aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/pata_hpt37x.c
diff options
context:
space:
mode:
authorJeff Garzik <jeff@garzik.org>2006-08-31 00:03:49 -0400
committerJeff Garzik <jeff@garzik.org>2006-08-31 00:03:49 -0400
commit85cd7251b9112e3dabeac9fd3b175601ca607241 (patch)
treeb33b80f54883e224a586661165bd0aee2c47ed39 /drivers/ata/pata_hpt37x.c
parent481ff126e8d9be63809e7854badf815e54066eed (diff)
[libata #pata-drivers] Trim trailing whitespace.
Diffstat (limited to 'drivers/ata/pata_hpt37x.c')
-rw-r--r--drivers/ata/pata_hpt37x.c138
1 files changed, 69 insertions, 69 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 7c3da53f1e0..532a7928f80 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -134,7 +134,7 @@ static const struct hpt_clock hpt370a_timings_66[] = {
{ XFER_UDMA_0, 0x14a0e73f },
{ XFER_MW_DMA_2, 0x2480fa73 },
- { XFER_MW_DMA_1, 0x2480fa77 },
+ { XFER_MW_DMA_1, 0x2480fa77 },
{ XFER_MW_DMA_0, 0x2480fb3f },
{ XFER_PIO_4, 0x0c82be73 },
@@ -333,11 +333,11 @@ static const struct hpt_chip hpt374 = {
* Return the 32bit register programming information for this channel
* that matches the speed provided.
*/
-
+
static u32 hpt37x_find_mode(struct ata_port *ap, int speed)
{
struct hpt_clock *clocks = ap->host->private_data;
-
+
while(clocks->xfer_speed) {
if (clocks->xfer_speed == speed)
return clocks->timing;
@@ -367,7 +367,7 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons
while(list[i] != NULL) {
if (!strncmp(list[i], s, len)) {
- printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n",
+ printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n",
modestr, list[i]);
return 1;
}
@@ -413,7 +413,7 @@ static const char *bad_ata100_5[] = {
*
* Block UDMA on devices that cause trouble with this controller.
*/
-
+
static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
{
if (adev->class != ATA_DEV_ATA) {
@@ -432,7 +432,7 @@ static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device
*
* Block UDMA on devices that cause trouble with this controller.
*/
-
+
static unsigned long hpt370a_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
{
if (adev->class != ATA_DEV_ATA) {
@@ -441,36 +441,36 @@ static unsigned long hpt370a_filter(const struct ata_port *ap, struct ata_device
}
return ata_pci_default_filter(ap, adev, mask);
}
-
+
/**
* hpt37x_pre_reset - reset the hpt37x bus
* @ap: ATA port to reset
*
* Perform the initial reset handling for the 370/372 and 374 func 0
*/
-
+
static int hpt37x_pre_reset(struct ata_port *ap)
{
u8 scr2, ata66;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
+
pci_read_config_byte(pdev, 0x5B, &scr2);
pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
/* Cable register now active */
pci_read_config_byte(pdev, 0x5A, &ata66);
/* Restore state */
pci_write_config_byte(pdev, 0x5B, scr2);
-
+
if (ata66 & (1 << ap->port_no))
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA80;
/* Reset the state machine */
- pci_write_config_byte(pdev, 0x50, 0x37);
- pci_write_config_byte(pdev, 0x54, 0x37);
+ pci_write_config_byte(pdev, 0x50, 0x37);
+ pci_write_config_byte(pdev, 0x54, 0x37);
udelay(100);
-
+
return ata_std_prereset(ap);
}
@@ -480,7 +480,7 @@ static int hpt37x_pre_reset(struct ata_port *ap)
*
* Perform probe for HPT37x, except for HPT374 channel 2
*/
-
+
static void hpt37x_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
@@ -490,7 +490,7 @@ static int hpt374_pre_reset(struct ata_port *ap)
{
u16 mcr3, mcr6;
u8 ata66;
-
+
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
/* Do the extra channel work */
pci_read_config_word(pdev, 0x52, &mcr3);
@@ -504,17 +504,17 @@ static int hpt374_pre_reset(struct ata_port *ap)
/* Reset TCBLID/FCBLID to output */
pci_write_config_word(pdev, 0x52, mcr3);
pci_write_config_word(pdev, 0x56, mcr6);
-
+
if (ata66 & (1 << ap->port_no))
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA80;
/* Reset the state machine */
- pci_write_config_byte(pdev, 0x50, 0x37);
- pci_write_config_byte(pdev, 0x54, 0x37);
+ pci_write_config_byte(pdev, 0x50, 0x37);
+ pci_write_config_byte(pdev, 0x54, 0x37);
udelay(100);
-
+
return ata_std_prereset(ap);
}
@@ -526,11 +526,11 @@ static int hpt374_pre_reset(struct ata_port *ap)
* channels. The function 0 channels work like usual but function 1
* is special
*/
-
+
static void hpt374_error_handler(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
+
if (!(PCI_FUNC(pdev->devfn) & 1))
hpt37x_error_handler(ap);
else
@@ -542,9 +542,9 @@ static void hpt374_error_handler(struct ata_port *ap)
* @ap: ATA interface
* @adev: device on the interface
*
- * Perform PIO mode setup.
