aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/hpt366.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
commit2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch)
tree17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/hpt366.c
parent2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff)
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/hpt366.c')
-rw-r--r--drivers/ide/hpt366.c1643
1 files changed, 1643 insertions, 0 deletions
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
new file mode 100644
index 00000000000..a7909e9c720
--- /dev/null
+++ b/drivers/ide/hpt366.c
@@ -0,0 +1,1643 @@
+/*
+ * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
+ * Portions Copyright (C) 2001 Sun Microsystems, Inc.
+ * Portions Copyright (C) 2003 Red Hat Inc
+ * Portions Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ * Portions Copyright (C) 2005-2008 MontaVista Software, Inc.
+ *
+ * Thanks to HighPoint Technologies for their assistance, and hardware.
+ * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
+ * donation of an ABit BP6 mainboard, processor, and memory acellerated
+ * development and support.
+ *
+ *
+ * HighPoint has its own drivers (open source except for the RAID part)
+ * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/.
+ * This may be useful to anyone wanting to work on this driver, however do not
+ * trust them too much since the code tends to become less and less meaningful
+ * as the time passes... :-/
+ *
+ * Note that final HPT370 support was done by force extraction of GPL.
+ *
+ * - add function for getting/setting power status of drive
+ * - the HPT370's state machine can get confused. reset it before each dma
+ * xfer to prevent that from happening.
+ * - reset state engine whenever we get an error.
+ * - check for busmaster state at end of dma.
+ * - use new highpoint timings.
+ * - detect bus speed using highpoint register.
+ * - use pll if we don't have a clock table. added a 66MHz table that's
+ * just 2x the 33MHz table.
+ * - removed turnaround. NOTE: we never want to switch between pll and
+ * pci clocks as the chip can glitch in those cases. the highpoint
+ * approved workaround slows everything down too much to be useful. in
+ * addition, we would have to serialize access to each chip.
+ * Adrian Sun <a.sun@sun.com>
+ *
+ * add drive timings for 66MHz PCI bus,
+ * fix ATA Cable signal detection, fix incorrect /proc info
+ * add /proc display for per-drive PIO/DMA/UDMA mode and
+ * per-channel ATA-33/66 Cable detect.
+ * Duncan Laurie <void@sun.com>
+ *
+ * fixup /proc output for multiple controllers
+ * Tim Hockin <thockin@sun.com>
+ *
+ * On hpt366:
+ * Reset the hpt366 on error, reset on dma
+ * Fix disabling Fast Interrupt hpt366.
+ * Mike Waychison <crlf@sun.com>
+ *
+ * Added support for 372N clocking and clock switching. The 372N needs
+ * different clocks on read/write. This requires overloading rw_disk and
+ * other deeply crazy things. Thanks to <http://www.hoerstreich.de> for
+ * keeping me sane.
+ * Alan Cox <alan@redhat.com>
+ *
+ * - fix the clock turnaround code: it was writing to the wrong ports when
+ * called for the secondary channel, caching the current clock mode per-
+ * channel caused the cached register value to get out of sync with the
+ * actual one, the channels weren't serialized, the turnaround shouldn't
+ * be done on 66 MHz PCI bus
+ * - disable UltraATA/100 for HPT370 by default as the 33 MHz clock being used
+ * does not allow for this speed anyway
+ * - avoid touching disabled channels (e.g. HPT371/N are single channel chips,
+ * their primary channel is kind of virtual, it isn't tied to any pins)
+ * - fix/remove bad/unused timing tables and use one set of tables for the whole
+ * HPT37x chip family; save space by introducing the separate transfer mode
+ * table in which the mode lookup is done
+ * - use f_CNT value saved by the HighPoint BIOS as reading it directly gives
+ * the wrong PCI frequency since DPLL has already been calibrated by BIOS;
+ * read it only from the function 0 of HPT374 chips
+ * - fix the hotswap code: it caused RESET- to glitch when tristating the bus,
+ * and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead
+ * - pass to init_chipset() handlers a copy of the IDE PCI device structure as
+ * they tamper with its fields
+ * - pass to the init_setup handlers a copy of the ide_pci_device_t structure
+ * since they may tamper with its fields
+ * - prefix the driver startup messages with the real chip name
+ * - claim the extra 240 bytes of I/O space for all chips
+ * - optimize the UltraDMA filtering and the drive list lookup code
+ * - use pci_get_slot() to get to the function 1 of HPT36x/374
+ * - cache offset of the channel's misc. control registers (MCRs) being used
+ * throughout the driver
+ * - only touch the relevant MCR when detecting the cable type on HPT374's
+ * function 1
+ * - rename all the register related variables consistently
+ * - move all the interrupt twiddling code from the speedproc handlers into
+ * init_hwif_hpt366(), also grouping all the DMA related code together there
+ * - merge HPT36x/HPT37x speedproc handlers, fix PIO timing register mask and
