Merge git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6:
  Add layer1 over IP support
  Add mISDN HFC multiport driver
  Add mISDN HFC PCI driver
  Add mISDN DSP
  Add mISDN core files
  Define AF_ISDN and PF_ISDN
  Add mISDN driver

1 files changed, 5320 insertions, 0 deletions

diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
new file mode 100644
index 00000000000..2649ea55a9e
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -0,0 +1,5320 @@
+/*
+ * hfcmulti.c  low level driver for hfc-4s/hfc-8s/hfc-e1 based cards
+ *
+ * Author	Andreas Eversberg (jolly@eversberg.eu)
+ * ported to mqueue mechanism:
+ *		Peter Sprenger (sprengermoving-bytes.de)
+ *
+ * inspired by existing hfc-pci driver:
+ * Copyright 1999  by Werner Cornelius (werner@isdn-development.de)
+ * Copyright 2008  by Karsten Keil (kkeil@suse.de)
+ * Copyright 2008  by Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * Thanks to Cologne Chip AG for this great controller!
+ */
+
+/*
+ * module parameters:
+ * type:
+ *	By default (0), the card is automatically detected.
+ *	Or use the following combinations:
+ *	Bit 0-7   = 0x00001 = HFC-E1 (1 port)
+ * or	Bit 0-7   = 0x00004 = HFC-4S (4 ports)
+ * or	Bit 0-7   = 0x00008 = HFC-8S (8 ports)
+ *	Bit 8     = 0x00100 = uLaw (instead of aLaw)
+ *	Bit 9     = 0x00200 = Disable DTMF detect on all B-channels via hardware
+ *	Bit 10    = spare
+ *	Bit 11    = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
+ * or   Bit 12    = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
+ *	Bit 13	  = spare
+ *	Bit 14    = 0x04000 = Use external ram (128K)
+ *	Bit 15    = 0x08000 = Use external ram (512K)
+ *	Bit 16    = 0x10000 = Use 64 timeslots instead of 32
+ * or	Bit 17    = 0x20000 = Use 128 timeslots instead of anything else
+ *	Bit 18    = spare
+ *	Bit 19    = 0x80000 = Send the Watchdog a Signal (Dual E1 with Watchdog)
+ * (all other bits are reserved and shall be 0)
+ *	example: 0x20204 one HFC-4S with dtmf detection and 128 timeslots on PCM
+ *		 bus (PCM master)
+ *
+ * port: (optional or required for all ports on all installed cards)
+ *	HFC-4S/HFC-8S only bits:
+ *	Bit 0	  = 0x001 = Use master clock for this S/T interface
+ *			    (ony once per chip).
+ *	Bit 1     = 0x002 = transmitter line setup (non capacitive mode)
+ *			    Don't use this unless you know what you are doing!
+ *	Bit 2     = 0x004 = Disable E-channel. (No E-channel processing)
+ *	example: 0x0001,0x0000,0x0000,0x0000 one HFC-4S with master clock
+ *		 received from port 1
+ *
+ *	HFC-E1 only bits:
+ *	Bit 0     = 0x0001 = interface: 0=copper, 1=optical
+ *	Bit 1     = 0x0002 = reserved (later for 32 B-channels transparent mode)
+ *	Bit 2     = 0x0004 = Report LOS
+ *	Bit 3     = 0x0008 = Report AIS
+ *	Bit 4     = 0x0010 = Report SLIP
+ *	Bit 5     = 0x0020 = Report RDI
+ *	Bit 8     = 0x0100 = Turn off CRC-4 Multiframe Mode, use double frame
+ *			     mode instead.
+ *	Bit 9	  = 0x0200 = Force get clock from interface, even in NT mode.
+ * or	Bit 10	  = 0x0400 = Force put clock to interface, even in TE mode.
+ *	Bit 11    = 0x0800 = Use direct RX clock for PCM sync rather than PLL.
+ *			     (E1 only)
+ *	Bit 12-13 = 0xX000 = elastic jitter buffer (1-3), Set both bits to 0
+ *			     for default.
+ * (all other bits are reserved and shall be 0)
+ *
+ * debug:
+ *	NOTE: only one debug value must be given for all cards
+ *	enable debugging (see hfc_multi.h for debug options)
+ *
+ * poll:
+ *	NOTE: only one poll value must be given for all cards
+ *	Give the number of samples for each fifo process.
+ *	By default 128 is used. Decrease to reduce delay, increase to
+ *	reduce cpu load. If unsure, don't mess with it!
+ *	Valid is 8, 16, 32, 64, 128, 256.
+ *
+ * pcm:
+ *	NOTE: only one pcm value must be given for every card.
+ *	The PCM bus id tells the mISDNdsp module about the connected PCM bus.
+ *	By default (0), the PCM bus id is 100 for the card that is PCM master.
+ *	If multiple cards are PCM master (because they are not interconnected),
+ *	each card with PCM master will have increasing PCM id.
+ *	All PCM busses with the same ID are expected to be connected and have
+ *	common time slots slots.
+ *	Only one chip of the PCM bus must be master, the others slave.
+ *	-1 means no support of PCM bus not even.
+ *	Omit this value, if all cards are interconnected or none is connected.
+ *	If unsure, don't give this parameter.
+ *
+ * dslot:
+ *	NOTE: only one poll value must be given for every card.
+ *	Also this value must be given for non-E1 cards. If omitted, the E1
+ *	card has D-channel on time slot 16, which is default.
+ *	If 1..15 or 17..31, an alternate time slot is used for D-channel.
+ *	In this case, the application must be able to handle this.
+ *	If -1 is given, the D-channel is disabled and all 31 slots can be used
+ *	for B-channel. (only for specific applications)
+ *	If you don't know how to use it, you don't need it!
+ *
+ * iomode:
+ *	NOTE: only one mode value must be given for every card.
+ *	-> See hfc_multi.h for HFC_IO_MODE_* values
+ *	By default, the IO mode is pci memory IO (MEMIO).
+ *	Some cards requre specific IO mode, so it cannot be changed.
+ *	It may be usefull to set IO mode to register io (REGIO) to solve
+ *	PCI bridge problems.
+ *	If unsure, don't give this parameter.
+ *
+ * clockdelay_nt:
+ *	NOTE: only one clockdelay_nt value must be given once for all cards.
+ *	Give the value of the clock control register (A_ST_CLK_DLY)
+ *	of the S/T interfaces in NT mode.
+ *	This register is needed for the TBR3 certification, so don't change it.
+ *
+ * clockdelay_te:
+ *	NOTE: only one clockdelay_te value must be given once
+ *	Give the value of the clock control register (A_ST_CLK_DLY)
+ *	of the S/T interfaces in TE mode.
+ *	This register is needed for the TBR3 certification, so don't change it.
+ */
+
+/*
+ * debug register access (never use this, it will flood your system log)
+ * #define HFC_REGISTER_DEBUG
+ */
+
+static const char *hfcmulti_revision = "2.00";
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mISDNhw.h>
+#include <linux/mISDNdsp.h>
+
+/*
+#define IRQCOUNT_DEBUG
+#define IRQ_DEBUG
+*/
+
+#include "hfc_multi.h"
+#ifdef ECHOPREP
+#include "gaintab.h"
+#endif
+
+#define	MAX_CARDS	8
+#define	MAX_PORTS	(8 * MAX_CARDS)
+
+static LIST_HEAD(HFClist);
+static spinlock_t HFClock; /* global hfc list lock */
+
+static void ph_state_change(struct dchannel *);
+static void (*hfc_interrupt)(void);
+static void (*register_interrupt)(void);
+static int (*unregister_interrupt)(void);
+static int interrupt_registered;
+
+static struct hfc_multi *syncmaster;
+int plxsd_master; /* if we have a master card (yet) */
+static spinlock_t plx_lock; /* may not acquire other lock inside */
+EXPORT_SYMBOL(plx_lock);
+
+#define	TYP_E1		1
+#define	TYP_4S		4
+#define TYP_8S		8
+
+static int poll_timer = 6;	/* default = 128 samples = 16ms */
+/* number of POLL_TIMER interrupts for G2 timeout (ca 1s) */
+static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30  };
+#define	CLKDEL_TE	0x0f	/* CLKDEL in TE mode */
+#define	CLKDEL_NT	0x6c	/* CLKDEL in NT mode
+				   (0x60 MUST be included!) */
+static u_char silence =	0xff;	/* silence by LAW */
+
+#define	DIP_4S	0x1		/* DIP Switches for Beronet 1S/2S/4S cards */
+#define	DIP_8S	0x2		/* DIP Switches for Beronet 8S+ cards */
+#define	DIP_E1	0x3		/* DIP Switches for Beronet E1 cards */
+
+/*
+ * module stuff
+ */
+
+static uint	type[MAX_CARDS];
+static uint	pcm[MAX_CARDS];
+static uint	dslot[MAX_CARDS];
+static uint	iomode[MAX_CARDS];
+static uint	port[MAX_PORTS];
+static uint	debug;
+static uint	poll;
+static uint	timer;
+static uint	clockdelay_te = CLKDEL_TE;
+static uint	clockdelay_nt = CLKDEL_NT;
+
+static int	HFC_cnt, Port_cnt, PCM_cnt = 99;
+
+MODULE_AUTHOR("Andreas Eversberg");
+MODULE_LICENSE("GPL");
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+module_param(poll, uint, S_IRUGO | S_IWUSR);
+module_param(timer, uint, S_IRUGO | S_IWUSR);
+module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR);
+module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR);
+module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(pcm, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(dslot, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
+
+#ifdef HFC_REGISTER_DEBUG
+#define HFC_outb(hc, reg, val) \
+	(hc->HFC_outb(hc, reg, val, __func__, __LINE__))
+#define HFC_outb_nodebug(hc, reg, val) \
+	(hc->HFC_outb_nodebug(hc, reg, val, __func__, __LINE__))
+#define HFC_inb(hc, reg) \
+	(hc->HFC_inb(hc, reg, __func__, __LINE__))
+#define HFC_inb_nodebug(hc, reg) \
+	(hc->HFC_inb_nodebug(hc, reg, __func__, __LINE__))
+#define HFC_inw(hc, reg) \
+	(hc->HFC_inw(hc, reg, __func__, __LINE__))
+#define HFC_inw_nodebug(hc, reg) \
+	(hc->HFC_inw_nodebug(hc, reg, __func__, __LINE__))
+#define HFC_wait(hc) \
+	(hc->HFC_wait(hc, __func__, __LINE__))
+#define HFC_wait_nodebug(hc) \
+	(hc->HFC_wait_nodebug(hc, __func__, __LINE__))
+#else
+#define HFC_outb(hc, reg, val)		(hc->HFC_outb(hc, reg, val))
+#define HFC_outb_nodebug(hc, reg, val)	(hc->HFC_outb_nodebug(hc, reg, val))
+#define HFC_inb(hc, reg)		(hc->HFC_inb(hc, reg))
+#define HFC_inb_nodebug(hc, reg)	(hc->HFC_inb_nodebug(hc, reg))
+#define HFC_inw(hc, reg)		(hc->HFC_inw(hc, reg))
+#define HFC_inw_nodebug(hc, reg)	(hc->HFC_inw_nodebug(hc, reg))
+#define HFC_wait(hc)			(hc->HFC_wait(hc))
+#define HFC_wait_nodebug(hc)		(hc->HFC_wait_nodebug(hc))
+#endif
+
+/* HFC_IO_MODE_PCIMEM */
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val,
+		const char *function, int line)
+#else
+HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val)
+#endif
+{
+	writeb(val, (hc->pci_membase)+reg);
+}
+static u_char
+#ifdef HFC_REGISTER_DEBUG
+HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inb_pcimem(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	return readb((hc->pci_membase)+reg);
+}
+static u_short
+#ifdef HFC_REGISTER_DEBUG
+HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inw_pcimem(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	return readw((hc->pci_membase)+reg);
+}
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line)
+#else
+HFC_wait_pcimem(struct hfc_multi *hc)
+#endif
+{
+	while (readb((hc->pci_membase)+R_STATUS) & V_BUSY);
+}
+
+/* HFC_IO_MODE_REGIO */
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val,
+	const char *function, int line)
+#else
+HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val)
+#endif
+{
+	outb(reg, (hc->pci_iobase)+4);
+	outb(val, hc->pci_iobase);
+}
+static u_char
+#ifdef HFC_REGISTER_DEBUG
+HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inb_regio(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	outb(reg, (hc->pci_iobase)+4);
+	return inb(hc->pci_iobase);
+}
+static u_short
+#ifdef HFC_REGISTER_DEBUG
+HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inw_regio(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	outb(reg, (hc->pci_iobase)+4);
+	return inw(hc->pci_iobase);
+}
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_wait_regio(struct hfc_multi *hc, const char *function, int line)
+#else
+HFC_wait_regio(struct hfc_multi *hc)
+#endif
+{
+	outb(R_STATUS, (hc->pci_iobase)+4);
+	while (inb(hc->pci_iobase) & V_BUSY);
+}
+
+#ifdef HFC_REGISTER_DEBUG
+static void
+HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val,
+		const char *function, int line)
+{
+	char regname[256] = "", bits[9] = "xxxxxxxx";
+	int i;
+
+	i = -1;
+	while (hfc_register_names[++i].name) {
+		if (hfc_register_names[i].reg == reg)
+			strcat(regname, hfc_register_names[i].name);
+	}
+	if (regname[0] == '\0')
+		strcpy(regname, "register");
+
+	bits[7] = '0'+(!!(val&1));
+	bits[6] = '0'+(!!(val&2));
+	bits[5] = '0'+(!!(val&4));
+	bits[4] = '0'+(!!(val&8));
+	bits[3] = '0'+(!!(val&16));
+	bits[2] = '0'+(!!(val&32));
+	bits[1] = '0'+(!!(val&64));
+	bits[0] = '0'+(!!(val&128));
+	printk(KERN_DEBUG
+	    "HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n",
+	    hc->id, reg, regname, val, bits, function, line);
+	HFC_outb_nodebug(hc, reg, val);
+}
+static u_char
+HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
+{
+	char regname[256] = "", bits[9] = "xxxxxxxx";
+	u_char val = HFC_inb_nodebug(hc, reg);
+	int i;
+
+	i = 0;
+	while (hfc_register_names[i++].name)
+		;
+	while (hfc_register_names[++i].name) {
+		if (hfc_register_names[i].reg == reg)
+			strcat(regname, hfc_register_names[i].name);
+	}
+	if (regname[0] == '\0')
+		strcpy(regname, "register");
+
+	bits[7] = '0'+(!!(val&1));
+	bits[6] = '0'+(!!(val&2));
+	bits[5] = '0'+(!!(val&4));
+	bits[4] = '0'+(!!(val&8));
+	bits[3] = '0'+(!!(val&16));
+	bits[2] = '0'+(!!(val&32));
+	bits[1] = '0'+(!!(val&64));
+	bits[0] = '0'+(!!(val&128));
+	printk(KERN_DEBUG
+	    "HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n",
+	    hc->id, reg, regname, val, bits, function, line);
+	return val;
+}
+static u_short
+HFC_inw_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
+{
+	char regname[256] = "";
+	u_short val = HFC_inw_nodebug(hc, reg);
+	int i;
+
+	i = 0;
+	while (hfc_register_names[i++].name)
+		;
+	while (hfc_register_names[++i].name) {
+		if (hfc_register_names[i].reg == reg)
+			strcat(regname, hfc_register_names[i].name);
+	}
+	if (regname[0] == '\0')
+		strcpy(regname, "register");
+
+	printk(KERN_DEBUG
+	    "HFC_inw(chip %d, %02x=%s) = 0x%04x; in %s() line %d\n",
+	    hc->id, reg, regname, val, function, line);
+	return val;
+}
+static void
+HFC_wait_debug(struct hfc_multi *hc, const char *function, int line)
+{
+	printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n",
+	    hc->id, function, line);
+	HFC_wait_nodebug(hc);
+}
+#endif
+
+/* write fifo data (REGIO) */
+void
+write_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
+{
+	outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
+	while (len>>2) {
+		outl(*(u32 *)data, hc->pci_iobase);
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		outw(*(u16 *)data, hc->pci_iobase);
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		outb(*data, hc->pci_iobase);
+		data++;
+		len--;
+	}
+}
+/* write fifo data (PCIMEM) */
+void
+write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
+{
+	while (len>>2) {
+		writel(*(u32 *)data, (hc->pci_membase)+A_FIFO_DATA0);
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		writew(*(u16 *)data, (hc->pci_membase)+A_FIFO_DATA0);
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		writeb(*data, (hc->pci_membase)+A_FIFO_DATA0);
+		data++;
+		len--;
+	}
+}
+/* read fifo data (REGIO) */
+void
+read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
+{
+	outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
+	while (len>>2) {
+		*(u32 *)data = inl(hc->pci_iobase);
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		*(u16 *)data = inw(hc->pci_iobase);
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		*data = inb(hc->pci_iobase);
+		data++;
+		len--;
+	}
+}
+
+/* read fifo data (PCIMEM) */
+void
+read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
+{
+	while (len>>2) {
+		*(u32 *)data =
+			readl((hc->pci_membase)+A_FIFO_DATA0);
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		*(u16 *)data =
+			readw((hc->pci_membase)+A_FIFO_DATA0);
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		*data = readb((hc->pci_membase)+A_FIFO_DATA0);
+		data++;
+		len--;
+	}
+}
+
+
+static void
+enable_hwirq(struct hfc_multi *hc)
+{
+	hc->hw.r_irq_ctrl |= V_GLOB_IRQ_EN;
+	HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
+}
+
+static void
+disable_hwirq(struct hfc_multi *hc)
+{
+	hc->hw.r_irq_ctrl &= ~((u_char)V_GLOB_IRQ_EN);
+	HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
+}
+
+#define	NUM_EC 2
+#define	MAX_TDM_CHAN 32
+
+
+inline void
+enablepcibridge(struct hfc_multi *c)
+{
+	HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); /* was _io before */
+}
+
+inline void
+disablepcibridge(struct hfc_multi *c)
+{
+	HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x2); /* was _io before */
+}
+
+inline unsigned char
+readpcibridge(struct hfc_multi *hc, unsigned char address)
+{
+	unsigned short cipv;
+	unsigned char data;
+
+	if (!hc->pci_iobase)
+		return 0;
+
+	/* slow down a PCI read access by 1 PCI clock cycle */
+	HFC_outb(hc, R_CTRL, 0x4); /*was _io before*/
+
+	if (address == 0)
+		cipv = 0x4000;
+	else
+		cipv = 0x5800;
+
+	/* select local bridge port address by writing to CIP port */
+	/* data = HFC_inb(c, cipv); * was _io before */
+	outw(cipv, hc->pci_iobase + 4);
+	data = inb(hc->pci_iobase);
+
+	/* restore R_CTRL for normal PCI read cycle speed */
+	HFC_outb(hc, R_CTRL, 0x0); /* was _io before */
+
+	return data;
+}
+
+inline void
+writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data)
+{
+	unsigned short cipv;
+	unsigned int datav;
+
+	if (!hc->pci_iobase)
+		return;
+
+	if (address == 0)
+		cipv = 0x4000;
+	else
+		cipv = 0x5800;
+
+	/* select local bridge port address by writing to CIP port */
+	outw(cipv, hc->pci_iobase + 4);
+	/* define a 32 bit dword with 4 identical bytes for write sequence */
+	datav = data | ((__u32) data << 8) | ((__u32) data << 16) |
+	    ((__u32) data << 24);
+
+	/*
+	 * write this 32 bit dword to the bridge data port
+	 * this will initiate a write sequence of up to 4 writes to the same
+	 * address on the local bus interface the number of write accesses
+	 * is undefined but >=1 and depends on the next PCI transaction
+	 * during write sequence on the local bus
+	 */
+	outl(datav, hc->pci_iobase);
+}
+
+inline void
+cpld_set_reg(struct hfc_multi *hc, unsigned char reg)
+{
+	/* Do data pin read low byte */
+	HFC_outb(hc, R_GPIO_OUT1, reg);
+}
+
+inline void
+cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val)
+{
+	cpld_set_reg(hc, reg);
+
+	enablepcibridge(hc);
+	writepcibridge(hc, 1, val);
+	disablepcibridge(hc);
+
+	return;
+}
+
+inline unsigned char
+cpld_read_reg(struct hfc_multi *hc, unsigned char reg)
+{
+	unsigned char bytein;
+
+	cpld_set_reg(hc, reg);
+
+	/* Do data pin read low byte */
+	HFC_outb(hc, R_GPIO_OUT1, reg);
+
+	enablepcibridge(hc);
+	bytein = readpcibridge(hc, 1);
+	disablepcibridge(hc);
+
+	return bytein;
+}
+
+inline void
+vpm_write_address(struct hfc_multi *hc, unsigned short addr)
+{
+	cpld_write_reg(hc, 0, 0xff & addr);
+	cpld_write_reg(hc, 1, 0x01 & (addr >> 8));
+}
+
+inline unsigned short
+vpm_read_address(struct hfc_multi *c)
+{
+	unsigned short addr;
+	unsigned short highbit;
+
+	addr = cpld_read_reg(c, 0);
+	highbit = cpld_read_reg(c, 1);
+
+	addr = addr | (highbit << 8);
+
+	return addr & 0x1ff;
+}
+
+inline unsigned char
+vpm_in(struct hfc_multi *c, int which, unsigned short addr)
+{
+	unsigned char res;
+
+	vpm_write_address(c, addr);
+
+	if (!which)
+		cpld_set_reg(c, 2);
+	else
+		cpld_set_reg(c, 3);
+
+	enablepcibridge(c);
+	res = readpcibridge(c, 1);
+	disablepcibridge(c);
+
+	cpld_set_reg(c, 0);
+
+	return res;
+}
+
+inline void
+vpm_out(struct hfc_multi *c, int which, unsigned short addr,
+    unsigned char data)
+{
+	vpm_write_address(c, addr);
+
+	enablepcibridge(c);
+
+	if (!which)
+		cpld_set_reg(c, 2);
+	else
+		cpld_set_reg(c, 3);
+
+	writepcibridge(c, 1, data);
+
+	cpld_set_reg(c, 0);
+
+	disablepcibridge(c);
+
+	{
+	unsigned char regin;
+	regin = vpm_in(c, which, addr);
+	if (regin != data)
+		printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back "
+			"0x%x\n", data, addr, regin);
+	}
+
+}
+
+
+void
+vpm_init(struct hfc_multi *wc)
+{
+	unsigned char reg;
+	unsigned int mask;
+	unsigned int i, x, y;
+	unsigned int ver;
+
+	for (x = 0; x < NUM_EC; x++) {
+		/* Setup GPIO's */
+		if (!x) {
+			ver = vpm_in(wc, x, 0x1a0);
+			printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver);
+		}
+
+		for (y = 0; y < 4; y++) {
+			vpm_out(wc, x, 0x1a8 + y, 0x00); /* GPIO out */
+			vpm_out(wc, x, 0x1ac + y, 0x00); /* GPIO dir */
+			vpm_out(wc, x, 0x1b0 + y, 0x00); /* GPIO sel */
+		}
+
+		/* Setup TDM path - sets fsync and tdm_clk as inputs */
+		reg = vpm_in(wc, x, 0x1a3); /* misc_con */
+		vpm_out(wc, x, 0x1a3, reg & ~2);
+
+		/* Setup Echo length (256 taps) */
+		vpm_out(wc, x, 0x022, 1);
+		vpm_out(wc, x, 0x023, 0xff);
+
+		/* Setup timeslots */
+		vpm_out(wc, x, 0x02f, 0x00);
+		mask = 0x02020202 << (x * 4);
+
+		/* Setup the tdm channel masks for all chips */
+		for (i = 0; i < 4; i++)
+			vpm_out(wc, x, 0x33 - i, (mask >> (i << 3)) & 0xff);
+
+		/* Setup convergence rate */
+		printk(KERN_DEBUG "VPM: A-law mode\n");
+		reg = 0x00 | 0x10 | 0x01;
+		vpm_out(wc, x, 0x20, reg);
+		printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg);
+		/*vpm_out(wc, x, 0x20, (0x00 | 0x08 | 0x20 | 0x10)); */
+
+		vpm_out(wc, x, 0x24, 0x02);
+		reg = vpm_in(wc, x, 0x24);
+		printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg);
+
+		/* Initialize echo cans */
+		for (i = 0; i < MAX_TDM_CHAN; i++) {
+			if (mask & (0x00000001 << i))
+				vpm_out(wc, x, i, 0x00);
+		}
+
+		/*
+		 * ARM arch at least disallows a udelay of
+		 * more than 2ms... it gives a fake "__bad_udelay"
+		 * reference at link-time.
