IB/ipath: misc driver support code

EEPROM support, interrupt handling, statistics gathering, and write
combining management for x86_64.

A note regarding i2c: The Atmel EEPROM hardware we use looks like an
i2c device electrically, but is not i2c compliant at all from a
functional perspective.  We tried using the kernel's i2c support to
talk to it, but failed.

Normal i2c devices have a single 7-bit or 10-bit i2c address that they
respond to.  Valid 7-bit addresses range from 0x03 to 0x77.  Addresses
0x00 to 0x02 and 0x78 to 0x7F are special reserved addresses
(e.g. 0x00 is the "general call" address.)  The Atmel device, on the
other hand, responds to ALL addresses.  It's designed to be the only
device on a given i2c bus.  A given i2c device address corresponds to
the memory address within the i2c device itself.

At least one reason why the linux core i2c stuff won't work for this
is that it prohibits access to reserved addresses like 0x00, which are
really valid addresses on the Atmel devices.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 841 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
new file mode 100644
index 00000000000..60f5f410806
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -0,0 +1,841 @@
+/*
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/pci.h>
+
+#include "ipath_kernel.h"
+#include "ips_common.h"
+#include "ipath_layer.h"
+
+#define E_SUM_PKTERRS \
+	(INFINIPATH_E_RHDRLEN | INFINIPATH_E_RBADTID | \
+	 INFINIPATH_E_RBADVERSION | INFINIPATH_E_RHDR | \
+	 INFINIPATH_E_RLONGPKTLEN | INFINIPATH_E_RSHORTPKTLEN | \
+	 INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RMINPKTLEN | \
+	 INFINIPATH_E_RFORMATERR | INFINIPATH_E_RUNSUPVL | \
+	 INFINIPATH_E_RUNEXPCHAR | INFINIPATH_E_REBP)
+
+#define E_SUM_ERRS \
+	(INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM | \
+	 INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
+	 INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SUNSUPVL | \
+	 INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
+	 INFINIPATH_E_INVALIDADDR)
+
+static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs)
+{
+	unsigned long sbuf[4];
+	u64 ignore_this_time = 0;
+	u32 piobcnt;
+
+	/* if possible that sendbuffererror could be valid */
+	piobcnt = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+	/* read these before writing errorclear */
+	sbuf[0] = ipath_read_kreg64(
+		dd, dd->ipath_kregs->kr_sendbuffererror);
+	sbuf[1] = ipath_read_kreg64(
+		dd, dd->ipath_kregs->kr_sendbuffererror + 1);
+	if (piobcnt > 128) {
+		sbuf[2] = ipath_read_kreg64(
+			dd, dd->ipath_kregs->kr_sendbuffererror + 2);
+		sbuf[3] = ipath_read_kreg64(
+			dd, dd->ipath_kregs->kr_sendbuffererror + 3);
+	}
+
+	if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) {
+		int i;
+
+		ipath_cdbg(PKT, "SendbufErrs %lx %lx ", sbuf[0], sbuf[1]);
+		if (ipath_debug & __IPATH_PKTDBG && piobcnt > 128)
+			printk("%lx %lx ", sbuf[2], sbuf[3]);
+		for (i = 0; i < piobcnt; i++) {
+			if (test_bit(i, sbuf)) {
+				u32 __iomem *piobuf;
+				if (i < dd->ipath_piobcnt2k)
+					piobuf = (u32 __iomem *)
+						(dd->ipath_pio2kbase +
+						 i * dd->ipath_palign);
+				else
+					piobuf = (u32 __iomem *)
+						(dd->ipath_pio4kbase +
+						 (i - dd->ipath_piobcnt2k) *
+						 dd->ipath_4kalign);
+
+				ipath_cdbg(PKT,
+					   "PIObuf[%u] @%p pbc is %x; ",
+					   i, piobuf, readl(piobuf));
+
+				ipath_disarm_piobufs(dd, i, 1);
+			}
+		}
+		if (ipath_debug & __IPATH_PKTDBG)
+			printk("\n");
+	}
+	if ((errs & (INFINIPATH_E_SDROPPEDDATAPKT |
+		     INFINIPATH_E_SDROPPEDSMPPKT |
+		     INFINIPATH_E_SMINPKTLEN)) &&
+	    !(dd->ipath_flags & IPATH_LINKACTIVE)) {
+		/*
+		 * This can happen when SMA is trying to bring the link
+		 * up, but the IB link changes state at the "wrong" time.
