Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Update mach-types
  [ARM] orion5x: D-link DNS-323 rev. B1 power-off
  [ARM] Orion5x: add GPIO LED and buttons for wrt350n v2
  [ARM] pxa: fix irq suspend/resume for pxa25x
  [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x
  [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus
  [ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot
  [ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two

8 files changed, 192 insertions, 13 deletions

diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 8bf4153d084..3bf6304158f 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/orion_spi.h>
@@ -53,6 +54,11 @@ static void __init rd88f6192_init(void)
 	 */
 	kirkwood_init();
 
+	orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+	if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+	    gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+		pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&rd88f6192_ge00_data);
 	kirkwood_sata_init(&rd88f6192_sata_data);
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index b31ca4cef36..8f159db4d08 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
@@ -32,6 +33,7 @@
 
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
+#define DNS323_GPIO_SYSTEM_UP		3
 #define DNS323_GPIO_LED_POWER		5
 #define DNS323_GPIO_OVERTEMP		6
 #define DNS323_GPIO_RTC			7
@@ -239,7 +241,7 @@ static struct gpio_led dns323_leds[] = {
 	{
 		.name = "power:blue",
 		.gpio = DNS323_GPIO_LED_POWER,
-		.active_low = 1,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -334,7 +336,7 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
 	{  0, MPP_UNUSED },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
-	{  3, MPP_UNUSED },
+	{  3, MPP_GPIO },		/* system up flag */
 	{  4, MPP_GPIO },		/* power button LED */
 	{  5, MPP_GPIO },		/* power button LED */
 	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
@@ -372,13 +374,23 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = {
 	},
 };
 
-/* DNS-323 specific power off method */
-static void dns323_power_off(void)
+/* DNS-323 rev. A specific power off method */
+static void dns323a_power_off(void)
 {
 	pr_info("%s: triggering power-off...\n", __func__);
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 }
 
+/* DNS-323 rev B specific power off method */
+static void dns323b_power_off(void)
+{
+	pr_info("%s: triggering power-off...\n", __func__);
+	/* Pin has to be changed to 1 and back to 0 to do actual power off. */
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+	mdelay(100);
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
+}
+
 static void __init dns323_init(void)
 {
 	/* Setup basic Orion functions. Need to be called early. */
@@ -424,11 +436,20 @@ static void __init dns323_init(void)
 	if (dns323_dev_id() == MV88F5182_DEV_ID)
 		orion5x_sata_init(&dns323_sata_data);
 
-	/* register dns323 specific power-off method */
+	/* The 5182 has flag to indicate the system is up. Without this flag
+	 * set, power LED will flash and cannot be controlled via leds-gpio.
+	 */
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
+
+	/* Register dns323 specific power-off method */
 	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 		pr_err("DNS323: failed to setup power-off GPIO\n");
-	pm_power_off = dns323_power_off;
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		pm_power_off = dns323b_power_off;
+	else
+		pm_power_off = dns323a_power_off;
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 1b4ad9d5e2e..cb0feca193d 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -15,6 +15,9 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
@@ -24,6 +27,80 @@
 #include "common.h"
 #include "mpp.h"
 
+/*
+ * LEDs attached to GPIO
+ */
+static struct gpio_led wrt350n_v2_led_pins[] = {
+	{
+		.name		= "wrt350nv2:green:power",
+		.gpio		= 0,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:security",
+		.gpio		= 1,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:orange:power",
+		.gpio		= 5,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:usb",
+		.gpio		= 6,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:wireless",
+		.gpio		= 7,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led_platform_data wrt350n_v2_led_data = {
+	.leds		= wrt350n_v2_led_pins,
+	.num_leds	= ARRAY_SIZE(wrt350n_v2_led_pins),
+};
+
+static struct platform_device wrt350n_v2_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &wrt350n_v2_led_data,
+	},
+};
+
+/*
+ * Buttons attached to GPIO
+ */
+static struct gpio_keys_button wrt350n_v2_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 3,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_WLAN,
+		.gpio		= 2,
+		.desc		= "WPS Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
+	.buttons	= wrt350n_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(wrt350n_v2_buttons),
+};
+
+static struct platform_device wrt350n_v2_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &wrt350n_v2_button_data,
+	},
+};
+
+/*
+ * General setup
+ */
 static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
 	{  0, MPP_GPIO },		/* Power LED green (0=on) */
 	{  1, MPP_GPIO },		/* Security LED (0=on) */
@@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void)
 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
 				   WRT350N_V2_NOR_BOOT_SIZE);
 	platform_device_register(&wrt350n_v2_nor_flash);
+	platform_device_register(&wrt350n_v2_leds);
+	platform_device_register(&wrt350n_v2_button_device);
 }
 
