aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/misc
diff options
context:
space:
mode:
authorDmitry Torokhov <dtor@insightbb.com>2007-05-07 17:31:32 -0400
committerDmitry Torokhov <dtor@insightbb.com>2007-05-08 01:41:29 -0400
commitba0acb5ee318901646f82c134cca2e4de0c43934 (patch)
tree862d0d2b5d06332dce642571f625431c313d04ea /drivers/input/misc
parentb5da20f8f7652e7a9648401a1942b7aac3b9ab9d (diff)
Input: move USB miscellaneous devices under drivers/input/misc
This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/input/misc')
-rw-r--r--drivers/input/misc/Kconfig88
-rw-r--r--drivers/input/misc/Makefile9
-rw-r--r--drivers/input/misc/ati_remote.c862
-rw-r--r--drivers/input/misc/ati_remote2.c543
-rw-r--r--drivers/input/misc/keyspan_remote.c592
-rw-r--r--drivers/input/misc/map_to_7segment.h189
-rw-r--r--drivers/input/misc/powermate.c463
-rw-r--r--drivers/input/misc/yealink.c1004
-rw-r--r--drivers/input/misc/yealink.h220
9 files changed, 3961 insertions, 9 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 1d0d3e765db..6013ace94d9 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
tristate "M68k Beeper support"
depends on M68K
+config INPUT_IXP4XX_BEEPER
+ tristate "IXP4XX Beeper support"
+ depends on ARCH_IXP4XX
+ help
+ If you say yes here, you can connect a beeper to the
+ ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ixp4xx-beeper.
+
config INPUT_COBALT_BTNS
tristate "Cobalt button interface"
depends on MIPS_COBALT
@@ -70,17 +82,79 @@ config INPUT_ATLAS_BTNS
To compile this driver as a module, choose M here: the module will
be called atlas_btns.
-config INPUT_IXP4XX_BEEPER
- tristate "IXP4XX Beeper support"
- depends on ARCH_IXP4XX
+config INPUT_ATI_REMOTE
+ tristate "ATI / X10 USB RF remote control"
+ select USB
help
- If you say yes here, you can connect a beeper to the
- ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+ Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
+ These are RF remotes with USB receivers.
+ The ATI remote comes with many of ATI's All-In-Wonder video cards.
+ The X10 "Lola" remote is available at:
+ <http://www.x10.com/products/lola_sg1.htm>
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote.
+
+config INPUT_ATI_REMOTE2
+ tristate "ATI / Philips USB RF remote control"
+ select USB
+ help
+ Say Y here if you want to use an ATI or Philips USB RF remote control.
+ These are RF remotes with USB receivers.
+ ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
+ and is also available as a separate product.
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote2.
+
+config INPUT_KEYSPAN_REMOTE
+ tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select USB
+ help
+ Say Y here if you want to use a Keyspan DMR USB remote control.
+ Currently only the UIA-11 type of receiver has been tested. The tag
+ on the receiver that connects to the USB port should have a P/N that
+ will tell you what type of DMR you have. The UIA-10 type is not
+ supported at this time. This driver maps all buttons to keypress
+ events.
- If unsure, say Y.
+ To compile this driver as a module, choose M here: the module will
+ be called keyspan_remote.
+
+config INPUT_POWERMATE
+ tristate "Griffin PowerMate and Contour Jog support"
+ select USB
+ help
+ Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
+ These are aluminum dials which can measure clockwise and anticlockwise
+ rotation. The dial also acts as a pushbutton. The base contains an LED
+ which can be instructed to pulse or to switch to a particular intensity.
+
+ You can download userspace tools from
+ <http://sowerbutts.com/powermate/>.
To compile this driver as a module, choose M here: the
- module will be called ixp4xx-beeper.
+ module will be called powermate.
+
+config INPUT_YEALINK
+ tristate "Yealink usb-p1k voip phone"
+ depends EXPERIMENTAL
+ select USB
+ help
+ Say Y here if you want to enable keyboard and LCD functions of the
+ Yealink usb-p1k usb phones. The audio part is enabled by the generic
+ usb sound driver, so you might want to enable that as well.
+
+ For information about how to use these additional functions, see
+ <file:Documentation/input/yealink.txt>.
+
+ To compile this driver as a module, choose M here: the module will be
+ called yealink.
config INPUT_UINPUT
tristate "User level driver support"
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 21e3cca0d33..8b2f7799e25 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -8,9 +8,14 @@ obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
-obj-$(CONFIG_INPUT_UINPUT) += uinput.o
+obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
+obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o
+obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
+obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
+obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
+obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
-obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
+obj-$(CONFIG_INPUT_UINPUT) += uinput.o
diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c
new file mode 100644
index 00000000000..471aab20644
--- /dev/null
+++ b/drivers/input/misc/ati_remote.c
@@ -0,0 +1,862 @@
+/*
+ * USB ATI Remote support
+ *
+ * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
+ * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
+ *
+ * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including
+ * porting to the 2.6 kernel interfaces, along with other modification
+ * to better match the style of the existing usb/input drivers. However, the
+ * protocol and hardware handling is essentially unchanged from 2.1.1.
+ *
+ * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
+ * Vojtech Pavlik.
+ *
+ * Changes:
+ *
+ * Feb 2004: Torrey Hoffman <thoffman@arnor.net>
+ * Version 2.2.0
+ * Jun 2004: Torrey Hoffman <thoffman@arnor.net>
+ * Version 2.2.1
+ * Added key repeat support contributed by:
+ * Vincent Vanackere <vanackere@lif.univ-mrs.fr>
+ * Added support for the "Lola" remote contributed by:
+ * Seth Cohn <sethcohn@yahoo.com>
+ *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ *
+ * Hardware & software notes
+ *
+ * These remote controls are distributed by ATI as part of their
+ * "All-In-Wonder" video card packages. The receiver self-identifies as a
+ * "USB Receiver" with manufacturer "X10 Wireless Technology Inc".
+ *
+ * The "Lola" remote is available from X10. See:
+ * http://www.x10.com/products/lola_sg1.htm
+ * The Lola is similar to the ATI remote but has no mouse support, and slightly
+ * different keys.
+ *
+ * It is possible to use multiple receivers and remotes on multiple computers
+ * simultaneously by configuring them to use specific channels.
+ *
+ * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
+ * Actually, it may even support more, at least in some revisions of the
+ * hardware.
+ *
+ * Each remote can be configured to transmit on one channel as follows:
+ * - Press and hold the "hand icon" button.
+ * - When the red LED starts to blink, let go of the "hand icon" button.
+ * - When it stops blinking, input the channel code as two digits, from 01
+ * to 16, and press the hand icon again.
+ *
+ * The timing can be a little tricky. Try loading the module with debug=1
+ * to have the kernel print out messages about the remote control number
+ * and mask. Note: debugging prints remote numbers as zero-based hexadecimal.
+ *
+ * The driver has a "channel_mask" parameter. This bitmask specifies which
+ * channels will be ignored by the module. To mask out channels, just add
+ * all the 2^channel_number values together.
+ *
+ * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote
+ * ignore signals coming from remote controls transmitting on channel 4, but
+ * accept all other channels.
+ *
+ * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
+ * ignored.
+ *
+ * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
+ * parameter are unused.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/usb/input.h>
+#include <linux/wait.h>
+#include <linux/jiffies.h>
+
+/*
+ * Module and Version Information, Module Parameters
+ */
+
+#define ATI_REMOTE_VENDOR_ID 0x0bc7
+#define ATI_REMOTE_PRODUCT_ID 0x004
+#define LOLA_REMOTE_PRODUCT_ID 0x002
+#define MEDION_REMOTE_PRODUCT_ID 0x006
+
+#define DRIVER_VERSION "2.2.1"
+#define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>"
+#define DRIVER_DESC "ATI/X10 RF USB Remote Control"
+
+#define NAME_BUFSIZE 80 /* size of product name, path buffers */
+#define DATA_BUFSIZE 63 /* size of URB data buffers */
+
+/*
+ * Duplicate event filtering time.
+ * Sequential, identical KIND_FILTERED inputs with less than
+ * FILTER_TIME milliseconds between them are considered as repeat
+ * events. The hardware generates 5 events for the first keypress
+ * and we have to take this into account for an accurate repeat
+ * behaviour.
+ */
+#define FILTER_TIME 60 /* msec */
+#define REPEAT_DELAY 500 /* msec */
+
+static unsigned long channel_mask;
+module_param(channel_mask, ulong, 0644);
+MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+
+static int repeat_filter = FILTER_TIME;
+module_param(repeat_filter, int, 0644);
+MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec");
+
+static int repeat_delay = REPEAT_DELAY;
+module_param(repeat_delay, int, 0644);
+MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec");
+
+#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
+#undef err
+#define err(format, arg...) printk(KERN_ERR format , ## arg)
+
+static struct usb_device_id ati_remote_table[] = {
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ati_remote_table);
+
+/* Get hi and low bytes of a 16-bits int */
+#define HI(a) ((unsigned char)((a) >> 8))
+#define LO(a) ((unsigned char)((a) & 0xff))
+
+#define SEND_FLAG_IN_PROGRESS 1
+#define SEND_FLAG_COMPLETE 2
+
+/* Device initialization strings */
+static char init1[] = { 0x01, 0x00, 0x20, 0x14 };
+static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
+
+struct ati_remote {
+ struct input_dev *idev;
+ struct usb_device *udev;
+ struct usb_interface *interface;
+
+ struct urb *irq_urb;
+ struct urb *out_urb;
+ struct usb_endpoint_descriptor *endpoint_in;
+ struct usb_endpoint_descriptor *endpoint_out;
+ unsigned char *inbuf;
+ unsigned char *outbuf;
+ dma_addr_t inbuf_dma;
+ dma_addr_t outbuf_dma;
+
+ unsigned char old_data[2]; /* Detect duplicate events */
+ unsigned long old_jiffies;
+ unsigned long acc_jiffies; /* handle acceleration */
+ unsigned long first_jiffies;
+
+ unsigned int repeat_count;
+
+ char name[NAME_BUFSIZE];
+ char phys[NAME_BUFSIZE];
+
+ wait_queue_head_t wait;
+ int send_flags;
+};
+
+/* "Kinds" of messages sent from the hardware to the driver. */
+#define KIND_END 0
+#define KIND_LITERAL 1 /* Simply pass to input system */
+#define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */
+#define KIND_LU 3 /* Directional keypad diagonals - left up, */
+#define KIND_RU 4 /* right up, */
+#define KIND_LD 5 /* left down, */
+#define KIND_RD 6 /* right down */
+#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/
+
+/* Translation table from hardware messages to input events. */
+static const struct {
+ short kind;
+ unsigned char data1, data2;
+ int type;
+ unsigned int code;
+ int value;
+} ati_remote_tbl[] = {
+ /* Directional control pad axes */
+ {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */
+ {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */
+ {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */
+ {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */
+ /* Directional control pad diagonals */
+ {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */
+ {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */
+ {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */
+ {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */
+
+ /* "Mouse button" buttons */
+ {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
+ {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
+ {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
+ {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
+
+ /* Artificial "doubleclick" events are generated by the hardware.
+ * They are mapped to the "side" and "extra" mouse buttons here. */
+ {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
+ {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
+
+ /* keyboard. */
+ {KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1},
+ {KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1},
+ {KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1},
+ {KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1},
+ {KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1},
+ {KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1},
+ {KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1},
+ {KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1},
+ {KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1},
+ {KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1},
+ {KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1},
+ {KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1},
+ {KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1},
+ {KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1},
+ {KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1},
+ {KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1},
+
+ /* "special" keys */
+ {KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1}, /* "check" */
+ {KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1}, /* "menu" */
+ {KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1}, /* Power */
+ {KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1}, /* TV */
+ {KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1}, /* DVD */
+ {KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1}, /* WEB */
+ {KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1}, /* "book" */
+ {KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1}, /* "hand" */
+ {KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1}, /* "timer" */
+ {KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1}, /* "max" */
+ {KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1}, /* left */
+ {KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1}, /* right */
+ {KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1}, /* down */
+ {KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1}, /* up */
+ {KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1}, /* "OK" */
+ {KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */
+ {KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1}, /* VOL - */
+ {KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1}, /* MUTE */
+ {KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1}, /* CH + */
+ {KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */
+ {KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1}, /* ( o) red */
+ {KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */
+ {KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */
+ {KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */
+ {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */
+ {KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */
+ {KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */
+ {KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */
+ {KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */
+ {KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */
+ {KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */
+ {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */
+
+ {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
+};
+
+/* Local function prototypes */
+static void ati_remote_dump (unsigned char *data, unsigned int actual_length);
+static int ati_remote_open (struct input_dev *inputdev);
+static void ati_remote_close (struct input_dev *inputdev);
+static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
+static void ati_remote_irq_out (struct urb *urb);
+static void ati_remote_irq_in (struct urb *urb);
+static void ati_remote_input_report (struct urb *urb);
+static int ati_remote_initialize (struct ati_remote *ati_remote);
+static int ati_remote_probe (struct usb_interface *interface, const struct usb_device_id *id);
+static void ati_remote_disconnect (struct usb_interface *interface);
+
+/* usb specific object to register with the usb subsystem */
+static struct usb_driver ati_remote_driver = {
+ .name = "ati_remote",
+ .probe = ati_remote_probe,
+ .disconnect = ati_remote_disconnect,
+ .id_table = ati_remote_table,
+};
+
+/*
+ * ati_remote_dump_input
+ */
+static void ati_remote_dump(unsigned char *data, unsigned int len)
+{
+ if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
+ warn("Weird byte 0x%02x", data[0]);
+ else if (len == 4)
+ warn("Weird key %02x %02x %02x %02x",
+ data[0], data[1], data[2], data[3]);
+ else
+ warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...",
+ len, data[0], data[1], data[2], data[3], data[4], data[5]);
+}
+
+/*
+ * ati_remote_open
+ */
+static int ati_remote_open(struct input_dev *inputdev)
+{
+ struct ati_remote *ati_remote = input_get_drvdata(inputdev);
+
+ /* On first open, submit the read urb which was set up previously. */
+ ati_remote->irq_urb->dev = ati_remote->udev;
+ if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
+ dev_err(&ati_remote->interface->dev,
+ "%s: usb_submit_urb failed!\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * ati_remote_close
+ */
+static void ati_remote_close(struct input_dev *inputdev)
+{
+ struct ati_remote *ati_remote = input_get_drvdata(inputdev);
+
+ usb_kill_urb(ati_remote->irq_urb);
+}
+
+/*
+ * ati_remote_irq_out
+ */
+static void ati_remote_irq_out(struct urb *urb)
+{
+ struct ati_remote *ati_remote = urb->context;
+
+ if (urb->status) {
+ dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
+ __FUNCTION__, urb->status);
+ return;
+ }
+
+ ati_remote->send_flags |= SEND_FLAG_COMPLETE;
+ wmb();
+ wake_up(&ati_remote->wait);
+}
+
+/*
+ * ati_remote_sendpacket
+ *
+ * Used to send device initialization strings
+ */
+static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data)
+{
+ int retval = 0;
+
+ /* Set up out_urb */
+ memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd));
+ ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
+
+ ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1;
+ ati_remote->out_urb->dev = ati_remote->udev;
+ ati_remote->send_flags = SEND_FLAG_IN_PROGRESS;
+
+ retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC);
+ if (retval) {
+ dev_dbg(&ati_remote->interface->dev,
+ "sendpacket: usb_submit_urb failed: %d\n", retval);
+ return retval;
+ }
+
+ wait_event_timeout(ati_remote->wait,
+ ((ati_remote->out_urb->status != -EINPROGRESS) ||
+ (ati_remote->send_flags & SEND_FLAG_COMPLETE)),
+ HZ);
+ usb_kill_urb(ati_remote->out_urb);
+
+ return retval;
+}
+
+/*
+ * ati_remote_event_lookup
+ */
+static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
+{
+ int i;
+
+ for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
+ /*
+ * Decide if the table entry matches the remote input.