+		 * The IB logic then complains that the packet isn't
+		 * valid.  We don't want to confuse people, so we just
+		 * don't print them, except at debug
+		 */
+		ipath_dbg("Ignoring pktsend errors %llx, because not "
+			  "yet active\n", (unsigned long long) errs);
+		ignore_this_time = INFINIPATH_E_SDROPPEDDATAPKT |
+			INFINIPATH_E_SDROPPEDSMPPKT |
+			INFINIPATH_E_SMINPKTLEN;
+	}
+
+	return ignore_this_time;
+}
+
+/* return the strings for the most common link states */
+static char *ib_linkstate(u32 linkstate)
+{
+	char *ret;
+
+	switch (linkstate) {
+	case IPATH_IBSTATE_INIT:
+		ret = "Init";
+		break;
+	case IPATH_IBSTATE_ARM:
+		ret = "Arm";
+		break;
+	case IPATH_IBSTATE_ACTIVE:
+		ret = "Active";
+		break;
+	default:
+		ret = "Down";
+	}
+
+	return ret;
+}
+
+static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
+				     ipath_err_t errs, int noprint)
+{
+	u64 val;
+	u32 ltstate, lstate;
+
+	/*
+	 * even if diags are enabled, we want to notice LINKINIT, etc.
+	 * We just don't want to change the LED state, or
+	 * dd->ipath_kregs->kr_ibcctrl
+	 */
+	val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+	lstate = val & IPATH_IBSTATE_MASK;
+	if (lstate == IPATH_IBSTATE_INIT || lstate == IPATH_IBSTATE_ARM ||
+	    lstate == IPATH_IBSTATE_ACTIVE) {
+		/*
+		 * only print at SMA if there is a change, debug if not
+		 * (sometimes we want to know that, usually not).
+		 */
+		if (lstate == ((unsigned) dd->ipath_lastibcstat
+			       & IPATH_IBSTATE_MASK)) {
+			ipath_dbg("Status change intr but no change (%s)\n",
+				  ib_linkstate(lstate));
+		}
+		else
+			ipath_cdbg(SMA, "Unit %u link state %s, last "
+				   "was %s\n", dd->ipath_unit,
+				   ib_linkstate(lstate),
+				   ib_linkstate((unsigned)
+				   		dd->ipath_lastibcstat
+				   		& IPATH_IBSTATE_MASK));
+	}
+	else {
+		lstate = dd->ipath_lastibcstat & IPATH_IBSTATE_MASK;
+		if (lstate == IPATH_IBSTATE_INIT ||
+		    lstate == IPATH_IBSTATE_ARM ||
+		    lstate == IPATH_IBSTATE_ACTIVE)
+			ipath_cdbg(SMA, "Unit %u link state down"
+				   " (state 0x%x), from %s\n",
+				   dd->ipath_unit,
+				   (u32)val & IPATH_IBSTATE_MASK,
+				   ib_linkstate(lstate));
+		else
+			ipath_cdbg(VERBOSE, "Unit %u link state changed "
+				   "to 0x%x from down (%x)\n",
+				   dd->ipath_unit, (u32) val, lstate);
+	}
+	ltstate = (val >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
+		INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
+	lstate = (val >> INFINIPATH_IBCS_LINKSTATE_SHIFT) &
+		INFINIPATH_IBCS_LINKSTATE_MASK;
+
+	if (ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
+	    ltstate == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
+		u32 last_ltstate;
+
+		/*
+		 * Ignore cycling back and forth from Polling.Active
+		 * to Polling.Quiet while waiting for the other end of
+		 * the link to come up. We will cycle back and forth
+		 * between them if no cable is plugged in,
+		 * the other device is powered off or disabled, etc.