+ * separate the UltraDMA and MWDMA masks there to avoid changing PIO timings
+ * when setting an UltraDMA mode
+ * - fix hpt3xx_tune_drive() to set the PIO mode requested, not always select
+ * the best possible one
+ * - clean up DMA timeout handling for HPT370
+ * - switch to using the enumeration type to differ between the numerous chip
+ * variants, matching PCI device/revision ID with the chip type early, at the
+ * init_setup stage
+ * - extend the hpt_info structure to hold the DPLL and PCI clock frequencies,
+ * stop duplicating it for each channel by storing the pointer in the pci_dev
+ * structure: first, at the init_setup stage, point it to a static "template"
+ * with only the chip type and its specific base DPLL frequency, the highest
+ * UltraDMA mode, and the chip settings table pointer filled, then, at the
+ * init_chipset stage, allocate per-chip instance and fill it with the rest
+ * of the necessary information
+ * - get rid of the constant thresholds in the HPT37x PCI clock detection code,
+ * switch to calculating PCI clock frequency based on the chip's base DPLL
+ * frequency
+ * - switch to using the DPLL clock and enable UltraATA/133 mode by default on
+ * anything newer than HPT370/A (except HPT374 that is not capable of this
+ * mode according to the manual)
+ * - fold PCI clock detection and DPLL setup code into init_chipset_hpt366(),
+ * also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips;
+ * unify HPT36x/37x timing setup code and the speedproc handlers by joining
+ * the register setting lists into the table indexed by the clock selected
+ * - set the correct hwif->ultra_mask for each individual chip
+ * - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards
+ * Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/blkdev.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#define DRV_NAME "hpt366"
+
+/* various tuning parameters */
+#define HPT_RESET_STATE_ENGINE
+#undef HPT_DELAY_INTERRUPT
+#define HPT_SERIALIZE_IO 0
+
+static const char *quirk_drives[] = {
+ "QUANTUM FIREBALLlct08 08",
+ "QUANTUM FIREBALLP KA6.4",
+ "QUANTUM FIREBALLP LM20.4",
+ "QUANTUM FIREBALLP LM20.5",
+ NULL
+};
+
+static const char *bad_ata100_5[] = {
+ "IBM-DTLA-307075",
+ "IBM-DTLA-307060",
+ "IBM-DTLA-307045",
+ "IBM-DTLA-307030",
+ "IBM-DTLA-307020",
+ "IBM-DTLA-307015",
+ "IBM-DTLA-305040",
+ "IBM-DTLA-305030",
+ "IBM-DTLA-305020",
+ "IC35L010AVER07-0",
+ "IC35L020AVER07-0",
+ "IC35L030AVER07-0",
+ "IC35L040AVER07-0",
+ "IC35L060AVER07-0",
+ "WDC AC310200R",
+ NULL
+};
+
+static const char *bad_ata66_4[] = {
+ "IBM-DTLA-307075",
+ "IBM-DTLA-307060",
+ "IBM-DTLA-307045",
+ "IBM-DTLA-307030",
+ "IBM-DTLA-307020",
+ "IBM-DTLA-307015",
+ "IBM-DTLA-305040",
+ "IBM-DTLA-305030",
+ "IBM-DTLA-305020",
+ "IC35L010AVER07-0",
+ "IC35L020AVER07-0",
+ "IC35L030AVER07-0",
+ "IC35L040AVER07-0",
+ "IC35L060AVER07-0",
+ "WDC AC310200R",
+ "MAXTOR STM3320620A",
+ NULL
+};
+
+static const char *bad_ata66_3[] = {
+ "WDC AC310200R",
+ NULL
+};
+
+static const char *bad_ata33[] = {
+ "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2",
+ "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
+ "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
+ "Maxtor 90510D4",
+ "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
+ "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
+ "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
+ NULL
+};
+
+static u8 xfer_speeds[] = {
+ XFER_UDMA_6,
+ XFER_UDMA_5,
+ XFER_UDMA_4,
+ XFER_UDMA_3,
+ XFER_UDMA_2,
+ XFER_UDMA_1,
+ XFER_UDMA_0,
+
+ XFER_MW_DMA_2,
+ XFER_MW_DMA_1,
+ XFER_MW_DMA_0,
+
+ XFER_PIO_4,
+ XFER_PIO_3,
+ XFER_PIO_2,
+ XFER_PIO_1,
+ XFER_PIO_0
+};
+
+/* Key for bus clock timings
+ * 36x 37x
+ * bits bits
+ * 0:3 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA.
+ * cycles = value + 1
+ * 4:7 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA.
+ * cycles = value + 1
+ * 8:11 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file
+ * register access.
+ * 12:15 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file
+ * register access.
+ * 16:18 18:20 udma_cycle_time. Clock cycles for UDMA xfer.
+ * - 21 CLK frequency: 0=ATA clock, 1=dual ATA clock.
+ * 19:21 22:24 pre_high_time. Time to initialize the 1st cycle for PIO and
+ * MW DMA xfer.
+ * 22:24 25:27 cmd_pre_high_time. Time to initialize the 1st PIO cycle for
+ * task file register access.
+ * 28 28 UDMA enable.
+ * 29 29 DMA enable.
+ * 30 30 PIO MST enable. If set, the chip is in bus master mode during
+ * PIO xfer.
+ * 31 31 FIFO enable.
+ */
+
+static u32 forty_base_hpt36x[] = {
+ /* XFER_UDMA_6 */ 0x900fd943,
+ /* XFER_UDMA_5 */ 0x900fd943,
+ /* XFER_UDMA_4 */ 0x900fd943,
+ /* XFER_UDMA_3 */ 0x900ad943,
+ /* XFER_UDMA_2 */ 0x900bd943,
+ /* XFER_UDMA_1 */ 0x9008d943,
+ /* XFER_UDMA_0 */ 0x9008d943,
+
+ /* XFER_MW_DMA_2 */ 0xa008d943,
+ /* XFER_MW_DMA_1 */ 0xa010d955,
+ /* XFER_MW_DMA_0 */ 0xa010d9fc,
+
+ /* XFER_PIO_4 */ 0xc008d963,
+ /* XFER_PIO_3 */ 0xc010d974,
+ /* XFER_PIO_2 */ 0xc010d997,
+ /* XFER_PIO_1 */ 0xc010d9c7,
+ /* XFER_PIO_0 */ 0xc018d9d9
+};
+
+static u32 thirty_three_base_hpt36x[] = {
+ /* XFER_UDMA_6 */ 0x90c9a731,
+ /* XFER_UDMA_5 */ 0x90c9a731,