+		 * long delays in kernel code are pretty sucky anyway
+		 * for now work around it using 5 x 2ms instead of 1 x 10ms
+		 */
+
+		udelay(2000);
+		udelay(2000);
+		udelay(2000);
+		udelay(2000);
+		udelay(2000);
+
+		/* Put in bypass mode */
+		for (i = 0; i < MAX_TDM_CHAN; i++) {
+			if (mask & (0x00000001 << i))
+				vpm_out(wc, x, i, 0x01);
+		}
+
+		/* Enable bypass */
+		for (i = 0; i < MAX_TDM_CHAN; i++) {
+			if (mask & (0x00000001 << i))
+				vpm_out(wc, x, 0x78 + i, 0x01);
+		}
+
+	}
+}
+
+void
+vpm_check(struct hfc_multi *hctmp)
+{
+	unsigned char gpi2;
+
+	gpi2 = HFC_inb(hctmp, R_GPI_IN2);
+
+	if ((gpi2 & 0x3) != 0x3)
+		printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2);
+}
+
+
+/*
+ * Interface to enable/disable the HW Echocan
+ *
+ * these functions are called within a spin_lock_irqsave on
+ * the channel instance lock, so we are not disturbed by irqs
+ *
+ * we can later easily change the interface to make  other
+ * things configurable, for now we configure the taps
+ *
+ */
+
+void
+vpm_echocan_on(struct hfc_multi *hc, int ch, int taps)
+{
+	unsigned int timeslot;
+	unsigned int unit;
+	struct bchannel *bch = hc->chan[ch].bch;
+#ifdef TXADJ
+	int txadj = -4;
+	struct sk_buff *skb;
+#endif
+	if (hc->chan[ch].protocol != ISDN_P_B_RAW)
+		return;
+
+	if (!bch)
+		return;
+
+#ifdef TXADJ
+	skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
+		sizeof(int), &txadj, GFP_ATOMIC);
+	if (skb)
+		recv_Bchannel_skb(bch, skb);
+#endif
+
+	timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
+	unit = ch % 4;
+
+	printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n",
+	    taps, timeslot);
+
+	vpm_out(hc, unit, timeslot, 0x7e);
+}
+
+void
+vpm_echocan_off(struct hfc_multi *hc, int ch)
+{
+	unsigned int timeslot;
+	unsigned int unit;
+	struct bchannel *bch = hc->chan[ch].bch;
+#ifdef TXADJ
+	int txadj = 0;
+	struct sk_buff *skb;
+#endif
+
+	if (hc->chan[ch].protocol != ISDN_P_B_RAW)
+		return;
+
+	if (!bch)
+		return;
+
+#ifdef TXADJ
+	skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
+		sizeof(int), &txadj, GFP_ATOMIC);
+	if (skb)
+		recv_Bchannel_skb(bch, skb);
+#endif
+
+	timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
+	unit = ch % 4;
+
+	printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n",
+	    timeslot);
+	/* FILLME */
+	vpm_out(hc, unit, timeslot, 0x01);
+}
+
+
+/*
+ * Speech Design resync feature
+ * NOTE: This is called sometimes outside interrupt handler.
+ * We must lock irqsave, so no other interrupt (other card) will occurr!
+ * Also multiple interrupts may nest, so must lock each access (lists, card)!
+ */
+static inline void
+hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
+{
+	struct hfc_multi *hc, *next, *pcmmaster = 0;
+	u_int *plx_acc_32, pv;
+	u_long flags;
+
+	spin_lock_irqsave(&HFClock, flags);
+	spin_lock(&plx_lock); /* must be locked inside other locks */
+
+	if (debug & DEBUG_HFCMULTI_PLXSD)
+		printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n",
+			__func__, syncmaster);
+
+	/* select new master */
+	if (newmaster) {
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "using provided controller\n");
+	} else {
+		list_for_each_entry_safe(hc, next, &HFClist, list) {
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+				if (hc->syncronized) {
+					newmaster = hc;
+					break;
+				}
+			}
+		}
+	}
+
+	/* Disable sync of all cards */
+	list_for_each_entry_safe(hc, next, &HFClist, list) {
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+			pv = readl(plx_acc_32);
+			pv &= ~PLX_SYNC_O_EN;
+			writel(pv, plx_acc_32);
+			if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
+				pcmmaster = hc;
+				if (hc->type == 1) {
+					if (debug & DEBUG_HFCMULTI_PLXSD)
+						printk(KERN_DEBUG
+							"Schedule SYNC_I\n");
+					hc->e1_resync |= 1; /* get SYNC_I */
+				}
+			}
+		}
+	}
+
+	if (newmaster) {
+		hc = newmaster;
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
+				"interface.\n", hc->id, hc);
+		/* Enable new sync master */
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		pv = readl(plx_acc_32);
+		pv |= PLX_SYNC_O_EN;
+		writel(pv, plx_acc_32);
+		/* switch to jatt PLL, if not disabled by RX_SYNC */
+		if (hc->type == 1 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "Schedule jatt PLL\n");
+			hc->e1_resync |= 2; /* switch to jatt */
+		}
+	} else {
+		if (pcmmaster) {
+			hc = pcmmaster;
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG
+					"id=%d (0x%p) = PCM master syncronized "
+					"with QUARTZ\n", hc->id, hc);
+			if (hc->type == 1) {
+				/* Use the crystal clock for the PCM
+				   master card */
+				if (debug & DEBUG_HFCMULTI_PLXSD)
+					printk(KERN_DEBUG
+					    "Schedule QUARTZ for HFC-E1\n");
+				hc->e1_resync |= 4; /* switch quartz */
+			} else {
+				if (debug & DEBUG_HFCMULTI_PLXSD)
+					printk(KERN_DEBUG
+					    "QUARTZ is automatically "
+					    "enabled by HFC-%dS\n", hc->type);
+			}
+			plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+			pv = readl(plx_acc_32);
+			pv |= PLX_SYNC_O_EN;
+			writel(pv, plx_acc_32);
+		} else
+			if (!rm)
+				printk(KERN_ERR "%s no pcm master, this MUST "
+					"not happen!\n", __func__);
+	}
+	syncmaster = newmaster;
+
+	spin_unlock(&plx_lock);
+	spin_unlock_irqrestore(&HFClock, flags);
+}
+
+/* This must be called AND hc must be locked irqsave!!! */
+inline void
+plxsd_checksync(struct hfc_multi *hc, int rm)
+{
+	if (hc->syncronized) {
+		if (syncmaster == NULL) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_WARNING "%s: GOT sync on card %d"
+					" (id=%d)\n", __func__, hc->id + 1,
+					hc->id);
+			hfcmulti_resync(hc, hc, rm);
+		}
+	} else {
+		if (syncmaster == hc) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_WARNING "%s: LOST sync on card %d"
+					" (id=%d)\n", __func__, hc->id + 1,
+					hc->id);
+			hfcmulti_resync(hc, NULL, rm);
+		}
+	}
+}
+
+
+/*
+ * free hardware resources used by driver
+ */
+static void
+release_io_hfcmulti(struct hfc_multi *hc)
+{
+	u_int	*plx_acc_32, pv;
+	u_long	plx_flags;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+
+	/* soft reset also masks all interrupts */
+	hc->hw.r_cirm |= V_SRES;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(1000);
+	hc->hw.r_cirm &= ~V_SRES;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(1000); /* instead of 'wait' that may cause locking */
+
+	/* release Speech Design card, if PLX was initialized */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && hc->plx_membase) {
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "%s: release PLXSD card %d\n",
+			    __func__, hc->id + 1);
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		writel(PLX_GPIOC_INIT, plx_acc_32);
+		pv = readl(plx_acc_32);
+		/* Termination off */
+		pv &= ~PLX_TERM_ON;
+		/* Disconnect the PCM */
+		pv |= PLX_SLAVE_EN_N;
+		pv &= ~PLX_MASTER_EN;
+		pv &= ~PLX_SYNC_O_EN;
+		/* Put the DSP in Reset */
+		pv &= ~PLX_DSP_RES_N;
+		writel(pv, plx_acc_32);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: PCM off: PLX_GPIO=%x\n",
+				__func__, pv);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	/* disable memory mapped ports / io ports */
+	test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */
+	pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
+	if (hc->pci_membase)
+		iounmap((void *)hc->pci_membase);
+	if (hc->plx_membase)
+		iounmap((void *)hc->plx_membase);
+	if (hc->pci_iobase)
+		release_region(hc->pci_iobase, 8);
+
+	if (hc->pci_dev) {
+		pci_disable_device(hc->pci_dev);
+		pci_set_drvdata(hc->pci_dev, NULL);
+	}
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done\n", __func__);
+}
+
+/*
+ * function called to reset the HFC chip. A complete software reset of chip
+ * and fifos is done. All configuration of the chip is done.
+ */
+
+static int
+init_chip(struct hfc_multi *hc)
+{
+	u_long			flags, val, val2 = 0, rev;
+	int			i, err = 0;
+	u_char			r_conf_en, rval;
+	u_int			*plx_acc_32, pv;
+	u_long			plx_flags, hfc_flags;
+	int			plx_count;
+	struct hfc_multi	*pos, *next, *plx_last_hc;
+
+	spin_lock_irqsave(&hc->lock, flags);
+	/* reset all registers */
+	memset(&hc->hw, 0, sizeof(struct hfcm_hw));
+
+	/* revision check */
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+	val = HFC_inb(hc, R_CHIP_ID)>>4;
+	if (val != 0x8 && val != 0xc && val != 0xe) {
+		printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val);
+		err = -EIO;
+		goto out;
+	}
+	rev = HFC_inb(hc, R_CHIP_RV);
+	printk(KERN_INFO
+	    "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n",
+	    val, rev, (rev == 0) ? " (old FIFO handling)" : "");
+	if (rev == 0) {
+		test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip);
+		printk(KERN_WARNING
+		    "HFC_multi: NOTE: Your chip is revision 0, "
+		    "ask Cologne Chip for update. Newer chips "
+		    "have a better FIFO handling. Old chips "
+		    "still work but may have slightly lower "
+		    "HDLC transmit performance.\n");
+	}
+	if (rev > 1) {
+		printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't "
+		    "consider chip revision = %ld. The chip / "
+		    "bridge may not work.\n", rev);
+	}
+
+	/* set s-ram size */
+	hc->Flen = 0x10;
+	hc->Zmin = 0x80;
+	hc->Zlen = 384;
+	hc->DTMFbase = 0x1000;
+	if (test_bit(HFC_CHIP_EXRAM_128, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: changing to 128K extenal RAM\n",
+			    __func__);
+		hc->hw.r_ctrl |= V_EXT_RAM;
+		hc->hw.r_ram_sz = 1;
+		hc->Flen = 0x20;
+		hc->Zmin = 0xc0;
+		hc->Zlen = 1856;
+		hc->DTMFbase = 0x2000;
+	}
+	if (test_bit(HFC_CHIP_EXRAM_512, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: changing to 512K extenal RAM\n",
+			    __func__);
+		hc->hw.r_ctrl |= V_EXT_RAM;
+		hc->hw.r_ram_sz = 2;
+		hc->Flen = 0x20;
+		hc->Zmin = 0xc0;
+		hc->Zlen = 8000;
+		hc->DTMFbase = 0x2000;
+	}
+	hc->max_trans = poll << 1;
+	if (hc->max_trans > hc->Zlen)
+		hc->max_trans = hc->Zlen;
+
+	/* Speech Design PLX bridge */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "%s: initializing PLXSD card %d\n",
+			    __func__, hc->id + 1);
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		writel(PLX_GPIOC_INIT, plx_acc_32);
+		pv = readl(plx_acc_32);
+		/* The first and the last cards are terminating the PCM bus */
+		pv |= PLX_TERM_ON; /* hc is currently the last */
+		/* Disconnect the PCM */
+		pv |= PLX_SLAVE_EN_N;
+		pv &= ~PLX_MASTER_EN;
+		pv &= ~PLX_SYNC_O_EN;
+		/* Put the DSP in Reset */
+		pv &= ~PLX_DSP_RES_N;
+		writel(pv, plx_acc_32);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: slave/term: PLX_GPIO=%x\n",
+				__func__, pv);
+		/*
+		 * If we are the 3rd PLXSD card or higher, we must turn
+		 * termination of last PLXSD card off.