+ */
+ if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) &&
+ ((((ati_remote_tbl[i].data1 >> 4) -
+ (d1 >> 4) + rem) & 0x0f) == 0x0f) &&
+ (ati_remote_tbl[i].data2 == d2))
+ return i;
+
+ }
+ return -1;
+}
+
+/*
+ * ati_remote_compute_accel
+ *
+ * Implements acceleration curve for directional control pad
+ * If elapsed time since last event is > 1/4 second, user "stopped",
+ * so reset acceleration. Otherwise, user is probably holding the control
+ * pad down, so we increase acceleration, ramping up over two seconds to
+ * a maximum speed.
+ */
+static int ati_remote_compute_accel(struct ati_remote *ati_remote)
+{
+ static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
+ unsigned long now = jiffies;
+ int acc;
+
+ if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) {
+ acc = 1;
+ ati_remote->acc_jiffies = now;
+ }
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125)))
+ acc = accel[0];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250)))
+ acc = accel[1];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500)))
+ acc = accel[2];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000)))
+ acc = accel[3];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500)))
+ acc = accel[4];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000)))
+ acc = accel[5];
+ else
+ acc = accel[6];
+
+ return acc;
+}
+
+/*
+ * ati_remote_report_input
+ */
+static void ati_remote_input_report(struct urb *urb)
+{
+ struct ati_remote *ati_remote = urb->context;
+ unsigned char *data= ati_remote->inbuf;
+ struct input_dev *dev = ati_remote->idev;
+ int index, acc;
+ int remote_num;
+
+ /* Deal with strange looking inputs */
+ if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
+ ((data[3] & 0x0f) != 0x00) ) {
+ ati_remote_dump(data, urb->actual_length);
+ return;
+ }
+
+ /* Mask unwanted remote channels. */
+ /* note: remote_num is 0-based, channel 1 on remote == 0 here */
+ remote_num = (data[3] >> 4) & 0x0f;
+ if (channel_mask & (1 << (remote_num + 1))) {
+ dbginfo(&ati_remote->interface->dev,
+ "Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
+ remote_num, data[1], data[2], channel_mask);
+ return;
+ }
+
+ /* Look up event code index in translation table */
+ index = ati_remote_event_lookup(remote_num, data[1], data[2]);
+ if (index < 0) {
+ dev_warn(&ati_remote->interface->dev,
+ "Unknown input from channel 0x%02x: data %02x,%02x\n",
+ remote_num, data[1], data[2]);
+ return;
+ }
+ dbginfo(&ati_remote->interface->dev,
+ "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
+ remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
+
+ if (ati_remote_tbl[index].kind == KIND_LITERAL) {
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code,
+ ati_remote_tbl[index].value);
+ input_sync(dev);
+
+ ati_remote->old_jiffies = jiffies;
+ return;
+ }
+
+ if (ati_remote_tbl[index].kind == KIND_FILTERED) {
+ unsigned long now = jiffies;
+
+ /* Filter duplicate events which happen "too close" together. */
+ if (ati_remote->old_data[0] == data[1] &&
+ ati_remote->old_data[1] == data[2] &&
+ time_before(now, ati_remote->old_jiffies +
+ msecs_to_jiffies(repeat_filter))) {
+ ati_remote->repeat_count++;
+ } else {
+ ati_remote->repeat_count = 0;
+ ati_remote->first_jiffies = now;
+ }
+
+ ati_remote->old_data[0] = data[1];
+ ati_remote->old_data[1] = data[2];
+ ati_remote->old_jiffies = now;
+
+ /* Ensure we skip at least the 4 first duplicate events (generated
+ * by a single keypress), and continue skipping until repeat_delay
+ * msecs have passed
+ */
+ if (ati_remote->repeat_count > 0 &&
+ (ati_remote->repeat_count < 5 ||
+ time_before(now, ati_remote->first_jiffies +
+ msecs_to_jiffies(repeat_delay))))
+ return;
+
+
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code, 1);
+ input_sync(dev);
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code, 0);
+ input_sync(dev);
+
+ } else {
+
+ /*
+ * Other event kinds are from the directional control pad, and have an
+ * acceleration factor applied to them. Without this acceleration, the
+ * control pad is mostly unusable.
+ */
+ acc = ati_remote_compute_accel(ati_remote);
+
+ switch (ati_remote_tbl[index].kind) {
+ case KIND_ACCEL:
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code,
+ ati_remote_tbl[index].value * acc);
+ break;
+ case KIND_LU:
+ input_report_rel(dev, REL_X, -acc);
+ input_report_rel(dev, REL_Y, -acc);
+ break;
+ case KIND_RU:
+ input_report_rel(dev, REL_X, acc);
+ input_report_rel(dev, REL_Y, -acc);
+ break;
+ case KIND_LD:
+ input_report_rel(dev, REL_X, -acc);
+ input_report_rel(dev, REL_Y, acc);
+ break;
+ case KIND_RD:
+ input_report_rel(dev, REL_X, acc);
+ input_report_rel(dev, REL_Y, acc);
+ break;
+ default:
+ dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
+ ati_remote_tbl[index].kind);
+ }
+ input_sync(dev);
+
+ ati_remote->old_jiffies = jiffies;
+ ati_remote->old_data[0] = data[1];
+ ati_remote->old_data[1] = data[2];
+ }
+}
+
+/*
+ * ati_remote_irq_in
+ */
+static void ati_remote_irq_in(struct urb *urb)
+{
+ struct ati_remote *ati_remote = urb->context;
+ int retval;
+
+ switch (urb->status) {
+ case 0: /* success */
+ ati_remote_input_report(urb);
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n",
+ __FUNCTION__);
+ return;
+ default: /* error */
+ dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
+ __FUNCTION__, urb->status);
+ }
+
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
+ __FUNCTION__, retval);
+}
+
+/*
+ * ati_remote_alloc_buffers
+ */
+static int ati_remote_alloc_buffers(struct usb_device *udev,
+ struct ati_remote *ati_remote)
+{
+ ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
+ &ati_remote->inbuf_dma);
+ if (!ati_remote->inbuf)
+ return -1;
+
+ ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
+ &ati_remote->outbuf_dma);
+ if (!ati_remote->outbuf)
+ return -1;
+
+ ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ati_remote->irq_urb)
+ return -1;
+
+ ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ati_remote->out_urb)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * ati_remote_free_buffers
+ */
+static void ati_remote_free_buffers(struct ati_remote *ati_remote)
+{
+ usb_free_urb(ati_remote->irq_urb);
+ usb_free_urb(ati_remote->out_urb);
+
+ usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
+ ati_remote->inbuf, ati_remote->inbuf_dma);
+
+ usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
+ ati_remote->outbuf, ati_remote->outbuf_dma);
+}
+
+static void ati_remote_input_init(struct ati_remote *ati_remote)
+{
+ struct input_dev *idev = ati_remote->idev;
+ int i;
+
+ idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ idev->keybit[LONG(BTN_MOUSE)] = ( BIT(BTN_LEFT) | BIT(BTN_RIGHT) |
+ BIT(BTN_SIDE) | BIT(BTN_EXTRA) );
+ idev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++)
+ if (ati_remote_tbl[i].type == EV_KEY)
+ set_bit(ati_remote_tbl[i].code, idev->keybit);
+
+ input_set_drvdata(idev, ati_remote);
+
+ idev->open = ati_remote_open;
+ idev->close = ati_remote_close;
+
+ idev->name = ati_remote->name;
+ idev->phys = ati_remote->phys;
+
+ usb_to_input_id(ati_remote->udev, &idev->id);
+ idev->dev.parent = &ati_remote->udev->dev;
+}
+
+static int ati_remote_initialize(struct ati_remote *ati_remote)
+{
+ struct usb_device *udev = ati_remote->udev;
+ int pipe, maxp;
+
+ init_waitqueue_head(&ati_remote->wait);
+
+ /* Set up irq_urb */
+ pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
+
+ usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf,
+ maxp, ati_remote_irq_in, ati_remote,
+ ati_remote->endpoint_in->bInterval);
+ ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma;
+ ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* Set up out_urb */
+ pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
+
+ usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf,
+ maxp, ati_remote_irq_out, ati_remote,
+ ati_remote->endpoint_out->bInterval);
+ ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma;
+ ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* send initialization strings */
+ if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) ||
+ (ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
+ dev_err(&ati_remote->interface->dev,
+ "Initializing ati_remote hardware failed.\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * ati_remote_probe
+ */
+static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct usb_host_interface *iface_host = interface->cur_altsetting;
+ struct usb_endpoint_descriptor *endpoint_in, *endpoint_out;
+ struct ati_remote *ati_remote;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+
+ if (iface_host->desc.bNumEndpoints != 2) {
+ err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__);
+ return -ENODEV;
+ }
+
+ endpoint_in = &iface_host->endpoint[0].desc;
+ endpoint_out = &iface_host->endpoint[1].desc;
+
+ if (!usb_endpoint_is_int_in(endpoint_in)) {
+ err("%s: Unexpected endpoint_in\n", __FUNCTION__);
+ return -ENODEV;
+ }
+ if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
+ err("%s: endpoint_in message size==0? \n", __FUNCTION__);
+ return -ENODEV;
+ }
+
+ ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ati_remote || !input_dev)
+ goto fail1;
+
+ /* Allocate URB buffers, URBs */
+ if (ati_remote_alloc_buffers(udev, ati_remote))
+ goto fail2;
+
+ ati_remote->endpoint_in = endpoint_in;
+ ati_remote->endpoint_out = endpoint_out;
+ ati_remote->udev = udev;
+ ati_remote->idev = input_dev;
+ ati_remote->interface = interface;
+
+ usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
+ strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
+
+ if (udev->manufacturer)
+ strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
+
+ if (udev->product)
+ snprintf(ati_remote->name, sizeof(ati_remote->name),
+ "%s %s", ati_remote->name, udev->product);
+
+ if (!strlen(ati_remote->name))
+ snprintf(ati_remote->name, sizeof(ati_remote->name),
+ DRIVER_DESC "(%04x,%04x)",
+ le16_to_cpu(ati_remote->udev->descriptor.idVendor),
+ le16_to_cpu(ati_remote->udev->descriptor.idProduct));
+
+ ati_remote_input_init(ati_remote);
+
+ /* Device Hardware Initialization - fills in ati_remote->idev from udev. */
+ err = ati_remote_initialize(ati_remote);
+ if (err)
+ goto fail3;
+
+ /* Set up and register input device */
+ err = input_register_device(ati_remote->idev);
+ if (err)
+ goto fail3;
+
+ usb_set_intfdata(interface, ati_remote);
+ return 0;
+
+ fail3: usb_kill_urb(ati_remote->irq_urb);
+ usb_kill_urb(ati_remote->out_urb);
+ fail2: ati_remote_free_buffers(ati_remote);
+ fail1: input_free_device(input_dev);
+ kfree(ati_remote);
+ return err;
+}
+
+/*
+ * ati_remote_disconnect
+ */
+static void ati_remote_disconnect(struct usb_interface *interface)
+{
+ struct ati_remote *ati_remote;
+
+ ati_remote = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+ if (!ati_remote) {
+ warn("%s - null device?\n", __FUNCTION__);
+ return;
+ }
+
+ usb_kill_urb(ati_remote->irq_urb);
+ usb_kill_urb(ati_remote->out_urb);
+ input_unregister_device(ati_remote->idev);
+ ati_remote_free_buffers(ati_remote);
+ kfree(ati_remote);
+}
+
+/*
+ * ati_remote_init
+ */
+static int __init ati_remote_init(void)
+{
+ int result;
+
+ result = usb_register(&ati_remote_driver);
+ if (result)
+ err("usb_register error #%d\n", result);
+ else
+ info("Registered USB driver " DRIVER_DESC " v. " DRIVER_VERSION);
+
+ return result;
+}
+
+/*
+ * ati_remote_exit
+ */
+static void __exit ati_remote_exit(void)
+{
+ usb_deregister(&ati_remote_driver);
+}
+
+/*
+ * module specification
+ */
+
+module_init(ati_remote_init);
+module_exit(ati_remote_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
new file mode 100644
index 00000000000..1031543e5c3
--- /dev/null
+++ b/drivers/input/misc/ati_remote2.c
@@ -0,0 +1,543 @@
+/*
+ * ati_remote2 - ATI/Philips USB RF remote driver
+ *
+ * Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi>
+ * Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/usb/input.h>
+
+#define DRIVER_DESC "ATI/Philips USB RF remote driver"
+#define DRIVER_VERSION "0.2"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
+MODULE_LICENSE("GPL");
+
+/*
+ * ATI Remote Wonder II Channel Configuration
+ *
+ * The remote control can by assigned one of sixteen "channels" in order to facilitate
+ * the use of multiple remote controls within range of each other.
+ * A remote's "channel" may be altered by pressing and holding the "PC" button for
+ * approximately 3 seconds, after which the button will slowly flash the count of the
+ * currently configured "channel", using the numeric keypad enter a number between 1 and
+ * 16 and then the "PC" button again, the button will slowly flash the count of the
+ * newly configured "channel".