+ /* XFER_UDMA_4 */ 0x90c9a731,
+ /* XFER_UDMA_3 */ 0x90cfa731,
+ /* XFER_UDMA_2 */ 0x90caa731,
+ /* XFER_UDMA_1 */ 0x90cba731,
+ /* XFER_UDMA_0 */ 0x90c8a731,
+
+ /* XFER_MW_DMA_2 */ 0xa0c8a731,
+ /* XFER_MW_DMA_1 */ 0xa0c8a732, /* 0xa0c8a733 */
+ /* XFER_MW_DMA_0 */ 0xa0c8a797,
+
+ /* XFER_PIO_4 */ 0xc0c8a731,
+ /* XFER_PIO_3 */ 0xc0c8a742,
+ /* XFER_PIO_2 */ 0xc0d0a753,
+ /* XFER_PIO_1 */ 0xc0d0a7a3, /* 0xc0d0a793 */
+ /* XFER_PIO_0 */ 0xc0d0a7aa /* 0xc0d0a7a7 */
+};
+
+static u32 twenty_five_base_hpt36x[] = {
+ /* XFER_UDMA_6 */ 0x90c98521,
+ /* XFER_UDMA_5 */ 0x90c98521,
+ /* XFER_UDMA_4 */ 0x90c98521,
+ /* XFER_UDMA_3 */ 0x90cf8521,
+ /* XFER_UDMA_2 */ 0x90cf8521,
+ /* XFER_UDMA_1 */ 0x90cb8521,
+ /* XFER_UDMA_0 */ 0x90cb8521,
+
+ /* XFER_MW_DMA_2 */ 0xa0ca8521,
+ /* XFER_MW_DMA_1 */ 0xa0ca8532,
+ /* XFER_MW_DMA_0 */ 0xa0ca8575,
+
+ /* XFER_PIO_4 */ 0xc0ca8521,
+ /* XFER_PIO_3 */ 0xc0ca8532,
+ /* XFER_PIO_2 */ 0xc0ca8542,
+ /* XFER_PIO_1 */ 0xc0d08572,
+ /* XFER_PIO_0 */ 0xc0d08585
+};
+
+#if 0
+/* These are the timing tables from the HighPoint open source drivers... */
+static u32 thirty_three_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */
+ /* XFER_UDMA_5 */ 0x12446231,
+ /* XFER_UDMA_4 */ 0x12446231,
+ /* XFER_UDMA_3 */ 0x126c6231,
+ /* XFER_UDMA_2 */ 0x12486231,
+ /* XFER_UDMA_1 */ 0x124c6233,
+ /* XFER_UDMA_0 */ 0x12506297,
+
+ /* XFER_MW_DMA_2 */ 0x22406c31,
+ /* XFER_MW_DMA_1 */ 0x22406c33,
+ /* XFER_MW_DMA_0 */ 0x22406c97,
+
+ /* XFER_PIO_4 */ 0x06414e31,
+ /* XFER_PIO_3 */ 0x06414e42,
+ /* XFER_PIO_2 */ 0x06414e53,
+ /* XFER_PIO_1 */ 0x06814e93,
+ /* XFER_PIO_0 */ 0x06814ea7
+};
+
+static u32 fifty_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x12848242,
+ /* XFER_UDMA_5 */ 0x12848242,
+ /* XFER_UDMA_4 */ 0x12ac8242,
+ /* XFER_UDMA_3 */ 0x128c8242,
+ /* XFER_UDMA_2 */ 0x120c8242,
+ /* XFER_UDMA_1 */ 0x12148254,
+ /* XFER_UDMA_0 */ 0x121882ea,
+
+ /* XFER_MW_DMA_2 */ 0x22808242,
+ /* XFER_MW_DMA_1 */ 0x22808254,
+ /* XFER_MW_DMA_0 */ 0x228082ea,
+
+ /* XFER_PIO_4 */ 0x0a81f442,
+ /* XFER_PIO_3 */ 0x0a81f443,
+ /* XFER_PIO_2 */ 0x0a81f454,
+ /* XFER_PIO_1 */ 0x0ac1f465,
+ /* XFER_PIO_0 */ 0x0ac1f48a
+};
+
+static u32 sixty_six_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x1c869c62,
+ /* XFER_UDMA_5 */ 0x1cae9c62, /* 0x1c8a9c62 */
+ /* XFER_UDMA_4 */ 0x1c8a9c62,
+ /* XFER_UDMA_3 */ 0x1c8e9c62,
+ /* XFER_UDMA_2 */ 0x1c929c62,
+ /* XFER_UDMA_1 */ 0x1c9a9c62,
+ /* XFER_UDMA_0 */ 0x1c829c62,
+
+ /* XFER_MW_DMA_2 */ 0x2c829c62,
+ /* XFER_MW_DMA_1 */ 0x2c829c66,
+ /* XFER_MW_DMA_0 */ 0x2c829d2e,
+
+ /* XFER_PIO_4 */ 0x0c829c62,
+ /* XFER_PIO_3 */ 0x0c829c84,
+ /* XFER_PIO_2 */ 0x0c829ca6,
+ /* XFER_PIO_1 */ 0x0d029d26,
+ /* XFER_PIO_0 */ 0x0d029d5e
+};
+#else
+/*
+ * The following are the new timing tables with PIO mode data/taskfile transfer
+ * overclocking fixed...
+ */
+
+/* This table is taken from the HPT370 data manual rev. 1.02 */
+static u32 thirty_three_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x16455031, /* 0x16655031 ?? */
+ /* XFER_UDMA_5 */ 0x16455031,
+ /* XFER_UDMA_4 */ 0x16455031,
+ /* XFER_UDMA_3 */ 0x166d5031,
+ /* XFER_UDMA_2 */ 0x16495031,
+ /* XFER_UDMA_1 */ 0x164d5033,
+ /* XFER_UDMA_0 */ 0x16515097,
+
+ /* XFER_MW_DMA_2 */ 0x26515031,
+ /* XFER_MW_DMA_1 */ 0x26515033,
+ /* XFER_MW_DMA_0 */ 0x26515097,
+
+ /* XFER_PIO_4 */ 0x06515021,
+ /* XFER_PIO_3 */ 0x06515022,
+ /* XFER_PIO_2 */ 0x06515033,
+ /* XFER_PIO_1 */ 0x06915065,
+ /* XFER_PIO_0 */ 0x06d1508a
+};
+
+static u32 fifty_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x1a861842,
+ /* XFER_UDMA_5 */ 0x1a861842,
+ /* XFER_UDMA_4 */ 0x1aae1842,
+ /* XFER_UDMA_3 */ 0x1a8e1842,
+ /* XFER_UDMA_2 */ 0x1a0e1842,
+ /* XFER_UDMA_1 */ 0x1a161854,
+ /* XFER_UDMA_0 */ 0x1a1a18ea,
+
+ /* XFER_MW_DMA_2 */ 0x2a821842,
+ /* XFER_MW_DMA_1 */ 0x2a821854,
+ /* XFER_MW_DMA_0 */ 0x2a8218ea,
+
+ /* XFER_PIO_4 */ 0x0a821842,
+ /* XFER_PIO_3 */ 0x0a821843,
+ /* XFER_PIO_2 */ 0x0a821855,
+ /* XFER_PIO_1 */ 0x0ac218a8,
+ /* XFER_PIO_0 */ 0x0b02190c
+};
+
+static u32 sixty_six_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x1c86fe62,
+ /* XFER_UDMA_5 */ 0x1caefe62, /* 0x1c8afe62 */
+ /* XFER_UDMA_4 */ 0x1c8afe62,
+ /* XFER_UDMA_3 */ 0x1c8efe62,
+ /* XFER_UDMA_2 */ 0x1c92fe62,
+ /* XFER_UDMA_1 */ 0x1c9afe62,
+ /* XFER_UDMA_0 */ 0x1c82fe62,
+
+ /* XFER_MW_DMA_2 */ 0x2c82fe62,
+ /* XFER_MW_DMA_1 */ 0x2c82fe66,
+ /* XFER_MW_DMA_0 */ 0x2c82ff2e,
+
+ /* XFER_PIO_4 */ 0x0c82fe62,
+ /* XFER_PIO_3 */ 0x0c82fe84,
+ /* XFER_PIO_2 */ 0x0c82fea6,
+ /* XFER_PIO_1 */ 0x0d02ff26,
+ /* XFER_PIO_0 */ 0x0d42ff7f
+};
+#endif
+
+#define HPT366_DEBUG_DRIVE_INFO 0
+#define HPT371_ALLOW_ATA133_6 1
+#define HPT302_ALLOW_ATA133_6 1
+#define HPT372_ALLOW_ATA133_6 1
+#define HPT370_ALLOW_ATA100_5 0
+#define HPT366_ALLOW_ATA66_4 1
+#define HPT366_ALLOW_ATA66_3 1
+#define HPT366_MAX_DEVS 8
+
+/* Supported ATA clock frequencies */
+enum ata_clock {
+ ATA_CLOCK_25MHZ,
+ ATA_CLOCK_33MHZ,
+ ATA_CLOCK_40MHZ,
+ ATA_CLOCK_50MHZ,
+ ATA_CLOCK_66MHZ,
+ NUM_ATA_CLOCKS
+};
+
+struct hpt_timings {
+ u32 pio_mask;
+ u32 dma_mask;
+ u32 ultra_mask;
+ u32 *clock_table[NUM_ATA_CLOCKS];
+};
+
+/*
+ * Hold all the HighPoint chip information in one place.
