aboutsummaryrefslogtreecommitdiff
path: root/drivers/edac/r82600_edac.c
diff options
context:
space:
mode:
authorAlan Cox <alan@lxorguk.ukuu.org.uk>2006-01-18 17:44:12 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-01-18 19:20:31 -0800
commit2f768af73fea4c70f9046388a7ff648ad11f028e (patch)
tree5b9b95b99a39bb46a1dfca6416f4d8c9d29be6ad /drivers/edac/r82600_edac.c
parent0d88a10e566d46bffc214c974e5cf5abe38d8da8 (diff)
[PATCH] EDAC: drivers for Radisys 82600
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/edac/r82600_edac.c')
-rw-r--r--drivers/edac/r82600_edac.c407
1 files changed, 407 insertions, 0 deletions
diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c
new file mode 100644
index 00000000000..b6399a54256
--- /dev/null
+++ b/drivers/edac/r82600_edac.c
@@ -0,0 +1,407 @@
+/*
+ * Radisys 82600 Embedded chipset Memory Controller kernel module
+ * (C) 2005 EADS Astrium
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Tim Small <tim@buttersideup.com>, based on work by Thayne
+ * Harbaugh, Dan Hollis <goemon at anime dot net> and others.
+ *
+ * $Id: edac_r82600.c,v 1.1.2.6 2005/10/05 00:43:44 dsp_llnl Exp $
+ *
+ * Written with reference to 82600 High Integration Dual PCI System
+ * Controller Data Book:
+ * http://www.radisys.com/files/support_downloads/007-01277-0002.82600DataBook.pdf
+ * references to this document given in []
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <linux/slab.h>
+
+#include "edac_mc.h"
+
+/* Radisys say "The 82600 integrates a main memory SDRAM controller that
+ * supports up to four banks of memory. The four banks can support a mix of
+ * sizes of 64 bit wide (72 bits with ECC) Synchronous DRAM (SDRAM) DIMMs,
+ * each of which can be any size from 16MB to 512MB. Both registered (control
+ * signals buffered) and unbuffered DIMM types are supported. Mixing of
+ * registered and unbuffered DIMMs as well as mixing of ECC and non-ECC DIMMs
+ * is not allowed. The 82600 SDRAM interface operates at the same frequency as
+ * the CPU bus, 66MHz, 100MHz or 133MHz."
+ */
+
+#define R82600_NR_CSROWS 4
+#define R82600_NR_CHANS 1
+#define R82600_NR_DIMMS 4
+
+#define R82600_BRIDGE_ID 0x8200
+
+/* Radisys 82600 register addresses - device 0 function 0 - PCI bridge */
+#define R82600_DRAMC 0x57 /* Various SDRAM related control bits
+ * all bits are R/W
+ *
+ * 7 SDRAM ISA Hole Enable
+ * 6 Flash Page Mode Enable
+ * 5 ECC Enable: 1=ECC 0=noECC
+ * 4 DRAM DIMM Type: 1=
+ * 3 BIOS Alias Disable
+ * 2 SDRAM BIOS Flash Write Enable
+ * 1:0 SDRAM Refresh Rate: 00=Disabled
+ * 01=7.8usec (256Mbit SDRAMs)
+ * 10=15.6us 11=125usec
+ */
+
+#define R82600_SDRAMC 0x76 /* "SDRAM Control Register"
+ * More SDRAM related control bits
+ * all bits are R/W
+ *
+ * 15:8 Reserved.
+ *
+ * 7:5 Special SDRAM Mode Select
+ *
+ * 4 Force ECC
+ *
+ * 1=Drive ECC bits to 0 during
+ * write cycles (i.e. ECC test mode)
+ *
+ * 0=Normal ECC functioning
+ *
+ * 3 Enhanced Paging Enable
+ *
+ * 2 CAS# Latency 0=3clks 1=2clks
+ *
+ * 1 RAS# to CAS# Delay 0=3 1=2
+ *
+ * 0 RAS# Precharge 0=3 1=2
+ */
+
+#define R82600_EAP 0x80 /* ECC Error Address Pointer Register
+ *
+ * 31 Disable Hardware Scrubbing (RW)
+ * 0=Scrub on corrected read
+ * 1=Don't scrub on corrected read
+ *
+ * 30:12 Error Address Pointer (RO)
+ * Upper 19 bits of error address
+ *
+ * 11:4 Syndrome Bits (RO)
+ *
+ * 3 BSERR# on multibit error (RW)
+ * 1=enable 0=disable
+ *
+ * 2 NMI on Single Bit Eror (RW)
+ * 1=NMI triggered by SBE n.b. other
+ * prerequeists
+ * 0=NMI not triggered
+ *
+ * 1 MBE (R/WC)
+ * read 1=MBE at EAP (see above)
+ * read 0=no MBE, or SBE occurred first
+ * write 1=Clear MBE status (must also
+ * clear SBE)
+ * write 0=NOP
+ *
+ * 1 SBE (R/WC)
+ * read 1=SBE at EAP (see above)