+ */
+
+static unsigned int channel_mask = 0xFFFF;
+module_param(channel_mask, uint, 0644);
+MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
+
+static unsigned int mode_mask = 0x1F;
+module_param(mode_mask, uint, 0644);
+MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
+
+static struct usb_device_id ati_remote2_id_table[] = {
+ { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
+ { }
+};
+MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
+
+static struct {
+ int hw_code;
+ int key_code;
+} ati_remote2_key_table[] = {
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+ { 0x0c, KEY_POWER },
+ { 0x0d, KEY_MUTE },
+ { 0x10, KEY_VOLUMEUP },
+ { 0x11, KEY_VOLUMEDOWN },
+ { 0x20, KEY_CHANNELUP },
+ { 0x21, KEY_CHANNELDOWN },
+ { 0x28, KEY_FORWARD },
+ { 0x29, KEY_REWIND },
+ { 0x2c, KEY_PLAY },
+ { 0x30, KEY_PAUSE },
+ { 0x31, KEY_STOP },
+ { 0x37, KEY_RECORD },
+ { 0x38, KEY_DVD },
+ { 0x39, KEY_TV },
+ { 0x54, KEY_MENU },
+ { 0x58, KEY_UP },
+ { 0x59, KEY_DOWN },
+ { 0x5a, KEY_LEFT },
+ { 0x5b, KEY_RIGHT },
+ { 0x5c, KEY_OK },
+ { 0x78, KEY_A },
+ { 0x79, KEY_B },
+ { 0x7a, KEY_C },
+ { 0x7b, KEY_D },
+ { 0x7c, KEY_E },
+ { 0x7d, KEY_F },
+ { 0x82, KEY_ENTER },
+ { 0x8e, KEY_VENDOR },
+ { 0x96, KEY_COFFEE },
+ { 0xa9, BTN_LEFT },
+ { 0xaa, BTN_RIGHT },
+ { 0xbe, KEY_QUESTION },
+ { 0xd5, KEY_FRONT },
+ { 0xd0, KEY_EDIT },
+ { 0xf9, KEY_INFO },
+ { (0x00 << 8) | 0x3f, KEY_PROG1 },
+ { (0x01 << 8) | 0x3f, KEY_PROG2 },
+ { (0x02 << 8) | 0x3f, KEY_PROG3 },
+ { (0x03 << 8) | 0x3f, KEY_PROG4 },
+ { (0x04 << 8) | 0x3f, KEY_PC },
+ { 0, KEY_RESERVED }
+};
+
+struct ati_remote2 {
+ struct input_dev *idev;
+ struct usb_device *udev;
+
+ struct usb_interface *intf[2];
+ struct usb_endpoint_descriptor *ep[2];
+ struct urb *urb[2];
+ void *buf[2];
+ dma_addr_t buf_dma[2];
+
+ unsigned long jiffies;
+ int mode;
+
+ char name[64];
+ char phys[64];
+};
+
+static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
+static void ati_remote2_disconnect(struct usb_interface *interface);
+
+static struct usb_driver ati_remote2_driver = {
+ .name = "ati_remote2",
+ .probe = ati_remote2_probe,
+ .disconnect = ati_remote2_disconnect,
+ .id_table = ati_remote2_id_table,
+};
+
+static int ati_remote2_open(struct input_dev *idev)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+ int r;
+
+ r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
+ if (r) {
+ dev_err(&ar2->intf[0]->dev,
+ "%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
+ return r;
+ }
+ r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
+ if (r) {
+ usb_kill_urb(ar2->urb[0]);
+ dev_err(&ar2->intf[1]->dev,
+ "%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
+ return r;
+ }
+
+ return 0;
+}
+
+static void ati_remote2_close(struct input_dev *idev)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+
+ usb_kill_urb(ar2->urb[0]);
+ usb_kill_urb(ar2->urb[1]);
+}
+
+static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
+{
+ struct input_dev *idev = ar2->idev;
+ u8 *data = ar2->buf[0];
+ int channel, mode;
+
+ channel = data[0] >> 4;
+
+ if (!((1 << channel) & channel_mask))
+ return;
+
+ mode = data[0] & 0x0F;
+
+ if (mode > 4) {
+ dev_err(&ar2->intf[0]->dev,
+ "Unknown mode byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ if (!((1 << mode) & mode_mask))
+ return;
+
+ input_event(idev, EV_REL, REL_X, (s8) data[1]);
+ input_event(idev, EV_REL, REL_Y, (s8) data[2]);
+ input_sync(idev);
+}
+
+static int ati_remote2_lookup(unsigned int hw_code)
+{
+ int i;
+
+ for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
+ if (ati_remote2_key_table[i].hw_code == hw_code)
+ return i;
+
+ return -1;
+}
+
+static void ati_remote2_input_key(struct ati_remote2 *ar2)
+{
+ struct input_dev *idev = ar2->idev;
+ u8 *data = ar2->buf[1];
+ int channel, mode, hw_code, index;
+
+ channel = data[0] >> 4;
+
+ if (!((1 << channel) & channel_mask))
+ return;
+
+ mode = data[0] & 0x0F;
+
+ if (mode > 4) {
+ dev_err(&ar2->intf[1]->dev,
+ "Unknown mode byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ hw_code = data[2];
+ /*
+ * Mode keys (AUX1-AUX4, PC) all generate the same code byte.
+ * Use the mode byte to figure out which one was pressed.
+ */
+ if (hw_code == 0x3f) {
+ /*
+ * For some incomprehensible reason the mouse pad generates
+ * events which look identical to the events from the last
+ * pressed mode key. Naturally we don't want to generate key
+ * events for the mouse pad so we filter out any subsequent
+ * events from the same mode key.
+ */
+ if (ar2->mode == mode)
+ return;
+
+ if (data[1] == 0)
+ ar2->mode = mode;
+
+ hw_code |= mode << 8;
+ }
+
+ if (!((1 << mode) & mode_mask))
+ return;
+
+ index = ati_remote2_lookup(hw_code);
+ if (index < 0) {
+ dev_err(&ar2->intf[1]->dev,
+ "Unknown code byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ switch (data[1]) {
+ case 0: /* release */
+ break;
+ case 1: /* press */
+ ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
+ break;
+ case 2: /* repeat */
+
+ /* No repeat for mouse buttons. */
+ if (ati_remote2_key_table[index].key_code == BTN_LEFT ||
+ ati_remote2_key_table[index].key_code == BTN_RIGHT)
+ return;
+
+ if (!time_after_eq(jiffies, ar2->jiffies))
+ return;
+
+ ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
+ break;
+ default:
+ dev_err(&ar2->intf[1]->dev,
+ "Unknown state byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]);
+ input_sync(idev);
+}
+
+static void ati_remote2_complete_mouse(struct urb *urb)
+{
+ struct ati_remote2 *ar2 = urb->context;
+ int r;
+
+ switch (urb->status) {
+ case 0:
+ ati_remote2_input_mouse(ar2);
+ break;
+ case -ENOENT:
+ case -EILSEQ:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev_dbg(&ar2->intf[0]->dev,
+ "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ return;
+ default:
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ }
+
+ r = usb_submit_urb(urb, GFP_ATOMIC);
+ if (r)
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
+}
+
+static void ati_remote2_complete_key(struct urb *urb)
+{
+ struct ati_remote2 *ar2 = urb->context;
+ int r;
+
+ switch (urb->status) {
+ case 0:
+ ati_remote2_input_key(ar2);
+ break;
+ case -ENOENT:
+ case -EILSEQ:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev_dbg(&ar2->intf[1]->dev,
+ "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ return;
+ default:
+ dev_err(&ar2->intf[1]->dev,
+ "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ }
+
+ r = usb_submit_urb(urb, GFP_ATOMIC);
+ if (r)
+ dev_err(&ar2->intf[1]->dev,
+ "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
+}
+
+static int ati_remote2_input_init(struct ati_remote2 *ar2)
+{
+ struct input_dev *idev;
+ int i, retval;
+
+ idev = input_allocate_device();
+ if (!idev)
+ return -ENOMEM;
+
+ ar2->idev = idev;
+ input_set_drvdata(idev, ar2);
+
+ idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL);
+ idev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+ idev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
+ set_bit(ati_remote2_key_table[i].key_code, idev->keybit);
+
+ idev->rep[REP_DELAY] = 250;
+ idev->rep[REP_PERIOD] = 33;
+
+ idev->open = ati_remote2_open;
+ idev->close = ati_remote2_close;
+
+ idev->name = ar2->name;
+ idev->phys = ar2->phys;
+
+ usb_to_input_id(ar2->udev, &idev->id);
+ idev->dev.parent = &ar2->udev->dev;
+
+ retval = input_register_device(idev);
+ if (retval)
+ input_free_device(idev);
+
+ return retval;
+}
+
+static int ati_remote2_urb_init(struct ati_remote2 *ar2)
+{
+ struct usb_device *udev = ar2->udev;
+ int i, pipe, maxp;
+
+ for (i = 0; i < 2; i++) {
+ ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
+ if (!ar2->buf[i])
+ return -ENOMEM;
+
+ ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ar2->urb[i])
+ return -ENOMEM;
+
+ pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ maxp = maxp > 4 ? 4 : maxp;
+
+ usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
+ i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
+ ar2, ar2->ep[i]->bInterval);
+ ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
+ ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ }
+
+ return 0;
+}
+
+static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ usb_free_urb(ar2->urb[i]);
+ usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
+ }
+}
+
+static int ati_remote2_setup(struct ati_remote2 *ar2)
+{
+ int r, i, channel;
+
+ /*
+ * Configure receiver to only accept input from remote "channel"
+ * channel == 0 -> Accept input from any remote channel
+ * channel == 1 -> Only accept input from remote channel 1
+ * channel == 2 -> Only accept input from remote channel 2
+ * ...
+ * channel == 16 -> Only accept input from remote channel 16
+ */
+
+ channel = 0;
+ for (i = 0; i < 16; i++) {
+ if ((1 << i) & channel_mask) {
+ if (!(~(1 << i) & 0xFFFF & channel_mask))
+ channel = i + 1;
+ break;
+ }
+ }
+
+ r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
+ 0x20,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (r) {
+ dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
+ __FUNCTION__, r);
+ return r;
+ }
+
+ return 0;
+}
+
+static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct usb_host_interface *alt = interface->cur_altsetting;
+ struct ati_remote2 *ar2;
+ int r;
+
+ if (alt->desc.bInterfaceNumber)
+ return -ENODEV;
+
+ ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
+ if (!ar2)
+ return -ENOMEM;
+
+ ar2->udev = udev;
+
+ ar2->intf[0] = interface;
+ ar2->ep[0] = &alt->endpoint[0].desc;
+
+ ar2->intf[1] = usb_ifnum_to_if(udev, 1);
+ r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
+ if (r)
+ goto fail1;
+ alt = ar2->intf[1]->cur_altsetting;
+ ar2->ep[1] = &alt->endpoint[0].desc;
+
+ r = ati_remote2_urb_init(ar2);
+ if (r)
+ goto fail2;
+
+ r = ati_remote2_setup(ar2);
+ if (r)
+ goto fail2;
+
+ usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
+ strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
+
+ strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
+
+ r = ati_remote2_input_init(ar2);
+ if (r)
+ goto fail2;
+
+ usb_set_intfdata(interface, ar2);
+
+ return 0;
+
+ fail2:
+ ati_remote2_urb_cleanup(ar2);
+
+ usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
+ fail1:
+ kfree(ar2);
+
+ return r;
+}
+
+static void ati_remote2_disconnect(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+
+ if (alt->desc.bInterfaceNumber)
+ return;
+
+ ar2 = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ input_unregister_device(ar2->idev);
+
+ ati_remote2_urb_cleanup(ar2);
+
+ usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
+
+ kfree(ar2);
+}
+
+static int __init ati_remote2_init(void)
+{
+ int r;
+
+ r = usb_register(&ati_remote2_driver);
+ if (r)
+ printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
+ else
+ printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n");
+
+ return r;
+}
+
+static void __exit ati_remote2_exit(void)
+{
+ usb_deregister(&ati_remote2_driver);
+}
+
+module_init(ati_remote2_init);
+module_exit(ati_remote2_exit);
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
new file mode 100644
index 00000000000..1bffc9fa98c
--- /dev/null
+++ b/drivers/input/misc/keyspan_remote.c
@@ -0,0 +1,592 @@
+/*
+ * keyspan_remote: USB driver for the Keyspan DMR
+ *
+ * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ * This driver has been put together with the support of Innosys, Inc.
+ * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/usb/input.h>
+
+#define DRIVER_VERSION "v0.1"
+#define DRIVER_AUTHOR "Michael Downey <downey@zymeta.com>"
+#define DRIVER_DESC "Driver for the USB Keyspan remote control."
+#define DRIVER_LICENSE "GPL"
+
+/* Parameters that can be passed to the driver. */
+static int debug;
+module_param(debug, int, 0444);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+
+/* Vendor and product ids */
+#define USB_KEYSPAN_VENDOR_ID 0x06CD
+#define USB_KEYSPAN_PRODUCT_UIA11 0x0202
+
+/* Defines for converting the data from the remote. */
+#define ZERO 0x18
+#define ZERO_MASK 0x1F /* 5 bits for a 0 */
+#define ONE 0x3C
+#define ONE_MASK 0x3F /* 6 bits for a 1 */
+#define SYNC 0x3F80
+#define SYNC_MASK 0x3FFF /* 14 bits for a SYNC sequence */
+#define STOP 0x00
+#define STOP_MASK 0x1F /* 5 bits for the STOP sequence */
+#define GAP 0xFF
+
+#define RECV_SIZE 8 /* The UIA-11 type have a 8 byte limit. */
+
+/* table of devices that work with this driver */
+static struct usb_device_id keyspan_table[] = {
+ { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
+ { } /* Terminating entry */
+};
+
+/* Structure to store all the real stuff that a remote sends to us. */
+struct keyspan_message {
+ u16 system;
+ u8 button;
+ u8 toggle;
+};
+
+/* Structure used for all the bit testing magic needed to be done. */
+struct bit_tester {
+ u32 tester;
+ int len;
+ int pos;
+ int bits_left;
+ u8 buffer[32];
+};
+
+/* Structure to hold all of our driver specific stuff */
+struct usb_keyspan {
+ char name[128];
+ char phys[64];
+ struct usb_device* udev;
+ struct input_dev *input;
+ struct usb_interface* interface;
+ struct usb_endpoint_descriptor* in_endpoint;
+ struct urb* irq_urb;
+ int open;
+ dma_addr_t in_dma;
+ unsigned char* in_buffer;
+
+ /* variables used to parse messages from remote. */
+ struct bit_tester data;
+ int stage;
+ int toggle;
+};
+
+/*
+ * Table that maps the 31 possible keycodes to input keys.
+ * Currently there are 15 and 17 button models so RESERVED codes
+ * are blank areas in the mapping.
+ */
+static const int keyspan_key_table[] = {
+ KEY_RESERVED, /* 0 is just a place holder. */
+ KEY_RESERVED,
+ KEY_STOP,
+ KEY_PLAYCD,
+ KEY_RESERVED,
+ KEY_PREVIOUSSONG,
+ KEY_REWIND,
+ KEY_FORWARD,
+ KEY_NEXTSONG,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_PAUSE,
+ KEY_VOLUMEUP,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_VOLUMEDOWN,
+ KEY_RESERVED,
+ KEY_UP,
+ KEY_RESERVED,
+ KEY_MUTE,
+ KEY_LEFT,
+ KEY_ENTER,
+ KEY_RIGHT,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_DOWN,
+ KEY_RESERVED,
+ KEY_KPASTERISK,
+ KEY_RESERVED,
+ KEY_MENU
+};
+
+static struct usb_driver keyspan_driver;
+
+/*
+ * Debug routine that prints out what we've received from the remote.