+ */
+
+struct hpt_info {
+ char *chip_name; /* Chip name */
+ u8 chip_type; /* Chip type */
+ u8 udma_mask; /* Allowed UltraDMA modes mask. */
+ u8 dpll_clk; /* DPLL clock in MHz */
+ u8 pci_clk; /* PCI clock in MHz */
+ struct hpt_timings *timings; /* Chipset timing data */
+ u8 clock; /* ATA clock selected */
+};
+
+/* Supported HighPoint chips */
+enum {
+ HPT36x,
+ HPT370,
+ HPT370A,
+ HPT374,
+ HPT372,
+ HPT372A,
+ HPT302,
+ HPT371,
+ HPT372N,
+ HPT302N,
+ HPT371N
+};
+
+static struct hpt_timings hpt36x_timings = {
+ .pio_mask = 0xc1f8ffff,
+ .dma_mask = 0x303800ff,
+ .ultra_mask = 0x30070000,
+ .clock_table = {
+ [ATA_CLOCK_25MHZ] = twenty_five_base_hpt36x,
+ [ATA_CLOCK_33MHZ] = thirty_three_base_hpt36x,
+ [ATA_CLOCK_40MHZ] = forty_base_hpt36x,
+ [ATA_CLOCK_50MHZ] = NULL,
+ [ATA_CLOCK_66MHZ] = NULL
+ }
+};
+
+static struct hpt_timings hpt37x_timings = {
+ .pio_mask = 0xcfc3ffff,
+ .dma_mask = 0x31c001ff,
+ .ultra_mask = 0x303c0000,
+ .clock_table = {
+ [ATA_CLOCK_25MHZ] = NULL,
+ [ATA_CLOCK_33MHZ] = thirty_three_base_hpt37x,
+ [ATA_CLOCK_40MHZ] = NULL,
+ [ATA_CLOCK_50MHZ] = fifty_base_hpt37x,
+ [ATA_CLOCK_66MHZ] = sixty_six_base_hpt37x
+ }
+};
+
+static const struct hpt_info hpt36x __devinitdata = {
+ .chip_name = "HPT36x",
+ .chip_type = HPT36x,
+ .udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2,
+ .dpll_clk = 0, /* no DPLL */
+ .timings = &hpt36x_timings
+};
+
+static const struct hpt_info hpt370 __devinitdata = {
+ .chip_name = "HPT370",
+ .chip_type = HPT370,
+ .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
+ .dpll_clk = 48,
+ .timings = &hpt37x_timings
+};
+
+static const struct hpt_info hpt370a __devinitdata = {
+ .chip_name = "HPT370A",
+ .chip_type = HPT370A,
+ .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
+ .dpll_clk = 48,
+ .timings = &hpt37x_timings
+};
+
+static const struct hpt_info hpt374 __devinitdata = {
+ .chip_name = "HPT374",
+ .chip_type = HPT374,
+ .udma_mask = ATA_UDMA5,
+ .dpll_clk = 48,
+ .timings = &hpt37x_timings
+};
+
+static const struct hpt_info hpt372 __devinitdata = {
+ .chip_name = "HPT372",
+ .chip_type = HPT372,
+ .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
+ .dpll_clk = 55,
+ .timings = &hpt37x_timings
+};
+
+static const struct hpt_info hpt372a __devinitdata = {
+ .chip_name = "HPT372A",
+ .chip_type = HPT372A,
+ .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
+ .dpll_clk = 66,
+ .timings = &hpt37x_timings
+};
+
+static const struct hpt_info hpt302 __devinitdata = {
+ .chip_name = "HPT302",
+ .chip_type = HPT302,
+ .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
+ .dpll_clk = 66,
+ .timings = &hpt37x_timings
+};
+
+static const struct hpt_info hpt371 __devinitdata = {
+ .chip_name = "HPT371",
+ .chip_type = HPT371,
+ .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
+ .dpll_clk = 66,
+ .timings = &hpt37x_timings
+};
+
+static const struct hpt_info hpt372n __devinitdata = {
+ .chip_name = "HPT372N",
+ .chip_type = HPT372N,
+ .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
+ .dpll_clk = 77,
+ .timings = &hpt37x_timings
+};
+
+static const struct hpt_info hpt302n __devinitdata = {
+ .chip_name = "HPT302N",
+ .chip_type = HPT302N,
+ .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
+ .dpll_clk = 77,
+ .timings = &hpt37x_timings
+};
+
+static const struct hpt_info hpt371n __devinitdata = {
+ .chip_name = "HPT371N",
+ .chip_type = HPT371N,
+ .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
+ .dpll_clk = 77,
+ .timings = &hpt37x_timings
+};
+
+static int check_in_drive_list(ide_drive_t *drive, const char **list)
+{
+ char *m = (char *)&drive->id[ATA_ID_PROD];
+
+ while (*list)
+ if (!strcmp(*list++, m))
+ return 1;
+ return 0;
+}
+
+static struct hpt_info *hpt3xx_get_info(struct device *dev)
+{
+ struct ide_host *host = dev_get_drvdata(dev);
+ struct hpt_info *info = (struct hpt_info *)host->host_priv;
+
+ return dev == host->dev[1] ? info + 1 : info;
+}
+
+/*
+ * The Marvell bridge chips used on the HighPoint SATA cards do not seem
+ * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
+ */
+
+static u8 hpt3xx_udma_filter(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
+ u8 mask = hwif->ultra_mask;
+
+ switch (info->chip_type) {
+ case HPT36x:
+ if (!HPT366_ALLOW_ATA66_4 ||
+ check_in_drive_list(drive, bad_ata66_4))
+ mask = ATA_UDMA3;
+
+ if (!HPT366_ALLOW_ATA66_3 ||
+ check_in_drive_list(drive, bad_ata66_3))
+ mask = ATA_UDMA2;
+ break;
+ case HPT370:
+ if (!HPT370_ALLOW_ATA100_5 ||
+ check_in_drive_list(drive, bad_ata100_5))
+ mask = ATA_UDMA4;
+ break;
+ case HPT370A:
+ if (!HPT370_ALLOW_ATA100_5 ||
+ check_in_drive_list(drive, bad_ata100_5))
+ return ATA_UDMA4;
+ case HPT372 :
+ case HPT372A:
+ case HPT372N:
+ case HPT374 :
+ if (ata_id_is_sata(drive->id))
+ mask &= ~0x0e;
+ /* Fall thru */
+ default:
+ return mask;
+ }
+
+ return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask;
+}
+
+static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
+
+ switch (info->chip_type) {
+ case HPT372 :
+ case HPT372A:
+ case HPT372N:
+ case HPT374 :
+ if (ata_id_is_sata(drive->id))
+ return 0x00;
+ /* Fall thru */
+ default:
+ return 0x07;
+ }
+}
+
+static u32 get_speed_setting(u8 speed, struct hpt_info *info)
+{
+ int i;
+
+ /*
+ * Lookup the transfer mode table to get the index into
+ * the timing table.
+ *
+ * NOTE: For XFER_PIO_SLOW, PIO mode 0 timings will be used.
