Merge ../scsi-rc-fixes-2.6

15 files changed, 114 insertions, 69 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 3f4aa0c99ee..03f6338acc8 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -6,6 +6,7 @@ menu "Serial ATA (prod) and Parallel ATA (experimental) drivers"
 
 config ATA
 	tristate "ATA device support"
+	depends on BLOCK
 	depends on !(M32R || M68K) || BROKEN
 	depends on !SUN4 || BROKEN
 	select SCSI
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 25929123fff..234197e57e9 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -334,6 +334,14 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(NVIDIA, 0x044d), board_ahci },		/* MCP65 */
 	{ PCI_VDEVICE(NVIDIA, 0x044e), board_ahci },		/* MCP65 */
 	{ PCI_VDEVICE(NVIDIA, 0x044f), board_ahci },		/* MCP65 */
+	{ PCI_VDEVICE(NVIDIA, 0x0554), board_ahci },		/* MCP67 */
+	{ PCI_VDEVICE(NVIDIA, 0x0555), board_ahci },		/* MCP67 */
+	{ PCI_VDEVICE(NVIDIA, 0x0556), board_ahci },		/* MCP67 */
+	{ PCI_VDEVICE(NVIDIA, 0x0557), board_ahci },		/* MCP67 */
+	{ PCI_VDEVICE(NVIDIA, 0x0558), board_ahci },		/* MCP67 */
+	{ PCI_VDEVICE(NVIDIA, 0x0559), board_ahci },		/* MCP67 */
+	{ PCI_VDEVICE(NVIDIA, 0x055a), board_ahci },		/* MCP67 */
+	{ PCI_VDEVICE(NVIDIA, 0x055b), board_ahci },		/* MCP67 */
 
 	/* SiS */
 	{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
@@ -736,8 +744,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 	}
 
 	/* check BUSY/DRQ, perform Command List Override if necessary */
-	ahci_tf_read(ap, &tf);
-	if (tf.command & (ATA_BUSY | ATA_DRQ)) {
+	if (ahci_check_status(ap) & (ATA_BUSY | ATA_DRQ)) {
 		rc = ahci_clo(ap);
 
 		if (rc == -EOPNOTSUPP) {
@@ -1041,7 +1048,7 @@ static void ahci_host_intr(struct ata_port *ap)
 	/* hmmm... a spurious interupt */
 
 	/* some devices send D2H reg with I bit set during NCQ command phase */
-	if (ap->sactive && status & PORT_IRQ_D2H_REG_FIS)
+	if (ap->sactive && (status & PORT_IRQ_D2H_REG_FIS))
 		return;
 
 	/* ignore interim PIO setup fis interrupts */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 5719704eb0e..720174d628f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -126,8 +126,7 @@ enum {
 	ich6_sata		= 7,
 	ich6_sata_ahci		= 8,
 	ich6m_sata_ahci		= 9,
-	ich7m_sata_ahci		= 10,
-	ich8_sata_ahci		= 11,
+	ich8_sata_ahci		= 10,
 
 	/* constants for mapping table */
 	P0			= 0,  /* port 0 */
@@ -227,7 +226,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* 82801GB/GR/GH (ICH7, identical to ICH6) */
 	{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
 	/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
-	{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7m_sata_ahci },
+	{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
 	/* Enterprise Southbridge 2 (where's the datasheet?) */
 	{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
 	/* SATA Controller 1 IDE (ICH8, no datasheet yet) */
@@ -399,23 +398,10 @@ static const struct piix_map_db ich6m_map_db = {
 	.mask = 0x3,
 	.port_enable = 0x5,
 	.present_shift = 4,
-	.map = {
-		/* PM   PS   SM   SS       MAP */
-		{  P0,  P2,  RV,  RV }, /* 00b */
-		{  RV,  RV,  RV,  RV },
-		{  P0,  P2, IDE, IDE }, /* 10b */
-		{  RV,  RV,  RV,  RV },
-	},
-};
-
-static const struct piix_map_db ich7m_map_db = {
-	.mask = 0x3,
-	.port_enable = 0x5,
-	.present_shift = 4,
 