+ * Perform PIO mode setup.
*/
-
+
static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -555,13 +555,13 @@ static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev)
addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
addr2 = 0x51 + 4 * ap->port_no;
-
+
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
fast &= ~0x02;
fast |= 0x01;
pci_write_config_byte(pdev, addr2, fast);
-
+
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt37x_find_mode(ap, adev->pio_mode);
mode &= ~0x8000000; /* No FIFO in PIO */
@@ -578,7 +578,7 @@ static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev)
* Set up the channel for MWDMA or UDMA modes. Much the same as with
* PIO, load the mode number and then set MWDMA or UDMA flag.
*/
-
+
static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -589,13 +589,13 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev)
addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
addr2 = 0x51 + 4 * ap->port_no;
-
+
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
fast &= ~0x02;
fast |= 0x01;
pci_write_config_byte(pdev, addr2, fast);
-
+
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt37x_find_mode(ap, adev->dma_mode);
mode |= 0x8000000; /* FIFO in MWDMA or UDMA */
@@ -611,7 +611,7 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev)
* The 370 and 370A want us to reset the DMA engine each time we
* use it. The 372 and later are fine.
*/
-
+
static void hpt370_bmdma_start(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
@@ -627,7 +627,7 @@ static void hpt370_bmdma_start(struct ata_queued_cmd *qc)
*
* Work around the HPT370 DMA engine.
*/
-
+
static void hpt370_bmdma_stop(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
@@ -635,7 +635,7 @@ static void hpt370_bmdma_stop(struct ata_queued_cmd *qc)
u8 dma_stat = inb(ap->ioaddr.bmdma_addr + 2);
u8 dma_cmd;
unsigned long bmdma = ap->ioaddr.bmdma_addr;
-
+
if (dma_stat & 0x01) {
udelay(20);
dma_stat = inb(bmdma + 2);
@@ -662,9 +662,9 @@ static void hpt370_bmdma_stop(struct ata_queued_cmd *qc)
* @ap: ATA interface
* @adev: device on the interface
*
- * Perform PIO mode setup.
+ * Perform PIO mode setup.
*/
-
+
static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -675,15 +675,15 @@ static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev)
addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
addr2 = 0x51 + 4 * ap->port_no;
-
+
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
fast &= ~0x07;
pci_write_config_byte(pdev, addr2, fast);
-
+
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt37x_find_mode(ap, adev->pio_mode);
-
+
printk("Find mode for %d reports %X\n", adev->pio_mode, mode);
mode &= ~0x80000000; /* No FIFO in PIO */
mode &= ~0x30070000; /* Leave config bits alone */
@@ -699,7 +699,7 @@ static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev)
* Set up the channel for MWDMA or UDMA modes. Much the same as with
* PIO, load the mode number and then set MWDMA or UDMA flag.
*/
-
+
static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -710,12 +710,12 @@ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev)
addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
addr2 = 0x51 + 4 * ap->port_no;
-
+
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
fast &= ~0x07;
pci_write_config_byte(pdev, addr2, fast);
-
+
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt37x_find_mode(ap, adev->dma_mode);
printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode);
@@ -731,14 +731,14 @@ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev)
*
* Clean up after the HPT372 and later DMA engine
*/
-
+
static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int mscreg = 0x50 + 2 * ap->port_no;
u8 bwsr_stat, msc_stat;
-
+
pci_read_config_byte(pdev, 0x6A, &bwsr_stat);
pci_read_config_byte(pdev, mscreg, &msc_stat);
if (bwsr_stat & (1 << ap->port_no))
@@ -768,13 +768,13 @@ static struct scsi_host_template hpt37x_sht = {
/*
* Configuration for HPT370
*/
-
+
static struct ata_port_operations hpt370_port_ops = {
.port_disable = ata_port_disable,
.set_piomode = hpt370_set_piomode,
.set_dmamode = hpt370_set_dmamode,
.mode_filter = hpt370_filter,
-
+
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
@@ -802,18 +802,18 @@ static struct ata_port_operations hpt370_port_ops = {
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = ata_host_stop
-};
+};
/*
* Configuration for HPT370A. Close to 370 but less filters
*/
-
+
static struct ata_port_operations hpt370a_port_ops = {
.port_disable = ata_port_disable,
.set_piomode = hpt370_set_piomode,
.set_dmamode = hpt370_set_dmamode,
.mode_filter = hpt370a_filter,
-
+
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
@@ -841,19 +841,19 @@ static struct ata_port_operations hpt370a_port_ops = {
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = ata_host_stop
-};
+};
/*
* Configuration for HPT372, HPT371, HPT302. Slightly different PIO
* and DMA mode setting functionality.