+ */
+ for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++)
+ if (xfer_speeds[i] == speed)
+ break;
+
+ return info->timings->clock_table[info->clock][i];
+}
+
+static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
+ struct hpt_timings *t = info->timings;
+ u8 itr_addr = 0x40 + (drive->dn * 4);
+ u32 old_itr = 0;
+ u32 new_itr = get_speed_setting(speed, info);
+ u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask :
+ (speed < XFER_UDMA_0 ? t->dma_mask :
+ t->ultra_mask);
+
+ pci_read_config_dword(dev, itr_addr, &old_itr);
+ new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask);
+ /*
+ * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well)
+ * to avoid problems handling I/O errors later
+ */
+ new_itr &= ~0xc0000000;
+
+ pci_write_config_dword(dev, itr_addr, new_itr);
+}
+
+static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+ hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
+}
+
+static void hpt3xx_quirkproc(ide_drive_t *drive)
+{
+ char *m = (char *)&drive->id[ATA_ID_PROD];
+ const char **list = quirk_drives;
+
+ while (*list)
+ if (strstr(m, *list++)) {
+ drive->quirk_list = 1;
+ return;
+ }
+
+ drive->quirk_list = 0;
+}
+
+static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
+
+ if (drive->quirk_list == 0)
+ return;
+
+ if (info->chip_type >= HPT370) {
+ u8 scr1 = 0;
+
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ if (((scr1 & 0x10) >> 4) != mask) {
+ if (mask)
+ scr1 |= 0x10;
+ else
+ scr1 &= ~0x10;
+ pci_write_config_byte(dev, 0x5a, scr1);
+ }
+ } else if (mask)
+ disable_irq(hwif->irq);
+ else
+ enable_irq(hwif->irq);
+}
+
+/*
+ * This is specific to the HPT366 UDMA chipset
+ * by HighPoint|Triones Technologies, Inc.
+ */
+static void hpt366_dma_lost_irq(ide_drive_t *drive)
+{
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+ u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
+
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ pci_read_config_byte(dev, 0x52, &mcr3);
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n",
+ drive->name, __func__, mcr1, mcr3, scr1);
+ if (scr1 & 0x10)
+ pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
+ ide_dma_lost_irq(drive);
+}
+
+static void hpt370_clear_engine(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
+ pci_write_config_byte(dev, hwif->select_data, 0x37);
+ udelay(10);
+}
+
+static void hpt370_irq_timeout(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u16 bfifo = 0;
+ u8 dma_cmd;
+
+ pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
+ printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
+
+ /* get DMA command mode */
+ dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
+ /* stop DMA */
+ outb(dma_cmd & ~0x1, hwif->dma_base + ATA_DMA_CMD);
+ hpt370_clear_engine(drive);
+}
+
+static void hpt370_dma_start(ide_drive_t *drive)
+{
+#ifdef HPT_RESET_STATE_ENGINE
+ hpt370_clear_engine(drive);
+#endif
+ ide_dma_start(drive);
+}
+
+static int hpt370_dma_end(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
+
+ if (dma_stat & 0x01) {
+ /* wait a little */
+ udelay(20);
+ dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
+ if (dma_stat & 0x01)
+ hpt370_irq_timeout(drive);
+ }
+ return ide_dma_end(drive);
+}
+
+static void hpt370_dma_timeout(ide_drive_t *drive)
+{
+ hpt370_irq_timeout(drive);
+ ide_dma_timeout(drive);
+}
+
+/* returns 1 if DMA IRQ issued, 0 otherwise */
+static int hpt374_dma_test_irq(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u16 bfifo = 0;
+ u8 dma_stat;
+
+ pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
+ if (bfifo & 0x1FF) {
+// printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
+ return 0;
+ }
+
+ dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
+ /* return 1 if INTR asserted */
+ if (dma_stat & 4)
+ return 1;
+
+ return 0;
+}
+
+static int hpt374_dma_end(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u8 mcr = 0, mcr_addr = hwif->select_data;
+ u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01;
+
+ pci_read_config_byte(dev, 0x6a, &bwsr);
+ pci_read_config_byte(dev, mcr_addr, &mcr);
+ if (bwsr & mask)
+ pci_write_config_byte(dev, mcr_addr, mcr | 0x30);
+ return ide_dma_end(drive);
+}
+
+/**
+ * hpt3xxn_set_clock - perform clock switching dance
+ * @hwif: hwif to switch
+ * @mode: clocking mode (0x21 for write, 0x23 otherwise)
+ *
+ * Switch the DPLL clock on the HPT3xxN devices. This is a right mess.
+ */
+
+static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
+{
+ unsigned long base = hwif->extra_base;
+ u8 scr2 = inb(base + 0x6b);
+
+ if ((scr2 & 0x7f) == mode)
+ return;
+
+ /* Tristate the bus */
+ outb(0x80, base + 0x63);
+ outb(0x80, base + 0x67);
+
+ /* Switch clock and reset channels */
+ outb(mode, base + 0x6b);
+ outb(0xc0, base + 0x69);
+
+ /*
+ * Reset the state machines.
+ * NOTE: avoid accidentally enabling the disabled channels.
+ */
+ outb(inb(base + 0x60) | 0x32, base + 0x60);
+ outb(inb(base + 0x64) | 0x32, base + 0x64);
+
+ /* Complete reset */
+ outb(0x00, base + 0x69);
+
+ /* Reconnect channels to bus */
+ outb(0x00, base + 0x63);
+ outb(0x00, base + 0x67);
+}
+
+/**
+ * hpt3xxn_rw_disk - prepare for I/O
+ * @drive: drive for command
+ * @rq: block request structure
+ *
+ * This is called when a disk I/O is issued to HPT3xxN.
+ * We need it because of the clock switching.
+ */
+
+static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
+{
+ hpt3xxn_set_clock(HWIF(drive), rq_data_dir(rq) ? 0x23 : 0x21);
+}
+
+/**
+ * hpt37x_calibrate_dpll - calibrate the DPLL
+ * @dev: PCI device
+ *
+ * Perform a calibration cycle on the DPLL.
+ * Returns 1 if this succeeds
+ */
+static int hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high)
+{
+ u32 dpll = (f_high << 16) | f_low | 0x100;
+ u8 scr2;
+ int i;
+
+ pci_write_config_dword(dev, 0x5c, dpll);
+
+ /* Wait for oscillator ready */
+ for(i = 0; i < 0x5000; ++i) {
+ udelay(50);
+ pci_read_config_byte(dev, 0x5b, &scr2);
+ if (scr2 & 0x80)
+ break;
+ }
+ /* See if it stays ready (we'll just bail out if it's not yet) */
+ for(i = 0; i < 0x1000; ++i) {
+ pci_read_config_byte(dev, 0x5b, &scr2);
+ /* DPLL destabilized? */
+ if(!(scr2 & 0x80))
+ return 0;
+ }
+ /* Turn off tuning, we have the DPLL set */
+ pci_read_config_dword (dev, 0x5c, &dpll);
+ pci_write_config_dword(dev, 0x5c, (dpll & ~0x100));
+ return 1;
+}
+
+static void hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
+ u8 chip_type = info->chip_type;
+ u8 new_mcr, old_mcr = 0;
+
+ /*
+ * Disable the "fast interrupt" prediction. Don't hold off
+ * on interrupts. (== 0x01 despite what the docs say)
+ */
+ pci_read_config_byte(dev, mcr_addr + 1, &old_mcr);
+
+ if (chip_type >= HPT374)
+ new_mcr = old_mcr & ~0x07;
+ else if (chip_type >= HPT370) {
+ new_mcr = old_mcr;
+ new_mcr &= ~0x02;
+#ifdef HPT_DELAY_INTERRUPT
+ new_mcr &= ~0x01;
+#else
+ new_mcr |= 0x01;
+#endif
+ } else /* HPT366 and HPT368 */
+ new_mcr = old_mcr & ~0x80;
+
+ if (new_mcr != old_mcr)
+ pci_write_config_byte(dev, mcr_addr + 1, new_mcr);
+}
+
+static unsigned int init_chipset_hpt366(struct pci_dev *dev)
+{
+ unsigned long io_base = pci_resource_start(dev, 4);
+ struct hpt_info *info = hpt3xx_get_info(&dev->dev);
+ const char *name = DRV_NAME;
+ u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */
+ u8 chip_type;
+ enum ata_clock clock;
+
+ chip_type = info->chip_type;
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
+ pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
+ pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
+
+ /*
+ * First, try to estimate the PCI clock frequency...
