ide: cable detection fixes (take 2)

Tejun's recent eighty_ninty_three() fix has inspired me to do more thorough
review of the cable detection code...

* print user-friendly warning about limiting the maximum transfer speed
  to UDMA33 (and the reason behind it) when 80-wire cable is not detected,
  also while at it cleanup eighty_ninty_three() a bit

* use eighty_ninty_three() in ide_ata66_check(), this actually fixes 3 bugs:
  - bit 14 (word 93 validity check) == 1 && bit 13 (80-wire cable test) == 1
    were used as 80-wire cable present test for CONFIG_IDEDMA_IVB=n case
    (please see FIXME comment in eighty_ninty_three() for more details)
  - CONFIG_IDEDMA_IVB=y/n cases were interchanged
  - check for SATA devices was missing

* remove private cable warnings from pdc_202xx{old,new} drivers now that core
  code provides this functionality (plus, in pdc202xx_new case the test could
  give false warnings for ATAPI devices because pdc202xx_new driver doesn't
  even support ATAPI DMA)

Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2 files changed, 1 insertions, 35 deletions

diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 772ca4007de..65b1e124edf 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -37,8 +37,6 @@
 #include <asm/pci-bridge.h>
 #endif
 
-#define PDC202_DEBUG_CABLE	0
-
 #undef DEBUG
 
 #ifdef DEBUG
@@ -234,17 +232,8 @@ static int config_chipset_for_dma(ide_drive_t *drive)
 {
 	struct hd_driveid *id	= drive->id;
 	ide_hwif_t *hwif	= HWIF(drive);
-	u8 ultra_66		= (id->dma_ultra & 0x0078) ? 1 : 0;
-	u8 cable		= pdcnew_cable_detect(hwif);
 	u8 speed;
 
-	if (ultra_66 && cable) {
-		printk(KERN_WARNING "Warning: %s channel "
-		       "requires an 80-pin cable for operation.\n",
-		       hwif->channel ? "Secondary" : "Primary");
-		printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
-	}
-
 	if (id->capability & 4) {
 		/*
 		 * Set IORDY_EN & PREFETCH_EN (this seems to have
@@ -547,11 +536,6 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
 	if (!noautodma)
 		hwif->autodma = 1;
 	hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
-
-#if PDC202_DEBUG_CABLE
-	printk(KERN_DEBUG "%s: %s-pin cable\n",
-		hwif->name, hwif->udma_four ? "80" : "40");
-#endif /* PDC202_DEBUG_CABLE */
 }
 
 static int __devinit init_setup_pdcnew(struct pci_dev *dev, ide_pci_device_t *d)
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 207a6191fac..7146fe3f6ba 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -46,7 +46,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#define PDC202_DEBUG_CABLE		0
 #define PDC202XX_DEBUG_DRIVE_INFO	0
 
 static const char *pdc_quirk_drives[] = {
@@ -238,20 +237,7 @@ static int config_chipset_for_dma (ide_drive_t *drive)
 	u32 drive_conf		= 0;
 	u8 drive_pci		= 0x60 + (drive->dn << 2);
 	u8 test1 = 0, test2 = 0, speed = -1;
-	u8 AP = 0, cable = 0;
-
-	u8 ultra_66		= ((id->dma_ultra & 0x0010) ||
-				   (id->dma_ultra & 0x0008)) ? 1 : 0;
-
-	if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
-		cable = pdc202xx_old_cable_detect(hwif);
-	else
-		ultra_66 = 0;
-
-	if (ultra_66 && cable) {
-		printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
-		printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
-	}
+	u8 AP = 0;
 
 	if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
 		pdc_old_disable_66MHz_clock(drive->hwif);
@@ -477,10 +463,6 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
 	if (!noautodma)
 		hwif->autodma = 1;
 	hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
-#if PDC202_DEBUG_CABLE
-	printk(KERN_DEBUG "%s: %s-pin cable\n",
-		hwif->name, hwif->udma_four ? "80" : "40");
-#endif /* PDC202_DEBUG_CABLE */	
 }
 
 static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)