 static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 74446cf8ae6..da3156d8690 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -457,6 +457,7 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = {
  * USB Device Controller
  */
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	.gpio_vbus		= -1,
 	/* no connect GPIO; corgi can't tell connection status */
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index b13dc0269a6..9c787855cf2 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -169,7 +169,6 @@
 #define GPIO86_nSDCS2		MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
 #define GPIO87_nSDCS3		MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
 #define GPIO88_RDnWR		MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-#define GPIO89_nACRESET		MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
 
 /* USB */
 #define GPIO9_USB_RCV		MFP_CFG_IN(GPIO9, AF1)
@@ -186,6 +185,9 @@
 #define GPIO30_ASSP_TXD		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
 #define GPIO31_ASSP_SFRM_IN	MFP_CFG_IN(GPIO31, AF1)
 #define GPIO31_ASSP_SFRM_OUT	MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#endif
+
+/* AC97 */
+#define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+#endif	/* CONFIG_CPU_PXA26x */
 
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 6112af431fa..1beb40f692f 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -164,8 +164,11 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 		saved_icmr[i] = _ICMR(irq);
 		_ICMR(irq) = 0;
 	}
-	for (i = 0; i < pxa_internal_irq_nr; i++)
-		saved_ipr[i] = IPR(i);
+
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < pxa_internal_irq_nr; i++)
+			saved_ipr[i] = IPR(i);
+	}
 
 	return 0;
 }
@@ -174,12 +177,15 @@ static int pxa_irq_resume(struct sys_device *dev)
 {
 	int i, irq = PXA_IRQ(0);
 
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < pxa_internal_irq_nr; i++)
+			IPR(i) = saved_ipr[i];
+	}
+
 	for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
 		_ICMR(irq) = saved_icmr[i];
 		_ICLR(irq) = 0;
 	}
-	for (i = 0; i < pxa_internal_irq_nr; i++)
-		IPR(i) = saved_ipr[i];
 
 	ICCR = 1;
 	return 0;
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index d41d41d78ad..54c84a492a0 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -133,6 +133,12 @@ static void __init orion_pcie_setup_wins(void __iomem *base,
 	}
 
