ide: add ide_use_fast_pio() helper (v3)

* add ide_use_fast_pio() helper for use by host drivers

* add DMA capability and hwif->autodma checks to ide_use_dma()

  - au1xxx-ide/it8213/it821x drivers didn't check for (id->capability & 1)

    [ for the IT8211/2 in SMART mode this check shouldn't be made but since
      in it821x_fixups() we set DMA bit explicitly:

               if(strstr(id->model, "Integrated Technology Express")) {
                       /* In raid mode the ident block is slightly buggy
                          We need to set the bits so that the IDE layer knows
                          LBA28. LBA48 and DMA ar valid */
                       id->capability |= 3;            /* LBA28, DMA */

       we are better off using generic helper if we can ]

  - ide-cris driver didn't set ->autodma

    [ before the patch hwif->autodma was only checked in the chipset specific
      hwif->ide_dma_check implementations, for ide-cris it is cris_dma_check()
      function so there no behavior change here ]

v2:
* updated patch description (thanks to Alan Cox for the feedback)

v3:
* updated for scc_pata driver

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 5 insertions, 7 deletions

diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 5797e0b5a13..7afb715b86e 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -821,6 +821,9 @@ init_e100_ide (void)
 		hwif->ultra_mask = cris_ultra_mask;
 		hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
 		hwif->swdma_mask = 0x07; /* Singleword DMA 0-2 */
+		hwif->autodma = 1;
+		hwif->drives[0].autodma = 1;
+		hwif->drives[1].autodma = 1;
 	}
 
 	/* Reset pulse */
@@ -1046,14 +1049,9 @@ static ide_startstop_t cris_dma_intr (ide_drive_t *drive)
 static int cris_dma_check(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	struct hd_driveid* id = drive->id;
 
-	if (id && (id->capability & 1)) {
-		if (ide_use_dma(drive)) {
-			if (cris_config_drive_for_dma(drive))
-				return hwif->ide_dma_on(drive);
-		}
-	}
+	if (ide_use_dma(drive) && cris_config_drive_for_dma(drive))
+		return hwif->ide_dma_on(drive);
 
 	return hwif->ide_dma_off_quietly(drive);
 }