aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/ide-cs.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
commit2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch)
tree17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/ide-cs.c
parent2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff)
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/ide-cs.c')
-rw-r--r--drivers/ide/ide-cs.c472
1 files changed, 472 insertions, 0 deletions
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
new file mode 100644
index 00000000000..cb199c815b5
--- /dev/null
+++ b/drivers/ide/ide-cs.c
@@ -0,0 +1,472 @@
+/*======================================================================
+
+ A driver for PCMCIA IDE/ATA disk cards
+
+ The contents of this file are subject to the Mozilla Public
+ License Version 1.1 (the "License"); you may not use this file
+ except in compliance with the License. You may obtain a copy of
+ the License at http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS
+ IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ implied. See the License for the specific language governing
+ rights and limitations under the License.
+
+ The initial developer of the original code is David A. Hinds
+ <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+
+ Alternatively, the contents of this file may be used under the
+ terms of the GNU General Public License version 2 (the "GPL"), in
+ which case the provisions of the GPL are applicable instead of the
+ above. If you wish to allow the use of your version of this file
+ only under the terms of the GPL and not to allow others to use
+ your version of this file under the MPL, indicate your decision
+ by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL. If you do not delete
+ the provisions above, a recipient may use your version of this
+ file under either the MPL or the GPL.
+
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <linux/ide.h>
+#include <linux/major.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+
+#define DRV_NAME "ide-cs"
+
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
+MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
+MODULE_LICENSE("Dual MPL/GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+#ifdef CONFIG_PCMCIA_DEBUG
+INT_MODULE_PARM(pc_debug, 0);
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+#else
+#define DEBUG(n, args...)
+#endif
+
+/*====================================================================*/
+
+typedef struct ide_info_t {
+ struct pcmcia_device *p_dev;
+ struct ide_host *host;
+ int ndev;
+ dev_node_t node;
+} ide_info_t;
+
+static void ide_release(struct pcmcia_device *);
+static int ide_config(struct pcmcia_device *);
+
+static void ide_detach(struct pcmcia_device *p_dev);
+
+
+
+
+/*======================================================================
+
+ ide_attach() creates an "instance" of the driver, allocating
+ local data structures for one device. The device is registered
+ with Card Services.
+
+======================================================================*/
+
+static int ide_probe(struct pcmcia_device *link)
+{
+ ide_info_t *info;
+
+ DEBUG(0, "ide_attach()\n");
+
+ /* Create new ide device */
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->p_dev = link;
+ link->priv = info;
+
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ link->io.IOAddrLines = 3;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+
+ return ide_config(link);
+} /* ide_attach */
+
+/*======================================================================
+
+ This deletes a driver "instance". The device is de-registered
+ with Card Services. If it has been released, all local data
+ structures are freed. Otherwise, the structures will be freed
+ when the device is released.
+
+======================================================================*/
+
+static void ide_detach(struct pcmcia_device *link)
+{
+ ide_info_t *info = link->priv;
+ ide_hwif_t *hwif = info->host->ports[0];
+ unsigned long data_addr, ctl_addr;
+
+ DEBUG(0, "ide_detach(0x%p)\n", link);
+
+ data_addr = hwif->io_ports.data_addr;
+ ctl_addr = hwif->io_ports.ctl_addr;
+
+ ide_release(link);
+
+ release_region(ctl_addr, 1);
+ release_region(data_addr, 8);
+
+ kfree(info);
+} /* ide_detach */
+
+static const struct ide_port_ops idecs_port_ops = {
+ .quirkproc = ide_undecoded_slave,
+};
+
+static const struct ide_port_info idecs_port_info = {
+ .port_ops = &idecs_port_ops,
+ .host_flags = IDE_HFLAG_NO_DMA,
+};
+
+static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
+ unsigned long irq, struct pcmcia_device *handle)
+{
+ struct ide_host *host;
+ ide_hwif_t *hwif;
+ int i, rc;
+ hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+
+ if (!request_region(io, 8, DRV_NAME)) {
+ printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
+ DRV_NAME, io, io + 7);
+ return NULL;
+ }
+
+ if (!request_region(ctl, 1, DRV_NAME)) {
+ printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
+ DRV_NAME, ctl);
+ release_region(io, 8);
+ return NULL;
+ }
+
+ memset(&hw, 0, sizeof(hw));
+ ide_std_init_ports(&hw, io, ctl);
+ hw.irq = irq;
+ hw.chipset = ide_pci;
+ hw.dev = &handle->dev;
+
+ rc = ide_host_add(&idecs_port_info, hws, &host);
+ if (rc)
+ goto out_release;
+
+ hwif = host->ports[0];
+
+ if (hwif->present)
+ return host;
+
+ /* retry registration in case device is still spinning up */
+ for (i = 0; i < 10; i++) {
+ msleep(100);
+ ide_port_scan(hwif);
+ if (hwif->present)
+ return host;
+ }
+
+ return host;
+
+out_release:
+ release_region(ctl, 1);
+ release_region(io, 8);
+ return NULL;
+}
+
+/*======================================================================
+
+ ide_config() is scheduled to run after a CARD_INSERTION event
+ is received, to configure the PCMCIA socket, and to make the
+ ide device available to the system.