+		 */
+		spin_lock_irqsave(&HFClock, hfc_flags);
+		plx_count = 0;
+		plx_last_hc = NULL;
+		list_for_each_entry_safe(pos, next, &HFClist, list) {
+			if (test_bit(HFC_CHIP_PLXSD, &pos->chip)) {
+				plx_count++;
+				if (pos != hc)
+					plx_last_hc = pos;
+			}
+		}
+		if (plx_count >= 3) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "%s: card %d is between, so "
+					"we disable termination\n",
+				    __func__, plx_last_hc->id + 1);
+			spin_lock_irqsave(&plx_lock, plx_flags);
+			plx_acc_32 = (u_int *)(plx_last_hc->plx_membase
+					+ PLX_GPIOC);
+			pv = readl(plx_acc_32);
+			pv &= ~PLX_TERM_ON;
+			writel(pv, plx_acc_32);
+			spin_unlock_irqrestore(&plx_lock, plx_flags);
+			if (debug & DEBUG_HFCMULTI_INIT)
+			    printk(KERN_WARNING "%s: term off: PLX_GPIO=%x\n",
+					__func__, pv);
+		}
+		spin_unlock_irqrestore(&HFClock, hfc_flags);
+		hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
+	}
+
+	/* we only want the real Z2 read-pointer for revision > 0 */
+	if (!test_bit(HFC_CHIP_REVISION0, &hc->chip))
+		hc->hw.r_ram_sz |= V_FZ_MD;
+
+	/* select pcm mode */
+	if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: setting PCM into slave mode\n",
+			    __func__);
+	} else
+	if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) && !plxsd_master) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: setting PCM into master mode\n",
+			    __func__);
+		hc->hw.r_pcm_md0 |= V_PCM_MD;
+	} else {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: performing PCM auto detect\n",
+			    __func__);
+	}
+
+	/* soft reset */
+	HFC_outb(hc, R_CTRL, hc->hw.r_ctrl);
+	HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+	HFC_outb(hc, R_FIFO_MD, 0);
+	hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | V_RLD_EPR;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(100);
+	hc->hw.r_cirm = 0;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(100);
+	HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+
+	/* Speech Design PLX bridge pcm and sync mode */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		pv = readl(plx_acc_32);
+		/* Connect PCM */
+		if (hc->hw.r_pcm_md0 & V_PCM_MD) {
+			pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
+			pv |= PLX_SYNC_O_EN;
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_WARNING "%s: master: PLX_GPIO=%x\n",
+					__func__, pv);
+		} else {
+			pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N);
+			pv &= ~PLX_SYNC_O_EN;
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_WARNING "%s: slave: PLX_GPIO=%x\n",
+					__func__, pv);
+		}
+		writel(pv, plx_acc_32);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	/* PCM setup */
+	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x90);
+	if (hc->slots == 32)
+		HFC_outb(hc, R_PCM_MD1, 0x00);
+	if (hc->slots == 64)
+		HFC_outb(hc, R_PCM_MD1, 0x10);
+	if (hc->slots == 128)
+		HFC_outb(hc, R_PCM_MD1, 0x20);
+	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0);
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+		HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */
+	else
+		HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */
+	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
+	for (i = 0; i < 256; i++) {
+		HFC_outb_nodebug(hc, R_SLOT, i);
+		HFC_outb_nodebug(hc, A_SL_CFG, 0);
+		HFC_outb_nodebug(hc, A_CONF, 0);
+		hc->slot_owner[i] = -1;
+	}
+
+	/* set clock speed */
+	if (test_bit(HFC_CHIP_CLOCK2, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: setting double clock\n", __func__);
+		HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+	}
+
+	/* B410P GPIO */
+	if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+		printk(KERN_NOTICE "Setting GPIOs\n");
+		HFC_outb(hc, R_GPIO_SEL, 0x30);
+		HFC_outb(hc, R_GPIO_EN1, 0x3);
+		udelay(1000);
+		printk(KERN_NOTICE "calling vpm_init\n");
+		vpm_init(hc);
+	}
+
+	/* check if R_F0_CNT counts (8 kHz frame count) */
+	val = HFC_inb(hc, R_F0_CNTL);
+	val += HFC_inb(hc, R_F0_CNTH) << 8;
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG
+		    "HFC_multi F0_CNT %ld after reset\n", val);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout((HZ/100)?:1); /* Timeout minimum 10ms */
+	spin_lock_irqsave(&hc->lock, flags);
+	val2 = HFC_inb(hc, R_F0_CNTL);
+	val2 += HFC_inb(hc, R_F0_CNTH) << 8;
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG
+			"HFC_multi F0_CNT %ld after 10 ms (1st try)\n",
+		    val2);
+	if (val2 >= val+8) { /* 1 ms */
+		/* it counts, so we keep the pcm mode */
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
+			printk(KERN_INFO "controller is PCM bus MASTER\n");
+		else
+		if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip))
+			printk(KERN_INFO "controller is PCM bus SLAVE\n");
+		else {
+			test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+			printk(KERN_INFO "controller is PCM bus SLAVE "
+				"(auto detected)\n");
+		}
+	} else {
+		/* does not count */
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
+controller_fail:
+			printk(KERN_ERR "HFC_multi ERROR, getting no 125us "
+			    "pulse. Seems that controller fails.\n");
+			err = -EIO;
+			goto out;
+		}
+		if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+			printk(KERN_INFO "controller is PCM bus SLAVE "
+				"(ignoring missing PCM clock)\n");
+		} else {
+			/* only one pcm master */
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
+				&& plxsd_master) {
+				printk(KERN_ERR "HFC_multi ERROR, no clock "
+				    "on another Speech Design card found. "
+				    "Please be sure to connect PCM cable.\n");
+				err = -EIO;
+				goto out;
+			}
+			/* retry with master clock */
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+				spin_lock_irqsave(&plx_lock, plx_flags);
+				plx_acc_32 = (u_int *)(hc->plx_membase +
+					PLX_GPIOC);
+				pv = readl(plx_acc_32);
+				pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
+				pv |= PLX_SYNC_O_EN;
+				writel(pv, plx_acc_32);
+				spin_unlock_irqrestore(&plx_lock, plx_flags);
+				if (debug & DEBUG_HFCMULTI_INIT)
+				    printk(KERN_WARNING "%s: master: PLX_GPIO"
+					"=%x\n", __func__, pv);
+			}
+			hc->hw.r_pcm_md0 |= V_PCM_MD;
+			HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
+			spin_unlock_irqrestore(&hc->lock, flags);
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule_timeout((HZ/100)?:1); /* Timeout min. 10ms */
+			spin_lock_irqsave(&hc->lock, flags);
+			val2 = HFC_inb(hc, R_F0_CNTL);
+			val2 += HFC_inb(hc, R_F0_CNTH) << 8;
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG "HFC_multi F0_CNT %ld after "
+					"10 ms (2nd try)\n", val2);
+			if (val2 >= val+8) { /* 1 ms */
+				test_and_set_bit(HFC_CHIP_PCM_MASTER,
+					&hc->chip);
+				printk(KERN_INFO "controller is PCM bus MASTER "
+					"(auto detected)\n");
+			} else
+				goto controller_fail;
+		}
+	}
+
+	/* Release the DSP Reset */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
+			plxsd_master = 1;
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		pv = readl(plx_acc_32);
+		pv |=  PLX_DSP_RES_N;
+		writel(pv, plx_acc_32);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: reset off: PLX_GPIO=%x\n",
+				__func__, pv);
+	}
+
+	/* pcm id */
+	if (hc->pcm)
+		printk(KERN_INFO "controller has given PCM BUS ID %d\n",
+			hc->pcm);
+	else {
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)
+		 || test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			PCM_cnt++; /* SD has proprietary bridging */
+		}
+		hc->pcm = PCM_cnt;
+		printk(KERN_INFO "controller has PCM BUS ID %d "
+			"(auto selected)\n", hc->pcm);
+	}
+
+	/* set up timer */
+	HFC_outb(hc, R_TI_WD, poll_timer);
+	hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
+
+	/*
+	 * set up 125us interrupt, only if function pointer is available
+	 * and module parameter timer is set
+	 */
+	if (timer && hfc_interrupt && register_interrupt) {
+		/* only one chip should use this interrupt */
+		timer = 0;
+		interrupt_registered = 1;
+		hc->hw.r_irqmsk_misc |= V_PROC_IRQMSK;
+		/* deactivate other interrupts in ztdummy */
+		register_interrupt();
+	}
+
+	/* set E1 state machine IRQ */
+	if (hc->type == 1)
+		hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
+
+	/* set DTMF detection */
+	if (test_bit(HFC_CHIP_DTMF, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: enabling DTMF detection "
+			    "for all B-channel\n", __func__);
+		hc->hw.r_dtmf = V_DTMF_EN | V_DTMF_STOP;
+		if (test_bit(HFC_CHIP_ULAW, &hc->chip))
+			hc->hw.r_dtmf |= V_ULAW_SEL;
+		HFC_outb(hc, R_DTMF_N, 102 - 1);
+		hc->hw.r_irqmsk_misc |= V_DTMF_IRQMSK;
+	}
+
+	/* conference engine */
+	if (test_bit(HFC_CHIP_ULAW, &hc->chip))
+		r_conf_en = V_CONF_EN | V_ULAW;
+	else
+		r_conf_en = V_CONF_EN;
+	HFC_outb(hc, R_CONF_EN, r_conf_en);
+
+	/* setting leds */
+	switch (hc->leds) {
+	case 1: /* HFC-E1 OEM */
+		if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
+			HFC_outb(hc, R_GPIO_SEL, 0x32);
+		else
+			HFC_outb(hc, R_GPIO_SEL, 0x30);
+
+		HFC_outb(hc, R_GPIO_EN1, 0x0f);
+		HFC_outb(hc, R_GPIO_OUT1, 0x00);
+
+		HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
+		break;
+
+	case 2: /* HFC-4S OEM */
+	case 3:
+		HFC_outb(hc, R_GPIO_SEL, 0xf0);
+		HFC_outb(hc, R_GPIO_EN1, 0xff);
+		HFC_outb(hc, R_GPIO_OUT1, 0x00);
+		break;
+	}
+
+	/* set master clock */
+	if (hc->masterclk >= 0) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: setting ST master clock "
+			    "to port %d (0..%d)\n",
+			    __func__, hc->masterclk, hc->ports-1);
+		hc->hw.r_st_sync = hc->masterclk | V_AUTO_SYNC;
+		HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
+	}
+
+	/* setting misc irq */
+	HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc);
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n",
+		    hc->hw.r_irqmsk_misc);
+
+	/* RAM access test */
+	HFC_outb(hc, R_RAM_ADDR0, 0);
+	HFC_outb(hc, R_RAM_ADDR1, 0);
+	HFC_outb(hc, R_RAM_ADDR2, 0);
+	for (i = 0; i < 256; i++) {
+		HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
+		HFC_outb_nodebug(hc, R_RAM_DATA, ((i*3)&0xff));
+	}
+	for (i = 0; i < 256; i++) {
+		HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
+		HFC_inb_nodebug(hc, R_RAM_DATA);
+		rval = HFC_inb_nodebug(hc, R_INT_DATA);
+		if (rval != ((i * 3) & 0xff)) {
+			printk(KERN_DEBUG
+			    "addr:%x val:%x should:%x\n", i, rval,
+			    (i * 3) & 0xff);
+			err++;
+		}
+	}
+	if (err) {
+		printk(KERN_DEBUG "aborting - %d RAM access errors\n", err);
+		err = -EIO;
+		goto out;
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done\n", __func__);
+out:
+	spin_unlock_irqrestore(&hc->lock, flags);
+	return err;
+}
+
+
+/*
+ * control the watchdog
+ */
+static void
+hfcmulti_watchdog(struct hfc_multi *hc)
+{
+	hc->wdcount++;
+
+	if (hc->wdcount > 10) {
+		hc->wdcount = 0;
+		hc->wdbyte = hc->wdbyte == V_GPIO_OUT2 ?
+		    V_GPIO_OUT3 : V_GPIO_OUT2;
+
+	/* printk("Sending Watchdog Kill %x\n",hc->wdbyte); */
+		HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
+		HFC_outb(hc, R_GPIO_OUT0, hc->wdbyte);
+	}
+}
+
+
+
+/*
+ * output leds
+ */
+static void
+hfcmulti_leds(struct hfc_multi *hc)
+{
+	unsigned long lled;
+	unsigned long leddw;
+	int i, state, active, leds;
+	struct dchannel *dch;
+	int led[4];
+
+	hc->ledcount += poll;
+	if (hc->ledcount > 4096) {
+		hc->ledcount -= 4096;
+		hc->ledstate = 0xAFFEAFFE;
+	}
+
+	switch (hc->leds) {
+	case 1: /* HFC-E1 OEM */
+		/* 2 red blinking: NT mode deactivate
+		 * 2 red steady:   TE mode deactivate
+		 * left green:     L1 active
+		 * left red:       frame sync, but no L1
+		 * right green:    L2 active
+		 */
+		if (hc->chan[hc->dslot].sync != 2) { /* no frame sync */
+			if (hc->chan[hc->dslot].dch->dev.D.protocol
+				!= ISDN_P_NT_E1) {
+				led[0] = 1;
+				led[1] = 1;
+			} else if (hc->ledcount>>11) {
+				led[0] = 1;
+				led[1] = 1;
+			} else {
+				led[0] = 0;
+				led[1] = 0;
+			}
+			led[2] = 0;
+			led[3] = 0;
+		} else { /* with frame sync */
+			/* TODO make it work */
+			led[0] = 0;
+			led[1] = 0;
+			led[2] = 0;
+			led[3] = 1;
+		}
+		leds = (led[0] | (led[1]<<2) | (led[2]<<1) | (led[3]<<3))^0xF;
+			/* leds are inverted */
+		if (leds != (int)hc->ledstate) {
+			HFC_outb_nodebug(hc, R_GPIO_OUT1, leds);
+			hc->ledstate = leds;
+		}
+		break;
+
+	case 2: /* HFC-4S OEM */
+		/* red blinking = PH_DEACTIVATE NT Mode
+		 * red steady   = PH_DEACTIVATE TE Mode
+		 * green steady = PH_ACTIVATE
+		 */
+		for (i = 0; i < 4; i++) {
+			state = 0;
+			active = -1;
+			dch = hc->chan[(i << 2) | 2].dch;
+			if (dch) {
+				state = dch->state;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+			}
+			if (state) {
+				if (state == active) {
+					led[i] = 1; /* led green */
+				} else
+					if (dch->dev.D.protocol == ISDN_P_TE_S0)
+						/* TE mode: led red */
+						led[i] = 2;
+					else
+						if (hc->ledcount>>11)
+							/* led red */
+							led[i] = 2;
+						else
+							/* led off */
+							led[i] = 0;
+			} else
+				led[i] = 0; /* led off */
+		}
+		if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+			leds = 0;
+			for (i = 0; i < 4; i++) {
+				if (led[i] == 1) {
+					/*green*/
+					leds |= (0x2 << (i * 2));
+				} else if (led[i] == 2) {
+					/*red*/
+					leds |= (0x1 << (i * 2));
+				}
+			}
+			if (leds != (int)hc->ledstate) {
+				vpm_out(hc, 0, 0x1a8 + 3, leds);
+				hc->ledstate = leds;
+			}
+		} else {
+			leds = ((led[3] > 0) << 0) | ((led[1] > 0) << 1) |
+			    ((led[0] > 0) << 2) | ((led[2] > 0) << 3) |
+			    ((led[3] & 1) << 4) | ((led[1] & 1) << 5) |
+			    ((led[0] & 1) << 6) | ((led[2] & 1) << 7);
+			if (leds != (int)hc->ledstate) {
+				HFC_outb_nodebug(hc, R_GPIO_EN1, leds & 0x0F);
+				HFC_outb_nodebug(hc, R_GPIO_OUT1, leds >> 4);
+				hc->ledstate = leds;
+			}
+		}
+		break;
+
+	case 3: /* HFC 1S/2S Beronet */
+		/* red blinking = PH_DEACTIVATE NT Mode
+		 * red steady   = PH_DEACTIVATE TE Mode
+		 * green steady = PH_ACTIVATE
+		 */
+		for (i = 0; i < 2; i++) {
+			state = 0;
+			active = -1;
+			dch = hc->chan[(i << 2) | 2].dch;
+			if (dch) {
+				state = dch->state;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+			}
+			if (state) {
+				if (state == active) {
+					led[i] = 1; /* led green */
+				} else
+					if (dch->dev.D.protocol == ISDN_P_TE_S0)
+						/* TE mode: led red */
+						led[i] = 2;
+					else
+						if (hc->ledcount >> 11)
+							/* led red */
+							led[i] = 2;
+						else
+							/* led off */
+							led[i] = 0;
+			} else
+				led[i] = 0; /* led off */
+		}
+
+
+		leds = (led[0] > 0) | ((led[1] > 0)<<1) | ((led[0]&1)<<2)
+			| ((led[1]&1)<<3);
+		if (leds != (int)hc->ledstate) {
+			HFC_outb_nodebug(hc, R_GPIO_EN1,
+			    ((led[0] > 0) << 2) | ((led[1] > 0) << 3));
+			HFC_outb_nodebug(hc, R_GPIO_OUT1,
+			    ((led[0] & 1) << 2) | ((led[1] & 1) << 3));
+			hc->ledstate = leds;
+		}
+		break;
+	case 8: /* HFC 8S+ Beronet */
+		lled = 0;
+
+		for (i = 0; i < 8; i++) {
+			state = 0;
+			active = -1;
+			dch = hc->chan[(i << 2) | 2].dch;
+			if (dch) {
+				state = dch->state;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+			}
+			if (state) {
+				if (state == active) {
+					lled |= 0 << i;
+				} else
+					if (hc->ledcount >> 11)
+						lled |= 0 << i;
+					else
+						lled |= 1 << i;
+			} else
+				lled |= 1 << i;
+		}
+		leddw = lled << 24 | lled << 16 | lled << 8 | lled;
+		if (leddw != hc->ledstate) {
+			/* HFC_outb(hc, R_BRG_PCM_CFG, 1);
+			HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); */
+			/* was _io before */
+			HFC_outb_nodebug(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
+			outw(0x4000, hc->pci_iobase + 4);
+			outl(leddw, hc->pci_iobase);
+			HFC_outb_nodebug(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+			hc->ledstate = leddw;
+		}
+		break;
+	}
+}
+/*
+ * read dtmf coefficients
+ */
+
+static void
+hfcmulti_dtmf(struct hfc_multi *hc)
+{
+	s32		*coeff;
+	u_int		mantissa;
+	int		co, ch;
+	struct bchannel	*bch = NULL;
+	u8		exponent;
+	int		dtmf = 0;
+	int		addr;
+	u16		w_float;
+	struct sk_buff	*skb;
+	struct mISDNhead *hh;
+
+	if (debug & DEBUG_HFCMULTI_DTMF)
+		printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__);
+	for (ch = 0; ch <= 31; ch++) {
+		/* only process enabled B-channels */
+		bch = hc->chan[ch].bch;
+		if (!bch)
+			continue;
+		if (!hc->created[hc->chan[ch].port])
+			continue;
+		if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+			continue;
+		if (debug & DEBUG_HFCMULTI_DTMF)
+			printk(KERN_DEBUG "%s: dtmf channel %d:",
+				__func__, ch);
+		coeff = &(hc->chan[ch].coeff[hc->chan[ch].coeff_count * 16]);
+		dtmf = 1;
+		for (co = 0; co < 8; co++) {
+			/* read W(n-1) coefficient */
+			addr = hc->DTMFbase + ((co<<7) | (ch<<2));
+			HFC_outb_nodebug(hc, R_RAM_ADDR0, addr);
+			HFC_outb_nodebug(hc, R_RAM_ADDR1, addr>>8);
+			HFC_outb_nodebug(hc, R_RAM_ADDR2, (addr>>16)
+				| V_ADDR_INC);
+			w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
+			w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
+			if (debug & DEBUG_HFCMULTI_DTMF)
+				printk(" %04x", w_float);
+
+			/* decode float (see chip doc) */
+			mantissa = w_float & 0x0fff;
+			if (w_float & 0x8000)
+				mantissa |= 0xfffff000;
+			exponent = (w_float>>12) & 0x7;
+			if (exponent) {
+				mantissa ^= 0x1000;
+				mantissa <<= (exponent-1);
+			}
+
+			/* store coefficient */
+			coeff[co<<1] = mantissa;
+
+			/* read W(n) coefficient */
+			w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
+			w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
+			if (debug & DEBUG_HFCMULTI_DTMF)
+				printk(" %04x", w_float);
+
+			/* decode float (see chip doc) */
+			mantissa = w_float & 0x0fff;
+			if (w_float & 0x8000)
+				mantissa |= 0xfffff000;
+			exponent = (w_float>>12) & 0x7;
+			if (exponent) {
+				mantissa ^= 0x1000;
+				mantissa <<= (exponent-1);
+			}
+
+			/* store coefficient */
+			coeff[(co<<1)|1] = mantissa;
+		}
+		if (debug & DEBUG_HFCMULTI_DTMF)
+			printk("%s: DTMF ready %08x %08x %08x %08x "
+			    "%08x %08x %08x %08x\n", __func__,
+			    coeff[0], coeff[1], coeff[2], coeff[3],
+			    coeff[4], coeff[5], coeff[6], coeff[7]);
+		hc->chan[ch].coeff_count++;
+		if (hc->chan[ch].coeff_count == 8) {
+			hc->chan[ch].coeff_count = 0;
+			skb = mI_alloc_skb(512, GFP_ATOMIC);
+			if (!skb) {
+				printk(KERN_WARNING "%s: No memory for skb\n",
+				    __func__);
+				continue;
+			}
+			hh = mISDN_HEAD_P(skb);
+			hh->prim = PH_CONTROL_IND;
+			hh->id = DTMF_HFC_COEF;
+			memcpy(skb_put(skb, 512), hc->chan[ch].coeff, 512);
+			recv_Bchannel_skb(bch, skb);
+		}
+	}
+
+	/* restart DTMF processing */
+	hc->dtmf = dtmf;
+	if (dtmf)
+		HFC_outb_nodebug(hc, R_DTMF, hc->hw.r_dtmf | V_RST_DTMF);
+}
+
+
+/*
+ * fill fifo as much as possible
+ */
+
+static void
+hfcmulti_tx(struct hfc_multi *hc, int ch)
+{
+	int i, ii, temp, len = 0;
+	int Zspace, z1, z2; /* must be int for calculation */
+	int Fspace, f1, f2;
+	u_char *d;
+	int *txpending, slot_tx;
+	struct	bchannel *bch;
+	struct  dchannel *dch;
+	struct  sk_buff **sp = NULL;
+	int *idxp;
+
+	bch = hc->chan[ch].bch;
+	dch = hc->chan[ch].dch;
+	if ((!dch) && (!bch))
+		return;
+
+	txpending = &hc->chan[ch].txpending;
+	slot_tx = hc->chan[ch].slot_tx;
+	if (dch) {
+		if (!test_bit(FLG_ACTIVE, &dch->Flags))
+			return;
+		sp = &dch->tx_skb;
+		idxp = &dch->tx_idx;
+	} else {
+		if (!test_bit(FLG_ACTIVE, &bch->Flags))
+			return;
+		sp = &bch->tx_skb;
+		idxp = &bch->tx_idx;
+	}
+	if (*sp)
+		len = (*sp)->len;
+
+	if ((!len) && *txpending != 1)
+		return; /* no data */
+
+	if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+	    (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
+	    (hc->chan[ch].slot_rx < 0) &&
+	    (hc->chan[ch].slot_tx < 0))
+		HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch << 1));
+	else
+		HFC_outb_nodebug(hc, R_FIFO, ch << 1);
+	HFC_wait_nodebug(hc);
+
+	if (*txpending == 2) {
+		/* reset fifo */
+		HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait_nodebug(hc);
+		HFC_outb(hc, A_SUBCH_CFG, 0);
+		*txpending = 1;
+	}
+next_frame:
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		f1 = HFC_inb_nodebug(hc, A_F1);
+		f2 = HFC_inb_nodebug(hc, A_F2);
+		while (f2 != (temp = HFC_inb_nodebug(hc, A_F2))) {
+			if (debug & DEBUG_HFCMULTI_FIFO)
+				printk(KERN_DEBUG
+				    "%s(card %d): reread f2 because %d!=%d\n",
+				    __func__, hc->id + 1, temp, f2);
+			f2 = temp; /* repeat until F2 is equal */
+		}
+		Fspace = f2 - f1 - 1;
+		if (Fspace < 0)
+			Fspace += hc->Flen;
+		/*
+		 * Old FIFO handling doesn't give us the current Z2 read
+		 * pointer, so we cannot send the next frame before the fifo
+		 * is empty. It makes no difference except for a slightly
+		 * lower performance.
