aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorKumar Gala <galak@kernel.crashing.org>2007-06-27 11:07:51 -0500
committerKumar Gala <galak@kernel.crashing.org>2007-06-29 01:58:43 -0500
commit58083dade53cd434e134cd26ae5e89061f6de1ff (patch)
tree4a70ca228ccab50c3036a37c7d1cd4e1a2825d76 /arch
parent0b1d40c4d4dd8f276d8d9730204b3a0a17ab0d61 (diff)
[POWERPC] Move common PCI code out of pci_32/pci_64
Moved the low hanging fruit that was either identical or close to it between ppc32 & ppc64 for PCI into pci-common.c Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch')
-rw-r--r--arch/powerpc/kernel/pci-common.c314
-rw-r--r--arch/powerpc/kernel/pci_32.c294
-rw-r--r--arch/powerpc/kernel/pci_64.c309
3 files changed, 314 insertions, 603 deletions
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 3ca8cfb99dc..b518b880d2e 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -51,3 +51,317 @@ int pci_domain_nr(struct pci_bus *bus)
}
EXPORT_SYMBOL(pci_domain_nr);
+
+#ifdef CONFIG_PPC_OF
+static ssize_t pci_show_devspec(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct pci_dev *pdev;
+ struct device_node *np;
+
+ pdev = to_pci_dev (dev);
+ np = pci_device_to_OF_node(pdev);
+ if (np == NULL || np->full_name == NULL)
+ return 0;
+ return sprintf(buf, "%s", np->full_name);
+}
+static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
+#endif /* CONFIG_PPC_OF */
+
+/* Add sysfs properties */
+void pcibios_add_platform_entries(struct pci_dev *pdev)
+{
+#ifdef CONFIG_PPC_OF
+ device_create_file(&pdev->dev, &dev_attr_devspec);
+#endif /* CONFIG_PPC_OF */
+}
+
+char __init *pcibios_setup(char *str)
+{
+ return str;
+}
+
+/*
+ * Reads the interrupt pin to determine if interrupt is use by card.
+ * If the interrupt is used, then gets the interrupt line from the
+ * openfirmware and sets it in the pci_dev and pci_config line.
+ */
+int pci_read_irq_line(struct pci_dev *pci_dev)
+{
+ struct of_irq oirq;
+ unsigned int virq;
+
+ DBG("Try to map irq for %s...\n", pci_name(pci_dev));
+
+#ifdef DEBUG
+ memset(&oirq, 0xff, sizeof(oirq));
+#endif
+ /* Try to get a mapping from the device-tree */
+ if (of_irq_map_pci(pci_dev, &oirq)) {
+ u8 line, pin;
+
+ /* If that fails, lets fallback to what is in the config
+ * space and map that through the default controller. We
+ * also set the type to level low since that's what PCI
+ * interrupts are. If your platform does differently, then
+ * either provide a proper interrupt tree or don't use this
+ * function.
+ */
+ if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
+ return -1;
+ if (pin == 0)
+ return -1;
+ if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
+ line == 0xff) {
+ return -1;
+ }
+ DBG(" -> no map ! Using irq line %d from PCI config\n", line);
+
+ virq = irq_create_mapping(NULL, line);
+ if (virq != NO_IRQ)
+ set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+ } else {
+ DBG(" -> got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
+ oirq.size, oirq.specifier[0], oirq.specifier[1],
+ oirq.controller->full_name);
+
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+ }
+ if(virq == NO_IRQ) {
+ DBG(" -> failed to map !\n");
+ return -1;
+ }
+
+ DBG(" -> mapped to linux irq %d\n", virq);
+
+ pci_dev->irq = virq;
+
+ return 0;
+}
+EXPORT_SYMBOL(pci_read_irq_line);
+
+/*
+ * Platform support for /proc/bus/pci/X/Y mmap()s,
+ * modelled on the sparc64 implementation by Dave Miller.
+ * -- paulus.
+ */
+
+/*
+ * Adjust vm_pgoff of VMA such that it is the physical page offset
+ * corresponding to the 32-bit pci bus offset for DEV requested by the user.
