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable DDR SW phase alignment */
+#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK 0x0000007F /* DDR lower threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT 23
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK 0x0000007F /* DDR upper threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT 16
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to run next DDR phase alignment */
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0
+ /* VPMPhaseCtrl1 register definitions */
+#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable VPM SW phase alignment */
+#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK 0x0000007F /* VPM lower threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT 23
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK 0x0000007F /* VPM upper threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT 16
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to complete the VPM phase alignment */
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0
+ /* PhaseAlignStatus register definitions */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS 0x80000000 /* DDR time out interrupt status */
+#define chipcHw_REG_DDR_PHASE_STATUS_MASK 0x0000007F /* DDR phase status value */
+#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT 24
+#define chipcHw_REG_DDR_PHASE_ALIGNED 0x00800000 /* DDR Phase aligned status */
+#define chipcHw_REG_DDR_LOAD 0x00400000 /* Load DDR phase status */
+#define chipcHw_REG_DDR_PHASE_CTRL_MASK 0x0000003F /* DDR phase control value */
+#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT 16
+#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS 0x80000000 /* VPM time out interrupt status */
+#define chipcHw_REG_VPM_PHASE_STATUS_MASK 0x0000007F /* VPM phase status value */
+#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT 8
+#define chipcHw_REG_VPM_PHASE_ALIGNED 0x00000080 /* VPM Phase aligned status */
+#define chipcHw_REG_VPM_LOAD 0x00000040 /* Load VPM phase status */
+#define chipcHw_REG_VPM_PHASE_CTRL_MASK 0x0000003F /* VPM phase control value */
+#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT 0
+ /* DDRPhaseCtrl2 register definitions */
+#define chipcHw_REG_DDR_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT 20
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait to settle ph_ctrl and load_ch */
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT 16
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT 0
+ /* VPMPhaseCtrl2 register definitions */
+#define chipcHw_REG_VPM_INTR_SELECT_MASK 0x00000003 /* Interrupt select */
+#define chipcHw_REG_VPM_INTR_SELECT_SHIFT 26
+#define chipcHw_REG_VPM_INTR_DISABLE 0x00000000
+#define chipcHw_REG_VPM_INTR_FAST (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_MEDIUM (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SLOW (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT 20
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait cycle to settle ph_ctrl and load_ch */
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT 16
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT 0
+
+#endif /* CHIPCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
new file mode 100644
index 00000000000..f1b68e26fa6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
@@ -0,0 +1,872 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file ddrcReg.h
+*
+* @brief Register definitions for BCMRING DDR2 Controller and PHY
+*
+*/
+/****************************************************************************/
+
+#ifndef DDRC_REG_H
+#define DDRC_REG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/reg.h>
+#include <csp/stdint.h>
+
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*********************************************************************/
+/* DDR2 Controller (ARM PL341) register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 DDR2 configuration registers, offset 0x000 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+ typedef struct {
+ uint32_t memcStatus;
+ uint32_t memcCmd;
+ uint32_t directCmd;
+ uint32_t memoryCfg;
+ uint32_t refreshPrd;
+ uint32_t casLatency;
+ uint32_t writeLatency;
+ uint32_t tMrd;
+ uint32_t tRas;
+ uint32_t tRc;
+ uint32_t tRcd;
+ uint32_t tRfc;
+ uint32_t tRp;
+ uint32_t tRrd;
+ uint32_t tWr;
+ uint32_t tWtr;
+ uint32_t tXp;
+ uint32_t tXsr;
+ uint32_t tEsr;
+ uint32_t memoryCfg2;
+ uint32_t memoryCfg3;
+ uint32_t tFaw;
+ } ddrcReg_CTLR_MEMC_REG_t;
+
+#define ddrcReg_CTLR_MEMC_REG_OFFSET 0x0000
+#define ddrcReg_CTLR_MEMC_REGP ((volatile ddrcReg_CTLR_MEMC_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK (0x3 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4 (0x0 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8 (0x3 << 12)
+
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK (0x3 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0 (0x0 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1 (0x1 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2 (0x2 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4 (0x3 << 10)
+
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK (0x3 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1 (0x0 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2 (0x1 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3 (0x2 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4 (0x3 << 7)
+
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK (0x7 << 4)
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2 (0x5 << 4)
+
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK (0x3 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16 (0x0 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32 (0x1 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64 (0x2 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128 (0x3 << 2)
+
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_CMD_MASK (0x7 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_GO (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_SLEEP (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_WAKEUP (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_PAUSE (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE (0x4 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE (0x7 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT 20
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL (0x0 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH (0x1 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG (0x2 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP (0x3 << 18)
+
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT 16
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT 0
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK (0x3 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1 (0x0 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2 (0x1 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3 (0x2 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4 (0x3 << 21)
+
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK (0x7 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0 (0x0 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1 (0x1 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2 (0x2 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3 (0x3 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4 (0x4 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5 (0x5 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6 (0x6 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7 (0x7 << 18)
+
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK (0x7 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4 (0x2 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8 (0x3 << 15) /* @note Not supported in PL341 */
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE (0x1 << 13)
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT 7
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK (0x7 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11 (0x0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12 (0x1 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13 (0x2 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14 (0x3 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15 (0x4 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16 (0x5 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK (0x7 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9 (0x1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10 (0x2 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11 (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_REFRESH_PRD_SHIFT 0
+#define ddrcReg_CTLR_REFRESH_PRD_MASK (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CAS_LATENCY_SHIFT 1
+#define ddrcReg_CTLR_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT 0
+#define ddrcReg_CTLR_WRITE_LATENCY_MASK (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_MRD_SHIFT 0
+#define ddrcReg_CTLR_T_MRD_MASK (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RAS_SHIFT 0
+#define ddrcReg_CTLR_T_RAS_MASK (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RC_SHIFT 0
+#define ddrcReg_CTLR_T_RC_MASK (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RCD_SHIFT 0
+#define ddrcReg_CTLR_T_RCD_MASK (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RFC_SHIFT 0
+#define ddrcReg_CTLR_T_RFC_MASK (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RP_SHIFT 0
+#define ddrcReg_CTLR_T_RP_MASK (0xf << ddrcReg_CTLR_T_RP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RRD_SHIFT 0
+#define ddrcReg_CTLR_T_RRD_MASK (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WR_SHIFT 0
+#define ddrcReg_CTLR_T_WR_MASK (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WTR_SHIFT 0
+#define ddrcReg_CTLR_T_WTR_MASK (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XP_SHIFT 0
+#define ddrcReg_CTLR_T_XP_MASK (0xff << ddrcReg_CTLR_T_XP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XSR_SHIFT 0
+#define ddrcReg_CTLR_T_XSR_MASK (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_ESR_SHIFT 0
+#define ddrcReg_CTLR_T_ESR_MASK (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK (0x3 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS (0 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS (1 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS (2 << 6)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK (0x3 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2 (0 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3 (3 << 4)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW (0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH (1 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW (0 << 2)
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH (1 << 2)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK (0x3 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC (0 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M (1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M (3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT 0
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT 0
+#define ddrcReg_CTLR_T_FAW_PERIOD_MASK (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CNT 16
+#define ddrcReg_CTLR_QOS_MAX (ddrcReg_CTLR_QOS_CNT - 1)
+
+ typedef struct {
+ uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
+ } ddrcReg_CTLR_QOS_REG_t;
+
+#define ddrcReg_CTLR_QOS_REG_OFFSET 0x100
+#define ddrcReg_CTLR_QOS_REGP ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT 2
+#define ddrcReg_CTLR_QOS_CFG_MAX_MASK (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT 1
+#define ddrcReg_CTLR_QOS_CFG_MIN_MASK (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_ENABLE (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 Memory chip configuration registers, offset 0x200 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CNT 4
+#define ddrcReg_CTLR_CHIP_MAX (ddrcReg_CTLR_CHIP_CNT - 1)
+
+ typedef struct {
+ uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
+ } ddrcReg_CTLR_CHIP_REG_t;
+
+#define ddrcReg_CTLR_CHIP_REG_OFFSET 0x200
+#define ddrcReg_CTLR_CHIP_REGP ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK (1 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL (0 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL (1 << 16)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT 8
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT 0
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 User configuration registers, offset 0x300 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CNT 2
+
+ typedef struct {
+ uint32_t input;
+ uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
+ uint32_t feature;
+ } ddrcReg_CTLR_USER_REG_t;
+
+#define ddrcReg_CTLR_USER_REG_OFFSET 0x300
+#define ddrcReg_CTLR_USER_REGP ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT 0
+#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT 0
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
+
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT 1
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE (1 << 2)
+#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE (1 << 0)
+
+/*********************************************************************/
+/* Broadcom DDR23 PHY register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Address and Control register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+ typedef struct {
+ uint32_t revision;
+ uint32_t pmCtl;
+ REG32_RSVD(0x0008, 0x0010);
+ uint32_t pllStatus;
+ uint32_t pllCfg;
+ uint32_t pllPreDiv;
+ uint32_t pllDiv;
+ uint32_t pllCtl1;
+ uint32_t pllCtl2;
+ uint32_t ssCtl;
+ uint32_t ssCfg;
+ uint32_t vdlStatic;
+ uint32_t vdlDynamic;
+ uint32_t padIdle;
+ uint32_t pvtComp;
+ uint32_t padDrive;
+ uint32_t clkRgltrCtl;
+ } ddrcReg_PHY_ADDR_CTL_REG_t;
+
+#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET 0x0400
+#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+
+/* @todo These SS definitions are duplicates of ones below */
+
+#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE 0x00000001
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK 0xFFFF0000
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT 16
+#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK 10 /* Higher the value, lower the SS modulation frequency */
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK 0x0000FFFF
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT 0
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET (1 << 31)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT 17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG (1 << 7)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN (1 << 25)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT 20
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT 24
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT 30
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT 27
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT 24
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT 22
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER (0x1 << 21)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT 19
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT 17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT 15
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT 13
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT 10
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT 5
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT 2
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE (0x1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT 16
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE (1 << 20)
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE (1u << 31)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE (1 << 8)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE (1 << 30)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE (1 << 29)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE (1 << 28)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE (1 << 27)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE (1 << 25)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE (1 << 24)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT 20
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT 16
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18 (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Byte Lane register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CNT 2
+#define ddrcReg_PHY_BYTE_LANE_MAX (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT 8
+
+ typedef struct {
+ uint32_t revision;
+ uint32_t vdlCalibrate;
+ uint32_t vdlStatus;
+ REG32_RSVD(0x000c, 0x0010);
+ uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
+ uint32_t readCtl;
+ uint32_t readStatus;
+ uint32_t readClear;
+ uint32_t padIdleCtl;
+ uint32_t padDriveCtl;
+ uint32_t padClkCtl;
+ uint32_t writeCtl;
+ uint32_t clkRegCtl;
+ } ddrcReg_PHY_BYTE_LANE_REG_t;
+
+/* There are 2 instances of the byte Lane registers, one for each byte lane. */
+#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET 0x0500
+#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET 0x0600
+
+#define ddrcReg_PHY_BYTE_LANE_1_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
+#define ddrcReg_PHY_BYTE_LANE_2_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE (0 << 4)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST (1 << 0)
+
+/* ----------------------------------------------------- */
+
+/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
+/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
+/* register. The fine rise and fall are no longer used, so add some definitions for just */
+/* the step setting to simplify things. */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT 4
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P 0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N 1
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN 2
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM 3
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P 4
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N 5
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN 6
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM 7
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE (1u << 31)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE (1 << 19)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE (1 << 18)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE (1 << 17)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE (1 << 16)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE (1 << 15)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE (1 << 14)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE (1 << 13)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE (1 << 12)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE (1 << 11)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE (1 << 10)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE (1 << 9)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE (1 << 8)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE (1 << 7)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE (1 << 6)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18 (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3 (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF (1 << 0)
+
+/*********************************************************************/
+/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
+/*********************************************************************/
+
+ typedef struct {
+ uint32_t cfg;
+ uint32_t actMonCnt;
+ uint32_t ctl;
+ uint32_t lbistCtl;
+ uint32_t lbistSeed;
+ uint32_t lbistStatus;
+ uint32_t tieOff;
+ uint32_t actMonClear;
+ uint32_t status;
+ uint32_t user;
+ } ddrcReg_CTLR_PHY_GLUE_REG_t;
+
+#define ddrcReg_CTLR_PHY_GLUE_OFFSET 0x0700
+#define ddrcReg_CTLR_PHY_GLUE_REGP ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
+
+/* ----------------------------------------------------- */
+
+/* DDR2 / AXI block phase alignment interrupt control */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT 18
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT 17
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT 16
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT 15
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
+
+/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
+/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
+/* controller. If 2 chips selects are being used, then software control must be enabled. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD (1 << 14)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE (1 << 13)
+
+/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
+
+/* Chip select count */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT 9
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT 8
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT 7
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT 6
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT 0
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT 0
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
+
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#ifdef __cplusplus
+} /* end extern "C" */
+#endif
+#endif /* DDRC_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
new file mode 100644
index 00000000000..375066ad018
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_priv.h
+*
+* @brief Private Definitions for low level DMA driver
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_PRIV_H
+#define _DMACHW_PRIV_H
+
+#include <csp/stdint.h>
+
+/* Data type for DMA Link List Item */
+typedef struct {
+ uint32_t sar; /* Source Adress Register.
+ Address must be aligned to CTLx.SRC_TR_WIDTH. */
+ uint32_t dar; /* Destination Address Register.
+ Address must be aligned to CTLx.DST_TR_WIDTH. */
+ uint32_t llpPhy; /* LLP contains the physical address of the next descriptor for block chaining using linked lists.
+ Address MUST be aligned to a 32-bit boundary. */
+ dmacHw_REG64_t ctl; /* Control Register. 64 bits */
+ uint32_t sstat; /* Source Status Register */
+ uint32_t dstat; /* Destination Status Register */
+ uint32_t devCtl; /* Device specific control information */
+ uint32_t llp; /* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
+} dmacHw_DESC_t;
+
+/*
+ * Descriptor ring pointers
+ */
+typedef struct {
+ int num; /* Number of link items */
+ dmacHw_DESC_t *pHead; /* Head of descriptor ring (for writing) */
+ dmacHw_DESC_t *pTail; /* Tail of descriptor ring (for reading) */
+ dmacHw_DESC_t *pProg; /* Descriptor to program the channel (for programming the channel register) */
+ dmacHw_DESC_t *pEnd; /* End of current descriptor chain */
+ dmacHw_DESC_t *pFree; /* Descriptor to free memory (freeing dynamic memory) */
+ uint32_t virt2PhyOffset; /* Virtual to physical address offset for the descriptor ring */
+} dmacHw_DESC_RING_t;
+
+/*
+ * DMA channel control block
+ */
+typedef struct {
+ uint32_t module; /* DMA controller module (0-1) */
+ uint32_t channel; /* DMA channel (0-7) */
+ volatile uint32_t varDataStarted; /* Flag indicating variable data channel is enabled */
+ volatile uint32_t descUpdated; /* Flag to indicate descriptor update is complete */
+ void *userData; /* Channel specifc user data */
+} dmacHw_CBLK_t;
+
+#define dmacHw_ASSERT(a) if (!(a)) while (1)
+#define dmacHw_MAX_CHANNEL_COUNT 16
+#define dmacHw_FREE_USER_MEMORY 0xFFFFFFFF
+#define dmacHw_DESC_FREE dmacHw_REG_CTL_DONE
+#define dmacHw_DESC_INIT ((dmacHw_DESC_t *) 0xFFFFFFFF)
+#define dmacHw_MAX_BLOCKSIZE 4064
+#define dmacHw_GET_DESC_RING(addr) (dmacHw_DESC_RING_t *)(addr)
+#define dmacHw_ADDRESS_MASK(byte) ((byte) - 1)
+#define dmacHw_NEXT_DESC(rp, dp) ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
+#define dmacHw_HANDLE_TO_CBLK(handle) ((dmacHw_CBLK_t *) (handle))
+#define dmacHw_CBLK_TO_HANDLE(cblkp) ((dmacHw_HANDLE_t) (cblkp))
+#define dmacHw_DST_IS_MEMORY(tt) (((tt) == dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
+
+/****************************************************************************/
+/**
+* @brief Get next available transaction width
+*
+*
+* @return On sucess : Next avail able transaction width
+* On failure : dmacHw_TRANSACTION_WIDTH_8
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Current transaction width */
+ ) {
+ if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+ return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
+ 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
+ } else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
+ return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
+ 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
+ }
+
+ /* Default return */
+ return dmacHw_SRC_TRANSACTION_WIDTH_8;
+}
+
+/****************************************************************************/
+/**
+* @brief Get number of bytes per transaction
+*
+* @return Number of bytes per transaction
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Transaction width */
+ ) {
+ int width = 1;
+ switch (tw) {
+ case dmacHw_SRC_TRANSACTION_WIDTH_8:
+ width = 1;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_16:
+ case dmacHw_DST_TRANSACTION_WIDTH_16:
+ width = 2;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_32:
+ case dmacHw_DST_TRANSACTION_WIDTH_32:
+ width = 4;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_64:
+ case dmacHw_DST_TRANSACTION_WIDTH_64:
+ width = 8;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+
+ /* Default transaction width */
+ return width;
+}
+
+#endif /* _DMACHW_PRIV_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
new file mode 100644
index 00000000000..891cea87e33
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -0,0 +1,406 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_reg.h
+*
+* @brief Definitions for low level DMA registers
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_REG_H
+#define _DMACHW_REG_H
+
+#include <csp/stdint.h>
+#include <mach/csp/mm_io.h>
+
+/* Data type for 64 bit little endian register */
+typedef struct {
+ volatile uint32_t lo; /* Lower 32 bit in little endian mode */
+ volatile uint32_t hi; /* Upper 32 bit in little endian mode */
+} dmacHw_REG64_t;
+
+/* Data type representing DMA channel registers */
+typedef struct {
+ dmacHw_REG64_t ChannelSar; /* Source Adress Register. 64 bits (upper 32 bits are reserved)
+ Address must be aligned to CTLx.SRC_TR_WIDTH.
+ */
+ dmacHw_REG64_t ChannelDar; /* Destination Address Register.64 bits (upper 32 bits are reserved)
+ Address must be aligned to CTLx.DST_TR_WIDTH.
+ */
+ dmacHw_REG64_t ChannelLlp; /* Link List Pointer.64 bits (upper 32 bits are reserved)
+ LLP contains the pointer to the next LLI for block chaining using linked lists.
+ If LLPis set to 0x0, then transfers using linked lists are not enabled.
+ Address MUST be aligned to a 32-bit boundary.
+ */
+ dmacHw_REG64_t ChannelCtl; /* Control Register. 64 bits */
+ dmacHw_REG64_t ChannelSstat; /* Source Status Register */
+ dmacHw_REG64_t ChannelDstat; /* Destination Status Register */
+ dmacHw_REG64_t ChannelSstatAddr; /* Source Status Address Register */
+ dmacHw_REG64_t ChannelDstatAddr; /* Destination Status Address Register */
+ dmacHw_REG64_t ChannelConfig; /* Channel Configuration Register */
+ dmacHw_REG64_t SrcGather; /* Source gather register */
+ dmacHw_REG64_t DstScatter; /* Destination scatter register */
+} dmacHw_CH_REG_t;
+
+/* Data type for RAW interrupt status registers */
+typedef struct {
+ dmacHw_REG64_t RawTfr; /* Raw Status for IntTfr Interrupt */
+ dmacHw_REG64_t RawBlock; /* Raw Status for IntBlock Interrupt */
+ dmacHw_REG64_t RawSrcTran; /* Raw Status for IntSrcTran Interrupt */
+ dmacHw_REG64_t RawDstTran; /* Raw Status for IntDstTran Interrupt */
+ dmacHw_REG64_t RawErr; /* Raw Status for IntErr Interrupt */
+} dmacHw_INT_RAW_t;
+
+/* Data type for interrupt status registers */
+typedef struct {
+ dmacHw_REG64_t StatusTfr; /* Status for IntTfr Interrupt */
+ dmacHw_REG64_t StatusBlock; /* Status for IntBlock Interrupt */
+ dmacHw_REG64_t StatusSrcTran; /* Status for IntSrcTran Interrupt */
+ dmacHw_REG64_t StatusDstTran; /* Status for IntDstTran Interrupt */
+ dmacHw_REG64_t StatusErr; /* Status for IntErr Interrupt */
+} dmacHw_INT_STATUS_t;
+
+/* Data type for interrupt mask registers*/
+typedef struct {
+ dmacHw_REG64_t MaskTfr; /* Mask for IntTfr Interrupt */
+ dmacHw_REG64_t MaskBlock; /* Mask for IntBlock Interrupt */
+ dmacHw_REG64_t MaskSrcTran; /* Mask for IntSrcTran Interrupt */
+ dmacHw_REG64_t MaskDstTran; /* Mask for IntDstTran Interrupt */
+ dmacHw_REG64_t MaskErr; /* Mask for IntErr Interrupt */
+} dmacHw_INT_MASK_t;
+
+/* Data type for interrupt clear registers */
+typedef struct {
+ dmacHw_REG64_t ClearTfr; /* Clear for IntTfr Interrupt */
+ dmacHw_REG64_t ClearBlock; /* Clear for IntBlock Interrupt */
+ dmacHw_REG64_t ClearSrcTran; /* Clear for IntSrcTran Interrupt */
+ dmacHw_REG64_t ClearDstTran; /* Clear for IntDstTran Interrupt */
+ dmacHw_REG64_t ClearErr; /* Clear for IntErr Interrupt */
+ dmacHw_REG64_t StatusInt; /* Status for each interrupt type */
+} dmacHw_INT_CLEAR_t;
+
+/* Data type for software handshaking registers */
+typedef struct {
+ dmacHw_REG64_t ReqSrcReg; /* Source Software Transaction Request Register */
+ dmacHw_REG64_t ReqDstReg; /* Destination Software Transaction Request Register */
+ dmacHw_REG64_t SglReqSrcReg; /* Single Source Transaction Request Register */
+ dmacHw_REG64_t SglReqDstReg; /* Single Destination Transaction Request Register */
+ dmacHw_REG64_t LstSrcReg; /* Last Source Transaction Request Register */
+ dmacHw_REG64_t LstDstReg; /* Last Destination Transaction Request Register */
+} dmacHw_SW_HANDSHAKE_t;
+
+/* Data type for misc. registers */
+typedef struct {
+ dmacHw_REG64_t DmaCfgReg; /* DMA Configuration Register */
+ dmacHw_REG64_t ChEnReg; /* DMA Channel Enable Register */
+ dmacHw_REG64_t DmaIdReg; /* DMA ID Register */
+ dmacHw_REG64_t DmaTestReg; /* DMA Test Register */
+ dmacHw_REG64_t Reserved0; /* Reserved */
+ dmacHw_REG64_t Reserved1; /* Reserved */
+ dmacHw_REG64_t CompParm6; /* Component Parameter 6 */
+ dmacHw_REG64_t CompParm5; /* Component Parameter 5 */
+ dmacHw_REG64_t CompParm4; /* Component Parameter 4 */
+ dmacHw_REG64_t CompParm3; /* Component Parameter 3 */
+ dmacHw_REG64_t CompParm2; /* Component Parameter 2 */
+ dmacHw_REG64_t CompParm1; /* Component Parameter 1 */
+ dmacHw_REG64_t CompId; /* Compoent ID */
+} dmacHw_MISC_t;
+
+/* Base registers */
+#define dmacHw_0_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */
+
+extern uint32_t dmaChannelCount_0;
+extern uint32_t dmaChannelCount_1;
+
+/* Define channel specific registers */
+#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+
+/* Raw interrupt status registers */
+#define dmacHw_REG_INT_RAW_BASE(module) ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_STAT_BASE(module) ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_MASK_BASE(module) ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+
+/* Interrupt clear registers */
+#define dmacHw_REG_INT_CLEAR_BASE(module) ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+
+/* Software handshaking registers */
+#define dmacHw_REG_SW_HS_BASE(module) ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+
+/* Miscellaneous registers */
+#define dmacHw_REG_MISC_BASE(module) ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+
+/* Channel control registers */
+#define dmacHw_REG_SAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
+#define dmacHw_REG_DAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
+#define dmacHw_REG_LLP(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
+
+#define dmacHw_REG_CTL_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
+#define dmacHw_REG_CTL_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
+
+#define dmacHw_REG_SSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
+#define dmacHw_REG_DSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
+#define dmacHw_REG_SSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
+#define dmacHw_REG_DSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
+
+#define dmacHw_REG_CFG_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
+#define dmacHw_REG_CFG_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
+
+#define dmacHw_REG_SGR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
+#define dmacHw_REG_SGR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
+
+#define dmacHw_REG_DSR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
+#define dmacHw_REG_DSR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
+
+#define INT_STATUS_MASK(channel) (0x00000001 << (channel))
+#define CHANNEL_BUSY(mod, channel) (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
+
+/* Bit mask for REG_DMACx_CTL_LO */
+
+#define dmacHw_REG_CTL_INT_EN 0x00000001 /* Channel interrupt enable */
+
+#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK 0x0000000E /* Destination transaction width mask */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT 1
+#define dmacHw_REG_CTL_DST_TR_WIDTH_8 0x00000000 /* Destination transaction width 8 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_16 0x00000002 /* Destination transaction width 16 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_32 0x00000004 /* Destination transaction width 32 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_64 0x00000006 /* Destination transaction width 64 bit */
+
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK 0x00000070 /* Source transaction width mask */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT 4
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_8 0x00000000 /* Source transaction width 8 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_16 0x00000010 /* Source transaction width 16 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_32 0x00000020 /* Source transaction width 32 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_64 0x00000030 /* Source transaction width 64 bit */
+
+#define dmacHw_REG_CTL_DS_ENABLE 0x00040000 /* Destination scatter enable */
+#define dmacHw_REG_CTL_SG_ENABLE 0x00020000 /* Source gather enable */
+
+#define dmacHw_REG_CTL_DINC_MASK 0x00000180 /* Destination address inc/dec mask */
+#define dmacHw_REG_CTL_DINC_INC 0x00000000 /* Destination address increment */
+#define dmacHw_REG_CTL_DINC_DEC 0x00000080 /* Destination address decrement */
+#define dmacHw_REG_CTL_DINC_NC 0x00000100 /* Destination address no change */
+
+#define dmacHw_REG_CTL_SINC_MASK 0x00000600 /* Source address inc/dec mask */
+#define dmacHw_REG_CTL_SINC_INC 0x00000000 /* Source address increment */
+#define dmacHw_REG_CTL_SINC_DEC 0x00000200 /* Source address decrement */
+#define dmacHw_REG_CTL_SINC_NC 0x00000400 /* Source address no change */
+
+#define dmacHw_REG_CTL_DST_MSIZE_MASK 0x00003800 /* Destination burst transaction length */
+#define dmacHw_REG_CTL_DST_MSIZE_0 0x00000000 /* No Destination burst */
+#define dmacHw_REG_CTL_DST_MSIZE_4 0x00000800 /* Destination burst transaction length 4 */
+#define dmacHw_REG_CTL_DST_MSIZE_8 0x00001000 /* Destination burst transaction length 8 */
+#define dmacHw_REG_CTL_DST_MSIZE_16 0x00001800 /* Destination burst transaction length 16 */
+
+#define dmacHw_REG_CTL_SRC_MSIZE_MASK 0x0001C000 /* Source burst transaction length */
+#define dmacHw_REG_CTL_SRC_MSIZE_0 0x00000000 /* No Source burst */
+#define dmacHw_REG_CTL_SRC_MSIZE_4 0x00004000 /* Source burst transaction length 4 */
+#define dmacHw_REG_CTL_SRC_MSIZE_8 0x00008000 /* Source burst transaction length 8 */
+#define dmacHw_REG_CTL_SRC_MSIZE_16 0x0000C000 /* Source burst transaction length 16 */
+
+#define dmacHw_REG_CTL_TTFC_MASK 0x00700000 /* Transfer type and flow controller */
+#define dmacHw_REG_CTL_TTFC_MM_DMAC 0x00000000 /* Memory to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_DMAC 0x00100000 /* Memory to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_DMAC 0x00200000 /* Peripheral to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DMAC 0x00300000 /* Peripheral to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_PERI 0x00400000 /* Peripheral to Memory with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_SPERI 0x00500000 /* Peripheral to Peripheral with Source Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_PERI 0x00600000 /* Memory to Peripheral with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DPERI 0x00700000 /* Peripheral to Peripheral with Destination Peripheral as flow controller */
+
+#define dmacHw_REG_CTL_DMS_MASK 0x01800000 /* Destination AHB master interface */
+#define dmacHw_REG_CTL_DMS_1 0x00000000 /* Destination AHB master interface 1 */
+#define dmacHw_REG_CTL_DMS_2 0x00800000 /* Destination AHB master interface 2 */
+
+#define dmacHw_REG_CTL_SMS_MASK 0x06000000 /* Source AHB master interface */
+#define dmacHw_REG_CTL_SMS_1 0x00000000 /* Source AHB master interface 1 */
+#define dmacHw_REG_CTL_SMS_2 0x02000000 /* Source AHB master interface 2 */
+
+#define dmacHw_REG_CTL_LLP_DST_EN 0x08000000 /* Block chaining enable for destination side */
+#define dmacHw_REG_CTL_LLP_SRC_EN 0x10000000 /* Block chaining enable for source side */
+
+/* Bit mask for REG_DMACx_CTL_HI */
+#define dmacHw_REG_CTL_BLOCK_TS_MASK 0x00000FFF /* Block transfer size */
+#define dmacHw_REG_CTL_DONE 0x00001000 /* Block trasnfer done */
+
+/* Bit mask for REG_DMACx_CFG_LO */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT 5 /* Channel priority shift */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK 0x000000E0 /* Channel priority mask */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_0 0x00000000 /* Channel priority 0 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_1 0x00000020 /* Channel priority 1 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_2 0x00000040 /* Channel priority 2 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_3 0x00000060 /* Channel priority 3 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_4 0x00000080 /* Channel priority 4 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_5 0x000000A0 /* Channel priority 5 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_6 0x000000C0 /* Channel priority 6 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_7 0x000000E0 /* Channel priority 7 */
+
+#define dmacHw_REG_CFG_LO_CH_SUSPEND 0x00000100 /* Channel suspend */
+#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY 0x00000200 /* Channel FIFO empty */
+#define dmacHw_REG_CFG_LO_DST_CH_SW_HS 0x00000400 /* Destination channel SW handshaking */
+#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS 0x00000800 /* Source channel SW handshaking */
+
+#define dmacHw_REG_CFG_LO_CH_LOCK_MASK 0x00003000 /* Channel locking mask */
+#define dmacHw_REG_CFG_LO_CH_LOCK_DMA 0x00000000 /* Channel lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK 0x00001000 /* Channel lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS 0x00002000 /* Channel lock over the transaction */
+#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE 0x00010000 /* Channel lock enable */
+
+#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK 0x0000C000 /* Bus locking mask */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA 0x00000000 /* Bus lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK 0x00004000 /* Bus lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS 0x00008000 /* Bus lock over the transaction */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE 0x00020000 /* Bus lock enable */
+
+#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW 0x00040000 /* Destination channel handshaking signal polarity low */
+#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW 0x00080000 /* Source channel handshaking signal polarity low */
+
+#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK 0x3FF00000 /* Maximum AMBA burst length */
+
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC 0x40000000 /* Source address auto reload */
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST 0x80000000 /* Destination address auto reload */
+
+/* Bit mask for REG_DMACx_CFG_HI */
+#define dmacHw_REG_CFG_HI_FC_DST_READY 0x00000001 /* Source transaction request is serviced when destination is ready */
+#define dmacHw_REG_CFG_HI_FIFO_ENOUGH 0x00000002 /* Initiate burst transaction when enough data in available in FIFO */
+
+#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK 0x0000001C /* AHB protection mask */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_1 0x00000004 /* AHB protection 1 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_2 0x00000008 /* AHB protection 2 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_3 0x00000010 /* AHB protection 3 */
+
+#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT 0x00000020 /* Destination status update enable */
+#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT 0x00000040 /* Source status update enable */
+
+#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK 0x00000780 /* Source peripheral hardware interface mask */
+#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK 0x00007800 /* Destination peripheral hardware interface mask */
+
+/* DMA Configuration Parameters */
+#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS 0x00000700 /* Number of channels */
+#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE 0x00001800 /* Number of master interface */
+#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE 0x0000000f /* Maximum brust size */
+#define dmacHw_REG_COMP_PARAM_DATA_WIDTH 0x00006000 /* Data transfer width */
+
+/* Define GET/SET macros to program the registers */
+#define dmacHw_SET_SAR(module, channel, addr) (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DAR(module, channel, addr) (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_LLP(module, channel, ptr) (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
+
+#define dmacHw_GET_SSTAT(module, channel) (dmacHw_REG_SSTAT((module), (channel)))
+#define dmacHw_GET_DSTAT(module, channel) (dmacHw_REG_DSTAT((module), (channel)))
+
+#define dmacHw_SET_SSTATAR(module, channel, addr) (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DSTATAR(module, channel, addr) (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
+
+#define dmacHw_SET_CONTROL_LO(module, channel, ctl) (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel)))
+
+#define dmacHw_SET_CONTROL_HI(module, channel, ctl) (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel)))
+
+#define dmacHw_GET_BLOCK_SIZE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
+#define dmacHw_DMA_COMPLETE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
+
+#define dmacHw_SET_CONFIG_LO(module, channel, cfg) (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel)))
+#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
+#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
+#define dmacHw_SET_AHB_HPROT(module, channel, protect) (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
+
+#define dmacHw_SET_CONFIG_HI(module, channel, cfg) (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel)))
+#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
+#define dmacHw_SRC_PERI_INTF(intf) (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
+#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
+#define dmacHw_DST_PERI_INTF(intf) (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
+
+#define dmacHw_DMA_START(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_DMA_STOP(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DMA_ENABLE(module) (dmacHw_REG_MISC_CFG((module)) = 1)
+#define dmacHw_DMA_DISABLE(module) (dmacHw_REG_MISC_CFG((module)) = 0)
+
+#define dmacHw_TRAN_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+
+#define dmacHw_TRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_BLOCK_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_ERROR_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_STRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DTRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
+
+#define dmacHw_TRAN_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
+
+#define dmacHw_GET_NUM_CHANNEL(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
+#define dmacHw_GET_NUM_INTERFACE(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
+#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
+#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
+
+#endif /* _DMACHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
new file mode 100644
index 00000000000..cfa91bed9d3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
@@ -0,0 +1,73 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_HW_CFG_H
+#define CSP_HW_CFG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <cfg_global.h>
+#include <mach/csp/cap_inline.h>
+
+#if defined(__KERNEL__)
+#include <mach/memory_settings.h>
+#else
+#include <hw_cfg.h>
+#endif
+
+/* Some items that can be defined externally, but will be set to default values */
+/* if they are not defined. */
+/* HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE Default undefined and SS is enabled. */
+/* HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */
+/* HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */
+/* HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */
+/* HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */
+/* HW_CFG_SDRAM_ADDR_BRC Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
+/* HW_CFG_SDRAM_CLK_ASYNC Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
+
+#if defined(CFG_GLOBAL_CHIP)
+ #if (CFG_GLOBAL_CHIP == FPGA11107)
+ #define HW_CFG_BUS_CLK_HZ 5000000
+ #define HW_CFG_DDR_CTLR_CLK_HZ 10000000
+ #define HW_CFG_DDR_PHY_OMIT
+ #define HW_CFG_UART_CLK_HZ 7500000
+ #else
+ #define HW_CFG_PLL_VCO_HZ 2000000000
+ #define HW_CFG_PLL2_VCO_HZ 1800000000
+ #define HW_CFG_ARM_CLK_HZ CAP_HW_CFG_ARM_CLK_HZ
+ #define HW_CFG_BUS_CLK_HZ 166666666
+ #define HW_CFG_DDR_CTLR_CLK_HZ 333333333
+ #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+ #define HW_CFG_UART_CLK_HZ 142857142
+ #define HW_CFG_VPM_CLK_HZ CAP_HW_CFG_VPM_CLK_HZ
+ #endif
+#else
+ #define HW_CFG_PLL_VCO_HZ 1800000000
+ #define HW_CFG_PLL2_VCO_HZ 1800000000
+ #define HW_CFG_ARM_CLK_HZ 450000000
+ #define HW_CFG_BUS_CLK_HZ 150000000
+ #define HW_CFG_DDR_CTLR_CLK_HZ 300000000
+ #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+ #define HW_CFG_UART_CLK_HZ 150000000
+ #define HW_CFG_VPM_CLK_HZ 300000000
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_HW_CFG_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
new file mode 100644
index 00000000000..e01fc4607c9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -0,0 +1,246 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file intcHw_reg.h
+*
+* @brief platform specific interrupt controller bit assignments
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_REG_H
+#define _INTCHW_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/reg.h>
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define INTCHW_NUM_IRQ_PER_INTC 32 /* Maximum number of interrupt controllers */
+#define INTCHW_NUM_INTC 3
+
+/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
+#define INTCHW_INTC0 ((void *)MM_IO_BASE_INTC0)
+#define INTCHW_INTC1 ((void *)MM_IO_BASE_INTC1)
+#define INTCHW_SINTC ((void *)MM_IO_BASE_SINTC)
+
+/* INTC0 - interrupt controller 0 */
+#define INTCHW_INTC0_PIF_BITNUM 31 /* Peripheral interface interrupt */
+#define INTCHW_INTC0_CLCD_BITNUM 30 /* LCD Controller interrupt */
+#define INTCHW_INTC0_GE_BITNUM 29 /* Graphic engine interrupt */
+#define INTCHW_INTC0_APM_BITNUM 28 /* Audio process module interrupt */
+#define INTCHW_INTC0_ESW_BITNUM 27 /* Ethernet switch interrupt */
+#define INTCHW_INTC0_SPIH_BITNUM 26 /* SPI host interrupt */
+#define INTCHW_INTC0_TIMER3_BITNUM 25 /* Timer3 interrupt */
+#define INTCHW_INTC0_TIMER2_BITNUM 24 /* Timer2 interrupt */
+#define INTCHW_INTC0_TIMER1_BITNUM 23 /* Timer1 interrupt */
+#define INTCHW_INTC0_TIMER0_BITNUM 22 /* Timer0 interrupt */
+#define INTCHW_INTC0_SDIOH1_BITNUM 21 /* SDIO1 host interrupt */
+#define INTCHW_INTC0_SDIOH0_BITNUM 20 /* SDIO0 host interrupt */
+#define INTCHW_INTC0_USBD_BITNUM 19 /* USB device interrupt */
+#define INTCHW_INTC0_USBH1_BITNUM 18 /* USB1 host interrupt */
+#define INTCHW_INTC0_USBHD2_BITNUM 17 /* USB host2/device2 interrupt */
+#define INTCHW_INTC0_VPM_BITNUM 16 /* Voice process module interrupt */
+#define INTCHW_INTC0_DMA1C7_BITNUM 15 /* DMA1 channel 7 interrupt */
+#define INTCHW_INTC0_DMA1C6_BITNUM 14 /* DMA1 channel 6 interrupt */
+#define INTCHW_INTC0_DMA1C5_BITNUM 13 /* DMA1 channel 5 interrupt */
+#define INTCHW_INTC0_DMA1C4_BITNUM 12 /* DMA1 channel 4 interrupt */
+#define INTCHW_INTC0_DMA1C3_BITNUM 11 /* DMA1 channel 3 interrupt */
+#define INTCHW_INTC0_DMA1C2_BITNUM 10 /* DMA1 channel 2 interrupt */
+#define INTCHW_INTC0_DMA1C1_BITNUM 9 /* DMA1 channel 1 interrupt */
+#define INTCHW_INTC0_DMA1C0_BITNUM 8 /* DMA1 channel 0 interrupt */
+#define INTCHW_INTC0_DMA0C7_BITNUM 7 /* DMA0 channel 7 interrupt */
+#define INTCHW_INTC0_DMA0C6_BITNUM 6 /* DMA0 channel 6 interrupt */
+#define INTCHW_INTC0_DMA0C5_BITNUM 5 /* DMA0 channel 5 interrupt */
+#define INTCHW_INTC0_DMA0C4_BITNUM 4 /* DMA0 channel 4 interrupt */
+#define INTCHW_INTC0_DMA0C3_BITNUM 3 /* DMA0 channel 3 interrupt */
+#define INTCHW_INTC0_DMA0C2_BITNUM 2 /* DMA0 channel 2 interrupt */
+#define INTCHW_INTC0_DMA0C1_BITNUM 1 /* DMA0 channel 1 interrupt */
+#define INTCHW_INTC0_DMA0C0_BITNUM 0 /* DMA0 channel 0 interrupt */
+
+#define INTCHW_INTC0_PIF (1<<INTCHW_INTC0_PIF_BITNUM)
+#define INTCHW_INTC0_CLCD (1<<INTCHW_INTC0_CLCD_BITNUM)
+#define INTCHW_INTC0_GE (1<<INTCHW_INTC0_GE_BITNUM)
+#define INTCHW_INTC0_APM (1<<INTCHW_INTC0_APM_BITNUM)
+#define INTCHW_INTC0_ESW (1<<INTCHW_INTC0_ESW_BITNUM)
+#define INTCHW_INTC0_SPIH (1<<INTCHW_INTC0_SPIH_BITNUM)
+#define INTCHW_INTC0_TIMER3 (1<<INTCHW_INTC0_TIMER3_BITNUM)
+#define INTCHW_INTC0_TIMER2 (1<<INTCHW_INTC0_TIMER2_BITNUM)
+#define INTCHW_INTC0_TIMER1 (1<<INTCHW_INTC0_TIMER1_BITNUM)
+#define INTCHW_INTC0_TIMER0 (1<<INTCHW_INTC0_TIMER0_BITNUM)
+#define INTCHW_INTC0_SDIOH1 (1<<INTCHW_INTC0_SDIOH1_BITNUM)
+#define INTCHW_INTC0_SDIOH0 (1<<INTCHW_INTC0_SDIOH0_BITNUM)
+#define INTCHW_INTC0_USBD (1<<INTCHW_INTC0_USBD_BITNUM)
+#define INTCHW_INTC0_USBH1 (1<<INTCHW_INTC0_USBH1_BITNUM)
+#define INTCHW_INTC0_USBHD2 (1<<INTCHW_INTC0_USBHD2_BITNUM)
+#define INTCHW_INTC0_VPM (1<<INTCHW_INTC0_VPM_BITNUM)
+#define INTCHW_INTC0_DMA1C7 (1<<INTCHW_INTC0_DMA1C7_BITNUM)
+#define INTCHW_INTC0_DMA1C6 (1<<INTCHW_INTC0_DMA1C6_BITNUM)
+#define INTCHW_INTC0_DMA1C5 (1<<INTCHW_INTC0_DMA1C5_BITNUM)
+#define INTCHW_INTC0_DMA1C4 (1<<INTCHW_INTC0_DMA1C4_BITNUM)
+#define INTCHW_INTC0_DMA1C3 (1<<INTCHW_INTC0_DMA1C3_BITNUM)
+#define INTCHW_INTC0_DMA1C2 (1<<INTCHW_INTC0_DMA1C2_BITNUM)
+#define INTCHW_INTC0_DMA1C1 (1<<INTCHW_INTC0_DMA1C1_BITNUM)
+#define INTCHW_INTC0_DMA1C0 (1<<INTCHW_INTC0_DMA1C0_BITNUM)
+#define INTCHW_INTC0_DMA0C7 (1<<INTCHW_INTC0_DMA0C7_BITNUM)
+#define INTCHW_INTC0_DMA0C6 (1<<INTCHW_INTC0_DMA0C6_BITNUM)
+#define INTCHW_INTC0_DMA0C5 (1<<INTCHW_INTC0_DMA0C5_BITNUM)
+#define INTCHW_INTC0_DMA0C4 (1<<INTCHW_INTC0_DMA0C4_BITNUM)
+#define INTCHW_INTC0_DMA0C3 (1<<INTCHW_INTC0_DMA0C3_BITNUM)
+#define INTCHW_INTC0_DMA0C2 (1<<INTCHW_INTC0_DMA0C2_BITNUM)
+#define INTCHW_INTC0_DMA0C1 (1<<INTCHW_INTC0_DMA0C1_BITNUM)
+#define INTCHW_INTC0_DMA0C0 (1<<INTCHW_INTC0_DMA0C0_BITNUM)
+
+/* INTC1 - interrupt controller 1 */
+#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMT_BITNUM 26 /* DDR and VPM HW phase align timeout interrupt (Not for A0) */
+#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_RTC2_BITNUM 25 /* Real time clock tamper interrupt */
+#define INTCHW_INTC1_VDEC_BITNUM 24 /* Hantro Video Decoder interrupt */
+/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
+#define INTCHW_INTC1_SPUM_BITNUM 23 /* Secure process module interrupt */
+#define INTCHW_INTC1_RTC1_BITNUM 22 /* Real time clock one-shot interrupt */
+#define INTCHW_INTC1_RTC0_BITNUM 21 /* Real time clock periodic interrupt */
+#define INTCHW_INTC1_RNG_BITNUM 20 /* Random number generator interrupt */
+#define INTCHW_INTC1_FMPU_BITNUM 19 /* Flash memory parition unit interrupt */
+#define INTCHW_INTC1_VMPU_BITNUM 18 /* VRAM memory partition interrupt */
+#define INTCHW_INTC1_DMPU_BITNUM 17 /* DDR2 memory partition interrupt */
+#define INTCHW_INTC1_KEYC_BITNUM 16 /* Key pad controller interrupt */
+#define INTCHW_INTC1_TSC_BITNUM 15 /* Touch screen controller interrupt */
+#define INTCHW_INTC1_UART0_BITNUM 14 /* UART 0 */
+#define INTCHW_INTC1_WDOG_BITNUM 13 /* Watchdog timer interrupt */
+
+#define INTCHW_INTC1_UART1_BITNUM 12 /* UART 1 */
+#define INTCHW_INTC1_PMUIRQ_BITNUM 11 /* ARM performance monitor interrupt */
+#define INTCHW_INTC1_COMMRX_BITNUM 10 /* ARM DDC receive interrupt */
+#define INTCHW_INTC1_COMMTX_BITNUM 9 /* ARM DDC transmit interrupt */
+#define INTCHW_INTC1_FLASHC_BITNUM 8 /* Flash controller interrupt */
+#define INTCHW_INTC1_GPHY_BITNUM 7 /* Gigabit Phy interrupt */
+#define INTCHW_INTC1_SPIS_BITNUM 6 /* SPI slave interrupt */
+#define INTCHW_INTC1_I2CS_BITNUM 5 /* I2C slave interrupt */
+#define INTCHW_INTC1_I2CH_BITNUM 4 /* I2C host interrupt */
+#define INTCHW_INTC1_I2S1_BITNUM 3 /* I2S1 interrupt */
+#define INTCHW_INTC1_I2S0_BITNUM 2 /* I2S0 interrupt */
+#define INTCHW_INTC1_GPIO1_BITNUM 1 /* GPIO bit 64//32 combined interrupt */
+#define INTCHW_INTC1_GPIO0_BITNUM 0 /* GPIO bit 31//0 combined interrupt */
+
+#define INTCHW_INTC1_DDRVPMT (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
+#define INTCHW_INTC1_DDRVPMP (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
+#define INTCHW_INTC1_DDRP (1<<INTCHW_INTC1_DDRP_BITNUM)
+#define INTCHW_INTC1_VDEC (1<<INTCHW_INTC1_VDEC_BITNUM)
+#define INTCHW_INTC1_SPUM (1<<INTCHW_INTC1_SPUM_BITNUM)
+#define INTCHW_INTC1_RTC2 (1<<INTCHW_INTC1_RTC2_BITNUM)
+#define INTCHW_INTC1_RTC1 (1<<INTCHW_INTC1_RTC1_BITNUM)
+#define INTCHW_INTC1_RTC0 (1<<INTCHW_INTC1_RTC0_BITNUM)
+#define INTCHW_INTC1_RNG (1<<INTCHW_INTC1_RNG_BITNUM)
+#define INTCHW_INTC1_FMPU (1<<INTCHW_INTC1_FMPU_BITNUM)
+#define INTCHW_INTC1_IMPU (1<<INTCHW_INTC1_IMPU_BITNUM)
+#define INTCHW_INTC1_DMPU (1<<INTCHW_INTC1_DMPU_BITNUM)
+#define INTCHW_INTC1_KEYC (1<<INTCHW_INTC1_KEYC_BITNUM)
+#define INTCHW_INTC1_TSC (1<<INTCHW_INTC1_TSC_BITNUM)
+#define INTCHW_INTC1_UART0 (1<<INTCHW_INTC1_UART0_BITNUM)
+#define INTCHW_INTC1_WDOG (1<<INTCHW_INTC1_WDOG_BITNUM)
+#define INTCHW_INTC1_UART1 (1<<INTCHW_INTC1_UART1_BITNUM)
+#define INTCHW_INTC1_PMUIRQ (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
+#define INTCHW_INTC1_COMMRX (1<<INTCHW_INTC1_COMMRX_BITNUM)
+#define INTCHW_INTC1_COMMTX (1<<INTCHW_INTC1_COMMTX_BITNUM)
+#define INTCHW_INTC1_FLASHC (1<<INTCHW_INTC1_FLASHC_BITNUM)
+#define INTCHW_INTC1_GPHY (1<<INTCHW_INTC1_GPHY_BITNUM)
+#define INTCHW_INTC1_SPIS (1<<INTCHW_INTC1_SPIS_BITNUM)
+#define INTCHW_INTC1_I2CS (1<<INTCHW_INTC1_I2CS_BITNUM)
+#define INTCHW_INTC1_I2CH (1<<INTCHW_INTC1_I2CH_BITNUM)
+#define INTCHW_INTC1_I2S1 (1<<INTCHW_INTC1_I2S1_BITNUM)
+#define INTCHW_INTC1_I2S0 (1<<INTCHW_INTC1_I2S0_BITNUM)
+#define INTCHW_INTC1_GPIO1 (1<<INTCHW_INTC1_GPIO1_BITNUM)
+#define INTCHW_INTC1_GPIO0 (1<<INTCHW_INTC1_GPIO0_BITNUM)
+
+/* SINTC secure int controller */
+#define INTCHW_SINTC_RTC2_BITNUM 15 /* Real time clock tamper interrupt */
+#define INTCHW_SINTC_TIMER3_BITNUM 14 /* Secure timer3 interrupt */
+#define INTCHW_SINTC_TIMER2_BITNUM 13 /* Secure timer2 interrupt */
+#define INTCHW_SINTC_TIMER1_BITNUM 12 /* Secure timer1 interrupt */
+#define INTCHW_SINTC_TIMER0_BITNUM 11 /* Secure timer0 interrupt */
+#define INTCHW_SINTC_SPUM_BITNUM 10 /* Secure process module interrupt */
+#define INTCHW_SINTC_RTC1_BITNUM 9 /* Real time clock one-shot interrupt */
+#define INTCHW_SINTC_RTC0_BITNUM 8 /* Real time clock periodic interrupt */
+#define INTCHW_SINTC_RNG_BITNUM 7 /* Random number generator interrupt */
+#define INTCHW_SINTC_FMPU_BITNUM 6 /* Flash memory parition unit interrupt */
+#define INTCHW_SINTC_VMPU_BITNUM 5 /* VRAM memory partition interrupt */
+#define INTCHW_SINTC_DMPU_BITNUM 4 /* DDR2 memory partition interrupt */
+#define INTCHW_SINTC_KEYC_BITNUM 3 /* Key pad controller interrupt */
+#define INTCHW_SINTC_TSC_BITNUM 2 /* Touch screen controller interrupt */
+#define INTCHW_SINTC_UART0_BITNUM 1 /* UART0 interrupt */
+#define INTCHW_SINTC_WDOG_BITNUM 0 /* Watchdog timer interrupt */
+
+#define INTCHW_SINTC_TIMER3 (1<<INTCHW_SINTC_TIMER3_BITNUM)
+#define INTCHW_SINTC_TIMER2 (1<<INTCHW_SINTC_TIMER2_BITNUM)
+#define INTCHW_SINTC_TIMER1 (1<<INTCHW_SINTC_TIMER1_BITNUM)
+#define INTCHW_SINTC_TIMER0 (1<<INTCHW_SINTC_TIMER0_BITNUM)
+#define INTCHW_SINTC_SPUM (1<<INTCHW_SINTC_SPUM_BITNUM)
+#define INTCHW_SINTC_RTC2 (1<<INTCHW_SINTC_RTC2_BITNUM)
+#define INTCHW_SINTC_RTC1 (1<<INTCHW_SINTC_RTC1_BITNUM)
+#define INTCHW_SINTC_RTC0 (1<<INTCHW_SINTC_RTC0_BITNUM)
+#define INTCHW_SINTC_RNG (1<<INTCHW_SINTC_RNG_BITNUM)
+#define INTCHW_SINTC_FMPU (1<<INTCHW_SINTC_FMPU_BITNUM)
+#define INTCHW_SINTC_IMPU (1<<INTCHW_SINTC_IMPU_BITNUM)
+#define INTCHW_SINTC_DMPU (1<<INTCHW_SINTC_DMPU_BITNUM)
+#define INTCHW_SINTC_KEYC (1<<INTCHW_SINTC_KEYC_BITNUM)
+#define INTCHW_SINTC_TSC (1<<INTCHW_SINTC_TSC_BITNUM)
+#define INTCHW_SINTC_UART0 (1<<INTCHW_SINTC_UART0_BITNUM)
+#define INTCHW_SINTC_WDOG (1<<INTCHW_SINTC_WDOG_BITNUM)
+
+/* PL192 Vectored Interrupt Controller (VIC) layout */
+#define INTCHW_IRQSTATUS 0x00 /* IRQ status register */
+#define INTCHW_FIQSTATUS 0x04 /* FIQ status register */
+#define INTCHW_RAWINTR 0x08 /* Raw Interrupt Status register */
+#define INTCHW_INTSELECT 0x0c /* Interrupt Select Register */
+#define INTCHW_INTENABLE 0x10 /* Interrupt Enable Register */
+#define INTCHW_INTENCLEAR 0x14 /* Interrupt Enable Clear Register */
+#define INTCHW_SOFTINT 0x18 /* Soft Interrupt Register */
+#define INTCHW_SOFTINTCLEAR 0x1c /* Soft Interrupt Clear Register */
+#define INTCHW_PROTECTION 0x20 /* Protection Enable Register */
+#define INTCHW_SWPRIOMASK 0x24 /* Software Priority Mask Register */
+#define INTCHW_PRIODAISY 0x28 /* Priority Daisy Chain Register */
+#define INTCHW_VECTADDR0 0x100 /* Vector Address Registers */
+#define INTCHW_VECTPRIO0 0x200 /* Vector Priority Registers 0-31 */
+#define INTCHW_ADDRESS 0xf00 /* Vector Address Register 0-31 */
+#define INTCHW_PID 0xfe0 /* Peripheral ID Register 0-3 */
+#define INTCHW_PCELLID 0xff0 /* PrimeCell ID Register 0-3 */
+
+/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/* intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/* uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
+/* uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+/* Clear one or more IRQ interrupts. */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask)
+{
+ __REG32(basep + INTCHW_INTENCLEAR) = mask;
+}
+
+/* Enables one or more IRQ interrupts. */
+static inline void intcHw_irq_enable(void *basep, uint32_t mask)
+{
+ __REG32(basep + INTCHW_INTENABLE) = mask;
+}
+
+#endif /* _INTCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
new file mode 100644
index 00000000000..86bb58d4f58
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -0,0 +1,101 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file mm_addr.h
+*
+* @brief Memory Map address defintions
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _MM_ADDR_H
+#define _MM_ADDR_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/* Memory Map address definitions */
+
+#define MM_ADDR_DDR 0x00000000
+
+#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000 /* 16 MB - Reserved external memory for VPM use */
+
+#define MM_ADDR_IO_FLASHC 0x20000000
+#define MM_ADDR_IO_BROM 0x30000000
+#define MM_ADDR_IO_ARAM 0x30100000 /* 64 KB - extra cycle latency - WS switch */
+#define MM_ADDR_IO_DMA0 0x30200000
+#define MM_ADDR_IO_DMA1 0x30300000
+#define MM_ADDR_IO_ESW 0x30400000
+#define MM_ADDR_IO_CLCD 0x30500000
+#define MM_ADDR_IO_PIF 0x30580000
+#define MM_ADDR_IO_APM 0x30600000
+#define MM_ADDR_IO_SPUM 0x30700000
+#define MM_ADDR_IO_VPM_PROG 0x30800000
+#define MM_ADDR_IO_VPM_DATA 0x30A00000
+#define MM_ADDR_IO_VRAM 0x40000000 /* 64 KB - security block in front of it */
+#define MM_ADDR_IO_CHIPC 0x80000000
+#define MM_ADDR_IO_UMI 0x80001000
+#define MM_ADDR_IO_NAND 0x80001800
+#define MM_ADDR_IO_LEDM 0x80002000
+#define MM_ADDR_IO_PWM 0x80002040
+#define MM_ADDR_IO_VINTC 0x80003000
+#define MM_ADDR_IO_GPIO0 0x80004000
+#define MM_ADDR_IO_GPIO1 0x80004800
+#define MM_ADDR_IO_I2CS 0x80005000
+#define MM_ADDR_IO_SPIS 0x80006000
+#define MM_ADDR_IO_HPM 0x80007400
+#define MM_ADDR_IO_HPM_REMAP 0x80007800
+#define MM_ADDR_IO_TZPC 0x80008000
+#define MM_ADDR_IO_MPU 0x80009000
+#define MM_ADDR_IO_SPUMP 0x8000a000
+#define MM_ADDR_IO_PKA 0x8000b000
+#define MM_ADDR_IO_RNG 0x8000c000
+#define MM_ADDR_IO_KEYC 0x8000d000
+#define MM_ADDR_IO_BBL 0x8000e000
+#define MM_ADDR_IO_OTP 0x8000f000
+#define MM_ADDR_IO_I2S0 0x80010000
+#define MM_ADDR_IO_I2S1 0x80011000
+#define MM_ADDR_IO_UARTA 0x80012000
+#define MM_ADDR_IO_UARTB 0x80013000
+#define MM_ADDR_IO_I2CH 0x80014020
+#define MM_ADDR_IO_SPIH 0x80015000
+#define MM_ADDR_IO_TSC 0x80016000
+#define MM_ADDR_IO_TMR 0x80017000
+#define MM_ADDR_IO_WATCHDOG 0x80017800
+#define MM_ADDR_IO_ETM 0x80018000
+#define MM_ADDR_IO_DDRC 0x80019000
+#define MM_ADDR_IO_SINTC 0x80100000
+#define MM_ADDR_IO_INTC0 0x80200000
+#define MM_ADDR_IO_INTC1 0x80201000
+#define MM_ADDR_IO_GE 0x80300000
+#define MM_ADDR_IO_USB_CTLR0 0x80400000
+#define MM_ADDR_IO_USB_CTLR1 0x80410000
+#define MM_ADDR_IO_USB_PHY 0x80420000
+#define MM_ADDR_IO_SDIOH0 0x80500000
+#define MM_ADDR_IO_SDIOH1 0x80600000
+#define MM_ADDR_IO_VDEC 0x80700000
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_ADDR_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
new file mode 100644
index 00000000000..de92ec6a01a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
@@ -0,0 +1,147 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file mm_io.h
+*
+* @brief Memory Map I/O definitions
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _MM_IO_H
+#define _MM_IO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/mm_addr.h>
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(CONFIG_MMU)
+
+/* This macro is referenced in <mach/io.h>
+ * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
+ * This macro is referenced in <asm/arch/io.h>
+ *
+ * Assume VPM address is the last x MB of memory. For VPM, map to
+ * 0xf0000000 and up.
+ */
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#ifdef __ASSEMBLY__
+#define MM_IO_PHYS_TO_VIRT(phys) (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
+#else
+#define MM_IO_PHYS_TO_VIRT(phys) (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
+ (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
+#endif
+#endif
+
+/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#ifdef __ASSEMBLY__
+#define MM_IO_VIRT_TO_PHYS(virt) ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
+#else
+#define MM_IO_VIRT_TO_PHYS(virt) (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
+ ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
+#endif
+#endif
+
+#else
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#define MM_IO_PHYS_TO_VIRT(phys) (phys)
+#endif
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#define MM_IO_VIRT_TO_PHYS(virt) (virt)
+#endif
+
+#endif
+
+/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
+#define MM_IO_BASE_FLASHC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
+#define MM_IO_BASE_NAND MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
+#define MM_IO_BASE_UMI MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
+
+#define MM_IO_START MM_ADDR_IO_FLASHC /* Physical beginning of IO mapped memory */
+#define MM_IO_BASE MM_IO_BASE_FLASHC /* Virtual beginning of IO mapped memory */
+
+#define MM_IO_BASE_BROM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
+#define MM_IO_BASE_ARAM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
+#define MM_IO_BASE_DMA0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
+#define MM_IO_BASE_DMA1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
+#define MM_IO_BASE_ESW MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
+#define MM_IO_BASE_CLCD MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
+#define MM_IO_BASE_PIF MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
+#define MM_IO_BASE_APM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
+#define MM_IO_BASE_SPUM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
+#define MM_IO_BASE_VPM_PROG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
+#define MM_IO_BASE_VPM_DATA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
+
+#define MM_IO_BASE_VRAM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
+
+#define MM_IO_BASE_CHIPC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
+#define MM_IO_BASE_DDRC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
+#define MM_IO_BASE_LEDM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
+#define MM_IO_BASE_PWM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
+#define MM_IO_BASE_VINTC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
+#define MM_IO_BASE_GPIO0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
+#define MM_IO_BASE_GPIO1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
+#define MM_IO_BASE_TMR MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
+#define MM_IO_BASE_WATCHDOG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
+#define MM_IO_BASE_ETM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
+#define MM_IO_BASE_HPM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
+#define MM_IO_BASE_HPM_REMAP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
+#define MM_IO_BASE_TZPC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
+#define MM_IO_BASE_MPU MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
+#define MM_IO_BASE_SPUMP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
+#define MM_IO_BASE_PKA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
+#define MM_IO_BASE_RNG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
+#define MM_IO_BASE_KEYC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
+#define MM_IO_BASE_BBL MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
+#define MM_IO_BASE_OTP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
+#define MM_IO_BASE_I2S0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
+#define MM_IO_BASE_I2S1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
+#define MM_IO_BASE_UARTA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
+#define MM_IO_BASE_UARTB MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
+#define MM_IO_BASE_I2CH MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
+#define MM_IO_BASE_SPIH MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
+#define MM_IO_BASE_TSC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
+#define MM_IO_BASE_I2CS MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
+#define MM_IO_BASE_SPIS MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
+#define MM_IO_BASE_SINTC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
+#define MM_IO_BASE_INTC0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
+#define MM_IO_BASE_INTC1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
+#define MM_IO_BASE_GE MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
+#define MM_IO_BASE_USB_CTLR0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
+#define MM_IO_BASE_USB_CTLR1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
+#define MM_IO_BASE_USB_PHY MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
+#define MM_IO_BASE_SDIOH0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
+#define MM_IO_BASE_SDIOH1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
+#define MM_IO_BASE_VDEC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
+
+#define MM_IO_BASE_VPM_EXTMEM_RSVD MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_IO_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
new file mode 100644
index 00000000000..d15f5f3ec2d
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
@@ -0,0 +1,100 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file secHw_def.h
+*
+* @brief Definitions for configuring/testing secure blocks
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_DEF_H
+#define SECHW_DEF_H
+
+#include <mach/csp/mm_io.h>
+
+/* Bit mask for various secure device */
+#define secHw_BLK_MASK_CHIP_CONTROL 0x00000001
+#define secHw_BLK_MASK_KEY_SCAN 0x00000002
+#define secHw_BLK_MASK_TOUCH_SCREEN 0x00000004
+#define secHw_BLK_MASK_UART0 0x00000008
+#define secHw_BLK_MASK_UART1 0x00000010
+#define secHw_BLK_MASK_WATCHDOG 0x00000020
+#define secHw_BLK_MASK_SPUM 0x00000040
+#define secHw_BLK_MASK_DDR2 0x00000080
+#define secHw_BLK_MASK_EXT_MEM 0x00000100
+#define secHw_BLK_MASK_ESW 0x00000200
+#define secHw_BLK_MASK_SPU 0x00010000
+#define secHw_BLK_MASK_PKA 0x00020000
+#define secHw_BLK_MASK_RNG 0x00040000
+#define secHw_BLK_MASK_RTC 0x00080000
+#define secHw_BLK_MASK_OTP 0x00100000
+#define secHw_BLK_MASK_BOOT 0x00200000
+#define secHw_BLK_MASK_MPU 0x00400000
+#define secHw_BLK_MASK_TZCTRL 0x00800000
+#define secHw_BLK_MASK_INTR 0x01000000
+
+/* Trustzone register set */
+typedef struct {
+ volatile uint32_t status; /* read only - reflects status of writes of 2 write registers */
+ volatile uint32_t setUnsecure; /* write only. reads back as 0 */
+ volatile uint32_t setSecure; /* write only. reads back as 0 */
+} secHw_TZREG_t;
+
+/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
+/* is for the higher 16 bits. */
+
+typedef enum {
+ secHw_IDX_LS = 0,
+ secHw_IDX_MS = 1,
+ secHw_IDX_NUM
+} secHw_IDX_e;
+
+typedef struct {
+ volatile secHw_TZREG_t reg[secHw_IDX_NUM];
+} secHw_REGS_t;
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void);
+
+#include <mach/csp/secHw_inline.h>
+
+#endif /* SECHW_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
new file mode 100644
index 00000000000..9cd6a032ab7
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
@@ -0,0 +1,79 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file secHw_inline.h
+*
+* @brief Definitions for configuring/testing secure blocks
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_INLINE_H
+#define SECHW_INLINE_H
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ ) {
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ if (mask & 0x0000FFFF) {
+ regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
+ }
+
+ if (mask & 0xFFFF0000) {
+ regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ ) {
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ if (mask & 0x0000FFFF) {
+ regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+ }
+ if (mask & 0xFFFF0000) {
+ regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void)
+{
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ return (regp->reg[1].status << 16) + regp->reg[0].status;
+}
+
+#endif /* SECHW_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
new file mode 100644
index 00000000000..3080ac7239a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
@@ -0,0 +1,82 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file tmrHw_reg.h
+*
+* @brief Definitions for low level Timer registers
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_REG_H
+#define _TMRHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <mach/csp/hw_cfg.h>
+/* Base address */
+#define tmrHw_MODULE_BASE_ADDR MM_IO_BASE_TMR
+
+/*
+This platform has four different timers running at different clock speed
+
+Timer one (Timer ID 0) runs at 25 MHz
+Timer two (Timer ID 1) runs at 25 MHz
+Timer three (Timer ID 2) runs at 150 MHz
+Timer four (Timer ID 3) runs at 150 MHz
+*/
+#define tmrHw_LOW_FREQUENCY_MHZ 25 /* Always 25MHz from XTAL */
+#define tmrHw_LOW_FREQUENCY_HZ 25000000
+
+#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
+#define tmrHw_HIGH_FREQUENCY_MHZ 150 /* Always 150MHz for FPGA */
+#define tmrHw_HIGH_FREQUENCY_HZ 150000000
+#else
+#define tmrHw_HIGH_FREQUENCY_HZ HW_CFG_BUS_CLK_HZ
+#define tmrHw_HIGH_FREQUENCY_MHZ (HW_CFG_BUS_CLK_HZ / 1000000)
+#endif
+
+#define tmrHw_LOW_RESOLUTION_CLOCK tmrHw_LOW_FREQUENCY_HZ
+#define tmrHw_HIGH_RESOLUTION_CLOCK tmrHw_HIGH_FREQUENCY_HZ
+#define tmrHw_MAX_COUNT (0xFFFFFFFF) /* maximum number of count a timer can count */
+#define tmrHw_TIMER_NUM_COUNT (4) /* Number of timer module supported */
+
+typedef struct {
+ uint32_t LoadValue; /* Load value for timer */
+ uint32_t CurrentValue; /* Current value for timer */
+ uint32_t Control; /* Control register */
+ uint32_t InterruptClear; /* Interrupt clear register */
+ uint32_t RawInterruptStatus; /* Raw interrupt status */
+ uint32_t InterruptStatus; /* Masked interrupt status */
+ uint32_t BackgroundLoad; /* Background load value */
+ uint32_t padding; /* Padding register */
+} tmrHw_REG_t;
+
+/* Control bot masks */
+#define tmrHw_CONTROL_TIMER_ENABLE 0x00000080
+#define tmrHw_CONTROL_PERIODIC 0x00000040
+#define tmrHw_CONTROL_INTERRUPT_ENABLE 0x00000020
+#define tmrHw_CONTROL_PRESCALE_MASK 0x0000000C
+#define tmrHw_CONTROL_PRESCALE_1 0x00000000
+#define tmrHw_CONTROL_PRESCALE_16 0x00000004
+#define tmrHw_CONTROL_PRESCALE_256 0x00000008
+#define tmrHw_CONTROL_32BIT 0x00000002
+#define tmrHw_CONTROL_ONESHOT 0x00000001
+#define tmrHw_CONTROL_FREE_RUNNING 0x00000000
+
+#define tmrHw_CONTROL_MODE_MASK (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
+
+#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
+
+#endif /* _TMRHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
new file mode 100644
index 00000000000..847980c85c8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -0,0 +1,826 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dma.h
+*
+* @brief API definitions for the linux DMA interface.
+*/
+/****************************************************************************/
+
+#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
+#define ASM_ARM_ARCH_BCMRING_DMA_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/semaphore.h>
+#include <csp/dmacHw.h>
+#include <mach/timer.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
+/* and line number of the reservation request will be recorded in the channel table */
+
+#define DMA_DEBUG_TRACK_RESERVATION 1
+
+#define DMA_NUM_CONTROLLERS 2
+#define DMA_NUM_CHANNELS 8 /* per controller */
+
+typedef enum {
+ DMA_DEVICE_MEM_TO_MEM, /* For memory to memory transfers */
+ DMA_DEVICE_I2S0_DEV_TO_MEM,
+ DMA_DEVICE_I2S0_MEM_TO_DEV,
+ DMA_DEVICE_I2S1_DEV_TO_MEM,
+ DMA_DEVICE_I2S1_MEM_TO_DEV,
+ DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
+ DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
+ DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
+ DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
+ DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM, /* Additional mic input for beam-forming */
+ DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
+ DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
+ DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
+ DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
+ DMA_DEVICE_SPUM_DEV_TO_MEM,
+ DMA_DEVICE_SPUM_MEM_TO_DEV,
+ DMA_DEVICE_SPIH_DEV_TO_MEM,
+ DMA_DEVICE_SPIH_MEM_TO_DEV,
+ DMA_DEVICE_UART_A_DEV_TO_MEM,
+ DMA_DEVICE_UART_A_MEM_TO_DEV,
+ DMA_DEVICE_UART_B_DEV_TO_MEM,
+ DMA_DEVICE_UART_B_MEM_TO_DEV,
+ DMA_DEVICE_PIF_MEM_TO_DEV,
+ DMA_DEVICE_PIF_DEV_TO_MEM,
+ DMA_DEVICE_ESW_DEV_TO_MEM,
+ DMA_DEVICE_ESW_MEM_TO_DEV,
+ DMA_DEVICE_VPM_MEM_TO_MEM,
+ DMA_DEVICE_CLCD_MEM_TO_MEM,
+ DMA_DEVICE_NAND_MEM_TO_MEM,
+ DMA_DEVICE_MEM_TO_VRAM,
+ DMA_DEVICE_VRAM_TO_MEM,
+
+ /* Add new entries before this line. */
+
+ DMA_NUM_DEVICE_ENTRIES,
+ DMA_DEVICE_NONE = 0xff, /* Special value to indicate that no device is currently assigned. */
+
+} DMA_Device_t;
+
+/****************************************************************************
+*
+* The DMA_Handle_t is the primary object used by callers of the API.
+*
+*****************************************************************************/
+
+#define DMA_INVALID_HANDLE ((DMA_Handle_t) -1)
+
+typedef int DMA_Handle_t;
+
+/****************************************************************************
+*
+* The DMA_DescriptorRing_t contains a ring of descriptors which is used
+* to point to regions of memory.
+*
+*****************************************************************************/
+
+typedef struct {
+ void *virtAddr; /* Virtual Address of the descriptor ring */
+ dma_addr_t physAddr; /* Physical address of the descriptor ring */
+ int descriptorsAllocated; /* Number of descriptors allocated in the descriptor ring */
+ size_t bytesAllocated; /* Number of bytes allocated in the descriptor ring */
+
+} DMA_DescriptorRing_t;
+
+/****************************************************************************
+*
+* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
+* DMA chains from a variety of memory sources.
+*
+*****************************************************************************/
+
+#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */
+ /* off not being DMA'd. */
+
+typedef enum {
+ DMA_MEM_TYPE_NONE, /* Not a valid setting */
+ DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */
+ DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */
+ DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */
+ DMA_MEM_TYPE_USER, /* Memory came from user space. */
+
+} DMA_MemType_t;
+
+/* A segment represents a physically and virtually contiguous chunk of memory. */
+/* i.e. each segment can be DMA'd */
+/* A user of the DMA code will add memory regions. Each region may need to be */
+/* represented by one or more segments. */
+
+typedef struct {
+ void *virtAddr; /* Virtual address used for this segment */
+ dma_addr_t physAddr; /* Physical address this segment maps to */
+ size_t numBytes; /* Size of the segment, in bytes */
+
+} DMA_Segment_t;
+
+/* A region represents a virtually contiguous chunk of memory, which may be */
+/* made up of multiple segments. */
+
+typedef struct {
+ DMA_MemType_t memType;
+ void *virtAddr;
+ size_t numBytes;
+
+ /* Each region (virtually contiguous) consists of one or more segments. Each */
+ /* segment is virtually and physically contiguous. */
+
+ int numSegmentsUsed;
+ int numSegmentsAllocated;
+ DMA_Segment_t *segment;
+
+ /* When a region corresponds to user memory, we need to lock all of the pages */
+ /* down before we can figure out the physical addresses. The lockedPage array contains */
+ /* the pages that were locked, and which subsequently need to be unlocked once the */
+ /* memory is unmapped. */
+
+ unsigned numLockedPages;
+ struct page **lockedPages;
+
+} DMA_Region_t;
+
+typedef struct {
+ int inUse; /* Is this mapping currently being used? */
+ struct semaphore lock; /* Acquired when using this structure */
+ enum dma_data_direction dir; /* Direction this transfer is intended for */
+
+ /* In the event that we're mapping user memory, we need to know which task */
+ /* the memory is for, so that we can obtain the correct mm locks. */
+
+ struct task_struct *userTask;
+
+ int numRegionsUsed;
+ int numRegionsAllocated;
+ DMA_Region_t *region;
+
+} DMA_MemMap_t;
+
+/****************************************************************************
+*
+* The DMA_DeviceAttribute_t contains information which describes a
+* particular DMA device (or peripheral).
+*
+* It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
+* statically initialized.
+*
+*****************************************************************************/
+
+/* The device handler is called whenever a DMA operation completes. The reaon */
+/* for it to be called will be a bitmask with one or more of the following bits */
+/* set. */
+
+#define DMA_HANDLER_REASON_BLOCK_COMPLETE dmacHw_INTERRUPT_STATUS_BLOCK
+#define DMA_HANDLER_REASON_TRANSFER_COMPLETE dmacHw_INTERRUPT_STATUS_TRANS
+#define DMA_HANDLER_REASON_ERROR dmacHw_INTERRUPT_STATUS_ERROR
+
+typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
+ void *userData);
+
+#define DMA_DEVICE_FLAG_ON_DMA0 0x00000001
+#define DMA_DEVICE_FLAG_ON_DMA1 0x00000002
+#define DMA_DEVICE_FLAG_PORT_PER_DMAC 0x00000004 /* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
+#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST 0x00000008 /* If set, allocate from DMA1 before allocating from DMA0 */
+#define DMA_DEVICE_FLAG_IS_DEDICATED 0x00000100
+#define DMA_DEVICE_FLAG_NO_ISR 0x00000200
+#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO 0x00000400
+#define DMA_DEVICE_FLAG_IN_USE 0x00000800 /* If set, device is in use on a channel */
+
+/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
+/* determine which DMA controllers a given device can be used from, and the interface */
+/* array determeines the actual interface number to use for a given controller. */
+
+typedef struct {
+ uint32_t flags; /* Bitmask of DMA_DEVICE_FLAG_xxx constants */
+ uint8_t dedicatedController; /* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+ uint8_t dedicatedChannel; /* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+ const char *name; /* Will show up in the /proc entry */
+
+ uint32_t dmacPort[DMA_NUM_CONTROLLERS]; /* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
+
+ dmacHw_CONFIG_t config; /* Configuration to use when DMA'ing using this device */
+
+ void *userData; /* Passed to the devHandler */
+ DMA_DeviceHandler_t devHandler; /* Called when DMA operations finish. */
+
+ timer_tick_count_t transferStartTime; /* Time the current transfer was started */
+
+ /* The following statistical information will be collected and presented in a proc entry. */
+ /* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
+ /* a 64 bit counter. */
+
+ uint64_t numTransfers; /* Number of DMA transfers performed */
+ uint64_t transferTicks; /* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
+ uint64_t transferBytes; /* Total bytes transferred */
+ uint32_t timesBlocked; /* Number of times a channel was unavailable */
+ uint32_t numBytes; /* Last transfer size */
+
+ /* It's not possible to free memory which is allocated for the descriptors from within */
+ /* the ISR. So make the presumption that a given device will tend to use the */
+ /* same sized buffers over and over again, and we keep them around. */
+
+ DMA_DescriptorRing_t ring; /* Ring of descriptors allocated for this device */
+
+ /* We stash away some of the information from the previous transfer. If back-to-back */
+ /* transfers are performed from the same buffer, then we don't have to keep re-initializing */
+ /* the descriptor buffers. */
+
+ uint32_t prevNumBytes;
+ dma_addr_t prevSrcData;
+ dma_addr_t prevDstData;
+
+} DMA_DeviceAttribute_t;
+
+/****************************************************************************
+*
+* DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
+* data structures and don't belong in this header file, but are included
+* merely for discussion.