+		 */
+		if (test_bit(HFC_CHIP_REVISION0, &hc->chip)) {
+			if (f1 != f2)
+				Fspace = 0;
+			else
+				Fspace = 1;
+		}
+		/* one frame only for ST D-channels, to allow resending */
+		if (hc->type != 1 && dch) {
+			if (f1 != f2)
+				Fspace = 0;
+		}
+		/* F-counter full condition */
+		if (Fspace == 0)
+			return;
+	}
+	z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
+	z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
+	while (z2 != (temp = (HFC_inw_nodebug(hc, A_Z2) - hc->Zmin))) {
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG "%s(card %d): reread z2 because "
+				"%d!=%d\n", __func__, hc->id + 1, temp, z2);
+		z2 = temp; /* repeat unti Z2 is equal */
+	}
+	Zspace = z2 - z1;
+	if (Zspace <= 0)
+		Zspace += hc->Zlen;
+	Zspace -= 4; /* keep not too full, so pointers will not overrun */
+	/* fill transparent data only to maxinum transparent load (minus 4) */
+	if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+		Zspace = Zspace - hc->Zlen + hc->max_trans;
+	if (Zspace <= 0) /* no space of 4 bytes */
+		return;
+
+	/* if no data */
+	if (!len) {
+		if (z1 == z2) { /* empty */
+			/* if done with FIFO audio data during PCM connection */
+			if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) &&
+			    *txpending && slot_tx >= 0) {
+				if (debug & DEBUG_HFCMULTI_MODE)
+					printk(KERN_DEBUG
+					    "%s: reconnecting PCM due to no "
+					    "more FIFO data: channel %d "
+					    "slot_tx %d\n",
+					    __func__, ch, slot_tx);
+				/* connect slot */
+				HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+				    V_HDLC_TRP | V_IFF);
+				HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
+				HFC_wait_nodebug(hc);
+				HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+				    V_HDLC_TRP | V_IFF);
+				HFC_outb_nodebug(hc, R_FIFO, ch<<1);
+				HFC_wait_nodebug(hc);
+			}
+			*txpending = 0;
+		}
+		return; /* no data */
+	}
+
+	/* if audio data and connected slot */
+	if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending)
+		&& slot_tx >= 0) {
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: disconnecting PCM due to "
+			    "FIFO data: channel %d slot_tx %d\n",
+			    __func__, ch, slot_tx);
+		/* disconnect slot */
+		HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+		HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
+		HFC_wait_nodebug(hc);
+		HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+		HFC_outb_nodebug(hc, R_FIFO, ch<<1);
+		HFC_wait_nodebug(hc);
+	}
+	*txpending = 1;
+
+	/* show activity */
+	hc->activity[hc->chan[ch].port] = 1;
+
+	/* fill fifo to what we have left */
+	ii = len;
+	if (dch || test_bit(FLG_HDLC, &bch->Flags))
+		temp = 1;
+	else
+		temp = 0;
+	i = *idxp;
+	d = (*sp)->data + i;
+	if (ii - i > Zspace)
+		ii = Zspace + i;
+	if (debug & DEBUG_HFCMULTI_FIFO)
+		printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
+		    "left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n",
+			__func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
+			temp ? "HDLC":"TRANS");
+
+
+	/* Have to prep the audio data */
+	hc->write_fifo(hc, d, ii - i);
+	*idxp = ii;
+
+	/* if not all data has been written */
+	if (ii != len) {
+		/* NOTE: fifo is started by the calling function */
+		return;
+	}
+
+	/* if all data has been written, terminate frame */
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		/* increment f-counter */
+		HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
+		HFC_wait_nodebug(hc);
+	}
+
+	/* send confirm, since get_net_bframe will not do it with trans */
+	if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+		confirm_Bsend(bch);
+
+	/* check for next frame */
+	dev_kfree_skb(*sp);
+	if (bch && get_next_bframe(bch)) { /* hdlc is confirmed here */
+		len = (*sp)->len;
+		goto next_frame;
+	}
+	if (dch && get_next_dframe(dch)) {
+		len = (*sp)->len;
+		goto next_frame;
+	}
+
+	/*
+	 * now we have no more data, so in case of transparent,
+	 * we set the last byte in fifo to 'silence' in case we will get
+	 * no more data at all. this prevents sending an undefined value.
+	 */
+	if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+		HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+}
+
+
+/* NOTE: only called if E1 card is in active state */
+static void
+hfcmulti_rx(struct hfc_multi *hc, int ch)
+{
+	int temp;
+	int Zsize, z1, z2 = 0; /* = 0, to make GCC happy */
+	int f1 = 0, f2 = 0; /* = 0, to make GCC happy */
+	int again = 0;
+	struct	bchannel *bch;
+	struct  dchannel *dch;
+	struct sk_buff	*skb, **sp = NULL;
+	int	maxlen;
+
+	bch = hc->chan[ch].bch;
+	dch = hc->chan[ch].dch;
+	if ((!dch) && (!bch))
+		return;
+	if (dch) {
+		if (!test_bit(FLG_ACTIVE, &dch->Flags))
+			return;
+		sp = &dch->rx_skb;
+		maxlen = dch->maxlen;
+	} else {
+		if (!test_bit(FLG_ACTIVE, &bch->Flags))
+			return;
+		sp = &bch->rx_skb;
+		maxlen = bch->maxlen;
+	}
+next_frame:
+	/* on first AND before getting next valid frame, R_FIFO must be written
+	   to. */
+	if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+	    (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
+	    (hc->chan[ch].slot_rx < 0) &&
+	    (hc->chan[ch].slot_tx < 0))
+		HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch<<1) | 1);
+	else
+		HFC_outb_nodebug(hc, R_FIFO, (ch<<1)|1);
+	HFC_wait_nodebug(hc);
+
+	/* ignore if rx is off BUT change fifo (above) to start pending TX */
+	if (hc->chan[ch].rx_off)
+		return;
+
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		f1 = HFC_inb_nodebug(hc, A_F1);
+		while (f1 != (temp = HFC_inb_nodebug(hc, A_F1))) {
+			if (debug & DEBUG_HFCMULTI_FIFO)
+				printk(KERN_DEBUG
+				    "%s(card %d): reread f1 because %d!=%d\n",
+				    __func__, hc->id + 1, temp, f1);
+			f1 = temp; /* repeat until F1 is equal */
+		}
+		f2 = HFC_inb_nodebug(hc, A_F2);
+	}
+	z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
+	while (z1 != (temp = (HFC_inw_nodebug(hc, A_Z1) - hc->Zmin))) {
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG "%s(card %d): reread z2 because "
+				"%d!=%d\n", __func__, hc->id + 1, temp, z2);
+		z1 = temp; /* repeat until Z1 is equal */
+	}
+	z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
+	Zsize = z1 - z2;
+	if ((dch || test_bit(FLG_HDLC, &bch->Flags)) && f1 != f2)
+		/* complete hdlc frame */
+		Zsize++;
+	if (Zsize < 0)
+		Zsize += hc->Zlen;
+	/* if buffer is empty */
+	if (Zsize <= 0)
+		return;
+
+	if (*sp == NULL) {
+		*sp = mI_alloc_skb(maxlen + 3, GFP_ATOMIC);
+		if (*sp == NULL) {
+			printk(KERN_DEBUG "%s: No mem for rx_skb\n",
+			    __func__);
+			return;
+		}
+	}
+	/* show activity */
+	hc->activity[hc->chan[ch].port] = 1;
+
+	/* empty fifo with what we have */
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d "
+			    "bytes (z1=%04x, z2=%04x) HDLC %s (f1=%d, f2=%d) "
+			    "got=%d (again %d)\n", __func__, hc->id + 1, ch,
+			    Zsize, z1, z2, (f1 == f2) ? "fragment" : "COMPLETE",
+			    f1, f2, Zsize + (*sp)->len, again);
+		/* HDLC */
+		if ((Zsize + (*sp)->len) > (maxlen + 3)) {
+			if (debug & DEBUG_HFCMULTI_FIFO)
+				printk(KERN_DEBUG
+				    "%s(card %d): hdlc-frame too large.\n",
+				    __func__, hc->id + 1);
+			skb_trim(*sp, 0);
+			HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait_nodebug(hc);
+			return;
+		}
+
+		hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
+
+		if (f1 != f2) {
+			/* increment Z2,F2-counter */
+			HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
+			HFC_wait_nodebug(hc);
+			/* check size */
+			if ((*sp)->len < 4) {
+				if (debug & DEBUG_HFCMULTI_FIFO)
+					printk(KERN_DEBUG
+					    "%s(card %d): Frame below minimum "
+					    "size\n", __func__, hc->id + 1);
+				skb_trim(*sp, 0);
+				goto next_frame;
+			}
+			/* there is at least one complete frame, check crc */
+			if ((*sp)->data[(*sp)->len - 1]) {
+				if (debug & DEBUG_HFCMULTI_CRC)
+					printk(KERN_DEBUG
+					    "%s: CRC-error\n", __func__);
+				skb_trim(*sp, 0);
+				goto next_frame;
+			}
+			skb_trim(*sp, (*sp)->len - 3);
+			if ((*sp)->len < MISDN_COPY_SIZE) {
+				skb = *sp;
+				*sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
+				if (*sp) {
+					memcpy(skb_put(*sp, skb->len),
+					    skb->data, skb->len);
+					skb_trim(skb, 0);
+				} else {
+					printk(KERN_DEBUG "%s: No mem\n",
+					    __func__);
+					*sp = skb;
+					skb = NULL;
+				}
+			} else {
+				skb = NULL;
+			}
+			if (debug & DEBUG_HFCMULTI_FIFO) {
+				printk(KERN_DEBUG "%s(card %d):",
+					__func__, hc->id + 1);
+				temp = 0;
+				while (temp < (*sp)->len)
+					printk(" %02x", (*sp)->data[temp++]);
+				printk("\n");
+			}
+			if (dch)
+				recv_Dchannel(dch);
+			else
+				recv_Bchannel(bch);
+			*sp = skb;
+			again++;
+			goto next_frame;
+		}
+		/* there is an incomplete frame */
+	} else {
+		/* transparent */
+		if (Zsize > skb_tailroom(*sp))
+			Zsize = skb_tailroom(*sp);
+		hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
+		if (((*sp)->len) < MISDN_COPY_SIZE) {
+			skb = *sp;
+			*sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
+			if (*sp) {
+				memcpy(skb_put(*sp, skb->len),
+				    skb->data, skb->len);
+				skb_trim(skb, 0);
+			} else {
+				printk(KERN_DEBUG "%s: No mem\n", __func__);
+				*sp = skb;
+				skb = NULL;
+			}
+		} else {
+			skb = NULL;
+		}
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG
+			    "%s(card %d): fifo(%d) reading %d bytes "
+			    "(z1=%04x, z2=%04x) TRANS\n",
+				__func__, hc->id + 1, ch, Zsize, z1, z2);
+		/* only bch is transparent */
+		recv_Bchannel(bch);
+		*sp = skb;
+	}
+}
+
+
+/*
+ * Interrupt handler
+ */
+static void
+signal_state_up(struct dchannel *dch, int info, char *msg)
+{
+	struct sk_buff	*skb;
+	int		id, data = info;
+
+	if (debug & DEBUG_HFCMULTI_STATE)
+		printk(KERN_DEBUG "%s: %s\n", __func__, msg);
+
+	id = TEI_SAPI | (GROUP_TEI << 8); /* manager address */
+
+	skb = _alloc_mISDN_skb(MPH_INFORMATION_IND, id, sizeof(data), &data,
+		GFP_ATOMIC);
+	if (!skb)
+		return;
+	recv_Dchannel_skb(dch, skb);
+}
+
+static inline void
+handle_timer_irq(struct hfc_multi *hc)
+{
+	int		ch, temp;
+	struct dchannel	*dch;
+	u_long		flags;
+
+	/* process queued resync jobs */
+	if (hc->e1_resync) {
+		/* lock, so e1_resync gets not changed */
+		spin_lock_irqsave(&HFClock, flags);
+		if (hc->e1_resync & 1) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "Enable SYNC_I\n");
+			HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC);
+			/* disable JATT, if RX_SYNC is set */
+			if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
+				HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
+		}
+		if (hc->e1_resync & 2) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "Enable jatt PLL\n");
+			HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
+		}
+		if (hc->e1_resync & 4) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG
+				    "Enable QUARTZ for HFC-E1\n");
+			/* set jatt to quartz */
+			HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC
+				| V_JATT_OFF);
+			/* switch to JATT, in case it is not already */
+			HFC_outb(hc, R_SYNC_OUT, 0);
+		}
+		hc->e1_resync = 0;
+		spin_unlock_irqrestore(&HFClock, flags);
+	}
+
+	if (hc->type != 1 || hc->e1_state == 1)
+		for (ch = 0; ch <= 31; ch++) {
+			if (hc->created[hc->chan[ch].port]) {
+				hfcmulti_tx(hc, ch);
+				/* fifo is started when switching to rx-fifo */
+				hfcmulti_rx(hc, ch);
+				if (hc->chan[ch].dch &&
+				    hc->chan[ch].nt_timer > -1) {
+					dch = hc->chan[ch].dch;
+					if (!(--hc->chan[ch].nt_timer)) {
+						schedule_event(dch,
+						    FLG_PHCHANGE);
+						if (debug &
+						    DEBUG_HFCMULTI_STATE)
+							printk(KERN_DEBUG
+							    "%s: nt_timer at "
+							    "state %x\n",
+							    __func__,
+							    dch->state);
+					}
+				}
+			}
+		}
+	if (hc->type == 1 && hc->created[0]) {
+		dch = hc->chan[hc->dslot].dch;
+		if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
+			/* LOS */
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS;
+			if (!temp && hc->chan[hc->dslot].los)
+				signal_state_up(dch, L1_SIGNAL_LOS_ON,
+				    "LOS detected");
+			if (temp && !hc->chan[hc->dslot].los)
+				signal_state_up(dch, L1_SIGNAL_LOS_OFF,
+				    "LOS gone");
+			hc->chan[hc->dslot].los = temp;
+		}
+		if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dslot].cfg)) {
+			/* AIS */
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_AIS;
+			if (!temp && hc->chan[hc->dslot].ais)
+				signal_state_up(dch, L1_SIGNAL_AIS_ON,
+				    "AIS detected");
+			if (temp && !hc->chan[hc->dslot].ais)
+				signal_state_up(dch, L1_SIGNAL_AIS_OFF,
+				    "AIS gone");
+			hc->chan[hc->dslot].ais = temp;
+		}
+		if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dslot].cfg)) {
+			/* SLIP */
+			temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_RX;
+			if (!temp && hc->chan[hc->dslot].slip_rx)
+				signal_state_up(dch, L1_SIGNAL_SLIP_RX,
+				    " bit SLIP detected RX");
+			hc->chan[hc->dslot].slip_rx = temp;
+			temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_TX;
+			if (!temp && hc->chan[hc->dslot].slip_tx)
+				signal_state_up(dch, L1_SIGNAL_SLIP_TX,
+				    " bit SLIP detected TX");
+			hc->chan[hc->dslot].slip_tx = temp;
+		}
+		if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dslot].cfg)) {
+			/* RDI */
+			temp = HFC_inb_nodebug(hc, R_RX_SL0_0) & V_A;
+			if (!temp && hc->chan[hc->dslot].rdi)
+				signal_state_up(dch, L1_SIGNAL_RDI_ON,
+				    "RDI detected");
+			if (temp && !hc->chan[hc->dslot].rdi)
+				signal_state_up(dch, L1_SIGNAL_RDI_OFF,
+				    "RDI gone");
+			hc->chan[hc->dslot].rdi = temp;
+		}
+		temp = HFC_inb_nodebug(hc, R_JATT_DIR);
+		switch (hc->chan[hc->dslot].sync) {
+		case 0:
+			if ((temp & 0x60) == 0x60) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 now "
+					    "in clock sync\n",
+					    __func__, hc->id);
+				HFC_outb(hc, R_RX_OFF,
+				    hc->chan[hc->dslot].jitter | V_RX_INIT);
+				HFC_outb(hc, R_TX_OFF,
+				    hc->chan[hc->dslot].jitter | V_RX_INIT);
+				hc->chan[hc->dslot].sync = 1;
+				goto check_framesync;
+			}
+			break;
+		case 1:
+			if ((temp & 0x60) != 0x60) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 "
+					    "lost clock sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 0;
+				break;
+			}
+check_framesync:
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA);
+			if (temp == 0x27) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 "
+					    "now in frame sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 2;
+			}
+			break;
+		case 2:
+			if ((temp & 0x60) != 0x60) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 lost "
+					    "clock & frame sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 0;
+				break;
+			}
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA);
+			if (temp != 0x27) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 "
+					    "lost frame sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 1;
+			}
+			break;
+		}
+	}
+
+	if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
+		hfcmulti_watchdog(hc);
+
+	if (hc->leds)
+		hfcmulti_leds(hc);
+}
+
+static void
+ph_state_irq(struct hfc_multi *hc, u_char r_irq_statech)
+{
+	struct dchannel	*dch;
+	int		ch;
+	int		active;
+	u_char		st_status, temp;
+
+	/* state machine */
+	for (ch = 0; ch <= 31; ch++) {
+		if (hc->chan[ch].dch) {
+			dch = hc->chan[ch].dch;
+			if (r_irq_statech & 1) {
+				HFC_outb_nodebug(hc, R_ST_SEL,
+					hc->chan[ch].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				/* undocumented: status changes during read */
+				st_status = HFC_inb_nodebug(hc, A_ST_RD_STATE);
+				while (st_status != (temp =
+					HFC_inb_nodebug(hc, A_ST_RD_STATE))) {
+					if (debug & DEBUG_HFCMULTI_STATE)
+						printk(KERN_DEBUG "%s: reread "
+						    "STATE because %d!=%d\n",
+						    __func__, temp,
+						    st_status);
+					st_status = temp; /* repeat */
+				}
+
+				/* Speech Design TE-sync indication */
+				if (test_bit(HFC_CHIP_PLXSD, &hc->chip) &&
+					dch->dev.D.protocol == ISDN_P_TE_S0) {
+					if (st_status & V_FR_SYNC_ST)
+						hc->syncronized |=
+						    (1 << hc->chan[ch].port);
+					else
+						hc->syncronized &=
+						   ~(1 << hc->chan[ch].port);
+				}
+				dch->state = st_status & 0x0f;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+				if (dch->state == active) {
+					HFC_outb_nodebug(hc, R_FIFO,
+						(ch << 1) | 1);
+					HFC_wait_nodebug(hc);
+					HFC_outb_nodebug(hc,
+						R_INC_RES_FIFO, V_RES_F);
+					HFC_wait_nodebug(hc);
+					dch->tx_idx = 0;
+				}
+				schedule_event(dch, FLG_PHCHANGE);
+				if (debug & DEBUG_HFCMULTI_STATE)
+					printk(KERN_DEBUG
+					    "%s: S/T newstate %x port %d\n",
+					    __func__, dch->state,
+					    hc->chan[ch].port);
+			}
+			r_irq_statech >>= 1;
+		}
+	}
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+		plxsd_checksync(hc, 0);
+}
+
+static void
+fifo_irq(struct hfc_multi *hc, int block)
+{
+	int	ch, j;
+	struct dchannel	*dch;
+	struct bchannel	*bch;
+	u_char r_irq_fifo_bl;
+
+	r_irq_fifo_bl = HFC_inb_nodebug(hc, R_IRQ_FIFO_BL0 + block);
+	j = 0;
+	while (j < 8) {
+		ch = (block << 2) + (j >> 1);
+		dch = hc->chan[ch].dch;
+		bch = hc->chan[ch].bch;
+		if (((!dch) && (!bch)) || (!hc->created[hc->chan[ch].port])) {
+			j += 2;
+			continue;
+		}
+		if (dch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &dch->Flags)) {
+			hfcmulti_tx(hc, ch);
+			/* start fifo */
+			HFC_outb_nodebug(hc, R_FIFO, 0);
+			HFC_wait_nodebug(hc);
+		}
+		if (bch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &bch->Flags)) {
+			hfcmulti_tx(hc, ch);
+			/* start fifo */
+			HFC_outb_nodebug(hc, R_FIFO, 0);
+			HFC_wait_nodebug(hc);
+		}
+		j++;
+		if (dch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &dch->Flags)) {
+			hfcmulti_rx(hc, ch);
+		}
+		if (bch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &bch->Flags)) {
+			hfcmulti_rx(hc, ch);
+		}
+		j++;
+	}
+}
+
+#ifdef IRQ_DEBUG
+int irqsem;
+#endif
+static irqreturn_t
+hfcmulti_interrupt(int intno, void *dev_id)
+{
+#ifdef IRQCOUNT_DEBUG
+	static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0,
+	    iq5 = 0, iq6 = 0, iqcnt = 0;
+#endif
+	static int		count;
+	struct hfc_multi	*hc = dev_id;
+	struct dchannel		*dch;
+	u_char			r_irq_statech, status, r_irq_misc, r_irq_oview;
+	int			i;
+	u_short			*plx_acc, wval;
+	u_char			e1_syncsta, temp;
+	u_long			flags;
+
+	if (!hc) {
+		printk(KERN_ERR "HFC-multi: Spurious interrupt!\n");
+		return IRQ_NONE;
+	}
+
+	spin_lock(&hc->lock);
+
+#ifdef IRQ_DEBUG
+	if (irqsem)
+		printk(KERN_ERR "irq for card %d during irq from "
+		"card %d, this is no bug.\n", hc->id + 1, irqsem);
+	irqsem = hc->id + 1;
+#endif
+
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, flags);
+		plx_acc = (u_short *)(hc->plx_membase + PLX_INTCSR);
+		wval = readw(plx_acc);
+		spin_unlock_irqrestore(&plx_lock, flags);
+		if (!(wval & PLX_INTCSR_LINTI1_STATUS))
+			goto irq_notforus;
+	}
+
+	status = HFC_inb_nodebug(hc, R_STATUS);
+	r_irq_statech = HFC_inb_nodebug(hc, R_IRQ_STATECH);
+#ifdef IRQCOUNT_DEBUG
+	if (r_irq_statech)
+		iq1++;
+	if (status & V_DTMF_STA)
+		iq2++;
+	if (status & V_LOST_STA)
+		iq3++;
+	if (status & V_EXT_IRQSTA)
+		iq4++;
+	if (status & V_MISC_IRQSTA)
+		iq5++;
+	if (status & V_FR_IRQSTA)
+		iq6++;
+	if (iqcnt++ > 5000) {
+		printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n",