+ */
+ if (chip_type >= HPT370) {
+ u8 scr1 = 0;
+ u16 f_cnt = 0;
+ u32 temp = 0;
+
+ /* Interrupt force enable. */
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ if (scr1 & 0x10)
+ pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
+
+ /*
+ * HighPoint does this for HPT372A.
+ * NOTE: This register is only writeable via I/O space.
+ */
+ if (chip_type == HPT372A)
+ outb(0x0e, io_base + 0x9c);
+
+ /*
+ * Default to PCI clock. Make sure MA15/16 are set to output
+ * to prevent drives having problems with 40-pin cables.
+ */
+ pci_write_config_byte(dev, 0x5b, 0x23);
+
+ /*
+ * We'll have to read f_CNT value in order to determine
+ * the PCI clock frequency according to the following ratio:
+ *
+ * f_CNT = Fpci * 192 / Fdpll
+ *
+ * First try reading the register in which the HighPoint BIOS
+ * saves f_CNT value before reprogramming the DPLL from its
+ * default setting (which differs for the various chips).
+ *
+ * NOTE: This register is only accessible via I/O space;
+ * HPT374 BIOS only saves it for the function 0, so we have to
+ * always read it from there -- no need to check the result of
+ * pci_get_slot() for the function 0 as the whole device has
+ * been already "pinned" (via function 1) in init_setup_hpt374()
+ */
+ if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
+ struct pci_dev *dev1 = pci_get_slot(dev->bus,
+ dev->devfn - 1);
+ unsigned long io_base = pci_resource_start(dev1, 4);
+
+ temp = inl(io_base + 0x90);
+ pci_dev_put(dev1);
+ } else
+ temp = inl(io_base + 0x90);
+
+ /*
+ * In case the signature check fails, we'll have to
+ * resort to reading the f_CNT register itself in hopes
+ * that nobody has touched the DPLL yet...
+ */
+ if ((temp & 0xFFFFF000) != 0xABCDE000) {
+ int i;
+
+ printk(KERN_WARNING "%s %s: no clock data saved by "
+ "BIOS\n", name, pci_name(dev));
+
+ /* Calculate the average value of f_CNT. */
+ for (temp = i = 0; i < 128; i++) {
+ pci_read_config_word(dev, 0x78, &f_cnt);
+ temp += f_cnt & 0x1ff;
+ mdelay(1);
+ }
+ f_cnt = temp / 128;
+ } else
+ f_cnt = temp & 0x1ff;
+
+ dpll_clk = info->dpll_clk;
+ pci_clk = (f_cnt * dpll_clk) / 192;
+
+ /* Clamp PCI clock to bands. */
+ if (pci_clk < 40)
+ pci_clk = 33;
+ else if(pci_clk < 45)
+ pci_clk = 40;
+ else if(pci_clk < 55)
+ pci_clk = 50;
+ else
+ pci_clk = 66;
+
+ printk(KERN_INFO "%s %s: DPLL base: %d MHz, f_CNT: %d, "
+ "assuming %d MHz PCI\n", name, pci_name(dev),
+ dpll_clk, f_cnt, pci_clk);
+ } else {
+ u32 itr1 = 0;
+
+ pci_read_config_dword(dev, 0x40, &itr1);
+
+ /* Detect PCI clock by looking at cmd_high_time. */
+ switch((itr1 >> 8) & 0x07) {
+ case 0x09:
+ pci_clk = 40;
+ break;
+ case 0x05:
+ pci_clk = 25;
+ break;
+ case 0x07:
+ default:
+ pci_clk = 33;
+ break;
+ }
+ }
+
+ /* Let's assume we'll use PCI clock for the ATA clock... */
+ switch (pci_clk) {
+ case 25:
+ clock = ATA_CLOCK_25MHZ;
+ break;
+ case 33:
+ default:
+ clock = ATA_CLOCK_33MHZ;
+ break;
+ case 40:
+ clock = ATA_CLOCK_40MHZ;
+ break;
+ case 50:
+ clock = ATA_CLOCK_50MHZ;
+ break;
+ case 66:
+ clock = ATA_CLOCK_66MHZ;
+ break;
+ }
+
+ /*
+ * Only try the DPLL if we don't have a table for the PCI clock that
+ * we are running at for HPT370/A, always use it for anything newer...
+ *
+ * NOTE: Using the internal DPLL results in slow reads on 33 MHz PCI.
+ * We also don't like using the DPLL because this causes glitches
+ * on PRST-/SRST- when the state engine gets reset...
+ */
+ if (chip_type >= HPT374 || info->timings->clock_table[clock] == NULL) {
+ u16 f_low, delta = pci_clk < 50 ? 2 : 4;
+ int adjust;
+
+ /*
+ * Select 66 MHz DPLL clock only if UltraATA/133 mode is
+ * supported/enabled, use 50 MHz DPLL clock otherwise...
+ */
+ if (info->udma_mask == ATA_UDMA6) {
+ dpll_clk = 66;
+ clock = ATA_CLOCK_66MHZ;
+ } else if (dpll_clk) { /* HPT36x chips don't have DPLL */
+ dpll_clk = 50;
+ clock = ATA_CLOCK_50MHZ;
+ }
+
+ if (info->timings->clock_table[clock] == NULL) {
+ printk(KERN_ERR "%s %s: unknown bus timing!\n",
+ name, pci_name(dev));
+ return -EIO;
+ }
+
+ /* Select the DPLL clock. */
+ pci_write_config_byte(dev, 0x5b, 0x21);
+
+ /*
+ * Adjust the DPLL based upon PCI clock, enable it,
+ * and wait for stabilization...
