diff options
| author | Mark Lord <liml@rtr.ca> | 2008-05-02 02:08:32 -0400 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@redhat.com> | 2008-05-06 11:37:38 -0400 |
| commit | 616d4a98ad8749ebe17a8fcac67df65c321350ac (patch) | |
| tree | b7b94f059367586ad8bef1bc8db9a536a898f337 /drivers/ata/sata_mv.c | |
| parent | 8e7decdb8b132ee970a2636931b7653dec6af472 (diff) | |
sata_mv pci features
Some of the GenIIe EDMA optimizations should not be used
for non-PCI (SOC) devices, and nor for certain configurations
of conventional PCI (non PCI-X, PCIe) buses.
Logic taken/simplified from that in the Marvell proprietary driver.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/sata_mv.c')
| -rw-r--r-- | drivers/ata/sata_mv.c | 39 |
1 files changed, 36 insertions, 3 deletions
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 4eabb737a48..10ef9683f04 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -361,6 +361,7 @@ enum { MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */ MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */ MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */ + MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ @@ -1110,8 +1111,10 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) else if (IS_GEN_IIE(hpriv)) { cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ cfg |= (1 << 22); /* enab 4-entry host queue cache */ - cfg |= (1 << 18); /* enab early completion */ - cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */ + if (HAS_PCI(ap->host)) + cfg |= (1 << 18); /* enab early completion */ + if (hpriv->hp_flags & MV_HP_CUT_THROUGH) + cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ if (want_ncq && sata_pmp_attached(ap)) { cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */ @@ -2496,6 +2499,34 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } +static unsigned int mv_in_pcix_mode(struct ata_host *host) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base; + u32 reg; + + if (!HAS_PCI(host) || !IS_PCIE(hpriv)) + return 0; /* not PCI-X capable */ + reg = readl(mmio + MV_PCI_MODE_OFS); + if ((reg & MV_PCI_MODE_MASK) == 0) + return 0; /* conventional PCI mode */ + return 1; /* chip is in PCI-X mode */ +} + +static int mv_pci_cut_through_okay(struct ata_host *host) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base; + u32 reg; + + if (!mv_in_pcix_mode(host)) { + reg = readl(mmio + PCI_COMMAND_OFS); + if (reg & PCI_COMMAND_MRDTRIG) + return 0; /* not okay */ + } + return 1; /* okay */ +} + static int mv_chip_id(struct ata_host *host, unsigned int board_idx) { struct pci_dev *pdev = to_pci_dev(host->dev); @@ -2563,7 +2594,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) break; case chip_7042: - hp_flags |= MV_HP_PCIE; + hp_flags |= MV_HP_PCIE | MV_HP_CUT_THROUGH; if (pdev->vendor == PCI_VENDOR_ID_TTI && (pdev->device == 0x2300 || pdev->device == 0x2310)) { @@ -2597,6 +2628,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) case chip_6042: hpriv->ops = &mv6xxx_ops; hp_flags |= MV_HP_GEN_IIE; + if (board_idx == chip_6042 && mv_pci_cut_through_okay(host)) + hp_flags |= MV_HP_CUT_THROUGH; switch (pdev->revision) { case 0x0: |