+		    iq1, iq2, iq3, iq4, iq5, iq6);
+		iqcnt = 0;
+	}
+#endif
+	if (!r_irq_statech &&
+	    !(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA |
+	    V_MISC_IRQSTA | V_FR_IRQSTA))) {
+		/* irq is not for us */
+		goto irq_notforus;
+	}
+	hc->irqcnt++;
+	if (r_irq_statech) {
+		if (hc->type != 1)
+			ph_state_irq(hc, r_irq_statech);
+	}
+	if (status & V_EXT_IRQSTA)
+		; /* external IRQ */
+	if (status & V_LOST_STA) {
+		/* LOST IRQ */
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_LOST); /* clear irq! */
+	}
+	if (status & V_MISC_IRQSTA) {
+		/* misc IRQ */
+		r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
+		if (r_irq_misc & V_STA_IRQ) {
+			if (hc->type == 1) {
+				/* state machine */
+				dch = hc->chan[hc->dslot].dch;
+				e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA);
+				if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
+				 && hc->e1_getclock) {
+					if (e1_syncsta & V_FR_SYNC_E1)
+						hc->syncronized = 1;
+					else
+						hc->syncronized = 0;
+				}
+				/* undocumented: status changes during read */
+				dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA);
+				while (dch->state != (temp =
+					HFC_inb_nodebug(hc, R_E1_RD_STA))) {
+					if (debug & DEBUG_HFCMULTI_STATE)
+						printk(KERN_DEBUG "%s: reread "
+						    "STATE because %d!=%d\n",
+						    __func__, temp,
+						    dch->state);
+					dch->state = temp; /* repeat */
+				}
+				dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA)
+					& 0x7;
+				schedule_event(dch, FLG_PHCHANGE);
+				if (debug & DEBUG_HFCMULTI_STATE)
+					printk(KERN_DEBUG
+					    "%s: E1 (id=%d) newstate %x\n",
+					    __func__, hc->id, dch->state);
+				if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+					plxsd_checksync(hc, 0);
+			}
+		}
+		if (r_irq_misc & V_TI_IRQ)
+			handle_timer_irq(hc);
+
+		if (r_irq_misc & V_DTMF_IRQ) {
+			/* -> DTMF IRQ */
+			hfcmulti_dtmf(hc);
+		}
+		/* TODO: REPLACE !!!! 125 us Interrupts are not acceptable  */
+		if (r_irq_misc & V_IRQ_PROC) {
+			/* IRQ every 125us */
+			count++;
+			/* generate 1kHz signal */
+			if (count == 8) {
+				if (hfc_interrupt)
+					hfc_interrupt();
+				count = 0;
+			}
+		}
+
+	}
+	if (status & V_FR_IRQSTA) {
+		/* FIFO IRQ */
+		r_irq_oview = HFC_inb_nodebug(hc, R_IRQ_OVIEW);
+		for (i = 0; i < 8; i++) {
+			if (r_irq_oview & (1 << i))
+				fifo_irq(hc, i);
+		}
+	}
+
+#ifdef IRQ_DEBUG
+	irqsem = 0;
+#endif
+	spin_unlock(&hc->lock);
+	return IRQ_HANDLED;
+
+irq_notforus:
+#ifdef IRQ_DEBUG
+	irqsem = 0;
+#endif
+	spin_unlock(&hc->lock);
+	return IRQ_NONE;
+}
+
+
+/*
+ * timer callback for D-chan busy resolution. Currently no function
+ */
+
+static void
+hfcmulti_dbusy_timer(struct hfc_multi *hc)
+{
+}
+
+
+/*
+ * activate/deactivate hardware for selected channels and mode
+ *
+ * configure B-channel with the given protocol
+ * ch eqals to the HFC-channel (0-31)
+ * ch is the number of channel (0-4,4-7,8-11,12-15,16-19,20-23,24-27,28-31
+ * for S/T, 1-31 for E1)
+ * the hdlc interrupts will be set/unset
+ */
+static int
+mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
+    int bank_tx, int slot_rx, int bank_rx)
+{
+	int flow_tx = 0, flow_rx = 0, routing = 0;
+	int oslot_tx, oslot_rx;
+	int conf;
+
+	if (ch < 0 || ch > 31)
+		return EINVAL;
+	oslot_tx = hc->chan[ch].slot_tx;
+	oslot_rx = hc->chan[ch].slot_rx;
+	conf = hc->chan[ch].conf;
+
+	if (debug & DEBUG_HFCMULTI_MODE)
+		printk(KERN_DEBUG
+		    "%s: card %d channel %d protocol %x slot old=%d new=%d "
+		    "bank new=%d (TX) slot old=%d new=%d bank new=%d (RX)\n",
+		    __func__, hc->id, ch, protocol, oslot_tx, slot_tx,
+		    bank_tx, oslot_rx, slot_rx, bank_rx);
+
+	if (oslot_tx >= 0 && slot_tx != oslot_tx) {
+		/* remove from slot */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: remove from slot %d (TX)\n",
+			    __func__, oslot_tx);
+		if (hc->slot_owner[oslot_tx<<1] == ch) {
+			HFC_outb(hc, R_SLOT, oslot_tx << 1);
+			HFC_outb(hc, A_SL_CFG, 0);
+			HFC_outb(hc, A_CONF, 0);
+			hc->slot_owner[oslot_tx<<1] = -1;
+		} else {
+			if (debug & DEBUG_HFCMULTI_MODE)
+				printk(KERN_DEBUG
+				    "%s: we are not owner of this tx slot "
+				    "anymore, channel %d is.\n",
+				    __func__, hc->slot_owner[oslot_tx<<1]);
+		}
+	}
+
+	if (oslot_rx >= 0 && slot_rx != oslot_rx) {
+		/* remove from slot */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG
+			    "%s: remove from slot %d (RX)\n",
+			    __func__, oslot_rx);
+		if (hc->slot_owner[(oslot_rx << 1) | 1] == ch) {
+			HFC_outb(hc, R_SLOT, (oslot_rx << 1) | V_SL_DIR);
+			HFC_outb(hc, A_SL_CFG, 0);
+			hc->slot_owner[(oslot_rx << 1) | 1] = -1;
+		} else {
+			if (debug & DEBUG_HFCMULTI_MODE)
+				printk(KERN_DEBUG
+				    "%s: we are not owner of this rx slot "
+				    "anymore, channel %d is.\n",
+				    __func__,
+				    hc->slot_owner[(oslot_rx << 1) | 1]);
+		}
+	}
+
+	if (slot_tx < 0) {
+		flow_tx = 0x80; /* FIFO->ST */
+		/* disable pcm slot */
+		hc->chan[ch].slot_tx = -1;
+		hc->chan[ch].bank_tx = 0;
+	} else {
+		/* set pcm slot */
+		if (hc->chan[ch].txpending)
+			flow_tx = 0x80; /* FIFO->ST */
+		else
+			flow_tx = 0xc0; /* PCM->ST */
+		/* put on slot */
+		routing = bank_tx ? 0xc0 : 0x80;
+		if (conf >= 0 || bank_tx > 1)
+			routing = 0x40; /* loop */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
+			    " %d flow %02x routing %02x conf %d (TX)\n",
+			    __func__, ch, slot_tx, bank_tx,
+			    flow_tx, routing, conf);
+		HFC_outb(hc, R_SLOT, slot_tx << 1);
+		HFC_outb(hc, A_SL_CFG, (ch<<1) | routing);
+		HFC_outb(hc, A_CONF, (conf < 0) ? 0 : (conf | V_CONF_SL));
+		hc->slot_owner[slot_tx << 1] = ch;
+		hc->chan[ch].slot_tx = slot_tx;
+		hc->chan[ch].bank_tx = bank_tx;
+	}
+	if (slot_rx < 0) {
+		/* disable pcm slot */
+		flow_rx = 0x80; /* ST->FIFO */
+		hc->chan[ch].slot_rx = -1;
+		hc->chan[ch].bank_rx = 0;
+	} else {
+		/* set pcm slot */
+		if (hc->chan[ch].txpending)
+			flow_rx = 0x80; /* ST->FIFO */
+		else
+			flow_rx = 0xc0; /* ST->(FIFO,PCM) */
+		/* put on slot */
+		routing = bank_rx?0x80:0xc0; /* reversed */
+		if (conf >= 0 || bank_rx > 1)
+			routing = 0x40; /* loop */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
+			    " %d flow %02x routing %02x conf %d (RX)\n",
+			    __func__, ch, slot_rx, bank_rx,
+			    flow_rx, routing, conf);
+		HFC_outb(hc, R_SLOT, (slot_rx<<1) | V_SL_DIR);
+		HFC_outb(hc, A_SL_CFG, (ch<<1) | V_CH_DIR | routing);
+		hc->slot_owner[(slot_rx<<1)|1] = ch;
+		hc->chan[ch].slot_rx = slot_rx;
+		hc->chan[ch].bank_rx = bank_rx;
+	}
+
+	switch (protocol) {
+	case (ISDN_P_NONE):
+		/* disable TX fifo */
+		HFC_outb(hc, R_FIFO, ch << 1);
+		HFC_wait(hc);
+		HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | V_IFF);
+		HFC_outb(hc, A_SUBCH_CFG, 0);
+		HFC_outb(hc, A_IRQ_MSK, 0);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		/* disable RX fifo */
+		HFC_outb(hc, R_FIFO, (ch<<1)|1);
+		HFC_wait(hc);
+		HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00);
+		HFC_outb(hc, A_SUBCH_CFG, 0);
+		HFC_outb(hc, A_IRQ_MSK, 0);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		if (hc->chan[ch].bch && hc->type != 1) {
+			hc->hw.a_st_ctrl0[hc->chan[ch].port] &=
+			    ((ch & 0x3) == 0)? ~V_B1_EN: ~V_B2_EN;
+			HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_CTRL0,
+			    hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+		}
+		if (hc->chan[ch].bch) {
+			test_and_clear_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
+			test_and_clear_bit(FLG_TRANSPARENT,
+			    &hc->chan[ch].bch->Flags);
+		}
+		break;
+	case (ISDN_P_B_RAW): /* B-channel */
+
+		if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+		    (hc->chan[ch].slot_rx < 0) &&
+		    (hc->chan[ch].slot_tx < 0)) {
+
+			printk(KERN_DEBUG
+			    "Setting B-channel %d to echo cancelable "
+			    "state on PCM slot %d\n", ch,
+			    ((ch / 4) * 8) + ((ch % 4) * 4) + 1);
+			printk(KERN_DEBUG
+			    "Enabling pass through for channel\n");
+			vpm_out(hc, ch, ((ch / 4) * 8) +
+			    ((ch % 4) * 4) + 1, 0x01);
+			/* rx path */
+			/* S/T -> PCM */
+			HFC_outb(hc, R_FIFO, (ch << 1));
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
+			    ((ch % 4) * 4) + 1) << 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | (ch << 1));
+
+			/* PCM -> FIFO */
+			HFC_outb(hc, R_FIFO, 0x20 | (ch << 1) | 1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+			HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
+			    ((ch % 4) * 4) + 1) << 1) | 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1) | 1);
+
+			/* tx path */
+			/* PCM -> S/T */
+			HFC_outb(hc, R_FIFO, (ch << 1) | 1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
+			    ((ch % 4) * 4)) << 1) | 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | 0x40 | (ch << 1) | 1);
+
+			/* FIFO -> PCM */
+			HFC_outb(hc, R_FIFO, 0x20 | (ch << 1));
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+			/* tx silence */
+			HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+			HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
+			    ((ch % 4) * 4)) << 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1));
+		} else {
+			/* enable TX fifo */
+			HFC_outb(hc, R_FIFO, ch << 1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
+			    V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+			/* tx silence */
+			HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+			/* enable RX fifo */
+			HFC_outb(hc, R_FIFO, (ch<<1)|1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | V_HDLC_TRP);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+		}
+		if (hc->type != 1) {
+			hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
+			    ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN;
+			HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_CTRL0,
+			    hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+		}
+		if (hc->chan[ch].bch)
+			test_and_set_bit(FLG_TRANSPARENT,
+			    &hc->chan[ch].bch->Flags);
+		break;
+	case (ISDN_P_B_HDLC): /* B-channel */
+	case (ISDN_P_TE_S0): /* D-channel */
+	case (ISDN_P_NT_S0):
+	case (ISDN_P_TE_E1):
+	case (ISDN_P_NT_E1):
+		/* enable TX fifo */
+		HFC_outb(hc, R_FIFO, ch<<1);
+		HFC_wait(hc);
+		if (hc->type == 1 || hc->chan[ch].bch) {
+			/* E1 or B-channel */
+			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+		} else {
+			/* D-Channel without HDLC fill flags */
+			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04 | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 2);
+		}
+		HFC_outb(hc, A_IRQ_MSK, V_IRQ);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		/* enable RX fifo */
+		HFC_outb(hc, R_FIFO, (ch<<1)|1);
+		HFC_wait(hc);
+		HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04);
+		if (hc->type == 1 || hc->chan[ch].bch)
+			HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */
+		else
+			HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */
+		HFC_outb(hc, A_IRQ_MSK, V_IRQ);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		if (hc->chan[ch].bch) {
+			test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
+			if (hc->type != 1) {
+				hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
+				  ((ch&0x3) == 0) ? V_B1_EN : V_B2_EN;
+				HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				HFC_outb(hc, A_ST_CTRL0,
+				  hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+			}
+		}
+		break;
+	default:
+		printk(KERN_DEBUG "%s: protocol not known %x\n",
+		    __func__, protocol);
+		hc->chan[ch].protocol = ISDN_P_NONE;
+		return -ENOPROTOOPT;
+	}
+	hc->chan[ch].protocol = protocol;
+	return 0;
+}
+
+
+/*
+ * connect/disconnect PCM
+ */
+
+static void
+hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx,
+    int slot_rx, int bank_rx)
+{
+	if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
+		/* disable PCM */
+		mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0);
+		return;
+	}
+
+	/* enable pcm */
+	mode_hfcmulti(hc, ch, hc->chan[ch].protocol, slot_tx, bank_tx,
+		slot_rx, bank_rx);
+}
+
+/*
+ * set/disable conference
+ */
+
+static void
+hfcmulti_conf(struct hfc_multi *hc, int ch, int num)
+{
+	if (num >= 0 && num <= 7)
+		hc->chan[ch].conf = num;
+	else
+		hc->chan[ch].conf = -1;
+	mode_hfcmulti(hc, ch, hc->chan[ch].protocol, hc->chan[ch].slot_tx,
+	    hc->chan[ch].bank_tx, hc->chan[ch].slot_rx,
+	    hc->chan[ch].bank_rx);
+}
+
+
+/*
+ * set/disable sample loop
+ */
+
+/* NOTE: this function is experimental and therefore disabled */
+
+/*
+ * Layer 1 callback function
+ */
+static int
+hfcm_l1callback(struct dchannel *dch, u_int cmd)
+{
+	struct hfc_multi	*hc = dch->hw;
+	u_long	flags;
+
+	switch (cmd) {
+	case INFO3_P8:
+	case INFO3_P10:
+		break;
+	case HW_RESET_REQ:
+		/* start activation */
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->type == 1) {
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: HW_RESET_REQ no BRI\n",
+				    __func__);
+		} else {
+			HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 3); /* F3 */
+			udelay(6); /* wait at least 5,21us */
+			HFC_outb(hc, A_ST_WR_STATE, 3);
+			HFC_outb(hc, A_ST_WR_STATE, 3 | (V_ST_ACT*3));
+				/* activate */
+		}
+		spin_unlock_irqrestore(&hc->lock, flags);
+		l1_event(dch->l1, HW_POWERUP_IND);
+		break;
+	case HW_DEACT_REQ:
+		/* start deactivation */
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->type == 1) {
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: HW_DEACT_REQ no BRI\n",
+				    __func__);
+		} else {
+			HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT*2);
+				/* deactivate */
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+				hc->syncronized &=
+				   ~(1 << hc->chan[dch->slot].port);
+				plxsd_checksync(hc, 0);
+			}
+		}
+		skb_queue_purge(&dch->squeue);
+		if (dch->tx_skb) {
+			dev_kfree_skb(dch->tx_skb);
+			dch->tx_skb = NULL;
+		}
+		dch->tx_idx = 0;
+		if (dch->rx_skb) {
+			dev_kfree_skb(dch->rx_skb);
+			dch->rx_skb = NULL;
+		}
+		test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+		if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+			del_timer(&dch->timer);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case HW_POWERUP_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->type == 1) {
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: HW_POWERUP_REQ no BRI\n",
+				    __func__);
+		} else {
+			HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_WR_STATE, 3 | 0x10); /* activate */
+			udelay(6); /* wait at least 5,21us */
+			HFC_outb(hc, A_ST_WR_STATE, 3); /* activate */
+		}
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case PH_ACTIVATE_IND:
+		test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	case PH_DEACTIVATE_IND:
+		test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * Layer2 -> Layer 1 Transfer
+ */
+
+static int
+handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct hfc_multi	*hc = dch->hw;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	int			ret = -EINVAL;
+	unsigned int		id;
+	u_long			flags;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		if (skb->len < 1)
+			break;
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = dchannel_senddata(dch, skb);
+		if (ret > 0) { /* direct TX */
+			id = hh->id; /* skb can be freed */
+			hfcmulti_tx(hc, dch->slot);
+			ret = 0;
+			/* start fifo */
+			HFC_outb(hc, R_FIFO, 0);
+			HFC_wait(hc);
+			spin_unlock_irqrestore(&hc->lock, flags);
+			queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+		} else
+			spin_unlock_irqrestore(&hc->lock, flags);
+		return ret;
+	case PH_ACTIVATE_REQ:
+		if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+			spin_lock_irqsave(&hc->lock, flags);
+			ret = 0;
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: PH_ACTIVATE port %d (0..%d)\n",
+				    __func__, hc->chan[dch->slot].port,
+				    hc->ports-1);
+			/* start activation */
+			if (hc->type == 1) {
+				ph_state_change(dch);
+				if (debug & DEBUG_HFCMULTI_STATE)
+					printk(KERN_DEBUG
+					    "%s: E1 report state %x \n",
+					    __func__, dch->state);
+			} else {
+				HFC_outb(hc, R_ST_SEL,
+				    hc->chan[dch->slot].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 1);
+				    /* G1 */
+				udelay(6); /* wait at least 5,21us */
+				HFC_outb(hc, A_ST_WR_STATE, 1);
+				HFC_outb(hc, A_ST_WR_STATE, 1 |
+				    (V_ST_ACT*3)); /* activate */
+				dch->state = 1;
+			}
+			spin_unlock_irqrestore(&hc->lock, flags);
+		} else
+			ret = l1_event(dch->l1, hh->prim);
+		break;
+	case PH_DEACTIVATE_REQ:
+		test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+		if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+			spin_lock_irqsave(&hc->lock, flags);
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: PH_DEACTIVATE port %d (0..%d)\n",
+				    __func__, hc->chan[dch->slot].port,
+				    hc->ports-1);
+			/* start deactivation */
+			if (hc->type == 1) {
+				if (debug & DEBUG_HFCMULTI_MSG)
+					printk(KERN_DEBUG
+					    "%s: PH_DEACTIVATE no BRI\n",
+					    __func__);
+			} else {
+				HFC_outb(hc, R_ST_SEL,
+				    hc->chan[dch->slot].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT * 2);
+				    /* deactivate */
+				dch->state = 1;
+			}
+			skb_queue_purge(&dch->squeue);
+			if (dch->tx_skb) {
+				dev_kfree_skb(dch->tx_skb);
+				dch->tx_skb = NULL;
+			}
+			dch->tx_idx = 0;
+			if (dch->rx_skb) {
+				dev_kfree_skb(dch->rx_skb);
+				dch->rx_skb = NULL;
+			}
+			test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+			if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+				del_timer(&dch->timer);
+#ifdef FIXME
+			if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
+				dchannel_sched_event(&hc->dch, D_CLEARBUSY);
+#endif
+			ret = 0;
+			spin_unlock_irqrestore(&hc->lock, flags);
+		} else
+			ret = l1_event(dch->l1, hh->prim);
+		break;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+static void
+deactivate_bchannel(struct bchannel *bch)
+{
+	struct hfc_multi	*hc = bch->hw;
+	u_long			flags;
+
+	spin_lock_irqsave(&hc->lock, flags);
+	if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
+		dev_kfree_skb(bch->next_skb);
+		bch->next_skb = NULL;
+	}
+	if (bch->tx_skb) {
+		dev_kfree_skb(bch->tx_skb);
+		bch->tx_skb = NULL;
+	}
+	bch->tx_idx = 0;
+	if (bch->rx_skb) {
+		dev_kfree_skb(bch->rx_skb);
+		bch->rx_skb = NULL;
+	}
+	hc->chan[bch->slot].coeff_count = 0;
+	test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+	test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
+	hc->chan[bch->slot].rx_off = 0;
+	hc->chan[bch->slot].conf = -1;
+	mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0);
+	spin_unlock_irqrestore(&hc->lock, flags);
+}
+
+static int
+handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct bchannel		*bch = container_of(ch, struct bchannel, ch);
+	struct hfc_multi	*hc = bch->hw;
+	int			ret = -EINVAL;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	unsigned int		id;
+	u_long			flags;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		if (!skb->len)
+			break;
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = bchannel_senddata(bch, skb);
+		if (ret > 0) { /* direct TX */
+			id = hh->id; /* skb can be freed */
+			hfcmulti_tx(hc, bch->slot);
+			ret = 0;
+			/* start fifo */
+			HFC_outb_nodebug(hc, R_FIFO, 0);
+			HFC_wait_nodebug(hc);
+			if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) {
