diff options
| author | Stefan Richter <stefanr@s5r6.in-berlin.de> | 2008-03-24 20:54:28 +0100 |
|---|---|---|
| committer | Stefan Richter <stefanr@s5r6.in-berlin.de> | 2008-04-18 17:55:36 +0200 |
| commit | c9755e14a01987ada4063e8b4c50c2b6738d879e (patch) | |
| tree | 41a593c4b9ac10ccc4ad031510438e4551e51b5b /drivers/firewire/fw-topology.c | |
| parent | 1dadff71d6356ebb804c3f4f1d3049247e16111c (diff) | |
firewire: reread config ROM when device reset the bus
When a device changes its configuration ROM, it announces this with a
bus reset. firewire-core has to check which node initiated a bus reset
and whether any unit directories went away or were added on this node.
Tested with an IOI FWB-IDE01AB which has its link-on bit set if bus
power is available but does not respond to ROM read requests if self
power is off. This implements
- recognition of the units if self power is switched on after fw-core
gave up the initial attempt to read the config ROM,
- shutdown of the units when self power is switched off.
Also tested with a second PC running Linux/ieee1394. When the eth1394
driver is inserted and removed on that node, fw-core now notices the
addition and removal of the IPv4 unit on the ieee1394 node.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Diffstat (limited to 'drivers/firewire/fw-topology.c')
| -rw-r--r-- | drivers/firewire/fw-topology.c | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index d2c7a3d7e1c..ebdec4c6c68 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -108,6 +108,7 @@ static struct fw_node *fw_node_create(u32 sid, int port_count, int color) node->node_id = LOCAL_BUS | SELF_ID_PHY_ID(sid); node->link_on = SELF_ID_LINK_ON(sid); node->phy_speed = SELF_ID_PHY_SPEED(sid); + node->initiated_reset = SELF_ID_PHY_INITIATOR(sid); node->port_count = port_count; atomic_set(&node->ref_count, 1); @@ -431,6 +432,8 @@ update_tree(struct fw_card *card, struct fw_node *root) event = FW_NODE_LINK_OFF; else if (!node0->link_on && node1->link_on) event = FW_NODE_LINK_ON; + else if (node1->initiated_reset && node1->link_on) + event = FW_NODE_INITIATED_RESET; else event = FW_NODE_UPDATED; |