+		 */
+		last_ltstate = (dd->ipath_lastibcstat >>
+				INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)
+			& INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
+		if (last_ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE
+		    || last_ltstate ==
+		    INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
+			if (dd->ipath_ibpollcnt > 40) {
+				dd->ipath_flags |= IPATH_NOCABLE;
+				*dd->ipath_statusp |=
+					IPATH_STATUS_IB_NOCABLE;
+			} else
+				dd->ipath_ibpollcnt++;
+			goto skip_ibchange;
+		}
+	}
+	dd->ipath_ibpollcnt = 0;	/* some state other than 2 or 3 */
+	ipath_stats.sps_iblink++;
+	if (ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
+		dd->ipath_flags |= IPATH_LINKDOWN;
+		dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
+				     | IPATH_LINKACTIVE |
+				     IPATH_LINKARMED);
+		*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+		if (!noprint) {
+			if (((dd->ipath_lastibcstat >>
+			      INFINIPATH_IBCS_LINKSTATE_SHIFT) &
+			     INFINIPATH_IBCS_LINKSTATE_MASK)
+			    == INFINIPATH_IBCS_L_STATE_ACTIVE)
+				/* if from up to down be more vocal */
+				ipath_cdbg(SMA,
+					   "Unit %u link now down (%s)\n",
+					   dd->ipath_unit,
+					   ipath_ibcstatus_str[ltstate]);
+			else
+				ipath_cdbg(VERBOSE, "Unit %u link is "
+					   "down (%s)\n", dd->ipath_unit,
+					   ipath_ibcstatus_str[ltstate]);
+		}
+
+		dd->ipath_f_setextled(dd, lstate, ltstate);
+	} else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ACTIVE) {
+		dd->ipath_flags |= IPATH_LINKACTIVE;
+		dd->ipath_flags &=
+			~(IPATH_LINKUNK | IPATH_LINKINIT | IPATH_LINKDOWN |
+			  IPATH_LINKARMED | IPATH_NOCABLE);
+		*dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
+		*dd->ipath_statusp |=
+			IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
+		dd->ipath_f_setextled(dd, lstate, ltstate);
+
+		__ipath_layer_intr(dd, IPATH_LAYER_INT_IF_UP);
+	} else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_INIT) {
+		/*
+		 * set INIT and DOWN.  Down is checked by most of the other
+		 * code, but INIT is useful to know in a few places.
+		 */
+		dd->ipath_flags |= IPATH_LINKINIT | IPATH_LINKDOWN;
+		dd->ipath_flags &=
+			~(IPATH_LINKUNK | IPATH_LINKACTIVE | IPATH_LINKARMED
+			  | IPATH_NOCABLE);
+		*dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
+					| IPATH_STATUS_IB_READY);
+		dd->ipath_f_setextled(dd, lstate, ltstate);
+	} else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ARM) {
+		dd->ipath_flags |= IPATH_LINKARMED;
+		dd->ipath_flags &=
+			~(IPATH_LINKUNK | IPATH_LINKDOWN | IPATH_LINKINIT |
+			  IPATH_LINKACTIVE | IPATH_NOCABLE);
+		*dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
+					| IPATH_STATUS_IB_READY);
+		dd->ipath_f_setextled(dd, lstate, ltstate);
+	} else {
+		if (!noprint)
+			ipath_dbg("IBstatuschange unit %u: %s (%x)\n",
+				  dd->ipath_unit,
+				  ipath_ibcstatus_str[ltstate], ltstate);
+	}
+skip_ibchange:
+	dd->ipath_lastibcstat = val;
+}
+
+static void handle_supp_msgs(struct ipath_devdata *dd,
+			     unsigned supp_msgs, char msg[512])
+{
+	/*
+	 * Print the message unless it's ibc status change only, which
+	 * happens so often we never want to count it.