+ */
+static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
+{
+ char codes[4 * RECV_SIZE];
+ int i;
+
+ for (i = 0; i < RECV_SIZE; i++)
+ snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
+
+ dev_info(&dev->udev->dev, "%s\n", codes);
+}
+
+/*
+ * Routine that manages the bit_tester structure. It makes sure that there are
+ * at least bits_needed bits loaded into the tester.
+ */
+static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
+{
+ if (dev->data.bits_left >= bits_needed)
+ return 0;
+
+ /*
+ * Somehow we've missed the last message. The message will be repeated
+ * though so it's not too big a deal
+ */
+ if (dev->data.pos >= dev->data.len) {
+ dev_dbg(&dev->udev->dev,
+ "%s - Error ran out of data. pos: %d, len: %d\n",
+ __FUNCTION__, dev->data.pos, dev->data.len);
+ return -1;
+ }
+
+ /* Load as much as we can into the tester. */
+ while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
+ (dev->data.pos < dev->data.len)) {
+ dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
+ dev->data.bits_left += 8;
+ }
+
+ return 0;
+}
+
+/*
+ * Routine that handles all the logic needed to parse out the message from the remote.
+ */
+static void keyspan_check_data(struct usb_keyspan *remote)
+{
+ int i;
+ int found = 0;
+ struct keyspan_message message;
+
+ switch(remote->stage) {
+ case 0:
+ /*
+ * In stage 0 we want to find the start of a message. The remote sends a 0xFF as filler.
+ * So the first byte that isn't a FF should be the start of a new message.
+ */
+ for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
+
+ if (i < RECV_SIZE) {
+ memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
+ remote->data.len = RECV_SIZE;
+ remote->data.pos = 0;
+ remote->data.tester = 0;
+ remote->data.bits_left = 0;
+ remote->stage = 1;
+ }
+ break;
+
+ case 1:
+ /*
+ * Stage 1 we should have 16 bytes and should be able to detect a
+ * SYNC. The SYNC is 14 bits, 7 0's and then 7 1's.
+ */
+ memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
+ remote->data.len += RECV_SIZE;
+
+ found = 0;
+ while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
+ for (i = 0; i < 8; ++i) {
+ if (keyspan_load_tester(remote, 14) != 0) {
+ remote->stage = 0;
+ return;
+ }
+
+ if ((remote->data.tester & SYNC_MASK) == SYNC) {
+ remote->data.tester = remote->data.tester >> 14;
+ remote->data.bits_left -= 14;
+ found = 1;
+ break;
+ } else {
+ remote->data.tester = remote->data.tester >> 1;
+ --remote->data.bits_left;
+ }
+ }
+ }
+
+ if (!found) {
+ remote->stage = 0;
+ remote->data.len = 0;
+ } else {
+ remote->stage = 2;
+ }
+ break;
+
+ case 2:
+ /*
+ * Stage 2 we should have 24 bytes which will be enough for a full
+ * message. We need to parse out the system code, button code,
+ * toggle code, and stop.
+ */
+ memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
+ remote->data.len += RECV_SIZE;
+
+ message.system = 0;
+ for (i = 0; i < 9; i++) {
+ keyspan_load_tester(remote, 6);
+
+ if ((remote->data.tester & ZERO_MASK) == ZERO) {
+ message.system = message.system << 1;
+ remote->data.tester = remote->data.tester >> 5;
+ remote->data.bits_left -= 5;
+ } else if ((remote->data.tester & ONE_MASK) == ONE) {
+ message.system = (message.system << 1) + 1;
+ remote->data.tester = remote->data.tester >> 6;
+ remote->data.bits_left -= 6;
+ } else {
+ err("%s - Unknown sequence found in system data.\n", __FUNCTION__);
+ remote->stage = 0;
+ return;
+ }
+ }
+
+ message.button = 0;
+ for (i = 0; i < 5; i++) {
+ keyspan_load_tester(remote, 6);
+
+ if ((remote->data.tester & ZERO_MASK) == ZERO) {
+ message.button = message.button << 1;
+ remote->data.tester = remote->data.tester >> 5;
+ remote->data.bits_left -= 5;
+ } else if ((remote->data.tester & ONE_MASK) == ONE) {
+ message.button = (message.button << 1) + 1;
+ remote->data.tester = remote->data.tester >> 6;
+ remote->data.bits_left -= 6;
+ } else {
+ err("%s - Unknown sequence found in button data.\n", __FUNCTION__);
+ remote->stage = 0;
+ return;
+ }
+ }
+
+ keyspan_load_tester(remote, 6);
+ if ((remote->data.tester & ZERO_MASK) == ZERO) {
+ message.toggle = 0;
+ remote->data.tester = remote->data.tester >> 5;
+ remote->data.bits_left -= 5;
+ } else if ((remote->data.tester & ONE_MASK) == ONE) {
+ message.toggle = 1;
+ remote->data.tester = remote->data.tester >> 6;
+ remote->data.bits_left -= 6;
+ } else {
+ err("%s - Error in message, invalid toggle.\n", __FUNCTION__);
+ remote->stage = 0;
+ return;
+ }
+
+ keyspan_load_tester(remote, 5);
+ if ((remote->data.tester & STOP_MASK) == STOP) {
+ remote->data.tester = remote->data.tester >> 5;
+ remote->data.bits_left -= 5;
+ } else {
+ err("Bad message recieved, no stop bit found.\n");
+ }
+
+ dev_dbg(&remote->udev->dev,
+ "%s found valid message: system: %d, button: %d, toggle: %d\n",
+ __FUNCTION__, message.system, message.button, message.toggle);
+
+ if (message.toggle != remote->toggle) {
+ input_report_key(remote->input, keyspan_key_table[message.button], 1);
+ input_report_key(remote->input, keyspan_key_table[message.button], 0);
+ input_sync(remote->input);
+ remote->toggle = message.toggle;
+ }
+
+ remote->stage = 0;
+ break;
+ }
+}
+
+/*
+ * Routine for sending all the initialization messages to the remote.
+ */
+static int keyspan_setup(struct usb_device* dev)
+{
+ int retval = 0;
+
+ retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
+ if (retval) {
+ dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
+ __FUNCTION__, retval);
+ return(retval);
+ }
+
+ retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
+ if (retval) {
+ dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
+ __FUNCTION__, retval);
+ return(retval);
+ }
+
+ retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
+ if (retval) {
+ dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
+ __FUNCTION__, retval);
+ return(retval);
+ }
+
+ dev_dbg(&dev->dev, "%s - Setup complete.\n", __FUNCTION__);
+ return(retval);
+}
+
+/*
+ * Routine used to handle a new message that has come in.
+ */
+static void keyspan_irq_recv(struct urb *urb)
+{
+ struct usb_keyspan *dev = urb->context;
+ int retval;
+
+ /* Check our status in case we need to bail out early. */
+ switch (urb->status) {
+ case 0:
+ break;
+
+ /* Device went away so don't keep trying to read from it. */
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+
+ default:
+ goto resubmit;
+ break;
+ }
+
+ if (debug)
+ keyspan_print(dev);
+
+ keyspan_check_data(dev);
+
+resubmit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ err ("%s - usb_submit_urb failed with result: %d", __FUNCTION__, retval);
+}
+
+static int keyspan_open(struct input_dev *dev)
+{
+ struct usb_keyspan *remote = input_get_drvdata(dev);
+
+ remote->irq_urb->dev = remote->udev;
+ if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void keyspan_close(struct input_dev *dev)
+{
+ struct usb_keyspan *remote = input_get_drvdata(dev);
+
+ usb_kill_urb(remote->irq_urb);
+}
+
+static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
+{
+
+ struct usb_endpoint_descriptor *endpoint;
+ int i;
+
+ for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
+ endpoint = &iface->endpoint[i].desc;
+
+ if (usb_endpoint_is_int_in(endpoint)) {
+ /* we found our interrupt in endpoint */
+ return endpoint;
+ }
+ }
+
+ return NULL;
+}
+
+/*
+ * Routine that sets up the driver to handle a specific USB device detected on the bus.
+ */
+static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_keyspan *remote;
+ struct input_dev *input_dev;
+ int i, error;
+
+ endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
+ if (!endpoint)
+ return -ENODEV;
+
+ remote = kzalloc(sizeof(*remote), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!remote || !input_dev) {
+ error = -ENOMEM;
+ goto fail1;
+ }
+
+ remote->udev = udev;
+ remote->input = input_dev;
+ remote->interface = interface;
+ remote->in_endpoint = endpoint;
+ remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */
+
+ remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
+ if (!remote->in_buffer) {
+ error = -ENOMEM;
+ goto fail1;
+ }
+
+ remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!remote->irq_urb) {
+ error = -ENOMEM;
+ goto fail2;
+ }
+
+ error = keyspan_setup(udev);
+ if (error) {
+ error = -ENODEV;
+ goto fail3;
+ }
+
+ if (udev->manufacturer)
+ strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(remote->name, " ", sizeof(remote->name));
+ strlcat(remote->name, udev->product, sizeof(remote->name));
+ }
+
+ if (!strlen(remote->name))
+ snprintf(remote->name, sizeof(remote->name),
+ "USB Keyspan Remote %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, remote->phys, sizeof(remote->phys));
+ strlcat(remote->phys, "/input0", sizeof(remote->phys));
+
+ input_dev->name = remote->name;
+ input_dev->phys = remote->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->dev.parent = &interface->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */
+ for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
+ if (keyspan_key_table[i] != KEY_RESERVED)
+ set_bit(keyspan_key_table[i], input_dev->keybit);
+
+ input_set_drvdata(input_dev, remote);
+
+ input_dev->open = keyspan_open;
+ input_dev->close = keyspan_close;
+
+ /*
+ * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open()
+ */
+ usb_fill_int_urb(remote->irq_urb,
+ remote->udev, usb_rcvintpipe(remote->udev, remote->in_endpoint->bEndpointAddress),
+ remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
+ remote->in_endpoint->bInterval);
+ remote->irq_urb->transfer_dma = remote->in_dma;
+ remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* we can register the device now, as it is ready */
+ error = input_register_device(remote->input);
+ if (error)
+ goto fail3;
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, remote);
+
+ return 0;
+
+ fail3: usb_free_urb(remote->irq_urb);
+ fail2: usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+ fail1: kfree(remote);
+ input_free_device(input_dev);
+
+ return error;
+}
+
+/*
+ * Routine called when a device is disconnected from the USB.
+ */
+static void keyspan_disconnect(struct usb_interface *interface)
+{
+ struct usb_keyspan *remote;
+
+ remote = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ if (remote) { /* We have a valid driver structure so clean up everything we allocated. */
+ input_unregister_device(remote->input);
+ usb_kill_urb(remote->irq_urb);
+ usb_free_urb(remote->irq_urb);
+ usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+ kfree(remote);
+ }
+}
+
+/*
+ * Standard driver set up sections
+ */
+static struct usb_driver keyspan_driver =
+{
+ .name = "keyspan_remote",
+ .probe = keyspan_probe,
+ .disconnect = keyspan_disconnect,
+ .id_table = keyspan_table
+};
+
+static int __init usb_keyspan_init(void)
+{
+ int result;
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&keyspan_driver);
+ if (result)
+ err("usb_register failed. Error number %d\n", result);
+
+ return result;
+}
+
+static void __exit usb_keyspan_exit(void)
+{
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&keyspan_driver);
+}
+
+module_init(usb_keyspan_init);
+module_exit(usb_keyspan_exit);
+
+MODULE_DEVICE_TABLE(usb, keyspan_table);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
diff --git a/drivers/input/misc/map_to_7segment.h b/drivers/input/misc/map_to_7segment.h
new file mode 100644
index 00000000000..a424094d9fe
--- /dev/null
+++ b/drivers/input/misc/map_to_7segment.h
@@ -0,0 +1,189 @@
+/*
+ * drivers/usb/input/map_to_7segment.h
+ *
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef MAP_TO_7SEGMENT_H
+#define MAP_TO_7SEGMENT_H
+
+/* This file provides translation primitives and tables for the conversion
+ * of (ASCII) characters to a 7-segments notation.
+ *
+ * The 7 segment's wikipedia notation below is used as standard.
+ * See: http://en.wikipedia.org/wiki/Seven_segment_display
+ *
+ * Notation: +-a-+
+ * f b
+ * +-g-+
+ * e c
+ * +-d-+
+ *
+ * Usage:
+ *
+ * Register a map variable, and fill it with a character set:
+ * static SEG7_DEFAULT_MAP(map_seg7);
+ *
+ *
+ * Then use for conversion:
+ * seg7 = map_to_seg7(&map_seg7, some_char);
+ * ...
+ *
+ * In device drivers it is recommended, if required, to make the char map
+ * accessible via the sysfs interface using the following scheme:
+ *
+ * static ssize_t show_map(struct device *dev, char *buf) {
+ * memcpy(buf, &map_seg7, sizeof(map_seg7));
+ * return sizeof(map_seg7);
+ * }
+ * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
+ * if(cnt != sizeof(map_seg7))
+ * return -EINVAL;
+ * memcpy(&map_seg7, buf, cnt);
+ * return cnt;
+ * }
+ * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
+ *
+ * History:
+ * 2005-05-31 RFC linux-kernel@vger.kernel.org
+ */
+#include <linux/errno.h>
+
+
+#define BIT_SEG7_A 0
+#define BIT_SEG7_B 1
+#define BIT_SEG7_C 2
+#define BIT_SEG7_D 3
+#define BIT_SEG7_E 4
+#define BIT_SEG7_F 5
+#define BIT_SEG7_G 6
+#define BIT_SEG7_RESERVED 7
+
+struct seg7_conversion_map {
+ unsigned char table[128];
+};
+
+static inline int map_to_seg7(struct seg7_conversion_map *map, int c)
+{
+ return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
+}
+
+#define SEG7_CONVERSION_MAP(_name, _map) \
+ struct seg7_conversion_map _name = { .table = { _map } }
+
+/*
+ * It is recommended to use a facility that allows user space to redefine
+ * custom character sets for LCD devices. Please use a sysfs interface
+ * as described above.