+*
+* By the time this is implemented, these structures will be moved out into
+* the appropriate C source file instead.
+*
+*****************************************************************************/
+
+/****************************************************************************
+*
+* The DMA_Channel_t contains state information about each DMA channel. Some
+* of the channels are dedicated. Non-dedicated channels are shared
+* amongst the other devices.
+*
+*****************************************************************************/
+
+#define DMA_CHANNEL_FLAG_IN_USE 0x00000001
+#define DMA_CHANNEL_FLAG_IS_DEDICATED 0x00000002
+#define DMA_CHANNEL_FLAG_NO_ISR 0x00000004
+#define DMA_CHANNEL_FLAG_LARGE_FIFO 0x00000008
+
+typedef struct {
+ uint32_t flags; /* bitmask of DMA_CHANNEL_FLAG_xxx constants */
+ DMA_Device_t devType; /* Device this channel is currently reserved for */
+ DMA_Device_t lastDevType; /* Device type that used this previously */
+ char name[20]; /* Name passed onto request_irq */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ const char *fileName; /* Place where channel reservation took place */
+ int lineNum; /* Place where channel reservation took place */
+#endif
+ dmacHw_HANDLE_t dmacHwHandle; /* low level channel handle. */
+
+} DMA_Channel_t;
+
+/****************************************************************************
+*
+* The DMA_Controller_t contains state information about each DMA controller.
+*
+* The freeChannelQ is stored in the controller data structure rather than
+* the channel data structure since several of the devices are accessible
+* from multiple controllers, and there is no way to know which controller
+* will become available first.
+*
+*****************************************************************************/
+
+typedef struct {
+ DMA_Channel_t channel[DMA_NUM_CHANNELS];
+
+} DMA_Controller_t;
+
+/****************************************************************************
+*
+* The DMA_Global_t contains all of the global state information used by
+* the DMA code.
+*
+* Callers which need to allocate a shared channel will be queued up
+* on the freeChannelQ until a channel becomes available.
+*
+*****************************************************************************/
+
+typedef struct {
+ struct semaphore lock; /* acquired when manipulating table entries */
+ wait_queue_head_t freeChannelQ;
+
+ DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
+
+} DMA_Global_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+
+extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
+
+/* ---- Function Prototypes ---------------------------------------------- */
+
+#if defined(__KERNEL__)
+
+/****************************************************************************/
+/**
+* Initializes the DMA module.
+*
+* @return
+* 0 - Success
+* < 0 - Error
+*/
+/****************************************************************************/
+
+int dma_init(void);
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
+ int lineNum);
+#define dma_request_channel(dev) dma_request_channel_dbg(dev, __FILE__, __LINE__)
+#else
+
+/****************************************************************************/
+/**
+* Reserves a channel for use with @a dev. If the device is setup to use
+* a shared channel, then this function will block until a free channel
+* becomes available.
+*
+* @return
+* >= 0 - A valid DMA Handle.
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+DMA_Handle_t dma_request_channel(DMA_Device_t dev /* Device to use with the allocated channel. */
+ );
+#endif
+
+/****************************************************************************/
+/**
+* Frees a previously allocated DMA Handle.
+*
+* @return
+* 0 - DMA Handle was released successfully.
+* -EINVAL - Invalid DMA handle
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t channel /* DMA handle. */
+ );
+
+/****************************************************************************/
+/**
+* Determines if a given device has been configured as using a shared
+* channel.
+*
+* @return boolean
+* 0 Device uses a dedicated channel
+* non-zero Device uses a shared channel
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t dev /* Device to check. */
+ );
+
+/****************************************************************************/
+/**
+* Allocates memory to hold a descriptor ring. The descriptor ring then
+* needs to be populated by making one or more calls to
+* dna_add_descriptors.
+*
+* The returned descriptor ring will be automatically initialized.
+*
+* @return
+* 0 Descriptor ring was allocated successfully
+* -ENOMEM Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to populate */
+ int numDescriptors /* Number of descriptors that need to be allocated. */
+ );
+
+/****************************************************************************/
+/**
+* Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring /* Descriptor to release */
+ );
+
+/****************************************************************************/
+/**
+* Initializes a descriptor ring, so that descriptors can be added to it.
+* Once a descriptor ring has been allocated, it may be reinitialized for
+* use with additional/different regions of memory.
+*
+* Note that if 7 descriptors are allocated, it's perfectly acceptable to
+* initialize the ring with a smaller number of descriptors. The amount
+* of memory allocated for the descriptor ring will not be reduced, and
+* the descriptor ring may be reinitialized later
+*
+* @return
+* 0 Descriptor ring was initialized successfully
+* -ENOMEM The descriptor which was passed in has insufficient space
+* to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to initialize */
+ int numDescriptors /* Number of descriptors to initialize. */
+ );
+
+/****************************************************************************/
+/**
+* Determines the number of descriptors which would be required for a
+* transfer of the indicated memory region.
+*
+* This function also needs to know which DMA device this transfer will
+* be destined for, so that the appropriate DMA configuration can be retrieved.
+* DMA parameters such as transfer width, and whether this is a memory-to-memory
+* or memory-to-peripheral, etc can all affect the actual number of descriptors
+* required.
+*
+* @return
+* > 0 Returns the number of descriptors required for the indicated transfer
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Adds a region of memory to the descriptor ring. Note that it may take
+* multiple descriptors for each region of memory. It is the callers
+* responsibility to allocate a sufficiently large descriptor ring.
+*
+* @return
+* 0 Descriptors were added successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring, /* Descriptor ring to add descriptors to */
+ DMA_Device_t device, /* DMA Device that descriptors are for */
+ dma_addr_t srcData, /* Place to get data (memory or device) */
+ dma_addr_t dstData, /* Place to put data (memory or device) */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Sets the descriptor ring associated with a device.
+*
+* Once set, the descriptor ring will be associated with the device, even
+* across channel request/free calls. Passing in a NULL descriptor ring
+* will release any descriptor ring currently associated with the device.
+*
+* Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+* the descriptor ring may be released and reallocated.
+*
+* Note: This function will release the descriptor memory for any current
+* descriptor ring associated with this device.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Descriptor ring to add descriptors to */
+ );
+
+/****************************************************************************/
+/**
+* Retrieves the descriptor ring associated with a device.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Place to store retrieved ring */
+ );
+
+/****************************************************************************/
+/**
+* Allocates buffers for the descriptors. This is normally done automatically
+* but needs to be done explicitly when initiating a dma from interrupt
+* context.
+*
+* @return
+* 0 Descriptors were allocated successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Allocates and sets up descriptors for a double buffered circular buffer.
+*
+* This is primarily intended to be used for things like the ingress samples
+* from a microphone.
+*
+* @return
+* > 0 Number of descriptors actually allocated.
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Physical address of source data */
+ dma_addr_t dstData1, /* Physical address of first destination buffer */
+ dma_addr_t dstData2, /* Physical address of second destination buffer */
+ size_t numBytes /* Number of bytes in each destination buffer */
+ );
+
+/****************************************************************************/
+/**
+* Initializes a DMA_MemMap_t data structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
+ );
+
+/****************************************************************************/
+/**
+* Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
+ );
+
+/****************************************************************************/
+/**
+* Looks at a memory address and categorizes it.
+*
+* @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr);
+
+/****************************************************************************/
+/**
+* Sets the process (aka userTask) associated with a mem map. This is
+* required if user-mode segments will be added to the mapping.
+*/
+/****************************************************************************/
+
+static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
+ struct task_struct *task)
+{
+ memMap->userTask = task;
+}
+
+/****************************************************************************/
+/**
+* Looks at a memory address and determines if we support DMA'ing to/from
+* that type of memory.
+*
+* @return boolean -
+* return value != 0 means dma supported
+* return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr);
+
+/****************************************************************************/
+/**
+* Initializes a memory map for use. Since this function acquires a
+* sempaphore within the memory map, it is VERY important that dma_unmap
+* be called when you're finished using the map.
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ );
+
+/****************************************************************************/
+/**
+* Adds a segment of memory to a memory map.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *mem, /* Virtual address that we want to get a map of */
+ size_t numBytes /* Number of bytes being mapped */
+ );
+
+/****************************************************************************/
+/**
+* Creates a descriptor ring from a memory mapping.
+*
+* @return 0 on sucess, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
+ DMA_MemMap_t *memMap, /* Memory map that will be used */
+ dma_addr_t devPhysAddr /* Physical address of device */
+ );
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *addr, /* Virtual address that we want to get a map of */
+ size_t count, /* Number of bytes being mapped */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ );
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ int dirtied /* non-zero if any of the pages were modified */
+ );
+
+/****************************************************************************/
+/**
+* Initiates a transfer when the descriptors have already been setup.
+*
+* This is a special case, and normally, the dma_transfer_xxx functions should
+* be used.
+*
+* @return
+* 0 Transfer was started successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+* Stops a previously started DMA transfer.
+*
+* @return
+* 0 Transfer was stopped successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+* Waits for a DMA to complete by polling. This function is only intended
+* to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+* Initiates a DMA transfer
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Initiates a transfer from memory to a device.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_to_device(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Place to get data to write to device (physical address) */
+ dma_addr_t dstData, /* Pointer to device data address (physical address) */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ return dma_transfer(handle,
+ dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+* Initiates a transfer from a device to memory.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_from_device(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Pointer to the device data address (physical address) */
+ dma_addr_t dstData, /* Place to store data retrieved from the device (physical address) */
+ size_t numBytes /* Number of bytes to retrieve from the device */
+ ) {
+ return dma_transfer(handle,
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+* Initiates a memory to memory transfer.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Place to transfer data from (physical address) */
+ dma_addr_t dstData, /* Place to transfer data to (physical address) */
+ size_t numBytes /* Number of bytes to transfer */
+ ) {
+ return dma_transfer(handle,
+ dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+* Set the callback function which will be called when a transfer completes.
+* If a NULL callback function is set, then no callback will occur.
+*
+* @note @a devHandler will be called from IRQ context.
+*
+* @return
+* 0 - Success
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. */
+ DMA_DeviceHandler_t devHandler, /* Function to call when the DMA completes */
+ void *userData /* Pointer which will be passed to devHandler. */
+ );
+
+#endif
+
+#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
new file mode 100644
index 00000000000..7d393ca010a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -0,0 +1,86 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+ *
+ * Low-level IRQ helper macros for BCMRing-based platforms
+ *
+ */
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =(MM_IO_BASE_INTC0)
+ ldr \irqstat, [\base, #0] @ get status
+ ldr \irqnr, [\base, #0x10] @ mask with enable register
+ ands \irqstat, \irqstat, \irqnr
+ mov \irqnr, #IRQ_INTC0_START
+ cmp \irqstat, #0
+ bne 1001f
+
+ ldr \base, =(MM_IO_BASE_INTC1)
+ ldr \irqstat, [\base, #0] @ get status
+ ldr \irqnr, [\base, #0x10] @ mask with enable register
+ ands \irqstat, \irqstat, \irqnr
+ mov \irqnr, #IRQ_INTC1_START
+ cmp \irqstat, #0
+ bne 1001f
+
+ ldr \base, =(MM_IO_BASE_SINTC)
+ ldr \irqstat, [\base, #0] @ get status
+ ldr \irqnr, [\base, #0x10] @ mask with enable register
+ ands \irqstat, \irqstat, \irqnr
+ mov \irqnr, #0xffffffff @ code meaning no interrupt bits set
+ cmp \irqstat, #0
+ beq 1002f
+
+ mov \irqnr, #IRQ_SINTC_START @ something is set, so fixup return value
+
+1001:
+ movs \tmp, \irqstat, lsl #16
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #16
+
+ movs \tmp, \irqstat, lsl #8
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #8
+
+ movs \tmp, \irqstat, lsl #4
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #4
+
+ movs \tmp, \irqstat, lsl #2
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #2
+
+ movs \tmp, \irqstat, lsl #1
+ addeq \irqnr, \irqnr, #1
+ orrs \base, \base, #1
+
+1002: @ irqnr will be set to 0xffffffff if no irq bits are set
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro irq_prio_table
+ .endm
+
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
new file mode 100644
index 00000000000..447eb340c61
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -0,0 +1,60 @@
+/*
+ *
+ * This file contains the hardware definitions of the BCMRing.
+ *
+ * Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/memory.h>
+#include <cfg_global.h>
+#include <mach/csp/mm_io.h>
+
+/* Hardware addresses of major areas.
+ * *_START is the physical address
+ * *_SIZE is the size of the region
+ * *_BASE is the virtual address
+ */
+#define RAM_START PHYS_OFFSET
+
+#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
+#define RAM_BASE PAGE_OFFSET
+
+#define pcibios_assign_all_busses() 1
+
+/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
+/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
+#if defined(__KERNEL__)
+#define HW_DECLARE_SPINLOCK(name) DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
+#define HW_EXTERN_SPINLOCK(name) extern spinlock_t bcmring_##name##_reg_lock;
+#define HW_IRQ_SAVE(name, val) spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
+#define HW_IRQ_RESTORE(name, val) spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
+#else
+#define HW_DECLARE_SPINLOCK(name)
+#define HW_EXTERN_SPINLOCK(name)
+#define HW_IRQ_SAVE(name, val) {(void)(name); (void)(val); }
+#define HW_IRQ_RESTORE(name, val) {(void)(name); (void)(val); }
+#endif
+
+#ifndef HW_IO_PHYS_TO_VIRT
+#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
+#endif
+#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
new file mode 100644
index 00000000000..4db0eff9035
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
+
+/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
+/* happen in readw/writew etc. */
+
+#define readb(c) __raw_readb(c)
+#define readw(c) __raw_readw(c)
+#define readl(c) __raw_readl(c)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p, d, l) __raw_readsb(p, d, l)
+#define readsw(p, d, l) __raw_readsw(p, d, l)
+#define readsl(p, d, l) __raw_readsl(p, d, l)
+
+#define writeb(v, c) __raw_writeb(v, c)
+#define writew(v, c) __raw_writew(v, c)
+#define writel(v, c) __raw_writel(v, c)
+
+#define writesb(p, d, l) __raw_writesb(p, d, l)
+#define writesw(p, d, l) __raw_writesw(p, d, l)
+#define writesl(p, d, l) __raw_writesl(p, d, l)
+
+#define memset_io(c, v, l) _memset_io((c), (v), (l))
+#define memcpy_fromio(a, c, l) _memcpy_fromio((a), (c), (l))
+#define memcpy_toio(c, a, l) _memcpy_toio((c), (a), (l))
+
+#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h
new file mode 100644
index 00000000000..b279b825d4a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/irqs.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2007 Broadcom
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#if !defined(ARCH_BCMRING_IRQS_H)
+#define ARCH_BCMRING_IRQS_H
+
+/* INTC0 - interrupt controller 0 */
+#define IRQ_INTC0_START 0
+#define IRQ_DMA0C0 0 /* DMA0 channel 0 interrupt */
+#define IRQ_DMA0C1 1 /* DMA0 channel 1 interrupt */
+#define IRQ_DMA0C2 2 /* DMA0 channel 2 interrupt */
+#define IRQ_DMA0C3 3 /* DMA0 channel 3 interrupt */
+#define IRQ_DMA0C4 4 /* DMA0 channel 4 interrupt */
+#define IRQ_DMA0C5 5 /* DMA0 channel 5 interrupt */
+#define IRQ_DMA0C6 6 /* DMA0 channel 6 interrupt */
+#define IRQ_DMA0C7 7 /* DMA0 channel 7 interrupt */
+#define IRQ_DMA1C0 8 /* DMA1 channel 0 interrupt */
+#define IRQ_DMA1C1 9 /* DMA1 channel 1 interrupt */
+#define IRQ_DMA1C2 10 /* DMA1 channel 2 interrupt */
+#define IRQ_DMA1C3 11 /* DMA1 channel 3 interrupt */
+#define IRQ_DMA1C4 12 /* DMA1 channel 4 interrupt */
+#define IRQ_DMA1C5 13 /* DMA1 channel 5 interrupt */
+#define IRQ_DMA1C6 14 /* DMA1 channel 6 interrupt */
+#define IRQ_DMA1C7 15 /* DMA1 channel 7 interrupt */
+#define IRQ_VPM 16 /* Voice process module interrupt */
+#define IRQ_USBHD2 17 /* USB host2/device2 interrupt */
+#define IRQ_USBH1 18 /* USB1 host interrupt */
+#define IRQ_USBD 19 /* USB device interrupt */
+#define IRQ_SDIOH0 20 /* SDIO0 host interrupt */
+#define IRQ_SDIOH1 21 /* SDIO1 host interrupt */
+#define IRQ_TIMER0 22 /* Timer0 interrupt */
+#define IRQ_TIMER1 23 /* Timer1 interrupt */
+#define IRQ_TIMER2 24 /* Timer2 interrupt */
+#define IRQ_TIMER3 25 /* Timer3 interrupt */
+#define IRQ_SPIH 26 /* SPI host interrupt */
+#define IRQ_ESW 27 /* Ethernet switch interrupt */
+#define IRQ_APM 28 /* Audio process module interrupt */
+#define IRQ_GE 29 /* Graphic engine interrupt */
+#define IRQ_CLCD 30 /* LCD Controller interrupt */
+#define IRQ_PIF 31 /* Peripheral interface interrupt */
+#define IRQ_INTC0_END 31
+
+/* INTC1 - interrupt controller 1 */
+#define IRQ_INTC1_START 32
+#define IRQ_GPIO0 32 /* 0 GPIO bit 31//0 combined interrupt */
+#define IRQ_GPIO1 33 /* 1 GPIO bit 64//32 combined interrupt */
+#define IRQ_I2S0 34 /* 2 I2S0 interrupt */
+#define IRQ_I2S1 35 /* 3 I2S1 interrupt */
+#define IRQ_I2CH 36 /* 4 I2C host interrupt */
+#define IRQ_I2CS 37 /* 5 I2C slave interrupt */
+#define IRQ_SPIS 38 /* 6 SPI slave interrupt */
+#define IRQ_GPHY 39 /* 7 Gigabit Phy interrupt */
+#define IRQ_FLASHC 40 /* 8 Flash controller interrupt */
+#define IRQ_COMMTX 41 /* 9 ARM DDC transmit interrupt */
+#define IRQ_COMMRX 42 /* 10 ARM DDC receive interrupt */
+#define IRQ_PMUIRQ 43 /* 11 ARM performance monitor interrupt */
+#define IRQ_UARTB 44 /* 12 UARTB */
+#define IRQ_WATCHDOG 45 /* 13 Watchdog timer interrupt */
+#define IRQ_UARTA 46 /* 14 UARTA */
+#define IRQ_TSC 47 /* 15 Touch screen controller interrupt */
+#define IRQ_KEYC 48 /* 16 Key pad controller interrupt */
+#define IRQ_DMPU 49 /* 17 DDR2 memory partition interrupt */
+#define IRQ_VMPU 50 /* 18 VRAM memory partition interrupt */
+#define IRQ_FMPU 51 /* 19 Flash memory parition unit interrupt */
+#define IRQ_RNG 52 /* 20 Random number generator interrupt */
+#define IRQ_RTC0 53 /* 21 Real time clock periodic interrupt */
+#define IRQ_RTC1 54 /* 22 Real time clock one-shot interrupt */
+#define IRQ_SPUM 55 /* 23 Secure process module interrupt */
+#define IRQ_VDEC 56 /* 24 Hantro video decoder interrupt */
+#define IRQ_RTC2 57 /* 25 Real time clock tamper interrupt */
+#define IRQ_DDRP 58 /* 26 DDR Panic interrupt */
+#define IRQ_INTC1_END 58
+
+/* SINTC secure int controller */
+#define IRQ_SINTC_START 59
+#define IRQ_SEC_WATCHDOG 59 /* 0 Watchdog timer interrupt */
+#define IRQ_SEC_UARTA 60 /* 1 UARTA interrupt */
+#define IRQ_SEC_TSC 61 /* 2 Touch screen controller interrupt */
+#define IRQ_SEC_KEYC 62 /* 3 Key pad controller interrupt */
+#define IRQ_SEC_DMPU 63 /* 4 DDR2 memory partition interrupt */
+#define IRQ_SEC_VMPU 64 /* 5 VRAM memory partition interrupt */
+#define IRQ_SEC_FMPU 65 /* 6 Flash memory parition unit interrupt */
+#define IRQ_SEC_RNG 66 /* 7 Random number generator interrupt */
+#define IRQ_SEC_RTC0 67 /* 8 Real time clock periodic interrupt */
+#define IRQ_SEC_RTC1 68 /* 9 Real time clock one-shot interrupt */
+#define IRQ_SEC_SPUM 69 /* 10 Secure process module interrupt */
+#define IRQ_SEC_TIMER0 70 /* 11 Secure timer0 interrupt */
+#define IRQ_SEC_TIMER1 71 /* 12 Secure timer1 interrupt */
+#define IRQ_SEC_TIMER2 72 /* 13 Secure timer2 interrupt */
+#define IRQ_SEC_TIMER3 73 /* 14 Secure timer3 interrupt */
+#define IRQ_SEC_RTC2 74 /* 15 Real time clock tamper interrupt */
+
+#define IRQ_SINTC_END 74
+
+/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
+/* Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
+/* to make the mapping easy for humans to decipher. */
+
+#define IRQ_GPIO_0 100
+
+#define NUM_INTERNAL_IRQS (IRQ_SINTC_END+1)
+
+/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
+/* define NUM_GPIO_IRQS GPIOHW_TOTAL_NUM_PINS */
+#define NUM_GPIO_IRQS 62
+
+#define NR_IRQS (IRQ_GPIO_0 + NUM_GPIO_IRQS)
+
+#define IRQ_UNKNOWN -1
+
+/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
+#define IRQ_INTC0_VALID_MASK 0xffffffff
+#define IRQ_INTC1_VALID_MASK 0x07ffffff
+#define IRQ_SINTC_VALID_MASK 0x0000ffff
+
+#endif /* ARCH_BCMRING_IRQS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
new file mode 100644
index 00000000000..114f942bb4f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <cfg_global.h>
+
+/*
+ * Physical vs virtual RAM address space conversion. These are
+ * private definitions which should NOT be used outside memory.h
+ * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+
+#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+
+/*
+ * Maximum DMA memory allowed is 14M
+ */
+#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h
new file mode 100644
index 00000000000..ce5cd16f2ac
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory_settings.h
@@ -0,0 +1,67 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef MEMORY_SETTINGS_H
+#define MEMORY_SETTINGS_H
+
+/* ---- Include Files ---------------------------------------- */
+/* ---- Constants and Types ---------------------------------- */
+
+/* Memory devices */
+/* NAND Flash timing for 166 MHz setting */
+#define HW_CFG_NAND_tBTA (5 << 16) /* Bus turnaround cycle (n) 0-7 (30 ns) */
+#define HW_CFG_NAND_tWP (4 << 11) /* Write pulse width cycle (n+1) 0-31 (25 ns) */
+#define HW_CFG_NAND_tWR (1 << 9) /* Write recovery cycle (n+1) 0-3 (10 ns) */
+#define HW_CFG_NAND_tAS (0 << 7) /* Write address setup cycle (n+1) 0-3 ( 0 ns) */
+#define HW_CFG_NAND_tOE (3 << 5) /* Output enable delay cycle (n) 0-3 (15 ns) */
+#define HW_CFG_NAND_tRC (7 << 0) /* Read access cycle (n+2) 0-31 (50 ns) */
+
+#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
+ | HW_CFG_NAND_tWP \
+ | HW_CFG_NAND_tWR \
+ | HW_CFG_NAND_tAS \
+ | HW_CFG_NAND_tOE \
+ | HW_CFG_NAND_tRC)
+
+/* NOR Flash timing for 166 MHz setting */
+#define HW_CFG_NOR_TPRC_TWLC (0 << 19) /* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
+#define HW_CFG_NOR_TBTA (0 << 16) /* Bus turnaround cycle (n) (DNA) */
+#define HW_CFG_NOR_TWP (6 << 11) /* Write pulse width cycle (n+1) (35ns) */
+#define HW_CFG_NOR_TWR (0 << 9) /* Write recovery cycle (n+1) (0ns) */
+#define HW_CFG_NOR_TAS (0 << 7) /* Write address setup cycle (n+1) (0ns) */
+#define HW_CFG_NOR_TOE (0 << 5) /* Output enable delay cycle (n) (max 25ns) */
+#define HW_CFG_NOR_TRC_TLC (0x10 << 0) /* Read access cycle / Burst read latency (n+2 / n+1) (100ns) */
+
+#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
+ | HW_CFG_NOR_TBTA \
+ | HW_CFG_NOR_TWP \
+ | HW_CFG_NOR_TWR \
+ | HW_CFG_NOR_TAS \
+ | HW_CFG_NOR_TOE \
+ | HW_CFG_NOR_TRC_TLC)
+
+#define HW_CFG_FLASH1_TCR HW_CFG_FLASH0_TCR
+#define HW_CFG_FLASH2_TCR HW_CFG_FLASH0_TCR
+
+/* SDRAM Settings */
+/* #define HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */
+/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */
+/* #define HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */
+/* #define HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */
+#define HW_CFG_SDRAM_SIZE_BYTES 0x10000000 /* Total memory, not per device size */
+
+/* ---- Variable Externs ------------------------------------- */
+/* ---- Function Prototypes ---------------------------------- */
+
+#endif /* MEMORY_SETTINGS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
new file mode 100644
index 00000000000..cdbf93c694a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -0,0 +1,54 @@
+/*
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/csp/chipcHw_inline.h>
+
+extern int bcmring_arch_warm_reboot;
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, char *cmd)
+{
+ printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+ if (mode == 'h') {
+ /* Reboot configured in proc entry */
+ if (bcmring_arch_warm_reboot) {
+ printk("warm reset\n");
+ /* Issue Warm reset (do not reset ethernet switch, keep alive) */
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+ } else {
+ /* Force reset of everything */
+ printk("force reset\n");
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+ } else {
+ /* Force reset of everything */
+ printk("force reset\n");
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h
new file mode 100644
index 00000000000..5a94bbb032b
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timer.h
@@ -0,0 +1,77 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+* timer.h
+*
+* PURPOSE:
+*
+*
+*
+* NOTES:
+*
+*****************************************************************************/
+
+#if !defined(BCM_LINUX_TIMER_H)
+#define BCM_LINUX_TIMER_H
+
+#if defined(__KERNEL__)
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Constants and Types ---------------------------------------------- */
+
+typedef unsigned int timer_tick_count_t;
+typedef unsigned int timer_tick_rate_t;
+typedef unsigned int timer_msec_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+/* ---- Function Prototypes ---------------------------------------------- */
+
+/****************************************************************************
+*
+* timer_get_tick_count
+*
+*
+***************************************************************************/
+timer_tick_count_t timer_get_tick_count(void);
+
+/****************************************************************************
+*
+* timer_get_tick_rate
+*
+*
+***************************************************************************/
+timer_tick_rate_t timer_get_tick_rate(void);
+
+/****************************************************************************
+*
+* timer_get_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_get_msec(void);
+
+/****************************************************************************
+*
+* timer_ticks_to_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
+
+#endif /* __KERNEL__ */
+#endif /* BCM_LINUX_TIMER_H */
diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h
new file mode 100644
index 00000000000..40d033ec589
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *
+ * Integrator architecture timex specifications
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Specifies the number of ticks per second
+ */
+#define CLOCK_TICK_RATE 100000 /* REG_SMT_TICKS_PER_SEC */
diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h
new file mode 100644
index 00000000000..9c9821b7797
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/uncompress.h
@@ -0,0 +1,43 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/mm_addr.h>
+
+#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
+#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+ /* Send out UARTA */
+ while (BCMRING_UART_0_FR & (1 << 5))
+ ;
+
+ BCMRING_UART_0_DR = c;
+}
+
+
+static inline void flush(void)
+{
+ /* Wait for the tx fifo to be empty */
+ while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
+ ;
+
+ /* Wait for the final character to be sent on the txd line */
+ while (BCMRING_UART_0_FR & (1 << 3))
+ ;
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
new file mode 100644
index 00000000000..35e2ead8395
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -0,0 +1,25 @@
+/*
+ *
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
+ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
+ * larger physical memory designs better.
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
new file mode 100644
index 00000000000..dc1c4939b0c
--- /dev/null
+++ b/arch/arm/mach-bcmring/irq.c
@@ -0,0 +1,127 @@
+/*
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <mach/csp/intcHw_reg.h>
+#include <mach/csp/mm_io.h>
+
+static void bcmring_mask_irq0(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC0_START),
+ MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq0(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC0_START),
+ MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq1(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC1_START),
+ MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq1(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC1_START),
+ MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq2(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_SINTC_START),
+ MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq2(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_SINTC_START),
+ MM_IO_BASE_SINTC + INTCHW_INTENABLE);
+}
+
+static struct irq_chip bcmring_irq0_chip = {
+ .typename = "ARM-INTC0",
+ .ack = bcmring_mask_irq0,
+ .mask = bcmring_mask_irq0, /* mask a specific interrupt, blocking its delivery. */
+ .unmask = bcmring_unmask_irq0, /* unmaks an interrupt */
+};
+
+static struct irq_chip bcmring_irq1_chip = {
+ .typename = "ARM-INTC1",
+ .ack = bcmring_mask_irq1,
+ .mask = bcmring_mask_irq1,
+ .unmask = bcmring_unmask_irq1,
+};
+
+static struct irq_chip bcmring_irq2_chip = {
+ .typename = "ARM-SINTC",
+ .ack = bcmring_mask_irq2,
+ .mask = bcmring_mask_irq2,
+ .unmask = bcmring_unmask_irq2,
+};
+
+static void vic_init(void __iomem *base, struct irq_chip *chip,
+ unsigned int irq_start, unsigned int vic_sources)
+{
+ unsigned int i;
+ for (i = 0; i < 32; i++) {
+ unsigned int irq = irq_start + i;
+ set_irq_chip(irq, chip);
+ set_irq_chip_data(irq, base);
+
+ if (vic_sources & (1 << i)) {
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+ writel(0, base + INTCHW_INTSELECT);
+ writel(0, base + INTCHW_INTENABLE);
+ writel(~0, base + INTCHW_INTENCLEAR);
+ writel(0, base + INTCHW_IRQSTATUS);
+ writel(~0, base + INTCHW_SOFTINTCLEAR);
+}
+
+void __init bcmring_init_irq(void)
+{
+ vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
+ IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
+ vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
+ IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
+ vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
+ IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
+
+ /* special cases */
+ if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
+ set_irq_handler(IRQ_GPIO0, handle_simple_irq);
+ }
+ if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
+ set_irq_handler(IRQ_GPIO1, handle_simple_irq);
+ }
+}
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
new file mode 100644
index 00000000000..0f1c37e4523
--- /dev/null
+++ b/arch/arm/mach-bcmring/mm.c
@@ -0,0 +1,56 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+#define IO_DESC(va, sz) { .virtual = va, \
+ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+ .length = sz, \
+ .type = MT_DEVICE }
+
+#define MEM_DESC(va, sz) { .virtual = va, \
+ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+ .length = sz, \
+ .type = MT_MEMORY }
+
+static struct map_desc bcmring_io_desc[] __initdata = {
+ IO_DESC(MM_IO_BASE_NAND, SZ_64K), /* phys:0x28000000-0x28000FFF virt:0xE8000000-0xE8000FFF size:0x00010000 */
+ IO_DESC(MM_IO_BASE_UMI, SZ_64K), /* phys:0x2C000000-0x2C000FFF virt:0xEC000000-0xEC000FFF size:0x00010000 */
+
+ IO_DESC(MM_IO_BASE_BROM, SZ_64K), /* phys:0x30000000-0x3000FFFF virt:0xF3000000-0xF300FFFF size:0x00010000 */
+ MEM_DESC(MM_IO_BASE_ARAM, SZ_1M), /* phys:0x31000000-0x31FFFFFF virt:0xF3100000-0xF31FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_DMA0, SZ_1M), /* phys:0x32000000-0x32FFFFFF virt:0xF3200000-0xF32FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_DMA1, SZ_1M), /* phys:0x33000000-0x33FFFFFF virt:0xF3300000-0xF33FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_ESW, SZ_1M), /* phys:0x34000000-0x34FFFFFF virt:0xF3400000-0xF34FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_CLCD, SZ_1M), /* phys:0x35000000-0x35FFFFFF virt:0xF3500000-0xF35FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_APM, SZ_1M), /* phys:0x36000000-0x36FFFFFF virt:0xF3600000-0xF36FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_SPUM, SZ_1M), /* phys:0x37000000-0x37FFFFFF virt:0xF3700000-0xF37FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M), /* phys:0x38000000-0x38FFFFFF virt:0xF3800000-0xF38FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M), /* phys:0x3A000000-0x3AFFFFFF virt:0xF3A00000-0xF3AFFFFF size:0x01000000 */
+
+ IO_DESC(MM_IO_BASE_VRAM, SZ_64K), /* phys:0x40000000-0x4000FFFF virt:0xF4000000-0xF400FFFF size:0x00010000 */
+ IO_DESC(MM_IO_BASE_CHIPC, SZ_16M), /* phys:0x80000000-0x80FFFFFF virt:0xF8000000-0xF8FFFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
+ SZ_16M), /* phys:0x0F000000-0x0FFFFFFF virt:0xF0000000-0xF0FFFFFF size:0x01000000 */
+};
+
+void __init bcmring_map_io(void)
+{
+
+ iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+}
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
new file mode 100644
index 00000000000..2d415d2a8e6
--- /dev/null
+++ b/arch/arm/mach-bcmring/timer.c
@@ -0,0 +1,62 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <csp/tmrHw.h>
+
+#include <mach/timer.h>
+/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
+/* The real time clock should probably be the real linux clocksource. */
+/* In the meantime, this file should agree with core.c as to the */
+/* profiling timer. If the clocksource is moved to rtc later, then */
+/* we can init the profiling timer here instead. */
+
+/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
+/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
+/* affect synchronization with scheduling and APM timing. */
+
+#define PROF_TIMER 1
+
+timer_tick_rate_t timer_get_tick_rate(void)
+{
+ return tmrHw_getCountRate(PROF_TIMER);
+}
+
+timer_tick_count_t timer_get_tick_count(void)
+{
+ return tmrHw_GetCurrentCount(PROF_TIMER); /* change downcounter to upcounter */
+}
+
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
+{
+ static int tickRateMsec;
+
+ if (tickRateMsec == 0) {
+ tickRateMsec = timer_get_tick_rate() / 1000;
+ }
+
+ return ticks / tickRateMsec;
+}
+
+timer_msec_t timer_get_msec(void)
+{
+ return timer_ticks_to_msec(timer_get_tick_count());
+}
+
+EXPORT_SYMBOL(timer_get_tick_count);
+EXPORT_SYMBOL(timer_ticks_to_msec);
+EXPORT_SYMBOL(timer_get_tick_rate);
+EXPORT_SYMBOL(timer_get_msec);
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3fbd9b0fbe2..caf6d5154ae 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -12,18 +12,15 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
static struct physmap_flash_data adssphere_flash_data = {
.width = 4,
};
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 6c4c1633ed1..3dd0e2a2309 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -22,48 +22,39 @@
#include <mach/hardware.h>
-/*
- * The EP93xx has two external crystal oscillators. To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks. The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE 14745600
-#define EP93XX_EXT_RTC_RATE 32768
-
-
struct clk {
unsigned long rate;
int users;
int sw_locked;
- u32 enable_reg;
+ void __iomem *enable_reg;
u32 enable_mask;
unsigned long (*get_rate)(struct clk *clk);
+ int (*set_rate)(struct clk *clk, unsigned long rate);
};
static unsigned long get_uart_rate(struct clk *clk);
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
+
static struct clk clk_uart1 = {
.sw_locked = 1,
- .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
- .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+ .enable_reg = EP93XX_SYSCON_DEVCFG,
+ .enable_mask = EP93XX_SYSCON_DEVCFG_U1EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart2 = {
.sw_locked = 1,
- .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
- .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+ .enable_reg = EP93XX_SYSCON_DEVCFG,
+ .enable_mask = EP93XX_SYSCON_DEVCFG_U2EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart3 = {
.sw_locked = 1,
- .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
- .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+ .enable_reg = EP93XX_SYSCON_DEVCFG,
+ .enable_mask = EP93XX_SYSCON_DEVCFG_U3EN,
.get_rate = get_uart_rate,
};
static struct clk clk_pll1;
@@ -75,6 +66,15 @@ static struct clk clk_usb_host = {
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN,
};
+static struct clk clk_keypad = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV,
+ .enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+ .set_rate = set_keytchclk_rate,
+};
+static struct clk clk_pwm = {
+ .rate = EP93XX_EXT_CLK_RATE,
+};
/* DMA Clocks */
static struct clk clk_m2p0 = {
@@ -130,27 +130,29 @@ static struct clk clk_m2m1 = {
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
- INIT_CK("apb:uart1", NULL, &clk_uart1),
- INIT_CK("apb:uart2", NULL, &clk_uart2),
- INIT_CK("apb:uart3", NULL, &clk_uart3),
- INIT_CK(NULL, "pll1", &clk_pll1),
- INIT_CK(NULL, "fclk", &clk_f),
- INIT_CK(NULL, "hclk", &clk_h),
- INIT_CK(NULL, "pclk", &clk_p),
- INIT_CK(NULL, "pll2", &clk_pll2),
- INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
- INIT_CK(NULL, "m2p0", &clk_m2p0),
- INIT_CK(NULL, "m2p1", &clk_m2p1),
- INIT_CK(NULL, "m2p2", &clk_m2p2),
- INIT_CK(NULL, "m2p3", &clk_m2p3),
- INIT_CK(NULL, "m2p4", &clk_m2p4),
- INIT_CK(NULL, "m2p5", &clk_m2p5),
- INIT_CK(NULL, "m2p6", &clk_m2p6),
- INIT_CK(NULL, "m2p7", &clk_m2p7),
- INIT_CK(NULL, "m2p8", &clk_m2p8),
- INIT_CK(NULL, "m2p9", &clk_m2p9),
- INIT_CK(NULL, "m2m0", &clk_m2m0),
- INIT_CK(NULL, "m2m1", &clk_m2m1),
+ INIT_CK("apb:uart1", NULL, &clk_uart1),
+ INIT_CK("apb:uart2", NULL, &clk_uart2),
+ INIT_CK("apb:uart3", NULL, &clk_uart3),
+ INIT_CK(NULL, "pll1", &clk_pll1),
+ INIT_CK(NULL, "fclk", &clk_f),
+ INIT_CK(NULL, "hclk", &clk_h),
+ INIT_CK(NULL, "pclk", &clk_p),
+ INIT_CK(NULL, "pll2", &clk_pll2),
+ INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
+ INIT_CK("ep93xx-keypad", NULL, &clk_keypad),
+ INIT_CK(NULL, "pwm_clk", &clk_pwm),
+ INIT_CK(NULL, "m2p0", &clk_m2p0),
+ INIT_CK(NULL, "m2p1", &clk_m2p1),
+ INIT_CK(NULL, "m2p2", &clk_m2p2),
+ INIT_CK(NULL, "m2p3", &clk_m2p3),
+ INIT_CK(NULL, "m2p4", &clk_m2p4),
+ INIT_CK(NULL, "m2p5", &clk_m2p5),
+ INIT_CK(NULL, "m2p6", &clk_m2p6),
+ INIT_CK(NULL, "m2p7", &clk_m2p7),
+ INIT_CK(NULL, "m2p8", &clk_m2p8),
+ INIT_CK(NULL, "m2p9", &clk_m2p9),
+ INIT_CK(NULL, "m2m0", &clk_m2m0),
+ INIT_CK(NULL, "m2m1", &clk_m2m1),
};
@@ -160,9 +162,11 @@ int clk_enable(struct clk *clk)
u32 value;
value = __raw_readl(clk->enable_reg);
+ value |= clk->enable_mask;
if (clk->sw_locked)
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(value | clk->enable_mask, clk->enable_reg);
+ ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+ else
+ __raw_writel(value, clk->enable_reg);
}
return 0;
@@ -175,9 +179,11 @@ void clk_disable(struct clk *clk)
u32 value;
value = __raw_readl(clk->enable_reg);
+ value &= ~clk->enable_mask;
if (clk->sw_locked)
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(value & ~clk->enable_mask, clk->enable_reg);
+ ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+ else
+ __raw_writel(value, clk->enable_reg);
}
}
EXPORT_SYMBOL(clk_disable);
@@ -202,6 +208,43 @@ unsigned long clk_get_rate(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_rate);
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val;
+ u32 div_bit;
+
+ val = __raw_readl(clk->enable_reg);
+
+ /*
+ * The Key Matrix and ADC clocks are configured using the same
+ * System Controller register. The clock used will be either
+ * 1/4 or 1/16 the external clock rate depending on the
+ * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
+ * bit being set or cleared.
+ */
+ div_bit = clk->enable_mask >> 15;
+
+ if (rate == EP93XX_KEYTCHCLK_DIV4)
+ val |= div_bit;
+ else if (rate == EP93XX_KEYTCHCLK_DIV16)
+ val &= ~div_bit;
+ else
+ return -EINVAL;
+
+ ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+ clk->rate = rate;
+ return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk->set_rate)
+ return clk->set_rate(clk, rate);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 204dc5cbd0b..16b92c37ec9 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -16,40 +16,24 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
+#include <linux/platform_device.h>
#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
#include <linux/dma-mapping.h>
-#include <linux/time.h>
#include <linux/timex.h>
-#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
-#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
#include <asm/hardware/vic.h>
@@ -98,7 +82,7 @@ void __init ep93xx_map_io(void)
*/
static unsigned int last_jiffy_time;
-#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
{
@@ -362,8 +346,8 @@ void __init ep93xx_init_irq(void)
{
int gpio_irq;
- vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
- vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+ vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+ vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
for (gpio_irq = gpio_to_irq(0);
gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
@@ -385,6 +369,47 @@ void __init ep93xx_init_irq(void)
/*************************************************************************
+ * EP93xx System Controller Software Locked register handling
+ *************************************************************************/
+
+/*
+ * syscon_swlock prevents anything else from writing to the syscon
+ * block while a software locked register is being written.
+ */
+static DEFINE_SPINLOCK(syscon_swlock);
+
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&syscon_swlock, flags);
+
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(val, reg);
+
+ spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
+
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
+{
+ unsigned long flags;
+ unsigned int val;
+
+ spin_lock_irqsave(&syscon_swlock, flags);
+
+ val = __raw_readl(EP93XX_SYSCON_DEVCFG);
+ val |= set_bits;
+ val &= ~clear_bits;
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(val, EP93XX_SYSCON_DEVCFG);
+
+ spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
+
+
+/*************************************************************************
* EP93xx peripheral handling
*************************************************************************/
#define EP93XX_UART_MCR_OFFSET (0x0100)
@@ -517,10 +542,8 @@ static struct platform_device ep93xx_eth_device = {
void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
{
- if (copy_addr) {
- memcpy(data->dev_addr,
- (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
- }
+ if (copy_addr)
+ memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
ep93xx_eth_data = *data;
platform_device_register(&ep93xx_eth_device);
@@ -546,19 +569,125 @@ void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
platform_device_register(&ep93xx_i2c_device);
}
+
+/*************************************************************************
+ * EP93xx LEDs
+ *************************************************************************/
+static struct gpio_led ep93xx_led_pins[] = {
+ {
+ .name = "platform:grled",
+ .gpio = EP93XX_GPIO_LINE_GRLED,
+ }, {
+ .name = "platform:rdled",
+ .gpio = EP93XX_GPIO_LINE_RDLED,
+ },
+};
+
+static struct gpio_led_platform_data ep93xx_led_data = {
+ .num_leds = ARRAY_SIZE(ep93xx_led_pins),
+ .leds = ep93xx_led_pins,
+};
+
+static struct platform_device ep93xx_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ep93xx_led_data,
+ },
+};
+
+
+/*************************************************************************
+ * EP93xx pwm peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_pwm0_resource[] = {
+ {
+ .start = EP93XX_PWM_PHYS_BASE,
+ .end = EP93XX_PWM_PHYS_BASE + 0x10 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ep93xx_pwm0_device = {
+ .name = "ep93xx-pwm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource),
+ .resource = ep93xx_pwm0_resource,
+};
+
+static struct resource ep93xx_pwm1_resource[] = {
+ {
+ .start = EP93XX_PWM_PHYS_BASE + 0x20,
+ .end = EP93XX_PWM_PHYS_BASE + 0x30 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ep93xx_pwm1_device = {
+ .name = "ep93xx-pwm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource),
+ .resource = ep93xx_pwm1_resource,
+};
+
+void __init ep93xx_register_pwm(int pwm0, int pwm1)
+{
+ if (pwm0)
+ platform_device_register(&ep93xx_pwm0_device);
+
+ /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
+ if (pwm1)
+ platform_device_register(&ep93xx_pwm1_device);
+}
+
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
+{
+ int err;
+
+ if (pdev->id == 0) {
+ err = 0;
+ } else if (pdev->id == 1) {
+ err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
+ dev_name(&pdev->dev));
+ if (err)
+ return err;
+ err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
+ if (err)
+ goto fail;
+
+ /* PWM 1 output on EGPIO[14] */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
+ } else {
+ err = -ENODEV;
+ }
+
+ return err;
+
+fail:
+ gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+ return err;
+}
+EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
+
+void ep93xx_pwm_release_gpio(struct platform_device *pdev)
+{
+ if (pdev->id == 1) {
+ gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
+ gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+
+ /* EGPIO[14] used for GPIO */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
+ }
+}
+EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
+
+
extern void ep93xx_gpio_init(void);
void __init ep93xx_init_devices(void)
{
- unsigned int v;
-
- /*
- * Disallow access to MaverickCrunch initially.
- */
- v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
- v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+ /* Disallow access to MaverickCrunch initially */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
ep93xx_gpio_init();
@@ -568,4 +697,5 @@ void __init ep93xx_init_devices(void)
platform_device_register(&ep93xx_rtc_device);
platform_device_register(&ep93xx_ohci_device);
+ platform_device_register(&ep93xx_leds);
}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index e9e45b92457..73145ae5d3f 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -26,18 +26,16 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/io.h>
#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
static struct physmap_flash_data edb93xx_flash_data;
static struct resource edb93xx_flash_resource = {
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 3bad500b71b..3da7ca816d1 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -12,18 +12,15 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
static struct physmap_flash_data gesbc9312_flash_data = {
.width = 4,
};
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 482cf3d2fbc..1ea8871e03a 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,15 +17,16 @@
#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
-#include <mach/ep93xx-regs.h>
-#include <asm/gpio.h>
+#include <mach/hardware.h>
struct ep93xx_gpio_chip {
struct gpio_chip chip;
- unsigned int data_reg;
- unsigned int data_dir_reg;
+ void __iomem *data_reg;
+ void __iomem *data_dir_reg;
};
#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
@@ -111,15 +112,61 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
u8 data_reg, data_dir_reg;
- int i;
+ int gpio, i;
data_reg = __raw_readb(ep93xx_chip->data_reg);
data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
- for (i = 0; i < chip->ngpio; i++)
- seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i,
- (data_reg & (1 << i)) ? "set" : "clear",
- (data_dir_reg & (1 << i)) ? "out" : "in");
+ gpio = ep93xx_chip->chip.base;
+ for (i = 0; i < chip->ngpio; i++, gpio++) {
+ int is_out = data_dir_reg & (1 << i);
+
+ seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s",
+ chip->label, i, gpio,
+ gpiochip_is_requested(chip, i) ? : "",
+ is_out ? "out" : "in ",
+ (data_reg & (1 << i)) ? "hi" : "lo");
+
+ if (!is_out) {
+ int irq = gpio_to_irq(gpio);
+ struct irq_desc *desc = irq_desc + irq;
+
+ if (irq >= 0 && desc->action) {
+ char *trigger;
+
+ switch (desc->status & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_NONE:
+ trigger = "(default)";
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ trigger = "edge-falling";
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ trigger = "edge-rising";
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ trigger = "edge-both";
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ trigger = "level-high";
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ trigger = "level-low";
+ break;
+ default:
+ trigger = "?trigger?";
+ break;
+ }
+
+ seq_printf(s, " irq-%d %s%s",
+ irq, trigger,
+ (desc->status & IRQ_WAKEUP)
+ ? " wakeup" : "");
+ }
+ }
+
+ seq_printf(s, "\n");
+ }
}
#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 967c079180d..ea78e908fc8 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,40 +52,43 @@
#define EP93XX_AHB_VIRT_BASE 0xfef00000
#define EP93XX_AHB_SIZE 0x00100000
+#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x))
+
#define EP93XX_APB_PHYS_BASE 0x80800000
#define EP93XX_APB_VIRT_BASE 0xfed00000
#define EP93XX_APB_SIZE 0x00200000
+#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x))
+
/* AHB peripherals */
-#define EP93XX_DMA_BASE ((void __iomem *) \
- (EP93XX_AHB_VIRT_BASE + 0x00000000))
+#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
-#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
-#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000)
#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
-#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000)
+#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
-#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000)
+#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
-#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000)
+#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000)
-#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000)
+#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000)
-#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000)
+#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000)
-#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000)
+#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000)
-#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000)
+#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000)
-#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000)
+#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000)
/* APB peripherals */
-#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
@@ -102,11 +105,11 @@
#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
-#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000)
+#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
-#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000)
+#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
-#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
@@ -124,32 +127,33 @@
#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
-#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000)
+#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
-#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000)
+#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000)
-#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000)
+#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
-#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000)
#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000)
-#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000)
#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000)
-#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000)
#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
-#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000)
+#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
-#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
-#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
-#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04)
@@ -172,14 +176,45 @@
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18)
+#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
+#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
+#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29)
+#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28)
+#define EP93XX_SYSCON_DEVCFG_GONK (1<<27)
+#define EP93XX_SYSCON_DEVCFG_TONG (1<<26)
+#define EP93XX_SYSCON_DEVCFG_MONG (1<<25)
+#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24)
+#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23)
+#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22)
+#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21)
+#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20)
+#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19)
+#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18)
+#define EP93XX_SYSCON_DEVCFG_TIN (1<<17)
+#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15)
+#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14)
+#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13)
+#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12)
+#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11)
+#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10)
+#define EP93XX_SYSCON_DEVCFG_PONG (1<<9)
+#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8)
+#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7)
+#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6)
+#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4)
+#define EP93XX_SYSCON_DEVCFG_RAS (1<<3)
+#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2)
+#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1)
+#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0)
+#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
-#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
+#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 2866297310b..349fa7cb72d 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -4,12 +4,23 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-#include "ep93xx-regs.h"
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
#define pcibios_assign_all_busses() 0
-#include "platform.h"
+/*
+ * The EP93xx has two external crystal oscillators. To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks. The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE 14745600
+#define EP93XX_EXT_RTC_RATE 32768
-#include "ts72xx.h"
+#define EP93XX_KEYTCHCLK_DIV4 (EP93XX_EXT_CLK_RATE / 4)
+#define EP93XX_KEYTCHCLK_DIV16 (EP93XX_EXT_CLK_RATE / 16)
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index fd5f081cc8b..cebcc1c53d6 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,8 +1,21 @@
/*
* arch/arm/mach-ep93xx/include/mach/io.h
*/
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) __typesafe_io(p)
-#define __mem_pci(p) (p)
+#define __io(p) __typesafe_io(p)
+#define __mem_pci(p) (p)
+
+/*
+ * A typesafe __io() variation for variable initialisers
+ */
+#ifdef __ASSEMBLER__
+#define IOMEM(p) p
+#else
+#define IOMEM(p) ((void __iomem __force *)(p))
+#endif
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 05f0f4f2f3c..5f5fa6574d3 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -5,6 +5,7 @@
#ifndef __ASSEMBLY__
struct i2c_board_info;
+struct platform_device;
struct ep93xx_eth_data
{
@@ -15,8 +16,27 @@ struct ep93xx_eth_data
void ep93xx_map_io(void);
void ep93xx_init_irq(void);
void ep93xx_init_time(unsigned long);
+
+/* EP93xx System Controller software locked register write */
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
+
+static inline void ep93xx_devcfg_set_bits(unsigned int bits)
+{
+ ep93xx_devcfg_set_clear(bits, 0x00);
+}
+
+static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
+{
+ ep93xx_devcfg_set_clear(0x00, bits);
+}
+
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_pwm(int pwm0, int pwm1);
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
+void ep93xx_pwm_release_gpio(struct platform_device *pdev);
+
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index ed8f35e4f06..6d661fe9d66 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -11,15 +11,13 @@ static inline void arch_idle(void)
static inline void arch_reset(char mode, const char *cmd)
{
- u32 devicecfg;
-
local_irq_disable();
- devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+ /*
+ * Set then clear the SWRST bit to initiate a software reset
+ */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
while (1)
;
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 411734422c1..3bd934e9a7f 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -67,7 +67,6 @@
#ifndef __ASSEMBLY__
-#include <linux/io.h>
static inline int board_is_ts7200(void)
{
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 15d6815d78c..0a313e82fb7 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -9,21 +9,16 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
#include <linux/kernel.h>
-#include <linux/mm.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
-#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
static struct ep93xx_eth_data micro9_eth_data = {
.phy_id = 0x1f,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index aaf1371412a..259f7822ba5 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -12,19 +12,18 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/m48t86.h>
#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/m48t86.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+#include <mach/ts72xx.h>
+
#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
static struct map_desc ts72xx_io_desc[] __initdata = {
{
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index 1251319ef9a..d795642fad2 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -36,8 +36,12 @@
#define PCIO_BASE PCI_IO_VADDR
#define PCIMEM_BASE PCI_MEMORY_VADDR
+#ifdef CONFIG_MMU
/* macro to get at IO space when running virtually */
#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE)
+#else
+#define IO_ADDRESS(x) (x)
+#endif
#define pcibios_assign_all_busses() 1
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4ac04055c2e..2a318eba1b0 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -49,14 +49,14 @@
#define INTCP_PA_CLCD_BASE 0xc0000000
-#define INTCP_VA_CIC_BASE 0xf1000040
-#define INTCP_VA_PIC_BASE 0xf1400000
-#define INTCP_VA_SIC_BASE 0xfca00000
+#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_PIC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE)
+#define INTCP_VA_SIC_BASE IO_ADDRESS(0xca000000)
#define INTCP_PA_ETH_BASE 0xc8000000
#define INTCP_ETH_SIZE 0x10
-#define INTCP_VA_CTRL_BASE 0xfcb00000
+#define INTCP_VA_CTRL_BASE IO_ADDRESS(0xcb000000)
#define INTCP_FLASHPROG 0x04
#define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0)
#define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1)
@@ -121,12 +121,12 @@ static struct map_desc intcp_io_desc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE
}, {
- .virtual = 0xfca00000,
+ .virtual = IO_ADDRESS(0xca000000),
.pfn = __phys_to_pfn(0xca000000),
.length = SZ_4K,
.type = MT_DEVICE
}, {
- .virtual = 0xfcb00000,
+ .virtual = IO_ADDRESS(0xcb000000),
.pfn = __phys_to_pfn(0xcb000000),
.length = SZ_4K,
.type = MT_DEVICE
@@ -394,8 +394,8 @@ static struct platform_device *intcp_devs[] __initdata = {
*/
static unsigned int mmc_status(struct device *dev)
{
- unsigned int status = readl(0xfca00004);
- writel(8, 0xfcb00008);
+ unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
+ writel(8, IO_ADDRESS(0xcb000000) + 8);
return status & 8;
}
@@ -403,6 +403,8 @@ static unsigned int mmc_status(struct device *dev)
static struct mmc_platform_data mmc_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
+ .gpio_wp = -1,
+ .gpio_cd = -1,
};
static struct amba_device mmc_device = {
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 25100f7acf4..0aca451b216 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -38,6 +38,12 @@ config MACH_TS219
Say 'Y' here if you want your kernel to support the
QNAP TS-119 and TS-219 Turbo NAS devices.
+config MACH_OPENRD_BASE
+ bool "Marvell OpenRD Base Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell OpenRD Base Board.
+
endmenu
endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 9dd680e964d..80ab0ec90ee 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -6,5 +6,6 @@ obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
+obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0f691983801..0acb61f3c10 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -838,7 +838,8 @@ int __init kirkwood_find_tclk(void)
u32 dev, rev;
kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6281_DEV_ID && rev == MV88F6281_REV_A0)
+ if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+ rev == MV88F6281_REV_A1))
return 200000000;
return 166666667;
@@ -872,6 +873,8 @@ static char * __init kirkwood_id(void)
return "MV88F6281-Z0";
else if (rev == MV88F6281_REV_A0)
return "MV88F6281-A0";
+ else if (rev == MV88F6281_REV_A1)
+ return "MV88F6281-A1";
else
return "MV88F6281-Rev-Unsupported";
} else if (dev == MV88F6192_DEV_ID) {
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 07af858814a..54c132731d2 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -101,6 +101,7 @@
#define MV88F6281_DEV_ID 0x6281
#define MV88F6281_REV_Z0 0
#define MV88F6281_REV_A0 2
+#define MV88F6281_REV_A1 3
#define MV88F6192_DEV_ID 0x6192
#define MV88F6192_REV_Z0 0
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
new file mode 100644
index 00000000000..947dfb8cd5b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/mach-kirkwood/openrd_base-setup.c
+ *
+ * Marvell OpenRD Base Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_base_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data openrd_base_sata_data = {
+ .n_ports = 2,
+};
+
+static struct mvsdio_platform_data openrd_base_mvsdio_data = {
+ .gpio_card_detect = 29, /* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_base_mpp_config[] __initdata = {
+ MPP29_GPIO,
+ 0
+};
+
+static void __init openrd_base_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(openrd_base_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
+
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&openrd_base_ge00_data);
+ kirkwood_sata_init(&openrd_base_sata_data);
+ kirkwood_sdio_init(&openrd_base_mvsdio_data);
+}
+
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+ /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = openrd_base_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 0d0f306851d..d1b588519ad 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -18,11 +18,14 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/list.h>
#include <linux/math64.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <asm/clkdev.h>
+
#include <mach/clock.h>
#include <mach/hardware.h>
#include <mach/common.h>
@@ -94,7 +97,6 @@ static unsigned long clk16m_get_rate(struct clk *clk)
}
static struct clk clk16m = {
- .name = "CLK16M",
.get_rate = clk16m_get_rate,
.enable = _clk_enable,
.enable_reg = CCM_CSCR,
@@ -111,7 +113,6 @@ static unsigned long clk32_get_rate(struct clk *clk)
}
static struct clk clk32 = {
- .name = "CLK32",
.get_rate = clk32_get_rate,
};
@@ -121,7 +122,6 @@ static unsigned long clk32_premult_get_rate(struct clk *clk)
}
static struct clk clk32_premult = {
- .name = "CLK32_premultiplier",
.parent = &clk32,
.get_rate = clk32_premult_get_rate,
};
@@ -156,7 +156,6 @@ static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
}
static struct clk prem_clk = {
- .name = "prem_clk",
.set_parent = prem_clk_set_parent,
};
@@ -167,7 +166,6 @@ static unsigned long system_clk_get_rate(struct clk *clk)
}
static struct clk system_clk = {
- .name = "system_clk",
.parent = &prem_clk,
.get_rate = system_clk_get_rate,
};
@@ -179,7 +177,6 @@ static unsigned long mcu_clk_get_rate(struct clk *clk)
}
static struct clk mcu_clk = {
- .name = "mcu_clk",
.parent = &clk32_premult,
.get_rate = mcu_clk_get_rate,
};
@@ -195,7 +192,6 @@ static unsigned long fclk_get_rate(struct clk *clk)
}
static struct clk fclk = {
- .name = "fclk",
.parent = &mcu_clk,
.get_rate = fclk_get_rate,
};
@@ -238,7 +234,6 @@ static int hclk_set_rate(struct clk *clk, unsigned long rate)
}
static struct clk hclk = {
- .name = "hclk",
.parent = &system_clk,
.get_rate = hclk_get_rate,
.round_rate = hclk_round_rate,
@@ -280,7 +275,6 @@ static int clk48m_set_rate(struct clk *clk, unsigned long rate)
}
static struct clk clk48m = {
- .name = "CLK48M",
.parent = &system_clk,
.get_rate = clk48m_get_rate,
.round_rate = clk48m_round_rate,
@@ -400,21 +394,18 @@ static int perclk3_set_rate(struct clk *clk, unsigned long rate)
static struct clk perclk[] = {
{
- .name = "perclk",
.id = 0,
.parent = &system_clk,
.get_rate = perclk1_get_rate,
.round_rate = perclk1_round_rate,
.set_rate = perclk1_set_rate,
}, {
- .name = "perclk",
.id = 1,
.parent = &system_clk,
.get_rate = perclk2_get_rate,
.round_rate = perclk2_round_rate,
.set_rate = perclk2_set_rate,
}, {
- .name = "perclk",
.id = 2,
.parent = &system_clk,
.get_rate = perclk3_get_rate,
@@ -457,12 +448,10 @@ static int clko_set_parent(struct clk *clk, struct clk *parent)
}
static struct clk clko_clk = {
- .name = "clko_clk",
.set_parent = clko_set_parent,
};
static struct clk dma_clk = {
- .name = "dma",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
@@ -473,7 +462,6 @@ static struct clk dma_clk = {
};
static struct clk csi_clk = {
- .name = "csi_clk",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
@@ -484,7 +472,6 @@ static struct clk csi_clk = {
};
static struct clk mma_clk = {
- .name = "mma_clk",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
@@ -495,7 +482,6 @@ static struct clk mma_clk = {
};
static struct clk usbd_clk = {
- .name = "usbd_clk",
.parent = &clk48m,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
@@ -506,99 +492,85 @@ static struct clk usbd_clk = {
};
static struct clk gpt_clk = {
- .name = "gpt_clk",
.parent = &perclk[0],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk uart_clk = {
- .name = "uart",
.parent = &perclk[0],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk i2c_clk = {
- .name = "i2c_clk",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk spi_clk = {
- .name = "spi_clk",
.parent = &perclk[1],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk sdhc_clk = {
- .name = "sdhc_clk",
.parent = &perclk[1],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk lcdc_clk = {
- .name = "lcdc_clk",
.parent = &perclk[1],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk mshc_clk = {
- .name = "mshc_clk",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk ssi_clk = {
- .name = "ssi_clk",
.parent = &perclk[2],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk rtc_clk = {
- .name = "rtc_clk",
.parent = &clk32,
};
-static struct clk *mxc_clks[] = {
- &clk16m,
- &clk32,
- &clk32_premult,
- &prem_clk,
- &system_clk,
- &mcu_clk,
- &fclk,
- &hclk,
- &clk48m,
- &perclk[0],
- &perclk[1],
- &perclk[2],
- &clko_clk,
- &dma_clk,
- &csi_clk,
- &mma_clk,
- &usbd_clk,
- &gpt_clk,
- &uart_clk,
- &i2c_clk,
- &spi_clk,
- &sdhc_clk,
- &lcdc_clk,
- &mshc_clk,
- &ssi_clk,
- &rtc_clk,
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+static struct clk_lookup lookups[] __initdata = {
+ _REGISTER_CLOCK(NULL, "dma", dma_clk)
+ _REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
+ _REGISTER_CLOCK(NULL, "mma", mma_clk)
+ _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
+ _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
+ _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
+ _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+ _REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+ _REGISTER_CLOCK(NULL, "ssi", ssi_clk)
+ _REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
};
int __init mx1_clocks_init(unsigned long fref)
{
- struct clk **clkp;
unsigned int reg;
+ int i;
/* disable clocks we are able to */
__raw_writel(0, SCM_GCCR);
@@ -620,13 +592,13 @@ int __init mx1_clocks_init(unsigned long fref)
reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
clko_clk.parent = (struct clk *)clko_clocks[reg];
- for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
- clk_register(*clkp);
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
clk_enable(&hclk);
clk_enable(&fclk);
- mxc_timer_init(&gpt_clk);
+ mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
return 0;
}
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index 76d1ffb4807..b6be29d1cb0 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -29,12 +29,11 @@
#include "devices.h"
static struct resource imx_csi_resources[] = {
- [0] = {
+ {
.start = 0x00224000,
.end = 0x00224010,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = CSI_INT,
.end = CSI_INT,
.flags = IORESOURCE_IRQ,
@@ -55,12 +54,11 @@ struct platform_device imx_csi_device = {
};
static struct resource imx_i2c_resources[] = {
- [0] = {
+ {
.start = 0x00217000,
.end = 0x00217010,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = I2C_INT,
.end = I2C_INT,
.flags = IORESOURCE_IRQ,
@@ -75,22 +73,19 @@ struct platform_device imx_i2c_device = {
};
static struct resource imx_uart1_resources[] = {
- [0] = {
+ {
.start = UART1_BASE_ADDR,
.end = UART1_BASE_ADDR + 0xD0,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = UART1_MINT_RX,
.end = UART1_MINT_RX,
.flags = IORESOURCE_IRQ,
- },
- [2] = {
+ }, {
.start = UART1_MINT_TX,
.end = UART1_MINT_TX,
.flags = IORESOURCE_IRQ,
- },
- [3] = {
+ }, {
.start = UART1_MINT_RTS,
.end = UART1_MINT_RTS,
.flags = IORESOURCE_IRQ,
@@ -105,22 +100,19 @@ struct platform_device imx_uart1_device = {
};
static struct resource imx_uart2_resources[] = {
- [0] = {
+ {
.start = UART2_BASE_ADDR,
.end = UART2_BASE_ADDR + 0xD0,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = UART2_MINT_RX,
.end = UART2_MINT_RX,
.flags = IORESOURCE_IRQ,
- },
- [2] = {
+ }, {
.start = UART2_MINT_TX,
.end = UART2_MINT_TX,
.flags = IORESOURCE_IRQ,
- },
- [3] = {
+ }, {
.start = UART2_MINT_RTS,
.end = UART2_MINT_RTS,
.flags = IORESOURCE_IRQ,
@@ -135,17 +127,15 @@ struct platform_device imx_uart2_device = {
};
static struct resource imx_rtc_resources[] = {
- [0] = {
+ {
.start = 0x00204000,
.end = 0x00204024,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = RTC_INT,
.end = RTC_INT,
.flags = IORESOURCE_IRQ,
- },
- [2] = {
+ }, {
.start = RTC_SAMINT,
.end = RTC_SAMINT,
.flags = IORESOURCE_IRQ,
@@ -160,12 +150,11 @@ struct platform_device imx_rtc_device = {
};
static struct resource imx_wdt_resources[] = {
- [0] = {
+ {
.start = 0x00201000,
.end = 0x00201008,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = WDT_INT,
.end = WDT_INT,
.flags = IORESOURCE_IRQ,
@@ -180,42 +169,35 @@ struct platform_device imx_wdt_device = {
};
static struct resource imx_usb_resources[] = {
- [0] = {
+ {
.start = 0x00212000,
.end = 0x00212148,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = USBD_INT0,
.end = USBD_INT0,
.flags = IORESOURCE_IRQ,
- },
- [2] = {
+ }, {
.start = USBD_INT1,
.end = USBD_INT1,
.flags = IORESOURCE_IRQ,
- },
- [3] = {
+ }, {
.start = USBD_INT2,
.end = USBD_INT2,
.flags = IORESOURCE_IRQ,
- },
- [4] = {
+ }, {
.start = USBD_INT3,
.end = USBD_INT3,
.flags = IORESOURCE_IRQ,
- },
- [5] = {
+ }, {
.start = USBD_INT4,
.end = USBD_INT4,
.flags = IORESOURCE_IRQ,
- },
- [6] = {
+ }, {
.start = USBD_INT5,
.end = USBD_INT5,
.flags = IORESOURCE_IRQ,
- },
- [7] = {
+ }, {
.start = USBD_INT6,
.end = USBD_INT6,
.flags = IORESOURCE_IRQ,
@@ -231,29 +213,26 @@ struct platform_device imx_usb_device = {
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
- [0] = {
+ {
.chip.label = "gpio-0",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
.irq = GPIO_INT_PORTA,
- .virtual_irq_start = MXC_GPIO_IRQ_START
- },
- [1] = {
+ .virtual_irq_start = MXC_GPIO_IRQ_START,
+ }, {
.chip.label = "gpio-1",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
.irq = GPIO_INT_PORTB,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32
- },
- [2] = {
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+ }, {
.chip.label = "gpio-2",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
.irq = GPIO_INT_PORTC,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 64
- },
- [3] = {
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+ }, {
.chip.label = "gpio-3",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
.irq = GPIO_INT_PORTD,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 96
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
}
};
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 7622c9b38c9..7f9fc1034c0 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -41,6 +41,13 @@ static struct map_desc imx_io_desc[] __initdata = {
void __init mx1_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX1);
+ mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
}
+
+void __init mx1_init_irq(void)
+{
+ mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e5b0c0a83c3..30f04e56faf 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -104,12 +104,10 @@ static struct imxi2c_platform_data mx1ads_i2c_data = {
static struct i2c_board_info mx1ads_i2c_devices[] = {
{
- I2C_BOARD_INFO("pcf857x", 0x22),
- .type = "pcf8575",
+ I2C_BOARD_INFO("pcf8575", 0x22),
.platform_data = &pcf857x_data[0],
}, {
- I2C_BOARD_INFO("pcf857x", 0x24),
- .type = "pcf8575",
+ I2C_BOARD_INFO("pcf8575", 0x24),
.platform_data = &pcf857x_data[1],
},
};
@@ -151,7 +149,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx1_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
MACHINE_END
@@ -161,7 +159,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx1_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
MACHINE_END
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 20e0b5bcdff..325d98df605 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -68,22 +68,20 @@ static struct dm9000_plat_data dm9000_platdata = {
* to gain access to address latch registers and the data path.
*/
static struct resource dm9000x_resources[] = {
- [0] = {
+ {
.name = "address area",
.start = IMX_CS5_PHYS,
.end = IMX_CS5_PHYS + 1,
- .flags = IORESOURCE_MEM /* address access */
- },
- [1] = {
+ .flags = IORESOURCE_MEM, /* address access */
+ }, {
.name = "data area",
.start = IMX_CS5_PHYS + 4,
.end = IMX_CS5_PHYS + 5,
- .flags = IORESOURCE_MEM /* data access */
- },
- [2] = {
+ .flags = IORESOURCE_MEM, /* data access */
+ }, {
.start = IRQ_GPIOC(3),
.end = IRQ_GPIOC(3),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -154,7 +152,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
.io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
.boot_params = 0x08000100,
.map_io = mx1_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx1_init_irq,
.timer = &scb9328_timer,
.init_machine = scb9328_init,
MACHINE_END
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c77da586b71..c8a2eac4d13 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -53,6 +53,34 @@ config MACH_PCM970_BASEBOARD
endchoice
+config MACH_EUKREA_CPUIMX27
+ bool "Eukrea CPUIMX27 module"
+ depends on MACH_MX27
+ help
+ Include support for Eukrea CPUIMX27 platform. This includes
+ specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+ bool "CPUIMX27 integrates SDHC2 module"
+ depends on MACH_EUKREA_CPUIMX27
+ help
+ This adds support for the internal SDHC2 used on CPUIMX27 used
+ for wifi or eMMC.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX27
+ default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+ prompt "Eukrea MBIMX27 development board"
+ bool
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMX27 evaluation board.
+
+endchoice
+
config MACH_MX27_3DS
bool "MX27PDK platform"
depends on MACH_MX27
@@ -67,4 +95,11 @@ config MACH_MX27LITE
Include support for MX27 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
+config MACH_PCA100
+ bool "Phytec phyCARD-s (pca100)"
+ depends on MACH_MX27
+ help
+ Include support for phyCARD-s (aka pca100) platform. This
+ includes specific configurations for the module and its peripherals.