+	 */
+	if (dd->ipath_lasterror & ~INFINIPATH_E_IBSTATUSCHANGED) {
+		ipath_decode_err(msg, sizeof msg, dd->ipath_lasterror &
+				 ~INFINIPATH_E_IBSTATUSCHANGED);
+		if (dd->ipath_lasterror &
+		    ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL))
+			ipath_dev_err(dd, "Suppressed %u messages for "
+				      "fast-repeating errors (%s) (%llx)\n",
+				      supp_msgs, msg,
+				      (unsigned long long)
+				      dd->ipath_lasterror);
+		else {
+			/*
+			 * rcvegrfull and rcvhdrqfull are "normal", for some
+			 * types of processes (mostly benchmarks) that send
+			 * huge numbers of messages, while not processing
+			 * them. So only complain about these at debug
+			 * level.
+			 */
+			ipath_dbg("Suppressed %u messages for %s\n",
+				  supp_msgs, msg);
+		}
+	}
+}
+
+static unsigned handle_frequent_errors(struct ipath_devdata *dd,
+				       ipath_err_t errs, char msg[512],
+				       int *noprint)
+{
+	unsigned long nc;
+	static unsigned long nextmsg_time;
+	static unsigned nmsgs, supp_msgs;
+
+	/*
+	 * Throttle back "fast" messages to no more than 10 per 5 seconds.
+	 * This isn't perfect, but it's a reasonable heuristic. If we get
+	 * more than 10, give a 6x longer delay.
+	 */
+	nc = jiffies;
+	if (nmsgs > 10) {
+		if (time_before(nc, nextmsg_time)) {
+			*noprint = 1;
+			if (!supp_msgs++)
+				nextmsg_time = nc + HZ * 3;
+		}
+		else if (supp_msgs) {
+			handle_supp_msgs(dd, supp_msgs, msg);
+			supp_msgs = 0;
+			nmsgs = 0;
+		}
+	}
+	else if (!nmsgs++ || time_after(nc, nextmsg_time))
+		nextmsg_time = nc + HZ / 2;
+
+	return supp_msgs;
+}
+
+static void handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
+{
+	char msg[512];
+	u64 ignore_this_time = 0;
+	int i;
+	int chkerrpkts = 0, noprint = 0;
+	unsigned supp_msgs;
+
+	supp_msgs = handle_frequent_errors(dd, errs, msg, &noprint);
+
+	/*
+	 * don't report errors that are masked (includes those always
+	 * ignored)
+	 */
+	errs &= ~dd->ipath_maskederrs;
+
+	/* do these first, they are most important */
+	if (errs & INFINIPATH_E_HARDWARE) {
+		/* reuse same msg buf */
+		dd->ipath_f_handle_hwerrors(dd, msg, sizeof msg);
+	}
+
+	if (!noprint && (errs & ~infinipath_e_bitsextant))
+		ipath_dev_err(dd, "error interrupt with unknown errors "
+			      "%llx set\n", (unsigned long long)
+			      (errs & ~infinipath_e_bitsextant));
+
+	if (errs & E_SUM_ERRS)
+		ignore_this_time = handle_e_sum_errs(dd, errs);
+
+	if (supp_msgs == 250000) {
+		/*
+		 * It's not entirely reasonable assuming that the errors set
+		 * in the last clear period are all responsible for the
+		 * problem, but the alternative is to assume it's the only
+		 * ones on this particular interrupt, which also isn't great
+		 */
+		dd->ipath_maskederrs |= dd->ipath_lasterror | errs;
+		ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+				 ~dd->ipath_maskederrs);
+		ipath_decode_err(msg, sizeof msg,
+				 (dd->ipath_maskederrs & ~dd->
+				  ipath_ignorederrs));
+
+		if ((dd->ipath_maskederrs & ~dd->ipath_ignorederrs) &
+		    ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL))
+			ipath_dev_err(dd, "Disabling error(s) %llx because "
+				      "occuring too frequently (%s)\n",
+				      (unsigned long long)
+				      (dd->ipath_maskederrs &
+				       ~dd->ipath_ignorederrs), msg);
+		else {
+			/*
+			 * rcvegrfull and rcvhdrqfull are "normal",
+			 * for some types of processes (mostly benchmarks)
+			 * that send huge numbers of messages, while not
+			 * processing them.  So only complain about
+			 * these at debug level.