+ */
+#define MAP_TO_SEG7_SYSFS_FILE "map_seg7"
+
+/*******************************************************************************
+ * ASCII conversion table
+ ******************************************************************************/
+
+#define _SEG7(l,a,b,c,d,e,f,g) \
+ ( a<<BIT_SEG7_A | b<<BIT_SEG7_B | c<<BIT_SEG7_C | d<<BIT_SEG7_D | \
+ e<<BIT_SEG7_E | f<<BIT_SEG7_F | g<<BIT_SEG7_G )
+
+#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+
+#define _MAP_33_47_ASCII_SEG7_SYMBOL \
+ _SEG7('!',0,0,0,0,1,1,0), _SEG7('"',0,1,0,0,0,1,0), _SEG7('#',0,1,1,0,1,1,0),\
+ _SEG7('$',1,0,1,1,0,1,1), _SEG7('%',0,0,1,0,0,1,0), _SEG7('&',1,0,1,1,1,1,1),\
+ _SEG7('\'',0,0,0,0,0,1,0),_SEG7('(',1,0,0,1,1,1,0), _SEG7(')',1,1,1,1,0,0,0),\
+ _SEG7('*',0,1,1,0,1,1,1), _SEG7('+',0,1,1,0,0,0,1), _SEG7(',',0,0,0,0,1,0,0),\
+ _SEG7('-',0,0,0,0,0,0,1), _SEG7('.',0,0,0,0,1,0,0), _SEG7('/',0,1,0,0,1,0,1),
+
+#define _MAP_48_57_ASCII_SEG7_NUMERIC \
+ _SEG7('0',1,1,1,1,1,1,0), _SEG7('1',0,1,1,0,0,0,0), _SEG7('2',1,1,0,1,1,0,1),\
+ _SEG7('3',1,1,1,1,0,0,1), _SEG7('4',0,1,1,0,0,1,1), _SEG7('5',1,0,1,1,0,1,1),\
+ _SEG7('6',1,0,1,1,1,1,1), _SEG7('7',1,1,1,0,0,0,0), _SEG7('8',1,1,1,1,1,1,1),\
+ _SEG7('9',1,1,1,1,0,1,1),
+
+#define _MAP_58_64_ASCII_SEG7_SYMBOL \
+ _SEG7(':',0,0,0,1,0,0,1), _SEG7(';',0,0,0,1,0,0,1), _SEG7('<',1,0,0,0,0,1,1),\
+ _SEG7('=',0,0,0,1,0,0,1), _SEG7('>',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\
+ _SEG7('@',1,1,0,1,1,1,1),
+
+#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \
+ _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\
+ _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
+ _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\
+ _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
+ _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\
+ _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\
+ _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\
+ _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
+ _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
+
+#define _MAP_91_96_ASCII_SEG7_SYMBOL \
+ _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\
+ _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0),
+
+#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
+ _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\
+ _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
+ _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\
+ _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
+ _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\
+ _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\
+ _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\
+ _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
+ _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
+
+#define _MAP_123_126_ASCII_SEG7_SYMBOL \
+ _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\
+ _SEG7('~',1,0,0,0,0,0,0),
+
+/* Maps */
+
+/* This set tries to map as close as possible to the visible characteristics
+ * of the ASCII symbol, lowercase and uppercase letters may differ in
+ * presentation on the display.
+ */
+#define MAP_ASCII7SEG_ALPHANUM \
+ _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
+ _MAP_33_47_ASCII_SEG7_SYMBOL \
+ _MAP_48_57_ASCII_SEG7_NUMERIC \
+ _MAP_58_64_ASCII_SEG7_SYMBOL \
+ _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \
+ _MAP_91_96_ASCII_SEG7_SYMBOL \
+ _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
+ _MAP_123_126_ASCII_SEG7_SYMBOL
+
+/* This set tries to map as close as possible to the symbolic characteristics
+ * of the ASCII character for maximum discrimination.
+ * For now this means all alpha chars are in lower case representations.
+ * (This for example facilitates the use of hex numbers with uppercase input.)
+ */
+#define MAP_ASCII7SEG_ALPHANUM_LC \
+ _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
+ _MAP_33_47_ASCII_SEG7_SYMBOL \
+ _MAP_48_57_ASCII_SEG7_NUMERIC \
+ _MAP_58_64_ASCII_SEG7_SYMBOL \
+ _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
+ _MAP_91_96_ASCII_SEG7_SYMBOL \
+ _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
+ _MAP_123_126_ASCII_SEG7_SYMBOL
+
+#define SEG7_DEFAULT_MAP(_name) \
+ SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM)
+
+#endif /* MAP_TO_7SEGMENT_H */
+
diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
new file mode 100644
index 00000000000..448a470d28f
--- /dev/null
+++ b/drivers/input/misc/powermate.c
@@ -0,0 +1,463 @@
+/*
+ * A driver for the Griffin Technology, Inc. "PowerMate" USB controller dial.
+ *
+ * v1.1, (c)2002 William R Sowerbutts <will@sowerbutts.com>
+ *
+ * This device is a anodised aluminium knob which connects over USB. It can measure
+ * clockwise and anticlockwise rotation. The dial also acts as a pushbutton with
+ * a spring for automatic release. The base contains a pair of LEDs which illuminate
+ * the translucent base. It rotates without limit and reports its relative rotation
+ * back to the host when polled by the USB controller.
+ *
+ * Testing with the knob I have has shown that it measures approximately 94 "clicks"
+ * for one full rotation. Testing with my High Speed Rotation Actuator (ok, it was
+ * a variable speed cordless electric drill) has shown that the device can measure
+ * speeds of up to 7 clicks either clockwise or anticlockwise between pollings from
+ * the host. If it counts more than 7 clicks before it is polled, it will wrap back
+ * to zero and start counting again. This was at quite high speed, however, almost
+ * certainly faster than the human hand could turn it. Griffin say that it loses a
+ * pulse or two on a direction change; the granularity is so fine that I never
+ * noticed this in practice.
+ *
+ * The device's microcontroller can be programmed to set the LED to either a constant
+ * intensity, or to a rhythmic pulsing. Several patterns and speeds are available.
+ *
+ * Griffin were very happy to provide documentation and free hardware for development.
+ *
+ * Some userspace tools are available on the web: http://sowerbutts.com/powermate/
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/usb/input.h>
+
+#define POWERMATE_VENDOR 0x077d /* Griffin Technology, Inc. */
+#define POWERMATE_PRODUCT_NEW 0x0410 /* Griffin PowerMate */
+#define POWERMATE_PRODUCT_OLD 0x04AA /* Griffin soundKnob */
+
+#define CONTOUR_VENDOR 0x05f3 /* Contour Design, Inc. */
+#define CONTOUR_JOG 0x0240 /* Jog and Shuttle */
+
+/* these are the command codes we send to the device */
+#define SET_STATIC_BRIGHTNESS 0x01
+#define SET_PULSE_ASLEEP 0x02
+#define SET_PULSE_AWAKE 0x03
+#define SET_PULSE_MODE 0x04
+
+/* these refer to bits in the powermate_device's requires_update field. */
+#define UPDATE_STATIC_BRIGHTNESS (1<<0)
+#define UPDATE_PULSE_ASLEEP (1<<1)
+#define UPDATE_PULSE_AWAKE (1<<2)
+#define UPDATE_PULSE_MODE (1<<3)
+
+/* at least two versions of the hardware exist, with differing payload
+ sizes. the first three bytes always contain the "interesting" data in
+ the relevant format. */
+#define POWERMATE_PAYLOAD_SIZE_MAX 6
+#define POWERMATE_PAYLOAD_SIZE_MIN 3
+struct powermate_device {
+ signed char *data;
+ dma_addr_t data_dma;
+ struct urb *irq, *config;
+ struct usb_ctrlrequest *configcr;
+ dma_addr_t configcr_dma;
+ struct usb_device *udev;
+ struct input_dev *input;
+ spinlock_t lock;
+ int static_brightness;
+ int pulse_speed;
+ int pulse_table;
+ int pulse_asleep;
+ int pulse_awake;
+ int requires_update; // physical settings which are out of sync
+ char phys[64];
+};
+
+static char pm_name_powermate[] = "Griffin PowerMate";
+static char pm_name_soundknob[] = "Griffin SoundKnob";
+
+static void powermate_config_complete(struct urb *urb);
+
+/* Callback for data arriving from the PowerMate over the USB interrupt pipe */
+static void powermate_irq(struct urb *urb)
+{
+ struct powermate_device *pm = urb->context;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+ goto exit;
+ }
+
+ /* handle updates to device state */
+ input_report_key(pm->input, BTN_0, pm->data[0] & 0x01);
+ input_report_rel(pm->input, REL_DIAL, pm->data[1]);
+ input_sync(pm->input);
+
+exit:
+ retval = usb_submit_urb (urb, GFP_ATOMIC);
+ if (retval)
+ err ("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, retval);
+}
+
+/* Decide if we need to issue a control message and do so. Must be called with pm->lock taken */
+static void powermate_sync_state(struct powermate_device *pm)
+{
+ if (pm->requires_update == 0)
+ return; /* no updates are required */
+ if (pm->config->status == -EINPROGRESS)
+ return; /* an update is already in progress; it'll issue this update when it completes */
+
+ if (pm->requires_update & UPDATE_PULSE_ASLEEP){
+ pm->configcr->wValue = cpu_to_le16( SET_PULSE_ASLEEP );
+ pm->configcr->wIndex = cpu_to_le16( pm->pulse_asleep ? 1 : 0 );
+ pm->requires_update &= ~UPDATE_PULSE_ASLEEP;
+ }else if (pm->requires_update & UPDATE_PULSE_AWAKE){
+ pm->configcr->wValue = cpu_to_le16( SET_PULSE_AWAKE );
+ pm->configcr->wIndex = cpu_to_le16( pm->pulse_awake ? 1 : 0 );
+ pm->requires_update &= ~UPDATE_PULSE_AWAKE;
+ }else if (pm->requires_update & UPDATE_PULSE_MODE){
+ int op, arg;
+ /* the powermate takes an operation and an argument for its pulse algorithm.
+ the operation can be:
+ 0: divide the speed
+ 1: pulse at normal speed
+ 2: multiply the speed
+ the argument only has an effect for operations 0 and 2, and ranges between
+ 1 (least effect) to 255 (maximum effect).
+
+ thus, several states are equivalent and are coalesced into one state.
+
+ we map this onto a range from 0 to 510, with:
+ 0 -- 254 -- use divide (0 = slowest)
+ 255 -- use normal speed
+ 256 -- 510 -- use multiple (510 = fastest).
+
+ Only values of 'arg' quite close to 255 are particularly useful/spectacular.
+ */
+ if (pm->pulse_speed < 255) {
+ op = 0; // divide
+ arg = 255 - pm->pulse_speed;
+ } else if (pm->pulse_speed > 255) {
+ op = 2; // multiply
+ arg = pm->pulse_speed - 255;
+ } else {
+ op = 1; // normal speed
+ arg = 0; // can be any value
+ }
+ pm->configcr->wValue = cpu_to_le16( (pm->pulse_table << 8) | SET_PULSE_MODE );
+ pm->configcr->wIndex = cpu_to_le16( (arg << 8) | op );
+ pm->requires_update &= ~UPDATE_PULSE_MODE;
+ } else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS) {
+ pm->configcr->wValue = cpu_to_le16( SET_STATIC_BRIGHTNESS );
+ pm->configcr->wIndex = cpu_to_le16( pm->static_brightness );
+ pm->requires_update &= ~UPDATE_STATIC_BRIGHTNESS;
+ } else {
+ printk(KERN_ERR "powermate: unknown update required");
+ pm->requires_update = 0; /* fudge the bug */
+ return;
+ }
+
+/* printk("powermate: %04x %04x\n", pm->configcr->wValue, pm->configcr->wIndex); */
+
+ pm->configcr->bRequestType = 0x41; /* vendor request */
+ pm->configcr->bRequest = 0x01;
+ pm->configcr->wLength = 0;
+
+ usb_fill_control_urb(pm->config, pm->udev, usb_sndctrlpipe(pm->udev, 0),
+ (void *) pm->configcr, NULL, 0,
+ powermate_config_complete, pm);
+ pm->config->setup_dma = pm->configcr_dma;
+ pm->config->transfer_flags |= URB_NO_SETUP_DMA_MAP;
+
+ if (usb_submit_urb(pm->config, GFP_ATOMIC))
+ printk(KERN_ERR "powermate: usb_submit_urb(config) failed");
+}
+
+/* Called when our asynchronous control message completes. We may need to issue another immediately */
+static void powermate_config_complete(struct urb *urb)
+{
+ struct powermate_device *pm = urb->context;
+ unsigned long flags;
+
+ if (urb->status)
+ printk(KERN_ERR "powermate: config urb returned %d\n", urb->status);
+
+ spin_lock_irqsave(&pm->lock, flags);
+ powermate_sync_state(pm);
+ spin_unlock_irqrestore(&pm->lock, flags);
+}
+
+/* Set the LED up as described and begin the sync with the hardware if required */
+static void powermate_pulse_led(struct powermate_device *pm, int static_brightness, int pulse_speed,
+ int pulse_table, int pulse_asleep, int pulse_awake)
+{
+ unsigned long flags;
+
+ if (pulse_speed < 0)
+ pulse_speed = 0;
+ if (pulse_table < 0)
+ pulse_table = 0;
+ if (pulse_speed > 510)
+ pulse_speed = 510;
+ if (pulse_table > 2)
+ pulse_table = 2;
+
+ pulse_asleep = !!pulse_asleep;
+ pulse_awake = !!pulse_awake;
+
+
+ spin_lock_irqsave(&pm->lock, flags);
+
+ /* mark state updates which are required */
+ if (static_brightness != pm->static_brightness) {
+ pm->static_brightness = static_brightness;
+ pm->requires_update |= UPDATE_STATIC_BRIGHTNESS;
+ }
+ if (pulse_asleep != pm->pulse_asleep) {
+ pm->pulse_asleep = pulse_asleep;
+ pm->requires_update |= (UPDATE_PULSE_ASLEEP | UPDATE_STATIC_BRIGHTNESS);
+ }
+ if (pulse_awake != pm->pulse_awake) {
+ pm->pulse_awake = pulse_awake;
+ pm->requires_update |= (UPDATE_PULSE_AWAKE | UPDATE_STATIC_BRIGHTNESS);
+ }
+ if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table) {
+ pm->pulse_speed = pulse_speed;
+ pm->pulse_table = pulse_table;
+ pm->requires_update |= UPDATE_PULSE_MODE;
+ }
+
+ powermate_sync_state(pm);
+
+ spin_unlock_irqrestore(&pm->lock, flags);
+}
+
+/* Callback from the Input layer when an event arrives from userspace to configure the LED */
+static int powermate_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int _value)
+{
+ unsigned int command = (unsigned int)_value;
+ struct powermate_device *pm = input_get_drvdata(dev);
+
+ if (type == EV_MSC && code == MSC_PULSELED){
+ /*
+ bits 0- 7: 8 bits: LED brightness
+ bits 8-16: 9 bits: pulsing speed modifier (0 ... 510); 0-254 = slower, 255 = standard, 256-510 = faster.
+ bits 17-18: 2 bits: pulse table (0, 1, 2 valid)
+ bit 19: 1 bit : pulse whilst asleep?
+ bit 20: 1 bit : pulse constantly?