+ *
+ * Basically, the user finds the base address for his device which he wishes
+ * to mmap. They read the 32-bit value from the config space base register,
+ * add whatever PAGE_SIZE multiple offset they wish, and feed this into the
+ * offset parameter of mmap on /proc/bus/pci/XXX for that device.
+ *
+ * Returns negative error code on failure, zero on success.
+ */
+static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
+ resource_size_t *offset,
+ enum pci_mmap_state mmap_state)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ unsigned long io_offset = 0;
+ int i, res_bit;
+
+ if (hose == 0)
+ return NULL; /* should never happen */
+
+ /* If memory, add on the PCI bridge address offset */
+ if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
+ *offset += hose->pci_mem_offset;
+#endif
+ res_bit = IORESOURCE_MEM;
+ } else {
+ io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+ *offset += io_offset;
+ res_bit = IORESOURCE_IO;
+ }
+
+ /*
+ * Check that the offset requested corresponds to one of the
+ * resources of the device.
+ */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ struct resource *rp = &dev->resource[i];
+ int flags = rp->flags;
+
+ /* treat ROM as memory (should be already) */
+ if (i == PCI_ROM_RESOURCE)
+ flags |= IORESOURCE_MEM;
+
+ /* Active and same type? */
+ if ((flags & res_bit) == 0)
+ continue;
+
+ /* In the range of this resource? */
+ if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
+ continue;
+
+ /* found it! construct the final physical address */
+ if (mmap_state == pci_mmap_io)
+ *offset += hose->io_base_phys - io_offset;
+ return rp;
+ }
+
+ return NULL;
+}
+
+/*
+ * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
+ * device mapping.
+ */
+static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
+ pgprot_t protection,
+ enum pci_mmap_state mmap_state,
+ int write_combine)
+{
+ unsigned long prot = pgprot_val(protection);
+
+ /* Write combine is always 0 on non-memory space mappings. On
+ * memory space, if the user didn't pass 1, we check for a
+ * "prefetchable" resource. This is a bit hackish, but we use
+ * this to workaround the inability of /sysfs to provide a write
+ * combine bit
+ */
+ if (mmap_state != pci_mmap_mem)
+ write_combine = 0;
+ else if (write_combine == 0) {
+ if (rp->flags & IORESOURCE_PREFETCH)
+ write_combine = 1;
+ }
+
+ /* XXX would be nice to have a way to ask for write-through */
+ prot |= _PAGE_NO_CACHE;
+ if (write_combine)
+ prot &= ~_PAGE_GUARDED;
+ else
+ prot |= _PAGE_GUARDED;
+
+ return __pgprot(prot);
+}
+
+/*
+ * This one is used by /dev/mem and fbdev who have no clue about the
+ * PCI device, it tries to find the PCI device first and calls the
+ * above routine
+ */
+pgprot_t pci_phys_mem_access_prot(struct file *file,
+ unsigned long pfn,
+ unsigned long size,
+ pgprot_t protection)
+{
+ struct pci_dev *pdev = NULL;
+ struct resource *found = NULL;
+ unsigned long prot = pgprot_val(protection);
+ unsigned long offset = pfn << PAGE_SHIFT;
+ int i;
+
+ if (page_is_ram(pfn))
+ return __pgprot(prot);
+
+ prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
+
+ for_each_pci_dev(pdev) {
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ struct resource *rp = &pdev->resource[i];
+ int flags = rp->flags;
+
+ /* Active and same type? */
+ if ((flags & IORESOURCE_MEM) == 0)
+ continue;
+ /* In the range of this resource? */
+ if (offset < (rp->start & PAGE_MASK) ||
+ offset > rp->end)
+ continue;
+ found = rp;
+ break;
+ }
+ if (found)
+ break;
+ }
+ if (found) {
+ if (found->flags & IORESOURCE_PREFETCH)
+ prot &= ~_PAGE_GUARDED;
+ pci_dev_put(pdev);
+ }
+
+ DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
+
+ return __pgprot(prot);
+}
+
+
+/*
+ * Perform the actual remap of the pages for a PCI device mapping, as
+ * appropriate for this architecture. The region in the process to map
+ * is described by vm_start and vm_end members of VMA, the base physical
+ * address is found in vm_pgoff.