+
endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index b9b1cca4e9b..19560f04563 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -17,4 +17,7 @@ obj-$(CONFIG_MACH_PCM038) += pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += pca100.o
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 0850fb88ec1..eede79855f4 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1004,6 +1004,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
clk_enable(&uart_clk[0]);
#endif
- mxc_timer_init(&gpt_clk[0]);
+ mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
return 0;
}
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 2c971442f3f..4089951acb4 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -643,7 +643,14 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
- _REGISTER_CLOCK(NULL, "usb", usb_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
@@ -748,7 +755,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk_enable(&uart1_clk);
#endif
- mxc_timer_init(&gpt1_clk);
+ mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
return 0;
}
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a0f1b367432..50199aff014 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -40,45 +40,87 @@
#include "devices.h"
/*
- * Resource definition for the MXC IrDA
+ * SPI master controller
+ *
+ * - i.MX1: 2 channel (slighly different register setting)
+ * - i.MX21: 2 channel
+ * - i.MX27: 3 channel
*/
-static struct resource mxc_irda_resources[] = {
- [0] = {
- .start = UART3_BASE_ADDR,
- .end = UART3_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
+static struct resource mxc_spi_resources0[] = {
+ {
+ .start = CSPI1_BASE_ADDR,
+ .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI1,
+ .end = MXC_INT_CSPI1,
+ .flags = IORESOURCE_IRQ,
},
- [1] = {
- .start = MXC_INT_UART3,
- .end = MXC_INT_UART3,
- .flags = IORESOURCE_IRQ,
+};
+
+static struct resource mxc_spi_resources1[] = {
+ {
+ .start = CSPI2_BASE_ADDR,
+ .end = CSPI2_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI2,
+ .end = MXC_INT_CSPI2,
+ .flags = IORESOURCE_IRQ,
},
};
-/* Platform Data for MXC IrDA */
-struct platform_device mxc_irda_device = {
- .name = "mxc_irda",
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_spi_resources2[] = {
+ {
+ .start = CSPI3_BASE_ADDR,
+ .end = CSPI3_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI3,
+ .end = MXC_INT_CSPI3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+#endif
+
+struct platform_device mxc_spi_device0 = {
+ .name = "spi_imx",
.id = 0,
- .num_resources = ARRAY_SIZE(mxc_irda_resources),
- .resource = mxc_irda_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources0),
+ .resource = mxc_spi_resources0,
+};
+
+struct platform_device mxc_spi_device1 = {
+ .name = "spi_imx",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources1),
+ .resource = mxc_spi_resources1,
+};
+
+#ifdef CONFIG_MACH_MX27
+struct platform_device mxc_spi_device2 = {
+ .name = "spi_imx",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources2),
+ .resource = mxc_spi_resources2,
};
+#endif
/*
* General Purpose Timer
- * - i.MX1: 2 timer (slighly different register handling)
- * - i.MX21: 3 timer
- * - i.MX27: 6 timer
+ * - i.MX21: 3 timers
+ * - i.MX27: 6 timers
*/
/* We use gpt0 as system timer, so do not add a device for this one */
static struct resource timer1_resources[] = {
- [0] = {
+ {
.start = GPT2_BASE_ADDR,
.end = GPT2_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_GPT2,
.end = MXC_INT_GPT2,
.flags = IORESOURCE_IRQ,
@@ -89,16 +131,15 @@ struct platform_device mxc_gpt1 = {
.name = "imx_gpt",
.id = 1,
.num_resources = ARRAY_SIZE(timer1_resources),
- .resource = timer1_resources
+ .resource = timer1_resources,
};
static struct resource timer2_resources[] = {
- [0] = {
+ {
.start = GPT3_BASE_ADDR,
.end = GPT3_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_GPT3,
.end = MXC_INT_GPT3,
.flags = IORESOURCE_IRQ,
@@ -109,17 +150,16 @@ struct platform_device mxc_gpt2 = {
.name = "imx_gpt",
.id = 2,
.num_resources = ARRAY_SIZE(timer2_resources),
- .resource = timer2_resources
+ .resource = timer2_resources,
};
#ifdef CONFIG_MACH_MX27
static struct resource timer3_resources[] = {
- [0] = {
+ {
.start = GPT4_BASE_ADDR,
.end = GPT4_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_GPT4,
.end = MXC_INT_GPT4,
.flags = IORESOURCE_IRQ,
@@ -130,16 +170,15 @@ struct platform_device mxc_gpt3 = {
.name = "imx_gpt",
.id = 3,
.num_resources = ARRAY_SIZE(timer3_resources),
- .resource = timer3_resources
+ .resource = timer3_resources,
};
static struct resource timer4_resources[] = {
- [0] = {
+ {
.start = GPT5_BASE_ADDR,
.end = GPT5_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_GPT5,
.end = MXC_INT_GPT5,
.flags = IORESOURCE_IRQ,
@@ -150,16 +189,15 @@ struct platform_device mxc_gpt4 = {
.name = "imx_gpt",
.id = 4,
.num_resources = ARRAY_SIZE(timer4_resources),
- .resource = timer4_resources
+ .resource = timer4_resources,
};
static struct resource timer5_resources[] = {
- [0] = {
+ {
.start = GPT6_BASE_ADDR,
.end = GPT6_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_GPT6,
.end = MXC_INT_GPT6,
.flags = IORESOURCE_IRQ,
@@ -170,7 +208,7 @@ struct platform_device mxc_gpt5 = {
.name = "imx_gpt",
.id = 5,
.num_resources = ARRAY_SIZE(timer5_resources),
- .resource = timer5_resources
+ .resource = timer5_resources,
};
#endif
@@ -214,11 +252,11 @@ static struct resource mxc_nand_resources[] = {
{
.start = NFC_BASE_ADDR,
.end = NFC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_NANDFC,
.end = MXC_INT_NANDFC,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
},
};
@@ -240,8 +278,7 @@ static struct resource mxc_fb[] = {
.start = LCDC_BASE_ADDR,
.end = LCDC_BASE_ADDR + 0xFFF,
.flags = IORESOURCE_MEM,
- },
- {
+ }, {
.start = MXC_INT_LCDC,
.end = MXC_INT_LCDC,
.flags = IORESOURCE_IRQ,
@@ -264,11 +301,11 @@ static struct resource mxc_fec_resources[] = {
{
.start = FEC_BASE_ADDR,
.end = FEC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_FEC,
.end = MXC_INT_FEC,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
},
};
@@ -281,15 +318,14 @@ struct platform_device mxc_fec_device = {
#endif
static struct resource mxc_i2c_1_resources[] = {
- [0] = {
+ {
.start = I2C_BASE_ADDR,
.end = I2C_BASE_ADDR + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_I2C,
.end = MXC_INT_I2C,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
}
};
@@ -297,20 +333,19 @@ struct platform_device mxc_i2c_device0 = {
.name = "imx-i2c",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
- .resource = mxc_i2c_1_resources
+ .resource = mxc_i2c_1_resources,
};
#ifdef CONFIG_MACH_MX27
static struct resource mxc_i2c_2_resources[] = {
- [0] = {
+ {
.start = I2C2_BASE_ADDR,
.end = I2C2_BASE_ADDR + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_I2C2,
.end = MXC_INT_I2C2,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
}
};
@@ -318,17 +353,16 @@ struct platform_device mxc_i2c_device1 = {
.name = "imx-i2c",
.id = 1,
.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
- .resource = mxc_i2c_2_resources
+ .resource = mxc_i2c_2_resources,
};
#endif
static struct resource mxc_pwm_resources[] = {
- [0] = {
+ {
.start = PWM_BASE_ADDR,
.end = PWM_BASE_ADDR + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_PWM,
.end = MXC_INT_PWM,
.flags = IORESOURCE_IRQ,
@@ -339,28 +373,26 @@ struct platform_device mxc_pwm_device = {
.name = "mxc_pwm",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_pwm_resources),
- .resource = mxc_pwm_resources
+ .resource = mxc_pwm_resources,
};
/*
* Resource definition for the MXC SDHC
*/
static struct resource mxc_sdhc1_resources[] = {
- [0] = {
- .start = SDHC1_BASE_ADDR,
- .end = SDHC1_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MXC_INT_SDHC1,
- .end = MXC_INT_SDHC1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = DMA_REQ_SDHC1,
- .end = DMA_REQ_SDHC1,
- .flags = IORESOURCE_DMA
- },
+ {
+ .start = SDHC1_BASE_ADDR,
+ .end = SDHC1_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_SDHC1,
+ .end = MXC_INT_SDHC1,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = DMA_REQ_SDHC1,
+ .end = DMA_REQ_SDHC1,
+ .flags = IORESOURCE_DMA,
+ },
};
static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
@@ -377,21 +409,19 @@ struct platform_device mxc_sdhc_device0 = {
};
static struct resource mxc_sdhc2_resources[] = {
- [0] = {
- .start = SDHC2_BASE_ADDR,
- .end = SDHC2_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MXC_INT_SDHC2,
- .end = MXC_INT_SDHC2,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = DMA_REQ_SDHC2,
- .end = DMA_REQ_SDHC2,
- .flags = IORESOURCE_DMA
- },
+ {
+ .start = SDHC2_BASE_ADDR,
+ .end = SDHC2_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_SDHC2,
+ .end = MXC_INT_SDHC2,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = DMA_REQ_SDHC2,
+ .end = DMA_REQ_SDHC2,
+ .flags = IORESOURCE_DMA,
+ },
};
static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
@@ -407,35 +437,123 @@ struct platform_device mxc_sdhc_device1 = {
.resource = mxc_sdhc2_resources,
};
+#ifdef CONFIG_MACH_MX27
+static struct resource otg_resources[] = {
+ {
+ .start = OTG_BASE_ADDR,
+ .end = OTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB3,
+ .end = MXC_INT_USB3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 otg_dmamask = 0xffffffffUL;
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+ .name = "fsl-usb2-udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &otg_dmamask,
+ .coherent_dma_mask = 0xffffffffUL,
+ },
+ .resource = otg_resources,
+ .num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* OTG host */
+struct platform_device mxc_otg_host = {
+ .name = "mxc-ehci",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &otg_dmamask,
+ },
+ .resource = otg_resources,
+ .num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh1_resources[] = {
+ {
+ .start = OTG_BASE_ADDR + 0x200,
+ .end = OTG_BASE_ADDR + 0x3ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB1,
+ .end = MXC_INT_USB1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh1 = {
+ .name = "mxc-ehci",
+ .id = 1,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &usbh1_dmamask,
+ },
+ .resource = mxc_usbh1_resources,
+ .num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh2_resources[] = {
+ {
+ .start = OTG_BASE_ADDR + 0x400,
+ .end = OTG_BASE_ADDR + 0x5ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB2,
+ .end = MXC_INT_USB2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh2 = {
+ .name = "mxc-ehci",
+ .id = 2,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &usbh2_dmamask,
+ },
+ .resource = mxc_usbh2_resources,
+ .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+#endif
+
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
- [0] = {
+ {
.chip.label = "gpio-0",
.irq = MXC_INT_GPIO,
.base = IO_ADDRESS(GPIO_BASE_ADDR),
.virtual_irq_start = MXC_GPIO_IRQ_START,
- },
- [1] = {
+ }, {
.chip.label = "gpio-1",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- },
- [2] = {
+ }, {
.chip.label = "gpio-2",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
- },
- [3] = {
+ }, {
.chip.label = "gpio-3",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
- },
- [4] = {
+ }, {
.chip.label = "gpio-4",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
- },
- [5] = {
+ }, {
.chip.label = "gpio-5",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 049005bb6aa..d315406d672 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -4,7 +4,6 @@ extern struct platform_device mxc_gpt3;
extern struct platform_device mxc_gpt4;
extern struct platform_device mxc_gpt5;
extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_irda_device;
extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
extern struct platform_device mxc_uart_device2;
@@ -20,3 +19,11 @@ extern struct platform_device mxc_i2c_device0;
extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_sdhc_device0;
extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
new file mode 100644
index 00000000000..7b187606682
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART4 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C1 */
+ PD17_PF_I2C_DATA,
+ PD18_PF_I2C_CLK,
+ /* SDHC2 */
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+ /* Quad UART's IRQ */
+ GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+ GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+ GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+ GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+ .width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc3ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &eukrea_cpuimx27_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &eukrea_cpuimx27_nor_mtd_device,
+ &mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+ .bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ },
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+ .irq = IRQ_GPIOB(23),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+ .irq = IRQ_GPIOB(22),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+ .irq = IRQ_GPIOB(27),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+ .irq = IRQ_GPIOB(30),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ }
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+ mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+ ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+ mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+
+ i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+ ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+ /* SDHC2 can be used for Wifi */
+ mxc_register_device(&mxc_sdhc_device1, NULL);
+ /* in which case UART4 is also used for Bluetooth */
+ mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+ platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+ eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+ .init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = eukrea_cpuimx27_init,
+ .timer = &eukrea_cpuimx27_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
new file mode 100644
index 00000000000..7382b6d27ee
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static int eukrea_mbimx27_pins[] = {
+ /* UART2 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART3 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* UART4 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+ /* SDHC1*/
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ /* display */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /* SPI1 */
+ PD28_PF_CSPI1_SS0,
+ PD29_PF_CSPI1_SCLK,
+ PD30_PF_CSPI1_MISO,
+ PD31_PF_CSPI1_MOSI,
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "led1",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ .gpio = GPIO_PORTF | 16,
+ },
+ {
+ .name = "led2",
+ .default_trigger = "none",
+ .active_low = 1,
+ .gpio = GPIO_PORTF | 19,
+ },
+ {
+ .name = "backlight",
+ .default_trigger = "backlight",
+ .active_low = 0,
+ .gpio = GPIO_PORTE | 5,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+ {
+ .mode = {
+ .name = "CMO-QGVA",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .pixclock = 156000,
+ .hsync_len = 30,
+ .left_margin = 38,
+ .right_margin = 20,
+ .vsync_len = 3,
+ .upper_margin = 15,
+ .lower_margin = 4,
+ },
+ .pcr = 0xFAD08B80,
+ .bpp = 16,
+ },
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+ .mode = eukrea_mbimx27_modes,
+ .num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00040060,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+ printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+ return;
+ }
+
+ gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+};
+
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+ [0] = {
+ .modalias = "ads7846",
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .irq = IRQ_GPIOD(25),
+ .platform_data = &ads7846_config,
+ .mode = SPI_MODE_2,
+ },
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+ .chipselect = eukrea_mbimx27_spi_cs,
+ .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct platform_device *platform_devices[] __initdata = {
+ &leds_gpio,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+ mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+ ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+
+ mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, NULL);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ /* SPI and ADS7846 Touchscreen controler init */
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+ mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+ spi_register_board_info(eukrea_mbimx27_spi_board_info,
+ ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+ ads7846_dev_init();
+#endif
+
+ /* Leds configuration */
+ mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+ /* Backlight */
+ mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 169372f69d8..ae8f759134d 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -72,6 +72,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
void __init mx21_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX21);
+ mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
@@ -79,7 +80,18 @@ void __init mx21_map_io(void)
void __init mx27_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX27);
+ mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+void __init mx27_init_irq(void)
+{
+ mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx21_init_irq(void)
+{
+ mx27_init_irq();
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a5ee461cb40..cf5f77cbc2f 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -164,25 +164,33 @@ static void mx21ads_fb_exit(struct platform_device *pdev)
* Connected is a portrait Sharp-QVGA display
* of type: LQ035Q7DB02
*/
-static struct imx_fb_platform_data mx21ads_fb_data = {
- .pixclock = 188679, /* in ps */
- .xres = 240,
- .yres = 320,
-
- .bpp = 16,
- .hsync_len = 2,
- .left_margin = 6,
- .right_margin = 16,
+static struct imx_fb_videomode mx21ads_modes[] = {
+ {
+ .mode = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .hsync_len = 2,
+ .left_margin = 6,
+ .right_margin = 16,
+ .vsync_len = 1,
+ .upper_margin = 8,
+ .lower_margin = 10,
+ },
+ .pcr = 0xfb108bc7,
+ .bpp = 16,
+ },
+};
- .vsync_len = 1,
- .upper_margin = 8,
- .lower_margin = 10,
- .fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx21ads_fb_data = {
+ .mode = mx21ads_modes,
+ .num_modes = ARRAY_SIZE(mx21ads_modes),
- .pcr = 0xFB108BC7,
- .pwmr = 0x00A901ff,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020008,
+ .pwmr = 0x00a903ff,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020008,
.init = mx21ads_fb_init,
.exit = mx21ads_fb_exit,
@@ -280,7 +288,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx21ads_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx21_init_irq,
.init_machine = mx21ads_board_init,
.timer = &mx21ads_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 02daddac699..83e412b713e 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -183,20 +183,29 @@ void lcd_power(int on)
__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
}
-static struct imx_fb_platform_data mx27ads_fb_data = {
- .pixclock = 188679,
- .xres = 240,
- .yres = 320,
-
- .bpp = 16,
- .hsync_len = 1,
- .left_margin = 9,
- .right_margin = 16,
+static struct imx_fb_videomode mx27ads_modes[] = {
+ {
+ .mode = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .hsync_len = 1,
+ .left_margin = 9,
+ .right_margin = 16,
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ },
+ .bpp = 16,
+ .pcr = 0xFB008BC0,
+ },
+};
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 9,
- .fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx27ads_fb_data = {
+ .mode = mx27ads_modes,
+ .num_modes = ARRAY_SIZE(mx27ads_modes),
/*
* - HSYNC active high
@@ -207,7 +216,6 @@ static struct imx_fb_platform_data mx27ads_fb_data = {
* - data enable low active
* - enable sharp mode
*/
- .pcr = 0xFB008BC0,
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
@@ -330,7 +338,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27ads_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx27_init_irq,
.init_machine = mx27ads_board_init,
.timer = &mx27ads_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
index 3ae11cb8c04..82ea227ea0c 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -89,7 +89,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx27_init_irq,
.init_machine = mx27lite_init,
.timer = &mx27lite_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
index 1d9238c7a6c..6761d1b79e4 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -89,7 +89,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx27_init_irq,
.init_machine = mx27pdk_init,
.timer = &mx27pdk_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
new file mode 100644
index 00000000000..fe5b165b88c
--- /dev/null
+++ b/arch/arm/mach-mx2/pca100.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static int pca100_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* SDHC */
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* SSI1 */
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ /* onboard I2C */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* external I2C */
+ PD17_PF_I2C_DATA,
+ PD18_PF_I2C_CLK,
+ /* SPI1 */
+ PD25_PF_CSPI1_RDY,
+ PD29_PF_CSPI1_SCLK,
+ PD30_PF_CSPI1_MISO,
+ PD31_PF_CSPI1_MOSI,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_w1_master_device,
+ &mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+ .bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563"
+ }, {
+ I2C_BOARD_INFO("lm75", 0x4a),
+ .type = "lm75"
+ }
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+ .name = "at25320an",
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+ {
+ .modalias = "at25",
+ .max_speed_hz = 30000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &at25320,
+ },
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+ .chipselect = pca100_spi_cs,
+ .num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = request_irq(IRQ_GPIOC(29), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "imx-mmc-detect", data);
+ if (ret)
+ printk(KERN_ERR
+ "pca100: Failed to reuest irq for sd/mmc detection\n");
+
+ return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+ .init = pca100_sdhc2_init,
+ .exit = pca100_sdhc2_exit,
+};
+
+static void __init pca100_init(void)
+{
+ int ret;
+
+ ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+ ARRAY_SIZE(pca100_pins), "PCA100");
+ if (ret)
+ printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+ mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+ mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, pca100_i2c_devices,
+ ARRAY_SIZE(pca100_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+ /* GPIO0_IRQ */
+ mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+ /* GPIO1_IRQ */
+ mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+ /* GPIO2_IRQ */
+ mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+ spi_register_board_info(pca100_spi_board_info,
+ ARRAY_SIZE(pca100_spi_board_info));
+ mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+ .init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = pca100_init,
+ .timer = &pca100_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a4628d00434..ee65dda584c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -186,17 +186,13 @@ static struct at24_platform_data board_eeprom = {
};
static struct i2c_board_info pcm038_i2c_devices[] = {
- [0] = {
+ {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
- },
- [1] = {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563"
- },
- [2] = {
+ }, {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ }, {
I2C_BOARD_INFO("lm75", 0x4a),
- .type = "lm75"
}
};
@@ -220,6 +216,9 @@ static void __init pcm038_init(void)
mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+ /* PE18 for user-LED D40 */
+ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -241,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx27_init_irq,
.init_machine = pcm038_init,
.timer = &pcm038_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 6a3acaf57dd..c261f59b0b4 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/can/platform/sja1000.h>
#include <asm/mach/arch.h>
@@ -125,40 +126,96 @@ static struct imxmmc_platform_data sdhc_pdata = {
.exit = pcm970_sdhc2_exit,
};
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DH06
- */
-static struct imx_fb_platform_data pcm038_fb_data = {
- .pixclock = 188679, /* in ps (5.3MHz) */
- .xres = 240,
- .yres = 320,
-
- .bpp = 16,
- .hsync_len = 7,
- .left_margin = 5,
- .right_margin = 16,
+static struct imx_fb_videomode pcm970_modes[] = {
+ {
+ .mode = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .hsync_len = 7,
+ .left_margin = 5,
+ .right_margin = 16,
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ },
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock not inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xF00080C0,
+ .bpp = 16,
+ }, {
+ .mode = {
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ },
+ /*
+ * - HSYNC active low (1 << 22)
+ * - VSYNC active low (1 << 23)
+ * - clk notenabled while idle
+ * - clock not inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
+ .bpp = 32,
+ },
+};
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 9,
- .fixed_screen_cpu = 0,
+static struct imx_fb_platform_data pcm038_fb_data = {
+ .mode = pcm970_modes,
+ .num_modes = ARRAY_SIZE(pcm970_modes),
- /*
- * - HSYNC active high
- * - VSYNC active high
- * - clk notenabled while idle
- * - clock not inverted
- * - data not inverted
- * - data enable low active
- * - enable sharp mode
- */
- .pcr = 0xFA0080C0,
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
};
+static struct resource pcm970_sja1000_resources[] = {
+ {
+ .start = CS4_BASE_ADDR,
+ .end = CS4_BASE_ADDR + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_GPIOE(19),
+ .end = IRQ_GPIOE(19),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+ .clock = 16000000 / 2,
+ .ocr = 0x40 | 0x18,
+ .cdr = 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+ .name = "sja1000_platform",
+ .dev = {
+ .platform_data = &pcm970_sja1000_platform_data,
+ },
+ .resource = pcm970_sja1000_resources,
+ .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
/*
* system init for baseboard usage. Will be called by pcm038 init.
*
@@ -172,4 +229,5 @@ void __init pcm970_baseboard_init(void)
mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+ platform_device_register(&pcm970_sja1000);
}
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
new file mode 100644
index 00000000000..cc28f56eae8
--- /dev/null
+++ b/arch/arm/mach-mx25/Kconfig
@@ -0,0 +1,9 @@
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+config MACH_MX25_3DS
+ select ARCH_MXC_IOMUX_V3
+ bool "Support MX25PDK (3DS) Platform"
+
+endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
new file mode 100644
index 00000000000..fe23836a9f3
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile
@@ -0,0 +1,3 @@
+obj-y := mm.o devices.o
+obj-$(CONFIG_ARCH_MX25) += clock.o
+obj-$(CONFIG_MACH_MX25_3DS) += mx25pdk.o
diff --git a/arch/arm/mach-mx25/Makefile.boot b/arch/arm/mach-mx25/Makefile.boot
new file mode 100644
index 00000000000..e1dd366f836
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x80008000
+params_phys-y := 0x80000100
+initrd_phys-y := 0x80800000
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
new file mode 100644
index 00000000000..ef26951a527
--- /dev/null
+++ b/arch/arm/mach-mx25/clock.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+
+#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL 0x00
+#define CCM_UPCTL 0x04
+#define CCM_CCTL 0x08
+#define CCM_CGCR0 0x0C
+#define CCM_CGCR1 0x10
+#define CCM_CGCR2 0x14
+#define CCM_PCDR0 0x18
+#define CCM_PCDR1 0x1C
+#define CCM_PCDR2 0x20
+#define CCM_PCDR3 0x24
+#define CCM_RCSR 0x28
+#define CCM_CRDR 0x2C
+#define CCM_DCVR0 0x30
+#define CCM_DCVR1 0x34
+#define CCM_DCVR2 0x38
+#define CCM_DCVR3 0x3c
+#define CCM_LTR0 0x40
+#define CCM_LTR1 0x44
+#define CCM_LTR2 0x48
+#define CCM_LTR3 0x4c
+
+static unsigned long get_rate_mpll(void)
+{
+ ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
+
+ return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_upll(void)
+{
+ ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
+
+ return mxc_decode_pll(mpctl, 24000000);
+}
+
+unsigned long get_rate_arm(struct clk *clk)
+{
+ unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+ unsigned long rate = get_rate_mpll();
+
+ if (cctl & (1 << 14))
+ rate = (rate * 3) >> 1;
+
+ return rate / ((cctl >> 30) + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+ unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+
+ return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+ return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_rate_per(int per)
+{
+ unsigned long ofs = (per & 0x3) * 8;
+ unsigned long reg = per & ~0x3;
+ unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
+ unsigned long fref;
+
+ if (readl(CRM_BASE + 0x64) & (1 << per))
+ fref = get_rate_upll();
+ else
+ fref = get_rate_ipg(NULL);
+
+ return fref / (val + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+ return get_rate_per(15);
+}
+
+static unsigned long get_rate_i2c(struct clk *clk)
+{
+ return get_rate_per(6);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+ return get_rate_per(8);
+}
+
+static unsigned long get_rate_otg(struct clk *clk)
+{
+ return 48000000; /* FIXME */
+}
+
+static int clk_cgcr_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 1 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void clk_cgcr_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(1 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = CRM_BASE + er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .set_rate = sr, \
+ .enable = clk_cgcr_enable, \
+ .disable = clk_cgcr_disable, \
+ }
+
+DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL);
+DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL);
+DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
+DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL);
+DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
+DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+ _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
+ _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
+ _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
+ _REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
+ _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+ _REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+ _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
+ _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+};
+
+int __init mx25_clocks_init(unsigned long fref)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+
+ return 0;
+}
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
new file mode 100644
index 00000000000..eb12de1da42
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.c
@@ -0,0 +1,402 @@
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <mach/mx25.h>
+#include <mach/irqs.h>
+
+static struct resource uart0[] = {
+ {
+ .start = 0x43f90000,
+ .end = 0x43f93fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 45,
+ .end = 45,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device0 = {
+ .name = "imx-uart",
+ .id = 0,
+ .resource = uart0,
+ .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+ {
+ .start = 0x43f94000,
+ .end = 0x43f97fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 32,
+ .end = 32,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device1 = {
+ .name = "imx-uart",
+ .id = 1,
+ .resource = uart1,
+ .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+ {
+ .start = 0x5000c000,
+ .end = 0x5000ffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 18,
+ .end = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device2 = {
+ .name = "imx-uart",
+ .id = 2,
+ .resource = uart2,
+ .num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+ {
+ .start = 0x50008000,
+ .end = 0x5000bfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 5,
+ .end = 5,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device3 = {
+ .name = "imx-uart",
+ .id = 3,
+ .resource = uart3,
+ .num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+ {
+ .start = 0x5002c000,
+ .end = 0x5002ffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 40,
+ .end = 40,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device4 = {
+ .name = "imx-uart",
+ .id = 4,
+ .resource = uart4,
+ .num_resources = ARRAY_SIZE(uart4),
+};
+
+#define MX25_OTG_BASE_ADDR 0x53FF4000
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_otg_resources[] = {
+ {
+ .start = MX25_OTG_BASE_ADDR,
+ .end = MX25_OTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 37,
+ .end = 37,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_otg = {
+ .name = "mxc-ehci",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &otg_dmamask,
+ },
+ .resource = mxc_otg_resources,
+ .num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+/* OTG gadget device */
+struct platform_device otg_udc_device = {
+ .name = "fsl-usb2-udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &otg_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = mxc_otg_resources,
+ .num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+static u64 usbh2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_usbh2_resources[] = {
+ {
+ .start = MX25_OTG_BASE_ADDR + 0x400,
+ .end = MX25_OTG_BASE_ADDR + 0x5ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 35,
+ .end = 35,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh2 = {
+ .name = "mxc-ehci",
+ .id = 1,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &usbh2_dmamask,
+ },
+ .resource = mxc_usbh2_resources,
+ .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+static struct resource mxc_spi_resources0[] = {
+ {
+ .start = 0x43fa4000,
+ .end = 0x43fa7fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 14,
+ .end = 14,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_spi_device0 = {
+ .name = "spi_imx",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources0),
+ .resource = mxc_spi_resources0,
+};
+
+static struct resource mxc_spi_resources1[] = {
+ {
+ .start = 0x50010000,
+ .end = 0x50013fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 13,
+ .end = 13,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_spi_device1 = {
+ .name = "spi_imx",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources1),
+ .resource = mxc_spi_resources1,
+};
+
+static struct resource mxc_spi_resources2[] = {
+ {
+ .start = 0x50004000,
+ .end = 0x50007fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_spi_device2 = {
+ .name = "spi_imx",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources2),
+ .resource = mxc_spi_resources2,
+};
+
+static struct resource mxc_pwm_resources0[] = {
+ {
+ .start = 0x53fe0000,
+ .end = 0x53fe3fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 26,
+ .end = 26,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_pwm_device0 = {
+ .name = "mxc_pwm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_pwm_resources0),
+ .resource = mxc_pwm_resources0,
+};
+
+static struct resource mxc_pwm_resources1[] = {
+ {
+ .start = 0x53fa0000,
+ .end = 0x53fa3fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 36,
+ .end = 36,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_pwm_device1 = {
+ .name = "mxc_pwm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_pwm_resources1),
+ .resource = mxc_pwm_resources1,
+};
+
+static struct resource mxc_pwm_resources2[] = {
+ {
+ .start = 0x53fa8000,
+ .end = 0x53fabfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 41,
+ .end = 41,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_pwm_device2 = {
+ .name = "mxc_pwm",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(mxc_pwm_resources2),
+ .resource = mxc_pwm_resources2,
+};
+
+static struct resource mxc_keypad_resources[] = {
+ {
+ .start = 0x43fa8000,
+ .end = 0x43fabfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 24,
+ .end = 24,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_keypad_device = {
+ .name = "mxc-keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mxc_keypad_resources),
+ .resource = mxc_keypad_resources,
+};
+
+static struct resource mxc_pwm_resources3[] = {
+ {
+ .start = 0x53fc8000,
+ .end = 0x53fcbfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 42,
+ .end = 42,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_pwm_device3 = {
+ .name = "mxc_pwm",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(mxc_pwm_resources3),
+ .resource = mxc_pwm_resources3,
+};
+
+static struct resource mxc_i2c_1_resources[] = {
+ {
+ .start = 0x43f80000,
+ .end = 0x43f83fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 3,
+ .end = 3,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_i2c_device0 = {
+ .name = "imx-i2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
+ .resource = mxc_i2c_1_resources,
+};
+
+static struct resource mxc_i2c_2_resources[] = {
+ {
+ .start = 0x43f98000,
+ .end = 0x43f9bfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 4,
+ .end = 4,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_i2c_device1 = {
+ .name = "imx-i2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
+ .resource = mxc_i2c_2_resources,
+};
+
+static struct resource mxc_i2c_3_resources[] = {
+ {
+ .start = 0x43f84000,
+ .end = 0x43f87fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 10,
+ .end = 10,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_i2c_device2 = {
+ .name = "imx-i2c",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
+ .resource = mxc_i2c_3_resources,
+};
+
+static struct mxc_gpio_port imx_gpio_ports[] = {
+ {
+ .chip.label = "gpio-0",
+ .base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT,
+ .irq = 52,
+ .virtual_irq_start = MXC_GPIO_IRQ_START,
+ }, {
+ .chip.label = "gpio-1",
+ .base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT,
+ .irq = 51,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+ }, {
+ .chip.label = "gpio-2",
+ .base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT,
+ .irq = 16,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+ }, {
+ .chip.label = "gpio-3",
+ .base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT,
+ .irq = 23,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+ }
+};
+
+int __init mxc_register_gpios(void)
+{
+ return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
new file mode 100644
index 00000000000..fe6bf88ad1d
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.h
@@ -0,0 +1,19 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_uart_device3;
+extern struct platform_device mxc_uart_device4;
+extern struct platform_device mxc_otg;
+extern struct platform_device otg_udc_device;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+extern struct platform_device mxc_pwm_device0;
+extern struct platform_device mxc_pwm_device1;
+extern struct platform_device mxc_pwm_device2;
+extern struct platform_device mxc_pwm_device3;
+extern struct platform_device mxc_keypad_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_i2c_device2;
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
new file mode 100644
index 00000000000..a7e587ff3e9
--- /dev/null
+++ b/arch/arm/mach-mx25/mm.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 1999,2000 Arm Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mx25.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * This table defines static virtual address mappings for I/O regions.
+ * These are the mappings common across all MX3 boards.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+ {
+ .virtual = MX25_AVIC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX25_AVIC_BASE_ADDR),
+ .length = MX25_AVIC_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = MX25_AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX25_AIPS1_BASE_ADDR),
+ .length = MX25_AIPS1_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = MX25_AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX25_AIPS2_BASE_ADDR),
+ .length = MX25_AIPS2_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ },
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx25_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX25);
+ mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx25_init_irq(void)
+{
+ mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+}
+
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
new file mode 100644
index 00000000000..92aa4fd19d9
--- /dev/null
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -0,0 +1,58 @@
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
+#include <mach/iomux-v3.h>
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static void __init mx25pdk_init(void)
+{
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_usbh2, NULL);
+ mxc_register_device(&mxc_nand_device, &nand_board_info);
+}
+
+
+static void __init mx25pdk_timer_init(void)
+{
+ mx25_clocks_init(26000000);
+}
+
+static struct sys_timer mx25pdk_timer = {
+ .init = mx25pdk_timer_init,
+};
+
+MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
+ /* Maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = MX25_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx25_map_io,
+ .init_irq = mx25_init_irq,
+ .init_machine = mx25pdk_init,
+ .timer = &mx25pdk_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index ee331fd6b1b..776c0ee1b3c 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -352,7 +352,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.map_io = mx31_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.timer = &armadillo5x0_timer,
.init_machine = armadillo5x0_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 577ee83d1f6..fe5c4217322 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -273,6 +273,19 @@ static unsigned long get_rate_csi(struct clk *clk)
return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
}
+static unsigned long get_rate_otg(struct clk *clk)
+{
+ unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+ unsigned long rate;
+
+ if (pdr4 & (1 << 9))
+ rate = get_rate_arm();
+ else
+ rate = get_rate_ppll();
+
+ return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+}
+
static unsigned long get_rate_ipg_per(struct clk *clk)
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
@@ -365,7 +378,7 @@ DEFINE_CLOCK(ssi2_clk, 1, CCM_CGR2, 14, get_rate_ssi, NULL);
DEFINE_CLOCK(uart1_clk, 0, CCM_CGR2, 16, get_rate_uart, NULL);
DEFINE_CLOCK(uart2_clk, 1, CCM_CGR2, 18, get_rate_uart, NULL);
DEFINE_CLOCK(uart3_clk, 2, CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL);
DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL);
DEFINE_CLOCK(admux_clk, 0, CCM_CGR2, 30, NULL, NULL);
@@ -426,7 +439,10 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK(NULL, "usbotg", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "max", max_clk)
_REGISTER_CLOCK(NULL, "admux", admux_clk)
@@ -456,7 +472,7 @@ int __init mx35_clocks_init()
__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
- mxc_timer_init(&gpt_clk);
+ mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
return 0;
}
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 8b14239724c..06bd6180bfc 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -29,6 +29,7 @@
#include <mach/clock.h>
#include <mach/hardware.h>
+#include <mach/mx31.h>
#include <mach/common.h>
#include "crm_regs.h"
@@ -402,6 +403,11 @@ static unsigned long clk_ckih_get_rate(struct clk *clk)
return ckih_rate;
}
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+ return CKIL_CLK_FREQ;
+}
+
static struct clk ckih_clk = {
.get_rate = clk_ckih_get_rate,
};
@@ -508,6 +514,7 @@ DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk)
DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@@ -518,9 +525,9 @@ DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
- _REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
- _REGISTER_CLOCK(NULL, "cspi", cspi3_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
@@ -531,6 +538,12 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
@@ -559,6 +572,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "iim", iim_clk)
_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+ _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
};
int __init mx31_clocks_init(unsigned long fref)
@@ -609,7 +623,7 @@ int __init mx31_clocks_init(unsigned long fref)
__raw_writel(reg, MXC_CCM_PMCR1);
}
- mxc_timer_init(&ipg_clk);
+ mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
return 0;
}
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 9e87e08fb12..8a577f36725 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -129,19 +129,17 @@ struct platform_device mxc_uart_device4 = {
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
- [0] = {
+ {
.chip.label = "gpio-0",
.base = IO_ADDRESS(GPIO1_BASE_ADDR),
.irq = MXC_INT_GPIO1,
.virtual_irq_start = MXC_GPIO_IRQ_START,
- },
- [1] = {
+ }, {
.chip.label = "gpio-1",
.base = IO_ADDRESS(GPIO2_BASE_ADDR),
.irq = MXC_INT_GPIO2,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- },
- [2] = {
+ }, {
.chip.label = "gpio-2",
.base = IO_ADDRESS(GPIO3_BASE_ADDR),
.irq = MXC_INT_GPIO3,
@@ -173,11 +171,11 @@ static struct resource mxc_nand_resources[] = {
{
.start = 0, /* runtime dependent */
.end = 0,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_NANDFC,
.end = MXC_INT_NANDFC,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
},
};
@@ -193,8 +191,7 @@ static struct resource mxc_i2c0_resources[] = {
.start = I2C_BASE_ADDR,
.end = I2C_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
- },
- {
+ }, {
.start = MXC_INT_I2C,
.end = MXC_INT_I2C,
.flags = IORESOURCE_IRQ,
@@ -213,8 +210,7 @@ static struct resource mxc_i2c1_resources[] = {
.start = I2C2_BASE_ADDR,
.end = I2C2_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
- },
- {
+ }, {
.start = MXC_INT_I2C2,
.end = MXC_INT_I2C2,
.flags = IORESOURCE_IRQ,
@@ -233,8 +229,7 @@ static struct resource mxc_i2c2_resources[] = {
.start = I2C3_BASE_ADDR,
.end = I2C3_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
- },
- {
+ }, {
.start = MXC_INT_I2C3,
.end = MXC_INT_I2C3,
.flags = IORESOURCE_IRQ,
@@ -371,8 +366,8 @@ struct platform_device mx3_camera = {
static struct resource otg_resources[] = {
{
- .start = OTG_BASE_ADDR,
- .end = OTG_BASE_ADDR + 0x1ff,
+ .start = MX31_OTG_BASE_ADDR,
+ .end = MX31_OTG_BASE_ADDR + 0x1ff,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_USB3,
@@ -395,16 +390,142 @@ struct platform_device mxc_otg_udc_device = {
.num_resources = ARRAY_SIZE(otg_resources),
};
+/* OTG host */
+struct platform_device mxc_otg_host = {
+ .name = "mxc-ehci",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &otg_dmamask,
+ },
+ .resource = otg_resources,
+ .num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh1_resources[] = {
+ {
+ .start = MX31_OTG_BASE_ADDR + 0x200,
+ .end = MX31_OTG_BASE_ADDR + 0x3ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB1,
+ .end = MXC_INT_USB1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh1 = {
+ .name = "mxc-ehci",
+ .id = 1,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &usbh1_dmamask,
+ },
+ .resource = mxc_usbh1_resources,
+ .num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh2_resources[] = {
+ {
+ .start = MX31_OTG_BASE_ADDR + 0x400,
+ .end = MX31_OTG_BASE_ADDR + 0x5ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB2,
+ .end = MXC_INT_USB2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh2 = {
+ .name = "mxc-ehci",
+ .id = 2,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &usbh2_dmamask,
+ },
+ .resource = mxc_usbh2_resources,
+ .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+/*
+ * SPI master controller
+ * 3 channels
+ */
+static struct resource imx_spi_0_resources[] = {
+ {
+ .start = CSPI1_BASE_ADDR,
+ .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI1,
+ .end = MXC_INT_CSPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource imx_spi_1_resources[] = {
+ {
+ .start = CSPI2_BASE_ADDR,
+ .end = CSPI2_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI2,
+ .end = MXC_INT_CSPI2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource imx_spi_2_resources[] = {
+ {
+ .start = CSPI3_BASE_ADDR,
+ .end = CSPI3_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI3,
+ .end = MXC_INT_CSPI3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device imx_spi_device0 = {
+ .name = "spi_imx",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(imx_spi_0_resources),
+ .resource = imx_spi_0_resources,
+};
+
+struct platform_device imx_spi_device1 = {
+ .name = "spi_imx",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(imx_spi_1_resources),
+ .resource = imx_spi_1_resources,
+};
+
+struct platform_device imx_spi_device2 = {
+ .name = "spi_imx",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(imx_spi_2_resources),
+ .resource = imx_spi_2_resources,
+};
+
#ifdef CONFIG_ARCH_MX35
static struct resource mxc_fec_resources[] = {
{
.start = MXC_FEC_BASE_ADDR,
.end = MXC_FEC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_FEC,
.end = MXC_INT_FEC,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
},
};
@@ -426,6 +547,14 @@ static int mx3_devices_init(void)
if (cpu_is_mx35()) {
mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+ otg_resources[0].start = MX35_OTG_BASE_ADDR;
+ otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
+ otg_resources[1].start = MXC_INT_USBOTG;
+ otg_resources[1].end = MXC_INT_USBOTG;
+ mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
+ mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
+ mxc_usbh1_resources[1].start = MXC_INT_USBHS;
+ mxc_usbh1_resources[1].end = MXC_INT_USBHS;
}
return 0;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index ffd494ddd4a..79f2be45d13 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -16,5 +16,11 @@ extern struct platform_device mxc_fec_device;
extern struct platform_device mxcsdhc_device0;
extern struct platform_device mxcsdhc_device1;
extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_rnga_device;
+extern struct platform_device imx_spi_device0;
+extern struct platform_device imx_spi_device1;
+extern struct platform_device imx_spi_device2;
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 1f5fdd456cb..ad5a1122d76 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -30,6 +30,7 @@
#include <mach/common.h>
#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
/*!
* @file mm.c
@@ -75,6 +76,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
void __init mx31_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
+ mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
@@ -82,10 +84,22 @@ void __init mx31_map_io(void)
void __init mx35_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
+ mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+void __init mx31_init_irq(void)
+{
+ mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx35_init_irq(void)
+{
+ mx31_init_irq();
+}
+
#ifdef CONFIG_CACHE_L2X0
static int mxc_init_l2x0(void)
{
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 30e2767a78a..0497c152be1 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -517,7 +517,7 @@ static void __init mx31ads_map_io(void)
static void __init mx31ads_init_irq(void)
{
- mxc_init_irq();
+ mx31_init_irq();
mx31ads_init_expio();
}
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 6ab2f163cb9..423025150f6 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -148,7 +148,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mx31lilly_board_init,
.timer = &mx31lilly_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 86fe70fa3e1..a8d57decdfd 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -71,12 +71,11 @@ static struct smsc911x_platform_config smsc911x_config = {
};
static struct resource smsc911x_resources[] = {
- [0] = {
+ {
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
.end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
.flags = IORESOURCE_IRQ,
@@ -162,7 +161,7 @@ MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31lite_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31lite_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index b48581e7ded..5592cdb8d0a 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,7 +16,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/fsl_devices.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -40,18 +39,6 @@ static unsigned int devboard_pins[] = {
MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
- /* USB OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
- MX31_PIN_USB_OC__GPIO1_30,
};
static struct imxuart_platform_data uart_pdata = {
@@ -111,33 +98,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
.exit = devboard_sdhc2_exit,
};
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void devboard_usbotg_init(void)
-{
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
-
- gpio_request(OTG_EN_B, "usb-udc-en");
- gpio_direction_output(OTG_EN_B, 0);
-}
-
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
@@ -151,7 +111,4 @@ void __init mx31moboard_devboard_init(void)
mxc_register_device(&mxc_uart_device1, &uart_pdata);
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
- devboard_usbotg_init();
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 901fb0166c0..2bfaffb344f 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,7 +16,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/fsl_devices.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -48,18 +47,8 @@ static unsigned int marxbot_pins[] = {
MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
MX31_PIN_TXD2__GPIO1_28,
- /* USB OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
- MX31_PIN_USB_OC__GPIO1_30,
+ /* dsPIC resets */
+ MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
};
#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -115,31 +104,20 @@ static struct imxmmc_platform_data sdhc2_pdata = {
.exit = marxbot_sdhc2_exit,
};
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_STXD5)
+#define DSPICS_RST_B IOMUX_TO_GPIO(MX31_PIN_SRXD5)
-static void marxbot_usbotg_init(void)
+static void dspics_resets_init(void)
{
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
-
- gpio_request(OTG_EN_B, "usb-udc-en");
- gpio_direction_output(OTG_EN_B, 0);
+ if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+ gpio_direction_output(TRSLAT_RST_B, 1);
+ gpio_export(TRSLAT_RST_B, false);
+ }
+
+ if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
+ gpio_direction_output(DSPICS_RST_B, 1);
+ gpio_export(DSPICS_RST_B, false);
+ }
}
/*
@@ -152,8 +130,7 @@ void __init mx31moboard_marxbot_init(void)
mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
"marxbot");
- mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+ dspics_resets_init();
- marxbot_usbotg_init();
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+ mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
}
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 2a2da4739ec..9243de54041 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,9 +16,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/delay.h>
+#include <linux/fsl_devices.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/leds.h>
#include <linux/memory.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
@@ -36,6 +39,7 @@
#include <mach/iomux-mx3.h>
#include <mach/i2c.h>
#include <mach/mmc.h>
+#include <mach/mx31.h>
#include "devices.h"
@@ -55,6 +59,26 @@ static unsigned int moboard_pins[] = {
MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+ /* USB reset */
+ MX31_PIN_GPIO1_0__GPIO1_0,
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+ MX31_PIN_USB_OC__GPIO1_30,
+ /* LEDs */
+ MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+ MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+ /* SEL */
+ MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+ MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
static struct physmap_flash_data mx31moboard_flash_data = {
@@ -142,8 +166,109 @@ static struct imxmmc_platform_data sdhc1_pdata = {
.exit = moboard_sdhc1_exit,
};
+/*
+ * this pin is dedicated for all mx31moboard systems, so we do it here
+ */
+#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+
+static void usb_xcvr_reset(void)
+{
+ gpio_request(USB_RESET_B, "usb-reset");
+ gpio_direction_output(USB_RESET_B, 0);
+ mdelay(1);
+ gpio_set_value(USB_RESET_B, 1);
+}
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void moboard_usbotg_init(void)
+{
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+ gpio_request(OTG_EN_B, "usb-udc-en");
+ gpio_direction_output(OTG_EN_B, 0);
+}
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+static struct gpio_led mx31moboard_leds[] = {
+ {
+ .name = "coreboard-led-0:red:running",
+ .default_trigger = "heartbeat",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+ }, {
+ .name = "coreboard-led-1:red",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
+ }, {
+ .name = "coreboard-led-2:red",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0),
+ }, {
+ .name = "coreboard-led-3:red",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+ },
+};
+
+static struct gpio_led_platform_data mx31moboard_led_pdata = {
+ .num_leds = ARRAY_SIZE(mx31moboard_leds),
+ .leds = mx31moboard_leds,
+};
+
+static struct platform_device mx31moboard_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mx31moboard_led_pdata,
+ },
+};
+
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void mx31moboard_init_sel_gpios(void)
+{
+ if (!gpio_request(SEL0, "sel0")) {
+ gpio_direction_input(SEL0);
+ gpio_export(SEL0, true);
+ }
+
+ if (!gpio_request(SEL1, "sel1")) {
+ gpio_direction_input(SEL1);
+ gpio_export(SEL1, true);
+ }
+
+ if (!gpio_request(SEL2, "sel2")) {
+ gpio_direction_input(SEL2);
+ gpio_export(SEL2, true);
+ }
+
+ if (!gpio_request(SEL3, "sel3")) {
+ gpio_direction_input(SEL3);
+ gpio_export(SEL3, true);
+ }
+}
+
static struct platform_device *devices[] __initdata = {
&mx31moboard_flash,
+ &mx31moboard_leds_device,
};
static int mx31moboard_baseboard;
@@ -162,11 +287,18 @@ static void __init mxc_board_init(void)
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_uart_device4, &uart_pdata);
+ mx31moboard_init_sel_gpios();
+
mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+ usb_xcvr_reset();
+
+ moboard_usbotg_init();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
break;
@@ -197,7 +329,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31moboard_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index c19838d2e36..0f7a2f06bc2 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -265,7 +265,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31pdk_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31pdk_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 6d15374414b..6ff186e46ce 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -98,7 +98,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx35_init_irq,
.init_machine = mxc_board_init,
.timer = &mx35pdk_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 840cfda341d..6cbaabedf38 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -32,6 +32,7 @@
#include <linux/spi/spi.h>
#include <linux/irq.h>
#include <linux/fsl_devices.h>
+#include <linux/can/platform/sja1000.h>
#include <media/soc_camera.h>
@@ -169,6 +170,8 @@ static unsigned int pcm037_pins[] = {
MX31_PIN_CSI_MCLK__CSI_MCLK,
MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+ /* GPIO */
+ IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
};
static struct physmap_flash_data pcm037_flash_data = {
@@ -244,12 +247,11 @@ static struct imxuart_platform_data uart_pdata = {
};
static struct resource smsc911x_resources[] = {
- [0] = {
+ {
.start = CS1_BASE_ADDR + 0x300,
.end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
.end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
@@ -339,8 +341,7 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563",
+ I2C_BOARD_INFO("pcf8563", 0x51),
}
};
@@ -515,6 +516,33 @@ static struct mx3fb_platform_data mx3fb_pdata = {
.num_modes = ARRAY_SIZE(fb_modedb),
};
+static struct resource pcm970_sja1000_resources[] = {
+ {
+ .start = CS5_BASE_ADDR,
+ .end = CS5_BASE_ADDR + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+ .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+ .clock = 16000000 / 2,
+ .ocr = 0x40 | 0x18,
+ .cdr = 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+ .name = "sja1000_platform",
+ .dev = {
+ .platform_data = &pcm970_sja1000_platform_data,
+ },
+ .resource = pcm970_sja1000_resources,
+ .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
/*
* Board specific initialization.
*/
@@ -575,6 +603,8 @@ static void __init mxc_board_init(void)
if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
mxc_register_device(&mx3_camera, &camera_pdata);
+
+ platform_device_register(&pcm970_sja1000);
}
static void __init pcm037_timer_init(void)
@@ -592,7 +622,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 8d27c324abf..e18a224671f 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -133,8 +133,7 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563",
+ I2C_BOARD_INFO("pcf8563", 0x51),
}
};
#endif
@@ -203,7 +202,8 @@ static struct pad_desc pcm043_pads[] = {
MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
- MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+ /* gpio */
+ MX35_PAD_ATA_CS0__GPIO2_6,
};
/*
@@ -245,7 +245,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx35_init_irq,
.init_machine = mxc_board_init,
.timer = &pcm043_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 82b31c4ab11..044511f1b9a 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -81,13 +81,12 @@ static inline void mxc_init_imx_uart(void)
}
static struct resource dnet_resources[] = {
- [0] = {
+ {
.name = "dnet-memory",
.start = QONG_DNET_BASEADDR,
.end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = QONG_FPGA_IRQ,
.end = QONG_FPGA_IRQ,
.flags = IORESOURCE_IRQ,
@@ -280,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &qong_timer,
MACHINE_END
diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig
new file mode 100644
index 00000000000..8e5fa38ebb6
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Kconfig
@@ -0,0 +1,11 @@
+if ARCH_MXC91231
+
+comment "MXC91231 platforms:"
+
+config MACH_MAGX_ZN5
+ bool "Support Motorola Zn5 GSM phone"
+ default n
+ help
+ Include support for Motorola Zn5 GSM phone.
+
+endif
diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
new file mode 100644
index 00000000000..011d5e19712
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile
@@ -0,0 +1,2 @@
+obj-y := mm.o clock.o devices.o system.o iomux.o
+obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot
new file mode 100644
index 00000000000..9939a19d99a
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x90008000
+params_phys-y := 0x90000100
+initrd_phys-y := 0x90800000
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
new file mode 100644
index 00000000000..ecfa37fef8a
--- /dev/null
+++ b/arch/arm/mach-mxc91231/clock.c
@@ -0,0 +1,642 @@
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include <asm/clkdev.h>
+#include <asm/bug.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+#define CRM_SMALL_DIVIDER(base, name) \
+ crm_small_divider(base, \
+ base ## _ ## name ## _OFFSET, \
+ base ## _ ## name ## _MASK)
+#define CRM_1DIVIDER(base, name) \
+ crm_divider(base, \
+ base ## _ ## name ## _OFFSET, \
+ base ## _ ## name ## _MASK, 1)
+#define CRM_16DIVIDER(base, name) \
+ crm_divider(base, \
+ base ## _ ## name ## _OFFSET, \
+ base ## _ ## name ## _MASK, 16)
+
+static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask)
+{
+ static const u32 crm_small_dividers[] = {
+ 2, 3, 4, 5, 6, 8, 10, 12
+ };
+ u8 idx;
+
+ idx = (__raw_readl(reg) & mask) >> offset;
+ if (idx > 7)
+ return 1;
+
+ return crm_small_dividers[idx];
+}
+
+static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z)
+{
+ u32 div;
+ div = (__raw_readl(reg) & mask) >> offset;
+ return div ? div : z;
+}
+
+static int _clk_1bit_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 1 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_1bit_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(1 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_3bit_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 0x7 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_3bit_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(0x7 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+ return ckih_rate;
+}
+
+static struct clk ckih_clk = {
+ .get_rate = clk_ckih_get_rate,
+};
+
+static unsigned long clk_ckih_x2_get_rate(struct clk *clk)
+{
+ return 2 * clk_get_rate(clk->parent);
+}
+
+static struct clk ckih_x2_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_ckih_x2_get_rate,
+};
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+ return CKIL_CLK_FREQ;
+}
+
+static struct clk ckil_clk = {
+ .get_rate = clk_ckil_get_rate,
+};
+
+/* plls stuff */
+static struct clk mcu_pll_clk;
+static struct clk dsp_pll_clk;
+static struct clk usb_pll_clk;
+
+static struct clk *pll_clk(u8 sel)
+{
+ switch (sel) {
+ case 0:
+ return &mcu_pll_clk;
+ case 1:
+ return &dsp_pll_clk;
+ case 2:
+ return &usb_pll_clk;
+ }
+ BUG();
+}
+
+static void __iomem *pll_base(struct clk *clk)
+{
+ if (clk == &mcu_pll_clk)
+ return MXC_PLL0_BASE;
+ else if (clk == &dsp_pll_clk)
+ return MXC_PLL1_BASE;
+ else if (clk == &usb_pll_clk)
+ return MXC_PLL2_BASE;
+ BUG();
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+ const void __iomem *pllbase;
+ unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi;
+ long mfn, mfn_abs, mfd, pdf;
+ s64 temp;
+ pllbase = pll_base(clk);
+
+ pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM;
+ if (pll_hfsm == 0) {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+ } else {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+
+ pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+ mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK;
+ mfi = (mfi <= 5) ? 5 : mfi;
+ mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+ mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
+ mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000);
+
+ if (mfn < 0)
+ mfn_abs = -mfn;
+ else
+ mfn_abs = mfn;
+
+/* XXX: actually this asumes that ckih is fed to pll, but spec says
+ * that ckih_x2 is also possible. need to check this out.
+ */
+ ref_clk = clk_get_rate(&ckih_clk);
+
+ ref_clk *= 2;
+ ref_clk /= pdf + 1;
+
+ temp = (u64) ref_clk * mfn_abs;
+ do_div(temp, mfd);
+ if (mfn < 0)
+ temp = -temp;
+ temp += ref_clk * mfi;
+
+ return temp;
+}
+
+static int clk_pll_enable(struct clk *clk)
+{
+ void __iomem *ctl;
+ u32 reg;
+
+ ctl = pll_base(clk);
+ reg = __raw_readl(ctl);
+ reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+ __raw_writel(reg, ctl);
+ do {
+ reg = __raw_readl(ctl);
+ } while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF);
+ return 0;
+}
+
+static void clk_pll_disable(struct clk *clk)
+{
+ void __iomem *ctl;
+ u32 reg;
+
+ ctl = pll_base(clk);
+ reg = __raw_readl(ctl);
+ reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+ __raw_writel(reg, ctl);
+}
+
+static struct clk mcu_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_pll_get_rate,
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+};
+
+static struct clk dsp_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_pll_get_rate,
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_pll_get_rate,
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+};
+/* plls stuff end */
+
+/* ap_ref_clk stuff */
+static struct clk ap_ref_clk;
+
+static unsigned long clk_ap_ref_get_rate(struct clk *clk)
+{
+ u32 ascsr, acsr;
+ u8 ap_pat_ref_div_2, ap_isel, acs, ads;
+
+ ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+ acsr = __raw_readl(MXC_CRMAP_ACSR);
+
+ /* 0 for ckih, 1 for ckih*2 */
+ ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL;
+ /* reg divider */
+ ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1;
+ /* undocumented, 1 for disabling divider */
+ ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1;
+ /* 0 for pat_ref, 1 for divider out */
+ acs = acsr & MXC_CRMAP_ACSR_ACS;
+
+ if (acs & !ads)
+ /* use divided clock */
+ return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1);
+
+ return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1);
+}
+
+static struct clk ap_ref_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_ap_ref_get_rate,
+};
+/* ap_ref_clk stuff end */
+
+/* ap_pre_dfs_clk stuff */
+static struct clk ap_pre_dfs_clk;
+
+static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk)
+{
+ u32 acsr, ascsr;
+
+ acsr = __raw_readl(MXC_CRMAP_ACSR);
+ ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+ if (acsr & MXC_CRMAP_ACSR_ACS) {
+ u8 sel;
+ sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >>
+ MXC_CRMAP_ASCSR_APSEL_OFFSET;
+ return clk_get_rate(pll_clk(sel)) /
+ CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV);
+ }
+ return clk_get_rate(&ap_ref_clk);
+}
+
+static struct clk ap_pre_dfs_clk = {
+ .get_rate = clk_ap_pre_dfs_get_rate,
+};
+/* ap_pre_dfs_clk stuff end */
+
+/* usb_clk stuff */
+static struct clk usb_clk;
+
+static struct clk *clk_usb_parent(struct clk *clk)
+{
+ u32 acsr, ascsr;
+
+ acsr = __raw_readl(MXC_CRMAP_ACSR);
+ ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+ if (acsr & MXC_CRMAP_ACSR_ACS) {
+ u8 sel;
+ sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >>
+ MXC_CRMAP_ASCSR_USBSEL_OFFSET;
+ return pll_clk(sel);
+ }
+ return &ap_ref_clk;
+}
+
+static unsigned long clk_usb_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) /
+ CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV);
+}
+
+static struct clk usb_clk = {
+ .enable_reg = MXC_CRMAP_ACDER2,
+ .enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET,
+ .get_rate = clk_usb_get_rate,
+ .enable = _clk_1bit_enable,
+ .disable = _clk_1bit_disable,
+};
+/* usb_clk stuff end */
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV);
+}
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) /
+ CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV);
+}
+
+static struct clk ipg_clk = {
+ .parent = &ap_pre_dfs_clk,
+ .get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ahb_clk = {
+ .parent = &ap_pre_dfs_clk,
+ .get_rate = clk_ahb_get_rate,
+};
+
+/* perclk_clk stuff */
+static struct clk perclk_clk;
+
+static unsigned long clk_perclk_get_rate(struct clk *clk)
+{
+ u32 acder2;
+
+ acder2 = __raw_readl(MXC_CRMAP_ACDER2);
+ if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK)
+ return 2 * clk_get_rate(clk->parent);
+
+ return clk_get_rate(clk->parent);
+}
+
+static struct clk perclk_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_perclk_get_rate,
+};
+/* perclk_clk stuff end */
+
+/* uart_clk stuff */
+static struct clk uart_clk[];
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+ u32 div;
+
+ switch (clk->id) {
+ case 0:
+ case 1:
+ div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV);
+ break;
+ case 2:
+ div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV);
+ break;
+ default:
+ BUG();
+ }
+ return clk_get_rate(clk->parent) / div;
+}
+
+static struct clk uart_clk[] = {
+ {
+ .id = 0,
+ .parent = &perclk_clk,
+ .enable_reg = MXC_CRMAP_APRA,
+ .enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET,
+ .get_rate = clk_uart_get_rate,
+ .enable = _clk_1bit_enable,
+ .disable = _clk_1bit_disable,
+ }, {
+ .id = 1,
+ .parent = &perclk_clk,
+ .enable_reg = MXC_CRMAP_APRA,
+ .enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET,
+ .get_rate = clk_uart_get_rate,
+ .enable = _clk_1bit_enable,
+ .disable = _clk_1bit_disable,
+ }, {
+ .id = 2,
+ .parent = &perclk_clk,
+ .enable_reg = MXC_CRMAP_APRA,
+ .enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET,
+ .get_rate = clk_uart_get_rate,
+ .enable = _clk_1bit_enable,
+ .disable = _clk_1bit_disable,
+ },
+};
+/* uart_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk nfc_clk;
+
+static unsigned long clk_nfc_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) /
+ CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV);
+}
+
+static struct clk nfc_clk = {
+ .parent = &ahb_clk,
+ .enable_reg = MXC_CRMAP_ACDER2,
+ .enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET,
+ .get_rate = clk_nfc_get_rate,
+ .enable = _clk_1bit_enable,
+ .disable = _clk_1bit_disable,
+};
+/* sdhc_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk sdhc_clk[];
+
+static struct clk *clk_sdhc_parent(struct clk *clk)
+{
+ u32 aprb;
+ u8 sel;
+ u32 mask;
+ int offset;
+
+ aprb = __raw_readl(MXC_CRMAP_APRB);
+
+ switch (clk->id) {
+ case 0:
+ mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK;
+ offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET;
+ break;
+ case 1:
+ mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK;
+ offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET;
+ break;
+ default:
+ BUG();
+ }
+ sel = (aprb & mask) >> offset;
+
+ switch (sel) {
+ case 0:
+ return &ckih_clk;
+ case 1:
+ return &ckih_x2_clk;
+ }
+ return &usb_clk;
+}
+
+static unsigned long clk_sdhc_get_rate(struct clk *clk)
+{
+ u32 div;
+
+ switch (clk->id) {
+ case 0:
+ div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV);
+ break;
+ case 1:
+ div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV);
+ break;
+ default:
+ BUG();
+ }
+
+ return clk_get_rate(clk->parent) / div;
+}
+
+static int clk_sdhc_enable(struct clk *clk)
+{
+ u32 amlpmre1, aprb;
+
+ amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+ aprb = __raw_readl(MXC_CRMAP_APRB);
+ switch (clk->id) {
+ case 0:
+ amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+ aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+ break;
+ case 1:
+ amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+ aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+ break;
+ }
+ __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+ __raw_writel(aprb, MXC_CRMAP_APRB);
+ return 0;
+}
+
+static void clk_sdhc_disable(struct clk *clk)
+{
+ u32 amlpmre1, aprb;
+
+ amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+ aprb = __raw_readl(MXC_CRMAP_APRB);
+ switch (clk->id) {
+ case 0:
+ amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+ aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+ break;
+ case 1:
+ amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+ aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+ break;
+ }
+ __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+ __raw_writel(aprb, MXC_CRMAP_APRB);
+}
+
+static struct clk sdhc_clk[] = {
+ {
+ .id = 0,
+ .get_rate = clk_sdhc_get_rate,
+ .enable = clk_sdhc_enable,
+ .disable = clk_sdhc_disable,
+ }, {
+ .id = 1,
+ .get_rate = clk_sdhc_get_rate,
+ .enable = clk_sdhc_enable,
+ .disable = clk_sdhc_disable,
+ },
+};
+/* sdhc_clk stuff end */
+
+/* wdog_clk stuff */
+static struct clk wdog_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable_reg = MXC_CRMAP_AMLPMRD,
+ .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET,
+ .enable = _clk_3bit_enable,
+ .disable = _clk_3bit_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable_reg = MXC_CRMAP_AMLPMRD,
+ .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET,
+ .enable = _clk_3bit_enable,
+ .disable = _clk_3bit_disable,
+ },
+};
+/* wdog_clk stuff end */
+
+/* gpt_clk stuff */
+static struct clk gpt_clk = {
+ .parent = &ipg_clk,
+ .enable_reg = MXC_CRMAP_AMLPMRC,
+ .enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET,
+ .enable = _clk_3bit_enable,
+ .disable = _clk_3bit_disable,
+};
+/* gpt_clk stuff end */
+
+/* cspi_clk stuff */
+static struct clk cspi_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable_reg = MXC_CRMAP_AMLPMRE2,
+ .enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET,
+ .enable = _clk_3bit_enable,
+ .disable = _clk_3bit_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable_reg = MXC_CRMAP_AMLPMRE1,
+ .enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET,
+ .enable = _clk_3bit_enable,
+ .disable = _clk_3bit_disable,
+ },
+};
+/* cspi_clk stuff end */
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+ _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0])
+ _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1])
+ _REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0])
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0])
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1])
+};
+
+int __init mxc91231_clocks_init(unsigned long fref)
+{
+ void __iomem *gpt_base;
+ int i;
+
+ ckih_rate = fref;
+
+ usb_clk.parent = clk_usb_parent(&usb_clk);
+ sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
+ sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
+ mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
+
+ return 0;
+}
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
new file mode 100644
index 00000000000..ce4f5905818
--- /dev/null
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -0,0 +1,399 @@
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ * Copyright 2006-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+
+#define CKIL_CLK_FREQ 32768
+
+#define MXC_CRM_AP_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR)
+#define MXC_CRM_COM_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR)
+#define MXC_DSM_BASE MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR)
+#define MXC_PLL0_BASE MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR)
+#define MXC_PLL1_BASE MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR)
+#define MXC_PLL2_BASE MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR)
+#define MXC_CLKCTL_BASE MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL 0x00
+#define MXC_PLL_DP_CONFIG 0x04
+#define MXC_PLL_DP_OP 0x08
+#define MXC_PLL_DP_MFD 0x0C
+#define MXC_PLL_DP_MFN 0x10
+#define MXC_PLL_DP_HFS_OP 0x1C
+#define MXC_PLL_DP_HFS_MFD 0x20
+#define MXC_PLL_DP_HFS_MFN 0x24
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
+#define MXC_PLL_DP_CTL_ADE 0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
+#define MXC_PLL_DP_CTL_HFSM 0x80
+#define MXC_PLL_DP_CTL_PRE 0x40
+#define MXC_PLL_DP_CTL_UPEN 0x20
+#define MXC_PLL_DP_CTL_RST 0x10
+#define MXC_PLL_DP_CTL_RCP 0x8
+#define MXC_PLL_DP_CTL_PLM 0x4
+#define MXC_PLL_DP_CTL_BRM0 0x2
+#define MXC_PLL_DP_CTL_LRF 0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET 4
+#define MXC_PLL_DP_OP_MFI_MASK 0xF
+#define MXC_PLL_DP_OP_PDF_OFFSET 0
+#define MXC_PLL_DP_OP_PDF_MASK 0xF
+
+#define MXC_PLL_DP_MFD_OFFSET 0
+#define MXC_PLL_DP_MFD_MASK 0x7FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET 0
+#define MXC_PLL_DP_MFN_MASK 0x7FFFFFF
+
+/* CRM AP Register Offsets */
+#define MXC_CRMAP_ASCSR (MXC_CRM_AP_BASE + 0x00)
+#define MXC_CRMAP_ACDR (MXC_CRM_AP_BASE + 0x04)
+#define MXC_CRMAP_ACDER1 (MXC_CRM_AP_BASE + 0x08)
+#define MXC_CRMAP_ACDER2 (MXC_CRM_AP_BASE + 0x0C)
+#define MXC_CRMAP_ACGCR (MXC_CRM_AP_BASE + 0x10)
+#define MXC_CRMAP_ACCGCR (MXC_CRM_AP_BASE + 0x14)
+#define MXC_CRMAP_AMLPMRA (MXC_CRM_AP_BASE + 0x18)
+#define MXC_CRMAP_AMLPMRB (MXC_CRM_AP_BASE + 0x1C)
+#define MXC_CRMAP_AMLPMRC (MXC_CRM_AP_BASE + 0x20)
+#define MXC_CRMAP_AMLPMRD (MXC_CRM_AP_BASE + 0x24)
+#define MXC_CRMAP_AMLPMRE1 (MXC_CRM_AP_BASE + 0x28)
+#define MXC_CRMAP_AMLPMRE2 (MXC_CRM_AP_BASE + 0x2C)
+#define MXC_CRMAP_AMLPMRF (MXC_CRM_AP_BASE + 0x30)
+#define MXC_CRMAP_AMLPMRG (MXC_CRM_AP_BASE + 0x34)
+#define MXC_CRMAP_APGCR (MXC_CRM_AP_BASE + 0x38)
+#define MXC_CRMAP_ACSR (MXC_CRM_AP_BASE + 0x3C)
+#define MXC_CRMAP_ADCR (MXC_CRM_AP_BASE + 0x40)
+#define MXC_CRMAP_ACR (MXC_CRM_AP_BASE + 0x44)
+#define MXC_CRMAP_AMCR (MXC_CRM_AP_BASE + 0x48)
+#define MXC_CRMAP_APCR (MXC_CRM_AP_BASE + 0x4C)
+#define MXC_CRMAP_AMORA (MXC_CRM_AP_BASE + 0x50)
+#define MXC_CRMAP_AMORB (MXC_CRM_AP_BASE + 0x54)
+#define MXC_CRMAP_AGPR (MXC_CRM_AP_BASE + 0x58)
+#define MXC_CRMAP_APRA (MXC_CRM_AP_BASE + 0x5C)
+#define MXC_CRMAP_APRB (MXC_CRM_AP_BASE + 0x60)
+#define MXC_CRMAP_APOR (MXC_CRM_AP_BASE + 0x64)
+#define MXC_CRMAP_ADFMR (MXC_CRM_AP_BASE + 0x68)
+
+/* CRM AP Register Bit definitions */
+#define MXC_CRMAP_ASCSR_CRS 0x10000
+#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET 15
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2 0x8000
+#define MXC_CRMAP_ASCSR_USBSEL_OFFSET 13
+#define MXC_CRMAP_ASCSR_USBSEL_MASK (0x3 << 13)
+#define MXC_CRMAP_ASCSR_CSISEL_OFFSET 11
+#define MXC_CRMAP_ASCSR_CSISEL_MASK (0x3 << 11)
+#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET 7
+#define MXC_CRMAP_ASCSR_SSI2SEL_MASK (0x3 << 7)
+#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET 5
+#define MXC_CRMAP_ASCSR_SSI1SEL_MASK (0x3 << 5)
+#define MXC_CRMAP_ASCSR_APSEL_OFFSET 3
+#define MXC_CRMAP_ASCSR_APSEL_MASK (0x3 << 3)
+#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET 2
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1 0x4
+#define MXC_CRMAP_ASCSR_APISEL 0x1
+
+#define MXC_CRMAP_ACDR_ARMDIV_OFFSET 8
+#define MXC_CRMAP_ACDR_ARMDIV_MASK (0xF << 8)
+#define MXC_CRMAP_ACDR_AHBDIV_OFFSET 4
+#define MXC_CRMAP_ACDR_AHBDIV_MASK (0xF << 4)
+#define MXC_CRMAP_ACDR_IPDIV_OFFSET 0
+#define MXC_CRMAP_ACDR_IPDIV_MASK 0xF
+
+#define MXC_CRMAP_ACDER1_CSIEN_OFFSET 30
+#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET 24
+#define MXC_CRMAP_ACDER1_CSIDIV_MASK (0x3F << 24)
+#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET 14
+#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET 8
+#define MXC_CRMAP_ACDER1_SSI2DIV_MASK (0x3F << 8)
+#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET 6
+#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET 0
+#define MXC_CRMAP_ACDER1_SSI1DIV_MASK 0x3F
+
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET 24
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK (0x7 << 24)
+#define MXC_CRMAP_ACDER2_NFCEN_OFFSET 20
+#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET 16
+#define MXC_CRMAP_ACDER2_NFCDIV_MASK (0xF << 16)
+#define MXC_CRMAP_ACDER2_USBEN_OFFSET 12
+#define MXC_CRMAP_ACDER2_USBDIV_OFFSET 8
+#define MXC_CRMAP_ACDER2_USBDIV_MASK (0xF << 8)
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET 5
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK (0x3 << 5)
+#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET 0
+#define MXC_CRMAP_ACDER2_BAUDDIV_MASK 0xF
+
+#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET 22
+#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK (0x7 << 22)
+#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET 19
+#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK (0x7 << 19)
+#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET 12
+#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK (0x7 << 12)
+#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET 9
+#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET 6
+#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET 3
+#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK (0x7 << 3)
+
+#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET 0
+#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK 0x7
+
+#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET 28
+#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK (0x7 << 28)
+#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET 22
+#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK (0x7 << 22)
+#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET 16
+#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK (0x7 << 16)
+#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET 12
+#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK (0x7 << 12)
+#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET 9
+#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET 6
+#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET 3
+#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK (0x7 << 3)
+#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET 0
+#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK 0x7
+
+#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET 22
+#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK (0x7 << 22)
+#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET 12
+#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK (0x7 << 12)
+#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET 9
+#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET 6
+#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET 0
+#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK 0x7
+
+#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET 28
+#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK (0x7 << 28)
+#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET 25
+#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK (0x7 << 25)
+#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET 22
+#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK (0x7 << 22)
+#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET 19
+#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK (0x7 << 19)
+#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET 16
+#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK (0x7 << 16)
+#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET 12
+#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK (0x7 << 12)
+#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET 9
+#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET 6
+#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET 3
+#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK (0x7 << 3)
+#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET 0
+#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK 0x7
+
+#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET 0
+#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK 0x7
+
+#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET 19
+#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK (0x7 << 19)
+#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET 16
+#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK (0x7 << 16)
+#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET 9
+#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET 6
+#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET 3
+#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK (0x7 << 3)
+#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET 0
+#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK (0x7 << 0)
+
+#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET 28
+#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK (0x7 << 28)
+#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET 22
+#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK (0x7 << 22)
+#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET 19
+#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK (0x7 << 19)
+#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET 16
+#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK (0x7 << 16)
+#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET 12
+#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK (0x7 << 12)
+#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET 9
+#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET 6
+#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET 3
+#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK (0x7 << 3)
+#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET 0
+#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK 0x7
+
+#define MXC_CRMAP_AGPR_IPUPAD_OFFSET 20
+#define MXC_CRMAP_AGPR_IPUPAD_MASK (0x7 << 20)
+
+#define MXC_CRMAP_APRA_EL1TEN_OFFSET 29
+#define MXC_CRMAP_APRA_SIMEN_OFFSET 24
+#define MXC_CRMAP_APRA_UART3DIV_OFFSET 17
+#define MXC_CRMAP_APRA_UART3DIV_MASK (0xF << 17)
+#define MXC_CRMAP_APRA_UART3EN_OFFSET 16
+#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET 14
+#define MXC_CRMAP_APRA_MQSPIEN_OFFSET 13
+#define MXC_CRMAP_APRA_UART2EN_OFFSET 8
+#define MXC_CRMAP_APRA_UART1EN_OFFSET 0
+
+#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET 13
+#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK (0x7 << 13)
+#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET 9
+#define MXC_CRMAP_APRB_SDHC2_DIV_MASK (0xF << 9)
+#define MXC_CRMAP_APRB_SDHC2EN_OFFSET 8
+#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET 5
+#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK (0x7 << 5)
+#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET 1
+#define MXC_CRMAP_APRB_SDHC1_DIV_MASK (0xF << 1)
+#define MXC_CRMAP_APRB_SDHC1EN_OFFSET 0
+
+#define MXC_CRMAP_ACSR_ADS_OFFSET 8
+#define MXC_CRMAP_ACSR_ADS (0x1 << 8)
+#define MXC_CRMAP_ACSR_ACS 0x1
+
+#define MXC_CRMAP_ADCR_LFDF_0 (0x0 << 8)
+#define MXC_CRMAP_ADCR_LFDF_2 (0x1 << 8)
+#define MXC_CRMAP_ADCR_LFDF_4 (0x2 << 8)
+#define MXC_CRMAP_ADCR_LFDF_8 (0x3 << 8)
+#define MXC_CRMAP_ADCR_LFDF_OFFSET 8
+#define MXC_CRMAP_ADCR_LFDF_MASK (0x3 << 8)
+#define MXC_CRMAP_ADCR_ALT_PLL 0x80
+#define MXC_CRMAP_ADCR_DFS_DIVEN 0x20
+#define MXC_CRMAP_ADCR_DIV_BYP 0x2
+#define MXC_CRMAP_ADCR_VSTAT 0x8
+#define MXC_CRMAP_ADCR_TSTAT 0x10
+#define MXC_CRMAP_ADCR_DVFS_VCTRL 0x10
+#define MXC_CRMAP_ADCR_CLK_ON 0x40
+
+#define MXC_CRMAP_ADFMR_FC_OFFSET 16
+#define MXC_CRMAP_ADFMR_FC_MASK (0x1F << 16)
+#define MXC_CRMAP_ADFMR_MF_OFFSET 1
+#define MXC_CRMAP_ADFMR_MF_MASK (0x3FF << 1)
+#define MXC_CRMAP_ADFMR_DFM_CLK_READY 0x1
+#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN 0x8000
+
+#define MXC_CRMAP_ACR_CKOHS_HIGH (1 << 18)
+#define MXC_CRMAP_ACR_CKOS_HIGH (1 << 16)
+#define MXC_CRMAP_ACR_CKOHS_MASK (0x7 << 12)
+#define MXC_CRMAP_ACR_CKOHD (1 << 11)
+#define MXC_CRMAP_ACR_CKOHDIV_MASK (0xF << 8)
+#define MXC_CRMAP_ACR_CKOHDIV_OFFSET 8
+#define MXC_CRMAP_ACR_CKOD (1 << 7)
+#define MXC_CRMAP_ACR_CKOS_MASK (0x7 << 4)
+
+/* AP Warm reset */
+#define MXC_CRMAP_AMCR_SW_AP (1 << 14)
+
+/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */
+#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT 0x00000001
+#define MXC_CRMAP_ACGCR_ACG0_STOP 0x00000003
+#define MXC_CRMAP_ACGCR_ACG0_RUN 0x00000007
+#define MXC_CRMAP_ACGCR_ACG0_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT 0x00000008
+#define MXC_CRMAP_ACGCR_ACG1_STOP 0x00000018
+#define MXC_CRMAP_ACGCR_ACG1_RUN 0x00000038
+#define MXC_CRMAP_ACGCR_ACG1_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT 0x00000040
+#define MXC_CRMAP_ACGCR_ACG2_STOP 0x000000C0
+#define MXC_CRMAP_ACGCR_ACG2_RUN 0x000001C0
+#define MXC_CRMAP_ACGCR_ACG2_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT 0x00000200
+#define MXC_CRMAP_ACGCR_ACG3_STOP 0x00000600
+#define MXC_CRMAP_ACGCR_ACG3_RUN 0x00000E00
+#define MXC_CRMAP_ACGCR_ACG3_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT 0x00001000
+#define MXC_CRMAP_ACGCR_ACG4_STOP 0x00003000
+#define MXC_CRMAP_ACGCR_ACG4_RUN 0x00007000
+#define MXC_CRMAP_ACGCR_ACG4_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT 0x00010000
+#define MXC_CRMAP_ACGCR_ACG5_STOP 0x00030000
+#define MXC_CRMAP_ACGCR_ACG5_RUN 0x00070000
+#define MXC_CRMAP_ACGCR_ACG5_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT 0x00080000
+#define MXC_CRMAP_ACGCR_ACG6_STOP 0x00180000
+#define MXC_CRMAP_ACGCR_ACG6_RUN 0x00380000
+#define MXC_CRMAP_ACGCR_ACG6_DISABLED 0x00000000
+
+#define NUM_GATE_CTRL 6
+
+/* CRM COM Register Offsets */
+#define MXC_CRMCOM_CSCR (MXC_CRM_COM_BASE + 0x0C)
+#define MXC_CRMCOM_CCCR (MXC_CRM_COM_BASE + 0x10)
+
+/* CRM COM Bit Definitions */
+#define MXC_CRMCOM_CSCR_PPD1 0x08000000
+#define MXC_CRMCOM_CSCR_CKOHSEL (1 << 18)
+#define MXC_CRMCOM_CSCR_CKOSEL (1 << 17)
+#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET 8
+#define MXC_CRMCOM_CCCR_CC_DIV_MASK (0x1F << 8)
+#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET 0
+#define MXC_CRMCOM_CCCR_CC_SEL_MASK 0x3
+
+/* DSM Register Offsets */
+#define MXC_DSM_SLEEP_TIME (MXC_DSM_BASE + 0x0c)
+#define MXC_DSM_CONTROL0 (MXC_DSM_BASE + 0x20)
+#define MXC_DSM_CONTROL1 (MXC_DSM_BASE + 0x24)
+#define MXC_DSM_CTREN (MXC_DSM_BASE + 0x28)
+#define MXC_DSM_WARM_PER (MXC_DSM_BASE + 0x40)
+#define MXC_DSM_LOCK_PER (MXC_DSM_BASE + 0x44)
+#define MXC_DSM_MGPER (MXC_DSM_BASE + 0x4c)
+#define MXC_DSM_CRM_CONTROL (MXC_DSM_BASE + 0x50)
+
+/* Bit definitions of various registers in DSM */
+#define MXC_DSM_CRM_CTRL_DVFS_BYP 0x00000008
+#define MXC_DSM_CRM_CTRL_DVFS_VCTRL 0x00000004
+#define MXC_DSM_CRM_CTRL_LPMD1 0x00000002
+#define MXC_DSM_CRM_CTRL_LPMD0 0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE 0x00000000
+#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE 0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE 0x00000003
+#define MXC_DSM_CONTROL0_STBY_COMMIT_EN 0x00000200
+#define MXC_DSM_CONTROL0_MSTR_EN 0x00000001
+#define MXC_DSM_CONTROL0_RESTART 0x00000010
+/* Counter Block reset */
+#define MXC_DSM_CONTROL1_CB_RST 0x00000002
+/* State Machine reset */
+#define MXC_DSM_CONTROL1_SM_RST 0x00000004
+/* Bit needed to reset counter block */
+#define MXC_CONTROL1_RST_CNT32 0x00000008
+#define MXC_DSM_CONTROL1_RST_CNT32_EN 0x00000800
+#define MXC_DSM_CONTROL1_SLEEP 0x00000100
+#define MXC_DSM_CONTROL1_WAKEUP_DISABLE 0x00004000
+#define MXC_DSM_CTREN_CNT32 0x00000001
+
+/* Magic Fix enable bit */
+#define MXC_DSM_MGPER_EN_MGFX 0x80000000
+#define MXC_DSM_MGPER_PER_MASK 0x000003FF
+#define MXC_DSM_MGPER_PER(n) (MXC_DSM_MGPER_PER_MASK & n)
+
+/* Address offsets of the CLKCTL registers */
+#define MXC_CLKCTL_GP_CTRL (MXC_CLKCTL_BASE + 0x00)
+#define MXC_CLKCTL_GP_SER (MXC_CLKCTL_BASE + 0x04)
+#define MXC_CLKCTL_GP_CER (MXC_CLKCTL_BASE + 0x08)
+
+#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
new file mode 100644
index 00000000000..353bd977b39
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+ {
+ .start = MXC91231_UART1_BASE_ADDR,
+ .end = MXC91231_UART1_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_UART1_RX,
+ .end = MXC91231_INT_UART1_RX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART1_TX,
+ .end = MXC91231_INT_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART1_MINT,
+ .end = MXC91231_INT_UART1_MINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device0 = {
+ .name = "imx-uart",
+ .id = 0,
+ .resource = uart0,
+ .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+ {
+ .start = MXC91231_UART2_BASE_ADDR,
+ .end = MXC91231_UART2_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_UART2_RX,
+ .end = MXC91231_INT_UART2_RX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART2_TX,
+ .end = MXC91231_INT_UART2_TX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART2_MINT,
+ .end = MXC91231_INT_UART2_MINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device1 = {
+ .name = "imx-uart",
+ .id = 1,
+ .resource = uart1,
+ .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+ {
+ .start = MXC91231_UART3_BASE_ADDR,
+ .end = MXC91231_UART3_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_UART3_RX,
+ .end = MXC91231_INT_UART3_RX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART3_TX,
+ .end = MXC91231_INT_UART3_TX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART3_MINT,
+ .end = MXC91231_INT_UART3_MINT,
+ .flags = IORESOURCE_IRQ,
+
+ },
+};
+
+struct platform_device mxc_uart_device2 = {
+ .name = "imx-uart",
+ .id = 2,
+ .resource = uart2,
+ .num_resources = ARRAY_SIZE(uart2),
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port mxc_gpio_ports[] = {
+ [0] = {
+ .chip.label = "gpio-0",
+ .base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
+ .irq = MXC91231_INT_GPIO1,
+ .virtual_irq_start = MXC_GPIO_IRQ_START,
+ },
+ [1] = {
+ .chip.label = "gpio-1",
+ .base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
+ .irq = MXC91231_INT_GPIO2,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+ },
+ [2] = {
+ .chip.label = "gpio-2",
+ .base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
+ .irq = MXC91231_INT_GPIO3,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+ },
+ [3] = {
+ .chip.label = "gpio-3",
+ .base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
+ .irq = MXC91231_INT_GPIO4,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+ },
+};
+
+int __init mxc_register_gpios(void)
+{
+ return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
+}
+
+static struct resource mxc_nand_resources[] = {
+ {
+ .start = MXC91231_NFC_BASE_ADDR,
+ .end = MXC91231_NFC_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM
+ }, {
+ .start = MXC91231_INT_NANDFC,
+ .end = MXC91231_INT_NANDFC,
+ .flags = IORESOURCE_IRQ
+ },
+};
+
+struct platform_device mxc_nand_device = {
+ .name = "mxc_nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_nand_resources),
+ .resource = mxc_nand_resources,
+};
+
+static struct resource mxc_sdhc0_resources[] = {
+ {
+ .start = MXC91231_MMC_SDHC1_BASE_ADDR,
+ .end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_MMC_SDHC1,
+ .end = MXC91231_INT_MMC_SDHC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource mxc_sdhc1_resources[] = {
+ {
+ .start = MXC91231_MMC_SDHC2_BASE_ADDR,
+ .end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_MMC_SDHC2,
+ .end = MXC91231_INT_MMC_SDHC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_sdhc_device0 = {
+ .name = "mxc-mmc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
+ .resource = mxc_sdhc0_resources,
+};
+
+struct platform_device mxc_sdhc_device1 = {
+ .name = "mxc-mmc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
+ .resource = mxc_sdhc1_resources,
+};
+
+static struct resource mxc_cspi0_resources[] = {
+ {
+ .start = MXC91231_CSPI1_BASE_ADDR,
+ .end = MXC91231_CSPI1_BASE_ADDR + 0x20,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_CSPI1,
+ .end = MXC91231_INT_CSPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_cspi_device0 = {
+ .name = "spi_imx",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_cspi0_resources),
+ .resource = mxc_cspi0_resources,
+};
+
+static struct resource mxc_cspi1_resources[] = {
+ {
+ .start = MXC91231_CSPI2_BASE_ADDR,
+ .end = MXC91231_CSPI2_BASE_ADDR + 0x20,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_CSPI2,
+ .end = MXC91231_INT_CSPI2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_cspi_device1 = {
+ .name = "spi_imx",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_cspi1_resources),
+ .resource = mxc_cspi1_resources,
+};
+
+static struct resource mxc_wdog0_resources[] = {
+ {
+ .start = MXC91231_WDOG1_BASE_ADDR,
+ .end = MXC91231_WDOG1_BASE_ADDR + 0x10,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mxc_wdog_device0 = {
+ .name = "mxc-wdt",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_wdog0_resources),
+ .resource = mxc_wdog0_resources,
+};
diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h
new file mode 100644
index 00000000000..72a2136ce27
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.h
@@ -0,0 +1,13 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+
+extern struct platform_device mxc_nand_device;
+
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
+
+extern struct platform_device mxc_cspi_device0;
+extern struct platform_device mxc_cspi_device1;
+
+extern struct platform_device mxc_wdog_device0;
diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c
new file mode 100644
index 00000000000..405d9b19d89
--- /dev/null
+++ b/arch/arm/mach-mxc91231/iomux.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mxc91231.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_AP_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
+#define IOMUX_COM_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
+#define IOMUXSW_AP_MUX_CTL (IOMUX_AP_BASE + 0x000)
+#define IOMUXSW_SP_MUX_CTL (IOMUX_COM_BASE + 0x000)
+#define IOMUXSW_PAD_CTL (IOMUX_COM_BASE + 0x200)
+
+#define IOMUXINT_OBS1 (IOMUX_AP_BASE + 0x600)
+#define IOMUXINT_OBS2 (IOMUX_AP_BASE + 0x004)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define NB_PORTS ((PIN_MAX + 32) / 32)
+#define PIN_GLOBAL_NUM(pin) \
+ (((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX + \
+ ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 + \
+ ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(const unsigned int pin_mode)
+{
+ u32 side, field, l, mode, ret = 0;
+ void __iomem *reg;
+
+ side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
+ switch (side) {
+ case MUX_SIDE_AP:
+ reg = IOMUXSW_AP_MUX_CTL;
+ break;
+ case MUX_SIDE_SP:
+ reg = IOMUXSW_SP_MUX_CTL;
+ break;
+ default:
+ return -EINVAL;
+ }
+ reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
+ field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
+ mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+
+ spin_lock(&gpio_mux_lock);
+
+ l = __raw_readl(reg);
+ l &= ~(0xff << (field * 8));
+ l |= mode << (field * 8);
+ __raw_writel(l, reg);
+
+ spin_unlock(&gpio_mux_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+ u32 padgrp, field, l;
+ void __iomem *reg;
+
+ padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
+ reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+ field = (pin + 2) % 3;
+
+ pr_debug("%s: reg offset = 0x%x, field = %d\n",
+ __func__, (pin + 2) / 3, field);
+
+ spin_lock(&gpio_mux_lock);
+
+ l = __raw_readl(reg);
+ l &= ~(0x1ff << (field * 10));
+ l |= config << (field * 10);
+ __raw_writel(l, reg);
+
+ spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label)
+{
+ unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+ if (pad >= (PIN_MAX + 1)) {
+ printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+ pad, label ? label : "?");
+ return -EINVAL;
+ }
+
+ if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+ printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+ pad, label ? label : "?");
+ return -EBUSY;
+ }
+ mxc_iomux_mode(pin_mode);
+
+ return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+ const char *label)
+{
+ unsigned int *p = pin_list;
+ int i;
+ int ret = -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ ret = mxc_iomux_alloc_pin(*p, label);
+ if (ret)
+ goto setup_error;
+ p++;
+ }
+ return 0;
+
+setup_error:
+ mxc_iomux_release_multiple_pins(pin_list, i);
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin_mode)
+{
+ unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+
+ if (pad < (PIN_MAX + 1))
+ clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+ unsigned int *p = pin_list;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ mxc_iomux_release_pin(*p);
+ p++;
+ }
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
new file mode 100644
index 00000000000..7dbe4ca12ef
--- /dev/null
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mxc91231.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+};
+
+static struct imxmmc_platform_data sdhc_pdata = {
+};
+
+static void __init zn5_init(void)
+{
+ pm_power_off = mxc91231_power_off;
+
+ mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
+ mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+
+ mxc_register_device(&mxc_wdog_device0, NULL);
+
+ return;
+}
+
+static void __init zn5_timer_init(void)
+{
+ mxc91231_clocks_init(26000000); /* 26mhz ckih */
+}
+
+struct sys_timer zn5_timer = {
+ .init = zn5_timer_init,
+};
+
+MACHINE_START(MAGX_ZN5, "Motorola Zn5")
+ .phys_io = MXC91231_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mxc91231_map_io,
+ .init_irq = mxc91231_init_irq,
+ .timer = &zn5_timer,
+ .init_machine = zn5_init,
+MACHINE_END
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
new file mode 100644
index 00000000000..6becda3ff33
--- /dev/null
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 1999,2000 Arm Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - add MXC specific definitions
+ * Copyright 2006 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/*
+ * This structure defines the MXC memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+ {
+ .virtual = MXC91231_L2CC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_L2CC_BASE_ADDR),
+ .length = MXC91231_L2CC_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_X_MEMC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_X_MEMC_BASE_ADDR),
+ .length = MXC91231_X_MEMC_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_ROMP_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_ROMP_BASE_ADDR),
+ .length = MXC91231_ROMP_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_AVIC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_AVIC_BASE_ADDR),
+ .length = MXC91231_AVIC_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_AIPS1_BASE_ADDR),
+ .length = MXC91231_AIPS1_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_SPBA0_BASE_ADDR),
+ .length = MXC91231_SPBA0_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_SPBA1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_SPBA1_BASE_ADDR),
+ .length = MXC91231_SPBA1_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_AIPS2_BASE_ADDR),
+ .length = MXC91231_AIPS2_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory map for
+ * the IO modules.