+				spin_unlock_irqrestore(&hc->lock, flags);
+				queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+			} else
+				spin_unlock_irqrestore(&hc->lock, flags);
+		} else
+			spin_unlock_irqrestore(&hc->lock, flags);
+		return ret;
+	case PH_ACTIVATE_REQ:
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n",
+				__func__, bch->slot);
+		spin_lock_irqsave(&hc->lock, flags);
+		/* activate B-channel if not already activated */
+		if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) {
+			hc->chan[bch->slot].txpending = 0;
+			ret = mode_hfcmulti(hc, bch->slot,
+				ch->protocol,
+				hc->chan[bch->slot].slot_tx,
+				hc->chan[bch->slot].bank_tx,
+				hc->chan[bch->slot].slot_rx,
+				hc->chan[bch->slot].bank_rx);
+			if (!ret) {
+				if (ch->protocol == ISDN_P_B_RAW && !hc->dtmf
+					&& test_bit(HFC_CHIP_DTMF, &hc->chip)) {
+					/* start decoder */
+					hc->dtmf = 1;
+					if (debug & DEBUG_HFCMULTI_DTMF)
+						printk(KERN_DEBUG
+						    "%s: start dtmf decoder\n",
+							__func__);
+					HFC_outb(hc, R_DTMF, hc->hw.r_dtmf |
+					    V_RST_DTMF);
+				}
+			}
+		} else
+			ret = 0;
+		spin_unlock_irqrestore(&hc->lock, flags);
+		if (!ret)
+			_queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
+				GFP_KERNEL);
+		break;
+	case PH_CONTROL_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		switch (hh->id) {
+		case HFC_SPL_LOOP_ON: /* set sample loop */
+			if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG
+			    "%s: HFC_SPL_LOOP_ON (len = %d)\n",
+			    __func__, skb->len);
+			ret = 0;
+			break;
+		case HFC_SPL_LOOP_OFF: /* set silence */
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n",
+				    __func__);
+			ret = 0;
+			break;
+		default:
+			printk(KERN_ERR
+			     "%s: unknown PH_CONTROL_REQ info %x\n",
+			     __func__, hh->id);
+			ret = -EINVAL;
+		}
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case PH_DEACTIVATE_REQ:
+		deactivate_bchannel(bch); /* locked there */
+		_queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
+			GFP_KERNEL);
+		ret = 0;
+		break;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+/*
+ * bchannel control function
+ */
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+	int			ret = 0;
+	struct dsp_features	*features =
+		(struct dsp_features *)(*((u_long *)&cq->p1));
+	struct hfc_multi	*hc = bch->hw;
+	int			slot_tx;
+	int			bank_tx;
+	int			slot_rx;
+	int			bank_rx;
+	int			num;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP
+			| MISDN_CTRL_RX_OFF;
+		break;
+	case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */
+		hc->chan[bch->slot].rx_off = !!cq->p1;
+		if (!hc->chan[bch->slot].rx_off) {
+			/* reset fifo on rx on */
+			HFC_outb_nodebug(hc, R_FIFO, (bch->slot << 1) | 1);
+			HFC_wait_nodebug(hc);
+			HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait_nodebug(hc);
+		}
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n",
+			    __func__, bch->nr, hc->chan[bch->slot].rx_off);
+		break;
+	case MISDN_CTRL_HW_FEATURES: /* fill features structure */
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HW_FEATURE request\n",
+			    __func__);
+		/* create confirm */
+		features->hfc_id = hc->id;
+		if (test_bit(HFC_CHIP_DTMF, &hc->chip))
+			features->hfc_dtmf = 1;
+		features->hfc_loops = 0;
+		if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+			features->hfc_echocanhw = 1;
+		} else {
+			features->pcm_id = hc->pcm;
+			features->pcm_slots = hc->slots;
+			features->pcm_banks = 2;
+		}
+		break;
+	case MISDN_CTRL_HFC_PCM_CONN: /* connect to pcm timeslot (0..N) */
+		slot_tx = cq->p1 & 0xff;
+		bank_tx = cq->p1 >> 8;
+		slot_rx = cq->p2 & 0xff;
+		bank_rx = cq->p2 >> 8;
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG
+			    "%s: HFC_PCM_CONN slot %d bank %d (TX) "
+			    "slot %d bank %d (RX)\n",
+			    __func__, slot_tx, bank_tx,
+			    slot_rx, bank_rx);
+		if (slot_tx < hc->slots && bank_tx <= 2 &&
+		    slot_rx < hc->slots && bank_rx <= 2)
+			hfcmulti_pcm(hc, bch->slot,
+			    slot_tx, bank_tx, slot_rx, bank_rx);
+		else {
+			printk(KERN_WARNING
+			    "%s: HFC_PCM_CONN slot %d bank %d (TX) "
+			    "slot %d bank %d (RX) out of range\n",
+			    __func__, slot_tx, bank_tx,
+			    slot_rx, bank_rx);
+			ret = -EINVAL;
+		}
+		break;
+	case MISDN_CTRL_HFC_PCM_DISC: /* release interface from pcm timeslot */
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_PCM_DISC\n",
+			    __func__);
+		hfcmulti_pcm(hc, bch->slot, -1, 0, -1, 0);
+		break;
+	case MISDN_CTRL_HFC_CONF_JOIN: /* join conference (0..7) */
+		num = cq->p1 & 0xff;
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n",
+			    __func__, num);
+		if (num <= 7)
+			hfcmulti_conf(hc, bch->slot, num);
+		else {
+			printk(KERN_WARNING
+			    "%s: HW_CONF_JOIN conf %d out of range\n",
+			    __func__, num);
+			ret = -EINVAL;
+		}
+		break;
+	case MISDN_CTRL_HFC_CONF_SPLIT: /* split conference */
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__);
+		hfcmulti_conf(hc, bch->slot, -1);
+		break;
+	case MISDN_CTRL_HFC_ECHOCAN_ON:
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__);
+		if (test_bit(HFC_CHIP_B410P, &hc->chip))
+			vpm_echocan_on(hc, bch->slot, cq->p1);
+		else
+			ret = -EINVAL;
+		break;
+
+	case MISDN_CTRL_HFC_ECHOCAN_OFF:
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n",
+				__func__);
+		if (test_bit(HFC_CHIP_B410P, &hc->chip))
+			vpm_echocan_off(hc, bch->slot);
+		else
+			ret = -EINVAL;
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct bchannel		*bch = container_of(ch, struct bchannel, ch);
+	struct hfc_multi	*hc = bch->hw;
+	int			err = -EINVAL;
+	u_long	flags;
+
+	if (bch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case CLOSE_CHANNEL:
+		test_and_clear_bit(FLG_OPEN, &bch->Flags);
+		if (test_bit(FLG_ACTIVE, &bch->Flags))
+			deactivate_bchannel(bch); /* locked there */
+		ch->protocol = ISDN_P_NONE;
+		ch->peer = NULL;
+		module_put(THIS_MODULE);
+		err = 0;
+		break;
+	case CONTROL_CHANNEL:
+		spin_lock_irqsave(&hc->lock, flags);
+		err = channel_bctrl(bch, arg);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown prim(%x)\n",
+			__func__, cmd);
+	}
+	return err;
+}
+
+/*
+ * handle D-channel events
+ *
+ * handle state change event
+ */
+static void
+ph_state_change(struct dchannel *dch)
+{
+	struct hfc_multi *hc = dch->hw;
+	int ch, i;
+
+	if (!dch) {
+		printk(KERN_WARNING "%s: ERROR given dch is NULL\n",
+		    __func__);
+		return;
+	}
+	ch = dch->slot;
+
+	if (hc->type == 1) {
+		if (dch->dev.D.protocol == ISDN_P_TE_E1) {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG
+				    "%s: E1 TE (id=%d) newstate %x\n",
+				    __func__, hc->id, dch->state);
+		} else {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG
+				    "%s: E1 NT (id=%d) newstate %x\n",
+				    __func__, hc->id, dch->state);
+		}
+		switch (dch->state) {
+		case (1):
+			if (hc->e1_state != 1) {
+			    for (i = 1; i <= 31; i++) {
+				/* reset fifos on e1 activation */
+				HFC_outb_nodebug(hc, R_FIFO, (i << 1) | 1);
+				HFC_wait_nodebug(hc);
+				HFC_outb_nodebug(hc,
+					R_INC_RES_FIFO, V_RES_F);
+				HFC_wait_nodebug(hc);
+			    }
+			}
+			test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+			_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+			    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+			break;
+
+		default:
+			if (hc->e1_state != 1)
+				return;
+			test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+			_queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
+			    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+		}
+		hc->e1_state = dch->state;
+	} else {
+		if (dch->dev.D.protocol == ISDN_P_TE_S0) {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG
+				    "%s: S/T TE newstate %x\n",
+				    __func__, dch->state);
+			switch (dch->state) {
+			case (0):
+				l1_event(dch->l1, HW_RESET_IND);
+				break;
+			case (3):
+				l1_event(dch->l1, HW_DEACT_IND);
+				break;
+			case (5):
+			case (8):
+				l1_event(dch->l1, ANYSIGNAL);
+				break;
+			case (6):
+				l1_event(dch->l1, INFO2);
+				break;
+			case (7):
+				l1_event(dch->l1, INFO4_P8);
+				break;
+			}
+		} else {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG "%s: S/T NT newstate %x\n",
+				    __func__, dch->state);
+			switch (dch->state) {
+			case (2):
+				if (hc->chan[ch].nt_timer == 0) {
+					hc->chan[ch].nt_timer = -1;
+					HFC_outb(hc, R_ST_SEL,
+					    hc->chan[ch].port);
+					/* undocumented: delay after R_ST_SEL */
+					udelay(1);
+					HFC_outb(hc, A_ST_WR_STATE, 4 |
+					    V_ST_LD_STA); /* G4 */
+					udelay(6); /* wait at least 5,21us */
+					HFC_outb(hc, A_ST_WR_STATE, 4);
+					dch->state = 4;
+				} else {
+					/* one extra count for the next event */
+					hc->chan[ch].nt_timer =
+					    nt_t1_count[poll_timer] + 1;
+					HFC_outb(hc, R_ST_SEL,
+					    hc->chan[ch].port);
+					/* undocumented: delay after R_ST_SEL */
+					udelay(1);
+					/* allow G2 -> G3 transition */
+					HFC_outb(hc, A_ST_WR_STATE, 2 |
+					    V_SET_G2_G3);
+				}
+				break;
+			case (1):
+				hc->chan[ch].nt_timer = -1;
+				test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+				_queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
+				    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+				break;
+			case (4):
+				hc->chan[ch].nt_timer = -1;
+				break;
+			case (3):
+				hc->chan[ch].nt_timer = -1;
+				test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+				_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+				    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+				break;
+			}
+		}
+	}
+}
+
+/*
+ * called for card mode init message
+ */
+
+static void
+hfcmulti_initmode(struct dchannel *dch)
+{
+	struct hfc_multi *hc = dch->hw;
+	u_char		a_st_wr_state, r_e1_wr_sta;
+	int		i, pt;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+
+	if (hc->type == 1) {
+		hc->chan[hc->dslot].slot_tx = -1;
+		hc->chan[hc->dslot].slot_rx = -1;
+		hc->chan[hc->dslot].conf = -1;
+		if (hc->dslot) {
+			mode_hfcmulti(hc, hc->dslot, dch->dev.D.protocol,
+				-1, 0, -1, 0);
+			dch->timer.function = (void *) hfcmulti_dbusy_timer;
+			dch->timer.data = (long) dch;
+			init_timer(&dch->timer);
+		}
+		for (i = 1; i <= 31; i++) {
+			if (i == hc->dslot)
+				continue;
+			hc->chan[i].slot_tx = -1;
+			hc->chan[i].slot_rx = -1;
+			hc->chan[i].conf = -1;
+			mode_hfcmulti(hc, i, ISDN_P_NONE, -1, 0, -1, 0);
+		}
+		/* E1 */
+		if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
+			HFC_outb(hc, R_LOS0, 255); /* 2 ms */
+			HFC_outb(hc, R_LOS1, 255); /* 512 ms */
+		}
+		if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dslot].cfg)) {
+			HFC_outb(hc, R_RX0, 0);
+			hc->hw.r_tx0 = 0 | V_OUT_EN;
+		} else {
+			HFC_outb(hc, R_RX0, 1);
+			hc->hw.r_tx0 = 1 | V_OUT_EN;
+		}
+		hc->hw.r_tx1 = V_ATX | V_NTRI;
+		HFC_outb(hc, R_TX0, hc->hw.r_tx0);
+		HFC_outb(hc, R_TX1, hc->hw.r_tx1);
+		HFC_outb(hc, R_TX_FR0, 0x00);
+		HFC_outb(hc, R_TX_FR1, 0xf8);
+
+		if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
+			HFC_outb(hc, R_TX_FR2, V_TX_MF | V_TX_E | V_NEG_E);
+
+		HFC_outb(hc, R_RX_FR0, V_AUTO_RESYNC | V_AUTO_RECO | 0);
+
+		if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
+			HFC_outb(hc, R_RX_FR1, V_RX_MF | V_RX_MF_SYNC);
+
+		if (dch->dev.D.protocol == ISDN_P_NT_E1) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG "%s: E1 port is NT-mode\n",
+				    __func__);
+			r_e1_wr_sta = 0; /* G0 */
+			hc->e1_getclock = 0;
+		} else {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG "%s: E1 port is TE-mode\n",
+				    __func__);
+			r_e1_wr_sta = 0; /* F0 */
+			hc->e1_getclock = 1;
+		}
+		if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
+			HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
+		else
+			HFC_outb(hc, R_SYNC_OUT, 0);
+		if (test_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip))
+			hc->e1_getclock = 1;
+		if (test_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip))
+			hc->e1_getclock = 0;
+		if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+			/* SLAVE (clock master) */
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: E1 port is clock master "
+				    "(clock from PCM)\n", __func__);
+			HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | V_PCM_SYNC);
+		} else {
+			if (hc->e1_getclock) {
+				/* MASTER (clock slave) */
+				if (debug & DEBUG_HFCMULTI_INIT)
+					printk(KERN_DEBUG
+					    "%s: E1 port is clock slave "
+					    "(clock to PCM)\n", __func__);
+				HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
+			} else {
+				/* MASTER (clock master) */
+				if (debug & DEBUG_HFCMULTI_INIT)
+					printk(KERN_DEBUG "%s: E1 port is "
+					    "clock master "
+					    "(clock from QUARTZ)\n",
+					    __func__);
+				HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC |
+				    V_PCM_SYNC | V_JATT_OFF);
+				HFC_outb(hc, R_SYNC_OUT, 0);
+			}
+		}
+		HFC_outb(hc, R_JATT_ATT, 0x9c); /* undoc register */
+		HFC_outb(hc, R_PWM_MD, V_PWM0_MD);
+		HFC_outb(hc, R_PWM0, 0x50);
+		HFC_outb(hc, R_PWM1, 0xff);
+		/* state machine setup */
+		HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta | V_E1_LD_STA);
+		udelay(6); /* wait at least 5,21us */
+		HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta);
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized = 0;
+			plxsd_checksync(hc, 0);
+		}
+	} else {
+		i = dch->slot;
+		hc->chan[i].slot_tx = -1;
+		hc->chan[i].slot_rx = -1;
+		hc->chan[i].conf = -1;
+		mode_hfcmulti(hc, i, dch->dev.D.protocol, -1, 0, -1, 0);
+		dch->timer.function = (void *)hfcmulti_dbusy_timer;
+		dch->timer.data = (long) dch;
+		init_timer(&dch->timer);
+		hc->chan[i - 2].slot_tx = -1;
+		hc->chan[i - 2].slot_rx = -1;
+		hc->chan[i - 2].conf = -1;
+		mode_hfcmulti(hc, i - 2, ISDN_P_NONE, -1, 0, -1, 0);
+		hc->chan[i - 1].slot_tx = -1;
+		hc->chan[i - 1].slot_rx = -1;
+		hc->chan[i - 1].conf = -1;
+		mode_hfcmulti(hc, i - 1, ISDN_P_NONE, -1, 0, -1, 0);
+		/* ST */
+		pt = hc->chan[i].port;
+		/* select interface */
+		HFC_outb(hc, R_ST_SEL, pt);
+		/* undocumented: delay after R_ST_SEL */
+		udelay(1);
+		if (dch->dev.D.protocol == ISDN_P_NT_S0) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: ST port %d is NT-mode\n",
+				    __func__, pt);
+			/* clock delay */
+			HFC_outb(hc, A_ST_CLK_DLY, clockdelay_nt);
+			a_st_wr_state = 1; /* G1 */
+			hc->hw.a_st_ctrl0[pt] = V_ST_MD;
+		} else {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: ST port %d is TE-mode\n",
+				    __func__, pt);
+			/* clock delay */
+			HFC_outb(hc, A_ST_CLK_DLY, clockdelay_te);
+			a_st_wr_state = 2; /* F2 */
+			hc->hw.a_st_ctrl0[pt] = 0;
+		}
+		if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg))
+			hc->hw.a_st_ctrl0[pt] |= V_TX_LI;
+		/* line setup */
+		HFC_outb(hc, A_ST_CTRL0,  hc->hw.a_st_ctrl0[pt]);
+		/* disable E-channel */
+		if ((dch->dev.D.protocol == ISDN_P_NT_S0) ||
+		    test_bit(HFC_CFG_DIS_ECHANNEL, &hc->chan[i].cfg))
+			HFC_outb(hc, A_ST_CTRL1, V_E_IGNO);
+		else
+			HFC_outb(hc, A_ST_CTRL1, 0);
+		/* enable B-channel receive */
+		HFC_outb(hc, A_ST_CTRL2,  V_B1_RX_EN | V_B2_RX_EN);
+		/* state machine setup */
+		HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state | V_ST_LD_STA);
+		udelay(6); /* wait at least 5,21us */
+		HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state);
+		hc->hw.r_sci_msk |= 1 << pt;
+		/* state machine interrupts */
+		HFC_outb(hc, R_SCI_MSK, hc->hw.r_sci_msk);
+		/* unset sync on port */
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized &=
+			   ~(1 << hc->chan[dch->slot].port);
+			plxsd_checksync(hc, 0);
+		}
+	}
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk("%s: done\n", __func__);
+}
+
+
+static int
+open_dchannel(struct hfc_multi *hc, struct dchannel *dch,
+    struct channel_req *rq)
+{
+	int	err = 0;
+	u_long	flags;
+
+	if (debug & DEBUG_HW_OPEN)
+		printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
+		    dch->dev.id, __builtin_return_address(0));
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	if ((dch->dev.D.protocol != ISDN_P_NONE) &&
+	    (dch->dev.D.protocol != rq->protocol)) {
+	    if (debug & DEBUG_HFCMULTI_MODE)
+		printk(KERN_WARNING "%s: change protocol %x to %x\n",
+		    __func__, dch->dev.D.protocol, rq->protocol);
+	}
+	if ((dch->dev.D.protocol == ISDN_P_TE_S0)
+	 && (rq->protocol != ISDN_P_TE_S0))
+		l1_event(dch->l1, CLOSE_CHANNEL);
+	if (dch->dev.D.protocol != rq->protocol) {
+		if (rq->protocol == ISDN_P_TE_S0) {
+			err = create_l1(dch, hfcm_l1callback);
+			if (err)
+				return err;
+		}
+		dch->dev.D.protocol = rq->protocol;
+		spin_lock_irqsave(&hc->lock, flags);
+		hfcmulti_initmode(dch);
+		spin_unlock_irqrestore(&hc->lock, flags);
+	}
+
+	if (((rq->protocol == ISDN_P_NT_S0) && (dch->state == 3)) ||
+	    ((rq->protocol == ISDN_P_TE_S0) && (dch->state == 7)) ||
+	    ((rq->protocol == ISDN_P_NT_E1) && (dch->state == 1)) ||
+	    ((rq->protocol == ISDN_P_TE_E1) && (dch->state == 1))) {
+		_queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY,
+		    0, NULL, GFP_KERNEL);
+	}
+	rq->ch = &dch->dev.D;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+static int
+open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
+    struct channel_req *rq)
+{
+	struct bchannel	*bch;
+	int		ch;
+
+	if (!test_bit(rq->adr.channel, &dch->dev.channelmap[0]))
+		return -EINVAL;
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	if (hc->type == 1)
+		ch = rq->adr.channel;
+	else
+		ch = (rq->adr.channel - 1) + (dch->slot - 2);
+	bch = hc->chan[ch].bch;
+	if (!bch) {
+		printk(KERN_ERR "%s:internal error ch %d has no bch\n",
+		    __func__, ch);
+		return -EINVAL;
+	}
+	if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+		return -EBUSY; /* b-channel can be only open once */
+	bch->ch.protocol = rq->protocol;
+	hc->chan[ch].rx_off = 0;
+	rq->ch = &bch->ch;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+/*
+ * device control function
+ */
+static int
+channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
+{
+	int	ret = 0;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = 0;
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct hfc_multi	*hc = dch->hw;
+	struct channel_req	*rq;
+	int			err = 0;
+	u_long			flags;
+
+	if (dch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		rq = arg;
+		switch (rq->protocol) {
+		case ISDN_P_TE_S0:
+		case ISDN_P_NT_S0:
+			if (hc->type == 1) {
+				err = -EINVAL;
+				break;
+			}
+			err = open_dchannel(hc, dch, rq); /* locked there */
+			break;
+		case ISDN_P_TE_E1:
+		case ISDN_P_NT_E1:
+			if (hc->type != 1) {
+				err = -EINVAL;
+				break;
+			}
+			err = open_dchannel(hc, dch, rq); /* locked there */
+			break;
+		default:
+			spin_lock_irqsave(&hc->lock, flags);
+			err = open_bchannel(hc, dch, rq);
+			spin_unlock_irqrestore(&hc->lock, flags);
+		}
+		break;
+	case CLOSE_CHANNEL:
+		if (debug & DEBUG_HW_OPEN)
+			printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
+			    __func__, dch->dev.id,
+			    __builtin_return_address(0));
+		module_put(THIS_MODULE);
+		break;
+	case CONTROL_CHANNEL:
+		spin_lock_irqsave(&hc->lock, flags);
+		err = channel_dctrl(dch, arg);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		err = -EINVAL;
+	}
+	return err;
+}
+
+/*
+ * initialize the card
+ */
+
+/*
+ * start timer irq, wait some time and check if we have interrupts.