+ * The pci device structure is provided so that architectures may make mapping
+ * decisions on a per-device or per-bus basis.
+ *
+ * Returns a negative error code on failure, zero on success.
+ */
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
+ struct resource *rp;
+ int ret;
+
+ rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
+ if (rp == NULL)
+ return -EINVAL;
+
+ vma->vm_pgoff = offset >> PAGE_SHIFT;
+ vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
+ vma->vm_page_prot,
+ mmap_state, write_combine);
+
+ ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot);
+
+ return ret;
+}
+
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+ const struct resource *rsrc,
+ resource_size_t *start, resource_size_t *end)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ resource_size_t offset = 0;
+
+ if (hose == NULL)
+ return;
+
+ if (rsrc->flags & IORESOURCE_IO)
+ offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+
+ /* We pass a fully fixed up address to userland for MMIO instead of
+ * a BAR value because X is lame and expects to be able to use that
+ * to pass to /dev/mem !
+ *
+ * That means that we'll have potentially 64 bits values where some
+ * userland apps only expect 32 (like X itself since it thinks only
+ * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+ * 32 bits CHRPs :-(
+ *
+ * Hopefully, the sysfs insterface is immune to that gunk. Once X
+ * has been fixed (and the fix spread enough), we can re-enable the
+ * 2 lines below and pass down a BAR value to userland. In that case
+ * we'll also have to re-enable the matching code in
+ * __pci_mmap_make_offset().
+ *
+ * BenH.
+ */
+#if 0
+ else if (rsrc->flags & IORESOURCE_MEM)
+ offset = hose->pci_mem_offset;
+#endif
+
+ *start = rsrc->start - offset;
+ *end = rsrc->end - offset;
+}
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index c81ffa28297..3dd931ecce9 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -1028,34 +1028,12 @@ pci_create_OF_bus_map(void)
}
}
-static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct pci_dev *pdev;
- struct device_node *np;
-
- pdev = to_pci_dev (dev);
- np = pci_device_to_OF_node(pdev);
- if (np == NULL || np->full_name == NULL)
- return 0;
- return sprintf(buf, "%s", np->full_name);
-}
-static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-
#else /* CONFIG_PPC_OF */
void pcibios_make_OF_bus_map(void)
{
}
#endif /* CONFIG_PPC_OF */
-/* Add sysfs properties */
-void pcibios_add_platform_entries(struct pci_dev *pdev)
-{
-#ifdef CONFIG_PPC_OF
- device_create_file(&pdev->dev, &dev_attr_devspec);
-#endif /* CONFIG_PPC_OF */
-}
-
-
#ifdef CONFIG_PPC_PMAC
/*
* This set of routines checks for PCI<->PCI bridges that have closed
@@ -1390,11 +1368,6 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
}
}
-char __init *pcibios_setup(char *str)
-{
- return str;
-}
-
/* the next one is stolen from the alpha port... */
void __init
pcibios_update_irq(struct pci_dev *dev, int irq)
@@ -1403,64 +1376,6 @@ pcibios_update_irq(struct pci_dev *dev, int irq)
/* XXX FIXME - update OF device tree node interrupt property */
}
-#ifdef CONFIG_PPC_MERGE
-/* XXX This is a copy of the ppc64 version. This is temporary until we start
- * merging the 2 PCI layers
- */
-/*
- * Reads the interrupt pin to determine if interrupt is use by card.
- * If the interrupt is used, then gets the interrupt line from the
- * openfirmware and sets it in the pci_dev and pci_config line.
- */
-int pci_read_irq_line(struct pci_dev *pci_dev)
-{
- struct of_irq oirq;
- unsigned int virq;
-
- DBG("Try to map irq for %s...\n", pci_name(pci_dev));
-
- /* Try to get a mapping from the device-tree */
- if (of_irq_map_pci(pci_dev, &oirq)) {
- u8 line, pin;
-
- /* If that fails, lets fallback to what is in the config
- * space and map that through the default controller. We
- * also set the type to level low since that's what PCI
- * interrupts are. If your platform does differently, then
- * either provide a proper interrupt tree or don't use this
- * function.