+ */
+void __init mxc91231_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MXC91231);
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mxc91231_init_irq(void)
+{
+ mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c
new file mode 100644
index 00000000000..736f7efd874
--- /dev/null
+++ b/arch/arm/mach-mxc91231/system.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/proc-fns.h>
+#include <mach/hardware.h>
+
+#include "crm_regs.h"
+
+#define WDOG_WCR MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
+#define WDOG_WCR_OUT_ENABLE (1 << 6)
+#define WDOG_WCR_ASSERT (1 << 5)
+
+void mxc91231_power_off(void)
+{
+ u16 wcr;
+
+ wcr = __raw_readw(WDOG_WCR);
+ wcr |= WDOG_WCR_OUT_ENABLE;
+ wcr &= ~WDOG_WCR_ASSERT;
+ __raw_writew(wcr, WDOG_WCR);
+}
+
+void mxc91231_arch_reset(char mode, const char *cmd)
+{
+ u32 amcr;
+
+ /* Reset the AP using CRM */
+ amcr = __raw_readl(MXC_CRMAP_AMCR);
+ amcr &= ~MXC_CRMAP_AMCR_SW_AP;
+ __raw_writel(amcr, MXC_CRMAP_AMCR);
+
+ mdelay(10);
+ cpu_reset(0);
+}
+
+void mxc91231_prepare_idle(void)
+{
+ u32 crm_ctl;
+
+ /* Go to WAIT mode after WFI */
+ crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
+ crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
+ crm_ctl |= MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
+ __raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
+}
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index a1952a0feda..844f1f9acbd 100644
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -24,15 +24,13 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ ldr \base, =io_p2v(0x001ff000)
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov \base, #io_p2v(0x00100000)
- add \base, \base, #0x000ff000
-
ldr \irqstat, [\base, #0]
clz \irqnr, \irqstat
rsb \irqnr, \irqnr, #31
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
new file mode 100644
index 00000000000..2a02b49c40f
--- /dev/null
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -0,0 +1,21 @@
+if ARCH_NOMADIK
+
+menu "Nomadik boards"
+
+config MACH_NOMADIK_8815NHK
+ bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
+ select NOMADIK_8815
+
+endmenu
+
+config NOMADIK_8815
+ bool
+
+
+config I2C_BITBANG_8815NHK
+ tristate "Driver for bit-bang busses found on the 8815 NHK"
+ depends on I2C && MACH_NOMADIK_8815NHK
+ select I2C_ALGOBIT
+ default y
+
+endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
new file mode 100644
index 00000000000..412040982a4
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for the linux kernel.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+
+# Object file lists.
+
+obj-y += clock.o timer.o gpio.o
+
+# Cpu revision
+obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
+
+# Specific board support
+obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
+
+# Nomadik extra devices
+obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot
new file mode 100644
index 00000000000..c7e75acfe6c
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile.boot
@@ -0,0 +1,4 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
+
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
new file mode 100644
index 00000000000..79bdea943eb
--- /dev/null
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -0,0 +1,111 @@
+/*
+ * linux/arch/arm/mach-nomadik/board-8815nhk.c
+ *
+ * Copyright (C) STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * NHK15 board specifc driver definition
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/setup.h>
+#include "clock.h"
+
+#define __MEM_4K_RESOURCE(x) \
+ .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device uart0_device = {
+ .dev = { .init_name = "uart0" },
+ __MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
+ .irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+ .dev = { .init_name = "uart1" },
+ __MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
+ .irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &uart0_device,
+ &uart1_device,
+};
+
+/* We have a fixed clock alone, by now */
+static struct clk nhk8815_clk_48 = {
+ .rate = 48*1000*1000,
+};
+
+static struct resource nhk8815_eth_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x34000000 + 0x300,
+ .end = 0x34000000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = NOMADIK_GPIO_TO_IRQ(115),
+ .end = NOMADIK_GPIO_TO_IRQ(115),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+ }
+};
+
+static struct platform_device nhk8815_eth_device = {
+ .name = "smc91x",
+ .resource = nhk8815_eth_resources,
+ .num_resources = ARRAY_SIZE(nhk8815_eth_resources),
+};
+
+static int __init nhk8815_eth_init(void)
+{
+ int gpio_nr = 115; /* hardwired in the board */
+ int err;
+
+ err = gpio_request(gpio_nr, "eth_irq");
+ if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
+ if (!err) err = gpio_direction_input(gpio_nr);
+ if (err)
+ pr_err("Error %i in %s\n", err, __func__);
+ return err;
+}
+device_initcall(nhk8815_eth_init);
+
+static struct platform_device *nhk8815_platform_devices[] __initdata = {
+ &nhk8815_eth_device,
+ /* will add more devices */
+};
+
+static void __init nhk8815_platform_init(void)
+{
+ int i;
+
+ cpu8815_platform_init();
+ platform_add_devices(nhk8815_platform_devices,
+ ARRAY_SIZE(nhk8815_platform_devices));
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name);
+ amba_device_register(amba_devs[i], &iomem_resource);
+ }
+}
+
+MACHINE_START(NOMADIK, "NHK8815")
+ /* Maintainer: ST MicroElectronics */
+ .phys_io = NOMADIK_UART0_BASE,
+ .io_pg_offst = (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x100,
+ .map_io = cpu8815_map_io,
+ .init_irq = cpu8815_init_irq,
+ .timer = &nomadik_timer,
+ .init_machine = nhk8815_platform_init,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
new file mode 100644
index 00000000000..9f92502a008
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/arm/mach-nomadik/clock.c
+ *
+ * Copyright (C) 2009 Alessandro Rubini
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <asm/clkdev.h>
+#include "clock.h"
+
+/*
+ * The nomadik board uses generic clocks, but the serial pl011 file
+ * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* enable and disable do nothing */
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Create a clock structure with the given name */
+int nmdk_clk_create(struct clk *clk, const char *dev_id)
+{
+ struct clk_lookup *clkdev;
+
+ clkdev = clkdev_alloc(clk, NULL, dev_id);
+ if (!clkdev)
+ return -ENOMEM;
+ clkdev_add(clkdev);
+ return 0;
+}
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
new file mode 100644
index 00000000000..235faec7f62
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.h
@@ -0,0 +1,14 @@
+
+/*
+ * linux/arch/arm/mach-nomadik/clock.h
+ *
+ * Copyright (C) 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct clk {
+ unsigned long rate;
+};
+extern int nmdk_clk_create(struct clk *clk, const char *dev_id);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
new file mode 100644
index 00000000000..f93c5963419
--- /dev/null
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright STMicroelectronics, 2007.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/vic.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+
+/* The 8815 has 4 GPIO blocks, let's register them immediately */
+static struct nmk_gpio_platform_data cpu8815_gpio[] = {
+ {
+ .name = "GPIO-0-31",
+ .first_gpio = 0,
+ .first_irq = NOMADIK_GPIO_TO_IRQ(0),
+ .parent_irq = IRQ_GPIO0,
+ }, {
+ .name = "GPIO-32-63",
+ .first_gpio = 32,
+ .first_irq = NOMADIK_GPIO_TO_IRQ(32),
+ .parent_irq = IRQ_GPIO1,
+ }, {
+ .name = "GPIO-64-95",
+ .first_gpio = 64,
+ .first_irq = NOMADIK_GPIO_TO_IRQ(64),
+ .parent_irq = IRQ_GPIO2,
+ }, {
+ .name = "GPIO-96-127", /* 124..127 not routed to pin */
+ .first_gpio = 96,
+ .first_irq = NOMADIK_GPIO_TO_IRQ(96),
+ .parent_irq = IRQ_GPIO3,
+ }
+};
+
+#define __MEM_4K_RESOURCE(x) \
+ .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device cpu8815_amba_gpio[] = {
+ {
+ .dev = {
+ .init_name = "gpio0",
+ .platform_data = cpu8815_gpio + 0,
+ },
+ __MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
+ }, {
+ .dev = {
+ .init_name = "gpio1",
+ .platform_data = cpu8815_gpio + 1,
+ },
+ __MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
+ }, {
+ .dev = {
+ .init_name = "gpio2",
+ .platform_data = cpu8815_gpio + 2,
+ },
+ __MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
+ }, {
+ .dev = {
+ .init_name = "gpio3",
+ .platform_data = cpu8815_gpio + 3,
+ },
+ __MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
+ },
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ cpu8815_amba_gpio + 0,
+ cpu8815_amba_gpio + 1,
+ cpu8815_amba_gpio + 2,
+ cpu8815_amba_gpio + 3,
+};
+
+static int __init cpu8815_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+ amba_device_register(amba_devs[i], &iomem_resource);
+ return 0;
+}
+arch_initcall(cpu8815_init);
+
+/* All SoC devices live in the same area (see hardware.h) */
+static struct map_desc nomadik_io_desc[] __initdata = {
+ {
+ .virtual = NOMADIK_IO_VIRTUAL,
+ .pfn = __phys_to_pfn(NOMADIK_IO_PHYSICAL),
+ .length = NOMADIK_IO_SIZE,
+ .type = MT_DEVICE,
+ }
+ /* static ram and secured ram may be added later */
+};
+
+void __init cpu8815_map_io(void)
+{
+ iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
+}
+
+void __init cpu8815_init_irq(void)
+{
+ /* This modified VIC cell has two register blocks, at 0 and 0x20 */
+ vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0);
+ vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+}
+
+/*
+ * This function is called from the board init ("init_machine").
+ */
+ void __init cpu8815_platform_init(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+ /* At full speed latency must be >=2, so 0x249 in low bits */
+ l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff);
+#endif
+ return;
+}
diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c
new file mode 100644
index 00000000000..9a09b2791e0
--- /dev/null
+++ b/arch/arm/mach-nomadik/gpio.c
@@ -0,0 +1,396 @@
+/*
+ * Generic GPIO driver for logic cells found in the Nomadik SoC
+ *
+ * Copyright (C) 2008,2009 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+/*
+ * The GPIO module in the Nomadik family of Systems-on-Chip is an
+ * AMBA device, managing 32 pins and alternate functions. The logic block
+ * is currently only used in the Nomadik.
+ *
+ * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
+ */
+
+#define NMK_GPIO_PER_CHIP 32
+struct nmk_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *addr;
+ unsigned int parent_irq;
+ spinlock_t *lock;
+ /* Keep track of configured edges */
+ u32 edge_rising;
+ u32 edge_falling;
+};
+
+/* Mode functions */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+ u32 afunc, bfunc, bit;
+
+ nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+ if (!nmk_chip)
+ return -EINVAL;
+
+ bit = 1 << (gpio - nmk_chip->chip.base);
+
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+ afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+ bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+ if (gpio_mode & NMK_GPIO_ALT_A)
+ afunc |= bit;
+ if (gpio_mode & NMK_GPIO_ALT_B)
+ bfunc |= bit;
+ writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+ writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(nmk_gpio_set_mode);
+
+int nmk_gpio_get_mode(int gpio)
+{
+ struct nmk_gpio_chip *nmk_chip;
+ u32 afunc, bfunc, bit;
+
+ nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+ if (!nmk_chip)
+ return -EINVAL;
+
+ bit = 1 << (gpio - nmk_chip->chip.base);
+
+ afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
+ bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
+
+ return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
+}
+EXPORT_SYMBOL(nmk_gpio_get_mode);
+
+
+/* IRQ functions */
+static inline int nmk_gpio_get_bitmask(int gpio)
+{
+ return 1 << (gpio % 32);
+}
+
+static void nmk_gpio_irq_ack(unsigned int irq)
+{
+ int gpio;
+ struct nmk_gpio_chip *nmk_chip;
+
+ gpio = NOMADIK_IRQ_TO_GPIO(irq);
+ nmk_chip = get_irq_chip_data(irq);
+ if (!nmk_chip)
+ return;
+ writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+}
+
+static void nmk_gpio_irq_mask(unsigned int irq)
+{
+ int gpio;
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+ u32 bitmask, reg;
+
+ gpio = NOMADIK_IRQ_TO_GPIO(irq);
+ nmk_chip = get_irq_chip_data(irq);
+ bitmask = nmk_gpio_get_bitmask(gpio);
+ if (!nmk_chip)
+ return;
+
+ /* we must individually clear the two edges */
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+ if (nmk_chip->edge_rising & bitmask) {
+ reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+ reg &= ~bitmask;
+ writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+ }
+ if (nmk_chip->edge_falling & bitmask) {
+ reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+ reg &= ~bitmask;
+ writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+ }
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+};
+
+static void nmk_gpio_irq_unmask(unsigned int irq)
+{
+ int gpio;
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+ u32 bitmask, reg;
+
+ gpio = NOMADIK_IRQ_TO_GPIO(irq);
+ nmk_chip = get_irq_chip_data(irq);
+ bitmask = nmk_gpio_get_bitmask(gpio);
+ if (!nmk_chip)
+ return;
+
+ /* we must individually set the two edges */
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+ if (nmk_chip->edge_rising & bitmask) {
+ reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+ reg |= bitmask;
+ writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+ }
+ if (nmk_chip->edge_falling & bitmask) {
+ reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+ reg |= bitmask;
+ writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+ }
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+}
+
+static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+ int gpio;
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+ u32 bitmask;
+
+ gpio = NOMADIK_IRQ_TO_GPIO(irq);
+ nmk_chip = get_irq_chip_data(irq);
+ bitmask = nmk_gpio_get_bitmask(gpio);
+ if (!nmk_chip)
+ return -EINVAL;
+
+ if (type & IRQ_TYPE_LEVEL_HIGH)
+ return -EINVAL;
+ if (type & IRQ_TYPE_LEVEL_LOW)
+ return -EINVAL;
+
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+
+ nmk_chip->edge_rising &= ~bitmask;
+ if (type & IRQ_TYPE_EDGE_RISING)
+ nmk_chip->edge_rising |= bitmask;
+ writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC);
+
+ nmk_chip->edge_falling &= ~bitmask;
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ nmk_chip->edge_falling |= bitmask;
+ writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC);
+
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+ nmk_gpio_irq_unmask(irq);
+
+ return 0;
+}
+
+static struct irq_chip nmk_gpio_irq_chip = {
+ .name = "Nomadik-GPIO",
+ .ack = nmk_gpio_irq_ack,
+ .mask = nmk_gpio_irq_mask,
+ .unmask = nmk_gpio_irq_unmask,
+ .set_type = nmk_gpio_irq_set_type,
+};
+
+static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct nmk_gpio_chip *nmk_chip;
+ struct irq_chip *host_chip;
+ unsigned int gpio_irq;
+ u32 pending;
+ unsigned int first_irq;
+
+ nmk_chip = get_irq_data(irq);
+ first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+ while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
+ gpio_irq = first_irq + __ffs(pending);
+ generic_handle_irq(gpio_irq);
+ }
+ if (0) {/* don't ack parent irq, as ack == disable */
+ host_chip = get_irq_chip(irq);
+ host_chip->ack(irq);
+ }
+}
+
+static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
+{
+ unsigned int first_irq;
+ int i;
+
+ first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+ for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) {
+ set_irq_chip(i, &nmk_gpio_irq_chip);
+ set_irq_handler(i, handle_edge_irq);
+ set_irq_flags(i, IRQF_VALID);
+ set_irq_chip_data(i, nmk_chip);
+ }
+ set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
+ set_irq_data(nmk_chip->parent_irq, nmk_chip);
+ return 0;
+}
+
+/* I/O Functions */
+static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct nmk_gpio_chip *nmk_chip =
+ container_of(chip, struct nmk_gpio_chip, chip);
+
+ writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+ return 0;
+}
+
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+ int val)
+{
+ struct nmk_gpio_chip *nmk_chip =
+ container_of(chip, struct nmk_gpio_chip, chip);
+
+ writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+ return 0;
+}
+
+static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct nmk_gpio_chip *nmk_chip =
+ container_of(chip, struct nmk_gpio_chip, chip);
+ u32 bit = 1 << offset;
+
+ return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+}
+
+static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+ int val)
+{
+ struct nmk_gpio_chip *nmk_chip =
+ container_of(chip, struct nmk_gpio_chip, chip);
+ u32 bit = 1 << offset;
+
+ if (val)
+ writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+ else
+ writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip nmk_gpio_template = {
+ .direction_input = nmk_gpio_make_input,
+ .get = nmk_gpio_get_input,
+ .direction_output = nmk_gpio_make_output,
+ .set = nmk_gpio_set_output,
+ .ngpio = NMK_GPIO_PER_CHIP,
+ .can_sleep = 0,
+};
+
+static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
+{
+ struct nmk_gpio_platform_data *pdata;
+ struct nmk_gpio_chip *nmk_chip;
+ struct gpio_chip *chip;
+ int ret;
+
+ pdata = dev->dev.platform_data;
+ ret = amba_request_regions(dev, pdata->name);
+ if (ret)
+ return ret;
+
+ nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
+ if (!nmk_chip) {
+ ret = -ENOMEM;
+ goto out_amba;
+ }
+ /*
+ * The virt address in nmk_chip->addr is in the nomadik register space,
+ * so we can simply convert the resource address, without remapping
+ */
+ nmk_chip->addr = io_p2v(dev->res.start);
+ nmk_chip->chip = nmk_gpio_template;
+ nmk_chip->parent_irq = pdata->parent_irq;
+
+ chip = &nmk_chip->chip;
+ chip->base = pdata->first_gpio;
+ chip->label = pdata->name;
+ chip->dev = &dev->dev;
+ chip->owner = THIS_MODULE;
+
+ ret = gpiochip_add(&nmk_chip->chip);
+ if (ret)
+ goto out_free;
+
+ amba_set_drvdata(dev, nmk_chip);
+
+ nmk_gpio_init_irq(nmk_chip);
+
+ dev_info(&dev->dev, "Bits %i-%i at address %p\n",
+ nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+ return 0;
+
+ out_free:
+ kfree(nmk_chip);
+ out_amba:
+ amba_release_regions(dev);
+ dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
+ pdata->first_gpio, pdata->first_gpio+31);
+ return ret;
+}
+
+static int nmk_gpio_remove(struct amba_device *dev)
+{
+ struct nmk_gpio_chip *nmk_chip;
+
+ nmk_chip = amba_get_drvdata(dev);
+ gpiochip_remove(&nmk_chip->chip);
+ kfree(nmk_chip);
+ amba_release_regions(dev);
+ return 0;
+}
+
+
+/* We have 0x1f080060 and 0x1f180060, accept both using the mask */
+static struct amba_id nmk_gpio_ids[] = {
+ {
+ .id = 0x1f080060,
+ .mask = 0xffefffff,
+ },
+ {0, 0},
+};
+
+static struct amba_driver nmk_gpio_driver = {
+ .drv = {
+ .owner = THIS_MODULE,
+ .name = "gpio",
+ },
+ .probe = nmk_gpio_probe,
+ .remove = nmk_gpio_remove,
+ .suspend = NULL, /* to be done */
+ .resume = NULL,
+ .id_table = nmk_gpio_ids,
+};
+
+static int __init nmk_gpio_init(void)
+{
+ return amba_driver_register(&nmk_gpio_driver);
+}
+
+arch_initcall(nmk_gpio_init);
+
+MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
+MODULE_DESCRIPTION("Nomadik GPIO Driver");
+MODULE_LICENSE("GPL");
+
+
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
new file mode 100644
index 00000000000..abfe25a08d6
--- /dev/null
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -0,0 +1,65 @@
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+/*
+ * There are two busses in the 8815NHK.
+ * They could, in theory, be driven by the hardware component, but we
+ * use bit-bang through GPIO by now, to keep things simple
+ */
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
+ /* keep defaults for timeouts; pins are push-pull bidirectional */
+ .scl_pin = 62,
+ .sda_pin = 63,
+};
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
+ /* keep defaults for timeouts; pins are push-pull bidirectional */
+ .scl_pin = 53,
+ .sda_pin = 54,
+};
+
+/* first bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev0 = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &nhk8815_i2c_data0,
+ },
+};
+/* second bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev1 = {
+ .name = "i2c-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &nhk8815_i2c_data1,
+ },
+};
+
+static int __init nhk8815_i2c_init(void)
+{
+ nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
+ nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
+ platform_device_register(&nhk8815_i2c_dev0);
+
+ nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
+ nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
+ platform_device_register(&nhk8815_i2c_dev1);
+
+ return 0;
+}
+
+static void __exit nhk8815_i2c_exit(void)
+{
+ platform_device_unregister(&nhk8815_i2c_dev0);
+ platform_device_unregister(&nhk8815_i2c_dev1);
+ return;
+}
+
+module_init(nhk8815_i2c_init);
+module_exit(nhk8815_i2c_exit);
diff --git a/arch/arm/mach-nomadik/include/mach/clkdev.h b/arch/arm/mach-nomadik/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
new file mode 100644
index 00000000000..e876990e156
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x10000000 @ physical base address
+ movne \rx, #0xf0000000 @ virtual base
+ add \rx, \rx, #0x00100000
+ add \rx, \rx, #0x000fb000
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
new file mode 100644
index 00000000000..49f1aa3bb42
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S
@@ -0,0 +1,43 @@
+/*
+ * Low-level IRQ helper macros for Nomadik platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(NOMADIK_IC_BASE)
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ /* This stanza gets the irq mask from one of two status registers */
+ mov \irqnr, #0
+ ldr \irqstat, [\base, #VIC_REG_IRQSR0] @ get masked status
+ cmp \irqstat, #0
+ bne 1001f
+ add \irqnr, \irqnr, #32
+ ldr \irqstat, [\base, #VIC_REG_IRQSR1] @ get masked status
+
+1001: tst \irqstat, #15
+ bne 1002f
+ add \irqnr, \irqnr, #4
+ movs \irqstat, \irqstat, lsr #4
+ bne 1001b
+1002: tst \irqstat, #1
+ bne 1003f
+ add \irqnr, \irqnr, #1
+ movs \irqstat, \irqstat, lsr #1
+ bne 1002b
+1003: /* EQ will be set if no irqs pending */
+ .endm
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
new file mode 100644
index 00000000000..61577c9f9a7
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -0,0 +1,71 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * These currently cause a function call to happen, they may be optimized
+ * if needed by adding cpu-specific defines to identify blocks
+ * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
+ */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT 0x00
+#define NMK_GPIO_DATS 0x04
+#define NMK_GPIO_DATC 0x08
+#define NMK_GPIO_PDIS 0x0c
+#define NMK_GPIO_DIR 0x10
+#define NMK_GPIO_DIRS 0x14
+#define NMK_GPIO_DIRC 0x18
+#define NMK_GPIO_SLPC 0x1c
+#define NMK_GPIO_AFSLA 0x20
+#define NMK_GPIO_AFSLB 0x24
+
+#define NMK_GPIO_RIMSC 0x40
+#define NMK_GPIO_FIMSC 0x44
+#define NMK_GPIO_IS 0x48
+#define NMK_GPIO_IC 0x4c
+#define NMK_GPIO_RWIMSC 0x50
+#define NMK_GPIO_FWIMSC 0x54
+#define NMK_GPIO_WKS 0x58
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO 0
+#define NMK_GPIO_ALT_A 1
+#define NMK_GPIO_ALT_B 2
+#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+extern int nmk_gpio_get_mode(int gpio);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+ char *name;
+ int first_gpio;
+ int first_irq;
+ int parent_irq;
+};
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h
new file mode 100644
index 00000000000..6316dba3bfc
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/hardware.h
@@ -0,0 +1,90 @@
+/*
+ * This file contains the hardware definitions of the Nomadik.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * YOU should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
+#define NOMADIK_IO_VIRTUAL 0xF0000000 /* VA of IO */
+#define NOMADIK_IO_PHYSICAL 0x10000000 /* PA of IO */
+#define NOMADIK_IO_SIZE 0x00300000 /* 3MB for all regs */
+
+/* used in C code, so cast to proper type */
+#define io_p2v(x) ((void __iomem *)(x) \
+ - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+#define io_v2p(x) ((unsigned long)(x) \
+ - NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
+
+/* used in asm code, so no casts */
+#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+
+/*
+ * Base address defination for Nomadik Onchip Logic Block
+ */
+#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */
+#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */
+#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */
+#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */
+#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */
+#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */
+#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */
+#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */
+#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */
+#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */
+#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */
+#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */
+#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */
+#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */
+#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */
+#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */
+#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */
+#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */
+#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */
+#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */
+#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */
+#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */
+#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */
+#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */
+#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */
+#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */
+#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */
+#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */
+#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */
+#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */
+#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
+
+/* Other ranges, not for p2v/v2p */
+#define NOMADIK_BACKUP_RAM 0x80010000
+#define NOMADIK_EBROM 0x80000000 /* Embedded boot ROM */
+#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000 /* HAMACV Data Memory Start */
+#define NOMADIK_HAMACV_DMEM_END 0xA01FFFFF /* HAMACV Data Memory End */
+#define NOMADIK_HAMACA_DMEM 0xA0200000 /* HAMACA Data Memory Space */
+
+#define NOMADIK_FSMC_VA IO_ADDRESS(NOMADIK_FSMC_BASE)
+#define NOMADIK_MTU0_VA IO_ADDRESS(NOMADIK_MTU0_BASE)
+#define NOMADIK_MTU1_VA IO_ADDRESS(NOMADIK_MTU1_BASE)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nomadik/include/mach/io.h b/arch/arm/mach-nomadik/include/mach/io.h
new file mode 100644
index 00000000000..2e1eca1b824
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-nomadik/include/mach/io.h (copied from mach-sa1100)
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
new file mode 100644
index 00000000000..8faabc56039
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ * mach-nomadik/include/mach/irqs.h
+ *
+ * Copyright (C) ST Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_VIC_START 0 /* first VIC interrupt is 0 */
+
+/*
+ * Interrupt numbers generic for all Nomadik Chip cuts
+ */
+#define IRQ_WATCHDOG 0
+#define IRQ_SOFTINT 1
+#define IRQ_CRYPTO 2
+#define IRQ_OWM 3
+#define IRQ_MTU0 4
+#define IRQ_MTU1 5
+#define IRQ_GPIO0 6
+#define IRQ_GPIO1 7
+#define IRQ_GPIO2 8
+#define IRQ_GPIO3 9
+#define IRQ_RTC_RTT 10
+#define IRQ_SSP 11
+#define IRQ_UART0 12
+#define IRQ_DMA1 13
+#define IRQ_CLCD_MDIF 14
+#define IRQ_DMA0 15
+#define IRQ_PWRFAIL 16
+#define IRQ_UART1 17
+#define IRQ_FIRDA 18
+#define IRQ_MSP0 19
+#define IRQ_I2C0 20
+#define IRQ_I2C1 21
+#define IRQ_SDMMC 22
+#define IRQ_USBOTG 23
+#define IRQ_SVA_IT0 24
+#define IRQ_SVA_IT1 25
+#define IRQ_SAA_IT0 26
+#define IRQ_SAA_IT1 27
+#define IRQ_UART2 28
+#define IRQ_MSP2 31
+#define IRQ_L2CC 48
+#define IRQ_HPI 49
+#define IRQ_SKE 50
+#define IRQ_KP 51
+#define IRQ_MEMST 54
+#define IRQ_SGA_IT 58
+#define IRQ_USBM 60
+#define IRQ_MSP1 62
+
+#define NOMADIK_SOC_NR_IRQS 64
+
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */
+#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_SOC_NR_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_SOC_NR_IRQS)
+#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+
+/* Following two are used by entry_macro.S, to access our dual-vic */
+#define VIC_REG_IRQSR0 0
+#define VIC_REG_IRQSR1 0x20
+
+#endif /* __ASM_ARCH_IRQS_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
new file mode 100644
index 00000000000..1e5689d98ec
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ * mach-nomadik/include/mach/memory.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h
new file mode 100644
index 00000000000..76da7f08533
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/mtu.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_ARCH_MTU_H
+#define __ASM_ARCH_MTU_H
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC 0x00 /* Interrupt mask set/clear */
+#define MTU_RIS 0x04 /* Raw interrupt status */
+#define MTU_MIS 0x08 /* Masked interrupt status */
+#define MTU_ICR 0x0C /* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
+#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
+#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
+#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA 0x80
+#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK 0x0c
+#define MTU_CRn_PRESCALE_1 0x00
+#define MTU_CRn_PRESCALE_16 0x04
+#define MTU_CRn_PRESCALE_256 0x08
+#define MTU_CRn_32BITS 0x02
+#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR 0xff0
+#define MTU_ITOP 0xff4
+
+#define MTU_PERIPH_ID0 0xfe0
+#define MTU_PERIPH_ID1 0xfe4
+#define MTU_PERIPH_ID2 0xfe8
+#define MTU_PERIPH_ID3 0xfeC
+
+#define MTU_PCELL0 0xff0
+#define MTU_PCELL1 0xff4
+#define MTU_PCELL2 0xff8
+#define MTU_PCELL3 0xffC
+
+#endif /* __ASM_ARCH_MTU_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
new file mode 100644
index 00000000000..a4e468cf63d
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -0,0 +1,22 @@
+
+/*
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_NOMADIK_8815
+
+extern void cpu8815_map_io(void);
+extern void cpu8815_platform_init(void);
+extern void cpu8815_init_irq(void);
+extern struct sys_timer nomadik_timer;
+
+#endif /* NOMADIK_8815 */
+
+#endif /* __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
new file mode 100644
index 00000000000..7119f688116
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/system.h
@@ -0,0 +1,45 @@
+/*
+ * mach-nomadik/include/mach/system.h
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+
+ /* FIXME: use egpio when implemented */
+
+ /* Write anything to Reset status register */
+ writel(1, src_rstsr);
+}
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/timex.h b/arch/arm/mach-nomadik/include/mach/timex.h
new file mode 100644
index 00000000000..318b8896ce9
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 2400000
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
new file mode 100644
index 00000000000..071003bc845
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+/* we need the constants in amba/serial.h, but it refers to amba_device */
+struct amba_device;
+#include <linux/amba/serial.h>
+
+#define NOMADIK_UART_DR 0x101FB000
+#define NOMADIK_UART_LCRH 0x101FB02c
+#define NOMADIK_UART_CR 0x101FB030
+#define NOMADIK_UART_FR 0x101FB018
+
+static void putc(const char c)
+{
+ /* Do nothing if the UART is not enabled. */
+ if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+ return;
+
+ if (c == '\n')
+ putc('\r');
+
+ while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF)
+ barrier();
+ writeb(c, NOMADIK_UART_DR);
+}
+
+static void flush(void)
+{
+ if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+ return;
+ while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY)
+ barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
new file mode 100644
index 00000000000..be12e31ea52
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/vmalloc.h
@@ -0,0 +1,2 @@
+
+#define VMALLOC_END 0xe8000000
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
new file mode 100644
index 00000000000..d1738e7061d
--- /dev/null
+++ b/arch/arm/mach-nomadik/timer.c
@@ -0,0 +1,164 @@
+/*
+ * linux/arch/arm/mach-nomadik/timer.c
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/jiffies.h>
+#include <asm/mach/time.h>
+#include <mach/mtu.h>
+
+#define TIMER_CTRL 0x80 /* No divisor */
+#define TIMER_PERIODIC 0x40
+#define TIMER_SZ32BIT 0x02
+
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK 0x00007fff
+#define SRC_CR_INIT_VAL 0x2aaa8000
+
+static u32 nmdk_count; /* accumulated count */
+static u32 nmdk_cycle; /* write-once */
+static __iomem void *mtu_base;
+
+/*
+ * clocksource: the MTU device is a decrementing counters, so we negate
+ * the value being read.
+ */
+static cycle_t nmdk_read_timer(struct clocksource *cs)
+{
+ u32 count = readl(mtu_base + MTU_VAL(0));
+ return nmdk_count + nmdk_cycle - count;
+
+}
+
+static struct clocksource nmdk_clksrc = {
+ .name = "mtu_0",
+ .rating = 120,
+ .read = nmdk_read_timer,
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Clockevent device: currently only periodic mode is supported
+ */
+static void nmdk_clkevt_mode(enum clock_event_mode mode,
+ struct clock_event_device *dev)
+{
+ unsigned long flags;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ /* enable interrupts -- and count current value? */
+ raw_local_irq_save(flags);
+ writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
+ raw_local_irq_restore(flags);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ BUG(); /* Not supported, yet */
+ /* FALLTHROUGH */
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ /* disable irq */
+ raw_local_irq_save(flags);
+ writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
+ raw_local_irq_restore(flags);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static struct clock_event_device nmdk_clkevt = {
+ .name = "mtu_0",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .shift = 32,
+ .rating = 100,
+ .set_mode = nmdk_clkevt_mode,
+};
+
+/*
+ * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
+ * as we are the only users of mtu0 by now.
+ */
+static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
+{
+ /* ack: "interrupt clear register" */
+ writel( 1 << 0, mtu_base + MTU_ICR);
+
+ /* we can't count lost ticks, unfortunately */
+ nmdk_count += nmdk_cycle;
+ nmdk_clkevt.event_handler(&nmdk_clkevt);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static struct irqaction nmdk_timer_irq = {
+ .name = "Nomadik Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = nmdk_timer_interrupt,
+};
+
+static void nmdk_timer_reset(void)
+{
+ u32 cr;
+
+ writel(0, mtu_base + MTU_CR(0)); /* off */
+
+ /* configure load and background-load, and fire it up */
+ writel(nmdk_cycle, mtu_base + MTU_LR(0));
+ writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+ cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
+ writel(cr, mtu_base + MTU_CR(0));
+ writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
+}
+
+static void __init nmdk_timer_init(void)
+{
+ u32 src_cr;
+ unsigned long rate;
+ int bits;
+
+ rate = CLOCK_TICK_RATE; /* 2.4MHz */
+ nmdk_cycle = (rate + HZ/2) / HZ;
+
+ /* Configure timer sources in "system reset controller" ctrl reg */
+ src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+ src_cr &= SRC_CR_INIT_MASK;
+ src_cr |= SRC_CR_INIT_VAL;
+ writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+ /* Save global pointer to mtu, used by functions above */
+ mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+ /* Init the timer and register clocksource */
+ nmdk_timer_reset();
+
+ nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
+ bits = 8*sizeof(nmdk_count);
+ nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
+
+ clocksource_register(&nmdk_clksrc);
+
+ /* Register irq and clockevents */
+ setup_irq(IRQ_MTU0, &nmdk_timer_irq);
+ nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+ nmdk_clkevt.cpumask = cpumask_of(0);
+ clockevents_register_device(&nmdk_clkevt);
+}
+
+struct sys_timer nomadik_timer = {
+ .init = nmdk_timer_init,
+};
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index b0c7402248f..1b223076ceb 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -39,7 +39,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
};
static struct omap_uart_config sdp4430_uart_config __initdata = {
- .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2),
+ .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
};
static struct omap_lcd_config sdp4430_lcd_config __initdata = {
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 0447d26d454..a846aa1ebb4 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -173,6 +173,42 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
#define OMAP34XX_MCBSP_PDATA_SZ 0
#endif
+static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
+ {
+ .phys_base = OMAP44XX_MCBSP1_BASE,
+ .dma_rx_sync = OMAP44XX_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP44XX_DMA_MCBSP1_TX,
+ .rx_irq = INT_24XX_MCBSP1_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP1_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ },
+ {
+ .phys_base = OMAP44XX_MCBSP2_BASE,
+ .dma_rx_sync = OMAP44XX_DMA_MCBSP2_RX,
+ .dma_tx_sync = OMAP44XX_DMA_MCBSP2_TX,
+ .rx_irq = INT_24XX_MCBSP2_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP2_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ },
+ {
+ .phys_base = OMAP44XX_MCBSP3_BASE,
+ .dma_rx_sync = OMAP44XX_DMA_MCBSP3_RX,
+ .dma_tx_sync = OMAP44XX_DMA_MCBSP3_TX,
+ .rx_irq = INT_24XX_MCBSP3_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP3_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ },
+ {
+ .phys_base = OMAP44XX_MCBSP4_BASE,
+ .dma_rx_sync = OMAP44XX_DMA_MCBSP4_RX,
+ .dma_tx_sync = OMAP44XX_DMA_MCBSP4_TX,
+ .rx_irq = INT_24XX_MCBSP4_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP4_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ },
+};
+#define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata)
+
static int __init omap2_mcbsp_init(void)
{
if (cpu_is_omap2420())
@@ -181,6 +217,8 @@ static int __init omap2_mcbsp_init(void)
omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
if (cpu_is_omap34xx())
omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
+ if (cpu_is_omap44xx())
+ omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ;
mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
GFP_KERNEL);
@@ -196,6 +234,9 @@ static int __init omap2_mcbsp_init(void)
if (cpu_is_omap34xx())
omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
OMAP34XX_MCBSP_PDATA_SZ);
+ if (cpu_is_omap44xx())
+ omap_mcbsp_register_board_cfg(omap44xx_mcbsp_pdata,
+ OMAP44XX_MCBSP_PDATA_SZ);
return omap_mcbsp_init();
}
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index a7421a50410..ce22344b94e 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -109,6 +109,16 @@ static struct plat_serial8250_port serial_platform_data2[] = {
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
+#ifdef CONFIG_ARCH_OMAP4
+ .membase = IO_ADDRESS(OMAP_UART4_BASE),
+ .mapbase = OMAP_UART4_BASE,
+ .irq = 70,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
+ }, {
+#endif
.flags = 0
}
};
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2c7035d8dcb..c3d513cad5a 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -89,6 +89,27 @@ config MACH_EDMINI_V2
Say 'Y' here if you want your kernel to support the
LaCie Ethernet Disk mini V2.
+config MACH_D2NET
+ bool "LaCie d2 Network"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie d2 Network NAS.
+
+config MACH_BIGDISK
+ bool "LaCie Big Disk Network"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie Big Disk Network NAS.
+
+config MACH_NET2BIG
+ bool "LaCie 2Big Network"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie 2Big Network NAS.
+
config MACH_MSS2
bool "Maxtor Shared Storage II"
help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index edc38e2c856..89772fcd65c 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -12,6 +12,9 @@ obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o
obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o
obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o
obj-$(CONFIG_MACH_EDMINI_V2) += edmini_v2-setup.o
+obj-$(CONFIG_MACH_D2NET) += d2net-setup.o
+obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o
+obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o
obj-$(CONFIG_MACH_MSS2) += mss2-setup.o
obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o
obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index d78731edebb..1a5d6a0e260 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -84,7 +84,8 @@ static int __init orion5x_cpu_win_can_remap(int win)
orion5x_pcie_id(&dev, &rev);
if ((dev == MV88F5281_DEV_ID && win < 4)
|| (dev == MV88F5182_DEV_ID && win < 2)
- || (dev == MV88F5181_DEV_ID && win < 2))
+ || (dev == MV88F5181_DEV_ID && win < 2)
+ || (dev == MV88F6183_DEV_ID && win < 4))
return 1;
return 0;
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
new file mode 100644
index 00000000000..9d4bf763f25
--- /dev/null
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-orion5x/d2net-setup.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define D2NET_NOR_BOOT_BASE 0xfff80000
+#define D2NET_NOR_BOOT_SIZE SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition d2net_partitions[] = {
+ {
+ .name = "Full512kb",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct physmap_flash_data d2net_nor_flash_data = {
+ .width = 1,
+ .parts = d2net_partitions,
+ .nr_parts = ARRAY_SIZE(d2net_partitions),
+};
+
+static struct resource d2net_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = D2NET_NOR_BOOT_BASE,
+ .end = D2NET_NOR_BOOT_BASE
+ + D2NET_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device d2net_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &d2net_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &d2net_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip | description
+ * 0x32 | Ricoh 5C372b | RTC
+ * 0x3e | GMT G762 | PWM fan controller
+ * 0x50 | HT24LC08 | eeprom (1kB)
+ *
+ * TODO: Add G762 support to the g760a driver.
+ */
+static struct i2c_board_info __initdata d2net_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rs5c372b", 0x32),
+ }, {
+ I2C_BOARD_INFO("24c08", 0x50),
+ },
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_sata_data = {
+ .n_ports = 2,
+};
+
+#define D2NET_GPIO_SATA0_POWER 3
+#define D2NET_GPIO_SATA1_POWER 12
+
+static void __init d2net_sata_power_init(void)
+{
+ int err;
+
+ err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
+ if (err == 0) {
+ err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
+ if (err)
+ gpio_free(D2NET_GPIO_SATA0_POWER);
+ }
+ if (err)
+ pr_err("d2net: failed to configure SATA0 power GPIO\n");
+
+ err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
+ if (err == 0) {
+ err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
+ if (err)
+ gpio_free(D2NET_GPIO_SATA1_POWER);
+ }
+ if (err)
+ pr_err("d2net: failed to configure SATA1 power GPIO\n");
+}
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity. This feature is disabled to make this LED compatible with
+ * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
+ * GPIO's and have to stay in an active state. This is needed to set the blue
+ * LED in a "fix on" state regardless of the SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off | blink_ctrl | SATA active | LED state
+ * | | |
+ * 1 | x | x | off
+ * 0 | 0 | 0 | off
+ * 0 | 1 | 0 | blink (rate 300ms)
+ * 0 | x | 1 | on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ * Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED 6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16
+#define D2NET_GPIO_BLUE_LED_OFF 23
+#define D2NET_GPIO_SATA0_ACT 14
+#define D2NET_GPIO_SATA1_ACT 15
+
+static struct gpio_led d2net_leds[] = {
+ {
+ .name = "d2net:blue:power",
+ .gpio = D2NET_GPIO_BLUE_LED_OFF,
+ .active_low = 1,
+ },
+ {
+ .name = "d2net:red:fail",
+ .gpio = D2NET_GPIO_RED_LED,
+ },
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+ .num_leds = ARRAY_SIZE(d2net_leds),
+ .leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_led_data,
+ },
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+ /* Configure GPIO over MPP max number. */
+ orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
+
+ if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
+ return;
+ if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
+ goto err_free_1;
+ if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
+ goto err_free_1;
+ if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
+ goto err_free_2;
+ platform_device_register(&d2net_gpio_leds);
+ return;
+
+err_free_2:
+ gpio_free(D2NET_GPIO_SATA1_ACT);
+err_free_1:
+ gpio_free(D2NET_GPIO_SATA0_ACT);
+ return;
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_GPIO_PUSH_BUTTON 18
+#define D2NET_GPIO_POWER_SWITCH_ON 8
+#define D2NET_GPIO_POWER_SWITCH_OFF 9
+
+#define D2NET_SWITCH_POWER_ON 0x1
+#define D2NET_SWITCH_POWER_OFF 0x2
+
+static struct gpio_keys_button d2net_buttons[] = {
+ {
+ .type = EV_SW,
+ .code = D2NET_SWITCH_POWER_OFF,
+ .gpio = D2NET_GPIO_POWER_SWITCH_OFF,
+ .desc = "Power rocker switch (auto|off)",
+ .active_low = 0,
+ },
+ {
+ .type = EV_SW,
+ .code = D2NET_SWITCH_POWER_ON,
+ .gpio = D2NET_GPIO_POWER_SWITCH_ON,
+ .desc = "Power rocker switch (on|auto)",
+ .active_low = 0,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .gpio = D2NET_GPIO_PUSH_BUTTON,
+ .desc = "Front Push Button",
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_platform_data d2net_button_data = {
+ .buttons = d2net_buttons,
+ .nbuttons = ARRAY_SIZE(d2net_buttons),
+};
+
+static struct platform_device d2net_gpio_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_button_data,
+ },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* Board ID (bit 0) */
+ { 1, MPP_GPIO }, /* Board ID (bit 1) */
+ { 2, MPP_GPIO }, /* Board ID (bit 2) */
+ { 3, MPP_GPIO }, /* SATA 0 power */
+ { 4, MPP_UNUSED },
+ { 5, MPP_GPIO }, /* Fan fail detection */
+ { 6, MPP_GPIO }, /* Red front LED */
+ { 7, MPP_UNUSED },
+ { 8, MPP_GPIO }, /* Rear power switch (on|auto) */
+ { 9, MPP_GPIO }, /* Rear power switch (auto|off) */
+ { 10, MPP_UNUSED },
+ { 11, MPP_UNUSED },
+ { 12, MPP_GPIO }, /* SATA 1 power */
+ { 13, MPP_UNUSED },
+ { 14, MPP_GPIO }, /* SATA 0 active */
+ { 15, MPP_GPIO }, /* SATA 1 active */
+ { 16, MPP_GPIO }, /* Blue front LED blink control */
+ { 17, MPP_UNUSED },
+ { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */
+ { 19, MPP_UNUSED },
+ { -1 }
+ /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+ /* 23: Blue front LED off */
+ /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
+};
+
+static void __init d2net_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(d2net_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_eth_init(&d2net_eth_data);
+ orion5x_i2c_init();
+ orion5x_uart0_init();
+
+ d2net_sata_power_init();
+ orion5x_sata_init(&d2net_sata_data);
+
+ orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
+ D2NET_NOR_BOOT_SIZE);
+ platform_device_register(&d2net_nor_flash);
+
+ platform_device_register(&d2net_gpio_buttons);
+
+ d2net_gpio_leds_init();
+
+ pr_notice("d2net: Flash write are not yet supported.\n");
+
+ i2c_register_board_info(0, d2net_i2c_devices,
+ ARRAY_SIZE(d2net_i2c_devices));
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+
+#ifdef CONFIG_MACH_D2NET
+MACHINE_START(D2NET, "LaCie d2 Network")
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = d2net_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_BIGDISK
+MACHINE_START(BIGDISK, "LaCie Big Disk Network")
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = d2net_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
+#endif
+
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
new file mode 100644
index 00000000000..7bd6283476f
--- /dev/null
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -0,0 +1,431 @@
+/*
+ * arch/arm/mach-orion5x/net2big-setup.c
+ *
+ * LaCie 2Big Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie 2Big Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define NET2BIG_NOR_BOOT_BASE 0xfff80000
+#define NET2BIG_NOR_BOOT_SIZE SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition net2big_partitions[] = {
+ {
+ .name = "Full512kb",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00000000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct physmap_flash_data net2big_nor_flash_data = {
+ .width = 1,
+ .parts = net2big_partitions,
+ .nr_parts = ARRAY_SIZE(net2big_partitions),
+};
+
+static struct resource net2big_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = NET2BIG_NOR_BOOT_BASE,
+ .end = NET2BIG_NOR_BOOT_BASE
+ + NET2BIG_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device net2big_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &net2big_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &net2big_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data net2big_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip | description
+ * 0x32 | Ricoh 5C372b | RTC
+ * 0x50 | HT24LC08 | eeprom (1kB)
+ */
+static struct i2c_board_info __initdata net2big_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rs5c372b", 0x32),
+ }, {
+ I2C_BOARD_INFO("24c08", 0x50),
+ },
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data net2big_sata_data = {
+ .n_ports = 2,
+};
+
+#define NET2BIG_GPIO_SATA_POWER_REQ 19
+#define NET2BIG_GPIO_SATA0_POWER 23
+#define NET2BIG_GPIO_SATA1_POWER 25
+
+static void __init net2big_sata_power_init(void)
+{
+ int err;
+
+ /* Configure GPIOs over MPP max number. */
+ orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1);
+ orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1);
+
+ err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status");
+ if (err == 0) {
+ err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER);
+ if (err)
+ gpio_free(NET2BIG_GPIO_SATA0_POWER);
+ }
+ if (err) {
+ pr_err("net2big: failed to setup SATA0 power GPIO\n");
+ return;
+ }
+
+ err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status");
+ if (err == 0) {
+ err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER);
+ if (err)
+ gpio_free(NET2BIG_GPIO_SATA1_POWER);
+ }
+ if (err) {
+ pr_err("net2big: failed to setup SATA1 power GPIO\n");
+ goto err_free_1;
+ }
+
+ err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request");
+ if (err == 0) {
+ err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0);
+ if (err)
+ gpio_free(NET2BIG_GPIO_SATA_POWER_REQ);
+ }
+ if (err) {
+ pr_err("net2big: failed to setup SATA power request GPIO\n");
+ goto err_free_2;
+ }
+
+ if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) &&
+ gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) {
+ return;
+ }
+
+ /*
+ * SATA power up on both disk is done by pulling high the CPLD power
+ * request line. The 300ms delay is related to the CPLD clock and is
+ * needed to be sure that the CPLD has take into account the low line
+ * status.
+ */
+ msleep(300);
+ gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1);
+ pr_info("net2big: power up SATA hard disks\n");
+
+ return;
+
+err_free_2:
+ gpio_free(NET2BIG_GPIO_SATA1_POWER);
+err_free_1:
+ gpio_free(NET2BIG_GPIO_SATA0_POWER);
+
+ return;
+}
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
+ * single GPIO line and are compatible with the leds-gpio driver.
+ *
+ * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * in the following array:
+ *
+ * SATAx blue LED | SATAx activity | LED state
+ * | |
+ * 0 | 0 | blink (rate 300ms)
+ * 1 | 0 | off
+ * ? | 1 | on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ * Blue LED have priority.
+ */
+
+#define NET2BIG_GPIO_PWR_RED_LED 6
+#define NET2BIG_GPIO_PWR_BLUE_LED 16
+#define NET2BIG_GPIO_PWR_LED_BLINK_STOP 7
+
+#define NET2BIG_GPIO_SATA0_RED_LED 11
+#define NET2BIG_GPIO_SATA1_RED_LED 10
+
+#define NET2BIG_GPIO_SATA0_BLUE_LED 17
+#define NET2BIG_GPIO_SATA1_BLUE_LED 13
+
+static struct gpio_led net2big_leds[] = {
+ {
+ .name = "net2big:red:power",
+ .gpio = NET2BIG_GPIO_PWR_RED_LED,
+ },
+ {
+ .name = "net2big:blue:power",
+ .gpio = NET2BIG_GPIO_PWR_BLUE_LED,
+ },
+ {
+ .name = "net2big:red:sata0",
+ .gpio = NET2BIG_GPIO_SATA0_RED_LED,
+ },
+ {
+ .name = "net2big:red:sata1",
+ .gpio = NET2BIG_GPIO_SATA1_RED_LED,
+ },
+};
+
+static struct gpio_led_platform_data net2big_led_data = {
+ .num_leds = ARRAY_SIZE(net2big_leds),
+ .leds = net2big_leds,
+};
+
+static struct platform_device net2big_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &net2big_led_data,
+ },
+};
+
+static void __init net2big_gpio_leds_init(void)
+{
+ int err;
+
+ /* Stop initial CPLD slow red/blue blinking on power LED. */
+ err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP,
+ "Power LED blink stop");
+ if (err == 0) {
+ err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1);
+ if (err)
+ gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP);
+ }
+ if (err)
+ pr_err("net2big: failed to setup power LED blink GPIO\n");
+
+ /*
+ * Configure SATA0 and SATA1 blue LEDs to blink in relation with the
+ * hard disk activity.
+ */
+ err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED,
+ "SATA0 blue LED control");
+ if (err == 0) {
+ err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1);
+ if (err)
+ gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED);
+ }
+ if (err)
+ pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");
+
+ err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED,
+ "SATA1 blue LED control");
+ if (err == 0) {
+ err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1);
+ if (err)
+ gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED);
+ }
+ if (err)
+ pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
+
+ platform_device_register(&net2big_gpio_leds);
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NET2BIG_GPIO_PUSH_BUTTON 18
+#define NET2BIG_GPIO_POWER_SWITCH_ON 8
+#define NET2BIG_GPIO_POWER_SWITCH_OFF 9
+
+#define NET2BIG_SWITCH_POWER_ON 0x1
+#define NET2BIG_SWITCH_POWER_OFF 0x2
+
+static struct gpio_keys_button net2big_buttons[] = {
+ {
+ .type = EV_SW,
+ .code = NET2BIG_SWITCH_POWER_OFF,
+ .gpio = NET2BIG_GPIO_POWER_SWITCH_OFF,
+ .desc = "Power rocker switch (auto|off)",
+ .active_low = 0,
+ },
+ {
+ .type = EV_SW,
+ .code = NET2BIG_SWITCH_POWER_ON,
+ .gpio = NET2BIG_GPIO_POWER_SWITCH_ON,
+ .desc = "Power rocker switch (on|auto)",
+ .active_low = 0,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .gpio = NET2BIG_GPIO_PUSH_BUTTON,
+ .desc = "Front Push Button",
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_platform_data net2big_button_data = {
+ .buttons = net2big_buttons,
+ .nbuttons = ARRAY_SIZE(net2big_buttons),
+};
+
+static struct platform_device net2big_gpio_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &net2big_button_data,
+ },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* Raid mode (bit 0) */
+ { 1, MPP_GPIO }, /* USB port 2 fuse (0 = Fail, 1 = Ok) */
+ { 2, MPP_GPIO }, /* Raid mode (bit 1) */
+ { 3, MPP_GPIO }, /* Board ID (bit 0) */
+ { 4, MPP_GPIO }, /* Fan activity (0 = Off, 1 = On) */
+ { 5, MPP_GPIO }, /* Fan fail detection */
+ { 6, MPP_GPIO }, /* Red front LED (0 = Off, 1 = On) */
+ { 7, MPP_GPIO }, /* Disable initial blinking on front LED */
+ { 8, MPP_GPIO }, /* Rear power switch (on|auto) */
+ { 9, MPP_GPIO }, /* Rear power switch (auto|off) */
+ { 10, MPP_GPIO }, /* SATA 1 red LED (0 = Off, 1 = On) */
+ { 11, MPP_GPIO }, /* SATA 0 red LED (0 = Off, 1 = On) */
+ { 12, MPP_GPIO }, /* Board ID (bit 1) */
+ { 13, MPP_GPIO }, /* SATA 1 blue LED blink control */
+ { 14, MPP_SATA_LED },
+ { 15, MPP_SATA_LED },
+ { 16, MPP_GPIO }, /* Blue front LED control */
+ { 17, MPP_GPIO }, /* SATA 0 blue LED blink control */
+ { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */
+ { 19, MPP_GPIO }, /* SATA{0,1} power On/Off request */
+ { -1 }
+ /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+ /* 23: SATA 0 power status */
+ /* 24: Board power off */
+ /* 25: SATA 1 power status */
+};
+
+#define NET2BIG_GPIO_POWER_OFF 24
+
+static void net2big_power_off(void)
+{
+ gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1);
+}
+
+static void __init net2big_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(net2big_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&net2big_eth_data);
+ orion5x_i2c_init();
+ orion5x_uart0_init();
+ orion5x_xor_init();
+
+ net2big_sata_power_init();
+ orion5x_sata_init(&net2big_sata_data);
+
+ orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
+ NET2BIG_NOR_BOOT_SIZE);
+ platform_device_register(&net2big_nor_flash);
+
+ platform_device_register(&net2big_gpio_buttons);
+ net2big_gpio_leds_init();
+
+ i2c_register_board_info(0, net2big_i2c_devices,
+ ARRAY_SIZE(net2big_i2c_devices));
+
+ orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);
+
+ if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = net2big_power_off;
+ else
+ pr_err("net2big: failed to configure power-off GPIO\n");
+
+ pr_notice("net2big: Flash writing is not yet supported.\n");
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+MACHINE_START(NET2BIG, "LaCie 2Big Network")
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = net2big_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 2546c066cd6..629e05d1196 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -678,8 +678,8 @@ static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enab
dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
}
- if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
- {
+ if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
+ (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL))) {
dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
corgi_goto_sleep(alarm_time, alarm_enable, state);
return 1;
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index d4cfa214538..dfc9b0bc6eb 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -75,7 +75,7 @@ config MACH_REALVIEW_PBX
config REALVIEW_HIGH_PHYS_OFFSET
bool "High physical base address for the RealView platform"
- depends on !MACH_REALVIEW_PB1176
+ depends on MMU && !MACH_REALVIEW_PB1176
default y
help
RealView boards other than PB1176 have the RAM available at
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index facbd49eec6..dc3519c50ab 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -221,6 +221,9 @@ arch_initcall(realview_i2c_init);
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
+/*
+ * This is only used if GPIOLIB support is disabled
+ */
static unsigned int realview_mmc_status(struct device *dev)
{
struct amba_device *adev = container_of(dev, struct amba_device, dev);
@@ -237,11 +240,15 @@ static unsigned int realview_mmc_status(struct device *dev)
struct mmc_platform_data realview_mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
+ .gpio_wp = 17,
+ .gpio_cd = 16,
};
struct mmc_platform_data realview_mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
+ .gpio_wp = 19,
+ .gpio_cd = 18,
};
/*
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
index b42c14f89ac..8a638d15797 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -25,6 +25,7 @@
#include <asm/sizes.h>
/* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
/*
* Statically mapped addresses:
*
@@ -33,6 +34,9 @@
* 1fxx xxxx -> fexx xxxx
*/
#define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000)
+#else
+#define IO_ADDRESS(x) (x)
+#endif
#define __io_address(n) __io(IO_ADDRESS(n))
#endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ac0e83f1cc3..a88458b4799 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -20,6 +20,7 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/localtimer.h>
+#include <asm/unified.h>
#include <mach/board-eb.h>
#include <mach/board-pb11mp.h>
@@ -137,26 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
static void __init poke_milo(void)
{
- extern void secondary_startup(void);
-
/* nobody is to be released from the pen yet */
pen_release = -1;
/*
- * write the address of secondary startup into the system-wide
- * flags register, then clear the bottom two bits, which is what
- * BootMonitor is waiting for
+ * Write the address of secondary startup into the system-wide flags
+ * register. The BootMonitor waits for this register to become
+ * non-zero.
*/
-#if 1
#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
- __raw_writel(virt_to_phys(realview_secondary_startup),
- __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_FLAGSS_OFFSET);
#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
- __raw_writel(3,
+ __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
__io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_FLAGSC_OFFSET);
-#endif
+ REALVIEW_SYS_FLAGSS_OFFSET);
mb();
}
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 8dfa44e08a9..abd13b44867 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -113,6 +114,21 @@ static void __init realview_eb_map_io(void)
iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView EB AMBA devices
*/
@@ -189,9 +205,9 @@ AMBA_DEVICE(clcd, "dev:20", EB_CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", EB_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", EB_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 25efe71a67c..17fbb0e889b 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -107,6 +108,21 @@ static void __init realview_pb1176_map_io(void)
iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PB1176 AMBA devices
*/
@@ -164,9 +180,9 @@ AMBA_DEVICE(uart3, "fpga:09", PB1176_UART3, NULL);
AMBA_DEVICE(smc, "dev:00", PB1176_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PB1176_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PB1176_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PB1176_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index dc4b1694390..fdd042b85f4 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -108,6 +109,21 @@ static void __init realview_pb11mp_map_io(void)
iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PB11MPCore AMBA devices
*/
@@ -166,9 +182,9 @@ AMBA_DEVICE(uart3, "fpga:09", PB11MP_UART3, NULL);
AMBA_DEVICE(smc, "dev:00", PB11MP_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PB11MP_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PB11MP_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index d6ac1eb8657..70bba9900d9 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -98,6 +99,21 @@ static void __init realview_pba8_map_io(void)
iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PBA8Core AMBA devices
*/
@@ -156,9 +172,9 @@ AMBA_DEVICE(uart3, "fpga:09", PBA8_UART3, NULL);
AMBA_DEVICE(smc, "dev:00", PBA8_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PBA8_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PBA8_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ede2a57240a..ce6c5d25fbe 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -118,6 +119,21 @@ static void __init realview_pbx_map_io(void)
iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PBXCore AMBA devices
*/
@@ -176,9 +192,9 @@ AMBA_DEVICE(uart3, "fpga:09", PBX_UART3, NULL);
AMBA_DEVICE(smc, "dev:00", PBX_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PBX_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PBX_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PBX_UART0, NULL);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 41bb65d5b91..d8c023d4df3 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -12,6 +12,7 @@ config CPU_S3C2410
select S3C2410_GPIO
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
+ select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -45,6 +46,22 @@ config MACH_BAST_IDE
Internal node for machines with an BAST style IDE
interface
+# cpu frequency scaling support
+
+config S3C2410_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLLTABLE
+ bool
+ depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+ default y
+ help
+ Select the PLL table for the S3C2410
+
menu "S3C2410 Machines"
config ARCH_SMDK2410
@@ -79,6 +96,7 @@ config MACH_N30
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
+ select S3C2410_IOTIMING if S3C2410_CPUFREQ
select PM_SIMTEC if PM
select SIMTEC_NOR
select MACH_BAST_IDE
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index fca02f82711..2ab5ba4b266 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,6 +15,8 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
obj-$(CONFIG_S3C2410_GPIO) += gpio.o
+obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
+obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
# Machine support
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
new file mode 100644
index 00000000000..9d1186877d0
--- /dev/null
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -0,0 +1,159 @@
+/* linux/arch/arm/mach-s3c2410/cpu-freq.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ u32 clkdiv = 0;
+
+ if (cfg->divs.h_divisor == 2)
+ clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+ if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+ clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long hclk, fclk, pclk;
+ unsigned int hdiv, pdiv;
+ unsigned long hclk_max;
+
+ fclk = cfg->freq.fclk;
+ hclk_max = cfg->max.hclk;
+
+ cfg->freq.armclk = fclk;
+
+ s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+ __func__, fclk, hclk_max);
+
+ hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+ hclk = fclk / hdiv;
+
+ if (hclk > cfg->max.hclk) {
+ s3c_freq_dbg("%s: hclk too big\n", __func__);
+ return -EINVAL;
+ }
+
+ pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+ pclk = hclk / pdiv;
+
+ if (pclk > cfg->max.pclk) {
+ s3c_freq_dbg("%s: pclk too big\n", __func__);
+ return -EINVAL;
+ }
+
+ pdiv *= hdiv;
+
+ /* record the result */
+ cfg->divs.p_divisor = pdiv;
+ cfg->divs.h_divisor = hdiv;
+
+ return 0 ;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+ .max = {
+ .fclk = 200000000,
+ .hclk = 100000000,
+ .pclk = 50000000,
+ },
+
+ /* transition latency is about 5ms worst-case, so
+ * set 10ms to be sure */
+ .latency = 10000000,
+
+ .locktime_m = 150,
+ .locktime_u = 150,
+ .locktime_bits = 12,
+
+ .need_pll = 1,
+
+ .name = "s3c2410",
+ .calc_iotiming = s3c2410_iotiming_calc,
+ .set_iotiming = s3c2410_iotiming_set,
+ .get_iotiming = s3c2410_iotiming_get,
+ .resume_clocks = s3c2410_setup_clocks,
+
+ .set_fvco = s3c2410_set_fvco,
+ .set_refresh = s3c2410_cpufreq_setrefresh,
+ .set_divs = s3c2410_cpufreq_setdivs,
+ .calc_divs = s3c2410_cpufreq_calcdivs,
+
+ .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+{
+ return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2410_cpufreq_driver = {
+ .add = s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2410_sysclass,
+ &s3c2410_cpufreq_driver);
+}
+
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+{
+ /* alter the maximum freq settings for S3C2410A. If a board knows
+ * it only has a maximum of 200, then it should register its own
+ * limits. */
+
+ s3c2410_cpufreq_info.max.fclk = 266000000;
+ s3c2410_cpufreq_info.max.hclk = 133000000;
+ s3c2410_cpufreq_info.max.pclk = 66500000;
+ s3c2410_cpufreq_info.name = "s3c2410a";
+
+ return s3c2410_cpufreq_add(sysdev);
+}
+
+static struct sysdev_driver s3c2410a_cpufreq_driver = {
+ .add = s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass,
+ &s3c2410a_cpufreq_driver);
+}
+
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbf96e60d99..63b753f56c6 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -164,6 +164,17 @@ static int __init s3c2410_dma_drvinit(void)
}
arch_initcall(s3c2410_dma_drvinit);
+
+static struct sysdev_driver s3c2410a_dma_driver = {
+ .add = s3c2410_dma_add,
+};
+
+static int __init s3c2410a_dma_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+}
+
+arch_initcall(s3c2410a_dma_drvinit);
#endif
#if defined(CONFIG_CPU_S3C2442)
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 2a2384ffa7b..6c12c6312ad 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -164,6 +164,12 @@
#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3
#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#endif
+
/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
#define FIQ_START IRQ_EINT0
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212cb1c..b049e61460b 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -67,6 +67,13 @@
#define S3C2443_PA_HSMMC (0x4A800000)
#define S3C2443_SZ_HSMMC (256)
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC (0x4F000000)
+#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
+
+#define S3C2412_PA_EBI (0x48800000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+
/* physical addresses of all the chip-select areas */
#define S3C2410_CS0 (0x00000000)
@@ -103,5 +110,6 @@
#define S3C_PA_UART S3C24XX_PA_UART
#define S3C_PA_USBHOST S3C2410_PA_USBHOST
#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC
+#define S3C_PA_NAND S3C24XX_PA_NAND
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index b278d0c45cc..f6e8eec879c 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -328,13 +328,15 @@
#define S3C2410_GPD8_VD16 (0x02 << 16)
#define S3C2400_GPD8_TOUT3 (0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1 (0x03 << 16)
#define S3C2410_GPD9_VD17 (0x02 << 18)
#define S3C2400_GPD9_TCLK0 (0x02 << 18)
-#define S3C2410_GPD9_MASK (0x03 << 18)
+#define S3C2440_GPD9_SPIMOSI1 (0x03 << 18)
#define S3C2410_GPD10_VD18 (0x02 << 20)
#define S3C2400_GPD10_nWAIT (0x02 << 20)
+#define S3C2440_GPD10_SPICLK1 (0x03 << 20)
#define S3C2410_GPD11_VD19 (0x02 << 22)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 57759804e2f..7f7c5294796 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -73,6 +73,16 @@
#define S3C2410_BWSCON_WS7 (1<<30)
#define S3C2410_BWSCON_ST7 (1<<31)
+/* accesor functions for getting BANK(n) configuration. (n != 0) */
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_DW8 (0)
+#define S3C2410_BWSCON_DW16 (1)
+#define S3C2410_BWSCON_DW32 (2)
+#define S3C2410_BWSCON_WS (1 << 2)
+#define S3C2410_BWSCON_ST (1 << 3)
+
/* memory set (rom, ram) */
#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004)
#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index a4bf2712317..fb635251509 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -14,9 +14,11 @@
#ifndef __ASM_ARM_REGS_S3C2412_MEM
#define __ASM_ARM_REGS_S3C2412_MEM
-#ifndef S3C2412_MEMREG
#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
#define S3C2412_BANKCFG S3C2412_MEMREG(0x00)
#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04)
@@ -26,4 +28,21 @@
#define S3C2412_REFRESH S3C2412_MEMREG(0x10)
#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14)
+/* EBI control registers */
+
+#define S3C2412_EBI_PR S3C2412_EBIREG(0x00)
+#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x04)
+
+/* SSMC control registers */
+
+#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMIDCYR(x) S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMBWSTRD(x) S3C2412_SSMC(x, 0x04)
+#define S3C2412_SMBWSTWRR(x) S3C2412_SSMC(x, 0x08)
+#define S3C2412_SMBWSTOENR(x) S3C2412_SSMC(x, 0x0C)
+#define S3C2412_SMBWSTWENR(x) S3C2412_SSMC(x, 0x10)
+#define S3C2412_SMBCR(x) S3C2412_SSMC(x, 0x14)
+#define S3C2412_SMBSR(x) S3C2412_SSMC(x, 0x18)
+#define S3C2412_SMBWSTBRDR(x) S3C2412_SSMC(x, 0x1C)
+
#endif /* __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 1d300fb112b..193b39d654e 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -30,4 +30,7 @@ extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
int enable);
+extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+ int enable);
+
#endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 92150399563..5e2f3533205 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -39,9 +39,22 @@ static struct sysdev_driver s3c2410_irq_driver = {
.resume = s3c24xx_irq_resume,
};
-static int s3c2410_irq_init(void)
+static int __init s3c2410_irq_init(void)
{
return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
}
arch_initcall(s3c2410_irq_init);
+
+static struct sysdev_driver s3c2410a_irq_driver = {
+ .add = s3c2410_irq_add,
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
+
+static int __init s3c2410a_irq_init(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
+}
+
+arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2cd7..647c9adb018 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -45,6 +45,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
+#include <plat/hwmon.h>
#include <plat/nand.h>
#include <plat/iic.h>
#include <mach/fb.h>
@@ -59,6 +60,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/cpu-freq.h>
#include "usb-simtec.h"
#include "nor-simtec.h"
@@ -547,7 +549,35 @@ static struct i2c_board_info bast_i2c_devs[] __initdata = {
},
};
+static struct s3c_hwmon_pdata bast_hwmon_info = {
+ /* LCD contrast (0-6.6V) */
+ .in[0] = &(struct s3c_hwmon_chcfg) {
+ .name = "lcd-contrast",
+ .mult = 3300,
+ .div = 512,
+ },
+ /* LED current feedback */
+ .in[1] = &(struct s3c_hwmon_chcfg) {
+ .name = "led-feedback",
+ .mult = 3300,
+ .div = 1024,
+ },
+ /* LCD feedback (0-6.6V) */
+ .in[2] = &(struct s3c_hwmon_chcfg) {
+ .name = "lcd-feedback",
+ .mult = 3300,
+ .div = 512,
+ },
+ /* Vcore (1.8-2.0V), Vref 3.3V */
+ .in[3] = &(struct s3c_hwmon_chcfg) {
+ .name = "vcore",
+ .mult = 3300,
+ .div = 1024,
+ },
+};
+
/* Standard BAST devices */
+// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
static struct platform_device *bast_devices[] __initdata = {
&s3c_device_usb,
@@ -556,6 +586,8 @@ static struct platform_device *bast_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_nand,
+ &s3c_device_adc,
+ &s3c_device_hwmon,
&bast_device_dm9k,
&bast_device_asix,
&bast_device_axpp,
@@ -570,6 +602,12 @@ static struct clk *bast_clocks[] __initdata = {
&s3c24xx_uclk,
};
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+ .refresh = 7800, /* 7.8usec */
+ .auto_io = 1,
+ .need_io = 1,
+};
+
static void __init bast_map_io(void)
{
/* initialise the clocks */
@@ -588,6 +626,7 @@ static void __init bast_map_io(void)
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
s3c_device_nand.dev.platform_data = &bast_nand_info;
+ s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
@@ -608,6 +647,8 @@ static void __init bast_init(void)
usb_simtec_init();
nor_simtec_init();
+
+ s3c_cpufreq_setboard(&bast_cpufreq);
}
MACHINE_START(BAST, "Simtec-BAST")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
new file mode 100644
index 00000000000..f178c2fd9d8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -0,0 +1,95 @@
+/* arch/arm/mach-s3c2410/pll.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2410 CPU PLL tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+ { .frequency = 34000000, .index = PLLVAL(82, 2, 3), },
+ { .frequency = 45000000, .index = PLLVAL(82, 1, 3), },
+ { .frequency = 51000000, .index = PLLVAL(161, 3, 3), },
+ { .frequency = 48000000, .index = PLLVAL(120, 2, 3), },
+ { .frequency = 56000000, .index = PLLVAL(142, 2, 3), },
+ { .frequency = 68000000, .index = PLLVAL(82, 2, 2), },
+ { .frequency = 79000000, .index = PLLVAL(71, 1, 2), },
+ { .frequency = 85000000, .index = PLLVAL(105, 2, 2), },
+ { .frequency = 90000000, .index = PLLVAL(112, 2, 2), },
+ { .frequency = 101000000, .index = PLLVAL(127, 2, 2), },
+ { .frequency = 113000000, .index = PLLVAL(105, 1, 2), },
+ { .frequency = 118000000, .index = PLLVAL(150, 2, 2), },
+ { .frequency = 124000000, .index = PLLVAL(116, 1, 2), },
+ { .frequency = 135000000, .index = PLLVAL(82, 2, 1), },
+ { .frequency = 147000000, .index = PLLVAL(90, 2, 1), },
+ { .frequency = 152000000, .index = PLLVAL(68, 1, 1), },
+ { .frequency = 158000000, .index = PLLVAL(71, 1, 1), },
+ { .frequency = 170000000, .index = PLLVAL(77, 1, 1), },
+ { .frequency = 180000000, .index = PLLVAL(82, 1, 1), },
+ { .frequency = 186000000, .index = PLLVAL(85, 1, 1), },
+ { .frequency = 192000000, .index = PLLVAL(88, 1, 1), },
+ { .frequency = 203000000, .index = PLLVAL(161, 3, 1), },
+
+ /* 2410A extras */
+
+ { .frequency = 210000000, .index = PLLVAL(132, 2, 1), },
+ { .frequency = 226000000, .index = PLLVAL(105, 1, 1), },
+ { .frequency = 266000000, .index = PLLVAL(125, 1, 1), },
+ { .frequency = 268000000, .index = PLLVAL(126, 1, 1), },
+ { .frequency = 270000000, .index = PLLVAL(127, 1, 1), },
+};
+
+static int s3c2410_plls_add(struct sys_device *dev)
+{
+ return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct sysdev_driver s3c2410_plls_drv = {
+ .add = s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+
+}
+
+arch_initcall(s3c2410_pll_init);
+
+static struct sysdev_driver s3c2410a_plls_drv = {
+ .add = s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+}
+
+arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 143e08a599d..966119c8efe 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -119,6 +119,18 @@ static int __init s3c2410_pm_drvinit(void)
}
arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2410a_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
#endif
#if defined(CONFIG_CPU_S3C2440)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index feb141b1f91..91ba42f688a 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -105,17 +105,33 @@ void __init_or_cpufreq s3c2410_setup_clocks(void)
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
+/* fake ARMCLK for use with cpufreq, etc. */
+
+static struct clk s3c2410_armclk = {
+ .name = "armclk",
+ .parent = &clk_f,
+ .id = -1,
+};
+
void __init s3c2410_init_clocks(int xtal)
{
s3c24xx_register_baseclocks(xtal);
s3c2410_setup_clocks();
s3c2410_baseclk_add();
+ s3c24xx_register_clock(&s3c2410_armclk);
}
struct sysdev_class s3c2410_sysclass = {
.name = "s3c2410-core",
};
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two sysdev_class with the same name.