+ */
+ f_low = (pci_clk * 48) / dpll_clk;
+
+ for (adjust = 0; adjust < 8; adjust++) {
+ if(hpt37x_calibrate_dpll(dev, f_low, f_low + delta))
+ break;
+
+ /*
+ * See if it'll settle at a fractionally different clock
+ */
+ if (adjust & 1)
+ f_low -= adjust >> 1;
+ else
+ f_low += adjust >> 1;
+ }
+ if (adjust == 8) {
+ printk(KERN_ERR "%s %s: DPLL did not stabilize!\n",
+ name, pci_name(dev));
+ return -EIO;
+ }
+
+ printk(KERN_INFO "%s %s: using %d MHz DPLL clock\n",
+ name, pci_name(dev), dpll_clk);
+ } else {
+ /* Mark the fact that we're not using the DPLL. */
+ dpll_clk = 0;
+
+ printk(KERN_INFO "%s %s: using %d MHz PCI clock\n",
+ name, pci_name(dev), pci_clk);
+ }
+
+ /* Store the clock frequencies. */
+ info->dpll_clk = dpll_clk;
+ info->pci_clk = pci_clk;
+ info->clock = clock;
+
+ if (chip_type >= HPT370) {
+ u8 mcr1, mcr4;
+
+ /*
+ * Reset the state engines.
+ * NOTE: Avoid accidentally enabling the disabled channels.
+ */
+ pci_read_config_byte (dev, 0x50, &mcr1);
+ pci_read_config_byte (dev, 0x54, &mcr4);
+ pci_write_config_byte(dev, 0x50, (mcr1 | 0x32));
+ pci_write_config_byte(dev, 0x54, (mcr4 | 0x32));
+ udelay(100);
+ }
+
+ /*
+ * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
+ * the MISC. register to stretch the UltraDMA Tss timing.
+ * NOTE: This register is only writeable via I/O space.
+ */
+ if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)
+ outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c);
+
+ hpt3xx_disable_fast_irq(dev, 0x50);
+ hpt3xx_disable_fast_irq(dev, 0x54);
+
+ return dev->irq;
+}
+
+static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
+ u8 chip_type = info->chip_type;
+ u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
+
+ /*
+ * The HPT37x uses the CBLID pins as outputs for MA15/MA16
+ * address lines to access an external EEPROM. To read valid
+ * cable detect state the pins must be enabled as inputs.
+ */
+ if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
+ /*
+ * HPT374 PCI function 1
+ * - set bit 15 of reg 0x52 to enable TCBLID as input
+ * - set bit 15 of reg 0x56 to enable FCBLID as input
+ */
+ u8 mcr_addr = hwif->select_data + 2;
+ u16 mcr;
+
+ pci_read_config_word(dev, mcr_addr, &mcr);
+ pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
+ /* now read cable id register */
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ pci_write_config_word(dev, mcr_addr, mcr);
+ } else if (chip_type >= HPT370) {
+ /*
+ * HPT370/372 and 374 pcifn 0
+ * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
+ */
+ u8 scr2 = 0;
+
+ pci_read_config_byte(dev, 0x5b, &scr2);
+ pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
+ /* now read cable id register */
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ pci_write_config_byte(dev, 0x5b, scr2);
+ } else
+ pci_read_config_byte(dev, 0x5a, &scr1);
+
+ return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
+static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
+{
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
+ int serialize = HPT_SERIALIZE_IO;
+ u8 chip_type = info->chip_type;
+
+ /* Cache the channel's MISC. control registers' offset */
+ hwif->select_data = hwif->channel ? 0x54 : 0x50;
+
+ /*
+ * HPT3xxN chips have some complications:
+ *
+ * - on 33 MHz PCI we must clock switch
+ * - on 66 MHz PCI we must NOT use the PCI clock
+ */
+ if (chip_type >= HPT372N && info->dpll_clk && info->pci_clk < 66) {
+ /*
+ * Clock is shared between the channels,
+ * so we'll have to serialize them... :-(
+ */
+ serialize = 1;
+ hwif->rw_disk = &hpt3xxn_rw_disk;
+ }
+
+ /* Serialize access to this device if needed */
+ if (serialize && hwif->mate)
+ hwif->serialized = hwif->mate->serialized = 1;
+}
+
+static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
+ const struct ide_port_info *d)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long flags, base = ide_pci_dma_base(hwif, d);
+ u8 dma_old, dma_new, masterdma = 0, slavedma = 0;
+
+ if (base == 0)
+ return -1;
+
+ hwif->dma_base = base;
+
+ if (ide_pci_check_simplex(hwif, d) < 0)
+ return -1;
+
+ if (ide_pci_set_master(dev, d->name) < 0)
+ return -1;
+
+ dma_old = inb(base + 2);
+
+ local_irq_save(flags);
+
+ dma_new = dma_old;
+ pci_read_config_byte(dev, hwif->channel ? 0x4b : 0x43, &masterdma);
+ pci_read_config_byte(dev, hwif->channel ? 0x4f : 0x47, &slavedma);
+
+ if (masterdma & 0x30) dma_new |= 0x20;
+ if ( slavedma & 0x30) dma_new |= 0x40;
+ if (dma_new != dma_old)
+ outb(dma_new, base + 2);
+
+ local_irq_restore(flags);
+
+ printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
+ hwif->name, base, base + 7);
+
+ hwif->extra_base = base + (hwif->channel ? 8 : 16);
+
+ if (ide_allocate_dma_engine(hwif))
+ return -1;
+
+ hwif->dma_ops = &sff_dma_ops;
+
+ return 0;
+}
+
+static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
+{
+ if (dev2->irq != dev->irq) {
+ /* FIXME: we need a core pci_set_interrupt() */
+ dev2->irq = dev->irq;
+ printk(KERN_INFO DRV_NAME " %s: PCI config space interrupt "
+ "fixed\n", pci_name(dev2));
+ }
+}
+
+static void __devinit hpt371_init(struct pci_dev *dev)
+{
+ u8 mcr1 = 0;
+
+ /*
+ * HPT371 chips physically have only one channel, the secondary one,
+ * but the primary channel registers do exist! Go figure...
+ * So, we manually disable the non-existing channel here
+ * (if the BIOS hasn't done this already).
+ */
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ if (mcr1 & 0x04)
+ pci_write_config_byte(dev, 0x50, mcr1 & ~0x04);
+}
+
+static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
+{
+ u8 mcr1 = 0, pin1 = 0, pin2 = 0;
+
+ /*
+ * Now we'll have to force both channels enabled if
+ * at least one of them has been enabled by BIOS...