+ * if not, reset chip and try again.
+ */
+static int
+init_card(struct hfc_multi *hc)
+{
+	int	err = -EIO;
+	u_long	flags;
+	u_short	*plx_acc;
+	u_long	plx_flags;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+
+	spin_lock_irqsave(&hc->lock, flags);
+	/* set interrupts but leave global interrupt disabled */
+	hc->hw.r_irq_ctrl = V_FIFO_IRQ;
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+
+	if (request_irq(hc->pci_dev->irq, hfcmulti_interrupt, IRQF_SHARED,
+	    "HFC-multi", hc)) {
+		printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n",
+		    hc->pci_dev->irq);
+		return -EIO;
+	}
+	hc->irq = hc->pci_dev->irq;
+
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
+		writew((PLX_INTCSR_PCIINT_ENABLE | PLX_INTCSR_LINTI1_ENABLE),
+			plx_acc); /* enable PCI & LINT1 irq */
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: IRQ %d count %d\n",
+		    __func__, hc->irq, hc->irqcnt);
+	err = init_chip(hc);
+	if (err)
+		goto error;
+	/*
+	 * Finally enable IRQ output
+	 * this is only allowed, if an IRQ routine is allready
+	 * established for this HFC, so don't do that earlier
+	 */
+	spin_lock_irqsave(&hc->lock, flags);
+	enable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	/* printk(KERN_DEBUG "no master irq set!!!\n"); */
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout((100*HZ)/1000); /* Timeout 100ms */
+	/* turn IRQ off until chip is completely initialized */
+	spin_lock_irqsave(&hc->lock, flags);
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: IRQ %d count %d\n",
+		    __func__, hc->irq, hc->irqcnt);
+	if (hc->irqcnt) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: done\n", __func__);
+
+		return 0;
+	}
+	if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+		printk(KERN_INFO "ignoring missing interrupts\n");
+		return 0;
+	}
+
+	printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n",
+		hc->irq);
+
+	err = -EIO;
+
+error:
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
+		writew(0x00, plx_acc); /*disable IRQs*/
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: free irq %d\n", __func__, hc->irq);
+	if (hc->irq) {
+		free_irq(hc->irq, hc);
+		hc->irq = 0;
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err);
+	return err;
+}
+
+/*
+ * find pci device and set it up
+ */
+
+static int
+setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+	struct hm_map	*m = (struct hm_map *)ent->driver_data;
+
+	printk(KERN_INFO
+	    "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
+	    m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
+
+	hc->pci_dev = pdev;
+	if (m->clock2)
+		test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
+
+	if (ent->device == 0xB410) {
+		test_and_set_bit(HFC_CHIP_B410P, &hc->chip);
+		test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
+		test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+		hc->slots = 32;
+	}
+
+	if (hc->pci_dev->irq <= 0) {
+		printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n");
+		return -EIO;
+	}
+	if (pci_enable_device(hc->pci_dev)) {
+		printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n");
+		return -EIO;
+	}
+	hc->leds = m->leds;
+	hc->ledstate = 0xAFFEAFFE;
+	hc->opticalsupport = m->opticalsupport;
+
+	/* set memory access methods */
+	if (m->io_mode) /* use mode from card config */
+		hc->io_mode = m->io_mode;
+	switch (hc->io_mode) {
+	case HFC_IO_MODE_PLXSD:
+		test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip);
+		hc->slots = 128; /* required */
+		/* fall through */
+	case HFC_IO_MODE_PCIMEM:
+		hc->HFC_outb = HFC_outb_pcimem;
+		hc->HFC_inb = HFC_inb_pcimem;
+		hc->HFC_inw = HFC_inw_pcimem;
+		hc->HFC_wait = HFC_wait_pcimem;
+		hc->read_fifo = read_fifo_pcimem;
+		hc->write_fifo = write_fifo_pcimem;
+		break;
+	case HFC_IO_MODE_REGIO:
+		hc->HFC_outb = HFC_outb_regio;
+		hc->HFC_inb = HFC_inb_regio;
+		hc->HFC_inw = HFC_inw_regio;
+		hc->HFC_wait = HFC_wait_regio;
+		hc->read_fifo = read_fifo_regio;
+		hc->write_fifo = write_fifo_regio;
+		break;
+	default:
+		printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
+		pci_disable_device(hc->pci_dev);
+		return -EIO;
+	}
+	hc->HFC_outb_nodebug = hc->HFC_outb;
+	hc->HFC_inb_nodebug = hc->HFC_inb;
+	hc->HFC_inw_nodebug = hc->HFC_inw;
+	hc->HFC_wait_nodebug = hc->HFC_wait;
+#ifdef HFC_REGISTER_DEBUG
+	hc->HFC_outb = HFC_outb_debug;
+	hc->HFC_inb = HFC_inb_debug;
+	hc->HFC_inw = HFC_inw_debug;
+	hc->HFC_wait = HFC_wait_debug;
+#endif
+	hc->pci_iobase = 0;
+	hc->pci_membase = NULL;
+	hc->plx_membase = NULL;
+
+	switch (hc->io_mode) {
+	case HFC_IO_MODE_PLXSD:
+		hc->plx_origmembase =  hc->pci_dev->resource[0].start;
+		/* MEMBASE 1 is PLX PCI Bridge */
+
+		if (!hc->plx_origmembase) {
+			printk(KERN_WARNING
+			  "HFC-multi: No IO-Memory for PCI PLX bridge found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		hc->plx_membase = ioremap(hc->plx_origmembase, 0x80);
+		if (!hc->plx_membase) {
+			printk(KERN_WARNING
+			    "HFC-multi: failed to remap plx address space. "
+			    "(internal error)\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+		printk(KERN_INFO
+		    "HFC-multi: plx_membase:%#lx plx_origmembase:%#lx\n",
+		    (u_long)hc->plx_membase, hc->plx_origmembase);
+
+		hc->pci_origmembase =  hc->pci_dev->resource[2].start;
+		    /* MEMBASE 1 is PLX PCI Bridge */
+		if (!hc->pci_origmembase) {
+			printk(KERN_WARNING
+			    "HFC-multi: No IO-Memory for PCI card found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		hc->pci_membase = ioremap(hc->pci_origmembase, 0x400);
+		if (!hc->pci_membase) {
+			printk(KERN_WARNING "HFC-multi: failed to remap io "
+			    "address space. (internal error)\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		printk(KERN_INFO
+		    "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d HZ %d "
+		    "leds-type %d\n",
+		    hc->id, (u_long)hc->pci_membase, hc->pci_origmembase,
+		    hc->pci_dev->irq, HZ, hc->leds);
+		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
+		break;
+	case HFC_IO_MODE_PCIMEM:
+		hc->pci_origmembase = hc->pci_dev->resource[1].start;
+		if (!hc->pci_origmembase) {
+			printk(KERN_WARNING
+			    "HFC-multi: No IO-Memory for PCI card found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		hc->pci_membase = ioremap(hc->pci_origmembase, 256);
+		if (!hc->pci_membase) {
+			printk(KERN_WARNING
+			    "HFC-multi: failed to remap io address space. "
+			    "(internal error)\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+		printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d "
+		    "HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
+		    hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds);
+		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
+		break;
+	case HFC_IO_MODE_REGIO:
+		hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start;
+		if (!hc->pci_iobase) {
+			printk(KERN_WARNING
+				"HFC-multi: No IO for PCI card found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		if (!request_region(hc->pci_iobase, 8, "hfcmulti")) {
+			printk(KERN_WARNING "HFC-multi: failed to request "
+			    "address space at 0x%08lx (internal error)\n",
+			    hc->pci_iobase);
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		printk(KERN_INFO
+		    "%s %s: defined at IOBASE %#x IRQ %d HZ %d leds-type %d\n",
+		    m->vendor_name, m->card_name, (u_int) hc->pci_iobase,
+		    hc->pci_dev->irq, HZ, hc->leds);
+		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_REGIO);
+		break;
+	default:
+		printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
+		pci_disable_device(hc->pci_dev);
+		return -EIO;
+	}
+
+	pci_set_drvdata(hc->pci_dev, hc);
+
+	/* At this point the needed PCI config is done */
+	/* fifos are still not enabled */
+	return 0;
+}
+
+
+/*
+ * remove port
+ */
+
+static void
+release_port(struct hfc_multi *hc, struct dchannel *dch)
+{
+	int	pt, ci, i = 0;
+	u_long	flags;
+	struct bchannel *pb;
+
+	ci = dch->slot;
+	pt = hc->chan[ci].port;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered for port %d\n",
+			__func__, pt + 1);
+
+	if (pt >= hc->ports) {
+		printk(KERN_WARNING "%s: ERROR port out of range (%d).\n",
+		     __func__, pt + 1);
+		return;
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: releasing port=%d\n",
+		    __func__, pt + 1);
+
+	if (dch->dev.D.protocol == ISDN_P_TE_S0)
+		l1_event(dch->l1, CLOSE_CHANNEL);
+
+	hc->chan[ci].dch = NULL;
+
+	if (hc->created[pt]) {
+		hc->created[pt] = 0;
+		mISDN_unregister_device(&dch->dev);
+	}
+
+	spin_lock_irqsave(&hc->lock, flags);
+
+	if (dch->timer.function) {
+		del_timer(&dch->timer);
+		dch->timer.function = NULL;
+	}
+
+	if (hc->type == 1) { /* E1 */
+		/* remove sync */
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized = 0;
+			plxsd_checksync(hc, 1);
+		}
+		/* free channels */
+		for (i = 0; i <= 31; i++) {
+			if (hc->chan[i].bch) {
+				if (debug & DEBUG_HFCMULTI_INIT)
+					printk(KERN_DEBUG
+					    "%s: free port %d channel %d\n",
+					    __func__, hc->chan[i].port+1, i);
+				pb = hc->chan[i].bch;
+				hc->chan[i].bch = NULL;
+				spin_unlock_irqrestore(&hc->lock, flags);
+				mISDN_freebchannel(pb);
+				kfree(pb);
+				kfree(hc->chan[i].coeff);
+				spin_lock_irqsave(&hc->lock, flags);
+			}
+		}
+	} else {
+		/* remove sync */
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized &=
+			   ~(1 << hc->chan[ci].port);
+			plxsd_checksync(hc, 1);
+		}
+		/* free channels */
+		if (hc->chan[ci - 2].bch) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: free port %d channel %d\n",
+				    __func__, hc->chan[ci - 2].port+1,
+				    ci - 2);
+			pb = hc->chan[ci - 2].bch;
+			hc->chan[ci - 2].bch = NULL;
+			spin_unlock_irqrestore(&hc->lock, flags);
+			mISDN_freebchannel(pb);
+			kfree(pb);
+			kfree(hc->chan[ci - 2].coeff);
+			spin_lock_irqsave(&hc->lock, flags);
+		}
+		if (hc->chan[ci - 1].bch) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: free port %d channel %d\n",
+				    __func__, hc->chan[ci - 1].port+1,
+				    ci - 1);
+			pb = hc->chan[ci - 1].bch;
+			hc->chan[ci - 1].bch = NULL;
+			spin_unlock_irqrestore(&hc->lock, flags);
+			mISDN_freebchannel(pb);
+			kfree(pb);
+			kfree(hc->chan[ci - 1].coeff);
+			spin_lock_irqsave(&hc->lock, flags);
+		}
+	}
+
+	spin_unlock_irqrestore(&hc->lock, flags);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: free port %d channel D\n", __func__, pt);
+	mISDN_freedchannel(dch);
+	kfree(dch);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done!\n", __func__);
+}
+
+static void
+release_card(struct hfc_multi *hc)
+{
+	u_long	flags;
+	int	ch;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: release card (%d) entered\n",
+		    __func__, hc->id);
+
+	spin_lock_irqsave(&hc->lock, flags);
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+
+	udelay(1000);
+
+	/* dimm leds */
+	if (hc->leds)
+		hfcmulti_leds(hc);
+
+	/* disable D-channels & B-channels */
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: disable all channels (d and b)\n",
+		    __func__);
+	for (ch = 0; ch <= 31; ch++) {
+		if (hc->chan[ch].dch)
+			release_port(hc, hc->chan[ch].dch);
+	}
+
+	/* release hardware & irq */
+	if (hc->irq) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: free irq %d\n",
+			    __func__, hc->irq);
+		free_irq(hc->irq, hc);
+		hc->irq = 0;
+
+	}
+	release_io_hfcmulti(hc);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: remove instance from list\n",
+		     __func__);
+	list_del(&hc->list);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: delete instance\n", __func__);
+	if (hc == syncmaster)
+		syncmaster = NULL;
+	kfree(hc);
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: card successfully removed\n",
+		    __func__);
+}
+
+static int
+init_e1_port(struct hfc_multi *hc, struct hm_map *m)
+{
+	struct dchannel	*dch;
+	struct bchannel	*bch;
+	int		ch, ret = 0;
+	char		name[MISDN_MAX_IDLEN];
+
+	dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
+	if (!dch)
+		return -ENOMEM;
+	dch->debug = debug;
+	mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
+	dch->hw = hc;
+	dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1);
+	dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+	dch->dev.D.send = handle_dmsg;
+	dch->dev.D.ctrl = hfcm_dctrl;
+	dch->dev.nrbchan = (hc->dslot)?30:31;
+	dch->slot = hc->dslot;
+	hc->chan[hc->dslot].dch = dch;
+	hc->chan[hc->dslot].port = 0;
+	hc->chan[hc->dslot].nt_timer = -1;
+	for (ch = 1; ch <= 31; ch++) {
+		if (ch == hc->dslot) /* skip dchannel */
+			continue;
+		bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
+		if (!bch) {
+			printk(KERN_ERR "%s: no memory for bchannel\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL);
+		if (!hc->chan[ch].coeff) {
+			printk(KERN_ERR "%s: no memory for coeffs\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		bch->nr = ch;
+		bch->slot = ch;
+		bch->debug = debug;
+		mISDN_initbchannel(bch, MAX_DATA_MEM);
+		bch->hw = hc;
+		bch->ch.send = handle_bmsg;
+		bch->ch.ctrl = hfcm_bctrl;
+		bch->ch.nr = ch;
+		list_add(&bch->ch.list, &dch->dev.bchannels);
+		hc->chan[ch].bch = bch;
+		hc->chan[ch].port = 0;
+		test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
+	}
+	/* set optical line type */
+	if (port[Port_cnt] & 0x001) {
+		if (!m->opticalsupport)  {
+			printk(KERN_INFO
+			    "This board has no optical "
+			    "support\n");
+		} else {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: PORT set optical "
+				    "interfacs: card(%d) "
+				    "port(%d)\n",
+				    __func__,
+				    HFC_cnt + 1, 1);
+			test_and_set_bit(HFC_CFG_OPTICAL,
+			    &hc->chan[hc->dslot].cfg);
+		}
+	}
+	/* set LOS report */
+	if (port[Port_cnt] & 0x004) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT set "
+			    "LOS report: card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_LOS,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set AIS report */
+	if (port[Port_cnt] & 0x008) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT set "
+			    "AIS report: card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_AIS,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set SLIP report */
+	if (port[Port_cnt] & 0x010) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PORT set SLIP report: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_SLIP,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set RDI report */
+	if (port[Port_cnt] & 0x020) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PORT set RDI report: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_RDI,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set CRC-4 Mode */
+	if (!(port[Port_cnt] & 0x100)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT turn on CRC4 report:"
+				" card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_CRC4,
+		    &hc->chan[hc->dslot].cfg);
+	} else {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT turn off CRC4"
+				" report: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+	}
+	/* set forced clock */
+	if (port[Port_cnt] & 0x0200) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT force getting clock from "
+				"E1: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip);
+	} else
+	if (port[Port_cnt] & 0x0400) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT force putting clock to "
+				"E1: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip);
+	}
+	/* set JATT PLL */
+	if (port[Port_cnt] & 0x0800) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT disable JATT PLL on "
+				"E1: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CHIP_RX_SYNC, &hc->chip);
+	}
+	/* set elastic jitter buffer */
+	if (port[Port_cnt] & 0x3000) {
+		hc->chan[hc->dslot].jitter = (port[Port_cnt]>>12) & 0x3;
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PORT set elastic "
+			    "buffer to %d: card(%d) port(%d)\n",
+			    __func__, hc->chan[hc->dslot].jitter,
+			    HFC_cnt + 1, 1);
+	} else
+		hc->chan[hc->dslot].jitter = 2; /* default */
+	snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1);
+	ret = mISDN_register_device(&dch->dev, name);
+	if (ret)
+		goto free_chan;
+	hc->created[0] = 1;
+	return ret;
+free_chan:
+	release_port(hc, dch);
+	return ret;
+}
+
+static int
+init_multi_port(struct hfc_multi *hc, int pt)
+{
+	struct dchannel	*dch;
+	struct bchannel	*bch;
+	int		ch, i, ret = 0;
+	char		name[MISDN_MAX_IDLEN];
+
+	dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
+	if (!dch)
+		return -ENOMEM;
+	dch->debug = debug;
+	mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
+	dch->hw = hc;
+	dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
+	dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+	dch->dev.D.send = handle_dmsg;
+	dch->dev.D.ctrl = hfcm_dctrl;
+	dch->dev.nrbchan = 2;
+	i = pt << 2;
+	dch->slot = i + 2;
+	hc->chan[i + 2].dch = dch;
+	hc->chan[i + 2].port = pt;
+	hc->chan[i + 2].nt_timer = -1;
+	for (ch = 0; ch < dch->dev.nrbchan; ch++) {
+		bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
+		if (!bch) {