+ * read 0=no SBE, or MBE occurred first
+ * write 1=Clear SBE status (must also
+ * clear MBE)
+ * write 0=NOP
+ */
+
+#define R82600_DRBA 0x60 /* + 0x60..0x63 SDRAM Row Boundry Address
+ * Registers
+ *
+ * 7:0 Address lines 30:24 - upper limit of
+ * each row [p57]
+ */
+
+struct r82600_error_info {
+ u32 eapr;
+};
+
+
+static unsigned int disable_hardware_scrub = 0;
+
+
+static void r82600_get_error_info (struct mem_ctl_info *mci,
+ struct r82600_error_info *info)
+{
+ pci_read_config_dword(mci->pdev, R82600_EAP, &info->eapr);
+
+ if (info->eapr & BIT(0))
+ /* Clear error to allow next error to be reported [p.62] */
+ pci_write_bits32(mci->pdev, R82600_EAP,
+ ((u32) BIT(0) & (u32) BIT(1)),
+ ((u32) BIT(0) & (u32) BIT(1)));
+
+ if (info->eapr & BIT(1))
+ /* Clear error to allow next error to be reported [p.62] */
+ pci_write_bits32(mci->pdev, R82600_EAP,
+ ((u32) BIT(0) & (u32) BIT(1)),
+ ((u32) BIT(0) & (u32) BIT(1)));
+}
+
+
+static int r82600_process_error_info (struct mem_ctl_info *mci,
+ struct r82600_error_info *info, int handle_errors)
+{
+ int error_found;
+ u32 eapaddr, page;
+ u32 syndrome;
+
+ error_found = 0;
+
+ /* bits 30:12 store the upper 19 bits of the 32 bit error address */
+ eapaddr = ((info->eapr >> 12) & 0x7FFF) << 13;
+ /* Syndrome in bits 11:4 [p.62] */
+ syndrome = (info->eapr >> 4) & 0xFF;
+
+ /* the R82600 reports at less than page *
+ * granularity (upper 19 bits only) */
+ page = eapaddr >> PAGE_SHIFT;
+
+ if (info->eapr & BIT(0)) { /* CE? */
+ error_found = 1;
+
+ if (handle_errors)
+ edac_mc_handle_ce(
+ mci, page, 0, /* not avail */
+ syndrome,
+ edac_mc_find_csrow_by_page(mci, page),
+ 0, /* channel */
+ mci->ctl_name);
+ }
+
+ if (info->eapr & BIT(1)) { /* UE? */
+ error_found = 1;
+
+ if (handle_errors)
+ /* 82600 doesn't give enough info */
+ edac_mc_handle_ue(mci, page, 0,
+ edac_mc_find_csrow_by_page(mci, page),
+ mci->ctl_name);
+ }
+
+ return error_found;
+}
+
+static void r82600_check(struct mem_ctl_info *mci)
+{
+ struct r82600_error_info info;
+
+ debugf1("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__);
+ r82600_get_error_info(mci, &info);
+ r82600_process_error_info(mci, &info, 1);
+}
+
+static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ int rc = -ENODEV;
+ int index;
+ struct mem_ctl_info *mci = NULL;
+ u8 dramcr;
+ u32 ecc_on;
+ u32 reg_sdram;
+ u32 eapr;
+ u32 scrub_disabled;
+ u32 sdram_refresh_rate;
+ u32 row_high_limit_last = 0;
+ u32 eap_init_bits;
+
+ debugf0("MC: " __FILE__ ": %s()\n", __func__);
+
+
+ pci_read_config_byte(pdev, R82600_DRAMC, &dramcr);
+ pci_read_config_dword(pdev, R82600_EAP, &eapr);
+
+ ecc_on = dramcr & BIT(5);
+ reg_sdram = dramcr & BIT(4);
+ scrub_disabled = eapr & BIT(31);
+ sdram_refresh_rate = dramcr & (BIT(0) | BIT(1));
+
+ debugf2("MC: " __FILE__ ": %s(): sdram refresh rate = %#0x\n",
+ __func__, sdram_refresh_rate);
+
+ debugf2("MC: " __FILE__ ": %s(): DRAMC register = %#0x\n", __func__,
+ dramcr);
+
+ mci = edac_mc_alloc(0, R82600_NR_CSROWS, R82600_NR_CHANS);
+
+ if (mci == NULL) {
+ rc = -ENOMEM;
+ goto fail;
+ }
+
+ debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+
+ mci->pdev = pdev;
+ mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
+
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
+ /* FIXME try to work out if the chip leads have been *
+ * used for COM2 instead on this board? [MA6?] MAYBE: */
+
+ /* On the R82600, the pins for memory bits 72:65 - i.e. the *
+ * EC bits are shared with the pins for COM2 (!), so if COM2 *
+ * is enabled, we assume COM2 is wired up, and thus no EDAC *
+ * is possible. */
+ mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
+ if (ecc_on) {
+ if (scrub_disabled)
+ debugf3("MC: " __FILE__ ": %s(): mci = %p - "
+ "Scrubbing disabled! EAP: %#0x\n", __func__,