+			 */
+			ipath_dbg("Disabling frequent queue full errors "
+				  "(%s)\n", msg);
+		}
+
+		/*
+		 * Re-enable the masked errors after around 3 minutes.  in
+		 * ipath_get_faststats().  If we have a series of fast
+		 * repeating but different errors, the interval will keep
+		 * stretching out, but that's OK, as that's pretty
+		 * catastrophic.
+		 */
+		dd->ipath_unmasktime = jiffies + HZ * 180;
+	}
+
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, errs);
+	if (ignore_this_time)
+		errs &= ~ignore_this_time;
+	if (errs & ~dd->ipath_lasterror) {
+		errs &= ~dd->ipath_lasterror;
+		/* never suppress duplicate hwerrors or ibstatuschange */
+		dd->ipath_lasterror |= errs &
+			~(INFINIPATH_E_HARDWARE |
+			  INFINIPATH_E_IBSTATUSCHANGED);
+	}
+	if (!errs)
+		return;
+
+	if (!noprint)
+		/*
+		 * the ones we mask off are handled specially below or above
+		 */
+		ipath_decode_err(msg, sizeof msg,
+				 errs & ~(INFINIPATH_E_IBSTATUSCHANGED |
+					  INFINIPATH_E_RRCVEGRFULL |
+					  INFINIPATH_E_RRCVHDRFULL |
+					  INFINIPATH_E_HARDWARE));
+	else
+		/* so we don't need if (!noprint) at strlcat's below */
+		*msg = 0;
+
+	if (errs & E_SUM_PKTERRS) {
+		ipath_stats.sps_pkterrs++;
+		chkerrpkts = 1;
+	}
+	if (errs & E_SUM_ERRS)
+		ipath_stats.sps_errs++;
+
+	if (errs & (INFINIPATH_E_RICRC | INFINIPATH_E_RVCRC)) {
+		ipath_stats.sps_crcerrs++;
+		chkerrpkts = 1;
+	}
+
+	/*
+	 * We don't want to print these two as they happen, or we can make
+	 * the situation even worse, because it takes so long to print
+	 * messages to serial consoles.  Kernel ports get printed from
+	 * fast_stats, no more than every 5 seconds, user ports get printed
+	 * on close
+	 */
+	if (errs & INFINIPATH_E_RRCVHDRFULL) {
+		int any;
+		u32 hd, tl;
+		ipath_stats.sps_hdrqfull++;
+		for (any = i = 0; i < dd->ipath_cfgports; i++) {
+			struct ipath_portdata *pd = dd->ipath_pd[i];
+			if (i == 0) {
+				hd = dd->ipath_port0head;
+				tl = (u32) le64_to_cpu(
+					*dd->ipath_hdrqtailptr);
+			} else if (pd && pd->port_cnt &&
+				   pd->port_rcvhdrtail_kvaddr) {
+				/*
+				 * don't report same point multiple times,
+				 * except kernel
+				 */
+				tl = (u32) * pd->port_rcvhdrtail_kvaddr;
+				if (tl == dd->ipath_lastrcvhdrqtails[i])
+					continue;
+				hd = ipath_read_ureg32(dd, ur_rcvhdrhead,
+						       i);
+			} else
+				continue;
+			if (hd == (tl + 1) ||
+			    (!hd && tl == dd->ipath_hdrqlast)) {
+				dd->ipath_lastrcvhdrqtails[i] = tl;
+				pd->port_hdrqfull++;
+				if (i == 0)
+					chkerrpkts = 1;
+			}
+		}
+	}
+	if (errs & INFINIPATH_E_RRCVEGRFULL) {
+		/*
+		 * since this is of less importance and not likely to
+		 * happen without also getting hdrfull, only count
+		 * occurrences; don't check each port (or even the kernel
+		 * vs user)
+		 */
+		ipath_stats.sps_etidfull++;
+		if (dd->ipath_port0head !=
+		    (u32) le64_to_cpu(*dd->ipath_hdrqtailptr))
+			chkerrpkts = 1;
+	}
+
+	/*
+	 * do this before IBSTATUSCHANGED, in case both bits set in a single
+	 * interrupt; we want the STATUSCHANGE to "win", so we do our
+	 * internal copy of state machine correctly