+ */
+ int static_brightness = command & 0xFF; // bits 0-7
+ int pulse_speed = (command >> 8) & 0x1FF; // bits 8-16
+ int pulse_table = (command >> 17) & 0x3; // bits 17-18
+ int pulse_asleep = (command >> 19) & 0x1; // bit 19
+ int pulse_awake = (command >> 20) & 0x1; // bit 20
+
+ powermate_pulse_led(pm, static_brightness, pulse_speed, pulse_table, pulse_asleep, pulse_awake);
+ }
+
+ return 0;
+}
+
+static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_device *pm)
+{
+ pm->data = usb_buffer_alloc(udev, POWERMATE_PAYLOAD_SIZE_MAX,
+ GFP_ATOMIC, &pm->data_dma);
+ if (!pm->data)
+ return -1;
+
+ pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)),
+ GFP_ATOMIC, &pm->configcr_dma);
+ if (!pm->configcr)
+ return -1;
+
+ return 0;
+}
+
+static void powermate_free_buffers(struct usb_device *udev, struct powermate_device *pm)
+{
+ usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX,
+ pm->data, pm->data_dma);
+ usb_buffer_free(udev, sizeof(*(pm->configcr)),
+ pm->configcr, pm->configcr_dma);
+}
+
+/* Called whenever a USB device matching one in our supported devices table is connected */
+static int powermate_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev (intf);
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct powermate_device *pm;
+ struct input_dev *input_dev;
+ int pipe, maxp;
+ int error = -ENOMEM;
+
+ interface = intf->cur_altsetting;
+ endpoint = &interface->endpoint[0].desc;
+ if (!usb_endpoint_is_int_in(endpoint))
+ return -EIO;
+
+ usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ 0x0a, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, interface->desc.bInterfaceNumber, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+
+ pm = kzalloc(sizeof(struct powermate_device), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!pm || !input_dev)
+ goto fail1;
+
+ if (powermate_alloc_buffers(udev, pm))
+ goto fail2;
+
+ pm->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!pm->irq)
+ goto fail2;
+
+ pm->config = usb_alloc_urb(0, GFP_KERNEL);
+ if (!pm->config)
+ goto fail3;
+
+ pm->udev = udev;
+ pm->input = input_dev;
+
+ usb_make_path(udev, pm->phys, sizeof(pm->phys));
+ strlcpy(pm->phys, "/input0", sizeof(pm->phys));
+
+ spin_lock_init(&pm->lock);
+
+ switch (le16_to_cpu(udev->descriptor.idProduct)) {
+ case POWERMATE_PRODUCT_NEW:
+ input_dev->name = pm_name_powermate;
+ break;
+ case POWERMATE_PRODUCT_OLD:
+ input_dev->name = pm_name_soundknob;
+ break;
+ default:
+ input_dev->name = pm_name_soundknob;
+ printk(KERN_WARNING "powermate: unknown product id %04x\n",
+ le16_to_cpu(udev->descriptor.idProduct));
+ }
+
+ input_dev->phys = pm->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, pm);
+
+ input_dev->event = powermate_input_event;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC);
+ input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0);
+ input_dev->relbit[LONG(REL_DIAL)] = BIT(REL_DIAL);
+ input_dev->mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED);
+
+ /* get a handle to the interrupt data pipe */
+ pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+
+ if (maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX) {
+ printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n",
+ POWERMATE_PAYLOAD_SIZE_MIN, POWERMATE_PAYLOAD_SIZE_MAX, maxp);
+ maxp = POWERMATE_PAYLOAD_SIZE_MAX;
+ }
+
+ usb_fill_int_urb(pm->irq, udev, pipe, pm->data,
+ maxp, powermate_irq,
+ pm, endpoint->bInterval);
+ pm->irq->transfer_dma = pm->data_dma;
+ pm->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* register our interrupt URB with the USB system */
+ if (usb_submit_urb(pm->irq, GFP_KERNEL)) {
+ error = -EIO;
+ goto fail4;
+ }
+
+ error = input_register_device(pm->input);
+ if (error)
+ goto fail5;
+
+
+ /* force an update of everything */
+ pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS;
+ powermate_pulse_led(pm, 0x80, 255, 0, 1, 0); // set default pulse parameters
+
+ usb_set_intfdata(intf, pm);
+ return 0;
+
+ fail5: usb_kill_urb(pm->irq);
+ fail4: usb_free_urb(pm->config);
+ fail3: usb_free_urb(pm->irq);
+ fail2: powermate_free_buffers(udev, pm);
+ fail1: input_free_device(input_dev);
+ kfree(pm);
+ return error;
+}
+
+/* Called when a USB device we've accepted ownership of is removed */
+static void powermate_disconnect(struct usb_interface *intf)
+{
+ struct powermate_device *pm = usb_get_intfdata (intf);
+
+ usb_set_intfdata(intf, NULL);
+ if (pm) {
+ pm->requires_update = 0;
+ usb_kill_urb(pm->irq);
+ input_unregister_device(pm->input);
+ usb_free_urb(pm->irq);
+ usb_free_urb(pm->config);
+ powermate_free_buffers(interface_to_usbdev(intf), pm);
+
+ kfree(pm);
+ }
+}
+
+static struct usb_device_id powermate_devices [] = {
+ { USB_DEVICE(POWERMATE_VENDOR, POWERMATE_PRODUCT_NEW) },
+ { USB_DEVICE(POWERMATE_VENDOR, POWERMATE_PRODUCT_OLD) },
+ { USB_DEVICE(CONTOUR_VENDOR, CONTOUR_JOG) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, powermate_devices);
+
+static struct usb_driver powermate_driver = {
+ .name = "powermate",
+ .probe = powermate_probe,
+ .disconnect = powermate_disconnect,
+ .id_table = powermate_devices,
+};
+
+static int __init powermate_init(void)
+{
+ return usb_register(&powermate_driver);
+}
+
+static void __exit powermate_cleanup(void)
+{
+ usb_deregister(&powermate_driver);
+}
+
+module_init(powermate_init);
+module_exit(powermate_cleanup);
+
+MODULE_AUTHOR( "William R Sowerbutts" );
+MODULE_DESCRIPTION( "Griffin Technology, Inc PowerMate driver" );
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
new file mode 100644
index 00000000000..ab15880fd56
--- /dev/null
+++ b/drivers/input/misc/yealink.c
@@ -0,0 +1,1004 @@
+/*
+ * drivers/usb/input/yealink.c
+ *
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/*
+ * Description:
+ * Driver for the USB-P1K voip usb phone.
+ * This device is produced by Yealink Network Technology Co Ltd
+ * but may be branded under several names:
+ * - Yealink usb-p1k
+ * - Tiptel 115
+ * - ...
+ *
+ * This driver is based on:
+ * - the usbb2k-api http://savannah.nongnu.org/projects/usbb2k-api/
+ * - information from http://memeteau.free.fr/usbb2k
+ * - the xpad-driver drivers/input/joystick/xpad.c
+ *
+ * Thanks to:
+ * - Olivier Vandorpe, for providing the usbb2k-api.
+ * - Martin Diehl, for spotting my memory allocation bug.
+ *
+ * History:
+ * 20050527 henk First version, functional keyboard. Keyboard events
+ * will pop-up on the ../input/eventX bus.
+ * 20050531 henk Added led, LCD, dialtone and sysfs interface.
+ * 20050610 henk Cleanups, make it ready for public consumption.
+ * 20050630 henk Cleanups, fixes in response to comments.
+ * 20050701 henk sysfs write serialisation, fix potential unload races
+ * 20050801 henk Added ringtone, restructure USB
+ * 20050816 henk Merge 2.6.13-rc6
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/rwsem.h>
+#include <linux/usb/input.h>
+
+#include "map_to_7segment.h"
+#include "yealink.h"
+
+#define DRIVER_VERSION "yld-20051230"
+#define DRIVER_AUTHOR "Henk Vergonet"
+#define DRIVER_DESC "Yealink phone driver"
+
+#define YEALINK_POLLING_FREQUENCY 10 /* in [Hz] */
+
+struct yld_status {
+ u8 lcd[24];
+ u8 led;
+ u8 dialtone;
+ u8 ringtone;
+ u8 keynum;
+} __attribute__ ((packed));
+
+/*
+ * Register the LCD segment and icon map
+ */
+#define _LOC(k,l) { .a = (k), .m = (l) }
+#define _SEG(t, a, am, b, bm, c, cm, d, dm, e, em, f, fm, g, gm) \
+ { .type = (t), \
+ .u = { .s = { _LOC(a, am), _LOC(b, bm), _LOC(c, cm), \
+ _LOC(d, dm), _LOC(e, em), _LOC(g, gm), \
+ _LOC(f, fm) } } }
+#define _PIC(t, h, hm, n) \
+ { .type = (t), \
+ .u = { .p = { .name = (n), .a = (h), .m = (hm) } } }
+
+static const struct lcd_segment_map {
+ char type;
+ union {
+ struct pictogram_map {
+ u8 a,m;
+ char name[10];
+ } p;
+ struct segment_map {
+ u8 a,m;
+ } s[7];
+ } u;
+} lcdMap[] = {
+#include "yealink.h"
+};
+
+struct yealink_dev {
+ struct input_dev *idev; /* input device */
+ struct usb_device *udev; /* usb device */
+
+ /* irq input channel */
+ struct yld_ctl_packet *irq_data;
+ dma_addr_t irq_dma;
+ struct urb *urb_irq;
+
+ /* control output channel */
+ struct yld_ctl_packet *ctl_data;
+ dma_addr_t ctl_dma;
+ struct usb_ctrlrequest *ctl_req;
+ dma_addr_t ctl_req_dma;
+ struct urb *urb_ctl;
+
+ char phys[64]; /* physical device path */
+
+ u8 lcdMap[ARRAY_SIZE(lcdMap)]; /* state of LCD, LED ... */
+ int key_code; /* last reported key */
+
+ int stat_ix;
+ union {
+ struct yld_status s;
+ u8 b[sizeof(struct yld_status)];
+ } master, copy;
+};
+
+
+/*******************************************************************************
+ * Yealink lcd interface
+ ******************************************************************************/
+
+/*
+ * Register a default 7 segment character set
+ */
+static SEG7_DEFAULT_MAP(map_seg7);
+
+ /* Display a char,
+ * char '\9' and '\n' are placeholders and do not overwrite the original text.
+ * A space will always hide an icon.
+ */
+static int setChar(struct yealink_dev *yld, int el, int chr)
+{
+ int i, a, m, val;
+
+ if (el >= ARRAY_SIZE(lcdMap))
+ return -EINVAL;
+
+ if (chr == '\t' || chr == '\n')
+ return 0;
+
+ yld->lcdMap[el] = chr;
+
+ if (lcdMap[el].type == '.') {
+ a = lcdMap[el].u.p.a;
+ m = lcdMap[el].u.p.m;
+ if (chr != ' ')
+ yld->master.b[a] |= m;
+ else
+ yld->master.b[a] &= ~m;
+ return 0;
+ }
+
+ val = map_to_seg7(&map_seg7, chr);
+ for (i = 0; i < ARRAY_SIZE(lcdMap[0].u.s); i++) {
+ m = lcdMap[el].u.s[i].m;
+
+ if (m == 0)
+ continue;
+
+ a = lcdMap[el].u.s[i].a;
+ if (val & 1)
+ yld->master.b[a] |= m;
+ else
+ yld->master.b[a] &= ~m;
+ val = val >> 1;
+ }
+ return 0;
+};
+
+/*******************************************************************************
+ * Yealink key interface
+ ******************************************************************************/
+
+/* Map device buttons to internal key events.
+ *
+ * USB-P1K button layout:
+ *
+ * up
+ * IN OUT
+ * down
+ *
+ * pickup C hangup
+ * 1 2 3
+ * 4 5 6
+ * 7 8 9
+ * * 0 #
+ *
+ * The "up" and "down" keys, are symbolised by arrows on the button.
+ * The "pickup" and "hangup" keys are symbolised by a green and red phone
+ * on the button.
+ */
+static int map_p1k_to_key(int scancode)
+{
+ switch(scancode) { /* phone key: */
+ case 0x23: return KEY_LEFT; /* IN */
+ case 0x33: return KEY_UP; /* up */
+ case 0x04: return KEY_RIGHT; /* OUT */
+ case 0x24: return KEY_DOWN; /* down */
+ case 0x03: return KEY_ENTER; /* pickup */
+ case 0x14: return KEY_BACKSPACE; /* C */
+ case 0x13: return KEY_ESC; /* hangup */
+ case 0x00: return KEY_1; /* 1 */
+ case 0x01: return KEY_2; /* 2 */
+ case 0x02: return KEY_3; /* 3 */
+ case 0x10: return KEY_4; /* 4 */
+ case 0x11: return KEY_5; /* 5 */
+ case 0x12: return KEY_6; /* 6 */
+ case 0x20: return KEY_7; /* 7 */
+ case 0x21: return KEY_8; /* 8 */
+ case 0x22: return KEY_9; /* 9 */
+ case 0x30: return KEY_KPASTERISK; /* * */
+ case 0x31: return KEY_0; /* 0 */
+ case 0x32: return KEY_LEFTSHIFT |
+ KEY_3 << 8; /* # */
+ }
+ return -EINVAL;
+}
+
+/* Completes a request by converting the data into events for the
+ * input subsystem.
+ *
+ * The key parameter can be cascaded: key2 << 8 | key1
+ */
+static void report_key(struct yealink_dev *yld, int key)
+{
+ struct input_dev *idev = yld->idev;
+
+ if (yld->key_code >= 0) {
+ /* old key up */
+ input_report_key(idev, yld->key_code & 0xff, 0);
+ if (yld->key_code >> 8)
+ input_report_key(idev, yld->key_code >> 8, 0);
+ }
+
+ yld->key_code = key;
+ if (key >= 0) {
+ /* new valid key */
+ input_report_key(idev, key & 0xff, 1);
+ if (key >> 8)
+ input_report_key(idev, key >> 8, 1);
+ }
+ input_sync(idev);
+}
+
+/*******************************************************************************
+ * Yealink usb communication interface
+ ******************************************************************************/
+
+static int yealink_cmd(struct yealink_dev *yld, struct yld_ctl_packet *p)
+{
+ u8 *buf = (u8 *)p;
+ int i;
+ u8 sum = 0;
+
+ for(i=0; i<USB_PKT_LEN-1; i++)
+ sum -= buf[i];
+ p->sum = sum;
+ return usb_control_msg(yld->udev,
+ usb_sndctrlpipe(yld->udev, 0),
+ USB_REQ_SET_CONFIGURATION,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ 0x200, 3,
+ p, sizeof(*p),
+ USB_CTRL_SET_TIMEOUT);
+}
+
+static u8 default_ringtone[] = {
+ 0xEF, /* volume [0-255] */
+ 0xFB, 0x1E, 0x00, 0x0C, /* 1250 [hz], 12/100 [s] */
+ 0xFC, 0x18, 0x00, 0x0C, /* 1000 [hz], 12/100 [s] */
+ 0xFB, 0x1E, 0x00, 0x0C,
+ 0xFC, 0x18, 0x00, 0x0C,
+ 0xFB, 0x1E, 0x00, 0x0C,
+ 0xFC, 0x18, 0x00, 0x0C,
+ 0xFB, 0x1E, 0x00, 0x0C,
+ 0xFC, 0x18, 0x00, 0x0C,
+ 0xFF, 0xFF, 0x01, 0x90, /* silent, 400/100 [s] */
+ 0x00, 0x00 /* end of sequence */
+};
+
+static int yealink_set_ringtone(struct yealink_dev *yld, u8 *buf, size_t size)
+{
+ struct yld_ctl_packet *p = yld->ctl_data;
+ int ix, len;
+
+ if (size <= 0)
+ return -EINVAL;
+
+ /* Set the ringtone volume */
+ memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
+ yld->ctl_data->cmd = CMD_RING_VOLUME;
+ yld->ctl_data->size = 1;
+ yld->ctl_data->data[0] = buf[0];
+ yealink_cmd(yld, p);
+
+ buf++;
+ size--;
+
+ p->cmd = CMD_RING_NOTE;
+ ix = 0;
+ while (size != ix) {
+ len = size - ix;
+ if (len > sizeof(p->data))
+ len = sizeof(p->data);
+ p->size = len;
+ p->offset = cpu_to_be16(ix);
+ memcpy(p->data, &buf[ix], len);
+ yealink_cmd(yld, p);
+ ix += len;
+ }
+ return 0;
+}
+
+/* keep stat_master & stat_copy in sync.