 	/* Map 01b isn't specified in the doc but some notebooks use
-	 * it anyway.  ATM, the only case spotted carries subsystem ID
-	 * 1025:0107.  This is the only difference from ich6m.
+	 * it anyway.  MAP 01b have been spotted on both ICH6M and
+	 * ICH7M.
 	 */
 	.map = {
 		/* PM   PS   SM   SS       MAP */
@@ -432,9 +418,9 @@ static const struct piix_map_db ich8_map_db = {
 	.present_shift = 8,
 	.map = {
 		/* PM   PS   SM   SS       MAP */
-		{  P0,  NA,  P1,  NA }, /* 00b (hardwired) */
+		{  P0,  P2,  P1,  P3 }, /* 00b (hardwired when in AHCI) */
 		{  RV,  RV,  RV,  RV },
-		{  RV,  RV,  RV,  RV }, /* 10b (never) */
+		{  IDE,  IDE,  NA,  NA }, /* 10b (IDE mode) */
 		{  RV,  RV,  RV,  RV },
 	},
 };
@@ -445,7 +431,6 @@ static const struct piix_map_db *piix_map_db_table[] = {
 	[ich6_sata]		= &ich6_map_db,
 	[ich6_sata_ahci]	= &ich6_map_db,
 	[ich6m_sata_ahci]	= &ich6m_map_db,
-	[ich7m_sata_ahci]	= &ich7m_map_db,
 	[ich8_sata_ahci]	= &ich8_map_db,
 };
 
@@ -556,19 +541,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_sata_ops,
 	},
 
-	/* ich7m_sata_ahci: 10 */
-	{
-		.sht		= &piix_sht,
-		.flags		= ATA_FLAG_SATA |
-				  PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
-				  PIIX_FLAG_AHCI,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
-		.port_ops	= &piix_sata_ops,
-	},
-
-	/* ich8_sata_ahci: 11 */
+	/* ich8_sata_ahci: 10 */
 	{
 		.sht		= &piix_sht,
 		.flags		= ATA_FLAG_SATA |
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 77138a39eb0..915a55a6cc1 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -870,7 +870,11 @@ static unsigned int ata_id_xfermask(const u16 *id)
 		 * the PIO timing number for the maximum. Turn it into
 		 * a mask.
 		 */
-		pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ;
+		u8 mode = id[ATA_ID_OLD_PIO_MODES] & 0xFF;
+		if (mode < 5)	/* Valid PIO range */
+                	pio_mask = (2 << mode) - 1;
+		else
+			pio_mask = 1;
 
 		/* But wait.. there's more. Design your standards by
 		 * committee and you too can get a free iordy field to
@@ -5953,7 +5957,7 @@ static void __exit ata_exit(void)
 	destroy_workqueue(ata_aux_wq);
 }
 
-module_init(ata_init);
+subsys_initcall(ata_init);
 module_exit(ata_exit);
 
 static unsigned long ratelimit_time;
@@ -6118,7 +6122,6 @@ EXPORT_SYMBOL_GPL(ata_std_prereset);
 EXPORT_SYMBOL_GPL(ata_std_softreset);
 EXPORT_SYMBOL_GPL(sata_std_hardreset);
 EXPORT_SYMBOL_GPL(ata_std_postreset);
-EXPORT_SYMBOL_GPL(ata_dev_revalidate);
 EXPORT_SYMBOL_GPL(ata_dev_classify);
 EXPORT_SYMBOL_GPL(ata_dev_pair);
 EXPORT_SYMBOL_GPL(ata_port_disable);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b0d0cc41f3e..5c1fc467fc7 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -164,10 +164,10 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
 {
 	int rc = 0;
 	u8 scsi_cmd[MAX_COMMAND_SIZE];
-	u8 args[4], *argbuf = NULL;
+	u8 args[4], *argbuf = NULL, *sensebuf = NULL;
 	int argsize = 0;
-	struct scsi_sense_hdr sshdr;
 	enum dma_data_direction data_dir;
+	int cmd_result;
 
 	if (arg == NULL)
 		return -EINVAL;
@@ -175,6 +175,10 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
 	if (copy_from_user(args, arg, sizeof(args)))
 		return -EFAULT;
 
+	sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
+	if (!sensebuf)
+		return -ENOMEM;
+
 	memset(scsi_cmd, 0, sizeof(scsi_cmd));
 
 	if (args[3]) {
@@ -191,7 +195,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
 		data_dir = DMA_FROM_DEVICE;
 	} else {
 		scsi_cmd[1]  = (3 << 1); /* Non-data */
-		/* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+		scsi_cmd[2]  = 0x20;     /* cc but no off.line or data xfer */
 		data_dir = DMA_NONE;
 	}
 