+ */
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ if (mcr1 & 0x30)
+ pci_write_config_byte(dev, 0x50, mcr1 | 0x30);
+
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
+ pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
+
+ if (pin1 != pin2 && dev->irq == dev2->irq) {
+ printk(KERN_INFO DRV_NAME " %s: onboard version of chipset, "
+ "pin1=%d pin2=%d\n", pci_name(dev), pin1, pin2);
+ return 1;
+ }
+
+ return 0;
+}
+
+#define IDE_HFLAGS_HPT3XX \
+ (IDE_HFLAG_NO_ATAPI_DMA | \
+ IDE_HFLAG_OFF_BOARD)
+
+static const struct ide_port_ops hpt3xx_port_ops = {
+ .set_pio_mode = hpt3xx_set_pio_mode,
+ .set_dma_mode = hpt3xx_set_mode,
+ .quirkproc = hpt3xx_quirkproc,
+ .maskproc = hpt3xx_maskproc,
+ .mdma_filter = hpt3xx_mdma_filter,
+ .udma_filter = hpt3xx_udma_filter,
+ .cable_detect = hpt3xx_cable_detect,
+};
+
+static const struct ide_dma_ops hpt37x_dma_ops = {
+ .dma_host_set = ide_dma_host_set,
+ .dma_setup = ide_dma_setup,
+ .dma_exec_cmd = ide_dma_exec_cmd,
+ .dma_start = ide_dma_start,
+ .dma_end = hpt374_dma_end,
+ .dma_test_irq = hpt374_dma_test_irq,
+ .dma_lost_irq = ide_dma_lost_irq,
+ .dma_timeout = ide_dma_timeout,
+};
+
+static const struct ide_dma_ops hpt370_dma_ops = {
+ .dma_host_set = ide_dma_host_set,
+ .dma_setup = ide_dma_setup,
+ .dma_exec_cmd = ide_dma_exec_cmd,
+ .dma_start = hpt370_dma_start,
+ .dma_end = hpt370_dma_end,
+ .dma_test_irq = ide_dma_test_irq,
+ .dma_lost_irq = ide_dma_lost_irq,
+ .dma_timeout = hpt370_dma_timeout,
+};
+
+static const struct ide_dma_ops hpt36x_dma_ops = {
+ .dma_host_set = ide_dma_host_set,
+ .dma_setup = ide_dma_setup,
+ .dma_exec_cmd = ide_dma_exec_cmd,
+ .dma_start = ide_dma_start,
+ .dma_end = ide_dma_end,
+ .dma_test_irq = ide_dma_test_irq,
+ .dma_lost_irq = hpt366_dma_lost_irq,
+ .dma_timeout = ide_dma_timeout,
+};
+
+static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
+ { /* 0: HPT36x */
+ .name = DRV_NAME,
+ .init_chipset = init_chipset_hpt366,
+ .init_hwif = init_hwif_hpt366,
+ .init_dma = init_dma_hpt366,
+ /*
+ * HPT36x chips have one channel per function and have
+ * both channel enable bits located differently and visible
+ * to both functions -- really stupid design decision... :-(
+ * Bit 4 is for the primary channel, bit 5 for the secondary.
+ */
+ .enablebits = {{0x50,0x10,0x10}, {0x54,0x04,0x04}},
+ .port_ops = &hpt3xx_port_ops,
+ .dma_ops = &hpt36x_dma_ops,
+ .host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ },
+ { /* 1: HPT3xx */
+ .name = DRV_NAME,
+ .init_chipset = init_chipset_hpt366,
+ .init_hwif = init_hwif_hpt366,
+ .init_dma = init_dma_hpt366,
+ .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
+ .port_ops = &hpt3xx_port_ops,
+ .dma_ops = &hpt37x_dma_ops,
+ .host_flags = IDE_HFLAGS_HPT3XX,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ }
+};
+
+/**
+ * hpt366_init_one - called when an HPT366 is found
+ * @dev: the hpt366 device
+ * @id: the matching pci id
+ *
+ * Called when the PCI registration layer (or the IDE initialization)
+ * finds a device matching our IDE device tables.
+ */
+static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ const struct hpt_info *info = NULL;
+ struct hpt_info *dyn_info;
+ struct pci_dev *dev2 = NULL;
+ struct ide_port_info d;
+ u8 idx = id->driver_data;
+ u8 rev = dev->revision;
+ int ret;
+
+ if ((idx == 0 || idx == 4) && (PCI_FUNC(dev->devfn) & 1))
+ return -ENODEV;
+
+ switch (idx) {
+ case 0:
+ if (rev < 3)
+ info = &hpt36x;
+ else {
+ switch (min_t(u8, rev, 6)) {
+ case 3: info = &hpt370; break;
+ case 4: info = &hpt370a; break;
+ case 5: info = &hpt372; break;
+ case 6: info = &hpt372n; break;
+ }
+ idx++;
+ }
+ break;
+ case 1:
+ info = (rev > 1) ? &hpt372n : &hpt372a;
+ break;
+ case 2:
+ info = (rev > 1) ? &hpt302n : &hpt302;
+ break;
+ case 3:
+ hpt371_init(dev);
+ info = (rev > 1) ? &hpt371n : &hpt371;
+ break;
+ case 4:
+ info = &hpt374;
+ break;
+ case 5:
+ info = &hpt372n;
+ break;
+ }
+
+ printk(KERN_INFO DRV_NAME ": %s chipset detected\n", info->chip_name);
+
+ d = hpt366_chipsets[min_t(u8, idx, 1)];
+
+ d.udma_mask = info->udma_mask;
+
+ /* fixup ->dma_ops for HPT370/HPT370A */
+ if (info == &hpt370 || info == &hpt370a)
+ d.dma_ops = &hpt370_dma_ops;
+
+ if (info == &hpt36x || info == &hpt374)
+ dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
+
+ dyn_info = kzalloc(sizeof(*dyn_info) * (dev2 ? 2 : 1), GFP_KERNEL);
+ if (dyn_info == NULL) {
+ printk(KERN_ERR "%s %s: out of memory!\n",
+ d.name, pci_name(dev));
+ pci_dev_put(dev2);
+ return -ENOMEM;
+ }
+
+ /*
+ * Copy everything from a static "template" structure
+ * to just allocated per-chip hpt_info structure.
+ */
+ memcpy(dyn_info, info, sizeof(*dyn_info));
+
+ if (dev2) {
+ memcpy(dyn_info + 1, info, sizeof(*dyn_info));
+
+ if (info == &hpt374)
+ hpt374_init(dev, dev2);
+ else {
+ if (hpt36x_init(dev, dev2))
+ d.host_flags &= ~IDE_HFLAG_NON_BOOTABLE;
+ }
+
+ ret = ide_pci_init_two(dev, dev2, &d, dyn_info);
+ if (ret < 0) {
+ pci_dev_put(dev2);
+ kfree(dyn_info);
+ }
+ return ret;
+ }
+
+ ret = ide_pci_init_one(dev, &d, dyn_info);
+ if (ret < 0)
+ kfree(dyn_info);
+
+ return ret;
+}
+
+static void __devexit hpt366_remove(struct pci_dev *dev)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct ide_info *info = host->host_priv;
+ struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
+
+ ide_pci_remove(dev);
+ pci_dev_put(dev2);
+ kfree(info);
+}
+
+static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
+ { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), 0 },
+ { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), 1 },
+ { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), 2 },
+ { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT371), 3 },
+ { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT374), 4 },
+ { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372N), 5 },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, hpt366_pci_tbl);
+
+static struct pci_driver hpt366_pci_driver = {
+ .name = "HPT366_IDE",
+ .id_table = hpt366_pci_tbl,
+ .probe = hpt366_init_one,
+ .remove = __devexit_p(hpt366_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
+};
+
+static int __init hpt366_ide_init(void)
+{
+ return ide_pci_register_driver(&hpt366_pci_driver);
+}
+
+static void __exit hpt366_ide_exit(void)
+{
+ pci_unregister_driver(&hpt366_pci_driver);
+}
+
+module_init(hpt366_ide_init);
+module_exit(hpt366_ide_exit);
+
+MODULE_AUTHOR("Andre Hedrick");
+MODULE_DESCRIPTION("PCI driver module for Highpoint HPT366 IDE");
+MODULE_LICENSE("GPL");