- */
- if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
- return -1;
- if (pin == 0)
- return -1;
- if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
- line == 0xff) {
- return -1;
- }
- DBG(" -> no map ! Using irq line %d from PCI config\n", line);
-
- virq = irq_create_mapping(NULL, line);
- if (virq != NO_IRQ)
- set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
- } else {
- DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
- oirq.size, oirq.specifier[0], oirq.controller->full_name);
-
- virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
- oirq.size);
- }
- if(virq == NO_IRQ) {
- DBG(" -> failed to map !\n");
- return -1;
- }
- pci_dev->irq = virq;
-
- return 0;
-}
-EXPORT_SYMBOL(pci_read_irq_line);
-#endif /* CONFIG_PPC_MERGE */
-
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
u16 cmd, old_cmd;
@@ -1503,176 +1418,6 @@ pci_bus_to_hose(int bus)
return NULL;
}
-static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
- resource_size_t *offset,
- enum pci_mmap_state mmap_state)
-{
- struct pci_controller *hose = pci_bus_to_host(dev->bus);
- unsigned long io_offset = 0;
- int i, res_bit;
-
- if (hose == 0)
- return NULL; /* should never happen */
-
- /* If memory, add on the PCI bridge address offset */
- if (mmap_state == pci_mmap_mem) {
-#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
- *offset += hose->pci_mem_offset;
-#endif
- res_bit = IORESOURCE_MEM;
- } else {
- io_offset = hose->io_base_virt - (void __iomem *)_IO_BASE;
- *offset += io_offset;
- res_bit = IORESOURCE_IO;
- }
-
- /*
- * Check that the offset requested corresponds to one of the
- * resources of the device.
- */
- for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
- struct resource *rp = &dev->resource[i];
- int flags = rp->flags;
-
- /* treat ROM as memory (should be already) */
- if (i == PCI_ROM_RESOURCE)
- flags |= IORESOURCE_MEM;
-
- /* Active and same type? */
- if ((flags & res_bit) == 0)
- continue;
-
- /* In the range of this resource? */
- if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
- continue;
-
- /* found it! construct the final physical address */
- if (mmap_state == pci_mmap_io)
- *offset += hose->io_base_phys - io_offset;
- return rp;
- }
-
- return NULL;
-}
-
-/*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
- pgprot_t protection,
- enum pci_mmap_state mmap_state,
- int write_combine)
-{
- unsigned long prot = pgprot_val(protection);
-
- /* Write combine is always 0 on non-memory space mappings. On
- * memory space, if the user didn't pass 1, we check for a
- * "prefetchable" resource. This is a bit hackish, but we use
- * this to workaround the inability of /sysfs to provide a write
- * combine bit
- */
- if (mmap_state != pci_mmap_mem)
- write_combine = 0;
- else if (write_combine == 0) {
- if (rp->flags & IORESOURCE_PREFETCH)
- write_combine = 1;
- }
-
- /* XXX would be nice to have a way to ask for write-through */
- prot |= _PAGE_NO_CACHE;
- if (write_combine)
- prot &= ~_PAGE_GUARDED;
- else
- prot |= _PAGE_GUARDED;
-
- return __pgprot(prot);
-}
-
-/*
- * This one is used by /dev/mem and fbdev who have no clue about the
- * PCI device, it tries to find the PCI device first and calls the
- * above routine
- */
-pgprot_t pci_phys_mem_access_prot(struct file *file,
- unsigned long pfn,
- unsigned long size,
- pgprot_t protection)
-{
- struct pci_dev *pdev = NULL;
- struct resource *found = NULL;
- unsigned long prot = pgprot_val(protection);
- unsigned long offset = pfn << PAGE_SHIFT;
- int i;
-
- if (page_is_ram(pfn))
- return __pgprot(prot);
-
- prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
-
- for_each_pci_dev(pdev) {
- for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
- struct resource *rp = &pdev->resource[i];
- int flags = rp->flags;
-
- /* Active and same type? */
- if ((flags & IORESOURCE_MEM) == 0)
- continue;
- /* In the range of this resource? */
- if (offset < (rp->start & PAGE_MASK) ||
- offset > rp->end)
- continue;
- found = rp;
- break;
- }
- if (found)
- break;
- }
- if (found) {
- if (found->flags & IORESOURCE_PREFETCH)
- prot &= ~_PAGE_GUARDED;
- pci_dev_put(pdev);
- }
-
- DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
-
- return __pgprot(prot);
-}
-
-
-/*
- * Perform the actual remap of the pages for a PCI device mapping, as
- * appropriate for this architecture. The region in the process to map
- * is described by vm_start and vm_end members of VMA, the base physical
- * address is found in vm_pgoff.