@@ -210,18 +214,46 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
 
 	/* Good values for timeout and retries?  Values below
 	   from scsi_ioctl_send_command() for default case... */
-	if (scsi_execute_req(scsidev, scsi_cmd, data_dir, argbuf, argsize,
-			     &sshdr, (10*HZ), 5)) {
+	cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize,
+	                          sensebuf, (10*HZ), 5, 0);
+
+	if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
+		u8 *desc = sensebuf + 8;
+		cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
+
+		/* If we set cc then ATA pass-through will cause a
+		 * check condition even if no error. Filter that. */
+		if (cmd_result & SAM_STAT_CHECK_CONDITION) {
+			struct scsi_sense_hdr sshdr;
+			scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
+			                      &sshdr);
+			if (sshdr.sense_key==0 &&
+			    sshdr.asc==0 && sshdr.ascq==0)
+				cmd_result &= ~SAM_STAT_CHECK_CONDITION;
+		}
+
+		/* Send userspace a few ATA registers (same as drivers/ide) */
+		if (sensebuf[0] == 0x72 &&     /* format is "descriptor" */
+		    desc[0] == 0x09 ) {        /* code is "ATA Descriptor" */
+			args[0] = desc[13];    /* status */
+			args[1] = desc[3];     /* error */
+			args[2] = desc[5];     /* sector count (0:7) */
+			if (copy_to_user(arg, args, sizeof(args)))
+				rc = -EFAULT;
+		}
+	}
+
+
+	if (cmd_result) {
 		rc = -EIO;
 		goto error;
 	}
 
-	/* Need code to retrieve data from check condition? */
-
 	if ((argbuf)
 	 && copy_to_user(arg + sizeof(args), argbuf, argsize))
 		rc = -EFAULT;
 error:
+	kfree(sensebuf);
 	kfree(argbuf);
 	return rc;
 }
@@ -1580,9 +1612,9 @@ early_finish:
 
 err_did:
 	ata_qc_free(qc);
-err_mem:
 	cmd->result = (DID_ERROR << 16);
 	done(cmd);
+err_mem:
 	DPRINTK("EXIT - internal\n");
 	return 0;
 
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 06daaa3736a..7645f2b30cc 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -981,6 +981,15 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 		mask = (1 << 2) | (1 << 0);
 		if ((tmp8 & mask) != mask)
 			legacy_mode = (1 << 3);
+#if defined(CONFIG_NO_ATA_LEGACY)
+		/* Some platforms with PCI limits cannot address compat
+		   port space. In that case we punt if their firmware has
+		   left a device in compatibility mode */
+		if (legacy_mode) {
+			printk(KERN_ERR "ata: Compatibility mode ATA is not supported on this platform, skipping.\n");
+			return -EOPNOTSUPP;
+		}
+#endif
 	}
 
 	rc = pci_request_regions(pdev, DRV_NAME);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index a5ecb71390a..0ed263be652 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -53,6 +53,7 @@ extern unsigned ata_exec_internal(struct ata_device *dev,
 extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
 extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 			   int post_reset, u16 *id);
+extern int ata_dev_revalidate(struct ata_device *dev, int post_reset);
 extern int ata_dev_configure(struct ata_device *dev, int print_info);
 extern int sata_down_spd_limit(struct ata_port *ap);
 extern int sata_set_spd_needed(struct ata_port *ap);
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 29234c89711..5c47a9e0e0c 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -677,6 +677,8 @@ static const struct pci_device_id amd[] = {
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE),	8 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE),	8 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE),	8 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE),	8 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE),	8 },
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE),		9 },
 
 	{ },
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 690828eb522..96a098020a8 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -92,7 +92,7 @@ static int artop6260_pre_reset(struct ata_port *ap)
 		return -ENOENT;
 
 	pci_read_config_byte(pdev, 0x49, &tmp);
-	if (tmp & (1 >> ap->port_no))
+	if (tmp & (1 << ap->port_no))
 		ap->cbl = ATA_CBL_PATA40;
 	else
 		ap->cbl = ATA_CBL_PATA80;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 7350443948c..fce3fcdc7e7 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.5"
+#define DRV_VERSION	"0.5.1"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -453,7 +453,13 @@ static int hpt37x_pre_reset(struct ata_port *ap)
 {
 	u8 scr2, ata66;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
+	static const struct pci_bits hpt37x_enable_bits[] = {
+		{ 0x50, 1, 0x04, 0x04 },
+		{ 0x54, 1, 0x04, 0x04 }
+	};
+	if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
+		return -ENOENT;
+		
 	pci_read_config_byte(pdev, 0x5B, &scr2);
 	pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
 	/* Cable register now active */
@@ -488,10 +494,17 @@ static void hpt37x_error_handler(struct ata_port *ap)
 