+ */
+struct sysdev_class s3c2410a_sysclass = {
+ .name = "s3c2410a-core",
+};
+
static struct sys_device s3c2410_sysdev = {
.cls = &s3c2410_sysclass,
};
@@ -133,9 +149,22 @@ static int __init s3c2410_core_init(void)
core_initcall(s3c2410_core_init);
+static int __init s3c2410a_core_init(void)
+{
+ return sysdev_class_register(&s3c2410a_sysclass);
+}
+
+core_initcall(s3c2410a_core_init);
+
int __init s3c2410_init(void)
{
printk("S3C2410: Initialising architecture\n");
return sysdev_register(&s3c2410_sysdev);
}
+
+int __init s3c2410a_init(void)
+{
+ s3c2410_sysdev.cls = &s3c2410a_sysclass;
+ return s3c2410_init();
+}
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 63586ffd0ae..35c1bde89cf 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,6 +32,15 @@ config S3C2412_PM
help
Internal config node to apply S3C2412 power management
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
+config S3C2412_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+ select S3C2412_IOTIMING
+ default y
+ help
+ CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
menu "S3C2412 Machines"
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 20918d5dc6a..530ec46cbae 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2412) += clock.o
obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o
+obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
# Machine support
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
new file mode 100644
index 00000000000..eb3ea172133
--- /dev/null
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -0,0 +1,257 @@
+/* linux/arch/arm/mach-s3c2412/cpu-freq.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned int hdiv, pdiv, armdiv, dvs;
+ unsigned long hclk, fclk, armclk, armdiv_clk;
+ unsigned long hclk_max;
+
+ fclk = cfg->freq.fclk;
+ armclk = cfg->freq.armclk;
+ hclk_max = cfg->max.hclk;
+
+ /* We can't run hclk above armclk as at the best we have to
+ * have armclk and hclk in dvs mode. */
+
+ if (hclk_max > armclk)
+ hclk_max = armclk;
+
+ s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+ __func__, fclk, armclk, hclk_max);
+ s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+ __func__, cfg->freq.fclk, cfg->freq.armclk,
+ cfg->freq.hclk, cfg->freq.pclk);
+
+ armdiv = fclk / armclk;
+
+ if (armdiv < 1)
+ armdiv = 1;
+ if (armdiv > 2)
+ armdiv = 2;
+
+ cfg->divs.arm_divisor = armdiv;
+ armdiv_clk = fclk / armdiv;
+
+ hdiv = armdiv_clk / hclk_max;
+ if (hdiv < 1)
+ hdiv = 1;
+
+ cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+ /* set dvs depending on whether we reached armclk or not. */
+ cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+ /* update the actual armclk we achieved. */
+ cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+ s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+ __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+ if (hdiv > 4)
+ goto invalid;
+
+ pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+ if ((hclk / pdiv) > cfg->max.pclk)
+ pdiv++;
+
+ cfg->freq.pclk = hclk / pdiv;
+
+ s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+ if (pdiv > 2)
+ goto invalid;
+
+ pdiv *= hdiv;
+
+ /* store the result, and then return */
+
+ cfg->divs.h_divisor = hdiv * armdiv;
+ cfg->divs.p_divisor = pdiv * armdiv;
+
+ return 0;
+
+ invalid:
+ return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long clkdiv;
+ unsigned long olddiv;
+
+ olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+ /* clear off current clock info */
+
+ clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+ clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+ clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+ if (cfg->divs.arm_divisor == 2)
+ clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+ clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+ if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+ clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+ s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ unsigned long refresh;
+
+ s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+ board->refresh, cfg->freq.hclk);
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * by 10 each to ensure that we do not overflow 32 bit numbers. This
+ * should work for HCLK up to 133MHz and refresh period up to 30usec.
+ */
+
+ refresh = (board->refresh / 10);
+ refresh *= (cfg->freq.hclk / 100);
+ refresh /= (1 * 1000 * 1000); /* 10^6 */
+
+ s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+ __raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+ .max = {
+ .fclk = 200000000,
+ .hclk = 100000000,
+ .pclk = 50000000,
+ },
+
+ .latency = 5000000, /* 5ms */
+
+ .locktime_m = 150,
+ .locktime_u = 150,
+ .locktime_bits = 16,
+
+ .name = "s3c2412",
+ .set_refresh = s3c2412_cpufreq_setrefresh,
+ .set_divs = s3c2412_cpufreq_setdivs,
+ .calc_divs = s3c2412_cpufreq_calcdivs,
+
+ .calc_iotiming = s3c2412_iotiming_calc,
+ .set_iotiming = s3c2412_iotiming_set,
+ .get_iotiming = s3c2412_iotiming_get,
+
+ .resume_clocks = s3c2412_setup_clocks,
+
+ .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
+};
+
+static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+{
+ unsigned long fclk_rate;
+
+ hclk = clk_get(NULL, "hclk");
+ if (IS_ERR(hclk)) {
+ printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+ return -ENOENT;
+ }
+
+ fclk = clk_get(NULL, "fclk");
+ if (IS_ERR(fclk)) {
+ printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+ goto err_fclk;
+ }
+
+ fclk_rate = clk_get_rate(fclk);
+ if (fclk_rate > 200000000) {
+ printk(KERN_INFO
+ "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+ __func__, fclk_rate / 1000000);
+ s3c2412_cpufreq_info.max.fclk = 266000000;
+ s3c2412_cpufreq_info.max.hclk = 133000000;
+ s3c2412_cpufreq_info.max.pclk = 66000000;
+ }
+
+ armclk = clk_get(NULL, "armclk");
+ if (IS_ERR(armclk)) {
+ printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+ goto err_armclk;
+ }
+
+ xtal = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal)) {
+ printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+ goto err_xtal;
+ }
+
+ return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+ clk_put(armclk);
+err_armclk:
+ clk_put(fclk);
+err_fclk:
+ clk_put(hclk);
+
+ return -ENOENT;
+}
+
+static struct sysdev_driver s3c2412_cpufreq_driver = {
+ .add = s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2412_sysclass,
+ &s3c2412_cpufreq_driver);
+}
+
+arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5b5aba69ec3..bef39f77729 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -69,6 +69,18 @@ static struct map_desc s3c2412_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
IODESC_ENT(WATCHDOG),
+ {
+ .virtual = (unsigned long)S3C2412_VA_SSMC,
+ .pfn = __phys_to_pfn(S3C2412_PA_SSMC),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)S3C2412_VA_EBI,
+ .pfn = __phys_to_pfn(S3C2412_PA_EBI),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
};
/* uart registration process */
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8cfeaec3730..8ae1b288f7f 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
+ select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
@@ -44,6 +45,8 @@ config MACH_OSIRIS
select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
+ select S3C2440_XTAL_12000000
+ select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec IM2440D20 module, also
@@ -52,6 +55,7 @@ config MACH_OSIRIS
config MACH_RX3715
bool "HP iPAQ rx3715"
select CPU_S3C2440
+ select S3C2440_XTAL_16934400
select PM_H1940 if PM
help
Say Y here if you are using the HP iPAQ rx3715.
@@ -59,6 +63,7 @@ config MACH_RX3715
config ARCH_S3C2440
bool "SMDK2440"
select CPU_S3C2440
+ select S3C2440_XTAL_16934400
select MACH_SMDK
select S3C_DEV_USB_HOST
help
@@ -67,6 +72,7 @@ config ARCH_S3C2440
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select CPU_S3C2440
+ select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@@ -75,6 +81,7 @@ config SMDK2440_CPU2440
bool "SMDK2440 with S3C2440 CPU module"
depends on ARCH_S3C2440
default y if ARCH_S3C2440
+ select S3C2440_XTAL_16934400
select CPU_S3C2440
config MACH_AT2440EVB
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index cba064b49a6..2105a41281a 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -34,6 +34,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
+#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
@@ -351,6 +352,12 @@ static struct clk *osiris_clocks[] __initdata = {
&s3c24xx_uclk,
};
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+ .refresh = 7800, /* refresh period is 7.8usec */
+ .auto_io = 1,
+ .need_io = 1,
+};
+
static void __init osiris_map_io(void)
{
unsigned long flags;
@@ -402,6 +409,8 @@ static void __init osiris_init(void)
s3c_i2c0_set_platdata(NULL);
+ s3c_cpufreq_setboard(&osiris_cpufreq);
+
i2c_register_board_info(0, osiris_i2c_devs,
ARRAY_SIZE(osiris_i2c_devs));
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index a01132717e3..79e4d93ea2b 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -81,5 +81,6 @@
#define S3C_PA_UART S3C24A0_PA_UART
#define S3C_PA_IIC S3C24A0_PA_IIC
+#define S3C_PA_NAND S3C24XX_PA_NAND
#endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..fc8b223bad4 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -38,18 +38,21 @@
#define S3C_VA_UART2 S3C_VA_UARTx(2)
#define S3C_VA_UART3 S3C_VA_UARTx(3)
+#define S3C64XX_PA_NAND (0x70200000)
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_USB_HSOTG (0x7C000000)
#define S3C64XX_PA_WATCHDOG (0x7E004000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
+#define S3C64XX_PA_AC97 (0x7F001000)
#define S3C64XX_PA_IIS0 (0x7F002000)
#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
+#define S3C64XX_PA_IISV4 (0x7F00D000)
#define S3C64XX_PA_IIC1 (0x7F00F000)
#define S3C64XX_PA_GPIO (0x7F008000)
-#define S3C64XX_VA_GPIO S3C_ADDR(0x00500000)
+#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
@@ -57,7 +60,7 @@
#define S3C64XX_PA_VIC1 (0x71300000)
#define S3C64XX_PA_MODEM (0x74108000)
-#define S3C64XX_VA_MODEM S3C_ADDR(0x00600000)
+#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
#define S3C64XX_PA_USBHOST (0x74300000)
@@ -72,6 +75,7 @@
#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2
#define S3C_PA_IIC S3C64XX_PA_IIC0
#define S3C_PA_IIC1 S3C64XX_PA_IIC1
+#define S3C_PA_NAND S3C64XX_PA_NAND
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index 1ece887d90b..b42bdd0f213 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -48,6 +48,8 @@ void __init s3c6400_map_io(void)
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
+
+ s3c_device_nand.name = "s3c6400-nand";
}
void __init s3c6400_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index e63aac7f4e5..f9d0f09f976 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -97,3 +97,13 @@ config MACH_NCP
select S3C64XX_SETUP_I2C1
help
Machine support for the Samsung NCP
+
+config MACH_HMT
+ bool "Airgoo HMT"
+ select CPU_S3C6410
+ select S3C_DEV_FB
+ select S3C_DEV_USB_HOST
+ select S3C64XX_SETUP_FB_24BPP
+ select HAVE_PWM
+ help
+ Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 6f9deac8861..3e48c3dbf97 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -23,5 +23,4 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-
-
+obj-$(CONFIG_MACH_HMT) += mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index ade904de889..9b67c663d9d 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -62,6 +62,8 @@ void __init s3c6410_map_io(void)
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
+
+ s3c_device_nand.name = "s3c6400-nand";
}
void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
new file mode 100644
index 00000000000..c5741056193
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -0,0 +1,276 @@
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+ if (!ret)
+ ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+ return ret;
+}
+
+static int hmt_bl_notify(int brightness)
+{
+ /*
+ * translate from CIELUV/CIELAB L*->brightness, E.G. from
+ * perceived luminance to light output. Assumes range 0..25600
+ */
+ if (brightness < 0x800) {
+ /* Y = Yn * L / 903.3 */
+ brightness = (100*256 * brightness + 231245/2) / 231245;
+ } else {
+ /* Y = Yn * ((L + 16) / 116 )^3 */
+ int t = (brightness*4 + 16*1024 + 58)/116;
+ brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+ }
+
+ gpio_set_value(S3C64XX_GPB(4), brightness);
+
+ return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+ gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = 100 * 256,
+ .dft_brightness = 40 * 256,
+ .pwm_period_ns = 1000000000 / (100 * 256 * 20),
+ .init = hmt_bl_init,
+ .notify = hmt_bl_notify,
+ .exit = hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &s3c_device_timer[1].dev,
+ .platform_data = &hmt_backlight_data,
+ },
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+ .win_mode = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &hmt_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+ [0] = {
+ .name = "uboot",
+ .size = SZ_512K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "uboot-env1",
+ .size = SZ_256K,
+ .offset = SZ_512K,
+ },
+ [2] = {
+ .name = "uboot-env2",
+ .size = SZ_256K,
+ .offset = SZ_512K + SZ_256K,
+ },
+ [3] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [4] = {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M + SZ_2M,
+ },
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(hmt_nand_part),
+ .partitions = hmt_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(hmt_nand_sets),
+ .sets = hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+ { /* left function keys */
+ .name = "left:blue",
+ .gpio = S3C64XX_GPO(12),
+ .default_trigger = "default-on",
+ },
+ { /* right function keys - red */
+ .name = "right:red",
+ .gpio = S3C64XX_GPO(13),
+ },
+ { /* right function keys - green */
+ .name = "right:green",
+ .gpio = S3C64XX_GPO(14),
+ },
+ { /* right function keys - blue */
+ .name = "right:blue",
+ .gpio = S3C64XX_GPO(15),
+ .default_trigger = "default-on",
+ },
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+ .num_leds = ARRAY_SIZE(hmt_leds),
+ .leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+ &s3c_device_i2c0,
+ &s3c_device_nand,
+ &s3c_device_fb,
+ &s3c_device_usb,
+ &s3c_device_timer[1],
+ &hmt_backlight_device,
+ &hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+ s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_fb_set_platdata(&hmt_lcd_pdata);
+ s3c_device_nand.dev.platform_data = &hmt_nand_info;
+
+ gpio_request(S3C64XX_GPC(7), "usb power");
+ gpio_direction_output(S3C64XX_GPC(7), 0);
+ gpio_request(S3C64XX_GPM(0), "usb power");
+ gpio_direction_output(S3C64XX_GPM(0), 1);
+ gpio_request(S3C64XX_GPK(7), "usb power");
+ gpio_direction_output(S3C64XX_GPK(7), 1);
+ gpio_request(S3C64XX_GPF(13), "usb power");
+ gpio_direction_output(S3C64XX_GPF(13), 1);
+
+ platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+ /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = hmt_map_io,
+ .init_machine = hmt_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
index 6030636f854..55e9bbfaf68 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -79,7 +79,7 @@ static struct platform_device *ncp_devices[] __initdata = {
&s3c_device_i2c0,
};
-struct map_desc ncp_iodesc[] = {};
+static struct map_desc ncp_iodesc[] __initdata = {};
static void __init ncp_map_io(void)
{
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index bc9a7dea567..ea51dbe76e3 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -65,16 +65,30 @@ static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
};
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
new file mode 100644
index 00000000000..b1a4ba50441
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -0,0 +1,22 @@
+# arch/arm/mach-s5pc100/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+# Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PC100 CPU
+
+config CPU_S5PC100
+ bool
+ select CPU_S5PC100_INIT
+ select CPU_S5PC100_CLOCK
+ help
+ Enable S5PC100 CPU support
+
+config MACH_SMDKC100
+ bool "SMDKC100"
+ select CPU_S5PC100
+ select S5PC1XX_SETUP_I2C1
+ help
+ Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
new file mode 100644
index 00000000000..afc89b381d7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -0,0 +1,17 @@
+# arch/arm/mach-s5pc100/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for S5PC100 system
+
+obj-$(CONFIG_CPU_S5PC100) += cpu.o
+
+# machine support
+obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
new file mode 100644
index 00000000000..ff90aa13bd6
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x20008000
+params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
new file mode 100644
index 00000000000..0e718890da3
--- /dev/null
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/mach-s5pc100/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6410/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s5pc100.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+};
+
+/* s5pc100_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pc100_map_io(void)
+{
+ iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+
+ /* initialise device information early */
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+ s3c24xx_register_baseclocks(xtal);
+ s5pc1xx_register_clocks();
+ s5pc100_register_clocks();
+ s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+ u32 vic_valid[] = {~0, ~0, ~0};
+
+ /* VIC0, VIC1, and VIC2 are fully populated. */
+ s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+}
+
+struct sysdev_class s5pc100_sysclass = {
+ .name = "s5pc100-core",
+};
+
+static struct sys_device s5pc100_sysdev = {
+ .cls = &s5pc100_sysclass,
+};
+
+static int __init s5pc100_core_init(void)
+{
+ return sysdev_class_register(&s5pc100_sysclass);
+}
+
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+ printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+
+ return sysdev_register(&s5pc100_sysdev);
+}
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
new file mode 100644
index 00000000000..9d142ccf654
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S3C_PA_UART
+ ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ .endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
new file mode 100644
index 00000000000..67131939e62
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -0,0 +1,50 @@
+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =S3C_VA_VIC0
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ @ check the vic0
+ mov \irqnr, # S3C_IRQ_OFFSET + 31
+ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
+ teq \irqstat, #0
+
+ @ otherwise try vic1
+ addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ @ otherwise try vic2
+ addeq \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
new file mode 100644
index 00000000000..ad28d8ec8a7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO core support
+ *
+ * Based on mach-s3c6400/include/mach/gpio-core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
new file mode 100644
index 00000000000..c74fc93d7d1
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO lib support
+ *
+ * Base on mach-s3c6400/include/mach/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PC1XX_GPIO_A0_NR (8)
+#define S5PC1XX_GPIO_A1_NR (5)
+#define S5PC1XX_GPIO_B_NR (8)
+#define S5PC1XX_GPIO_C_NR (5)
+#define S5PC1XX_GPIO_D_NR (7)
+#define S5PC1XX_GPIO_E0_NR (8)
+#define S5PC1XX_GPIO_E1_NR (6)
+#define S5PC1XX_GPIO_F0_NR (8)
+#define S5PC1XX_GPIO_F1_NR (8)
+#define S5PC1XX_GPIO_F2_NR (8)
+#define S5PC1XX_GPIO_F3_NR (4)
+#define S5PC1XX_GPIO_G0_NR (8)
+#define S5PC1XX_GPIO_G1_NR (3)
+#define S5PC1XX_GPIO_G2_NR (7)
+#define S5PC1XX_GPIO_G3_NR (7)
+#define S5PC1XX_GPIO_H0_NR (8)
+#define S5PC1XX_GPIO_H1_NR (8)
+#define S5PC1XX_GPIO_H2_NR (8)
+#define S5PC1XX_GPIO_H3_NR (8)
+#define S5PC1XX_GPIO_I_NR (8)
+#define S5PC1XX_GPIO_J0_NR (8)
+#define S5PC1XX_GPIO_J1_NR (5)
+#define S5PC1XX_GPIO_J2_NR (8)
+#define S5PC1XX_GPIO_J3_NR (8)
+#define S5PC1XX_GPIO_J4_NR (4)
+#define S5PC1XX_GPIO_K0_NR (8)
+#define S5PC1XX_GPIO_K1_NR (6)
+#define S5PC1XX_GPIO_K2_NR (8)
+#define S5PC1XX_GPIO_K3_NR (8)
+#define S5PC1XX_GPIO_MP00_NR (8)
+#define S5PC1XX_GPIO_MP01_NR (8)
+#define S5PC1XX_GPIO_MP02_NR (8)
+#define S5PC1XX_GPIO_MP03_NR (8)
+#define S5PC1XX_GPIO_MP04_NR (5)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PC1XX_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+ S5PC1XX_GPIO_A0_START = 0,
+ S5PC1XX_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
+ S5PC1XX_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
+ S5PC1XX_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
+ S5PC1XX_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
+ S5PC1XX_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
+ S5PC1XX_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
+ S5PC1XX_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
+ S5PC1XX_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
+ S5PC1XX_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
+ S5PC1XX_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
+ S5PC1XX_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
+ S5PC1XX_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
+ S5PC1XX_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
+ S5PC1XX_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
+ S5PC1XX_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
+ S5PC1XX_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
+ S5PC1XX_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
+ S5PC1XX_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
+ S5PC1XX_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
+ S5PC1XX_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
+ S5PC1XX_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
+ S5PC1XX_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
+ S5PC1XX_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
+ S5PC1XX_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
+ S5PC1XX_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
+ S5PC1XX_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
+ S5PC1XX_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
+ S5PC1XX_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
+ S5PC1XX_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
+ S5PC1XX_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
+ S5PC1XX_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
+ S5PC1XX_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
+ S5PC1XX_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+};
+
+/* S5PC1XX GPIO number definitions. */
+#define S5PC1XX_GPA0(_nr) (S5PC1XX_GPIO_A0_START + (_nr))
+#define S5PC1XX_GPA1(_nr) (S5PC1XX_GPIO_A1_START + (_nr))
+#define S5PC1XX_GPB(_nr) (S5PC1XX_GPIO_B_START + (_nr))
+#define S5PC1XX_GPC(_nr) (S5PC1XX_GPIO_C_START + (_nr))
+#define S5PC1XX_GPD(_nr) (S5PC1XX_GPIO_D_START + (_nr))
+#define S5PC1XX_GPE0(_nr) (S5PC1XX_GPIO_E0_START + (_nr))
+#define S5PC1XX_GPE1(_nr) (S5PC1XX_GPIO_E1_START + (_nr))
+#define S5PC1XX_GPF0(_nr) (S5PC1XX_GPIO_F0_START + (_nr))
+#define S5PC1XX_GPF1(_nr) (S5PC1XX_GPIO_F1_START + (_nr))
+#define S5PC1XX_GPF2(_nr) (S5PC1XX_GPIO_F2_START + (_nr))
+#define S5PC1XX_GPF3(_nr) (S5PC1XX_GPIO_F3_START + (_nr))
+#define S5PC1XX_GPG0(_nr) (S5PC1XX_GPIO_G0_START + (_nr))
+#define S5PC1XX_GPG1(_nr) (S5PC1XX_GPIO_G1_START + (_nr))
+#define S5PC1XX_GPG2(_nr) (S5PC1XX_GPIO_G2_START + (_nr))
+#define S5PC1XX_GPG3(_nr) (S5PC1XX_GPIO_G3_START + (_nr))
+#define S5PC1XX_GPH0(_nr) (S5PC1XX_GPIO_H0_START + (_nr))
+#define S5PC1XX_GPH1(_nr) (S5PC1XX_GPIO_H1_START + (_nr))
+#define S5PC1XX_GPH2(_nr) (S5PC1XX_GPIO_H2_START + (_nr))
+#define S5PC1XX_GPH3(_nr) (S5PC1XX_GPIO_H3_START + (_nr))
+#define S5PC1XX_GPI(_nr) (S5PC1XX_GPIO_I_START + (_nr))
+#define S5PC1XX_GPJ0(_nr) (S5PC1XX_GPIO_J0_START + (_nr))
+#define S5PC1XX_GPJ1(_nr) (S5PC1XX_GPIO_J1_START + (_nr))
+#define S5PC1XX_GPJ2(_nr) (S5PC1XX_GPIO_J2_START + (_nr))
+#define S5PC1XX_GPJ3(_nr) (S5PC1XX_GPIO_J3_START + (_nr))
+#define S5PC1XX_GPJ4(_nr) (S5PC1XX_GPIO_J4_START + (_nr))
+#define S5PC1XX_GPK0(_nr) (S5PC1XX_GPIO_K0_START + (_nr))
+#define S5PC1XX_GPK1(_nr) (S5PC1XX_GPIO_K1_START + (_nr))
+#define S5PC1XX_GPK2(_nr) (S5PC1XX_GPIO_K2_START + (_nr))
+#define S5PC1XX_GPK3(_nr) (S5PC1XX_GPIO_K3_START + (_nr))
+#define S5PC1XX_MP00(_nr) (S5PC1XX_GPIO_MP00_START + (_nr))
+#define S5PC1XX_MP01(_nr) (S5PC1XX_GPIO_MP01_START + (_nr))
+#define S5PC1XX_MP02(_nr) (S5PC1XX_GPIO_MP02_START + (_nr))
+#define S5PC1XX_MP03(_nr) (S5PC1XX_GPIO_MP03_START + (_nr))
+#define S5PC1XX_MP04(_nr) (S5PC1XX_GPIO_MP04_START + (_nr))
+
+/* the end of the S5PC1XX specific gpios */
+#define S5PC1XX_GPIO_END (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define S3C_GPIO_END S5PC1XX_GPIO_END
+
+/* define the number of gpios we need to the one after the MP04() range */
+#define ARCH_NR_GPIOS (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
new file mode 100644
index 00000000000..6b38618c2fd
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
new file mode 100644
index 00000000000..622720dba28
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
new file mode 100644
index 00000000000..9e9f39130b2
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/map.h
+ *
+ * S5PC1XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+
+/* Chip ID */
+#define S5PC100_PA_CHIPID (0xE0000000)
+#define S5PC1XX_PA_CHIPID S5PC100_PA_CHIPID
+#define S5PC1XX_VA_CHIPID S3C_VA_SYS
+
+/* System */
+#define S5PC100_PA_SYS (0xE0100000)
+#define S5PC100_PA_CLK (S5PC100_PA_SYS + 0x0)
+#define S5PC100_PA_PWR (S5PC100_PA_SYS + 0x8000)
+#define S5PC1XX_PA_CLK S5PC100_PA_CLK
+#define S5PC1XX_PA_PWR S5PC100_PA_PWR
+#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000)
+#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000)
+
+/* Interrupt */
+#define S5PC100_PA_VIC (0xE4000000)
+#define S5PC100_VA_VIC S3C_VA_IRQ
+#define S5PC100_PA_VIC_OFFSET 0x100000
+#define S5PC100_VA_VIC_OFFSET 0x10000
+#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
+#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+
+/* Timer */
+#define S5PC100_PA_TIMER (0xEA000000)
+#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER
+#define S5PC1XX_VA_TIMER S3C_VA_TIMER
+
+/* UART */
+#define S5PC100_PA_UART (0xEC000000)
+#define S5PC1XX_PA_UART S5PC100_PA_UART
+#define S5PC1XX_VA_UART S3C_VA_UART
+
+/* IIC */
+#define S5PC100_PA_IIC (0xEC100000)
+
+/* ETC */
+#define S5PC100_PA_SDRAM (0x20000000)
+
+/* compatibility defines. */
+#define S3C_PA_UART S5PC100_PA_UART
+#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0)
+#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400)
+#define S3C_PA_UART2 (S5PC100_PA_UART + 0x800)
+#define S3C_PA_UART3 (S5PC100_PA_UART + 0xC00)
+#define S3C_VA_UART0 (S3C_VA_UART + 0x0)
+#define S3C_VA_UART1 (S3C_VA_UART + 0x400)
+#define S3C_VA_UART2 (S3C_VA_UART + 0x800)
+#define S3C_VA_UART3 (S3C_VA_UART + 0xC00)
+#define S3C_UART_OFFSET 0x400
+#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0)
+#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
+#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000)
+#define S3C_PA_IIC S5PC100_PA_IIC
+
+#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
new file mode 100644
index 00000000000..4b60d18179f
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/memory.h
+ *
+ * Copyright 2008 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x20000000)
+
+#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
new file mode 100644
index 00000000000..b34d2f7aae5
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - pwm clock and timer support
+ *
+ * Based on mach-s3c6400/include/mach/pwm-clock.h
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+ return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+ return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+ return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
new file mode 100644
index 00000000000..751ac15438c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* interrupt controller */
+#define S5PC1XX_VIC0REG(x) ((x) + S5PC1XX_VA_VIC(0))
+#define S5PC1XX_VIC1REG(x) ((x) + S5PC1XX_VA_VIC(1))
+#define S5PC1XX_VIC2REG(x) ((x) + S5PC1XX_VA_VIC(2))
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
new file mode 100644
index 00000000000..e3901437547
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/system.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - system implementation
+ *
+ * Based on mach-s3c6400/include/mach/system.h
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
new file mode 100644
index 00000000000..d3de0f3591a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * Based on mach-s3c6400/include/mach/tick.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+ u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+ return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h
new file mode 100644
index 00000000000..01ccf535e76
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+ fifo_mask = S3C2440_UFSTAT_TXMASK;
+ fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
new file mode 100644
index 00000000000..214093cd763
--- /dev/null
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Author: Byungho Min <bhmin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/s5pc100.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+static struct map_desc smdkc100_iodesc[] = {};
+
+static struct platform_device *smdkc100_devices[] __initdata = {
+};
+
+static void __init smdkc100_map_io(void)
+{
+ s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+}
+
+static void __init smdkc100_machine_init(void)
+{
+ platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+}
+
+MACHINE_START(SMDKC100, "SMDKC100")
+ /* Maintainer: Byungho Min <bhmin@samsung.com> */
+ .phys_io = S5PC1XX_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5PC100_PA_SDRAM + 0x100,
+
+ .init_irq = s5pc100_init_irq,
+ .map_io = smdkc100_map_io,
+ .init_machine = smdkc100_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 3138d3955c9..585cc013639 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -156,6 +156,8 @@ int __devinit mmc_init(struct amba_device *adev)
mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
mmci_card->mmc0_plat_data.status = mmc_status;
+ mmci_card->mmc0_plat_data.gpio_wp = -1;
+ mmci_card->mmc0_plat_data.gpio_cd = -1;
mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 31093af7d05..975eae41ee6 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -26,6 +26,7 @@
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/amba/pl061.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/cnt32_to_63.h>
@@ -371,6 +372,8 @@ unsigned int mmc_status(struct device *dev)
static struct mmc_platform_data mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
+ .gpio_wp = -1,
+ .gpio_cd = -1,
};
/*
@@ -705,6 +708,16 @@ static struct clcd_board clcd_plat_data = {
.remove = versatile_clcd_remove,
};
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = IRQ_GPIO0_START,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = IRQ_GPIO1_START,
+};
+
#define AACI_IRQ { IRQ_AACI, NO_IRQ }
#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -767,8 +780,8 @@ AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
index 9bfdb30e1f3..bf44c61bd1f 100644
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -122,4 +122,13 @@
#define IRQ_SIC_PCI3 (IRQ_SIC_START + SIC_INT_PCI3)
#define IRQ_SIC_END 63
-#define NR_IRQS 64
+#define IRQ_GPIO0_START (IRQ_SIC_END + 1)
+#define IRQ_GPIO0_END (IRQ_GPIO0_START + 31)
+#define IRQ_GPIO1_START (IRQ_GPIO0_END + 1)
+#define IRQ_GPIO1_END (IRQ_GPIO1_START + 31)
+#define IRQ_GPIO2_START (IRQ_GPIO1_END + 1)
+#define IRQ_GPIO2_END (IRQ_GPIO2_START + 31)
+#define IRQ_GPIO3_START (IRQ_GPIO2_END + 1)
+#define IRQ_GPIO3_END (IRQ_GPIO3_START + 31)
+
+#define NR_IRQS (IRQ_GPIO3_END + 1)
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index aa051c0884f..9af8d8154df 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -23,6 +23,7 @@
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -43,6 +44,18 @@
static struct mmc_platform_data mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
+ .gpio_wp = -1,
+ .gpio_cd = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = IRQ_GPIO2_START,
+};
+
+static struct pl061_platform_data gpio3_plat_data = {
+ .gpio_base = 24,
+ .irq_base = IRQ_GPIO3_START,
};
#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ }
@@ -70,8 +83,8 @@ AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL);
AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
/* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
-AMBA_DEVICE(gpio3, "dev:e7", GPIO3, NULL);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart3_device,
diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 8e4178fe5ec..69bab32a8bc 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -5,6 +5,16 @@ config CPU_W90P910
help
Support for W90P910 of Nuvoton W90X900 CPUs.
+config CPU_NUC950
+ bool
+ help
+ Support for NUCP950 of Nuvoton NUC900 CPUs.
+
+config CPU_NUC960
+ bool
+ help
+ Support for NUCP960 of Nuvoton NUC900 CPUs.
+
menu "W90P910 Machines"
config MACH_W90P910EVB
@@ -16,4 +26,24 @@ config MACH_W90P910EVB
endmenu
+menu "NUC950 Machines"
+
+config MACH_W90P950EVB
+ bool "Nuvoton NUC950 Evaluation Board"
+ select CPU_NUC950
+ help
+ Say Y here if you are using the Nuvoton NUC950EVB
+
+endmenu
+
+menu "NUC960 Machines"
+
+config MACH_W90N960EVB
+ bool "Nuvoton NUC960 Evaluation Board"
+ select CPU_NUC960
+ help
+ Say Y here if you are using the Nuvoton NUC960EVB
+
+endmenu
+
endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index d50c94f4dbd..828c0326441 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,12 +4,16 @@
# Object file lists.
-obj-y := irq.o time.o mfp-w90p910.o gpio.o clock.o
-
+obj-y := irq.o time.o mfp.o gpio.o clock.o
+obj-y += clksel.o dev.o cpu.o
# W90X900 CPU support files
-obj-$(CONFIG_CPU_W90P910) += w90p910.o
+obj-$(CONFIG_CPU_W90P910) += nuc910.o
+obj-$(CONFIG_CPU_NUC950) += nuc950.o
+obj-$(CONFIG_CPU_NUC960) += nuc960.o
# machine support
-obj-$(CONFIG_MACH_W90P910EVB) += mach-w90p910evb.o
+obj-$(CONFIG_MACH_W90P910EVB) += mach-nuc910evb.o
+obj-$(CONFIG_MACH_W90P950EVB) += mach-nuc950evb.o
+obj-$(CONFIG_MACH_W90N960EVB) += mach-nuc960evb.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
new file mode 100644
index 00000000000..3de4a5211c3
--- /dev/null
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/arm/mach-w90x900/clksel.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+#define PLL0 0x00
+#define PLL1 0x01
+#define OTHER 0x02
+#define EXT 0x03
+#define MSOFFSET 0x0C
+#define ATAOFFSET 0x0a
+#define LCDOFFSET 0x06
+#define AUDOFFSET 0x04
+#define CPUOFFSET 0x00
+
+static DEFINE_MUTEX(clksel_sem);
+
+static void clock_source_select(const char *dev_id, unsigned int clkval)
+{
+ unsigned int clksel, offset;
+
+ clksel = __raw_readl(REG_CLKSEL);
+
+ if (strcmp(dev_id, "nuc900-ms") == 0)
+ offset = MSOFFSET;
+ else if (strcmp(dev_id, "nuc900-atapi") == 0)
+ offset = ATAOFFSET;
+ else if (strcmp(dev_id, "nuc900-lcd") == 0)
+ offset = LCDOFFSET;
+ else if (strcmp(dev_id, "nuc900-audio") == 0)
+ offset = AUDOFFSET;
+ else
+ offset = CPUOFFSET;
+
+ clksel &= ~(0x03 << offset);
+ clksel |= (clkval << offset);
+
+ __raw_writel(clksel, REG_CLKSEL);
+}
+
+void nuc900_clock_source(struct device *dev, unsigned char *src)
+{
+ unsigned int clkval;
+ const char *dev_id;
+
+ BUG_ON(!src);
+ clkval = 0;
+
+ mutex_lock(&clksel_sem);
+
+ if (dev)
+ dev_id = dev_name(dev);
+ else
+ dev_id = "cpufreq";
+
+ if (strcmp(src, "pll0") == 0)
+ clkval = PLL0;
+ else if (strcmp(src, "pll1") == 0)
+ clkval = PLL1;
+ else if (strcmp(src, "ext") == 0)
+ clkval = EXT;
+ else if (strcmp(src, "oth") == 0)
+ clkval = OTHER;
+
+ clock_source_select(dev_id, clkval);
+
+ mutex_unlock(&clksel_sem);
+}
+EXPORT_SYMBOL(nuc900_clock_source);
+
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index f420613cd39..b785994bab0 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -25,6 +25,8 @@
#include "clock.h"
+#define SUBCLK 0x24
+
static DEFINE_SPINLOCK(clocks_lock);
int clk_enable(struct clk *clk)
@@ -53,7 +55,13 @@ void clk_disable(struct clk *clk)
}
EXPORT_SYMBOL(clk_disable);
-void w90x900_clk_enable(struct clk *clk, int enable)
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return 15000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void nuc900_clk_enable(struct clk *clk, int enable)
{
unsigned int clocks = clk->cken;
unsigned long clken;
@@ -68,6 +76,22 @@ void w90x900_clk_enable(struct clk *clk, int enable)
__raw_writel(clken, W90X900_VA_CLKPWR);
}
+void nuc900_subclk_enable(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->cken;
+ unsigned long clken;
+
+ clken = __raw_readl(W90X900_VA_CLKPWR + SUBCLK);
+
+ if (enable)
+ clken |= clocks;
+ else
+ clken &= ~clocks;
+
+ __raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
+}
+
+
void clks_register(struct clk_lookup *clks, size_t num)
{
int i;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index 4f27bda76d5..f5816a06eed 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -12,7 +12,8 @@
#include <asm/clkdev.h>
-void w90x900_clk_enable(struct clk *clk, int enable);
+void nuc900_clk_enable(struct clk *clk, int enable);
+void nuc900_subclk_enable(struct clk *clk, int enable);
void clks_register(struct clk_lookup *clks, size_t num);
struct clk {
@@ -23,10 +24,17 @@ struct clk {
#define DEFINE_CLK(_name, _ctrlbit) \
struct clk clk_##_name = { \
- .enable = w90x900_clk_enable, \
+ .enable = nuc900_clk_enable, \
.cken = (1 << _ctrlbit), \
}
+#define DEFINE_SUBCLK(_name, _ctrlbit) \
+struct clk clk_##_name = { \
+ .enable = nuc900_subclk_enable, \
+ .cken = (1 << _ctrlbit), \
+ }
+
+
#define DEF_CLKLOOK(_clk, _devname, _conname) \
{ \
.clk = _clk, \
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
new file mode 100644
index 00000000000..921cef991bf
--- /dev/null
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -0,0 +1,212 @@
+/*
+ * linux/arch/arm/mach-w90x900/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC900 series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc900_iodesc[] __initdata = {
+ IODESC_ENT(IRQ),
+ IODESC_ENT(GCR),
+ IODESC_ENT(UART),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(EBI),
+};
+
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_SUBCLK(ms, 0);
+static DEFINE_SUBCLK(sd, 1);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_SUBCLK(rmii, 2);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc900_clkregs[] = {
+ DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
+ DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL),
+ DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
+ DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
+ DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
+ DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
+ DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
+ DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
+ DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
+ DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
+ DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
+ DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
+ DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
+ DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
+ DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
+ DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
+ DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
+ DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+ DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
+ DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc900_uart_data[] = {
+ NUC900_8250PORT(UART0),
+};
+
+struct platform_device nuc900_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = nuc900_uart_data,
+ },
+};
+
+/*Set NUC900 series cpu frequence*/
+static int __init nuc900_set_clkval(unsigned int cpufreq)
+{
+ unsigned int pllclk, ahbclk, apbclk, val;
+
+ pllclk = 0;
+ ahbclk = 0;
+ apbclk = 0;
+
+ switch (cpufreq) {
+ case 66:
+ pllclk = PLL_66MHZ;
+ ahbclk = AHB_CPUCLK_1_1;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 100:
+ pllclk = PLL_100MHZ;
+ ahbclk = AHB_CPUCLK_1_1;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 120:
+ pllclk = PLL_120MHZ;
+ ahbclk = AHB_CPUCLK_1_2;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 166:
+ pllclk = PLL_166MHZ;
+ ahbclk = AHB_CPUCLK_1_2;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 200:
+ pllclk = PLL_200MHZ;
+ ahbclk = AHB_CPUCLK_1_2;
+ apbclk = APB_AHB_1_2;
+ break;
+ }
+
+ __raw_writel(pllclk, REG_PLLCON0);
+
+ val = __raw_readl(REG_CLKDIV);
+ val &= ~(0x03 << 24 | 0x03 << 26);
+ val |= (ahbclk << 24 | apbclk << 26);
+ __raw_writel(val, REG_CLKDIV);
+
+ return 0;
+}
+static int __init nuc900_set_cpufreq(char *str)
+{
+ unsigned long cpufreq, val;
+
+ if (!*str)
+ return 0;
+
+ strict_strtoul(str, 0, &cpufreq);
+
+ nuc900_clock_source(NULL, "ext");
+
+ nuc900_set_clkval(cpufreq);
+
+ mdelay(1);
+
+ val = __raw_readl(REG_CKSKEW);
+ val &= ~0xff;
+ val |= DEFAULTSKEW;
+ __raw_writel(val, REG_CKSKEW);
+
+ nuc900_clock_source(NULL, "pll0");
+
+ return 1;
+}
+
+__setup("cpufreq=", nuc900_set_cpufreq);
+
+/*Init NUC900 evb io*/
+
+void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ unsigned long idcode = 0x0;
+
+ iotable_init(mach_desc, mach_size);
+ iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
+
+ idcode = __raw_readl(NUC900PDID);
+ if (idcode == NUC910_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+ else if (idcode == NUC920_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
+ else if (idcode == NUC950_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
+ else if (idcode == NUC960_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
+}
+
+/*Init NUC900 clock*/
+
+void __init nuc900_init_clocks(void)
+{
+ clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
+}
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 57b5dbabeb4..4d58ba164e2 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -6,7 +6,7 @@
* Copyright (c) 2008 Nuvoton technology corporation
* All rights reserved.
*
- * Header file for W90X900 CPU support
+ * Header file for NUC900 CPU support
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -24,29 +24,7 @@
.type = MT_DEVICE, \
}
-/*Cpu identifier register*/
-
-#define W90X900PDID W90X900_VA_GCR
-#define W90P910_CPUID 0x02900910
-#define W90P920_CPUID 0x02900920
-#define W90P950_CPUID 0x02900950
-#define W90N960_CPUID 0x02900960
-
-struct w90x900_uartcfg;
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void w90x900_init_irq(void);
-extern void w90p910_init_io(struct map_desc *mach_desc, int size);
-extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(void);
-extern void w90p910_map_io(struct map_desc *mach_desc, int size);
-extern struct platform_device w90p910_serial_device;
-extern struct sys_timer w90x900_timer;
-
-#define W90X900_8250PORT(name) \
+#define NUC900_8250PORT(name) \
{ \
.membase = name##_BA, \
.mapbase = name##_PA, \
@@ -56,3 +34,26 @@ extern struct sys_timer w90x900_timer;
.iotype = UPIO_MEM, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
}
+
+/*Cpu identifier register*/
+
+#define NUC900PDID W90X900_VA_GCR
+#define NUC910_CPUID 0x02900910
+#define NUC920_CPUID 0x02900920
+#define NUC950_CPUID 0x02900950
+#define NUC960_CPUID 0x02900960
+
+/* extern file from cpu.c */
+
+extern void nuc900_clock_source(struct device *dev, unsigned char *src);
+extern void nuc900_init_clocks(void);
+extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc900_board_init(struct platform_device **device, int size);
+
+/* for either public between 910 and 920, or between 920 and 950 */
+
+extern struct platform_device nuc900_serial_device;
+extern struct platform_device nuc900_device_fmi;
+extern struct platform_device nuc900_device_kpi;
+extern struct platform_device nuc900_device_rtc;
+extern struct platform_device nuc900_device_ts;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
new file mode 100644
index 00000000000..2a6f98de48d
--- /dev/null
+++ b/arch/arm/mach-w90x900/dev.c
@@ -0,0 +1,389 @@
+/*
+ * linux/arch/arm/mach-w90x900/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#include "cpu.h"
+
+/*NUC900 evb norflash driver data */
+
+#define NUC900_FLASH_BASE 0xA0000000
+#define NUC900_FLASH_SIZE 0x400000
+#define SPIOFFSET 0x200
+#define SPIOREG_SIZE 0x100
+
+static struct mtd_partition nuc900_flash_partitions[] = {
+ {
+ .name = "NOR Partition 1 for kernel (960K)",
+ .size = 0xF0000,
+ .offset = 0x10000,
+ },
+ {
+ .name = "NOR Partition 2 for image (1M)",
+ .size = 0x100000,
+ .offset = 0x100000,
+ },
+ {
+ .name = "NOR Partition 3 for user (2M)",
+ .size = 0x200000,
+ .offset = 0x00200000,
+ }
+};
+
+static struct physmap_flash_data nuc900_flash_data = {
+ .width = 2,
+ .parts = nuc900_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nuc900_flash_partitions),
+};
+
+static struct resource nuc900_flash_resources[] = {
+ {
+ .start = NUC900_FLASH_BASE,
+ .end = NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nuc900_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nuc900_flash_data,
+ },
+ .resource = nuc900_flash_resources,
+ .num_resources = ARRAY_SIZE(nuc900_flash_resources),
+};
+
+/* USB EHCI Host Controller */
+
+static struct resource nuc900_usb_ehci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBEHCIHOST,
+ .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device nuc900_device_usb_ehci = {
+ .name = "nuc900-ehci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usb_ehci_resource),
+ .resource = nuc900_usb_ehci_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_usb_ehci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* USB OHCI Host Controller */
+
+static struct resource nuc900_usb_ohci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBOHCIHOST,
+ .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_usb_ohci = {
+ .name = "nuc900-ohci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usb_ohci_resource),
+ .resource = nuc900_usb_ohci_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_usb_ohci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* USB Device (Gadget)*/
+
+static struct resource nuc900_usbgadget_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBDEV,
+ .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBD,
+ .end = IRQ_USBD,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_usbgadget = {
+ .name = "nuc900-usbgadget",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usbgadget_resource),
+ .resource = nuc900_usbgadget_resource,
+};
+
+/* MAC device */
+
+static struct resource nuc900_emc_resource[] = {
+ [0] = {
+ .start = W90X900_PA_EMC,
+ .end = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EMCTX,
+ .end = IRQ_EMCTX,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_EMCRX,
+ .end = IRQ_EMCRX,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_emc = {
+ .name = "nuc900-emc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_emc_resource),
+ .resource = nuc900_emc_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_emc_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* SPI device */
+
+static struct resource nuc900_spi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_I2C + SPIOFFSET,
+ .end = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP,
+ .end = IRQ_SSP,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_spi = {
+ .name = "nuc900-spi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_spi_resource),
+ .resource = nuc900_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition nuc900_spi_flash_partitions[] = {
+ {
+ .name = "bootloader(spi)",
+ .size = 0x0100000,
+ .offset = 0,
+ },
+};
+
+static struct flash_platform_data nuc900_spi_flash_data = {
+ .name = "m25p80",
+ .parts = nuc900_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
+ .type = "w25x16",
+};
+
+static struct spi_board_info nuc900_spi_board_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &nuc900_spi_flash_data,
+ .mode = SPI_MODE_0,
+ },
+};
+
+/* WDT Device */
+
+static struct resource nuc900_wdt_resource[] = {
+ [0] = {
+ .start = W90X900_PA_TIMER,
+ .end = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_WDT,
+ .end = IRQ_WDT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_wdt = {
+ .name = "nuc900-wdt",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_wdt_resource),
+ .resource = nuc900_wdt_resource,
+};
+
+/*
+ * public device definition between 910 and 920, or 910
+ * and 950 or 950 and 960...,their dev platform register
+ * should be in specific file such as nuc950, nuc960 c
+ * files rather than the public dev.c file here. so the
+ * corresponding platform_device definition should not be
+ * static.
+*/
+
+/* RTC controller*/
+
+static struct resource nuc900_rtc_resource[] = {
+ [0] = {
+ .start = W90X900_PA_RTC,
+ .end = W90X900_PA_RTC + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC,
+ .end = IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device nuc900_device_rtc = {
+ .name = "nuc900-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_rtc_resource),
+ .resource = nuc900_rtc_resource,
+};
+
+/*TouchScreen controller*/
+
+static struct resource nuc900_ts_resource[] = {
+ [0] = {
+ .start = W90X900_PA_ADC,
+ .end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_ADC,
+ .end = IRQ_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device nuc900_device_ts = {
+ .name = "nuc900-ts",
+ .id = -1,
+ .resource = nuc900_ts_resource,
+ .num_resources = ARRAY_SIZE(nuc900_ts_resource),
+};
+
+/* FMI Device */
+
+static struct resource nuc900_fmi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_FMI,
+ .end = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FMI,
+ .end = IRQ_FMI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device nuc900_device_fmi = {
+ .name = "nuc900-fmi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_fmi_resource),
+ .resource = nuc900_fmi_resource,
+};
+
+/* KPI controller*/
+
+static struct resource nuc900_kpi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_KPI,
+ .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KPI,
+ .end = IRQ_KPI,
+ .flags = IORESOURCE_IRQ,
+ }
+
+};
+
+struct platform_device nuc900_device_kpi = {
+ .name = "nuc900-kpi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_kpi_resource),
+ .resource = nuc900_kpi_resource,
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc900_public_dev[] __initdata = {
+ &nuc900_serial_device,
+ &nuc900_flash_device,
+ &nuc900_device_usb_ehci,
+ &nuc900_device_usb_ohci,
+ &nuc900_device_usbgadget,
+ &nuc900_device_emc,
+ &nuc900_device_spi,
+ &nuc900_device_wdt,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc900_board_init(struct platform_device **device, int size)
+{
+ platform_add_devices(device, size);
+ platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
+ spi_register_board_info(nuc900_spi_board_info,
+ ARRAY_SIZE(nuc900_spi_board_info));
+}
+
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
index c72e0dfa182..ba05aec7ea4 100644
--- a/arch/arm/mach-w90x900/gpio.c
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -1,7 +1,7 @@
/*
- * linux/arch/arm/mach-w90p910/gpio.c
+ * linux/arch/arm/mach-w90x900/gpio.c
*
- * Generic w90p910 GPIO handling
+ * Generic nuc900 GPIO handling
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -30,31 +30,31 @@
#define GPIO_IN (0x0C)
#define GROUPINERV (0x10)
#define GPIO_GPIO(Nb) (0x00000001 << (Nb))
-#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
-#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio) \
+#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio) \
{ \
.chip = { \
.label = name, \
- .direction_input = w90p910_dir_input, \
- .direction_output = w90p910_dir_output, \
- .get = w90p910_gpio_get, \
- .set = w90p910_gpio_set, \
+ .direction_input = nuc900_dir_input, \
+ .direction_output = nuc900_dir_output, \
+ .get = nuc900_gpio_get, \
+ .set = nuc900_gpio_set, \
.base = base_gpio, \
.ngpio = nr_gpio, \
} \
}
-struct w90p910_gpio_chip {
+struct nuc900_gpio_chip {
struct gpio_chip chip;
void __iomem *regbase; /* Base of group register*/
spinlock_t gpio_lock;
};
-static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
unsigned int regval;
regval = __raw_readl(pio);
@@ -63,14 +63,14 @@ static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
return (regval != 0);
}
-static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
@@ -81,36 +81,36 @@ static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
__raw_writel(regval, pio);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
}
-static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
regval &= ~GPIO_GPIO(offset);
__raw_writel(regval, pio);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
return 0;
}
-static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
- void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
regval |= GPIO_GPIO(offset);
@@ -125,28 +125,28 @@ static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
__raw_writel(regval, outreg);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
return 0;
}
-static struct w90p910_gpio_chip w90p910_gpio[] = {
- W90P910_GPIO_CHIP("GROUPC", 0, 16),
- W90P910_GPIO_CHIP("GROUPD", 16, 10),
- W90P910_GPIO_CHIP("GROUPE", 26, 14),
- W90P910_GPIO_CHIP("GROUPF", 40, 10),
- W90P910_GPIO_CHIP("GROUPG", 50, 17),
- W90P910_GPIO_CHIP("GROUPH", 67, 8),
- W90P910_GPIO_CHIP("GROUPI", 75, 17),
+static struct nuc900_gpio_chip nuc900_gpio[] = {
+ NUC900_GPIO_CHIP("GROUPC", 0, 16),
+ NUC900_GPIO_CHIP("GROUPD", 16, 10),
+ NUC900_GPIO_CHIP("GROUPE", 26, 14),
+ NUC900_GPIO_CHIP("GROUPF", 40, 10),
+ NUC900_GPIO_CHIP("GROUPG", 50, 17),
+ NUC900_GPIO_CHIP("GROUPH", 67, 8),
+ NUC900_GPIO_CHIP("GROUPI", 75, 17),
};
-void __init w90p910_init_gpio(int nr_group)
+void __init nuc900_init_gpio(int nr_group)
{
unsigned i;
- struct w90p910_gpio_chip *gpio_chip;
+ struct nuc900_gpio_chip *gpio_chip;
for (i = 0; i < nr_group; i++) {
- gpio_chip = &w90p910_gpio[i];
+ gpio_chip = &nuc900_gpio[i];
spin_lock_init(&gpio_chip->gpio_lock);
gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
gpiochip_add(&gpio_chip->chip);
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
index f10b6a8dc06..516d6b477b6 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-clock.h
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -28,4 +28,26 @@
#define REG_CLKEN1 (CLK_BA + 0x24)
#define REG_CLKDIV1 (CLK_BA + 0x28)
+/* Define PLL freq setting */
+#define PLL_DISABLE 0x12B63
+#define PLL_66MHZ 0x2B63
+#define PLL_100MHZ 0x4F64
+#define PLL_120MHZ 0x4F63
+#define PLL_166MHZ 0x4124
+#define PLL_200MHZ 0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define AHB_CPUCLK_1_1 0x00
+#define AHB_CPUCLK_1_2 0x01
+#define AHB_CPUCLK_1_4 0x02
+#define AHB_CPUCLK_1_8 0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2 0x01
+#define APB_AHB_1_4 0x02
+#define APB_AHB_1_8 0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW 0x48
+
#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
new file mode 100644
index 00000000000..b68455e7f88
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA W90X900_VA_EBI
+#define REG_EBICON (EBI_BA + 0x00)
+#define REG_ROMCON (EBI_BA + 0x04)
+#define REG_SDCONF0 (EBI_BA + 0x08)
+#define REG_SDCONF1 (EBI_BA + 0x0C)
+#define REG_SDTIME0 (EBI_BA + 0x10)
+#define REG_SDTIME1 (EBI_BA + 0x14)
+#define REG_EXT0CON (EBI_BA + 0x18)
+#define REG_EXT1CON (EBI_BA + 0x1C)
+#define REG_EXT2CON (EBI_BA + 0x20)
+#define REG_EXT3CON (EBI_BA + 0x24)
+#define REG_EXT4CON (EBI_BA + 0x28)
+#define REG_CKSKEW (EBI_BA + 0x2C)
+
+#endif /* __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index 0b4fc194729..0ce9d8e867e 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -10,8 +10,7 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
*
*/
@@ -29,9 +28,114 @@
#include <mach/hardware.h>
#include <mach/regs-irq.h>
-static void w90x900_irq_mask(unsigned int irq)
+struct group_irq {
+ unsigned long gpen;
+ unsigned int enabled;
+ void (*enable)(struct group_irq *, int enable);
+};
+
+static DEFINE_SPINLOCK(groupirq_lock);
+
+#define DEFINE_GROUP(_name, _ctrlbit, _num) \
+struct group_irq group_##_name = { \
+ .enable = nuc900_group_enable, \
+ .gpen = ((1 << _num) - 1) << _ctrlbit, \
+ }
+
+static void nuc900_group_enable(struct group_irq *gpirq, int enable);
+
+static DEFINE_GROUP(nirq0, 0, 4);
+static DEFINE_GROUP(nirq1, 4, 4);
+static DEFINE_GROUP(usbh, 8, 2);
+static DEFINE_GROUP(ottimer, 16, 3);
+static DEFINE_GROUP(gdma, 20, 2);
+static DEFINE_GROUP(sc, 24, 2);
+static DEFINE_GROUP(i2c, 26, 2);
+static DEFINE_GROUP(ps2, 28, 2);
+
+static int group_irq_enable(struct group_irq *group_irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&groupirq_lock, flags);
+ if (group_irq->enabled++ == 0)
+ (group_irq->enable)(group_irq, 1);
+ spin_unlock_irqrestore(&groupirq_lock, flags);
+
+ return 0;
+}
+
+static void group_irq_disable(struct group_irq *group_irq)
{
+ unsigned long flags;
+
+ WARN_ON(group_irq->enabled == 0);
+
+ spin_lock_irqsave(&groupirq_lock, flags);
+ if (--group_irq->enabled == 0)
+ (group_irq->enable)(group_irq, 0);
+ spin_unlock_irqrestore(&groupirq_lock, flags);
+}
+
+static void nuc900_group_enable(struct group_irq *gpirq, int enable)
+{
+ unsigned int groupen = gpirq->gpen;
+ unsigned long regval;
+
+ regval = __raw_readl(REG_AIC_GEN);
+
+ if (enable)
+ regval |= groupen;
+ else
+ regval &= ~groupen;
+
+ __raw_writel(regval, REG_AIC_GEN);
+}
+
+static void nuc900_irq_mask(unsigned int irq)
+{
+ struct group_irq *group_irq;
+
+ group_irq = NULL;
+
__raw_writel(1 << irq, REG_AIC_MDCR);
+
+ switch (irq) {
+ case IRQ_GROUP0:
+ group_irq = &group_nirq0;
+ break;
+
+ case IRQ_GROUP1:
+ group_irq = &group_nirq1;
+ break;
+
+ case IRQ_USBH:
+ group_irq = &group_usbh;
+ break;
+
+ case IRQ_T_INT_GROUP:
+ group_irq = &group_ottimer;
+ break;
+
+ case IRQ_GDMAGROUP:
+ group_irq = &group_gdma;
+ break;
+
+ case IRQ_SCGROUP:
+ group_irq = &group_sc;
+ break;
+
+ case IRQ_I2CGROUP:
+ group_irq = &group_i2c;
+ break;
+
+ case IRQ_P2SGROUP:
+ group_irq = &group_ps2;
+ break;
+ }
+
+ if (group_irq)
+ group_irq_disable(group_irq);
}
/*
@@ -39,37 +143,71 @@ static void w90x900_irq_mask(unsigned int irq)
* to REG_AIC_EOSCR for ACK
*/
-static void w90x900_irq_ack(unsigned int irq)
+static void nuc900_irq_ack(unsigned int irq)
{
__raw_writel(0x01, REG_AIC_EOSCR);
}
-static void w90x900_irq_unmask(unsigned int irq)
+static void nuc900_irq_unmask(unsigned int irq)
{
- unsigned long mask;
+ struct group_irq *group_irq;
+
+ group_irq = NULL;
- if (irq == IRQ_T_INT_GROUP) {
- mask = __raw_readl(REG_AIC_GEN);
- __raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN);
- __raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR);
- }
__raw_writel(1 << irq, REG_AIC_MECR);
+
+ switch (irq) {
+ case IRQ_GROUP0:
+ group_irq = &group_nirq0;
+ break;
+
+ case IRQ_GROUP1:
+ group_irq = &group_nirq1;
+ break;
+
+ case IRQ_USBH:
+ group_irq = &group_usbh;
+ break;
+
+ case IRQ_T_INT_GROUP:
+ group_irq = &group_ottimer;
+ break;
+
+ case IRQ_GDMAGROUP:
+ group_irq = &group_gdma;
+ break;
+
+ case IRQ_SCGROUP:
+ group_irq = &group_sc;
+ break;
+
+ case IRQ_I2CGROUP:
+ group_irq = &group_i2c;
+ break;
+
+ case IRQ_P2SGROUP:
+ group_irq = &group_ps2;
+ break;
+ }
+
+ if (group_irq)
+ group_irq_enable(group_irq);
}
-static struct irq_chip w90x900_irq_chip = {
- .ack = w90x900_irq_ack,
- .mask = w90x900_irq_mask,
- .unmask = w90x900_irq_unmask,
+static struct irq_chip nuc900_irq_chip = {
+ .ack = nuc900_irq_ack,
+ .mask = nuc900_irq_mask,
+ .unmask = nuc900_irq_unmask,
};
-void __init w90x900_init_irq(void)
+void __init nuc900_init_irq(void)
{
int irqno;
__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
- set_irq_chip(irqno, &w90x900_irq_chip);
+ set_irq_chip(irqno, &nuc900_irq_chip);
set_irq_handler(irqno, handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
new file mode 100644
index 00000000000..ec05bda946f
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc910.h"
+
+static void __init nuc910evb_map_io(void)
+{
+ nuc910_map_io();
+ nuc910_init_clocks();
+}
+
+static void __init nuc910evb_init(void)
+{
+ nuc910_board_init();
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc910evb_map_io,
+ .init_irq = nuc900_init_irq,
+ .init_machine = nuc910evb_init,
+ .timer = &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
new file mode 100644
index 00000000000..cef903bcccd
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc950evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc950.h"
+
+static void __init nuc950evb_map_io(void)
+{
+ nuc950_map_io();
+ nuc950_init_clocks();
+}
+
+static void __init nuc950evb_init(void)
+{
+ nuc950_board_init();
+}
+
+MACHINE_START(W90P950EVB, "W90P950EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc950evb_map_io,
+ .init_irq = nuc900_init_irq,
+ .init_machine = nuc950evb_init,
+ .timer = &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
new file mode 100644
index 00000000000..e3a46f19f2b
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc960evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc960.h"
+
+static void __init nuc960evb_map_io(void)
+{
+ nuc960_map_io();
+ nuc960_init_clocks();
+}
+
+static void __init nuc960evb_init(void)
+{
+ nuc960_board_init();
+}
+
+MACHINE_START(W90N960EVB, "W90N960EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc960evb_map_io,
+ .init_irq = nuc900_init_irq,
+ .init_machine = nuc960evb_init,
+ .timer = &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
deleted file mode 100644
index 7a62bd348e8..00000000000
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-
-#include "cpu.h"
-/*w90p910 evb norflash driver data */
-
-#define W90P910_FLASH_BASE 0xA0000000
-#define W90P910_FLASH_SIZE 0x400000
-
-static struct mtd_partition w90p910_flash_partitions[] = {
- {
- .name = "NOR Partition 1 for kernel (960K)",
- .size = 0xF0000,
- .offset = 0x10000,
- },
- {
- .name = "NOR Partition 2 for image (1M)",
- .size = 0x100000,
- .offset = 0x100000,
- },
- {
- .name = "NOR Partition 3 for user (2M)",
- .size = 0x200000,
- .offset = 0x00200000,
- }
-};
-
-static struct physmap_flash_data w90p910_flash_data = {
- .width = 2,
- .parts = w90p910_flash_partitions,
- .nr_parts = ARRAY_SIZE(w90p910_flash_partitions),
-};
-
-static struct resource w90p910_flash_resources[] = {
- {
- .start = W90P910_FLASH_BASE,
- .end = W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device w90p910_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &w90p910_flash_data,
- },
- .resource = w90p910_flash_resources,
- .num_resources = ARRAY_SIZE(w90p910_flash_resources),
-};
-
-/* USB EHCI Host Controller */
-
-static struct resource w90x900_usb_ehci_resource[] = {
- [0] = {
- .start = W90X900_PA_USBEHCIHOST,
- .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
-
-struct platform_device w90x900_device_usb_ehci = {
- .name = "w90x900-ehci",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usb_ehci_resource),
- .resource = w90x900_usb_ehci_resource,
- .dev = {
- .dma_mask = &w90x900_device_usb_ehci_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-EXPORT_SYMBOL(w90x900_device_usb_ehci);
-
-/* USB OHCI Host Controller */
-
-static struct resource w90x900_usb_ohci_resource[] = {
- [0] = {
- .start = W90X900_PA_USBOHCIHOST,
- .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
-struct platform_device w90x900_device_usb_ohci = {
- .name = "w90x900-ohci",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usb_ohci_resource),
- .resource = w90x900_usb_ohci_resource,
- .dev = {
- .dma_mask = &w90x900_device_usb_ohci_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-EXPORT_SYMBOL(w90x900_device_usb_ohci);
-
-/*TouchScreen controller*/
-
-static struct resource w90x900_ts_resource[] = {
- [0] = {
- .start = W90X900_PA_ADC,
- .end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_ADC,
- .end = IRQ_ADC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device w90x900_device_ts = {
- .name = "w90x900-ts",
- .id = -1,
- .resource = w90x900_ts_resource,
- .num_resources = ARRAY_SIZE(w90x900_ts_resource),
-};
-EXPORT_SYMBOL(w90x900_device_ts);
-
-/* RTC controller*/
-
-static struct resource w90x900_rtc_resource[] = {
- [0] = {
- .start = W90X900_PA_RTC,
- .end = W90X900_PA_RTC + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTC,
- .end = IRQ_RTC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device w90x900_device_rtc = {
- .name = "w90x900-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_rtc_resource),
- .resource = w90x900_rtc_resource,
-};
-EXPORT_SYMBOL(w90x900_device_rtc);
-
-/* KPI controller*/
-
-static struct resource w90x900_kpi_resource[] = {
- [0] = {
- .start = W90X900_PA_KPI,
- .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KPI,
- .end = IRQ_KPI,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device w90x900_device_kpi = {
- .name = "w90x900-kpi",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_kpi_resource),
- .resource = w90x900_kpi_resource,
-};
-EXPORT_SYMBOL(w90x900_device_kpi);
-
-/* USB Device (Gadget)*/
-
-static struct resource w90x900_usbgadget_resource[] = {
- [0] = {
- .start = W90X900_PA_USBDEV,
- .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBD,
- .end = IRQ_USBD,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device w90x900_device_usbgadget = {
- .name = "w90x900-usbgadget",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usbgadget_resource),
- .resource = w90x900_usbgadget_resource,
-};
-EXPORT_SYMBOL(w90x900_device_usbgadget);
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-};
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *w90p910evb_dev[] __initdata = {
- &w90p910_serial_device,
- &w90p910_flash_device,
- &w90x900_device_usb_ehci,
- &w90x900_device_usb_ohci,
- &w90x900_device_ts,
- &w90x900_device_rtc,
- &w90x900_device_kpi,
- &w90x900_device_usbgadget,
-};
-
-static void __init w90p910evb_map_io(void)
-{
- w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
- w90p910_init_clocks();
-}
-
-static void __init w90p910evb_init(void)
-{
- platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
-}
-
-MACHINE_START(W90P910EVB, "W90P910EVB")
- /* Maintainer: Wan ZongShun */
- .phys_io = W90X900_PA_UART,
- .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
- .boot_params = 0,
- .map_io = w90p910evb_map_io,
- .init_irq = w90x900_init_irq,
- .init_machine = w90p910evb_init,
- .timer = &w90x900_timer,
-MACHINE_END
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
deleted file mode 100644
index a3520fefb5e..00000000000
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mfp-w90p910.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define REG_MFSEL (W90X900_VA_GCR + 0xC)
-
-#define GPSELF (0x01 << 1)
-
-#define GPSELC (0x03 << 2)
-#define ENKPI (0x02 << 2)
-#define ENNAND (0x01 << 2)
-
-#define GPSELEI0 (0x01 << 26)
-#define GPSELEI1 (0x01 << 27)
-
-static DECLARE_MUTEX(mfp_sem);
-
-void mfp_set_groupf(struct device *dev)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- down(&mfp_sem);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "w90p910-emc") == 0)
- mfpen |= GPSELF;/*enable mac*/
- else
- mfpen &= ~GPSELF;/*GPIOF[9:0]*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupf);
-
-void mfp_set_groupc(struct device *dev)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- down(&mfp_sem);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "w90p910-lcd") == 0)
- mfpen |= GPSELC;/*enable lcd*/
- else if (strcmp(dev_id, "w90p910-kpi") == 0) {
- mfpen &= (~GPSELC);/*enable kpi*/
- mfpen |= ENKPI;
- } else if (strcmp(dev_id, "w90p910-nand") == 0) {
- mfpen &= (~GPSELC);/*enable nand*/
- mfpen |= ENNAND;
- } else
- mfpen &= (~GPSELC);/*GPIOC[14:0]*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupc);
-
-void mfp_set_groupi(struct device *dev, int gpio)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- down(&mfp_sem);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "w90p910-wdog") == 0)
- mfpen |= GPSELEI1;/*enable wdog*/
- else if (strcmp(dev_id, "w90p910-atapi") == 0)
- mfpen |= GPSELEI0;/*enable atapi*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupi);
-
diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c
new file mode 100644
index 00000000000..a47dc9a708e
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL (W90X900_VA_GCR + 0xC)
+
+#define GPSELF (0x01 << 1)
+
+#define GPSELC (0x03 << 2)
+#define ENKPI (0x02 << 2)
+#define ENNAND (0x01 << 2)
+
+#define GPSELEI0 (0x01 << 26)
+#define GPSELEI1 (0x01 << 27)
+
+#define GPIOG0TO1 (0x03 << 14)
+#define GPIOG2TO3 (0x03 << 16)
+#define ENSPI (0x0a << 14)
+#define ENI2C0 (0x01 << 14)
+#define ENI2C1 (0x01 << 16)
+
+static DEFINE_MUTEX(mfp_mutex);
+
+void mfp_set_groupf(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "nuc900-emc") == 0)
+ mfpen |= GPSELF;/*enable mac*/
+ else
+ mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "nuc900-lcd") == 0)
+ mfpen |= GPSELC;/*enable lcd*/
+ else if (strcmp(dev_id, "nuc900-kpi") == 0) {
+ mfpen &= (~GPSELC);/*enable kpi*/
+ mfpen |= ENKPI;
+ } else if (strcmp(dev_id, "nuc900-nand") == 0) {
+ mfpen &= (~GPSELC);/*enable nand*/
+ mfpen |= ENNAND;
+ } else
+ mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ mfpen &= ~GPSELEI1;/*default gpio16*/
+
+ if (strcmp(dev_id, "nuc900-wdog") == 0)
+ mfpen |= GPSELEI1;/*enable wdog*/
+ else if (strcmp(dev_id, "nuc900-atapi") == 0)
+ mfpen |= GPSELEI0;/*enable atapi*/
+ else if (strcmp(dev_id, "nuc900-keypad") == 0)
+ mfpen &= ~GPSELEI0;/*enable keypad*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
+void mfp_set_groupg(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "nuc900-spi") == 0) {
+ mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
+ mfpen |= ENSPI;/*enable spi*/
+ } else if (strcmp(dev_id, "nuc900-i2c0") == 0) {
+ mfpen &= ~(GPIOG0TO1);
+ mfpen |= ENI2C0;/*enable i2c0*/
+ } else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
+ mfpen &= ~(GPIOG2TO3);
+ mfpen |= ENI2C1;/*enable i2c1*/
+ } else {
+ mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
+ }
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupg);
+
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
new file mode 100644
index 00000000000..656f03b3b62
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -0,0 +1,60 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc910_dev[] __initdata = {
+ &nuc900_device_ts,
+ &nuc900_device_rtc,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc910evb_iodesc[] __initdata = {
+ IODESC_ENT(USBEHCIHOST),
+ IODESC_ENT(USBOHCIHOST),
+ IODESC_ENT(KPI),
+ IODESC_ENT(USBDEV),
+ IODESC_ENT(ADC),
+};
+
+/*Init NUC910 evb io*/
+
+void __init nuc910_map_io(void)
+{
+ nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc));
+}
+
+/*Init NUC910 clock*/
+
+void __init nuc910_init_clocks(void)
+{
+ nuc900_init_clocks();
+}
+
+/*Init NUC910 board info*/
+
+void __init nuc910_board_init(void)
+{
+ nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h
new file mode 100644
index 00000000000..83e9ba5fc26
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc910.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc910.c */
+
+extern void nuc910_board_init(void);
+extern void nuc910_init_clocks(void);
+extern void nuc910_map_io(void);
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
new file mode 100644
index 00000000000..149508116d1
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc950.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC950 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc950_dev[] __initdata = {
+ &nuc900_device_kpi,
+ &nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc950evb_iodesc[] __initdata = {
+};
+
+/*Init NUC950 evb io*/
+
+void __init nuc950_map_io(void)
+{
+ nuc900_map_io(nuc950evb_iodesc, ARRAY_SIZE(nuc950evb_iodesc));
+}
+
+/*Init NUC950 clock*/
+
+void __init nuc950_init_clocks(void)
+{
+ nuc900_init_clocks();
+}
+
+/*Init NUC950 board info*/
+
+void __init nuc950_board_init(void)
+{
+ nuc900_board_init(nuc950_dev, ARRAY_SIZE(nuc950_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h
new file mode 100644
index 00000000000..98a1148bc5a
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc950.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc950.c */
+
+extern void nuc950_board_init(void);
+extern void nuc950_init_clocks(void);
+extern void nuc950_map_io(void);
diff --git a/arch/arm/mach-w90x900/nuc960.c b/arch/arm/mach-w90x900/nuc960.c
new file mode 100644
index 00000000000..8851a3a27ce
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc960.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC960 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc960_dev[] __initdata = {
+ &nuc900_device_kpi,
+ &nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc960evb_iodesc[] __initdata = {
+};
+
+/*Init NUC960 evb io*/
+
+void __init nuc960_map_io(void)
+{
+ nuc900_map_io(nuc960evb_iodesc, ARRAY_SIZE(nuc960evb_iodesc));
+}
+
+/*Init NUC960 clock*/
+
+void __init nuc960_init_clocks(void)
+{
+ nuc900_init_clocks();
+}
+
+/*Init NUC960 board info*/
+
+void __init nuc960_board_init(void)
+{
+ nuc900_board_init(nuc960_dev, ARRAY_SIZE(nuc960_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h
new file mode 100644
index 00000000000..f0c07cbe3a8
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc960.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc960.c */
+
+extern void nuc960_board_init(void);
+extern void nuc960_init_clocks(void);
+extern void nuc960_map_io(void);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index bcc838f6b39..4128af870b4 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -3,7 +3,7 @@
*
* Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
*
- * Copyright (c) 2008 Nuvoton technology corporation
+ * Copyright (c) 2009 Nuvoton technology corporation
* All rights reserved.