 	/*
+	 * Round up 'size' to the nearest power of two.
+	 */
+	if ((size & (size - 1)) != 0)
+		size = 1 << fls(size);
+
+	/*
 	 * Setup BAR[1] to all DRAM banks.
 	 */
 	writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1));
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index c3a74ce24ef..5a79fc6ee81 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Wed Dec 16 20:06:34 2009
+# Last update: Thu Jan 28 22:15:54 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2536,6 +2536,7 @@ davinci_dm6467tevm	MACH_DAVINCI_DM6467TEVM	DAVINCI_DM6467TEVM	2548
 c3ax03			MACH_C3AX03		C3AX03			2549
 mxt_td60		MACH_MXT_TD60		MXT_TD60		2550
 esyx			MACH_ESYX		ESYX			2551
+dove_db2		MACH_DOVE_DB2		DOVE_DB2		2552
 bulldog			MACH_BULLDOG		BULLDOG			2553
 derell_me2000		MACH_DERELL_ME2000	DERELL_ME2000		2554
 bcmring_base		MACH_BCMRING_BASE	BCMRING_BASE		2555
@@ -2555,6 +2556,7 @@ iseo			MACH_ISEO		ISEO			2568
 cezanne			MACH_CEZANNE		CEZANNE			2569
 lucca			MACH_LUCCA		LUCCA			2570
 supersmart		MACH_SUPERSMART		SUPERSMART		2571
+arm11_board		MACH_CS_MISANO		CS_MISANO		2572
 magnolia2		MACH_MAGNOLIA2		MAGNOLIA2		2573
 emxx			MACH_EMXX		EMXX			2574
 outlaw			MACH_OUTLAW		OUTLAW			2575
@@ -2578,3 +2580,59 @@ glacier			MACH_GLACIER		GLACIER			2592
 phrazer_bulldog		MACH_PHRAZER_BULLDOG	PHRAZER_BULLDOG		2593
 omap3_bulldog		MACH_OMAP3_BULLDOG	OMAP3_BULLDOG		2594
 pca101			MACH_PCA101		PCA101			2595
+buzzc			MACH_BUZZC		BUZZC			2596
+sasie2			MACH_SASIE2		SASIE2			2597
+davinci_cio		MACH_DAVINCI_CIO	DAVINCI_CIO		2598
+smartmeter_dl		MACH_SMARTMETER_DL	SMARTMETER_DL		2599
+wzl6410			MACH_WZL6410		WZL6410			2600
+wzl6410m		MACH_WZL6410M		WZL6410M		2601
+wzl6410f		MACH_WZL6410F		WZL6410F		2602
+wzl6410i		MACH_WZL6410I		WZL6410I		2603
+spacecom1		MACH_SPACECOM1		SPACECOM1		2604
+pingu920		MACH_PINGU920		PINGU920		2605
+bravoc			MACH_BRAVOC		BRAVOC			2606
+cybo2440		MACH_CYBO2440		CYBO2440		2607
+vdssw			MACH_VDSSW		VDSSW			2608
+romulus			MACH_ROMULUS		ROMULUS			2609
+omap_magic		MACH_OMAP_MAGIC		OMAP_MAGIC		2610
+eltd100			MACH_ELTD100		ELTD100			2611
+capc7117		MACH_CAPC7117		CAPC7117		2612
+swan			MACH_SWAN		SWAN			2613
+veu			MACH_VEU		VEU			2614
+rm2			MACH_RM2		RM2			2615
+tt2100			MACH_TT2100		TT2100			2616
+venice			MACH_VENICE		VENICE			2617
+pc7323			MACH_PC7323		PC7323			2618
+masp			MACH_MASP		MASP			2619
+fujitsu_tvstbsoc0	MACH_FUJITSU_TVSTBSOC	FUJITSU_TVSTBSOC	2620
+fujitsu_tvstbsoc1	MACH_FUJITSU_TVSTBSOC1	FUJITSU_TVSTBSOC1	2621
+lexikon			MACH_LEXIKON		LEXIKON			2622
+mini2440v2		MACH_MINI2440V2		MINI2440V2		2623
+icontrol		MACH_ICONTROL		ICONTROL		2624
+sheevad			MACH_SHEEVAD		SHEEVAD			2625
+qsd8x50a_st1_1		MACH_QSD8X50A_ST1_1	QSD8X50A_ST1_1		2626
+qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
+bee			MACH_BEE		BEE			2628
+mx23evk			MACH_MX23EVK		MX23EVK			2629
+ap4evb			MACH_AP4EVB		AP4EVB			2630
+stockholm		MACH_STOCKHOLM		STOCKHOLM		2631
+lpc_h3131		MACH_LPC_H3131		LPC_H3131		2632
+stingray		MACH_STINGRAY		STINGRAY		2633
+kraken			MACH_KRAKEN		KRAKEN			2634
+gw2388			MACH_GW2388		GW2388			2635
+jadecpu			MACH_JADECPU		JADECPU			2636
+carlisle		MACH_CARLISLE		CARLISLE		2637
+lux_sf9			MACH_LUX_SFT9		LUX_SFT9		2638
+nemid_tb		MACH_NEMID_TB		NEMID_TB		2639
+terrier			MACH_TERRIER		TERRIER			2640
+turbot			MACH_TURBOT		TURBOT			2641
+sanddab			MACH_SANDDAB		SANDDAB			2642
+mx35_cicada		MACH_MX35_CICADA	MX35_CICADA		2643
+ghi2703d		MACH_GHI2703D		GHI2703D		2644
+lux_sfx9		MACH_LUX_SFX9		LUX_SFX9		2645
+lux_sf9g		MACH_LUX_SF9G		LUX_SF9G		2646
+lux_edk9		MACH_LUX_EDK9		LUX_EDK9		2647
+hw90240			MACH_HW90240		HW90240			2648
+dm365_leopard		MACH_DM365_LEOPARD	DM365_LEOPARD		2649
+mityomapl138		MACH_MITYOMAPL138	MITYOMAPL138		2650
+scat110			MACH_SCAT110		SCAT110			2651