*/
-
+
static struct ata_port_operations hpt372_port_ops = {
.port_disable = ata_port_disable,
.set_piomode = hpt372_set_piomode,
.set_dmamode = hpt372_set_dmamode,
.mode_filter = ata_pci_default_filter,
-
+
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
@@ -881,19 +881,19 @@ static struct ata_port_operations hpt372_port_ops = {
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = ata_host_stop
-};
+};
/*
* Configuration for HPT374. Mode setting works like 372 and friends
* but we have a different cable detection procedure.
*/
-
+
static struct ata_port_operations hpt374_port_ops = {
.port_disable = ata_port_disable,
.set_piomode = hpt372_set_piomode,
.set_dmamode = hpt372_set_dmamode,
.mode_filter = ata_pci_default_filter,
-
+
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
@@ -921,7 +921,7 @@ static struct ata_port_operations hpt374_port_ops = {
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = ata_host_stop
-};
+};
/**
* htp37x_clock_slot - Turn timing to PC clock entry
@@ -931,7 +931,7 @@ static struct ata_port_operations hpt374_port_ops = {
* Turn the timing data intoa clock slot (0 for 33, 1 for 40, 2 for 50
* and 3 for 66Mhz)
*/
-
+
static int hpt37x_clock_slot(unsigned int freq, unsigned int base)
{
unsigned int f = (base * freq) / 192; /* Mhz */
@@ -946,7 +946,7 @@ static int hpt37x_clock_slot(unsigned int freq, unsigned int base)
/**
* hpt37x_calibrate_dpll - Calibrate the DPLL loop
- * @dev: PCI device
+ * @dev: PCI device
*
* Perform a calibration cycle on the HPT37x DPLL. Returns 1 if this
* succeeds
@@ -957,7 +957,7 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev)
u8 reg5b;
u32 reg5c;
int tries;
-
+
for(tries = 0; tries < 0x5000; tries++) {
udelay(50);
pci_read_config_byte(dev, 0x5b, &reg5b);
@@ -1009,7 +1009,7 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev)
*
* (1) UDMA133 support depends on the bus clock
*/
-
+
static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
/* HPT370 - UDMA100 */
@@ -1072,7 +1072,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
-
+
if (dev->device == PCI_DEVICE_ID_TTI_HPT366) {
/* May be a later chip in disguise. Check */
/* Older chips are in the HPT366 driver. Ignore them */
@@ -1082,7 +1082,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (class_rev == 6)
return -ENODEV;
- switch(class_rev) {
+ switch(class_rev) {
case 3:
port = &info_hpt370;
chip_table = &hpt370;
@@ -1147,16 +1147,16 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
* state on reset when PDIAG is a input.
*/
- pci_write_config_byte(dev, 0x5b, 0x23);
-
+ pci_write_config_byte(dev, 0x5b, 0x23);
+
pci_read_config_dword(dev, 0x70, &freq);
if ((freq >> 12) != 0xABCDE) {
int i;
u8 sr;
u32 total = 0;
-
+
printk(KERN_WARNING "pata_hpt37x: BIOS has not set timing clocks.\n");
-
+
/* This is the process the HPT371 BIOS is reported to use */
for(i = 0; i < 128; i++) {
pci_read_config_byte(dev, 0x78, &sr);
@@ -1166,12 +1166,12 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
freq = total / 128;
}
freq &= 0x1FF;
-
+
/*
* Turn the frequency check into a band and then find a timing
* table to match it.
*/
-
+
clock_slot = hpt37x_clock_slot(freq, chip_table->base);
if (chip_table->clocks[clock_slot] == NULL) {
/*
@@ -1180,7 +1180,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
unsigned int f_low = (MHz[clock_slot] * chip_table->base) / 192;
unsigned int f_high = f_low + 2;
int adjust;
-
+
for(adjust = 0; adjust < 8; adjust++) {
if (hpt37x_calibrate_dpll(dev))
break;
@@ -1197,7 +1197,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
}
/* Check if this works for all cases */
port->private_data = (void *)hpt370_timings_66;
-
+
printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]);
} else {
port->private_data = (void *)chip_table->clocks[clock_slot];
@@ -1205,7 +1205,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
* Perform a final fixup. The 371 and 372 clock determines
* if UDMA133 is available.
*/
-
+
if (clock_slot == 2 && chip_table == &hpt372) { /* 50Mhz */
printk(KERN_WARNING "pata_hpt37x: No UDMA133 support available with 50MHz bus clock.\n");
if (port == &info_hpt372)
@@ -1214,7 +1214,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
}
printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]);
}
- port_info[0] = port_info[1] = port;
+ port_info[0] = port_info[1] = port;
/* Now kick off ATA set up */
return ata_pci_init_one(dev, port_info, 2);
}