*
* Wan ZongShun <mcuos.com@gmail.com>
@@ -23,6 +23,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/leds.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
#include <asm/mach-types.h>
#include <asm/mach/irq.h>
@@ -31,49 +33,150 @@
#include <mach/map.h>
#include <mach/regs-timer.h>
-static unsigned long w90x900_gettimeoffset(void)
+#define RESETINT 0x1f
+#define PERIOD (0x01 << 27)
+#define ONESHOT (0x00 << 27)
+#define COUNTEN (0x01 << 30)
+#define INTEN (0x01 << 29)
+
+#define TICKS_PER_SEC 100
+#define PRESCALE 0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static void nuc900_clockevent_setmode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
{
+ unsigned int val;
+
+ val = __raw_readl(REG_TCSR0);
+ val &= ~(0x03 << 27);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ __raw_writel(timer0_load, REG_TICR0);
+ val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+
+ __raw_writel(val, REG_TCSR0);
+}
+
+static int nuc900_clockevent_setnextevent(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ unsigned int val;
+
+ __raw_writel(evt, REG_TICR0);
+
+ val = __raw_readl(REG_TCSR0);
+ val |= (COUNTEN | INTEN | PRESCALE);
+ __raw_writel(val, REG_TCSR0);
+
return 0;
}
+static struct clock_event_device nuc900_clockevent_device = {
+ .name = "nuc900-timer0",
+ .shift = 32,
+ .features = CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = nuc900_clockevent_setmode,
+ .set_next_event = nuc900_clockevent_setnextevent,
+ .rating = 300,
+};
+
/*IRQ handler for the timer*/
-static irqreturn_t
-w90x900_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
{
- timer_tick();
+ struct clock_event_device *evt = &nuc900_clockevent_device;
+
__raw_writel(0x01, REG_TISR); /* clear TIF0 */
+
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
-static struct irqaction w90x900_timer_irq = {
- .name = "w90x900 Timer Tick",
+static struct irqaction nuc900_timer0_irq = {
+ .name = "nuc900-timer0",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = w90x900_timer_interrupt,
+ .handler = nuc900_timer0_interrupt,
};
-/*Set up timer reg.*/
+static void __init nuc900_clockevents_init(unsigned int rate)
+{
+ nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+ nuc900_clockevent_device.shift);
+ nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+ &nuc900_clockevent_device);
+ nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+ &nuc900_clockevent_device);
+ nuc900_clockevent_device.cpumask = cpumask_of(0);
-static void w90x900_timer_setup(void)
+ clockevents_register_device(&nuc900_clockevent_device);
+}
+
+static cycle_t nuc900_get_cycles(struct clocksource *cs)
{
- __raw_writel(0, REG_TCSR0);
- __raw_writel(0, REG_TCSR1);
- __raw_writel(0, REG_TCSR2);
- __raw_writel(0, REG_TCSR3);
- __raw_writel(0, REG_TCSR4);
- __raw_writel(0x1F, REG_TISR);
- __raw_writel(15000000/(100 * 100), REG_TICR0);
- __raw_writel(0x68000063, REG_TCSR0);
+ return ~__raw_readl(REG_TDR1);
}
-static void __init w90x900_timer_init(void)
+static struct clocksource clocksource_nuc900 = {
+ .name = "nuc900-timer1",
+ .rating = 200,
+ .read = nuc900_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init nuc900_clocksource_init(unsigned int rate)
{
- w90x900_timer_setup();
- setup_irq(IRQ_TIMER0, &w90x900_timer_irq);
+ unsigned int val;
+
+ __raw_writel(0xffffffff, REG_TICR1);
+
+ val = __raw_readl(REG_TCSR1);
+ val |= (COUNTEN | PERIOD);
+ __raw_writel(val, REG_TCSR1);
+
+ clocksource_nuc900.mult =
+ clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
+ clocksource_register(&clocksource_nuc900);
+}
+
+static void __init nuc900_timer_init(void)
+{
+ struct clk *ck_ext = clk_get(NULL, "ext");
+ unsigned int rate;
+
+ BUG_ON(IS_ERR(ck_ext));
+
+ rate = clk_get_rate(ck_ext);
+ clk_put(ck_ext);
+ rate = rate / (PRESCALE + 0x01);
+
+ /* set a known state */
+ __raw_writel(0x00, REG_TCSR0);
+ __raw_writel(0x00, REG_TCSR1);
+ __raw_writel(RESETINT, REG_TISR);
+ timer0_load = (rate / TICKS_PER_SEC);
+
+ setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
+
+ nuc900_clocksource_init(rate);
+ nuc900_clockevents_init(rate);
}
-struct sys_timer w90x900_timer = {
- .init = w90x900_timer_init,
- .offset = w90x900_gettimeoffset,
- .resume = w90x900_timer_setup
+struct sys_timer nuc900_timer = {
+ .init = nuc900_timer_init,
};
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
deleted file mode 100644
index 1c97e4930b7..00000000000
--- a/arch/arm/mach-w90x900/w90p910.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/w90p910.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * W90P910 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* Initial IO mappings */
-
-static struct map_desc w90p910_iodesc[] __initdata = {
- IODESC_ENT(IRQ),
- IODESC_ENT(GCR),
- IODESC_ENT(UART),
- IODESC_ENT(TIMER),
- IODESC_ENT(EBI),
- IODESC_ENT(USBEHCIHOST),
- IODESC_ENT(USBOHCIHOST),
- IODESC_ENT(ADC),
- IODESC_ENT(RTC),
- IODESC_ENT(KPI),
- IODESC_ENT(USBDEV),
- /*IODESC_ENT(LCD),*/
-};
-
-/* Initial clock declarations. */
-static DEFINE_CLK(lcd, 0);
-static DEFINE_CLK(audio, 1);
-static DEFINE_CLK(fmi, 4);
-static DEFINE_CLK(dmac, 5);
-static DEFINE_CLK(atapi, 6);
-static DEFINE_CLK(emc, 7);
-static DEFINE_CLK(usbd, 8);
-static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);;
-static DEFINE_CLK(pwm, 18);
-static DEFINE_CLK(ps2, 24);
-static DEFINE_CLK(kpi, 25);
-static DEFINE_CLK(wdt, 26);
-static DEFINE_CLK(gdma, 27);
-static DEFINE_CLK(adc, 28);
-static DEFINE_CLK(usi, 29);
-
-static struct clk_lookup w90p910_clkregs[] = {
- DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
- DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
- DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
- DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
- DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
- DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
- DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
- DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
- DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
- DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
- DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
- DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
- DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
- DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
- DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
- DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port w90p910_uart_data[] = {
- W90X900_8250PORT(UART0),
-};
-
-struct platform_device w90p910_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = w90p910_uart_data,
- },
-};
-
-/*Init W90P910 evb io*/
-
-void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
-{
- unsigned long idcode = 0x0;
-
- iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-
- idcode = __raw_readl(W90X900PDID);
- if (idcode != W90P910_CPUID)
- printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
-}
-
-/*Init W90P910 clock*/
-
-void __init w90p910_init_clocks(void)
-{
- clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
-}
-
-static int __init w90p910_init_cpu(void)
-{
- return 0;
-}
-
-static int __init w90x900_arch_init(void)
-{
- return w90p910_init_cpu();
-}
-arch_initcall(w90x900_arch_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 83c025e72ce..5fe595aeba6 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -758,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
+ REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK
default y
select OUTER_CACHE
help
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 03cd27d917b..b270d6228fe 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -159,7 +159,9 @@ union offset_union {
#define __get8_unaligned_check(ins,val,addr,err) \
__asm__( \
- "1: "ins" %1, [%2], #1\n" \
+ ARM( "1: "ins" %1, [%2], #1\n" ) \
+ THUMB( "1: "ins" %1, [%2]\n" ) \
+ THUMB( " add %2, %2, #1\n" ) \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
@@ -215,7 +217,9 @@ union offset_union {
do { \
unsigned int err = 0, v = val, a = addr; \
__asm__( FIRST_BYTE_16 \
- "1: "ins" %1, [%2], #1\n" \
+ ARM( "1: "ins" %1, [%2], #1\n" ) \
+ THUMB( "1: "ins" %1, [%2]\n" ) \
+ THUMB( " add %2, %2, #1\n" ) \
" mov %1, %1, "NEXT_BYTE"\n" \
"2: "ins" %1, [%2]\n" \
"3:\n" \
@@ -245,11 +249,17 @@ union offset_union {
do { \
unsigned int err = 0, v = val, a = addr; \
__asm__( FIRST_BYTE_32 \
- "1: "ins" %1, [%2], #1\n" \
+ ARM( "1: "ins" %1, [%2], #1\n" ) \
+ THUMB( "1: "ins" %1, [%2]\n" ) \
+ THUMB( " add %2, %2, #1\n" ) \
" mov %1, %1, "NEXT_BYTE"\n" \
- "2: "ins" %1, [%2], #1\n" \
+ ARM( "2: "ins" %1, [%2], #1\n" ) \
+ THUMB( "2: "ins" %1, [%2]\n" ) \
+ THUMB( " add %2, %2, #1\n" ) \
" mov %1, %1, "NEXT_BYTE"\n" \
- "3: "ins" %1, [%2], #1\n" \
+ ARM( "3: "ins" %1, [%2], #1\n" ) \
+ THUMB( "3: "ins" %1, [%2]\n" ) \
+ THUMB( " add %2, %2, #1\n" ) \
" mov %1, %1, "NEXT_BYTE"\n" \
"4: "ins" %1, [%2]\n" \
"5:\n" \
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index be93ff02a98..bda0ec31a4e 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -21,7 +21,7 @@
*
* Flush the whole D-cache.
*
- * Corrupted registers: r0-r5, r7, r9-r11
+ * Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
*
* - mm - mm_struct describing address space
*/
@@ -51,8 +51,12 @@ loop1:
loop2:
mov r9, r4 @ create working copy of max way size
loop3:
- orr r11, r10, r9, lsl r5 @ factor way and cache number into r11
- orr r11, r11, r7, lsl r2 @ factor index number into r11
+ ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11
+ THUMB( lsl r6, r9, r5 )
+ THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11
+ ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11
+ THUMB( lsl r6, r7, r2 )
+ THUMB( orr r11, r11, r6 ) @ factor index number into r11
mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
subs r9, r9, #1 @ decrement the way
bge loop3
@@ -82,11 +86,13 @@ ENDPROC(v7_flush_dcache_all)
*
*/
ENTRY(v7_flush_kern_cache_all)
- stmfd sp!, {r4-r5, r7, r9-r11, lr}
+ ARM( stmfd sp!, {r4-r5, r7, r9-r11, lr} )
+ THUMB( stmfd sp!, {r4-r7, r9-r11, lr} )
bl v7_flush_dcache_all
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
- ldmfd sp!, {r4-r5, r7, r9-r11, lr}
+ ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} )
+ THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} )
mov pc, lr
ENDPROC(v7_flush_kern_cache_all)
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 510c179b0ac..b30925fcbcd 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -36,7 +36,34 @@
#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+static u64 get_coherent_dma_mask(struct device *dev)
+{
+ u64 mask = ISA_DMA_THRESHOLD;
+
+ if (dev) {
+ mask = dev->coherent_dma_mask;
+
+ /*
+ * Sanity check the DMA mask - it must be non-zero, and
+ * must be able to be satisfied by a DMA allocation.
+ */
+ if (mask == 0) {
+ dev_warn(dev, "coherent DMA mask is unset\n");
+ return 0;
+ }
+
+ if ((~mask) & ISA_DMA_THRESHOLD) {
+ dev_warn(dev, "coherent DMA mask %#llx is smaller "
+ "than system GFP_DMA mask %#llx\n",
+ mask, (unsigned long long)ISA_DMA_THRESHOLD);
+ return 0;
+ }
+ }
+ return mask;
+}
+
+#ifdef CONFIG_MMU
/*
* These are the page tables (2MB each) covering uncached, DMA consistent allocations
*/
@@ -152,7 +179,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
struct page *page;
struct arm_vm_region *c;
unsigned long order;
- u64 mask = ISA_DMA_THRESHOLD, limit;
+ u64 mask = get_coherent_dma_mask(dev);
+ u64 limit;
if (!consistent_pte[0]) {
printk(KERN_ERR "%s: not initialised\n", __func__);
@@ -160,25 +188,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
return NULL;
}
- if (dev) {
- mask = dev->coherent_dma_mask;
-
- /*
- * Sanity check the DMA mask - it must be non-zero, and
- * must be able to be satisfied by a DMA allocation.
- */
- if (mask == 0) {
- dev_warn(dev, "coherent DMA mask is unset\n");
- goto no_page;
- }
-
- if ((~mask) & ISA_DMA_THRESHOLD) {
- dev_warn(dev, "coherent DMA mask %#llx is smaller "
- "than system GFP_DMA mask %#llx\n",
- mask, (unsigned long long)ISA_DMA_THRESHOLD);
- goto no_page;
- }
- }
+ if (!mask)
+ goto no_page;
/*
* Sanity check the allocation size.
@@ -267,6 +278,31 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
*handle = ~0;
return NULL;
}
+#else /* !CONFIG_MMU */
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+ pgprot_t prot)
+{
+ void *virt;
+ u64 mask = get_coherent_dma_mask(dev);
+
+ if (!mask)
+ goto error;
+
+ if (mask != 0xffffffff)
+ gfp |= GFP_DMA;
+ virt = kmalloc(size, gfp);
+ if (!virt)
+ goto error;
+
+ *handle = virt_to_dma(dev, virt);
+ return virt;
+
+error:
+ *handle = ~0;
+ return NULL;
+}
+#endif /* CONFIG_MMU */
/*
* Allocate DMA-coherent memory space and return both the kernel remapped
@@ -311,9 +347,10 @@ EXPORT_SYMBOL(dma_alloc_writecombine);
static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size)
{
+ int ret = -ENXIO;
+#ifdef CONFIG_MMU
unsigned long flags, user_size, kern_size;
struct arm_vm_region *c;
- int ret = -ENXIO;
user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
@@ -334,6 +371,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
vma->vm_page_prot);
}
}
+#endif /* CONFIG_MMU */
return ret;
}
@@ -358,6 +396,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
* free a page as defined by the above mapping.
* Must not be called with IRQs disabled.
*/
+#ifdef CONFIG_MMU
void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
{
struct arm_vm_region *c;
@@ -444,6 +483,14 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
__func__, cpu_addr);
dump_stack();
}
+#else /* !CONFIG_MMU */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+ if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+ return;
+ kfree(cpu_addr);
+}
+#endif /* CONFIG_MMU */
EXPORT_SYMBOL(dma_free_coherent);
/*
@@ -451,10 +498,12 @@ EXPORT_SYMBOL(dma_free_coherent);
*/
static int __init consistent_init(void)
{
+ int ret = 0;
+#ifdef CONFIG_MMU
pgd_t *pgd;
pmd_t *pmd;
pte_t *pte;
- int ret = 0, i = 0;
+ int i = 0;
u32 base = CONSISTENT_BASE;
do {
@@ -477,6 +526,7 @@ static int __init consistent_init(void)
consistent_pte[i++] = pte;
base += (1 << PGDIR_SHIFT);
} while (base < CONSISTENT_END);
+#endif /* !CONFIG_MMU */
return ret;
}
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb70982..cc8829d7e11 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,8 @@
#include <linux/kprobes.h>
#include <linux/uaccess.h>
#include <linux/page-flags.h>
+#include <linux/sched.h>
+#include <linux/highmem.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@@ -23,6 +25,7 @@
#include "fault.h"
+#ifdef CONFIG_MMU
#ifdef CONFIG_KPROBES
static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
@@ -97,6 +100,10 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
printk("\n");
}
+#else /* CONFIG_MMU */
+void show_pte(struct mm_struct *mm, unsigned long addr)
+{ }
+#endif /* CONFIG_MMU */
/*
* Oops. The kernel tried to access some page that wasn't present.
@@ -171,6 +178,7 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
__do_kernel_fault(mm, addr, fsr, regs);
}
+#ifdef CONFIG_MMU
#define VM_FAULT_BADMAP 0x010000
#define VM_FAULT_BADACCESS 0x020000
@@ -322,6 +330,13 @@ no_context:
__do_kernel_fault(mm, addr, fsr, regs);
return 0;
}
+#else /* CONFIG_MMU */
+static int
+do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ return 0;
+}
+#endif /* CONFIG_MMU */
/*
* First Level Translation Fault Handler
@@ -340,6 +355,7 @@ no_context:
* interrupt or a critical region, and should only copy the information
* from the master page table, nothing more.
*/
+#ifdef CONFIG_MMU
static int __kprobes
do_translation_fault(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
@@ -378,6 +394,14 @@ bad_area:
do_bad_area(addr, fsr, regs);
return 0;
}
+#else /* CONFIG_MMU */
+static int
+do_translation_fault(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+{
+ return 0;
+}
+#endif /* CONFIG_MMU */
/*
* Some section permission faults need to be handled gracefully.
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c07222eb5ce..575f3ad722e 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -144,7 +144,14 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
* page. This ensures that data in the physical page is mutually
* coherent with the kernels mapping.
*/
- __cpuc_flush_dcache_page(page_address(page));
+#ifdef CONFIG_HIGHMEM
+ /*
+ * kmap_atomic() doesn't set the page virtual address, and
+ * kunmap_atomic() takes care of cache flushing already.
+ */
+ if (page_address(page))
+#endif
+ __cpuc_flush_dcache_page(page_address(page));
/*
* If this is a page cache page, and we have an aliasing VIPT cache,
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index a34954d9df7..73cae57fa70 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -40,11 +40,16 @@ void *kmap_atomic(struct page *page, enum km_type type)
{
unsigned int idx;
unsigned long vaddr;
+ void *kmap;
pagefault_disable();
if (!PageHighMem(page))
return page_address(page);
+ kmap = kmap_high_get(page);
+ if (kmap)
+ return kmap;
+
idx = type + KM_TYPE_NR * smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
#ifdef CONFIG_DEBUG_HIGHMEM
@@ -80,6 +85,9 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
#else
(void) idx; /* to kill a warning */
#endif
+ } else if (vaddr >= PKMAP_ADDR(0) && vaddr < PKMAP_ADDR(LAST_PKMAP)) {
+ /* this address was obtained through kmap_high_get() */
+ kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)]));
}
pagefault_enable();
}
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 3a7279c1ce5..ea36186f32c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -15,6 +15,7 @@
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/initrd.h>
+#include <linux/sort.h>
#include <linux/highmem.h>
#include <asm/mach-types.h>
@@ -349,12 +350,43 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
free_area_init_node(node, zone_size, min, zhole_size);
}
+#ifndef CONFIG_SPARSEMEM
+int pfn_valid(unsigned long pfn)
+{
+ struct meminfo *mi = &meminfo;
+ unsigned int left = 0, right = mi->nr_banks;
+
+ do {
+ unsigned int mid = (right + left) / 2;
+ struct membank *bank = &mi->bank[mid];
+
+ if (pfn < bank_pfn_start(bank))
+ right = mid;
+ else if (pfn >= bank_pfn_end(bank))
+ left = mid + 1;
+ else
+ return 1;
+ } while (left < right);
+ return 0;
+}
+EXPORT_SYMBOL(pfn_valid);
+#endif
+
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+ const struct membank *a = _a, *b = _b;
+ long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+ return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
void __init bootmem_init(void)
{
struct meminfo *mi = &meminfo;
unsigned long min, max_low, max_high;
int node, initrd_node;
+ sort(&mi->bank, mi->nr_banks, sizeof(mi->bank[0]), meminfo_cmp, NULL);
+
/*
* Locate which node contains the ramdisk image, if any.
*/
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index ad7bacc693b..900811cc913 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -12,6 +12,7 @@
#include <asm/cacheflush.h>
#include <asm/sections.h>
#include <asm/page.h>
+#include <asm/setup.h>
#include <asm/mach/arch.h>
#include "mm.h"
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f721dec..7d63beaf974 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -77,19 +77,15 @@
* Sanity check the PTE configuration for the code below - which makes
* certain assumptions about how these bits are layed out.
*/
+#ifdef CONFIG_MMU
#if L_PTE_SHARED != PTE_EXT_SHARED
#error PTE shared bit mismatch
#endif
-#if L_PTE_BUFFERABLE != PTE_BUFFERABLE
-#error PTE bufferable bit mismatch
-#endif
-#if L_PTE_CACHEABLE != PTE_CACHEABLE
-#error PTE cacheable bit mismatch
-#endif
#if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
#error Invalid Linux PTE bit settings
#endif
+#endif /* CONFIG_MMU */
/*
* The ARMv6 and ARMv7 set_pte_ext translation function.
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 180a08d03a0..f3fa1c32fe9 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -127,7 +127,9 @@ ENDPROC(cpu_v7_switch_mm)
*/
ENTRY(cpu_v7_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
+ ARM( str r1, [r0], #-2048 ) @ linux version
+ THUMB( str r1, [r0] ) @ linux version
+ THUMB( sub r0, r0, #2048 )
bic r3, r1, #0x000003f0
bic r3, r3, #PTE_TYPE_MASK
@@ -232,7 +234,6 @@ __v7_setup:
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
mov r10, #0x1f @ domains 0, 1 = manager
mcr p15, 0, r10, c3, c0, 0 @ load domain access register
-#endif
/*
* Memory region attributes with SCTLR.TRE=1
*
@@ -265,6 +266,7 @@ __v7_setup:
ldr r6, =0x40e040e0 @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
+#endif
adr r5, v7_crval
ldmia r5, {r5, r6}
#ifdef CONFIG_CPU_ENDIAN_BE8
@@ -273,6 +275,7 @@ __v7_setup:
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
+ THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions
mov pc, lr @ return to head.S:__ret
ENDPROC(__v7_setup)
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8986b741223..ca5c7c22634 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,6 +9,7 @@ choice
config ARCH_MX1
bool "MX1-based"
select CPU_ARM920T
+ select COMMON_CLKDEV
help
This enables support for systems based on the Freescale i.MX1 family
@@ -19,6 +20,13 @@ config ARCH_MX2
help
This enables support for systems based on the Freescale i.MX2 family
+config ARCH_MX25
+ bool "MX25-based"
+ select CPU_ARM926T
+ select COMMON_CLKDEV
+ help
+ This enables support for systems based on the Freescale i.MX25 family
+
config ARCH_MX3
bool "MX3-based"
select CPU_V6
@@ -26,11 +34,20 @@ config ARCH_MX3
help
This enables support for systems based on the Freescale i.MX3 family
+config ARCH_MXC91231
+ bool "MXC91231-based"
+ select CPU_V6
+ select COMMON_CLKDEV
+ help
+ This enables support for systems based on the Freescale MXC91231 family
+
endchoice
source "arch/arm/mach-mx1/Kconfig"
source "arch/arm/mach-mx2/Kconfig"
source "arch/arm/mach-mx3/Kconfig"
+source "arch/arm/mach-mx25/Kconfig"
+source "arch/arm/mach-mxc91231/Kconfig"
endmenu
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 92e13566cd4..9e8fbd57495 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -39,6 +39,7 @@
#include <linux/string.h>
#include <mach/clock.h>
+#include <mach/hardware.h>
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
@@ -47,76 +48,6 @@ static DEFINE_MUTEX(clocks_mutex);
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
-/*
- * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all
- * MXC architectures have switched to using clkdev.
- */
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Retrieve a clock by name.
- *
- * Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use "<name>.<id>". If this fails,
- * we try to use clock name only.
- * The reference count to the clock's module owner ref count is incremented.
- */
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
- int idno;
- const char *str;
-
- if (id == NULL)
- return clk;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, node) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
-
- str = strrchr(id, '.');
- if (str) {
- int cnt = str - id;
- str++;
- idno = simple_strtol(str, NULL, 10);
- list_for_each_entry(p, &clocks, node) {
- if (p->id == idno &&
- strlen(p->name) == cnt &&
- strncmp(id, p->name, cnt) == 0 &&
- try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
- }
-
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
-
- printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id);
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
-}
-EXPORT_SYMBOL(clk_get);
-#endif
-
static void __clk_disable(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
@@ -193,16 +124,6 @@ unsigned long clk_get_rate(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_rate);
-#ifndef CONFIG_COMMON_CLKDEV
-/* Decrement the clock's module reference count */
-void clk_put(struct clk *clk)
-{
- if (clk && !IS_ERR(clk))
- module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-#endif
-
/* Round the requested clock rate to the nearest supported
* rate that is less than or equal to the requested rate.
* This is dependent on the clock's current parent.
@@ -265,80 +186,6 @@ struct clk *clk_get_parent(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_parent);
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Add a new clock to the clock tree.
- */
-int clk_register(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- list_add(&clk->node, &clocks);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-/* Remove a clock from the clock tree */
-void clk_unregister(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
-
- mutex_lock(&clocks_mutex);
- list_del(&clk->node);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-#ifdef CONFIG_PROC_FS
-static int mxc_clock_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- struct clk *clkp;
- char *p = page;
- int len;
-
- list_for_each_entry(clkp, &clocks, node) {
- p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id,
- clk_get_rate(clkp), clkp->usecount);
- if (clkp->parent)
- p += sprintf(p, ", %s-%d\n", clkp->parent->name,
- clkp->parent->id);
- else
- p += sprintf(p, "\n");
- }
-
- len = (p - page) - off;
- if (len < 0)
- len = 0;
-
- *eof = (len <= count) ? 1 : 0;
- *start = page + off;
-
- return len;
-}
-
-static int __init mxc_setup_proc_entry(void)
-{
- struct proc_dir_entry *res;
-
- res = create_proc_read_entry("cpu/clocks", 0, NULL,
- mxc_clock_read_proc, NULL);
- if (!res) {
- printk(KERN_ERR "Failed to create proc/cpu/clocks\n");
- return -ENOMEM;
- }
- return 0;
-}
-
-late_initcall(mxc_setup_proc_entry);
-#endif /* CONFIG_PROC_FS */
-#endif
-
/*
* Get the resulting clock rate from a PLL register value and the input
* frequency. PLLs with this register layout can at least be found on
@@ -363,12 +210,11 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
mfn_abs = mfn;
-#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21
- if (mfn >= 0x200) {
- mfn |= 0xFFFFFE00;
- mfn_abs = -mfn;
- }
-#endif
+ /* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+ * 2's complements number
+ */
+ if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+ mfn_abs = 0x400 - mfn;
freq *= 2;
freq /= pd + 1;
@@ -376,8 +222,10 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
ll = (unsigned long long)freq * mfn_abs;
do_div(ll, mfd + 1);
- if (mfn < 0)
+
+ if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
ll = -ll;
+
ll = (freq * mfi) + ll;
return ll;
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 7506d963be4..cfc4a8b43e6 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -29,6 +29,23 @@
static struct mxc_gpio_port *mxc_gpio_ports;
static int gpio_table_size;
+#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2())
+
+#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00)
+#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04)
+#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08)
+#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C)
+#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10)
+#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14)
+#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
+#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
+
+#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0)
+#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1)
+#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2)
+#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3)
+#define GPIO_INT_NONE 0x4
+
/* Note: This driver assumes 32 GPIOs are handled in one register */
static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
@@ -162,7 +179,6 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
}
}
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
/* MX1 and MX3 has one interrupt *per* gpio port */
static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
{
@@ -174,9 +190,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
mxc_gpio_irq_handler(port, irq_stat);
}
-#endif
-#ifdef CONFIG_ARCH_MX2
/* MX2 has one interrupt *for all* gpio ports */
static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
{
@@ -195,7 +209,6 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
mxc_gpio_irq_handler(&port[i], irq_stat);
}
}
-#endif
static struct irq_chip gpio_irq_chip = {
.ack = gpio_ack_irq,
@@ -284,17 +297,18 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
/* its a serious configuration bug when it fails */
BUG_ON( gpiochip_add(&port[i].chip) < 0 );
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
- /* setup one handler for each entry */
- set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
- set_irq_data(port[i].irq, &port[i]);
-#endif
+ if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) {
+ /* setup one handler for each entry */
+ set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
+ set_irq_data(port[i].irq, &port[i]);
+ }
+ }
+
+ if (cpu_is_mx2()) {
+ /* setup one handler for all GPIO interrupts */
+ set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
+ set_irq_data(port[0].irq, port);
}
-#ifdef CONFIG_ARCH_MX2
- /* setup one handler for all GPIO interrupts */
- set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
- set_irq_data(port[0].irq, port);
-#endif
return 0;
}
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
index 8769e910e55..0376c133c9f 100644
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -12,11 +12,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-#include <mach/hardware.h>
-
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
new file mode 100644
index 00000000000..a1fd5830af4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on board-pcm038.h which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside eukrea_cpuimx27_init().
+ *
+ * This example here is for the development board. Refer
+ * eukrea_mbimx27-baseboard.c
+ */
+
+extern void eukrea_mbimx27_baseboard_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
index 06701df74c4..0cf4fa29510 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -15,12 +15,6 @@
#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
-/*
* Memory-mapped I/O on MX21ADS base board
*/
#define MX21ADS_MMIO_BASE_ADDR 0xF5000000
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index d42f4e6116f..7776d230327 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -26,12 +26,6 @@
MXC_MAX_VIRTUAL_INTS)
/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
-/*
* @name Memory Size parameters
*/
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
index a870f8ea244..ea87551d273 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -11,9 +11,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
index 552b55d714d..fec1bcfa916 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -11,9 +11,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 06e6895f7f6..2cbfa35e82f 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,9 +114,4 @@
#define MXC_MAX_EXP_IO_LINES 16
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index 78cf31e22e4..eb5a5024622 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -22,11 +22,6 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
-
#ifndef __ASSEMBLY__
enum mx31lilly_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 52fbdf2d6f2..8e64325d690 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,8 +11,5 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 303fd2434a2..d5be6b5a6ac 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,11 +19,6 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
-
#ifndef __ASSEMBLY__
enum mx31moboard_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 519bab3eb28..2bbd6ed17f5 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,11 +11,6 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
/* Definitions for components on the Debug board */
/* Base address of CPLD controller on the Debug board */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
index 1111037d6d9..383f1c04df0 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -19,9 +19,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index f0a1fa1938a..13411709b13 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,9 +19,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 4fcd7499e09..410f9786ed2 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,11 +19,6 @@
#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
-
#ifndef __ASSEMBLY__
/*
* This CPU module needs a baseboard to work. After basic initializing
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
index 15fbdf16abc..1ac4e1682e5 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -19,9 +19,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
#define __ASM_ARCH_MXC_BOARD_PCM043_H__
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 04033ec637d..6d88c7af4b2 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,11 +11,6 @@
#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
#define __ASM_ARCH_MXC_BOARD_QONG_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
/* NOR FLASH */
#define QONG_NOR_SIZE (128*1024*1024)
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 02c3cd004db..286cb9b0a25 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -16,18 +16,33 @@ struct clk;
extern void mx1_map_io(void);
extern void mx21_map_io(void);
+extern void mx25_map_io(void);
extern void mx27_map_io(void);
extern void mx31_map_io(void);
extern void mx35_map_io(void);
-extern void mxc_init_irq(void);
-extern void mxc_timer_init(struct clk *timer_clk);
+extern void mxc91231_map_io(void);
+extern void mxc_init_irq(void __iomem *);
+extern void mx1_init_irq(void);
+extern void mx21_init_irq(void);
+extern void mx25_init_irq(void);
+extern void mx27_init_irq(void);
+extern void mx31_init_irq(void);
+extern void mx35_init_irq(void);
+extern void mxc91231_init_irq(void);
+extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx25_clocks_init(unsigned long fref);
extern int mx27_clocks_init(unsigned long fref);
extern int mx31_clocks_init(unsigned long fref);
extern int mx35_clocks_init(void);
+extern int mxc91231_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_arch_reset_init(void __iomem *);
+extern void mxc91231_power_off(void);
+extern void mxc91231_arch_reset(int, const char *);
+extern void mxc91231_prepare_idle(void);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index bbc5f6753cf..15b2b148a10 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -11,52 +11,52 @@
*
*/
-#include <mach/hardware.h>
-
-#ifdef CONFIG_MACH_MX31ADS
-#include <mach/board-mx31ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM037
-#include <mach/board-pcm037.h>
-#endif
-#ifdef CONFIG_MACH_MX31LITE
-#include <mach/board-mx31lite.h>
-#endif
-#ifdef CONFIG_MACH_MX27ADS
-#include <mach/board-mx27ads.h>
-#endif
-#ifdef CONFIG_MACH_MX21ADS
-#include <mach/board-mx21ads.h>
+#ifdef CONFIG_ARCH_MX1
+#include <mach/mx1.h>
+#define UART_PADDR UART1_BASE_ADDR
+#define UART_VADDR IO_ADDRESS(UART1_BASE_ADDR)
#endif
-#ifdef CONFIG_MACH_PCM038
-#include <mach/board-pcm038.h>
+
+#ifdef CONFIG_ARCH_MX25
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#ifdef CONFIG_MACH_MX31_3DS
-#include <mach/board-mx31pdk.h>
+#include <mach/mx25.h>
+#define UART_PADDR UART1_BASE_ADDR
+#define UART_VADDR MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
#endif
-#ifdef CONFIG_MACH_QONG
-#include <mach/board-qong.h>
+
+#ifdef CONFIG_ARCH_MX2
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#ifdef CONFIG_MACH_PCM043
-#include <mach/board-pcm043.h>
+#include <mach/mx2x.h>
+#define UART_PADDR UART1_BASE_ADDR
+#define UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
#endif
-#ifdef CONFIG_MACH_MX27_3DS
-#include <mach/board-mx27pdk.h>
+
+#ifdef CONFIG_ARCH_MX3
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#ifdef CONFIG_MACH_ARMADILLO5X0
-#include <mach/board-armadillo5x0.h>
+#include <mach/mx3x.h>
+#define UART_PADDR UART1_BASE_ADDR
+#define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
#endif
-#ifdef CONFIG_MACH_MX35_3DS
-#include <mach/board-mx35pdk.h>
+
+#ifdef CONFIG_ARCH_MXC91231
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#ifdef CONFIG_MACH_MX27LITE
-#include <mach/board-mx27lite.h>
+#include <mach/mxc91231.h>
+#define UART_PADDR MXC91231_UART2_BASE_ADDR
+#define UART_VADDR MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
#endif
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
- ldreq \rx, =MXC_LL_UART_PADDR @ physical
- ldrne \rx, =MXC_LL_UART_VADDR @ virtual
+ ldreq \rx, =UART_PADDR @ physical
+ ldrne \rx, =UART_VADDR @ virtual
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 5f01d60da84..7cf290efe76 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -18,7 +18,8 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+ ldr \base, =avic_base
+ ldr \base, [\base]
#ifdef CONFIG_MXC_IRQ_PRIOR
ldr r4, [\base, #AVIC_NIMASK]
#endif
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 42e4ee37ca1..78db75475f6 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -42,6 +42,14 @@
# include <mach/mx1.h>
#endif
+#ifdef CONFIG_ARCH_MX25
+# include <mach/mx25.h>
+#endif
+
+#ifdef CONFIG_ARCH_MXC91231
+# include <mach/mxc91231.h>
+#endif
+
#include <mach/mxc.h>
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 9f0101157ec..5263506b7dd 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -2,6 +2,8 @@
* This structure describes the machine which we are running on.
*/
+#include <linux/fb.h>
+
#define PCR_TFT (1 << 31)
#define PCR_COLOR (1 << 30)
#define PCR_PBSIZ_1 (0 << 28)
@@ -13,7 +15,8 @@
#define PCR_BPIX_4 (2 << 25)
#define PCR_BPIX_8 (3 << 25)
#define PCR_BPIX_12 (4 << 25)
-#define PCR_BPIX_16 (4 << 25)
+#define PCR_BPIX_16 (5 << 25)
+#define PCR_BPIX_18 (6 << 25)
#define PCR_PIXPOL (1 << 24)
#define PCR_FLMPOL (1 << 23)
#define PCR_LPPOL (1 << 22)
@@ -46,29 +49,21 @@
#define DMACR_HM(x) (((x) & 0xf) << 16)
#define DMACR_TM(x) ((x) & 0xf)
-struct imx_fb_platform_data {
- u_long pixclock;
-
- u_short xres;
- u_short yres;
-
- u_int nonstd;
- u_char bpp;
- u_char hsync_len;
- u_char left_margin;
- u_char right_margin;
+struct imx_fb_videomode {
+ struct fb_videomode mode;
+ u32 pcr;
+ unsigned char bpp;
+};
- u_char vsync_len;
- u_char upper_margin;
- u_char lower_margin;
- u_char sync;
+struct imx_fb_platform_data {
+ struct imx_fb_videomode *mode;
+ int num_modes;
u_int cmap_greyscale:1,
cmap_inverse:1,
cmap_static:1,
unused:29;
- u_int pcr;
u_int pwmr;
u_int lscr1;
u_int dmacr;
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
new file mode 100644
index 00000000000..810c47f56e7
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -0,0 +1,517 @@
+/*
+ * arch/arm/plat-mxc/include/mach/iomux-mx25.h
+ *
+ * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
+ *
+ * based on arch/arm/mach-mx25/mx25_pins.h
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * and
+ * arch/arm/plat-mxc/include/mach/iomux-mx35.h
+ * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __IOMUX_MX25_H__
+#define __IOMUX_MX25_H__
+
+#include <mach/iomux-v3.h>
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+/*
+ *
+ * @brief MX25 I/O Pin List
+ *
+ * @ingroup GPIO_MX25
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * IOMUX/PAD Bit field definitions
+ */
+
+#define MX25_PAD_A10__A10 IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A10__GPIO_4_0 IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A13__A13 IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A13__GPIO_4_1 IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A14__A14 IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A14__GPIO_2_0 IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A15__A15 IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A15__GPIO_2_1 IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A16__A16 IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A16__GPIO_2_2 IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A17__A17 IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A17__GPIO_2_3 IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A23__A23 IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A23__GPIO_2_9 IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+
+#define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__GPIO_2_12 IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EB1__EB1 IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__AUD4_RXD IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__GPIO_2_13 IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE__OE IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__AUD4_TXC IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__GPIO_2_14 IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS0__CS0 IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS0__GPIO_4_2 IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS1__CS1 IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS1__GPIO_4_3 IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS4__CS4 IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__UART5_CTS IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__GPIO_3_20 IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS5__CS5 IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__UART5_TXD_MUX IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__GPIO_3_23 IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LBA__LBA IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__UART5_RXD_MUX IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__GPIO_3_24 IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BCLK__BCLK IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BCLK__GPIO_4_4 IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RW__RW IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__AUD4_TXFS IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__GPIO_3_25 IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWE_B__NFWE_B IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWE_B__GPIO_3_26 IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRE_B__NFRE_B IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFRE_B__GPIO_3_27 IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFALE__NFALE IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFALE__GPIO_3_28 IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFCLE__NFCLE IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFCLE__GPIO_3_29 IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWP_B__NFWP_B IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWP_B__GPIO_3_30 IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRB__NFRB IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D12__GPIO_4_8 IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D11__D11 IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D11__GPIO_4_9 IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D10__D10 IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__GPIO_4_10 IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__USBOTG_OC IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D9__D9 IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__GPIO_4_11 IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__USBH2_PWR IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_D8__D8 IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__GPIO_4_12 IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__USBH2_OC IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D7__D7 IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D7__GPIO_4_13 IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D6__D6 IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D6__GPIO_4_14 IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D5__D5 IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D5__GPIO_4_15 IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D4__D4 IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D4__GPIO_4_16 IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D3__D3 IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D3__GPIO_4_17 IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D2__D2 IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D2__GPIO_4_18 IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D1__D1 IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D1__GPIO_4_19 IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+
+#define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSYNC__VSYNC IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSYNC__GPIO_1_23 IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LSCLK__LSCLK IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LSCLK__GPIO_1_24 IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE_ACD__OE_ACD IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+
+#define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__USBH2_OC IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_CSI_D2__CSI_D2 IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__GPIO_1_27 IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D3__CSI_D3 IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D3__GPIO_1_28 IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D4__CSI_D4 IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__UART5_RTS IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__GPIO_1_29 IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D5__CSI_D5 IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D5__GPIO_1_30 IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D6__CSI_D6 IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D6__GPIO_1_31 IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D7__CSI_D7 IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D7__GPIO_1_6 IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D8__CSI_D8 IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D8__GPIO_1_7 IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D9__CSI_D9 IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D9__GPIO_4_21 IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_MCLK__GPIO_1_8 IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9 IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10 IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_CLK__GPIO_1_12 IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_DAT__GPIO_1_13 IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15 IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16 IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17 IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22 IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_UART1_RXD__GPIO_4_22 IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART1_TXD__GPIO_4_23 IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_RTS__CSI_D0 IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_RTS__GPIO_4_24 IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_CTS__CSI_D1 IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_CTS__GPIO_4_25 IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RXD__GPIO_4_26 IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA0__GPIO_2_25 IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA1__AUD7_RXD IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
+#define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW0__GPIO_2_29 IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW1__GPIO_2_30 IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW2__CSI_D0 IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW2__GPIO_2_31 IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW3__CSI_LD1 IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW3__GPIO_3_0 IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL0__GPIO_3_1 IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL1__GPIO_3_2 IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL2__GPIO_3_3 IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RTCK__RTCK IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__OWIRE IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__GPIO_3_14 IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_DE_B__DE_B IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_DE_B__GPIO_2_20 IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_TDO__TDO IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_A__GPIO_A IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_A__CAN1_TX IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_GPIO_A__USBOTG_PWR IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_GPIO_B__GPIO_B IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K)
+#define MX25_PAD_GPIO_B__USBOTG_OC IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_GPIO_C__GPIO_C IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__AUD7_TXC IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17 IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18 IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__AUD7_RXD IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__GPIO_3_19 IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CLKO__CLKO IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CLKO__GPIO_2_21 IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30 IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31 IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CTL_GRP_DVS_MISC IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_FEC IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_JTAG IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_NFC IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSI IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_WEIM IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_DDR IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CRM IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_KPP IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_SDHC1 IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_LCD IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_UART IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_NFC IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CSI IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSPI1 IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DDRTYPE IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+
+#endif // __ASSEMBLY__
+#endif // __IOMUX_MX25_H__
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 2eb182f7387..446f8676381 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -635,6 +635,19 @@ enum iomux_pins {
#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
@@ -669,6 +682,18 @@ enum iomux_pins {
#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SVEN0__GPIO2_0 IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STX0__GPIO2_1 IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRX0__GPIO2_2 IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SIMPD0__GPIO2_3 IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DTR_DCE1__GPIO2_8 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
new file mode 100644
index 00000000000..9f13061192c
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IOMUX_MXC91231_H__
+#define __MACH_IOMUX_MXC91231_H__
+
+/*
+ * various IOMUX output functions
+ */
+
+#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */
+#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */
+#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */
+#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */
+#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */
+#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */
+#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */
+#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */
+#define IOMUX_ICONFIG_NONE 0 /* not configured for input */
+#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */
+#define IOMUX_ICONFIG_FUNC 2 /* used as function */
+#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */
+#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */
+
+#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
+#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
+#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
+#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
+
+/*
+ * setups a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
+/*
+ * setups mutliple pins
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+ const char *label);
+
+/*
+ * releases a single pin:
+ * - make it available for a future use by another driver
+ * - frees the GPIO if the pin was configured as GPIO
+ * - DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_release_pin(const unsigned int pin_mode);
+/*
+ * releases multiple pins
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
+
+#define MUX_SIDE_AP (0)
+#define MUX_SIDE_SP (1)
+
+#define MUX_SIDE_SHIFT (26)
+#define MUX_SIDE_MASK (0x1 << MUX_SIDE_SHIFT)
+
+#define MUX_GPIO_PORT_SHIFT (23)
+#define MUX_GPIO_PORT_MASK (0x7 << MUX_GPIO_PORT_SHIFT)
+
+#define MUX_GPIO_PIN_SHIFT (20)
+#define MUX_GPIO_PIN_MASK (0x1f << MUX_GPIO_PIN_SHIFT)
+
+#define MUX_REG_SHIFT (15)
+#define MUX_REG_MASK (0x1f << MUX_REG_SHIFT)
+
+#define MUX_FIELD_SHIFT (13)
+#define MUX_FIELD_MASK (0x3 << MUX_FIELD_SHIFT)
+
+#define MUX_PADGRP_SHIFT (8)
+#define MUX_PADGRP_MASK (0x1f << MUX_PADGRP_SHIFT)
+
+#define MUX_PIN_MASK (0xffffff << 8)
+
+#define GPIO_PORT_MAX (3)
+
+#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \
+ (((side) << MUX_SIDE_SHIFT) | \
+ (gport << MUX_GPIO_PORT_SHIFT) | \
+ ((gpin) << MUX_GPIO_PIN_SHIFT) | \
+ ((ctlreg) << MUX_REG_SHIFT) | \
+ ((ctlfield) << MUX_FIELD_SHIFT) | \
+ ((padgrp) << MUX_PADGRP_SHIFT))
+
+#define MUX_MODE_OUT_SHIFT (4)
+#define MUX_MODE_IN_SHIFT (0)
+#define MUX_MODE_SHIFT (0)
+#define MUX_MODE_MASK (0xff << MUX_MODE_SHIFT)
+
+#define IOMUX_MODE(pin, mode) \
+ (pin | (mode << MUX_MODE_SHIFT))
+
+enum iomux_pins {
+ /* AP Side pins */
+ MXC91231_PIN_AP_CLE = IOMUX_PIN(0, 0, 0, 0, 0, 24),
+ MXC91231_PIN_AP_ALE = IOMUX_PIN(0, 0, 1, 0, 1, 24),
+ MXC91231_PIN_AP_CE_B = IOMUX_PIN(0, 0, 2, 0, 2, 24),
+ MXC91231_PIN_AP_RE_B = IOMUX_PIN(0, 0, 3, 0, 3, 24),
+ MXC91231_PIN_AP_WE_B = IOMUX_PIN(0, 0, 4, 1, 0, 24),
+ MXC91231_PIN_AP_WP_B = IOMUX_PIN(0, 0, 5, 1, 1, 24),
+ MXC91231_PIN_AP_BSY_B = IOMUX_PIN(0, 0, 6, 1, 2, 24),
+ MXC91231_PIN_AP_U1_TXD = IOMUX_PIN(0, 0, 7, 1, 3, 28),
+ MXC91231_PIN_AP_U1_RXD = IOMUX_PIN(0, 0, 8, 2, 0, 28),
+ MXC91231_PIN_AP_U1_RTS_B = IOMUX_PIN(0, 0, 9, 2, 1, 28),
+ MXC91231_PIN_AP_U1_CTS_B = IOMUX_PIN(0, 0, 10, 2, 2, 28),
+ MXC91231_PIN_AP_AD1_TXD = IOMUX_PIN(0, 0, 11, 2, 3, 9),
+ MXC91231_PIN_AP_AD1_RXD = IOMUX_PIN(0, 0, 12, 3, 0, 9),
+ MXC91231_PIN_AP_AD1_TXC = IOMUX_PIN(0, 0, 13, 3, 1, 9),
+ MXC91231_PIN_AP_AD1_TXFS = IOMUX_PIN(0, 0, 14, 3, 2, 9),
+ MXC91231_PIN_AP_AD2_TXD = IOMUX_PIN(0, 0, 15, 3, 3, 9),
+ MXC91231_PIN_AP_AD2_RXD = IOMUX_PIN(0, 0, 16, 4, 0, 9),
+ MXC91231_PIN_AP_AD2_TXC = IOMUX_PIN(0, 0, 17, 4, 1, 9),
+ MXC91231_PIN_AP_AD2_TXFS = IOMUX_PIN(0, 0, 18, 4, 2, 9),
+ MXC91231_PIN_AP_OWDAT = IOMUX_PIN(0, 0, 19, 4, 3, 28),
+ MXC91231_PIN_AP_IPU_LD17 = IOMUX_PIN(0, 0, 20, 5, 0, 28),
+ MXC91231_PIN_AP_IPU_D3_VSYNC = IOMUX_PIN(0, 0, 21, 5, 1, 28),
+ MXC91231_PIN_AP_IPU_D3_HSYNC = IOMUX_PIN(0, 0, 22, 5, 2, 28),
+ MXC91231_PIN_AP_IPU_D3_CLK = IOMUX_PIN(0, 0, 23, 5, 3, 28),
+ MXC91231_PIN_AP_IPU_D3_DRDY = IOMUX_PIN(0, 0, 24, 6, 0, 28),
+ MXC91231_PIN_AP_IPU_D3_CONTR = IOMUX_PIN(0, 0, 25, 6, 1, 28),
+ MXC91231_PIN_AP_IPU_D0_CS = IOMUX_PIN(0, 0, 26, 6, 2, 28),
+ MXC91231_PIN_AP_IPU_LD16 = IOMUX_PIN(0, 0, 27, 6, 3, 28),
+ MXC91231_PIN_AP_IPU_D2_CS = IOMUX_PIN(0, 0, 28, 7, 0, 28),
+ MXC91231_PIN_AP_IPU_PAR_RS = IOMUX_PIN(0, 0, 29, 7, 1, 28),
+ MXC91231_PIN_AP_IPU_D3_PS = IOMUX_PIN(0, 0, 30, 7, 2, 28),
+ MXC91231_PIN_AP_IPU_D3_CLS = IOMUX_PIN(0, 0, 31, 7, 3, 28),
+ MXC91231_PIN_AP_IPU_RD = IOMUX_PIN(0, 1, 0, 8, 0, 28),
+ MXC91231_PIN_AP_IPU_WR = IOMUX_PIN(0, 1, 1, 8, 1, 28),
+ MXC91231_PIN_AP_IPU_LD0 = IOMUX_PIN(0, 7, 0, 8, 2, 28),
+ MXC91231_PIN_AP_IPU_LD1 = IOMUX_PIN(0, 7, 0, 8, 3, 28),
+ MXC91231_PIN_AP_IPU_LD2 = IOMUX_PIN(0, 7, 0, 9, 0, 28),
+ MXC91231_PIN_AP_IPU_LD3 = IOMUX_PIN(0, 1, 2, 9, 1, 28),
+ MXC91231_PIN_AP_IPU_LD4 = IOMUX_PIN(0, 1, 3, 9, 2, 28),
+ MXC91231_PIN_AP_IPU_LD5 = IOMUX_PIN(0, 1, 4, 9, 3, 28),
+ MXC91231_PIN_AP_IPU_LD6 = IOMUX_PIN(0, 1, 5, 10, 0, 28),
+ MXC91231_PIN_AP_IPU_LD7 = IOMUX_PIN(0, 1, 6, 10, 1, 28),
+ MXC91231_PIN_AP_IPU_LD8 = IOMUX_PIN(0, 1, 7, 10, 2, 28),
+ MXC91231_PIN_AP_IPU_LD9 = IOMUX_PIN(0, 1, 8, 10, 3, 28),
+ MXC91231_PIN_AP_IPU_LD10 = IOMUX_PIN(0, 1, 9, 11, 0, 28),
+ MXC91231_PIN_AP_IPU_LD11 = IOMUX_PIN(0, 1, 10, 11, 1, 28),
+ MXC91231_PIN_AP_IPU_LD12 = IOMUX_PIN(0, 1, 11, 11, 2, 28),
+ MXC91231_PIN_AP_IPU_LD13 = IOMUX_PIN(0, 1, 12, 11, 3, 28),
+ MXC91231_PIN_AP_IPU_LD14 = IOMUX_PIN(0, 1, 13, 12, 0, 28),
+ MXC91231_PIN_AP_IPU_LD15 = IOMUX_PIN(0, 1, 14, 12, 1, 28),
+ MXC91231_PIN_AP_KPROW4 = IOMUX_PIN(0, 7, 0, 12, 2, 10),
+ MXC91231_PIN_AP_KPROW5 = IOMUX_PIN(0, 1, 16, 12, 3, 10),
+ MXC91231_PIN_AP_GPIO_AP_B17 = IOMUX_PIN(0, 1, 17, 13, 0, 10),
+ MXC91231_PIN_AP_GPIO_AP_B18 = IOMUX_PIN(0, 1, 18, 13, 1, 10),
+ MXC91231_PIN_AP_KPCOL3 = IOMUX_PIN(0, 1, 19, 13, 2, 11),
+ MXC91231_PIN_AP_KPCOL4 = IOMUX_PIN(0, 1, 20, 13, 3, 11),
+ MXC91231_PIN_AP_KPCOL5 = IOMUX_PIN(0, 1, 21, 14, 0, 11),
+ MXC91231_PIN_AP_GPIO_AP_B22 = IOMUX_PIN(0, 1, 22, 14, 1, 11),
+ MXC91231_PIN_AP_GPIO_AP_B23 = IOMUX_PIN(0, 1, 23, 14, 2, 11),
+ MXC91231_PIN_AP_CSI_D0 = IOMUX_PIN(0, 1, 24, 14, 3, 21),
+ MXC91231_PIN_AP_CSI_D1 = IOMUX_PIN(0, 1, 25, 15, 0, 21),
+ MXC91231_PIN_AP_CSI_D2 = IOMUX_PIN(0, 1, 26, 15, 1, 21),
+ MXC91231_PIN_AP_CSI_D3 = IOMUX_PIN(0, 1, 27, 15, 2, 21),
+ MXC91231_PIN_AP_CSI_D4 = IOMUX_PIN(0, 1, 28, 15, 3, 21),
+ MXC91231_PIN_AP_CSI_D5 = IOMUX_PIN(0, 1, 29, 16, 0, 21),
+ MXC91231_PIN_AP_CSI_D6 = IOMUX_PIN(0, 1, 30, 16, 1, 21),
+ MXC91231_PIN_AP_CSI_D7 = IOMUX_PIN(0, 1, 31, 16, 2, 21),
+ MXC91231_PIN_AP_CSI_D8 = IOMUX_PIN(0, 2, 0, 16, 3, 21),
+ MXC91231_PIN_AP_CSI_D9 = IOMUX_PIN(0, 2, 1, 17, 0, 21),
+ MXC91231_PIN_AP_CSI_MCLK = IOMUX_PIN(0, 2, 2, 17, 1, 21),
+ MXC91231_PIN_AP_CSI_VSYNC = IOMUX_PIN(0, 2, 3, 17, 2, 21),
+ MXC91231_PIN_AP_CSI_HSYNC = IOMUX_PIN(0, 2, 4, 17, 3, 21),
+ MXC91231_PIN_AP_CSI_PIXCLK = IOMUX_PIN(0, 2, 5, 18, 0, 21),
+ MXC91231_PIN_AP_I2CLK = IOMUX_PIN(0, 2, 6, 18, 1, 12),
+ MXC91231_PIN_AP_I2DAT = IOMUX_PIN(0, 2, 7, 18, 2, 12),
+ MXC91231_PIN_AP_GPIO_AP_C8 = IOMUX_PIN(0, 2, 8, 18, 3, 9),
+ MXC91231_PIN_AP_GPIO_AP_C9 = IOMUX_PIN(0, 2, 9, 19, 0, 9),
+ MXC91231_PIN_AP_GPIO_AP_C10 = IOMUX_PIN(0, 2, 10, 19, 1, 9),
+ MXC91231_PIN_AP_GPIO_AP_C11 = IOMUX_PIN(0, 2, 11, 19, 2, 9),
+ MXC91231_PIN_AP_GPIO_AP_C12 = IOMUX_PIN(0, 2, 12, 19, 3, 9),
+ MXC91231_PIN_AP_GPIO_AP_C13 = IOMUX_PIN(0, 2, 13, 20, 0, 28),
+ MXC91231_PIN_AP_GPIO_AP_C14 = IOMUX_PIN(0, 2, 14, 20, 1, 28),
+ MXC91231_PIN_AP_GPIO_AP_C15 = IOMUX_PIN(0, 2, 15, 20, 2, 9),
+ MXC91231_PIN_AP_GPIO_AP_C16 = IOMUX_PIN(0, 2, 16, 20, 3, 9),
+ MXC91231_PIN_AP_GPIO_AP_C17 = IOMUX_PIN(0, 2, 17, 21, 0, 9),
+ MXC91231_PIN_AP_ED_INT0 = IOMUX_PIN(0, 2, 18, 21, 1, 22),
+ MXC91231_PIN_AP_ED_INT1 = IOMUX_PIN(0, 2, 19, 21, 2, 22),
+ MXC91231_PIN_AP_ED_INT2 = IOMUX_PIN(0, 2, 20, 21, 3, 22),
+ MXC91231_PIN_AP_ED_INT3 = IOMUX_PIN(0, 2, 21, 22, 0, 22),
+ MXC91231_PIN_AP_ED_INT4 = IOMUX_PIN(0, 2, 22, 22, 1, 23),
+ MXC91231_PIN_AP_ED_INT5 = IOMUX_PIN(0, 2, 23, 22, 2, 23),
+ MXC91231_PIN_AP_ED_INT6 = IOMUX_PIN(0, 2, 24, 22, 3, 23),
+ MXC91231_PIN_AP_ED_INT7 = IOMUX_PIN(0, 2, 25, 23, 0, 23),
+ MXC91231_PIN_AP_U2_DSR_B = IOMUX_PIN(0, 2, 26, 23, 1, 28),
+ MXC91231_PIN_AP_U2_RI_B = IOMUX_PIN(0, 2, 27, 23, 2, 28),
+ MXC91231_PIN_AP_U2_CTS_B = IOMUX_PIN(0, 2, 28, 23, 3, 28),
+ MXC91231_PIN_AP_U2_DTR_B = IOMUX_PIN(0, 2, 29, 24, 0, 28),
+ MXC91231_PIN_AP_KPROW0 = IOMUX_PIN(0, 7, 0, 24, 1, 10),
+ MXC91231_PIN_AP_KPROW1 = IOMUX_PIN(0, 1, 15, 24, 2, 10),
+ MXC91231_PIN_AP_KPROW2 = IOMUX_PIN(0, 7, 0, 24, 3, 10),
+ MXC91231_PIN_AP_KPROW3 = IOMUX_PIN(0, 7, 0, 25, 0, 10),
+ MXC91231_PIN_AP_KPCOL0 = IOMUX_PIN(0, 7, 0, 25, 1, 11),
+ MXC91231_PIN_AP_KPCOL1 = IOMUX_PIN(0, 7, 0, 25, 2, 11),
+ MXC91231_PIN_AP_KPCOL2 = IOMUX_PIN(0, 7, 0, 25, 3, 11),
+
+ /* Shared pins */
+ MXC91231_PIN_SP_U3_TXD = IOMUX_PIN(1, 3, 0, 0, 0, 28),
+ MXC91231_PIN_SP_U3_RXD = IOMUX_PIN(1, 3, 1, 0, 1, 28),
+ MXC91231_PIN_SP_U3_RTS_B = IOMUX_PIN(1, 3, 2, 0, 2, 28),
+ MXC91231_PIN_SP_U3_CTS_B = IOMUX_PIN(1, 3, 3, 0, 3, 28),
+ MXC91231_PIN_SP_USB_TXOE_B = IOMUX_PIN(1, 3, 4, 1, 0, 28),
+ MXC91231_PIN_SP_USB_DAT_VP = IOMUX_PIN(1, 3, 5, 1, 1, 28),
+ MXC91231_PIN_SP_USB_SE0_VM = IOMUX_PIN(1, 3, 6, 1, 2, 28),
+ MXC91231_PIN_SP_USB_RXD = IOMUX_PIN(1, 3, 7, 1, 3, 28),
+ MXC91231_PIN_SP_UH2_TXOE_B = IOMUX_PIN(1, 3, 8, 2, 0, 28),
+ MXC91231_PIN_SP_UH2_SPEED = IOMUX_PIN(1, 3, 9, 2, 1, 28),
+ MXC91231_PIN_SP_UH2_SUSPEN = IOMUX_PIN(1, 3, 10, 2, 2, 28),
+ MXC91231_PIN_SP_UH2_TXDP = IOMUX_PIN(1, 3, 11, 2, 3, 28),
+ MXC91231_PIN_SP_UH2_RXDP = IOMUX_PIN(1, 3, 12, 3, 0, 28),
+ MXC91231_PIN_SP_UH2_RXDM = IOMUX_PIN(1, 3, 13, 3, 1, 28),
+ MXC91231_PIN_SP_UH2_OVR = IOMUX_PIN(1, 3, 14, 3, 2, 28),
+ MXC91231_PIN_SP_UH2_PWR = IOMUX_PIN(1, 3, 15, 3, 3, 28),
+ MXC91231_PIN_SP_SD1_DAT0 = IOMUX_PIN(1, 3, 16, 4, 0, 25),
+ MXC91231_PIN_SP_SD1_DAT1 = IOMUX_PIN(1, 3, 17, 4, 1, 25),
+ MXC91231_PIN_SP_SD1_DAT2 = IOMUX_PIN(1, 3, 18, 4, 2, 25),
+ MXC91231_PIN_SP_SD1_DAT3 = IOMUX_PIN(1, 3, 19, 4, 3, 25),
+ MXC91231_PIN_SP_SD1_CMD = IOMUX_PIN(1, 3, 20, 5, 0, 25),
+ MXC91231_PIN_SP_SD1_CLK = IOMUX_PIN(1, 3, 21, 5, 1, 25),
+ MXC91231_PIN_SP_SD2_DAT0 = IOMUX_PIN(1, 3, 22, 5, 2, 26),
+ MXC91231_PIN_SP_SD2_DAT1 = IOMUX_PIN(1, 3, 23, 5, 3, 26),
+ MXC91231_PIN_SP_SD2_DAT2 = IOMUX_PIN(1, 3, 24, 6, 0, 26),
+ MXC91231_PIN_SP_SD2_DAT3 = IOMUX_PIN(1, 3, 25, 6, 1, 26),
+ MXC91231_PIN_SP_GPIO_SP_A26 = IOMUX_PIN(1, 3, 26, 6, 2, 28),
+ MXC91231_PIN_SP_SPI1_CLK = IOMUX_PIN(1, 3, 27, 6, 3, 13),
+ MXC91231_PIN_SP_SPI1_MOSI = IOMUX_PIN(1, 3, 28, 7, 0, 13),
+ MXC91231_PIN_SP_SPI1_MISO = IOMUX_PIN(1, 3, 29, 7, 1, 13),
+ MXC91231_PIN_SP_SPI1_SS0 = IOMUX_PIN(1, 3, 30, 7, 2, 13),
+ MXC91231_PIN_SP_SPI1_SS1 = IOMUX_PIN(1, 3, 31, 7, 3, 13),
+ MXC91231_PIN_SP_SD2_CMD = IOMUX_PIN(1, 7, 0, 8, 0, 26),
+ MXC91231_PIN_SP_SD2_CLK = IOMUX_PIN(1, 7, 0, 8, 1, 26),
+ MXC91231_PIN_SP_SIM1_RST_B = IOMUX_PIN(1, 2, 30, 8, 2, 28),
+ MXC91231_PIN_SP_SIM1_SVEN = IOMUX_PIN(1, 7, 0, 8, 3, 28),
+ MXC91231_PIN_SP_SIM1_CLK = IOMUX_PIN(1, 7, 0, 9, 0, 28),
+ MXC91231_PIN_SP_SIM1_TRXD = IOMUX_PIN(1, 7, 0, 9, 1, 28),
+ MXC91231_PIN_SP_SIM1_PD = IOMUX_PIN(1, 2, 31, 9, 2, 28),
+ MXC91231_PIN_SP_UH2_TXDM = IOMUX_PIN(1, 7, 0, 9, 3, 28),
+ MXC91231_PIN_SP_UH2_RXD = IOMUX_PIN(1, 7, 0, 10, 0, 28),
+};
+
+#define PIN_AP_MAX (104)
+#define PIN_SP_MAX (41)
+
+#define PIN_MAX (PIN_AP_MAX + PIN_SP_MAX)
+
+/*
+ * Convenience values for use with mxc_iomux_mode()
+ *
+ * Format here is MXC91231_PIN_(pin name)__(function)
+ */
+
+#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \
+ IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \
+ IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \
+ IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1)
+#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \
+ IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1)
+
+
+#endif /* __MACH_IOMUX_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 7cd84547658..a0fa4026546 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -68,28 +68,24 @@ struct pad_desc {
/*
* Use to set PAD control
*/
-#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0
-#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1
-#define PAD_CTL_NO_HYSTERESIS 0
-#define PAD_CTL_HYSTERESIS 1
+#define PAD_CTL_DVS (1 << 13)
+#define PAD_CTL_HYS (1 << 8)
-#define PAD_CTL_PULL_DISABLED 0x0
-#define PAD_CTL_PULL_KEEPER 0xa
-#define PAD_CTL_PULL_DOWN_100K 0xc
-#define PAD_CTL_PULL_UP_47K 0xd
-#define PAD_CTL_PULL_UP_100K 0xe
-#define PAD_CTL_PULL_UP_22K 0xf
+#define PAD_CTL_PKE (1 << 7)
+#define PAD_CTL_PUE (1 << 6)
+#define PAD_CTL_PUS_100K_DOWN (0 << 4)
+#define PAD_CTL_PUS_47K_UP (1 << 4)
+#define PAD_CTL_PUS_100K_UP (2 << 4)
+#define PAD_CTL_PUS_22K_UP (3 << 4)
-#define PAD_CTL_OUTPUT_CMOS 0
-#define PAD_CTL_OUTPUT_OPEN_DRAIN 1
+#define PAD_CTL_ODE (1 << 3)
-#define PAD_CTL_DRIVE_STRENGTH_NORM 0
-#define PAD_CTL_DRIVE_STRENGTH_HIGH 1
-#define PAD_CTL_DRIVE_STRENGTH_MAX 2
+#define PAD_CTL_DSE_STANDARD (0 << 1)
+#define PAD_CTL_DSE_HIGH (1 << 1)
+#define PAD_CTL_DSE_MAX (2 << 1)
-#define PAD_CTL_SLEW_RATE_SLOW 0
-#define PAD_CTL_SLEW_RATE_FAST 1
+#define PAD_CTL_SRE_FAST (1 << 0)
/*
* setups a single pad:
@@ -117,5 +113,10 @@ void mxc_iomux_v3_release_pad(struct pad_desc *pad);
*/
void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
+/*
+ * Initialise the iomux controller
+ */
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
+
#endif /* __MACH_IOMUX_V3_H__*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 171f8adc110..6d49f8ae325 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -49,6 +49,9 @@
#ifdef CONFIG_ARCH_MX2
# define GPIO_PORT_MAX 5
#endif
+#ifdef CONFIG_ARCH_MX25
+# define GPIO_PORT_MAX 3
+#endif
#ifndef GPIO_PORT_MAX
# error "GPIO config port count unknown!"
@@ -107,6 +110,9 @@
#include <mach/iomux-mx27.h>
#endif
#endif
+#ifdef CONFIG_ARCH_MX25
+#include <mach/iomux-mx25.h>
+#endif
/* decode irq number to use with IMR(x), ISR(x) and friends */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 518a36504b8..ead9d592168 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -24,6 +24,10 @@
#define MXC_GPIO_IRQS (32 * 6)
#elif defined CONFIG_ARCH_MX3
#define MXC_GPIO_IRQS (32 * 3)
+#elif defined CONFIG_ARCH_MX25
+#define MXC_GPIO_IRQS (32 * 4)
+#elif defined CONFIG_ARCH_MXC91231
+#define MXC_GPIO_IRQS (32 * 4)
#endif
/*
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 6065e00176e..d3afafdcc0e 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -22,6 +22,10 @@
#endif
#elif defined CONFIG_ARCH_MX3
#define PHYS_OFFSET UL(0x80000000)
+#elif defined CONFIG_ARCH_MX25
+#define PHYS_OFFSET UL(0x80000000)
+#elif defined CONFIG_ARCH_MXC91231
+#define PHYS_OFFSET UL(0x90000000)
#endif
#if defined(CONFIG_MX1_VIDEO)
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1000bf330bc..1b2890a5c45 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -12,10 +12,6 @@
#ifndef __ASM_ARCH_MXC_MX1_H__
#define __ASM_ARCH_MXC_MX1_H__
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
#include <mach/vmalloc.h>
/*
@@ -138,20 +134,6 @@
#define GPIO_INT_PORTD 62
#define WDT_INT 63
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR 0x1C
-#define GPIO_GDIR 0x00
-#define GPIO_PSR 0x24
-#define GPIO_ICR1 0x28
-#define GPIO_ICR2 0x2C
-#define GPIO_IMR 0x30
-#define GPIO_ISR 0x34
-#define GPIO_INT_LOW_LEV 0x3
-#define GPIO_INT_HIGH_LEV 0x2
-#define GPIO_INT_RISE_EDGE 0x0
-#define GPIO_INT_FALL_EDGE 0x1
-#define GPIO_INT_NONE 0x4
-
/* DMA */
#define DMA_REQ_UART3_T 2
#define DMA_REQ_UART3_R 3
@@ -179,8 +161,4 @@
#define DMA_REQ_UART1_T 30
#define DMA_REQ_UART1_R 31
-/* mandatory for CONFIG_DEBUG_LL */
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 8b070a041a9..21112c695ec 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -25,11 +25,6 @@
#ifndef __ASM_ARCH_MXC_MX21_H__
#define __ASM_ARCH_MXC_MX21_H__
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-
/* Memory regions and CS */
#define SDRAM_BASE_ADDR 0xC0000000
#define CSD1_BASE_ADDR 0xC4000000
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
new file mode 100644
index 00000000000..ec64bd9a8ab
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -0,0 +1,44 @@
+#ifndef __MACH_MX25_H__
+#define __MACH_MX25_H__
+
+#define MX25_AIPS1_BASE_ADDR 0x43F00000
+#define MX25_AIPS1_BASE_ADDR_VIRT 0xFC000000
+#define MX25_AIPS1_SIZE SZ_1M
+#define MX25_AIPS2_BASE_ADDR 0x53F00000
+#define MX25_AIPS2_BASE_ADDR_VIRT 0xFC200000
+#define MX25_AIPS2_SIZE SZ_1M
+#define MX25_AVIC_BASE_ADDR 0x68000000
+#define MX25_AVIC_BASE_ADDR_VIRT 0xFC400000
+#define MX25_AVIC_SIZE SZ_1M
+
+#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000)
+
+#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000)
+#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000)
+#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000)
+
+#define MX25_GPIO1_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000)
+#define MX25_GPIO2_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000)
+#define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
+#define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
+
+#define MX25_AIPS1_IO_ADDRESS(x) \
+ (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+#define MX25_AIPS2_IO_ADDRESS(x) \
+ (((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
+#define MX25_AVIC_IO_ADDRESS(x) \
+ (((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+
+#define __in_range(addr, name) ((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
+
+#define MX25_IO_ADDRESS(x) \
+ (void __force __iomem *) \
+ (__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) : \
+ __in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) : \
+ __in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) : \
+ 0xDEADBEEF)
+
+#define UART1_BASE_ADDR 0x43f90000
+#define UART2_BASE_ADDR 0x43f94000
+
+#endif /* __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 6e93f2c0b7b..dc3ad9aa952 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,10 +24,6 @@
#ifndef __ASM_ARCH_MXC_MX27_H__
#define __ASM_ARCH_MXC_MX27_H__
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
/* IRAM */
#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */
@@ -120,7 +116,4 @@ extern int mx27_revision(void);
/* Mandatory defines used globally */
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS (192 + 16)
-
#endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index fc40d3ab8c5..db5d921e0fe 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -23,10 +23,6 @@
#ifndef __ASM_ARCH_MXC_MX2x_H__
#define __ASM_ARCH_MXC_MX2x_H__
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
/* The following addresses are common between i.MX21 and i.MX27 */
/* Register offests */
@@ -154,20 +150,6 @@
#define MXC_INT_GPIO 8
#define MXC_INT_CSPI3 6
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR 0x1C
-#define GPIO_GDIR 0x00
-#define GPIO_PSR 0x24
-#define GPIO_ICR1 0x28
-#define GPIO_ICR2 0x2C
-#define GPIO_IMR 0x30
-#define GPIO_ISR 0x34
-#define GPIO_INT_LOW_LEV 0x3
-#define GPIO_INT_HIGH_LEV 0x2
-#define GPIO_INT_RISE_EDGE 0x0
-#define GPIO_INT_FALL_EDGE 0x1
-#define GPIO_INT_NONE 0x4
-
/* fixed DMA request numbers */
#define DMA_REQ_CSI_RX 31
#define DMA_REQ_CSI_STAT 30
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 0b06941b613..14ac0dcc82f 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -4,7 +4,7 @@
#define MX31_IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */
#define MX31_IRAM_SIZE SZ_16K
-#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000)
+#define MX31_OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000)
#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000)
#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000)
#define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000)
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 6465fefb42e..ab4cfec6c8a 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -5,6 +5,7 @@
#define MX35_IRAM_SIZE SZ_128K
#define MXC_FEC_BASE_ADDR 0x50038000
+#define MX35_OTG_BASE_ADDR 0x53ff4000
#define MX35_NFC_BASE_ADDR 0xBB000000
/*
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index b559a4bb576..009f4440276 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -11,10 +11,6 @@
#ifndef __ASM_ARCH_MXC_MX31_H__
#define __ASM_ARCH_MXC_MX31_H__
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
/*
* MX31 memory map:
*
@@ -263,25 +259,8 @@
#define SYSTEM_REV_MIN CHIP_REV_1_0
#define SYSTEM_REV_NUM 3
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR 0x00
-#define GPIO_GDIR 0x04
-#define GPIO_PSR 0x08
-#define GPIO_ICR1 0x0C
-#define GPIO_ICR2 0x10
-#define GPIO_IMR 0x14
-#define GPIO_ISR 0x18
-#define GPIO_INT_LOW_LEV 0x0
-#define GPIO_INT_HIGH_LEV 0x1
-#define GPIO_INT_RISE_EDGE 0x2
-#define GPIO_INT_FALL_EDGE 0x3
-#define GPIO_INT_NONE 0x4
-
/* Mandatory defines used globally */
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS 96
-
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern unsigned int system_rev;
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 5fa2a07f4ea..51990536b84 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -26,9 +26,11 @@
#define MXC_CPU_MX1 1
#define MXC_CPU_MX21 21
+#define MXC_CPU_MX25 25
#define MXC_CPU_MX27 27
#define MXC_CPU_MX31 31
#define MXC_CPU_MX35 35
+#define MXC_CPU_MXC91231 91231
#ifndef __ASSEMBLY__
extern unsigned int __mxc_cpu_type;
@@ -58,6 +60,18 @@ extern unsigned int __mxc_cpu_type;
# define cpu_is_mx21() (0)
#endif
+#ifdef CONFIG_ARCH_MX25
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX25
+# endif
+# define cpu_is_mx25() (mxc_cpu_type == MXC_CPU_MX25)
+#else
+# define cpu_is_mx25() (0)
+#endif
+
#ifdef CONFIG_MACH_MX27
# ifdef mxc_cpu_type
# undef mxc_cpu_type
@@ -94,13 +108,25 @@ extern unsigned int __mxc_cpu_type;
# define cpu_is_mx35() (0)
#endif
+#ifdef CONFIG_ARCH_MXC91231
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MXC91231
+# endif
+# define cpu_is_mxc91231() (mxc_cpu_type == MXC_CPU_MXC91231)
+#else
+# define cpu_is_mxc91231() (0)
+#endif
+
#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
#endif
-#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27())
#endif /* __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
new file mode 100644
index 00000000000..81484d1ef23
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -0,0 +1,315 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - Platform specific register memory map
+ *
+ * Copyright 2005-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __MACH_MXC91231_H__
+#define __MACH_MXC91231_H__
+
+/*
+ * L2CC
+ */
+#define MXC91231_L2CC_BASE_ADDR 0x30000000
+#define MXC91231_L2CC_BASE_ADDR_VIRT 0xF9000000
+#define MXC91231_L2CC_SIZE SZ_64K
+
+/*
+ * AIPS 1
+ */
+#define MXC91231_AIPS1_BASE_ADDR 0x43F00000
+#define MXC91231_AIPS1_BASE_ADDR_VIRT 0xFC000000
+#define MXC91231_AIPS1_SIZE SZ_1M
+
+#define MXC91231_AIPS1_CTRL_BASE_ADDR MXC91231_AIPS1_BASE_ADDR
+#define MXC91231_MAX_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x04000)
+#define MXC91231_EVTMON_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x08000)
+#define MXC91231_CLKCTL_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x0C000)
+#define MXC91231_ETB_SLOT4_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x10000)
+#define MXC91231_ETB_SLOT5_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x14000)
+#define MXC91231_ECT_CTIO_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x18000)
+#define MXC91231_I2C_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x80000)
+#define MXC91231_MU_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x88000)
+#define MXC91231_UART1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x90000)
+#define MXC91231_UART2_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x94000)
+#define MXC91231_DSM_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x98000)
+#define MXC91231_OWIRE_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x9C000)
+#define MXC91231_SSI1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA0000)
+#define MXC91231_KPP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA8000)
+#define MXC91231_IOMUX_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xAC000)
+#define MXC91231_CTI_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xB8000)
+
+/*
+ * AIPS 2
+ */
+#define MXC91231_AIPS2_BASE_ADDR 0x53F00000
+#define MXC91231_AIPS2_BASE_ADDR_VIRT 0xFC100000
+#define MXC91231_AIPS2_SIZE SZ_1M
+
+#define MXC91231_GEMK_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x8C000)
+#define MXC91231_GPT1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x90000)
+#define MXC91231_EPIT1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x94000)
+#define MXC91231_SCC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xAC000)
+#define MXC91231_RNGA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xB0000)
+#define MXC91231_IPU_CTRL_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC0000)
+#define MXC91231_AUDMUX_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC4000)
+#define MXC91231_EDIO_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC8000)
+#define MXC91231_GPIO1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xCC000)
+#define MXC91231_GPIO2_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD0000)
+#define MXC91231_SDMA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD4000)
+#define MXC91231_RTC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD8000)
+#define MXC91231_WDOG1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xDC000)
+#define MXC91231_PWM_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE0000)
+#define MXC91231_GPIO3_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE4000)
+#define MXC91231_WDOG2_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE8000)
+#define MXC91231_RTIC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xEC000)
+#define MXC91231_LPMC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xF0000)
+
+/*
+ * SPBA global module 0
+ */
+#define MXC91231_SPBA0_BASE_ADDR 0x50000000
+#define MXC91231_SPBA0_BASE_ADDR_VIRT 0xFC200000
+#define MXC91231_SPBA0_SIZE SZ_1M
+
+#define MXC91231_MMC_SDHC1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x04000)
+#define MXC91231_MMC_SDHC2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x08000)
+#define MXC91231_UART3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x0C000)
+#define MXC91231_CSPI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x10000)
+#define MXC91231_SSI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x14000)
+#define MXC91231_SIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x18000)
+#define MXC91231_IIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x1C000)
+#define MXC91231_CTI_SDMA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x20000)
+#define MXC91231_USBOTG_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x24000)
+#define MXC91231_USBOTG_DATA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x28000)
+#define MXC91231_CSPI1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x30000)
+#define MXC91231_SPBA_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x3C000)
+#define MXC91231_IOMUX_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x40000)
+#define MXC91231_CRM_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x44000)
+#define MXC91231_CRM_AP_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x48000)
+#define MXC91231_PLL0_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x4C000)
+#define MXC91231_PLL1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x50000)
+#define MXC91231_PLL2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x54000)
+#define MXC91231_GPIO4_SH_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x58000)
+#define MXC91231_HAC_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_SAHARA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_PLL3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x60000)
+
+/*
+ * SPBA global module 1
+ */
+#define MXC91231_SPBA1_BASE_ADDR 0x52000000
+#define MXC91231_SPBA1_BASE_ADDR_VIRT 0xFC300000
+#define MXC91231_SPBA1_SIZE SZ_1M
+
+#define MXC91231_MQSPI_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x34000)
+#define MXC91231_EL1T_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x38000)
+
+/*!