+ mci, eapr);
+ } else
+ mci->edac_cap = EDAC_FLAG_NONE;
+
+ mci->mod_name = BS_MOD_STR;
+ mci->mod_ver = "$Revision: 1.1.2.6 $";
+ mci->ctl_name = "R82600";
+ mci->edac_check = r82600_check;
+ mci->ctl_page_to_phys = NULL;
+
+ for (index = 0; index < mci->nr_csrows; index++) {
+ struct csrow_info *csrow = &mci->csrows[index];
+ u8 drbar; /* sDram Row Boundry Address Register */
+ u32 row_high_limit;
+ u32 row_base;
+
+ /* find the DRAM Chip Select Base address and mask */
+ pci_read_config_byte(mci->pdev, R82600_DRBA + index, &drbar);
+
+ debugf1("MC%d: " __FILE__ ": %s() Row=%d DRBA = %#0x\n",
+ mci->mc_idx, __func__, index, drbar);
+
+ row_high_limit = ((u32) drbar << 24);
+/* row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */
+
+ debugf1("MC%d: " __FILE__ ": %s() Row=%d, "
+ "Boundry Address=%#0x, Last = %#0x \n",
+ mci->mc_idx, __func__, index, row_high_limit,
+ row_high_limit_last);
+
+ /* Empty row [p.57] */
+ if (row_high_limit == row_high_limit_last)
+ continue;
+
+ row_base = row_high_limit_last;
+
+ csrow->first_page = row_base >> PAGE_SHIFT;
+ csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
+ csrow->nr_pages = csrow->last_page - csrow->first_page + 1;
+ /* Error address is top 19 bits - so granularity is *
+ * 14 bits */
+ csrow->grain = 1 << 14;
+ csrow->mtype = reg_sdram ? MEM_RDDR : MEM_DDR;
+ /* FIXME - check that this is unknowable with this chipset */
+ csrow->dtype = DEV_UNKNOWN;
+
+ /* Mode is global on 82600 */
+ csrow->edac_mode = ecc_on ? EDAC_SECDED : EDAC_NONE;
+ row_high_limit_last = row_high_limit;
+ }
+
+ /* clear counters */
+ /* FIXME should we? */
+
+ if (edac_mc_add_mc(mci)) {
+ debugf3("MC: " __FILE__
+ ": %s(): failed edac_mc_add_mc()\n", __func__);
+ goto fail;
+ }
+
+ /* get this far and it's successful */
+
+ /* Clear error flags to allow next error to be reported [p.62] */
+ /* Test systems seem to always have the UE flag raised on boot */
+
+ eap_init_bits = BIT(0) & BIT(1);
+ if (disable_hardware_scrub) {
+ eap_init_bits |= BIT(31);
+ debugf3("MC: " __FILE__ ": %s(): Disabling Hardware Scrub "
+ "(scrub on error)\n", __func__);
+ }
+
+ pci_write_bits32(mci->pdev, R82600_EAP, eap_init_bits,
+ eap_init_bits);
+
+ debugf3("MC: " __FILE__ ": %s(): success\n", __func__);
+ return 0;
+
+fail:
+ if (mci)
+ edac_mc_free(mci);
+
+ return rc;
+}
+
+/* returns count (>= 0), or negative on error */
+static int __devinit r82600_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ debugf0("MC: " __FILE__ ": %s()\n", __func__);
+
+ /* don't need to call pci_device_enable() */
+ return r82600_probe1(pdev, ent->driver_data);
+}
+
+
+static void __devexit r82600_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+
+ if (((mci = edac_mc_find_mci_by_pdev(pdev)) != NULL) &&
+ !edac_mc_del_mc(mci))
+ edac_mc_free(mci);
+}
+
+
+static const struct pci_device_id r82600_pci_tbl[] __devinitdata = {
+ {PCI_DEVICE(PCI_VENDOR_ID_RADISYS, R82600_BRIDGE_ID)},
+ {0,} /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, r82600_pci_tbl);
+
+
+static struct pci_driver r82600_driver = {
+ .name = BS_MOD_STR,
+ .probe = r82600_init_one,
+ .remove = __devexit_p(r82600_remove_one),
+ .id_table = r82600_pci_tbl,
+};
+
+
+int __init r82600_init(void)
+{
+ return pci_register_driver(&r82600_driver);
+}
+
+
+static void __exit r82600_exit(void)
+{
+ pci_unregister_driver(&r82600_driver);
+}
+
+
+module_init(r82600_init);
+module_exit(r82600_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD Ltd. "
+ "on behalf of EADS Astrium");
+MODULE_DESCRIPTION("MC support for Radisys 82600 memory controllers");
+
+module_param(disable_hardware_scrub, bool, 0644);
+MODULE_PARM_DESC(disable_hardware_scrub,
+ "If set, disable the chipset's automatic scrub for CEs");