+			printk(KERN_ERR "%s: no memory for bchannel\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		hc->chan[i + ch].coeff = kzalloc(512, GFP_KERNEL);
+		if (!hc->chan[i + ch].coeff) {
+			printk(KERN_ERR "%s: no memory for coeffs\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		bch->nr = ch + 1;
+		bch->slot = i + ch;
+		bch->debug = debug;
+		mISDN_initbchannel(bch, MAX_DATA_MEM);
+		bch->hw = hc;
+		bch->ch.send = handle_bmsg;
+		bch->ch.ctrl = hfcm_bctrl;
+		bch->ch.nr = ch + 1;
+		list_add(&bch->ch.list, &dch->dev.bchannels);
+		hc->chan[i + ch].bch = bch;
+		hc->chan[i + ch].port = pt;
+		test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
+	}
+	/* set master clock */
+	if (port[Port_cnt] & 0x001) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PROTOCOL set master clock: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, pt + 1);
+		if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+			printk(KERN_ERR "Error: Master clock "
+			    "for port(%d) of card(%d) is only"
+			    " possible with TE-mode\n",
+			    pt + 1, HFC_cnt + 1);
+			ret = -EINVAL;
+			goto free_chan;
+		}
+		if (hc->masterclk >= 0) {
+			printk(KERN_ERR "Error: Master clock "
+			    "for port(%d) of card(%d) already "
+			    "defined for port(%d)\n",
+			    pt + 1, HFC_cnt + 1, hc->masterclk+1);
+			ret = -EINVAL;
+			goto free_chan;
+		}
+		hc->masterclk = pt;
+	}
+	/* set transmitter line to non capacitive */
+	if (port[Port_cnt] & 0x002) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PROTOCOL set non capacitive "
+			    "transmitter: card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, pt + 1);
+		test_and_set_bit(HFC_CFG_NONCAP_TX,
+		    &hc->chan[i + 2].cfg);
+	}
+	/* disable E-channel */
+	if (port[Port_cnt] & 0x004) {
+	if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PROTOCOL disable E-channel: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, pt + 1);
+		test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
+		    &hc->chan[i + 2].cfg);
+	}
+	snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d/%d",
+		hc->type, HFC_cnt + 1, pt + 1);
+	ret = mISDN_register_device(&dch->dev, name);
+	if (ret)
+		goto free_chan;
+	hc->created[pt] = 1;
+	return ret;
+free_chan:
+	release_port(hc, dch);
+	return ret;
+}
+
+static int
+hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct hm_map	*m = (struct hm_map *)ent->driver_data;
+	int		ret_err = 0;
+	int		pt;
+	struct hfc_multi	*hc;
+	u_long		flags;
+	u_char		dips = 0, pmj = 0; /* dip settings, port mode Jumpers */
+
+	if (HFC_cnt >= MAX_CARDS) {
+		printk(KERN_ERR "too many cards (max=%d).\n",
+			MAX_CARDS);
+		return -EINVAL;
+	}
+	if ((type[HFC_cnt] & 0xff) && (type[HFC_cnt] & 0xff) != m->type) {
+		printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but "
+		    "type[%d] %d was supplied as module parameter\n",
+		    m->vendor_name, m->card_name, m->type, HFC_cnt,
+		    type[HFC_cnt] & 0xff);
+		printk(KERN_WARNING "HFC-MULTI: Load module without parameters "
+			"first, to see cards and their types.");
+		return -EINVAL;
+	}
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n",
+		    __func__, m->vendor_name, m->card_name, m->type,
+		    type[HFC_cnt]);
+
+	/* allocate card+fifo structure */
+	hc = kzalloc(sizeof(struct hfc_multi), GFP_KERNEL);
+	if (!hc) {
+		printk(KERN_ERR "No kmem for HFC-Multi card\n");
+		return -ENOMEM;
+	}
+	spin_lock_init(&hc->lock);
+	hc->mtyp = m;
+	hc->type =  m->type;
+	hc->ports = m->ports;
+	hc->id = HFC_cnt;
+	hc->pcm = pcm[HFC_cnt];
+	hc->io_mode = iomode[HFC_cnt];
+	if (dslot[HFC_cnt] < 0) {
+		hc->dslot = 0;
+		printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
+			"31 B-channels\n");
+	} if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32) {
+		hc->dslot = dslot[HFC_cnt];
+		printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
+			"time slot %d\n", dslot[HFC_cnt]);
+	} else
+		hc->dslot = 16;
+
+	/* set chip specific features */
+	hc->masterclk = -1;
+	if (type[HFC_cnt] & 0x100) {
+		test_and_set_bit(HFC_CHIP_ULAW, &hc->chip);
+		silence = 0xff; /* ulaw silence */
+	} else
+		silence = 0x2a; /* alaw silence */
+	if (!(type[HFC_cnt] & 0x200))
+		test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
+
+	if (type[HFC_cnt] & 0x800)
+		test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+	if (type[HFC_cnt] & 0x1000) {
+		test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
+		test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+	}
+	if (type[HFC_cnt] & 0x4000)
+		test_and_set_bit(HFC_CHIP_EXRAM_128, &hc->chip);
+	if (type[HFC_cnt] & 0x8000)
+		test_and_set_bit(HFC_CHIP_EXRAM_512, &hc->chip);
+	hc->slots = 32;
+	if (type[HFC_cnt] & 0x10000)
+		hc->slots = 64;
+	if (type[HFC_cnt] & 0x20000)
+		hc->slots = 128;
+	if (type[HFC_cnt] & 0x80000) {
+		test_and_set_bit(HFC_CHIP_WATCHDOG, &hc->chip);
+		hc->wdcount = 0;
+		hc->wdbyte = V_GPIO_OUT2;
+		printk(KERN_NOTICE "Watchdog enabled\n");
+	}
+
+	/* setup pci, hc->slots may change due to PLXSD */
+	ret_err = setup_pci(hc, pdev, ent);
+	if (ret_err) {
+		if (hc == syncmaster)
+			syncmaster = NULL;
+		kfree(hc);
+		return ret_err;
+	}
+
+	/* crate channels */
+	for (pt = 0; pt < hc->ports; pt++) {
+		if (Port_cnt >= MAX_PORTS) {
+			printk(KERN_ERR "too many ports (max=%d).\n",
+				MAX_PORTS);
+			ret_err = -EINVAL;
+			goto free_card;
+		}
+		if (hc->type == 1)
+			ret_err = init_e1_port(hc, m);
+		else
+			ret_err = init_multi_port(hc, pt);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: Registering D-channel, card(%d) port(%d)"
+			    "result %d\n",
+			    __func__, HFC_cnt + 1, pt, ret_err);
+
+		if (ret_err) {
+			while (pt) { /* release already registered ports */
+				pt--;
+				release_port(hc, hc->chan[(pt << 2) + 2].dch);
+			}
+			goto free_card;
+		}
+		Port_cnt++;
+	}
+
+	/* disp switches */
+	switch (m->dip_type) {
+	case DIP_4S:
+		/*
+		 * get DIP Setting for beroNet 1S/2S/4S cards
+		 *  check if Port Jumper config matches
+		 * module param 'protocol'
+		 * DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) +
+		 * GPI 19/23 (R_GPI_IN2))
+		 */
+		dips = ((~HFC_inb(hc, R_GPIO_IN1) & 0xE0) >> 5) |
+			((~HFC_inb(hc, R_GPI_IN2) & 0x80) >> 3) |
+			(~HFC_inb(hc, R_GPI_IN2) & 0x08);
+
+		/* Port mode (TE/NT) jumpers */
+		pmj = ((HFC_inb(hc, R_GPI_IN3) >> 4)  & 0xf);
+
+		if (test_bit(HFC_CHIP_B410P, &hc->chip))
+			pmj = ~pmj & 0xf;
+
+		printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n",
+			m->vendor_name, m->card_name, dips, pmj);
+		break;
+	case DIP_8S:
+		/*
+		 * get DIP Setting for beroNet 8S0+ cards
+		 *
+		 * enable PCI auxbridge function
+		 */
+		HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
+		/* prepare access to auxport */
+		outw(0x4000, hc->pci_iobase + 4);
+		/*
+		 * some dummy reads are required to
+		 * read valid DIP switch data
+		 */
+		dips = inb(hc->pci_iobase);
+		dips = inb(hc->pci_iobase);
+		dips = inb(hc->pci_iobase);
+		dips = ~inb(hc->pci_iobase) & 0x3F;
+		outw(0x0, hc->pci_iobase + 4);
+		/* disable PCI auxbridge function */
+		HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+		printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
+		    m->vendor_name, m->card_name, dips);
+		break;
+	case DIP_E1:
+		/*
+		 * get DIP Setting for beroNet E1 cards
+		 * DIP Setting: collect GPI 4/5/6/7 (R_GPI_IN0)
+		 */
+		dips = (~HFC_inb(hc, R_GPI_IN0) & 0xF0)>>4;
+		printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
+		    m->vendor_name, m->card_name, dips);
+		break;
+	}
+
+	/* add to list */
+	spin_lock_irqsave(&HFClock, flags);
+	list_add_tail(&hc->list, &HFClist);
+	spin_unlock_irqrestore(&HFClock, flags);
+
+	/* initialize hardware */
+	ret_err = init_card(hc);
+	if (ret_err) {
+		printk(KERN_ERR "init card returns %d\n", ret_err);
+		release_card(hc);
+		return ret_err;
+	}
+
+	/* start IRQ and return */
+	spin_lock_irqsave(&hc->lock, flags);
+	enable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	return 0;
+
+free_card:
+	release_io_hfcmulti(hc);
+	if (hc == syncmaster)
+		syncmaster = NULL;
+	kfree(hc);
+	return ret_err;
+}
+
+static void __devexit hfc_remove_pci(struct pci_dev *pdev)
+{
+	struct hfc_multi	*card = pci_get_drvdata(pdev);
+	u_long			flags;
+
+	if (debug)
+		printk(KERN_INFO "removing hfc_multi card vendor:%x "
+		    "device:%x subvendor:%x subdevice:%x\n",
+		    pdev->vendor, pdev->device,
+		    pdev->subsystem_vendor, pdev->subsystem_device);
+
+	if (card) {
+		spin_lock_irqsave(&HFClock, flags);
+		release_card(card);
+		spin_unlock_irqrestore(&HFClock, flags);
+	}  else {
+		if (debug)
+			printk(KERN_WARNING "%s: drvdata allready removed\n",
+			    __func__);
+	}
+}
+
+#define	VENDOR_CCD	"Cologne Chip AG"
+#define	VENDOR_BN	"beroNet GmbH"
+#define	VENDOR_DIG	"Digium Inc."
+#define VENDOR_JH	"Junghanns.NET GmbH"
+#define VENDOR_PRIM	"PrimuX"
+
+static const struct hm_map hfcm_map[] = {
+/*0*/	{VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0},
+/*1*/	{VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S},
+/*2*/	{VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0},
+/*3*/	{VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0},
+/*4*/	{VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0},
+/*5*/	{VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0},
+/*6*/	{VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, 0, 0},
+/*7*/	{VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0},
+/*8*/	{VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO},
+/*9*/	{VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0},
+/*10*/	{VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0},
+/*11*/	{VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0},
+
+/*12*/	{VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0},
+/*13*/	{VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S,
+		HFC_IO_MODE_REGIO},
+/*14*/	{VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0},
+/*15*/	{VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0},
+
+/*16*/	{VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0},
+/*17*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
+/*18*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
+
+/*19*/	{VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0},
+/*20*/	{VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0},
+/*21*/	{VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
+/*22*/	{VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
+
+/*23*/	{VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0},
+/*24*/	{VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0},
+/*25*/	{VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0},
+
+/*26*/	{VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0,
+		HFC_IO_MODE_PLXSD},
+/*27*/	{VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0,
+		HFC_IO_MODE_PLXSD},
+/*28*/	{VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0},
+/*29*/	{VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0},
+/*30*/	{VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0},
+};
+
+#undef H
+#define H(x)	((unsigned long)&hfcm_map[x])
+static struct pci_device_id hfmultipci_ids[] __devinitdata = {
+
+	/* Cards with HFC-4S Chip */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN1SM, 0, 0, H(0)}, /* BN1S mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN2S, 0, 0, H(1)}, /* BN2S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN2SM, 0, 0, H(2)}, /* BN2S mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN4S, 0, 0, H(3)}, /* BN4S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN4SM, 0, 0, H(4)}, /* BN4S mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_DEVICE_ID_CCD_HFC4S, 0, 0, H(5)}, /* Old Eval */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB4ST, 0, 0, H(6)}, /* IOB4ST */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_HFC4S, 0, 0, H(7)}, /* 4S */
+	{ PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S,
+		PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, 0, 0, H(8)},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_SWYX4S, 0, 0, H(9)}, /* 4S Swyx */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_JH4S20, 0, 0, H(10)},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_PMX2S, 0, 0, H(11)}, /* Primux */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */
+
+	/* Cards with HFC-8S Chip */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_SUBDEVICE_ID_CCD_BN8S, 0, 0, H(12)}, /* BN8S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_SUBDEVICE_ID_CCD_BN8SP, 0, 0, H(13)}, /* BN8S+ */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)},
+	    /* IOB8ST Recording */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST  */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB8ST_1, 0, 0, H(17)}, /* IOB8ST  */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */
+
+
+	/* Cards with HFC-E1 Chip */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1, 0, 0, H(19)}, /* BNE1 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1M, 0, 0, H(20)}, /* BNE1 mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1DP, 0, 0, H(21)}, /* BNE1 + (Dual) */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1D, 0, 0, H(22)}, /* BNE1 (Dual) */
+
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_DEVICE_ID_CCD_HFCE1, 0, 0, H(23)}, /* Old Eval */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB1E1, 0, 0, H(24)}, /* IOB1E1 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_HFCE1, 0, 0, H(25)}, /* E1 */
+
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, 0},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, 0},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, 0},
+	{0, }
+};
+#undef H
+
+MODULE_DEVICE_TABLE(pci, hfmultipci_ids);
+
+static int
+hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct hm_map	*m = (struct hm_map *)ent->driver_data;
+	int		ret;
+
+	if (m == NULL) {
+		if (ent->vendor == PCI_VENDOR_ID_CCD)
+			if (ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
+			    ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
+			    ent->device == PCI_DEVICE_ID_CCD_HFCE1)
+				printk(KERN_ERR
+				    "unknown HFC multiport controller "
+				    "(vendor:%x device:%x subvendor:%x "
+				    "subdevice:%x) Please contact the "
+				    "driver maintainer for support.\n",
+				    ent->vendor, ent->device,
+				    ent->subvendor, ent->subdevice);
+		return -ENODEV;
+	}
+	ret = hfcmulti_init(pdev, ent);
+	if (ret)
+		return ret;
+	HFC_cnt++;
+	printk(KERN_INFO "%d devices registered\n", HFC_cnt);
+	return 0;
+}
+
+static struct pci_driver hfcmultipci_driver = {
+	.name		= "hfc_multi",
+	.probe		= hfcmulti_probe,
+	.remove		= __devexit_p(hfc_remove_pci),
+	.id_table	= hfmultipci_ids,
+};
+
+static void __exit
+HFCmulti_cleanup(void)
+{
+	struct hfc_multi *card, *next;
+
+	/* unload interrupt function symbol */
+	if (hfc_interrupt)
+		symbol_put(ztdummy_extern_interrupt);
+	if (register_interrupt)
+		symbol_put(ztdummy_register_interrupt);
+	if (unregister_interrupt) {
+		if (interrupt_registered) {
+			interrupt_registered = 0;
+			unregister_interrupt();
+		}
+		symbol_put(ztdummy_unregister_interrupt);
+	}
+
+	list_for_each_entry_safe(card, next, &HFClist, list)
+		release_card(card);
+	/* get rid of all devices of this driver */
+	pci_unregister_driver(&hfcmultipci_driver);
+}
+
+static int __init
+HFCmulti_init(void)
+{
+	int err;
+
+#ifdef IRQ_DEBUG
+	printk(KERN_ERR "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
+#endif
+
+	spin_lock_init(&HFClock);
+	spin_lock_init(&plx_lock);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: init entered\n", __func__);
+
+#ifdef __BIG_ENDIAN
+#error "not running on big endian machines now"
+#endif
+	hfc_interrupt = symbol_get(ztdummy_extern_interrupt);
+	register_interrupt = symbol_get(ztdummy_register_interrupt);
+	unregister_interrupt = symbol_get(ztdummy_unregister_interrupt);
+	printk(KERN_INFO "mISDN: HFC-multi driver %s\n",
+	    hfcmulti_revision);
+
+	switch (poll) {
+	case 0:
+		poll_timer = 6;
+		poll = 128;
+		break;
+		/*
+		 * wenn dieses break nochmal verschwindet,
+		 * gibt es heisse ohren :-)
+		 * "without the break you will get hot ears ???"
+		 */
+	case 8:
+		poll_timer = 2;
+		break;
+	case 16:
+		poll_timer = 3;
+		break;
+	case 32:
+		poll_timer = 4;
+		break;
+	case 64:
+		poll_timer = 5;
+		break;
+	case 128:
+		poll_timer = 6;
+		break;
+	case 256:
+		poll_timer = 7;
+		break;
+	default:
+		printk(KERN_ERR
+		    "%s: Wrong poll value (%d).\n", __func__, poll);
+		err = -EINVAL;
+		return err;
+
+	}
+
+	err = pci_register_driver(&hfcmultipci_driver);
+	if (err < 0) {
+		printk(KERN_ERR "error registering pci driver: %x\n", err);
+		if (hfc_interrupt)
+			symbol_put(ztdummy_extern_interrupt);
+		if (register_interrupt)
+			symbol_put(ztdummy_register_interrupt);
+		if (unregister_interrupt) {
+			if (interrupt_registered) {
+				interrupt_registered = 0;
+				unregister_interrupt();
+			}
+			symbol_put(ztdummy_unregister_interrupt);
+		}
+		return err;
+	}
+	return 0;
+}
+
+
+module_init(HFCmulti_init);
+module_exit(HFCmulti_cleanup);