+
+======================================================================*/
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+struct pcmcia_config_check {
+ unsigned long ctl_base;
+ int skip_vcc;
+ int is_kme;
+};
+
+static int pcmcia_check_one_config(struct pcmcia_device *pdev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ struct pcmcia_config_check *stk = priv_data;
+
+ /* Check for matching Vcc, unless we're desperate */
+ if (!stk->skip_vcc) {
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ pdev->conf.ConfigIndex = cfg->index;
+ pdev->io.BasePort1 = io->win[0].base;
+ pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ if (io->nwin == 2) {
+ pdev->io.NumPorts1 = 8;
+ pdev->io.BasePort2 = io->win[1].base;
+ pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort2;
+ } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
+ pdev->io.NumPorts1 = io->win[0].len;
+ pdev->io.NumPorts2 = 0;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+ } else
+ return -ENODEV;
+ /* If we've got this far, we're done */
+ return 0;
+ }
+ return -ENODEV;
+}
+
+static int ide_config(struct pcmcia_device *link)
+{
+ ide_info_t *info = link->priv;
+ struct pcmcia_config_check *stk = NULL;
+ int last_ret = 0, last_fn = 0, is_kme = 0;
+ unsigned long io_base, ctl_base;
+ struct ide_host *host;
+
+ DEBUG(0, "ide_config(0x%p)\n", link);
+
+ is_kme = ((link->manf_id == MANFID_KME) &&
+ ((link->card_id == PRODID_KME_KXLC005_A) ||
+ (link->card_id == PRODID_KME_KXLC005_B)));
+
+ stk = kzalloc(sizeof(*stk), GFP_KERNEL);
+ if (!stk)
+ goto err_mem;
+ stk->is_kme = is_kme;
+ stk->skip_vcc = io_base = ctl_base = 0;
+
+ if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
+ stk->skip_vcc = 1;
+ if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
+ goto failed; /* No suitable config found */
+ }
+ io_base = link->io.BasePort1;
+ ctl_base = stk->ctl_base;
+
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+
+ /* disable drive interrupts during IDE probe */
+ outb(0x02, ctl_base);
+
+ /* special setup for KXLC005 card */
+ if (is_kme)
+ outb(0x81, ctl_base+1);
+
+ host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
+ if (host == NULL && link->io.NumPorts1 == 0x20) {
+ outb(0x02, ctl_base + 0x10);
+ host = idecs_register(io_base + 0x10, ctl_base + 0x10,
+ link->irq.AssignedIRQ, link);
+ }
+
+ if (host == NULL)
+ goto failed;
+
+ info->ndev = 1;
+ sprintf(info->node.dev_name, "hd%c", 'a' + host->ports[0]->index * 2);
+ info->node.major = host->ports[0]->major;
+ info->node.minor = 0;
+ info->host = host;
+ link->dev_node = &info->node;
+ printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
+ info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
+
+ kfree(stk);
+ return 0;
+
+err_mem:
+ printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
+ goto failed;
+
+cs_failed:
+ cs_error(link, last_fn, last_ret);
+failed:
+ kfree(stk);
+ ide_release(link);
+ return -ENODEV;
+} /* ide_config */
+
+/*======================================================================
+
+ After a card is removed, ide_release() will unregister the net
+ device, and release the PCMCIA configuration. If the device is
+ still open, this will be postponed until it is closed.
+
+======================================================================*/
+
+static void ide_release(struct pcmcia_device *link)
+{
+ ide_info_t *info = link->priv;
+ struct ide_host *host = info->host;
+
+ DEBUG(0, "ide_release(0x%p)\n", link);
+
+ if (info->ndev)
+ /* FIXME: if this fails we need to queue the cleanup somehow
+ -- need to investigate the required PCMCIA magic */
+ ide_host_remove(host);
+
+ info->ndev = 0;
+
+ pcmcia_disable_device(link);
+} /* ide_release */
+
+
+/*======================================================================
+
+ The card status event handler. Mostly, this schedules other
+ stuff to run after an event is received. A CARD_REMOVAL event
+ also sets some flags to discourage the ide drivers from
+ talking to the ports.
+
+======================================================================*/
+
+static struct pcmcia_device_id ide_ids[] = {
+ PCMCIA_DEVICE_FUNC_ID(4),
+ PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
+ PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
+ PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
+ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
+ PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
+ PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
+ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
+ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
+ PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
+ PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
+ PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
+ PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
+ PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
+ PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
+ PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
+ PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
+ PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
+ PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
+ PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
+ PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
+ PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
+ PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
+ PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
+ PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
+ PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
+ PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
+ PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
+ PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
+ PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
+ PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
+ PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
+ PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
+ PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
+ PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
+ PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
+ PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
+ PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
+ PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
+ PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
+ PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
+ PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
+ PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
+ PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
+ PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
+ PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
+ PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
+ PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
+ PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
+ PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, ide_ids);
+
+static struct pcmcia_driver ide_cs_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "ide-cs",
+ },
+ .probe = ide_probe,
+ .remove = ide_detach,
+ .id_table = ide_ids,
+};
+
+static int __init init_ide_cs(void)
+{
+ return pcmcia_register_driver(&ide_cs_driver);
+}
+
+static void __exit exit_ide_cs(void)
+{
+ pcmcia_unregister_driver(&ide_cs_driver);
+}
+
+late_initcall(init_ide_cs);
+module_exit(exit_ide_cs);