+	 */
+	if (errs & INFINIPATH_E_RIBLOSTLINK) {
+		/*
+		 * force through block below
+		 */
+		errs |= INFINIPATH_E_IBSTATUSCHANGED;
+		ipath_stats.sps_iblink++;
+		dd->ipath_flags |= IPATH_LINKDOWN;
+		dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
+				     | IPATH_LINKARMED | IPATH_LINKACTIVE);
+		*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+		if (!noprint) {
+			u64 st = ipath_read_kreg64(
+				dd, dd->ipath_kregs->kr_ibcstatus);
+
+			ipath_dbg("Lost link, link now down (%s)\n",
+				  ipath_ibcstatus_str[st & 0xf]);
+		}
+	}
+	if (errs & INFINIPATH_E_IBSTATUSCHANGED)
+		handle_e_ibstatuschanged(dd, errs, noprint);
+
+	if (errs & INFINIPATH_E_RESET) {
+		if (!noprint)
+			ipath_dev_err(dd, "Got reset, requires re-init "
+				      "(unload and reload driver)\n");
+		dd->ipath_flags &= ~IPATH_INITTED;	/* needs re-init */
+		/* mark as having had error */
+		*dd->ipath_statusp |= IPATH_STATUS_HWERROR;
+		*dd->ipath_statusp &= ~IPATH_STATUS_IB_CONF;
+	}
+
+	if (!noprint && *msg)
+		ipath_dev_err(dd, "%s error\n", msg);
+	if (dd->ipath_sma_state_wanted & dd->ipath_flags) {
+		ipath_cdbg(VERBOSE, "sma wanted state %x, iflags now %x, "
+			   "waking\n", dd->ipath_sma_state_wanted,
+			   dd->ipath_flags);
+		wake_up_interruptible(&ipath_sma_state_wait);
+	}
+
+	if (chkerrpkts)
+		/* process possible error packets in hdrq */
+		ipath_kreceive(dd);
+}
+
+/* this is separate to allow for better optimization of ipath_intr() */
+
+static void ipath_bad_intr(struct ipath_devdata *dd, u32 * unexpectp)
+{
+	/*
+	 * sometimes happen during driver init and unload, don't want
+	 * to process any interrupts at that point
+	 */
+
+	/* this is just a bandaid, not a fix, if something goes badly
+	 * wrong */
+	if (++*unexpectp > 100) {
+		if (++*unexpectp > 105) {
+			/*
+			 * ok, we must be taking somebody else's interrupts,
+			 * due to a messed up mptable and/or PIRQ table, so
+			 * unregister the interrupt.  We've seen this during
+			 * linuxbios development work, and it may happen in
+			 * the future again.
+			 */
+			if (dd->pcidev && dd->pcidev->irq) {
+				ipath_dev_err(dd, "Now %u unexpected "
+					      "interrupts, unregistering "
+					      "interrupt handler\n",
+					      *unexpectp);
+				ipath_dbg("free_irq of irq %x\n",
+					  dd->pcidev->irq);
+				free_irq(dd->pcidev->irq, dd);
+			}
+		}
+		if (ipath_read_kreg32(dd, dd->ipath_kregs->kr_intmask)) {
+			ipath_dev_err(dd, "%u unexpected interrupts, "
+				      "disabling interrupts completely\n",
+				      *unexpectp);
+			/*
+			 * disable all interrupts, something is very wrong
+			 */
+			ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
+					 0ULL);
+		}
+	} else if (*unexpectp > 1)
+		ipath_dbg("Interrupt when not ready, should not happen, "
+			  "ignoring\n");
+}
+
+static void ipath_bad_regread(struct ipath_devdata *dd)
+{
+	static int allbits;
+
+	/* separate routine, for better optimization of ipath_intr() */
+
+	/*
+	 * We print the message and disable interrupts, in hope of
+	 * having a better chance of debugging the problem.