- * The pci device structure is provided so that architectures may make mapping
- * decisions on a per-device or per-bus basis.
- *
- * Returns a negative error code on failure, zero on success.
- */
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state,
- int write_combine)
-{
- resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
- struct resource *rp;
- int ret;
-
- rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
- if (rp == NULL)
- return -EINVAL;
-
- vma->vm_pgoff = offset >> PAGE_SHIFT;
- vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
- vma->vm_page_prot,
- mmap_state, write_combine);
-
- ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start, vma->vm_page_prot);
-
- return ret;
-}
-
/* Provide information on locations of various I/O regions in physical
* memory. Do this on a per-card basis so that we choose the right
* root bridge.
@@ -1715,45 +1460,6 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
return result;
}
-void pci_resource_to_user(const struct pci_dev *dev, int bar,
- const struct resource *rsrc,
- resource_size_t *start, resource_size_t *end)
-{
- struct pci_controller *hose = pci_bus_to_host(dev->bus);
- resource_size_t offset = 0;
-
- if (hose == NULL)
- return;
-
- if (rsrc->flags & IORESOURCE_IO)
- offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
- /* We pass a fully fixed up address to userland for MMIO instead of
- * a BAR value because X is lame and expects to be able to use that
- * to pass to /dev/mem !
- *
- * That means that we'll have potentially 64 bits values where some
- * userland apps only expect 32 (like X itself since it thinks only
- * Sparc has 64 bits MMIO) but if we don't do that, we break it on
- * 32 bits CHRPs :-(
- *
- * Hopefully, the sysfs insterface is immune to that gunk. Once X
- * has been fixed (and the fix spread enough), we can re-enable the
- * 2 lines below and pass down a BAR value to userland. In that case
- * we'll also have to re-enable the matching code in
- * __pci_mmap_make_offset().
- *
- * BenH.
- */
-#if 0
- else if (rsrc->flags & IORESOURCE_MEM)
- offset = hose->pci_mem_offset;
-#endif
-
- *start = rsrc->start - offset;
- *end = rsrc->end - offset;
-}
-
unsigned long pci_address_to_pio(phys_addr_t address)
{
struct pci_controller* hose = hose_head;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 57bdcd88f04..384d2752fe6 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -601,11 +601,6 @@ static int __init pcibios_init(void)
subsys_initcall(pcibios_init);
-char __init *pcibios_setup(char *str)
-{
- return str;
-}
-
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
u16 cmd, oldcmd;
@@ -647,211 +642,6 @@ int pci_proc_domain(struct pci_bus *bus)
}
}
-/*
- * Platform support for /proc/bus/pci/X/Y mmap()s,
- * modelled on the sparc64 implementation by Dave Miller.
- * -- paulus.
- */
-
-/*
- * Adjust vm_pgoff of VMA such that it is the physical page offset
- * corresponding to the 32-bit pci bus offset for DEV requested by the user.
- *
- * Basically, the user finds the base address for his device which he wishes
- * to mmap. They read the 32-bit value from the config space base register,
- * add whatever PAGE_SIZE multiple offset they wish, and feed this into the
- * offset parameter of mmap on /proc/bus/pci/XXX for that device.