+ * Defines for SPBA modules
+ */
+#define MXC91231_SPBA_SDHC1 0x04
+#define MXC91231_SPBA_SDHC2 0x08
+#define MXC91231_SPBA_UART3 0x0C
+#define MXC91231_SPBA_CSPI2 0x10
+#define MXC91231_SPBA_SSI2 0x14
+#define MXC91231_SPBA_SIM 0x18
+#define MXC91231_SPBA_IIM 0x1C
+#define MXC91231_SPBA_CTI_SDMA 0x20
+#define MXC91231_SPBA_USBOTG_CTRL_REGS 0x24
+#define MXC91231_SPBA_USBOTG_DATA_REGS 0x28
+#define MXC91231_SPBA_CSPI1 0x30
+#define MXC91231_SPBA_MQSPI 0x34
+#define MXC91231_SPBA_EL1T 0x38
+#define MXC91231_SPBA_IOMUX 0x40
+#define MXC91231_SPBA_CRM_COM 0x44
+#define MXC91231_SPBA_CRM_AP 0x48
+#define MXC91231_SPBA_PLL0 0x4C
+#define MXC91231_SPBA_PLL1 0x50
+#define MXC91231_SPBA_PLL2 0x54
+#define MXC91231_SPBA_GPIO4 0x58
+#define MXC91231_SPBA_SAHARA 0x5C
+
+/*
+ * ROMP and AVIC
+ */
+#define MXC91231_ROMP_BASE_ADDR 0x60000000
+#define MXC91231_ROMP_BASE_ADDR_VIRT 0xFC400000
+#define MXC91231_ROMP_SIZE SZ_64K
+
+#define MXC91231_AVIC_BASE_ADDR 0x68000000
+#define MXC91231_AVIC_BASE_ADDR_VIRT 0xFC410000
+#define MXC91231_AVIC_SIZE SZ_64K
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MXC91231_X_MEMC_BASE_ADDR 0xB8000000
+#define MXC91231_X_MEMC_BASE_ADDR_VIRT 0xFC420000
+#define MXC91231_X_MEMC_SIZE SZ_64K
+
+#define MXC91231_NFC_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x0000)
+#define MXC91231_ESDCTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x1000)
+#define MXC91231_WEIM_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x2000)
+#define MXC91231_M3IF_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x3000)
+#define MXC91231_EMI_CTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x4000)
+
+/*
+ * Memory regions and CS
+ * CPLD is connected on CS4
+ * CS5 is TP1021 or it is not connected
+ * */
+#define MXC91231_FB_RAM_BASE_ADDR 0x78000000
+#define MXC91231_FB_RAM_SIZE SZ_256K
+#define MXC91231_CSD0_BASE_ADDR 0x80000000
+#define MXC91231_CSD1_BASE_ADDR 0x90000000
+#define MXC91231_CS0_BASE_ADDR 0xA0000000
+#define MXC91231_CS1_BASE_ADDR 0xA8000000
+#define MXC91231_CS2_BASE_ADDR 0xB0000000
+#define MXC91231_CS3_BASE_ADDR 0xB2000000
+#define MXC91231_CS4_BASE_ADDR 0xB4000000
+#define MXC91231_CS5_BASE_ADDR 0xB6000000
+
+/* Is given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size) \
+ (((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Is given address belongs to the specified named `module'? */
+#define MXC91231_IS_MODULE(addr, module) \
+ ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
+ MXC91231_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MXC91231_IO_ADDRESS(x) \
+ (void __iomem *) \
+ (MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
+ 0xDEADBEEF)
+
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MXC91231_L2CC_IO_ADDRESS(x) \
+ (((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS1_IO_ADDRESS(x) \
+ (((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA0_IO_ADDRESS(x) \
+ (((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA1_IO_ADDRESS(x) \
+ (((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS2_IO_ADDRESS(x) \
+ (((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
+
+#define MXC91231_ROMP_IO_ADDRESS(x) \
+ (((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
+
+#define MXC91231_AVIC_IO_ADDRESS(x) \
+ (((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
+
+#define MXC91231_X_MEMC_IO_ADDRESS(x) \
+ (((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC91231_INT_GPIO3 0
+#define MXC91231_INT_EL1T_CI 1
+#define MXC91231_INT_EL1T_RFCI 2
+#define MXC91231_INT_EL1T_RFI 3
+#define MXC91231_INT_EL1T_MCU 4
+#define MXC91231_INT_EL1T_IPI 5
+#define MXC91231_INT_MU_GEN 6
+#define MXC91231_INT_GPIO4 7
+#define MXC91231_INT_MMC_SDHC2 8
+#define MXC91231_INT_MMC_SDHC1 9
+#define MXC91231_INT_I2C 10
+#define MXC91231_INT_SSI2 11
+#define MXC91231_INT_SSI1 12
+#define MXC91231_INT_CSPI2 13
+#define MXC91231_INT_CSPI1 14
+#define MXC91231_INT_RTIC 15
+#define MXC91231_INT_SAHARA 15
+#define MXC91231_INT_HAC 15
+#define MXC91231_INT_UART3_RX 16
+#define MXC91231_INT_UART3_TX 17
+#define MXC91231_INT_UART3_MINT 18
+#define MXC91231_INT_ECT 19
+#define MXC91231_INT_SIM_IPB 20
+#define MXC91231_INT_SIM_DATA 21
+#define MXC91231_INT_RNGA 22
+#define MXC91231_INT_DSM_AP 23
+#define MXC91231_INT_KPP 24
+#define MXC91231_INT_RTC 25
+#define MXC91231_INT_PWM 26
+#define MXC91231_INT_GEMK_AP 27
+#define MXC91231_INT_EPIT 28
+#define MXC91231_INT_GPT 29
+#define MXC91231_INT_UART2_RX 30
+#define MXC91231_INT_UART2_TX 31
+#define MXC91231_INT_UART2_MINT 32
+#define MXC91231_INT_NANDFC 33
+#define MXC91231_INT_SDMA 34
+#define MXC91231_INT_USB_WAKEUP 35
+#define MXC91231_INT_USB_SOF 36
+#define MXC91231_INT_PMU_EVTMON 37
+#define MXC91231_INT_USB_FUNC 38
+#define MXC91231_INT_USB_DMA 39
+#define MXC91231_INT_USB_CTRL 40
+#define MXC91231_INT_IPU_ERR 41
+#define MXC91231_INT_IPU_SYN 42
+#define MXC91231_INT_UART1_RX 43
+#define MXC91231_INT_UART1_TX 44
+#define MXC91231_INT_UART1_MINT 45
+#define MXC91231_INT_IIM 46
+#define MXC91231_INT_MU_RX_OR 47
+#define MXC91231_INT_MU_TX_OR 48
+#define MXC91231_INT_SCC_SCM 49
+#define MXC91231_INT_SCC_SMN 50
+#define MXC91231_INT_GPIO2 51
+#define MXC91231_INT_GPIO1 52
+#define MXC91231_INT_MQSPI1 53
+#define MXC91231_INT_MQSPI2 54
+#define MXC91231_INT_WDOG2 55
+#define MXC91231_INT_EXT_INT7 56
+#define MXC91231_INT_EXT_INT6 57
+#define MXC91231_INT_EXT_INT5 58
+#define MXC91231_INT_EXT_INT4 59
+#define MXC91231_INT_EXT_INT3 60
+#define MXC91231_INT_EXT_INT2 61
+#define MXC91231_INT_EXT_INT1 62
+#define MXC91231_INT_EXT_INT0 63
+
+#define MXC91231_MAX_INT_LINES 63
+#define MXC91231_MAX_EXT_LINES 8
+
+#endif /* __MACH_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index e56241af870..ef00199568d 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -21,8 +21,18 @@
#ifndef __ASM_ARCH_MXC_SYSTEM_H__
#define __ASM_ARCH_MXC_SYSTEM_H__
+#include <mach/hardware.h>
+#include <mach/common.h>
+
static inline void arch_idle(void)
{
+#ifdef CONFIG_ARCH_MXC91231
+ if (cpu_is_mxc91231()) {
+ /* Need this to set DSM low-power mode */
+ mxc91231_prepare_idle();
+ }
+#endif
+
cpu_do_idle();
}
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 07b4a73c9d2..527a6c24788 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -26,6 +26,10 @@
#define CLOCK_TICK_RATE 13300000
#elif defined CONFIG_ARCH_MX3
#define CLOCK_TICK_RATE 16625000
+#elif defined CONFIG_ARCH_MX25
+#define CLOCK_TICK_RATE 16000000
+#elif defined CONFIG_ARCH_MXC91231
+#define CLOCK_TICK_RATE 13000000
#endif
#endif /* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index de6fe036598..082a3908256 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -26,8 +26,11 @@
#define __MXC_BOOT_UNCOMPRESS
#include <mach/hardware.h>
+#include <asm/mach-types.h>
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+static unsigned long uart_base;
+
+#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
#define USR2 0x98
#define USR2_TXFE (1<<14)
@@ -46,19 +49,10 @@
static void putc(int ch)
{
- static unsigned long serial_port = 0;
-
- if (unlikely(serial_port == 0)) {
- do {
- serial_port = UART1_BASE_ADDR;
- if (UART(UCR1) & UCR1_UARTEN)
- break;
- serial_port = UART2_BASE_ADDR;
- if (UART(UCR1) & UCR1_UARTEN)
- break;
- return;
- } while (0);
- }
+ if (!uart_base)
+ return;
+ if (!(UART(UCR1) & UCR1_UARTEN))
+ return;
while (!(UART(USR2) & USR2_TXFE))
barrier();
@@ -68,11 +62,49 @@ static void putc(int ch)
#define flush() do { } while (0)
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
+#define MX1_UART1_BASE_ADDR 0x00206000
+#define MX25_UART1_BASE_ADDR 0x43f90000
+#define MX2X_UART1_BASE_ADDR 0x1000a000
+#define MX3X_UART1_BASE_ADDR 0x43F90000
+#define MX3X_UART2_BASE_ADDR 0x43F94000
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+ switch (arch_id) {
+ case MACH_TYPE_MX1ADS:
+ case MACH_TYPE_SCB9328:
+ uart_base = MX1_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MX25_3DS:
+ uart_base = MX25_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_IMX27LITE:
+ case MACH_TYPE_MX27_3DS:
+ case MACH_TYPE_MX27ADS:
+ case MACH_TYPE_PCM038:
+ case MACH_TYPE_MX21ADS:
+ uart_base = MX2X_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MX31LITE:
+ case MACH_TYPE_ARMADILLO5X0:
+ case MACH_TYPE_MX31MOBOARD:
+ case MACH_TYPE_QONG:
+ case MACH_TYPE_MX31_3DS:
+ case MACH_TYPE_PCM037:
+ case MACH_TYPE_MX31ADS:
+ case MACH_TYPE_MX35_3DS:
+ case MACH_TYPE_PCM043:
+ uart_base = MX3X_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MAGX_ZN5:
+ uart_base = MX3X_UART2_BASE_ADDR;
+ break;
+ default:
+ break;
+ }
+}
+#define arch_decomp_setup() __arch_decomp_setup(arch_id)
#define arch_decomp_wdog()
#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 77a078f9513..851ca99bf1b 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -29,7 +29,7 @@
#include <asm/mach/map.h>
#include <mach/iomux-v3.h>
-#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
+static void __iomem *base;
static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
@@ -45,14 +45,14 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
return -EBUSY;
if (pad->mux_ctrl_ofs)
- __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+ __raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
if (pad->select_input_ofs)
__raw_writel(pad->select_input,
- IOMUX_BASE + pad->select_input_ofs);
+ base + pad->select_input_ofs);
- if (!(pad->pad_ctrl & NO_PAD_CTRL))
- __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+ if (!(pad->pad_ctrl & NO_PAD_CTRL) && pad->pad_ctrl_ofs)
+ __raw_writel(pad->pad_ctrl, base + pad->pad_ctrl_ofs);
return 0;
}
EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
@@ -96,3 +96,8 @@ void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
}
}
EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
+
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
+{
+ base = iomux_v3_base;
+}
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 8aee76304f8..778ddfe57d8 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -44,7 +44,7 @@
#define AVIC_FIPNDH 0x60 /* fast int pending high */
#define AVIC_FIPNDL 0x64 /* fast int pending low */
-static void __iomem *avic_base;
+void __iomem *avic_base;
int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
@@ -113,11 +113,11 @@ static struct irq_chip mxc_avic_chip = {
* interrupts. It registers the interrupt enable and disable functions
* to the kernel for each interrupt source.
*/
-void __init mxc_init_irq(void)
+void __init mxc_init_irq(void __iomem *irqbase)
{
int i;
- avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+ avic_base = irqbase;
/* put the AVIC into the reset value with
* all interrupts disabled
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index ae34198a79d..5cdbd605ac0 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,7 @@
#define MX3_PWMPR 0x10 /* PWM Period Register */
#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
#define MX3_PWMCR_EN (1 << 0)
@@ -55,9 +56,11 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
return -EINVAL;
- if (cpu_is_mx27() || cpu_is_mx3()) {
+ if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25()) {
unsigned long long c;
unsigned long period_cycles, duty_cycles, prescale;
+ u32 cr;
+
c = clk_get_rate(pwm->clk);
c = c * period_ns;
do_div(c, 1000000000);
@@ -72,9 +75,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
- writel(MX3_PWMCR_PRESCALER(prescale - 1) |
- MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
- pwm->mmio_base + MX3_PWMCR);
+
+ cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+
+ if (cpu_is_mx25())
+ cr |= MX3_PWMCR_CLKSRC_IPG;
+ else
+ cr |= MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+ writel(cr, pwm->mmio_base + MX3_PWMCR);
} else if (cpu_is_mx1() || cpu_is_mx21()) {
/* The PWM subsystem allows for exact frequencies. However,
* I cannot connect a scope on my device to the PWM line and
@@ -118,6 +127,8 @@ EXPORT_SYMBOL(pwm_enable);
void pwm_disable(struct pwm_device *pwm)
{
+ writel(0, pwm->mmio_base + MX3_PWMCR);
+
if (pwm->clk_enabled) {
clk_disable(pwm->clk);
pwm->clk_enabled = 0;
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 79c37577c91..97f42799fa5 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -27,32 +27,38 @@
#include <linux/delay.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include <asm/proc-fns.h>
#include <asm/system.h>
-#ifdef CONFIG_ARCH_MX1
-#define WDOG_WCR_REG IO_ADDRESS(WDT_BASE_ADDR)
-#define WDOG_WCR_ENABLE (1 << 0)
-#else
-#define WDOG_WCR_REG IO_ADDRESS(WDOG_BASE_ADDR)
-#define WDOG_WCR_ENABLE (1 << 2)
-#endif
+static void __iomem *wdog_base;
/*
* Reset the system. It is called by machine_restart().
*/
void arch_reset(char mode, const char *cmd)
{
- if (!cpu_is_mx1()) {
+ unsigned int wcr_enable;
+
+#ifdef CONFIG_ARCH_MXC91231
+ if (cpu_is_mxc91231()) {
+ mxc91231_arch_reset(mode, cmd);
+ return;
+ }
+#endif
+ if (cpu_is_mx1()) {
+ wcr_enable = (1 << 0);
+ } else {
struct clk *clk;
clk = clk_get_sys("imx-wdt.0", NULL);
if (!IS_ERR(clk))
clk_enable(clk);
+ wcr_enable = (1 << 2);
}
/* Assert SRS signal */
- __raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG);
+ __raw_writew(wcr_enable, wdog_base);
/* wait for reset to assert... */
mdelay(500);
@@ -65,3 +71,8 @@ void arch_reset(char mode, const char *cmd)
/* we'll take a jump through zero as a poor second */
cpu_reset(0);
}
+
+void mxc_arch_reset_init(void __iomem *base)
+{
+ wdog_base = base;
+}
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 88fb3a57e02..844567ee35f 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
#define MX2_TSTAT_CAPT (1 << 1)
#define MX2_TSTAT_COMP (1 << 0)
-/* MX31, MX35 */
+/* MX31, MX35, MX25, MXC91231 */
#define MX3_TCTL_WAITEN (1 << 3)
#define MX3_TCTL_CLK_IPG (1 << 6)
#define MX3_TCTL_FRR (1 << 9)
@@ -66,7 +66,7 @@ static inline void gpt_irq_disable(void)
{
unsigned int tmp;
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
__raw_writel(0, timer_base + MX3_IR);
else {
tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void)
static inline void gpt_irq_enable(void)
{
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
__raw_writel(1<<0, timer_base + MX3_IR);
else {
__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -90,7 +90,7 @@ static void gpt_irq_acknowledge(void)
__raw_writel(0, timer_base + MX1_2_TSTAT);
if (cpu_is_mx2())
__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
}
@@ -117,7 +117,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
clocksource_mxc.read = mx3_get_cycles;
clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +180,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
if (mode != clockevent_mode) {
/* Set event time into far-far future */
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
timer_base + MX3_TCMP);
else
@@ -233,7 +233,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
struct clock_event_device *evt = &clockevent_mxc;
uint32_t tstat;
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
tstat = __raw_readl(timer_base + MX3_TSTAT);
else
tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +264,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
clockevent_mxc.set_next_event = mx3_set_next_event;
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -281,30 +281,13 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
return 0;
}
-void __init mxc_timer_init(struct clk *timer_clk)
+void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
{
uint32_t tctl_val;
- int irq;
clk_enable(timer_clk);
- if (cpu_is_mx1()) {
-#ifdef CONFIG_ARCH_MX1
- timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
- irq = TIM1_INT;
-#endif
- } else if (cpu_is_mx2()) {
-#ifdef CONFIG_ARCH_MX2
- timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
- irq = MXC_INT_GPT1;
-#endif
- } else if (cpu_is_mx3()) {
-#ifdef CONFIG_ARCH_MX3
- timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
- irq = MXC_INT_GPT;
-#endif
- } else
- BUG();
+ timer_base = base;
/*
* Initialise to a known state (all timers off, and timing reset)
@@ -313,7 +296,7 @@ void __init mxc_timer_init(struct clk *timer_clk)
__raw_writel(0, timer_base + MXC_TCTL);
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9298bc0ab17..fd21937fe11 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -138,6 +138,32 @@
#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
#define OMAP24XX_GPIO_SETDATAOUT 0x0094
+#define OMAP4_GPIO_REVISION 0x0000
+#define OMAP4_GPIO_SYSCONFIG 0x0010
+#define OMAP4_GPIO_EOI 0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
+#define OMAP4_GPIO_IRQSTATUS0 0x002c
+#define OMAP4_GPIO_IRQSTATUS1 0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0 0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1 0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
+#define OMAP4_GPIO_IRQWAKEN0 0x0044
+#define OMAP4_GPIO_IRQWAKEN1 0x0048
+#define OMAP4_GPIO_SYSSTATUS 0x0104
+#define OMAP4_GPIO_CTRL 0x0130
+#define OMAP4_GPIO_OE 0x0134
+#define OMAP4_GPIO_DATAIN 0x0138
+#define OMAP4_GPIO_DATAOUT 0x013c
+#define OMAP4_GPIO_LEVELDETECT0 0x0140
+#define OMAP4_GPIO_LEVELDETECT1 0x0144
+#define OMAP4_GPIO_RISINGDETECT 0x0148
+#define OMAP4_GPIO_FALLINGDETECT 0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
+#define OMAP4_GPIO_CLEARDATAOUT 0x0190
+#define OMAP4_GPIO_SETDATAOUT 0x0194
/*
* omap34xx specific GPIO registers
*/
@@ -386,12 +412,16 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
reg += OMAP850_GPIO_DIR_CONTROL;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ case METHOD_GPIO_24XX:
+ reg += OMAP4_GPIO_OE;
+ break;
+#endif
default:
WARN_ON(1);
return;
@@ -459,8 +489,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
l &= ~(1 << gpio);
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -469,6 +498,15 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
l = 1 << gpio;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_24XX:
+ if (enable)
+ reg += OMAP4_GPIO_SETDATAOUT;
+ else
+ reg += OMAP4_GPIO_CLEARDATAOUT;
+ l = 1 << gpio;
+ break;
+#endif
default:
WARN_ON(1);
return;
@@ -509,12 +547,16 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
reg += OMAP850_GPIO_DATA_INPUT;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_24XX:
+ reg += OMAP4_GPIO_DATAIN;
+ break;
+#endif
default:
return -EINVAL;
}
@@ -589,7 +631,11 @@ void omap_set_gpio_debounce(int gpio, int enable)
bank = get_gpio_bank(gpio);
reg = bank->base;
+#ifdef CONFIG_ARCH_OMAP4
+ reg += OMAP4_GPIO_DEBOUNCENABLE;
+#else
reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+#endif
spin_lock_irqsave(&bank->lock, flags);
val = __raw_readl(reg);
@@ -626,7 +672,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
reg = bank->base;
enc_time &= 0xff;
+#ifdef CONFIG_ARCH_OMAP4
+ reg += OMAP4_GPIO_DEBOUNCINGTIME;
+#else
reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+#endif
__raw_writel(enc_time, reg);
}
EXPORT_SYMBOL(omap_set_gpio_debounce_time);
@@ -638,23 +688,46 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
{
void __iomem *base = bank->base;
u32 gpio_bit = 1 << gpio;
+ u32 val;
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
-
+ if (cpu_is_omap44xx()) {
+ MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
+ } else {
+ MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
+ }
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
- if (trigger != 0)
- __raw_writel(1 << gpio, bank->base
+ if (cpu_is_omap44xx()) {
+ if (trigger != 0)
+ __raw_writel(1 << gpio, bank->base+
+ OMAP4_GPIO_IRQWAKEN0);
+ else {
+ val = __raw_readl(bank->base +
+ OMAP4_GPIO_IRQWAKEN0);
+ __raw_writel(val & (~(1 << gpio)), bank->base +
+ OMAP4_GPIO_IRQWAKEN0);
+ }
+ } else {
+ if (trigger != 0)
+ __raw_writel(1 << gpio, bank->base
+ OMAP24XX_GPIO_SETWKUENA);
- else
- __raw_writel(1 << gpio, bank->base
+ else
+ __raw_writel(1 << gpio, bank->base
+ OMAP24XX_GPIO_CLEARWKUENA);
+ }
} else {
if (trigger != 0)
bank->enabled_non_wakeup_gpios |= gpio_bit;
@@ -662,9 +735,15 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
bank->enabled_non_wakeup_gpios &= ~gpio_bit;
}
- bank->level_mask =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ if (cpu_is_omap44xx()) {
+ bank->level_mask =
+ __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
+ __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
+ } else {
+ bank->level_mask =
+ __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+ __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ }
}
#endif
@@ -828,12 +907,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
reg += OMAP850_GPIO_INT_STATUS;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ case METHOD_GPIO_24XX:
+ reg += OMAP4_GPIO_IRQSTATUS0;
+ break;
+#endif
default:
WARN_ON(1);
return;
@@ -843,12 +926,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
/* Workaround for clearing DSP GPIO interrupts to allow retention */
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+#endif
+ if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
__raw_writel(gpio_mask, reg);
/* Flush posted write for the irq status to avoid spurious interrupts */
__raw_readl(reg);
-#endif
+ }
}
static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -898,13 +985,18 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
inv = 1;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
break;
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ case METHOD_GPIO_24XX:
+ reg += OMAP4_GPIO_IRQSTATUSSET0;
+ mask = 0xffffffff;
+ break;
+#endif
default:
WARN_ON(1);
return 0;
@@ -972,8 +1064,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
l |= gpio_mask;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -982,6 +1073,15 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
l = gpio_mask;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_24XX:
+ if (enable)
+ reg += OMAP4_GPIO_IRQSTATUSSET0;
+ else
+ reg += OMAP4_GPIO_IRQSTATUSCLR0;
+ l = gpio_mask;
+ break;
+#endif
default:
WARN_ON(1);
return;
@@ -1157,11 +1257,14 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (bank->method == METHOD_GPIO_850)
isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ if (bank->method == METHOD_GPIO_24XX)
+ isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
+#endif
while(1) {
u32 isr_saved, level_mask = 0;
u32 enabled;
@@ -1638,7 +1741,7 @@ static int __init _omap_gpio_init(void)
gpio_bank_count = OMAP34XX_NR_GPIOS;
gpio_bank = gpio_bank_44xx;
- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
(rev >> 4) & 0x0f, rev & 0x0f);
}
@@ -1672,7 +1775,16 @@ static int __init _omap_gpio_init(void)
static const u32 non_wakeup_gpios[] = {
0xe203ffc0, 0x08700040
};
-
+ if (cpu_is_omap44xx()) {
+ __raw_writel(0xffffffff, bank->base +
+ OMAP4_GPIO_IRQSTATUSCLR0);
+ __raw_writew(0x0015, bank->base +
+ OMAP4_GPIO_SYSCONFIG);
+ __raw_writel(0x00000000, bank->base +
+ OMAP4_GPIO_DEBOUNCENABLE);
+ /* Initialize interface clock ungated, module enabled */
+ __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+ } else {
__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
@@ -1680,12 +1792,12 @@ static int __init _omap_gpio_init(void)
/* Initialize interface clock ungated, module enabled */
__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+ }
if (i < ARRAY_SIZE(non_wakeup_gpios))
bank->non_wakeup_gpios = non_wakeup_gpios[i];
gpio_count = 32;
}
#endif
-
/* REVISIT eventually switch from OMAP-specific gpio structs
* over to the generic ones
*/
@@ -1771,14 +1883,20 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_24XX:
+ wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ break;
+#endif
default:
continue;
}
@@ -1813,13 +1931,18 @@ static int omap_gpio_resume(struct sys_device *dev)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_24XX:
+ wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ break;
+#endif
default:
continue;
}
@@ -1863,21 +1986,29 @@ void omap2_gpio_prepare_for_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ bank->saved_datain = __raw_readl(bank->base +
+ OMAP4_GPIO_DATAIN);
+ l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT);
+ l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT);
+#endif
bank->saved_fallingdetect = l1;
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+ __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
+#endif
c++;
}
if (!c) {
@@ -1899,27 +2030,29 @@ void omap2_gpio_resume_after_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
__raw_writel(bank->saved_fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(bank->saved_risingdetect,
bank->base + OMAP24XX_GPIO_RISINGDETECT);
+ l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+ __raw_writel(bank->saved_fallingdetect,
+ bank->base + OMAP4_GPIO_FALLINGDETECT);
+ __raw_writel(bank->saved_risingdetect,
+ bank->base + OMAP4_GPIO_RISINGDETECT);
+ l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
#endif
/* Check if any of the non-wakeup interrupt GPIOs have changed
* state. If so, generate an IRQ by software. This is
* horribly racy, but it's the best we can do to work around
* this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
- l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-#endif
l ^= bank->saved_datain;
l &= bank->non_wakeup_gpios;
if (l) {
u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1927,6 +2060,20 @@ void omap2_gpio_resume_after_retention(void)
__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ old0 = __raw_readl(bank->base +
+ OMAP4_GPIO_LEVELDETECT0);
+ old1 = __raw_readl(bank->base +
+ OMAP4_GPIO_LEVELDETECT1);
+ __raw_writel(old0 | l, bank->base +
+ OMAP4_GPIO_LEVELDETECT0);
+ __raw_writel(old1 | l, bank->base +
+ OMAP4_GPIO_LEVELDETECT1);
+ __raw_writel(old0, bank->base +
+ OMAP4_GPIO_LEVELDETECT0);
+ __raw_writel(old1, bank->base +
+ OMAP4_GPIO_LEVELDETECT1);
+#endif
}
}
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 7b939cc0196..72f680b7180 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -122,6 +122,11 @@
#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0)
#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4)
+/* Additional registers available on OMAP4 */
+#define OMAP_DMA4_CDP(n) (0x60 * (n) + 0xd0)
+#define OMAP_DMA4_CNDP(n) (0x60 * (n) + 0xd4)
+#define OMAP_DMA4_CCDN(n) (0x60 * (n) + 0xd8)
+
/* Dummy defines to keep multi-omap compiles happy */
#define OMAP1_DMA_REVISION 0
#define OMAP1_DMA_IRQSTATUS_L0 0
@@ -311,6 +316,89 @@
#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
+/* DMA request lines for 44xx */
+#define OMAP44XX_DMA_DSS_DISPC_REQ 6 /* S_DMA_5 */
+#define OMAP44XX_DMA_SYS_REQ2 7 /* S_DMA_6 */
+#define OMAP44XX_DMA_ISS_REQ1 9 /* S_DMA_8 */
+#define OMAP44XX_DMA_ISS_REQ2 10 /* S_DMA_9 */
+#define OMAP44XX_DMA_ISS_REQ3 12 /* S_DMA_11 */
+#define OMAP44XX_DMA_ISS_REQ4 13 /* S_DMA_12 */
+#define OMAP44XX_DMA_DSS_RFBI_REQ 14 /* S_DMA_13 */
+#define OMAP44XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
+#define OMAP44XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
+#define OMAP44XX_DMA_MCBSP2_TX 17 /* S_DMA_16 */
+#define OMAP44XX_DMA_MCBSP2_RX 18 /* S_DMA_17 */
+#define OMAP44XX_DMA_MCBSP3_TX 19 /* S_DMA_18 */
+#define OMAP44XX_DMA_MCBSP3_RX 20 /* S_DMA_19 */
+#define OMAP44XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
+#define OMAP44XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
+#define OMAP44XX_DMA_I2C3_TX 25 /* S_DMA_24 */
+#define OMAP44XX_DMA_I2C3_RX 26 /* S_DMA_25 */
+#define OMAP44XX_DMA_I2C1_TX 27 /* S_DMA_26 */
+#define OMAP44XX_DMA_I2C1_RX 28 /* S_DMA_27 */
+#define OMAP44XX_DMA_I2C2_TX 29 /* S_DMA_28 */
+#define OMAP44XX_DMA_I2C2_RX 30 /* S_DMA_29 */
+#define OMAP44XX_DMA_MCBSP4_TX 31 /* S_DMA_30 */
+#define OMAP44XX_DMA_MCBSP4_RX 32 /* S_DMA_31 */
+#define OMAP44XX_DMA_MCBSP1_TX 33 /* S_DMA_32 */
+#define OMAP44XX_DMA_MCBSP1_RX 34 /* S_DMA_33 */
+#define OMAP44XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
+#define OMAP44XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
+#define OMAP44XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
+#define OMAP44XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
+#define OMAP44XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
+#define OMAP44XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
+#define OMAP44XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
+#define OMAP44XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
+#define OMAP44XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
+#define OMAP44XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
+#define OMAP44XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
+#define OMAP44XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
+#define OMAP44XX_DMA_MMC2_TX 47 /* S_DMA_46 */
+#define OMAP44XX_DMA_MMC2_RX 48 /* S_DMA_47 */
+#define OMAP44XX_DMA_UART1_TX 49 /* S_DMA_48 */
+#define OMAP44XX_DMA_UART1_RX 50 /* S_DMA_49 */
+#define OMAP44XX_DMA_UART2_TX 51 /* S_DMA_50 */
+#define OMAP44XX_DMA_UART2_RX 52 /* S_DMA_51 */
+#define OMAP44XX_DMA_UART3_TX 53 /* S_DMA_52 */
+#define OMAP44XX_DMA_UART3_RX 54 /* S_DMA_53 */
+#define OMAP44XX_DMA_UART4_TX 55 /* S_DMA_54 */
+#define OMAP44XX_DMA_UART4_RX 56 /* S_DMA_55 */
+#define OMAP44XX_DMA_MMC4_TX 57 /* S_DMA_56 */
+#define OMAP44XX_DMA_MMC4_RX 58 /* S_DMA_57 */
+#define OMAP44XX_DMA_MMC5_TX 59 /* S_DMA_58 */
+#define OMAP44XX_DMA_MMC5_RX 60 /* S_DMA_59 */
+#define OMAP44XX_DMA_MMC1_TX 61 /* S_DMA_60 */
+#define OMAP44XX_DMA_MMC1_RX 62 /* S_DMA_61 */
+#define OMAP44XX_DMA_SYS_REQ3 64 /* S_DMA_63 */
+#define OMAP44XX_DMA_MCPDM_UP 65 /* S_DMA_64 */
+#define OMAP44XX_DMA_MCPDM_DL 66 /* S_DMA_65 */
+#define OMAP44XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
+#define OMAP44XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 /* S_DMA_71 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 /* S_DMA_72 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 /* S_DMA_73 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 /* S_DMA_74 */
+#define OMAP44XX_DMA_DSS_HDMI_REQ 76 /* S_DMA_75 */
+#define OMAP44XX_DMA_MMC3_TX 77 /* S_DMA_76 */
+#define OMAP44XX_DMA_MMC3_RX 78 /* S_DMA_77 */
+#define OMAP44XX_DMA_USIM_TX 79 /* S_DMA_78 */
+#define OMAP44XX_DMA_USIM_RX 80 /* S_DMA_79 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 /* S_DMA_80 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 /* S_DMA_81 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 /* S_DMA_82 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 /* S_DMA_83 */
+#define OMAP44XX_DMA_ABE_REQ0 101 /* S_DMA_100 */
+#define OMAP44XX_DMA_ABE_REQ1 102 /* S_DMA_101 */
+#define OMAP44XX_DMA_ABE_REQ2 103 /* S_DMA_102 */
+#define OMAP44XX_DMA_ABE_REQ3 104 /* S_DMA_103 */
+#define OMAP44XX_DMA_ABE_REQ4 105 /* S_DMA_104 */
+#define OMAP44XX_DMA_ABE_REQ5 106 /* S_DMA_105 */
+#define OMAP44XX_DMA_ABE_REQ6 107 /* S_DMA_106 */
+#define OMAP44XX_DMA_ABE_REQ7 108 /* S_DMA_107 */
+#define OMAP44XX_DMA_I2C4_TX 124 /* S_DMA_123 */
+#define OMAP44XX_DMA_I2C4_RX 125 /* S_DMA_124 */
+
/*----------------------------------------------------------------------------*/
/* Hardware registers for LCD DMA */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 63a3f254af7..e0d6eca222c 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -53,6 +53,11 @@
#define OMAP34XX_MCBSP4_BASE 0x49026000
#define OMAP34XX_MCBSP5_BASE 0x48096000
+#define OMAP44XX_MCBSP1_BASE 0x49022000
+#define OMAP44XX_MCBSP2_BASE 0x49024000
+#define OMAP44XX_MCBSP3_BASE 0x49026000
+#define OMAP44XX_MCBSP4_BASE 0x48074000
+
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
#define OMAP_MCBSP_REG_DRR2 0x00
@@ -98,7 +103,8 @@
#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
#define OMAP_MCBSP_REG_DRR2 0x00
#define OMAP_MCBSP_REG_DRR1 0x04
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 8dc7927906f..88ac9768f1c 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -191,7 +191,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
- if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
}
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 935c7558469..8931c5f0e46 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -198,4 +198,9 @@ config S3C_DEV_USB_HSOTG
help
Compile in platform device definition for USB high-speed OtG
+config S3C_DEV_NAND
+ bool
+ help
+ Compile in platform device definition for NAND controller
+
endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 0761766b183..3c09109e9e8 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -28,13 +28,17 @@ obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += pm-gpio.o
obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM) += pwm.o
+
# devices
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
-obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
+obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
new file mode 100644
index 00000000000..4e532373243
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -0,0 +1,30 @@
+/*
+ * S3C series device definition for nand device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+
+static struct resource s3c_nand_resource[] = {
+ [0] = {
+ .start = S3C_PA_NAND,
+ .end = S3C_PA_NAND + SZ_1M,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+struct platform_device s3c_device_nand = {
+ .name = "s3c2410-nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_nand_resource),
+ .resource = s3c_nand_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_nand);
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index d847bd476b6..5f3b1cd53b9 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,14 @@ struct s3c_adc_client;
extern int s3c_adc_start(struct s3c_adc_client *client,
unsigned int channel, unsigned int nr_samples);
+extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
+
extern struct s3c_adc_client *
s3c_adc_register(struct platform_device *pdev,
- void (*select)(unsigned selected),
- void (*conv)(unsigned d0, unsigned d1,
+ void (*select)(struct s3c_adc_client *client,
+ unsigned selected),
+ void (*conv)(struct s3c_adc_client *client,
+ unsigned d0, unsigned d1,
unsigned *samples_left),
unsigned int is_ts);
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index c86a13307e9..7b982b7f28c 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -17,6 +17,21 @@ struct s3c_cpufreq_info;
struct s3c_cpufreq_board;
struct s3c_iotimings;
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
struct s3c_freq {
unsigned long fclk;
unsigned long armclk;
@@ -25,48 +40,84 @@ struct s3c_freq {
unsigned long pclk;
};
-/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
* notification can use this information that is not provided by just
* having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
*/
-
struct s3c_cpufreq_freqs {
struct cpufreq_freqs freqs;
struct s3c_freq old;
struct s3c_freq new;
+
+ unsigned int pll_changing:1;
};
#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
struct s3c_clkdivs {
- int p_divisor; /* fclk / pclk */
- int h_divisor; /* fclk / hclk */
- int arm_divisor; /* not all cpus have this. */
- unsigned char dvs; /* using dvs mode to arm. */
+ int p_divisor;
+ int h_divisor;
+ int arm_divisor;
+ unsigned char dvs;
};
#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
struct s3c_pllval {
unsigned long freq;
unsigned long pll_reg;
};
-struct s3c_cpufreq_config {
- struct s3c_freq freq;
- struct s3c_pllval pll;
- struct s3c_clkdivs divs;
- struct s3c_cpufreq_info *info; /* for core, not drivers */
- struct s3c_cpufreq_board *board;
-};
-
-/* s3c_cpufreq_board
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ * initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ * lines that will require the hardware timing registers to be
+ * updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ * is left at zero will use the CPU's settings.
+ *
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
*
- * per-board configuraton information, such as memory refresh and
- * how to initialise IO timings.
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
*/
struct s3c_cpufreq_board {
- unsigned int refresh; /* refresh period in ns */
+ unsigned int refresh;
unsigned int auto_io:1; /* automatically init io timings. */
unsigned int need_io:1; /* set if needs io timing support. */
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index be541cbba07..fbc3d498e02 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -65,6 +65,7 @@ extern struct sys_timer s3c24xx_timer;
/* system device classes */
extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2410a_sysclass;
extern struct sysdev_class s3c2412_sysclass;
extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e170827e0b..0f540ea1e99 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -46,6 +46,8 @@ extern struct platform_device s3c_device_hsmmc2;
extern struct platform_device s3c_device_spi0;
extern struct platform_device s3c_device_spi1;
+extern struct platform_device s3c_device_hwmon;
+
extern struct platform_device s3c_device_nand;
extern struct platform_device s3c_device_usbgadget;
@@ -56,5 +58,6 @@ extern struct platform_device s3c_device_usb_hsotg;
#ifdef CONFIG_CPU_S3C2440
extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
#endif
diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h
new file mode 100644
index 00000000000..1ba88ea0aa3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/hwmon.h
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+ const char *name;
+ unsigned int mult;
+ unsigned int div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+ struct s3c_hwmon_chcfg *in[8];
+};
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d32a5..250be311c85 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
@@ -32,9 +32,15 @@
#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */
#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */
-#define S3C_VA_MEM S3C_ADDR(0x00200000) /* system control */
+#define S3C_VA_MEM S3C_ADDR(0x00200000) /* memory control */
#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */
#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */
#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x) S3C_ADDR(0x00500000 + (x))
+
#endif /* __ASM_PLAT_MAP_H */
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c/pwm.c
index 82a6d4de02a..4fdc5b307fd 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c/pwm.c
@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c24xx/pwm.c
+/* arch/arm/plat-s3c/pwm.c
*
* Copyright (c) 2007 Ben Dooks
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
*
- * S3C24XX PWM device core
+ * S3C series PWM device core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,6 +20,7 @@
#include <linux/pwm.h>
#include <mach/irqs.h>
+#include <mach/map.h>
#include <plat/devs.h>
#include <plat/regs-timer.h>
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58..9c7aca48964 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -10,6 +10,7 @@ config PLAT_S3C24XX
default y
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
+ select S3C_DEVICE_NAND
help
Base platform code for any Samsung S3C24XX device
@@ -34,6 +35,40 @@ config CPU_S3C244X
help
Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+config S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+ select S3C2410_CPUFREQ_UTILS
+ default y
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
@@ -105,8 +140,39 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
SPI GPIO configuration code for BUS 1 when connected to
GPG5, GPG6 and GPG7.
+config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
+ bool
+ help
+ SPI GPIO configuration code for BUS 1 when connected to
+ GPD8, GPD9 and GPD10.
+
# common code for s3c24xx based machines, such as the SMDKs.
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+ bool
+ depends on CPU_FREQ_S3C24XX
+ help
+ Internal node to select io timing code that is common to the s3c2410
+ and s3c2440/s3c2442 cpu frequency support.
+
+config S3C2410_CPUFREQ_UTILS
+ bool
+ depends on CPU_FREQ_S3C24XX
+ help
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+ bool
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+ help
+ Intel node to select io timing code that is common to the s3c2412
+ and the s3c2443.
+
config MACH_SMDK
bool
help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..7780d2dd833 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -20,19 +20,28 @@ obj-y += gpiolib.o
obj-y += clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
+
# Architecture dependant builds
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_S3C24XX_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C24XX_ADC) += adc.o
+obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
# device specific setup and/or initialisation
obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
@@ -41,6 +50,7 @@ obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o
# machine common support
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index ee1baf11ad9..11117a7ba91 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -39,13 +39,16 @@
struct s3c_adc_client {
struct platform_device *pdev;
struct list_head pend;
+ wait_queue_head_t *wait;
unsigned int nr_samples;
+ int result;
unsigned char is_ts;
unsigned char channel;
- void (*select_cb)(unsigned selected);
- void (*convert_cb)(unsigned val1, unsigned val2,
+ void (*select_cb)(struct s3c_adc_client *c, unsigned selected);
+ void (*convert_cb)(struct s3c_adc_client *c,
+ unsigned val1, unsigned val2,
unsigned *samples_left);
};
@@ -81,7 +84,7 @@ static inline void s3c_adc_select(struct adc_device *adc,
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
- client->select_cb(1);
+ client->select_cb(client, 1);
con &= ~S3C2410_ADCCON_MUXMASK;
con &= ~S3C2410_ADCCON_STDBM;
@@ -153,25 +156,61 @@ int s3c_adc_start(struct s3c_adc_client *client,
}
EXPORT_SYMBOL_GPL(s3c_adc_start);
-static void s3c_adc_default_select(unsigned select)
+static void s3c_convert_done(struct s3c_adc_client *client,
+ unsigned v, unsigned u, unsigned *left)
+{
+ client->result = v;
+ wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+ int ret;
+
+ client->convert_cb = s3c_convert_done;
+ client->wait = &wake;
+ client->result = -1;
+
+ ret = s3c_adc_start(client, ch, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+ if (client->result < 0) {
+ ret = -ETIMEDOUT;
+ goto err;
+ }
+
+ client->convert_cb = NULL;
+ return client->result;
+
+err:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_convert);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+ unsigned select)
{
}
struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
- void (*select)(unsigned int selected),
- void (*conv)(unsigned d0, unsigned d1,
+ void (*select)(struct s3c_adc_client *client,
+ unsigned int selected),
+ void (*conv)(struct s3c_adc_client *client,
+ unsigned d0, unsigned d1,
unsigned *samples_left),
unsigned int is_ts)
{
struct s3c_adc_client *client;
WARN_ON(!pdev);
- WARN_ON(!conv);
if (!select)
select = s3c_adc_default_select;
- if (!conv || !pdev)
+ if (!pdev)
return ERR_PTR(-EINVAL);
client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
@@ -230,16 +269,19 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
client->nr_samples--;
- (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
+
+ if (client->convert_cb)
+ (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
+ &client->nr_samples);
if (client->nr_samples > 0) {
/* fire another conversion for this */
- client->select_cb(1);
+ client->select_cb(client, 1);
s3c_adc_convert(adc);
} else {
local_irq_save(flags);
- (client->select_cb)(0);
+ (client->select_cb)(client, 0);
adc->cur = NULL;
s3c_adc_try(adc);
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
new file mode 100644
index 00000000000..a9276667c2f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -0,0 +1,199 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+ seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+ f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+ struct s3c_cpufreq_config *cfg;
+ struct s3c_cpufreq_board *brd;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ brd = cfg->board;
+ if (!brd) {
+ seq_printf(seq, "no board definition set?\n");
+ return 0;
+ }
+
+ seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+ seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+ seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+ show_max(seq, &brd->max);
+
+
+ return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+ .open = fops_board_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+ struct s3c_cpufreq_config *cfg;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk);
+ seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n",
+ cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+ seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk);
+ seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+ seq_printf(seq, "\n");
+
+ show_max(seq, &cfg->max);
+
+ seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+ cfg->divs.h_divisor, cfg->divs.p_divisor,
+ cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+ seq_printf(seq, "\n");
+
+ seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+ return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+ .open = fops_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+ void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+ struct s3c_cpufreq_config *cfg;
+ struct s3c_iotimings *iot;
+ union s3c_iobank *iob;
+ int bank;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ show_bank = cfg->info->debug_io_show;
+ if (!show_bank) {
+ seq_printf(seq, "no code to show bank timing\n");
+ return 0;
+ }
+
+ iot = s3c_cpufreq_getiotimings();
+ if (!iot) {
+ seq_printf(seq, "no io timings registered\n");
+ return 0;
+ }
+
+ seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ iob = &iot->bank[bank];
+
+ seq_printf(seq, "bank %d: ", bank);
+
+ if (!iob->io_2410) {
+ seq_printf(seq, "nothing set\n");
+ continue;
+ }
+
+ show_bank(seq, cfg, iob);
+ }
+
+ return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+ .open = fops_io_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+ dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+ if (IS_ERR(dbgfs_root)) {
+ printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+ return PTR_ERR(dbgfs_root);
+ }
+
+ dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+ NULL, &fops_io);
+
+ dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+ NULL, &fops_info);
+
+ dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+ NULL, &fops_board);
+
+ return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
new file mode 100644
index 00000000000..4f1b789a117
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -0,0 +1,716 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
+ *
+ * Copyright (c) 2006,2007,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+ return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+ return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long fclk, pclk, hclk, armclk;
+
+ cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+ cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+ cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+ cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+ cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+ cfg->pll.frequency = fclk;
+
+ cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+ cfg->divs.h_divisor = fclk / hclk;
+ cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long pll = cfg->pll.frequency;
+
+ cfg->freq.fclk = pll;
+ cfg->freq.hclk = pll / cfg->divs.h_divisor;
+ cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+ /* convert hclk into 10ths of nanoseconds for io calcs */
+ cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+ int diff_cur = abs(target - c);
+ int diff_new = abs(target - n);
+
+ return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+ struct s3c_cpufreq_config *cfg)
+{
+ s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+ pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+ cfg->freq.hclk, cfg->divs.h_divisor,
+ cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+ if (cfg->info->set_iotiming)
+ (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+ if (cfg->info->calc_iotiming)
+ return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+ return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+ cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+ unsigned int freq)
+{
+ clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ struct cpufreq_frequency_table *pll)
+{
+ struct s3c_cpufreq_freqs freqs;
+ struct s3c_cpufreq_config cpu_new;
+ unsigned long flags;
+
+ cpu_new = cpu_cur; /* copy new from current */
+
+ s3c_cpufreq_show("cur", &cpu_cur);
+
+ /* TODO - check for DMA currently outstanding */
+
+ cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+ if (pll)
+ freqs.pll_changing = 1;
+
+ /* update our frequencies */
+
+ cpu_new.freq.armclk = target_freq;
+ cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+ if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+ printk(KERN_ERR "no divisors for %d\n", target_freq);
+ goto err_notpossible;
+ }
+
+ s3c_freq_dbg("%s: got divs\n", __func__);
+
+ s3c_cpufreq_calc(&cpu_new);
+
+ s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+ if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+ if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+ printk(KERN_ERR "%s: no IO timings\n", __func__);
+ goto err_notpossible;
+ }
+ }
+
+ s3c_cpufreq_show("new", &cpu_new);
+
+ /* setup our cpufreq parameters */
+
+ freqs.old = cpu_cur.freq;
+ freqs.new = cpu_new.freq;
+
+ freqs.freqs.cpu = 0;
+ freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+ freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+ /* update f/h/p clock settings before we issue the change
+ * notification, so that drivers do not need to do anything
+ * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+ s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+ s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+ s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+ s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+ /* start the frequency change */
+
+ if (policy)
+ cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+ /* If hclk is staying the same, then we do not need to
+ * re-write the IO or the refresh timings whilst we are changing
+ * speed. */
+
+ local_irq_save(flags);
+
+ /* is our memory clock slowing down? */
+ if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+ s3c_cpufreq_setrefresh(&cpu_new);
+ s3c_cpufreq_setio(&cpu_new);
+ }
+
+ if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+ /* not changing PLL, just set the divisors */
+
+ s3c_cpufreq_setdivs(&cpu_new);
+ } else {
+ if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+ /* slow the cpu down, then set divisors */
+
+ s3c_cpufreq_setfvco(&cpu_new);
+ s3c_cpufreq_setdivs(&cpu_new);
+ } else {
+ /* set the divisors, then speed up */
+
+ s3c_cpufreq_setdivs(&cpu_new);
+ s3c_cpufreq_setfvco(&cpu_new);
+ }
+ }
+
+ /* did our memory clock speed up */
+ if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+ s3c_cpufreq_setrefresh(&cpu_new);
+ s3c_cpufreq_setio(&cpu_new);
+ }
+
+ /* update our current settings */
+ cpu_cur = cpu_new;
+
+ local_irq_restore(flags);
+
+ /* notify everyone we've done this */
+ if (policy)
+ cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+ s3c_freq_dbg("%s: finished\n", __func__);
+ return 0;
+
+ err_notpossible:
+ printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_frequency_table *pll;
+ unsigned int index;
+
+ /* avoid repeated calls which cause a needless amout of duplicated
+ * logging output (and CPU time as the calculation process is
+ * done) */
+ if (target_freq == last_target)
+ return 0;
+
+ last_target = target_freq;
+
+ s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+ __func__, policy, target_freq, relation);
+
+ if (ftab) {
+ if (cpufreq_frequency_table_target(policy, ftab,
+ target_freq, relation,
+ &index)) {
+ s3c_freq_dbg("%s: table failed\n", __func__);
+ return -EINVAL;
+ }
+
+ s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+ target_freq, index, ftab[index].frequency);
+ target_freq = ftab[index].frequency;
+ }
+
+ target_freq *= 1000; /* convert target to Hz */
+
+ /* find the settings for our new frequency */
+
+ if (!pll_reg || cpu_cur.lock_pll) {
+ /* either we've not got any PLL values, or we've locked
+ * to the current one. */
+ pll = NULL;
+ } else {
+ struct cpufreq_policy tmp_policy;
+ int ret;
+
+ /* we keep the cpu pll table in Hz, to ensure we get an
+ * accurate value for the PLL output. */
+
+ tmp_policy.min = policy->min * 1000;
+ tmp_policy.max = policy->max * 1000;
+ tmp_policy.cpu = policy->cpu;
+
+ /* cpufreq_frequency_table_target uses a pointer to 'index'
+ * which is the number of the table entry, not the value of
+ * the table entry's index field. */
+
+ ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+ target_freq, relation,
+ &index);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: no PLL available\n", __func__);
+ goto err_notpossible;
+ }
+
+ pll = pll_reg + index;
+
+ s3c_freq_dbg("%s: target %u => %u\n",
+ __func__, target_freq, pll->frequency);
+
+ target_freq = pll->frequency;
+ }
+
+ return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+ printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+ return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, name);
+ if (IS_ERR(clk))
+ printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+ return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+ printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->cur = s3c_cpufreq_get(0);
+ policy->min = policy->cpuinfo.min_freq = 0;
+ policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ /* feed the latency information from the cpu driver */
+ policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+ if (ftab)
+ cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+ return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+ _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+ _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+ clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+ clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+ clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+ clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+ if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+ IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+ printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+ return -ENOENT;
+ }
+
+ printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+ clk_get_rate(clk_fclk) / 1000,
+ clk_get_rate(clk_hclk) / 1000,
+ clk_get_rate(clk_pclk) / 1000,
+ clk_get_rate(clk_arm) / 1000);
+
+ return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+ suspend_pll.frequency = clk_get_rate(_clk_mpll);
+ suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+ suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+ return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ int ret;
+
+ s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+ last_target = ~0; /* invalidate last_target setting */
+
+ /* first, find out what speed we resumed at. */
+ s3c_cpufreq_resume_clocks();
+
+ /* whilst we will be called later on, we try and re-set the
+ * cpu frequencies as soon as possible so that we do not end
+ * up resuming devices and then immediatley having to re-set
+ * a number of settings once these devices have restarted.
+ *
+ * as a note, it is expected devices are not used until they
+ * have been un-suspended and at that time they should have
+ * used the updated clock settings.
+ */
+
+ ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = s3c_cpufreq_verify,
+ .target = s3c_cpufreq_target,
+ .get = s3c_cpufreq_get,
+ .init = s3c_cpufreq_init,
+ .suspend = s3c_cpufreq_suspend,
+ .resume = s3c_cpufreq_resume,
+ .name = "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+ if (!info || !info->name) {
+ printk(KERN_ERR "%s: failed to pass valid information\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+ info->name);
+
+ /* check our driver info has valid data */
+
+ BUG_ON(info->set_refresh == NULL);
+ BUG_ON(info->set_divs == NULL);
+ BUG_ON(info->calc_divs == NULL);
+
+ /* info->set_fvco is optional, depending on whether there
+ * is a need to set the clock code. */
+
+ cpu_cur.info = info;
+
+ /* Note, driver registering should probably update locktime */
+
+ return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+ struct s3c_cpufreq_board *ours;
+
+ if (!board) {
+ printk(KERN_INFO "%s: no board data\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Copy the board information so that each board can make this
+ * initdata. */
+
+ ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+ if (ours == NULL) {
+ printk(KERN_ERR "%s: no memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ *ours = *board;
+ cpu_cur.board = ours;
+
+ return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+ int ret;
+
+ if (!cpu_cur.info->get_iotiming) {
+ printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+ return -ENOENT;
+ }
+
+ printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+ ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+ if (ret)
+ printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+ return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+ struct s3c_freq *a, struct s3c_freq *b)
+{
+ dst->fclk = do_min(a->fclk, b->fclk);
+ dst->hclk = do_min(a->hclk, b->hclk);
+ dst->pclk = do_min(a->pclk, b->pclk);
+ dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+ u32 result;
+
+ result = freq * time_us;
+ result = DIV_ROUND_UP(result, 1000 * 1000);
+
+ return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+ unsigned int bits = cpu_cur.info->locktime_bits;
+ u32 rate = (u32)clk_get_rate(_clk_xtal);
+ u32 val;
+
+ if (bits == 0) {
+ WARN_ON(1);
+ return;
+ }
+
+ val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+ val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+ printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+ __raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+ int size, ret;
+
+ if (!cpu_cur.info->calc_freqtable)
+ return -EINVAL;
+
+ kfree(ftab);
+ ftab = NULL;
+
+ size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+ size++;
+
+ ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+ if (!ftab) {
+ printk(KERN_ERR "%s: no memory for tables\n", __func__);
+ return -ENOMEM;
+ }
+
+ ftab_size = size;
+
+ ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+ s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+ return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+ int ret = 0;
+
+ if (cpu_cur.info && cpu_cur.board) {
+ ret = s3c_cpufreq_initclks();
+ if (ret)
+ goto out;
+
+ /* get current settings */
+ s3c_cpufreq_getcur(&cpu_cur);
+ s3c_cpufreq_show("cur", &cpu_cur);
+
+ if (cpu_cur.board->auto_io) {
+ ret = s3c_cpufreq_auto_io();
+ if (ret) {
+ printk(KERN_ERR "%s: failed to get io timing\n",
+ __func__);
+ goto out;
+ }
+ }
+
+ if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+ printk(KERN_ERR "%s: no IO support registered\n",
+ __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (!cpu_cur.info->need_pll)
+ cpu_cur.lock_pll = 1;
+
+ s3c_cpufreq_update_loctkime();
+
+ s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+ &cpu_cur.info->max);
+
+ if (cpu_cur.info->calc_freqtable)
+ s3c_cpufreq_build_freq();
+
+ ret = cpufreq_register_driver(&s3c24xx_driver);
+ }
+
+ out:
+ return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+ unsigned int plls_no)
+{
+ struct cpufreq_frequency_table *vals;
+ unsigned int size;
+
+ size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+ vals = kmalloc(size, GFP_KERNEL);
+ if (vals) {
+ memcpy(vals, plls, size);
+ pll_reg = vals;
+
+ /* write a terminating entry, we don't store it in the
+ * table that is stored in the kernel */
+ vals += plls_no;
+ vals->frequency = CPUFREQ_TABLE_END;
+
+ printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+ } else
+ printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+ return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e0da1..5447e60f393 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -81,7 +81,7 @@ static struct cpu_table cpu_ids[] __initdata = {
.map_io = s3c2410_map_io,
.init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
- .init = s3c2410_init,
+ .init = s3c2410a_init,
.name = name_s3c2410a
},
{
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..f52a92ce8dd 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -26,6 +26,8 @@
#include <asm/mach/irq.h>
#include <mach/fb.h>
#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <plat/regs-serial.h>
@@ -180,25 +182,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
}
}
-/* NAND Controller */
-
-static struct resource s3c_nand_resource[] = {
- [0] = {
- .start = S3C24XX_PA_NAND,
- .end = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-struct platform_device s3c_device_nand = {
- .name = "s3c2410-nand",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_nand_resource),
- .resource = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
/* USB Device (Gadget)*/
static struct resource s3c_usbgadget_resource[] = {
@@ -348,7 +331,7 @@ struct platform_device s3c_device_adc = {
/* HWMON */
struct platform_device s3c_device_hwmon = {
- .name = "s3c24xx-hwmon",
+ .name = "s3c-hwmon",
.id = -1,
.dev.parent = &s3c_device_adc.dev,
};
@@ -473,4 +456,52 @@ struct platform_device s3c_device_camif = {
EXPORT_SYMBOL(s3c_device_camif);
+/* AC97 */
+
+static struct resource s3c_ac97_resource[] = {
+ [0] = {
+ .start = S3C2440_PA_AC97,
+ .end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3C244x_AC97,
+ .end = IRQ_S3C244x_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "PCM out",
+ .start = DMACH_PCM_OUT,
+ .end = DMACH_PCM_OUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .name = "PCM in",
+ .start = DMACH_PCM_IN,
+ .end = DMACH_PCM_IN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .name = "Mic in",
+ .start = DMACH_MIC_IN,
+ .end = DMACH_MIC_IN,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ac97 = {
+ .name = "s3c-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_ac97_resource),
+ .resource = s3c_ac97_resource,
+ .dev = {
+ .dma_mask = &s3c_device_ac97_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+EXPORT_SYMBOL(s3c_device_ac97);
+
#endif // CONFIG_CPU_S32440
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
new file mode 100644
index 00000000000..efeb025affc
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -0,0 +1,282 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+struct seq_file;
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO (8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+ unsigned long bankcon;
+ unsigned int tacp;
+ unsigned int tacs;
+ unsigned int tcos;
+ unsigned int tacc;
+ unsigned int tcoh; /* nCS hold afrer nOE/nWE */
+ unsigned int tcah; /* Address hold after nCS */
+ unsigned char nwait_en; /* nWait enabled for bank. */
+};
+
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+ unsigned int idcy;
+ unsigned int wstrd;
+ unsigned int wstwr;
+ unsigned int wstoen;
+ unsigned int wstwen;
+ unsigned int wstbrd;
+
+ /* register cache */
+ unsigned char smbidcyr;
+ unsigned char smbwstrd;
+ unsigned char smbwstwr;
+ unsigned char smbwstoen;
+ unsigned char smbwstwen;
+ unsigned char smbwstbrd;
+};
+
+union s3c_iobank {
+ struct s3c2410_iobank_timing *io_2410;
+ struct s3c2412_iobank_timing *io_2412;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+ union s3c_iobank bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+ struct s3c_pllval *vals;
+ int size;
+};
+
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+ struct s3c_freq freq;
+ struct s3c_freq max;
+ struct cpufreq_frequency_table pll;
+ struct s3c_clkdivs divs;
+ struct s3c_cpufreq_info *info; /* for core, not drivers */
+ struct s3c_cpufreq_board *board;
+
+ unsigned int lock_pll:1;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * any frequency changes. This is really only need by devices like the
+ * S3C2410 where there is no or limited divider between the PLL and the
+ * ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ * from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ * from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ * current frequency configuration. If the table passed in is NULL,
+ * then the return is the number of elements to be filled for allocation
+ * of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+ const char *name;
+ struct s3c_freq max;
+
+ unsigned int latency;
+
+ unsigned int locktime_m;
+ unsigned int locktime_u;
+ unsigned char locktime_bits;
+
+ unsigned int need_pll:1;
+
+ /* driver routines */
+
+ void (*resume_clocks)(void);
+
+ int (*get_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ void (*set_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ int (*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ int (*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+ struct cpufreq_frequency_table *t,
+ size_t table_size);
+
+ void (*debug_io_show)(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+ void (*set_refresh)(struct s3c_cpufreq_config *cfg);
+ void (*set_fvco)(struct s3c_cpufreq_config *cfg);
+ void (*set_divs)(struct s3c_cpufreq_config *cfg);
+ int (*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+ int index, size_t table_size,
+ unsigned int freq)
+{
+ if (index < 0)
+ return index;
+
+ if (table) {
+ if (index >= table_size)
+ return -ENOMEM;
+
+ s3c_freq_dbg("%s: { %d = %u kHz }\n",
+ __func__, index, freq);
+
+ table[index].index = index;
+ table[index].frequency = freq;
+ }
+
+ return index + 1;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h
new file mode 100644
index 00000000000..8521b8372c5
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/fiq.h
@@ -0,0 +1,13 @@
+/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index a9ac9e29759..b6deeef8f66 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -14,6 +14,7 @@
#ifdef CONFIG_CPU_S3C2410
extern int s3c2410_init(void);
+extern int s3c2410a_init(void);
extern void s3c2410_map_io(void);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 958737775ad..d02f5f02045 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -493,6 +493,38 @@ s3c_irq_demux_extint4t7(unsigned int irq,
}
}
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+ u32 intmod;
+ unsigned offs;
+
+ if (on) {
+ offs = irq - FIQ_START;
+ if (offs > 31)
+ return -EINVAL;
+
+ intmod = 1 << offs;
+ } else {
+ intmod = 0;
+ }
+
+ __raw_writel(intmod, S3C2410_INTMOD);
+ return 0;
+}
+#endif
+
+
/* s3c24xx_init_irq
*
* Initialise S3C2410 IRQ system
@@ -505,6 +537,10 @@ void __init s3c24xx_init_irq(void)
int irqno;
int i;
+#ifdef CONFIG_FIQ
+ init_FIQ();
+#endif
+
irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
/* first, clear all interrupts pending... */
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
new file mode 100644
index 00000000000..43ea80190d8
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ unsigned long refresh;
+ unsigned long refval;
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * down to ensure that we do not overflow 32 bit numbers.
+ *
+ * This should work for HCLK up to 133MHz and refresh period up
+ * to 30usec.
+ */
+
+ refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+ refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
+ refresh = (1 << 11) + 1 - refresh;
+
+ s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+ refval = __raw_readl(S3C2410_REFRESH);
+ refval &= ~((1 << 12) - 1);
+ refval |= refresh;
+ __raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+ __raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
new file mode 100644
index 00000000000..d0a3a145cd4
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -0,0 +1,477 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2410_iobank_timing *bt;
+ int bank;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = timings->bank[bank].io_2410;
+ if (!bt)
+ continue;
+
+ printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+ "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+ print_ns(bt->tacs),
+ print_ns(bt->tcos),
+ print_ns(bt->tacc),
+ print_ns(bt->tcoh),
+ print_ns(bt->tcah));
+ }
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+ return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+ return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+ if (cyc == 0)
+ return 0;
+
+ return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+ unsigned long *v, int shift)
+{
+ unsigned int div = to_div(cyc, hclk_tns);
+ unsigned long val;
+
+ s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+ __func__, cyc, hclk_tns, shift, div);
+
+ switch (div) {
+ case 0:
+ val = 0;
+ break;
+ case 1:
+ val = 1;
+ break;
+ case 2:
+ val = 2;
+ break;
+ case 3:
+ case 4:
+ val = 3;
+ break;
+ default:
+ return -1;
+ }
+
+ *v |= val << shift;
+ return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+ /* Currently no support for Tacp calculations. */
+ return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+ unsigned long hclk_tns, unsigned long *v)
+{
+ unsigned int div = to_div(cyc, hclk_tns);
+ unsigned long val;
+
+ s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+ __func__, cyc, nwait_en, hclk_tns, div);
+
+ /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+ if (nwait_en && div < 4)
+ div = 4;
+
+ switch (div) {
+ case 0:
+ val = 0;
+ break;
+
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ val = div - 1;
+ break;
+
+ case 5:
+ case 6:
+ val = 4;
+ break;
+
+ case 7:
+ case 8:
+ val = 5;
+ break;
+
+ case 9:
+ case 10:
+ val = 6;
+ break;
+
+ case 11:
+ case 12:
+ case 13:
+ case 14:
+ val = 7;
+ break;
+
+ default:
+ return -1;
+ }
+
+ *v |= val << 8;
+ return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
+{
+ unsigned long hclk = cfg->freq.hclk_tns;
+ unsigned long res;
+ int ret;
+
+ res = bt->bankcon;
+ res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+ /* tacp: 2,3,4,5 */
+ /* tcah: 0,1,2,4 */
+ /* tcoh: 0,1,2,4 */
+ /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+ /* tcos: 0,1,2,4 */
+ /* tacs: 0,1,2,4 */
+
+ ret = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+ ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+ ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+ ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+ if (ret)
+ return -EINVAL;
+
+ ret |= calc_tacp(bt->tacp, hclk, &res);
+ ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+ if (ret)
+ return -EINVAL;
+
+ bt->bankcon = res;
+ return 0;
+}
+
+static unsigned int tacc_tab[] = {
+ [0] = 1,
+ [1] = 2,
+ [2] = 3,
+ [3] = 4,
+ [4] = 6,
+ [5] = 9,
+ [6] = 10,
+ [7] = 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+ unsigned long val)
+{
+ val &= 7;
+ return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+ unsigned long val)
+{
+ val &= 3;
+ return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
+{
+ unsigned long bankcon = bt->bankcon;
+ unsigned long hclk = cfg->freq.hclk_tns;
+
+ bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+ bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+ bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+ bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+ bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob)
+{
+ struct s3c2410_iobank_timing *bt = iob->io_2410;
+ unsigned long bankcon = bt->bankcon;
+ unsigned long hclk = cfg->freq.hclk_tns;
+ unsigned int tacs;
+ unsigned int tcos;
+ unsigned int tacc;
+ unsigned int tcoh;
+ unsigned int tcah;
+
+ seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+ tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+ tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+ tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+ tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+ tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+ seq_printf(seq,
+ "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+ print_ns(bt->tacs),
+ print_ns(bt->tcos),
+ print_ns(bt->tacc),
+ print_ns(bt->tcoh),
+ print_ns(bt->tcah));
+
+ seq_printf(seq,
+ "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+ print_ns(tacs),
+ print_ns(tcos),
+ print_ns(tacc),
+ print_ns(tcoh),
+ print_ns(tcah));
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2410_iobank_timing *bt;
+ unsigned long bankcon;
+ int bank;
+ int ret;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bankcon = __raw_readl(bank_reg(bank));
+ bt = iot->bank[bank].io_2410;
+
+ if (!bt)
+ continue;
+
+ bt->bankcon = bankcon;
+
+ ret = s3c2410_calc_bank(cfg, bt);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+ __func__, bank);
+ goto err;
+ }
+
+ s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+ __func__, bank, bt->bankcon);
+ }
+
+ return 0;
+ err:
+ return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2410_iobank_timing *bt;
+ int bank;
+
+ /* set the io timings from the specifier */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2410;
+ if (!bt)
+ continue;
+
+ __raw_writel(bt->bankcon, bank_reg(bank));
+ }
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2410_iobank_timing *bt;
+ unsigned long bankcon;
+ unsigned long bwscon;
+ int bank;
+
+ bwscon = __raw_readl(S3C2410_BWSCON);
+
+ /* look through all banks to see what is currently set. */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bankcon = __raw_readl(bank_reg(bank));
+
+ if (!bank_is_io(bankcon))
+ continue;
+
+ s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+ __func__, bank, bankcon);
+
+ bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+ if (!bt) {
+ printk(KERN_ERR "%s: no memory for bank\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* find out in nWait is enabled for bank. */
+
+ if (bank != 0) {
+ unsigned long tmp = S3C2410_BWSCON_GET(bwscon, bank);
+ if (tmp & S3C2410_BWSCON_WS)
+ bt->nwait_en = 1;
+ }
+
+ timings->bank[bank].io_2410 = bt;
+ bt->bankcon = bankcon;
+
+ s3c2410_iotiming_getbank(cfg, bt);
+ }
+
+ s3c2410_print_timing("get", timings);
+ return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644
index 00000000000..fd45e47facb
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -0,0 +1,285 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ unsigned int bank;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+ "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+ print_ns(bt->idcy),
+ print_ns(bt->wstrd),
+ print_ns(bt->wstwr),
+ print_ns(bt->wstoen),
+ print_ns(bt->wstwen),
+ print_ns(bt->wstbrd));
+ }
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+ return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+ unsigned int *err)
+{
+ unsigned int ret = to_div(hwtm, clk_tns);
+
+ if (ret > 0xf)
+ *err = -EINVAL;
+
+ return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+ struct s3c2412_iobank_timing *bt)
+{
+ unsigned int hclk = cfg->freq.hclk_tns;
+ int err = 0;
+
+ bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+ bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+ bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+ bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+ bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+ bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+ return err;
+}
+
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob)
+{
+ struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+ seq_printf(seq,
+ "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+ "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+ print_ns(bt->idcy),
+ print_ns(bt->wstrd),
+ print_ns(bt->wstwr),
+ print_ns(bt->wstoen),
+ print_ns(bt->wstwen),
+ print_ns(bt->wstbrd));
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ int bank;
+ int ret;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ ret = s3c2412_calc_bank(cfg, bt);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+ __func__, bank);
+ goto err;
+ }
+ }
+
+ return 0;
+ err:
+ return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ void __iomem *regs;
+ int bank;
+
+ /* set the io timings from the specifier */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ regs = S3C2412_SSMC_BANK(bank);
+
+ __raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+ __raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+ __raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+ __raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+ __raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+ __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+ }
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+ return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2412_iobank_timing *bt,
+ unsigned int bank)
+{
+ unsigned long clk = cfg->freq.hclk_tns; /* ssmc clock??? */
+ void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+ bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+ bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+ bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+ bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+ bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+ if (bank < 2)
+ return true;
+
+ return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2412_iobank_timing *bt;
+ u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+ unsigned int bank;
+
+ /* look through all banks to see what is currently set. */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ if (!bank_is_io(bank, bankcfg))
+ continue;
+
+ bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+ if (!bt) {
+ printk(KERN_ERR "%s: no memory for bank\n", __func__);
+ return -ENOMEM;
+ }
+
+ timings->bank[bank].io_2412 = bt;
+ s3c2412_iotiming_getbank(cfg, bt, bank);
+ }
+
+ s3c2412_print_timing("get", timings);
+ return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ u32 refresh;
+
+ WARN_ON(board == NULL);
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * down to ensure that we do not overflow 32 bit numbers.
+ *
+ * This should work for HCLK up to 133MHz and refresh period up
+ * to 30usec.
+ */
+
+ refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+ refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
+ refresh &= ((1 << 16) - 1);
+
+ s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+ __raw_writel(refresh, S3C2412_REFRESH);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
new file mode 100644
index 00000000000..ae2e6c604f2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -0,0 +1,311 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+ long diff = a - b;
+
+ return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned int hdiv, pdiv;
+ unsigned long hclk, fclk, armclk;
+ unsigned long hclk_max;
+
+ fclk = cfg->freq.fclk;
+ armclk = cfg->freq.armclk;
+ hclk_max = cfg->max.hclk;
+
+ s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+ __func__, fclk, armclk, hclk_max);
+
+ if (armclk > fclk) {
+ printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+ armclk = fclk;
+ }
+
+ /* if we are in DVS, we need HCLK to be <= ARMCLK */
+ if (armclk < fclk && armclk < hclk_max)
+ hclk_max = armclk;
+
+ for (hdiv = 1; hdiv < 9; hdiv++) {
+ if (hdiv == 5 || hdiv == 7)
+ hdiv++;
+
+ hclk = (fclk / hdiv);
+ if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+ break;
+ }
+
+ s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+ if (hdiv > 8)
+ goto invalid;
+
+ pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+ if ((hclk / pdiv) > cfg->max.pclk)
+ pdiv++;
+
+ s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+ if (pdiv > 2)
+ goto invalid;
+
+ pdiv *= hdiv;
+
+ /* calculate a valid armclk */
+
+ if (armclk < hclk)
+ armclk = hclk;
+
+ /* if we're running armclk lower than fclk, this really means
+ * that the system should go into dvs mode, which means that
+ * armclk is connected to hclk. */
+ if (armclk < fclk) {
+ cfg->divs.dvs = 1;
+ armclk = hclk;
+ } else
+ cfg->divs.dvs = 0;
+
+ cfg->freq.armclk = armclk;
+
+ /* store the result, and then return */
+
+ cfg->divs.h_divisor = hdiv;
+ cfg->divs.p_divisor = pdiv;
+
+ return 0;
+
+ invalid:
+ return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+ S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long clkdiv, camdiv;
+
+ s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+ cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+ clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+ camdiv &= ~CAMDIVN_HCLK_HALF;
+
+ switch (cfg->divs.h_divisor) {
+ case 1:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+ break;
+
+ case 2:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+ break;
+
+ case 6:
+ camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+ case 3:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+ break;
+
+ case 8:
+ camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+ case 4:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+ break;
+
+ default:
+ BUG(); /* we don't expect to get here. */
+ }
+
+ if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+ clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+ /* todo - set pclk. */
+
+ /* Write the divisors first with hclk intentionally halved so that
+ * when we write clkdiv we will under-frequency instead of over. We
+ * then make a short delay and remove the hclk halving if necessary.