+	 */
+	ipath_dev_err(dd,
+		      "Read of interrupt status failed (all bits set)\n");
+	if (allbits++) {
+		/* disable all interrupts, something is very wrong */
+		ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
+		if (allbits == 2) {
+			ipath_dev_err(dd, "Still bad interrupt status, "
+				      "unregistering interrupt\n");
+			free_irq(dd->pcidev->irq, dd);
+		} else if (allbits > 2) {
+			if ((allbits % 10000) == 0)
+				printk(".");
+		} else
+			ipath_dev_err(dd, "Disabling interrupts, "
+				      "multiple errors\n");
+	}
+}
+
+static void handle_port_pioavail(struct ipath_devdata *dd)
+{
+	u32 i;
+	/*
+	 * start from port 1, since for now port 0  is never using
+	 * wait_event for PIO
+	 */
+	for (i = 1; dd->ipath_portpiowait && i < dd->ipath_cfgports; i++) {
+		struct ipath_portdata *pd = dd->ipath_pd[i];
+
+		if (pd && pd->port_cnt &&
+		    dd->ipath_portpiowait & (1U << i)) {
+			clear_bit(i, &dd->ipath_portpiowait);
+			if (test_bit(IPATH_PORT_WAITING_PIO,
+				     &pd->port_flag)) {
+				clear_bit(IPATH_PORT_WAITING_PIO,
+					  &pd->port_flag);
+				wake_up_interruptible(&pd->port_wait);
+			}
+		}
+	}
+}
+
+static void handle_layer_pioavail(struct ipath_devdata *dd)
+{
+	int ret;
+
+	ret = __ipath_layer_intr(dd, IPATH_LAYER_INT_SEND_CONTINUE);
+	if (ret > 0)
+		goto clear;
+
+	ret = __ipath_verbs_piobufavail(dd);
+	if (ret > 0)
+		goto clear;
+
+	return;
+clear:
+	set_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+			 dd->ipath_sendctrl);
+}
+
+static void handle_rcv(struct ipath_devdata *dd, u32 istat)
+{
+	u64 portr;
+	int i;
+	int rcvdint = 0;
+
+	portr = ((istat >> INFINIPATH_I_RCVAVAIL_SHIFT) &
+		 infinipath_i_rcvavail_mask)
+		| ((istat >> INFINIPATH_I_RCVURG_SHIFT) &
+		   infinipath_i_rcvurg_mask);
+	for (i = 0; i < dd->ipath_cfgports; i++) {
+		struct ipath_portdata *pd = dd->ipath_pd[i];
+		if (portr & (1 << i) && pd &&
+		    pd->port_cnt) {
+			if (i == 0)
+				ipath_kreceive(dd);
+			else if (test_bit(IPATH_PORT_WAITING_RCV,
+					  &pd->port_flag)) {
+				int rcbit;
+				clear_bit(IPATH_PORT_WAITING_RCV,
+					  &pd->port_flag);
+				rcbit = i + INFINIPATH_R_INTRAVAIL_SHIFT;
+				clear_bit(1UL << rcbit, &dd->ipath_rcvctrl);
+				wake_up_interruptible(&pd->port_wait);
+				rcvdint = 1;
+			}
+		}
+	}
+	if (rcvdint) {
+		/* only want to take one interrupt, so turn off the rcv
+		 * interrupt for all the ports that we did the wakeup on
+		 * (but never for kernel port)
+		 */
+		ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+				 dd->ipath_rcvctrl);
+	}
+}
+
+irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
+{
+	struct ipath_devdata *dd = data;
+	u32 istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
+	ipath_err_t estat = 0;
+	static unsigned unexpected = 0;
+	irqreturn_t ret;
+
+	if (unlikely(!istat)) {
+		ipath_stats.sps_nullintr++;
+		ret = IRQ_NONE; /* not our interrupt, or already handled */
+		goto bail;
+	}
+	if (unlikely(istat == -1)) {
+		ipath_bad_regread(dd);
+		/* don't know if it was our interrupt or not */
+		ret = IRQ_NONE;
+		goto bail;
+	}
+
+	ipath_stats.sps_ints++;
+
+	/*
+	 * this needs to be flags&initted, not statusp, so we keep
+	 * taking interrupts even after link goes down, etc.