- *
- * Returns negative error code on failure, zero on success.
- */
-static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
- resource_size_t *offset,
- enum pci_mmap_state mmap_state)
-{
- struct pci_controller *hose = pci_bus_to_host(dev->bus);
- unsigned long io_offset = 0;
- int i, res_bit;
-
- if (hose == 0)
- return NULL; /* should never happen */
-
- /* If memory, add on the PCI bridge address offset */
- if (mmap_state == pci_mmap_mem) {
-#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
- *offset += hose->pci_mem_offset;
-#endif
- res_bit = IORESOURCE_MEM;
- } else {
- io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
- *offset += io_offset;
- res_bit = IORESOURCE_IO;
- }
-
- /*
- * Check that the offset requested corresponds to one of the
- * resources of the device.
- */
- for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
- struct resource *rp = &dev->resource[i];
- int flags = rp->flags;
-
- /* treat ROM as memory (should be already) */
- if (i == PCI_ROM_RESOURCE)
- flags |= IORESOURCE_MEM;
-
- /* Active and same type? */
- if ((flags & res_bit) == 0)
- continue;
-
- /* In the range of this resource? */
- if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
- continue;
-
- /* found it! construct the final physical address */
- if (mmap_state == pci_mmap_io)
- *offset += hose->io_base_phys - io_offset;
- return rp;
- }
-
- return NULL;
-}
-
-/*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
- pgprot_t protection,
- enum pci_mmap_state mmap_state,
- int write_combine)
-{
- unsigned long prot = pgprot_val(protection);
-
- /* Write combine is always 0 on non-memory space mappings. On
- * memory space, if the user didn't pass 1, we check for a
- * "prefetchable" resource. This is a bit hackish, but we use
- * this to workaround the inability of /sysfs to provide a write
- * combine bit
- */
- if (mmap_state != pci_mmap_mem)
- write_combine = 0;
- else if (write_combine == 0) {
- if (rp->flags & IORESOURCE_PREFETCH)
- write_combine = 1;
- }
-
- /* XXX would be nice to have a way to ask for write-through */
- prot |= _PAGE_NO_CACHE;
- if (write_combine)
- prot &= ~_PAGE_GUARDED;
- else
- prot |= _PAGE_GUARDED;
-
- return __pgprot(prot);
-}
-
-/*
- * This one is used by /dev/mem and fbdev who have no clue about the
- * PCI device, it tries to find the PCI device first and calls the
- * above routine
- */
-pgprot_t pci_phys_mem_access_prot(struct file *file,
- unsigned long pfn,
- unsigned long size,
- pgprot_t protection)
-{
- struct pci_dev *pdev = NULL;
- struct resource *found = NULL;
- unsigned long prot = pgprot_val(protection);
- unsigned long offset = pfn << PAGE_SHIFT;
- int i;
-
- if (page_is_ram(pfn))
- return __pgprot(prot);
-
- prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
-
- for_each_pci_dev(pdev) {
- for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
- struct resource *rp = &pdev->resource[i];
- int flags = rp->flags;
-
- /* Active and same type? */
- if ((flags & IORESOURCE_MEM) == 0)
- continue;
- /* In the range of this resource? */
- if (offset < (rp->start & PAGE_MASK) ||
- offset > rp->end)
- continue;
- found = rp;
- break;
- }
- if (found)
- break;
- }
- if (found) {
- if (found->flags & IORESOURCE_PREFETCH)
- prot &= ~_PAGE_GUARDED;
- pci_dev_put(pdev);
- }
-
- DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
-
- return __pgprot(prot);
-}
-
-
-/*
- * Perform the actual remap of the pages for a PCI device mapping, as
- * appropriate for this architecture. The region in the process to map
- * is described by vm_start and vm_end members of VMA, the base physical
- * address is found in vm_pgoff.
- * The pci device structure is provided so that architectures may make mapping
- * decisions on a per-device or per-bus basis.
- *
- * Returns a negative error code on failure, zero on success.