+ */
+
+ __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ ndelay(20);
+ __raw_writel(camdiv, S3C2440_CAMDIVN);
+
+ clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+ int *divs,
+ struct cpufreq_frequency_table *table,
+ size_t table_size)
+{
+ unsigned long freq;
+ int index = 0;
+ int div;
+
+ for (div = *divs; div > 0; div = *divs++) {
+ freq = fclk / div;
+
+ if (freq > max_hclk && div != 1)
+ continue;
+
+ freq /= 1000; /* table is in kHz */
+ index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+ if (index < 0)
+ break;
+ }
+
+ return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+ struct cpufreq_frequency_table *table,
+ size_t table_size)
+{
+ int ret;
+
+ WARN_ON(cfg->info == NULL);
+ WARN_ON(cfg->board == NULL);
+
+ ret = run_freq_for(cfg->info->max.hclk,
+ cfg->info->max.fclk,
+ hclk_divs,
+ table, table_size);
+
+ s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+ return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+ .max = {
+ .fclk = 400000000,
+ .hclk = 133333333,
+ .pclk = 66666666,
+ },
+
+ .locktime_m = 300,
+ .locktime_u = 300,
+ .locktime_bits = 16,
+
+ .name = "s3c244x",
+ .calc_iotiming = s3c2410_iotiming_calc,
+ .set_iotiming = s3c2410_iotiming_set,
+ .get_iotiming = s3c2410_iotiming_get,
+ .set_fvco = s3c2410_set_fvco,
+
+ .set_refresh = s3c2410_cpufreq_setrefresh,
+ .set_divs = s3c2440_cpufreq_setdivs,
+ .calc_divs = s3c2440_cpufreq_calcdivs,
+ .calc_freqtable = s3c2440_cpufreq_calctable,
+
+ .resume_clocks = s3c244x_setup_clocks,
+
+ .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+{
+ xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+ hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+ fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+ armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+ if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+ printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+ return -ENOENT;
+ }
+
+ return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2440_cpufreq_driver = {
+ .add = s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass,
+ &s3c2440_cpufreq_driver);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct sysdev_driver s3c2442_cpufreq_driver = {
+ .add = s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass,
+ &s3c2442_cpufreq_driver);
+}
+
+subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
new file mode 100644
index 00000000000..ff9443b233a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+ { .frequency = 75000000, .index = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */
+ { .frequency = 80000000, .index = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */
+ { .frequency = 90000000, .index = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */
+ { .frequency = 100000000, .index = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */
+ { .frequency = 110000000, .index = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */
+ { .frequency = 120000000, .index = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */
+ { .frequency = 150000000, .index = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */
+ { .frequency = 160000000, .index = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */
+ { .frequency = 170000000, .index = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */
+ { .frequency = 180000000, .index = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */
+ { .frequency = 190000000, .index = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */
+ { .frequency = 200000000, .index = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */
+ { .frequency = 210000000, .index = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */
+ { .frequency = 220000000, .index = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */
+ { .frequency = 230000000, .index = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */
+ { .frequency = 240000000, .index = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */
+ { .frequency = 300000000, .index = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */
+ { .frequency = 310000000, .index = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */
+ { .frequency = 320000000, .index = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */
+ { .frequency = 330000000, .index = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */
+ { .frequency = 340000000, .index = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */
+ { .frequency = 350000000, .index = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */
+ { .frequency = 360000000, .index = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */
+ { .frequency = 370000000, .index = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */
+ { .frequency = 380000000, .index = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */
+ { .frequency = 390000000, .index = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */
+ { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal_clk))
+ return PTR_ERR(xtal_clk);
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ if (xtal == 12000000) {
+ printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+ return s3c_plltab_register(s3c2440_plls_12,
+ ARRAY_SIZE(s3c2440_plls_12));
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+ .add = s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+ .add = s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
new file mode 100644
index 00000000000..7679af13a94
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+ { .frequency = 78019200, .index = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */
+ { .frequency = 84067200, .index = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */
+ { .frequency = 90115200, .index = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */
+ { .frequency = 96163200, .index = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */
+ { .frequency = 102135600, .index = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */
+ { .frequency = 108259200, .index = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */
+ { .frequency = 114307200, .index = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */
+ { .frequency = 120234240, .index = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */
+ { .frequency = 126161280, .index = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */
+ { .frequency = 132088320, .index = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */
+ { .frequency = 138015360, .index = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */
+ { .frequency = 144789120, .index = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */
+ { .frequency = 150100363, .index = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */
+ { .frequency = 156038400, .index = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */
+ { .frequency = 162086400, .index = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */
+ { .frequency = 168134400, .index = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */
+ { .frequency = 174048000, .index = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */
+ { .frequency = 180230400, .index = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */
+ { .frequency = 186278400, .index = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */
+ { .frequency = 192326400, .index = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */
+ { .frequency = 198132480, .index = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */
+ { .frequency = 204271200, .index = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */
+ { .frequency = 210268800, .index = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */
+ { .frequency = 216518400, .index = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */
+ { .frequency = 222264000, .index = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */
+ { .frequency = 228614400, .index = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */
+ { .frequency = 234259200, .index = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */
+ { .frequency = 240468480, .index = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */
+ { .frequency = 246960000, .index = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */
+ { .frequency = 252322560, .index = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */
+ { .frequency = 258249600, .index = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */
+ { .frequency = 264176640, .index = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */
+ { .frequency = 270950400, .index = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */
+ { .frequency = 276030720, .index = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */
+ { .frequency = 282240000, .index = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */
+ { .frequency = 289578240, .index = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */
+ { .frequency = 294235200, .index = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */
+ { .frequency = 300200727, .index = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */
+ { .frequency = 306358690, .index = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */
+ { .frequency = 312076800, .index = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */
+ { .frequency = 318366720, .index = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */
+ { .frequency = 324172800, .index = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */
+ { .frequency = 330220800, .index = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */
+ { .frequency = 336268800, .index = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */
+ { .frequency = 342074880, .index = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */
+ { .frequency = 348096000, .index = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */
+ { .frequency = 355622400, .index = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */
+ { .frequency = 360460800, .index = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */
+ { .frequency = 366206400, .index = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */
+ { .frequency = 372556800, .index = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */
+ { .frequency = 378201600, .index = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */
+ { .frequency = 384652800, .index = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */
+ { .frequency = 391608000, .index = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */
+ { .frequency = 396264960, .index = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */
+ { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal_clk))
+ return PTR_ERR(xtal_clk);
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ if (xtal == 169344000) {
+ printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+ return s3c_plltab_register(s3c2440_plls_169344,
+ ARRAY_SIZE(s3c2440_plls_169344));
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+ .add = s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass,
+ &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+ .add = s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass,
+ &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
new file mode 100644
index 00000000000..89fcf5308cf
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+ int enable)
+{
+
+ printk(KERN_INFO "%s(%d)\n", __func__, enable);
+ if (enable) {
+ s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+ s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
+ s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
+ } else {
+ s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
+ s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
+ s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+ }
+}
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 5ebd8b425a5..bcfa778614d 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
select S3C_GPIO_PULL_UPDOWN
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
+ select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
help
Base platform code for any Samsung S3C64XX device
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 3c8882cd626..b85b4359e93 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -40,4 +40,5 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o \ No newline at end of file
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
index 1322beb40dd..1322beb40dd 100644
--- a/arch/arm/plat-s3c/dev-audio.c
+++ b/arch/arm/plat-s3c64xx/dev-audio.c
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
new file mode 100644
index 00000000000..a8a711c3c06
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -0,0 +1,50 @@
+# arch/arm/plat-s5pc1xx/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+# Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+config PLAT_S5PC1XX
+ bool
+ depends on ARCH_S5PC1XX
+ default y
+ select PLAT_S3C
+ select ARM_VIC
+ select NO_IOPORT
+ select ARCH_REQUIRE_GPIOLIB
+ select S3C_GPIO_TRACK
+ select S3C_GPIO_PULL_UPDOWN
+ help
+ Base platform code for any Samsung S5PC1XX device
+
+if PLAT_S5PC1XX
+
+# Configuration options shared by all S3C64XX implementations
+
+config CPU_S5PC100_INIT
+ bool
+ help
+ Common initialisation code for the S5PC1XX
+
+config CPU_S5PC100_CLOCK
+ bool
+ help
+ Common clock support code for the S5PC1XX
+
+# platform specific device setup
+
+config S5PC100_SETUP_I2C0
+ bool
+ default y
+ help
+ Common setup code for i2c bus 0.
+
+ Note, currently since i2c0 is always compiled, this setup helper
+ is always compiled with it.
+
+config S5PC100_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
new file mode 100644
index 00000000000..f1ecb2c37ee
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -0,0 +1,26 @@
+# arch/arm/plat-s5pc1xx/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n := dummy.o
+obj- :=
+
+# Core files
+
+obj-y += dev-uart.o
+obj-y += cpu.o
+obj-y += irq.o
+
+# CPU support
+
+obj-$(CONFIG_CPU_S5PC100_INIT) += s5pc100-init.o
+obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
new file mode 100644
index 00000000000..715a7330794
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/plat-s5pc1xx/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX CPU Support
+ *
+ * Based on plat-s3c64xx/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s5pc100.h>
+
+/* table of supported CPUs */
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = 0x43100000,
+ .idmask = 0xfffff000,
+ .map_io = s5pc100_map_io,
+ .init_clocks = s5pc100_init_clocks,
+ .init_uarts = s5pc100_init_uarts,
+ .init = s5pc100_init,
+ .name = name_s5pc100,
+ },
+};
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xffff)
+
+static struct map_desc s5pc1xx_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5PC1XX_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID),
+ .length = SZ_16,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_CLK,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_CLK),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_PWR,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_PWR),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)(S5PC1XX_VA_UART),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_UART),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_VIC(0),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(0)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_VIC(1),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(1)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_VIC(2),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(2)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_TIMER,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_TIMER),
+ .length = SZ_256,
+ .type = MT_DEVICE,
+ },
+};
+
+/* read cpu identification code */
+
+void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
+{
+ unsigned long idcode;
+
+ /* initialise the io descriptors we need for initialisation */
+ iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
+ iotable_init(mach_desc, size);
+
+ idcode = __raw_readl(S5PC1XX_VA_CHIPID);
+ s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
new file mode 100644
index 00000000000..f749bc5407b
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -0,0 +1,174 @@
+/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on plat-s3c64xx/dev-uart.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s5pc1xx_uart0_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART0,
+ .end = S3C_PA_UART0 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX0,
+ .end = IRQ_S3CUART_RX0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX0,
+ .end = IRQ_S3CUART_TX0,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR0,
+ .end = IRQ_S3CUART_ERR0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s5pc1xx_uart1_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART1,
+ .end = S3C_PA_UART1 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX1,
+ .end = IRQ_S3CUART_RX1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX1,
+ .end = IRQ_S3CUART_TX1,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR1,
+ .end = IRQ_S3CUART_ERR1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource s5pc1xx_uart2_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART2,
+ .end = S3C_PA_UART2 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX2,
+ .end = IRQ_S3CUART_RX2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX2,
+ .end = IRQ_S3CUART_TX2,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR2,
+ .end = IRQ_S3CUART_ERR2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource s5pc1xx_uart3_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART3,
+ .end = S3C_PA_UART3 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX3,
+ .end = IRQ_S3CUART_RX3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX3,
+ .end = IRQ_S3CUART_TX3,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR3,
+ .end = IRQ_S3CUART_ERR3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s5pc1xx_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource),
+ },
+ [1] = {
+ .resources = s5pc1xx_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource),
+ },
+ [2] = {
+ .resources = s5pc1xx_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource),
+ },
+ [3] = {
+ .resources = s5pc1xx_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
+ },
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+ .id = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+ .id = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+ .id = 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+ .id = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+ &s3c24xx_uart_device0,
+ &s3c24xx_uart_device1,
+ &s3c24xx_uart_device2,
+ &s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
new file mode 100644
index 00000000000..f07d8c3b25d
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Common IRQ support
+ *
+ * Based on plat-s3c64xx/include/plat/irqs.h
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
+#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET (32)
+
+#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
+
+#define S3C_VIC0_BASE S3C_IRQ(0)
+#define S3C_VIC1_BASE S3C_IRQ(32)
+#define S3C_VIC2_BASE S3C_IRQ(64)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0 (16)
+#define IRQ_S3CUART_BASE1 (20)
+#define IRQ_S3CUART_BASE2 (24)
+#define IRQ_S3CUART_BASE3 (28)
+
+#define UART_IRQ_RXD (0)
+#define UART_IRQ_ERR (1)
+#define UART_IRQ_TXD (2)
+#define UART_IRQ_MODEM (3)
+
+#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S5PC1XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x))
+#define S5PC1XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x))
+#define S5PC1XX_IRQ_VIC2(x) (S3C_VIC2_BASE + (x))
+
+/*
+ * VIC0: system, DMA, timer
+ */
+#define IRQ_EINT0 S5PC1XX_IRQ_VIC0(0)
+#define IRQ_EINT1 S5PC1XX_IRQ_VIC0(1)
+#define IRQ_EINT2 S5PC1XX_IRQ_VIC0(2)
+#define IRQ_EINT3 S5PC1XX_IRQ_VIC0(3)
+#define IRQ_EINT4 S5PC1XX_IRQ_VIC0(4)
+#define IRQ_EINT5 S5PC1XX_IRQ_VIC0(5)
+#define IRQ_EINT6 S5PC1XX_IRQ_VIC0(6)
+#define IRQ_EINT7 S5PC1XX_IRQ_VIC0(7)
+#define IRQ_EINT8 S5PC1XX_IRQ_VIC0(8)
+#define IRQ_EINT9 S5PC1XX_IRQ_VIC0(9)
+#define IRQ_EINT10 S5PC1XX_IRQ_VIC0(10)
+#define IRQ_EINT11 S5PC1XX_IRQ_VIC0(11)
+#define IRQ_EINT12 S5PC1XX_IRQ_VIC0(12)
+#define IRQ_EINT13 S5PC1XX_IRQ_VIC0(13)
+#define IRQ_EINT14 S5PC1XX_IRQ_VIC0(14)
+#define IRQ_EINT15 S5PC1XX_IRQ_VIC0(15)
+#define IRQ_EINT16_31 S5PC1XX_IRQ_VIC0(16)
+#define IRQ_BATF S5PC1XX_IRQ_VIC0(17)
+#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18)
+#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19)
+#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20)
+#define IRQ_TIMER0 S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1 S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2 S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3 S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4 S5PC1XX_IRQ_VIC0(25)
+#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26)
+#define IRQ_WDT S5PC1XX_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28)
+#define IRQ_RTC_TIC S5PC1XX_IRQ_VIC0(29)
+#define IRQ_GPIOINT S5PC1XX_IRQ_VIC0(30)
+
+/*
+ * VIC1: ARM, power, memory, connectivity
+ */
+#define IRQ_CORTEX0 S5PC1XX_IRQ_VIC1(0)
+#define IRQ_CORTEX1 S5PC1XX_IRQ_VIC1(1)
+#define IRQ_CORTEX2 S5PC1XX_IRQ_VIC1(2)
+#define IRQ_CORTEX3 S5PC1XX_IRQ_VIC1(3)
+#define IRQ_CORTEX4 S5PC1XX_IRQ_VIC1(4)
+#define IRQ_IEMAPC S5PC1XX_IRQ_VIC1(5)
+#define IRQ_IEMIEC S5PC1XX_IRQ_VIC1(6)
+#define IRQ_ONENAND S5PC1XX_IRQ_VIC1(7)
+#define IRQ_NFC S5PC1XX_IRQ_VIC1(8)
+#define IRQ_CFC S5PC1XX_IRQ_VIC1(9)
+#define IRQ_UART0 S5PC1XX_IRQ_VIC1(10)
+#define IRQ_UART1 S5PC1XX_IRQ_VIC1(11)
+#define IRQ_UART2 S5PC1XX_IRQ_VIC1(12)
+#define IRQ_UART3 S5PC1XX_IRQ_VIC1(13)
+#define IRQ_IIC S5PC1XX_IRQ_VIC1(14)
+#define IRQ_SPI0 S5PC1XX_IRQ_VIC1(15)
+#define IRQ_SPI1 S5PC1XX_IRQ_VIC1(16)
+#define IRQ_SPI2 S5PC1XX_IRQ_VIC1(17)
+#define IRQ_IRDA S5PC1XX_IRQ_VIC1(18)
+#define IRQ_CAN0 S5PC1XX_IRQ_VIC1(19)
+#define IRQ_CAN1 S5PC1XX_IRQ_VIC1(20)
+#define IRQ_HSIRX S5PC1XX_IRQ_VIC1(21)
+#define IRQ_HSITX S5PC1XX_IRQ_VIC1(22)
+#define IRQ_UHOST S5PC1XX_IRQ_VIC1(23)
+#define IRQ_OTG S5PC1XX_IRQ_VIC1(24)
+#define IRQ_MSM S5PC1XX_IRQ_VIC1(25)
+#define IRQ_HSMMC0 S5PC1XX_IRQ_VIC1(26)
+#define IRQ_HSMMC1 S5PC1XX_IRQ_VIC1(27)
+#define IRQ_HSMMC2 S5PC1XX_IRQ_VIC1(28)
+#define IRQ_MIPICSI S5PC1XX_IRQ_VIC1(29)
+#define IRQ_MIPIDSI S5PC1XX_IRQ_VIC1(30)
+
+/*
+ * VIC2: multimedia, audio, security
+ */
+#define IRQ_LCD0 S5PC1XX_IRQ_VIC2(0)
+#define IRQ_LCD1 S5PC1XX_IRQ_VIC2(1)
+#define IRQ_LCD2 S5PC1XX_IRQ_VIC2(2)
+#define IRQ_LCD3 S5PC1XX_IRQ_VIC2(3)
+#define IRQ_ROTATOR S5PC1XX_IRQ_VIC2(4)
+#define IRQ_FIMC0 S5PC1XX_IRQ_VIC2(5)
+#define IRQ_FIMC1 S5PC1XX_IRQ_VIC2(6)
+#define IRQ_FIMC2 S5PC1XX_IRQ_VIC2(7)
+#define IRQ_JPEG S5PC1XX_IRQ_VIC2(8)
+#define IRQ_2D S5PC1XX_IRQ_VIC2(9)
+#define IRQ_3D S5PC1XX_IRQ_VIC2(10)
+#define IRQ_MIXER S5PC1XX_IRQ_VIC2(11)
+#define IRQ_HDMI S5PC1XX_IRQ_VIC2(12)
+#define IRQ_IIC1 S5PC1XX_IRQ_VIC2(13)
+#define IRQ_MFC S5PC1XX_IRQ_VIC2(14)
+#define IRQ_TVENC S5PC1XX_IRQ_VIC2(15)
+#define IRQ_I2S0 S5PC1XX_IRQ_VIC2(16)
+#define IRQ_I2S1 S5PC1XX_IRQ_VIC2(17)
+#define IRQ_I2S2 S5PC1XX_IRQ_VIC2(18)
+#define IRQ_AC97 S5PC1XX_IRQ_VIC2(19)
+#define IRQ_PCM0 S5PC1XX_IRQ_VIC2(20)
+#define IRQ_PCM1 S5PC1XX_IRQ_VIC2(21)
+#define IRQ_SPDIF S5PC1XX_IRQ_VIC2(22)
+#define IRQ_ADC S5PC1XX_IRQ_VIC2(23)
+#define IRQ_PENDN S5PC1XX_IRQ_VIC2(24)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_KEYPAD S5PC1XX_IRQ_VIC2(25)
+#define IRQ_CG S5PC1XX_IRQ_VIC2(26)
+#define IRQ_SEC S5PC1XX_IRQ_VIC2(27)
+#define IRQ_SECRX S5PC1XX_IRQ_VIC2(28)
+#define IRQ_SECTX S5PC1XX_IRQ_VIC2(29)
+#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30)
+#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31)
+
+#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 1)
+
+#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x) S3C_EINT(x)
+
+#define NR_IRQS (IRQ_EINT(31)+1)
+
+#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
new file mode 100644
index 00000000000..21afef1573e
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/pll.h
@@ -0,0 +1,38 @@
+/* arch/arm/plat-s5pc1xx/include/plat/pll.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX PLL code
+ *
+ * Based on plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5P_PLL_MDIV_MASK ((1 << (25-16+1)) - 1)
+#define S5P_PLL_PDIV_MASK ((1 << (13-8+1)) - 1)
+#define S5P_PLL_SDIV_MASK ((1 << (2-0+1)) - 1)
+#define S5P_PLL_MDIV_SHIFT (16)
+#define S5P_PLL_PDIV_SHIFT (8)
+#define S5P_PLL_SDIV_SHIFT (0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
+ u32 pllcon)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
+ pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
+ sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
new file mode 100644
index 00000000000..75c8390cb82
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -0,0 +1,421 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S5PC1XX_CLKREG(x) (S5PC1XX_VA_CLK + (x))
+
+#define S5PC1XX_APLL_LOCK S5PC1XX_CLKREG(0x00)
+#define S5PC1XX_MPLL_LOCK S5PC1XX_CLKREG(0x04)
+#define S5PC1XX_EPLL_LOCK S5PC1XX_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK S5PC1XX_CLKREG(0x0C)
+
+#define S5PC1XX_APLL_CON S5PC1XX_CLKREG(0x100)
+#define S5PC1XX_MPLL_CON S5PC1XX_CLKREG(0x104)
+#define S5PC1XX_EPLL_CON S5PC1XX_CLKREG(0x108)
+#define S5PC100_HPLL_CON S5PC1XX_CLKREG(0x10C)
+
+#define S5PC1XX_CLK_SRC0 S5PC1XX_CLKREG(0x200)
+#define S5PC1XX_CLK_SRC1 S5PC1XX_CLKREG(0x204)
+#define S5PC1XX_CLK_SRC2 S5PC1XX_CLKREG(0x208)
+#define S5PC1XX_CLK_SRC3 S5PC1XX_CLKREG(0x20C)
+
+#define S5PC1XX_CLK_DIV0 S5PC1XX_CLKREG(0x300)
+#define S5PC1XX_CLK_DIV1 S5PC1XX_CLKREG(0x304)
+#define S5PC1XX_CLK_DIV2 S5PC1XX_CLKREG(0x308)
+#define S5PC1XX_CLK_DIV3 S5PC1XX_CLKREG(0x30C)
+#define S5PC1XX_CLK_DIV4 S5PC1XX_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT S5PC1XX_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00 S5PC1XX_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01 S5PC1XX_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02 S5PC1XX_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10 S5PC1XX_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11 S5PC1XX_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12 S5PC1XX_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13 S5PC1XX_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14 S5PC1XX_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15 S5PC1XX_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20 S5PC1XX_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0 S5PC1XX_CLKREG(0x560)
+#define S5PC100_SCLKGATE1 S5PC1XX_CLKREG(0x564)
+
+#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200)
+
+#define S5PC1XX_EPLL_EN (1<<31)
+#define S5PC1XX_EPLL_MASK 0xffffffff
+#define S5PC1XX_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKSRC0 */
+#define S5PC1XX_CLKSRC0_APLL_MASK (0x1<<0)
+#define S5PC1XX_CLKSRC0_APLL_SHIFT (0)
+#define S5PC1XX_CLKSRC0_MPLL_MASK (0x1<<4)
+#define S5PC1XX_CLKSRC0_MPLL_SHIFT (4)
+#define S5PC1XX_CLKSRC0_EPLL_MASK (0x1<<8)
+#define S5PC1XX_CLKSRC0_EPLL_SHIFT (8)
+#define S5PC100_CLKSRC0_HPLL_MASK (0x1<<12)
+#define S5PC100_CLKSRC0_HPLL_SHIFT (12)
+#define S5PC100_CLKSRC0_AMMUX_MASK (0x1<<16)
+#define S5PC100_CLKSRC0_AMMUX_SHIFT (16)
+#define S5PC100_CLKSRC0_HREF_MASK (0x1<<20)
+#define S5PC100_CLKSRC0_HREF_SHIFT (20)
+#define S5PC1XX_CLKSRC0_ONENAND_MASK (0x1<<24)
+#define S5PC1XX_CLKSRC0_ONENAND_SHIFT (24)
+
+
+/* CLKSRC1 */
+#define S5PC100_CLKSRC1_UART_MASK (0x1<<0)
+#define S5PC100_CLKSRC1_UART_SHIFT (0)
+#define S5PC100_CLKSRC1_SPI0_MASK (0x3<<4)
+#define S5PC100_CLKSRC1_SPI0_SHIFT (4)
+#define S5PC100_CLKSRC1_SPI1_MASK (0x3<<8)
+#define S5PC100_CLKSRC1_SPI1_SHIFT (8)
+#define S5PC100_CLKSRC1_SPI2_MASK (0x3<<12)
+#define S5PC100_CLKSRC1_SPI2_SHIFT (12)
+#define S5PC100_CLKSRC1_IRDA_MASK (0x3<<16)
+#define S5PC100_CLKSRC1_IRDA_SHIFT (16)
+#define S5PC100_CLKSRC1_UHOST_MASK (0x3<<20)
+#define S5PC100_CLKSRC1_UHOST_SHIFT (20)
+#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24)
+#define S5PC100_CLKSRC1_CLK48M_SHIFT (24)
+
+/* CLKSRC2 */
+#define S5PC100_CLKSRC2_MMC0_MASK (0x3<<0)
+#define S5PC100_CLKSRC2_MMC0_SHIFT (0)
+#define S5PC100_CLKSRC2_MMC1_MASK (0x3<<4)
+#define S5PC100_CLKSRC2_MMC1_SHIFT (4)
+#define S5PC100_CLKSRC2_MMC2_MASK (0x3<<8)
+#define S5PC100_CLKSRC2_MMC2_SHIFT (8)
+#define S5PC100_CLKSRC2_LCD_MASK (0x3<<12)
+#define S5PC100_CLKSRC2_LCD_SHIFT (12)
+#define S5PC100_CLKSRC2_FIMC0_MASK (0x3<<16)
+#define S5PC100_CLKSRC2_FIMC0_SHIFT (16)
+#define S5PC100_CLKSRC2_FIMC1_MASK (0x3<<20)
+#define S5PC100_CLKSRC2_FIMC1_SHIFT (20)
+#define S5PC100_CLKSRC2_FIMC2_MASK (0x3<<24)
+#define S5PC100_CLKSRC2_FIMC2_SHIFT (24)
+#define S5PC100_CLKSRC2_MIXER_MASK (0x3<<28)
+#define S5PC100_CLKSRC2_MIXER_SHIFT (28)
+
+/* CLKSRC3 */
+#define S5PC100_CLKSRC3_PWI_MASK (0x3<<0)
+#define S5PC100_CLKSRC3_PWI_SHIFT (0)
+#define S5PC100_CLKSRC3_HCLKD2_MASK (0x1<<4)
+#define S5PC100_CLKSRC3_HCLKD2_SHIFT (4)
+#define S5PC100_CLKSRC3_I2SD2_MASK (0x3<<8)
+#define S5PC100_CLKSRC3_I2SD2_SHIFT (8)
+#define S5PC100_CLKSRC3_AUDIO0_MASK (0x7<<12)
+#define S5PC100_CLKSRC3_AUDIO0_SHIFT (12)
+#define S5PC100_CLKSRC3_AUDIO1_MASK (0x7<<16)
+#define S5PC100_CLKSRC3_AUDIO1_SHIFT (16)
+#define S5PC100_CLKSRC3_AUDIO2_MASK (0x7<<20)
+#define S5PC100_CLKSRC3_AUDIO2_SHIFT (20)
+#define S5PC100_CLKSRC3_SPDIF_MASK (0x3<<24)
+#define S5PC100_CLKSRC3_SPDIF_SHIFT (24)
+
+
+/* CLKDIV0 */
+#define S5PC1XX_CLKDIV0_APLL_MASK (0x1<<0)
+#define S5PC1XX_CLKDIV0_APLL_SHIFT (0)
+#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4)
+#define S5PC100_CLKDIV0_ARM_SHIFT (4)
+#define S5PC100_CLKDIV0_D0_MASK (0x7<<8)
+#define S5PC100_CLKDIV0_D0_SHIFT (8)
+#define S5PC100_CLKDIV0_PCLKD0_MASK (0x7<<12)
+#define S5PC100_CLKDIV0_PCLKD0_SHIFT (12)
+#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16)
+#define S5PC100_CLKDIV0_SECSS_SHIFT (16)
+
+/* CLKDIV1 */
+#define S5PC100_CLKDIV1_AM_MASK (0x7<<0)
+#define S5PC100_CLKDIV1_AM_SHIFT (0)
+#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4)
+#define S5PC100_CLKDIV1_MPLL_SHIFT (4)
+#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8)
+#define S5PC100_CLKDIV1_MPLL2_SHIFT (8)
+#define S5PC100_CLKDIV1_D1_MASK (0x7<<12)
+#define S5PC100_CLKDIV1_D1_SHIFT (12)
+#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16)
+#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16)
+#define S5PC100_CLKDIV1_ONENAND_MASK (0x3<<20)
+#define S5PC100_CLKDIV1_ONENAND_SHIFT (20)
+#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24)
+#define S5PC100_CLKDIV1_CAM_SHIFT (24)
+
+/* CLKDIV2 */
+#define S5PC100_CLKDIV2_UART_MASK (0x7<<0)
+#define S5PC100_CLKDIV2_UART_SHIFT (0)
+#define S5PC100_CLKDIV2_SPI0_MASK (0xf<<4)
+#define S5PC100_CLKDIV2_SPI0_SHIFT (4)
+#define S5PC100_CLKDIV2_SPI1_MASK (0xf<<8)
+#define S5PC100_CLKDIV2_SPI1_SHIFT (8)
+#define S5PC100_CLKDIV2_SPI2_MASK (0xf<<12)
+#define S5PC100_CLKDIV2_SPI2_SHIFT (12)
+#define S5PC100_CLKDIV2_IRDA_MASK (0xf<<16)
+#define S5PC100_CLKDIV2_IRDA_SHIFT (16)
+#define S5PC100_CLKDIV2_UHOST_MASK (0xf<<20)
+#define S5PC100_CLKDIV2_UHOST_SHIFT (20)
+
+/* CLKDIV3 */
+#define S5PC100_CLKDIV3_MMC0_MASK (0xf<<0)
+#define S5PC100_CLKDIV3_MMC0_SHIFT (0)
+#define S5PC100_CLKDIV3_MMC1_MASK (0xf<<4)
+#define S5PC100_CLKDIV3_MMC1_SHIFT (4)
+#define S5PC100_CLKDIV3_MMC2_MASK (0xf<<8)
+#define S5PC100_CLKDIV3_MMC2_SHIFT (8)
+#define S5PC100_CLKDIV3_LCD_MASK (0xf<<12)
+#define S5PC100_CLKDIV3_LCD_SHIFT (12)
+#define S5PC100_CLKDIV3_FIMC0_MASK (0xf<<16)
+#define S5PC100_CLKDIV3_FIMC0_SHIFT (16)
+#define S5PC100_CLKDIV3_FIMC1_MASK (0xf<<20)
+#define S5PC100_CLKDIV3_FIMC1_SHIFT (20)
+#define S5PC100_CLKDIV3_FIMC2_MASK (0xf<<24)
+#define S5PC100_CLKDIV3_FIMC2_SHIFT (24)
+#define S5PC100_CLKDIV3_HDMI_MASK (0xf<<28)
+#define S5PC100_CLKDIV3_HDMI_SHIFT (28)
+
+/* CLKDIV4 */
+#define S5PC100_CLKDIV4_PWI_MASK (0x7<<0)
+#define S5PC100_CLKDIV4_PWI_SHIFT (0)
+#define S5PC100_CLKDIV4_HCLKD2_MASK (0x7<<4)
+#define S5PC100_CLKDIV4_HCLKD2_SHIFT (4)
+#define S5PC100_CLKDIV4_I2SD2_MASK (0xf<<8)
+#define S5PC100_CLKDIV4_I2SD2_SHIFT (8)
+#define S5PC100_CLKDIV4_AUDIO0_MASK (0xf<<12)
+#define S5PC100_CLKDIV4_AUDIO0_SHIFT (12)
+#define S5PC100_CLKDIV4_AUDIO1_MASK (0xf<<16)
+#define S5PC100_CLKDIV4_AUDIO1_SHIFT (16)
+#define S5PC100_CLKDIV4_AUDIO2_MASK (0xf<<20)
+#define S5PC100_CLKDIV4_AUDIO2_SHIFT (20)
+
+
+/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D00_INTC (1<<0)
+#define S5PC100_CLKGATE_D00_TZIC (1<<1)
+#define S5PC100_CLKGATE_D00_CFCON (1<<2)
+#define S5PC100_CLKGATE_D00_MDMA (1<<3)
+#define S5PC100_CLKGATE_D00_G2D (1<<4)
+#define S5PC100_CLKGATE_D00_SECSS (1<<5)
+#define S5PC100_CLKGATE_D00_CSSYS (1<<6)
+
+/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D01_DMC (1<<0)
+#define S5PC100_CLKGATE_D01_SROMC (1<<1)
+#define S5PC100_CLKGATE_D01_ONENAND (1<<2)
+#define S5PC100_CLKGATE_D01_NFCON (1<<3)
+#define S5PC100_CLKGATE_D01_INTMEM (1<<4)
+#define S5PC100_CLKGATE_D01_EBI (1<<5)
+
+/* PCLKD0 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D02_SECKEY (1<<1)
+#define S5PC100_CLKGATE_D02_SDM (1<<2)
+
+/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D10_PDMA0 (1<<0)
+#define S5PC100_CLKGATE_D10_PDMA1 (1<<1)
+#define S5PC100_CLKGATE_D10_USBHOST (1<<2)
+#define S5PC100_CLKGATE_D10_USBOTG (1<<3)
+#define S5PC100_CLKGATE_D10_MODEMIF (1<<4)
+#define S5PC100_CLKGATE_D10_HSMMC0 (1<<5)
+#define S5PC100_CLKGATE_D10_HSMMC1 (1<<6)
+#define S5PC100_CLKGATE_D10_HSMMC2 (1<<7)
+
+/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D11_LCD (1<<0)
+#define S5PC100_CLKGATE_D11_ROTATOR (1<<1)
+#define S5PC100_CLKGATE_D11_FIMC0 (1<<2)
+#define S5PC100_CLKGATE_D11_FIMC1 (1<<3)
+#define S5PC100_CLKGATE_D11_FIMC2 (1<<4)
+#define S5PC100_CLKGATE_D11_JPEG (1<<5)
+#define S5PC100_CLKGATE_D11_DSI (1<<6)
+#define S5PC100_CLKGATE_D11_CSI (1<<7)
+#define S5PC100_CLKGATE_D11_G3D (1<<8)
+
+/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D12_TV (1<<0)
+#define S5PC100_CLKGATE_D12_VP (1<<1)
+#define S5PC100_CLKGATE_D12_MIXER (1<<2)
+#define S5PC100_CLKGATE_D12_HDMI (1<<3)
+#define S5PC100_CLKGATE_D12_MFC (1<<4)
+
+/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
+#define S5PC100_CLKGATE_D13_CHIPID (1<<0)
+#define S5PC100_CLKGATE_D13_GPIO (1<<1)
+#define S5PC100_CLKGATE_D13_APC (1<<2)
+#define S5PC100_CLKGATE_D13_IEC (1<<3)
+#define S5PC100_CLKGATE_D13_PWM (1<<6)
+#define S5PC100_CLKGATE_D13_SYSTIMER (1<<7)
+#define S5PC100_CLKGATE_D13_WDT (1<<8)
+#define S5PC100_CLKGATE_D13_RTC (1<<9)
+
+/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
+#define S5PC100_CLKGATE_D14_UART0 (1<<0)
+#define S5PC100_CLKGATE_D14_UART1 (1<<1)
+#define S5PC100_CLKGATE_D14_UART2 (1<<2)
+#define S5PC100_CLKGATE_D14_UART3 (1<<3)
+#define S5PC100_CLKGATE_D14_IIC (1<<4)
+#define S5PC100_CLKGATE_D14_HDMI_IIC (1<<5)
+#define S5PC100_CLKGATE_D14_SPI0 (1<<6)
+#define S5PC100_CLKGATE_D14_SPI1 (1<<7)
+#define S5PC100_CLKGATE_D14_SPI2 (1<<8)
+#define S5PC100_CLKGATE_D14_IRDA (1<<9)
+#define S5PC100_CLKGATE_D14_CCAN0 (1<<10)
+#define S5PC100_CLKGATE_D14_CCAN1 (1<<11)
+#define S5PC100_CLKGATE_D14_HSITX (1<<12)
+#define S5PC100_CLKGATE_D14_HSIRX (1<<13)
+
+/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
+#define S5PC100_CLKGATE_D15_IIS0 (1<<0)
+#define S5PC100_CLKGATE_D15_IIS1 (1<<1)
+#define S5PC100_CLKGATE_D15_IIS2 (1<<2)
+#define S5PC100_CLKGATE_D15_AC97 (1<<3)
+#define S5PC100_CLKGATE_D15_PCM0 (1<<4)
+#define S5PC100_CLKGATE_D15_PCM1 (1<<5)
+#define S5PC100_CLKGATE_D15_SPDIF (1<<6)
+#define S5PC100_CLKGATE_D15_TSADC (1<<7)
+#define S5PC100_CLKGATE_D15_KEYIF (1<<8)
+#define S5PC100_CLKGATE_D15_CG (1<<9)
+
+/* HCLKD2 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D20_HCLKD2 (1<<0)
+#define S5PC100_CLKGATE_D20_I2SD2 (1<<1)
+
+/* Special Clock Gate 0 Registers */
+#define S5PC1XX_CLKGATE_SCLK0_HPM (1<<0)
+#define S5PC1XX_CLKGATE_SCLK0_PWI (1<<1)
+#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2)
+#define S5PC100_CLKGATE_SCLK0_UART (1<<3)
+#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4)
+#define S5PC100_CLKGATE_SCLK0_SPI1 (1<<5)
+#define S5PC100_CLKGATE_SCLK0_SPI2 (1<<6)
+#define S5PC100_CLKGATE_SCLK0_SPI0_48 (1<<7)
+#define S5PC100_CLKGATE_SCLK0_SPI1_48 (1<<8)
+#define S5PC100_CLKGATE_SCLK0_SPI2_48 (1<<9)
+#define S5PC100_CLKGATE_SCLK0_IRDA (1<<10)
+#define S5PC100_CLKGATE_SCLK0_USBHOST (1<<11)
+#define S5PC100_CLKGATE_SCLK0_MMC0 (1<<12)
+#define S5PC100_CLKGATE_SCLK0_MMC1 (1<<13)
+#define S5PC100_CLKGATE_SCLK0_MMC2 (1<<14)
+#define S5PC100_CLKGATE_SCLK0_MMC0_48 (1<<15)
+#define S5PC100_CLKGATE_SCLK0_MMC1_48 (1<<16)
+#define S5PC100_CLKGATE_SCLK0_MMC2_48 (1<<17)
+
+/* Special Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_SCLK1_LCD (1<<0)
+#define S5PC100_CLKGATE_SCLK1_FIMC0 (1<<1)
+#define S5PC100_CLKGATE_SCLK1_FIMC1 (1<<2)
+#define S5PC100_CLKGATE_SCLK1_FIMC2 (1<<3)
+#define S5PC100_CLKGATE_SCLK1_TV54 (1<<4)
+#define S5PC100_CLKGATE_SCLK1_VDAC54 (1<<5)
+#define S5PC100_CLKGATE_SCLK1_MIXER (1<<6)
+#define S5PC100_CLKGATE_SCLK1_HDMI (1<<7)
+#define S5PC100_CLKGATE_SCLK1_AUDIO0 (1<<8)
+#define S5PC100_CLKGATE_SCLK1_AUDIO1 (1<<9)
+#define S5PC100_CLKGATE_SCLK1_AUDIO2 (1<<10)
+#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11)
+#define S5PC100_CLKGATE_SCLK1_CAM (1<<12)
+
+/* register for power management */
+#define S5PC100_PWR_CFG S5PC1XX_CLKREG(0x8000)
+#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_CLKREG(0x8004)
+#define S5PC100_NORMAL_CFG S5PC1XX_CLKREG(0x8010)
+#define S5PC100_STOP_CFG S5PC1XX_CLKREG(0x8014)
+#define S5PC100_SLEEP_CFG S5PC1XX_CLKREG(0x8018)
+#define S5PC100_STOP_MEM_CFG S5PC1XX_CLKREG(0x801C)
+#define S5PC100_OSC_FREQ S5PC1XX_CLKREG(0x8100)
+#define S5PC100_OSC_STABLE S5PC1XX_CLKREG(0x8104)
+#define S5PC100_PWR_STABLE S5PC1XX_CLKREG(0x8108)
+#define S5PC100_MTC_STABLE S5PC1XX_CLKREG(0x8110)
+#define S5PC100_CLAMP_STABLE S5PC1XX_CLKREG(0x8114)
+#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200)
+#define S5PC100_RST_STAT S5PC1XX_CLKREG(0x8300)
+#define S5PC100_WAKEUP_STAT S5PC1XX_CLKREG(0x8304)
+#define S5PC100_BLK_PWR_STAT S5PC1XX_CLKREG(0x8308)
+#define S5PC100_INFORM0 S5PC1XX_CLKREG(0x8400)
+#define S5PC100_INFORM1 S5PC1XX_CLKREG(0x8404)
+#define S5PC100_INFORM2 S5PC1XX_CLKREG(0x8408)
+#define S5PC100_INFORM3 S5PC1XX_CLKREG(0x840C)
+#define S5PC100_INFORM4 S5PC1XX_CLKREG(0x8410)
+#define S5PC100_INFORM5 S5PC1XX_CLKREG(0x8414)
+#define S5PC100_INFORM6 S5PC1XX_CLKREG(0x8418)
+#define S5PC100_INFORM7 S5PC1XX_CLKREG(0x841C)
+#define S5PC100_DCGIDX_MAP0 S5PC1XX_CLKREG(0x8500)
+#define S5PC100_DCGIDX_MAP1 S5PC1XX_CLKREG(0x8504)
+#define S5PC100_DCGIDX_MAP2 S5PC1XX_CLKREG(0x8508)
+#define S5PC100_DCGPERF_MAP0 S5PC1XX_CLKREG(0x850C)
+#define S5PC100_DCGPERF_MAP1 S5PC1XX_CLKREG(0x8510)
+#define S5PC100_DVCIDX_MAP S5PC1XX_CLKREG(0x8514)
+#define S5PC100_FREQ_CPU S5PC1XX_CLKREG(0x8518)
+#define S5PC100_FREQ_DPM S5PC1XX_CLKREG(0x851C)
+#define S5PC100_DVSEMCLK_EN S5PC1XX_CLKREG(0x8520)
+#define S5PC100_APLL_CON_L8 S5PC1XX_CLKREG(0x8600)
+#define S5PC100_APLL_CON_L7 S5PC1XX_CLKREG(0x8604)
+#define S5PC100_APLL_CON_L6 S5PC1XX_CLKREG(0x8608)
+#define S5PC100_APLL_CON_L5 S5PC1XX_CLKREG(0x860C)
+#define S5PC100_APLL_CON_L4 S5PC1XX_CLKREG(0x8610)
+#define S5PC100_APLL_CON_L3 S5PC1XX_CLKREG(0x8614)
+#define S5PC100_APLL_CON_L2 S5PC1XX_CLKREG(0x8618)
+#define S5PC100_APLL_CON_L1 S5PC1XX_CLKREG(0x861C)
+#define S5PC100_IEM_CONTROL S5PC1XX_CLKREG(0x8620)
+#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_CLKREG(0x8700)
+#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_CLKREG(0x8704)
+#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_CLKREG(0x8708)
+#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_CLKREG(0x870C)
+#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_CLKREG(0x8710)
+#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_CLKREG(0x8714)
+#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_CLKREG(0x8718)
+#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_CLKREG(0x871C)
+#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_CLKREG(0x8724)
+
+#define S5PC100_SWRESET S5PC1XX_CLKREG(0x100000)
+#define S5PC100_OND_SWRESET S5PC1XX_CLKREG(0x100008)
+#define S5PC100_GEN_CTRL S5PC1XX_CLKREG(0x100100)
+#define S5PC100_GEN_STATUS S5PC1XX_CLKREG(0x100104)
+#define S5PC100_MEM_SYS_CFG S5PC1XX_CLKREG(0x100200)
+#define S5PC100_CAM_MUX_SEL S5PC1XX_CLKREG(0x100300)
+#define S5PC100_MIXER_OUT_SEL S5PC1XX_CLKREG(0x100304)
+#define S5PC100_LPMP_MODE_SEL S5PC1XX_CLKREG(0x100308)
+#define S5PC100_MIPI_PHY_CON0 S5PC1XX_CLKREG(0x100400)
+#define S5PC100_MIPI_PHY_CON1 S5PC1XX_CLKREG(0x100414)
+#define S5PC100_HDMI_PHY_CON0 S5PC1XX_CLKREG(0x100420)
+
+#define S5PC100_CFG_WFI_CLEAN (~(3<<5))
+#define S5PC100_CFG_WFI_IDLE (1<<5)
+#define S5PC100_CFG_WFI_STOP (2<<5)
+#define S5PC100_CFG_WFI_SLEEP (3<<5)
+
+#define S5PC100_OTHER_SYS_INT 24
+#define S5PC100_OTHER_STA_TYPE 23
+#define STA_TYPE_EXPON 0
+#define STA_TYPE_SFR 1
+
+#define S5PC100_PWR_STA_EXP_SCALE 0
+#define S5PC100_PWR_STA_CNT 4
+
+#define S5PC100_PWR_STABLE_COUNT 85500
+
+#define S5PC100_SLEEP_CFG_OSC_EN 0
+
+/* OTHERS Resgister */
+#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
+#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28)
+
+/* MIPI D-PHY Control Register 0 */
+#define S5PC100_MIPI_PHY_CON0_M_RESETN (1 << 1)
+#define S5PC100_MIPI_PHY_CON0_S_RESETN (1 << 0)
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
new file mode 100644
index 00000000000..45e27513166
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -0,0 +1,65 @@
+/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * Based on plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+extern int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern int s5pc100_register_baseclocks(unsigned long xtal);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+extern struct sysdev_class s5pc100_sysclass;
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
+extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
+extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
+extern struct clk clk_hpll;
+extern struct clk clk_hd0;
+extern struct clk clk_pd0;
+extern struct clk clk_54m;
+extern struct clk clk_dout_mpll2;
+extern void s5pc1xx_register_clocks(void);
+extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
+extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
+extern struct platform_device s3c_device_g2d;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_vpp;
+extern struct platform_device s3c_device_tvenc;
+extern struct platform_device s3c_device_tvscaler;
+extern struct platform_device s3c_device_rotator;
+extern struct platform_device s3c_device_jpeg;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_usb_otghcd;
+extern struct platform_device s3c_device_keypad;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_smc911x;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_mfc;
+extern struct platform_device s3c_device_ac97;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_fimc2;
+
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
new file mode 100644
index 00000000000..80d6dd942cb
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -0,0 +1,259 @@
+/* arch/arm/plat-s5pc1xx/irq.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Interrupt handling
+ *
+ * Based on plat-s3c64xx/irq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+
+/* Timer interrupt handling */
+
+static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
+{
+ generic_handle_irq(sub_irq);
+}
+
+static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER0);
+}
+
+static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER1);
+}
+
+static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER2);
+}
+
+static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER3);
+}
+
+static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER4);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f; /* mask out pending interrupts */
+ reg &= ~(1 << (irq - IRQ_TIMER0));
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f; /* mask out pending interrupts */
+ reg |= 1 << (irq - IRQ_TIMER0);
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f;
+ reg |= (1 << 5) << (irq - IRQ_TIMER0);
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+ .name = "s3c-timer",
+ .mask = s3c_irq_timer_mask,
+ .unmask = s3c_irq_timer_unmask,
+ .ack = s3c_irq_timer_ack,
+};
+
+struct uart_irq {
+ void __iomem *regs;
+ unsigned int base_irq;
+ unsigned int parent_irq;
+};
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct uart_irq uart_irqs[] = {
+ [0] = {
+ .regs = (void *)S3C_VA_UART0,
+ .base_irq = IRQ_S3CUART_BASE0,
+ .parent_irq = IRQ_UART0,
+ },
+ [1] = {
+ .regs = (void *)S3C_VA_UART1,
+ .base_irq = IRQ_S3CUART_BASE1,
+ .parent_irq = IRQ_UART1,
+ },
+ [2] = {
+ .regs = (void *)S3C_VA_UART2,
+ .base_irq = IRQ_S3CUART_BASE2,
+ .parent_irq = IRQ_UART2,
+ },
+ [3] = {
+ .regs = (void *)S3C_VA_UART3,
+ .base_irq = IRQ_S3CUART_BASE3,
+ .parent_irq = IRQ_UART3,
+ },
+};
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+ struct uart_irq *uirq = get_irq_chip_data(irq);
+ return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+ return irq & 3;
+}
+
+/* UART interrupt registers, not worth adding to seperate include header */
+#define S3C64XX_UINTP 0x30
+#define S3C64XX_UINTSP 0x34
+#define S3C64XX_UINTM 0x38
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg |= (1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg |= (1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+ __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg &= ~(1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+
+ __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+ struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
+ u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+ int base = uirq->base_irq;
+
+ if (pend & (1 << 0))
+ generic_handle_irq(base);
+ if (pend & (1 << 1))
+ generic_handle_irq(base + 1);
+ if (pend & (1 << 2))
+ generic_handle_irq(base + 2);
+ if (pend & (1 << 3))
+ generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+ .name = "s3c-uart",
+ .mask = s3c_irq_uart_mask,
+ .unmask = s3c_irq_uart_unmask,
+ .mask_ack = s3c_irq_uart_maskack,
+ .ack = s3c_irq_uart_ack,
+};
+
+static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
+{
+ void __iomem *reg_base = uirq->regs;
+ unsigned int irq;
+ int offs;
+
+ /* mask all interrupts at the start. */
+ __raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+ for (offs = 0; offs < 3; offs++) {
+ irq = uirq->base_irq + offs;
+
+ set_irq_chip(irq, &s3c_irq_uart);
+ set_irq_chip_data(irq, uirq);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
+{
+ int i;
+ int uart, irq;
+
+ printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+ /* initialise the pair of VICs */
+ for (i = 0; i < num; i++)
+ vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
+ vic_valid[i], 0);
+
+ /* add the timer sub-irqs */
+
+ set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
+ set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
+ set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
+ set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
+ set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
+
+ for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
+ set_irq_chip(irq, &s3c_irq_timer);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
+ s5pc1xx_uart_irq(&uart_irqs[uart]);
+}
+
+
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
new file mode 100644
index 00000000000..6b24035172f
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -0,0 +1,1139 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+ *
+ * Copyright 2009 Samsung Electronics, Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 based common clock support
+ *
+ * Based on plat-s3c64xx/s3c6400-clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+ .name = "ext_xtal",
+ .id = -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+#define clk_fout_mpll clk_mpll
+
+struct clk_sources {
+ unsigned int nr_sources;
+ struct clk **sources;
+};
+
+struct clksrc_clk {
+ struct clk clk;
+ unsigned int mask;
+ unsigned int shift;
+
+ struct clk_sources *sources;
+
+ unsigned int divider_shift;
+ void __iomem *reg_divider;
+ void __iomem *reg_source;
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 1;
+}
+
+struct clk clk_27m = {
+ .name = "clk_27m",
+ .id = -1,
+ .rate = 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+ unsigned long flags;
+ u32 val;
+
+ /* can't rely on clock lock, this register has other usages */
+ local_irq_save(flags);
+
+ val = __raw_readl(S5PC1XX_CLK_SRC1);
+ if (enable)
+ val |= S5PC100_CLKSRC1_CLK48M_MASK;
+ else
+ val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+ __raw_writel(val, S5PC1XX_CLK_SRC1);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+struct clk clk_48m = {
+ .name = "clk_48m",
+ .id = -1,
+ .rate = 48000000,
+ .enable = clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+ .name = "clk_54m",
+ .id = -1,
+ .rate = 54000000,
+};
+
+struct clk clk_hpll = {
+ .name = "hpll",
+ .id = -1,
+};
+
+struct clk clk_hd0 = {
+ .name = "hclkd0",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+};
+
+struct clk clk_pd0 = {
+ .name = "pclkd0",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg,
+ struct clk *clk,
+ int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ u32 con;
+
+ con = __raw_readl(reg);
+
+ if (enable)
+ con |= ctrlbit;
+ else
+ con &= ~ctrlbit;
+
+ __raw_writel(con, reg);
+ return 0;
+}
+
+static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "dsi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_DSI,
+ }, {
+ .name = "csi",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_CSI,
+ }, {
+ .name = "ccan0",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
+ }, {
+ .name = "ccan1",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
+ }, {
+ .name = "keypad",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
+ }, {
+ .name = "hclkd2",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_clk_d20_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
+ }, {
+ .name = "iis-d2",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_clk_d20_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
+ }, {
+ .name = "otg",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
+ },
+};
+
+static struct clk init_clocks[] = {
+ /* System1 (D0_0) devices */
+ {
+ .name = "intc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_INTC,
+ }, {
+ .name = "tzic",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_TZIC,
+ }, {
+ .name = "cf-ata",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_CFCON,
+ }, {
+ .name = "mdma",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_MDMA,
+ }, {
+ .name = "g2d",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_G2D,
+ }, {
+ .name = "secss",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_SECSS,
+ }, {
+ .name = "cssys",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
+ },
+
+ /* Memory (D0_1) devices */
+ {
+ .name = "dmc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_DMC,
+ }, {
+ .name = "sromc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_SROMC,
+ }, {
+ .name = "onenand",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
+ }, {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_NFCON,
+ }, {
+ .name = "intmem",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
+ }, {
+ .name = "ebi",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_EBI,
+ },
+
+ /* System2 (D0_2) devices */
+ {
+ .name = "seckey",
+ .id = -1,
+ .parent = &clk_pd0,
+ .enable = s5pc1xx_clk_d02_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
+ }, {
+ .name = "sdm",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d02_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D02_SDM,
+ },
+
+ /* File (D1_0) devices */
+ {
+ .name = "pdma0",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
+ }, {
+ .name = "pdma1",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
+ }, {
+ .name = "modem",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
+ },
+
+ /* Multimedia1 (D1_1) devices */
+ {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_LCD,
+ }, {
+ .name = "rotator",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
+ }, {
+ .name = "fimc",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
+ }, {
+ .name = "fimc",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
+ }, {
+ .name = "fimc",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
+ }, {
+ .name = "jpeg",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_JPEG,
+ }, {
+ .name = "g3d",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_G3D,
+ },
+
+ /* Multimedia2 (D1_2) devices */
+ {
+ .name = "tv",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_TV,
+ }, {
+ .name = "vp",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_VP,
+ }, {
+ .name = "mixer",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_MIXER,
+ }, {
+ .name = "hdmi",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_HDMI,
+ }, {
+ .name = "mfc",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_MFC,
+ },
+
+ /* System (D1_3) devices */
+ {
+ .name = "chipid",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_GPIO,
+ }, {
+ .name = "apc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_APC,
+ }, {
+ .name = "iec",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_IEC,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_PWM,
+ }, {
+ .name = "systimer",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_WDT,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_RTC,
+ },
+
+ /* Connectivity (D1_4) devices */
+ {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART2,
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART3,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_IIC,
+ }, {
+ .name = "hdmi-i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI0,
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI1,
+ }, {
+ .name = "spi",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI2,
+ }, {
+ .name = "irda",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_IRDA,
+ }, {
+ .name = "hsitx",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HSITX,
+ }, {
+ .name = "hsirx",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
+ },
+
+ /* Audio (D1_5) devices */
+ {
+ .name = "iis",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS0,
+ }, {
+ .name = "iis",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS1,
+ }, {
+ .name = "iis",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS2,
+ }, {
+ .name = "ac97",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_AC97,
+ }, {
+ .name = "pcm",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_PCM0,
+ }, {
+ .name = "pcm",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_PCM1,
+ }, {
+ .name = "spdif",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_TSADC,
+ }, {
+ .name = "keyif",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
+ }, {
+ .name = "cg",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_CG,
+ },
+
+ /* Audio (D2_0) devices: all disabled */
+
+ /* Special Clocks 1 */
+ {
+ .name = "sclk_hpm",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC1XX_CLKGATE_SCLK0_HPM,
+ }, {
+ .name = "sclk_onenand",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
+ }, {
+ .name = "sclk_spi_48",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
+ }, {
+ .name = "sclk_spi_48",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
+ }, {
+ .name = "sclk_spi_48",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
+ }, {
+ .name = "sclk_mmc_48",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
+ }, {
+ .name = "sclk_mmc_48",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
+ }, {
+ .name = "sclk_mmc_48",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
+ },
+
+ /* Special Clocks 2 */
+ {
+ .name = "sclk_tv_54",
+ .id = -1,
+ .parent = &clk_54m,
+ .enable = s5pc1xx_sclk1_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_TV54,
+ }, {
+ .name = "sclk_vdac_54",
+ .id = -1,
+ .parent = &clk_54m,
+ .enable = s5pc1xx_sclk1_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_VDAC54,
+ }, {
+ .name = "sclk_spdif",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_sclk1_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_SPDIF,
+ },
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ clkp = init_clocks;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+}
+static struct clk clk_fout_apll = {
+ .name = "fout_apll",
+ .id = -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+ [0] = &clk_fin_apll,
+ [1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+ .sources = clk_src_apll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .shift = S5PC1XX_CLKSRC0_APLL_SHIFT,
+ .mask = S5PC1XX_CLKSRC0_APLL_MASK,
+ .sources = &clk_src_apll,
+ .reg_source = S5PC1XX_CLK_SRC0,
+};
+
+static struct clk clk_fout_epll = {
+ .name = "fout_epll",
+ .id = -1,
+};
+
+static struct clk *clk_src_epll_list[] = {
+ [0] = &clk_fin_epll,
+ [1] = &clk_fout_epll,
+};
+
+static struct clk_sources clk_src_epll = {
+ .sources = clk_src_epll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .shift = S5PC1XX_CLKSRC0_EPLL_SHIFT,
+ .mask = S5PC1XX_CLKSRC0_EPLL_MASK,
+ .sources = &clk_src_epll,
+ .reg_source = S5PC1XX_CLK_SRC0,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+ .sources = clk_src_mpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .shift = S5PC1XX_CLKSRC0_MPLL_SHIFT,
+ .mask = S5PC1XX_CLKSRC0_MPLL_MASK,
+ .sources = &clk_src_mpll,
+ .reg_source = S5PC1XX_CLK_SRC0,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned long clkdiv;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+ rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
+
+ return rate;
+}
+
+static struct clk clk_dout_mpll = {
+ .name = "dout_mpll",
+ .id = -1,
+ .parent = &clk_mout_mpll.clk,
+ .get_rate = s5pc1xx_clk_doutmpll_get_rate,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned long clkdiv;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+ rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
+
+ return rate;
+}
+
+struct clk clk_dout_mpll2 = {
+ .name = "dout_mpll2",
+ .id = -1,
+ .parent = &clk_mout_mpll.clk,
+ .get_rate = s5pc1xx_clk_doutmpll2_get_rate,
+};
+
+static struct clk *clkset_uart_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ NULL,
+ NULL
+};
+
+static struct clk_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+ return container_of(clk, struct clksrc_clk, clk);
+}
+
+static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ unsigned long rate = clk_get_rate(clk->parent);
+ u32 clkdiv = __raw_readl(sclk->reg_divider);
+
+ clkdiv >>= sclk->divider_shift;
+ clkdiv &= 0xf;
+ clkdiv++;
+
+ rate /= clkdiv;
+ return rate;
+}
+
+static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ void __iomem *reg = sclk->reg_divider;
+ unsigned int div;
+ u32 val;
+
+ rate = clk_round_rate(clk, rate);
+ div = clk_get_rate(clk->parent) / rate;
+ if (div > 16)
+ return -EINVAL;
+
+ val = __raw_readl(reg);
+ val &= ~(0xf << sclk->shift);
+ val |= (div - 1) << sclk->shift;
+ __raw_writel(val, reg);
+
+ return 0;
+}
+
+static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ struct clk_sources *srcs = sclk->sources;
+ u32 clksrc = __raw_readl(sclk->reg_source);
+ int src_nr = -1;
+ int ptr;
+
+ for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+ if (srcs->sources[ptr] == parent) {
+ src_nr = ptr;
+ break;
+ }
+
+ if (src_nr >= 0) {
+ clksrc &= ~sclk->mask;
+ clksrc |= src_nr << sclk->shift;
+
+ __raw_writel(clksrc, sclk->reg_source);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ rate = parent_rate;
+ else {
+ div = rate / parent_rate;
+
+ if (div == 0)
+ div = 1;
+ if (div > 16)
+ div = 16;
+
+ rate = parent_rate / div;
+ }
+
+ return rate;
+}
+
+static struct clksrc_clk clk_uart_uclk1 = {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .set_parent = s5pc1xx_setparent_clksrc,
+ .get_rate = s5pc1xx_getrate_clksrc,
+ .set_rate = s5pc1xx_setrate_clksrc,
+ .round_rate = s5pc1xx_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC1_UART_SHIFT,
+ .mask = S5PC100_CLKSRC1_UART_MASK,
+ .sources = &clkset_uart,
+ .divider_shift = S5PC100_CLKDIV2_UART_SHIFT,
+ .reg_divider = S5PC1XX_CLK_DIV2,
+ .reg_source = S5PC1XX_CLK_SRC1,
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+ &clk_uart_uclk1,
+};
+
+static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+{
+ struct clk_sources *srcs = clk->sources;
+ u32 clksrc = __raw_readl(clk->reg_source);
+
+ clksrc &= clk->mask;
+ clksrc >>= clk->shift;
+
+ if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+ printk(KERN_ERR "%s: bad source %d\n",
+ clk->clk.name, clksrc);
+ return;
+ }
+
+ clk->clk.parent = srcs->sources[clksrc];
+
+ printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+ clk->clk.name, clk->clk.parent->name, clksrc,
+ clk_get_rate(&clk->clk));
+}
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long hclkd0;
+ unsigned long hclk;
+ unsigned long pclkd0;
+ unsigned long pclk;
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long hpll;
+ unsigned long epll;
+ unsigned int ptr;
+ u32 clkdiv0, clkdiv1;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
+ clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+
+ printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+ __func__, clkdiv0, clkdiv1);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
+ mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
+ epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+ hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
+
+ printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
+ apll, mpll, epll, hpll);
+
+ armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+ armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
+ hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
+ pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
+ hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
+ pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
+
+ printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
+ armclk, hclkd0, pclkd0, hclk, pclk);
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_apll.rate = apll;
+
+ clk_h.rate = hclk;
+ clk_p.rate = pclk;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+ s5pc1xx_set_clksrc(init_parents[ptr]);
+}
+
+static struct clk *clks[] __initdata = {
+ &clk_ext_xtal_mux,
+ &clk_mout_epll.clk,
+ &clk_fout_epll,
+ &clk_mout_mpll.clk,
+ &clk_dout_mpll,
+ &clk_uart_uclk1.clk,
+ &clk_ext,
+ &clk_epll,
+ &clk_27m,
+ &clk_48m,
+ &clk_54m,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+ clkp = clks[ptr];
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ clk_mpll.parent = &clk_mout_mpll.clk;
+ clk_epll.parent = &clk_mout_epll.clk;
+}
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/plat-s5pc1xx/s5pc100-init.c
new file mode 100644
index 00000000000..c58710884ce
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-init.c
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ /* The driver name is s3c6400-uart to reuse s3c6400_serial_drv */
+ s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
new file mode 100644
index 00000000000..3d00c025fff
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Pin configuration would be needed */
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
new file mode 100644
index 00000000000..c8f3ca42f51
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ /* Pin configuration would be needed */
+}
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 33026eff2aa..c8c55b46934 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sat Jun 20 22:28:39 2009
+# Last update: Sat Sep 12 12:00:16 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -1769,7 +1769,7 @@ mx31cicada MACH_MX31CICADA MX31CICADA 1777
mi424wr MACH_MI424WR MI424WR 1778
axs_ultrax MACH_AXS_ULTRAX AXS_ULTRAX 1779
at572d940deb MACH_AT572D940DEB AT572D940DEB 1780
-davinci_da8xx_evm MACH_DAVINCI_DA8XX_EVM DAVINCI_DA8XX_EVM 1781
+davinci_da830_evm MACH_DAVINCI_DA830_EVM DAVINCI_DA830_EVM 1781
ep9302 MACH_EP9302 EP9302 1782
at572d940hfek MACH_AT572D940HFEB AT572D940HFEB 1783
cybook3 MACH_CYBOOK3 CYBOOK3 1784
@@ -1962,7 +1962,7 @@ ethernut5 MACH_ETHERNUT5 ETHERNUT5 1971
arm11 MACH_ARM11 ARM11 1972
cpuat9260 MACH_CPUAT9260 CPUAT9260 1973
cpupxa255 MACH_CPUPXA255 CPUPXA255 1974
-cpuimx27 MACH_CPUIMX27 CPUIMX27 1975
+eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975
cheflux MACH_CHEFLUX CHEFLUX 1976
eb_cpux9k2 MACH_EB_CPUX9K2 EB_CPUX9K2 1977
opcotec MACH_OPCOTEC OPCOTEC 1978
@@ -2249,14 +2249,14 @@ omap3_phrazer MACH_OMAP3_PHRAZER OMAP3_PHRAZER 2261
darwin MACH_DARWIN DARWIN 2262
oratiscomu MACH_ORATISCOMU ORATISCOMU 2263
rtsbc20 MACH_RTSBC20 RTSBC20 2264
-i780 MACH_I780 I780 2265
+sgh_i780 MACH_I780 I780 2265
gemini324 MACH_GEMINI324 GEMINI324 2266
oratislan MACH_ORATISLAN ORATISLAN 2267
oratisalog MACH_ORATISALOG ORATISALOG 2268
oratismadi MACH_ORATISMADI ORATISMADI 2269
oratisot16 MACH_ORATISOT16 ORATISOT16 2270
oratisdesk MACH_ORATISDESK ORATISDESK 2271
-v2p_ca9 MACH_V2P_CA9 V2P_CA9 2272
+v2_ca9 MACH_V2P_CA9 V2P_CA9 2272
sintexo MACH_SINTEXO SINTEXO 2273
cm3389 MACH_CM3389 CM3389 2274
omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275
@@ -2280,3 +2280,132 @@ htcrhodium MACH_HTCRHODIUM HTCRHODIUM 2292
htctopaz MACH_HTCTOPAZ HTCTOPAZ 2293
matrix504 MACH_MATRIX504 MATRIX504 2294
mrfsa MACH_MRFSA MRFSA 2295
+sc_p270 MACH_SC_P270 SC_P270 2296
+atlas5_evb MACH_ATLAS5_EVB ATLAS5_EVB 2297
+pelco_lobox MACH_PELCO_LOBOX PELCO_LOBOX 2298
+dilax_pcu200 MACH_DILAX_PCU200 DILAX_PCU200 2299
+leonardo MACH_LEONARDO LEONARDO 2300
+zoran_approach7 MACH_ZORAN_APPROACH7 ZORAN_APPROACH7 2301
+dp6xx MACH_DP6XX DP6XX 2302
+bcm2153_vesper MACH_BCM2153_VESPER BCM2153_VESPER 2303
+mahimahi MACH_MAHIMAHI MAHIMAHI 2304
+clickc MACH_CLICKC CLICKC 2305
+zb_gateway MACH_ZB_GATEWAY ZB_GATEWAY 2306
+tazcard MACH_TAZCARD TAZCARD 2307
+tazdev MACH_TAZDEV TAZDEV 2308
+annax_cb_arm MACH_ANNAX_CB_ARM ANNAX_CB_ARM 2309
+annax_dm3 MACH_ANNAX_DM3 ANNAX_DM3 2310
+cerebric MACH_CEREBRIC CEREBRIC 2311
+orca MACH_ORCA ORCA 2312
+pc9260 MACH_PC9260 PC9260 2313
+ems285a MACH_EMS285A EMS285A 2314
+gec2410 MACH_GEC2410 GEC2410 2315
+gec2440 MACH_GEC2440 GEC2440 2316
+mw903 MACH_ARCH_MW903 ARCH_MW903 2317
+mw2440 MACH_MW2440 MW2440 2318
+ecac2378 MACH_ECAC2378 ECAC2378 2319
+tazkiosk MACH_TAZKIOSK TAZKIOSK 2320
+whiterabbit_mch MACH_WHITERABBIT_MCH WHITERABBIT_MCH 2321
+sbox9263 MACH_SBOX9263 SBOX9263 2322
+oreo MACH_OREO OREO 2323
+smdk6442 MACH_SMDK6442 SMDK6442 2324
+openrd_base MACH_OPENRD_BASE OPENRD_BASE 2325
+incredible MACH_INCREDIBLE INCREDIBLE 2326
+incrediblec MACH_INCREDIBLEC INCREDIBLEC 2327
+heroct MACH_HEROCT HEROCT 2328
+mmnet1000 MACH_MMNET1000 MMNET1000 2329
+devkit8000 MACH_DEVKIT8000 DEVKIT8000 2330
+devkit9000 MACH_DEVKIT9000 DEVKIT9000 2331
+mx31txtr MACH_MX31TXTR MX31TXTR 2332
+u380 MACH_U380 U380 2333
+oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334
+npcmx50 MACH_NPCMX50 NPCMX50 2335
+mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336
+mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337
+riom MACH_RIOM RIOM 2338
+comcas MACH_COMCAS COMCAS 2339
+wsi_mx27 MACH_WSI_MX27 WSI_MX27 2340
+cm_t35 MACH_CM_T35 CM_T35 2341
+net2big MACH_NET2BIG NET2BIG 2342
+motorola_a1600 MACH_MOTOROLA_A1600 MOTOROLA_A1600 2343
+igep0020 MACH_IGEP0020 IGEP0020 2344
+igep0010 MACH_IGEP0010 IGEP0010 2345
+mv6281gtwge2 MACH_MV6281GTWGE2 MV6281GTWGE2 2346
+scat100 MACH_SCAT100 SCAT100 2347
+sanmina MACH_SANMINA SANMINA 2348
+momento MACH_MOMENTO MOMENTO 2349
+nuc9xx MACH_NUC9XX NUC9XX 2350
+nuc910evb MACH_NUC910EVB NUC910EVB 2351
+nuc920evb MACH_NUC920EVB NUC920EVB 2352
+nuc950evb MACH_NUC950EVB NUC950EVB 2353
+nuc945evb MACH_NUC945EVB NUC945EVB 2354
+nuc960evb MACH_NUC960EVB NUC960EVB 2355
+nuc932evb MACH_NUC932EVB NUC932EVB 2356
+nuc900 MACH_NUC900 NUC900 2357
+sd1soc MACH_SD1SOC SD1SOC 2358
+ln2440bc MACH_LN2440BC LN2440BC 2359
+rsbc MACH_RSBC RSBC 2360
+openrd_client MACH_OPENRD_CLIENT OPENRD_CLIENT 2361
+hpipaq11x MACH_HPIPAQ11X HPIPAQ11X 2362
+wayland MACH_WAYLAND WAYLAND 2363
+acnbsx102 MACH_ACNBSX102 ACNBSX102 2364
+hwat91 MACH_HWAT91 HWAT91 2365
+at91sam9263cs MACH_AT91SAM9263CS AT91SAM9263CS 2366
+csb732 MACH_CSB732 CSB732 2367
+u8500 MACH_U8500 U8500 2368
+huqiu MACH_HUQIU HUQIU 2369
+mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370
+pmt1g MACH_PMT1G PMT1G 2371
+htcelf MACH_HTCELF HTCELF 2372
+armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373
+armadillo440 MACH_ARMADILLO440 ARMADILLO440 2374
+u_chip_dual_arm MACH_U_CHIP_DUAL_ARM U_CHIP_DUAL_ARM 2375
+csr_bdb3 MACH_CSR_BDB3 CSR_BDB3 2376
+dolby_cat1018 MACH_DOLBY_CAT1018 DOLBY_CAT1018 2377
+hy9307 MACH_HY9307 HY9307 2378
+aspire_easystore MACH_A_ES A_ES 2379
+davinci_irif MACH_DAVINCI_IRIF DAVINCI_IRIF 2380
+agama9263 MACH_AGAMA9263 AGAMA9263 2381
+marvell_jasper MACH_MARVELL_JASPER MARVELL_JASPER 2382
+flint MACH_FLINT FLINT 2383
+tavorevb3 MACH_TAVOREVB3 TAVOREVB3 2384
+sch_m490 MACH_SCH_M490 SCH_M490 2386
+rbl01 MACH_RBL01 RBL01 2387
+omnifi MACH_OMNIFI OMNIFI 2388
+otavalo MACH_OTAVALO OTAVALO 2389
+sienna MACH_SIENNA SIENNA 2390
+htc_excalibur_s620 MACH_HTC_EXCALIBUR_S620 HTC_EXCALIBUR_S620 2391
+htc_opal MACH_HTC_OPAL HTC_OPAL 2392
+touchbook MACH_TOUCHBOOK TOUCHBOOK 2393
+latte MACH_LATTE LATTE 2394
+xa200 MACH_XA200 XA200 2395
+nimrod MACH_NIMROD NIMROD 2396
+cc9p9215_3g MACH_CC9P9215_3G CC9P9215_3G 2397
+cc9p9215_3gjs MACH_CC9P9215_3GJS CC9P9215_3GJS 2398
+tk71 MACH_TK71 TK71 2399
+comham3525 MACH_COMHAM3525 COMHAM3525 2400
+mx31erebus MACH_MX31EREBUS MX31EREBUS 2401
+mcardmx27 MACH_MCARDMX27 MCARDMX27 2402
+paradise MACH_PARADISE PARADISE 2403
+tide MACH_TIDE TIDE 2404
+wzl2440 MACH_WZL2440 WZL2440 2405
+sdrdemo MACH_SDRDEMO SDRDEMO 2406
+ethercan2 MACH_ETHERCAN2 ETHERCAN2 2407
+ecmimg20 MACH_ECMIMG20 ECMIMG20 2408
+omap_dragon MACH_OMAP_DRAGON OMAP_DRAGON 2409
+halo MACH_HALO HALO 2410
+huangshan MACH_HUANGSHAN HUANGSHAN 2411
+vl_ma2sc MACH_VL_MA2SC VL_MA2SC 2412
+raumfeld_rc MACH_RAUMFELD_RC RAUMFELD_RC 2413
+raumfeld_connector MACH_RAUMFELD_CONNECTOR RAUMFELD_CONNECTOR 2414
+raumfeld_speaker MACH_RAUMFELD_SPEAKER RAUMFELD_SPEAKER 2415
+multibus_master MACH_MULTIBUS_MASTER MULTIBUS_MASTER 2416
+multibus_pbk MACH_MULTIBUS_PBK MULTIBUS_PBK 2417
+tnetv107x MACH_TNETV107X TNETV107X 2418
+snake MACH_SNAKE SNAKE 2419
+cwmx27 MACH_CWMX27 CWMX27 2420
+sch_m480 MACH_SCH_M480 SCH_M480 2421
+platypus MACH_PLATYPUS PLATYPUS 2422
+pss2 MACH_PSS2 PSS2 2423
+davinci_apm150 MACH_DAVINCI_APM150 DAVINCI_APM150 2424
+str9100 MACH_STR9100 STR9100 2425
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index a2bed62aec2..4fa9903b83c 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -42,6 +42,7 @@ ENTRY(vfp_null_entry)
mov pc, lr
ENDPROC(vfp_null_entry)
+ .align 2
.LCvfp:
.word vfp_vector
@@ -61,6 +62,7 @@ ENTRY(vfp_testing_entry)
mov pc, r9 @ we have handled the fault
ENDPROC(vfp_testing_entry)
+ .align 2
VFP_arch_address:
.word VFP_arch
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 1aeae38725d..66dc2d03b7f 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -209,40 +209,55 @@ ENDPROC(vfp_save_state)
last_VFP_context_address:
.word last_VFP_context
-ENTRY(vfp_get_float)
- add pc, pc, r0, lsl #3
+ .macro tbl_branch, base, tmp, shift
+#ifdef CONFIG_THUMB2_KERNEL
+ adr \tmp, 1f
+ add \tmp, \tmp, \base, lsl \shift
+ mov pc, \tmp
+#else
+ add pc, pc, \base, lsl \shift
mov r0, r0
+#endif
+1:
+ .endm
+
+ENTRY(vfp_get_float)
+ tbl_branch r0, r3, #3
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0
+1: mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0
mov pc, lr
- mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1
+ .org 1b + 8
+1: mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1
mov pc, lr
+ .org 1b + 8
.endr
ENDPROC(vfp_get_float)
ENTRY(vfp_put_float)
- add pc, pc, r1, lsl #3
- mov r0, r0
+ tbl_branch r1, r3, #3
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0
+1: mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0
mov pc, lr
- mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1
+ .org 1b + 8
+1: mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1
mov pc, lr
+ .org 1b + 8
.endr
ENDPROC(vfp_put_float)
ENTRY(vfp_get_double)
- add pc, pc, r0, lsl #3
- mov r0, r0
+ tbl_branch r0, r3, #3
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- fmrrd r0, r1, d\dr
+1: fmrrd r0, r1, d\dr
mov pc, lr
+ .org 1b + 8
.endr
#ifdef CONFIG_VFPv3
@ d16 - d31 registers
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
+1: mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
mov pc, lr
+ .org 1b + 8
.endr
#endif
@@ -253,17 +268,18 @@ ENTRY(vfp_get_double)
ENDPROC(vfp_get_double)
ENTRY(vfp_put_double)
- add pc, pc, r2, lsl #3
- mov r0, r0
+ tbl_branch r2, r3, #3
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- fmdrr d\dr, r0, r1
+1: fmdrr d\dr, r0, r1
mov pc, lr
+ .org 1b + 8
.endr
#ifdef CONFIG_VFPv3
@ d16 - d31 registers
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
+1: mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
mov pc, lr
+ .org 1b + 8
.endr
#endif
ENDPROC(vfp_put_double)