+	 * Also, we *must* clear the interrupt at some point, or we won't
+	 * take it again, which can be real bad for errors, etc...
+	 */
+
+	if (!(dd->ipath_flags & IPATH_INITTED)) {
+		ipath_bad_intr(dd, &unexpected);
+		ret = IRQ_NONE;
+		goto bail;
+	}
+	if (unexpected)
+		unexpected = 0;
+
+	ipath_cdbg(VERBOSE, "intr stat=0x%x\n", istat);
+
+	if (istat & ~infinipath_i_bitsextant)
+		ipath_dev_err(dd,
+			      "interrupt with unknown interrupts %x set\n",
+			      istat & (u32) ~ infinipath_i_bitsextant);
+
+	if (istat & INFINIPATH_I_ERROR) {
+		ipath_stats.sps_errints++;
+		estat = ipath_read_kreg64(dd,
+					  dd->ipath_kregs->kr_errorstatus);
+		if (!estat)
+			dev_info(&dd->pcidev->dev, "error interrupt (%x), "
+				 "but no error bits set!\n", istat);
+		else if (estat == -1LL)
+			/*
+			 * should we try clearing all, or hope next read
+			 * works?
+			 */
+			ipath_dev_err(dd, "Read of error status failed "
+				      "(all bits set); ignoring\n");
+		else
+			handle_errors(dd, estat);
+	}
+
+	if (istat & INFINIPATH_I_GPIO) {
+		if (unlikely(!(dd->ipath_flags & IPATH_GPIO_INTR))) {
+			u32 gpiostatus;
+			gpiostatus = ipath_read_kreg32(
+				dd, dd->ipath_kregs->kr_gpio_status);
+			ipath_dbg("Unexpected GPIO interrupt bits %x\n",
+				  gpiostatus);
+			ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
+					 gpiostatus);
+		}
+		else {
+			/* Clear GPIO status bit 2 */
+			ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
+					 (u64) (1 << 2));
+
+			/*
+			 * Packets are available in the port 0 rcv queue.
+			 * Eventually this needs to be generalized to check
+			 * IPATH_GPIO_INTR, and the specific GPIO bit, if
+			 * GPIO interrupts are used for anything else.
+			 */
+			ipath_kreceive(dd);
+		}
+	}
+
+	/*
+	 * clear the ones we will deal with on this round
+	 * We clear it early, mostly for receive interrupts, so we
+	 * know the chip will have seen this by the time we process
+	 * the queue, and will re-interrupt if necessary.  The processor
+	 * itself won't take the interrupt again until we return.
+	 */
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
+
+	if (istat & INFINIPATH_I_SPIOBUFAVAIL) {
+		clear_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
+		ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+				 dd->ipath_sendctrl);
+
+		if (dd->ipath_portpiowait)
+			handle_port_pioavail(dd);
+
+		handle_layer_pioavail(dd);
+	}
+
+	/*
+	 * we check for both transition from empty to non-empty, and urgent
+	 * packets (those with the interrupt bit set in the header)
+	 */
+
+	if (istat & ((infinipath_i_rcvavail_mask <<
+		      INFINIPATH_I_RCVAVAIL_SHIFT)
+		     | (infinipath_i_rcvurg_mask <<
+			INFINIPATH_I_RCVURG_SHIFT)))
+		handle_rcv(dd, istat);
+
+	ret = IRQ_HANDLED;
+
+bail:
+	return ret;
+}