+ */
+static int yealink_do_idle_tasks(struct yealink_dev *yld)
+{
+ u8 val;
+ int i, ix, len;
+
+ ix = yld->stat_ix;
+
+ memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
+ yld->ctl_data->cmd = CMD_KEYPRESS;
+ yld->ctl_data->size = 1;
+ yld->ctl_data->sum = 0xff - CMD_KEYPRESS;
+
+ /* If state update pointer wraps do a KEYPRESS first. */
+ if (ix >= sizeof(yld->master)) {
+ yld->stat_ix = 0;
+ return 0;
+ }
+
+ /* find update candidates: copy != master */
+ do {
+ val = yld->master.b[ix];
+ if (val != yld->copy.b[ix])
+ goto send_update;
+ } while (++ix < sizeof(yld->master));
+
+ /* nothing todo, wait a bit and poll for a KEYPRESS */
+ yld->stat_ix = 0;
+ /* TODO how can we wait abit. ??
+ * msleep_interruptible(1000 / YEALINK_POLLING_FREQUENCY);
+ */
+ return 0;
+
+send_update:
+
+ /* Setup an appropriate update request */
+ yld->copy.b[ix] = val;
+ yld->ctl_data->data[0] = val;
+
+ switch(ix) {
+ case offsetof(struct yld_status, led):
+ yld->ctl_data->cmd = CMD_LED;
+ yld->ctl_data->sum = -1 - CMD_LED - val;
+ break;
+ case offsetof(struct yld_status, dialtone):
+ yld->ctl_data->cmd = CMD_DIALTONE;
+ yld->ctl_data->sum = -1 - CMD_DIALTONE - val;
+ break;
+ case offsetof(struct yld_status, ringtone):
+ yld->ctl_data->cmd = CMD_RINGTONE;
+ yld->ctl_data->sum = -1 - CMD_RINGTONE - val;
+ break;
+ case offsetof(struct yld_status, keynum):
+ val--;
+ val &= 0x1f;
+ yld->ctl_data->cmd = CMD_SCANCODE;
+ yld->ctl_data->offset = cpu_to_be16(val);
+ yld->ctl_data->data[0] = 0;
+ yld->ctl_data->sum = -1 - CMD_SCANCODE - val;
+ break;
+ default:
+ len = sizeof(yld->master.s.lcd) - ix;
+ if (len > sizeof(yld->ctl_data->data))
+ len = sizeof(yld->ctl_data->data);
+
+ /* Combine up to <len> consecutive LCD bytes in a singe request
+ */
+ yld->ctl_data->cmd = CMD_LCD;
+ yld->ctl_data->offset = cpu_to_be16(ix);
+ yld->ctl_data->size = len;
+ yld->ctl_data->sum = -CMD_LCD - ix - val - len;
+ for(i=1; i<len; i++) {
+ ix++;
+ val = yld->master.b[ix];
+ yld->copy.b[ix] = val;
+ yld->ctl_data->data[i] = val;
+ yld->ctl_data->sum -= val;
+ }
+ }
+ yld->stat_ix = ix + 1;
+ return 1;
+}
+
+/* Decide on how to handle responses
+ *
+ * The state transition diagram is somethhing like:
+ *
+ * syncState<--+
+ * | |
+ * | idle
+ * \|/ |
+ * init --ok--> waitForKey --ok--> getKey
+ * ^ ^ |
+ * | +-------ok-------+
+ * error,start
+ *
+ */
+static void urb_irq_callback(struct urb *urb)
+{
+ struct yealink_dev *yld = urb->context;
+ int ret;
+
+ if (urb->status)
+ err("%s - urb status %d", __FUNCTION__, urb->status);
+
+ switch (yld->irq_data->cmd) {
+ case CMD_KEYPRESS:
+
+ yld->master.s.keynum = yld->irq_data->data[0];
+ break;
+
+ case CMD_SCANCODE:
+ dbg("get scancode %x", yld->irq_data->data[0]);
+
+ report_key(yld, map_p1k_to_key(yld->irq_data->data[0]));
+ break;
+
+ default:
+ err("unexpected response %x", yld->irq_data->cmd);
+ }
+
+ yealink_do_idle_tasks(yld);
+
+ ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
+ if (ret)
+ err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
+}
+
+static void urb_ctl_callback(struct urb *urb)
+{
+ struct yealink_dev *yld = urb->context;
+ int ret;
+
+ if (urb->status)
+ err("%s - urb status %d", __FUNCTION__, urb->status);
+
+ switch (yld->ctl_data->cmd) {
+ case CMD_KEYPRESS:
+ case CMD_SCANCODE:
+ /* ask for a response */
+ ret = usb_submit_urb(yld->urb_irq, GFP_ATOMIC);
+ break;
+ default:
+ /* send new command */
+ yealink_do_idle_tasks(yld);
+ ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
+ }
+
+ if (ret)
+ err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
+}
+
+/*******************************************************************************
+ * input event interface
+ ******************************************************************************/
+
+/* TODO should we issue a ringtone on a SND_BELL event?
+static int input_ev(struct input_dev *dev, unsigned int type,
+ unsigned int code, int value)
+{
+
+ if (type != EV_SND)
+ return -EINVAL;
+
+ switch (code) {
+ case SND_BELL:
+ case SND_TONE:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+*/
+
+static int input_open(struct input_dev *dev)
+{
+ struct yealink_dev *yld = input_get_drvdata(dev);
+ int i, ret;
+
+ dbg("%s", __FUNCTION__);
+
+ /* force updates to device */
+ for (i = 0; i<sizeof(yld->master); i++)
+ yld->copy.b[i] = ~yld->master.b[i];
+ yld->key_code = -1; /* no keys pressed */
+
+ yealink_set_ringtone(yld, default_ringtone, sizeof(default_ringtone));
+
+ /* issue INIT */
+ memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
+ yld->ctl_data->cmd = CMD_INIT;
+ yld->ctl_data->size = 10;
+ yld->ctl_data->sum = 0x100-CMD_INIT-10;
+ if ((ret = usb_submit_urb(yld->urb_ctl, GFP_KERNEL)) != 0) {
+ dbg("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, ret);
+ return ret;
+ }
+ return 0;
+}
+
+static void input_close(struct input_dev *dev)
+{
+ struct yealink_dev *yld = input_get_drvdata(dev);
+
+ usb_kill_urb(yld->urb_ctl);
+ usb_kill_urb(yld->urb_irq);
+}
+
+/*******************************************************************************
+ * sysfs interface
+ ******************************************************************************/
+
+static DECLARE_RWSEM(sysfs_rwsema);
+
+/* Interface to the 7-segments translation table aka. char set.
+ */
+static ssize_t show_map(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ memcpy(buf, &map_seg7, sizeof(map_seg7));
+ return sizeof(map_seg7);
+}
+
+static ssize_t store_map(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t cnt)
+{
+ if (cnt != sizeof(map_seg7))
+ return -EINVAL;
+ memcpy(&map_seg7, buf, sizeof(map_seg7));
+ return sizeof(map_seg7);
+}
+
+/* Interface to the LCD.
+ */
+
+/* Reading /sys/../lineX will return the format string with its settings:
+ *
+ * Example:
+ * cat ./line3
+ * 888888888888
+ * Linux Rocks!
+ */
+static ssize_t show_line(struct device *dev, char *buf, int a, int b)
+{
+ struct yealink_dev *yld;
+ int i;
+
+ down_read(&sysfs_rwsema);
+ yld = dev_get_drvdata(dev);
+ if (yld == NULL) {
+ up_read(&sysfs_rwsema);
+ return -ENODEV;
+ }
+
+ for (i = a; i < b; i++)
+ *buf++ = lcdMap[i].type;
+ *buf++ = '\n';
+ for (i = a; i < b; i++)
+ *buf++ = yld->lcdMap[i];
+ *buf++ = '\n';
+ *buf = 0;
+
+ up_read(&sysfs_rwsema);
+ return 3 + ((b - a) << 1);
+}
+
+static ssize_t show_line1(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_line(dev, buf, LCD_LINE1_OFFSET, LCD_LINE2_OFFSET);
+}
+
+static ssize_t show_line2(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_line(dev, buf, LCD_LINE2_OFFSET, LCD_LINE3_OFFSET);
+}
+
+static ssize_t show_line3(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_line(dev, buf, LCD_LINE3_OFFSET, LCD_LINE4_OFFSET);
+}
+
+/* Writing to /sys/../lineX will set the coresponding LCD line.
+ * - Excess characters are ignored.
+ * - If less characters are written than allowed, the remaining digits are
+ * unchanged.
+ * - The '\n' or '\t' char is a placeholder, it does not overwrite the
+ * original content.
+ */
+static ssize_t store_line(struct device *dev, const char *buf, size_t count,
+ int el, size_t len)
+{
+ struct yealink_dev *yld;
+ int i;
+
+ down_write(&sysfs_rwsema);
+ yld = dev_get_drvdata(dev);
+ if (yld == NULL) {
+ up_write(&sysfs_rwsema);
+ return -ENODEV;
+ }
+
+ if (len > count)
+ len = count;
+ for (i = 0; i < len; i++)
+ setChar(yld, el++, buf[i]);
+
+ up_write(&sysfs_rwsema);
+ return count;
+}
+
+static ssize_t store_line1(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return store_line(dev, buf, count, LCD_LINE1_OFFSET, LCD_LINE1_SIZE);
+}
+
+static ssize_t store_line2(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return store_line(dev, buf, count, LCD_LINE2_OFFSET, LCD_LINE2_SIZE);
+}
+
+static ssize_t store_line3(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return store_line(dev, buf, count, LCD_LINE3_OFFSET, LCD_LINE3_SIZE);
+}
+
+/* Interface to visible and audible "icons", these include:
+ * pictures on the LCD, the LED, and the dialtone signal.
+ */
+
+/* Get a list of "switchable elements" with their current state. */
+static ssize_t get_icons(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct yealink_dev *yld;
+ int i, ret = 1;
+
+ down_read(&sysfs_rwsema);
+ yld = dev_get_drvdata(dev);
+ if (yld == NULL) {
+ up_read(&sysfs_rwsema);
+ return -ENODEV;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(lcdMap); i++) {
+ if (lcdMap[i].type != '.')
+ continue;
+ ret += sprintf(&buf[ret], "%s %s\n",
+ yld->lcdMap[i] == ' ' ? " " : "on",
+ lcdMap[i].u.p.name);
+ }
+ up_read(&sysfs_rwsema);
+ return ret;
+}
+
+/* Change the visibility of a particular element. */
+static ssize_t set_icon(struct device *dev, const char *buf, size_t count,
+ int chr)
+{
+ struct yealink_dev *yld;
+ int i;
+
+ down_write(&sysfs_rwsema);
+ yld = dev_get_drvdata(dev);
+ if (yld == NULL) {
+ up_write(&sysfs_rwsema);
+ return -ENODEV;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(lcdMap); i++) {
+ if (lcdMap[i].type != '.')
+ continue;
+ if (strncmp(buf, lcdMap[i].u.p.name, count) == 0) {
+ setChar(yld, i, chr);
+ break;
+ }
+ }
+
+ up_write(&sysfs_rwsema);
+ return count;
+}
+
+static ssize_t show_icon(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return set_icon(dev, buf, count, buf[0]);
+}
+
+static ssize_t hide_icon(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return set_icon(dev, buf, count, ' ');
+}
+
+/* Upload a ringtone to the device.