 static int hpt374_pre_reset(struct ata_port *ap)
 {
+	static const struct pci_bits hpt37x_enable_bits[] = {
+		{ 0x50, 1, 0x04, 0x04 },
+		{ 0x54, 1, 0x04, 0x04 }
+	};
 	u16 mcr3, mcr6;
 	u8 ata66;
-
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
+		return -ENOENT;
+		
 	/* Do the extra channel work */
 	pci_read_config_word(pdev, 0x52, &mcr3);
 	pci_read_config_word(pdev, 0x56, &mcr6);
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 7977f471d5e..2c3cc0ccc60 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -141,7 +141,7 @@ static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned
 				memcpy(&pad, buf + buflen - slop, slop);
 				outl(le32_to_cpu(pad), ap->ioaddr.data_addr);
 			} else {
-				pad = cpu_to_le16(inl(ap->ioaddr.data_addr));
+				pad = cpu_to_le32(inl(ap->ioaddr.data_addr));
 				memcpy(buf + buflen - slop, &pad, slop);
 			}
 		}
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 323b6071080..d65ebfd7c7b 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -117,10 +117,14 @@ static const struct pci_device_id nv_pci_tbl[] = {
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
-	{ PCI_VDEVICE(NVIDIA, 0x045c), GENERIC },
-	{ PCI_VDEVICE(NVIDIA, 0x045d), GENERIC },
-	{ PCI_VDEVICE(NVIDIA, 0x045e), GENERIC },
-	{ PCI_VDEVICE(NVIDIA, 0x045f), GENERIC },
+	{ PCI_VDEVICE(NVIDIA, 0x045c), GENERIC }, /* MCP65 */
+	{ PCI_VDEVICE(NVIDIA, 0x045d), GENERIC }, /* MCP65 */
+	{ PCI_VDEVICE(NVIDIA, 0x045e), GENERIC }, /* MCP65 */
+	{ PCI_VDEVICE(NVIDIA, 0x045f), GENERIC }, /* MCP65 */
+	{ PCI_VDEVICE(NVIDIA, 0x0550), GENERIC }, /* MCP67 */
+	{ PCI_VDEVICE(NVIDIA, 0x0551), GENERIC }, /* MCP67 */
+	{ PCI_VDEVICE(NVIDIA, 0x0552), GENERIC }, /* MCP67 */
+	{ PCI_VDEVICE(NVIDIA, 0x0553), GENERIC }, /* MCP67 */
 	{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
 		PCI_ANY_ID, PCI_ANY_ID,
 		PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 8bcdfa64667..72eda5160fa 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -260,6 +260,7 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = {
 #if 0
 	{ PCI_VDEVICE(PROMISE, 0x3570), board_20771 },
 #endif
+	{ PCI_VDEVICE(PROMISE, 0x3577), board_20771 },
 
 	{ }	/* terminate list */
 };
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 0738f52463a..9d1235ba06b 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -240,7 +240,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct ata_probe_ent *probe_ent = NULL;
 	int rc;
 	u32 genctl;
-	struct ata_port_info *ppi[2];
+	struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
 	int pci_dev_busy = 0;
 	u8 pmr;
 	u8 port2_start;
@@ -265,27 +265,20 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		goto err_out_regions;
 
-	ppi[0] = ppi[1] = &sis_port_info;
-	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-	if (!probe_ent) {
-		rc = -ENOMEM;
-		goto err_out_regions;
-	}
-
 	/* check and see if the SCRs are in IO space or PCI cfg space */
 	pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
 	if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
-		probe_ent->port_flags |= SIS_FLAG_CFGSCR;
+		pi.flags |= SIS_FLAG_CFGSCR;
 
 	/* if hardware thinks SCRs are in IO space, but there are
 	 * no IO resources assigned, change to PCI cfg space.
 	 */
-	if ((!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) &&
+	if ((!(pi.flags & SIS_FLAG_CFGSCR)) &&
 	    ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
 	     (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
 		genctl &= ~GENCTL_IOMAPPED_SCR;
 		pci_write_config_dword(pdev, SIS_GENCTL, genctl);
-		probe_ent->port_flags |= SIS_FLAG_CFGSCR;
+		pi.flags |= SIS_FLAG_CFGSCR;
 	}
 
 	pci_read_config_byte(pdev, SIS_PMR, &pmr);
@@ -306,6 +299,12 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		port2_start = 0x20;
 	}
 
+	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+	if (!probe_ent) {
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
 	if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) {
 		probe_ent->port[0].scr_addr =
 			pci_resource_start(pdev, SIS_SCR_PCI_BAR);
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index f4455a1efe2..1c7f19aecc2 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -230,7 +230,7 @@ static int vt6420_prereset(struct ata_port *ap)
 	int online;
 
 	/* don't do any SCR stuff if we're not loading */
-	if (!ATA_PFLAG_LOADING)
+	if (!(ap->pflags & ATA_PFLAG_LOADING))
 		goto skip_scr;
 
 	/* Resume phy.  This is the old resume sequence from