- */
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
- struct resource *rp;
- int ret;
-
- rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
- if (rp == NULL)
- return -EINVAL;
-
- vma->vm_pgoff = offset >> PAGE_SHIFT;
- vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
- vma->vm_page_prot,
- mmap_state, write_combine);
-
- ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start, vma->vm_page_prot);
-
- return ret;
-}
-
-static ssize_t pci_show_devspec(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct pci_dev *pdev;
- struct device_node *np;
-
- pdev = to_pci_dev (dev);
- np = pci_device_to_OF_node(pdev);
- if (np == NULL || np->full_name == NULL)
- return 0;
- return sprintf(buf, "%s", np->full_name);
-}
-static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-
-void pcibios_add_platform_entries(struct pci_dev *pdev)
-{
- device_create_file(&pdev->dev, &dev_attr_devspec);
-}
-
void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
struct device_node *dev, int prim)
{
@@ -1167,105 +957,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
}
EXPORT_SYMBOL(pcibios_fixup_bus);
-/*
- * Reads the interrupt pin to determine if interrupt is use by card.
- * If the interrupt is used, then gets the interrupt line from the
- * openfirmware and sets it in the pci_dev and pci_config line.
- */
-int pci_read_irq_line(struct pci_dev *pci_dev)
-{
- struct of_irq oirq;
- unsigned int virq;
-
- DBG("Try to map irq for %s...\n", pci_name(pci_dev));
-
-#ifdef DEBUG
- memset(&oirq, 0xff, sizeof(oirq));
-#endif
- /* Try to get a mapping from the device-tree */
- if (of_irq_map_pci(pci_dev, &oirq)) {
- u8 line, pin;
-
- /* If that fails, lets fallback to what is in the config
- * space and map that through the default controller. We
- * also set the type to level low since that's what PCI
- * interrupts are. If your platform does differently, then
- * either provide a proper interrupt tree or don't use this
- * function.
- */
- if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
- return -1;
- if (pin == 0)
- return -1;
- if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
- line == 0xff) {
- return -1;
- }
- DBG(" -> no map ! Using irq line %d from PCI config\n", line);
-
- virq = irq_create_mapping(NULL, line);
- if (virq != NO_IRQ)
- set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
- } else {
- DBG(" -> got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
- oirq.size, oirq.specifier[0], oirq.specifier[1],
- oirq.controller->full_name);
-
- virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
- oirq.size);
- }
- if(virq == NO_IRQ) {
- DBG(" -> failed to map !\n");
- return -1;
- }
-
- DBG(" -> mapped to linux irq %d\n", virq);
-
- pci_dev->irq = virq;
-
- return 0;
-}
-EXPORT_SYMBOL(pci_read_irq_line);
-
-void pci_resource_to_user(const struct pci_dev *dev, int bar,
- const struct resource *rsrc,
- resource_size_t *start, resource_size_t *end)
-{
- struct pci_controller *hose = pci_bus_to_host(dev->bus);
- resource_size_t offset = 0;
-
- if (hose == NULL)
- return;
-
- if (rsrc->flags & IORESOURCE_IO)
- offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
- /* We pass a fully fixed up address to userland for MMIO instead of
- * a BAR value because X is lame and expects to be able to use that
- * to pass to /dev/mem !
- *
- * That means that we'll have potentially 64 bits values where some
- * userland apps only expect 32 (like X itself since it thinks only
- * Sparc has 64 bits MMIO) but if we don't do that, we break it on
- * 32 bits CHRPs :-(
- *
- * Hopefully, the sysfs insterface is immune to that gunk. Once X
- * has been fixed (and the fix spread enough), we can re-enable the
- * 2 lines below and pass down a BAR value to userland. In that case
- * we'll also have to re-enable the matching code in
- * __pci_mmap_make_offset().
- *
- * BenH.
- */
-#if 0
- else if (rsrc->flags & IORESOURCE_MEM)
- offset = hose->pci_mem_offset;
-#endif
-
- *start = rsrc->start - offset;
- *end = rsrc->end - offset;
-}
-
struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
{
if (!have_of)