+ */
+
+/* Stores raw ringtone data in the phone */
+static ssize_t store_ringtone(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct yealink_dev *yld;
+
+ down_write(&sysfs_rwsema);
+ yld = dev_get_drvdata(dev);
+ if (yld == NULL) {
+ up_write(&sysfs_rwsema);
+ return -ENODEV;
+ }
+
+ /* TODO locking with async usb control interface??? */
+ yealink_set_ringtone(yld, (char *)buf, count);
+ up_write(&sysfs_rwsema);
+ return count;
+}
+
+#define _M444 S_IRUGO
+#define _M664 S_IRUGO|S_IWUSR|S_IWGRP
+#define _M220 S_IWUSR|S_IWGRP
+
+static DEVICE_ATTR(map_seg7 , _M664, show_map , store_map );
+static DEVICE_ATTR(line1 , _M664, show_line1 , store_line1 );
+static DEVICE_ATTR(line2 , _M664, show_line2 , store_line2 );
+static DEVICE_ATTR(line3 , _M664, show_line3 , store_line3 );
+static DEVICE_ATTR(get_icons , _M444, get_icons , NULL );
+static DEVICE_ATTR(show_icon , _M220, NULL , show_icon );
+static DEVICE_ATTR(hide_icon , _M220, NULL , hide_icon );
+static DEVICE_ATTR(ringtone , _M220, NULL , store_ringtone);
+
+static struct attribute *yld_attributes[] = {
+ &dev_attr_line1.attr,
+ &dev_attr_line2.attr,
+ &dev_attr_line3.attr,
+ &dev_attr_get_icons.attr,
+ &dev_attr_show_icon.attr,
+ &dev_attr_hide_icon.attr,
+ &dev_attr_map_seg7.attr,
+ &dev_attr_ringtone.attr,
+ NULL
+};
+
+static struct attribute_group yld_attr_group = {
+ .attrs = yld_attributes
+};
+
+/*******************************************************************************
+ * Linux interface and usb initialisation
+ ******************************************************************************/
+
+struct driver_info {
+ char *name;
+};
+
+static const struct driver_info info_P1K = {
+ .name = "Yealink usb-p1k",
+};
+
+static const struct usb_device_id usb_table [] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x6993,
+ .idProduct = 0xb001,
+ .bInterfaceClass = USB_CLASS_HID,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .driver_info = (kernel_ulong_t)&info_P1K
+ },
+ { }
+};
+
+static int usb_cleanup(struct yealink_dev *yld, int err)
+{
+ if (yld == NULL)
+ return err;
+
+ usb_kill_urb(yld->urb_irq); /* parameter validation in core/urb */
+ usb_kill_urb(yld->urb_ctl); /* parameter validation in core/urb */
+
+ if (yld->idev) {
+ if (err)
+ input_free_device(yld->idev);
+ else
+ input_unregister_device(yld->idev);
+ }
+
+ usb_free_urb(yld->urb_irq);
+ usb_free_urb(yld->urb_ctl);
+
+ usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)),
+ yld->ctl_req, yld->ctl_req_dma);
+ usb_buffer_free(yld->udev, USB_PKT_LEN,
+ yld->ctl_data, yld->ctl_dma);
+ usb_buffer_free(yld->udev, USB_PKT_LEN,
+ yld->irq_data, yld->irq_dma);
+
+ kfree(yld);
+ return err;
+}
+
+static void usb_disconnect(struct usb_interface *intf)
+{
+ struct yealink_dev *yld;
+
+ down_write(&sysfs_rwsema);
+ yld = usb_get_intfdata(intf);
+ sysfs_remove_group(&intf->dev.kobj, &yld_attr_group);
+ usb_set_intfdata(intf, NULL);
+ up_write(&sysfs_rwsema);
+
+ usb_cleanup(yld, 0);
+}
+
+static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev (intf);
+ struct driver_info *nfo = (struct driver_info *)id->driver_info;
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct yealink_dev *yld;
+ struct input_dev *input_dev;
+ int ret, pipe, i;
+
+ interface = intf->cur_altsetting;
+ endpoint = &interface->endpoint[0].desc;
+ if (!usb_endpoint_is_int_in(endpoint))
+ return -ENODEV;
+
+ yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL);
+ if (!yld)
+ return -ENOMEM;
+
+ yld->udev = udev;
+
+ yld->idev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return usb_cleanup(yld, -ENOMEM);
+
+ /* allocate usb buffers */
+ yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
+ GFP_ATOMIC, &yld->irq_dma);
+ if (yld->irq_data == NULL)
+ return usb_cleanup(yld, -ENOMEM);
+
+ yld->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN,
+ GFP_ATOMIC, &yld->ctl_dma);
+ if (!yld->ctl_data)
+ return usb_cleanup(yld, -ENOMEM);
+
+ yld->ctl_req = usb_buffer_alloc(udev, sizeof(*(yld->ctl_req)),
+ GFP_ATOMIC, &yld->ctl_req_dma);
+ if (yld->ctl_req == NULL)
+ return usb_cleanup(yld, -ENOMEM);
+
+ /* allocate urb structures */
+ yld->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (yld->urb_irq == NULL)
+ return usb_cleanup(yld, -ENOMEM);
+
+ yld->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
+ if (yld->urb_ctl == NULL)
+ return usb_cleanup(yld, -ENOMEM);
+
+ /* get a handle to the interrupt data pipe */
+ pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
+ ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ if (ret != USB_PKT_LEN)
+ err("invalid payload size %d, expected %zd", ret, USB_PKT_LEN);
+
+ /* initialise irq urb */
+ usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data,
+ USB_PKT_LEN,
+ urb_irq_callback,
+ yld, endpoint->bInterval);
+ yld->urb_irq->transfer_dma = yld->irq_dma;
+ yld->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ yld->urb_irq->dev = udev;
+
+ /* initialise ctl urb */
+ yld->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+ USB_DIR_OUT;
+ yld->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
+ yld->ctl_req->wValue = cpu_to_le16(0x200);
+ yld->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
+ yld->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
+
+ usb_fill_control_urb(yld->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
+ (void *)yld->ctl_req, yld->ctl_data, USB_PKT_LEN,
+ urb_ctl_callback, yld);
+ yld->urb_ctl->setup_dma = yld->ctl_req_dma;
+ yld->urb_ctl->transfer_dma = yld->ctl_dma;
+ yld->urb_ctl->transfer_flags |= URB_NO_SETUP_DMA_MAP |
+ URB_NO_TRANSFER_DMA_MAP;
+ yld->urb_ctl->dev = udev;
+
+ /* find out the physical bus location */
+ usb_make_path(udev, yld->phys, sizeof(yld->phys));
+ strlcat(yld->phys, "/input0", sizeof(yld->phys));
+
+ /* register settings for the input device */
+ input_dev->name = nfo->name;
+ input_dev->phys = yld->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, yld);
+
+ input_dev->open = input_open;
+ input_dev->close = input_close;
+ /* input_dev->event = input_ev; TODO */
+
+ /* register available key events */
+ input_dev->evbit[0] = BIT(EV_KEY);
+ for (i = 0; i < 256; i++) {
+ int k = map_p1k_to_key(i);
+ if (k >= 0) {
+ set_bit(k & 0xff, input_dev->keybit);
+ if (k >> 8)
+ set_bit(k >> 8, input_dev->keybit);
+ }
+ }
+
+ ret = input_register_device(yld->idev);
+ if (ret)
+ return usb_cleanup(yld, ret);
+
+ usb_set_intfdata(intf, yld);
+
+ /* clear visible elements */
+ for (i = 0; i < ARRAY_SIZE(lcdMap); i++)
+ setChar(yld, i, ' ');
+
+ /* display driver version on LCD line 3 */
+ store_line3(&intf->dev, NULL,
+ DRIVER_VERSION, sizeof(DRIVER_VERSION));
+
+ /* Register sysfs hooks (don't care about failure) */
+ ret = sysfs_create_group(&intf->dev.kobj, &yld_attr_group);
+ return 0;
+}
+
+static struct usb_driver yealink_driver = {
+ .name = "yealink",
+ .probe = usb_probe,
+ .disconnect = usb_disconnect,
+ .id_table = usb_table,
+};
+
+static int __init yealink_dev_init(void)
+{
+ int ret = usb_register(&yealink_driver);
+ if (ret == 0)
+ info(DRIVER_DESC ":" DRIVER_VERSION);
+ return ret;
+}
+
+static void __exit yealink_dev_exit(void)
+{
+ usb_deregister(&yealink_driver);
+}
+
+module_init(yealink_dev_init);
+module_exit(yealink_dev_exit);
+
+MODULE_DEVICE_TABLE (usb, usb_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/yealink.h b/drivers/input/misc/yealink.h
new file mode 100644
index 00000000000..48af0be9cbd
--- /dev/null
+++ b/drivers/input/misc/yealink.h
@@ -0,0 +1,220 @@
+/*
+ * drivers/usb/input/yealink.h
+ *
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef INPUT_YEALINK_H
+#define INPUT_YEALINK_H
+
+/* Using the control channel on interface 3 various aspects of the phone
+ * can be controlled like LCD, LED, dialtone and the ringtone.
+ */
+
+struct yld_ctl_packet {
+ u8 cmd; /* command code, see below */
+ u8 size; /* 1-11, size of used data bytes. */
+ u16 offset; /* internal packet offset */
+ u8 data[11];
+ s8 sum; /* negative sum of 15 preceding bytes */
+} __attribute__ ((packed));
+
+#define USB_PKT_LEN sizeof(struct yld_ctl_packet)
+
+/* The following yld_ctl_packet's are available: */
+
+/* Init registers
+ *
+ * cmd 0x8e
+ * size 10
+ * offset 0
+ * data 0,0,0,0....
+ */
+#define CMD_INIT 0x8e
+
+/* Request key scan
+ *
+ * cmd 0x80
+ * size 1
+ * offset 0
+ * data[0] on return returns the key number, if it changes there's a new
+ * key pressed.
+ */
+#define CMD_KEYPRESS 0x80
+
+/* Request scancode
+ *
+ * cmd 0x81
+ * size 1
+ * offset key number [0-1f]
+ * data[0] on return returns the scancode
+ */
+#define CMD_SCANCODE 0x81
+
+/* Set LCD
+ *
+ * cmd 0x04
+ * size 1-11
+ * offset 0-23
+ * data segment bits
+ */
+#define CMD_LCD 0x04
+
+/* Set led
+ *
+ * cmd 0x05
+ * size 1
+ * offset 0
+ * data[0] 0 OFF / 1 ON
+ */
+#define CMD_LED 0x05
+
+/* Set ringtone volume
+ *
+ * cmd 0x11
+ * size 1
+ * offset 0
+ * data[0] 0-0xff volume
+ */
+#define CMD_RING_VOLUME 0x11
+
+/* Set ringtone notes
+ *
+ * cmd 0x02
+ * size 1-11
+ * offset 0->
+ * data binary representation LE16(-freq), LE16(duration) ....
+ */
+#define CMD_RING_NOTE 0x02
+
+/* Sound ringtone via the speaker on the back
+ *
+ * cmd 0x03
+ * size 1
+ * offset 0
+ * data[0] 0 OFF / 0x24 ON
+ */
+#define CMD_RINGTONE 0x03
+
+/* Sound dial tone via the ear speaker
+ *
+ * cmd 0x09
+ * size 1
+ * offset 0
+ * data[0] 0 OFF / 1 ON
+ */
+#define CMD_DIALTONE 0x09
+
+#endif /* INPUT_YEALINK_H */
+
+
+#if defined(_SEG) && defined(_PIC)
+/* This table maps the LCD segments onto individual bit positions in the
+ * yld_status struct.
+ */
+
+/* LCD, each segment must be driven seperately.
+ *
+ * Layout:
+ *
+ * |[] [][] [][] [][] in |[][]
+ * |[] M [][] D [][] : [][] out |[][]
+ * store
+ *
+ * NEW REP SU MO TU WE TH FR SA
+ *
+ * [] [] [] [] [] [] [] [] [] [] [] []
+ * [] [] [] [] [] [] [] [] [] [] [] []
+ */
+
+/* Line 1
+ * Format : 18.e8.M8.88...188
+ * Icon names : M D : IN OUT STORE
+ */
+#define LCD_LINE1_OFFSET 0
+#define LCD_LINE1_SIZE 17
+
+/* Note: first g then f => ! ! */
+/* _SEG( type a b c d e g f ) */
+ _SEG('1', 0,0 , 22,2 , 22,2 , 0,0 , 0,0 , 0,0 , 0,0 ),
+ _SEG('8', 20,1 , 20,2 , 20,4 , 20,8 , 21,4 , 21,2 , 21,1 ),
+ _PIC('.', 22,1 , "M" ),
+ _SEG('e', 18,1 , 18,2 , 18,4 , 18,1 , 19,2 , 18,1 , 19,1 ),
+ _SEG('8', 16,1 , 16,2 , 16,4 , 16,8 , 17,4 , 17,2 , 17,1 ),
+ _PIC('.', 15,8 , "D" ),
+ _SEG('M', 14,1 , 14,2 , 14,4 , 14,1 , 15,4 , 15,2 , 15,1 ),
+ _SEG('8', 12,1 , 12,2 , 12,4 , 12,8 , 13,4 , 13,2 , 13,1 ),
+ _PIC('.', 11,8 , ":" ),
+ _SEG('8', 10,1 , 10,2 , 10,4 , 10,8 , 11,4 , 11,2 , 11,1 ),
+ _SEG('8', 8,1 , 8,2 , 8,4 , 8,8 , 9,4 , 9,2 , 9,1 ),
+ _PIC('.', 7,1 , "IN" ),
+ _PIC('.', 7,2 , "OUT" ),
+ _PIC('.', 7,4 , "STORE" ),
+ _SEG('1', 0,0 , 5,1 , 5,1 , 0,0 , 0,0 , 0,0 , 0,0 ),
+ _SEG('8', 4,1 , 4,2 , 4,4 , 4,8 , 5,8 , 5,4 , 5,2 ),
+ _SEG('8', 2,1 , 2,2 , 2,4 , 2,8 , 3,4 , 3,2 , 3,1 ),
+
+/* Line 2
+ * Format : .........
+ * Pict. name : NEW REP SU MO TU WE TH FR SA
+ */
+#define LCD_LINE2_OFFSET LCD_LINE1_OFFSET + LCD_LINE1_SIZE
+#define LCD_LINE2_SIZE 9
+
+ _PIC('.', 23,2 , "NEW" ),
+ _PIC('.', 23,4 , "REP" ),
+ _PIC('.', 1,8 , "SU" ),
+ _PIC('.', 1,4 , "MO" ),
+ _PIC('.', 1,2 , "TU" ),
+ _PIC('.', 1,1 , "WE" ),
+ _PIC('.', 0,1 , "TH" ),
+ _PIC('.', 0,2 , "FR" ),
+ _PIC('.', 0,4 , "SA" ),
+
+/* Line 3
+ * Format : 888888888888
+ */
+#define LCD_LINE3_OFFSET LCD_LINE2_OFFSET + LCD_LINE2_SIZE
+#define LCD_LINE3_SIZE 12
+
+ _SEG('8', 22,16, 22,32, 22,64, 22,128, 23,128, 23,64, 23,32 ),
+ _SEG('8', 20,16, 20,32, 20,64, 20,128, 21,128, 21,64, 21,32 ),
+ _SEG('8', 18,16, 18,32, 18,64, 18,128, 19,128, 19,64, 19,32 ),
+ _SEG('8', 16,16, 16,32, 16,64, 16,128, 17,128, 17,64, 17,32 ),
+ _SEG('8', 14,16, 14,32, 14,64, 14,128, 15,128, 15,64, 15,32 ),
+ _SEG('8', 12,16, 12,32, 12,64, 12,128, 13,128, 13,64, 13,32 ),
+ _SEG('8', 10,16, 10,32, 10,64, 10,128, 11,128, 11,64, 11,32 ),
+ _SEG('8', 8,16, 8,32, 8,64, 8,128, 9,128, 9,64, 9,32 ),
+ _SEG('8', 6,16, 6,32, 6,64, 6,128, 7,128, 7,64, 7,32 ),
+ _SEG('8', 4,16, 4,32, 4,64, 4,128, 5,128, 5,64, 5,32 ),
+ _SEG('8', 2,16, 2,32, 2,64, 2,128, 3,128, 3,64, 3,32 ),
+ _SEG('8', 0,16, 0,32, 0,64, 0,128, 1,128, 1,64, 1,32 ),
+
+/* Line 4
+ *
+ * The LED, DIALTONE and RINGTONE are implemented as icons and use the same
+ * sysfs interface.
+ */
+#define LCD_LINE4_OFFSET LCD_LINE3_OFFSET + LCD_LINE3_SIZE
+
+ _PIC('.', offsetof(struct yld_status, led) , 0x01, "LED" ),
+ _PIC('.', offsetof(struct yld_status, dialtone) , 0x01, "DIALTONE" ),
+ _PIC('.', offsetof(struct yld_status, ringtone) , 0x24, "RINGTONE" ),
+
+#undef _SEG
+#undef _PIC
+#endif /* _SEG && _PIC */